Netdev List
 help / color / mirror / Atom feed
* [PATCH net v2 0/4] net: dsa: motorcomm: FDB fixup
@ 2026-11-16 16:01 David Yang
  2026-11-16 16:01 ` [PATCH net v2 1/4] net: dsa: motorcomm: Do not inherit ports from dynamic FDB entries David Yang
                   ` (3 more replies)
  0 siblings, 4 replies; 5+ messages in thread
From: David Yang @ 2026-11-16 16:01 UTC (permalink / raw)
  To: netdev
  Cc: David Yang, Andrew Lunn, Vladimir Oltean, David S. Miller,
	Eric Dumazet, Jakub Kicinski, Paolo Abeni, linux-kernel

Various FDB defects. Assisted and verified on the hardware by LLM.

There are more gotchas about multi-bridge setup, but I'd leave that for
net-next since multi-bridge has always been tricky among DSA drivers.

v2:
 - include the CPU port when rewriting FDB entry
 - read the port PVID instead of bridge's
 - fix PVID when port joining/leaving bridge
v1: https://lore.kernel.org/r/20261111234110.1449602-1-mmyangfl@gmail.com

David Yang (4):
  net: dsa: motorcomm: Do not inherit ports from dynamic FDB entries
  net: dsa: motorcomm: Rewrite FDB entry on port migration
  net: dsa: motorcomm: Read the port PVID instead of bridge's
  net: dsa: motorcomm: Use VID 0 as the unaware PVID

 drivers/net/dsa/motorcomm/chip.c | 160 +++++++++++++++++--------------
 1 file changed, 86 insertions(+), 74 deletions(-)

-- 
2.53.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2026-11-16 16:02 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-16 16:01 [PATCH net v2 0/4] net: dsa: motorcomm: FDB fixup David Yang
2026-11-16 16:01 ` [PATCH net v2 1/4] net: dsa: motorcomm: Do not inherit ports from dynamic FDB entries David Yang
2026-11-16 16:01 ` [PATCH net v2 2/4] net: dsa: motorcomm: Rewrite FDB entry on port migration David Yang
2026-11-16 16:01 ` [PATCH net v2 3/4] net: dsa: motorcomm: Read the port PVID instead of bridge's David Yang
2026-11-16 16:01 ` [PATCH net v2 4/4] net: dsa: motorcomm: Use VID 0 as the unaware PVID David Yang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox