* Fw:Some question about 802.1Q VLAN
@ 2015-02-12 6:39 安理 李剑
0 siblings, 0 replies; 3+ messages in thread
From: 安理 李剑 @ 2015-02-12 6:39 UTC (permalink / raw)
To: netdev
HI…I am a Linux VLAN user. Now, I encounter some question about 802.1Q VLAN in my wireless AP. My Linux kernel version is 2.6.31.
Plese see my setting:
vconfig add eth0 10
vconfig add ath0 10
ifconfig eth0.10 up
ifconfig ath0.10 up
brctl addbr br0
brctl addbr br1
brctl addif br0 ath0
brctl addif br0 eth0
brctl addif br1 ath0.10
brctl addif br1 eth0.10
ifconfig br0 up
ifconfig br1 up
The eth0 and ath0 is real network card in my AP,and the ath0 is the wireless card.
Question:
Two station associate AP by wireless,the two station and AP use same VLAN setting like my describe.One station br0 Ip address is 192.168.1.10/24,br1 ip address is 192.168.2.10/24;other station br0 ip address is 192.169.1.11/24, br1 ip address is 192.168.2.12/24.The AP is used bridge the data from station.
But now use station1 ping station2: ping 192.168.1.11,it is successed; ping 192.168.2.12,it is failed!!!
I don’t know the reason about the fail situation ,I need some help.
Thank you!
^ permalink raw reply [flat|nested] 3+ messages in thread* Fw:Some question about 802.1Q VLAN
@ 2015-02-12 0:58 安理 李剑
0 siblings, 0 replies; 3+ messages in thread
From: 安理 李剑 @ 2015-02-12 0:58 UTC (permalink / raw)
To: netdev
HI…I am a Linux VLAN user. Now, I encounter some question about 802.1Q VLAN in my wireless AP. My Linux kernel version is 2.6.31.
Plese see my setting:
vconfig add eth0 10
vconfig add ath0 10
ifconfig eth0.10 up
ifconfig ath0.10 up
brctl addbr br0
brctl addbr br1
brctl addif br0 ath0
brctl addif br0 eth0
brctl addif br1 ath0.10
brctl addif br1 eth0.10
ifconfig br0 up
ifconfig br1 up
The eth0 and ath0 is real network card in my AP,and the ath0 is the wireless card.
Question:
Two station associate AP by wireless,the two station and AP use same VLAN setting like my describe.One station br0 Ip address is 192.168.1.10/24,br1 ip address is 192.168.2.10/24;other station br0 ip address is 192.169.1.11/24, br1 ip address is 192.168.2.12/24.The AP is used bridge the data from station.
But now use station1 ping station2: ping 192.168.1.11,it is successed; ping 192.168.2.12,it is failed!!!
I don’t know the reason about the fail situation ,I need some help.
Thank you!
^ permalink raw reply [flat|nested] 3+ messages in thread* Fw:Some question about 802.1Q VLAN
@ 2015-02-10 6:47 安理 李剑
0 siblings, 0 replies; 3+ messages in thread
From: 安理 李剑 @ 2015-02-10 6:47 UTC (permalink / raw)
To: netdev
HI…I am a Linux VLAN user. Now, I encounter some question about 802.1Q VLAN in my wireless AP. My Linux kernel version is 2.6.31.
Plese see my setting:
vconfig add eth0 10
vconfig add ath0 10
ifconfig eth0.10 up
ifconfig ath0.10 up
brctl addbr br0
brctl addbr br1
brctl addif br0 ath0
brctl addif br0 eth0
brctl addif br1 ath0.10
brctl addif br1 eth0.10
ifconfig br0 up
ifconfig br1 up
The eth0 and ath0 is real network card in my AP,and the ath0 is the wireless card.
Question:
Two station associate AP by wireless,the two station and AP use same VLAN setting like my describe.One station br0 Ip address is 192.168.1.10/24,br1 ip address is 192.168.2.10/24;other station br0 ip address is 192.169.1.11/24, br1 ip address is 192.168.2.12/24.The AP is used bridge the data from station.
But now use station1 ping station2: ping 192.168.1.11,it is successed; ping 192.168.2.12,it is failed!!!
I don’t know the reason about the fail situation ,I need some help.
Thank you!
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-02-12 6:54 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-02-12 6:39 Fw:Some question about 802.1Q VLAN 安理 李剑
-- strict thread matches above, loose matches on Subject: below --
2015-02-12 0:58 安理 李剑
2015-02-10 6:47 安理 李剑
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox