Scatter gather and TCP MD5

Scatter gather and TCP MD5

[Siddharth Taneja]

Hello,

I am using a vanilla 2.6.22.1 kernel and I see the same kind of
problem as had been mentioned some time back on this list

http://lkml.org/lkml/2007/5/22/45

The issue is essentially that with the MD5 option enabled for the
specific TCP connection, the SYN and SYN-ACKS are passed ok and the
connection establishes fine, but the other end (a cisco router)
complains about incorrect MD5 signatures on any other message that is
sent after this.

Setting the scatter-gather offloading option to off on the NIC seems to
correct this problem. Recently I had seen a checkin (as a response to
the problem mentioned in the above link) where the TSO option was
turned off to make MD5 work (my kernel has that fix). Is a similar
solution needed here too?

This is the information about my system:
> uname -a
Linux stdalone 2.6.22.1 #1 SMP Mon Jul 23 20:15:21 PDT 2007 i686 i686
i386 GNU/Linux

> ethtool -i eth0
driver: e1000
version: 7.3.20-k2
firmware-version: N/A
bus-info: 0000:01:0a.0

> ethtool -k eth0
Offload parameters for eth0:
rx-checksumming: on
tx-checksumming: on
scatter-gather: off
tcp segmentation offload: off

Thanks for your help.

Siddharth

PS: I would like to be CC'ed on the reply to this email. Thanks.