[PATCH net-next] net: dsa: realtek: rtl8365mb: use devm_mutex_init

[PATCH net-next] net: dsa: realtek: rtl8365mb: use devm_mutex_init

[Luiz Angelo Daros de Luca]

mutex_destroy() is needed while debugging mutex. Instead of calling it
directly on driver .remove(), just use devm.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
---
 drivers/net/dsa/realtek/rtl8365mb_main.c | 15 ++++++++++++---
 drivers/net/dsa/realtek/rtl83xx.c        | 14 +++++++++++---
 2 files changed, 23 insertions(+), 6 deletions(-)

diff --git a/drivers/net/dsa/realtek/rtl8365mb_main.c b/drivers/net/dsa/realtek/rtl8365mb_main.c
index 5ac091bf93c9..c787fdb75413 100644
--- a/drivers/net/dsa/realtek/rtl8365mb_main.c
+++ b/drivers/net/dsa/realtek/rtl8365mb_main.c
@@ -1988,16 +1988,19 @@ static void rtl8365mb_get_stats64(struct dsa_switch *ds, int port,
 	spin_unlock(&p->stats_lock);
 }
 
-static void rtl8365mb_stats_setup(struct realtek_priv *priv)
+static int rtl8365mb_stats_setup(struct realtek_priv *priv)
 {
 	struct rtl8365mb *mb = priv->chip_data;
 	struct dsa_switch *ds = &priv->ds;
 	struct dsa_port *dp;
+	int ret;
 
 	/* Per-chip global mutex to protect MIB counter access, since doing
 	 * so requires accessing a series of registers in a particular order.
 	 */
-	mutex_init(&mb->mib_lock);
+	ret = devm_mutex_init(priv->dev, &mb->mib_lock);
+	if (ret)
+		return ret;
 
 	dsa_switch_for_each_available_port(dp, ds) {
 		struct rtl8365mb_port *p = &mb->ports[dp->index];
@@ -2010,6 +2013,8 @@ static void rtl8365mb_stats_setup(struct realtek_priv *priv)
 		 */
 		INIT_DELAYED_WORK(&p->mib_work, rtl8365mb_stats_poll);
 	}
+
+	return 0;
 }
 
 static void rtl8365mb_stats_teardown(struct realtek_priv *priv)
@@ -2567,7 +2572,11 @@ static int rtl8365mb_setup(struct dsa_switch *ds)
 	}
 
 	/* Start statistics counter polling */
-	rtl8365mb_stats_setup(priv);
+	ret = rtl8365mb_stats_setup(priv);
+	if (ret) {
+		dev_err(priv->dev, "failed to setup stats\n");
+		goto out_teardown_irq;
+	}
 
 	return 0;
 
diff --git a/drivers/net/dsa/realtek/rtl83xx.c b/drivers/net/dsa/realtek/rtl83xx.c
index 90843d52c5a8..35df809a5951 100644
--- a/drivers/net/dsa/realtek/rtl83xx.c
+++ b/drivers/net/dsa/realtek/rtl83xx.c
@@ -156,9 +156,17 @@ rtl83xx_probe(struct device *dev,
 	if (!priv)
 		return ERR_PTR(-ENOMEM);
 
-	mutex_init(&priv->map_lock);
-	mutex_init(&priv->vlan_lock);
-	mutex_init(&priv->l2_lock);
+	ret = devm_mutex_init(dev, &priv->map_lock);
+	if (ret)
+		return ERR_PTR(ret);
+
+	ret = devm_mutex_init(dev, &priv->vlan_lock);
+	if (ret)
+		return ERR_PTR(ret);
+
+	ret = devm_mutex_init(dev, &priv->l2_lock);
+	if (ret)
+		return ERR_PTR(ret);
 
 	rc.lock_arg = priv;
 	priv->map = devm_regmap_init(dev, NULL, priv, &rc);

---
base-commit: ce6b4d3216b63f902bb8e9695ee6c10c83415f65
change-id: 20260718-realtek_mutext-41a072e5cd24

Best regards,
--  
Luiz Angelo Daros de Luca <luizluca@gmail.com>

Re: [PATCH net-next] net: dsa: realtek: rtl8365mb: use devm_mutex_init

[Qingfang Deng]

Hi Luiz,

On 7/18/2026 1:59 PM, Luiz Angelo Daros de Luca wrote:
> mutex_destroy() is needed while debugging mutex. Instead of calling it
> directly on driver .remove(), just use devm.
> 
> Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
> ---
>   drivers/net/dsa/realtek/rtl8365mb_main.c | 15 ++++++++++++---
>   drivers/net/dsa/realtek/rtl83xx.c        | 14 +++++++++++---
>   2 files changed, 23 insertions(+), 6 deletions(-)

As you're fixing a missing teardown, and the two files were introduced 
at different times, you should split your patch into two (one for each 
file), re-target your series to the "net" tree, and add a Fixes tag 
respectively.

Best regards,
Qingfang