From: Javen <javen_xu@realsil.com.cn>
To: Jakub Kicinski <kuba@kernel.org>
Cc: "hkallweit1@gmail.com" <hkallweit1@gmail.com>,
"nic_swsd@realtek.com" <nic_swsd@realtek.com>,
"andrew+netdev@lunn.ch" <andrew+netdev@lunn.ch>,
"davem@davemloft.net" <davem@davemloft.net>,
"edumazet@google.com" <edumazet@google.com>,
"pabeni@redhat.com" <pabeni@redhat.com>,
"horms@kernel.org" <horms@kernel.org>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: RE: [PATCH net-next v10 5/7] r8169: add support and enable rss
Date: Thu, 13 Aug 2026 07:38:28 +0000 [thread overview]
Message-ID: <8c27bce593a34ebc94dec7577f96f758@realsil.com.cn> (raw)
In-Reply-To: <20260810143825.28a3d516@kernel.org>
>
>On Mon, 3 Aug 2026 10:13:03 +0800 javen wrote:
>> From: Javen Xu <javen_xu@realsil.com.cn>
>>
>> This patch adds support and enable rss for RTL8127.
>>
>> Signed-off-by: Javen Xu <javen_xu@realsil.com.cn>
>> ---
>> Changes in v2:
>> - some changes moved from Patch 2/7
>>
>> Changes in v3:
>> - add struct rtl8169_rss_data. Allocate it dynamically when needed.
>> - define rss_key as an u32 array
>> - replace some magic bit numbers in rtl8169_set_rss_hash_opt() and
>> rtl8125_set_rx_q_num()
>> - use union to combine different rx descriptor, refactor struct
>> RxDesc
>> - remove dead code from rtl8169_double_check_rss_support()
>>
>> Changes in v4:
>> - rename macro definition, e.g R8127_MAX_IRQ to
>R8127_MAX_NUM_IRQVEC
>> - change hw_supp_indir_tbl_entries type to unsigned int
>> - change init_rx_desc_type type to enum
>> - remove rtl_check_rss_support(), add helper function
>> rtl_hw_support_rss()
>> - remove hw_curr_isr_ver, use irq_nvecs to judge whether we should
>> enable vector interrupt mapping, use tp->num_rx_ring to judge whether
>> we should enable rss
>> - remove function rtl8169_double_check_rss_support(), use
>> rtl8169_set_rx_ring_num() to set num_rx_ring according to
>> tp->irq_nvecs
>>
>> Changes in v5:
>> - no changes
>>
>> Changes in v6:
>> - change rss_queue_num type from u8 to unsigned int
>> - fix rx desc clear in rtl8169_rx_clear() for different desc type
>> - clamping num_rx_ring with rounddown_pow_of_two()
>>
>> Changes in v7:
>> - remove unused macro
>> - change unfixed type in rtl8169_store_reta
>>
>> Changes in v8:
>> - refill desc->addr when rx_desc reset
>> - rtl8169_set_channels fixed in patch 7/7
>>
>> Changes in v9:
>> - remove rtl8169_set_desc_dma_addr, only set desc dma addr for
>> RX_DESC_TYPE_RSS desc
>>
>> Changes in v10:
>> - Change rss_key to u8 array and write rss_key_reg as u32 values.
>> Use get_unaligned_le32() to keep behavior consistent on big-endian
>> and little-endian
>> ---
>> drivers/net/ethernet/realtek/r8169_main.c | 379
>> ++++++++++++++++++++--
>> 1 file changed, 346 insertions(+), 33 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/realtek/r8169_main.c
>> b/drivers/net/ethernet/realtek/r8169_main.c
>> index 31f6d0c2e3d1..4e571fcea092 100644
>> --- a/drivers/net/ethernet/realtek/r8169_main.c
>> +++ b/drivers/net/ethernet/realtek/r8169_main.c
>> @@ -88,6 +88,19 @@
>> #define R8127_MAX_TX_QUEUES 8
>> #define R8169_DEFAULT_RX_QUEUES 1
>> #define R8169_MAX_TX_QUEUES 1
>> +#define R8127_MAX_NUM_IRQVEC 32
>> +#define R8127_MIN_NUM_IRQVEC 30
>> +#define R8169_IRQ_DEFAULT 1
>> +#define RTL_RSS_KEY_SIZE 40
>> +#define RSS_CPU_NUM_MASK GENMASK(18, 16)
>> +#define RSS_HASH_MASK GENMASK(10, 8)
>> +#define RTL_MAX_INDIRECTION_TABLE_ENTRIES 128
>> +#define RXS_RSS_UDP BIT(27)
>> +#define RXS_RSS_IPV4 BIT(28)
>> +#define RXS_RSS_IPV6 BIT(29)
>> +#define RXS_RSS_TCP BIT(30)
>> +#define RXS_RSS_L3_TYPE_MASK (RXS_RSS_IPV4 | RXS_RSS_IPV6) #define
>> +RXS_RSS_L4_TYPE_MASK (RXS_RSS_TCP | RXS_RSS_UDP)
>>
>> #define OCP_STD_PHY_BASE 0xa400
>>
>> @@ -595,6 +608,20 @@ enum rtl_register_content {
>> #define ISRIMR_LINKCHG BIT(29)
>> #define ISRIMR_TOK_Q0 BIT(8)
>> #define ISRIMR_ROK_Q0 BIT(0)
>> +#define RTL_DESC_TYPE_CTRL 0xd8
>> +#define RSS_KEY_REG 0x4600
>> +#define RSS_INDIRECTION_TBL_REG 0x4700
>> +#define RSS_CTRL_TCP_IPV4_SUPP BIT(0)
>> +#define RTL_DESC_TYPE_RSS BIT(1)
>> +#define RSS_CTRL_IPV4_SUPP BIT(1)
>> +#define RSS_CTRL_TCP_IPV6_SUPP BIT(2)
>> +#define RSS_CTRL_IPV6_SUPP BIT(3)
>> +#define RSS_CTRL_IPV6_EXT_SUPP BIT(4)
>> +#define RSS_CTRL_TCP_IPV6_EXT_SUPP BIT(5)
>> +#define RX_RES_RSS BIT(22)
>> +#define RX_RUNT_RSS BIT(21)
>> +#define RX_CRC_RSS BIT(20)
>> +#define RTL_RX_Q_NUM_MASK GENMASK(4, 2)
>> };
>>
>> enum rtl_desc_bit {
>> @@ -652,6 +679,11 @@ enum rtl_rx_desc_bit {
>> #define RxProtoIP (PID1 | PID0)
>> #define RxProtoMask RxProtoIP
>>
>> +#define RX_UDPT_DESC_RSS BIT(19)
>> +#define RX_TCPT_DESC_RSS BIT(18)
>> +#define RX_UDPF_DESC_RSS BIT(16) /* UDP/IP checksum failed */
>> +#define RX_TCPF_DESC_RSS BIT(15) /* TCP/IP checksum failed */
>> +
>> IPFail = (1 << 16), /* IP checksum failed */
>> UDPFail = (1 << 15), /* UDP/IP checksum failed */
>> TCPFail = (1 << 14), /* TCP/IP checksum failed */
>> @@ -673,9 +705,27 @@ struct TxDesc {
>> };
>>
>> struct RxDesc {
>> - __le32 opts1;
>> - __le32 opts2;
>> - __le64 addr;
>> + union {
>> + /* RX_DESC_TYPE_DEFAULT */
>> + struct {
>> + __le32 opts1;
>> + __le32 opts2;
>> + __le64 addr;
>> + };
>> +
>> + /* RX_DESC_TYPE_RSS */
>> + struct {
>> + union {
>> + __le64 rss_addr;
>> + struct {
>> + __le32 rss_info;
>> + __le32 rss_result;
>> + } rss_dword;
>> + };
>> + __le32 rss_opts2;
>> + __le32 rss_opts1;
>> + };
>> + };
>> };
>>
>> struct ring_info {
>> @@ -747,6 +797,11 @@ enum rtl_dash_type {
>> RTL_DASH_25_BP,
>> };
>>
>> +enum rx_desc_type {
>> + RX_DESC_TYPE_DEFAULT,
>> + RX_DESC_TYPE_RSS,
>> +};
>> +
>> struct rtl8169_rx_ring {
>> u32 cur_rx; /* Index of next Rx pkt. */
>> u32 dirty_rx; /* Index for recycling. */
>> @@ -756,6 +811,12 @@ struct rtl8169_rx_ring {
>> struct page *rx_databuff[NUM_RX_DESC]; /* Rx data buffers */
>> };
>>
>> +struct rtl8169_rss_data {
>> + u8 rss_key[RTL_RSS_KEY_SIZE];
>> + u8 rss_indir_tbl[RTL_MAX_INDIRECTION_TABLE_ENTRIES];
>> + unsigned int hw_supp_indir_tbl_entries; };
>> +
>> struct rtl8169_private {
>> void __iomem *mmio_addr; /* memory map physical address */
>> struct pci_dev *pci_dev;
>> @@ -775,7 +836,9 @@ struct rtl8169_private {
>> u16 tx_lpi_timer;
>> u32 irq_mask;
>> unsigned int hw_supp_num_rx_queues;
>> + struct rtl8169_rss_data *rss_data;
>> unsigned int irq_nvecs;
>> + enum rx_desc_type init_rx_desc_type;
>> struct clk *clk;
>>
>> struct {
>> @@ -1605,6 +1668,11 @@ static bool rtl_dash_is_enabled(struct
>rtl8169_private *tp)
>> }
>> }
>>
>> +static bool rtl_hw_support_rss(struct rtl8169_private *tp) {
>> + return tp->mac_version == RTL_GIGA_MAC_VER_80; }
>> +
>> static enum rtl_dash_type rtl_get_dash_type(struct rtl8169_private
>> *tp) {
>> switch (tp->mac_version) {
>> @@ -1906,9 +1974,20 @@ static inline u32 rtl8169_tx_vlan_tag(struct
>sk_buff *skb)
>> TxVlanTag | swab16(skb_vlan_tag_get(skb)) : 0x00; }
>>
>> -static void rtl8169_rx_vlan_tag(struct RxDesc *desc, struct sk_buff
>> *skb)
>> +static void rtl8169_rx_vlan_tag(struct rtl8169_private *tp,
>> + struct RxDesc *desc,
>> + struct sk_buff *skb)
>> {
>> - u32 opts2 = le32_to_cpu(desc->opts2);
>> + u32 opts2;
>> +
>> + switch (tp->init_rx_desc_type) {
>> + case RX_DESC_TYPE_RSS:
>> + opts2 = le32_to_cpu(desc->rss_opts2);
>> + break;
>> + default:
>> + opts2 = le32_to_cpu(desc->opts2);
>> + break;
>> + }
>>
>> if (opts2 & RxVlanTag)
>> __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
>> swab16(opts2 & 0xffff)); @@ -2736,17 +2815,27 @@ static void
>rtl_hw_reset(struct rtl8169_private *tp)
>> rtl_loop_wait_low(tp, &rtl_chipcmd_cond, 100, 100); }
>>
>> +static void rtl8169_init_rss(struct rtl8169_private *tp) {
>> + for (int i = 0; i < tp->rss_data->hw_supp_indir_tbl_entries; i++)
>> + tp->rss_data->rss_indir_tbl[i] =
>> +ethtool_rxfh_indir_default(i, tp->num_rx_rings);
>> +
>> + netdev_rss_key_fill(tp->rss_data->rss_key, RTL_RSS_KEY_SIZE); }
>> +
>> static void rtl_setup_rx_params(struct rtl8169_private *tp) {
>> tp->num_rx_rings = 1;
>> switch (tp->mac_version) {
>> case RTL_GIGA_MAC_VER_80:
>> tp->hw_supp_num_rx_queues = R8169_MAX_RX_QUEUES;
>> + tp->rss_data->hw_supp_indir_tbl_entries =
>> + RTL_MAX_INDIRECTION_TABLE_ENTRIES;
>> break;
>> default:
>> tp->hw_supp_num_rx_queues = R8169_DEFAULT_RX_QUEUES;
>> break;
>> }
>> + tp->init_rx_desc_type = RX_DESC_TYPE_DEFAULT;
>> }
>>
>> static void rtl_request_firmware(struct rtl8169_private *tp) @@
>> -2871,6 +2960,58 @@ static void rtl_set_rx_max_size(struct rtl8169_private
>*tp)
>> RTL_W16(tp, RxMaxSize, R8169_RX_BUF_SIZE + 1); }
>>
>> +static void rtl8169_store_rss_key(struct rtl8169_private *tp) {
>> + u8 *rss_key = tp->rss_data->rss_key;
>> + const u16 rss_key_reg = RSS_KEY_REG;
>> +
>> + /* Write redirection table to HW */
>> + for (int i = 0; i < RTL_RSS_KEY_SIZE; i += sizeof(u32))
>> + RTL_W32(tp, rss_key_reg + i, get_unaligned_le32(rss_key
>> + + i));
>
>you fetched packed word of the key with get_unaligned_le32()..
>
>> +}
>> +
>> +static void rtl8169_store_reta(struct rtl8169_private *tp) {
>> + u8 *indir_tbl = tp->rss_data->rss_indir_tbl;
>> + unsigned int i;
>> +
>> + /* Write redirection table to HW */
>> + for (i = 0; i < tp->rss_data->hw_supp_indir_tbl_entries; i += 4) {
>> + u32 reta = (u32)indir_tbl[i] |
>> + (u32)indir_tbl[i + 1] << 8 |
>> + (u32)indir_tbl[i + 2] << 16 |
>> + (u32)indir_tbl[i + 3] << 24;
>
>.. but the indir table you pack manually, why?
>
>> + RTL_W32(tp, RSS_INDIRECTION_TBL_REG + i, reta);
>> + }
>> +}
>> +
>> +static void rtl8169_set_rss_hash_opt(struct rtl8169_private *tp) {
>> + u32 rss_ctrl;
>> +
>> + rss_ctrl = FIELD_PREP(RSS_CPU_NUM_MASK,
>> + ilog2(tp->num_rx_rings));
>> +
>> + /* Perform hash on these packet types */
>> + rss_ctrl |= RSS_CTRL_TCP_IPV4_SUPP
>> + | RSS_CTRL_IPV4_SUPP
>> + | RSS_CTRL_IPV6_SUPP
>> + | RSS_CTRL_IPV6_EXT_SUPP
>> + | RSS_CTRL_TCP_IPV6_SUPP
>> + | RSS_CTRL_TCP_IPV6_EXT_SUPP;
>
>| should be at the end of the lines
>
>> + rss_ctrl |= FIELD_PREP(RSS_HASH_MASK,
>> +
>> + ilog2(tp->rss_data->hw_supp_indir_tbl_entries));
>> +
>> + RTL_W32(tp, RSS_CTRL_8125, rss_ctrl); }
>> +
>> +static void rtl_set_rss_config(struct rtl8169_private *tp) {
>> + rtl8169_set_rss_hash_opt(tp);
>> + rtl8169_store_reta(tp);
>> + rtl8169_store_rss_key(tp);
>> +}
>
>> + /* enable rx descriptor type v4 and set queue num for rss*/
>
>nit: missing space at the end of the comment
>
>
>> - nvecs = pci_alloc_irq_vectors(pdev, 1, 1, flags);
>> + nvecs = pci_alloc_irq_vectors(pdev, get_min_irq_nvecs(tp),
>> + get_max_irq_nvecs(tp), flags);
>> +
>> + if (nvecs < 0)
>> + nvecs = pci_alloc_irq_vectors(pdev, 1, 1, flags);
>
>Why the two calls to pci_alloc_irq_vectors() ?
>It should select the best number of IRQs it can, so why not just call
>
> pci_alloc_irq_vectors(pdev, 1, get_max_irq_nvecs(tp), flags);
>
Hardware limitation. When we try to enable rss, we should use new interrupt mapping. New interrupt 0-7 is used for rx, 8-15 is used for tx, and linkchg interrupt is fixed at 29. So the min irq number for RTL8127 to enable rss is 30, not 1.
I will add this explanation in the code.
Thanks,
Javen
>note: please review the submission for unnecessarily going over 80 chars, we
>still prefer <=80 lines in netdev
>
>> if (nvecs < 0)
>> return nvecs;
next prev parent reply other threads:[~2026-08-13 7:39 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-03 2:12 [PATCH net-next v10 0/7] r8169: add RSS support for RTL8127 javen
2026-08-03 2:12 ` [PATCH net-next v10 1/7] r8169: add support for multi irqs javen
2026-08-03 2:13 ` [PATCH net-next v10 2/7] r8169: refactor RX path to prepare for multi-queue javen
2026-08-10 21:26 ` Jakub Kicinski
2026-08-03 2:13 ` [PATCH net-next v10 3/7] r8169: add support for new interrupt mapping javen
2026-08-10 21:29 ` Jakub Kicinski
2026-08-03 2:13 ` [PATCH net-next v10 4/7] r8169: enable " javen
2026-08-10 21:31 ` Jakub Kicinski
2026-08-03 2:13 ` [PATCH net-next v10 5/7] r8169: add support and enable rss javen
2026-08-10 21:31 ` Jakub Kicinski
2026-08-10 21:38 ` Jakub Kicinski
2026-08-13 7:38 ` Javen [this message]
2026-08-03 2:13 ` [PATCH net-next v10 6/7] r8169: move struct ethtool_ops javen
2026-08-03 2:13 ` [PATCH net-next v10 7/7] r8169: support setting rx queue numbers via ethtool javen
2026-08-10 21:41 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8c27bce593a34ebc94dec7577f96f758@realsil.com.cn \
--to=javen_xu@realsil.com.cn \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nic_swsd@realtek.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox