From: Jiri Pirko <jiri@resnulli.us>
To: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Cc: intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
pawel.chmielewski@intel.com, sridhar.samudrala@intel.com,
jacob.e.keller@intel.com, pio.raczynski@gmail.com,
konrad.knitter@intel.com, marcin.szycik@intel.com,
wojciech.drewek@intel.com, nex.sw.ncis.nat.hpm.dev@intel.com,
przemyslaw.kitszel@intel.com
Subject: Re: [iwl-next v3 1/8] ice: devlink PF MSI-X max and min parameter
Date: Thu, 8 Aug 2024 17:34:35 +0200 [thread overview]
Message-ID: <ZrTli6UxMkzE31TH@nanopsycho.orion> (raw)
In-Reply-To: <20240808072016.10321-2-michal.swiatkowski@linux.intel.com>
Thu, Aug 08, 2024 at 09:20:09AM CEST, michal.swiatkowski@linux.intel.com wrote:
>Use generic devlink PF MSI-X parameter to allow user to change MSI-X
>range.
>
>Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
>Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
>---
> .../net/ethernet/intel/ice/devlink/devlink.c | 56 ++++++++++++++++++-
> drivers/net/ethernet/intel/ice/ice.h | 8 +++
> drivers/net/ethernet/intel/ice/ice_irq.c | 14 ++++-
> 3 files changed, 76 insertions(+), 2 deletions(-)
>
>diff --git a/drivers/net/ethernet/intel/ice/devlink/devlink.c b/drivers/net/ethernet/intel/ice/devlink/devlink.c
>index 29a5f822cb8b..bdc22ea13e0f 100644
>--- a/drivers/net/ethernet/intel/ice/devlink/devlink.c
>+++ b/drivers/net/ethernet/intel/ice/devlink/devlink.c
>@@ -1518,6 +1518,32 @@ static int ice_devlink_local_fwd_validate(struct devlink *devlink, u32 id,
> return 0;
> }
>
>+static int
>+ice_devlink_msix_max_pf_validate(struct devlink *devlink, u32 id,
>+ union devlink_param_value val,
>+ struct netlink_ext_ack *extack)
>+{
>+ if (val.vu16 > ICE_MAX_MSIX) {
>+ NL_SET_ERR_MSG_MOD(extack, "PF max MSI-X is too high");
No reason to have "PF" in the text. Also, no reason to have "max MSI-X".
That is the name of the param.
>+ return -EINVAL;
>+ }
>+
>+ return 0;
>+}
>+
>+static int
>+ice_devlink_msix_min_pf_validate(struct devlink *devlink, u32 id,
>+ union devlink_param_value val,
>+ struct netlink_ext_ack *extack)
>+{
>+ if (val.vu16 <= ICE_MIN_MSIX) {
>+ NL_SET_ERR_MSG_MOD(extack, "PF min MSI-X is too low");
Same comment as for max goes here.
>+ return -EINVAL;
>+ }
>+
>+ return 0;
>+}
>+
> enum ice_param_id {
> ICE_DEVLINK_PARAM_ID_BASE = DEVLINK_PARAM_GENERIC_ID_MAX,
> ICE_DEVLINK_PARAM_ID_TX_SCHED_LAYERS,
>@@ -1535,6 +1561,15 @@ static const struct devlink_param ice_dvl_rdma_params[] = {
> ice_devlink_enable_iw_validate),
> };
>
>+static const struct devlink_param ice_dvl_msix_params[] = {
>+ DEVLINK_PARAM_GENERIC(MSIX_VEC_PER_PF_MAX,
>+ BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
>+ NULL, NULL, ice_devlink_msix_max_pf_validate),
>+ DEVLINK_PARAM_GENERIC(MSIX_VEC_PER_PF_MIN,
>+ BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
>+ NULL, NULL, ice_devlink_msix_min_pf_validate),
>+};
>+
> static const struct devlink_param ice_dvl_sched_params[] = {
> DEVLINK_PARAM_DRIVER(ICE_DEVLINK_PARAM_ID_TX_SCHED_LAYERS,
> "tx_scheduling_layers",
>@@ -1637,6 +1672,7 @@ void ice_devlink_unregister(struct ice_pf *pf)
> int ice_devlink_register_params(struct ice_pf *pf)
> {
> struct devlink *devlink = priv_to_devlink(pf);
>+ union devlink_param_value value;
> struct ice_hw *hw = &pf->hw;
> int status;
>
>@@ -1645,11 +1681,27 @@ int ice_devlink_register_params(struct ice_pf *pf)
> if (status)
> return status;
>
>+ status = devl_params_register(devlink, ice_dvl_msix_params,
>+ ARRAY_SIZE(ice_dvl_msix_params));
>+ if (status)
>+ return status;
>+
> if (hw->func_caps.common_cap.tx_sched_topo_comp_mode_en)
> status = devl_params_register(devlink, ice_dvl_sched_params,
> ARRAY_SIZE(ice_dvl_sched_params));
>+ if (status)
>+ return status;
>
>- return status;
>+ value.vu16 = pf->msix.max;
>+ devl_param_driverinit_value_set(devlink,
>+ DEVLINK_PARAM_GENERIC_ID_MSIX_VEC_PER_PF_MAX,
>+ value);
>+ value.vu16 = pf->msix.min;
>+ devl_param_driverinit_value_set(devlink,
>+ DEVLINK_PARAM_GENERIC_ID_MSIX_VEC_PER_PF_MIN,
>+ value);
>+
>+ return 0;
> }
>
> void ice_devlink_unregister_params(struct ice_pf *pf)
>@@ -1659,6 +1711,8 @@ void ice_devlink_unregister_params(struct ice_pf *pf)
>
> devl_params_unregister(devlink, ice_dvl_rdma_params,
> ARRAY_SIZE(ice_dvl_rdma_params));
>+ devl_params_unregister(devlink, ice_dvl_msix_params,
>+ ARRAY_SIZE(ice_dvl_msix_params));
>
> if (hw->func_caps.common_cap.tx_sched_topo_comp_mode_en)
> devl_params_unregister(devlink, ice_dvl_sched_params,
>diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
>index d6f80da30dec..a67456057c77 100644
>--- a/drivers/net/ethernet/intel/ice/ice.h
>+++ b/drivers/net/ethernet/intel/ice/ice.h
>@@ -95,6 +95,7 @@
> #define ICE_MIN_LAN_TXRX_MSIX 1
> #define ICE_MIN_LAN_OICR_MSIX 1
> #define ICE_MIN_MSIX (ICE_MIN_LAN_TXRX_MSIX + ICE_MIN_LAN_OICR_MSIX)
>+#define ICE_MAX_MSIX 256
> #define ICE_FDIR_MSIX 2
> #define ICE_RDMA_NUM_AEQ_MSIX 4
> #define ICE_MIN_RDMA_MSIX 2
>@@ -545,6 +546,12 @@ struct ice_agg_node {
> u8 valid;
> };
>
>+struct ice_pf_msix {
>+ u16 cur;
>+ u16 min;
>+ u16 max;
>+};
>+
> struct ice_pf {
> struct pci_dev *pdev;
> struct ice_adapter *adapter;
>@@ -615,6 +622,7 @@ struct ice_pf {
> struct msi_map ll_ts_irq; /* LL_TS interrupt MSIX vector */
> u16 max_pf_txqs; /* Total Tx queues PF wide */
> u16 max_pf_rxqs; /* Total Rx queues PF wide */
>+ struct ice_pf_msix msix;
> u16 num_lan_msix; /* Total MSIX vectors for base driver */
> u16 num_lan_tx; /* num LAN Tx queues setup */
> u16 num_lan_rx; /* num LAN Rx queues setup */
>diff --git a/drivers/net/ethernet/intel/ice/ice_irq.c b/drivers/net/ethernet/intel/ice/ice_irq.c
>index ad82ff7d1995..4e559fd6e49f 100644
>--- a/drivers/net/ethernet/intel/ice/ice_irq.c
>+++ b/drivers/net/ethernet/intel/ice/ice_irq.c
>@@ -252,7 +252,19 @@ void ice_clear_interrupt_scheme(struct ice_pf *pf)
> int ice_init_interrupt_scheme(struct ice_pf *pf)
> {
> int total_vectors = pf->hw.func_caps.common_cap.num_msix_vectors;
>- int vectors, max_vectors;
>+ union devlink_param_value value;
>+ int vectors, max_vectors, err;
>+
>+ /* load default PF MSI-X range */
>+ err = devl_param_driverinit_value_get(priv_to_devlink(pf),
>+ DEVLINK_PARAM_GENERIC_ID_MSIX_VEC_PER_PF_MIN,
>+ &value);
If err is not 0, you have a bug in the driver. Perhaps it a about the
time to make this return void and add some WARN_ONs inside the function?
>+ pf->msix.min = err ? ICE_MIN_MSIX : value.vu16;
>+
>+ err = devl_param_driverinit_value_get(priv_to_devlink(pf),
>+ DEVLINK_PARAM_GENERIC_ID_MSIX_VEC_PER_PF_MAX,
>+ &value);
>+ pf->msix.max = err ? total_vectors / 2 : value.vu16;
>
> vectors = ice_ena_msix_range(pf);
>
>--
>2.42.0
>
next prev parent reply other threads:[~2024-08-08 15:34 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-08 7:20 [iwl-next v3 0/8] ice: managing MSI-X in driver Michal Swiatkowski
2024-08-08 7:20 ` [iwl-next v3 1/8] ice: devlink PF MSI-X max and min parameter Michal Swiatkowski
2024-08-08 15:34 ` Jiri Pirko [this message]
2024-08-09 5:13 ` Michal Swiatkowski
2024-08-09 5:18 ` [Intel-wired-lan] " Paul Menzel
2024-08-09 5:30 ` Paul Menzel
2024-08-09 10:52 ` Jiri Pirko
2024-08-09 10:51 ` Jiri Pirko
2024-08-09 11:05 ` Michal Swiatkowski
2024-08-09 11:29 ` Jiri Pirko
2024-08-09 11:39 ` Michal Swiatkowski
2024-08-10 6:33 ` Jiri Pirko
2024-08-08 7:20 ` [iwl-next v3 2/8] ice: remove splitting MSI-X between features Michal Swiatkowski
2024-08-08 7:20 ` [iwl-next v3 3/8] ice: get rid of num_lan_msix field Michal Swiatkowski
2024-08-08 7:20 ` [iwl-next v3 4/8] ice, irdma: move interrupts code to irdma Michal Swiatkowski
2024-08-08 7:20 ` [iwl-next v3 5/8] ice: treat dyn_allowed only as suggestion Michal Swiatkowski
2024-08-08 7:20 ` [iwl-next v3 6/8] ice: enable_rdma devlink param Michal Swiatkowski
2024-08-08 7:20 ` [iwl-next v3 7/8] ice: simplify VF MSI-X managing Michal Swiatkowski
2024-08-08 7:20 ` [iwl-next v3 8/8] ice: init flow director before RDMA Michal Swiatkowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZrTli6UxMkzE31TH@nanopsycho.orion \
--to=jiri@resnulli.us \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jacob.e.keller@intel.com \
--cc=konrad.knitter@intel.com \
--cc=marcin.szycik@intel.com \
--cc=michal.swiatkowski@linux.intel.com \
--cc=netdev@vger.kernel.org \
--cc=nex.sw.ncis.nat.hpm.dev@intel.com \
--cc=pawel.chmielewski@intel.com \
--cc=pio.raczynski@gmail.com \
--cc=przemyslaw.kitszel@intel.com \
--cc=sridhar.samudrala@intel.com \
--cc=wojciech.drewek@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox