public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
To: Jiri Pirko <jiri@resnulli.us>
Cc: intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org,
	pawel.chmielewski@intel.com, sridhar.samudrala@intel.com,
	jacob.e.keller@intel.com, pio.raczynski@gmail.com,
	konrad.knitter@intel.com, marcin.szycik@intel.com,
	wojciech.drewek@intel.com, nex.sw.ncis.nat.hpm.dev@intel.com,
	przemyslaw.kitszel@intel.com
Subject: Re: [iwl-next v3 1/8] ice: devlink PF MSI-X max and min parameter
Date: Fri, 9 Aug 2024 07:13:34 +0200	[thread overview]
Message-ID: <ZrWlfhs6x6hrVhH+@mev-dev.igk.intel.com> (raw)
In-Reply-To: <ZrTli6UxMkzE31TH@nanopsycho.orion>

On Thu, Aug 08, 2024 at 05:34:35PM +0200, Jiri Pirko wrote:
> Thu, Aug 08, 2024 at 09:20:09AM CEST, michal.swiatkowski@linux.intel.com wrote:
> >Use generic devlink PF MSI-X parameter to allow user to change MSI-X
> >range.
> >
> >Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
> >Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
> >---
> > .../net/ethernet/intel/ice/devlink/devlink.c  | 56 ++++++++++++++++++-
> > drivers/net/ethernet/intel/ice/ice.h          |  8 +++
> > drivers/net/ethernet/intel/ice/ice_irq.c      | 14 ++++-
> > 3 files changed, 76 insertions(+), 2 deletions(-)
> >
> >diff --git a/drivers/net/ethernet/intel/ice/devlink/devlink.c b/drivers/net/ethernet/intel/ice/devlink/devlink.c
> >index 29a5f822cb8b..bdc22ea13e0f 100644
> >--- a/drivers/net/ethernet/intel/ice/devlink/devlink.c
> >+++ b/drivers/net/ethernet/intel/ice/devlink/devlink.c
> >@@ -1518,6 +1518,32 @@ static int ice_devlink_local_fwd_validate(struct devlink *devlink, u32 id,
> > 	return 0;
> > }
> > 
> >+static int
> >+ice_devlink_msix_max_pf_validate(struct devlink *devlink, u32 id,
> >+				 union devlink_param_value val,
> >+				 struct netlink_ext_ack *extack)
> >+{
> >+	if (val.vu16 > ICE_MAX_MSIX) {
> >+		NL_SET_ERR_MSG_MOD(extack, "PF max MSI-X is too high");
> 
> No reason to have "PF" in the text. Also, no reason to have "max MSI-X".
> That is the name of the param.
> 

Ok, will change both, thanks.

> 
> 
> >+		return -EINVAL;
> >+	}
> >+
> >+	return 0;
> >+}
> >+
> >+static int
> >+ice_devlink_msix_min_pf_validate(struct devlink *devlink, u32 id,
> >+				 union devlink_param_value val,
> >+				 struct netlink_ext_ack *extack)
> >+{
> >+	if (val.vu16 <= ICE_MIN_MSIX) {
> >+		NL_SET_ERR_MSG_MOD(extack, "PF min MSI-X is too low");
> 
> Same comment as for max goes here.
> 
> 
> >+		return -EINVAL;
> >+	}
> >+
> >+	return 0;
> >+}
> >+
> > enum ice_param_id {
> > 	ICE_DEVLINK_PARAM_ID_BASE = DEVLINK_PARAM_GENERIC_ID_MAX,
> > 	ICE_DEVLINK_PARAM_ID_TX_SCHED_LAYERS,
> >@@ -1535,6 +1561,15 @@ static const struct devlink_param ice_dvl_rdma_params[] = {
> > 			      ice_devlink_enable_iw_validate),
> > };
> > 
> >+static const struct devlink_param ice_dvl_msix_params[] = {
> >+	DEVLINK_PARAM_GENERIC(MSIX_VEC_PER_PF_MAX,
> >+			      BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
> >+			      NULL, NULL, ice_devlink_msix_max_pf_validate),
> >+	DEVLINK_PARAM_GENERIC(MSIX_VEC_PER_PF_MIN,
> >+			      BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
> >+			      NULL, NULL, ice_devlink_msix_min_pf_validate),
> >+};
> >+
> > static const struct devlink_param ice_dvl_sched_params[] = {
> > 	DEVLINK_PARAM_DRIVER(ICE_DEVLINK_PARAM_ID_TX_SCHED_LAYERS,
> > 			     "tx_scheduling_layers",
> >@@ -1637,6 +1672,7 @@ void ice_devlink_unregister(struct ice_pf *pf)
> > int ice_devlink_register_params(struct ice_pf *pf)
> > {
> > 	struct devlink *devlink = priv_to_devlink(pf);
> >+	union devlink_param_value value;
> > 	struct ice_hw *hw = &pf->hw;
> > 	int status;
> > 
> >@@ -1645,11 +1681,27 @@ int ice_devlink_register_params(struct ice_pf *pf)
> > 	if (status)
> > 		return status;
> > 
> >+	status = devl_params_register(devlink, ice_dvl_msix_params,
> >+				      ARRAY_SIZE(ice_dvl_msix_params));
> >+	if (status)
> >+		return status;
> >+
> > 	if (hw->func_caps.common_cap.tx_sched_topo_comp_mode_en)
> > 		status = devl_params_register(devlink, ice_dvl_sched_params,
> > 					      ARRAY_SIZE(ice_dvl_sched_params));
> >+	if (status)
> >+		return status;
> > 
> >-	return status;
> >+	value.vu16 = pf->msix.max;
> >+	devl_param_driverinit_value_set(devlink,
> >+					DEVLINK_PARAM_GENERIC_ID_MSIX_VEC_PER_PF_MAX,
> >+					value);
> >+	value.vu16 = pf->msix.min;
> >+	devl_param_driverinit_value_set(devlink,
> >+					DEVLINK_PARAM_GENERIC_ID_MSIX_VEC_PER_PF_MIN,
> >+					value);
> >+
> >+	return 0;
> > }
> > 
> > void ice_devlink_unregister_params(struct ice_pf *pf)
> >@@ -1659,6 +1711,8 @@ void ice_devlink_unregister_params(struct ice_pf *pf)
> > 
> > 	devl_params_unregister(devlink, ice_dvl_rdma_params,
> > 			       ARRAY_SIZE(ice_dvl_rdma_params));
> >+	devl_params_unregister(devlink, ice_dvl_msix_params,
> >+			       ARRAY_SIZE(ice_dvl_msix_params));
> > 
> > 	if (hw->func_caps.common_cap.tx_sched_topo_comp_mode_en)
> > 		devl_params_unregister(devlink, ice_dvl_sched_params,
> >diff --git a/drivers/net/ethernet/intel/ice/ice.h b/drivers/net/ethernet/intel/ice/ice.h
> >index d6f80da30dec..a67456057c77 100644
> >--- a/drivers/net/ethernet/intel/ice/ice.h
> >+++ b/drivers/net/ethernet/intel/ice/ice.h
> >@@ -95,6 +95,7 @@
> > #define ICE_MIN_LAN_TXRX_MSIX	1
> > #define ICE_MIN_LAN_OICR_MSIX	1
> > #define ICE_MIN_MSIX		(ICE_MIN_LAN_TXRX_MSIX + ICE_MIN_LAN_OICR_MSIX)
> >+#define ICE_MAX_MSIX		256
> > #define ICE_FDIR_MSIX		2
> > #define ICE_RDMA_NUM_AEQ_MSIX	4
> > #define ICE_MIN_RDMA_MSIX	2
> >@@ -545,6 +546,12 @@ struct ice_agg_node {
> > 	u8 valid;
> > };
> > 
> >+struct ice_pf_msix {
> >+	u16 cur;
> >+	u16 min;
> >+	u16 max;
> >+};
> >+
> > struct ice_pf {
> > 	struct pci_dev *pdev;
> > 	struct ice_adapter *adapter;
> >@@ -615,6 +622,7 @@ struct ice_pf {
> > 	struct msi_map ll_ts_irq;	/* LL_TS interrupt MSIX vector */
> > 	u16 max_pf_txqs;	/* Total Tx queues PF wide */
> > 	u16 max_pf_rxqs;	/* Total Rx queues PF wide */
> >+	struct ice_pf_msix msix;
> > 	u16 num_lan_msix;	/* Total MSIX vectors for base driver */
> > 	u16 num_lan_tx;		/* num LAN Tx queues setup */
> > 	u16 num_lan_rx;		/* num LAN Rx queues setup */
> >diff --git a/drivers/net/ethernet/intel/ice/ice_irq.c b/drivers/net/ethernet/intel/ice/ice_irq.c
> >index ad82ff7d1995..4e559fd6e49f 100644
> >--- a/drivers/net/ethernet/intel/ice/ice_irq.c
> >+++ b/drivers/net/ethernet/intel/ice/ice_irq.c
> >@@ -252,7 +252,19 @@ void ice_clear_interrupt_scheme(struct ice_pf *pf)
> > int ice_init_interrupt_scheme(struct ice_pf *pf)
> > {
> > 	int total_vectors = pf->hw.func_caps.common_cap.num_msix_vectors;
> >-	int vectors, max_vectors;
> >+	union devlink_param_value value;
> >+	int vectors, max_vectors, err;
> >+
> >+	/* load default PF MSI-X range */
> >+	err = devl_param_driverinit_value_get(priv_to_devlink(pf),
> >+					      DEVLINK_PARAM_GENERIC_ID_MSIX_VEC_PER_PF_MIN,
> >+					      &value);
> 
> If err is not 0, you have a bug in the driver. Perhaps it a about the
> time to make this return void and add some WARN_ONs inside the function?
> 

err is not 0 when this param isn't found (not registered yet). It is a
case when driver is probing, I want to have here default values and
register it later. Instead of checking if it is probe context or reload
context I am checking if param already exists. The param doesn't exist in
probe, but exists in reload.

> 
> >+	pf->msix.min = err ? ICE_MIN_MSIX : value.vu16;
> >+
> >+	err = devl_param_driverinit_value_get(priv_to_devlink(pf),
> >+					      DEVLINK_PARAM_GENERIC_ID_MSIX_VEC_PER_PF_MAX,
> >+					      &value);
> >+	pf->msix.max = err ? total_vectors / 2 : value.vu16;
> > 
> > 	vectors = ice_ena_msix_range(pf);
> > 
> >-- 
> >2.42.0
> >

  reply	other threads:[~2024-08-09  5:15 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-08  7:20 [iwl-next v3 0/8] ice: managing MSI-X in driver Michal Swiatkowski
2024-08-08  7:20 ` [iwl-next v3 1/8] ice: devlink PF MSI-X max and min parameter Michal Swiatkowski
2024-08-08 15:34   ` Jiri Pirko
2024-08-09  5:13     ` Michal Swiatkowski [this message]
2024-08-09  5:18       ` [Intel-wired-lan] " Paul Menzel
2024-08-09  5:30         ` Paul Menzel
2024-08-09 10:52         ` Jiri Pirko
2024-08-09 10:51       ` Jiri Pirko
2024-08-09 11:05         ` Michal Swiatkowski
2024-08-09 11:29           ` Jiri Pirko
2024-08-09 11:39             ` Michal Swiatkowski
2024-08-10  6:33               ` Jiri Pirko
2024-08-08  7:20 ` [iwl-next v3 2/8] ice: remove splitting MSI-X between features Michal Swiatkowski
2024-08-08  7:20 ` [iwl-next v3 3/8] ice: get rid of num_lan_msix field Michal Swiatkowski
2024-08-08  7:20 ` [iwl-next v3 4/8] ice, irdma: move interrupts code to irdma Michal Swiatkowski
2024-08-08  7:20 ` [iwl-next v3 5/8] ice: treat dyn_allowed only as suggestion Michal Swiatkowski
2024-08-08  7:20 ` [iwl-next v3 6/8] ice: enable_rdma devlink param Michal Swiatkowski
2024-08-08  7:20 ` [iwl-next v3 7/8] ice: simplify VF MSI-X managing Michal Swiatkowski
2024-08-08  7:20 ` [iwl-next v3 8/8] ice: init flow director before RDMA Michal Swiatkowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZrWlfhs6x6hrVhH+@mev-dev.igk.intel.com \
    --to=michal.swiatkowski@linux.intel.com \
    --cc=intel-wired-lan@lists.osuosl.org \
    --cc=jacob.e.keller@intel.com \
    --cc=jiri@resnulli.us \
    --cc=konrad.knitter@intel.com \
    --cc=marcin.szycik@intel.com \
    --cc=netdev@vger.kernel.org \
    --cc=nex.sw.ncis.nat.hpm.dev@intel.com \
    --cc=pawel.chmielewski@intel.com \
    --cc=pio.raczynski@gmail.com \
    --cc=przemyslaw.kitszel@intel.com \
    --cc=sridhar.samudrala@intel.com \
    --cc=wojciech.drewek@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox