Re: [PATCH v2 1/2] dt-bindings: net: dp83826: support TX data voltage tuning

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 07/02/2024 18:58, Catalin Popescu wrote:
> Add properties ti,cfg-dac-minus-one-milli-percent and
> ti,cfg-dac-plus-one-milli-percent to support voltage tuning
> of logical levels -1/+1 of the MLT-3 encoded TX data.
> 
> Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com>
> ---
> Changes in v2:
>  - squash the 2 DT bindings patches in one single patch
>  - drop redundant "binding" from the DT bindings patch title
>  - rename DT properties and define them as percentage
>  - add default value for each new DT property
> ---
>  .../devicetree/bindings/net/ti,dp83822.yaml    | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/ti,dp83822.yaml b/Documentation/devicetree/bindings/net/ti,dp83822.yaml
> index db74474207ed..6bbd465e51d6 100644
> --- a/Documentation/devicetree/bindings/net/ti,dp83822.yaml
> +++ b/Documentation/devicetree/bindings/net/ti,dp83822.yaml
> @@ -62,6 +62,24 @@ properties:
>         for the PHY.  The internal delay for the PHY is fixed to 3.5ns relative
>         to transmit data.
>  
> +  ti,cfg-dac-minus-one-milli-percent:
> +    description: |
> +       DP83826 PHY only.
> +       Sets the voltage ratio (with respect to the nominal value)
> +       of the logical level -1 for the MLT-3 encoded TX data.
> +    enum: [50000, 56250, 62500, 68750, 75000, 81250, 87500, 93750, 100000,
> +           106250, 112500, 118750, 125000, 131250, 137500, 143750, 150000]

I see all values being multiple of basis points, so why not using -bp
suffix?


Best regards,
Krzysztof