Re: [PATCH net-next v4 4/4] net: stmmac: dwmac-socfpga: Add support for Agilex5 TSN GMAC with FPGA converter

["Nazle Asmade, Muhammad Nazim Amirul" <muhammad.nazim.amirul.nazle.asmade@altera.com>]

On 16/7/2026 3:56 pm, Krzysztof Kozlowski wrote:
> On Wed, Jul 15, 2026 at 07:19:32PM -0700, muhammad.nazim.amirul.nazle.asmade@altera.com wrote:
>> From: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
>>
>> The Agilex5 SoCDK TSN Config2 board uses a GMII-to-RGMII converter
>> implemented as FPGA soft IP between gmac1 and its PHY. This converter
>> provides the RGMII TX/RX clock delays, so the MAC interface selector
>> must be configured for GMII while the PHY is configured without delays.
>>
>> Add the "altr,socfpga-stmmac-agilex5-tsn" compatible to the match table
>> and detect it in probe to force GMII for the MAC interface selector and
>> strip the delay bits from phy_interface so the PHY is not configured to
>> add delays already provided by the FPGA converter.
>>
>> Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
>> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
>> ---
>> v4: Add Reviewed-by from Andrew Lunn.
>>
>>   drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 13 ++++++++++++-
>>   1 file changed, 12 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
>> index 1d7f0a57d288..bf591a68502f 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
>> @@ -69,12 +69,13 @@ struct socfpga_dwmac {
>>   	void __iomem *tse_pcs_base;
>>   	void __iomem *sgmii_adapter_base;
>>   	bool f2h_ptp_ref_clk;
>> +	phy_interface_t mac_interface;
>>   	const struct socfpga_dwmac_ops *ops;
>>   };
>>   
>>   static phy_interface_t socfpga_get_plat_phymode(struct socfpga_dwmac *dwmac)
>>   {
>> -	return dwmac->plat_dat->phy_interface;
>> +	return dwmac->mac_interface;
>>   }
>>   
>>   static void socfpga_sgmii_config(struct socfpga_dwmac *dwmac, bool enable)
>> @@ -650,6 +651,15 @@ static int socfpga_dwmac_probe(struct platform_device *pdev)
>>   	plat_dat->pcs_exit = socfpga_dwmac_pcs_exit;
>>   	plat_dat->select_pcs = socfpga_dwmac_select_pcs;
>>   
>> +	dwmac->mac_interface = plat_dat->phy_interface;
>> +
>> +	if (of_device_is_compatible(pdev->dev.of_node,
>> +				    "altr,socfpga-stmmac-agilex5-tsn")) {
> 
> Don't add compatibles around the code. Does not scale. You have driver
> match data exactly for that purpose.
> 
>> +		dwmac->mac_interface = PHY_INTERFACE_MODE_GMII;
>> +		if (phy_interface_mode_is_rgmii(plat_dat->phy_interface))
>> +			plat_dat->phy_interface = PHY_INTERFACE_MODE_RGMII;
>> +	}
>> +
>>   	ops->setup_plat_dat(dwmac);
>>   
>>   	return devm_stmmac_pltfr_probe(pdev, plat_dat, &stmmac_res);
>> @@ -674,6 +684,7 @@ static const struct of_device_id socfpga_dwmac_match[] = {
>>   	{ .compatible = "altr,socfpga-stmmac", .data = &socfpga_gen5_ops },
>>   	{ .compatible = "altr,socfpga-stmmac-a10-s10", .data = &socfpga_gen10_ops },
>>   	{ .compatible = "altr,socfpga-stmmac-agilex5", .data = &socfpga_agilex5_ops },
>> +	{ .compatible = "altr,socfpga-stmmac-agilex5-tsn", .data = &socfpga_agilex5_ops },
> 
> Otherwise dvices are compatible? They why would you need this entry in
> the first place?
Hi Krzysztof,

Just to confirm: should we add a separate socfpga_agilex5_tsn_ops and 
use that as .data for the TSN compatible, instead of checking the 
compatible string in probe and reusing socfpga_agilex5_ops?

Best regards,
Nazim
> 
> Best regards,
> Krzysztof
>