Netdev List
 help / color / mirror / Atom feed
From: "Ed Swierk" <eswierk@arastra.com>
To: "Ayaz Abdulla" <aabdulla@nvidia.com>, netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Subject: [updated PATCH] forcedeth: power down phy when interface is down
Date: Fri, 21 Sep 2007 11:12:52 -0700	[thread overview]
Message-ID: <e6c711510709211112v3123e792g6b2ba1f3057afbd0@mail.gmail.com> (raw)
In-Reply-To: <46F1D83B.5070100@nvidia.com>

[-- Attachment #1: Type: text/plain, Size: 408 bytes --]

On 9/19/07, Ayaz Abdulla <aabdulla@nvidia.com> wrote:
> It seems that you are powering down the phy even if WOL is enabled.

Right; I've updated the patch to skip powering down the phy when wol is enabled.

> Secondly, can you powerdown the phy at the same time you start
> performing autoneg restart?

This seems to work fine with a BCM5461S phy; it would be worth testing
with other phys to be sure.

--Ed

[-- Attachment #2: forcedeth-phy-power-down.patch --]
[-- Type: application/octet-stream, Size: 2264 bytes --]

Bring the physical link down when the interface is down by placing the PHY
in power-down state, unless WOL is enabled.  This mirrors the behavior of
other drivers including e1000 and tg3.

Signed-off-by: Ed Swierk <eswierk@arastra.com>

Index: linux-2.6.22.1/drivers/net/forcedeth.c
===================================================================
--- linux-2.6.22.1.orig/drivers/net/forcedeth.c
+++ linux-2.6.22.1/drivers/net/forcedeth.c
@@ -112,6 +112,7 @@
  *	0.58: 30 Oct 2006: Added support for sideband management unit.
  *	0.59: 30 Oct 2006: Added support for recoverable error.
  *	0.60: 20 Jan 2007: Code optimizations for rings, rx & tx data paths, and stats.
+ *	0.61: 21 Sep 2007: Power down phy when interface down and wol disabled.
  *
  * Known bugs:
  * We suspect that on some hardware no TX done interrupts are generated.
@@ -128,7 +129,7 @@
 #else
 #define DRIVERNAPI
 #endif
-#define FORCEDETH_VERSION		"0.60"
+#define FORCEDETH_VERSION		"0.61"
 #define DRV_NAME			"forcedeth"
 
 #include <linux/module.h>
@@ -1170,9 +1171,9 @@ static int phy_init(struct net_device *d
 	/* some phys clear out pause advertisment on reset, set it back */
 	mii_rw(dev, np->phyaddr, MII_ADVERTISE, reg);
 
-	/* restart auto negotiation */
+	/* restart auto negotiation, power down phy */
 	mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
-	mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE);
+	mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE | BMCR_PDOWN);
 	if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control)) {
 		return PHY_ERROR;
 	}
@@ -4694,6 +4695,10 @@ static int nv_open(struct net_device *de
 
 	dprintk(KERN_DEBUG "nv_open: begin\n");
 
+	/* power up phy */
+	mii_rw(dev, np->phyaddr, MII_BMCR,
+	       mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ) & ~BMCR_PDOWN);
+
 	/* erase previous misconfiguration */
 	if (np->driver_data & DEV_HAS_POWER_CNTRL)
 		nv_mac_reset(dev);
@@ -4872,6 +4877,10 @@ static int nv_close(struct net_device *d
 	if (np->wolenabled) {
 		writel(NVREG_PFF_ALWAYS|NVREG_PFF_MYADDR, base + NvRegPacketFilterFlags);
 		nv_start_rx(dev);
+	} else {
+		/* power down phy */
+		mii_rw(dev, np->phyaddr, MII_BMCR,
+		       mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ) | BMCR_PDOWN);
 	}
 
 	/* FIXME: power down nic */

      reply	other threads:[~2007-09-21 18:12 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-09-18 16:58 [PATCH] forcedeth: power down phy when interface is down Ed Swierk
2007-09-20  2:17 ` Ayaz Abdulla
2007-09-21 18:12   ` Ed Swierk [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e6c711510709211112v3123e792g6b2ba1f3057afbd0@mail.gmail.com \
    --to=eswierk@arastra.com \
    --cc=aabdulla@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox