Re: [PATCH net-next] net: phy: marvell: add LED support for 88E1116R PHY

[Aleksander Jan Bajkowski <olek2@wp.pl>]

Hi Andrew,

On 09/10/2026 14:15, Andrew Lunn wrote:
> On Fri, Oct 09, 2026 at 09:08:29AM +0300, Konstantin Meshkov wrote:
>> The Marvell 88E1116R PHY (used on the D-Link DNS-325) exposes its LEDs
>> through the same page 3 register 0x10 LED control layout as the 88E1318S.
>> Wire up the existing 88E1318S LED handlers in the 88E1116R driver entry
>> so the PHY LEDs can be described in the device tree and driven through
>> the LED trigger API with hardware offload.
>>
>> The LED polarity is configured through the led_polarity_set() callback
>> shared with the 88E1318S family.
>>
>> Signed-off-by: Konstantin Meshkov <skyline@mail.ru>
>> ---
>> This patch depends on:
>> [PATCH net-next v2] net: phy: marvell: add support for PHY LEDs polarity modes
> I've not be tracking. Is this merged already? If not, please resubmit
> once it has been.

I was expecting that Konstantin will send a patch that only adds support
for LED triggers. This patch should be simple and I expect it to be quickly
merged. Then I'm planning to include LED polarity settings for the 88e1116r
in the next iteration of my patch.

Best regards,
Aleksander