* Re: 2.6.16-rc1-mm4: ACX=y, ACX_USB=n compile error
From: Gabriel C. @ 2006-01-31 18:34 UTC (permalink / raw)
To: Denis Vlasenko; +Cc: linux-kernel, John W. Linville, Adrian Bunk, netdev
In-Reply-To: <200601311658.09423.vda@ilport.com.ua>
On Tue, 31 Jan 2006 16:58:09 +0200
Denis Vlasenko <vda@ilport.com.ua> wrote:
> On Tuesday 31 January 2006 16:54, John W. Linville wrote:
> > On Tue, Jan 31, 2006 at 02:16:05PM +0200, Denis Vlasenko wrote:
> >
> > > CONFIG_ACX=y
> > > # CONFIG_ACX_PCI is not set
> > > # CONFIG_ACX_USB is not set
> > >
> > > This won't fly. You must select at least one.
> > >
> > > Attached patch will check for this and #error out.
> > > Andrew, do not apply to -mm, I'll send you bigger update today.
> >
> > Is there any way to move this into a Kconfig file? That seems nicer
> > than having #ifdefs in source code to check for a configuration
> > error.
>
> Can't think of any at the moment.
> --
> vda
>
I'm not a kernel hacker :-) and mabye I'm wrong but why not auto select
ACX_{PCI,USB} ?
Gabriel
^ permalink raw reply
* Re: [PATCH] RealTek RTL-8169 Full Duplex Patch
From: Francois Romieu @ 2006-01-31 18:19 UTC (permalink / raw)
To: Andy Gospodarek; +Cc: jgarzik, netdev, linux-kernel
In-Reply-To: <20060130161029.GA11938@gospo.rdu.redhat.com>
Andy Gospodarek <andy@greyhouse.net> :
> Allow the r8129 driver to set devices to be full-duplex only when
> auto-negotiate is disabled.
s/8129/8169 and added to the branch 'for-jeff' at
git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6.git
--
Ueimor
^ permalink raw reply
* Re: [2.6 patch] PCMCIA=m, HOSTAP_CS=y is not a legal configuration
From: John W. Linville @ 2006-01-31 16:19 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Gabriel C., linux-kernel, da.crew, netdev
In-Reply-To: <20060130182317.GD3655@stusta.de>
On Mon, Jan 30, 2006 at 07:23:17PM +0100, Adrian Bunk wrote:
> CONFIG_PCMCIA=m, CONFIG_HOSTAP_CS=y doesn't compile.
>
> Reported by "Gabriel C." <crazy@pimpmylinux.org>.
Applied to upstream-fixes branch of wireless-2.6.
Thanks,
John
--
John W. Linville
linville@tuxdriver.com
^ permalink raw reply
* [2.6 patch] wrong firmware location in IPW2100 Kconfig entry
From: Adrian Bunk @ 2006-01-31 16:11 UTC (permalink / raw)
To: linville; +Cc: netdev, Jesper Juhl, linux-kernel, yi.zhu, jketreno
From: Jesper Juhl <jesper.juhl@gmail.com>
Firmware should go into /lib/firmware, not /etc/firmware.
Found by Alejandro Bonilla.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
This patch was sent by Jesper Juhl on:
- 6 Sep 2005
--- linux-2.6.13-mm1-orig/drivers/net/wireless/Kconfig 2005-09-02 23:59:51.000000000 +0200
+++ linux-2.6.13-mm1/drivers/net/wireless/Kconfig 2005-09-06 20:39:45.000000000 +0200
@@ -152,7 +152,7 @@
In order to use this driver, you will need a firmware image for it.
You can obtain the firmware from
<http://ipw2100.sf.net/>. Once you have the firmware image, you
- will need to place it in /etc/firmware.
+ will need to place it in /lib/firmware.
You will also very likely need the Wireless Tools in order to
configure your card:
^ permalink raw reply
* Re: 2.6.16-rc1-mm4: ACX=y, ACX_USB=n compile error
From: Denis Vlasenko @ 2006-01-31 14:58 UTC (permalink / raw)
To: John W. Linville; +Cc: Gabriel C., da.crew, linux-kernel, Adrian Bunk, netdev
In-Reply-To: <20060131145431.GI5433@tuxdriver.com>
On Tuesday 31 January 2006 16:54, John W. Linville wrote:
> On Tue, Jan 31, 2006 at 02:16:05PM +0200, Denis Vlasenko wrote:
>
> > CONFIG_ACX=y
> > # CONFIG_ACX_PCI is not set
> > # CONFIG_ACX_USB is not set
> >
> > This won't fly. You must select at least one.
> >
> > Attached patch will check for this and #error out.
> > Andrew, do not apply to -mm, I'll send you bigger update today.
>
> Is there any way to move this into a Kconfig file? That seems nicer
> than having #ifdefs in source code to check for a configuration error.
Can't think of any at the moment.
--
vda
^ permalink raw reply
* Re: 2.6.16-rc1-mm4: ACX=y, ACX_USB=n compile error
From: John W. Linville @ 2006-01-31 14:54 UTC (permalink / raw)
To: Denis Vlasenko; +Cc: Gabriel C., da.crew, linux-kernel, Adrian Bunk, netdev
In-Reply-To: <200601311416.05397.vda@ilport.com.ua>
On Tue, Jan 31, 2006 at 02:16:05PM +0200, Denis Vlasenko wrote:
> CONFIG_ACX=y
> # CONFIG_ACX_PCI is not set
> # CONFIG_ACX_USB is not set
>
> This won't fly. You must select at least one.
>
> Attached patch will check for this and #error out.
> Andrew, do not apply to -mm, I'll send you bigger update today.
Is there any way to move this into a Kconfig file? That seems nicer
than having #ifdefs in source code to check for a configuration error.
John
P.S. Please post any patches with formatting according to kernel
conventions:
http://linux.yyz.us/patch-format.html
--
John W. Linville
linville@tuxdriver.com
^ permalink raw reply
* Re: ip_conntrack related slab error (Re: Fw: Re: 2.6.16-rc1-mm3)
From: Patrick McHardy @ 2006-01-31 12:50 UTC (permalink / raw)
To: Reuben Farrelly
Cc: Harald Welte, Andrew Morton, Linux Kernel Mailinglist,
Linux Netdev List
In-Reply-To: <43DF36FD.70305@reub.net>
Reuben Farrelly wrote:
> tornado.reub.net login: BUG: unable to handle kernel paging request at
> virtual address 00200200
This means ct->nat.info.bysource was already removed from the list,
which can only happen if the conntrack entry is destroyed twice.
I can't find how this could have happened, please enable
CONFIG_NETFILTER_DEBUG, the DPRINTK defines in
ip_conntrack_{standalone,core,netlink}.c and ip_nat_{core,standalone}.c
and logging of invalid packets ("echo 255 >
/proc/sys/net/ipv4/netfilter/ip_conntrack_log_invalid"). I hope this
will give some clues ..
^ permalink raw reply
* [2.6 patch] AIRO{,_CS} <-> CRYPTO fixes
From: Adrian Bunk @ 2006-01-31 12:41 UTC (permalink / raw)
To: Andrew Morton; +Cc: linville, netdev, linux-kernel
CRYPTO is a helper variable, and to make it easier for users, it should
therefore select'ed and not be listed in the dependencies.
drivers/net/wireless/airo.c requires CONFIG_CRYPTO for compilations.
Therefore, AIRO_CS also has to CRYPTO.
Additionally, this patch removes the #ifdef's for the non-compiling
CRYPTO=n case from drivers/net/wireless/airo.c.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
This patch was already sent on:
- 21 Jan 2006
drivers/net/wireless/Kconfig | 4 +-
drivers/net/wireless/airo.c | 56 +----------------------------------
2 files changed, 5 insertions(+), 55 deletions(-)
--- linux-2.6.15-mm2-full/drivers/net/wireless/Kconfig.old 2006-01-10 20:40:12.000000000 +0100
+++ linux-2.6.15-mm2-full/drivers/net/wireless/Kconfig 2006-01-10 21:06:08.000000000 +0100
@@ -244,6 +244,7 @@
config AIRO
tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
- depends on NET_RADIO && ISA_DMA_API && CRYPTO && (PCI || BROKEN)
+ depends on NET_RADIO && ISA_DMA_API && (PCI || BROKEN)
+ select CRYPTO
---help---
This is the standard Linux driver to support Cisco/Aironet ISA and
PCI 802.11 wireless cards.
@@ -391,6 +392,7 @@
config AIRO_CS
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
depends on NET_RADIO && PCMCIA && (BROKEN || !M32R)
+ select CRYPTO
---help---
This is the standard Linux driver to support Cisco/Aironet PCMCIA
802.11 wireless cards. This driver is the same as the Aironet
--- linux-2.6.15-mm2-full/drivers/net/wireless/airo.c.old 2006-01-10 20:40:31.000000000 +0100
+++ linux-2.6.15-mm2-full/drivers/net/wireless/airo.c 2006-01-10 20:42:44.000000000 +0100
@@ -36,6 +36,7 @@
#include <linux/in.h>
#include <linux/bitops.h>
#include <linux/scatterlist.h>
+#include <linux/crypto.h>
#include <asm/io.h>
#include <asm/system.h>
@@ -87,14 +88,6 @@
#include <linux/delay.h>
#endif
-/* Support Cisco MIC feature */
-#define MICSUPPORT
-
-#if defined(MICSUPPORT) && !defined(CONFIG_CRYPTO)
-#warning MIC support requires Crypto API
-#undef MICSUPPORT
-#endif
-
/* Hack to do some power saving */
#define POWER_ON_DOWN
@@ -1118,7 +1111,6 @@
static int writerids(struct net_device *dev, aironet_ioctl *comp);
static int flashcard(struct net_device *dev, aironet_ioctl *comp);
#endif /* CISCO_EXT */
-#ifdef MICSUPPORT
static void micinit(struct airo_info *ai);
static int micsetup(struct airo_info *ai);
static int encapsulate(struct airo_info *ai, etherHead *pPacket, MICBuffer *buffer, int len);
@@ -1127,9 +1119,6 @@
static u8 airo_rssi_to_dbm (tdsRssiEntry *rssi_rid, u8 rssi);
static u8 airo_dbm_to_pct (tdsRssiEntry *rssi_rid, u8 dbm);
-#include <linux/crypto.h>
-#endif
-
struct airo_info {
struct net_device_stats stats;
struct net_device *dev;
@@ -1190,12 +1179,10 @@
unsigned long scan_timestamp; /* Time started to scan */
struct iw_spy_data spy_data;
struct iw_public_data wireless_data;
-#ifdef MICSUPPORT
/* MIC stuff */
struct crypto_tfm *tfm;
mic_module mod[2];
mic_statistics micstats;
-#endif
HostRxDesc rxfids[MPI_MAX_FIDS]; // rx/tx/config MPI350 descriptors
HostTxDesc txfids[MPI_MAX_FIDS];
HostRidDesc config_desc;
@@ -1229,7 +1216,6 @@
static int flashputbuf(struct airo_info *ai);
static int flashrestart(struct airo_info *ai,struct net_device *dev);
-#ifdef MICSUPPORT
/***********************************************************************
* MIC ROUTINES *
***********************************************************************
@@ -1686,7 +1672,6 @@
digest[2] = (val>>8) & 0xFF;
digest[3] = val & 0xFF;
}
-#endif
static int readBSSListRid(struct airo_info *ai, int first,
BSSListRid *list) {
@@ -2005,7 +1990,6 @@
* Firmware automaticly puts 802 header on so
* we don't need to account for it in the length
*/
-#ifdef MICSUPPORT
if (test_bit(FLAG_MIC_CAPABLE, &ai->flags) && ai->micstats.enabled &&
(ntohs(((u16 *)buffer)[6]) != 0x888E)) {
MICBuffer pMic;
@@ -2022,9 +2006,7 @@
memcpy (sendbuf, &pMic, sizeof(pMic));
sendbuf += sizeof(pMic);
memcpy (sendbuf, buffer, len - sizeof(etherHead));
- } else
-#endif
- {
+ } else {
*payloadLen = cpu_to_le16(len - sizeof(etherHead));
dev->trans_start = jiffies;
@@ -2400,9 +2382,7 @@
ai->shared, ai->shared_dma);
}
}
-#ifdef MICSUPPORT
crypto_free_tfm(ai->tfm);
-#endif
del_airo_dev( dev );
free_netdev( dev );
}
@@ -2726,9 +2706,7 @@
ai->thr_pid = kernel_thread(airo_thread, dev, CLONE_FS | CLONE_FILES);
if (ai->thr_pid < 0)
goto err_out_free;
-#ifdef MICSUPPORT
ai->tfm = NULL;
-#endif
rc = add_airo_dev( dev );
if (rc)
goto err_out_thr;
@@ -2969,10 +2947,8 @@
airo_read_wireless_stats(ai);
else if (test_bit(JOB_PROMISC, &ai->flags))
airo_set_promisc(ai);
-#ifdef MICSUPPORT
else if (test_bit(JOB_MIC, &ai->flags))
micinit(ai);
-#endif
else if (test_bit(JOB_EVENT, &ai->flags))
airo_send_event(dev);
else if (test_bit(JOB_AUTOWEP, &ai->flags))
@@ -3010,12 +2986,10 @@
if ( status & EV_MIC ) {
OUT4500( apriv, EVACK, EV_MIC );
-#ifdef MICSUPPORT
if (test_bit(FLAG_MIC_CAPABLE, &apriv->flags)) {
set_bit(JOB_MIC, &apriv->flags);
wake_up_interruptible(&apriv->thr_wait);
}
-#endif
}
if ( status & EV_LINK ) {
union iwreq_data wrqu;
@@ -3194,11 +3168,8 @@
}
bap_read (apriv, buffer + hdrlen/2, len, BAP0);
} else {
-#ifdef MICSUPPORT
MICBuffer micbuf;
-#endif
bap_read (apriv, buffer, ETH_ALEN*2, BAP0);
-#ifdef MICSUPPORT
if (apriv->micstats.enabled) {
bap_read (apriv,(u16*)&micbuf,sizeof(micbuf),BAP0);
if (ntohs(micbuf.typelen) > 0x05DC)
@@ -3211,15 +3182,10 @@
skb_trim (skb, len + hdrlen);
}
}
-#endif
bap_read(apriv,buffer+ETH_ALEN,len,BAP0);
-#ifdef MICSUPPORT
if (decapsulate(apriv,&micbuf,(etherHead*)buffer,len)) {
badmic:
dev_kfree_skb_irq (skb);
-#else
- if (0) {
-#endif
badrx:
OUT4500( apriv, EVACK, EV_RX);
goto exitrx;
@@ -3430,10 +3396,8 @@
int len = 0;
struct sk_buff *skb;
char *buffer;
-#ifdef MICSUPPORT
int off = 0;
MICBuffer micbuf;
-#endif
memcpy_fromio(&rxd, ai->rxfids[0].card_ram_off, sizeof(rxd));
/* Make sure we got something */
@@ -3448,7 +3412,6 @@
goto badrx;
}
buffer = skb_put(skb,len);
-#ifdef MICSUPPORT
memcpy(buffer, ai->rxfids[0].virtual_host_addr, ETH_ALEN * 2);
if (ai->micstats.enabled) {
memcpy(&micbuf,
@@ -3470,9 +3433,6 @@
dev_kfree_skb_irq (skb);
goto badrx;
}
-#else
- memcpy(buffer, ai->rxfids[0].virtual_host_addr, len);
-#endif
#ifdef WIRELESS_SPY
if (ai->spy_data.spy_number > 0) {
char *sa;
@@ -3689,13 +3649,11 @@
ai->config.authType = AUTH_OPEN;
ai->config.modulation = MOD_CCK;
-#ifdef MICSUPPORT
if ((cap_rid.len>=sizeof(cap_rid)) && (cap_rid.extSoftCap&1) &&
(micsetup(ai) == SUCCESS)) {
ai->config.opmode |= MODE_MIC;
set_bit(FLAG_MIC_CAPABLE, &ai->flags);
}
-#endif
/* Save off the MAC */
for( i = 0; i < ETH_ALEN; i++ ) {
@@ -4170,15 +4128,12 @@
}
len -= ETH_ALEN * 2;
-#ifdef MICSUPPORT
if (test_bit(FLAG_MIC_CAPABLE, &ai->flags) && ai->micstats.enabled &&
(ntohs(((u16 *)pPacket)[6]) != 0x888E)) {
if (encapsulate(ai,(etherHead *)pPacket,&pMic,len) != SUCCESS)
return ERROR;
miclen = sizeof(pMic);
}
-#endif
-
// packet is destination[6], source[6], payload[len-12]
// write the payload length and dst/src/payload
if (bap_setup(ai, txFid, 0x0036, BAP1) != SUCCESS) return ERROR;
@@ -7271,13 +7226,11 @@
case AIROGSTAT: ridcode = RID_STATUS; break;
case AIROGSTATSD32: ridcode = RID_STATSDELTA; break;
case AIROGSTATSC32: ridcode = RID_STATS; break;
-#ifdef MICSUPPORT
case AIROGMICSTATS:
if (copy_to_user(comp->data, &ai->micstats,
min((int)comp->len,(int)sizeof(ai->micstats))))
return -EFAULT;
return 0;
-#endif
case AIRORRID: ridcode = comp->ridnum; break;
default:
return -EINVAL;
@@ -7309,9 +7262,7 @@
static int writerids(struct net_device *dev, aironet_ioctl *comp) {
struct airo_info *ai = dev->priv;
int ridcode;
-#ifdef MICSUPPORT
int enabled;
-#endif
Resp rsp;
static int (* writer)(struct airo_info *, u16 rid, const void *, int, int);
unsigned char *iobuf;
@@ -7368,11 +7319,9 @@
PC4500_readrid(ai,RID_STATSDELTACLEAR,iobuf,RIDSIZE, 1);
-#ifdef MICSUPPORT
enabled = ai->micstats.enabled;
memset(&ai->micstats,0,sizeof(ai->micstats));
ai->micstats.enabled = enabled;
-#endif
if (copy_to_user(comp->data, iobuf,
min((int)comp->len, (int)RIDSIZE))) {
^ permalink raw reply
* Re: 2.6.16-rc1-mm4: ACX=y, ACX_USB=n compile error
From: Denis Vlasenko @ 2006-01-31 12:16 UTC (permalink / raw)
To: Gabriel C.; +Cc: da.crew, linux-kernel, Adrian Bunk, linville, netdev
In-Reply-To: <20060131100330.2931cbe9@zwerg>
[-- Attachment #1: Type: text/plain, Size: 1078 bytes --]
On Tuesday 31 January 2006 11:03, Gabriel C. wrote:
> > > > I got this compile error with 2.6.16-rc1-mm4 , config attached.
> > > >
> > > >
> > > > LD .tmp_vmlinux1
> > > > drivers/built-in.o: In function
> > > > `acx_l_transmit_authen1':common.c:(.text+0x6cd62): undefined
> > > > reference to `acxusb_l_alloc_tx' :common.c:(.text+0x6cd74):
> > > > undefined reference to
> > > > `acxusb_l_get_txbuf' :common.c:(.text+0x6cdeb): undefined
> > > > reference to `acxusb_l_tx_data' drivers/built-in.o: In function
> > > > `acx_s_configure_debug': undefined reference to
> > > > `acxusb_s_issue_cmd_timeo_debug' drivers/built-in.o: In function
> > > > [many more]
> > > >...
> > >
> > > Thanks for your report.
> > >
> > > @Denis:
> > > The problem seems to be CONFIG_ACX=y, CONFIG_ACX_USB=n.
> >
> > Thanks, will test/fix ASAP.
CONFIG_ACX=y
# CONFIG_ACX_PCI is not set
# CONFIG_ACX_USB is not set
This won't fly. You must select at least one.
Attached patch will check for this and #error out.
Andrew, do not apply to -mm, I'll send you bigger update today.
--
vda
[-- Attachment #2: acx.patch --]
[-- Type: text/x-diff, Size: 660 bytes --]
diff -urpN linux-2.6.16-rc1-mm4.org/drivers/net/wireless/tiacx.org/acx_struct.h linux-2.6.16-rc1-mm4.org/drivers/net/wireless/tiacx/acx_struct.h
--- linux-2.6.16-rc1-mm4.org/drivers/net/wireless/tiacx.org/acx_struct.h Tue Jan 31 12:13:53 2006
+++ linux-2.6.16-rc1-mm4.org/drivers/net/wireless/tiacx/acx_struct.h Tue Jan 31 13:51:18 2006
@@ -121,6 +121,10 @@ enum { acx_debug = 0 };
#define DEVTYPE_PCI 0
#define DEVTYPE_USB 1
+#if !defined(CONFIG_ACX_PCI) && !defined(CONFIG_ACX_USB)
+#error Driver must include PCI and/or USB support. You selected neither.
+#endif
+
#if defined(CONFIG_ACX_PCI)
#if !defined(CONFIG_ACX_USB)
#define IS_PCI(priv) 1
^ permalink raw reply
* Re: [BUG] 8139too fails for ip autoconfig and nfsroot
From: Knut Petersen @ 2006-01-31 11:03 UTC (permalink / raw)
To: linux-kernel; +Cc: netdev, jgarzik
In-Reply-To: <43DE7035.1040806@t-online.de>
Knut Petersen wrote:
> but found none. Skipping ip autoconfig is no solution, the kernel then
> fails trying rpc lookup.
>
> Then I tried to netboot another system with the same kernel + via
> rhine driver, same server
> config. Voila, dhcp ip autoconfig and rpc port lookup is not a problem
> on this system.
>
> During my search for a solution I tried some recent kernels, the
> oldest 2.6.14. All fail with 8139too.
>
> Any ideas?
>
It does work now. How?
I enabled "Use PIO instead of MMIO". Everything started to work.
I disabled "Use PIO instead of MMIO" and enabled "Use older RX-reset
method".
Everything still fine.
The crazy thing is that it does work now even with both of the options
disabled.
It does work even after complete power removal for several hours.
cu,
Knut
^ permalink raw reply
* Re: ip_conntrack related slab error (Re: Fw: Re: 2.6.16-rc1-mm3)
From: Harald Welte @ 2006-01-31 10:28 UTC (permalink / raw)
To: Reuben Farrelly
Cc: Andrew Morton, Linux Kernel Mailinglist, Linux Netdev List
In-Reply-To: <43DF3677.8040701@reub.net>
[-- Attachment #1: Type: text/plain, Size: 1978 bytes --]
On Tue, Jan 31, 2006 at 11:05:43PM +1300, Reuben Farrelly wrote:
> >>slab error in kmem_cache_destroy(): cache `ip_conntrack': Can't free all objects
> >> [<b010412b>] show_trace+0xd/0xf
> >> [<b01041cc>] dump_stack+0x17/0x19
> >> [<b0155d04>] kmem_cache_destroy+0x9b/0x1a9
> >> [<f0ebf701>] ip_conntrack_cleanup+0x5d/0x10e [ip_conntrack]
> >> [<f0ebe31e>] init_or_cleanup+0x1f8/0x283 [ip_conntrack]
> >> [<f0ec2c4e>] fini+0xa/0x66 [ip_conntrack]
> >> [<b0136d06>] sys_delete_module+0x161/0x1fb
> >> [<b0102b3f>] sysenter_past_esp+0x54/0x75
> >>Removing netfilter NETLINK layer.
> >>[root@tornado log]#
> >>I was just reading IMAP mail at the time, ie same as I'd been doing for an hour or two beforehand and not
> >>altering config of the box in any way. I was able to log on via console but lost all network connectivity and
> >>had to reboot :(
> >The codepath you see in that backtrace is only hit during load or
> >removal of the 'ip_conntrack' module. While this certainly still should
> >not oops, your description of 'not doing anything but IMAP reading' is
> >certainly not true.
>
> With the greatest of respect (which I do have for you Harald), I don't
> think being essentially called a liar is very fair.
I didn't want to imply that you are lying, but merely point out that
something was going on on your system that you didn't be aware of.
Sorry if that was to be misunderstood.
Without knowing what actually happened at the time you encountered the
bug, it is hard for me to try and reproduce / understand it.
This is not a lame excuse.
--
- Harald Welte <laforge@netfilter.org> http://netfilter.org/
============================================================================
"Fragmentation is like classful addressing -- an interesting early
architectural error that shows how much experimentation was going
on while IP was being designed." -- Paul Vixie
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* Re: ip_conntrack related slab error (Re: Fw: Re: 2.6.16-rc1-mm3)
From: Reuben Farrelly @ 2006-01-31 10:07 UTC (permalink / raw)
To: Harald Welte; +Cc: Andrew Morton, Linux Kernel Mailinglist, Linux Netdev List
In-Reply-To: <20060131092447.GL4603@sunbeam.de.gnumonks.org>
On 31/01/2006 10:24 p.m., Harald Welte wrote:
>> Begin forwarded message:
>>
>> Date: Sat, 28 Jan 2006 00:47:06 +1300
>> From: Reuben Farrelly <reuben-lkml@reub.net>
>> To: Andrew Morton <akpm@osdl.org>
>> Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org
>> Subject: Re: 2.6.16-rc1-mm3
>>
>> Just triggered this one, which had a fairly bad effect on connectivity to the box:
>>
>> i2c /dev entries driver
>> slab error in kmem_cache_destroy(): cache `ip_conntrack': Can't free all objects
>> [<b010412b>] show_trace+0xd/0xf
>> [<b01041cc>] dump_stack+0x17/0x19
>> [<b0155d04>] kmem_cache_destroy+0x9b/0x1a9
>> [<f0ebf701>] ip_conntrack_cleanup+0x5d/0x10e [ip_conntrack]
>> [<f0ebe31e>] init_or_cleanup+0x1f8/0x283 [ip_conntrack]
>> [<f0ec2c4e>] fini+0xa/0x66 [ip_conntrack]
>> [<b0136d06>] sys_delete_module+0x161/0x1fb
>> [<b0102b3f>] sysenter_past_esp+0x54/0x75
>> Removing netfilter NETLINK layer.
>> [root@tornado log]#
>>
>> I was just reading IMAP mail at the time, ie same as I'd been doing for an hour
>> or two beforehand and not altering config of the box in any way. I was able to
>> log on via console but lost all network connectivity and had to reboot :(
>
> The codepath you see in that backtrace is only hit during load or
> removal of the 'ip_conntrack' module. While this certainly still should
> not oops, your description of 'not doing anything but IMAP reading' is
> certainly not true.
>
> Could you please describe what actually happened when that bug happened?
> It looks to me that you were unloading ip_conntrack_netlink.ko followed
> by ip_conntrack.ko.
This just happened, in fact while I was typing up my previous mail. I only
noticed because I went to send and connection to the server timed out:
I'm not sure if this is related or not.
Fedora Core release 4 (Rawhide)
Kernel 2.6.16-rc1-mm4 on an i686
tornado.reub.net login: BUG: unable to handle kernel paging request at virtual
address 00200200
printing eip:
f0eb410d
*pde = 00000000
Oops: 0000 [#1]
SMP
last sysfs file: /block/fd0/dev
Modules linked in: nfsd exportfs lockd sunrpc lm85 hwmon_vid eeprom ipv6 ip_gre
iptable_filter iptable_nat ip_nat ip_conntrack nfnetlink iptable_mangle
ip_tables binfmt_misc ide_cd cdrom serio_raw hw_random piix i2c_i801
CPU: 0
EIP: 0060:[<f0eb410d>] Not tainted VLI
EFLAGS: 00010292 (2.6.16-rc1-mm4 #2)
EIP is at ip_nat_cleanup_conntrack+0x22/0x62 [ip_nat]
eax: dbcb0570 ebx: d6f9164c ecx: d6f916c8 edx: 00200200
esi: d6f9164c edi: eef02380 ebp: b044ce74 esp: b044ce70
ds: 007b es: 007b ss: 0068
Process smbd (pid: 2517, threadinfo=b044c000 task=dbcb0570)
Stack: <0>d6f9164c b044ce88 f0ec0251 00004599 d6f9164c d52aca80 b044cee4 b02e9914
b044ceb4 b02c6b49 00000000 00000277 00000277 00000002 0100007f 0100007f
b0487508 b044cee4 b02c6d6d 02772e80 027747ab ef856ff4 b02cd972 80000000
Call Trace:
[<b0103bf5>] show_stack_log_lvl+0xc5/0xea
[<b0103db7>] show_registers+0x19d/0x22b
[<b0103f61>] die+0x11c/0x22c
[<b01140e4>] do_page_fault+0x27a/0x5de
[<b0103737>] error_code+0x4f/0x54
[<f0ec0251>] destroy_conntrack+0x4c/0x13e [ip_conntrack]
[<b02e9914>] tcp_v4_rcv+0xad9/0xb25
[<b02ce33e>] ip_local_deliver+0x92/0x2d4
[<b02cdfd2>] ip_rcv+0x331/0x60b
[<b02b3638>] netif_receive_skb+0x219/0x302
[<b02b506b>] process_backlog+0x8e/0x12e
[<b02b51c6>] net_rx_action+0xbb/0x1c4
[<b01213cd>] __do_softirq+0x70/0xd7
[<b0105071>] do_softirq+0x4f/0x53
=======================
[<b0121480>] local_bh_enable+0x4c/0x79
[<b02b536d>] dev_queue_xmit+0x9e/0x305
[<b02d3d72>] ip_output+0x17d/0x32b
[<b02d31d2>] ip_queue_xmit+0x240/0x53e
[<b02e2562>] tcp_transmit_skb+0x3bd/0x6c9
[<b02e29b1>] tcp_send_ack+0xa2/0xdf
[<b02d826c>] cleanup_rbuf+0x40/0xf0
[<b02d9f59>] tcp_recvmsg+0x1b0/0x7b2
[<b02ab6ab>] sock_common_recvmsg+0x3d/0x53
[<b02a9b1e>] sock_recvmsg+0xda/0xfe
[<b02aae39>] sys_recvfrom+0x79/0xbe
[<b02aaeb4>] sys_recv+0x36/0x38
[<b02ab209>] sys_socketcall+0x158/0x254
[<b0102b3f>] sysenter_past_esp+0x54/0x75
Code: 5d c3 b9 60 73 eb f0 eb f5 55 89 e5 53 89 c3 f7 40 08 80 01 00 00 75 03 5b
5d c3 b8 40 73 eb f0 e8 f4 cc 45 bf 8d 4b 7c 8b 51 04 <3b> 0a 75 28 8b 43 7c 3b
48 04 75 2a 89 50 04 89 02 c7 43 7c 00
<0>Kernel panic - not syncing: Fatal exception in interrupt
<0>Rebooting in 60 seconds..
reuben
^ permalink raw reply
* Re: ip_conntrack related slab error (Re: Fw: Re: 2.6.16-rc1-mm3)
From: Reuben Farrelly @ 2006-01-31 10:05 UTC (permalink / raw)
To: Harald Welte; +Cc: Andrew Morton, Linux Kernel Mailinglist, Linux Netdev List
In-Reply-To: <20060131092447.GL4603@sunbeam.de.gnumonks.org>
On 31/01/2006 10:24 p.m., Harald Welte wrote:
>> Begin forwarded message:
>>
>> Date: Sat, 28 Jan 2006 00:47:06 +1300
>> From: Reuben Farrelly <reuben-lkml@reub.net>
>> To: Andrew Morton <akpm@osdl.org>
>> Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org
>> Subject: Re: 2.6.16-rc1-mm3
>>
>> Just triggered this one, which had a fairly bad effect on connectivity to the box:
>>
>> i2c /dev entries driver
>> slab error in kmem_cache_destroy(): cache `ip_conntrack': Can't free all objects
>> [<b010412b>] show_trace+0xd/0xf
>> [<b01041cc>] dump_stack+0x17/0x19
>> [<b0155d04>] kmem_cache_destroy+0x9b/0x1a9
>> [<f0ebf701>] ip_conntrack_cleanup+0x5d/0x10e [ip_conntrack]
>> [<f0ebe31e>] init_or_cleanup+0x1f8/0x283 [ip_conntrack]
>> [<f0ec2c4e>] fini+0xa/0x66 [ip_conntrack]
>> [<b0136d06>] sys_delete_module+0x161/0x1fb
>> [<b0102b3f>] sysenter_past_esp+0x54/0x75
>> Removing netfilter NETLINK layer.
>> [root@tornado log]#
>>
>> I was just reading IMAP mail at the time, ie same as I'd been doing for an hour
>> or two beforehand and not altering config of the box in any way. I was able to
>> log on via console but lost all network connectivity and had to reboot :(
>
> The codepath you see in that backtrace is only hit during load or
> removal of the 'ip_conntrack' module. While this certainly still should
> not oops, your description of 'not doing anything but IMAP reading' is
> certainly not true.
With the greatest of respect (which I do have for you Harald), I don't think
being essentially called a liar is very fair.
I've no reason to not report exactly what I observed and noted and what I did or
didn't do before noting it, and while you may argue that it doesn't match with
what you expect, that doesn't mean that I'm making stuff up. More likely it
means that neither you or I understand quite what was happening at the time.
> Could you please describe what actually happened when that bug happened?
> It looks to me that you were unloading ip_conntrack_netlink.ko followed
> by ip_conntrack.ko.
It's now four days later. I wrote the email a few minutes after noting the
oops, so if I was fiddling with iptables at the time I'm sure I would have said
so. I mean, why wouldn't I?
I'll try to reproduce it, but as I've no idea what triggered it in the first
place it may be a bit tricky.
Noting that a reboot of the box does not even load the ip_conntrack_netlink
module, which if I was indeed messing with it, I would have probably had to
force the module to load. I think I'd know if I was doing that.........
>> Generic details such as .config is at http://www.reub.net/files/kernel/
>
> You don't have permission to access /files/kernel/ on this server.
Apologies. My bad, it's fixed now.
Anyway, let's get to the bottom of the problem rather than get personal about
what actually happened.
Reuben
^ permalink raw reply
* Re: [NETFILTER] NAT sequence adjustment: Save eight bytes per conntrack
From: Harald Welte @ 2006-01-31 9:26 UTC (permalink / raw)
To: Balazs Scheidler; +Cc: Linux Netdev List, Netfilter Development Mailinglist
In-Reply-To: <1138697452.5005.9.camel@bzorp.balabit>
[-- Attachment #1: Type: text/plain, Size: 759 bytes --]
On Tue, Jan 31, 2006 at 09:50:52AM +0100, Balazs Scheidler wrote:
> > - int32_t offset_before, offset_after;
> > + int16_t offset_before, offset_after;
>
> Am I missing something or is it only 4 bytes?
I knew someone would ask that question ;)
we have that structure as part of an IP_CT_DIR_MAX array, therefore it's
twice in every conntrack, and thus we save 8 bytes ;)
--
- Harald Welte <laforge@netfilter.org> http://netfilter.org/
============================================================================
"Fragmentation is like classful addressing -- an interesting early
architectural error that shows how much experimentation was going
on while IP was being designed." -- Paul Vixie
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* ip_conntrack related slab error (Re: Fw: Re: 2.6.16-rc1-mm3)
From: Harald Welte @ 2006-01-31 9:24 UTC (permalink / raw)
To: Andrew Morton
Cc: Reuben Farrelly, Linux Kernel Mailinglist, Linux Netdev List
In-Reply-To: <20060130221429.5f12d947.akpm@osdl.org>
[-- Attachment #1: Type: text/plain, Size: 2082 bytes --]
> Begin forwarded message:
>
> Date: Sat, 28 Jan 2006 00:47:06 +1300
> From: Reuben Farrelly <reuben-lkml@reub.net>
> To: Andrew Morton <akpm@osdl.org>
> Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org
> Subject: Re: 2.6.16-rc1-mm3
>
> Just triggered this one, which had a fairly bad effect on connectivity to the box:
>
> i2c /dev entries driver
> slab error in kmem_cache_destroy(): cache `ip_conntrack': Can't free all objects
> [<b010412b>] show_trace+0xd/0xf
> [<b01041cc>] dump_stack+0x17/0x19
> [<b0155d04>] kmem_cache_destroy+0x9b/0x1a9
> [<f0ebf701>] ip_conntrack_cleanup+0x5d/0x10e [ip_conntrack]
> [<f0ebe31e>] init_or_cleanup+0x1f8/0x283 [ip_conntrack]
> [<f0ec2c4e>] fini+0xa/0x66 [ip_conntrack]
> [<b0136d06>] sys_delete_module+0x161/0x1fb
> [<b0102b3f>] sysenter_past_esp+0x54/0x75
> Removing netfilter NETLINK layer.
> [root@tornado log]#
>
> I was just reading IMAP mail at the time, ie same as I'd been doing for an hour
> or two beforehand and not altering config of the box in any way. I was able to
> log on via console but lost all network connectivity and had to reboot :(
The codepath you see in that backtrace is only hit during load or
removal of the 'ip_conntrack' module. While this certainly still should
not oops, your description of 'not doing anything but IMAP reading' is
certainly not true.
Could you please describe what actually happened when that bug happened?
It looks to me that you were unloading ip_conntrack_netlink.ko followed
by ip_conntrack.ko.
> Generic details such as .config is at http://www.reub.net/files/kernel/
You don't have permission to access /files/kernel/ on this server.
--
- Harald Welte <laforge@netfilter.org> http://netfilter.org/
============================================================================
"Fragmentation is like classful addressing -- an interesting early
architectural error that shows how much experimentation was going
on while IP was being designed." -- Paul Vixie
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* Re: 2.6.16-rc1-mm4: ACX=y, ACX_USB=n compile error
From: Gabriel C. @ 2006-01-31 9:03 UTC (permalink / raw)
To: Denis Vlasenko; +Cc: da.crew, linux-kernel, Adrian Bunk, linville, netdev
In-Reply-To: <200601310810.33107.vda@ilport.com.ua>
[-- Attachment #1: Type: text/plain, Size: 1080 bytes --]
On Tue, 31 Jan 2006 08:10:32 +0200
Denis Vlasenko <vda@ilport.com.ua> wrote:
> On Monday 30 January 2006 20:10, Adrian Bunk wrote:
> > On Mon, Jan 30, 2006 at 01:38:33PM +0100, Gabriel C. wrote:
> >
> > > Hello,
> >
> > Hi Gabriel,
> >
> > > I got this compile error with 2.6.16-rc1-mm4 , config attached.
> > >
> > >
> > > LD .tmp_vmlinux1
> > > drivers/built-in.o: In function
> > > `acx_l_transmit_authen1':common.c:(.text+0x6cd62): undefined
> > > reference to `acxusb_l_alloc_tx' :common.c:(.text+0x6cd74):
> > > undefined reference to
> > > `acxusb_l_get_txbuf' :common.c:(.text+0x6cdeb): undefined
> > > reference to `acxusb_l_tx_data' drivers/built-in.o: In function
> > > `acx_s_configure_debug': undefined reference to
> > > `acxusb_s_issue_cmd_timeo_debug' drivers/built-in.o: In function
> > > [many more]
> > >...
> >
> > Thanks for your report.
> >
> > @Denis:
> > The problem seems to be CONFIG_ACX=y, CONFIG_ACX_USB=n.
>
> Thanks, will test/fix ASAP.
>
> Gabriel, please send me your .config
Hi Denis,
config is attached.
> --
> vda
Gabriel
[-- Attachment #2: 2.6.16-rc1.mm4.config --]
[-- Type: application/octet-stream, Size: 55520 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16-rc1-mm4
# Mon Jan 30 12:08:03 2006
#
CONFIG_X86_32=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
CONFIG_VM86=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
CONFIG_SERIAL_PCI=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Block layer
#
CONFIG_LBD=y
CONFIG_LSF=y
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_SCHED_SMT=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_DOUBLEFAULT=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/hda6"
CONFIG_SUSPEND_SMP=y
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_HOTKEY=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_IBM=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_SONY=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
CONFIG_APM_DISPLAY_BLANK=y
CONFIG_APM_RTC_IS_GMT=y
CONFIG_APM_ALLOW_INTS=y
CONFIG_APM_REAL_MODE_POWER_OFF=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
CONFIG_X86_P4_CLOCKMOD=y
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=y
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_SCx200=m
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
# CONFIG_PCMCIA_IOCTL is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
#
# TCP congestion control
#
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
# CONFIG_NETFILTER_XTABLES is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
# CONFIG_IP6_NF_QUEUE is not set
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
# CONFIG_BRIDGE_EBT_ULOG is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#
CONFIG_TIPC=m
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_ZONES=3
CONFIG_TIPC_CLUSTERS=1
CONFIG_TIPC_NODES=255
CONFIG_TIPC_SLAVE_NODES=0
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=y
CONFIG_LTPC=m
CONFIG_COPS=m
CONFIG_COPS_DAYNA=y
CONFIG_COPS_TANGENT=y
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_PEDIT=m
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
# CONFIG_IRLAN is not set
# CONFIG_IRNET is not set
# CONFIG_IRCOMM is not set
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set
#
# Dongle support
#
#
# Old SIR device drivers
#
#
# Old Serial dongle support
#
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
CONFIG_BT=m
# CONFIG_BT_L2CAP is not set
# CONFIG_BT_SCO is not set
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIUSB is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
CONFIG_IEEE80211=y
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=y
CONFIG_IEEE80211_CRYPT_CCMP=m
# CONFIG_IEEE80211_CRYPT_TKIP is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
CONFIG_BLK_DEV_XD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
# CONFIG_PARIDE_ATEN is not set
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
# CONFIG_PARIDE_COMM is not set
# CONFIG_PARIDE_DSTR is not set
# CONFIG_PARIDE_FIT2 is not set
# CONFIG_PARIDE_FIT3 is not set
# CONFIG_PARIDE_EPAT is not set
# CONFIG_PARIDE_EPIA is not set
# CONFIG_PARIDE_FRIQ is not set
# CONFIG_PARIDE_FRPW is not set
# CONFIG_PARIDE_KBIC is not set
# CONFIG_PARIDE_KTTI is not set
# CONFIG_PARIDE_ON20 is not set
# CONFIG_PARIDE_ON26 is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
CONFIG_BLK_DEV_OPTI621=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_ATIIXP=y
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_TRIFLEX=y
CONFIG_BLK_DEV_CY82C693=y
CONFIG_BLK_DEV_CS5520=y
CONFIG_BLK_DEV_CS5530=y
CONFIG_BLK_DEV_CS5535=m
CONFIG_BLK_DEV_HPT34X=y
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=y
CONFIG_BLK_DEV_SC1200=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_PDC202XX_BURST=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
CONFIG_BLK_DEV_SLC90E66=y
CONFIG_BLK_DEV_TRM290=y
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_IDE_CHIPSETS=y
#
# Note: most of these also require special kernel boot parameters
#
CONFIG_BLK_DEV_4DRIVES=y
CONFIG_BLK_DEV_ALI14XX=m
CONFIG_BLK_DEV_DTC2278=m
CONFIG_BLK_DEV_HT6560B=m
CONFIG_BLK_DEV_QD65XX=m
CONFIG_BLK_DEV_UMC8672=m
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SAS_CLASS=m
CONFIG_SAS_DEBUG=y
#
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
# CONFIG_SCSI_AIC94XX is not set
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_IN2000=m
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
CONFIG_MEGARAID_LEGACY=m
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
CONFIG_SCSI_SATA_AHCI=m
# CONFIG_SCSI_PATA_AMD is not set
CONFIG_SCSI_SATA_SVW=m
# CONFIG_SCSI_PATA_TRIFLEX is not set
# CONFIG_SCSI_PATA_MPIIX is not set
# CONFIG_SCSI_PATA_OLDPIIX is not set
CONFIG_SCSI_ATA_PIIX=m
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_PATA_OPTI is not set
CONFIG_SCSI_PDC_ADMA=m
CONFIG_SCSI_SATA_QSTOR=m
# CONFIG_SCSI_PATA_PDC2027X is not set
CONFIG_SCSI_SATA_PROMISE=y
CONFIG_SCSI_SATA_SX4=y
CONFIG_SCSI_SATA_SIL=y
CONFIG_SCSI_SATA_SIL24=m
# CONFIG_SCSI_PATA_SIL680 is not set
CONFIG_SCSI_SATA_SIS=y
CONFIG_SCSI_SATA_ULI=m
# CONFIG_SCSI_PATA_VIA is not set
CONFIG_SCSI_SATA_VIA=y
CONFIG_SCSI_SATA_VITESSE=m
CONFIG_SCSI_SATA_INTEL_COMBINED=y
CONFIG_SCSI_SATA_ACPI=y
CONFIG_SCSI_BUSLOGIC=y
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set
# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
# CONFIG_SCSI_GENERIC_NCR53C400 is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_PSI240I=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_FC=m
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=m
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
CONFIG_SCSI_ULTRASTOR=m
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
CONFIG_IEEE1394_EXPORT_FULL_API=y
#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_NET_SB1000=m
#
# ARCnet devices
#
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_ISA=m
CONFIG_ARCNET_COM20020_PCI=m
#
# PHY device support
#
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m
CONFIG_ARLAN=m
CONFIG_WAVELAN=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=m
#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
# CONFIG_IPW2200_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
CONFIG_HOSTAP=y
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=y
CONFIG_HOSTAP_PCI=y
CONFIG_HOSTAP_CS=y
CONFIG_ACX=y
# CONFIG_ACX_PCI is not set
# CONFIG_ACX_USB is not set
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_ARCNET_COM20020_CS=m
#
# Wan interfaces
#
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
CONFIG_COSA=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
# CONFIG_DSCC4_PCI_RST is not set
CONFIG_LANMEDIA=m
CONFIG_SEALEVEL_4021=m
CONFIG_SYNCLINK_SYNCPPP=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
#
# X.25/LAPB support is disabled
#
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300=m
CONFIG_PC300_MLPPP=y
CONFIG_N2=m
CONFIG_C101=m
CONFIG_FARSYNC=m
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_WAN_ROUTER_DRIVERS=y
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_SBNI=m
CONFIG_SBNI_MULTILINE=y
#
# ATM drivers
#
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
# CONFIG_ATM_FORE200E_PCA is not set
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
# CONFIG_KGDBOE is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_INPORT=m
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_DIGIEPCA=m
# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
CONFIG_MOXA_SMARTIO=m
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
# CONFIG_SYNCLINK_GT is not set
CONFIG_N_HDLC=m
CONFIG_SPECIALIX=m
CONFIG_SPECIALIX_RTSCTS=y
CONFIG_SX=m
CONFIG_STALDRV=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_FOURPORT=m
CONFIG_SERIAL_8250_ACCENT=m
CONFIG_SERIAL_8250_BOCA=m
CONFIG_SERIAL_8250_HUB6=m
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_TIPAR=m
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
# CONFIG_IBMASR is not set
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_I8XX_TCO=m
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=m
CONFIG_MIXCOMWD=m
CONFIG_WDT=m
CONFIG_WDT_501=y
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_HW_RANDOM=m
CONFIG_NVRAM=m
CONFIG_RTC=y
CONFIG_DTLK=m
# CONFIG_R3964 is not set
CONFIG_APPLICOM=m
# CONFIG_SONYPI is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
CONFIG_AGP_ALI=m
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_AGP_EFFICEON=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_MWAVE=m
CONFIG_SCx200_GPIO=m
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
#
# TPM devices
#
CONFIG_TCG_TPM=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_SCx200_I2C=m
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_RTC8564=m
CONFIG_SENSORS_MAX6875=m
CONFIG_RTC_X1205_I2C=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
# CONFIG_SPI_BUTTERFLY is not set
#
# SPI Protocol Masters
#
#
# Dallas's 1-wire bus
#
CONFIG_W1=m
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS9490=m
CONFIG_W1_MASTER_DS9490_BRIDGE=m
CONFIG_W1_MASTER_DS2482=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia Capabilities Port drivers
#
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
#
# Video Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_VIDEO_AUDIO_DECODER=m
CONFIG_VIDEO_DECODER=m
#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_AC97_BUS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
CONFIG_SND_SB8=m
CONFIG_SND_SB16=m
CONFIG_SND_SBAWE=m
CONFIG_SND_SB16_CSP=y
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_CS is not set
# CONFIG_USB_IP is not set
#
# USB Device Class drivers
#
# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_MTOUCH=m
CONFIG_USB_ITMTOUCH=m
CONFIG_USB_EGALAX=m
CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
CONFIG_USB_APPLETOUCH=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB Multimedia devices
#
CONFIG_USB_DABUSB=m
CONFIG_USB_VICAM=m
CONFIG_USB_DSBR=m
# CONFIG_USB_ET61X251 is not set
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_W9968CF=m
CONFIG_USB_PWC=m
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
# CONFIG_USB_NET_RNDIS_HOST is not set
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ANYDATA=m
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
# CONFIG_USB_SERIAL_OPTION is not set
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYTHERM=m
# CONFIG_USB_GOTEMP is not set
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
CONFIG_USB_TEST=m
#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
# CONFIG_USB_UEAGLEATM is not set
CONFIG_USB_XUSBATM=m
#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
CONFIG_USB_ETH=m
# CONFIG_USB_ETH_RNDIS is not set
# CONFIG_USB_GADGETFS is not set
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
#
# MMC/SD Card support
#
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
# CONFIG_MMC_BULKTRANSFER is not set
CONFIG_MMC_WBSD=m
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# SN Devices
#
#
# EDAC - error detection and reporting (RAS)
#
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_AMD76X is not set
CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_POLL=y
#
# Distributed Lock Manager
#
CONFIG_DLM=m
CONFIG_DLM_DEVICE=m
# CONFIG_DLM_DEBUG is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISER4_FS=y
# CONFIG_REISER4_DEBUG is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_EXPORT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_OCFS2_FS=m
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_PROC_VMCORE is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_RELAYFS_FS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ASFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set
#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_UNWIND_INFO is not set
CONFIG_EARLY_PRINTK=y
CONFIG_STACK_BACKTRACE_COLS=2
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=m
CONFIG_SECURITY_ROOTPLUG=m
CONFIG_SECURITY_SECLVL=m
# CONFIG_SECURITY_SELINUX is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
#
# Hardware crypto devices
#
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=y
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
^ permalink raw reply
* Re: [PATCH] [NETFILTER] nfnetlink_log: add sequence numbers for log events
From: Harald Welte @ 2006-01-31 8:54 UTC (permalink / raw)
To: Patrick McHardy
Cc: Linux Netdev List, Netfilter Development Mailinglist,
David Miller
In-Reply-To: <43DEA205.7020704@trash.net>
[-- Attachment #1: Type: text/plain, Size: 1697 bytes --]
On Tue, Jan 31, 2006 at 12:32:21AM +0100, Patrick McHardy wrote:
> Harald Welte wrote:
> > Hi Dave,
> >
> > please apply, thanks!
> >
> > [NETFILTER] nfnetlink_log: add sequence numbers for log events
> >
> > By using a sequence number for every logged netfilter event, we can
> > determine from userspace whether logging information was lots somewhere
> > downstream.
>
> BTW, I have a patch I wanted to submit on top of this, which changes the
> *LOG targets to do "reliable" logging, which means if we encounter any
> errors during logging (for example from netlink), the packet will be
> dropped. This makes as sure as possible that no connections will be
> silently accepted. Its a slight change of user-visible behaviour, but
> since it only affects corner-cases I think it should be OK. I could add
> some flags to retain the current behaviour, but I think its not worth
> it.
I think it is very much required to have such a flag. (we can actually
add it to the nfnetlink_log flags). It really depends on your setup.
Some people really really want to have logging reliable, others fear
that they might easily be DoS'ed, if logging has higher priority than
packet forwarding.
> Any objections?
If it's optional (and the default is unreliable), then I think it's a
great idea.
--
- Harald Welte <laforge@netfilter.org> http://netfilter.org/
============================================================================
"Fragmentation is like classful addressing -- an interesting early
architectural error that shows how much experimentation was going
on while IP was being designed." -- Paul Vixie
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* Re: [NETFILTER] NAT sequence adjustment: Save eight bytes per conntrack
From: Balazs Scheidler @ 2006-01-31 8:50 UTC (permalink / raw)
To: Harald Welte; +Cc: Linux Netdev List, Netfilter Development Mailinglist
In-Reply-To: <20060130232209.GG4603@sunbeam.de.gnumonks.org>
On Tue, 2006-01-31 at 00:22 +0100, Harald Welte wrote:
> ---
> commit 94d3d40c84672b74e59ea5252f61602610e1513e
> tree 63e5ae5174af9f982be6d8d1bbe11e750e4ace32
> parent e3c7a1f99300fbd6de35a40fcd9c4dc1b0fbfee2
> author Harald Welte <laforge@netfilter.org> Fri, 27 Jan 2006 16:03:45 +0100
> committer Harald Welte <laforge@netfilter.org> Fri, 27 Jan 2006 16:03:45 +0100
>
> include/linux/netfilter_ipv4/ip_nat.h | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/include/linux/netfilter_ipv4/ip_nat.h b/include/linux/netfilter_ipv4/ip_nat.h
> index 41a107d..e9f5ed1 100644
> --- a/include/linux/netfilter_ipv4/ip_nat.h
> +++ b/include/linux/netfilter_ipv4/ip_nat.h
> @@ -23,7 +23,7 @@ struct ip_nat_seq {
> * modification (if any) */
> u_int32_t correction_pos;
> /* sequence number offset before and after last modification */
> - int32_t offset_before, offset_after;
> + int16_t offset_before, offset_after;
> };
Am I missing something or is it only 4 bytes?
--
Bazsi
^ permalink raw reply
* Re: skge bridge & hw csum failure (Was: Re: [BUG] sky2 broken for Yukon PCI-E Gigabit Ethernet Controller 11ab:4362 (rev 19))
From: Pekka Pietikainen @ 2006-01-31 8:14 UTC (permalink / raw)
To: Stephen Hemminger
Cc: Herbert Xu, Knut Petersen, netdev, linux-kernel, David S. Miller
In-Reply-To: <20060130161551.623a3ad0@dxpl.pdx.osdl.net>
On Mon, Jan 30, 2006 at 04:15:51PM -0800, Stephen Hemminger wrote:
> Okay, what is the hardware version:
> dmesg | grep skge
> Maybe that chip rev is no good.
skge 1.3 addr 0xd042c000 irq 169 chip Yukon-Lite rev 7
skge eth0: addr 00:10:f3:06:83:d4
skge 1.3 addr 0xd0420000 irq 193 chip Yukon-Lite rev 7
skge eth1: addr 00:10:f3:06:83:d5
skge 1.3 addr 0xd0424000 irq 185 chip Yukon-Lite rev 7
skge eth2: addr 00:10:f3:06:83:d6
skge 1.3 addr 0xd0428000 irq 177 chip Yukon-Lite rev 7
skge eth3: addr 00:10:f3:06:83:d7
In related news, the box has been running with a 2.6.16-rc1-git4 based
kernel for 8 hours now without any errors. First kernel+driver version
that does that (apart from vendor-sk98lin on a kernel without slab
debugging ;) ;) ;) ).
^ permalink raw reply
* Re: 2.6.16-rc1-mm4: ACX=y, ACX_USB=n compile error
From: Denis Vlasenko @ 2006-01-31 6:10 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Gabriel C., linville, linux-kernel, da.crew, netdev
In-Reply-To: <20060130181039.GC3655@stusta.de>
On Monday 30 January 2006 20:10, Adrian Bunk wrote:
> On Mon, Jan 30, 2006 at 01:38:33PM +0100, Gabriel C. wrote:
>
> > Hello,
>
> Hi Gabriel,
>
> > I got this compile error with 2.6.16-rc1-mm4 , config attached.
> >
> >
> > LD .tmp_vmlinux1
> > drivers/built-in.o: In function
> > `acx_l_transmit_authen1':common.c:(.text+0x6cd62): undefined reference
> > to `acxusb_l_alloc_tx' :common.c:(.text+0x6cd74): undefined reference
> > to `acxusb_l_get_txbuf' :common.c:(.text+0x6cdeb): undefined reference
> > to `acxusb_l_tx_data' drivers/built-in.o: In function
> > `acx_s_configure_debug': undefined reference to
> > `acxusb_s_issue_cmd_timeo_debug' drivers/built-in.o: In function
> > [many more]
> >...
>
> Thanks for your report.
>
> @Denis:
> The problem seems to be CONFIG_ACX=y, CONFIG_ACX_USB=n.
Thanks, will test/fix ASAP.
Gabriel, please send me your .config
--
vda
^ permalink raw reply
* Re: skge bridge & hw csum failure (Was: Re: [BUG] sky2 broken for Yukon PCI-E Gigabit Ethernet Controller 11ab:4362 (rev 19))
From: Stephen Hemminger @ 2006-01-31 0:15 UTC (permalink / raw)
To: Pekka Pietikainen
Cc: Herbert Xu, Knut Petersen, netdev, linux-kernel, David S. Miller
In-Reply-To: <20060130231658.GA6952@ee.oulu.fi>
On Tue, 31 Jan 2006 01:16:59 +0200
Pekka Pietikainen <pp@ee.oulu.fi> wrote:
> On Fri, Jan 27, 2006 at 11:22:42PM +1100, Herbert Xu wrote:
> > OK, although we can't rule out sky2/netfilter from the enquiry, I've
> > identified two bugs in ppp/pppoe that may be responsible for what you
> > are seeing. So please try the following patch and let us know if the
> > problem still exists (or deteriorates/improves).
> Borrowing this thread for a related problem, I'm getting lots of those on a
> bridge device (this one running skge, rmmod skge; modprobe sk98lin actually
> seemed to do it too, I've disabled rx checksums with ethtool for now).
> Kernel is a 2.6.15.1-ish Fedora one.
Okay, what is the hardware version:
dmesg | grep skge
Maybe that chip rev is no good.
^ permalink raw reply
* Re: [PATCH] [NETFILTER] nfnetlink_log: add sequence numbers for log events
From: David S. Miller @ 2006-01-30 23:50 UTC (permalink / raw)
To: laforge; +Cc: netdev, netfilter-devel
In-Reply-To: <20060130232348.GH4603@sunbeam.de.gnumonks.org>
From: Harald Welte <laforge@netfilter.org>
Date: Tue, 31 Jan 2006 00:23:48 +0100
> [NETFILTER] nfnetlink_log: add sequence numbers for log events
>
> By using a sequence number for every logged netfilter event, we can
> determine from userspace whether logging information was lots somewhere
> downstream.
>
> The user has a choice of either having per-instance local sequence
> counters, or using a global sequence counter, or both.
>
> Signed-off-by: Harald Welte <laforge@netfilter.org>
Also applied to net-2.6.17, thanks.
^ permalink raw reply
* Re: [NETFILTER] NAT sequence adjustment: Save eight bytes per conntrack
From: David S. Miller @ 2006-01-30 23:50 UTC (permalink / raw)
To: laforge; +Cc: netdev, netfilter-devel
In-Reply-To: <20060130232209.GG4603@sunbeam.de.gnumonks.org>
From: Harald Welte <laforge@netfilter.org>
Date: Tue, 31 Jan 2006 00:22:09 +0100
> [NETFILTER] NAT sequence adjustment: Save eight bytes per conntrack
>
> This patch reduces the size of 'struct ip_conntrack' on systems with NAT
> by eight bytes. The sequence number delta values can be int16_t, since
> we only support one sequence number modification per window anyway, and
> one such modification is not going to exceed 32kB ;)
>
> Signed-off-by: Harald Welte <laforge@netfilter.org>
Applied to net-2.6.17, thanks Harald.
^ permalink raw reply
* Re: [PATCH] [NETFILTER] nfnetlink_log: add sequence numbers for log events
From: Patrick McHardy @ 2006-01-30 23:32 UTC (permalink / raw)
To: Harald Welte
Cc: Linux Netdev List, Netfilter Development Mailinglist,
David Miller
In-Reply-To: <20060130232348.GH4603@sunbeam.de.gnumonks.org>
Harald Welte wrote:
> Hi Dave,
>
> please apply, thanks!
>
> [NETFILTER] nfnetlink_log: add sequence numbers for log events
>
> By using a sequence number for every logged netfilter event, we can
> determine from userspace whether logging information was lots somewhere
> downstream.
BTW, I have a patch I wanted to submit on top of this, which changes the
*LOG targets to do "reliable" logging, which means if we encounter any
errors during logging (for example from netlink), the packet will be
dropped. This makes as sure as possible that no connections will be
silently accepted. Its a slight change of user-visible behaviour, but
since it only affects corner-cases I think it should be OK. I could add
some flags to retain the current behaviour, but I think its not worth
it. For ULOG its only possible to do this without queueing, so if
qthreshold > 1 we will keep the old behaviour, LOG can't fail anyway.
Any objections?
^ permalink raw reply
* [PATCH] [NETFILTER] nfnetlink_log: add sequence numbers for log events
From: Harald Welte @ 2006-01-30 23:23 UTC (permalink / raw)
To: David Miller; +Cc: Linux Netdev List, Netfilter Development Mailinglist
[-- Attachment #1: Type: text/plain, Size: 6290 bytes --]
Hi Dave,
please apply, thanks!
[NETFILTER] nfnetlink_log: add sequence numbers for log events
By using a sequence number for every logged netfilter event, we can
determine from userspace whether logging information was lots somewhere
downstream.
The user has a choice of either having per-instance local sequence
counters, or using a global sequence counter, or both.
Signed-off-by: Harald Welte <laforge@netfilter.org>
---
commit e3c7a1f99300fbd6de35a40fcd9c4dc1b0fbfee2
tree fa0df65edd0ec729af8033c0605b19dc49c1a688
parent 1259fffe55307fa41e932a594442aa78e1e37cfd
author Harald Welte <laforge@netfilter.org> Thu, 26 Jan 2006 15:05:29 +0100
committer Harald Welte <laforge@netfilter.org> Thu, 26 Jan 2006 15:05:29 +0100
include/linux/netfilter/nfnetlink_log.h | 6 ++++
net/netfilter/nfnetlink_log.c | 46 +++++++++++++++++++++++++++++++
2 files changed, 52 insertions(+), 0 deletions(-)
diff --git a/include/linux/netfilter/nfnetlink_log.h b/include/linux/netfilter/nfnetlink_log.h
index b04b038..a7497c7 100644
--- a/include/linux/netfilter/nfnetlink_log.h
+++ b/include/linux/netfilter/nfnetlink_log.h
@@ -47,6 +47,8 @@ enum nfulnl_attr_type {
NFULA_PAYLOAD, /* opaque data payload */
NFULA_PREFIX, /* string prefix */
NFULA_UID, /* user id of socket */
+ NFULA_SEQ, /* instance-local sequence number */
+ NFULA_SEQ_GLOBAL, /* global sequence number */
__NFULA_MAX
};
@@ -77,6 +79,7 @@ enum nfulnl_attr_config {
NFULA_CFG_NLBUFSIZ, /* u_int32_t buffer size */
NFULA_CFG_TIMEOUT, /* u_int32_t in 1/100 s */
NFULA_CFG_QTHRESH, /* u_int32_t */
+ NFULA_CFG_FLAGS, /* u_int16_t */
__NFULA_CFG_MAX
};
#define NFULA_CFG_MAX (__NFULA_CFG_MAX -1)
@@ -85,4 +88,7 @@ enum nfulnl_attr_config {
#define NFULNL_COPY_META 0x01
#define NFULNL_COPY_PACKET 0x02
+#define NFULNL_CFG_F_SEQ 0x0001
+#define NFULNL_CFG_F_SEQ_GLOBAL 0x0002
+
#endif /* _NFNETLINK_LOG_H */
diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c
index e10512e..a98d0b7 100644
--- a/net/netfilter/nfnetlink_log.c
+++ b/net/netfilter/nfnetlink_log.c
@@ -11,6 +11,10 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
+ * 2006-01-26 Harald Welte <laforge@netfilter.org>
+ * - Add optional local and global sequence number to detect lost
+ * events from userspace
+ *
*/
#include <linux/module.h>
#include <linux/skbuff.h>
@@ -68,11 +72,14 @@ struct nfulnl_instance {
unsigned int nlbufsiz; /* netlink buffer allocation size */
unsigned int qthreshold; /* threshold of the queue */
u_int32_t copy_range;
+ u_int32_t seq; /* instance-local sequential counter */
u_int16_t group_num; /* number of this queue */
+ u_int16_t flags;
u_int8_t copy_mode;
};
static DEFINE_RWLOCK(instances_lock);
+static atomic_t global_seq;
#define INSTANCE_BUCKETS 16
static struct hlist_head instance_table[INSTANCE_BUCKETS];
@@ -310,6 +317,16 @@ nfulnl_set_qthresh(struct nfulnl_instanc
return 0;
}
+static int
+nfulnl_set_flags(struct nfulnl_instance *inst, u_int16_t flags)
+{
+ spin_lock_bh(&inst->lock);
+ inst->flags = ntohs(flags);
+ spin_unlock_bh(&inst->lock);
+
+ return 0;
+}
+
static struct sk_buff *nfulnl_alloc_skb(unsigned int inst_size,
unsigned int pkt_size)
{
@@ -373,6 +390,8 @@ static void nfulnl_timer(unsigned long d
spin_unlock_bh(&inst->lock);
}
+/* This is an inline function, we don't really care about a long
+ * list of arguments */
static inline int
__build_packet_message(struct nfulnl_instance *inst,
const struct sk_buff *skb,
@@ -511,6 +530,17 @@ __build_packet_message(struct nfulnl_ins
read_unlock_bh(&skb->sk->sk_callback_lock);
}
+ /* local sequence number */
+ if (inst->flags & NFULNL_CFG_F_SEQ) {
+ tmp_uint = htonl(inst->seq++);
+ NFA_PUT(inst->skb, NFULA_SEQ, sizeof(tmp_uint), &tmp_uint);
+ }
+ /* global sequence number */
+ if (inst->flags & NFULNL_CFG_F_SEQ_GLOBAL) {
+ tmp_uint = atomic_inc_return(&global_seq);
+ NFA_PUT(inst->skb, NFULA_SEQ_GLOBAL, sizeof(tmp_uint), &tmp_uint);
+ }
+
if (data_len) {
struct nfattr *nfa;
int size = NFA_LENGTH(data_len);
@@ -603,6 +633,11 @@ nfulnl_log_packet(unsigned int pf,
spin_lock_bh(&inst->lock);
+ if (inst->flags & NFULNL_CFG_F_SEQ)
+ size += NFA_SPACE(sizeof(u_int32_t));
+ if (inst->flags & NFULNL_CFG_F_SEQ_GLOBAL)
+ size += NFA_SPACE(sizeof(u_int32_t));
+
qthreshold = inst->qthreshold;
/* per-rule qthreshold overrides per-instance */
if (qthreshold > li->u.ulog.qthreshold)
@@ -732,10 +767,14 @@ static const int nfula_min[NFULA_MAX] =
[NFULA_TIMESTAMP-1] = sizeof(struct nfulnl_msg_packet_timestamp),
[NFULA_IFINDEX_INDEV-1] = sizeof(u_int32_t),
[NFULA_IFINDEX_OUTDEV-1]= sizeof(u_int32_t),
+ [NFULA_IFINDEX_PHYSINDEV-1] = sizeof(u_int32_t),
+ [NFULA_IFINDEX_PHYSOUTDEV-1] = sizeof(u_int32_t),
[NFULA_HWADDR-1] = sizeof(struct nfulnl_msg_packet_hw),
[NFULA_PAYLOAD-1] = 0,
[NFULA_PREFIX-1] = 0,
[NFULA_UID-1] = sizeof(u_int32_t),
+ [NFULA_SEQ-1] = sizeof(u_int32_t),
+ [NFULA_SEQ_GLOBAL-1] = sizeof(u_int32_t),
};
static const int nfula_cfg_min[NFULA_CFG_MAX] = {
@@ -744,6 +783,7 @@ static const int nfula_cfg_min[NFULA_CFG
[NFULA_CFG_TIMEOUT-1] = sizeof(u_int32_t),
[NFULA_CFG_QTHRESH-1] = sizeof(u_int32_t),
[NFULA_CFG_NLBUFSIZ-1] = sizeof(u_int32_t),
+ [NFULA_CFG_FLAGS-1] = sizeof(u_int16_t),
};
static int
@@ -855,6 +895,12 @@ nfulnl_recv_config(struct sock *ctnl, st
nfulnl_set_qthresh(inst, ntohl(qthresh));
}
+ if (nfula[NFULA_CFG_FLAGS-1]) {
+ u_int16_t flags =
+ *(u_int16_t *)NFA_DATA(nfula[NFULA_CFG_FLAGS-1]);
+ nfulnl_set_flags(inst, ntohl(flags));
+ }
+
out_put:
instance_put(inst);
return ret;
--
- Harald Welte <laforge@netfilter.org> http://netfilter.org/
============================================================================
"Fragmentation is like classful addressing -- an interesting early
architectural error that shows how much experimentation was going
on while IP was being designed." -- Paul Vixie
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox