* Re: [PATCH] RCU: don't turn off lockdep when find suspicious rcu_dereference_check() usage
From: Paul E. McKenney @ 2010-04-25 2:34 UTC (permalink / raw)
To: Miles Lane
Cc: Vivek Goyal, Eric Paris, Lai Jiangshan, Ingo Molnar,
Peter Zijlstra, LKML, nauman, eric.dumazet, netdev, Jens Axboe,
Gui Jianfeng, Li Zefan, Johannes Berg
In-Reply-To: <m2xa44ae5cd1004231559hcf90671asf146a43b4748c2c3@mail.gmail.com>
On Fri, Apr 23, 2010 at 06:59:12PM -0400, Miles Lane wrote:
> On Fri, Apr 23, 2010 at 3:42 PM, Paul E. McKenney
> <paulmck@linux.vnet.ibm.com> wrote:
> > On Fri, Apr 23, 2010 at 08:50:59AM -0400, Miles Lane wrote:
> >> Hi Paul,
> >> There has been a bit of back and forth, and I am not sure what patches
> >> I should test now.
> >> Could you send me a bundle of whatever needs testing now?
> >
> > Hello, Miles,
> >
> > I am posting my set as replies to this message. There are a couple
> > of KVM fixes that are going up via Avi's tree, and a number of networking
> > fixes that are going up via Dave Miller's tree -- a number of these
> > are against quickly changing code, so it didn't make sense for me to
> > keep them separately.
> >
> > I believe that the two splats below are addressed by this patch set
> > carried in the networking tree:
> >
> > https://patchwork.kernel.org/patch/90754/
>
> With your twelve patches and the one linked to above applied to
> 2.6.34-rc5-git3, here are the warnings I see:
>
> [ 0.173969] [ INFO: suspicious rcu_dereference_check() usage. ]
> [ 0.174097] ---------------------------------------------------
> [ 0.174226] include/linux/cgroup.h:534 invoked
> rcu_dereference_check() without protection!
> [ 0.174429]
> [ 0.174430] other info that might help us debug this:
> [ 0.174431]
> [ 0.174792]
> [ 0.174793] rcu_scheduler_active = 1, debug_locks = 1
> [ 0.175037] no locks held by watchdog/0/5.
> [ 0.175162]
> [ 0.175163] stack backtrace:
> [ 0.175405] Pid: 5, comm: watchdog/0 Not tainted 2.6.34-rc5-git3 #22
> [ 0.175534] Call Trace:
> [ 0.175666] [<ffffffff81067fbe>] lockdep_rcu_dereference+0x9d/0xa5
> [ 0.175799] [<ffffffff8102d678>] task_subsys_state+0x59/0x70
> [ 0.175931] [<ffffffff810328fa>] __sched_setscheduler+0x19d/0x300
> [ 0.176064] [<ffffffff8102b477>] ? need_resched+0x1e/0x28
> [ 0.176196] [<ffffffff813cd401>] ? schedule+0x5c3/0x66e
> [ 0.176327] [<ffffffff81091943>] ? watchdog+0x0/0x8c
> [ 0.176457] [<ffffffff81032a78>] sched_setscheduler+0xe/0x10
> [ 0.176587] [<ffffffff8109196d>] watchdog+0x2a/0x8c
> [ 0.176677] [<ffffffff81091943>] ? watchdog+0x0/0x8c
> [ 0.176808] [<ffffffff81057152>] kthread+0x89/0x91
> [ 0.176939] [<ffffffff8106891e>] ? trace_hardirqs_on_caller+0x114/0x13f
> [ 0.177073] [<ffffffff81003994>] kernel_thread_helper+0x4/0x10
> [ 0.177204] [<ffffffff813cfc40>] ? restore_args+0x0/0x30
> [ 0.177334] [<ffffffff810570c9>] ? kthread+0x0/0x91
> [ 0.177463] [<ffffffff81003990>] ? kernel_thread_helper+0x0/0x10
According to Documentation/cgroups/cgroups.txt, we must hold cgroup_mutex,
the task's task_alloc lock, or be in an RCU read-side critical section.
We are in neither of these.
I would argue that sched_setscheduler() should take care of
synchronization, but am not sure which of these three are appropriate
for sched_setscheduler() to acquire. Peter, thoughts?
> [ 3.173419] [ INFO: suspicious rcu_dereference_check() usage. ]
> [ 3.173419] ---------------------------------------------------
> [ 3.173419] kernel/cgroup.c:4438 invoked rcu_dereference_check()
> without protection!
> [ 3.173419]
> [ 3.173419] other info that might help us debug this:
> [ 3.173419]
> [ 3.173419]
> [ 3.173419] rcu_scheduler_active = 1, debug_locks = 1
> [ 3.173419] 2 locks held by async/0/668:
> [ 3.173419] #0: (&shost->scan_mutex){+.+.+.}, at:
> [<ffffffff812df020>] __scsi_add_device+0x83/0xe4
> [ 3.173419] #1: (&(&blkcg->lock)->rlock){......}, at:
> [<ffffffff811f2df9>] blkiocg_add_blkio_group+0x29/0x7f
> [ 3.173419]
> [ 3.173419] stack backtrace:
> [ 3.173419] Pid: 668, comm: async/0 Not tainted 2.6.34-rc5-git3 #22
> [ 3.173419] Call Trace:
> [ 3.173419] [<ffffffff81067fbe>] lockdep_rcu_dereference+0x9d/0xa5
> [ 3.173419] [<ffffffff8107f9ad>] css_id+0x3f/0x51
> [ 3.173419] [<ffffffff811f2e08>] blkiocg_add_blkio_group+0x38/0x7f
> [ 3.173419] [<ffffffff811f4dd0>] cfq_init_queue+0xdf/0x2dc
> [ 3.173419] [<ffffffff811e33b1>] elevator_init+0xba/0xf5
> [ 3.173419] [<ffffffff812dbfaa>] ? scsi_request_fn+0x0/0x451
> [ 3.173419] [<ffffffff811e68d7>] blk_init_queue_node+0x12f/0x135
> [ 3.173419] [<ffffffff811e68e9>] blk_init_queue+0xc/0xe
> [ 3.173419] [<ffffffff812dc41c>] __scsi_alloc_queue+0x21/0x111
> [ 3.173419] [<ffffffff812dc524>] scsi_alloc_queue+0x18/0x64
> [ 3.173419] [<ffffffff812de520>] scsi_alloc_sdev+0x19e/0x256
> [ 3.173419] [<ffffffff812de6be>] scsi_probe_and_add_lun+0xe6/0x9c5
> [ 3.173419] [<ffffffff8106891e>] ? trace_hardirqs_on_caller+0x114/0x13f
> [ 3.173419] [<ffffffff813ce056>] ? __mutex_lock_common+0x3e4/0x43a
> [ 3.173419] [<ffffffff812df020>] ? __scsi_add_device+0x83/0xe4
> [ 3.173419] [<ffffffff812d09dc>] ? transport_setup_classdev+0x0/0x17
> [ 3.173419] [<ffffffff812df020>] ? __scsi_add_device+0x83/0xe4
> [ 3.173419] [<ffffffff812df055>] __scsi_add_device+0xb8/0xe4
> [ 3.173419] [<ffffffff812ea945>] ata_scsi_scan_host+0x74/0x16e
> [ 3.173419] [<ffffffff81057699>] ? autoremove_wake_function+0x0/0x34
> [ 3.173419] [<ffffffff812e8de4>] async_port_probe+0xab/0xb7
> [ 3.173419] [<ffffffff8105e1b1>] ? async_thread+0x0/0x1f4
> [ 3.173419] [<ffffffff8105e2b6>] async_thread+0x105/0x1f4
> [ 3.173419] [<ffffffff81033d8e>] ? default_wake_function+0x0/0xf
> [ 3.173419] [<ffffffff8105e1b1>] ? async_thread+0x0/0x1f4
> [ 3.173419] [<ffffffff81057152>] kthread+0x89/0x91
> [ 3.173419] [<ffffffff8106891e>] ? trace_hardirqs_on_caller+0x114/0x13f
> [ 3.173419] [<ffffffff81003994>] kernel_thread_helper+0x4/0x10
> [ 3.173419] [<ffffffff813cfc40>] ? restore_args+0x0/0x30
> [ 3.173419] [<ffffffff810570c9>] ? kthread+0x0/0x91
> [ 3.173419] [<ffffffff81003990>] ? kernel_thread_helper+0x0/0x10
Please see below for a patch for this based on my earlier conversation
with Vivek Goyal. (Vivek, if you are already pushing a fix elsewhere,
please let me know, and I will drop my patch in favor of yours.)
> [ 32.905446] [ INFO: suspicious rcu_dereference_check() usage. ]
> [ 32.905449] ---------------------------------------------------
> [ 32.905453] net/core/dev.c:1993 invoked rcu_dereference_check()
> without protection!
> [ 32.905456]
> [ 32.905457] other info that might help us debug this:
> [ 32.905458]
> [ 32.905461]
> [ 32.905462] rcu_scheduler_active = 1, debug_locks = 1
> [ 32.905466] 2 locks held by canberra-gtk-pl/4182:
> [ 32.905469] #0: (sk_lock-AF_INET){+.+.+.}, at:
> [<ffffffff81394f7d>] inet_stream_connect+0x3a/0x24d
> [ 32.905483] #1: (rcu_read_lock_bh){.+....}, at:
> [<ffffffff8134a789>] dev_queue_xmit+0x14e/0x4b8
> [ 32.905495]
> [ 32.905496] stack backtrace:
> [ 32.905500] Pid: 4182, comm: canberra-gtk-pl Not tainted 2.6.34-rc5-git3 #22
> [ 32.905504] Call Trace:
> [ 32.905512] [<ffffffff81067fbe>] lockdep_rcu_dereference+0x9d/0xa5
> [ 32.905518] [<ffffffff8134a894>] dev_queue_xmit+0x259/0x4b8
> [ 32.905524] [<ffffffff8134a789>] ? dev_queue_xmit+0x14e/0x4b8
> [ 32.905531] [<ffffffff81041c66>] ? _local_bh_enable_ip+0xcd/0xda
> [ 32.905538] [<ffffffff813536da>] neigh_resolve_output+0x234/0x285
> [ 32.905544] [<ffffffff8136f69f>] ip_finish_output2+0x257/0x28c
> [ 32.905549] [<ffffffff8136f73c>] ip_finish_output+0x68/0x6a
> [ 32.905554] [<ffffffff81370433>] T.866+0x52/0x59
> [ 32.905559] [<ffffffff8137067e>] ip_output+0xaa/0xb4
> [ 32.905565] [<ffffffff8136eb38>] ip_local_out+0x20/0x24
> [ 32.905571] [<ffffffff8136f184>] ip_queue_xmit+0x309/0x368
> [ 32.905578] [<ffffffff810e4226>] ? __kmalloc_track_caller+0x111/0x155
> [ 32.905585] [<ffffffff8138316f>] ? tcp_connect+0x223/0x3d3
> [ 32.905591] [<ffffffff813818f1>] tcp_transmit_skb+0x707/0x745
> [ 32.905597] [<ffffffff813832c2>] tcp_connect+0x376/0x3d3
> [ 32.905604] [<ffffffff81268a43>] ? secure_tcp_sequence_number+0x55/0x6f
> [ 32.905610] [<ffffffff81387270>] tcp_v4_connect+0x3df/0x455
> [ 32.905617] [<ffffffff8133cb59>] ? lock_sock_nested+0xf3/0x102
> [ 32.905623] [<ffffffff81394fe7>] inet_stream_connect+0xa4/0x24d
> [ 32.905629] [<ffffffff8133b398>] sys_connect+0x90/0xd0
> [ 32.905636] [<ffffffff81002b9c>] ? sysret_check+0x27/0x62
> [ 32.905642] [<ffffffff8106891e>] ? trace_hardirqs_on_caller+0x114/0x13f
> [ 32.905649] [<ffffffff813cec80>] ? trace_hardirqs_on_thunk+0x3a/0x3f
> [ 32.905655] [<ffffffff81002b6b>] system_call_fastpath+0x16/0x1b
A fix for the above is already in Dave Miller's tree.
> [ 51.912282] [ INFO: suspicious rcu_dereference_check() usage. ]
> [ 51.912285] ---------------------------------------------------
> [ 51.912289] net/mac80211/sta_info.c:886 invoked
> rcu_dereference_check() without protection!
> [ 51.912293]
> [ 51.912293] other info that might help us debug this:
> [ 51.912295]
> [ 51.912298]
> [ 51.912298] rcu_scheduler_active = 1, debug_locks = 1
> [ 51.912302] no locks held by wpa_supplicant/3951.
> [ 51.912305]
> [ 51.912306] stack backtrace:
> [ 51.912310] Pid: 3951, comm: wpa_supplicant Not tainted 2.6.34-rc5-git3 #22
> [ 51.912314] Call Trace:
> [ 51.912317] <IRQ> [<ffffffff81067fbe>] lockdep_rcu_dereference+0x9d/0xa5
> [ 51.912345] [<ffffffffa014f9ae>]
> ieee80211_find_sta_by_hw+0x46/0x10f [mac80211]
> [ 51.912358] [<ffffffffa014fa8e>] ieee80211_find_sta+0x17/0x19 [mac80211]
> [ 51.912373] [<ffffffffa01e50f2>] iwl_tx_queue_reclaim+0xdb/0x1b1 [iwlcore]
> [ 51.912380] [<ffffffff8106842b>] ? mark_lock+0x2d/0x235
> [ 51.912391] [<ffffffffa0252f1c>] iwl5000_rx_reply_tx+0x4a9/0x556 [iwlagn]
> [ 51.912399] [<ffffffff8120a353>] ? is_swiotlb_buffer+0x2e/0x3b
> [ 51.912407] [<ffffffffa024bbf4>] iwl_rx_handle+0x163/0x2b5 [iwlagn]
> [ 51.912414] [<ffffffff81068904>] ? trace_hardirqs_on_caller+0xfa/0x13f
> [ 51.912422] [<ffffffffa024c3ac>] iwl_irq_tasklet+0x2bb/0x3c0 [iwlagn]
> [ 51.912429] [<ffffffff810411f3>] tasklet_action+0xa7/0x10f
> [ 51.912435] [<ffffffff81042205>] __do_softirq+0x144/0x252
> [ 51.912442] [<ffffffff81003a8c>] call_softirq+0x1c/0x34
> [ 51.912447] [<ffffffff810050e4>] do_softirq+0x38/0x80
> [ 51.912452] [<ffffffff81041cd2>] irq_exit+0x45/0x94
> [ 51.912457] [<ffffffff81004829>] do_IRQ+0xad/0xc4
> [ 51.912463] [<ffffffff810cbbd3>] ? might_fault+0x63/0xb3
> [ 51.912470] [<ffffffff813cfb93>] ret_from_intr+0x0/0xf
> [ 51.912474] <EOI> [<ffffffff810cbbd3>] ? might_fault+0x63/0xb3
> [ 51.912484] [<ffffffff8106a75d>] ? lock_release+0x208/0x215
> [ 51.912490] [<ffffffff810cbc1c>] might_fault+0xac/0xb3
> [ 51.912495] [<ffffffff810cbbd3>] ? might_fault+0x63/0xb3
> [ 51.912501] [<ffffffff812025e3>] __clear_user+0x15/0x59
> [ 51.912508] [<ffffffff8100b2bc>] save_i387_xstate+0x9c/0x1bc
> [ 51.912515] [<ffffffff81002276>] do_signal+0x240/0x686
> [ 51.912521] [<ffffffff81002b9c>] ? sysret_check+0x27/0x62
> [ 51.912527] [<ffffffff8106891e>] ? trace_hardirqs_on_caller+0x114/0x13f
> [ 51.912533] [<ffffffff813cec80>] ? trace_hardirqs_on_thunk+0x3a/0x3f
> [ 51.912539] [<ffffffff810026e3>] do_notify_resume+0x27/0x5f
> [ 51.912545] [<ffffffff813cec80>] ? trace_hardirqs_on_thunk+0x3a/0x3f
> [ 51.912551] [<ffffffff81002e86>] int_signal+0x12/0x17
This is a repeat from last time that confused me at the time. I could
do a hacky "fix" by putting an RCU read-side critical section around
the for_each_sta_info() in ieee80211_find_sta_by_hw(), but I do not
understand this code well enough to feel comfortable doing so.
Johannes, any enlightenment?
> [ 51.929529] [ INFO: suspicious rcu_dereference_check() usage. ]
> [ 51.929532] ---------------------------------------------------
> [ 51.929536] net/mac80211/sta_info.c:886 invoked
> rcu_dereference_check() without protection!
> [ 51.929540]
> [ 51.929541] other info that might help us debug this:
> [ 51.929542]
> [ 51.929545]
> [ 51.929546] rcu_scheduler_active = 1, debug_locks = 1
> [ 51.929550] 1 lock held by Xorg/4013:
> [ 51.929553] #0: (clock-AF_UNIX){++.+..}, at: [<ffffffff8133cebd>]
> sock_def_readable+0x19/0x62
> [ 51.929567]
> [ 51.929568] stack backtrace:
> [ 51.929573] Pid: 4013, comm: Xorg Not tainted 2.6.34-rc5-git3 #22
> [ 51.929576] Call Trace:
> [ 51.929579] <IRQ> [<ffffffff81067fbe>] lockdep_rcu_dereference+0x9d/0xa5
> [ 51.929603] [<ffffffffa014f9fe>]
> ieee80211_find_sta_by_hw+0x96/0x10f [mac80211]
> [ 51.929615] [<ffffffffa014fa8e>] ieee80211_find_sta+0x17/0x19 [mac80211]
> [ 51.929631] [<ffffffffa01e50f2>] iwl_tx_queue_reclaim+0xdb/0x1b1 [iwlcore]
> [ 51.929642] [<ffffffffa0252f1c>] iwl5000_rx_reply_tx+0x4a9/0x556 [iwlagn]
> [ 51.929649] [<ffffffff81068685>] ? mark_held_locks+0x52/0x70
> [ 51.929656] [<ffffffff813cf46c>] ? _raw_spin_unlock_irqrestore+0x3a/0x69
> [ 51.929662] [<ffffffff8120a353>] ? is_swiotlb_buffer+0x2e/0x3b
> [ 51.929671] [<ffffffffa024bbf4>] iwl_rx_handle+0x163/0x2b5 [iwlagn]
> [ 51.929680] [<ffffffffa024c3ac>] iwl_irq_tasklet+0x2bb/0x3c0 [iwlagn]
> [ 51.929687] [<ffffffff810411f3>] tasklet_action+0xa7/0x10f
> [ 51.929693] [<ffffffff81042205>] __do_softirq+0x144/0x252
> [ 51.929700] [<ffffffff81003a8c>] call_softirq+0x1c/0x34
> [ 51.929705] [<ffffffff810050e4>] do_softirq+0x38/0x80
> [ 51.929711] [<ffffffff81041cd2>] irq_exit+0x45/0x94
> [ 51.929717] [<ffffffff81019b10>] smp_apic_timer_interrupt+0x87/0x95
> [ 51.929724] [<ffffffff81003553>] apic_timer_interrupt+0x13/0x20
> [ 51.929727] <EOI> [<ffffffff813cf46e>] ?
> _raw_spin_unlock_irqrestore+0x3c/0x69
> [ 51.929739] [<ffffffff8102d3fb>] __wake_up_sync_key+0x49/0x52
> [ 51.929745] [<ffffffff8133cee7>] sock_def_readable+0x43/0x62
> [ 51.929751] [<ffffffff813b1c61>] unix_stream_sendmsg+0x243/0x2e2
> [ 51.929758] [<ffffffff8133b912>] ? sock_aio_write+0x0/0xcf
> [ 51.929764] [<ffffffff81339342>] __sock_sendmsg+0x59/0x64
> [ 51.929770] [<ffffffff8133b9cd>] sock_aio_write+0xbb/0xcf
> [ 51.929777] [<ffffffff810e9909>] do_sync_readv_writev+0xbc/0xfb
> [ 51.929785] [<ffffffff811c1792>] ? selinux_file_permission+0xa2/0xaf
> [ 51.929790] [<ffffffff810e9690>] ? copy_from_user+0x2a/0x2c
> [ 51.929797] [<ffffffff811baff1>] ? security_file_permission+0x11/0x13
> [ 51.929804] [<ffffffff810ea6a6>] do_readv_writev+0xa2/0x122
> [ 51.929810] [<ffffffff810ead93>] ? fcheck_files+0x8f/0xc9
> [ 51.929816] [<ffffffff810ea764>] vfs_writev+0x3e/0x49
> [ 51.929821] [<ffffffff810ea84a>] sys_writev+0x45/0x8e
> [ 51.929828] [<ffffffff81002b6b>] system_call_fastpath+0x16/0x1b
Ditto.
Thanx, Paul
------------------------------------------------------------------------
commit 0868dd631def762ba00c2f0f397a53c5cdf24ae2
Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Date: Sat Apr 24 19:23:30 2010 -0700
block-cgroup: fix RCU-lockdep splat in blkiocg_add_blkio_group()
It is necessary to be in an RCU read-side critical section when invoking
css_id(), so this patch adds one to blkiocg_add_blkio_group(). This is
actually a false positive, because this is called at initialization time,
and hence always refers to the root cgroup, which cannot go away.
Located-by: Miles Lane <miles.lane@gmail.com>
Suggested-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index 5fe03de..55c8c73 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -71,7 +71,9 @@ void blkiocg_add_blkio_group(struct blkio_cgroup *blkcg,
spin_lock_irqsave(&blkcg->lock, flags);
rcu_assign_pointer(blkg->key, key);
+ rcu_read_lock();
blkg->blkcg_id = css_id(&blkcg->css);
+ rcu_read_unlock();
hlist_add_head_rcu(&blkg->blkcg_node, &blkcg->blkg_list);
spin_unlock_irqrestore(&blkcg->lock, flags);
#ifdef CONFIG_DEBUG_BLK_CGROUP
^ permalink raw reply related
* Re: rps perfomance WAS(Re: rps: question
From: Changli Gao @ 2010-04-25 2:31 UTC (permalink / raw)
To: hadi; +Cc: Eric Dumazet, Rick Jones, David Miller, therbert, netdev, robert,
andi
In-Reply-To: <1271938343.4032.30.camel@bigi>
On Thu, Apr 22, 2010 at 8:12 PM, jamal <hadi@cyberus.ca> wrote:
>
>> I see slave/application cpus hit _raw_spin_lock_irqsave() and
>> _raw_spin_unlock_irqrestore().
>>
>> Maybe a ring buffer could help (instead of a double linked queue) for
>> backlog, or the double queue trick, if Changli wants to respin his
>> patch.
>>
>
> Ok, I will have some cycles later today/tommorow or for sure on weekend.
> My setup is still intact - so i can test.
>
I read the code again, and find that we don't use spin_lock_irqsave(),
and we use local_irq_save() and spin_lock() instead, so
_raw_spin_lock_irqsave() and _raw_spin_lock_irqrestore() should not be
related to backlog. the lock maybe sk_receive_queue.lock.
Jamal, did you use a single socket to serve all the clients?
BTW: completion_queue and output_queue in softnet_data both are LIFO
queues. For completion_queue, FIFO is better, as the last used skb is
more likely in cache, and should be used first. Since slab has always
cache the last used memory at the head, we'd better free the skb in
FIFO manner. For output_queue, FIFO is good for fairness among qdiscs.
--
Regards，
Changli Gao(xiaosuo@gmail.com)
^ permalink raw reply
* [PATCH 2/2] sky2: add support for receive hashing (v3)
From: Stephen Hemminger @ 2010-04-24 23:22 UTC (permalink / raw)
To: Jeff Garzik; +Cc: davem, netdev
In-Reply-To: <4BD0F8AA.2060700@garzik.org>
Subject: sky2: add support for receive hashing
Sky2 hardware supports hardware receive hash calculation.
Now that Receive Packet Steering is available, add support
to enable it.
This version does not depend on CONFIG_RPS. Also set_flags rejects
all values except RXHASH, so driver won't have to change next time
somebody adds a new one.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
---
drivers/net/sky2.c | 75 +++++++++++++++++++++++++++++++++++++++++++++++++++--
drivers/net/sky2.h | 23 ++++++++++++++++
2 files changed, 96 insertions(+), 2 deletions(-)
--- a/drivers/net/sky2.c 2010-04-23 08:56:41.444717559 -0700
+++ b/drivers/net/sky2.c 2010-04-23 08:56:51.335959014 -0700
@@ -1193,6 +1193,39 @@ static void rx_set_checksum(struct sky2_
? BMU_ENA_RX_CHKSUM : BMU_DIS_RX_CHKSUM);
}
+/* Enable/disable receive hash calculation (RSS) */
+static void rx_set_rss(struct net_device *dev)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ int i, nkeys = 4;
+
+ /* Supports IPv6 and other modes */
+ if (hw->flags & SKY2_HW_NEW_LE) {
+ nkeys = 10;
+ sky2_write32(hw, SK_REG(sky2->port, RSS_CFG), HASH_ALL);
+ }
+
+ /* Program RSS initial values */
+ if (dev->features & NETIF_F_RXHASH) {
+ u32 key[nkeys];
+
+ get_random_bytes(key, nkeys * sizeof(u32));
+ for (i = 0; i < nkeys; i++)
+ sky2_write32(hw, SK_REG(sky2->port, RSS_KEY + i * 4),
+ key[i]);
+
+ /* Need to turn on (undocumented) flag to make hashing work */
+ sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T),
+ RX_STFW_ENA);
+
+ sky2_write32(hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
+ BMU_ENA_RX_RSS_HASH);
+ } else
+ sky2_write32(hw, Q_ADDR(rxqaddr[sky2->port], Q_CSR),
+ BMU_DIS_RX_RSS_HASH);
+}
+
/*
* The RX Stop command will not work for Yukon-2 if the BMU does not
* reach the end of packet and since we can't make sure that we have
@@ -1425,6 +1458,9 @@ static void sky2_rx_start(struct sky2_po
if (!(hw->flags & SKY2_HW_NEW_LE))
rx_set_checksum(sky2);
+ if (!(hw->flags & SKY2_HW_RSS_BROKEN))
+ rx_set_rss(sky2->netdev);
+
/* submit Rx ring */
for (i = 0; i < sky2->rx_pending; i++) {
re = sky2->rx_ring + i;
@@ -2534,6 +2570,14 @@ static void sky2_rx_checksum(struct sky2
}
}
+static void sky2_rx_hash(struct sky2_port *sky2, u32 status)
+{
+ struct sk_buff *skb;
+
+ skb = sky2->rx_ring[sky2->rx_next].skb;
+ skb->rxhash = le32_to_cpu(status);
+}
+
/* Process status response ring */
static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
{
@@ -2606,6 +2650,10 @@ static int sky2_status_intr(struct sky2_
sky2_rx_checksum(sky2, status);
break;
+ case OP_RSS_HASH:
+ sky2_rx_hash(sky2, status);
+ break;
+
case OP_TXINDEXLE:
/* TX index reports status for both ports */
sky2_tx_done(hw->dev[0], status & 0xfff);
@@ -2960,6 +3008,8 @@ static int __devinit sky2_init(struct sk
switch(hw->chip_id) {
case CHIP_ID_YUKON_XL:
hw->flags = SKY2_HW_GIGABIT | SKY2_HW_NEWER_PHY;
+ if (hw->chip_rev < CHIP_REV_YU_XL_A2)
+ hw->flags |= SKY2_HW_RSS_BROKEN;
break;
case CHIP_ID_YUKON_EC_U:
@@ -2985,10 +3035,11 @@ static int __devinit sky2_init(struct sk
dev_err(&hw->pdev->dev, "unsupported revision Yukon-EC rev A1\n");
return -EOPNOTSUPP;
}
- hw->flags = SKY2_HW_GIGABIT;
+ hw->flags = SKY2_HW_GIGABIT | SKY2_HW_RSS_BROKEN;
break;
case CHIP_ID_YUKON_FE:
+ hw->flags = SKY2_HW_RSS_BROKEN;
break;
case CHIP_ID_YUKON_FE_P:
@@ -4112,6 +4163,25 @@ static int sky2_set_eeprom(struct net_de
return sky2_vpd_write(sky2->hw, cap, data, eeprom->offset, eeprom->len);
}
+static int sky2_set_flags(struct net_device *dev, u32 data)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ if (data & ~ETH_FLAG_RXHASH)
+ return -EOPNOTSUPP;
+
+ if (data & ETH_FLAG_RXHASH) {
+ if (sky2->hw->flags & SKY2_HW_RSS_BROKEN)
+ return -EINVAL;
+
+ dev->features |= NETIF_F_RXHASH;
+ } else
+ dev->features &= ~NETIF_F_RXHASH;
+
+ rx_set_rss(dev);
+
+ return 0;
+}
static const struct ethtool_ops sky2_ethtool_ops = {
.get_settings = sky2_get_settings,
@@ -4143,6 +4213,7 @@ static const struct ethtool_ops sky2_eth
.phys_id = sky2_phys_id,
.get_sset_count = sky2_get_sset_count,
.get_ethtool_stats = sky2_get_ethtool_stats,
+ .set_flags = sky2_set_flags,
};
#ifdef CONFIG_SKY2_DEBUG
@@ -4496,6 +4567,10 @@ static __devinit struct net_device *sky2
if (highmem)
dev->features |= NETIF_F_HIGHDMA;
+ /* Enable receive hashing unless hardware is known broken */
+ if (!(hw->flags & SKY2_HW_RSS_BROKEN))
+ dev->features |= NETIF_F_RXHASH;
+
#ifdef SKY2_VLAN_TAG_USED
/* The workaround for FE+ status conflicts with VLAN tag detection. */
if (!(sky2->hw->chip_id == CHIP_ID_YUKON_FE_P &&
@@ -4692,7 +4767,7 @@ static int __devinit sky2_probe(struct p
goto err_out_iounmap;
/* ring for status responses */
- hw->st_size = hw->ports * roundup_pow_of_two(2*RX_MAX_PENDING + TX_MAX_PENDING);
+ hw->st_size = hw->ports * roundup_pow_of_two(3*RX_MAX_PENDING + TX_MAX_PENDING);
hw->st_le = pci_alloc_consistent(pdev, hw->st_size * sizeof(struct sky2_status_le),
&hw->st_dma);
if (!hw->st_le)
--- a/drivers/net/sky2.h 2010-04-23 08:56:41.424736307 -0700
+++ b/drivers/net/sky2.h 2010-04-23 08:56:51.335959014 -0700
@@ -694,8 +694,21 @@ enum {
TXA_CTRL = 0x0210,/* 8 bit Tx Arbiter Control Register */
TXA_TEST = 0x0211,/* 8 bit Tx Arbiter Test Register */
TXA_STAT = 0x0212,/* 8 bit Tx Arbiter Status Register */
+
+ RSS_KEY = 0x0220, /* RSS Key setup */
+ RSS_CFG = 0x0248, /* RSS Configuration */
};
+enum {
+ HASH_TCP_IPV6_EX_CTRL = 1<<5,
+ HASH_IPV6_EX_CTRL = 1<<4,
+ HASH_TCP_IPV6_CTRL = 1<<3,
+ HASH_IPV6_CTRL = 1<<2,
+ HASH_TCP_IPV4_CTRL = 1<<1,
+ HASH_IPV4_CTRL = 1<<0,
+
+ HASH_ALL = 0x3f,
+};
enum {
B6_EXT_REG = 0x0300,/* External registers (GENESIS only) */
@@ -2261,6 +2274,7 @@ struct sky2_hw {
#define SKY2_HW_NEW_LE 0x00000020 /* new LSOv2 format */
#define SKY2_HW_AUTO_TX_SUM 0x00000040 /* new IP decode for Tx */
#define SKY2_HW_ADV_POWER_CTL 0x00000080 /* additional PHY power regs */
+#define SKY2_HW_RSS_BROKEN 0x00000100
u8 chip_id;
u8 chip_rev;
^ permalink raw reply
* [PATCH kernel 2.6.34-rc5] smc91c92_cs: spin_unlock_irqrestore before calling smc_interrupt()
From: Ken Kawasaki @ 2010-04-24 20:37 UTC (permalink / raw)
To: netdev
In-Reply-To: <20100411075014.d3e80847.ken_kawasaki@spring.nifty.jp>
smc91c92_cs:
* spin_unlock_irqrestore before calling smc_interrupt() in media_check()
to avoid lockup.
* use spin_lock_irqsave for ethtool function.
Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
---
--- linux-2.6.34-rc5/drivers/net/pcmcia/smc91c92_cs.c.orig 2010-04-24 07:33:50.000000000 +0900
+++ linux-2.6.34-rc5/drivers/net/pcmcia/smc91c92_cs.c 2010-04-24 07:42:44.000000000 +0900
@@ -1804,23 +1804,30 @@ static void media_check(u_long arg)
SMC_SELECT_BANK(1);
media |= (inw(ioaddr + CONFIG) & CFG_AUI_SELECT) ? 2 : 1;
+ SMC_SELECT_BANK(saved_bank);
+ spin_unlock_irqrestore(&smc->lock, flags);
+
/* Check for pending interrupt with watchdog flag set: with
this, we can limp along even if the interrupt is blocked */
if (smc->watchdog++ && ((i>>8) & i)) {
if (!smc->fast_poll)
printk(KERN_INFO "%s: interrupt(s) dropped!\n", dev->name);
+ local_irq_save(flags);
smc_interrupt(dev->irq, dev);
+ local_irq_restore(flags);
smc->fast_poll = HZ;
}
if (smc->fast_poll) {
smc->fast_poll--;
smc->media.expires = jiffies + HZ/100;
add_timer(&smc->media);
- SMC_SELECT_BANK(saved_bank);
- spin_unlock_irqrestore(&smc->lock, flags);
return;
}
+ spin_lock_irqsave(&smc->lock, flags);
+
+ saved_bank = inw(ioaddr + BANK_SELECT);
+
if (smc->cfg & CFG_MII_SELECT) {
if (smc->mii_if.phy_id < 0)
goto reschedule;
@@ -1978,15 +1985,16 @@ static int smc_get_settings(struct net_d
unsigned int ioaddr = dev->base_addr;
u16 saved_bank = inw(ioaddr + BANK_SELECT);
int ret;
+ unsigned long flags;
- spin_lock_irq(&smc->lock);
+ spin_lock_irqsave(&smc->lock, flags);
SMC_SELECT_BANK(3);
if (smc->cfg & CFG_MII_SELECT)
ret = mii_ethtool_gset(&smc->mii_if, ecmd);
else
ret = smc_netdev_get_ecmd(dev, ecmd);
SMC_SELECT_BANK(saved_bank);
- spin_unlock_irq(&smc->lock);
+ spin_unlock_irqrestore(&smc->lock, flags);
return ret;
}
@@ -1996,15 +2004,16 @@ static int smc_set_settings(struct net_d
unsigned int ioaddr = dev->base_addr;
u16 saved_bank = inw(ioaddr + BANK_SELECT);
int ret;
+ unsigned long flags;
- spin_lock_irq(&smc->lock);
+ spin_lock_irqsave(&smc->lock, flags);
SMC_SELECT_BANK(3);
if (smc->cfg & CFG_MII_SELECT)
ret = mii_ethtool_sset(&smc->mii_if, ecmd);
else
ret = smc_netdev_set_ecmd(dev, ecmd);
SMC_SELECT_BANK(saved_bank);
- spin_unlock_irq(&smc->lock);
+ spin_unlock_irqrestore(&smc->lock, flags);
return ret;
}
@@ -2014,12 +2023,13 @@ static u32 smc_get_link(struct net_devic
unsigned int ioaddr = dev->base_addr;
u16 saved_bank = inw(ioaddr + BANK_SELECT);
u32 ret;
+ unsigned long flags;
- spin_lock_irq(&smc->lock);
+ spin_lock_irqsave(&smc->lock, flags);
SMC_SELECT_BANK(3);
ret = smc_link_ok(dev);
SMC_SELECT_BANK(saved_bank);
- spin_unlock_irq(&smc->lock);
+ spin_unlock_irqrestore(&smc->lock, flags);
return ret;
}
@@ -2056,16 +2066,17 @@ static int smc_ioctl (struct net_device
int rc = 0;
u16 saved_bank;
unsigned int ioaddr = dev->base_addr;
+ unsigned long flags;
if (!netif_running(dev))
return -EINVAL;
- spin_lock_irq(&smc->lock);
+ spin_lock_irqsave(&smc->lock, flags);
saved_bank = inw(ioaddr + BANK_SELECT);
SMC_SELECT_BANK(3);
rc = generic_mii_ioctl(&smc->mii_if, mii, cmd, NULL);
SMC_SELECT_BANK(saved_bank);
- spin_unlock_irq(&smc->lock);
+ spin_unlock_irqrestore(&smc->lock, flags);
return rc;
}
^ permalink raw reply
* Re: DDoS attack causing bad effect on conntrack searches
From: Eric Dumazet @ 2010-04-24 20:11 UTC (permalink / raw)
To: Jesper Dangaard Brouer
Cc: paulmck, Patrick McHardy, Changli Gao, hawk,
Linux Kernel Network Hackers, Netfilter Developers
In-Reply-To: <Pine.LNX.4.64.1004241219280.32071@ask.diku.dk>
Le samedi 24 avril 2010 à 13:11 +0200, Jesper Dangaard Brouer a écrit :
> On Fri, 23 Apr 2010, Eric Dumazet wrote:
>
> > Le jeudi 22 avril 2010 à 22:38 +0200, Jesper Dangaard Brouer a écrit :
> >
> >>
> >> I think its plausable, there is a lot of modification going on.
> >> Approx 40.000 deletes/sec and 40.000 inserts/sec.
> >> The hash bucket size is 300032, and with 80000 modifications/sec, we are
> >> (potentially) changing 26.6% of the hash chains each second.
> >>
> >> As can be seen from the graphs:
> >> http://people.netfilter.org/hawk/DDoS/2010-04-12__001/list.html
> >>
> >> Notice that primarily CPU2 is doing the 40k deletes/sec, while CPU1 is
> >> caught searching...
> >>
> >>
> >>> maybe hash table has one slot :)
> >>
> >> Guess I have to reproduce the DoS attack in a testlab (I will first have
> >> time Tuesday). So we can determine if its bad hashing or restart of the
> >> search loop.
> >>
> >>
> >> The traffic pattern was fairly simple:
> >>
> >> 200 bytes UDP packets, comming from approx 60 source IPs, going to one
> >> destination IP. The UDP destination port number was varied in the range
> >> of 1 to 6000. The source UDP port was varied a bit more, some ranging
> >> from 32768 to 61000, and some from 1028 to 5000.
> >>
> >>
> >
> > Re-reading this, I am not sure there is a real problem on RCU as you
> > pointed out.
> >
> > With 800.000 entries, in a 300.032 buckets hash table, each lookup hit
> > about 3 entries (aka searches in conntrack stats)
> >
> > 300.000 packets/second -> 900.000 'searches' per second.
>
> The machine is not getting 300.000 pps, its only getting 40.000 pps (the
> rest is stopped by the NIC by sending Ethernet flowcontrol pause frames)
>
> http://people.netfilter.org/hawk/DDoS/2010-04-12__001/eth0-rx.png
>
> We are doing 700.000 'searches' per second, with 40.000 pps, thus on
> average the list lenght (in each hash bucket) just need to be 17.5
> elements. Is this an acceptable has distribution, with 900.000 elements
> in a 300.032 buckets hash table?
>
>
> > If you have four cpus all trying to insert/delete entries in //, they
> > all hit the central conntrack lock.
>
> This machine only have two CPUs, or rather one physical CPU and one
> hyperthreaded. The server is a old HP380 G4, with an old Xeon type CPU
> 3.4 GHz (1MB cache). If remember correctly its based on Pentium-4
> technologi, which had a pretty bad hyperthreading.
>
>
> > On a DDOS scenario, every packet needs to take this lock twice,
> > once to free an old conntrack (early drop), once to insert a new entry.
>
> I was worried about if the "early drop" e.g. free an old conntrack would
> disturbe the conntrack searching?
>
>
> > To scale this, only way would be to have an array of locks, like we have
> > for TCP/UDP hash tables.
> >
> > I did some tests here, with a multiqueue card, flooded with 300.000
> > pack/second, 65.536 source IP, millions of flows, and nothing wrong
> > happened (but packets drops, of course)
>
> A small hint when testing, use Haralds tool 'lnstat' to see the stats on
> the command line, thus you don't need to RRDtool graphe every thing:
>
> Command:
> lnstat -f nf_conntrack -i 1 -c 1000
>
> I don't have a multiqueue NIC in this old machine.
>
> I also ran some tests on my 10G testlab, but it didn't go wrong.
> Tweeking the pktgen DDoS I could get the system to do 4.500.000 'searches'
> per sec with a 1.500.000 packets/sec. (Have not reloaded the kernel with
> the new failed lookup stats). Guess my 10G machines are too fast to hit
> the issues.
>
>
> > My two cpus were busy 100%, after tweaking smp_affinities, because on
> > first try, irqbalance put "01" mask on both queues, so only one ksoftirq
> > was working, other cpu was idle :(
>
> Think my machine is some what slower than yours, perhaps its simply not
> fast enough for this kind of workload (pretty sure that the cache is the
> CPU is getting f*ked in this case).
>
> On my machine one CPU in stuck in softirq:
> http://people.netfilter.org/hawk/DDoS/2010-04-12__001/cpu_softirq001.png
>
> And another observation is that the CPUs are disturbing each other on the
> RX softirq code path.
> http://people.netfilter.org/hawk/DDoS/2010-04-12__001/softnet_time_squeeze_rx-softirq001.png
> (/proc/net/softnet_stat column 3)
>
> Monday or Tuesdag I'll do a test setup with some old HP380 G4 machines to
> see if I can reproduce the DDoS attack senario. And see if I can get
> it into to lookup loop.
Theorically a loop is very unlikely, given a single retry is very
unlikly too.
Unless a cpu gets in its cache a corrupted value of a 'next' pointer.
Maybe a hardware problem ?
My test machine is a fairly low end one, an AMD Athlon Dual core 5050e,
2.6 GHz
I used an igb card for ease of setup, and to make sure my two cores
would handle packets in parallel, without RPS.
With same hash bucket size (300.032) and max conntracks (800.000), and
after more than 10 hours of test, not a single lookup was restarted
because of a nulls with wrong value.
I can setup a test on a 16 cpu machine, multiqueue card too.
Hmm, I forgot to say I am using net-next-2.6, not your kernel version...
--
To unsubscribe from this list: send the line "unsubscribe netfilter-devel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [RFC][PATCH v3 2/3] Provides multiple submits and asynchronous notifications.
From: Michael S. Tsirkin @ 2010-04-24 19:32 UTC (permalink / raw)
To: xiaohui.xin; +Cc: arnd, netdev, kvm, linux-kernel, mingo, davem, jdike
In-Reply-To: <1272006513-5188-1-git-send-email-xiaohui.xin@intel.com>
On Fri, Apr 23, 2010 at 03:08:33PM +0800, xiaohui.xin@intel.com wrote:
> From: Xin Xiaohui <xiaohui.xin@intel.com>
>
> The vhost-net backend now only supports synchronous send/recv
> operations. The patch provides multiple submits and asynchronous
> notifications. This is needed for zero-copy case.
>
> Signed-off-by: Xin Xiaohui <xiaohui.xin@intel.com>
> ---
>
> Michael,
> >>>Can't vhost supply a kiocb completion callback that will handle the list?
> >>Yes, thanks. And with it I also remove the vq->receivr finally.
> >>Thanks
> >>Xiaohui
>
> >Nice progress. I commented on some minor issues below.
> >Thanks!
>
> The updated patch addressed your comments on the minor issues.
> Thanks!
>
> Thanks
> Xiaohui
>
> drivers/vhost/net.c | 236 +++++++++++++++++++++++++++++++++++++++++++++++-
> drivers/vhost/vhost.c | 120 ++++++++++++++-----------
> drivers/vhost/vhost.h | 14 +++
> 3 files changed, 314 insertions(+), 56 deletions(-)
>
> diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
> index 38989d1..18f6c41 100644
> --- a/drivers/vhost/net.c
> +++ b/drivers/vhost/net.c
> @@ -23,6 +23,8 @@
> #include <linux/if_arp.h>
> #include <linux/if_tun.h>
> #include <linux/if_macvlan.h>
> +#include <linux/mpassthru.h>
> +#include <linux/aio.h>
>
> #include <net/sock.h>
>
> @@ -48,6 +50,7 @@ struct vhost_net {
> struct vhost_dev dev;
> struct vhost_virtqueue vqs[VHOST_NET_VQ_MAX];
> struct vhost_poll poll[VHOST_NET_VQ_MAX];
> + struct kmem_cache *cache;
> /* Tells us whether we are polling a socket for TX.
> * We only do this when socket buffer fills up.
> * Protected by tx vq lock. */
> @@ -92,11 +95,138 @@ static void tx_poll_start(struct vhost_net *net, struct socket *sock)
> net->tx_poll_state = VHOST_NET_POLL_STARTED;
> }
>
> +struct kiocb *notify_dequeue(struct vhost_virtqueue *vq)
> +{
> + struct kiocb *iocb = NULL;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&vq->notify_lock, flags);
> + if (!list_empty(&vq->notifier)) {
> + iocb = list_first_entry(&vq->notifier,
> + struct kiocb, ki_list);
> + list_del(&iocb->ki_list);
> + }
> + spin_unlock_irqrestore(&vq->notify_lock, flags);
> + return iocb;
> +}
> +
> +static void handle_iocb(struct kiocb *iocb)
> +{
> + struct vhost_virtqueue *vq = iocb->private;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&vq->notify_lock, flags);
> + list_add_tail(&iocb->ki_list, &vq->notifier);
> + spin_unlock_irqrestore(&vq->notify_lock, flags);
Don't we need to wake up the wq as well?
> +}
> +
> +static int is_async_vq(struct vhost_virtqueue *vq)
> +{
> + return (vq->link_state == VHOST_VQ_LINK_ASYNC);
() not needed
> +}
> +
> +static void handle_async_rx_events_notify(struct vhost_net *net,
> + struct vhost_virtqueue *vq,
> + struct socket *sock)
> +{
> + struct kiocb *iocb = NULL;
> + struct vhost_log *vq_log = NULL;
> + int rx_total_len = 0;
> + unsigned int head, log, in, out;
> + int size;
> +
> + if (!is_async_vq(vq))
> + return;
> +
> + if (sock->sk->sk_data_ready)
> + sock->sk->sk_data_ready(sock->sk, 0);
> +
> + vq_log = unlikely(vhost_has_feature(&net->dev, VHOST_F_LOG_ALL)) ?
> + vq->log : NULL;
> +
> + while ((iocb = notify_dequeue(vq)) != NULL) {
> + vhost_add_used_and_signal(&net->dev, vq,
> + iocb->ki_pos, iocb->ki_nbytes);
> + size = iocb->ki_nbytes;
> + head = iocb->ki_pos;
> + rx_total_len += iocb->ki_nbytes;
> +
> + if (iocb->ki_dtor)
> + iocb->ki_dtor(iocb);
I am confused by the above. Isn't ki_dtor handle_iocb?
Why is it called here?
> + kmem_cache_free(net->cache, iocb);
> +
> + /* when log is enabled, recomputing the log info is needed,
> + * since these buffers are in async queue, and may not get
> + * the log info before.
> + */
> + if (unlikely(vq_log)) {
> + if (!log)
log is uninitialized now?
> + __vhost_get_vq_desc(&net->dev, vq, vq->iov,
> + ARRAY_SIZE(vq->iov),
> + &out, &in, vq_log,
> + &log, head);
> + vhost_log_write(vq, vq_log, log, size);
> + }
> + if (unlikely(rx_total_len >= VHOST_NET_WEIGHT)) {
> + vhost_poll_queue(&vq->poll);
> + break;
> + }
> + }
> +}
> +
> +static void handle_async_tx_events_notify(struct vhost_net *net,
> + struct vhost_virtqueue *vq)
> +{
> + struct kiocb *iocb = NULL;
> + int tx_total_len = 0;
> +
> + if (!is_async_vq(vq))
> + return;
> +
> + while ((iocb = notify_dequeue(vq)) != NULL) {
Please just write this as while (((iocb = notify_dequeue(vq)))
above as well
> + vhost_add_used_and_signal(&net->dev, vq,
> + iocb->ki_pos, 0);
pls indent continuation lines to the roght of (
above as well
> + tx_total_len += iocb->ki_nbytes;
> +
> + if (iocb->ki_dtor)
> + iocb->ki_dtor(iocb);
same question as above
> +
> + kmem_cache_free(net->cache, iocb);
> + if (unlikely(tx_total_len >= VHOST_NET_WEIGHT)) {
> + vhost_poll_queue(&vq->poll);
> + break;
> + }
> + }
> +}
> +
> +static struct kiocb *create_iocb(struct vhost_net *net,
> + struct vhost_virtqueue *vq,
> + unsigned head)
> +{
> + struct kiocb *iocb = NULL;
> +
> + if (!is_async_vq(vq))
> + return NULL;
> +
> + iocb = kmem_cache_zalloc(net->cache, GFP_KERNEL);
> + if (!iocb)
> + return NULL;
> + iocb->private = vq;
> + iocb->ki_pos = head;
> + iocb->ki_dtor = handle_iocb;
So, dtor calls handle_iocb, but what causes vhost
to wake-up is really poll, right?
> + if (vq == &net->dev.vqs[VHOST_NET_VQ_RX]) {
> + iocb->ki_user_data = vq->num;
Is the above used?
> + iocb->ki_iovec = vq->hdr;
> + }
> + return iocb;
> +}
> +
> /* Expects to be always run from workqueue - which acts as
> * read-size critical section for our kind of RCU. */
> static void handle_tx(struct vhost_net *net)
> {
> struct vhost_virtqueue *vq = &net->dev.vqs[VHOST_NET_VQ_TX];
> + struct kiocb *iocb = NULL;
Why do we need to init iocb to NULL?
> unsigned head, out, in, s;
> struct msghdr msg = {
> .msg_name = NULL,
> @@ -129,6 +259,8 @@ static void handle_tx(struct vhost_net *net)
> tx_poll_stop(net);
> hdr_size = vq->hdr_size;
>
> + handle_async_tx_events_notify(net, vq);
> +
> for (;;) {
> head = vhost_get_vq_desc(&net->dev, vq, vq->iov,
> ARRAY_SIZE(vq->iov),
> @@ -156,6 +288,13 @@ static void handle_tx(struct vhost_net *net)
> /* Skip header. TODO: support TSO. */
> s = move_iovec_hdr(vq->iov, vq->hdr, hdr_size, out);
> msg.msg_iovlen = out;
> +
> + if (is_async_vq(vq)) {
> + iocb = create_iocb(net, vq, head);
> + if (!iocb)
> + break;
> + }
> +
> len = iov_length(vq->iov, out);
> /* Sanity check */
> if (!len) {
> @@ -165,12 +304,18 @@ static void handle_tx(struct vhost_net *net)
> break;
> }
> /* TODO: Check specific error and bomb out unless ENOBUFS? */
> - err = sock->ops->sendmsg(NULL, sock, &msg, len);
> + err = sock->ops->sendmsg(iocb, sock, &msg, len);
> if (unlikely(err < 0)) {
> + if (is_async_vq(vq))
> + kmem_cache_free(net->cache, iocb);
> vhost_discard_vq_desc(vq);
> tx_poll_start(net, sock);
> break;
> }
> +
> + if (is_async_vq(vq))
> + continue;
> +
> if (err != len)
> pr_err("Truncated TX packet: "
> " len %d != %zd\n", err, len);
> @@ -182,6 +327,8 @@ static void handle_tx(struct vhost_net *net)
> }
> }
>
> + handle_async_tx_events_notify(net, vq);
> +
> mutex_unlock(&vq->mutex);
> unuse_mm(net->dev.mm);
> }
> @@ -191,6 +338,7 @@ static void handle_tx(struct vhost_net *net)
> static void handle_rx(struct vhost_net *net)
> {
> struct vhost_virtqueue *vq = &net->dev.vqs[VHOST_NET_VQ_RX];
> + struct kiocb *iocb = NULL;
> unsigned head, out, in, log, s;
> struct vhost_log *vq_log;
> struct msghdr msg = {
> @@ -211,7 +359,8 @@ static void handle_rx(struct vhost_net *net)
> int err;
> size_t hdr_size;
> struct socket *sock = rcu_dereference(vq->private_data);
> - if (!sock || skb_queue_empty(&sock->sk->sk_receive_queue))
> + if (!sock || (skb_queue_empty(&sock->sk->sk_receive_queue) &&
> + vq->link_state == VHOST_VQ_LINK_SYNC))
> return;
>
> use_mm(net->dev.mm);
> @@ -219,9 +368,17 @@ static void handle_rx(struct vhost_net *net)
> vhost_disable_notify(vq);
> hdr_size = vq->hdr_size;
>
> + /* In async cases, when write log is enabled, in case the submitted
> + * buffers did not get log info before the log enabling, so we'd
> + * better recompute the log info when needed. We do this in
> + * handle_async_rx_events_notify().
> + */
> +
> vq_log = unlikely(vhost_has_feature(&net->dev, VHOST_F_LOG_ALL)) ?
> vq->log : NULL;
>
> + handle_async_rx_events_notify(net, vq, sock);
> +
> for (;;) {
> head = vhost_get_vq_desc(&net->dev, vq, vq->iov,
> ARRAY_SIZE(vq->iov),
> @@ -250,6 +407,13 @@ static void handle_rx(struct vhost_net *net)
> s = move_iovec_hdr(vq->iov, vq->hdr, hdr_size, in);
> msg.msg_iovlen = in;
> len = iov_length(vq->iov, in);
> +
> + if (is_async_vq(vq)) {
> + iocb = create_iocb(net, vq, head);
> + if (!iocb)
> + break;
> + }
> +
> /* Sanity check */
> if (!len) {
> vq_err(vq, "Unexpected header len for RX: "
> @@ -257,13 +421,20 @@ static void handle_rx(struct vhost_net *net)
> iov_length(vq->hdr, s), hdr_size);
> break;
> }
> - err = sock->ops->recvmsg(NULL, sock, &msg,
> +
> + err = sock->ops->recvmsg(iocb, sock, &msg,
> len, MSG_DONTWAIT | MSG_TRUNC);
> /* TODO: Check specific error and bomb out unless EAGAIN? */
> if (err < 0) {
> + if (is_async_vq(vq))
> + kmem_cache_free(net->cache, iocb);
> vhost_discard_vq_desc(vq);
> break;
> }
> +
> + if (is_async_vq(vq))
> + continue;
> +
> /* TODO: Should check and handle checksum. */
> if (err > len) {
> pr_err("Discarded truncated rx packet: "
> @@ -289,6 +460,8 @@ static void handle_rx(struct vhost_net *net)
> }
> }
>
> + handle_async_rx_events_notify(net, vq, sock);
> +
> mutex_unlock(&vq->mutex);
> unuse_mm(net->dev.mm);
> }
> @@ -342,6 +515,7 @@ static int vhost_net_open(struct inode *inode, struct file *f)
> vhost_poll_init(n->poll + VHOST_NET_VQ_TX, handle_tx_net, POLLOUT);
> vhost_poll_init(n->poll + VHOST_NET_VQ_RX, handle_rx_net, POLLIN);
> n->tx_poll_state = VHOST_NET_POLL_DISABLED;
> + n->cache = NULL;
>
> f->private_data = n;
>
> @@ -405,6 +579,18 @@ static void vhost_net_flush(struct vhost_net *n)
> vhost_net_flush_vq(n, VHOST_NET_VQ_RX);
> }
>
> +static void vhost_async_cleanup(struct vhost_net *n)
> +{
> + /* clean the notifier */
> + struct vhost_virtqueue *vq = &n->dev.vqs[VHOST_NET_VQ_RX];
> + struct kiocb *iocb = NULL;
> + if (n->cache) {
> + while ((iocb = notify_dequeue(vq)) != NULL)
> + kmem_cache_free(n->cache, iocb);
> + kmem_cache_destroy(n->cache);
> + }
> +}
> +
> static int vhost_net_release(struct inode *inode, struct file *f)
> {
> struct vhost_net *n = f->private_data;
> @@ -421,6 +607,7 @@ static int vhost_net_release(struct inode *inode, struct file *f)
> /* We do an extra flush before freeing memory,
> * since jobs can re-queue themselves. */
> vhost_net_flush(n);
> + vhost_async_cleanup(n);
> kfree(n);
> return 0;
> }
> @@ -472,21 +659,58 @@ static struct socket *get_tap_socket(int fd)
> return sock;
> }
>
> -static struct socket *get_socket(int fd)
> +static struct socket *get_mp_socket(int fd)
> +{
> + struct file *file = fget(fd);
> + struct socket *sock;
> + if (!file)
> + return ERR_PTR(-EBADF);
> + sock = mp_get_socket(file);
> + if (IS_ERR(sock))
> + fput(file);
> + return sock;
> +}
> +
> +static struct socket *get_socket(struct vhost_virtqueue *vq, int fd,
> + enum vhost_vq_link_state *state)
> {
> struct socket *sock;
> /* special case to disable backend */
> if (fd == -1)
> return NULL;
> +
> + *state = VHOST_VQ_LINK_SYNC;
> +
> sock = get_raw_socket(fd);
> if (!IS_ERR(sock))
> return sock;
> sock = get_tap_socket(fd);
> if (!IS_ERR(sock))
> return sock;
> + sock = get_mp_socket(fd);
> + if (!IS_ERR(sock)) {
> + *state = VHOST_VQ_LINK_ASYNC;
> + return sock;
> + }
> return ERR_PTR(-ENOTSOCK);
> }
>
> +static void vhost_init_link_state(struct vhost_net *n, int index)
so let's pass link state as parameter, and set it in this function.
And maybe pass in vq, no need for index tricks.
> +{
> + struct vhost_virtqueue *vq = n->vqs + index;
> +
> + WARN_ON(!mutex_is_locked(&vq->mutex));
there's a single place of call, I don't think we need this check.
> + if (vq->link_state == VHOST_VQ_LINK_ASYNC) {
> + INIT_LIST_HEAD(&vq->notifier);
> + spin_lock_init(&vq->notify_lock);
> + if (!n->cache) {
> + n->cache = kmem_cache_create("vhost_kiocb",
vhost_net_kiocb a better name
> + sizeof(struct kiocb), 0,
> + SLAB_HWCACHE_ALIGN, NULL);
> + }
no need for {} for single statement if.
> + }
> +}
> +
> static long vhost_net_set_backend(struct vhost_net *n, unsigned index, int fd)
> {
> struct socket *sock, *oldsock;
> @@ -510,12 +734,14 @@ static long vhost_net_set_backend(struct vhost_net *n, unsigned index, int fd)
> r = -EFAULT;
> goto err_vq;
> }
> - sock = get_socket(fd);
> + sock = get_socket(vq, fd, &vq->link_state);
> if (IS_ERR(sock)) {
> r = PTR_ERR(sock);
> goto err_vq;
> }
>
> + vhost_init_link_state(n, index);
> +
> /* start polling new socket */
> oldsock = vq->private_data;
> if (sock == oldsock)
> diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
> index 3f10194..add77d3 100644
> --- a/drivers/vhost/vhost.c
> +++ b/drivers/vhost/vhost.c
> @@ -860,61 +860,17 @@ static unsigned get_indirect(struct vhost_dev *dev, struct vhost_virtqueue *vq,
> return 0;
> }
>
> -/* This looks in the virtqueue and for the first available buffer, and converts
> - * it to an iovec for convenient access. Since descriptors consist of some
> - * number of output then some number of input descriptors, it's actually two
> - * iovecs, but we pack them into one and note how many of each there were.
> - *
> - * This function returns the descriptor number found, or vq->num (which
> - * is never a valid descriptor number) if none was found. */
> -unsigned vhost_get_vq_desc(struct vhost_dev *dev, struct vhost_virtqueue *vq,
> - struct iovec iov[], unsigned int iov_size,
> - unsigned int *out_num, unsigned int *in_num,
> - struct vhost_log *log, unsigned int *log_num)
> +/* This computes the log info according to the index of buffer */
> +unsigned __vhost_get_vq_desc(struct vhost_dev *dev, struct vhost_virtqueue *vq,
> + struct iovec iov[], unsigned int iov_size,
> + unsigned int *out_num, unsigned int *in_num,
> + struct vhost_log *log, unsigned int *log_num,
> + unsigned int head)
> {
> struct vring_desc desc;
> unsigned int i, head, found = 0;
> - u16 last_avail_idx;
> - int ret;
> -
> - /* Check it isn't doing very strange things with descriptor numbers. */
> - last_avail_idx = vq->last_avail_idx;
> - if (get_user(vq->avail_idx, &vq->avail->idx)) {
> - vq_err(vq, "Failed to access avail idx at %p\n",
> - &vq->avail->idx);
> - return vq->num;
> - }
> -
> - if ((u16)(vq->avail_idx - last_avail_idx) > vq->num) {
> - vq_err(vq, "Guest moved used index from %u to %u",
> - last_avail_idx, vq->avail_idx);
> - return vq->num;
> - }
> -
> - /* If there's nothing new since last we looked, return invalid. */
> - if (vq->avail_idx == last_avail_idx)
> - return vq->num;
> + unsigned int ret;
>
> - /* Only get avail ring entries after they have been exposed by guest. */
> - smp_rmb();
> -
> - /* Grab the next descriptor number they're advertising, and increment
> - * the index we've seen. */
> - if (get_user(head, &vq->avail->ring[last_avail_idx % vq->num])) {
> - vq_err(vq, "Failed to read head: idx %d address %p\n",
> - last_avail_idx,
> - &vq->avail->ring[last_avail_idx % vq->num]);
> - return vq->num;
> - }
> -
> - /* If their number is silly, that's an error. */
> - if (head >= vq->num) {
> - vq_err(vq, "Guest says index %u > %u is available",
> - head, vq->num);
> - return vq->num;
> - }
> -
> - /* When we start there are none of either input nor output. */
> *out_num = *in_num = 0;
> if (unlikely(log))
> *log_num = 0;
> @@ -978,8 +934,70 @@ unsigned vhost_get_vq_desc(struct vhost_dev *dev, struct vhost_virtqueue *vq,
> *out_num += ret;
> }
> } while ((i = next_desc(&desc)) != -1);
> + return head;
> +}
> +
> +/* This looks in the virtqueue and for the first available buffer, and converts
> + * it to an iovec for convenient access. Since descriptors consist of some
> + * number of output then some number of input descriptors, it's actually two
> + * iovecs, but we pack them into one and note how many of each there were.
> + *
> + * This function returns the descriptor number found, or vq->num (which
> + * is never a valid descriptor number) if none was found. */
> +unsigned vhost_get_vq_desc(struct vhost_dev *dev, struct vhost_virtqueue *vq,
> + struct iovec iov[], unsigned int iov_size,
> + unsigned int *out_num, unsigned int *in_num,
> + struct vhost_log *log, unsigned int *log_num)
> +{
> + struct vring_desc desc;
> + unsigned int i, head, found = 0;
> + u16 last_avail_idx;
> + unsigned int ret;
> +
> + /* Check it isn't doing very strange things with descriptor numbers. */
> + last_avail_idx = vq->last_avail_idx;
> + if (get_user(vq->avail_idx, &vq->avail->idx)) {
> + vq_err(vq, "Failed to access avail idx at %p\n",
> + &vq->avail->idx);
> + return vq->num;
> + }
> +
> + if ((u16)(vq->avail_idx - last_avail_idx) > vq->num) {
> + vq_err(vq, "Guest moved used index from %u to %u",
> + last_avail_idx, vq->avail_idx);
> + return vq->num;
> + }
> +
> + /* If there's nothing new since last we looked, return invalid. */
> + if (vq->avail_idx == last_avail_idx)
> + return vq->num;
> +
> + /* Only get avail ring entries after they have been exposed by guest. */
> + rmb();
> +
> + /* Grab the next descriptor number they're advertising, and increment
> + * the index we've seen. */
> + if (get_user(head, &vq->avail->ring[last_avail_idx % vq->num])) {
> + vq_err(vq, "Failed to read head: idx %d address %p\n",
> + last_avail_idx,
> + &vq->avail->ring[last_avail_idx % vq->num]);
> + return vq->num;
> + }
> +
> + /* If their number is silly, that's an error. */
> + if (head >= vq->num) {
> + vq_err(vq, "Guest says index %u > %u is available",
> + head, vq->num);
> + return vq->num;
> + }
> +
> + ret = __vhost_get_vq_desc(dev, vq, iov, iov_size,
> + out_num, in_num,
> + log, log_num, head);
>
> /* On success, increment avail index. */
> + if (ret == vq->num)
> + return ret;
> vq->last_avail_idx++;
> return head;
> }
> diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
> index 44591ba..3c9cbce 100644
> --- a/drivers/vhost/vhost.h
> +++ b/drivers/vhost/vhost.h
> @@ -43,6 +43,11 @@ struct vhost_log {
> u64 len;
> };
>
> +enum vhost_vq_link_state {
> + VHOST_VQ_LINK_SYNC = 0,
> + VHOST_VQ_LINK_ASYNC = 1,
> +};
> +
> /* The virtqueue structure describes a queue attached to a device. */
> struct vhost_virtqueue {
> struct vhost_dev *dev;
> @@ -96,6 +101,10 @@ struct vhost_virtqueue {
> /* Log write descriptors */
> void __user *log_base;
> struct vhost_log log[VHOST_NET_MAX_SG];
> + /* Differiate async socket for 0-copy from normal */
> + enum vhost_vq_link_state link_state;
> + struct list_head notifier;
> + spinlock_t notify_lock;
> };
>
> struct vhost_dev {
> @@ -124,6 +133,11 @@ unsigned vhost_get_vq_desc(struct vhost_dev *, struct vhost_virtqueue *,
> struct iovec iov[], unsigned int iov_count,
> unsigned int *out_num, unsigned int *in_num,
> struct vhost_log *log, unsigned int *log_num);
> +unsigned __vhost_get_vq_desc(struct vhost_dev *, struct vhost_virtqueue *,
> + struct iovec iov[], unsigned int iov_count,
> + unsigned int *out_num, unsigned int *in_num,
> + struct vhost_log *log, unsigned int *log_num,
> + unsigned int head);
> void vhost_discard_vq_desc(struct vhost_virtqueue *);
>
> int vhost_add_used(struct vhost_virtqueue *, unsigned int head, int len);
> --
> 1.5.4.4
^ permalink raw reply
* Re: [PATCHv5] add mergeable receiver buffers support to vhost
From: Michael S. Tsirkin @ 2010-04-24 19:07 UTC (permalink / raw)
To: David L Stevens; +Cc: rusty, kvm, virtualization, netdev
In-Reply-To: <1272053205.3114.3.camel@lab1.dls>
On Fri, Apr 23, 2010 at 01:06:45PM -0700, David L Stevens wrote:
> This patch adds mergeable receive buffers support to vhost.
>
> Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
It seems the logging is wrong. Did you test live migration? Please do.
I think reason for the bug could be you did some cut and paste
from code that was there before 86e9424d7252bae5ad1c17b4b8088193e6b27cbe.
So I put a suggestion on reducing this duplication a bit, below.
Also, I think this patch adds sparse errors: some __user annotations
seem missing. Could you please make your patch apply
on top of patch 'vhost: fix sparse warnings' from
Christoph Hellwig, and then make sure your patch
does not add new sparse errors?
I also wanted to make some coding style tweaks, to make
patch match the style of the rest of the code, I could do
them myself but since there's these issues, and we need another
round, I put them in comments in mail below.
Thanks!
> diff -ruNp net-next-v0/drivers/vhost/net.c net-next-v5/drivers/vhost/net.c
> --- net-next-v0/drivers/vhost/net.c 2010-04-22 11:31:57.000000000 -0700
> +++ net-next-v5/drivers/vhost/net.c 2010-04-22 12:41:17.000000000 -0700
> @@ -109,7 +109,7 @@ static void handle_tx(struct vhost_net *
> };
> size_t len, total_len = 0;
> int err, wmem;
> - size_t hdr_size;
> + size_t vhost_hlen;
> struct socket *sock = rcu_dereference(vq->private_data);
> if (!sock)
> return;
> @@ -128,13 +128,13 @@ static void handle_tx(struct vhost_net *
>
> if (wmem < sock->sk->sk_sndbuf / 2)
> tx_poll_stop(net);
> - hdr_size = vq->hdr_size;
> + vhost_hlen = vq->vhost_hlen;
>
> for (;;) {
> - head = vhost_get_vq_desc(&net->dev, vq, vq->iov,
> - ARRAY_SIZE(vq->iov),
> - &out, &in,
> - NULL, NULL);
> + head = vhost_get_desc(&net->dev, vq, vq->iov,
> + ARRAY_SIZE(vq->iov),
> + &out, &in,
> + NULL, NULL);
> /* Nothing new? Wait for eventfd to tell us they refilled. */
> if (head == vq->num) {
> wmem = atomic_read(&sock->sk->sk_wmem_alloc);
> @@ -155,20 +155,20 @@ static void handle_tx(struct vhost_net *
> break;
> }
> /* Skip header. TODO: support TSO. */
> - s = move_iovec_hdr(vq->iov, vq->hdr, hdr_size, out);
> + s = move_iovec_hdr(vq->iov, vq->hdr, vhost_hlen, out);
> msg.msg_iovlen = out;
> len = iov_length(vq->iov, out);
> /* Sanity check */
> if (!len) {
> vq_err(vq, "Unexpected header len for TX: "
> "%zd expected %zd\n",
> - iov_length(vq->hdr, s), hdr_size);
> + iov_length(vq->hdr, s), vhost_hlen);
> break;
> }
> /* TODO: Check specific error and bomb out unless ENOBUFS? */
> err = sock->ops->sendmsg(NULL, sock, &msg, len);
> if (unlikely(err < 0)) {
> - vhost_discard_vq_desc(vq);
> + vhost_discard_desc(vq, 1);
> tx_poll_start(net, sock);
> break;
> }
> @@ -187,12 +187,25 @@ static void handle_tx(struct vhost_net *
> unuse_mm(net->dev.mm);
> }
>
> +static int vhost_head_len(struct vhost_virtqueue *vq, struct sock *sk)
> +{
> + struct sk_buff *head;
> + int len = 0;
> +
> + lock_sock(sk);
> + head = skb_peek(&sk->sk_receive_queue);
> + if (head)
> + len = head->len + vq->sock_hlen;
> + release_sock(sk);
> + return len;
> +}
> +
> /* Expects to be always run from workqueue - which acts as
> * read-size critical section for our kind of RCU. */
> static void handle_rx(struct vhost_net *net)
> {
> struct vhost_virtqueue *vq = &net->dev.vqs[VHOST_NET_VQ_RX];
> - unsigned head, out, in, log, s;
> + unsigned in, log, s;
> struct vhost_log *vq_log;
> struct msghdr msg = {
> .msg_name = NULL,
> @@ -203,14 +216,14 @@ static void handle_rx(struct vhost_net *
> .msg_flags = MSG_DONTWAIT,
> };
>
> - struct virtio_net_hdr hdr = {
> - .flags = 0,
> - .gso_type = VIRTIO_NET_HDR_GSO_NONE
> + struct virtio_net_hdr_mrg_rxbuf hdr = {
> + .hdr.flags = 0,
> + .hdr.gso_type = VIRTIO_NET_HDR_GSO_NONE
> };
>
> size_t len, total_len = 0;
> - int err;
> - size_t hdr_size;
> + int err, headcount, datalen;
> + size_t vhost_hlen;
> struct socket *sock = rcu_dereference(vq->private_data);
> if (!sock || skb_queue_empty(&sock->sk->sk_receive_queue))
> return;
> @@ -218,18 +231,18 @@ static void handle_rx(struct vhost_net *
> use_mm(net->dev.mm);
> mutex_lock(&vq->mutex);
> vhost_disable_notify(vq);
> - hdr_size = vq->hdr_size;
> + vhost_hlen = vq->vhost_hlen;
>
> vq_log = unlikely(vhost_has_feature(&net->dev, VHOST_F_LOG_ALL)) ?
> vq->log : NULL;
>
> - for (;;) {
> - head = vhost_get_vq_desc(&net->dev, vq, vq->iov,
> - ARRAY_SIZE(vq->iov),
> - &out, &in,
> - vq_log, &log);
> + while ((datalen = vhost_head_len(vq, sock->sk))) {
> + headcount = vhost_get_desc_n(vq, vq->heads, datalen+vhost_hlen,
checkpatch does not catch this but please add spaces around +.
> + &in, vq_log, &log);
> + if (headcount < 0)
> + break;
> /* OK, now we need to know about added descriptors. */
> - if (head == vq->num) {
> + if (!headcount) {
> if (unlikely(vhost_enable_notify(vq))) {
> /* They have slipped one in as we were
> * doing that: check again. */
> @@ -241,46 +254,54 @@ static void handle_rx(struct vhost_net *
> break;
> }
> /* We don't need to be notified again. */
> - if (out) {
> - vq_err(vq, "Unexpected descriptor format for RX: "
> - "out %d, int %d\n",
> - out, in);
> - break;
> - }
> - /* Skip header. TODO: support TSO/mergeable rx buffers. */
> - s = move_iovec_hdr(vq->iov, vq->hdr, hdr_size, in);
> + /* Skip header. TODO: support TSO. */
> + s = move_iovec_hdr(vq->iov, vq->hdr, vhost_hlen, in);
> msg.msg_iovlen = in;
> len = iov_length(vq->iov, in);
> /* Sanity check */
> if (!len) {
> vq_err(vq, "Unexpected header len for RX: "
> "%zd expected %zd\n",
> - iov_length(vq->hdr, s), hdr_size);
> + iov_length(vq->hdr, s), vhost_hlen);
> break;
> }
> err = sock->ops->recvmsg(NULL, sock, &msg,
> len, MSG_DONTWAIT | MSG_TRUNC);
> /* TODO: Check specific error and bomb out unless EAGAIN? */
> if (err < 0) {
> - vhost_discard_vq_desc(vq);
> + vhost_discard_desc(vq, headcount);
> break;
> }
> - /* TODO: Should check and handle checksum. */
> - if (err > len) {
> - pr_err("Discarded truncated rx packet: "
> - " len %d > %zd\n", err, len);
> - vhost_discard_vq_desc(vq);
> + if (err != datalen) {
> + pr_err("Discarded rx packet: "
> + " len %d, expected %zd\n", err, datalen);
> + vhost_discard_desc(vq, headcount);
> continue;
> }
> len = err;
> - err = memcpy_toiovec(vq->hdr, (unsigned char *)&hdr, hdr_size);
> + err = memcpy_toiovec(vq->hdr, (unsigned char *)&hdr,
> + vhost_hlen);
> if (err) {
> vq_err(vq, "Unable to write vnet_hdr at addr %p: %d\n",
> vq->iov->iov_base, err);
> break;
> }
> - len += hdr_size;
> - vhost_add_used_and_signal(&net->dev, vq, head, len);
> + /* TODO: Should check and handle checksum. */
> + if (vhost_has_feature(&net->dev, VIRTIO_NET_F_MRG_RXBUF)) {
> + struct virtio_net_hdr_mrg_rxbuf hdr;
> + struct iovec *iov = vhost_hlen ? vq->hdr : vq->iov;
> +
> + if (memcpy_toiovecend(iov, (unsigned char *)&headcount,
> + offsetof(typeof(hdr), num_buffers),
> + sizeof(hdr.num_buffers))) {
> + vq_err(vq, "Failed num_buffers write");
> + vhost_discard_desc(vq, headcount);
> + break;
> + }
> + }
> + len += vhost_hlen;
> + vhost_add_used_and_signal_n(&net->dev, vq, vq->heads,
> + headcount);
> if (unlikely(vq_log))
> vhost_log_write(vq, vq_log, log, len);
> total_len += len;
> @@ -561,9 +582,24 @@ done:
>
> static int vhost_net_set_features(struct vhost_net *n, u64 features)
> {
> - size_t hdr_size = features & (1 << VHOST_NET_F_VIRTIO_NET_HDR) ?
> - sizeof(struct virtio_net_hdr) : 0;
> + size_t vhost_hlen;
> + size_t sock_hlen;
> int i;
> +
> + if (features & (1 << VHOST_NET_F_VIRTIO_NET_HDR)) {
> + /* vhost provides vnet_hdr */
> + vhost_hlen = sizeof(struct virtio_net_hdr);
> + if (features & (1 << VIRTIO_NET_F_MRG_RXBUF))
> + vhost_hlen = sizeof(struct virtio_net_hdr_mrg_rxbuf);
> + sock_hlen = 0;
> + } else {
> + /* socket provides vnet_hdr */
> + vhost_hlen = 0;
> + if (features & (1 << VIRTIO_NET_F_MRG_RXBUF))
> + sock_hlen = sizeof(struct virtio_net_hdr_mrg_rxbuf);
> + else
> + sock_hlen = sizeof(struct virtio_net_hdr);
> + }
> mutex_lock(&n->dev.mutex);
> if ((features & (1 << VHOST_F_LOG_ALL)) &&
> !vhost_log_access_ok(&n->dev)) {
> @@ -574,7 +610,8 @@ static int vhost_net_set_features(struct
> smp_wmb();
> for (i = 0; i < VHOST_NET_VQ_MAX; ++i) {
> mutex_lock(&n->vqs[i].mutex);
> - n->vqs[i].hdr_size = hdr_size;
> + n->vqs[i].vhost_hlen = vhost_hlen;
> + n->vqs[i].sock_hlen = sock_hlen;
> mutex_unlock(&n->vqs[i].mutex);
> }
> vhost_net_flush(n);
> diff -ruNp net-next-v0/drivers/vhost/vhost.c net-next-v5/drivers/vhost/vhost.c
> --- net-next-v0/drivers/vhost/vhost.c 2010-04-22 11:31:57.000000000 -0700
> +++ net-next-v5/drivers/vhost/vhost.c 2010-04-22 12:19:59.000000000 -0700
> @@ -114,7 +114,8 @@ static void vhost_vq_reset(struct vhost_
> vq->used_flags = 0;
> vq->log_used = false;
> vq->log_addr = -1ull;
> - vq->hdr_size = 0;
> + vq->vhost_hlen = 0;
> + vq->sock_hlen = 0;
> vq->private_data = NULL;
> vq->log_base = NULL;
> vq->error_ctx = NULL;
> @@ -861,6 +862,53 @@ static unsigned get_indirect(struct vhos
> return 0;
> }
>
> +/* This is a multi-buffer version of vhost_get_vq_desc
> + * @vq - the relevant virtqueue
> + * datalen - data length we'll be reading
> + * @iovcount - returned count of io vectors we fill
> + * @log - vhost log
> + * @log_num - log offset
> + * returns number of buffer heads allocated, negative on error
> + */
> +int vhost_get_desc_n(struct vhost_virtqueue *vq, struct vring_used_elem *heads,
> + int datalen, int *iovcount, struct vhost_log *log,
> + unsigned int *log_num)
> +{
> + int out, in;
> + int seg = 0; /* iov index */
In rest of code, I always put comments above the commented code,
not to the right of it.
> + int hc = 0; /* head count */
Maybe just call the variable head_count? That'd make the
comment unnecessary.
> + int rv;
rest of code uses r or ret for such variables.
> +
> + while (datalen > 0) {
> + if (hc >= VHOST_NET_MAX_SG) {
> + rv = -ENOBUFS;
> + goto err;
> + }
> + heads[hc].id = vhost_get_desc(vq->dev, vq, vq->iov+seg,
> + ARRAY_SIZE(vq->iov)-seg, &out,
same here, spaces around + and -
> + &in, log, log_num);
> + if (heads[hc].id == vq->num) {
> + rv = 0;
> + goto err;
> + }
> + if (out || in <= 0) {
> + vq_err(vq, "unexpected descriptor format for RX: "
> + "out %d, in %d\n", out, in);
> + rv = -EINVAL;
> + goto err;
> + }
> + heads[hc].len = iov_length(vq->iov+seg, in);
and here
> + datalen -= heads[hc].len;
> + hc++;
I use ++x in the rest of the code wher I don't care for
the old value.
> + seg += in;
> + }
> + *iovcount = seg;
> + return hc;
> +err:
> + vhost_discard_desc(vq, hc);
> + return rv;
> +}
> +
> /* This looks in the virtqueue and for the first available buffer, and converts
> * it to an iovec for convenient access. Since descriptors consist of some
> * number of output then some number of input descriptors, it's actually two
> @@ -868,7 +916,7 @@ static unsigned get_indirect(struct vhos
> *
> * This function returns the descriptor number found, or vq->num (which
> * is never a valid descriptor number) if none was found. */
> -unsigned vhost_get_vq_desc(struct vhost_dev *dev, struct vhost_virtqueue *vq,
> +unsigned vhost_get_desc(struct vhost_dev *dev, struct vhost_virtqueue *vq,
> struct iovec iov[], unsigned int iov_size,
> unsigned int *out_num, unsigned int *in_num,
> struct vhost_log *log, unsigned int *log_num)
> @@ -986,9 +1034,9 @@ unsigned vhost_get_vq_desc(struct vhost_
> }
>
> /* Reverse the effect of vhost_get_vq_desc. Useful for error handling. */
> -void vhost_discard_vq_desc(struct vhost_virtqueue *vq)
> +void vhost_discard_desc(struct vhost_virtqueue *vq, int n)
> {
> - vq->last_avail_idx--;
> + vq->last_avail_idx -= n;
> }
>
> /* After we've used one of their buffers, we tell them about it. We'll then
> @@ -1017,6 +1065,54 @@ int vhost_add_used(struct vhost_virtqueu
> if (unlikely(vq->log_used)) {
> /* Make sure data is seen before log. */
> smp_wmb();
> + log_write(vq->log_base, vq->log_addr + sizeof *vq->used->ring *
> + (vq->last_used_idx % vq->num),
> + sizeof *vq->used->ring);
> + log_write(vq->log_base, vq->log_addr, sizeof *vq->used->ring);
> + if (vq->log_ctx)
> + eventfd_signal(vq->log_ctx, 1);
> + }
> + vq->last_used_idx++;
> + return 0;
The above looks like a copy from an old version of vhost.
> +}
> +
> +/* After we've used one of their buffers, we tell them about it. We'll then
> + * want to notify the guest, using eventfd. */
> +int vhost_add_used_n(struct vhost_virtqueue *vq, struct vring_used_elem *heads,
> + int count)
please align int at least to the right of (.
> +{
> + struct vring_used_elem *used;
> + int start, n;
> +
> + if (count <= 0)
> + return -EINVAL;
Is the above necessary?
Just make count unsigned for clarity?
> +
> + start = vq->last_used_idx % vq->num;
> + if (vq->num - start < count)
> + n = vq->num - start;
> + else
> + n = count;
I'd say use min, or reorder code as I suggest below
to only have a single if.
> + used = vq->used->ring + start;
> + if (copy_to_user(used, heads, sizeof(heads[0])*n)) {
Pls put spaces around *
Also I'd prefer sizeof *used here instead of sizeof(heads[0]),
it's shorter. My style is also to put () after sizeof only
if the argument is a type, and order the expression
to make precedence not matter. So we'd end up with:
n * sizeof *used.
> + vq_err(vq, "Failed to write used");
> + return -EFAULT;
> + }
> + if (n < count) { /* wrapped the ring */
In rest of code, I always put comments above the commented code,
not to the right of it.
The only case we can have n < count is wrap-around,
so I find this a roundabout way to code this up, and we
end up with test for same condition, which makes the
code fragile (ignoring performance impact).
Also note need for extra logging as explained below.
Maybe it's cleanest to have static __vhost_add_used_n which assumes
no wrap-around, and then just call:
vhost_add_used_n()
if (unlikely(n < count)) {
if (r = __vhost_add_used_n())
return r;
heads += n;
count -= n;
}
return __vhost_add_used_n()
this would do an extra write into used index,
but this is almost freem
> + used = vq->used->ring;
> + if (copy_to_user(used, heads+n, sizeof(heads[0])*(count-n))) {
spaces around + and *
> + vq_err(vq, "Failed to write used");
> + return -EFAULT;
> + }
> + }
> + /* Make sure buffer is written before we update index. */
> + smp_wmb();
> + if (put_user(vq->last_used_idx+count, &vq->used->idx)) {
and here
> + vq_err(vq, "Failed to increment used idx");
> + return -EFAULT;
> + }
> + if (unlikely(vq->log_used)) {
> + /* Make sure data is seen before log. */
> + smp_wmb();
> /* Log used ring entry write. */
> log_write(vq->log_base,
> vq->log_addr +
this uses 'used' pointer, but I think it's wrong in case
of wrap-around. I think we'll need extra logging for
wrap-around. That would be 3 copies of identical code:
maybe add a function?
static void vhost_log_used(struct vhost_virtqueue *vq,
struct vring_used_elem __user *used)
{
/* Make sure data is seen before log. */
smp_wmb();
/* Log used ring entry write. */
log_write(vq->log_base,
vq->log_addr +
((void __user *)used - (void __user *)vq->used),
sizeof *used);
/* Log used index update. */
log_write(vq->log_base,
vq->log_addr + offsetof(struct vring_used, idx),
sizeof vq->used->idx);
if (vq->log_ctx)
eventfd_signal(vq->log_ctx, 1);
}
> @@ -1029,7 +1125,7 @@ int vhost_add_used(struct vhost_virtqueu
> if (vq->log_ctx)
> eventfd_signal(vq->log_ctx, 1);
> }
> - vq->last_used_idx++;
> + vq->last_used_idx += count;
> return 0;
> }
>
> @@ -1062,6 +1158,15 @@ void vhost_add_used_and_signal(struct vh
> vhost_signal(dev, vq);
> }
>
> +/* multi-buffer version of vhost_add_used_and_signal */
> +void vhost_add_used_and_signal_n(struct vhost_dev *dev,
> + struct vhost_virtqueue *vq,
> + struct vring_used_elem *heads, int count)
> +{
> + vhost_add_used_n(vq, heads, count);
> + vhost_signal(dev, vq);
> +}
> +
> /* OK, now we need to know about added descriptors. */
> bool vhost_enable_notify(struct vhost_virtqueue *vq)
> {
> @@ -1086,7 +1191,7 @@ bool vhost_enable_notify(struct vhost_vi
> return false;
> }
>
> - return avail_idx != vq->last_avail_idx;
> + return avail_idx != vq->avail_idx;
> }
>
> /* We don't need to be notified again. */
> diff -ruNp net-next-v0/drivers/vhost/vhost.h net-next-v5/drivers/vhost/vhost.h
> --- net-next-v0/drivers/vhost/vhost.h 2010-03-22 12:04:38.000000000 -0700
> +++ net-next-v5/drivers/vhost/vhost.h 2010-04-22 11:35:54.000000000 -0700
> @@ -84,7 +84,9 @@ struct vhost_virtqueue {
> struct iovec indirect[VHOST_NET_MAX_SG];
> struct iovec iov[VHOST_NET_MAX_SG];
> struct iovec hdr[VHOST_NET_MAX_SG];
> - size_t hdr_size;
> + size_t vhost_hlen;
> + size_t sock_hlen;
> + struct vring_used_elem heads[VHOST_NET_MAX_SG];
> /* We use a kind of RCU to access private pointer.
> * All readers access it from workqueue, which makes it possible to
> * flush the workqueue instead of synchronize_rcu. Therefore readers do
> @@ -120,16 +122,23 @@ long vhost_dev_ioctl(struct vhost_dev *,
> int vhost_vq_access_ok(struct vhost_virtqueue *vq);
> int vhost_log_access_ok(struct vhost_dev *);
>
> -unsigned vhost_get_vq_desc(struct vhost_dev *, struct vhost_virtqueue *,
> +int vhost_get_desc_n(struct vhost_virtqueue *, struct vring_used_elem *heads,
> + int datalen, int *iovcount, struct vhost_log *log,
> + unsigned int *log_num);
> +unsigned vhost_get_desc(struct vhost_dev *, struct vhost_virtqueue *,
> struct iovec iov[], unsigned int iov_count,
> unsigned int *out_num, unsigned int *in_num,
> struct vhost_log *log, unsigned int *log_num);
> -void vhost_discard_vq_desc(struct vhost_virtqueue *);
> +void vhost_discard_desc(struct vhost_virtqueue *, int);
>
> int vhost_add_used(struct vhost_virtqueue *, unsigned int head, int len);
> -void vhost_signal(struct vhost_dev *, struct vhost_virtqueue *);
> +int vhost_add_used_n(struct vhost_virtqueue *, struct vring_used_elem *heads,
> + int count);
> void vhost_add_used_and_signal(struct vhost_dev *, struct vhost_virtqueue *,
> - unsigned int head, int len);
> + unsigned int id, int len);
> +void vhost_add_used_and_signal_n(struct vhost_dev *, struct vhost_virtqueue *,
> + struct vring_used_elem *heads, int count);
> +void vhost_signal(struct vhost_dev *, struct vhost_virtqueue *);
> void vhost_disable_notify(struct vhost_virtqueue *);
> bool vhost_enable_notify(struct vhost_virtqueue *);
>
> @@ -149,7 +158,8 @@ enum {
> VHOST_FEATURES = (1 << VIRTIO_F_NOTIFY_ON_EMPTY) |
> (1 << VIRTIO_RING_F_INDIRECT_DESC) |
> (1 << VHOST_F_LOG_ALL) |
> - (1 << VHOST_NET_F_VIRTIO_NET_HDR),
> + (1 << VHOST_NET_F_VIRTIO_NET_HDR) |
> + (1 << VIRTIO_NET_F_MRG_RXBUF),
> };
>
> static inline int vhost_has_feature(struct vhost_dev *dev, int bit)
>
^ permalink raw reply
* [patch v2] sctp: cleanup: remove duplicate assignment
From: Dan Carpenter @ 2010-04-24 17:19 UTC (permalink / raw)
To: Vlad Yasevich
Cc: Sridhar Samudrala, David S. Miller, Wei Yongjun, Chris Dischino,
linux-sctp, netdev, kernel-janitors
In-Reply-To: <4BD1AE9D.6090807@hp.com>
This assignment isn't needed because we did it earlier already.
Also another reason to delete the assignment is because it triggers a
Smatch warning about checking for NULL pointers after a dereference.
Reported-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Dan Carpenter <error27@gmail.com>
---
Thanks Vlad. I came so close to seeing that myself if only I had openned
my eyes a tiny bit more. :P
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 17cb400..33aed1c 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -419,10 +419,17 @@ struct sctp_chunk *sctp_make_init_ack(const struct sctp_association *asoc,
if (!retval)
goto nomem_chunk;
- /* Per the advice in RFC 2960 6.4, send this reply to
- * the source of the INIT packet.
+ /* RFC 2960 6.4 Multi-homed SCTP Endpoints
+ *
+ * An endpoint SHOULD transmit reply chunks (e.g., SACK,
+ * HEARTBEAT ACK, * etc.) to the same destination transport
+ * address from which it received the DATA or control chunk
+ * to which it is replying.
+ *
+ * [INIT ACK back to where the INIT came from.]
*/
retval->transport = chunk->transport;
+
retval->subh.init_hdr =
sctp_addto_chunk(retval, sizeof(initack), &initack);
retval->param_hdr.v = sctp_addto_chunk(retval, addrs_len, addrs.v);
@@ -461,18 +468,6 @@ struct sctp_chunk *sctp_make_init_ack(const struct sctp_association *asoc,
/* We need to remove the const qualifier at this point. */
retval->asoc = (struct sctp_association *) asoc;
- /* RFC 2960 6.4 Multi-homed SCTP Endpoints
- *
- * An endpoint SHOULD transmit reply chunks (e.g., SACK,
- * HEARTBEAT ACK, * etc.) to the same destination transport
- * address from which it received the DATA or control chunk
- * to which it is replying.
- *
- * [INIT ACK back to where the INIT came from.]
- */
- if (chunk)
- retval->transport = chunk->transport;
-
nomem_chunk:
kfree(cookie);
nomem_cookie:
^ permalink raw reply related
* Re: [PATCH v3] rps: optimize rps_get_cpu()
From: jamal @ 2010-04-24 16:22 UTC (permalink / raw)
To: Changli Gao; +Cc: David Miller, Tom Herbert, Eric Dumazet, netdev
In-Reply-To: <q2i412e6f7f1004240919la9825819i81a4d3063ed781a5@mail.gmail.com>
On Sun, 2010-04-25 at 00:19 +0800, Changli Gao wrote:
> Maybe I have used the wrong word. Sorry. If the ports are already in
> cache, the new code has only one cache access for ports, and the later
> operations are in registers.
Ok, that makes more sense - so your commit log is confusing.
You are saving a shift operation per packet - probably not a big deal
but better than zero ;->
cheers,
jamal
^ permalink raw reply
* Re: [PATCH v3] rps: optimize rps_get_cpu()
From: Changli Gao @ 2010-04-24 16:19 UTC (permalink / raw)
To: hadi; +Cc: David Miller, Tom Herbert, Eric Dumazet, netdev
In-Reply-To: <1272125052.8918.18.camel@bigi>
On Sun, Apr 25, 2010 at 12:04 AM, jamal <hadi@cyberus.ca> wrote:
>
> By the time you hit this code (at least on machines that make sense for
> RPS), you already have the ethernet header, IP header and transport
> ports in cache, no?
> I think the sport << 16 shifting is avoided - but i dont think theres
> any effect on mem access.
Maybe I have used the wrong word. Sorry. If the ports are already in
cache, the new code has only one cache access for ports, and the later
operations are in registers.
--
Regards，
Changli Gao(xiaosuo@gmail.com)
^ permalink raw reply
* Re: [PATCH v3] rps: optimize rps_get_cpu()
From: jamal @ 2010-04-24 16:04 UTC (permalink / raw)
To: Changli Gao; +Cc: David Miller, Tom Herbert, Eric Dumazet, netdev
In-Reply-To: <1272122227-13070-1-git-send-email-xiaosuo@gmail.com>
By the time you hit this code (at least on machines that make sense for
RPS), you already have the ethernet header, IP header and transport
ports in cache, no?
I think the sport << 16 shifting is avoided - but i dont think theres
any effect on mem access.
cheers,
jamal
^ permalink raw reply
* [PATCH v3] rps: optimize rps_get_cpu()
From: Changli Gao @ 2010-04-24 15:17 UTC (permalink / raw)
To: David Miller; +Cc: Tom Herbert, Eric Dumazet, netdev, Changli Gao
optimize rps_get_cpu().
don't initialize ports when we can get the ports. one memory access for ports
than two.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
----
net/core/dev.c | 24 +++++++++++-------------
1 file changed, 11 insertions(+), 13 deletions(-)
diff --git a/net/core/dev.c b/net/core/dev.c
index a4a7c36..4d43f1a 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2229,7 +2229,11 @@ static int get_rps_cpu(struct net_device *dev, struct sk_buff *skb,
int cpu = -1;
u8 ip_proto;
u16 tcpu;
- u32 addr1, addr2, ports, ihl;
+ u32 addr1, addr2, ihl;
+ union {
+ u32 v32;
+ u16 v16[2];
+ } ports;
if (skb_rx_queue_recorded(skb)) {
u16 index = skb_get_rx_queue(skb);
@@ -2275,7 +2279,6 @@ static int get_rps_cpu(struct net_device *dev, struct sk_buff *skb,
default:
goto done;
}
- ports = 0;
switch (ip_proto) {
case IPPROTO_TCP:
case IPPROTO_UDP:
@@ -2285,25 +2288,20 @@ static int get_rps_cpu(struct net_device *dev, struct sk_buff *skb,
case IPPROTO_SCTP:
case IPPROTO_UDPLITE:
if (pskb_may_pull(skb, (ihl * 4) + 4)) {
- __be16 *hports = (__be16 *) (skb->data + (ihl * 4));
- u32 sport, dport;
-
- sport = (__force u16) hports[0];
- dport = (__force u16) hports[1];
- if (dport < sport)
- swap(sport, dport);
- ports = (sport << 16) + dport;
+ ports.v32 = * (__force u32 *) (skb->data + (ihl * 4));
+ if (ports.v16[1] < ports.v16[0])
+ swap(ports.v16[0], ports.v16[1]);
+ break;
}
- break;
-
default:
+ ports.v32 = 0;
break;
}
/* get a consistent hash (same value on both flow directions) */
if (addr2 < addr1)
swap(addr1, addr2);
- skb->rxhash = jhash_3words(addr1, addr2, ports, hashrnd);
+ skb->rxhash = jhash_3words(addr1, addr2, ports.v32, hashrnd);
if (!skb->rxhash)
skb->rxhash = 1;
^ permalink raw reply related
* Re: [net-next-2.6 PATCH 1/2] Add ndo_set_vf_port_profile (was iovnl)
From: Scott Feldman @ 2010-04-24 14:37 UTC (permalink / raw)
To: Chris Wright; +Cc: davem, netdev, arnd
In-Reply-To: <20100424022242.GF3843@x200.localdomain>
On 4/23/10 7:22 PM, "Chris Wright" <chrisw@redhat.com> wrote:
>> I took some liberties and s/SR-IOV/IOV in the code comments around the
>> ndo_set_vf_* cmds as they can apply to both SR-IOV and non-SR-IOV adapters,
>> as long as there is a PF:VF parent:child relationship.
>
> For enic case, which do you expect to use for net_dev and VF index? Would
> this be VF + index== 0 (meaning the degenerate case you described last
> time where PF==VF)?
Yes, for this enic PF==VF, but that's a short term situation. It's a small
matter of programming (in firmware) to turn enic into the more general case.
But I want to focus on getting port-profile support in first, with the
current enic+firmware.
>> A port-profile is used to configure/enable the network port backing the VF,
>> not
>> to configure the host-facing side of the VF.
>
> How shall we do the lldpad case?
Same as before with iovnl. The sender of RTM_SETLINK msg (say libvirt)
needs to send with mcast group RTMGRP_LINK and listener (say lldpad) needs
to listen on that mcast group. This way, both kernel and user-space get the
msg.
>> + if (tb[IFLA_VF_PORT_PROFILE]) {
>> + struct ifla_vf_port_profile *ivp;
>> + ivp = nla_data(tb[IFLA_VF_PORT_PROFILE]);
>> + err = -EOPNOTSUPP;
>> + if (ops->ndo_set_vf_port_profile)
>> + ivp->port_profile[sizeof(ivp->port_profile)-1] = 0;
>> + ivp->host_uuid[sizeof(ivp->host_uuid)-1] = 0;
>> + ivp->client_uuid[sizeof(ivp->client_uuid)-1] = 0;
>> + ivp->client_name[sizeof(ivp->client_name)-1] = 0;
>
> Seems a little unusual to modify the buffer, add a kernel internal structure
> that can be passed to ndo callback (where buffer lens can be knonw)?
Ok, let me see what can be done here.
-scott
^ permalink raw reply
* Re: [net-next-2.6 PATCH 2/2] add enic ndo_vf_set_port_profile op support for dynamic vnics
From: Scott Feldman @ 2010-04-24 14:30 UTC (permalink / raw)
To: Chris Wright; +Cc: davem, netdev, arnd
In-Reply-To: <20100424022121.GE3843@x200.localdomain>
On 4/23/10 7:21 PM, "Chris Wright" <chrisw@redhat.com> wrote:
> * Scott Feldman (scofeldm@cisco.com) wrote:
>> -#define DRV_VERSION "1.3.1.1"
>> +#define DRV_VERSION "1.3.1.1-iov"
>
> not a version bump?
Anything ver diff will work to tell this patch from what's upstream already.
>> @@ -810,14 +819,24 @@ static void enic_reset_mcaddrs(struct enic *enic)
>>
>> static int enic_set_mac_addr(struct net_device *netdev, char *addr)
>> {
>> - if (!is_valid_ether_addr(addr))
>> - return -EADDRNOTAVAIL;
>> + struct enic *enic = netdev_priv(netdev);
>>
>> - memcpy(netdev->dev_addr, addr, netdev->addr_len);
>> + if (enic_is_dynamic(enic)) {
>> + random_ether_addr(netdev->dev_addr);
>
> Would it make more sense to just ignore this? Then the default (not
> port profile configured yet) mac is still a useful identifier.
Dynamic enics start out with all zero mac addr, so this assigns a random one
to the interface when created. After I sent out this patch, I realized if
mac addr arg wasn't included in port-profile by user (it's optional), then I
should use this random netdev->dev_addr for the port-profile mac addr. Next
patch.
>> +static int enic_set_mac_address(struct net_device *netdev, void *p)
>> +{
>> + return -EOPNOTSUPP;
>> +}
>> +
>
> Ever? Even on non-dynamic enic? Oh, I see, this was just a lie before ;-)
Static enics get mac addr from mgmt tool; and dynamic enics get mac addr
during port-profile assignment. In either case, there is no need for the
user to change the interface mac addr, so I'm adding this explicit block.
It's weird, without setting any value to ndo_set_mac_address, you can change
the mac addr on the interface when the interface is DOWN but not when it's
UP. Not sure why that is. In any case, adding this ndo_set_mac_address
callback blocks all attempts to change mac addr on interface.
>> +static int enic_set_vf_port_profile(struct net_device *netdev, int vf,
>> + u8 *port_profile, u8 *mac, u8 *host_uuid, u8 *client_uuid,
>> + u8 *client_name)
>> +{
>> + struct enic *enic = netdev_priv(netdev);
>> + struct vic_provinfo *vp;
>> + u8 oui[3] = VIC_PROVINFO_CISCO_OUI;
>> + int err;
>> +
>> + if (!enic_is_dynamic(enic))
>> + return -EOPNOTSUPP;
>
> Do you want to validate vf (like require it to be 0) or something?
Yes, I should add a check for vf == 0.
> How should userspace know to talk directly to the VF (dynamic enic) in
> this device, but a PF + VF_index for another device?
Can we use IFLA_NUM_VF? In this enic case since PF==VF (for now), we'll
need to return IFLA_NUM_VF=1. Let me see what we can do here.
>> + err = enic_vnic_dev_deinit(enic);
>> + if (err)
>> + goto err_out;
>> +
>> + err = enic_dev_init_prov(enic, vp);
>> +
>> +err_out:
>> + vic_provinfo_free(vp);
>> +
>> + enic_set_multicast_list(netdev);
>
> Should that happen in error case (and is the locking correct)?
Locking is correct. I change this to do this only on the non-err patch.
-scott
^ permalink raw reply
* Re: [PATCH v6] net: batch skb dequeueing from softnet input_pkt_queue
From: jamal @ 2010-04-24 14:10 UTC (permalink / raw)
To: Eric Dumazet
Cc: Changli Gao, David S. Miller, Tom Herbert, Stephen Hemminger,
netdev
In-Reply-To: <1272060153.8918.8.camel@bigi>
[-- Attachment #1: Type: text/plain, Size: 203 bytes --]
On Fri, 2010-04-23 at 18:02 -0400, jamal wrote:
> Ive done a setup with the last patch from Changli + net-next - I will
> post test results tomorrow AM.
ok, annotated results attached.
cheers,
jamal
[-- Attachment #2: summary-apr23.txt --]
[-- Type: text/plain, Size: 45513 bytes --]
sink cpu all cpuint cpuapp
nn-standalone 93.95% 84.5% 99.8% 79.8%
nn-rps 96.41% 85.4% 95.5% 82.5%
nn-cl 97.29% 84.0% 99.9% 79.6%
nn-cl-rps 97.76% 86.5% 96.5% 84.8%
nn-standalone: Basic net-next from Apr23
nn-rps: Basic net-next from Apr23 with rps mask ee and irq affinity to cpu0
nn-cl: Basic net-next from Apr23 + Changli patch
nn-cl-rps: Basic net-next from Apr23 + Changli patch + rps mask ee,irq aff cpu0
sink: the amount of traffic the system was able to sink in.
cpu all: avg % system cpu consumed in test
cpuint: avg %cpu consumed by the cpu where interrupts happened
cpuapp: avg %cpu consumed by a sample cpu which did app processing
Testing was as previously explained..
I repeated each test 4-5 times and took averages..
It seems the non-rps case has improved drammatically since the last
net-next i tested. The rps case has also improved but the gap between
rps and non-rps is smaller.
[There are just too many variables for me to pinpoint
to one item as being the contributor. For example sky2 driver may
have become worse (consumes more cycles) but i cant quantify it yet
(i just see sky2_rx_submit showing up higher in profiles than before).
Also call_function_single_interrupt shows up prominently on application
processing CPUs but improved by Changli's changes].
After doing the math, I dont trust my results after applying Changlis patch.
It seems both the rps and non-rps case have gotten better (and i dont
see Changlis contribution to non-rps). It also seems that the gap between
rps and non-rps is non-existent now. In other words, there is no benefit to
using rps (it consumes more cpu for the same throughput). So it is likely
that i need to repeat these tests; maybe i did something wrong in my setup...
And here are the profiles:
--------------------------
cpu0 always received all the interrupts regardless of the tests.
cpu1, 7 etc were processing apps..
I could not spot much difference between before and after Changli's
I: Test setup : nn-standalone: Basic net-next from Apr23
All cpus
-------------------------------------------------------------------------------
PerfTop: 3784 irqs/sec kernel:84.2% [1000Hz cycles], (all, 8 CPUs)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ___________________________ ________
3254.00 10.3% sky2_poll [sky2]
1853.00 5.9% _raw_spin_lock_irqsave [kernel]
872.00 2.8% fget [kernel]
870.00 2.8% copy_user_generic_string [kernel]
819.00 2.6% _raw_spin_unlock_irqrestore [kernel]
729.00 2.3% sys_epoll_ctl [kernel]
701.00 2.2% datagram_poll [kernel]
615.00 2.0% udp_recvmsg [kernel]
602.00 1.9% _raw_spin_lock_bh [kernel]
595.00 1.9% system_call [kernel]
592.00 1.9% kmem_cache_free [kernel]
574.00 1.8% schedule [kernel]
568.00 1.8% _raw_spin_lock [kernel]
-------------------------------------------------------------------------------
PerfTop: 3574 irqs/sec kernel:85.1% [1000Hz cycles], (all, 8 CPUs)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ___________________________ ________
5023.00 10.9% sky2_poll [sky2]
2762.00 6.0% _raw_spin_lock_irqsave [kernel]
1319.00 2.9% copy_user_generic_string [kernel]
1306.00 2.8% fget [kernel]
1198.00 2.6% _raw_spin_unlock_irqrestore [kernel]
1071.00 2.3% datagram_poll [kernel]
1061.00 2.3% sys_epoll_ctl [kernel]
927.00 2.0% _raw_spin_lock_bh [kernel]
917.00 2.0% system_call [kernel]
901.00 1.9% udp_recvmsg [kernel]
895.00 1.9% kmem_cache_free [kernel]
819.00 1.8% _raw_spin_lock [kernel]
802.00 1.7% schedule [kernel]
774.00 1.7% sys_epoll_wait [kernel]
720.00 1.6% kmem_cache_alloc [kernel]
-------------------------------------------------------------------------------
PerfTop: 1000 irqs/sec kernel:100.0% [1000Hz cycles], (all, cpu: 0)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ______________________ ________
751.00 36.1% sky2_poll [sky2]
108.00 5.2% __udp4_lib_lookup [kernel]
95.00 4.6% ip_route_input [kernel]
83.00 4.0% _raw_spin_lock [kernel]
79.00 3.8% _raw_spin_lock_irqsave [kernel]
77.00 3.7% __netif_receive_skb [kernel]
77.00 3.7% __alloc_skb [kernel]
66.00 3.2% ip_rcv [kernel]
60.00 2.9% __udp4_lib_rcv [kernel]
54.00 2.6% sock_queue_rcv_skb [kernel]
45.00 2.2% sky2_rx_submit [sky2]
42.00 2.0% __wake_up_common [kernel]
40.00 1.9% __kmalloc [kernel]
39.00 1.9% sock_def_readable [kernel]
30.00 1.4% ep_poll_callback [kernel]
-------------------------------------------------------------------------------
PerfTop: 1001 irqs/sec kernel:99.8% [1000Hz cycles], (all, cpu: 0)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ______________________ ________
3511.00 36.7% sky2_poll [sky2]
519.00 5.4% __udp4_lib_lookup [kernel]
431.00 4.5% ip_route_input [kernel]
353.00 3.7% _raw_spin_lock_irqsave [kernel]
351.00 3.7% __alloc_skb [kernel]
338.00 3.5% __netif_receive_skb [kernel]
337.00 3.5% _raw_spin_lock [kernel]
307.00 3.2% ip_rcv [kernel]
264.00 2.8% sky2_rx_submit [sky2]
254.00 2.7% sock_queue_rcv_skb [kernel]
246.00 2.6% __udp4_lib_rcv [kernel]
206.00 2.2% sock_def_readable [kernel]
177.00 1.9% __wake_up_common [kernel]
168.00 1.8% __kmalloc [kernel]
-------------------------------------------------------------------------------
PerfTop: 908 irqs/sec kernel:80.0% [1000Hz cycles], (all, cpu: 1)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ___________________________ ________
177.00 6.7% _raw_spin_lock_irqsave [kernel]
120.00 4.5% copy_user_generic_string [kernel]
110.00 4.2% fget [kernel]
108.00 4.1% datagram_poll [kernel]
98.00 3.7% _raw_spin_lock_bh [kernel]
91.00 3.4% sys_epoll_ctl [kernel]
89.00 3.4% kmem_cache_free [kernel]
77.00 2.9% system_call [kernel]
76.00 2.9% schedule [kernel]
76.00 2.9% _raw_spin_unlock_irqrestore [kernel]
63.00 2.4% fput [kernel]
61.00 2.3% sys_epoll_wait [kernel]
61.00 2.3% udp_recvmsg [kernel]
49.00 1.8% process_recv mcpudp
-------------------------------------------------------------------------------
PerfTop: 815 irqs/sec kernel:79.8% [1000Hz cycles], (all, cpu: 1)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ___________________________ _________________
491.00 8.0% _raw_spin_lock_irqsave [kernel.kallsyms]
285.00 4.7% copy_user_generic_string [kernel.kallsyms]
252.00 4.1% fget [kernel.kallsyms]
215.00 3.5% datagram_poll [kernel.kallsyms]
206.00 3.4% _raw_spin_unlock_irqrestore [kernel.kallsyms]
204.00 3.3% sys_epoll_ctl [kernel.kallsyms]
196.00 3.2% _raw_spin_lock_bh [kernel.kallsyms]
184.00 3.0% udp_recvmsg [kernel.kallsyms]
184.00 3.0% kmem_cache_free [kernel.kallsyms]
180.00 2.9% system_call [kernel.kallsyms]
168.00 2.7% sys_epoll_wait [kernel.kallsyms]
159.00 2.6% schedule [kernel.kallsyms]
144.00 2.4% fput [kernel.kallsyms]
II: Test setup
nn-rps: Basic net-next from Apr23 with rps mask ee and irq affinity to cpu0
-------------------------------------------------------------------------------
PerfTop: 3558 irqs/sec kernel:85.0% [1000Hz cycles], (all, 8 CPUs)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ______________________________ ________
3519.00 15.9% sky2_poll [sky2]
865.00 3.9% _raw_spin_lock_irqsave [kernel]
568.00 2.6% _raw_spin_unlock_irqrestore [kernel]
526.00 2.4% sky2_intr [sky2]
493.00 2.2% __netif_receive_skb [kernel]
477.00 2.2% _raw_spin_lock [kernel]
470.00 2.1% ip_rcv [kernel]
456.00 2.1% fget [kernel]
447.00 2.0% sys_epoll_ctl [kernel]
420.00 1.9% copy_user_generic_string [kernel]
387.00 1.8% ip_route_input [kernel]
359.00 1.6% system_call [kernel]
334.00 1.5% kmem_cache_free [kernel]
310.00 1.4% kmem_cache_alloc [kernel]
302.00 1.4% call_function_single_interrupt [kernel]
-------------------------------------------------------------------------------
PerfTop: 3546 irqs/sec kernel:85.8% [1000Hz cycles], (all, 8 CPUs)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ______________________________ ________
6592.00 16.2% sky2_poll [sky2]
1540.00 3.8% _raw_spin_lock_irqsave [kernel]
1014.00 2.5% _raw_spin_unlock_irqrestore [kernel]
885.00 2.2% fget [kernel]
881.00 2.2% _raw_spin_lock [kernel]
880.00 2.2% sky2_intr [sky2]
872.00 2.1% __netif_receive_skb [kernel]
858.00 2.1% ip_rcv [kernel]
802.00 2.0% sys_epoll_ctl [kernel]
710.00 1.7% copy_user_generic_string [kernel]
696.00 1.7% system_call [kernel]
692.00 1.7% ip_route_input [kernel]
634.00 1.6% schedule [kernel]
618.00 1.5% kmem_cache_free [kernel]
605.00 1.5% call_function_single_interrupt [kernel]
cpu0
-------------------------------------------------------------------------------
PerfTop: 971 irqs/sec kernel:96.5% [1000Hz cycles], (all, cpu: 0)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ___________________________ ________
4222.00 58.2% sky2_poll [sky2]
668.00 9.2% sky2_intr [sky2]
228.00 3.1% __alloc_skb [kernel]
183.00 2.5% get_rps_cpu [kernel]
138.00 1.9% sky2_rx_submit [sky2]
124.00 1.7% enqueue_to_backlog [kernel]
119.00 1.6% __kmalloc [kernel]
103.00 1.4% kmem_cache_alloc [kernel]
91.00 1.3% _raw_spin_lock [kernel]
90.00 1.2% _raw_spin_lock_irqsave [kernel]
73.00 1.0% swiotlb_sync_single [kernel]
72.00 1.0% irq_entries_start [kernel]
55.00 0.8% copy_user_generic_string [kernel]
53.00 0.7% _raw_spin_unlock_irqrestore [kernel]
48.00 0.7% fget [kernel]
-------------------------------------------------------------------------------
PerfTop: 998 irqs/sec kernel:94.8% [1000Hz cycles], (all, cpu: 0)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ___________________________ ________
6745.00 58.5% sky2_poll [sky2]
831.00 7.2% sky2_intr [sky2]
352.00 3.1% __alloc_skb [kernel]
281.00 2.4% get_rps_cpu [kernel]
226.00 2.0% sky2_rx_submit [sky2]
186.00 1.6% __kmalloc [kernel]
181.00 1.6% enqueue_to_backlog [kernel]
173.00 1.5% _raw_spin_lock_irqsave [kernel]
166.00 1.4% kmem_cache_alloc [kernel]
162.00 1.4% _raw_spin_lock [kernel]
99.00 0.9% swiotlb_sync_single [kernel]
98.00 0.9% irq_entries_start [kernel]
94.00 0.8% fget [kernel]
92.00 0.8% _raw_spin_unlock_irqrestore [kernel]
80.00 0.7% system_call [kernel]
cpu1
-------------------------------------------------------------------------------
PerfTop: 724 irqs/sec kernel:82.0% [1000Hz cycles], (all, cpu: 1)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ______________________________ _________________
204.00 5.3% _raw_spin_lock_irqsave [kernel.kallsyms]
153.00 4.0% _raw_spin_unlock_irqrestore [kernel.kallsyms]
147.00 3.8% call_function_single_interrupt [kernel.kallsyms]
139.00 3.6% __netif_receive_skb [kernel.kallsyms]
135.00 3.5% sys_epoll_ctl [kernel.kallsyms]
132.00 3.4% ip_rcv [kernel.kallsyms]
129.00 3.3% fget [kernel.kallsyms]
128.00 3.3% _raw_spin_lock [kernel.kallsyms]
122.00 3.2% system_call [kernel.kallsyms]
118.00 3.1% ip_route_input [kernel.kallsyms]
109.00 2.8% kmem_cache_free [kernel.kallsyms]
108.00 2.8% copy_user_generic_string [kernel.kallsyms]
90.00 2.3% schedule [kernel.kallsyms]
85.00 2.2% fput [kernel.kallsyms]
-------------------------------------------------------------------------------
PerfTop: 763 irqs/sec kernel:83.0% [1000Hz cycles], (all, cpu: 1)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ______________________________ _________________
428.00 6.2% _raw_spin_lock_irqsave [kernel.kallsyms]
302.00 4.4% _raw_spin_unlock_irqrestore [kernel.kallsyms]
269.00 3.9% __netif_receive_skb [kernel.kallsyms]
258.00 3.7% call_function_single_interrupt [kernel.kallsyms]
254.00 3.7% fget [kernel.kallsyms]
238.00 3.4% ip_rcv [kernel.kallsyms]
230.00 3.3% sys_epoll_ctl [kernel.kallsyms]
222.00 3.2% _raw_spin_lock [kernel.kallsyms]
220.00 3.2% ip_route_input [kernel.kallsyms]
197.00 2.9% system_call [kernel.kallsyms]
189.00 2.7% kmem_cache_free [kernel.kallsyms]
184.00 2.7% copy_user_generic_string [kernel.kallsyms]
144.00 2.1% ep_remove [kernel.kallsyms]
140.00 2.0% schedule [kernel.kallsyms]
-------------------------------------------------------------------------------
PerfTop: 546 irqs/sec kernel:83.3% [1000Hz cycles], (all, cpu: 1)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ______________________________ _________________
346.00 5.7% _raw_spin_lock_irqsave [kernel.kallsyms]
275.00 4.6% _raw_spin_unlock_irqrestore [kernel.kallsyms]
238.00 3.9% call_function_single_interrupt [kernel.kallsyms]
228.00 3.8% fget [kernel.kallsyms]
222.00 3.7% __netif_receive_skb [kernel.kallsyms]
219.00 3.6% sys_epoll_ctl [kernel.kallsyms]
209.00 3.5% _raw_spin_lock [kernel.kallsyms]
205.00 3.4% ip_rcv [kernel.kallsyms]
199.00 3.3% ip_route_input [kernel.kallsyms]
173.00 2.9% system_call [kernel.kallsyms]
170.00 2.8% copy_user_generic_string [kernel.kallsyms]
167.00 2.8% kmem_cache_free [kernel.kallsyms]
127.00 2.1% ep_remove [kernel.kallsyms]
123.00 2.0% dst_release [kernel.kalls
III: Test setup
nn-cl: Basic net-next from Apr23 + Changli patch
-------------------------------------------------------------------------------
PerfTop: 3789 irqs/sec kernel:84.1% [1000Hz cycles], (all, 8 CPUs)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ___________________________ ____________________
3514.00 10.2% sky2_poll [sky2]
1862.00 5.4% _raw_spin_lock_irqsave [kernel]
1274.00 3.7% system_call [kernel]
926.00 2.7% fget [kernel]
872.00 2.5% _raw_spin_unlock_irqrestore [kernel]
862.00 2.5% copy_user_generic_string [kernel]
766.00 2.2% sys_epoll_ctl [kernel]
765.00 2.2% datagram_poll [kernel]
671.00 2.0% _raw_spin_lock_bh [kernel]
668.00 1.9% kmem_cache_free [kernel]
602.00 1.8% udp_recvmsg [kernel]
586.00 1.7% _raw_spin_lock [kernel]
585.00 1.7% vread_tsc [kernel].vsyscall_fn
-------------------------------------------------------------------------------
PerfTop: 3794 irqs/sec kernel:83.6% [1000Hz cycles], (all, 8 CPUs)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ___________________________ ____________________
4756.00 9.8% sky2_poll [sky2]
2742.00 5.7% _raw_spin_lock_irqsave [kernel]
1826.00 3.8% system_call [kernel]
1285.00 2.7% fget [kernel]
1284.00 2.7% copy_user_generic_string [kernel]
1235.00 2.6% _raw_spin_unlock_irqrestore [kernel]
1096.00 2.3% sys_epoll_ctl [kernel]
1071.00 2.2% datagram_poll [kernel]
954.00 2.0% kmem_cache_free [kernel]
925.00 1.9% _raw_spin_lock_bh [kernel]
888.00 1.8% vread_tsc [kernel].vsyscall_fn
880.00 1.8% udp_recvmsg [kernel]
793.00 1.6% _raw_spin_lock [kernel]
790.00 1.6% schedule [kernel]
-------------------------------------------------------------------------------
PerfTop: 1001 irqs/sec kernel:99.9% [1000Hz cycles], (all, cpu: 0)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ______________________ ________
675.00 32.6% sky2_poll [sky2]
116.00 5.6% __udp4_lib_lookup [kernel]
111.00 5.4% ip_route_input [kernel]
81.00 3.9% _raw_spin_lock_irqsave [kernel]
81.00 3.9% _raw_spin_lock [kernel]
70.00 3.4% __alloc_skb [kernel]
67.00 3.2% ip_rcv [kernel]
66.00 3.2% __netif_receive_skb [kernel]
61.00 2.9% __udp4_lib_rcv [kernel]
57.00 2.8% sock_queue_rcv_skb [kernel]
47.00 2.3% sock_def_readable [kernel]
42.00 2.0% __kmalloc [kernel]
42.00 2.0% __wake_up_common [kernel]
38.00 1.8% sky2_rx_submit [sky2]
-------------------------------------------------------------------------------
PerfTop: 1001 irqs/sec kernel:100.0% [1000Hz cycles], (all, cpu: 0)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ______________________ ________
2526.00 32.8% sky2_poll [sky2]
406.00 5.3% ip_route_input [kernel]
399.00 5.2% __udp4_lib_lookup [kernel]
328.00 4.3% _raw_spin_lock_irqsave [kernel]
307.00 4.0% _raw_spin_lock [kernel]
296.00 3.8% ip_rcv [kernel]
287.00 3.7% __alloc_skb [kernel]
272.00 3.5% sock_queue_rcv_skb [kernel]
224.00 2.9% __udp4_lib_rcv [kernel]
224.00 2.9% __netif_receive_skb [kernel]
182.00 2.4% sock_def_readable [kernel]
163.00 2.1% __wake_up_common [kernel]
140.00 1.8% sky2_rx_submit [sky2]
-------------------------------------------------------------------------------
PerfTop: 1001 irqs/sec kernel:100.0% [1000Hz cycles], (all, cpu: 0)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ______________________ ________
4445.00 33.4% sky2_poll [sky2]
707.00 5.3% __udp4_lib_lookup [kernel]
662.00 5.0% ip_route_input [kernel]
567.00 4.3% _raw_spin_lock_irqsave [kernel]
512.00 3.8% __alloc_skb [kernel]
506.00 3.8% ip_rcv [kernel]
476.00 3.6% sock_queue_rcv_skb [kernel]
473.00 3.6% _raw_spin_lock [kernel]
415.00 3.1% __udp4_lib_rcv [kernel]
408.00 3.1% __netif_receive_skb [kernel]
306.00 2.3% sock_def_readable [kernel]
272.00 2.0% __wake_up_common [kernel]
260.00 2.0% __kmalloc [kernel]
216.00 1.6% _raw_read_lock [kernel]
214.00 1.6% sky2_rx_submit [sky2]
-------------------------------------------------------------------------------
PerfTop: 748 irqs/sec kernel:80.9% [1000Hz cycles], (all, cpu: 1)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ___________________________ ____________________
244.00 7.4% _raw_spin_lock_irqsave [kernel]
207.00 6.2% system_call [kernel]
127.00 3.8% _raw_spin_unlock_irqrestore [kernel]
124.00 3.7% copy_user_generic_string [kernel]
122.00 3.7% sys_epoll_ctl [kernel]
120.00 3.6% fget [kernel]
118.00 3.6% datagram_poll [kernel]
96.00 2.9% schedule [kernel]
94.00 2.8% _raw_spin_lock_bh [kernel]
86.00 2.6% vread_tsc [kernel].vsyscall_fn
82.00 2.5% udp_recvmsg [kernel]
76.00 2.3% fput [kernel]
73.00 2.2% kmem_cache_free [kernel]
67.00 2.0% sys_epoll_wait [kernel]
-------------------------------------------------------------------------------
PerfTop: 625 irqs/sec kernel:78.6% [1000Hz cycles], (all, cpu: 1)
-------------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ___________________________ ____________________
488.00 7.5% _raw_spin_lock_irqsave [kernel]
380.00 5.9% system_call [kernel]
274.00 4.2% copy_user_generic_string [kernel]
252.00 3.9% fget [kernel]
244.00 3.8% datagram_poll [kernel]
217.00 3.3% _raw_spin_unlock_irqrestore [kernel]
211.00 3.3% sys_epoll_ctl [kernel]
186.00 2.9% schedule [kernel]
185.00 2.9% _raw_spin_lock_bh [kernel]
173.00 2.7% udp_recvmsg [kernel]
169.00 2.6% vread_tsc [kernel].vsyscall_fn
164.00 2.5% kmem_cache_free [kernel]
143.00 2.2% fput [kernel]
133.00 2.1% sys_epoll_wait [kernel]
IV: Test setup
nn-cl-rps: Basic net-next from Apr23 + Changli patch + rps mask ee,irq aff
--------------------------------------------------------------------------
PerfTop: 3043 irqs/sec kernel:87.5% [1000Hz cycles], (all, 8 CPUs)
--------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ __________________________ ____________________
2240.00 20.4% sky2_poll [sky2]
375.00 3.4% _raw_spin_lock_irqsave [kernel]
335.00 3.0% sky2_intr [sky2]
326.00 3.0% system_call [kernel]
239.00 2.2% _raw_spin_unlock_irqrestor [kernel]
224.00 2.0% ip_rcv [kernel]
201.00 1.8% __netif_receive_skb [kernel]
198.00 1.8% sys_epoll_ctl [kernel]
190.00 1.7% _raw_spin_lock [kernel]
182.00 1.7% fget [kernel]
169.00 1.5% copy_user_generic_string [kernel]
165.00 1.5% kmem_cache_free [kernel]
149.00 1.4% load_balance [kernel]
146.00 1.3% ip_route_input [kernel]
--------------------------------------------------------------------------
PerfTop: 3210 irqs/sec kernel:85.8% [1000Hz cycles], (all, 8 CPUs)
--------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ __________________________ ____________________
6539.00 20.4% sky2_poll [sky2]
1106.00 3.4% _raw_spin_lock_irqsave [kernel]
1014.00 3.2% sky2_intr [sky2]
976.00 3.0% system_call [kernel]
684.00 2.1% _raw_spin_unlock_irqrestor [kernel]
611.00 1.9% ip_rcv [kernel]
601.00 1.9% fget [kernel]
593.00 1.8% _raw_spin_lock [kernel]
592.00 1.8% sys_epoll_ctl [kernel]
574.00 1.8% __netif_receive_skb [kernel]
526.00 1.6% copy_user_generic_string [kernel]
482.00 1.5% kmem_cache_free [kernel]
480.00 1.5% ip_route_input [kernel]
425.00 1.3% vread_tsc [kernel].vsyscall_fn
410.00 1.3% kmem_cache_alloc [kernel]
--------------------------------------------------------------------------
PerfTop: 999 irqs/sec kernel:97.2% [1000Hz cycles], (all, cpu: 0)
--------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ___________________________ ________
2035.00 60.5% sky2_poll [sky2]
302.00 9.0% sky2_intr [sky2]
109.00 3.2% __alloc_skb [kernel]
57.00 1.7% _raw_spin_lock [kernel]
57.00 1.7% get_rps_cpu [kernel]
52.00 1.5% __kmalloc [kernel]
51.00 1.5% enqueue_to_backlog [kernel]
49.00 1.5% _raw_spin_lock_irqsave [kernel]
44.00 1.3% kmem_cache_alloc [kernel]
34.00 1.0% sky2_rx_submit [sky2]
33.00 1.0% swiotlb_sync_single [kernel]
31.00 0.9% system_call [kernel]
28.00 0.8% irq_entries_start [kernel]
22.00 0.7% _raw_spin_unlock_irqrestore [kernel]
21.00 0.6% sky2_remove [sky2]
--------------------------------------------------------------------------
PerfTop: 1000 irqs/sec kernel:96.2% [1000Hz cycles], (all, cpu: 0)
--------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ___________________________ ________
5493.00 60.1% sky2_poll [sky2]
803.00 8.8% sky2_intr [sky2]
281.00 3.1% __alloc_skb [kernel]
233.00 2.6% get_rps_cpu [kernel]
136.00 1.5% enqueue_to_backlog [kernel]
132.00 1.4% __kmalloc [kernel]
126.00 1.4% _raw_spin_lock [kernel]
122.00 1.3% kmem_cache_alloc [kernel]
122.00 1.3% _raw_spin_lock_irqsave [kernel]
102.00 1.1% swiotlb_sync_single [kernel]
88.00 1.0% sky2_rx_submit [sky2]
77.00 0.8% system_call [kernel]
69.00 0.8% irq_entries_start [kernel]
55.00 0.6% _raw_spin_unlock_irqrestore [kernel]
54.00 0.6% copy_user_generic_string [kernel]
--------------------------------------------------------------------------
PerfTop: 999 irqs/sec kernel:97.5% [1000Hz cycles], (all, cpu: 0)
--------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ ___________________________ ________
6699.00 60.1% sky2_poll [sky2]
988.00 8.9% sky2_intr [sky2]
327.00 2.9% __alloc_skb [kernel]
261.00 2.3% get_rps_cpu [kernel]
168.00 1.5% __kmalloc [kernel]
161.00 1.4% kmem_cache_alloc [kernel]
160.00 1.4% enqueue_to_backlog [kernel]
157.00 1.4% _raw_spin_lock [kernel]
125.00 1.1% _raw_spin_lock_irqsave [kernel]
122.00 1.1% swiotlb_sync_single [kernel]
114.00 1.0% sky2_rx_submit [sky2]
96.00 0.9% system_call [kernel]
85.00 0.8% irq_entries_start [kernel]
66.00 0.6% sky2_remove [sky2]
64.00 0.6% _raw_spin_unlock_irqrestore [kernel]
--------------------------------------------------------------------------
PerfTop: 420 irqs/sec kernel:84.8% [1000Hz cycles], (all, cpu: 2)
--------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ __________________________ ____________________
188.00 4.8% _raw_spin_lock_irqsave [kernel]
175.00 4.5% system_call [kernel]
155.00 4.0% _raw_spin_unlock_irqrestor [kernel]
143.00 3.7% __netif_receive_skb [kernel]
124.00 3.2% ip_route_input [kernel]
122.00 3.1% fget [kernel]
118.00 3.0% ip_rcv [kernel]
115.00 2.9% sys_epoll_ctl [kernel]
107.00 2.7% call_function_single_inter [kernel]
98.00 2.5% vread_tsc [kernel].vsyscall_fn
97.00 2.5% _raw_spin_lock [kernel]
89.00 2.3% copy_user_generic_string [kernel]
--------------------------------------------------------------------------
PerfTop: 372 irqs/sec kernel:87.9% [1000Hz cycles], (all, cpu: 2)
--------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ __________________________ ____________________
212.00 4.6% _raw_spin_lock_irqsave [kernel]
192.00 4.2% system_call [kernel]
187.00 4.1% __netif_receive_skb [kernel]
184.00 4.0% ip_rcv [kernel]
174.00 3.8% ip_route_input [kernel]
165.00 3.6% _raw_spin_unlock_irqrestor [kernel]
143.00 3.1% call_function_single_inter [kernel]
135.00 3.0% fget [kernel]
133.00 2.9% sys_epoll_ctl [kernel]
122.00 2.7% _raw_spin_lock [kernel]
112.00 2.5% __udp4_lib_lookup [kernel]
99.00 2.2% copy_user_generic_string [kernel]
93.00 2.0% vread_tsc [kernel].vsyscall_fn
90.00 2.0% kmem_cache_free [kernel]
89.00 1.9% ep_remove [kernel]
o
--------------------------------------------------------------------------
PerfTop: 269 irqs/sec kernel:85.1% [1000Hz cycles], (all, cpu: 7)
--------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ __________________________ ____________________
23.00 4.6% _raw_spin_lock_irqsave [kernel]
21.00 4.2% system_call [kernel]
19.00 3.8% _raw_spin_unlock_irqrestor [kernel]
17.00 3.4% fget [kernel]
15.00 3.0% __netif_receive_skb [kernel]
14.00 2.8% dst_release [kernel]
13.00 2.6% call_function_single_inter [kernel]
11.00 2.2% kmem_cache_free [kernel]
10.00 2.0% vread_tsc [kernel].vsyscall_fn
10.00 2.0% copy_user_generic_string [kernel]
10.00 2.0% ktime_get [kernel]
10.00 2.0% ip_route_input [kernel]
10.00 2.0% schedule [kernel]
--------------------------------------------------------------------------
PerfTop: 253 irqs/sec kernel:84.6% [1000Hz cycles], (all, cpu: 7)
--------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ __________________________ ____________________
109.00 4.9% system_call [kernel]
104.00 4.6% _raw_spin_lock_irqsave [kernel]
79.00 3.5% ip_rcv [kernel]
74.00 3.3% _raw_spin_unlock_irqrestor [kernel]
71.00 3.2% fget [kernel]
68.00 3.0% sys_epoll_ctl [kernel]
66.00 2.9% ip_route_input [kernel]
58.00 2.6% call_function_single_inter [kernel]
55.00 2.4% _raw_spin_lock [kernel]
54.00 2.4% copy_user_generic_string [kernel]
53.00 2.4% __netif_receive_skb [kernel]
51.00 2.3% schedule [kernel]
51.00 2.3% kmem_cache_free [kernel]
43.00 1.9% vread_tsc [kernel].vsyscall_fn
38.00 1.7% __udp4_lib_lookup [kernel]
--------------------------------------------------------------------------
PerfTop: 236 irqs/sec kernel:84.3% [1000Hz cycles], (all, cpu: 7)
--------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ __________________________ ____________________
131.00 4.9% _raw_spin_lock_irqsave [kernel]
128.00 4.8% system_call [kernel]
101.00 3.8% _raw_spin_unlock_irqrestor [kernel]
89.00 3.3% fget [kernel]
85.00 3.2% sys_epoll_ctl [kernel]
81.00 3.0% ip_rcv [kernel]
76.00 2.8% ip_route_input [kernel]
66.00 2.5% call_function_single_inter [kernel]
65.00 2.4% _raw_spin_lock [kernel]
65.00 2.4% kmem_cache_free [kernel]
64.00 2.4% copy_user_generic_string [kernel]
57.00 2.1% __netif_receive_skb [kernel]
47.00 1.8% schedule [kernel]
45.00 1.7% vread_tsc [kernel].vsyscall_fn
--------------------------------------------------------------------------
PerfTop: 478 irqs/sec kernel:82.2% [1000Hz cycles], (all, cpu: 2)
--------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ __________________________ ____________________
319.00 5.2% _raw_spin_lock_irqsave [kernel]
289.00 4.7% system_call [kernel]
246.00 4.0% _raw_spin_unlock_irqrestor [kernel]
199.00 3.2% ip_route_input [kernel]
198.00 3.2% __netif_receive_skb [kernel]
197.00 3.2% sys_epoll_ctl [kernel]
183.00 3.0% ip_rcv [kernel]
182.00 2.9% fget [kernel]
166.00 2.7% call_function_single_inter [kernel]
157.00 2.5% copy_user_generic_string [kernel]
149.00 2.4% kmem_cache_free [kernel]
146.00 2.4% vread_tsc [kernel].vsyscall_fn
133.00 2.1% _raw_spin_lock [kernel]
118.00 1.9% schedule [kernel]
112.00 1.8% __udp4_lib_lookup [kernel]
--------------------------------------------------------------------------
PerfTop: 535 irqs/sec kernel:83.0% [1000Hz cycles], (all, cpu: 2)
--------------------------------------------------------------------------
samples pcnt function DSO
_______ _____ __________________________ ____________________
345.00 5.2% _raw_spin_lock_irqsave [kernel]
291.00 4.4% system_call [kernel]
255.00 3.9% _raw_spin_unlock_irqrestor [kernel]
218.00 3.3% fget [kernel]
201.00 3.0% ip_route_input [kernel]
193.00 2.9% __netif_receive_skb [kernel]
193.00 2.9% sys_epoll_ctl [kernel]
180.00 2.7% ip_rcv [kernel]
173.00 2.6% call_function_single_inter [kernel]
163.00 2.5% copy_user_generic_string [kernel]
152.00 2.3% kmem_cache_free [kernel]
151.00 2.3% vread_tsc [kernel].vsyscall_fn
142.00 2.1% _raw_spin_lock [kernel]
131.00 2.0% schedule [kernel]
^ permalink raw reply
* Re: [PATCH] e100: Fix the TX workqueue race
From: Alan Cox @ 2010-04-24 11:11 UTC (permalink / raw)
To: David Miller; +Cc: netdev, e1000-devel
In-Reply-To: <20100423.163545.157549100.davem@davemloft.net>
On Fri, 23 Apr 2010 16:35:45 -0700 (PDT)
David Miller <davem@davemloft.net> wrote:
> From: David Miller <davem@davemloft.net>
> Date: Fri, 23 Apr 2010 16:31:27 -0700 (PDT)
>
> > I'll apply this to net-2.6, thanks Alan.
>
> Nevermind...
>
> Doesn't apply to net-2.6, but even when I fix that up it doesn't
> even compile. There is no 'dev' variable present etc.
>
> You even use a combination of "dev" and "netdev" in the resulting
> code block.
>
> If it doesn't even build, I doubt it's been tested either.
No idea why it won't apply - I guess net has diverged from -next in
this area. Other problem is not typing "stg ref" before "stg export"
(If it doesn't apply I'll look at it next weekend when -next and -net ought to be back in sync ?)
commit 526fb792b745da7c9532725a1a6ecc83a01110cf
Author: Alan Cox <alan@linux.intel.com>
Date: Sat Apr 24 12:09:23 2010 +0100
e100: Fix the TX workqueue race
Nothing stops the workqueue being left to run in parallel with close or a
few other operations. This causes double unmaps and the like.
See kerneloops.org #1041230 for an example
Signed-off-by: Alan Cox <alan@linux.intel.com>
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 3e8d000..ef97bfc 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -168,6 +168,7 @@
#include <linux/ethtool.h>
#include <linux/string.h>
#include <linux/firmware.h>
+#include <linux/rtnetlink.h>
#include <asm/unaligned.h>
@@ -2280,8 +2281,13 @@ static void e100_tx_timeout_task(struct work_struct *work)
netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev,
"scb.status=0x%02X\n", ioread8(&nic->csr->scb.status));
- e100_down(netdev_priv(netdev));
- e100_up(netdev_priv(netdev));
+
+ rtnl_lock();
+ if (netif_running(netdev)) {
+ e100_down(netdev_priv(netdev));
+ e100_up(netdev_priv(netdev));
+ }
+ rtnl_unlock();
}
static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode)
^ permalink raw reply related
* PCI runtime power management for r8169
From: Markus Feldmann @ 2010-04-24 11:30 UTC (permalink / raw)
To: netdev
Hi all,
as i read in this mailing list, there is/will be a power management for
the r8169 driver?! I have the following devices:
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
04:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
04:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
04:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8110SC/8169SC Gigabit Ethernet (rev 10)
Not all of them are used at the same time. So how can i put the unused
in a low power state?
regards Markus
^ permalink raw reply
* Re: DDoS attack causing bad effect on conntrack searches
From: Jesper Dangaard Brouer @ 2010-04-24 11:11 UTC (permalink / raw)
To: Eric Dumazet
Cc: paulmck, Patrick McHardy, Changli Gao, hawk,
Linux Kernel Network Hackers, Netfilter Developers
In-Reply-To: <1272056237.4599.7.camel@edumazet-laptop>
[-- Attachment #1: Type: TEXT/PLAIN, Size: 4506 bytes --]
On Fri, 23 Apr 2010, Eric Dumazet wrote:
> Le jeudi 22 avril 2010 à 22:38 +0200, Jesper Dangaard Brouer a écrit :
>
>>
>> I think its plausable, there is a lot of modification going on.
>> Approx 40.000 deletes/sec and 40.000 inserts/sec.
>> The hash bucket size is 300032, and with 80000 modifications/sec, we are
>> (potentially) changing 26.6% of the hash chains each second.
>>
>> As can be seen from the graphs:
>> http://people.netfilter.org/hawk/DDoS/2010-04-12__001/list.html
>>
>> Notice that primarily CPU2 is doing the 40k deletes/sec, while CPU1 is
>> caught searching...
>>
>>
>>> maybe hash table has one slot :)
>>
>> Guess I have to reproduce the DoS attack in a testlab (I will first have
>> time Tuesday). So we can determine if its bad hashing or restart of the
>> search loop.
>>
>>
>> The traffic pattern was fairly simple:
>>
>> 200 bytes UDP packets, comming from approx 60 source IPs, going to one
>> destination IP. The UDP destination port number was varied in the range
>> of 1 to 6000. The source UDP port was varied a bit more, some ranging
>> from 32768 to 61000, and some from 1028 to 5000.
>>
>>
>
> Re-reading this, I am not sure there is a real problem on RCU as you
> pointed out.
>
> With 800.000 entries, in a 300.032 buckets hash table, each lookup hit
> about 3 entries (aka searches in conntrack stats)
>
> 300.000 packets/second -> 900.000 'searches' per second.
The machine is not getting 300.000 pps, its only getting 40.000 pps (the
rest is stopped by the NIC by sending Ethernet flowcontrol pause frames)
http://people.netfilter.org/hawk/DDoS/2010-04-12__001/eth0-rx.png
We are doing 700.000 'searches' per second, with 40.000 pps, thus on
average the list lenght (in each hash bucket) just need to be 17.5
elements. Is this an acceptable has distribution, with 900.000 elements
in a 300.032 buckets hash table?
> If you have four cpus all trying to insert/delete entries in //, they
> all hit the central conntrack lock.
This machine only have two CPUs, or rather one physical CPU and one
hyperthreaded. The server is a old HP380 G4, with an old Xeon type CPU
3.4 GHz (1MB cache). If remember correctly its based on Pentium-4
technologi, which had a pretty bad hyperthreading.
> On a DDOS scenario, every packet needs to take this lock twice,
> once to free an old conntrack (early drop), once to insert a new entry.
I was worried about if the "early drop" e.g. free an old conntrack would
disturbe the conntrack searching?
> To scale this, only way would be to have an array of locks, like we have
> for TCP/UDP hash tables.
>
> I did some tests here, with a multiqueue card, flooded with 300.000
> pack/second, 65.536 source IP, millions of flows, and nothing wrong
> happened (but packets drops, of course)
A small hint when testing, use Haralds tool 'lnstat' to see the stats on
the command line, thus you don't need to RRDtool graphe every thing:
Command:
lnstat -f nf_conntrack -i 1 -c 1000
I don't have a multiqueue NIC in this old machine.
I also ran some tests on my 10G testlab, but it didn't go wrong.
Tweeking the pktgen DDoS I could get the system to do 4.500.000 'searches'
per sec with a 1.500.000 packets/sec. (Have not reloaded the kernel with
the new failed lookup stats). Guess my 10G machines are too fast to hit
the issues.
> My two cpus were busy 100%, after tweaking smp_affinities, because on
> first try, irqbalance put "01" mask on both queues, so only one ksoftirq
> was working, other cpu was idle :(
Think my machine is some what slower than yours, perhaps its simply not
fast enough for this kind of workload (pretty sure that the cache is the
CPU is getting f*ked in this case).
On my machine one CPU in stuck in softirq:
http://people.netfilter.org/hawk/DDoS/2010-04-12__001/cpu_softirq001.png
And another observation is that the CPUs are disturbing each other on the
RX softirq code path.
http://people.netfilter.org/hawk/DDoS/2010-04-12__001/softnet_time_squeeze_rx-softirq001.png
(/proc/net/softnet_stat column 3)
Monday or Tuesdag I'll do a test setup with some old HP380 G4 machines to
see if I can reproduce the DDoS attack senario. And see if I can get
it into to lookup loop.
Hilsen
Jesper Brouer
--
-------------------------------------------------------------------
MSc. Master of Computer Science
Dept. of Computer Science, University of Copenhagen
Author of http://www.adsl-optimizer.dk
-------------------------------------------------------------------
^ permalink raw reply
* Re: [PATCH] e100: Fix the TX workqueue race
From: Alan Cox @ 2010-04-24 10:36 UTC (permalink / raw)
To: David Miller; +Cc: e1000-devel, netdev
In-Reply-To: <20100423.163545.157549100.davem@davemloft.net>
On Fri, 23 Apr 2010 16:35:45 -0700 (PDT)
David Miller <davem@davemloft.net> wrote:
> From: David Miller <davem@davemloft.net>
> Date: Fri, 23 Apr 2010 16:31:27 -0700 (PDT)
>
> > I'll apply this to net-2.6, thanks Alan.
>
> Nevermind...
>
> Doesn't apply to net-2.6, but even when I fix that up it doesn't
> even compile. There is no 'dev' variable present etc.
>
> You even use a combination of "dev" and "netdev" in the resulting
> code block.
>
> If it doesn't even build, I doubt it's been tested either.
Puzzling as it came from a building -next tree. Will see whats happened
next week if I get time, but I'm afraid net stuff isn't a priority - in
fact its disappointing that having diagnosed a bug months ago (which
was the hard bit) and posted a test patch months ago the maintainers
haven't fixed it.
Alan
------------------------------------------------------------------------------
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
^ permalink raw reply
* Re: [net-next-2.6 PATCH 1/2] Add ndo_set_vf_port_profile
From: David Miller @ 2010-04-24 7:19 UTC (permalink / raw)
To: scofeldm; +Cc: netdev, chrisw, arnd
In-Reply-To: <20100424003540.12745.81403.stgit@savbu-pc100.cisco.com>
From: Scott Feldman <scofeldm@cisco.com>
Date: Fri, 23 Apr 2010 17:35:41 -0700
> +
> +struct ifla_vf_port_profile {
> + __u32 vf;
> + __u8 port_profile[64];
> + __u8 mac[32];
> + __u8 host_uuid[64]; /* e.g. "CEEFD3B1-9E11-11DE-BDFD-000BAB01C0FB" */
> + __u8 client_uuid[64];
> + __u8 client_name[64]; /* e.g. "vm0-eth1" */
> +};
> +
Please define some macros to represent the string sizes.
;
> int (*ndo_set_vf_tx_rate)(struct net_device *dev,
> int vf, int rate);
> + int (*ndo_set_vf_port_profile)(
> + struct net_device *dev, int vf,
> + u8 *port_profile, u8 *mac,
> + u8 *host_uuid,
> + u8 *client_uuid,
> + u8 *client_name);
> int (*ndo_get_vf_config)(struct net_device *dev,
Just pass the "struct ifla_vf_port_profile *" instead of tons of
arguments.
Also, I think it's reasonable to fetch the current profile in use, so
GETLINK ought to report these things. To make it generic we can
maintain the settings given to us in software, hung off of the netdev
struct, and simply report that during GETLINK.
In fact, in general, anything that can be "set" should always be
available from a "get".
^ permalink raw reply
* Re: [GIT PULL net-next-2.6 (TAKE 4)] MLD Snooping
From: David Miller @ 2010-04-24 6:44 UTC (permalink / raw)
To: yoshfuji; +Cc: netdev, shemminger
In-Reply-To: <201004230501.o3N51MA8008837@94.43.138.210.xn.2iij.net>
From: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Date: Fri, 23 Apr 2010 14:01:22 +0900
> Please consider pulling following changes since commit
> efe91932e79cfe59a562b70d8eb18049b36debc6
> sky2: size status ring based on Tx/Rx ring
> at
> git://git.linux-ipv6.org/gitroot/yoshfuji/linux-2.6-next.git net-next-2.6_20100423a/br/br_multicast_v3
Pulled, thank you.
^ permalink raw reply
* Re: [PATCH 0/3] IPv6: Add IPV6_RECVPATHMTU, IPV6_PATHMTU and IPV6_DONTFRAG support
From: David Miller @ 2010-04-24 6:36 UTC (permalink / raw)
To: brian.haley; +Cc: yoshfuji, netdev
In-Reply-To: <1272057969-6526-1-git-send-email-brian.haley@hp.com>
From: Brian Haley <brian.haley@hp.com>
Date: Fri, 23 Apr 2010 17:26:06 -0400
> This series adds support for IPV6_RECVPATHMTU, IPV6_PATHMTU, and
> IPV6_DONTFRAG socket options as defined in RFC 3542.
Nice work, applied to net-next-2.6, thanks Brian!
^ permalink raw reply
* Re: [PATCH 1/4] e1000e: save skb counts in TX to avoid cache misses
From: David Miller @ 2010-04-24 6:30 UTC (permalink / raw)
To: therbert
Cc: netdev, jeffrey.t.kirsher, jesse.brandeburg, bruce.w.allan,
alexander.h.duyck, peter.p.waskiewicz.jr, john.ronciak
In-Reply-To: <alpine.DEB.1.00.1004231719050.16806@pokey.mtv.corp.google.com>
Intel folks, please integrate Tom's patches.
Tom, please always CC: the developers listed in MAINTAINERS
for the driver you are submitting patches to.
Thanks.
^ permalink raw reply
* Re: eSwitch management
From: Anirban Chakraborty @ 2010-04-24 6:21 UTC (permalink / raw)
To: Chris Wright
Cc: Scott Feldman, David Miller, netdev@vger.kernel.org,
Arnd Bergmann, Ameen Rahman, Amit Salecha, Rajesh Borundia,
shemminger@vyatta.com
In-Reply-To: <20100423230438.GC3843@x200.localdomain>
On Apr 23, 2010, at 4:04 PM, Chris Wright wrote:
> * Anirban Chakraborty (anirban.chakraborty@qlogic.com) wrote:
>>
>> On Apr 23, 2010, at 12:44 PM, Chris Wright wrote:
>>
>>> * Anirban Chakraborty (anirban.chakraborty@qlogic.com) wrote:
>>>> On Apr 23, 2010, at 9:23 AM, Chris Wright wrote:
>>>>> * Anirban Chakraborty (anirban.chakraborty@qlogic.com) wrote:
>>>>>> It looks like ifla_vf_info does contain most of the data set. But if I use it, what NETLINK protocol family should I use in my driver to receive netlink messages? Do I need to create a private protocol family?
>>>>>
>>>>> No, you don't need to use netlink in your driver. You just need to fill
>>>>> in the relevant net_device_ops in your driver init. Specifically:
>>>>>
>>>>> * SR-IOV management functions.
>>>>> * int (*ndo_set_vf_mac)(struct net_device *dev, int vf, u8* mac);
>>>>> * int (*ndo_set_vf_vlan)(struct net_device *dev, int vf, u16 vlan, u8 qos);
>>>>> * int (*ndo_set_vf_tx_rate)(struct net_device *dev, int vf, int rate);
>>>>> * int (*ndo_get_vf_config)(struct net_device *dev,
>>>>> * int vf, struct ifla_vf_info *ivf);
>>>>>
>>>>> These are all operating on a VF indexed internally w/in the driver, so it's
>>>>> a little cumbersome to use from userspace.
>>>>
>>>> These are all intended for VFs and are configureable from PF.
>>>
>>> Yes, and while the set of callbacks can change, they are always tied to
>>> some net_device (typically the PF) that knows how to make hardware
>>> settings on behalf of a VF.
>>>
>>>> However, in our case, there are multiple physical NIC function on a
>>>> port which are configureable by the eswitch.
>>>
>>> Is there a PCI function that represents the switch? Or a special PCI
>>> NIC function that has VEB mgmt plane access? And do you have examples
>>> of configuration that you'll do here?
>>
>> There is no PCI function that represents the switch. However, one
>> of the NIC functions can act as a privileged function to configure the
>> eswitch. Typically the first NIC function that is enumerated in the bus
>> manages the eswitch. Typical configurations would be to set tx bandwidth,
>> VLAN ID, MAC address, promiscuous mode setting for each of these ports
>> at the start of the day. This is useful in virtualization scenario where
>> we can do PCI passthru of the functions to the guest and these settings
>> for the guest are configured via the driver in the host.
>
> (btw, this is not uncommon, there other adapters that have multiple
> functions for a single physical port that is not SR-IOV based)
>
> How does the privileged function identify the other functions? IOW, the
> existing SR-IOV ndo callbacks have most of the above (tx bw control, mac,
> vlan id), and have an 'int vf' which is basically just a driver specific
> identifier to a non-privileged function or set of hw resources. It looks
> like you can use the existing bits (just need to expand a little).
>
> So far we have only:
>
> - tx bw control
> - set mac addr
> - set vlan id
>
> You've additionally identified:
>
> - set promiscuous mode
>
> I'm also aware of:
>
> - setting port aggregation
> - issuing a function reset
> - setting port mirroring or bcast/mcast replication
> - setting anti-spoofing (mac/vlan..)
> - setting security/filtering
> - getting port statistics
> - ...whatever else I'm forgetting
Scott's latest patch already addressed some of these. May be we should add the missing pieces, e.g. setting promiscuous mode, port mirroring etc. from the above list to ndo_ops. Function reset should be handled via FLR.
>
>> <snip>
>>>
>>> One idea that has been discussed in the past is to create essentially
>>> a pluggable set of bridge_ops. The first step would be purely internal
>>> shuffling, to make the existing sw bridge code go through the bridge_ops.
>>> The second step would be making your driver for whichever PCI function
>>> you have that supports managing the bridge create a net_device which is
>>> a bridge during driver init. And now normal brctl can call into your
>>> VEB via the bridge_ops callbacks. </handwave>
>>>
>> I liked the idea of iovnl as it works by utilizing port profile. That way the eswitch can be configured with the same port profile that a vswitch in a hypervisor has.
>
> I don't quite follow you here.
If I am not mistaken, port profile is supposed to keep configuration data of a NIC port and a software vswitch typically residing at the host uses it. When there are multiple physical NICs (on the same physical port) in the hypervisor, there are multiple vswitches created for each of the pNICs. The inter vm traffic in this case goes via the eswitch and thats where the eswitch configuration for these ports comes into picture.
thanks,
Anirban
^ permalink raw reply
* Re: [PATCH] RCU: don't turn off lockdep when find suspicious rcu_dereference_check() usage
From: Miles Lane @ 2010-04-24 5:35 UTC (permalink / raw)
To: paulmck
Cc: Vivek Goyal, Eric Paris, Lai Jiangshan, Ingo Molnar,
Peter Zijlstra, LKML, nauman, eric.dumazet, netdev, Jens Axboe,
Gui Jianfeng, Li Zefan
In-Reply-To: <m2xa44ae5cd1004231559hcf90671asf146a43b4748c2c3@mail.gmail.com>
2.6.34-rc5-git5 with all of your patches applied.
I reconfigured my kernel build options and got the following new issue:
[ 2.686515] [ INFO: suspicious rcu_dereference_check() usage. ]
[ 2.686519] ---------------------------------------------------
[ 2.686523] kernel/cgroup.c:4438 invoked rcu_dereference_check()
without protection!
[ 2.686526]
[ 2.686527] other info that might help us debug this:
[ 2.686529]
[ 2.686532]
[ 2.686533] rcu_scheduler_active = 1, debug_locks = 1
[ 2.686537] 2 locks held by swapper/1:
[ 2.686540] #0: (mtd_table_mutex){+.+.+.}, at:
[<ffffffff812d7714>] register_mtd_blktrans+0xa2/0x25e
[ 2.686555] #1: (&(&blkcg->lock)->rlock){......}, at:
[<ffffffff811ca7bd>] blkiocg_add_blkio_group+0x29/0x7f
[ 2.686566]
[ 2.686567] stack backtrace:
[ 2.686572] Pid: 1, comm: swapper Not tainted 2.6.34-rc5-git5 #25
[ 2.686576] Call Trace:
[ 2.686584] [<ffffffff810642da>] lockdep_rcu_dereference+0x9d/0xa5
[ 2.686591] [<ffffffff8107af54>] css_id+0x3f/0x52
[ 2.686597] [<ffffffff811ca7cc>] blkiocg_add_blkio_group+0x38/0x7f
[ 2.686603] [<ffffffff811cc593>] cfq_init_queue+0xdf/0x2dc
[ 2.686609] [<ffffffff811bb858>] elevator_init+0xba/0xf5
[ 2.686616] [<ffffffff812d7046>] ? mtd_blktrans_request+0x0/0x1c
[ 2.686623] [<ffffffff811c0b62>] blk_init_queue_node+0x12f/0x135
[ 2.686629] [<ffffffff811c0b74>] blk_init_queue+0xc/0xe
[ 2.686635] [<ffffffff812d7777>] register_mtd_blktrans+0x105/0x25e
[ 2.686642] [<ffffffff818c0de9>] ? init_mtdblock+0x0/0x2c
[ 2.686648] [<ffffffff818c0e13>] init_mtdblock+0x2a/0x2c
[ 2.686656] [<ffffffff810001ef>] do_one_initcall+0x59/0x14e
[ 2.686663] [<ffffffff818986a6>] kernel_init+0x160/0x1ea
[ 2.686669] [<ffffffff81003814>] kernel_thread_helper+0x4/0x10
[ 2.686677] [<ffffffff8140d77c>] ? restore_args+0x0/0x30
[ 2.686683] [<ffffffff81898546>] ? kernel_init+0x0/0x1ea
[ 2.686688] [<ffffffff81003810>] ? kernel_thread_helper+0x0/0x10
[ 2.687683] mtdoops: mtd device (mtddev=name/number) must be supplied
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.34-rc5-git5
# Fri Apr 23 22:09:55 2010
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_EARLY_RES=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
CONFIG_RCU_TRACE=y
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
CONFIG_TREE_RCU_TRACE=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_OPTPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
# CONFIG_SLOW_WORK_DEBUG is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEBUG_CFQ_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_X2APIC=y
CONFIG_SPARSE_IRQ=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_IOMMU_API=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=4
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_KEXEC_JUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_RUNTIME=y
CONFIG_PM_OPS=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_POWER_METER=m
CONFIG_ACPI_SYSFS_POWER=y
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_HOTPLUG_MEMORY is not set
CONFIG_ACPI_SBS=y
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_DMAR=y
CONFIG_DMAR_DEFAULT_ON=y
CONFIG_DMAR_FLOPPY_WA=y
CONFIG_INTR_REMAP=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
# CONFIG_IPX is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_DEFAULT_PS is not set
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=m
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=0
CONFIG_MTD_TESTS=m
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_AR7_PARTS=m
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_HAVE_MTD_OTP=y
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_FTL=y
CONFIG_NFTL=y
# CONFIG_NFTL_RW is not set
CONFIG_INFTL=m
CONFIG_RFD_FTL=y
CONFIG_SSFDC=m
CONFIG_MTD_OOPS=y
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=y
CONFIG_MTD_ESB2ROM=y
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=y
CONFIG_MTD_NETtel=m
CONFIG_MTD_L440GX=y
CONFIG_MTD_INTEL_VR_NOR=y
CONFIG_MTD_PLATRAM=y
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ALAUDA=m
CONFIG_MTD_ONENAND=y
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
CONFIG_MTD_ONENAND_GENERIC=y
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=m
#
# LPDDR flash memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
CONFIG_MTD_UBI_GLUEBI=y
#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
# CONFIG_PARIDE_PT is not set
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
# CONFIG_PARIDE_ATEN is not set
# CONFIG_PARIDE_BPCK is not set
# CONFIG_PARIDE_COMM is not set
# CONFIG_PARIDE_DSTR is not set
# CONFIG_PARIDE_FIT2 is not set
# CONFIG_PARIDE_FIT3 is not set
# CONFIG_PARIDE_EPAT is not set
# CONFIG_PARIDE_EPIA is not set
# CONFIG_PARIDE_FRIQ is not set
# CONFIG_PARIDE_FRPW is not set
# CONFIG_PARIDE_KBIC is not set
# CONFIG_PARIDE_KTTI is not set
# CONFIG_PARIDE_ON20 is not set
# CONFIG_PARIDE_ON26 is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_CS5535_MFGPT is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=m
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
CONFIG_ATL1C=m
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_ATH_COMMON is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLWIFI=m
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
CONFIG_IWLAGN=m
# CONFIG_IWL4965 is not set
CONFIG_IWL5000=y
# CONFIG_IWL3945 is not set
# CONFIG_IWM is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_WL12XX is not set
# CONFIG_ZD1211RW is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_ASYNC is not set
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1366
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_MOUSE_GPIO=y
CONFIG_MOUSE_SYNAPTICS_I2C=y
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_WINBOND_CIR is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_TIMBERDALE=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_PRINTER is not set
CONFIG_PPDEV=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_HW_RANDOM_INTEL=m
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_VIA=m
CONFIG_NVRAM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_NFORCE2_S4985 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set
#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_IT8761E is not set
CONFIG_GPIO_SCH=m
#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_GPIO_TIMBERDALE is not set
#
# SPI GPIO expanders:
#
#
# AC97 GPIO expanders:
#
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
# CONFIG_W1_MASTER_GPIO is not set
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=m
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
CONFIG_MFD_TIMBERDALE=m
CONFIG_LPC_SCH=m
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_IR_CORE=m
CONFIG_VIDEO_IR=m
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_MT9V011=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_CX25840=m
# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
CONFIG_VIDEO_CPIA=m
# CONFIG_VIDEO_CPIA_PP is not set
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_MT9M001=m
CONFIG_SOC_CAMERA_MT9M111=m
CONFIG_SOC_CAMERA_MT9T031=m
CONFIG_SOC_CAMERA_MT9T112=m
CONFIG_SOC_CAMERA_MT9V022=m
CONFIG_SOC_CAMERA_RJ54N1=m
CONFIG_SOC_CAMERA_TW9910=m
# CONFIG_SOC_CAMERA_PLATFORM is not set
CONFIG_SOC_CAMERA_OV772X=m
CONFIG_SOC_CAMERA_OV9640=m
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
CONFIG_USB_M5602=m
CONFIG_USB_STV06XX=m
CONFIG_USB_GL860=m
CONFIG_USB_GSPCA_BENQ=m
CONFIG_USB_GSPCA_CONEX=m
CONFIG_USB_GSPCA_CPIA1=m
CONFIG_USB_GSPCA_ETOMS=m
CONFIG_USB_GSPCA_FINEPIX=m
CONFIG_USB_GSPCA_JEILINJ=m
CONFIG_USB_GSPCA_MARS=m
CONFIG_USB_GSPCA_MR97310A=m
CONFIG_USB_GSPCA_OV519=m
CONFIG_USB_GSPCA_OV534=m
CONFIG_USB_GSPCA_OV534_9=m
CONFIG_USB_GSPCA_PAC207=m
CONFIG_USB_GSPCA_PAC7302=m
CONFIG_USB_GSPCA_PAC7311=m
CONFIG_USB_GSPCA_SN9C2028=m
CONFIG_USB_GSPCA_SN9C20X=m
# CONFIG_USB_GSPCA_SN9C20X_EVDEV is not set
CONFIG_USB_GSPCA_SONIXB=m
CONFIG_USB_GSPCA_SONIXJ=m
CONFIG_USB_GSPCA_SPCA500=m
CONFIG_USB_GSPCA_SPCA501=m
CONFIG_USB_GSPCA_SPCA505=m
CONFIG_USB_GSPCA_SPCA506=m
CONFIG_USB_GSPCA_SPCA508=m
CONFIG_USB_GSPCA_SPCA561=m
CONFIG_USB_GSPCA_SQ905=m
CONFIG_USB_GSPCA_SQ905C=m
CONFIG_USB_GSPCA_STK014=m
CONFIG_USB_GSPCA_STV0680=m
CONFIG_USB_GSPCA_SUNPLUS=m
CONFIG_USB_GSPCA_T613=m
CONFIG_USB_GSPCA_TV8532=m
CONFIG_USB_GSPCA_VC032X=m
CONFIG_USB_GSPCA_ZC3XX=m
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_ALSA is not set
CONFIG_VIDEO_CX231XX=m
# CONFIG_VIDEO_CX231XX_ALSA is not set
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_OV511 is not set
CONFIG_USB_SE401=m
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
# CONFIG_USB_PWC_INPUT_EVDEV is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=m
CONFIG_HID_KYE=m
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LOGITECH=m
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=m
# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=m
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=m
CONFIG_HID_QUANTA=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB=m
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
CONFIG_USB_WHCI_HCD=m
CONFIG_USB_HWA_HCD=m
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=m
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIEMENS_MPI=m
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_VIVOPAY_SERIAL=m
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=m
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=m
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_UWB=m
CONFIG_UWB_HWA=m
CONFIG_UWB_WHCI=m
# CONFIG_UWB_WLP is not set
# CONFIG_UWB_I1480U is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
# CONFIG_MMC_RICOH_MMC is not set
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
CONFIG_LEDS_ALIX2=m
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_GPIO_PLATFORM=y
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_INTEL_SS4200=m
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH=y
CONFIG_INTEL_IOATDMA=m
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
CONFIG_ASUS_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
CONFIG_INTEL_MENLOW=m
CONFIG_EEEPC_LAPTOP=m
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=m
CONFIG_JBD_DEBUG=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_UBIFS_FS=m
# CONFIG_UBIFS_FS_XATTR is not set
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_KSYM_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_INTEL_TXT is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VHOST_NET is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox