* [GIT] net merged into net-next
From: David Miller @ 2012-06-13 5:18 UTC (permalink / raw)
To: netdev-u79uwXL29TY76Z2rM5mHXA
Cc: linville-2XuSBdqkA4R54TAoqtyWWQ,
linux-wireless-u79uwXL29TY76Z2rM5mHXA
John please double check my work as the only merge hassles
were wireless bits. I'm pretty sure I resolved things in
a reasonable way.
Thanks.
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* linux-next: manual merge of the akpm tree with the net tree
From: Stephen Rothwell @ 2012-06-13 5:27 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-next, linux-kernel, Stefan Roese, David Miller, netdev,
Viresh Kumar
[-- Attachment #1: Type: text/plain, Size: 5541 bytes --]
Hi Andrew,
Today's linux-next merge of the akpm tree got a conflict in
drivers/net/ethernet/stmicro/stmmac/stmmac.h between commit 883ffd6e6411
("net: stmmac: Fix clock en-/disable calls") from the net tree and commit
"net/stmmac: remove conditional compilation of clk code" from the akpm
tree.
I fixed it up (I think - see below) and can carry the fix as necessary.
--
Cheers,
Stephen Rothwell sfr@canb.auug.org.au
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index dc20c56..900c5e6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -82,9 +82,7 @@ struct stmmac_priv {
struct stmmac_counters mmc;
struct dma_features dma_cap;
int hw_cap_support;
-#ifdef CONFIG_HAVE_CLK
struct clk *stmmac_clk;
-#endif
int clk_csr;
int synopsys_id;
};
@@ -105,46 +103,6 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
struct plat_stmmacenet_data *plat_dat,
void __iomem *addr);
-#ifdef CONFIG_HAVE_CLK
-static inline int stmmac_clk_enable(struct stmmac_priv *priv)
-{
- if (!IS_ERR(priv->stmmac_clk))
- return clk_prepare_enable(priv->stmmac_clk);
-
- return 0;
-}
-
-static inline void stmmac_clk_disable(struct stmmac_priv *priv)
-{
- if (IS_ERR(priv->stmmac_clk))
- return;
-
- clk_disable_unprepare(priv->stmmac_clk);
-}
-static inline int stmmac_clk_get(struct stmmac_priv *priv)
-{
- priv->stmmac_clk = clk_get(priv->device, NULL);
-
- if (IS_ERR(priv->stmmac_clk))
- return PTR_ERR(priv->stmmac_clk);
-
- return 0;
-}
-#else
-static inline int stmmac_clk_enable(struct stmmac_priv *priv)
-{
- return 0;
-}
-static inline void stmmac_clk_disable(struct stmmac_priv *priv)
-{
-}
-static inline int stmmac_clk_get(struct stmmac_priv *priv)
-{
- return 0;
-}
-#endif /* CONFIG_HAVE_CLK */
-
-
#ifdef CONFIG_STMMAC_PLATFORM
extern struct platform_driver stmmac_pltfr_driver;
static inline int stmmac_register_platform(void)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 590e95b..bb63678 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -28,6 +28,7 @@
https://bugzilla.stlinux.com/
*******************************************************************************/
+#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/ip.h>
@@ -165,12 +166,8 @@ static void stmmac_verify_args(void)
static void stmmac_clk_csr_set(struct stmmac_priv *priv)
{
-#ifdef CONFIG_HAVE_CLK
u32 clk_rate;
- if (IS_ERR(priv->stmmac_clk))
- return;
-
clk_rate = clk_get_rate(priv->stmmac_clk);
/* Platform provided default clk_csr would be assumed valid
@@ -192,7 +189,6 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv)
* we can not estimate the proper divider as it is not known
* the frequency of clk_csr_i. So we do not change the default
* divider. */
-#endif
}
#if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG)
@@ -974,7 +970,7 @@ static int stmmac_open(struct net_device *dev)
} else
priv->tm->enable = 1;
#endif
- stmmac_clk_enable(priv);
+ clk_prepare_enable(priv->stmmac_clk);
stmmac_check_ether_addr(priv);
@@ -1078,7 +1074,7 @@ open_error:
if (priv->phydev)
phy_disconnect(priv->phydev);
- stmmac_clk_disable(priv);
+ clk_disable_unprepare(priv->stmmac_clk);
return ret;
}
@@ -1131,7 +1127,7 @@ static int stmmac_release(struct net_device *dev)
#ifdef CONFIG_STMMAC_DEBUG_FS
stmmac_exit_fs();
#endif
- stmmac_clk_disable(priv);
+ clk_disable_unprepare(priv->stmmac_clk);
return 0;
}
@@ -1926,11 +1922,14 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
ret = register_netdev(ndev);
if (ret) {
pr_err("%s: ERROR %i registering the device\n", __func__, ret);
- goto error;
+ goto error_netdev_register;
}
- if (stmmac_clk_get(priv))
+ priv->stmmac_clk = clk_get(priv->device, NULL);
+ if (IS_ERR(priv->stmmac_clk)) {
pr_warning("%s: warning: cannot get CSR clock\n", __func__);
+ goto error_clk_get;
+ }
/* If a specific clk_csr value is passed from the platform
* this means that the CSR Clock Range selection cannot be
@@ -1948,15 +1947,17 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device,
if (ret < 0) {
pr_debug("%s: MDIO bus (id: %d) registration failed",
__func__, priv->plat->bus_id);
- goto error;
+ goto error_mdio_register;
}
return priv;
-error:
- netif_napi_del(&priv->napi);
-
+error_mdio_register:
+ clk_put(priv->stmmac_clk);
+error_clk_get:
unregister_netdev(ndev);
+error_netdev_register:
+ netif_napi_del(&priv->napi);
free_netdev(ndev);
return NULL;
@@ -2025,7 +2026,7 @@ int stmmac_suspend(struct net_device *ndev)
else {
stmmac_set_mac(priv->ioaddr, false);
/* Disable clock in case of PWM is off */
- stmmac_clk_disable(priv);
+ clk_disable_unprepare(priv->stmmac_clk);
}
spin_unlock_irqrestore(&priv->lock, flags);
return 0;
@@ -2050,7 +2051,7 @@ int stmmac_resume(struct net_device *ndev)
priv->hw->mac->pmt(priv->ioaddr, 0);
else
/* enable the clk prevously disabled */
- stmmac_clk_enable(priv);
+ clk_prepare_enable(priv->stmmac_clk);
netif_device_attach(ndev);
[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply related
* [PATCH] netpoll: fix netpoll_send_udp() bugs
From: Eric Dumazet @ 2012-06-13 5:30 UTC (permalink / raw)
To: David Miller; +Cc: netdev, Bogdan Hamciuc, Herbert Xu, Neil Horman
From: Eric Dumazet <edumazet@google.com>
Bogdan Hamciuc diagnosed and fixed following bug in netpoll_send_udp() :
"skb->len += len;" instead of "skb_put(skb, len);"
Meaning that _if_ a network driver needs to call skb_realloc_headroom(),
only packet headers would be copied, leaving garbage in the payload.
However the skb_realloc_headroom() must be avoided as much as possible
since it requires memory and netpoll tries hard to work even if memory
is exhausted (using a pool of preallocated skbs)
It appears netpoll_send_udp() reserved 16 bytes for the ethernet header,
which happens to work for typicall drivers but not all.
Right thing is to use LL_RESERVED_SPACE(dev)
(And also add dev->needed_tailroom of tailroom)
This patch combines both fixes.
Many thanks to Bogdan for raising this issue.
Reported-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Neil Horman <nhorman@tuxdriver.com>
---
net/core/netpoll.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index 3d84fb9..f9f40b9 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -362,22 +362,23 @@ EXPORT_SYMBOL(netpoll_send_skb_on_dev);
void netpoll_send_udp(struct netpoll *np, const char *msg, int len)
{
- int total_len, eth_len, ip_len, udp_len;
+ int total_len, ip_len, udp_len;
struct sk_buff *skb;
struct udphdr *udph;
struct iphdr *iph;
struct ethhdr *eth;
udp_len = len + sizeof(*udph);
- ip_len = eth_len = udp_len + sizeof(*iph);
- total_len = eth_len + ETH_HLEN + NET_IP_ALIGN;
+ ip_len = udp_len + sizeof(*iph);
+ total_len = ip_len + LL_RESERVED_SPACE(np->dev);
- skb = find_skb(np, total_len, total_len - len);
+ skb = find_skb(np, total_len + np->dev->needed_tailroom,
+ total_len - len);
if (!skb)
return;
skb_copy_to_linear_data(skb, msg, len);
- skb->len += len;
+ skb_put(skb, len);
skb_push(skb, sizeof(*udph));
skb_reset_transport_header(skb);
^ permalink raw reply related
* Re: [PATCH 1/3] net: lpc_eth: Replace WARN() trace with simple pr_warn()
From: Eric Dumazet @ 2012-06-13 6:16 UTC (permalink / raw)
To: Roland Stigge
Cc: David Miller, netdev, linux-kernel, kevin.wells, srinivas.bakki,
aletes.xgr, linux-arm-kernel
In-Reply-To: <1339442328.6001.2602.camel@edumazet-glaptop>
On Mon, 2012-06-11 at 21:18 +0200, Eric Dumazet wrote:
> On Mon, 2012-06-11 at 11:26 +0200, Roland Stigge wrote:
>
> > Is it sensible at this point to increase the TX buffers anyway? For
> > different reasons of course: We have enough SRAM available and TX
> > buffers (16->32) are still more than RX buffers (48).
>
> I doubt it has any impact on performance for a 100Mbit link ?
>
> One thing that could be done would be to free skbs in
> lpc_eth_hard_start_xmit() instead of __lpc_handle_xmit()
>
Here is the patch I was thinking about
(on top of latest net-next)
Could you please test it ?
drivers/net/ethernet/nxp/lpc_eth.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
index 083d671..426f14c 100644
--- a/drivers/net/ethernet/nxp/lpc_eth.c
+++ b/drivers/net/ethernet/nxp/lpc_eth.c
@@ -440,7 +440,7 @@ struct netdata_local {
spinlock_t lock;
void __iomem *net_base;
u32 msg_enable;
- struct sk_buff *skb[ENET_TX_DESC];
+ unsigned int skblen[ENET_TX_DESC];
unsigned int last_tx_idx;
unsigned int num_used_tx_buffs;
struct mii_bus *mii_bus;
@@ -908,7 +908,7 @@ static void __lpc_handle_xmit(struct net_device *ndev)
txcidx = readl(LPC_ENET_TXCONSUMEINDEX(pldat->net_base));
while (pldat->last_tx_idx != txcidx) {
- skb = pldat->skb[pldat->last_tx_idx];
+ unsigned int skblen = pldat->skblen[pldat->last_tx_idx];
/* A buffer is available, get buffer status */
ptxstat = &pldat->tx_stat_v[pldat->last_tx_idx];
@@ -945,9 +945,8 @@ static void __lpc_handle_xmit(struct net_device *ndev)
} else {
/* Update stats */
ndev->stats.tx_packets++;
- ndev->stats.tx_bytes += skb->len;
+ ndev->stats.tx_bytes += skblen;
}
- dev_kfree_skb_irq(skb);
txcidx = readl(LPC_ENET_TXCONSUMEINDEX(pldat->net_base));
}
@@ -1132,7 +1131,7 @@ static int lpc_eth_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
memcpy(pldat->tx_buff_v + txidx * ENET_MAXF_SIZE, skb->data, len);
/* Save the buffer and increment the buffer counter */
- pldat->skb[txidx] = skb;
+ pldat->skblen[txidx] = len;
pldat->num_used_tx_buffs++;
/* Start transmit */
@@ -1147,6 +1146,7 @@ static int lpc_eth_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
spin_unlock_irq(&pldat->lock);
+ dev_kfree_skb(skb);
return NETDEV_TX_OK;
}
^ permalink raw reply related
* [net-next.git 0/4] EEE for PAL and stmmac (v2)
From: Giuseppe CAVALLARO @ 2012-06-13 7:17 UTC (permalink / raw)
To: netdev; +Cc: bhutchings, rayagond, davem, yuvalmin, Giuseppe Cavallaro
These patches add the EEE support in the stmmac device driver
restoring an old work I had done some months ago and not
completed in time.
I've tested all on ST STB with the IC+ 101G PHY device that has
this feature.
The initial EEE support for the stmmac has been written by Rayagond
but I have reworked all his code adding new parts and especially
performing tests on a real hardware. Thx Rayagond!
In these patches, we can see that the stmmac supports the EEE
only if the DMA HW capability register says that this
feature is actually available. In that case, the driver can enter
in the Tx LPI mode by using a timer as recommended by Synopsys.
Note that EEE is supported in new chip generations; in particular
I used the 3.61a.
At any rate, further information about how the driver treats the EEE
can be found in the stmmac.txt file (there is a patch for that).
Another patch is for Physical Abstraction Layer now able to
manage the MMD registers (clause 45); it also provides the ethtool
support to manage supported/advertisement/lp adv features.
Giuseppe Cavallaro (4):
phy: add the EEE support and the way to access to the MMD registers.
stmmac: do not use strict_strtoul but kstrtoul
stmmac: update the driver Documentation and add EEE
stmmac: add the Energy Efficient Ethernet support
Documentation/networking/stmmac.txt | 36 +++-
drivers/net/ethernet/stmicro/stmmac/common.h | 31 +++-
drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 20 ++
.../net/ethernet/stmicro/stmmac/dwmac1000_core.c | 101 +++++++-
.../net/ethernet/stmicro/stmmac/dwmac100_core.c | 4 +-
drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 10 +-
.../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 57 +++++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 233 ++++++++++++++----
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 2 +
drivers/net/phy/phy.c | 261 ++++++++++++++++++++
include/linux/mdio.h | 21 ++-
include/linux/mii.h | 9 +
include/linux/phy.h | 5 +
14 files changed, 725 insertions(+), 66 deletions(-)
--
1.7.4.4
^ permalink raw reply
* [net-next.git 1/4 (v5)] phy: add the EEE support and the way to access to the MMD registers.
From: Giuseppe CAVALLARO @ 2012-06-13 7:17 UTC (permalink / raw)
To: netdev; +Cc: bhutchings, rayagond, davem, yuvalmin, Giuseppe Cavallaro
In-Reply-To: <1339571827-7162-1-git-send-email-peppe.cavallaro@st.com>
This patch adds the support for the Energy-Efficient Ethernet (EEE)
to the Physical Abstraction Layer.
To support the EEE we have to access to the MMD registers 3.20 and
7.60/61. So two new functions have been added to read/write the MMD
registers (clause 45).
An Ethernet driver (I tested the stmmac) can invoke the phy_init_eee to properly
check if the EEE is supported by the PHYs and it can also set the clock
stop enable bit in the 3.0 register.
The phy_get_eee_err can be used for reporting the number of time where
the PHY failed to complete its normal wake sequence.
In the end, this patch also adds the EEE ethtool support implementing:
o phy_ethtool_set_eee
o phy_ethtool_get_eee
v1: initial patch
v2: fixed some errors especially on naming convention
v3: renamed again the mmd read/write functions thank to Ben's feedback
v4: moved file to phy.c and added the ethtool support.
v5: fixed phy_adv_to_eee, phy_eee_to_supported, phy_eee_to_adv return
values according to ethtool API (thanks to Ben's feedback).
Renamed some macros to avoid too long names.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
---
drivers/net/phy/phy.c | 261 +++++++++++++++++++++++++++++++++++++++++++++++++
include/linux/mdio.h | 21 +++-
include/linux/mii.h | 9 ++
include/linux/phy.h | 5 +
4 files changed, 292 insertions(+), 4 deletions(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 2e1c237..8935295 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -35,6 +35,7 @@
#include <linux/phy.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
+#include <linux/mdio.h>
#include <linux/atomic.h>
#include <asm/io.h>
@@ -967,3 +968,263 @@ void phy_state_machine(struct work_struct *work)
schedule_delayed_work(&phydev->state_queue, PHY_STATE_TIME * HZ);
}
+
+static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
+ int addr)
+{
+ /* Write the desired MMD Devad */
+ bus->write(bus, addr, MII_MMD_CTRL, devad);
+
+ /* Write the desired MMD register address */
+ bus->write(bus, addr, MII_MMD_DATA, prtad);
+
+ /* Select the Function : DATA with no post increment */
+ bus->write(bus, addr, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
+}
+
+/**
+ * phy_read_mmd_indirect - reads data from the MMC register (clause 22 to
+ * access to clause 45)
+ * @bus: the target MII bus
+ * @prtad: MMD Address
+ * @devad: MMD DEVAD
+ * @addr: PHY address on the MII bus
+ *
+ * Description: Reads data from the MMD regisetrs of the
+ * phy addr. To read these register we have:
+ * 1) Write reg 13 // DEVAD
+ * 2) Write reg 14 // MMD Address
+ * 3) Write reg 13 // MMD Data Command for MMD DEVAD
+ * 3) Read reg 14 // Read MMD data
+ */
+static int phy_read_mmd_indirect(struct mii_bus *bus, int prtad, int devad,
+ int addr)
+{
+ u32 ret;
+
+ mmd_phy_indirect(bus, prtad, devad, addr);
+
+ /* Read the content of the MMD's selected register */
+ ret = bus->read(bus, addr, MII_MMD_DATA);
+
+ return ret;
+}
+
+/**
+ * phy_write_mmd_indirect - writes data to the MMC register (clause 22 to
+ * access to clause 45)
+ * @bus: the target MII bus
+ * @prtad: MMD Address
+ * @devad: MMD DEVAD
+ * @addr: PHY address on the MII bus
+ * @data: data to write in the MMD register
+ *
+ * Description: Reads data from the MMD regisetrs of the
+ * phy addr. To read these register we have:
+ * 1) Write reg 13 // DEVAD
+ * 2) Write reg 14 // MMD Address
+ * 3) Write reg 13 // MMD Data Command for MMD DEVAD
+ * 3) Write reg 14 // Write MMD data
+ */
+static void phy_write_mmd_indirect(struct mii_bus *bus, int prtad, int devad,
+ int addr, u32 data)
+{
+ mmd_phy_indirect(bus, prtad, devad, addr);
+
+ /* Write the data into MMD's selected register */
+ bus->write(bus, addr, MII_MMD_DATA, data);
+}
+
+/* phy_init_eee
+ * @phydev: target phy_device struct
+ * @clk_stop_enable: PHY may stop the clock during LPI
+ *
+ * Description: it checks if the Energy-Efficient Ethernet (EEE)
+ * is supported by looking at the MMD registers 3.20 and 7.60/61
+ * and it programs the MMD register 3.0 setting the "Clock stop enable"
+ * bit if required.
+ * In fact, the clk_stop_enable can be passed to:
+ * 1 = The PHY may stop the clock during LPI
+ * 0 = Clock not stoppable
+ */
+int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
+{
+ int ret = -EPROTONOSUPPORT;
+
+ /* According to 802.3az,the EEE is supported only in full duplex-mode.
+ * Also EEE feature is active when core is operating with MII, GMII
+ * or RGMII.
+ */
+ if ((phydev->duplex == DUPLEX_FULL) &&
+ ((phydev->interface == PHY_INTERFACE_MODE_MII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_GMII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII))) {
+ int eee_cap, eee_link;
+
+ /* EEE ability must be supported in both local and remote
+ * PHY devices.
+ */
+ eee_cap = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_LPABLE,
+ MDIO_MMD_AN, phydev->addr);
+ if (eee_cap < 0)
+ return eee_cap;
+
+ eee_link = phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_ABLE,
+ MDIO_MMD_PCS, phydev->addr);
+ if (eee_link < 0)
+ return eee_link;
+
+ if (eee_cap && eee_link) {
+ if (clk_stop_enable) {
+ /* Configure the PHY to stop receiving xMII
+ * clock while it is signaling LPI
+ */
+ int ctrl;
+ ctrl = phy_read_mmd_indirect(phydev->bus,
+ MDIO_CTRL1,
+ MDIO_MMD_PCS,
+ phydev->addr);
+ if (ctrl < 0)
+ return ctrl;
+
+ ctrl |= MDIO_PCS_CTRL1_CLKSTOP_EN;
+ phy_write_mmd_indirect(phydev->bus, MDIO_CTRL1,
+ MDIO_MMD_PCS,
+ phydev->addr, ctrl);
+ }
+
+ ret = 0; /* EEE supported */
+ }
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(phy_init_eee);
+
+/* phy_get_eee_err
+ * @phydev: target phy_device struct
+ *
+ * Description: it is to report the number of time where the PHY
+ * failed to complete its normal wake sequence.
+ */
+int phy_get_eee_err(struct phy_device *phydev)
+{
+ return phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_WK_ERR,
+ MDIO_MMD_PCS, phydev->addr);
+
+}
+EXPORT_SYMBOL(phy_get_eee_err);
+
+static u32 phy_eee_to_adv(u16 eee_adv)
+{
+ u32 adv = 0;
+
+ if (eee_adv & MDIO_EEE_100TX)
+ adv |= ADVERTISED_100baseT_Full;
+ if (eee_adv & MDIO_EEE_1000T)
+ adv |= ADVERTISED_1000baseT_Full;
+ if (eee_adv & MDIO_EEE_10GT)
+ adv |= ADVERTISED_10000baseT_Full;
+ if (eee_adv & MDIO_EEE_1000KX)
+ adv |= ADVERTISED_1000baseKX_Full;
+ if (eee_adv & MDIO_EEE_10GKX4)
+ adv |= ADVERTISED_10000baseKX4_Full;
+ if (eee_adv & MDIO_EEE_10GKR)
+ adv |= ADVERTISED_10000baseKR_Full;
+
+ return adv;
+}
+
+static u32 phy_eee_to_supported(u16 eee_supported)
+{
+ u32 supported = 0;
+
+ if (eee_supported & MDIO_EEE_100TX)
+ supported |= SUPPORTED_100baseT_Full;
+ if (eee_supported & MDIO_EEE_1000T)
+ supported |= SUPPORTED_1000baseT_Full;
+ if (eee_supported & MDIO_EEE_10GT)
+ supported |= SUPPORTED_10000baseT_Full;
+ if (eee_supported & MDIO_EEE_1000KX)
+ supported |= SUPPORTED_1000baseKX_Full;
+ if (eee_supported & MDIO_EEE_10GKX4)
+ supported |= SUPPORTED_10000baseKX4_Full;
+ if (eee_supported & MDIO_EEE_10GKR)
+ supported |= SUPPORTED_10000baseKR_Full;
+
+ return supported;
+}
+
+/* phy_ethtool_get_eee
+ * @phydev: target phy_device struct
+ * @data: ethtool_eee data
+ *
+ * Description: it reportes the Supported/Advertisement/LP Advertisement
+ * capabilities.
+ */
+int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
+{
+ int val;
+
+ /* Get Supported EEE */
+ val = phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_ABLE,
+ MDIO_MMD_PCS, phydev->addr);
+ if (val < 0)
+ return val;
+ data->supported = phy_eee_to_supported(val);
+
+ /* Get advertisement EEE */
+ val = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV,
+ MDIO_MMD_AN, phydev->addr);
+ if (val < 0)
+ return val;
+ data->advertised = phy_eee_to_adv(val);
+
+ /* Get LP advertisement EEE */
+ val = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_LPABLE,
+ MDIO_MMD_AN, phydev->addr);
+ if (val < 0)
+ return val;
+ data->lp_advertised = phy_eee_to_adv(val);
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_get_eee);
+
+static u16 phy_adv_to_eee(u32 adv)
+{
+ u16 reg = 0;
+
+ if (adv & ADVERTISED_100baseT_Full)
+ reg |= MDIO_EEE_100TX;
+ if (adv & ADVERTISED_1000baseT_Full)
+ reg |= MDIO_EEE_1000T;
+ if (adv & ADVERTISED_10000baseT_Full)
+ reg |= MDIO_EEE_10GT;
+ if (adv & ADVERTISED_1000baseKX_Full)
+ reg |= MDIO_EEE_1000KX;
+ if (adv & ADVERTISED_10000baseKX4_Full)
+ reg |= MDIO_EEE_10GKX4;
+ if (adv & ADVERTISED_10000baseKR_Full)
+ reg |= MDIO_EEE_10GKR;
+
+ return reg;
+}
+
+/* phy_ethtool_set_eee
+ * @phydev: target phy_device struct
+ * @data: ethtool_eee data
+ *
+ * Description: it is to program the Advertisement EEE register.
+ */
+int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
+{
+ int val;
+
+ val = phy_adv_to_eee(data->advertised);
+ phy_write_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV, MDIO_MMD_AN,
+ phydev->addr, val);
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_set_eee);
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index dfb9479..4ad8f0e 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -43,7 +43,11 @@
#define MDIO_PKGID2 15
#define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */
#define MDIO_AN_LPA 19 /* AN LP abilities (base page) */
+#define MDIO_PCS_EEE_ABLE 20 /* EEE Capability register */
+#define MDIO_PCS_EEE_WK_ERR 22 /* EEE wake error counter */
#define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */
+#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */
+#define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */
/* Media-dependent registers. */
#define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */
@@ -56,7 +60,6 @@
#define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */
#define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */
#define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */
-#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */
/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */
@@ -82,6 +85,7 @@
#define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART
#define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE
#define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */
+#define MDIO_PCS_CTRL1_CLKSTOP_EN 0x400 /* Stop the clock during LPI */
/* 10 Gb/s */
#define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00)
@@ -237,9 +241,18 @@
#define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */
#define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */
-/* AN EEE Advertisement register. */
-#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */
-#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */
+/* EEE Supported/Advertisement/LP Advertisement registers.
+ *
+ * EEE capability Register (3.20), Advertisement (7.60) and
+ * Link partner ability (7.61) registers have and can use the same identical
+ * bit masks.
+ */
+#define MDIO_EEE_100TX 0x0002 /* 100TX EEE cap */
+#define MDIO_EEE_1000T 0x0004 /* 1000T EEE cap */
+#define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */
+#define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */
+#define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */
+#define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */
/* LASI RX_ALARM control/status registers. */
#define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 2783eca..8ef3a7a 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -21,6 +21,8 @@
#define MII_EXPANSION 0x06 /* Expansion register */
#define MII_CTRL1000 0x09 /* 1000BASE-T control */
#define MII_STAT1000 0x0a /* 1000BASE-T status */
+#define MII_MMD_CTRL 0x0d /* MMD Access Control Register */
+#define MII_MMD_DATA 0x0e /* MMD Access Data Register */
#define MII_ESTATUS 0x0f /* Extended Status */
#define MII_DCOUNTER 0x12 /* Disconnect counter */
#define MII_FCSCOUNTER 0x13 /* False carrier counter */
@@ -141,6 +143,13 @@
#define FLOW_CTRL_TX 0x01
#define FLOW_CTRL_RX 0x02
+/* MMD Access Control register fields */
+#define MII_MMD_CTRL_DEVAD_MASK 0x1f /* Mask MMD DEVAD*/
+#define MII_MMD_CTRL_ADDR 0x0000 /* Address */
+#define MII_MMD_CTRL_NOINCR 0x4000 /* no post increment */
+#define MII_MMD_CTRL_INCR_RDWT 0x8000 /* post increment on reads & writes */
+#define MII_MMD_CTRL_INCR_ON_WT 0xC000 /* post increment on writes only */
+
/* This structure is used in all SIOCxMIIxxx ioctl calls */
struct mii_ioctl_data {
__u16 phy_id;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index c291cae..97fc4cf 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -532,6 +532,11 @@ int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
int (*run)(struct phy_device *));
int phy_scan_fixups(struct phy_device *phydev);
+int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable);
+int phy_get_eee_err(struct phy_device *phydev);
+int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data);
+int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data);
+
int __init mdio_bus_init(void);
void mdio_bus_exit(void);
--
1.7.4.4
^ permalink raw reply related
* [net-next.git 3/4] stmmac: update the driver Documentation and add EEE
From: Giuseppe CAVALLARO @ 2012-06-13 7:17 UTC (permalink / raw)
To: netdev; +Cc: bhutchings, rayagond, davem, yuvalmin, Giuseppe Cavallaro
In-Reply-To: <1339571827-7162-1-git-send-email-peppe.cavallaro@st.com>
This patch updates the stmmac's documentation adding
some missing files in the section used to describe the
internal driver's structure.
Also the patch adds a new section to describe the EEE support.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
---
Documentation/networking/stmmac.txt | 36 +++++++++++++++++++++++++++++-----
1 files changed, 30 insertions(+), 6 deletions(-)
diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
index 5cb9a19..c676b9c 100644
--- a/Documentation/networking/stmmac.txt
+++ b/Documentation/networking/stmmac.txt
@@ -257,9 +257,11 @@ reset procedure etc).
o Makefile
o stmmac_main.c: main network device driver;
o stmmac_mdio.c: mdio functions;
+ o stmmac_pci: PCI driver;
+ o stmmac_platform.c: platform driver
o stmmac_ethtool.c: ethtool support;
o stmmac_timer.[ch]: timer code used for mitigating the driver dma interrupts
- Only tested on ST40 platforms based.
+ (only tested on ST40 platforms based);
o stmmac.h: private driver structure;
o common.h: common definitions and VFTs;
o descs.h: descriptor structure definitions;
@@ -269,9 +271,11 @@ reset procedure etc).
o dwmac100_core: MAC 100 core and dma code;
o dwmac100_dma.c: dma funtions for the MAC chip;
o dwmac1000.h: specific header file for the MAC;
- o dwmac_lib.c: generic DMA functions shared among chips
- o enh_desc.c: functions for handling enhanced descriptors
- o norm_desc.c: functions for handling normal descriptors
+ o dwmac_lib.c: generic DMA functions shared among chips;
+ o enh_desc.c: functions for handling enhanced descriptors;
+ o norm_desc.c: functions for handling normal descriptors;
+ o chain_mode.c/ring_mode.c:: functions to manage RING/CHAINED modes;
+ o mmc_core.c/mmc.h: Management MAC Counters;
5) Debug Information
@@ -304,7 +308,27 @@ All these are only useful during the developing stage
and should never enabled inside the code for general usage.
In fact, these can generate an huge amount of debug messages.
-6) TODO:
+6) Energy Efficient Ethernet
+
+Energy Efficient Ethernet(EEE) enables IEEE 802.3 MAC sublayer along
+with a family of Physical layer to operate in the Low power Idle(LPI)
+mode. The EEE mode supports the IEEE 802.3 MAC operation at 100Mbps,
+1000Mbps & 10Gbps.
+
+The LPI mode allows power saving by switching off parts of the
+communication device functionality when there is no data to be
+transmitted & received. The system on both the side of the link can
+disable some functionalities & save power during the period of low-link
+utilization. The MAC controls whether the system should enter or exit
+the LPI mode & communicate this to PHY.
+
+As soon as the interface is opened, the driver verifies if the EEE can
+be supported. This is done by looking at both the DMA HW capability
+register and the PHY devices MCD registers.
+To enter in Tx LPI mode the driver needs to have a software timer
+that enable and disable the LPI mode when there is nothing to be
+transmitted.
+
+7) TODO:
o XGMAC is not supported.
- o Add the EEE - Energy Efficient Ethernet
o Add the PTP - precision time protocol
--
1.7.4.4
^ permalink raw reply related
* [net-next.git 2/4 (v2)] stmmac: do not use strict_strtoul but kstrtoul
From: Giuseppe CAVALLARO @ 2012-06-13 7:17 UTC (permalink / raw)
To: netdev; +Cc: bhutchings, rayagond, davem, yuvalmin, Giuseppe Cavallaro
In-Reply-To: <1339571827-7162-1-git-send-email-peppe.cavallaro@st.com>
This patch replaces the obsolete strict_strtoul with kstrtoul.
v2: also removed casting on kstrtoul.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 +-
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 67 +++++++++-----------
2 files changed, 31 insertions(+), 38 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 6d07ba2..1d70f64 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -88,7 +88,7 @@ struct stmmac_priv {
int synopsys_id;
};
-extern int phyaddr;
+extern unsigned long int phyaddr;
extern int stmmac_mdio_unregister(struct net_device *ndev);
extern int stmmac_mdio_register(struct net_device *ndev);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 8899e10..bd53003 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -80,39 +80,39 @@
/* Module parameters */
#define TX_TIMEO 5000 /* default 5 seconds */
-static int watchdog = TX_TIMEO;
-module_param(watchdog, int, S_IRUGO | S_IWUSR);
+static unsigned long int watchdog = TX_TIMEO;
+module_param(watchdog, ulong, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds");
-static int debug = -1; /* -1: default, 0: no output, 16: all */
-module_param(debug, int, S_IRUGO | S_IWUSR);
+static unsigned long int debug = -1; /* -1: default, 0: no output, 16: all */
+module_param(debug, ulong, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Message Level (0: no output, 16: all)");
-int phyaddr = -1;
-module_param(phyaddr, int, S_IRUGO);
+unsigned long int phyaddr = -1;
+module_param(phyaddr, ulong, S_IRUGO);
MODULE_PARM_DESC(phyaddr, "Physical device address");
#define DMA_TX_SIZE 256
-static int dma_txsize = DMA_TX_SIZE;
-module_param(dma_txsize, int, S_IRUGO | S_IWUSR);
+static unsigned long int dma_txsize = DMA_TX_SIZE;
+module_param(dma_txsize, ulong, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(dma_txsize, "Number of descriptors in the TX list");
#define DMA_RX_SIZE 256
-static int dma_rxsize = DMA_RX_SIZE;
-module_param(dma_rxsize, int, S_IRUGO | S_IWUSR);
+static unsigned long int dma_rxsize = DMA_RX_SIZE;
+module_param(dma_rxsize, ulong, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(dma_rxsize, "Number of descriptors in the RX list");
-static int flow_ctrl = FLOW_OFF;
-module_param(flow_ctrl, int, S_IRUGO | S_IWUSR);
+static unsigned long int flow_ctrl = FLOW_OFF;
+module_param(flow_ctrl, ulong, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(flow_ctrl, "Flow control ability [on/off]");
-static int pause = PAUSE_TIME;
-module_param(pause, int, S_IRUGO | S_IWUSR);
+static unsigned long int pause = PAUSE_TIME;
+module_param(pause, ulong, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(pause, "Flow Control Pause Time");
#define TC_DEFAULT 64
-static int tc = TC_DEFAULT;
-module_param(tc, int, S_IRUGO | S_IWUSR);
+static unsigned long int tc = TC_DEFAULT;
+module_param(tc, ulong, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(tc, "DMA threshold control value");
/* Pay attention to tune this parameter; take care of both
@@ -120,14 +120,14 @@ MODULE_PARM_DESC(tc, "DMA threshold control value");
* Many tests showed that ~4ms latency seems to be good enough. */
#ifdef CONFIG_STMMAC_TIMER
#define DEFAULT_PERIODIC_RATE 256
-static int tmrate = DEFAULT_PERIODIC_RATE;
-module_param(tmrate, int, S_IRUGO | S_IWUSR);
+static unsigned long int tmrate = DEFAULT_PERIODIC_RATE;
+module_param(tmrate, ulong, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(tmrate, "External timer freq. (default: 256Hz)");
#endif
#define DMA_BUFFER_SIZE BUF_SIZE_2KiB
-static int buf_sz = DMA_BUFFER_SIZE;
-module_param(buf_sz, int, S_IRUGO | S_IWUSR);
+static unsigned long int buf_sz = DMA_BUFFER_SIZE;
+module_param(buf_sz, ulong, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(buf_sz, "DMA buffer size");
static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
@@ -2126,42 +2126,35 @@ static int __init stmmac_cmdline_opt(char *str)
return -EINVAL;
while ((opt = strsep(&str, ",")) != NULL) {
if (!strncmp(opt, "debug:", 6)) {
- if (strict_strtoul(opt + 6, 0, (unsigned long *)&debug))
+ if (kstrtoul(opt + 6, 0, &debug))
goto err;
} else if (!strncmp(opt, "phyaddr:", 8)) {
- if (strict_strtoul(opt + 8, 0,
- (unsigned long *)&phyaddr))
+ if (kstrtoul(opt + 8, 0, &phyaddr))
goto err;
} else if (!strncmp(opt, "dma_txsize:", 11)) {
- if (strict_strtoul(opt + 11, 0,
- (unsigned long *)&dma_txsize))
+ if (kstrtoul(opt + 11, 0, &dma_txsize))
goto err;
} else if (!strncmp(opt, "dma_rxsize:", 11)) {
- if (strict_strtoul(opt + 11, 0,
- (unsigned long *)&dma_rxsize))
+ if (kstrtoul(opt + 11, 0, &dma_rxsize))
goto err;
} else if (!strncmp(opt, "buf_sz:", 7)) {
- if (strict_strtoul(opt + 7, 0,
- (unsigned long *)&buf_sz))
+ if (kstrtoul(opt + 7, 0, &buf_sz))
goto err;
} else if (!strncmp(opt, "tc:", 3)) {
- if (strict_strtoul(opt + 3, 0, (unsigned long *)&tc))
+ if (kstrtoul(opt + 3, 0, &tc))
goto err;
} else if (!strncmp(opt, "watchdog:", 9)) {
- if (strict_strtoul(opt + 9, 0,
- (unsigned long *)&watchdog))
+ if (kstrtoul(opt + 9, 0, &watchdog))
goto err;
} else if (!strncmp(opt, "flow_ctrl:", 10)) {
- if (strict_strtoul(opt + 10, 0,
- (unsigned long *)&flow_ctrl))
+ if (kstrtoul(opt + 10, 0, &flow_ctrl))
goto err;
} else if (!strncmp(opt, "pause:", 6)) {
- if (strict_strtoul(opt + 6, 0, (unsigned long *)&pause))
+ if (kstrtoul(opt + 6, 0, &pause))
goto err;
#ifdef CONFIG_STMMAC_TIMER
} else if (!strncmp(opt, "tmrate:", 7)) {
- if (strict_strtoul(opt + 7, 0,
- (unsigned long *)&tmrate))
+ if (kstrtoul(opt + 7, 0, &tmrate))
goto err;
#endif
}
--
1.7.4.4
^ permalink raw reply related
* [net-next.git 4/4 (v5)] stmmac: add the Energy Efficient Ethernet support
From: Giuseppe CAVALLARO @ 2012-06-13 7:17 UTC (permalink / raw)
To: netdev; +Cc: bhutchings, rayagond, davem, yuvalmin, Giuseppe Cavallaro
In-Reply-To: <1339571827-7162-1-git-send-email-peppe.cavallaro@st.com>
This patch adds the Energy Efficient Ethernet support to the stmmac.
Please see the driver's documentation for further details about this support
in the driver.
Thanks also goes to Rayagond Kokatanur for his first implementation.
Note:
to clearly manage and expose the lpi interrupt status and eee ethtool
stats I've had to do some modifications to the driver's design and I
found really useful to move other parts of the code (e.g. mmc irq stat)
in the main directly. So this means that some core has been reworked
to introduce the EEE.
v1: initial patch
v2: fixed some sparse issues (typos)
v3: erroneously sent the v2 renamed as v3
v4:
o Fixed the return value of the stmmac_eee_init as suggested by D.Miller
o Totally reviewed the ethtool support for EEE
o Added a new internal parameter to tune the SW timer for TX LPI.
v5: do not change any eee setting in case of the stmmac_ethtool_op_set_eee fails
(it has to return -EOPNOTSUPP in that case).
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 31 ++++-
drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 20 +++
.../net/ethernet/stmicro/stmmac/dwmac1000_core.c | 101 +++++++++++-
.../net/ethernet/stmicro/stmmac/dwmac100_core.c | 4 +-
drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 8 +
.../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 57 +++++++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 166 +++++++++++++++++++-
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 2 +
9 files changed, 372 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index bcd54d6..e2d0832 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -95,6 +95,16 @@ struct stmmac_extra_stats {
unsigned long poll_n;
unsigned long sched_timer_n;
unsigned long normal_irq_n;
+ unsigned long mmc_tx_irq_n;
+ unsigned long mmc_rx_irq_n;
+ unsigned long mmc_rx_csum_offload_irq_n;
+ /* EEE */
+ unsigned long irq_receive_pmt_irq_n;
+ unsigned long irq_tx_path_in_lpi_mode_n;
+ unsigned long irq_tx_path_exit_lpi_mode_n;
+ unsigned long irq_rx_path_in_lpi_mode_n;
+ unsigned long irq_rx_path_exit_lpi_mode_n;
+ unsigned long phy_eee_wakeup_error_n;
};
/* CSR Frequency Access Defines*/
@@ -162,6 +172,17 @@ enum tx_dma_irq_status {
handle_tx_rx = 3,
};
+enum core_specific_irq_mask {
+ core_mmc_tx_irq = 1,
+ core_mmc_rx_irq = 2,
+ core_mmc_rx_csum_offload_irq = 4,
+ core_irq_receive_pmt_irq = 8,
+ core_irq_tx_path_in_lpi_mode = 16,
+ core_irq_tx_path_exit_lpi_mode = 32,
+ core_irq_rx_path_in_lpi_mode = 64,
+ core_irq_rx_path_exit_lpi_mode = 128,
+};
+
/* DMA HW capabilities */
struct dma_features {
unsigned int mbps_10_100;
@@ -208,6 +229,10 @@ struct dma_features {
#define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */
#define MAC_RNABLE_RX 0x00000004 /* Receiver Enable */
+/* Default LPI timers */
+#define STMMAC_DEFAULT_LIT_LS_TIMER 0x3E8
+#define STMMAC_DEFAULT_TWT_LS_TIMER 0x0
+
struct stmmac_desc_ops {
/* DMA RX descriptor ring initialization */
void (*init_rx_desc) (struct dma_desc *p, unsigned int ring_size,
@@ -278,7 +303,7 @@ struct stmmac_ops {
/* Dump MAC registers */
void (*dump_regs) (void __iomem *ioaddr);
/* Handle extra events on specific interrupts hw dependent */
- void (*host_irq_status) (void __iomem *ioaddr);
+ int (*host_irq_status) (void __iomem *ioaddr);
/* Multicast filter setting */
void (*set_filter) (struct net_device *dev, int id);
/* Flow control setting */
@@ -291,6 +316,10 @@ struct stmmac_ops {
unsigned int reg_n);
void (*get_umac_addr) (void __iomem *ioaddr, unsigned char *addr,
unsigned int reg_n);
+ void (*set_eee_mode) (void __iomem *ioaddr);
+ void (*reset_eee_mode) (void __iomem *ioaddr);
+ void (*set_eee_timer) (void __iomem *ioaddr, int ls, int tw);
+ void (*set_eee_pls) (void __iomem *ioaddr, int link);
};
struct mac_link {
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
index 23478bf..f90fcb5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
@@ -36,6 +36,7 @@
#define GMAC_INT_STATUS 0x00000038 /* interrupt status register */
enum dwmac1000_irq_status {
+ lpiis_irq = 0x400,
time_stamp_irq = 0x0200,
mmc_rx_csum_offload_irq = 0x0080,
mmc_tx_irq = 0x0040,
@@ -60,6 +61,25 @@ enum power_event {
power_down = 0x00000001,
};
+/* Energy Efficient Ethernet (EEE)
+ *
+ * LPI status, timer and control register offset
+ */
+#define LPI_CTRL_STATUS 0x0030
+#define LPI_TIMER_CTRL 0x0034
+
+/* LPI control and status defines */
+#define LPI_CTRL_STATUS_LPITXA 0x00080000 /* Enable LPI TX Automate */
+#define LPI_CTRL_STATUS_PLSEN 0x00040000 /* Enable PHY Link Status */
+#define LPI_CTRL_STATUS_PLS 0x00020000 /* PHY Link Status */
+#define LPI_CTRL_STATUS_LPIEN 0x00010000 /* LPI Enable */
+#define LPI_CTRL_STATUS_RLPIST 0x00000200 /* Receive LPI state */
+#define LPI_CTRL_STATUS_TLPIST 0x00000100 /* Transmit LPI state */
+#define LPI_CTRL_STATUS_RLPIEX 0x00000008 /* Receive LPI Exit */
+#define LPI_CTRL_STATUS_RLPIEN 0x00000004 /* Receive LPI Entry */
+#define LPI_CTRL_STATUS_TLPIEX 0x00000002 /* Transmit LPI Exit */
+#define LPI_CTRL_STATUS_TLPIEN 0x00000001 /* Transmit LPI Entry */
+
/* GMAC HW ADDR regs */
#define GMAC_ADDR_HIGH(reg) (((reg > 15) ? 0x00000800 : 0x00000040) + \
(reg * 8))
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index b5e4d02..bfe0226 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -194,26 +194,107 @@ static void dwmac1000_pmt(void __iomem *ioaddr, unsigned long mode)
}
-static void dwmac1000_irq_status(void __iomem *ioaddr)
+static int dwmac1000_irq_status(void __iomem *ioaddr)
{
u32 intr_status = readl(ioaddr + GMAC_INT_STATUS);
+ int status = 0;
/* Not used events (e.g. MMC interrupts) are not handled. */
- if ((intr_status & mmc_tx_irq))
- CHIP_DBG(KERN_DEBUG "GMAC: MMC tx interrupt: 0x%08x\n",
+ if ((intr_status & mmc_tx_irq)) {
+ CHIP_DBG(KERN_INFO "GMAC: MMC tx interrupt: 0x%08x\n",
readl(ioaddr + GMAC_MMC_TX_INTR));
- if (unlikely(intr_status & mmc_rx_irq))
- CHIP_DBG(KERN_DEBUG "GMAC: MMC rx interrupt: 0x%08x\n",
+ status |= core_mmc_tx_irq;
+ }
+ if (unlikely(intr_status & mmc_rx_irq)) {
+ CHIP_DBG(KERN_INFO "GMAC: MMC rx interrupt: 0x%08x\n",
readl(ioaddr + GMAC_MMC_RX_INTR));
- if (unlikely(intr_status & mmc_rx_csum_offload_irq))
- CHIP_DBG(KERN_DEBUG "GMAC: MMC rx csum offload: 0x%08x\n",
+ status |= core_mmc_rx_irq;
+ }
+ if (unlikely(intr_status & mmc_rx_csum_offload_irq)) {
+ CHIP_DBG(KERN_INFO "GMAC: MMC rx csum offload: 0x%08x\n",
readl(ioaddr + GMAC_MMC_RX_CSUM_OFFLOAD));
+ status |= core_mmc_rx_csum_offload_irq;
+ }
if (unlikely(intr_status & pmt_irq)) {
- CHIP_DBG(KERN_DEBUG "GMAC: received Magic frame\n");
+ CHIP_DBG(KERN_INFO "GMAC: received Magic frame\n");
/* clear the PMT bits 5 and 6 by reading the PMT
* status register. */
readl(ioaddr + GMAC_PMT);
+ status |= core_irq_receive_pmt_irq;
}
+ /* MAC trx/rx EEE LPI entry/exit interrupts */
+ if (intr_status & lpiis_irq) {
+ /* Clean LPI interrupt by reading the Reg 12 */
+ u32 lpi_status = readl(ioaddr + LPI_CTRL_STATUS);
+
+ if (lpi_status & LPI_CTRL_STATUS_TLPIEN) {
+ CHIP_DBG(KERN_INFO "GMAC TX entered in LPI\n");
+ status |= core_irq_tx_path_in_lpi_mode;
+ }
+ if (lpi_status & LPI_CTRL_STATUS_TLPIEX) {
+ CHIP_DBG(KERN_INFO "GMAC TX exit from LPI\n");
+ status |= core_irq_tx_path_exit_lpi_mode;
+ }
+ if (lpi_status & LPI_CTRL_STATUS_RLPIEN) {
+ CHIP_DBG(KERN_INFO "GMAC RX entered in LPI\n");
+ status |= core_irq_rx_path_in_lpi_mode;
+ }
+ if (lpi_status & LPI_CTRL_STATUS_RLPIEX) {
+ CHIP_DBG(KERN_INFO "GMAC RX exit from LPI\n");
+ status |= core_irq_rx_path_exit_lpi_mode;
+ }
+ }
+
+ return status;
+}
+
+static void dwmac1000_set_eee_mode(void __iomem *ioaddr)
+{
+ u32 value;
+
+ /* Enable the link status receive on RGMII, SGMII ore SMII
+ * receive path and instruct the transmit to enter in LPI
+ * state. */
+ value = readl(ioaddr + LPI_CTRL_STATUS);
+ value |= LPI_CTRL_STATUS_LPIEN | LPI_CTRL_STATUS_LPITXA;
+ writel(value, ioaddr + LPI_CTRL_STATUS);
+}
+
+static void dwmac1000_reset_eee_mode(void __iomem *ioaddr)
+{
+ u32 value;
+
+ value = readl(ioaddr + LPI_CTRL_STATUS);
+ value &= ~(LPI_CTRL_STATUS_LPIEN | LPI_CTRL_STATUS_LPITXA);
+ writel(value, ioaddr + LPI_CTRL_STATUS);
+}
+
+static void dwmac1000_set_eee_pls(void __iomem *ioaddr, int link)
+{
+ u32 value;
+
+ value = readl(ioaddr + LPI_CTRL_STATUS);
+
+ if (link)
+ value |= LPI_CTRL_STATUS_PLS;
+ else
+ value &= ~LPI_CTRL_STATUS_PLS;
+
+ writel(value, ioaddr + LPI_CTRL_STATUS);
+}
+
+static void dwmac1000_set_eee_timer(void __iomem *ioaddr, int ls, int tw)
+{
+ int value = ((tw & 0xffff)) | ((ls & 0x7ff) << 16);
+
+ /* Program the timers in the LPI timer control register:
+ * LS: minimum time (ms) for which the link
+ * status from PHY should be ok before transmitting
+ * the LPI pattern.
+ * TW: minimum time (us) for which the core waits
+ * after it has stopped transmitting the LPI pattern.
+ */
+ writel(value, ioaddr + LPI_TIMER_CTRL);
}
static const struct stmmac_ops dwmac1000_ops = {
@@ -226,6 +307,10 @@ static const struct stmmac_ops dwmac1000_ops = {
.pmt = dwmac1000_pmt,
.set_umac_addr = dwmac1000_set_umac_addr,
.get_umac_addr = dwmac1000_get_umac_addr,
+ .set_eee_mode = dwmac1000_set_eee_mode,
+ .reset_eee_mode = dwmac1000_reset_eee_mode,
+ .set_eee_timer = dwmac1000_set_eee_timer,
+ .set_eee_pls = dwmac1000_set_eee_pls,
};
struct mac_device_info *dwmac1000_setup(void __iomem *ioaddr)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
index 19e0f4e..f83210e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
@@ -72,9 +72,9 @@ static int dwmac100_rx_ipc_enable(void __iomem *ioaddr)
return 0;
}
-static void dwmac100_irq_status(void __iomem *ioaddr)
+static int dwmac100_irq_status(void __iomem *ioaddr)
{
- return;
+ return 0;
}
static void dwmac100_set_umac_addr(void __iomem *ioaddr, unsigned char *addr,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
index 6e0360f..e678ce3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
@@ -70,6 +70,7 @@
#define DMA_INTR_DEFAULT_MASK (DMA_INTR_NORMAL | DMA_INTR_ABNORMAL)
/* DMA Status register defines */
+#define DMA_STATUS_GLPII 0x40000000 /* GMAC LPI interrupt */
#define DMA_STATUS_GPI 0x10000000 /* PMT interrupt */
#define DMA_STATUS_GMI 0x08000000 /* MMC interrupt */
#define DMA_STATUS_GLI 0x04000000 /* GMAC Line interface int */
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 1d70f64..df662eb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -86,6 +86,12 @@ struct stmmac_priv {
#endif
int clk_csr;
int synopsys_id;
+ struct timer_list eee_ctrl_timer;
+ bool tx_path_in_lpi_mode;
+ int lpi_irq;
+ int eee_enabled;
+ int eee_active;
+ int tx_lpi_timer;
};
extern unsigned long int phyaddr;
@@ -105,6 +111,8 @@ int stmmac_dvr_remove(struct net_device *ndev);
struct stmmac_priv *stmmac_dvr_probe(struct device *device,
struct plat_stmmacenet_data *plat_dat,
void __iomem *addr);
+void stmmac_disable_eee_mode(struct stmmac_priv *priv);
+bool stmmac_eee_init(struct stmmac_priv *priv);
#ifdef CONFIG_HAVE_CLK
static inline int stmmac_clk_enable(struct stmmac_priv *priv)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index ce43184..76fd61a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -93,6 +93,16 @@ static const struct stmmac_stats stmmac_gstrings_stats[] = {
STMMAC_STAT(poll_n),
STMMAC_STAT(sched_timer_n),
STMMAC_STAT(normal_irq_n),
+ STMMAC_STAT(normal_irq_n),
+ STMMAC_STAT(mmc_tx_irq_n),
+ STMMAC_STAT(mmc_rx_irq_n),
+ STMMAC_STAT(mmc_rx_csum_offload_irq_n),
+ STMMAC_STAT(irq_receive_pmt_irq_n),
+ STMMAC_STAT(irq_tx_path_in_lpi_mode_n),
+ STMMAC_STAT(irq_tx_path_exit_lpi_mode_n),
+ STMMAC_STAT(irq_rx_path_in_lpi_mode_n),
+ STMMAC_STAT(irq_rx_path_exit_lpi_mode_n),
+ STMMAC_STAT(phy_eee_wakeup_error_n),
};
#define STMMAC_STATS_LEN ARRAY_SIZE(stmmac_gstrings_stats)
@@ -366,6 +376,11 @@ static void stmmac_get_ethtool_stats(struct net_device *dev,
(*(u32 *)p);
}
}
+ if (priv->eee_enabled) {
+ int val = phy_get_eee_err(priv->phydev);
+ if (val)
+ priv->xstats.phy_eee_wakeup_error_n = val;
+ }
}
for (i = 0; i < STMMAC_STATS_LEN; i++) {
char *p = (char *)priv + stmmac_gstrings_stats[i].stat_offset;
@@ -464,6 +479,46 @@ static int stmmac_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
return 0;
}
+static int stmmac_ethtool_op_get_eee(struct net_device *dev,
+ struct ethtool_eee *edata)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ if (!priv->dma_cap.eee)
+ return -EOPNOTSUPP;
+
+ edata->eee_enabled = priv->eee_enabled;
+ edata->eee_active = priv->eee_active;
+ edata->tx_lpi_timer = priv->tx_lpi_timer;
+
+ return phy_ethtool_get_eee(priv->phydev, edata);
+}
+
+static int stmmac_ethtool_op_set_eee(struct net_device *dev,
+ struct ethtool_eee *edata)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ priv->eee_enabled = edata->eee_enabled;
+
+ if (!priv->eee_enabled)
+ stmmac_disable_eee_mode(priv);
+ else {
+ /* We are asking for enabling the EEE but it is safe
+ * to verify all by invoking the eee_init function.
+ * In case of failure it will return an error.
+ */
+ priv->eee_enabled = stmmac_eee_init(priv);
+ if (!priv->eee_enabled)
+ return -EOPNOTSUPP;
+
+ /* Do not change tx_lpi_timer in case of failure */
+ priv->tx_lpi_timer = edata->tx_lpi_timer;
+ }
+
+ return phy_ethtool_set_eee(priv->phydev, edata);
+}
+
static const struct ethtool_ops stmmac_ethtool_ops = {
.begin = stmmac_check_if_running,
.get_drvinfo = stmmac_ethtool_getdrvinfo,
@@ -480,6 +535,8 @@ static const struct ethtool_ops stmmac_ethtool_ops = {
.get_strings = stmmac_get_strings,
.get_wol = stmmac_get_wol,
.set_wol = stmmac_set_wol,
+ .get_eee = stmmac_ethtool_op_get_eee,
+ .set_eee = stmmac_ethtool_op_set_eee,
.get_sset_count = stmmac_get_sset_count,
.get_ts_info = ethtool_op_get_ts_info,
};
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index bd53003..54e2ed6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -134,6 +134,12 @@ static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
NETIF_MSG_LINK | NETIF_MSG_IFUP |
NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
+#define STMMAC_DEFAULT_LPI_TIMER 1000
+static unsigned long int eee_timer = STMMAC_DEFAULT_LPI_TIMER;
+module_param(eee_timer, ulong, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(eee_timer, "LPI tx expiration time in msec");
+#define STMMAC_LPI_TIMER(x) (jiffies + msecs_to_jiffies(x))
+
static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
#ifdef CONFIG_STMMAC_DEBUG_FS
@@ -162,6 +168,8 @@ static void stmmac_verify_args(void)
flow_ctrl = FLOW_OFF;
if (unlikely((pause < 0) || (pause > 0xffff)))
pause = PAUSE_TIME;
+ if (eee_timer < 0)
+ eee_timer = STMMAC_DEFAULT_LPI_TIMER;
}
static void stmmac_clk_csr_set(struct stmmac_priv *priv)
@@ -230,6 +238,85 @@ static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv)
phydev->speed);
}
+static void stmmac_enable_eee_mode(struct stmmac_priv *priv)
+{
+ /* Check and enter in LPI mode */
+ if ((priv->dirty_tx == priv->cur_tx) &&
+ (priv->tx_path_in_lpi_mode == false))
+ priv->hw->mac->set_eee_mode(priv->ioaddr);
+}
+
+void stmmac_disable_eee_mode(struct stmmac_priv *priv)
+{
+ /* Exit and disable EEE in case of we are are in LPI state. */
+ priv->hw->mac->reset_eee_mode(priv->ioaddr);
+ del_timer_sync(&priv->eee_ctrl_timer);
+ priv->tx_path_in_lpi_mode = false;
+}
+
+/**
+ * stmmac_eee_ctrl_timer
+ * @arg : data hook
+ * Description:
+ * If there is no data transfer and if we are not in LPI state,
+ * then MAC Transmitter can be moved to LPI state.
+ */
+static void stmmac_eee_ctrl_timer(unsigned long arg)
+{
+ struct stmmac_priv *priv = (struct stmmac_priv *)arg;
+
+ stmmac_enable_eee_mode(priv);
+ mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_TIMER(eee_timer));
+}
+
+/**
+ * stmmac_eee_init
+ * @priv: private device pointer
+ * Description:
+ * If the EEE support has been enabled while configuring the driver,
+ * if the GMAC actually supports the EEE (from the HW cap reg) and the
+ * phy can also manage EEE, so enable the LPI state and start the timer
+ * to verify if the tx path can enter in LPI state.
+ */
+bool stmmac_eee_init(struct stmmac_priv *priv)
+{
+ bool ret = false;
+
+ /* MAC core supports the EEE feature. */
+ if (priv->dma_cap.eee) {
+ /* Check if the PHY supports EEE */
+ if (phy_init_eee(priv->phydev, 1))
+ goto out;
+
+ priv->eee_active = 1;
+ init_timer(&priv->eee_ctrl_timer);
+ priv->eee_ctrl_timer.function = stmmac_eee_ctrl_timer;
+ priv->eee_ctrl_timer.data = (unsigned long)priv;
+ priv->eee_ctrl_timer.expires = STMMAC_LPI_TIMER(eee_timer);
+ add_timer(&priv->eee_ctrl_timer);
+
+ priv->hw->mac->set_eee_timer(priv->ioaddr,
+ STMMAC_DEFAULT_LIT_LS_TIMER,
+ priv->tx_lpi_timer);
+
+ pr_info("stmmac: Energy-Efficient Ethernet initialized\n");
+
+ ret = true;
+ }
+out:
+ return ret;
+}
+
+static void stmmac_eee_adjust(struct stmmac_priv *priv)
+{
+ /* When the EEE has been already initialised we have to
+ * modify the PLS bit in the LPI ctrl & status reg according
+ * to the PHY link status. For this reason.
+ */
+ if (priv->eee_enabled)
+ priv->hw->mac->set_eee_pls(priv->ioaddr, priv->phydev->link);
+}
+
/**
* stmmac_adjust_link
* @dev: net device structure
@@ -250,6 +337,7 @@ static void stmmac_adjust_link(struct net_device *dev)
phydev->addr, phydev->link);
spin_lock_irqsave(&priv->lock, flags);
+
if (phydev->link) {
u32 ctrl = readl(priv->ioaddr + MAC_CTRL_REG);
@@ -316,6 +404,8 @@ static void stmmac_adjust_link(struct net_device *dev)
if (new_state && netif_msg_link(priv))
phy_print_status(phydev);
+ stmmac_eee_adjust(priv);
+
spin_unlock_irqrestore(&priv->lock, flags);
DBG(probe, DEBUG, "stmmac_adjust_link: exiting\n");
@@ -333,7 +423,7 @@ static int stmmac_init_phy(struct net_device *dev)
{
struct stmmac_priv *priv = netdev_priv(dev);
struct phy_device *phydev;
- char phy_id[MII_BUS_ID_SIZE + 3];
+ char phy_id_fmt[MII_BUS_ID_SIZE + 3];
char bus_id[MII_BUS_ID_SIZE];
int interface = priv->plat->interface;
priv->oldlink = 0;
@@ -347,11 +437,12 @@ static int stmmac_init_phy(struct net_device *dev)
snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
priv->plat->bus_id);
- snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
+ snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
priv->plat->phy_addr);
- pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id);
+ pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id_fmt);
- phydev = phy_connect(dev, phy_id, &stmmac_adjust_link, 0, interface);
+ phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, 0,
+ interface);
if (IS_ERR(phydev)) {
pr_err("%s: Could not attach to PHY\n", dev->name);
@@ -690,6 +781,11 @@ static void stmmac_tx(struct stmmac_priv *priv)
}
netif_tx_unlock(priv->dev);
}
+
+ if ((priv->eee_enabled) && (!priv->tx_path_in_lpi_mode)) {
+ stmmac_enable_eee_mode(priv);
+ mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_TIMER(eee_timer));
+ }
spin_unlock(&priv->tx_lock);
}
@@ -1028,6 +1124,17 @@ static int stmmac_open(struct net_device *dev)
}
}
+ /* Request the IRQ lines */
+ if (priv->lpi_irq != -ENXIO) {
+ ret = request_irq(priv->lpi_irq, stmmac_interrupt, IRQF_SHARED,
+ dev->name, dev);
+ if (unlikely(ret < 0)) {
+ pr_err("%s: ERROR: allocating the LPI IRQ %d (%d)\n",
+ __func__, priv->lpi_irq, ret);
+ goto open_error_lpiirq;
+ }
+ }
+
/* Enable the MAC Rx/Tx */
stmmac_set_mac(priv->ioaddr, true);
@@ -1063,12 +1170,19 @@ static int stmmac_open(struct net_device *dev)
if (priv->phydev)
phy_start(priv->phydev);
+ priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS_TIMER;
+ priv->eee_enabled = stmmac_eee_init(priv);
+
napi_enable(&priv->napi);
skb_queue_head_init(&priv->rx_recycle);
netif_start_queue(dev);
return 0;
+open_error_lpiirq:
+ if (priv->wol_irq != dev->irq)
+ free_irq(priv->wol_irq, dev);
+
open_error_wolirq:
free_irq(dev->irq, dev);
@@ -1094,6 +1208,9 @@ static int stmmac_release(struct net_device *dev)
{
struct stmmac_priv *priv = netdev_priv(dev);
+ if (priv->eee_enabled)
+ del_timer_sync(&priv->eee_ctrl_timer);
+
/* Stop and disconnect the PHY */
if (priv->phydev) {
phy_stop(priv->phydev);
@@ -1116,6 +1233,8 @@ static int stmmac_release(struct net_device *dev)
free_irq(dev->irq, dev);
if (priv->wol_irq != dev->irq)
free_irq(priv->wol_irq, dev);
+ if (priv->lpi_irq != -ENXIO)
+ free_irq(priv->lpi_irq, dev);
/* Stop TX/RX DMA and clear the descriptors */
priv->hw->dma->stop_tx(priv->ioaddr);
@@ -1165,6 +1284,9 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
spin_lock(&priv->tx_lock);
+ if (priv->tx_path_in_lpi_mode)
+ stmmac_disable_eee_mode(priv);
+
entry = priv->cur_tx % txsize;
#ifdef STMMAC_XMIT_DEBUG
@@ -1541,10 +1663,37 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
return IRQ_NONE;
}
- if (priv->plat->has_gmac)
- /* To handle GMAC own interrupts */
- priv->hw->mac->host_irq_status((void __iomem *) dev->base_addr);
+ /* To handle GMAC own interrupts */
+ if (priv->plat->has_gmac) {
+ int status = priv->hw->mac->host_irq_status((void __iomem *)
+ dev->base_addr);
+ if (unlikely(status)) {
+ if (status & core_mmc_tx_irq)
+ priv->xstats.mmc_tx_irq_n++;
+ if (status & core_mmc_rx_irq)
+ priv->xstats.mmc_rx_irq_n++;
+ if (status & core_mmc_rx_csum_offload_irq)
+ priv->xstats.mmc_rx_csum_offload_irq_n++;
+ if (status & core_irq_receive_pmt_irq)
+ priv->xstats.irq_receive_pmt_irq_n++;
+
+ /* For LPI we need to save the tx status */
+ if (status & core_irq_tx_path_in_lpi_mode) {
+ priv->xstats.irq_tx_path_in_lpi_mode_n++;
+ priv->tx_path_in_lpi_mode = true;
+ }
+ if (status & core_irq_tx_path_exit_lpi_mode) {
+ priv->xstats.irq_tx_path_exit_lpi_mode_n++;
+ priv->tx_path_in_lpi_mode = false;
+ }
+ if (status & core_irq_rx_path_in_lpi_mode)
+ priv->xstats.irq_rx_path_in_lpi_mode_n++;
+ if (status & core_irq_rx_path_exit_lpi_mode)
+ priv->xstats.irq_rx_path_exit_lpi_mode_n++;
+ }
+ }
+ /* To handle DMA interrupts */
stmmac_dma_interrupt(priv);
return IRQ_HANDLED;
@@ -2152,6 +2301,9 @@ static int __init stmmac_cmdline_opt(char *str)
} else if (!strncmp(opt, "pause:", 6)) {
if (kstrtoul(opt + 6, 0, &pause))
goto err;
+ } else if (!strncmp(opt, "eee_timer:", 6)) {
+ if (kstrtoul(opt + 10, 0, &eee_timer))
+ goto err;
#ifdef CONFIG_STMMAC_TIMER
} else if (!strncmp(opt, "tmrate:", 7)) {
if (kstrtoul(opt + 7, 0, &tmrate))
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 20eb502..7d36163 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -156,6 +156,8 @@ static int stmmac_pltfr_probe(struct platform_device *pdev)
if (priv->wol_irq == -ENXIO)
priv->wol_irq = priv->dev->irq;
+ priv->lpi_irq = platform_get_irq_byname(pdev, "eth_lpi");
+
platform_set_drvdata(pdev, priv->dev);
pr_debug("STMMAC platform driver registration completed");
--
1.7.4.4
^ permalink raw reply related
* Re: [net-next.git 2/4 (v2)] stmmac: do not use strict_strtoul but kstrtoul
From: Eric Dumazet @ 2012-06-13 7:32 UTC (permalink / raw)
To: Giuseppe CAVALLARO; +Cc: netdev, bhutchings, rayagond, davem, yuvalmin
In-Reply-To: <1339571827-7162-3-git-send-email-peppe.cavallaro@st.com>
On Wed, 2012-06-13 at 09:17 +0200, Giuseppe CAVALLARO wrote:
> This patch replaces the obsolete strict_strtoul with kstrtoul.
>
> v2: also removed casting on kstrtoul.
>
> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
> ---
> drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 +-
> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 67 +++++++++-----------
> 2 files changed, 31 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> index 6d07ba2..1d70f64 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
> @@ -88,7 +88,7 @@ struct stmmac_priv {
> int synopsys_id;
> };
>
> -extern int phyaddr;
> +extern unsigned long int phyaddr;
>
> extern int stmmac_mdio_unregister(struct net_device *ndev);
> extern int stmmac_mdio_register(struct net_device *ndev);
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 8899e10..bd53003 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -80,39 +80,39 @@
>
> /* Module parameters */
> #define TX_TIMEO 5000 /* default 5 seconds */
> -static int watchdog = TX_TIMEO;
> -module_param(watchdog, int, S_IRUGO | S_IWUSR);
> +static unsigned long int watchdog = TX_TIMEO;
> +module_param(watchdog, ulong, S_IRUGO | S_IWUSR);
> MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds");
>
It seems you missed the kstrtouint() / kstrtoint() functions....
^ permalink raw reply
* Re: [net-next.git 2/4 (v2)] stmmac: do not use strict_strtoul but kstrtoul
From: Giuseppe CAVALLARO @ 2012-06-13 7:41 UTC (permalink / raw)
To: Eric Dumazet; +Cc: netdev, bhutchings, rayagond, davem, yuvalmin
In-Reply-To: <1339572727.22704.314.camel@edumazet-glaptop>
On 6/13/2012 9:32 AM, Eric Dumazet wrote:
> On Wed, 2012-06-13 at 09:17 +0200, Giuseppe CAVALLARO wrote:
>> This patch replaces the obsolete strict_strtoul with kstrtoul.
>>
>> v2: also removed casting on kstrtoul.
>>
>> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
>> ---
>> drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 +-
>> drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 67 +++++++++-----------
>> 2 files changed, 31 insertions(+), 38 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
>> index 6d07ba2..1d70f64 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
>> @@ -88,7 +88,7 @@ struct stmmac_priv {
>> int synopsys_id;
>> };
>>
>> -extern int phyaddr;
>> +extern unsigned long int phyaddr;
>>
>> extern int stmmac_mdio_unregister(struct net_device *ndev);
>> extern int stmmac_mdio_register(struct net_device *ndev);
>> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> index 8899e10..bd53003 100644
>> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
>> @@ -80,39 +80,39 @@
>>
>> /* Module parameters */
>> #define TX_TIMEO 5000 /* default 5 seconds */
>> -static int watchdog = TX_TIMEO;
>> -module_param(watchdog, int, S_IRUGO | S_IWUSR);
>> +static unsigned long int watchdog = TX_TIMEO;
>> +module_param(watchdog, ulong, S_IRUGO | S_IWUSR);
>> MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds");
>>
>
> It seems you missed the kstrtouint() / kstrtoint() functions....
yes i did, I'll resend it again.
thanks a lot
peppe
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
^ permalink raw reply
* Re: [PATCH 4/7] usbnet: remove EVENT_DEV_OPEN flag
From: Oliver Neukum @ 2012-06-13 7:40 UTC (permalink / raw)
To: Ming Lei; +Cc: David S. Miller, Greg Kroah-Hartman, netdev, linux-usb
In-Reply-To: <CACVXFVOjPxK3X5RF7DVJsTj3g3MyKg_49qtaev=ZBthsjBC=OA@mail.gmail.com>
Am Mittwoch, 13. Juni 2012, 06:47:18 schrieb Ming Lei:
> On Wed, Jun 13, 2012 at 10:12 AM, Ming Lei <tom.leiming@gmail.com> wrote:
> > On Wed, Jun 13, 2012 at 2:14 AM, Oliver Neukum <oliver@neukum.org> wrote:
> >> Am Dienstag, 12. Juni 2012, 03:19:42 schrieb Ming Lei:
> >>> EVENT_DEV_OPEN is introduced to mark if the interface is opened or
> >>> not, but we already have IFF_UP to handle it, so just
> >>> remove the flag and use IFF_UP.
> >>
> >> When is IFF_UP cleared? The flag is tested in usbnet_resume(),
> >
> > The flag is cleared just after usbnet_stop completes.
>
> Looks we can use the below to replace EVENT_DEV_OPEN:
>
> (netif_running((dev)->net) && ((dev)->net->flags & IFF_UP))
That goes down a bit into the interna of the network code.
If we do this, please encapsulated and with a big fat comment.
Regards
Oliver
^ permalink raw reply
* [net-next.git 1/4 (v5)] phy: add the EEE support and the way to access to the MMD registers.
From: Giuseppe CAVALLARO @ 2012-06-13 8:01 UTC (permalink / raw)
To: netdev
Cc: eric.dumazet, bhutchings, rayagond, davem, yuvalmin,
Giuseppe Cavallaro
In-Reply-To: <1339574463-1207-1-git-send-email-peppe.cavallaro@st.com>
This patch adds the support for the Energy-Efficient Ethernet (EEE)
to the Physical Abstraction Layer.
To support the EEE we have to access to the MMD registers 3.20 and
7.60/61. So two new functions have been added to read/write the MMD
registers (clause 45).
An Ethernet driver (I tested the stmmac) can invoke the phy_init_eee to properly
check if the EEE is supported by the PHYs and it can also set the clock
stop enable bit in the 3.0 register.
The phy_get_eee_err can be used for reporting the number of time where
the PHY failed to complete its normal wake sequence.
In the end, this patch also adds the EEE ethtool support implementing:
o phy_ethtool_set_eee
o phy_ethtool_get_eee
v1: initial patch
v2: fixed some errors especially on naming convention
v3: renamed again the mmd read/write functions thank to Ben's feedback
v4: moved file to phy.c and added the ethtool support.
v5: fixed phy_adv_to_eee, phy_eee_to_supported, phy_eee_to_adv return
values according to ethtool API (thanks to Ben's feedback).
Renamed some macros to avoid too long names.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
---
drivers/net/phy/phy.c | 261 +++++++++++++++++++++++++++++++++++++++++++++++++
include/linux/mdio.h | 21 +++-
include/linux/mii.h | 9 ++
include/linux/phy.h | 5 +
4 files changed, 292 insertions(+), 4 deletions(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 2e1c237..e5720f6 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -35,6 +35,7 @@
#include <linux/phy.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
+#include <linux/mdio.h>
#include <linux/atomic.h>
#include <asm/io.h>
@@ -967,3 +968,263 @@ void phy_state_machine(struct work_struct *work)
schedule_delayed_work(&phydev->state_queue, PHY_STATE_TIME * HZ);
}
+
+static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad,
+ int addr)
+{
+ /* Write the desired MMD Devad */
+ bus->write(bus, addr, MII_MMD_CTRL, devad);
+
+ /* Write the desired MMD register address */
+ bus->write(bus, addr, MII_MMD_DATA, prtad);
+
+ /* Select the Function : DATA with no post increment */
+ bus->write(bus, addr, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
+}
+
+/**
+ * phy_read_mmd_indirect - reads data from the MMC register (clause 22 to
+ * access to clause 45)
+ * @bus: the target MII bus
+ * @prtad: MMD Address
+ * @devad: MMD DEVAD
+ * @addr: PHY address on the MII bus
+ *
+ * Description: Reads data from the MMD regisetrs of the
+ * phy addr. To read these register we have:
+ * 1) Write reg 13 // DEVAD
+ * 2) Write reg 14 // MMD Address
+ * 3) Write reg 13 // MMD Data Command for MMD DEVAD
+ * 3) Read reg 14 // Read MMD data
+ */
+static int phy_read_mmd_indirect(struct mii_bus *bus, int prtad, int devad,
+ int addr)
+{
+ u32 ret;
+
+ mmd_phy_indirect(bus, prtad, devad, addr);
+
+ /* Read the content of the MMD's selected register */
+ ret = bus->read(bus, addr, MII_MMD_DATA);
+
+ return ret;
+}
+
+/**
+ * phy_write_mmd_indirect - writes data to the MMC register (clause 22 to
+ * access to clause 45)
+ * @bus: the target MII bus
+ * @prtad: MMD Address
+ * @devad: MMD DEVAD
+ * @addr: PHY address on the MII bus
+ * @data: data to write in the MMD register
+ *
+ * Description: Reads data from the MMD regisetrs of the
+ * phy addr. To read these register we have:
+ * 1) Write reg 13 // DEVAD
+ * 2) Write reg 14 // MMD Address
+ * 3) Write reg 13 // MMD Data Command for MMD DEVAD
+ * 3) Write reg 14 // Write MMD data
+ */
+static void phy_write_mmd_indirect(struct mii_bus *bus, int prtad, int devad,
+ int addr, u32 data)
+{
+ mmd_phy_indirect(bus, prtad, devad, addr);
+
+ /* Write the data into MMD's selected register */
+ bus->write(bus, addr, MII_MMD_DATA, data);
+}
+
+/* phy_init_eee
+ * @phydev: target phy_device struct
+ * @clk_stop_enable: PHY may stop the clock during LPI
+ *
+ * Description: it checks if the Energy-Efficient Ethernet (EEE)
+ * is supported by looking at the MMD registers 3.20 and 7.60/61
+ * and it programs the MMD register 3.0 setting the "Clock stop enable"
+ * bit if required.
+ * In fact, the clk_stop_enable can be passed to:
+ * 1 = The PHY may stop the clock during LPI
+ * 0 = Clock not stoppable
+ */
+int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
+{
+ int ret = -EPROTONOSUPPORT;
+
+ /* According to 802.3az,the EEE is supported only in full duplex-mode.
+ * Also EEE feature is active when core is operating with MII, GMII
+ * or RGMII.
+ */
+ if ((phydev->duplex == DUPLEX_FULL) &&
+ ((phydev->interface == PHY_INTERFACE_MODE_MII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_GMII) ||
+ (phydev->interface == PHY_INTERFACE_MODE_RGMII))) {
+ int eee_cap, eee_link;
+
+ /* EEE ability must be supported in both local and remote
+ * PHY devices.
+ */
+ eee_cap = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_LPABLE,
+ MDIO_MMD_AN, phydev->addr);
+ if (eee_cap < 0)
+ return eee_cap;
+
+ eee_link = phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_ABLE,
+ MDIO_MMD_PCS, phydev->addr);
+ if (eee_link < 0)
+ return eee_link;
+
+ if (eee_cap && eee_link) {
+ if (clk_stop_enable) {
+ /* Configure the PHY to stop receiving xMII
+ * clock while it is signaling LPI
+ */
+ int ctrl;
+ ctrl = phy_read_mmd_indirect(phydev->bus,
+ MDIO_CTRL1,
+ MDIO_MMD_PCS,
+ phydev->addr);
+ if (ctrl < 0)
+ return ctrl;
+
+ ctrl |= MDIO_PCS_CTRL1_CLKSTOP_EN;
+ phy_write_mmd_indirect(phydev->bus, MDIO_CTRL1,
+ MDIO_MMD_PCS,
+ phydev->addr, ctrl);
+ }
+
+ ret = 0; /* EEE supported */
+ }
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(phy_init_eee);
+
+/* phy_get_eee_err
+ * @phydev: target phy_device struct
+ *
+ * Description: it is to report the number of time where the PHY
+ * failed to complete its normal wake sequence.
+ */
+int phy_get_eee_err(struct phy_device *phydev)
+{
+ return phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_WK_ERR,
+ MDIO_MMD_PCS, phydev->addr);
+
+}
+EXPORT_SYMBOL(phy_get_eee_err);
+
+static u32 phy_eee_to_adv(u16 eee_adv)
+{
+ u32 adv = 0;
+
+ if (eee_adv & MDIO_EEE_100TX)
+ adv |= ADVERTISED_100baseT_Full;
+ if (eee_adv & MDIO_EEE_1000T)
+ adv |= ADVERTISED_1000baseT_Full;
+ if (eee_adv & MDIO_EEE_10GT)
+ adv |= ADVERTISED_10000baseT_Full;
+ if (eee_adv & MDIO_EEE_1000KX)
+ adv |= ADVERTISED_1000baseKX_Full;
+ if (eee_adv & MDIO_EEE_10GKX4)
+ adv |= ADVERTISED_10000baseKX4_Full;
+ if (eee_adv & MDIO_EEE_10GKR)
+ adv |= ADVERTISED_10000baseKR_Full;
+
+ return adv;
+}
+
+static u32 phy_eee_to_supported(u16 eee_supported)
+{
+ u32 supported = 0;
+
+ if (eee_supported & MDIO_EEE_100TX)
+ supported |= SUPPORTED_100baseT_Full;
+ if (eee_supported & MDIO_EEE_1000T)
+ supported |= SUPPORTED_1000baseT_Full;
+ if (eee_supported & MDIO_EEE_10GT)
+ supported |= SUPPORTED_10000baseT_Full;
+ if (eee_supported & MDIO_EEE_1000KX)
+ supported |= SUPPORTED_1000baseKX_Full;
+ if (eee_supported & MDIO_EEE_10GKX4)
+ supported |= SUPPORTED_10000baseKX4_Full;
+ if (eee_supported & MDIO_EEE_10GKR)
+ supported |= SUPPORTED_10000baseKR_Full;
+
+ return supported;
+}
+
+/* phy_ethtool_get_eee
+ * @phydev: target phy_device struct
+ * @data: ethtool_eee data
+ *
+ * Description: it reportes the Supported/Advertisement/LP Advertisement
+ * capabilities.
+ */
+int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data)
+{
+ int val;
+
+ /* Get Supported EEE */
+ val = phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_ABLE,
+ MDIO_MMD_PCS, phydev->addr);
+ if (val < 0)
+ return val;
+ data->supported = phy_eee_to_supported(val);
+
+ /* Get advertisement EEE */
+ val = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV,
+ MDIO_MMD_AN, phydev->addr);
+ if (val < 0)
+ return val;
+ data->advertised = phy_eee_to_adv(val);
+
+ /* Get LP advertisement EEE */
+ val = phy_read_mmd_indirect(phydev->bus, MDIO_AN_EEE_LPABLE,
+ MDIO_MMD_AN, phydev->addr);
+ if (val < 0)
+ return val;
+ data->lp_advertised = phy_eee_to_adv(val);
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_get_eee);
+
+static u16 phy_adv_to_eee(u32 adv)
+{
+ u16 reg = 0;
+
+ if (adv & ADVERTISED_100baseT_Full)
+ reg |= MDIO_EEE_100TX;
+ if (adv & ADVERTISED_1000baseT_Full)
+ reg |= MDIO_EEE_1000T;
+ if (adv & ADVERTISED_10000baseT_Full)
+ reg |= MDIO_EEE_10GT;
+ if (adv & ADVERTISED_1000baseKX_Full)
+ reg |= MDIO_EEE_1000KX;
+ if (adv & ADVERTISED_10000baseKX4_Full)
+ reg |= MDIO_EEE_10GKX4;
+ if (adv & ADVERTISED_10000baseKR_Full)
+ reg |= MDIO_EEE_10GKR;
+
+ return reg;
+}
+
+/* phy_ethtool_set_eee
+ * @phydev: target phy_device struct
+ * @data: ethtool_eee data
+ *
+ * Description: it is to program the Advertisement EEE register.
+ */
+int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
+{
+ int val;
+
+ val = phy_adv_to_eee(data->advertised);
+ phy_write_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV, MDIO_MMD_AN,
+ phydev->addr, val);
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_set_eee);
diff --git a/include/linux/mdio.h b/include/linux/mdio.h
index dfb9479..4ad8f0e 100644
--- a/include/linux/mdio.h
+++ b/include/linux/mdio.h
@@ -43,7 +43,11 @@
#define MDIO_PKGID2 15
#define MDIO_AN_ADVERTISE 16 /* AN advertising (base page) */
#define MDIO_AN_LPA 19 /* AN LP abilities (base page) */
+#define MDIO_PCS_EEE_ABLE 20 /* EEE Capability register */
+#define MDIO_PCS_EEE_WK_ERR 22 /* EEE wake error counter */
#define MDIO_PHYXS_LNSTAT 24 /* PHY XGXS lane state */
+#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */
+#define MDIO_AN_EEE_LPABLE 61 /* EEE link partner ability */
/* Media-dependent registers. */
#define MDIO_PMA_10GBT_SWAPPOL 130 /* 10GBASE-T pair swap & polarity */
@@ -56,7 +60,6 @@
#define MDIO_PCS_10GBRT_STAT2 33 /* 10GBASE-R/-T PCS status 2 */
#define MDIO_AN_10GBT_CTRL 32 /* 10GBASE-T auto-negotiation control */
#define MDIO_AN_10GBT_STAT 33 /* 10GBASE-T auto-negotiation status */
-#define MDIO_AN_EEE_ADV 60 /* EEE advertisement */
/* LASI (Link Alarm Status Interrupt) registers, defined by XENPAK MSA. */
#define MDIO_PMA_LASI_RXCTRL 0x9000 /* RX_ALARM control */
@@ -82,6 +85,7 @@
#define MDIO_AN_CTRL1_RESTART BMCR_ANRESTART
#define MDIO_AN_CTRL1_ENABLE BMCR_ANENABLE
#define MDIO_AN_CTRL1_XNP 0x2000 /* Enable extended next page */
+#define MDIO_PCS_CTRL1_CLKSTOP_EN 0x400 /* Stop the clock during LPI */
/* 10 Gb/s */
#define MDIO_CTRL1_SPEED10G (MDIO_CTRL1_SPEEDSELEXT | 0x00)
@@ -237,9 +241,18 @@
#define MDIO_AN_10GBT_STAT_MS 0x4000 /* Master/slave config */
#define MDIO_AN_10GBT_STAT_MSFLT 0x8000 /* Master/slave config fault */
-/* AN EEE Advertisement register. */
-#define MDIO_AN_EEE_ADV_100TX 0x0002 /* Advertise 100TX EEE cap */
-#define MDIO_AN_EEE_ADV_1000T 0x0004 /* Advertise 1000T EEE cap */
+/* EEE Supported/Advertisement/LP Advertisement registers.
+ *
+ * EEE capability Register (3.20), Advertisement (7.60) and
+ * Link partner ability (7.61) registers have and can use the same identical
+ * bit masks.
+ */
+#define MDIO_EEE_100TX 0x0002 /* 100TX EEE cap */
+#define MDIO_EEE_1000T 0x0004 /* 1000T EEE cap */
+#define MDIO_EEE_10GT 0x0008 /* 10GT EEE cap */
+#define MDIO_EEE_1000KX 0x0010 /* 1000KX EEE cap */
+#define MDIO_EEE_10GKX4 0x0020 /* 10G KX4 EEE cap */
+#define MDIO_EEE_10GKR 0x0040 /* 10G KR EEE cap */
/* LASI RX_ALARM control/status registers. */
#define MDIO_PMA_LASI_RX_PHYXSLFLT 0x0001 /* PHY XS RX local fault */
diff --git a/include/linux/mii.h b/include/linux/mii.h
index 2783eca..8ef3a7a 100644
--- a/include/linux/mii.h
+++ b/include/linux/mii.h
@@ -21,6 +21,8 @@
#define MII_EXPANSION 0x06 /* Expansion register */
#define MII_CTRL1000 0x09 /* 1000BASE-T control */
#define MII_STAT1000 0x0a /* 1000BASE-T status */
+#define MII_MMD_CTRL 0x0d /* MMD Access Control Register */
+#define MII_MMD_DATA 0x0e /* MMD Access Data Register */
#define MII_ESTATUS 0x0f /* Extended Status */
#define MII_DCOUNTER 0x12 /* Disconnect counter */
#define MII_FCSCOUNTER 0x13 /* False carrier counter */
@@ -141,6 +143,13 @@
#define FLOW_CTRL_TX 0x01
#define FLOW_CTRL_RX 0x02
+/* MMD Access Control register fields */
+#define MII_MMD_CTRL_DEVAD_MASK 0x1f /* Mask MMD DEVAD*/
+#define MII_MMD_CTRL_ADDR 0x0000 /* Address */
+#define MII_MMD_CTRL_NOINCR 0x4000 /* no post increment */
+#define MII_MMD_CTRL_INCR_RDWT 0x8000 /* post increment on reads & writes */
+#define MII_MMD_CTRL_INCR_ON_WT 0xC000 /* post increment on writes only */
+
/* This structure is used in all SIOCxMIIxxx ioctl calls */
struct mii_ioctl_data {
__u16 phy_id;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index c291cae..97fc4cf 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -532,6 +532,11 @@ int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
int (*run)(struct phy_device *));
int phy_scan_fixups(struct phy_device *phydev);
+int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable);
+int phy_get_eee_err(struct phy_device *phydev);
+int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data);
+int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data);
+
int __init mdio_bus_init(void);
void mdio_bus_exit(void);
--
1.7.4.4
^ permalink raw reply related
* [net-next.git 0/4] EEE for PAL and stmmac (v3)
From: Giuseppe CAVALLARO @ 2012-06-13 8:00 UTC (permalink / raw)
To: netdev
Cc: eric.dumazet, bhutchings, rayagond, davem, yuvalmin,
Giuseppe Cavallaro
These patches add the EEE support in the stmmac device driver
restoring an old work I had done some months ago and not
completed in time.
I've tested all on ST STB with the IC+ 101G PHY device that has
this feature.
The initial EEE support for the stmmac has been written by Rayagond
but I have reworked all his code adding new parts and especially
performing tests on a real hardware. Thx Rayagond!
In these patches, we can see that the stmmac supports the EEE
only if the DMA HW capability register says that this
feature is actually available. In that case, the driver can enter
in the Tx LPI mode by using a timer as recommended by Synopsys.
Note that EEE is supported in new chip generations; in particular
I used the 3.61a.
At any rate, further information about how the driver treats the EEE
can be found in the stmmac.txt file (there is a patch for that).
Another patch is for Physical Abstraction Layer now able to
manage the MMD registers (clause 45); it also provides the ethtool
support to manage supported/advertisement/lp adv features.
v3: fixed the "stmmac: do not use strict_strtoul but kstrtoint"
to use the kstrtoint.
Giuseppe Cavallaro (4):
phy: add the EEE support and the way to access to the MMD registers.
stmmac: do not use strict_strtoul but kstrtoint
stmmac: update the driver Documentation and add EEE
stmmac: add the Energy Efficient Ethernet support
Documentation/networking/stmmac.txt | 36 +++-
drivers/net/ethernet/stmicro/stmmac/common.h | 31 +++-
drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 20 ++
.../net/ethernet/stmicro/stmmac/dwmac1000_core.c | 101 +++++++-
.../net/ethernet/stmicro/stmmac/dwmac100_core.c | 4 +-
drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 8 +
.../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 57 +++++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 193 +++++++++++++--
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 2 +
drivers/net/phy/phy.c | 261 ++++++++++++++++++++
include/linux/mdio.h | 21 ++-
include/linux/mii.h | 9 +
include/linux/phy.h | 5 +
14 files changed, 704 insertions(+), 45 deletions(-)
--
1.7.4.4
^ permalink raw reply
* [net-next.git 2/4 (v3)] stmmac: do not use strict_strtoul but kstrtoint
From: Giuseppe CAVALLARO @ 2012-06-13 8:01 UTC (permalink / raw)
To: netdev
Cc: eric.dumazet, bhutchings, rayagond, davem, yuvalmin,
Giuseppe Cavallaro
In-Reply-To: <1339574463-1207-1-git-send-email-peppe.cavallaro@st.com>
This patch replaces the obsolete strict_strtoul with kstrtoint.
v2: also removed casting on kstrtoul.
v3: use kstrtoint instead of kstrtoul due to all vars are integer.
thanks to E. Dumazet.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 27 +++++++-------------
1 files changed, 10 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 8899e10..4df9aa5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2126,42 +2126,35 @@ static int __init stmmac_cmdline_opt(char *str)
return -EINVAL;
while ((opt = strsep(&str, ",")) != NULL) {
if (!strncmp(opt, "debug:", 6)) {
- if (strict_strtoul(opt + 6, 0, (unsigned long *)&debug))
+ if (kstrtoint(opt + 6, 0, &debug))
goto err;
} else if (!strncmp(opt, "phyaddr:", 8)) {
- if (strict_strtoul(opt + 8, 0,
- (unsigned long *)&phyaddr))
+ if (kstrtoint(opt + 8, 0, &phyaddr))
goto err;
} else if (!strncmp(opt, "dma_txsize:", 11)) {
- if (strict_strtoul(opt + 11, 0,
- (unsigned long *)&dma_txsize))
+ if (kstrtoint(opt + 11, 0, &dma_txsize))
goto err;
} else if (!strncmp(opt, "dma_rxsize:", 11)) {
- if (strict_strtoul(opt + 11, 0,
- (unsigned long *)&dma_rxsize))
+ if (kstrtoint(opt + 11, 0, &dma_rxsize))
goto err;
} else if (!strncmp(opt, "buf_sz:", 7)) {
- if (strict_strtoul(opt + 7, 0,
- (unsigned long *)&buf_sz))
+ if (kstrtoint(opt + 7, 0, &buf_sz))
goto err;
} else if (!strncmp(opt, "tc:", 3)) {
- if (strict_strtoul(opt + 3, 0, (unsigned long *)&tc))
+ if (kstrtoint(opt + 3, 0, &tc))
goto err;
} else if (!strncmp(opt, "watchdog:", 9)) {
- if (strict_strtoul(opt + 9, 0,
- (unsigned long *)&watchdog))
+ if (kstrtoint(opt + 9, 0, &watchdog))
goto err;
} else if (!strncmp(opt, "flow_ctrl:", 10)) {
- if (strict_strtoul(opt + 10, 0,
- (unsigned long *)&flow_ctrl))
+ if (kstrtoint(opt + 10, 0, &flow_ctrl))
goto err;
} else if (!strncmp(opt, "pause:", 6)) {
- if (strict_strtoul(opt + 6, 0, (unsigned long *)&pause))
+ if (kstrtoint(opt + 6, 0, &pause))
goto err;
#ifdef CONFIG_STMMAC_TIMER
} else if (!strncmp(opt, "tmrate:", 7)) {
- if (strict_strtoul(opt + 7, 0,
- (unsigned long *)&tmrate))
+ if (kstrtoint(opt + 7, 0, &tmrate))
goto err;
#endif
}
--
1.7.4.4
^ permalink raw reply related
* [net-next.git 3/4] stmmac: update the driver Documentation and add EEE
From: Giuseppe CAVALLARO @ 2012-06-13 8:01 UTC (permalink / raw)
To: netdev
Cc: eric.dumazet, bhutchings, rayagond, davem, yuvalmin,
Giuseppe Cavallaro
In-Reply-To: <1339574463-1207-1-git-send-email-peppe.cavallaro@st.com>
This patch updates the stmmac's documentation adding
some missing files in the section used to describe the
internal driver's structure.
Also the patch adds a new section to describe the EEE support.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
---
Documentation/networking/stmmac.txt | 36 +++++++++++++++++++++++++++++-----
1 files changed, 30 insertions(+), 6 deletions(-)
diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt
index 5cb9a19..c676b9c 100644
--- a/Documentation/networking/stmmac.txt
+++ b/Documentation/networking/stmmac.txt
@@ -257,9 +257,11 @@ reset procedure etc).
o Makefile
o stmmac_main.c: main network device driver;
o stmmac_mdio.c: mdio functions;
+ o stmmac_pci: PCI driver;
+ o stmmac_platform.c: platform driver
o stmmac_ethtool.c: ethtool support;
o stmmac_timer.[ch]: timer code used for mitigating the driver dma interrupts
- Only tested on ST40 platforms based.
+ (only tested on ST40 platforms based);
o stmmac.h: private driver structure;
o common.h: common definitions and VFTs;
o descs.h: descriptor structure definitions;
@@ -269,9 +271,11 @@ reset procedure etc).
o dwmac100_core: MAC 100 core and dma code;
o dwmac100_dma.c: dma funtions for the MAC chip;
o dwmac1000.h: specific header file for the MAC;
- o dwmac_lib.c: generic DMA functions shared among chips
- o enh_desc.c: functions for handling enhanced descriptors
- o norm_desc.c: functions for handling normal descriptors
+ o dwmac_lib.c: generic DMA functions shared among chips;
+ o enh_desc.c: functions for handling enhanced descriptors;
+ o norm_desc.c: functions for handling normal descriptors;
+ o chain_mode.c/ring_mode.c:: functions to manage RING/CHAINED modes;
+ o mmc_core.c/mmc.h: Management MAC Counters;
5) Debug Information
@@ -304,7 +308,27 @@ All these are only useful during the developing stage
and should never enabled inside the code for general usage.
In fact, these can generate an huge amount of debug messages.
-6) TODO:
+6) Energy Efficient Ethernet
+
+Energy Efficient Ethernet(EEE) enables IEEE 802.3 MAC sublayer along
+with a family of Physical layer to operate in the Low power Idle(LPI)
+mode. The EEE mode supports the IEEE 802.3 MAC operation at 100Mbps,
+1000Mbps & 10Gbps.
+
+The LPI mode allows power saving by switching off parts of the
+communication device functionality when there is no data to be
+transmitted & received. The system on both the side of the link can
+disable some functionalities & save power during the period of low-link
+utilization. The MAC controls whether the system should enter or exit
+the LPI mode & communicate this to PHY.
+
+As soon as the interface is opened, the driver verifies if the EEE can
+be supported. This is done by looking at both the DMA HW capability
+register and the PHY devices MCD registers.
+To enter in Tx LPI mode the driver needs to have a software timer
+that enable and disable the LPI mode when there is nothing to be
+transmitted.
+
+7) TODO:
o XGMAC is not supported.
- o Add the EEE - Energy Efficient Ethernet
o Add the PTP - precision time protocol
--
1.7.4.4
^ permalink raw reply related
* [net-next.git 4/4 (v5)] stmmac: add the Energy Efficient Ethernet support
From: Giuseppe CAVALLARO @ 2012-06-13 8:01 UTC (permalink / raw)
To: netdev
Cc: eric.dumazet, bhutchings, rayagond, davem, yuvalmin,
Giuseppe Cavallaro
In-Reply-To: <1339574463-1207-1-git-send-email-peppe.cavallaro@st.com>
This patch adds the Energy Efficient Ethernet support to the stmmac.
Please see the driver's documentation for further details about this support
in the driver.
Thanks also goes to Rayagond Kokatanur for his first implementation.
Note:
to clearly manage and expose the lpi interrupt status and eee ethtool
stats I've had to do some modifications to the driver's design and I
found really useful to move other parts of the code (e.g. mmc irq stat)
in the main directly. So this means that some core has been reworked
to introduce the EEE.
v1: initial patch
v2: fixed some sparse issues (typos)
v3: erroneously sent the v2 renamed as v3
v4:
o Fixed the return value of the stmmac_eee_init as suggested by D.Miller
o Totally reviewed the ethtool support for EEE
o Added a new internal parameter to tune the SW timer for TX LPI.
v5: do not change any eee setting in case of the stmmac_ethtool_op_set_eee fails
(it has to return -EOPNOTSUPP in that case).
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
---
drivers/net/ethernet/stmicro/stmmac/common.h | 31 ++++-
drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 20 +++
.../net/ethernet/stmicro/stmmac/dwmac1000_core.c | 101 +++++++++++-
.../net/ethernet/stmicro/stmmac/dwmac100_core.c | 4 +-
drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h | 1 +
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 8 +
.../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 57 +++++++
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 166 +++++++++++++++++++-
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 2 +
9 files changed, 372 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h
index bcd54d6..e2d0832 100644
--- a/drivers/net/ethernet/stmicro/stmmac/common.h
+++ b/drivers/net/ethernet/stmicro/stmmac/common.h
@@ -95,6 +95,16 @@ struct stmmac_extra_stats {
unsigned long poll_n;
unsigned long sched_timer_n;
unsigned long normal_irq_n;
+ unsigned long mmc_tx_irq_n;
+ unsigned long mmc_rx_irq_n;
+ unsigned long mmc_rx_csum_offload_irq_n;
+ /* EEE */
+ unsigned long irq_receive_pmt_irq_n;
+ unsigned long irq_tx_path_in_lpi_mode_n;
+ unsigned long irq_tx_path_exit_lpi_mode_n;
+ unsigned long irq_rx_path_in_lpi_mode_n;
+ unsigned long irq_rx_path_exit_lpi_mode_n;
+ unsigned long phy_eee_wakeup_error_n;
};
/* CSR Frequency Access Defines*/
@@ -162,6 +172,17 @@ enum tx_dma_irq_status {
handle_tx_rx = 3,
};
+enum core_specific_irq_mask {
+ core_mmc_tx_irq = 1,
+ core_mmc_rx_irq = 2,
+ core_mmc_rx_csum_offload_irq = 4,
+ core_irq_receive_pmt_irq = 8,
+ core_irq_tx_path_in_lpi_mode = 16,
+ core_irq_tx_path_exit_lpi_mode = 32,
+ core_irq_rx_path_in_lpi_mode = 64,
+ core_irq_rx_path_exit_lpi_mode = 128,
+};
+
/* DMA HW capabilities */
struct dma_features {
unsigned int mbps_10_100;
@@ -208,6 +229,10 @@ struct dma_features {
#define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */
#define MAC_RNABLE_RX 0x00000004 /* Receiver Enable */
+/* Default LPI timers */
+#define STMMAC_DEFAULT_LIT_LS_TIMER 0x3E8
+#define STMMAC_DEFAULT_TWT_LS_TIMER 0x0
+
struct stmmac_desc_ops {
/* DMA RX descriptor ring initialization */
void (*init_rx_desc) (struct dma_desc *p, unsigned int ring_size,
@@ -278,7 +303,7 @@ struct stmmac_ops {
/* Dump MAC registers */
void (*dump_regs) (void __iomem *ioaddr);
/* Handle extra events on specific interrupts hw dependent */
- void (*host_irq_status) (void __iomem *ioaddr);
+ int (*host_irq_status) (void __iomem *ioaddr);
/* Multicast filter setting */
void (*set_filter) (struct net_device *dev, int id);
/* Flow control setting */
@@ -291,6 +316,10 @@ struct stmmac_ops {
unsigned int reg_n);
void (*get_umac_addr) (void __iomem *ioaddr, unsigned char *addr,
unsigned int reg_n);
+ void (*set_eee_mode) (void __iomem *ioaddr);
+ void (*reset_eee_mode) (void __iomem *ioaddr);
+ void (*set_eee_timer) (void __iomem *ioaddr, int ls, int tw);
+ void (*set_eee_pls) (void __iomem *ioaddr, int link);
};
struct mac_link {
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
index 23478bf..f90fcb5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h
@@ -36,6 +36,7 @@
#define GMAC_INT_STATUS 0x00000038 /* interrupt status register */
enum dwmac1000_irq_status {
+ lpiis_irq = 0x400,
time_stamp_irq = 0x0200,
mmc_rx_csum_offload_irq = 0x0080,
mmc_tx_irq = 0x0040,
@@ -60,6 +61,25 @@ enum power_event {
power_down = 0x00000001,
};
+/* Energy Efficient Ethernet (EEE)
+ *
+ * LPI status, timer and control register offset
+ */
+#define LPI_CTRL_STATUS 0x0030
+#define LPI_TIMER_CTRL 0x0034
+
+/* LPI control and status defines */
+#define LPI_CTRL_STATUS_LPITXA 0x00080000 /* Enable LPI TX Automate */
+#define LPI_CTRL_STATUS_PLSEN 0x00040000 /* Enable PHY Link Status */
+#define LPI_CTRL_STATUS_PLS 0x00020000 /* PHY Link Status */
+#define LPI_CTRL_STATUS_LPIEN 0x00010000 /* LPI Enable */
+#define LPI_CTRL_STATUS_RLPIST 0x00000200 /* Receive LPI state */
+#define LPI_CTRL_STATUS_TLPIST 0x00000100 /* Transmit LPI state */
+#define LPI_CTRL_STATUS_RLPIEX 0x00000008 /* Receive LPI Exit */
+#define LPI_CTRL_STATUS_RLPIEN 0x00000004 /* Receive LPI Entry */
+#define LPI_CTRL_STATUS_TLPIEX 0x00000002 /* Transmit LPI Exit */
+#define LPI_CTRL_STATUS_TLPIEN 0x00000001 /* Transmit LPI Entry */
+
/* GMAC HW ADDR regs */
#define GMAC_ADDR_HIGH(reg) (((reg > 15) ? 0x00000800 : 0x00000040) + \
(reg * 8))
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index b5e4d02..bfe0226 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -194,26 +194,107 @@ static void dwmac1000_pmt(void __iomem *ioaddr, unsigned long mode)
}
-static void dwmac1000_irq_status(void __iomem *ioaddr)
+static int dwmac1000_irq_status(void __iomem *ioaddr)
{
u32 intr_status = readl(ioaddr + GMAC_INT_STATUS);
+ int status = 0;
/* Not used events (e.g. MMC interrupts) are not handled. */
- if ((intr_status & mmc_tx_irq))
- CHIP_DBG(KERN_DEBUG "GMAC: MMC tx interrupt: 0x%08x\n",
+ if ((intr_status & mmc_tx_irq)) {
+ CHIP_DBG(KERN_INFO "GMAC: MMC tx interrupt: 0x%08x\n",
readl(ioaddr + GMAC_MMC_TX_INTR));
- if (unlikely(intr_status & mmc_rx_irq))
- CHIP_DBG(KERN_DEBUG "GMAC: MMC rx interrupt: 0x%08x\n",
+ status |= core_mmc_tx_irq;
+ }
+ if (unlikely(intr_status & mmc_rx_irq)) {
+ CHIP_DBG(KERN_INFO "GMAC: MMC rx interrupt: 0x%08x\n",
readl(ioaddr + GMAC_MMC_RX_INTR));
- if (unlikely(intr_status & mmc_rx_csum_offload_irq))
- CHIP_DBG(KERN_DEBUG "GMAC: MMC rx csum offload: 0x%08x\n",
+ status |= core_mmc_rx_irq;
+ }
+ if (unlikely(intr_status & mmc_rx_csum_offload_irq)) {
+ CHIP_DBG(KERN_INFO "GMAC: MMC rx csum offload: 0x%08x\n",
readl(ioaddr + GMAC_MMC_RX_CSUM_OFFLOAD));
+ status |= core_mmc_rx_csum_offload_irq;
+ }
if (unlikely(intr_status & pmt_irq)) {
- CHIP_DBG(KERN_DEBUG "GMAC: received Magic frame\n");
+ CHIP_DBG(KERN_INFO "GMAC: received Magic frame\n");
/* clear the PMT bits 5 and 6 by reading the PMT
* status register. */
readl(ioaddr + GMAC_PMT);
+ status |= core_irq_receive_pmt_irq;
}
+ /* MAC trx/rx EEE LPI entry/exit interrupts */
+ if (intr_status & lpiis_irq) {
+ /* Clean LPI interrupt by reading the Reg 12 */
+ u32 lpi_status = readl(ioaddr + LPI_CTRL_STATUS);
+
+ if (lpi_status & LPI_CTRL_STATUS_TLPIEN) {
+ CHIP_DBG(KERN_INFO "GMAC TX entered in LPI\n");
+ status |= core_irq_tx_path_in_lpi_mode;
+ }
+ if (lpi_status & LPI_CTRL_STATUS_TLPIEX) {
+ CHIP_DBG(KERN_INFO "GMAC TX exit from LPI\n");
+ status |= core_irq_tx_path_exit_lpi_mode;
+ }
+ if (lpi_status & LPI_CTRL_STATUS_RLPIEN) {
+ CHIP_DBG(KERN_INFO "GMAC RX entered in LPI\n");
+ status |= core_irq_rx_path_in_lpi_mode;
+ }
+ if (lpi_status & LPI_CTRL_STATUS_RLPIEX) {
+ CHIP_DBG(KERN_INFO "GMAC RX exit from LPI\n");
+ status |= core_irq_rx_path_exit_lpi_mode;
+ }
+ }
+
+ return status;
+}
+
+static void dwmac1000_set_eee_mode(void __iomem *ioaddr)
+{
+ u32 value;
+
+ /* Enable the link status receive on RGMII, SGMII ore SMII
+ * receive path and instruct the transmit to enter in LPI
+ * state. */
+ value = readl(ioaddr + LPI_CTRL_STATUS);
+ value |= LPI_CTRL_STATUS_LPIEN | LPI_CTRL_STATUS_LPITXA;
+ writel(value, ioaddr + LPI_CTRL_STATUS);
+}
+
+static void dwmac1000_reset_eee_mode(void __iomem *ioaddr)
+{
+ u32 value;
+
+ value = readl(ioaddr + LPI_CTRL_STATUS);
+ value &= ~(LPI_CTRL_STATUS_LPIEN | LPI_CTRL_STATUS_LPITXA);
+ writel(value, ioaddr + LPI_CTRL_STATUS);
+}
+
+static void dwmac1000_set_eee_pls(void __iomem *ioaddr, int link)
+{
+ u32 value;
+
+ value = readl(ioaddr + LPI_CTRL_STATUS);
+
+ if (link)
+ value |= LPI_CTRL_STATUS_PLS;
+ else
+ value &= ~LPI_CTRL_STATUS_PLS;
+
+ writel(value, ioaddr + LPI_CTRL_STATUS);
+}
+
+static void dwmac1000_set_eee_timer(void __iomem *ioaddr, int ls, int tw)
+{
+ int value = ((tw & 0xffff)) | ((ls & 0x7ff) << 16);
+
+ /* Program the timers in the LPI timer control register:
+ * LS: minimum time (ms) for which the link
+ * status from PHY should be ok before transmitting
+ * the LPI pattern.
+ * TW: minimum time (us) for which the core waits
+ * after it has stopped transmitting the LPI pattern.
+ */
+ writel(value, ioaddr + LPI_TIMER_CTRL);
}
static const struct stmmac_ops dwmac1000_ops = {
@@ -226,6 +307,10 @@ static const struct stmmac_ops dwmac1000_ops = {
.pmt = dwmac1000_pmt,
.set_umac_addr = dwmac1000_set_umac_addr,
.get_umac_addr = dwmac1000_get_umac_addr,
+ .set_eee_mode = dwmac1000_set_eee_mode,
+ .reset_eee_mode = dwmac1000_reset_eee_mode,
+ .set_eee_timer = dwmac1000_set_eee_timer,
+ .set_eee_pls = dwmac1000_set_eee_pls,
};
struct mac_device_info *dwmac1000_setup(void __iomem *ioaddr)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
index 19e0f4e..f83210e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c
@@ -72,9 +72,9 @@ static int dwmac100_rx_ipc_enable(void __iomem *ioaddr)
return 0;
}
-static void dwmac100_irq_status(void __iomem *ioaddr)
+static int dwmac100_irq_status(void __iomem *ioaddr)
{
- return;
+ return 0;
}
static void dwmac100_set_umac_addr(void __iomem *ioaddr, unsigned char *addr,
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
index 6e0360f..e678ce3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h
@@ -70,6 +70,7 @@
#define DMA_INTR_DEFAULT_MASK (DMA_INTR_NORMAL | DMA_INTR_ABNORMAL)
/* DMA Status register defines */
+#define DMA_STATUS_GLPII 0x40000000 /* GMAC LPI interrupt */
#define DMA_STATUS_GPI 0x10000000 /* PMT interrupt */
#define DMA_STATUS_GMI 0x08000000 /* MMC interrupt */
#define DMA_STATUS_GLI 0x04000000 /* GMAC Line interface int */
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index 6d07ba2..777771a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -86,6 +86,12 @@ struct stmmac_priv {
#endif
int clk_csr;
int synopsys_id;
+ struct timer_list eee_ctrl_timer;
+ bool tx_path_in_lpi_mode;
+ int lpi_irq;
+ int eee_enabled;
+ int eee_active;
+ int tx_lpi_timer;
};
extern int phyaddr;
@@ -105,6 +111,8 @@ int stmmac_dvr_remove(struct net_device *ndev);
struct stmmac_priv *stmmac_dvr_probe(struct device *device,
struct plat_stmmacenet_data *plat_dat,
void __iomem *addr);
+void stmmac_disable_eee_mode(struct stmmac_priv *priv);
+bool stmmac_eee_init(struct stmmac_priv *priv);
#ifdef CONFIG_HAVE_CLK
static inline int stmmac_clk_enable(struct stmmac_priv *priv)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index ce43184..76fd61a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -93,6 +93,16 @@ static const struct stmmac_stats stmmac_gstrings_stats[] = {
STMMAC_STAT(poll_n),
STMMAC_STAT(sched_timer_n),
STMMAC_STAT(normal_irq_n),
+ STMMAC_STAT(normal_irq_n),
+ STMMAC_STAT(mmc_tx_irq_n),
+ STMMAC_STAT(mmc_rx_irq_n),
+ STMMAC_STAT(mmc_rx_csum_offload_irq_n),
+ STMMAC_STAT(irq_receive_pmt_irq_n),
+ STMMAC_STAT(irq_tx_path_in_lpi_mode_n),
+ STMMAC_STAT(irq_tx_path_exit_lpi_mode_n),
+ STMMAC_STAT(irq_rx_path_in_lpi_mode_n),
+ STMMAC_STAT(irq_rx_path_exit_lpi_mode_n),
+ STMMAC_STAT(phy_eee_wakeup_error_n),
};
#define STMMAC_STATS_LEN ARRAY_SIZE(stmmac_gstrings_stats)
@@ -366,6 +376,11 @@ static void stmmac_get_ethtool_stats(struct net_device *dev,
(*(u32 *)p);
}
}
+ if (priv->eee_enabled) {
+ int val = phy_get_eee_err(priv->phydev);
+ if (val)
+ priv->xstats.phy_eee_wakeup_error_n = val;
+ }
}
for (i = 0; i < STMMAC_STATS_LEN; i++) {
char *p = (char *)priv + stmmac_gstrings_stats[i].stat_offset;
@@ -464,6 +479,46 @@ static int stmmac_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
return 0;
}
+static int stmmac_ethtool_op_get_eee(struct net_device *dev,
+ struct ethtool_eee *edata)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ if (!priv->dma_cap.eee)
+ return -EOPNOTSUPP;
+
+ edata->eee_enabled = priv->eee_enabled;
+ edata->eee_active = priv->eee_active;
+ edata->tx_lpi_timer = priv->tx_lpi_timer;
+
+ return phy_ethtool_get_eee(priv->phydev, edata);
+}
+
+static int stmmac_ethtool_op_set_eee(struct net_device *dev,
+ struct ethtool_eee *edata)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ priv->eee_enabled = edata->eee_enabled;
+
+ if (!priv->eee_enabled)
+ stmmac_disable_eee_mode(priv);
+ else {
+ /* We are asking for enabling the EEE but it is safe
+ * to verify all by invoking the eee_init function.
+ * In case of failure it will return an error.
+ */
+ priv->eee_enabled = stmmac_eee_init(priv);
+ if (!priv->eee_enabled)
+ return -EOPNOTSUPP;
+
+ /* Do not change tx_lpi_timer in case of failure */
+ priv->tx_lpi_timer = edata->tx_lpi_timer;
+ }
+
+ return phy_ethtool_set_eee(priv->phydev, edata);
+}
+
static const struct ethtool_ops stmmac_ethtool_ops = {
.begin = stmmac_check_if_running,
.get_drvinfo = stmmac_ethtool_getdrvinfo,
@@ -480,6 +535,8 @@ static const struct ethtool_ops stmmac_ethtool_ops = {
.get_strings = stmmac_get_strings,
.get_wol = stmmac_get_wol,
.set_wol = stmmac_set_wol,
+ .get_eee = stmmac_ethtool_op_get_eee,
+ .set_eee = stmmac_ethtool_op_set_eee,
.get_sset_count = stmmac_get_sset_count,
.get_ts_info = ethtool_op_get_ts_info,
};
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 4df9aa5..6c3584b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -134,6 +134,12 @@ static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
NETIF_MSG_LINK | NETIF_MSG_IFUP |
NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
+#define STMMAC_DEFAULT_LPI_TIMER 1000
+static int eee_timer = STMMAC_DEFAULT_LPI_TIMER;
+module_param(eee_timer, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(eee_timer, "LPI tx expiration time in msec");
+#define STMMAC_LPI_TIMER(x) (jiffies + msecs_to_jiffies(x))
+
static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
#ifdef CONFIG_STMMAC_DEBUG_FS
@@ -162,6 +168,8 @@ static void stmmac_verify_args(void)
flow_ctrl = FLOW_OFF;
if (unlikely((pause < 0) || (pause > 0xffff)))
pause = PAUSE_TIME;
+ if (eee_timer < 0)
+ eee_timer = STMMAC_DEFAULT_LPI_TIMER;
}
static void stmmac_clk_csr_set(struct stmmac_priv *priv)
@@ -230,6 +238,85 @@ static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv *priv)
phydev->speed);
}
+static void stmmac_enable_eee_mode(struct stmmac_priv *priv)
+{
+ /* Check and enter in LPI mode */
+ if ((priv->dirty_tx == priv->cur_tx) &&
+ (priv->tx_path_in_lpi_mode == false))
+ priv->hw->mac->set_eee_mode(priv->ioaddr);
+}
+
+void stmmac_disable_eee_mode(struct stmmac_priv *priv)
+{
+ /* Exit and disable EEE in case of we are are in LPI state. */
+ priv->hw->mac->reset_eee_mode(priv->ioaddr);
+ del_timer_sync(&priv->eee_ctrl_timer);
+ priv->tx_path_in_lpi_mode = false;
+}
+
+/**
+ * stmmac_eee_ctrl_timer
+ * @arg : data hook
+ * Description:
+ * If there is no data transfer and if we are not in LPI state,
+ * then MAC Transmitter can be moved to LPI state.
+ */
+static void stmmac_eee_ctrl_timer(unsigned long arg)
+{
+ struct stmmac_priv *priv = (struct stmmac_priv *)arg;
+
+ stmmac_enable_eee_mode(priv);
+ mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_TIMER(eee_timer));
+}
+
+/**
+ * stmmac_eee_init
+ * @priv: private device pointer
+ * Description:
+ * If the EEE support has been enabled while configuring the driver,
+ * if the GMAC actually supports the EEE (from the HW cap reg) and the
+ * phy can also manage EEE, so enable the LPI state and start the timer
+ * to verify if the tx path can enter in LPI state.
+ */
+bool stmmac_eee_init(struct stmmac_priv *priv)
+{
+ bool ret = false;
+
+ /* MAC core supports the EEE feature. */
+ if (priv->dma_cap.eee) {
+ /* Check if the PHY supports EEE */
+ if (phy_init_eee(priv->phydev, 1))
+ goto out;
+
+ priv->eee_active = 1;
+ init_timer(&priv->eee_ctrl_timer);
+ priv->eee_ctrl_timer.function = stmmac_eee_ctrl_timer;
+ priv->eee_ctrl_timer.data = (unsigned long)priv;
+ priv->eee_ctrl_timer.expires = STMMAC_LPI_TIMER(eee_timer);
+ add_timer(&priv->eee_ctrl_timer);
+
+ priv->hw->mac->set_eee_timer(priv->ioaddr,
+ STMMAC_DEFAULT_LIT_LS_TIMER,
+ priv->tx_lpi_timer);
+
+ pr_info("stmmac: Energy-Efficient Ethernet initialized\n");
+
+ ret = true;
+ }
+out:
+ return ret;
+}
+
+static void stmmac_eee_adjust(struct stmmac_priv *priv)
+{
+ /* When the EEE has been already initialised we have to
+ * modify the PLS bit in the LPI ctrl & status reg according
+ * to the PHY link status. For this reason.
+ */
+ if (priv->eee_enabled)
+ priv->hw->mac->set_eee_pls(priv->ioaddr, priv->phydev->link);
+}
+
/**
* stmmac_adjust_link
* @dev: net device structure
@@ -250,6 +337,7 @@ static void stmmac_adjust_link(struct net_device *dev)
phydev->addr, phydev->link);
spin_lock_irqsave(&priv->lock, flags);
+
if (phydev->link) {
u32 ctrl = readl(priv->ioaddr + MAC_CTRL_REG);
@@ -316,6 +404,8 @@ static void stmmac_adjust_link(struct net_device *dev)
if (new_state && netif_msg_link(priv))
phy_print_status(phydev);
+ stmmac_eee_adjust(priv);
+
spin_unlock_irqrestore(&priv->lock, flags);
DBG(probe, DEBUG, "stmmac_adjust_link: exiting\n");
@@ -333,7 +423,7 @@ static int stmmac_init_phy(struct net_device *dev)
{
struct stmmac_priv *priv = netdev_priv(dev);
struct phy_device *phydev;
- char phy_id[MII_BUS_ID_SIZE + 3];
+ char phy_id_fmt[MII_BUS_ID_SIZE + 3];
char bus_id[MII_BUS_ID_SIZE];
int interface = priv->plat->interface;
priv->oldlink = 0;
@@ -347,11 +437,12 @@ static int stmmac_init_phy(struct net_device *dev)
snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
priv->plat->bus_id);
- snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
+ snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id,
priv->plat->phy_addr);
- pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id);
+ pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id_fmt);
- phydev = phy_connect(dev, phy_id, &stmmac_adjust_link, 0, interface);
+ phydev = phy_connect(dev, phy_id_fmt, &stmmac_adjust_link, 0,
+ interface);
if (IS_ERR(phydev)) {
pr_err("%s: Could not attach to PHY\n", dev->name);
@@ -690,6 +781,11 @@ static void stmmac_tx(struct stmmac_priv *priv)
}
netif_tx_unlock(priv->dev);
}
+
+ if ((priv->eee_enabled) && (!priv->tx_path_in_lpi_mode)) {
+ stmmac_enable_eee_mode(priv);
+ mod_timer(&priv->eee_ctrl_timer, STMMAC_LPI_TIMER(eee_timer));
+ }
spin_unlock(&priv->tx_lock);
}
@@ -1028,6 +1124,17 @@ static int stmmac_open(struct net_device *dev)
}
}
+ /* Request the IRQ lines */
+ if (priv->lpi_irq != -ENXIO) {
+ ret = request_irq(priv->lpi_irq, stmmac_interrupt, IRQF_SHARED,
+ dev->name, dev);
+ if (unlikely(ret < 0)) {
+ pr_err("%s: ERROR: allocating the LPI IRQ %d (%d)\n",
+ __func__, priv->lpi_irq, ret);
+ goto open_error_lpiirq;
+ }
+ }
+
/* Enable the MAC Rx/Tx */
stmmac_set_mac(priv->ioaddr, true);
@@ -1063,12 +1170,19 @@ static int stmmac_open(struct net_device *dev)
if (priv->phydev)
phy_start(priv->phydev);
+ priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS_TIMER;
+ priv->eee_enabled = stmmac_eee_init(priv);
+
napi_enable(&priv->napi);
skb_queue_head_init(&priv->rx_recycle);
netif_start_queue(dev);
return 0;
+open_error_lpiirq:
+ if (priv->wol_irq != dev->irq)
+ free_irq(priv->wol_irq, dev);
+
open_error_wolirq:
free_irq(dev->irq, dev);
@@ -1094,6 +1208,9 @@ static int stmmac_release(struct net_device *dev)
{
struct stmmac_priv *priv = netdev_priv(dev);
+ if (priv->eee_enabled)
+ del_timer_sync(&priv->eee_ctrl_timer);
+
/* Stop and disconnect the PHY */
if (priv->phydev) {
phy_stop(priv->phydev);
@@ -1116,6 +1233,8 @@ static int stmmac_release(struct net_device *dev)
free_irq(dev->irq, dev);
if (priv->wol_irq != dev->irq)
free_irq(priv->wol_irq, dev);
+ if (priv->lpi_irq != -ENXIO)
+ free_irq(priv->lpi_irq, dev);
/* Stop TX/RX DMA and clear the descriptors */
priv->hw->dma->stop_tx(priv->ioaddr);
@@ -1165,6 +1284,9 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
spin_lock(&priv->tx_lock);
+ if (priv->tx_path_in_lpi_mode)
+ stmmac_disable_eee_mode(priv);
+
entry = priv->cur_tx % txsize;
#ifdef STMMAC_XMIT_DEBUG
@@ -1541,10 +1663,37 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
return IRQ_NONE;
}
- if (priv->plat->has_gmac)
- /* To handle GMAC own interrupts */
- priv->hw->mac->host_irq_status((void __iomem *) dev->base_addr);
+ /* To handle GMAC own interrupts */
+ if (priv->plat->has_gmac) {
+ int status = priv->hw->mac->host_irq_status((void __iomem *)
+ dev->base_addr);
+ if (unlikely(status)) {
+ if (status & core_mmc_tx_irq)
+ priv->xstats.mmc_tx_irq_n++;
+ if (status & core_mmc_rx_irq)
+ priv->xstats.mmc_rx_irq_n++;
+ if (status & core_mmc_rx_csum_offload_irq)
+ priv->xstats.mmc_rx_csum_offload_irq_n++;
+ if (status & core_irq_receive_pmt_irq)
+ priv->xstats.irq_receive_pmt_irq_n++;
+
+ /* For LPI we need to save the tx status */
+ if (status & core_irq_tx_path_in_lpi_mode) {
+ priv->xstats.irq_tx_path_in_lpi_mode_n++;
+ priv->tx_path_in_lpi_mode = true;
+ }
+ if (status & core_irq_tx_path_exit_lpi_mode) {
+ priv->xstats.irq_tx_path_exit_lpi_mode_n++;
+ priv->tx_path_in_lpi_mode = false;
+ }
+ if (status & core_irq_rx_path_in_lpi_mode)
+ priv->xstats.irq_rx_path_in_lpi_mode_n++;
+ if (status & core_irq_rx_path_exit_lpi_mode)
+ priv->xstats.irq_rx_path_exit_lpi_mode_n++;
+ }
+ }
+ /* To handle DMA interrupts */
stmmac_dma_interrupt(priv);
return IRQ_HANDLED;
@@ -2152,6 +2301,9 @@ static int __init stmmac_cmdline_opt(char *str)
} else if (!strncmp(opt, "pause:", 6)) {
if (kstrtoint(opt + 6, 0, &pause))
goto err;
+ } else if (!strncmp(opt, "eee_timer:", 6)) {
+ if (kstrtoint(opt + 10, 0, &eee_timer))
+ goto err;
#ifdef CONFIG_STMMAC_TIMER
} else if (!strncmp(opt, "tmrate:", 7)) {
if (kstrtoint(opt + 7, 0, &tmrate))
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 20eb502..7d36163 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -156,6 +156,8 @@ static int stmmac_pltfr_probe(struct platform_device *pdev)
if (priv->wol_irq == -ENXIO)
priv->wol_irq = priv->dev->irq;
+ priv->lpi_irq = platform_get_irq_byname(pdev, "eth_lpi");
+
platform_set_drvdata(pdev, priv->dev);
pr_debug("STMMAC platform driver registration completed");
--
1.7.4.4
^ permalink raw reply related
* Re: [PATCH 2/5] ipv4: Kill ip_rt_frag_needed().
From: Steffen Klassert @ 2012-06-13 8:01 UTC (permalink / raw)
To: David Miller; +Cc: netdev
In-Reply-To: <20120612.133333.527780673034196147.davem@davemloft.net>
On Tue, Jun 12, 2012 at 01:33:33PM -0700, David Miller wrote:
>
> We can't do exactly as my patch did, because it allows remote entities
> to easily poison PMTU information. All they have to know is that
> there is some UDP or RAW socket open with a certain ID and then send
> forged ICMP to us.
Yes, I know what you mean. But not updating the the cached pmtu
informations results in slow path fragmentation along the path.
Btw. what happens to ipv6 if we stop doing pmtu discovery?
Shouldn't we reduce the packet size to 1280 bytes then?
>
> What we possibly could do is adjust the socket's IP_PMTUDISC_* setting
> from IP_PMTUDISC_WANT to IP_PMTUDISC_DONT in response to PMTU
> messages.
>
I think an application that sets IP_PMTUDISC_WANT explicitly will
rely on the fact that the kernel does pmtu discovery. Changing
the socket setting to IP_PMTUDISC_DONT the first time we get into
trouble makes IP_PMTUDISC_WANT pointless for udp and raw sockets.
Another option would be to change the sockets default setting
from IP_PMTUDISC_WANT to IP_PMTUDISC_DONT (at least for udp and
raw) and do pmtu discovery if an application sets IP_PMTUDISC_WANT.
With this we don't have the pmtu cache poisoning issue as the default.
We would only have it if a sockets sets IP_PMTUDISC_WANT explicitly.
This is not perfect too, but I fear there is no perfect solution here.
^ permalink raw reply
* Re: [PATCH 4/7] usbnet: remove EVENT_DEV_OPEN flag
From: Bjørn Mork @ 2012-06-13 8:28 UTC (permalink / raw)
To: Oliver Neukum
Cc: Ming Lei, David S. Miller, Greg Kroah-Hartman,
netdev-u79uwXL29TY76Z2rM5mHXA, linux-usb-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <201206130940.54817.oliver-GvhC2dPhHPQdnm+yROfE0A@public.gmane.org>
Oliver Neukum <oliver-GvhC2dPhHPQdnm+yROfE0A@public.gmane.org> writes:
> Am Mittwoch, 13. Juni 2012, 06:47:18 schrieb Ming Lei:
>> On Wed, Jun 13, 2012 at 10:12 AM, Ming Lei <tom.leiming-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>> > On Wed, Jun 13, 2012 at 2:14 AM, Oliver Neukum <oliver-GvhC2dPhHPQdnm+yROfE0A@public.gmane.org> wrote:
>> >> Am Dienstag, 12. Juni 2012, 03:19:42 schrieb Ming Lei:
>> >>> EVENT_DEV_OPEN is introduced to mark if the interface is opened or
>> >>> not, but we already have IFF_UP to handle it, so just
>> >>> remove the flag and use IFF_UP.
>> >>
>> >> When is IFF_UP cleared? The flag is tested in usbnet_resume(),
>> >
>> > The flag is cleared just after usbnet_stop completes.
>>
>> Looks we can use the below to replace EVENT_DEV_OPEN:
>>
>> (netif_running((dev)->net) && ((dev)->net->flags & IFF_UP))
>
> That goes down a bit into the interna of the network code.
> If we do this, please encapsulated and with a big fat comment.
There are already plenty of places in usbnet.c where
netif_running(dev->net) is tested instead of EVENT_DEV_OPEN.
Why should the test in usbnet_resume be any different?
The only reason I see is that some devices might want to keep interrupts
running without the netdev being up, but the current code doesn't
support that anyway. So better implement it when there is a device and
driver needing it.
BTW, does the "&& (dev->net->flags & IFF_UP)" really make any
difference, or could the test be simplified to
(netif_running(dev->net))
Bjørn
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* [PATCH v2 net-next v3 3/3] 6lowpan: remove excessive argument in pr_debug
From: Alexander Smirnov @ 2012-06-13 8:38 UTC (permalink / raw)
To: davem; +Cc: joe, netdev, Alexander Smirnov
In-Reply-To: <1339254789-10712-1-git-send-email-alex.bluesman.smirnov@gmail.com>
Remove excessive __func__ argument in pr_debug function and some
excessive debug messages.
Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
---
net/ieee802154/6lowpan.c | 94 ++++++++++++++++++----------------------------
1 files changed, 37 insertions(+), 57 deletions(-)
diff --git a/net/ieee802154/6lowpan.c b/net/ieee802154/6lowpan.c
index b45e229..ad0c226 100644
--- a/net/ieee802154/6lowpan.c
+++ b/net/ieee802154/6lowpan.c
@@ -240,8 +240,7 @@ lowpan_uncompress_addr(struct sk_buff *skb, struct in6_addr *ipaddr,
lowpan_uip_ds6_set_addr_iid(ipaddr, lladdr);
}
- pr_debug("(%s): uncompressing %d + %d => ", __func__, prefcount,
- postcount);
+ pr_debug("uncompressing %d + %d => ", prefcount, postcount);
lowpan_raw_dump_inline(NULL, NULL, ipaddr->s6_addr, 16);
return 0;
@@ -252,13 +251,11 @@ lowpan_compress_udp_header(u8 **hc06_ptr, struct sk_buff *skb)
{
struct udphdr *uh = udp_hdr(skb);
- pr_debug("(%s): UDP header compression\n", __func__);
-
if (((uh->source & LOWPAN_NHC_UDP_4BIT_MASK) ==
LOWPAN_NHC_UDP_4BIT_PORT) &&
((uh->dest & LOWPAN_NHC_UDP_4BIT_MASK) ==
LOWPAN_NHC_UDP_4BIT_PORT)) {
- pr_debug("(%s): both ports compression to 4 bits\n", __func__);
+ pr_debug("UDP header: both ports compression to 4 bits\n");
**hc06_ptr = LOWPAN_NHC_UDP_CS_P_11;
**(hc06_ptr + 1) = /* subtraction is faster */
(u8)((uh->dest - LOWPAN_NHC_UDP_4BIT_PORT) +
@@ -266,20 +263,20 @@ lowpan_compress_udp_header(u8 **hc06_ptr, struct sk_buff *skb)
*hc06_ptr += 2;
} else if ((uh->dest & LOWPAN_NHC_UDP_8BIT_MASK) ==
LOWPAN_NHC_UDP_8BIT_PORT) {
- pr_debug("(%s): remove 8 bits of dest\n", __func__);
+ pr_debug("UDP header: remove 8 bits of dest\n");
**hc06_ptr = LOWPAN_NHC_UDP_CS_P_01;
memcpy(*hc06_ptr + 1, &uh->source, 2);
**(hc06_ptr + 3) = (u8)(uh->dest - LOWPAN_NHC_UDP_8BIT_PORT);
*hc06_ptr += 4;
} else if ((uh->source & LOWPAN_NHC_UDP_8BIT_MASK) ==
LOWPAN_NHC_UDP_8BIT_PORT) {
- pr_debug("(%s): remove 8 bits of source\n", __func__);
+ pr_debug("UDP header: remove 8 bits of source\n");
**hc06_ptr = LOWPAN_NHC_UDP_CS_P_10;
memcpy(*hc06_ptr + 1, &uh->dest, 2);
**(hc06_ptr + 3) = (u8)(uh->source - LOWPAN_NHC_UDP_8BIT_PORT);
*hc06_ptr += 4;
} else {
- pr_debug("(%s): can't compress header\n", __func__);
+ pr_debug("UDP header: can't compress\n");
**hc06_ptr = LOWPAN_NHC_UDP_CS_P_00;
memcpy(*hc06_ptr + 1, &uh->source, 2);
memcpy(*hc06_ptr + 3, &uh->dest, 2);
@@ -323,7 +320,7 @@ lowpan_uncompress_udp_header(struct sk_buff *skb)
goto err;
if ((tmp & LOWPAN_NHC_UDP_MASK) == LOWPAN_NHC_UDP_ID) {
- pr_debug("(%s): UDP header uncompression\n", __func__);
+ pr_debug("UDP header uncompression\n");
switch (tmp & LOWPAN_NHC_UDP_CS_P_11) {
case LOWPAN_NHC_UDP_CS_P_00:
memcpy(&uh->source, &skb->data[0], 2);
@@ -349,19 +346,19 @@ lowpan_uncompress_udp_header(struct sk_buff *skb)
skb_pull(skb, 1);
break;
default:
- pr_debug("(%s) ERROR: unknown UDP format\n", __func__);
+ pr_debug("ERROR: unknown UDP format\n");
goto err;
break;
}
- pr_debug("(%s): uncompressed UDP ports: src = %d, dst = %d\n",
- __func__, uh->source, uh->dest);
+ pr_debug("uncompressed UDP ports: src = %d, dst = %d\n",
+ uh->source, uh->dest);
/* copy checksum */
memcpy(&uh->check, &skb->data[0], 2);
skb_pull(skb, 2);
} else {
- pr_debug("(%s): ERROR: unsupported NH format\n", __func__);
+ pr_debug("ERROR: unsupported NH format\n");
goto err;
}
@@ -394,10 +391,9 @@ static int lowpan_header_create(struct sk_buff *skb,
hdr = ipv6_hdr(skb);
hc06_ptr = head + 2;
- pr_debug("(%s): IPv6 header dump:\n\tversion = %d\n\tlength = %d\n"
- "\tnexthdr = 0x%02x\n\thop_lim = %d\n", __func__,
- hdr->version, ntohs(hdr->payload_len), hdr->nexthdr,
- hdr->hop_limit);
+ pr_debug("IPv6 header dump:\n\tversion = %d\n\tlength = %d\n"
+ "\tnexthdr = 0x%02x\n\thop_lim = %d\n", hdr->version,
+ ntohs(hdr->payload_len), hdr->nexthdr, hdr->hop_limit);
lowpan_raw_dump_table(__func__, "raw skb network header dump",
skb_network_header(skb), sizeof(struct ipv6hdr));
@@ -498,23 +494,22 @@ static int lowpan_header_create(struct sk_buff *skb,
/* source address compression */
if (is_addr_unspecified(&hdr->saddr)) {
- pr_debug("(%s): source address is unspecified, setting SAC\n",
- __func__);
+ pr_debug("source address is unspecified, setting SAC\n");
iphc1 |= LOWPAN_IPHC_SAC;
/* TODO: context lookup */
} else if (is_addr_link_local(&hdr->saddr)) {
- pr_debug("(%s): source address is link-local\n", __func__);
+ pr_debug("source address is link-local\n");
iphc1 |= lowpan_compress_addr_64(&hc06_ptr,
LOWPAN_IPHC_SAM_BIT, &hdr->saddr, saddr);
} else {
- pr_debug("(%s): send the full source address\n", __func__);
+ pr_debug("send the full source address\n");
memcpy(hc06_ptr, &hdr->saddr.s6_addr16[0], 16);
hc06_ptr += 16;
}
/* destination address compression */
if (is_addr_mcast(&hdr->daddr)) {
- pr_debug("(%s): destination address is multicast", __func__);
+ pr_debug("destination address is multicast: ");
iphc1 |= LOWPAN_IPHC_M;
if (lowpan_is_mcast_addr_compressable8(&hdr->daddr)) {
pr_debug("compressed to 1 octet\n");
@@ -543,14 +538,13 @@ static int lowpan_header_create(struct sk_buff *skb,
hc06_ptr += 16;
}
} else {
- pr_debug("(%s): destination address is unicast: ", __func__);
/* TODO: context lookup */
if (is_addr_link_local(&hdr->daddr)) {
- pr_debug("destination address is link-local\n");
+ pr_debug("dest address is unicast and link-local\n");
iphc1 |= lowpan_compress_addr_64(&hc06_ptr,
LOWPAN_IPHC_DAM_BIT, &hdr->daddr, daddr);
} else {
- pr_debug("using full address\n");
+ pr_debug("dest address is unicast: using full one\n");
memcpy(hc06_ptr, &hdr->daddr.s6_addr16[0], 16);
hc06_ptr += 16;
}
@@ -642,8 +636,7 @@ static void lowpan_fragment_timer_expired(unsigned long entry_addr)
{
struct lowpan_fragment *entry = (struct lowpan_fragment *)entry_addr;
- pr_debug("%s: timer expired for frame with tag %d\n", __func__,
- entry->tag);
+ pr_debug("timer expired for frame with tag %d\n", entry->tag);
spin_lock(&flist_lock);
list_del(&entry->list);
@@ -796,12 +789,11 @@ lowpan_process_data(struct sk_buff *skb)
_saddr = mac_cb(skb)->sa.hwaddr;
_daddr = mac_cb(skb)->da.hwaddr;
- pr_debug("(%s): iphc0 = %02x, iphc1 = %02x\n", __func__, iphc0, iphc1);
+ pr_debug("iphc0 = %02x, iphc1 = %02x\n", iphc0, iphc1);
/* another if the CID flag is set */
if (iphc1 & LOWPAN_IPHC_CID) {
- pr_debug("(%s): CID flag is set, increase header with one\n",
- __func__);
+ pr_debug("CID flag is set, increase header with one\n");
if (lowpan_fetch_skb_u8(skb, &num_context))
goto drop;
}
@@ -866,8 +858,8 @@ lowpan_process_data(struct sk_buff *skb)
if (lowpan_fetch_skb_u8(skb, &(hdr.nexthdr)))
goto drop;
- pr_debug("(%s): NH flag is set, next header is carried "
- "inline: %02x\n", __func__, hdr.nexthdr);
+ pr_debug("NH flag is set, next header carried inline: %02x\n",
+ hdr.nexthdr);
}
/* Hop Limit */
@@ -882,7 +874,7 @@ lowpan_process_data(struct sk_buff *skb)
tmp = ((iphc1 & LOWPAN_IPHC_SAM) >> LOWPAN_IPHC_SAM_BIT) & 0x03;
/* Source address uncompression */
- pr_debug("(%s): source address stateless compression\n", __func__);
+ pr_debug("source address stateless compression\n");
err = lowpan_uncompress_addr(skb, &hdr.saddr, lowpan_llprefix,
lowpan_unc_llconf[tmp], skb->data);
if (err)
@@ -894,14 +886,12 @@ lowpan_process_data(struct sk_buff *skb)
/* check for Multicast Compression */
if (iphc1 & LOWPAN_IPHC_M) {
if (iphc1 & LOWPAN_IPHC_DAC) {
- pr_debug("(%s): destination address context-based "
- "multicast compression\n", __func__);
+ pr_debug("dest: context-based mcast compression\n");
/* TODO: implement this */
} else {
u8 prefix[] = {0xff, 0x02};
- pr_debug("(%s): destination address non-context-based"
- " multicast compression\n", __func__);
+ pr_debug("dest: non context-based mcast compression\n");
if (0 < tmp && tmp < 3) {
if (lowpan_fetch_skb_u8(skb, &prefix[1]))
goto drop;
@@ -913,8 +903,7 @@ lowpan_process_data(struct sk_buff *skb)
goto drop;
}
} else {
- pr_debug("(%s): destination address stateless compression\n",
- __func__);
+ pr_debug("dest: stateless compression\n");
err = lowpan_uncompress_addr(skb, &hdr.daddr, lowpan_llprefix,
lowpan_unc_llconf[tmp], skb->data);
if (err)
@@ -929,11 +918,11 @@ lowpan_process_data(struct sk_buff *skb)
/* Not fragmented package */
hdr.payload_len = htons(skb->len);
- pr_debug("(%s): skb headroom size = %d, data length = %d\n", __func__,
- skb_headroom(skb), skb->len);
+ pr_debug("skb headroom size = %d, data length = %d\n",
+ skb_headroom(skb), skb->len);
- pr_debug("(%s): IPv6 header dump:\n\tversion = %d\n\tlength = %d\n\t"
- "nexthdr = 0x%02x\n\thop_lim = %d\n", __func__, hdr.version,
+ pr_debug("IPv6 header dump:\n\tversion = %d\n\tlength = %d\n\t"
+ "nexthdr = 0x%02x\n\thop_lim = %d\n", hdr.version,
ntohs(hdr.payload_len), hdr.nexthdr, hdr.hop_limit);
lowpan_raw_dump_table(__func__, "raw header dump", (u8 *)&hdr,
@@ -1035,11 +1024,11 @@ static netdev_tx_t lowpan_xmit(struct sk_buff *skb, struct net_device *dev)
{
int err = -1;
- pr_debug("(%s): package xmit\n", __func__);
+ pr_debug("package xmit\n");
skb->dev = lowpan_dev_info(dev)->real_dev;
if (skb->dev == NULL) {
- pr_debug("(%s) ERROR: no real wpan device found\n", __func__);
+ pr_debug("ERROR: no real wpan device found\n");
goto error;
}
@@ -1048,14 +1037,13 @@ static netdev_tx_t lowpan_xmit(struct sk_buff *skb, struct net_device *dev)
goto out;
}
- pr_debug("(%s): frame is too big, fragmentation is needed\n",
- __func__);
+ pr_debug("frame is too big, fragmentation is needed\n");
err = lowpan_skb_fragmentation(skb);
error:
dev_kfree_skb(skb);
out:
if (err < 0)
- pr_debug("(%s): ERROR: xmit failed\n", __func__);
+ pr_debug("ERROR: xmit failed\n");
return (err < 0 ? NETDEV_TX_BUSY : NETDEV_TX_OK);
}
@@ -1101,8 +1089,6 @@ static struct ieee802154_mlme_ops lowpan_mlme = {
static void lowpan_setup(struct net_device *dev)
{
- pr_debug("(%s)\n", __func__);
-
dev->addr_len = IEEE802154_ADDR_LEN;
memset(dev->broadcast, 0xff, IEEE802154_ADDR_LEN);
dev->type = ARPHRD_IEEE802154;
@@ -1122,8 +1108,6 @@ static void lowpan_setup(struct net_device *dev)
static int lowpan_validate(struct nlattr *tb[], struct nlattr *data[])
{
- pr_debug("(%s)\n", __func__);
-
if (tb[IFLA_ADDRESS]) {
if (nla_len(tb[IFLA_ADDRESS]) != IEEE802154_ADDR_LEN)
return -EINVAL;
@@ -1164,7 +1148,7 @@ static int lowpan_newlink(struct net *src_net, struct net_device *dev,
struct net_device *real_dev;
struct lowpan_dev_record *entry;
- pr_debug("(%s)\n", __func__);
+ pr_debug("adding new link\n");
if (!tb[IFLA_LINK])
return -EINVAL;
@@ -1259,8 +1243,6 @@ static int __init lowpan_init_module(void)
{
int err = 0;
- pr_debug("(%s)\n", __func__);
-
err = lowpan_netlink_init();
if (err < 0)
goto out;
@@ -1272,8 +1254,6 @@ out:
static void __exit lowpan_cleanup_module(void)
{
- pr_debug("(%s)\n", __func__);
-
lowpan_netlink_fini();
dev_remove_pack(&lowpan_packet_type);
--
1.7.2.3
^ permalink raw reply related
* Re: net/netfilter/nf_conntrack_proto_tcp.c:1606:9: error: ‘struct nf_proto_net’ has no member named ‘user’
From: Gao feng @ 2012-06-13 8:51 UTC (permalink / raw)
To: Pablo Neira Ayuso; +Cc: David Miller, wfg, netdev
In-Reply-To: <20120612160304.GA31427@1984>
于 2012年06月13日 00:03, Pablo Neira Ayuso 写道:
> Still, we have that pn->users thing:
>
> if (!pn->users++) {
> for (i = 0; i < TCP_CONNTRACK_TIMEOUT_MAX; i++)
> tn->timeouts[i] = tcp_timeouts[i];
>
> tn->tcp_loose = nf_ct_tcp_loose;
> tn->tcp_be_liberal = nf_ct_tcp_be_liberal;
> tn->tcp_max_retrans = nf_ct_tcp_max_retrans;
> }
>
> Define some pn->initialized boolean. Set it to true at the end of
> the new tcp_init_net.
It should not be boolean,because We don't know what's the right time to set it false.
Just like nf_conntrack_l4proto_tcp(4,6), they both use nf_tcp_net,we can set it false
only when tcp4 and tcp6 are unregistered, so we need a referenct count here to point
out if one proto has initialied the nf_tcp_net, or if there are no protos use nf_tcp_net.
Though it maybe confusing,we can regard it as the reference count of nf_proto_net(how
many protos are using nf_proto_net), and this reference count is increased when
l4proto being registered success(no matter sysctl is enabled or disabled).
^ permalink raw reply
* Re: [PATCH 4/7] usbnet: remove EVENT_DEV_OPEN flag
From: Ming Lei @ 2012-06-13 9:21 UTC (permalink / raw)
To: Bjørn Mork
Cc: Oliver Neukum, David S. Miller, Greg Kroah-Hartman,
netdev-u79uwXL29TY76Z2rM5mHXA, linux-usb-u79uwXL29TY76Z2rM5mHXA
In-Reply-To: <87r4tjlio1.fsf-lbf33ChDnrE/G1V5fR+Y7Q@public.gmane.org>
On Wed, Jun 13, 2012 at 4:28 PM, Bjørn Mork <bjorn-yOkvZcmFvRU@public.gmane.org> wrote:
>
> BTW, does the "&& (dev->net->flags & IFF_UP)" really make any
> difference, or could the test be simplified to
>
> (netif_running(dev->net))
Neither netif_running(dev->net) nor (dev->net->flags & IFF_UP)
is enough.
In the start of usbnet_open(), the usb device may be waken up and
usbnet_resume will see netif_running(dev->net) in the situation, so
may cause problem since the interface hasn't been UP yet.
If just checking on (dev->net->flags & IFF_UP), it still may cause
problem in usbnet_resume as pointed by Oliver.
So looks only checking on both netif_running(dev->net) and
(dev->net->flags & IFF_UP) is OK.
Thanks,
--
Ming Lei
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply
* Re: [PATCH 1/3] net: lpc_eth: Replace WARN() trace with simple pr_warn()
From: Roland Stigge @ 2012-06-13 9:28 UTC (permalink / raw)
To: Eric Dumazet
Cc: David Miller, netdev, linux-kernel, kevin.wells, srinivas.bakki,
aletes.xgr, linux-arm-kernel
In-Reply-To: <1339568172.22704.312.camel@edumazet-glaptop>
On 06/13/2012 08:16 AM, Eric Dumazet wrote:
> On Mon, 2012-06-11 at 21:18 +0200, Eric Dumazet wrote:
>> On Mon, 2012-06-11 at 11:26 +0200, Roland Stigge wrote:
>>
>>> Is it sensible at this point to increase the TX buffers anyway? For
>>> different reasons of course: We have enough SRAM available and TX
>>> buffers (16->32) are still more than RX buffers (48).
>>
>> I doubt it has any impact on performance for a 100Mbit link ?
>>
>> One thing that could be done would be to free skbs in
>> lpc_eth_hard_start_xmit() instead of __lpc_handle_xmit()
>>
>
> Here is the patch I was thinking about
>
> (on top of latest net-next)
>
> Could you please test it ?
>
> drivers/net/ethernet/nxp/lpc_eth.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c
> index 083d671..426f14c 100644
> --- a/drivers/net/ethernet/nxp/lpc_eth.c
> +++ b/drivers/net/ethernet/nxp/lpc_eth.c
> @@ -440,7 +440,7 @@ struct netdata_local {
> spinlock_t lock;
> void __iomem *net_base;
> u32 msg_enable;
> - struct sk_buff *skb[ENET_TX_DESC];
> + unsigned int skblen[ENET_TX_DESC];
> unsigned int last_tx_idx;
> unsigned int num_used_tx_buffs;
> struct mii_bus *mii_bus;
> @@ -908,7 +908,7 @@ static void __lpc_handle_xmit(struct net_device *ndev)
>
> txcidx = readl(LPC_ENET_TXCONSUMEINDEX(pldat->net_base));
> while (pldat->last_tx_idx != txcidx) {
> - skb = pldat->skb[pldat->last_tx_idx];
> + unsigned int skblen = pldat->skblen[pldat->last_tx_idx];
>
> /* A buffer is available, get buffer status */
> ptxstat = &pldat->tx_stat_v[pldat->last_tx_idx];
> @@ -945,9 +945,8 @@ static void __lpc_handle_xmit(struct net_device *ndev)
> } else {
> /* Update stats */
> ndev->stats.tx_packets++;
> - ndev->stats.tx_bytes += skb->len;
> + ndev->stats.tx_bytes += skblen;
> }
> - dev_kfree_skb_irq(skb);
>
> txcidx = readl(LPC_ENET_TXCONSUMEINDEX(pldat->net_base));
> }
> @@ -1132,7 +1131,7 @@ static int lpc_eth_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
> memcpy(pldat->tx_buff_v + txidx * ENET_MAXF_SIZE, skb->data, len);
>
> /* Save the buffer and increment the buffer counter */
> - pldat->skb[txidx] = skb;
> + pldat->skblen[txidx] = len;
> pldat->num_used_tx_buffs++;
>
> /* Start transmit */
> @@ -1147,6 +1146,7 @@ static int lpc_eth_hard_start_xmit(struct sk_buff *skb, struct net_device *ndev)
>
> spin_unlock_irq(&pldat->lock);
>
> + dev_kfree_skb(skb);
> return NETDEV_TX_OK;
> }
Works fine for a while now.
We can remove the unused variable skb from __lpc_handle_xmit() now,
maybe just do in your patch?
Thanks!
Tested-by: Roland Stigge <stigge@antcom.de>
^ permalink raw reply
* Re: [PATCH 2/5] ipv4: Kill ip_rt_frag_needed().
From: David Miller @ 2012-06-13 9:42 UTC (permalink / raw)
To: steffen.klassert; +Cc: netdev
In-Reply-To: <20120613080152.GN27795@secunet.com>
From: Steffen Klassert <steffen.klassert@secunet.com>
Date: Wed, 13 Jun 2012 10:01:52 +0200
> I think an application that sets IP_PMTUDISC_WANT explicitly will
> rely on the fact that the kernel does pmtu discovery. Changing
> the socket setting to IP_PMTUDISC_DONT the first time we get into
> trouble makes IP_PMTUDISC_WANT pointless for udp and raw sockets.
How so?
We are mimicking exactly what would happen if we had just created
a new routing cache entry when the application openned the socket.
There is no behavioral difference whatsoever.
We absolutely do perform PMTU discovery, the first large packet
will trigger it. And then, as if we had lowered the PMTU in
the routing cache entry, we will stop setting DF in the packets.
Because that is how the IP_PMTUDISC_* checks work in the IP output
path in the place that decides whether to set DF or not.
> Another option would be to change the sockets default setting
> from IP_PMTUDISC_WANT to IP_PMTUDISC_DONT (at least for udp and
> raw) and do pmtu discovery if an application sets IP_PMTUDISC_WANT.
Changing defaults doesn't make the problem go away, and is also
unexpected.
I did all of my testing using the "-M" option of ping.
^ permalink raw reply
* [net-next patch 0/12] bnx2x: ethtool and other enhancements
From: Merav Sicron @ 2012-06-13 12:44 UTC (permalink / raw)
To: eilong, davem, netdev; +Cc: Merav Sicron
Hi Dave,
This patch series adds few features to bnx2x:
Add support for external LB in ethtool self-test
Enable UDP RSS on 4-tupple, controlled by ethtool
Support up to 63 RSS queues (rather than 16)
Add support for setting the desired number of RSS queues via ethtool
Allow to configure dcbx admin params from all drivers on a single physical port
Add FCoE capabilities advertisement
Please consider applying this patch series to net-next.
Thanks,
Merav
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox