* Re: [v2 PATCH] net: Update alloc frag to reduce get/put page usage and recycle pages
From: David Miller @ 2012-07-13 9:59 UTC (permalink / raw)
To: eric.dumazet
Cc: alexander.h.duyck, netdev, jeffrey.t.kirsher, edumazet,
alexander.duyck
In-Reply-To: <1342170394.3265.8339.camel@edumazet-glaptop>
From: Eric Dumazet <eric.dumazet@gmail.com>
Date: Fri, 13 Jul 2012 11:06:34 +0200
> On Thu, 2012-07-12 at 17:23 -0700, Alexander Duyck wrote:
>> This patch is meant to help improve performance by reducing the number of
>> locked operations required to allocate a frag on x86 and other platforms.
>> This is accomplished by using atomic_set operations on the page count
>> instead of calling get_page and put_page. It is based on work originally
>> provided by Eric Dumazet.
>>
>> In addition it also helps to reduce memory overhead when using TCP. This
>> is done by recycling the page if the only holder of the frame is the
>> netdev_alloc_frag call itself. This can occur when skb heads are stolen by
>> either GRO or TCP and the driver providing the packets is using paged frags
>> to store all of the data for the packets.
>>
>> Cc: Eric Dumazet <edumazet@google.com>
>> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
...
> Signed-off-by: Eric Dumazet <edumazet@google.com>
Applied.
^ permalink raw reply
* Re: [v2 PATCH] net: Update alloc frag to reduce get/put page usage and recycle pages
From: Eric Dumazet @ 2012-07-13 9:06 UTC (permalink / raw)
To: Alexander Duyck
Cc: netdev, davem, jeffrey.t.kirsher, edumazet, alexander.duyck
In-Reply-To: <20120713001922.27393.1358.stgit@gitlad.jf.intel.com>
On Thu, 2012-07-12 at 17:23 -0700, Alexander Duyck wrote:
> This patch is meant to help improve performance by reducing the number of
> locked operations required to allocate a frag on x86 and other platforms.
> This is accomplished by using atomic_set operations on the page count
> instead of calling get_page and put_page. It is based on work originally
> provided by Eric Dumazet.
>
> In addition it also helps to reduce memory overhead when using TCP. This
> is done by recycling the page if the only holder of the frame is the
> netdev_alloc_frag call itself. This can occur when skb heads are stolen by
> either GRO or TCP and the driver providing the packets is using paged frags
> to store all of the data for the packets.
>
> Cc: Eric Dumazet <edumazet@google.com>
> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
> ---
>
> v2: Reverted back to something closer to the patch that Eric originally
> submitted. The main goal in all this is to get the removal of expensive
> atomic ops and recycling added for now while Eric is still working on
> an approach that uses larger pages.
>
> net/core/skbuff.c | 28 ++++++++++++++++++++--------
> 1 files changed, 20 insertions(+), 8 deletions(-)
Signed-off-by: Eric Dumazet <edumazet@google.com>
^ permalink raw reply
* [PATCH ISDN] Add check for usb_alloc_urb() result
From: Karsten Keil @ 2012-07-13 8:59 UTC (permalink / raw)
To: David Miller; +Cc: netdev, rucsoftsec, m.bachem
usb_alloc_urb() return value needs to be checked to avoid
later NULL pointer access.
Reported by rucsoftsec@gmail.com via bugzilla.kernel.org #44601.
Signed-off-by: Karsten Keil <kkeil@linux-pingi.de>
---
drivers/isdn/hardware/mISDN/hfcsusb.c | 18 +++++++++++++-----
drivers/isdn/hisax/hfc_usb.c | 18 +++++++++++++-----
2 files changed, 26 insertions(+), 10 deletions(-)
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index c65c344..114f3bc 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -2084,13 +2084,21 @@ hfcsusb_probe(struct usb_interface *intf, const struct usb_device_id *id)
/* create the control pipes needed for register access */
hw->ctrl_in_pipe = usb_rcvctrlpipe(hw->dev, 0);
hw->ctrl_out_pipe = usb_sndctrlpipe(hw->dev, 0);
+
+ driver_info = (struct hfcsusb_vdata *)
+ hfcsusb_idtab[vend_idx].driver_info;
+
hw->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!hw->ctrl_urb) {
+ pr_warn("%s: No memory for control urb\n",
+ driver_info->vend_name);
+ kfree(hw);
+ return -ENOMEM;
+ }
- driver_info =
- (struct hfcsusb_vdata *)hfcsusb_idtab[vend_idx].driver_info;
- printk(KERN_DEBUG "%s: %s: detected \"%s\" (%s, if=%d alt=%d)\n",
- hw->name, __func__, driver_info->vend_name,
- conf_str[small_match], ifnum, alt_used);
+ pr_info("%s: %s: detected \"%s\" (%s, if=%d alt=%d)\n",
+ hw->name, __func__, driver_info->vend_name,
+ conf_str[small_match], ifnum, alt_used);
if (setup_instance(hw, dev->dev.parent))
return -EIO;
diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c
index 84f9c81..849a807 100644
--- a/drivers/isdn/hisax/hfc_usb.c
+++ b/drivers/isdn/hisax/hfc_usb.c
@@ -1483,13 +1483,21 @@ hfc_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
usb_rcvctrlpipe(context->dev, 0);
context->ctrl_out_pipe =
usb_sndctrlpipe(context->dev, 0);
+
+ driver_info = (hfcsusb_vdata *)
+ hfcusb_idtab[vend_idx].driver_info;
+
context->ctrl_urb = usb_alloc_urb(0, GFP_KERNEL);
- driver_info =
- (hfcsusb_vdata *) hfcusb_idtab[vend_idx].
- driver_info;
- printk(KERN_INFO "HFC-S USB: detected \"%s\"\n",
- driver_info->vend_name);
+ if (!context->ctrl_urb) {
+ pr_warn("%s: No memory for control urb\n",
+ driver_info->vend_name);
+ kfree(context);
+ return -ENOMEM;
+ }
+
+ pr_info("HFC-S USB: detected \"%s\"\n",
+ driver_info->vend_name);
DBG(HFCUSB_DBG_INIT,
"HFC-S USB: Endpoint-Config: %s (if=%d alt=%d), E-Channel(%d)",
--
1.7.7
^ permalink raw reply related
* [PATCH net-next] tcp: add LAST_ACK as a valid state for TSQ
From: Eric Dumazet @ 2012-07-13 8:46 UTC (permalink / raw)
To: David Miller; +Cc: netdev, Yuchung Cheng, Matt Mathis, Mahesh Bandewar
From: Eric Dumazet <edumazet@google.com>
Socket state LAST_ACK should allow TSQ to send additional frames,
or else we rely on incoming ACKS or timers to send them.
Reported-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Matt Mathis <mattmathis@google.com>
Cc: Mahesh Bandewar <maheshb@google.com>
---
net/ipv4/tcp_output.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 03854ab..15a7c7b 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -838,7 +838,7 @@ static void tcp_tasklet_func(unsigned long data)
if (!sock_owned_by_user(sk)) {
if ((1 << sk->sk_state) &
(TCPF_ESTABLISHED | TCPF_FIN_WAIT1 |
- TCPF_CLOSING | TCPF_CLOSE_WAIT))
+ TCPF_CLOSING | TCPF_CLOSE_WAIT | TCPF_LAST_ACK))
tcp_write_xmit(sk,
tcp_current_mss(sk),
0, 0,
@@ -868,7 +868,7 @@ void tcp_release_cb(struct sock *sk)
if (test_and_clear_bit(TSQ_OWNED, &tp->tsq_flags)) {
if ((1 << sk->sk_state) &
(TCPF_ESTABLISHED | TCPF_FIN_WAIT1 |
- TCPF_CLOSING | TCPF_CLOSE_WAIT))
+ TCPF_CLOSING | TCPF_CLOSE_WAIT | TCPF_LAST_ACK))
tcp_write_xmit(sk,
tcp_current_mss(sk),
0, 0,
^ permalink raw reply related
* Re: [PATCH net-next] net: ftgmac100/ftmac100: dont pull too much data
From: Andrew Yan-Pai Chen @ 2012-07-13 8:31 UTC (permalink / raw)
To: Po-Yu Chuang
Cc: David Miller, eric.dumazet, netdev,
Andrew Yan-Pai Chen(陳彥百), kernel.jason
In-Reply-To: <CANutaR8xeMJpNpFoErw_sT9KfMUsX0wk7A31PGOgO=b7cUow3A@mail.gmail.com>
On Fri, Jul 13, 2012 at 10:21 AM, Po-Yu Chuang <ratbert.chuang@gmail.com> wrote:
> On Thu, Jul 12, 2012 at 10:38 PM, David Miller <davem@davemloft.net> wrote:
>> From: Po-Yu Chuang <ratbert.chuang@gmail.com>
>> Date: Thu, 12 Jul 2012 22:35:18 +0800
>>
>>> Thank you Eric. :-)
>>
>> You can thank him by providing an "Acked-by: ..." tag in your
>> reply.
>
> I don't have hardware to test this patch now.
> CC the current maintainer.
>
> regards,
> Po-Yu Chuang
Acked-by: Yan-Pai Chen <yanpai.chen@gmail.com>
--
Regards,
Andrew
^ permalink raw reply
* Re: [RFC PATCH 1/2] net: Add new network device function to allow for MMIO batching
From: Eric Dumazet @ 2012-07-13 7:38 UTC (permalink / raw)
To: Alexander Duyck
Cc: netdev, davem, jeffrey.t.kirsher, edumazet, bhutchings, therbert,
alexander.duyck
In-Reply-To: <4FFEEF99.7030707@intel.com>
On Thu, 2012-07-12 at 08:39 -0700, Alexander Duyck wrote:
> The problem is in both of the cases where I have seen the issue the
> qdisc is actually empty.
>
You mean a router workload, with links of same bandwidth.
(BQL doesnt trigger)
Frankly what percentage of linux powered machines act as high perf
routers ?
> In the case of pktgen it does not use the qdisc layer at all. It just
> directly calls ndo_start_xmit.
pktgen is in kernel, adding a complete() call in it is certainly ok,
if we can avoid kernel bloat.
I mean, pktgen represents less than 0.000001 % of real workloads.
>
> In the standard networking case we never fill the qdisc because the MMIO
> write stalls the entire CPU so the application never gets a chance to
> get ahead of the hardware. From what I can tell the only case in which
> the qdisc_run solution would work is if the ndo_start_xmit was called on
> a different CPU from the application that is doing the transmitting.
Hey, I can tell that qdisc is not empty on many workloads.
But BQL and TSO mean we only send one or two packets per qdisc run.
I understand this MMIO batching helps routers workloads, or workloads
using many small packets.
But on other workloads, this adds a significant latency source
(NET_TX_SOFTIRQ)
It would be good to instrument the extra delay on a single UDP send.
(entering do_softirq() path is not a few instructions...)
^ permalink raw reply
* Re: resurrecting tcphealth
From: Piotr Sawuk @ 2012-07-13 7:33 UTC (permalink / raw)
To: netdev; +Cc: linux-kernel
On Do, 12.07.2012, 23:35, Stephen Hemminger wrote:
> On Thu, 12 Jul 2012 22:55:57 +0200
> "Piotr Sawuk" <a9702387@unet.univie.ac.at> wrote:
>
>> + * Federico D. Sacerdoti: Added TCP health monitoring.
>
> Please don't do this.
> The kernel community no longer maintains a list of contributors
> in the comments. The history is maintained in the git commit log.
>
thanks for the proof-reading, to Randy Dunlap too. now I have tested the
patch against mainline.
so, anyone has a comment on my actual question about the need for a read-lock?
currently my patch looks like this (again comments are welcome):
diff -rub A/include/linux/tcp.h B/include/linux/tcp.h
--- A/include/linux/tcp.h 2012-06-22 20:37:50.000000000 +0200
+++ B/include/linux/tcp.h 2012-07-06 10:23:13.000000000 +0200
@@ -472,6 +474,15 @@
* contains related tcp_cookie_transactions fields.
*/
struct tcp_cookie_values *cookie_values;
+
+ /*
+ * TCP health monitoring counters.
+ */
+ __u32 dup_acks_sent;
+ __u32 dup_pkts_recv;
+ __u32 acks_sent;
+ __u32 pkts_recv;
+ __u32 last_ack_sent; /* Sequence number of the last ack we sent. */
};
static inline struct tcp_sock *tcp_sk(const struct sock *sk)
diff -rub A/net/ipv4/tcp_input.c B/net/ipv4/tcp_input.c
--- A/net/ipv4/tcp_input.c 2012-06-22 20:37:50.000000000 +0200
+++ B/net/ipv4/tcp_input.c 2012-07-06 10:12:12.000000000 +0200
@@ -4414,6 +4415,8 @@
}
if (!after(TCP_SKB_CB(skb)->end_seq, tp->rcv_nxt)) {
+ /* Course retransmit inefficiency- this packet has been received twice. */
+ tp->dup_pkts_recv++;
SOCK_DEBUG(sk, "ofo packet was already received\n");
__skb_unlink(skb, &tp->out_of_order_queue);
__kfree_skb(skb);
@@ -4664,6 +4667,10 @@
return;
}
+ /* A packet is a "duplicate" if it contains bytes we have already
received. */
+ if (before(TCP_SKB_CB(skb)->seq, tp->rcv_nxt))
+ tp->dup_pkts_recv++;
+
if (!after(TCP_SKB_CB(skb)->end_seq, tp->rcv_nxt)) {
/* A retransmit, 2nd most common case. Force an immediate ack. */
NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_DELAYEDACKLOST);
@@ -5375,6 +5382,13 @@
tp->rx_opt.saw_tstamp = 0;
+ /*
+ * Tcp health monitoring is interested in
+ * total per-connection packet arrivals.
+ * This is in the fast path, but is quick.
+ */
+ tp->pkts_recv++;
+
/* pred_flags is 0xS?10 << 16 + snd_wnd
* if header_prediction is to be made
* 'S' will always be tp->tcp_header_len >> 2
diff -rub A/net/ipv4/tcp_ipv4.c B/net/ipv4/tcp_ipv4.c
--- A/net/ipv4/tcp_ipv4.c 2012-06-22 20:37:50.000000000 +0200
+++ B/net/ipv4/tcp_ipv4.c 2012-07-11 09:34:22.000000000 +0200
@@ -2533,6 +2533,82 @@
return 0;
}
+
+/*
+ * Output /proc/net/tcphealth
+ */
+#define LINESZ 128
+
+int tcp_health_seq_show(struct seq_file *seq, void *v)
+{
+ int len, num;
+ char srcIP[32], destIP[32];
+
+ unsigned long SmoothedRttEstimate,
+ AcksSent, DupAcksSent, PktsRecv, DupPktsRecv;
+ struct tcp_iter_state *st;
+
+ if (v == SEQ_START_TOKEN) {
+ seq_printf(seq,
+ "TCP Health Monitoring (established connections only)\n"
+ " -Duplicate ACKs indicate lost or reordered packets on the
connection.\n"
+ " -Duplicate Packets Received signal a slow and badly inefficient
connection.\n"
+ " -RttEst estimates how long future packets will take on a round trip
over the connection.\n"
+ "id Local Address Remote Address RttEst(ms) AcksSent "
+ "DupAcksSent PktsRecv DupPktsRecv\n");
+ goto out;
+ }
+
+ /* Loop through established TCP connections */
+ st = seq->private;
+
+
+ if (st->state == TCP_SEQ_STATE_ESTABLISHED)
+ {
+/* ; //insert read-lock here */
+ const struct tcp_sock *tp = tcp_sk(v);
+ const struct inet_sock *inet = inet_sk(v);
+ __be32 dest = inet->inet_daddr;
+ __be32 src = inet->inet_rcv_saddr;
+ __u16 destp = ntohs(inet->inet_dport);
+ __u16 srcp = ntohs(inet->inet_sport);
+
+ num = st->num;
+ SmoothedRttEstimate = (tp->srtt >> 3);
+ AcksSent = tp->acks_sent;
+ DupAcksSent = tp->dup_acks_sent;
+ PktsRecv = tp->pkts_recv;
+ DupPktsRecv = tp->dup_pkts_recv;
+
+ sprintf(srcIP, "%lu.%lu.%lu.%lu:%u",
+ ((src >> 24) & 0xFF), ((src >> 16) & 0xFF), ((src >> 8) & 0xFF), (src &
0xFF),
+ srcp);
+ sprintf(destIP, "%3d.%3d.%3d.%3d:%u",
+ ((dest >> 24) & 0xFF), ((dest >> 16) & 0xFF), ((dest >> 8) & 0xFF),
(dest & 0xFF),
+ destp);
+
+ seq_printf(seq, "%d: %-21s %-21s "
+ "%8lu %8lu %8lu %8lu %8lu%n",
+ num,
+ srcIP,
+ destIP,
+ SmoothedRttEstimate,
+ AcksSent,
+ DupAcksSent,
+ PktsRecv,
+ DupPktsRecv,
+
+ &len
+ );
+
+ seq_printf(seq, "%*s\n", LINESZ - 1 - len, "");
+/* ; //insert read-unlock here */
+ }
+
+out:
+ return 0;
+}
+
static const struct file_operations tcp_afinfo_seq_fops = {
.owner = THIS_MODULE,
.open = tcp_seq_open,
@@ -2541,6 +2617,15 @@
.release = seq_release_net
};
+static struct tcp_seq_afinfo tcphealth_seq_afinfo = {
+ .name = "tcphealth",
+ .family = AF_INET,
+ .seq_fops = &tcp_afinfo_seq_fops,
+ .seq_ops = {
+ .show = tcp_health_seq_show,
+ },
+};
+
static struct tcp_seq_afinfo tcp4_seq_afinfo = {
.name = "tcp",
.family = AF_INET,
@@ -2552,12 +2637,16 @@
static int __net_init tcp4_proc_init_net(struct net *net)
{
- return tcp_proc_register(net, &tcp4_seq_afinfo);
+ int ret = tcp_proc_register(net, &tcp4_seq_afinfo);
+ if(ret == 0)
+ ret = tcp_proc_register(net, &tcphealth_seq_afinfo);
+ return ret;
}
static void __net_exit tcp4_proc_exit_net(struct net *net)
{
tcp_proc_unregister(net, &tcp4_seq_afinfo);
+ tcp_proc_unregister(net, &tcphealth_seq_afinfo);
}
static struct pernet_operations tcp4_net_ops = {
diff -rub A/net/ipv4/tcp_output.c B/net/ipv4/tcp_output.c
--- A/net/ipv4/tcp_output.c 2012-06-22 20:37:50.000000000 +0200
+++ B/net/ipv4/tcp_output.c 2012-07-06 17:15:14.000000000 +0200
@@ -2754,8 +2755,15 @@
skb_reserve(buff, MAX_TCP_HEADER);
tcp_init_nondata_skb(buff, tcp_acceptable_seq(sk), TCPHDR_ACK);
+ /* If the rcv_nxt has not advanced since sending our last ACK, this is a
duplicate. */
+ if (tcp_sk(sk)->rcv_nxt == tcp_sk(sk)->last_ack_sent)
+ tcp_sk(sk)->dup_acks_sent++;
+ /* Record the total number of acks sent on this connection. */
+ tcp_sk(sk)->acks_sent++;
+
/* Send it off, this clears delayed acks for us. */
TCP_SKB_CB(buff)->when = tcp_time_stamp;
+ tcp_sk(sk)->last_ack_sent = tcp_sk(sk)->rcv_nxt;
tcp_transmit_skb(sk, buff, 0, GFP_ATOMIC);
}
^ permalink raw reply
* Re: [PATCH v3] tg3: add device id of Apple Thunderbolt Ethernet device
From: Michael Chan @ 2012-07-13 7:19 UTC (permalink / raw)
To: Roland Dreier; +Cc: Greg KH, Matt Carlson, netdev
In-Reply-To: <CAL1RGDUK=q+_d2hnWbALde6602d92=x7+T7FUY1zPL8AtUcXcQ@mail.gmail.com>
On Thu, 2012-07-12 at 22:33 -0700, Roland Dreier wrote:
> On Thu, Jul 12, 2012 at 6:39 PM, Greg KH <gregkh@linuxfoundation.org> wrote:
> > The Apple Thunderbolt ethernet device is already listed in the driver,
> > but not hooked up in the MODULE_DEVICE_TABLE(). This fixes that and
> > allows it to work properly.
> >
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> >
> > ---
> > Resent to Cc: the proper developers this time.
> >
> > diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
> > index e47ff8b..3721833 100644
> > --- a/drivers/net/ethernet/broadcom/tg3.c
> > +++ b/drivers/net/ethernet/broadcom/tg3.c
> > @@ -298,6 +298,7 @@ static DEFINE_PCI_DEVICE_TABLE(tg3_pci_tbl) = {
> > {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57795)},
> > {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5719)},
> > {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5720)},
> > + {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57762)},
> > {PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9DXX)},
> > {PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9MXX)},
> > {PCI_DEVICE(PCI_VENDOR_ID_ALTIMA, PCI_DEVICE_ID_ALTIMA_AC1000)},
>
> I realize there's no way Greg can know the answer to this or test the
> corresponding change...
>
> But for the Broadcom guys:
> it looks like there simiarly is code in the driver for at least
>
> TG3PCI_DEVICE_TIGON3_57766
> TG3PCI_DEVICE_TIGON3_57782
> TG3PCI_DEVICE_TIGON3_57786
>
> without entries in the PCI device table. Should those similarly be added?
>
Yeah we need to add these as well, but there may be missing code to
support these chips besides the PCI ID table entries. We will get these
chips tested and send the complete patches to support these chips.
^ permalink raw reply
* Re: [RFC PATCH 1/2] net: Add new network device function to allow for MMIO batching
From: Eric Dumazet @ 2012-07-13 7:19 UTC (permalink / raw)
To: Alexander Duyck
Cc: netdev, davem, jeffrey.t.kirsher, edumazet, bhutchings, therbert,
alexander.duyck
In-Reply-To: <20120712002603.27846.23752.stgit@gitlad.jf.intel.com>
On Wed, 2012-07-11 at 17:26 -0700, Alexander Duyck wrote:
> +static inline void netdev_complete_xmit(struct netdev_queue *txq)
> +{
> + struct net_device *dev = txq->dev;
> + const struct net_device_ops *ops = dev->netdev_ops;
> +
> + if (txq->dispatch_pending < txq->dispatch_limit) {
> + if (netif_tx_queue_delayed(txq)) {
> + txq->dispatch_pending++;
> + return;
> + }
> +
> + /* start of delayed write sequence */
> + netif_tx_delay_queue(txq);
I dont understand this part. Isnt a return missing here ?
> + }
> +
> + txq->dispatch_pending = 0;
> +
> + ops->ndo_complete_xmit(dev, txq - &dev->_tx[0]);
> +}
> +
^ permalink raw reply
* Re: [PATCH net-next 4/8] wireless: Use eth_random_addr
From: Gertjan van Wingerde @ 2012-07-13 7:15 UTC (permalink / raw)
To: Joe Perches
Cc: users-poMEt7QlJxcwIE2E9O76wjtx2kNaKg5H,
netdev-u79uwXL29TY76Z2rM5mHXA,
linux-wireless-u79uwXL29TY76Z2rM5mHXA, Christian Lamparter,
Hin-Tak Leung, Johannes Berg, Herton Ronaldo Krzesinski,
David Miller, linux-kernel-u79uwXL29TY76Z2rM5mHXA, Larry Finger
In-Reply-To: <93ab9a323e85d1b0d8c7eac4db7ab7835e61efe6.1342157022.git.joe-6d6DIl74uiNBDgjK7y7TUQ@public.gmane.org>
On Fri, Jul 13, 2012 at 7:33 AM, Joe Perches <joe-6d6DIl74uiNBDgjK7y7TUQ@public.gmane.org> wrote:
> Convert the existing uses of random_ether_addr to
> the new eth_random_addr.
>
> Signed-off-by: Joe Perches <joe-6d6DIl74uiNBDgjK7y7TUQ@public.gmane.org>
For the rt2x00 parts:
Acked-by: Gertjan van Wingerde <gwingerde-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
> drivers/net/wireless/adm8211.c | 2 +-
> drivers/net/wireless/p54/eeprom.c | 2 +-
> drivers/net/wireless/rt2x00/rt2400pci.c | 2 +-
> drivers/net/wireless/rt2x00/rt2500pci.c | 2 +-
> drivers/net/wireless/rt2x00/rt2500usb.c | 2 +-
> drivers/net/wireless/rt2x00/rt2800lib.c | 2 +-
> drivers/net/wireless/rt2x00/rt61pci.c | 2 +-
> drivers/net/wireless/rt2x00/rt73usb.c | 2 +-
> drivers/net/wireless/rtl818x/rtl8180/dev.c | 2 +-
> drivers/net/wireless/rtl818x/rtl8187/dev.c | 2 +-
> 10 files changed, 10 insertions(+), 10 deletions(-)
>
---
Gertjan
^ permalink raw reply
* [PATCH] tc-bfifo: man: Add parameter value range.
From: Li Wei @ 2012-07-13 7:08 UTC (permalink / raw)
To: Stephen Hemminger; +Cc: netdev
Add value range for 'limit' parameter.
---
man/man8/tc-bfifo.8 | 4 ++++
1 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/man/man8/tc-bfifo.8 b/man/man8/tc-bfifo.8
index 8dda4bb..417e45c 100644
--- a/man/man8/tc-bfifo.8
+++ b/man/man8/tc-bfifo.8
@@ -40,8 +40,12 @@ to the interface txqueuelen, as specified with
.BR ifconfig (8)
or
.BR ip (8).
+The range for this parameter is [0, UINT32_MAX].
For bfifo, it defaults to the txqueuelen multiplied by the interface MTU.
+The range for this parameter is [0, UINT32_MAX] bytes.
+
+Note: The link layer header was considered when couting packets length.
.SH OUTPUT
The output of
--
1.7.1
^ permalink raw reply related
* Re: [PATCH v3] tg3: add device id of Apple Thunderbolt Ethernet device
From: Michael Chan @ 2012-07-13 7:06 UTC (permalink / raw)
To: Greg KH; +Cc: Matt Carlson, netdev
In-Reply-To: <20120713013944.GB6445@kroah.com>
On Thu, 2012-07-12 at 18:39 -0700, Greg KH wrote:
> The Apple Thunderbolt ethernet device is already listed in the driver,
> but not hooked up in the MODULE_DEVICE_TABLE(). This fixes that and
> allows it to work properly.
>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> ---
> Resent to Cc: the proper developers this time.
>
> diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
> index e47ff8b..3721833 100644
> --- a/drivers/net/ethernet/broadcom/tg3.c
> +++ b/drivers/net/ethernet/broadcom/tg3.c
> @@ -298,6 +298,7 @@ static DEFINE_PCI_DEVICE_TABLE(tg3_pci_tbl) = {
> {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57795)},
> {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5719)},
> {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5720)},
> + {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57762)},
> {PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9DXX)},
> {PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9MXX)},
> {PCI_DEVICE(PCI_VENDOR_ID_ALTIMA, PCI_DEVICE_ID_ALTIMA_AC1000)},
>
ACK for net-next. I don't know why Matt added everything to support
this chip except the entry in the PCI ID table.
Acked-by: Michael Chan <mchan@broadcom.com>
^ permalink raw reply
* Is TCP vulneribility patch (as in RFC 5961) done in linux?
From: Kiran (Kiran Kumar) Kella @ 2012-07-13 6:18 UTC (permalink / raw)
To: netdev@vger.kernel.org
Hi,
I just now checked in the kernel archives if the patch in section 3.2 mentioned in RFC 5961 for RST attacks with predictable sequence numbers.
I see some discussion happened in 2004 timeframe.
I was just wondering if in the latest linux source, the patch is made available.
Appreciate your quick response in this regard.
Thanks,
Kiran
^ permalink raw reply
* Re: [PATCH net-next 4/8] wireless: Use eth_random_addr
From: Hin-Tak Leung @ 2012-07-13 5:54 UTC (permalink / raw)
To: John W. Linville, Herton Ronaldo Krzesinski, Larry Finger,
Joe Perches
Cc: linux-wireless, netdev, linux-kernel
In-Reply-To: <93ab9a323e85d1b0d8c7eac4db7ab7835e61efe6.1342157022.git.joe@perches.com>
--- On Fri, 13/7/12, Joe Perches <joe@perches.com> wrote:
> From: Joe Perches <joe@perches.com>
> Subject: [PATCH net-next 4/8] wireless: Use eth_random_addr
> To: "David Miller" <davem@davemloft.net>, "John W. Linville" <linville@tuxdriver.com>, "Christian Lamparter" <chunkeey@googlemail.com>, "Ivo van Doorn" <IvDoorn@gmail.com>, "Gertjan van Wingerde" <gwingerde@gmail.com>, "Helmut Schaa" <helmut.schaa@googlemail.com>, "Herton Ronaldo Krzesinski" <herton@canonical.com>, "Hin-Tak Leung" <htl10@users.sourceforge.net>, "Larry Finger" <Larry.Finger@lwfinger.net>
> Cc: "Johannes Berg" <johannes@sipsolutions.net>, linux-wireless@vger.kernel.org, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, users@rt2x00.serialmonkey.com
> Date: Friday, 13 July, 2012, 6:33
> Convert the existing uses of
> random_ether_addr to
> the new eth_random_addr.
>
> Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Would it make sense to have a "check & set" macro?
> ---
> drivers/net/wireless/adm8211.c
> | 2 +-
> drivers/net/wireless/p54/eeprom.c
> | 2 +-
> drivers/net/wireless/rt2x00/rt2400pci.c
> | 2 +-
> drivers/net/wireless/rt2x00/rt2500pci.c
> | 2 +-
> drivers/net/wireless/rt2x00/rt2500usb.c
> | 2 +-
> drivers/net/wireless/rt2x00/rt2800lib.c
> | 2 +-
> drivers/net/wireless/rt2x00/rt61pci.c
> | 2 +-
> drivers/net/wireless/rt2x00/rt73usb.c
> | 2 +-
> drivers/net/wireless/rtl818x/rtl8180/dev.c | 2
> +-
> drivers/net/wireless/rtl818x/rtl8187/dev.c | 2
> +-
> 10 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/net/wireless/adm8211.c
> b/drivers/net/wireless/adm8211.c
> index 97afcec..689a71c 100644
> --- a/drivers/net/wireless/adm8211.c
> +++ b/drivers/net/wireless/adm8211.c
> @@ -1854,7 +1854,7 @@ static int __devinit
> adm8211_probe(struct pci_dev *pdev,
> if (!is_valid_ether_addr(perm_addr)) {
> printk(KERN_WARNING
> "%s (adm8211): Invalid hwaddr in EEPROM!\n",
>
> pci_name(pdev));
> -
> random_ether_addr(perm_addr);
> +
> eth_random_addr(perm_addr);
> }
> SET_IEEE80211_PERM_ADDR(dev,
> perm_addr);
>
> diff --git a/drivers/net/wireless/p54/eeprom.c
> b/drivers/net/wireless/p54/eeprom.c
> index 636daf2..1403709 100644
> --- a/drivers/net/wireless/p54/eeprom.c
> +++ b/drivers/net/wireless/p54/eeprom.c
> @@ -857,7 +857,7 @@ good_eeprom:
>
>
> wiphy_warn(dev->wiphy,
>
> "Invalid hwaddr! Using randomly generated
> MAC addr\n");
> -
> random_ether_addr(perm_addr);
> +
> eth_random_addr(perm_addr);
>
> SET_IEEE80211_PERM_ADDR(dev, perm_addr);
> }
>
> diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c
> b/drivers/net/wireless/rt2x00/rt2400pci.c
> index 5e6b501..8b9dbd7 100644
> --- a/drivers/net/wireless/rt2x00/rt2400pci.c
> +++ b/drivers/net/wireless/rt2x00/rt2400pci.c
> @@ -1455,7 +1455,7 @@ static int
> rt2400pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
> */
> mac = rt2x00_eeprom_addr(rt2x00dev,
> EEPROM_MAC_ADDR_0);
> if (!is_valid_ether_addr(mac)) {
> -
> random_ether_addr(mac);
> +
> eth_random_addr(mac);
> EEPROM(rt2x00dev,
> "MAC: %pM\n", mac);
> }
>
> diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c
> b/drivers/net/wireless/rt2x00/rt2500pci.c
> index 136b849..d2cf8a4 100644
> --- a/drivers/net/wireless/rt2x00/rt2500pci.c
> +++ b/drivers/net/wireless/rt2x00/rt2500pci.c
> @@ -1585,7 +1585,7 @@ static int
> rt2500pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
> */
> mac = rt2x00_eeprom_addr(rt2x00dev,
> EEPROM_MAC_ADDR_0);
> if (!is_valid_ether_addr(mac)) {
> -
> random_ether_addr(mac);
> +
> eth_random_addr(mac);
> EEPROM(rt2x00dev,
> "MAC: %pM\n", mac);
> }
>
> diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c
> b/drivers/net/wireless/rt2x00/rt2500usb.c
> index 669aecd..3aae36b 100644
> --- a/drivers/net/wireless/rt2x00/rt2500usb.c
> +++ b/drivers/net/wireless/rt2x00/rt2500usb.c
> @@ -1352,7 +1352,7 @@ static int
> rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
> */
> mac = rt2x00_eeprom_addr(rt2x00dev,
> EEPROM_MAC_ADDR_0);
> if (!is_valid_ether_addr(mac)) {
> -
> random_ether_addr(mac);
> +
> eth_random_addr(mac);
> EEPROM(rt2x00dev,
> "MAC: %pM\n", mac);
> }
>
> diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c
> b/drivers/net/wireless/rt2x00/rt2800lib.c
> index 068276e..d857d55 100644
> --- a/drivers/net/wireless/rt2x00/rt2800lib.c
> +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
> @@ -4340,7 +4340,7 @@ int rt2800_validate_eeprom(struct
> rt2x00_dev *rt2x00dev)
> */
> mac = rt2x00_eeprom_addr(rt2x00dev,
> EEPROM_MAC_ADDR_0);
> if (!is_valid_ether_addr(mac)) {
> -
> random_ether_addr(mac);
> +
> eth_random_addr(mac);
> EEPROM(rt2x00dev,
> "MAC: %pM\n", mac);
> }
>
> diff --git a/drivers/net/wireless/rt2x00/rt61pci.c
> b/drivers/net/wireless/rt2x00/rt61pci.c
> index ee22bd7..f322596 100644
> --- a/drivers/net/wireless/rt2x00/rt61pci.c
> +++ b/drivers/net/wireless/rt2x00/rt61pci.c
> @@ -2415,7 +2415,7 @@ static int
> rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
> */
> mac = rt2x00_eeprom_addr(rt2x00dev,
> EEPROM_MAC_ADDR_0);
> if (!is_valid_ether_addr(mac)) {
> -
> random_ether_addr(mac);
> +
> eth_random_addr(mac);
> EEPROM(rt2x00dev,
> "MAC: %pM\n", mac);
> }
>
> diff --git a/drivers/net/wireless/rt2x00/rt73usb.c
> b/drivers/net/wireless/rt2x00/rt73usb.c
> index 77ccbbc..ba6e434 100644
> --- a/drivers/net/wireless/rt2x00/rt73usb.c
> +++ b/drivers/net/wireless/rt2x00/rt73usb.c
> @@ -1770,7 +1770,7 @@ static int
> rt73usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
> */
> mac = rt2x00_eeprom_addr(rt2x00dev,
> EEPROM_MAC_ADDR_0);
> if (!is_valid_ether_addr(mac)) {
> -
> random_ether_addr(mac);
> +
> eth_random_addr(mac);
> EEPROM(rt2x00dev,
> "MAC: %pM\n", mac);
> }
>
> diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c
> b/drivers/net/wireless/rtl818x/rtl8180/dev.c
> index 3b50539..aceaf68 100644
> --- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
> +++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
> @@ -1078,7 +1078,7 @@ static int __devinit
> rtl8180_probe(struct pci_dev *pdev,
> if (!is_valid_ether_addr(mac_addr)) {
> printk(KERN_WARNING
> "%s (rtl8180): Invalid hwaddr! Using"
>
> " randomly generated MAC addr\n",
> pci_name(pdev));
> -
> random_ether_addr(mac_addr);
> +
> eth_random_addr(mac_addr);
> }
> SET_IEEE80211_PERM_ADDR(dev, mac_addr);
>
> diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c
> b/drivers/net/wireless/rtl818x/rtl8187/dev.c
> index 4fb1ca1..71a30b0 100644
> --- a/drivers/net/wireless/rtl818x/rtl8187/dev.c
> +++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c
> @@ -1486,7 +1486,7 @@ static int __devinit
> rtl8187_probe(struct usb_interface *intf,
> if (!is_valid_ether_addr(mac_addr)) {
> printk(KERN_WARNING
> "rtl8187: Invalid hwaddr! Using randomly "
>
> "generated MAC address\n");
> -
> random_ether_addr(mac_addr);
> +
> eth_random_addr(mac_addr);
> }
> SET_IEEE80211_PERM_ADDR(dev, mac_addr);
>
> --
> 1.7.8.111.gad25c.dirty
>
>
^ permalink raw reply
* Re: [PATCH v3] tg3: add device id of Apple Thunderbolt Ethernet device
From: Roland Dreier @ 2012-07-13 5:33 UTC (permalink / raw)
To: Greg KH; +Cc: Matt Carlson, Michael Chan, netdev
In-Reply-To: <20120713013944.GB6445@kroah.com>
On Thu, Jul 12, 2012 at 6:39 PM, Greg KH <gregkh@linuxfoundation.org> wrote:
> The Apple Thunderbolt ethernet device is already listed in the driver,
> but not hooked up in the MODULE_DEVICE_TABLE(). This fixes that and
> allows it to work properly.
>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> ---
> Resent to Cc: the proper developers this time.
>
> diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
> index e47ff8b..3721833 100644
> --- a/drivers/net/ethernet/broadcom/tg3.c
> +++ b/drivers/net/ethernet/broadcom/tg3.c
> @@ -298,6 +298,7 @@ static DEFINE_PCI_DEVICE_TABLE(tg3_pci_tbl) = {
> {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57795)},
> {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5719)},
> {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_5720)},
> + {PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, TG3PCI_DEVICE_TIGON3_57762)},
> {PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9DXX)},
> {PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_9MXX)},
> {PCI_DEVICE(PCI_VENDOR_ID_ALTIMA, PCI_DEVICE_ID_ALTIMA_AC1000)},
I realize there's no way Greg can know the answer to this or test the
corresponding change...
But for the Broadcom guys:
it looks like there simiarly is code in the driver for at least
TG3PCI_DEVICE_TIGON3_57766
TG3PCI_DEVICE_TIGON3_57782
TG3PCI_DEVICE_TIGON3_57786
without entries in the PCI device table. Should those similarly be added?
- R.
^ permalink raw reply
* [PATCH net-next 5/8] drivers/net: Use eth_random_addr
From: Joe Perches @ 2012-07-13 5:33 UTC (permalink / raw)
To: David Miller, Inaky Perez-Gonzalez, linux-wimax
Cc: Johannes Berg, netdev, linux-kernel, wimax
In-Reply-To: <cover.1342157022.git.joe@perches.com>
Convert the existing uses of random_ether_addr to
the new eth_random_addr.
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/net/tun.c | 2 +-
drivers/net/wimax/i2400m/driver.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 987aeef..961fad1 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -22,7 +22,7 @@
* Add TUNSETLINK ioctl to set the link encapsulation
*
* Mark Smith <markzzzsmith@yahoo.com.au>
- * Use random_ether_addr() for tap MAC address.
+ * Use eth_random_addr() for tap MAC address.
*
* Harald Roelle <harald.roelle@ifi.lmu.de> 2004/04/20
* Fixes in packet dropping, queue length setting and queue wakeup.
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index 47cae71..01d400d 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -897,7 +897,7 @@ int i2400m_setup(struct i2400m *i2400m, enum i2400m_bri bm_flags)
result = i2400m_read_mac_addr(i2400m);
if (result < 0)
goto error_read_mac_addr;
- random_ether_addr(i2400m->src_mac_addr);
+ eth_random_addr(i2400m->src_mac_addr);
i2400m->pm_notifier.notifier_call = i2400m_pm_notifier;
register_pm_notifier(&i2400m->pm_notifier);
--
1.7.8.111.gad25c.dirty
^ permalink raw reply related
* [PATCH net-next 4/8] wireless: Use eth_random_addr
From: Joe Perches @ 2012-07-13 5:33 UTC (permalink / raw)
To: David Miller, John W. Linville, Christian Lamparter,
Ivo van Doorn, Gertjan van Wingerde, Helmut Schaa,
Herton Ronaldo Krzesinski, Hin-Tak Leung, Larry Finger
Cc: Johannes Berg, linux-wireless, netdev, linux-kernel, users
In-Reply-To: <cover.1342157022.git.joe@perches.com>
Convert the existing uses of random_ether_addr to
the new eth_random_addr.
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/net/wireless/adm8211.c | 2 +-
drivers/net/wireless/p54/eeprom.c | 2 +-
drivers/net/wireless/rt2x00/rt2400pci.c | 2 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 2 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 2 +-
drivers/net/wireless/rt2x00/rt2800lib.c | 2 +-
drivers/net/wireless/rt2x00/rt61pci.c | 2 +-
drivers/net/wireless/rt2x00/rt73usb.c | 2 +-
drivers/net/wireless/rtl818x/rtl8180/dev.c | 2 +-
drivers/net/wireless/rtl818x/rtl8187/dev.c | 2 +-
10 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c
index 97afcec..689a71c 100644
--- a/drivers/net/wireless/adm8211.c
+++ b/drivers/net/wireless/adm8211.c
@@ -1854,7 +1854,7 @@ static int __devinit adm8211_probe(struct pci_dev *pdev,
if (!is_valid_ether_addr(perm_addr)) {
printk(KERN_WARNING "%s (adm8211): Invalid hwaddr in EEPROM!\n",
pci_name(pdev));
- random_ether_addr(perm_addr);
+ eth_random_addr(perm_addr);
}
SET_IEEE80211_PERM_ADDR(dev, perm_addr);
diff --git a/drivers/net/wireless/p54/eeprom.c b/drivers/net/wireless/p54/eeprom.c
index 636daf2..1403709 100644
--- a/drivers/net/wireless/p54/eeprom.c
+++ b/drivers/net/wireless/p54/eeprom.c
@@ -857,7 +857,7 @@ good_eeprom:
wiphy_warn(dev->wiphy,
"Invalid hwaddr! Using randomly generated MAC addr\n");
- random_ether_addr(perm_addr);
+ eth_random_addr(perm_addr);
SET_IEEE80211_PERM_ADDR(dev, perm_addr);
}
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c
index 5e6b501..8b9dbd7 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.c
+++ b/drivers/net/wireless/rt2x00/rt2400pci.c
@@ -1455,7 +1455,7 @@ static int rt2400pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
*/
mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
if (!is_valid_ether_addr(mac)) {
- random_ether_addr(mac);
+ eth_random_addr(mac);
EEPROM(rt2x00dev, "MAC: %pM\n", mac);
}
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c
index 136b849..d2cf8a4 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.c
+++ b/drivers/net/wireless/rt2x00/rt2500pci.c
@@ -1585,7 +1585,7 @@ static int rt2500pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
*/
mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
if (!is_valid_ether_addr(mac)) {
- random_ether_addr(mac);
+ eth_random_addr(mac);
EEPROM(rt2x00dev, "MAC: %pM\n", mac);
}
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 669aecd..3aae36b 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1352,7 +1352,7 @@ static int rt2500usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
*/
mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
if (!is_valid_ether_addr(mac)) {
- random_ether_addr(mac);
+ eth_random_addr(mac);
EEPROM(rt2x00dev, "MAC: %pM\n", mac);
}
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 068276e..d857d55 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -4340,7 +4340,7 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
*/
mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
if (!is_valid_ether_addr(mac)) {
- random_ether_addr(mac);
+ eth_random_addr(mac);
EEPROM(rt2x00dev, "MAC: %pM\n", mac);
}
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index ee22bd7..f322596 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2415,7 +2415,7 @@ static int rt61pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
*/
mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
if (!is_valid_ether_addr(mac)) {
- random_ether_addr(mac);
+ eth_random_addr(mac);
EEPROM(rt2x00dev, "MAC: %pM\n", mac);
}
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 77ccbbc..ba6e434 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -1770,7 +1770,7 @@ static int rt73usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
*/
mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
if (!is_valid_ether_addr(mac)) {
- random_ether_addr(mac);
+ eth_random_addr(mac);
EEPROM(rt2x00dev, "MAC: %pM\n", mac);
}
diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index 3b50539..aceaf68 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -1078,7 +1078,7 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev,
if (!is_valid_ether_addr(mac_addr)) {
printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using"
" randomly generated MAC addr\n", pci_name(pdev));
- random_ether_addr(mac_addr);
+ eth_random_addr(mac_addr);
}
SET_IEEE80211_PERM_ADDR(dev, mac_addr);
diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c
index 4fb1ca1..71a30b0 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c
@@ -1486,7 +1486,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
if (!is_valid_ether_addr(mac_addr)) {
printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly "
"generated MAC address\n");
- random_ether_addr(mac_addr);
+ eth_random_addr(mac_addr);
}
SET_IEEE80211_PERM_ADDR(dev, mac_addr);
--
1.7.8.111.gad25c.dirty
^ permalink raw reply related
* [PATCH net-next 3/8] net: usb: Use eth_random_addr
From: Joe Perches @ 2012-07-13 5:33 UTC (permalink / raw)
To: David Miller, Greg Kroah-Hartman, Steve Glendinning,
Oliver Neukum
Cc: Johannes Berg, linux-usb, netdev, linux-kernel
In-Reply-To: <cover.1342157022.git.joe@perches.com>
Convert the existing uses of random_ether_addr to
the new eth_random_addr.
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/net/usb/smsc75xx.c | 2 +-
drivers/net/usb/smsc95xx.c | 2 +-
drivers/net/usb/usbnet.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c
index 1c6e515..6c0c5b7 100644
--- a/drivers/net/usb/smsc75xx.c
+++ b/drivers/net/usb/smsc75xx.c
@@ -616,7 +616,7 @@ static void smsc75xx_init_mac_address(struct usbnet *dev)
/* no eeprom, or eeprom values are invalid. generate random MAC */
eth_hw_addr_random(dev->net);
- netif_dbg(dev, ifup, dev->net, "MAC address set to random_ether_addr");
+ netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr");
}
static int smsc75xx_set_mac_address(struct usbnet *dev)
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index bd7cbaa..25cc3a1 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -647,7 +647,7 @@ static void smsc95xx_init_mac_address(struct usbnet *dev)
/* no eeprom, or eeprom values are invalid. generate random MAC */
eth_hw_addr_random(dev->net);
- netif_dbg(dev, ifup, dev->net, "MAC address set to random_ether_addr\n");
+ netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n");
}
static int smsc95xx_set_mac_address(struct usbnet *dev)
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index e92c057..8531c1c 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1593,7 +1593,7 @@ static int __init usbnet_init(void)
BUILD_BUG_ON(
FIELD_SIZEOF(struct sk_buff, cb) < sizeof(struct skb_data));
- random_ether_addr(node_id);
+ eth_random_addr(node_id);
return 0;
}
module_init(usbnet_init);
--
1.7.8.111.gad25c.dirty
^ permalink raw reply related
* [PATCH net-next 2/8] ethernet: Use eth_random_addr
From: Joe Perches @ 2012-07-13 5:33 UTC (permalink / raw)
To: David Miller, Steve Glendinning, Chris Metcalf, Anirudha Sarangi,
John Linn
Cc: Jay Cliburn, netdev, e1000-devel, Chris Snook, Bruce Allan,
Jesse Brandeburg, linux-kernel, John Ronciak, Johannes Berg
In-Reply-To: <cover.1342157022.git.joe@perches.com>
Convert the existing uses of random_ether_addr to
the new eth_random_addr.
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/net/ethernet/atheros/atl1c/atl1c_hw.c | 2 +-
drivers/net/ethernet/atheros/atlx/atl1.c | 2 +-
drivers/net/ethernet/atheros/atlx/atl2.c | 2 +-
drivers/net/ethernet/ethoc.c | 2 +-
drivers/net/ethernet/intel/igb/igb_main.c | 4 ++--
drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 2 +-
drivers/net/ethernet/lantiq_etop.c | 2 +-
drivers/net/ethernet/micrel/ks8851.c | 2 +-
drivers/net/ethernet/micrel/ks8851_mll.c | 2 +-
drivers/net/ethernet/smsc/smsc911x.c | 2 +-
drivers/net/ethernet/ti/cpsw.c | 2 +-
drivers/net/ethernet/tile/tilegx.c | 2 +-
drivers/net/ethernet/wiznet/w5100.c | 2 +-
drivers/net/ethernet/wiznet/w5300.c | 2 +-
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 +-
15 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
index 801f012..21e261f 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.c
@@ -199,7 +199,7 @@ int atl1c_read_mac_addr(struct atl1c_hw *hw)
err = atl1c_get_permanent_address(hw);
if (err)
- random_ether_addr(hw->perm_mac_addr);
+ eth_random_addr(hw->perm_mac_addr);
memcpy(hw->mac_addr, hw->perm_mac_addr, sizeof(hw->perm_mac_addr));
return err;
diff --git a/drivers/net/ethernet/atheros/atlx/atl1.c b/drivers/net/ethernet/atheros/atlx/atl1.c
index f2402f3..7bae2ad 100644
--- a/drivers/net/ethernet/atheros/atlx/atl1.c
+++ b/drivers/net/ethernet/atheros/atlx/atl1.c
@@ -538,7 +538,7 @@ static s32 atl1_read_mac_addr(struct atl1_hw *hw)
u16 i;
if (atl1_get_permanent_address(hw)) {
- random_ether_addr(hw->perm_mac_addr);
+ eth_random_addr(hw->perm_mac_addr);
ret = 1;
}
diff --git a/drivers/net/ethernet/atheros/atlx/atl2.c b/drivers/net/ethernet/atheros/atlx/atl2.c
index 7c0b7e2..57d64b8 100644
--- a/drivers/net/ethernet/atheros/atlx/atl2.c
+++ b/drivers/net/ethernet/atheros/atlx/atl2.c
@@ -2346,7 +2346,7 @@ static s32 atl2_read_mac_addr(struct atl2_hw *hw)
{
if (get_permanent_address(hw)) {
/* for test */
- /* FIXME: shouldn't we use random_ether_addr() here? */
+ /* FIXME: shouldn't we use eth_random_addr() here? */
hw->perm_mac_addr[0] = 0x00;
hw->perm_mac_addr[1] = 0x13;
hw->perm_mac_addr[2] = 0x74;
diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c
index 2029788..94b7bfc 100644
--- a/drivers/net/ethernet/ethoc.c
+++ b/drivers/net/ethernet/ethoc.c
@@ -1057,7 +1057,7 @@ static int __devinit ethoc_probe(struct platform_device *pdev)
/* Check the MAC again for validity, if it still isn't choose and
* program a random one. */
if (!is_valid_ether_addr(netdev->dev_addr)) {
- random_ether_addr(netdev->dev_addr);
+ eth_random_addr(netdev->dev_addr);
random_mac = true;
}
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 60e3075..8adeca9 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -5008,7 +5008,7 @@ static int igb_vf_configure(struct igb_adapter *adapter, int vf)
unsigned int device_id;
u16 thisvf_devfn;
- random_ether_addr(mac_addr);
+ eth_random_addr(mac_addr);
igb_set_vf_mac(adapter, vf, mac_addr);
switch (adapter->hw.mac.type) {
@@ -5417,7 +5417,7 @@ static void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf)
/* generate a new mac address as we were hotplug removed/added */
if (!(adapter->vf_data[vf].flags & IGB_VF_FLAG_PF_SET_MAC))
- random_ether_addr(vf_mac);
+ eth_random_addr(vf_mac);
/* process remaining reset events */
igb_vf_reset(adapter, vf);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index 2d971d1..eb3f67c 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -467,7 +467,7 @@ int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
bool enable = ((event_mask & 0x10000000U) != 0);
if (enable) {
- random_ether_addr(vf_mac_addr);
+ eth_random_addr(vf_mac_addr);
e_info(probe, "IOV: VF %d is enabled MAC %pM\n",
vfn, vf_mac_addr);
/*
diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
index 9fa39eb..003c5bc 100644
--- a/drivers/net/ethernet/lantiq_etop.c
+++ b/drivers/net/ethernet/lantiq_etop.c
@@ -645,7 +645,7 @@ ltq_etop_init(struct net_device *dev)
memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
if (!is_valid_ether_addr(mac.sa_data)) {
pr_warn("etop: invalid MAC, using random\n");
- random_ether_addr(mac.sa_data);
+ eth_random_addr(mac.sa_data);
random_mac = true;
}
diff --git a/drivers/net/ethernet/micrel/ks8851.c b/drivers/net/ethernet/micrel/ks8851.c
index 5e313e9..1540ebe 100644
--- a/drivers/net/ethernet/micrel/ks8851.c
+++ b/drivers/net/ethernet/micrel/ks8851.c
@@ -422,7 +422,7 @@ static void ks8851_read_mac_addr(struct net_device *dev)
*
* Get or create the initial mac address for the device and then set that
* into the station address register. If there is an EEPROM present, then
- * we try that. If no valid mac address is found we use random_ether_addr()
+ * we try that. If no valid mac address is found we use eth_random_addr()
* to create a new one.
*/
static void ks8851_init_mac(struct ks8851_net *ks)
diff --git a/drivers/net/ethernet/micrel/ks8851_mll.c b/drivers/net/ethernet/micrel/ks8851_mll.c
index 59ef568..38529ed 100644
--- a/drivers/net/ethernet/micrel/ks8851_mll.c
+++ b/drivers/net/ethernet/micrel/ks8851_mll.c
@@ -1609,7 +1609,7 @@ static int __devinit ks8851_probe(struct platform_device *pdev)
memcpy(ks->mac_addr, pdata->mac_addr, 6);
if (!is_valid_ether_addr(ks->mac_addr)) {
/* Use random MAC address if none passed */
- random_ether_addr(ks->mac_addr);
+ eth_random_addr(ks->mac_addr);
netdev_info(netdev, "Using random mac address\n");
}
netdev_info(netdev, "Mac address is: %pM\n", ks->mac_addr);
diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c
index 54ca99d..62d1baf 100644
--- a/drivers/net/ethernet/smsc/smsc911x.c
+++ b/drivers/net/ethernet/smsc/smsc911x.c
@@ -2488,7 +2488,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
eth_hw_addr_random(dev);
smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
SMSC_TRACE(pdata, probe,
- "MAC Address is set to random_ether_addr");
+ "MAC Address is set to eth_random_addr");
}
}
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 6685bbb..ca381d3 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -748,7 +748,7 @@ static int __devinit cpsw_probe(struct platform_device *pdev)
memcpy(priv->mac_addr, data->slave_data[0].mac_addr, ETH_ALEN);
pr_info("Detected MACID = %pM", priv->mac_addr);
} else {
- random_ether_addr(priv->mac_addr);
+ eth_random_addr(priv->mac_addr);
pr_info("Random MACID = %pM", priv->mac_addr);
}
diff --git a/drivers/net/ethernet/tile/tilegx.c b/drivers/net/ethernet/tile/tilegx.c
index 83b4b38..7f50028 100644
--- a/drivers/net/ethernet/tile/tilegx.c
+++ b/drivers/net/ethernet/tile/tilegx.c
@@ -1844,7 +1844,7 @@ static void tile_net_dev_init(const char *name, const uint8_t *mac)
memcpy(dev->dev_addr, mac, 6);
dev->addr_len = 6;
} else {
- random_ether_addr(dev->dev_addr);
+ eth_random_addr(dev->dev_addr);
}
/* Register the network device. */
diff --git a/drivers/net/ethernet/wiznet/w5100.c b/drivers/net/ethernet/wiznet/w5100.c
index a75e9ef..a5826a3 100644
--- a/drivers/net/ethernet/wiznet/w5100.c
+++ b/drivers/net/ethernet/wiznet/w5100.c
@@ -637,7 +637,7 @@ static int __devinit w5100_hw_probe(struct platform_device *pdev)
if (data && is_valid_ether_addr(data->mac_addr)) {
memcpy(ndev->dev_addr, data->mac_addr, ETH_ALEN);
} else {
- random_ether_addr(ndev->dev_addr);
+ eth_random_addr(ndev->dev_addr);
ndev->addr_assign_type |= NET_ADDR_RANDOM;
}
diff --git a/drivers/net/ethernet/wiznet/w5300.c b/drivers/net/ethernet/wiznet/w5300.c
index 3306a20..bdd8891 100644
--- a/drivers/net/ethernet/wiznet/w5300.c
+++ b/drivers/net/ethernet/wiznet/w5300.c
@@ -557,7 +557,7 @@ static int __devinit w5300_hw_probe(struct platform_device *pdev)
if (data && is_valid_ether_addr(data->mac_addr)) {
memcpy(ndev->dev_addr, data->mac_addr, ETH_ALEN);
} else {
- random_ether_addr(ndev->dev_addr);
+ eth_random_addr(ndev->dev_addr);
ndev->addr_assign_type |= NET_ADDR_RANDOM;
}
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 9c365e1..0793299 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -312,7 +312,7 @@ static void axienet_set_mac_address(struct net_device *ndev, void *address)
if (address)
memcpy(ndev->dev_addr, address, ETH_ALEN);
if (!is_valid_ether_addr(ndev->dev_addr))
- random_ether_addr(ndev->dev_addr);
+ eth_random_addr(ndev->dev_addr);
/* Set up unicast MAC address filter set its mac address */
axienet_iow(lp, XAE_UAW0_OFFSET,
--
1.7.8.111.gad25c.dirty
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
^ permalink raw reply related
* [PATCH net-next 1/8] etherdevice: Rename random_ether_addr to eth_random_addr
From: Joe Perches @ 2012-07-13 5:33 UTC (permalink / raw)
To: David Miller, linux-kernel; +Cc: Johannes Berg, netdev
In-Reply-To: <cover.1342157022.git.joe@perches.com>
Add some API symmetry to eth_broadcast_addr and
add a #define to the old name for backward compatibility.
Signed-off-by: Joe Perches <joe@perches.com>
---
include/linux/etherdevice.h | 14 ++++++++------
1 files changed, 8 insertions(+), 6 deletions(-)
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index 98a27cc..d426336 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -124,19 +124,21 @@ static inline bool is_valid_ether_addr(const u8 *addr)
}
/**
- * random_ether_addr - Generate software assigned random Ethernet address
+ * eth_random_addr - Generate software assigned random Ethernet address
* @addr: Pointer to a six-byte array containing the Ethernet address
*
* Generate a random Ethernet address (MAC) that is not multicast
* and has the local assigned bit set.
*/
-static inline void random_ether_addr(u8 *addr)
+static inline void eth_random_addr(u8 *addr)
{
- get_random_bytes (addr, ETH_ALEN);
- addr [0] &= 0xfe; /* clear multicast bit */
- addr [0] |= 0x02; /* set local assignment bit (IEEE802) */
+ get_random_bytes(addr, ETH_ALEN);
+ addr[0] &= 0xfe; /* clear multicast bit */
+ addr[0] |= 0x02; /* set local assignment bit (IEEE802) */
}
+#define random_ether_addr(addr) eth_random_addr(addr)
+
/**
* eth_broadcast_addr - Assign broadcast address
* @addr: Pointer to a six-byte array containing the Ethernet address
@@ -160,7 +162,7 @@ static inline void eth_broadcast_addr(u8 *addr)
static inline void eth_hw_addr_random(struct net_device *dev)
{
dev->addr_assign_type |= NET_ADDR_RANDOM;
- random_ether_addr(dev->dev_addr);
+ eth_random_addr(dev->dev_addr);
}
/**
--
1.7.8.111.gad25c.dirty
^ permalink raw reply related
* [PATCH net-next 0/8] etherdevice: Rename random_ether_addr to eth_random_addr
From: Joe Perches @ 2012-07-13 5:33 UTC (permalink / raw)
To: David Miller, netdev, linux-usb, wimax, linux-wireless, users,
linux-s390
Cc: Johannes Berg, uclinux-dist-devel, linux-kernel, linux-c6x-dev,
linux-mips, user-mode-linux-devel, user-mode-linux-user,
e1000-devel
In-Reply-To: <1341968967.13724.23.camel@joe2Laptop>
net-next commit ad7eee98be ("etherdevice: introduce eth_broadcast_addr")
added a new style API. Rename random_ether_addr to eth_random_addr to
create some API symmetry.
Joe Perches (8):
etherdevice: Rename random_ether_addr to eth_random_addr
ethernet: Use eth_random_addr
net: usb: Use eth_random_addr
wireless: Use eth_random_addr
drivers/net: Use eth_random_addr
s390: Use eth_random_addr
usb: Use eth_random_addr
arch: Use eth_random_addr
arch/blackfin/mach-bf537/boards/stamp.c | 2 +-
arch/c6x/kernel/soc.c | 2 +-
arch/mips/ar7/platform.c | 4 ++--
arch/mips/powertv/powertv_setup.c | 6 +++---
arch/um/drivers/net_kern.c | 2 +-
drivers/net/ethernet/atheros/atl1c/atl1c_hw.c | 2 +-
drivers/net/ethernet/atheros/atlx/atl1.c | 2 +-
drivers/net/ethernet/atheros/atlx/atl2.c | 2 +-
drivers/net/ethernet/ethoc.c | 2 +-
drivers/net/ethernet/intel/igb/igb_main.c | 4 ++--
drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c | 2 +-
drivers/net/ethernet/lantiq_etop.c | 2 +-
drivers/net/ethernet/micrel/ks8851.c | 2 +-
drivers/net/ethernet/micrel/ks8851_mll.c | 2 +-
drivers/net/ethernet/smsc/smsc911x.c | 2 +-
drivers/net/ethernet/ti/cpsw.c | 2 +-
drivers/net/ethernet/tile/tilegx.c | 2 +-
drivers/net/ethernet/wiznet/w5100.c | 2 +-
drivers/net/ethernet/wiznet/w5300.c | 2 +-
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 +-
drivers/net/tun.c | 2 +-
drivers/net/usb/smsc75xx.c | 2 +-
drivers/net/usb/smsc95xx.c | 2 +-
drivers/net/usb/usbnet.c | 2 +-
drivers/net/wimax/i2400m/driver.c | 2 +-
drivers/net/wireless/adm8211.c | 2 +-
drivers/net/wireless/p54/eeprom.c | 2 +-
drivers/net/wireless/rt2x00/rt2400pci.c | 2 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 2 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 2 +-
drivers/net/wireless/rt2x00/rt2800lib.c | 2 +-
drivers/net/wireless/rt2x00/rt61pci.c | 2 +-
drivers/net/wireless/rt2x00/rt73usb.c | 2 +-
drivers/net/wireless/rtl818x/rtl8180/dev.c | 2 +-
drivers/net/wireless/rtl818x/rtl8187/dev.c | 2 +-
drivers/s390/net/qeth_l2_main.c | 2 +-
drivers/s390/net/qeth_l3_main.c | 2 +-
drivers/usb/atm/xusbatm.c | 4 ++--
drivers/usb/gadget/u_ether.c | 2 +-
include/linux/etherdevice.h | 14 ++++++++------
40 files changed, 52 insertions(+), 50 deletions(-)
--
1.7.8.111.gad25c.dirty
^ permalink raw reply
* Re: [RFC] net:phy:phylib: phy shares the same interrupt with mac
From: Jason Lin @ 2012-07-13 5:29 UTC (permalink / raw)
To: Andy Fleming; +Cc: Florian Fainelli, netdev
In-Reply-To: <CAGCDX1=-5i8uX1zXCHzofuqFJLbj+zBrNWDgMEpx8o8+rENmYQ@mail.gmail.com>
Dear:
But I think there have some performance issues.
Because the phy should execute its own ISR only when the interrupt is
issued by phy.
This will cause some unnecessary MDIO access.
By the way, PHY_DUMMY_IRQ is defined in the platform definition file.
One should get PHY_DUMMY_IRQ by platform_get_irq function.
So the driver will look like this:
/*** platform related file ***************/
static struct resource mac_0_resources[] = {
{
.start = MAC_PA_BASE,
.end = MAC_PA_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_MAC,
.flags = IORESOURCE_IRQ,
}, {
.start = IRQ_PHY,
.flags = IORESOURCE_IRQ,
},
};
/*** driver file ***************/
mydriver_probe(struct platform_device *pdev)
{
int mac_irq, phy_irq, i;
mac_irq = platform_get_irq(pdev, 0);
if (mac_irq < 0)
return mac_irq;
phy_irq = platform_get_irq(pdev, 1);
if (phy_irq < 0)
phy_irq = PHY_POLL;
for (i = 0; i < PHY_MAX_ADDR; i++)
priv->mii_bus->irq[i] = phy_irq;
}
mydriver_napi_poll(struct napi_struct *napi, int budget)
{
struct mydriver_priv *priv = = container_of(napi, struct
mydriver_priv, napi);
struct phy_device *phydev = priv->phydev;
unsigned int status = get_int_status();
#ifdef CONFIG_MAC_CONTROL_PHY_INT
if (status & PHY_INT) {
tasklet_schedule(&phydev->phy_task);
}
#endif
}
/**** phy lib modification ***************/
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 3cbda08..482f7e5 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -416,7 +416,7 @@ out_unlock:
}
EXPORT_SYMBOL(phy_start_aneg);
-
+static void phy_tasklet(unsigned long data);
static void phy_change(struct work_struct *work);
/**
@@ -523,10 +523,12 @@ static irqreturn_t phy_interrupt(int irq, void *phy_dat)
* context, so we need to disable the irq here. A work
* queue will write the PHY to disable and clear the
* interrupt, and then reenable the irq line. */
- disable_irq_nosync(irq);
+/* disable_irq_nosync(irq);
atomic_inc(&phydev->irq_disable);
- schedule_work(&phydev->phy_queue);
+ schedule_work(&phydev->phy_queue);*/
+
+ tasklet_schedule(&phydev->phy_task);
return IRQ_HANDLED;
}
@@ -591,6 +593,7 @@ int phy_start_interrupts(struct phy_device *phydev)
{
int err = 0;
+ tasklet_init(&phydev->phy_task, phy_tasklet, (unsigned long)phydev);
INIT_WORK(&phydev->phy_queue, phy_change);
atomic_set(&phydev->irq_disable, 0);
@@ -633,6 +636,7 @@ int phy_stop_interrupts(struct phy_device *phydev)
* possibly pending and take care of the matter below.
*/
cancel_work_sync(&phydev->phy_queue);
+ tasklet_kill(&phydev->phy_task);
/*
* If work indeed has been cancelled, disable_irq() will have
* been left unbalanced from phy_interrupt() and enable_irq()
@@ -645,7 +649,13 @@ int phy_stop_interrupts(struct phy_device *phydev)
}
EXPORT_SYMBOL(phy_stop_interrupts);
-
+static void phy_tasklet(unsigned long data)
+{
+ struct phy_device *phydev = (struct phy_device *)data;
+ disable_irq_nosync(phydev->irq);
+ atomic_inc(&phydev->irq_disable);
+ schedule_work(&phydev->phy_queue);
+}
/**
* phy_change - Scheduled by the phy_interrupt/timer to handle PHY changes
* @work: work_struct that describes the work to be done
diff --git a/include/linux/phy.h b/include/linux/phy.h
index c599f7e..04203a7 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -330,6 +330,7 @@ struct phy_device {
/* Interrupt and Polling infrastructure */
struct work_struct phy_queue;
struct delayed_work state_queue;
+ struct tasklet_struct phy_task;
atomic_t irq_disable;
struct mutex lock;
/*** end modification **********************************/
how about this modification?
F.Y.I.
Thanks.
2012/7/13 Jason Lin <kernel.jason@gmail.com>:
> Thank for your reply.
> My case is the second one.
> change request_irq with IRQF_SHARED, and assign the same MAC irq number to phy
> (mii_bus->irq[i] = mac_irq)
> This way can fix my issue.
>
> Thanks again.
>
> 2012/7/13 Andy Fleming <afleming@gmail.com>:
>> On Tue, Jul 10, 2012 at 8:32 PM, Jason Lin <kernel.jason@gmail.com> wrote:
>>> Dear :
>>> I describe my situation again.
>>> In my hardware design, the interrupt (INT) pin of phy is connected to
>>> the INT input pin of MAC.
>>> In other words, one of triggering interrupt condition of MAC is
>>> related to phy's interrupt.
>>> So the phy will share the same "IRQ pin" with MAC.
>>> As described above, the best solution is the INT pin of phy is
>>> connected to architecture independently.
>>> But, the hardware architecture cannot modify easily.
>>> So I think
>>> 1. We can assign dummy IRQ number (which is a empty IRQ number but
>>> large than zero) to phy.
>>> phydev->irq = PHY_DUMMY_IRQ (this value is depend on architecture)
>>> 2. Change to do the soft IRQ in phy's ISR.
>>> To schedule workqueue in this soft IRQ.
>>> In this way, the MAC can schedule phy's soft IRQ to do phy's work
>>> queue (to do ack phy's interrupt ... etc).
>>>
>>> Dose it make sense?
>>>
>>
>> If PHY_IGNORE_INTERRUPT doesn't currently work to allow a MAC's driver
>> to manage PHY interrupts, then we need to fix PHY Lib to support this
>> correctly. PHY_IGNORE_INTERRUPT was meant for this purpose. We don't
>> want to start defining interrupt numbers which may conflict with real
>> numbers, and have to be constantly re-defined by various systems to
>> avoid that.
>>
>> Your notion of making the phy_enable_interrupts() and
>> phy_disable_interrupts() code available to the MAC drivers sounds like
>> the right approach to me. But you might want to implement your own
>> version. The biggest problem with PHY interrupts is that masking them
>> requires an MDIO transaction, which is *slow*. If you can mask the
>> interrupt by writing a bit in a memory-mapped register, it's far
>> better to do it that way, at interrupt time, and *then* schedule the
>> PHY code to be run from a work queue. However, your driver probably
>> already *does* have a workqueue of some sort. If so, what you should
>> probably do is implement a new version of phy_change(), that doesn't
>> have to deal with the weird PHY interrupt masking issues. Something
>> like this:
>>
>> mydriver_phy_change(struct mydriver_priv *priv)
>> {
>> int err;
>> struct phy_device *phydev = priv->phydev;
>>
>> if (phydev->drv->did_interrupt &&
>> !phydev->drv->did_interrupt(phydev))
>> goto ignore;
>>
>> err = phy_disable_interrupts(phydev);
>>
>> if (err)
>> goto phy_err;
>>
>> mutex_lock(&phydev->lock);
>> if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
>> phydev->state = PHY_CHANGELINK;
>> mutex_unlock(&phydev->lock);
>>
>> /* Reenable interrupts */
>> if (PHY_HALTED != phydev->state)
>> err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
>>
>> if (err)
>> goto irq_enable_err;
>>
>> /* reschedule state queue work to run as soon as possible */
>> cancel_delayed_work_sync(&phydev->state_queue);
>> schedule_delayed_work(&phydev->state_queue, 0);
>>
>> return;
>>
>> ignore:
>> return;
>>
>> irq_enable_err:
>> phy_err:
>> phy_error(phydev);
>> }
>>
>>
>> Of course, now I re-read your question, and I'm not sure I've
>> interpreted it correctly. Are you saying your MAC has control of the
>> PHY interrupt (ie - the interrupt sets a bit in some event register in
>> your MAC, and you can MASK/ACK it from your driver), or that the PHY
>> shares the same interrupt pin?
>>
>> If it's the second one, you don't need to do anything, but allow your
>> MAC driver to register its interrupt as a shared interrupt, and allow
>> the PHY to manage its own interrupts, as usual.
>>
>> Andy
^ permalink raw reply related
* RE: [PATCH 02/11] enic: remove unnecessary setting of skb->dev
From: Neel Patel (neepatel) @ 2012-07-13 4:56 UTC (permalink / raw)
To: Christian Benvenuti (benve), Jon Mason, David S. Miller
Cc: netdev@vger.kernel.org, Nishank Trivedi (nistrive)
In-Reply-To: <6CE81A2095B0024BBC77007BD04E5538053EA0@xmb-aln-x02.cisco.com>
Jon,
The change in enic_main.c looks good.
_ Neel
-----Original Message-----
From: Christian Benvenuti (benve)
Sent: Thursday, July 12, 2012 2:23 PM
To: Jon Mason; David S. Miller
Cc: netdev@vger.kernel.org; Neel Patel (neepatel); Nishank Trivedi (nistrive)
Subject: RE: [PATCH 02/11] enic: remove unnecessary setting of skb->dev
Jon,
Roopa is not in the maintainer list anymore.
Sorry about that.
We will update MAINTAINERS.
BTW, the change in enic_main.c looks good.
/Chris
> -----Original Message-----
> From: Jon Mason [mailto:jdmason@kudzu.us]
> Sent: Thursday, July 12, 2012 2:19 PM
> To: David S. Miller
> Cc: netdev@vger.kernel.org; Christian Benvenuti (benve); Neel Patel
> (neepatel); Nishank Trivedi
> (nistrive)
> Subject: Re: [PATCH 02/11] enic: remove unnecessary setting of
> skb->dev
>
> On Mon, Jul 9, 2012 at 5:09 PM, Jon Mason <jdmason@kudzu.us> wrote:
> > skb->dev is being unnecessarily set after calling eth_type_trans.
> > eth_type_trans already sets skb->dev to the proper value, thus
> > making this unnecessary.
> >
> > Signed-off-by: Jon Mason <jdmason@kudzu.us>
> > Cc: Christian Benvenuti <benve@cisco.com>
> > Cc: Roopa Prabhu <roprabhu@cisco.com>
>
> This address bounced. Anyone know of an updated address for Roopa or
> should they be removed from the MAINTAINERS list?
>
> > Cc: Neel Patel <neepatel@cisco.com>
> > Cc: Nishank Trivedi <nistrive@cisco.com>
> > ---
> > drivers/net/ethernet/cisco/enic/enic_main.c | 2 --
> > 1 file changed, 2 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c
> b/drivers/net/ethernet/cisco/enic/enic_main.c
> > index 8132c78..ad1468b 100644
> > --- a/drivers/net/ethernet/cisco/enic/enic_main.c
> > +++ b/drivers/net/ethernet/cisco/enic/enic_main.c
> > @@ -1300,8 +1300,6 @@ static void enic_rq_indicate_buf(struct vnic_rq *rq,
> > skb->ip_summed = CHECKSUM_COMPLETE;
> > }
> >
> > - skb->dev = netdev;
> > -
> > if (vlan_stripped)
> > __vlan_hwaccel_put_tag(skb, vlan_tci);
> >
> > --
> > 1.7.9.5
> >
^ permalink raw reply
* Re: 82571EB: Detected Hardware Unit Hang
From: Joe Jin @ 2012-07-13 4:33 UTC (permalink / raw)
To: Dave, Tushar N
Cc: netdev@vger.kernel.org, e1000-devel@lists.sf.net,
linux-kernel@vger.kernel.org
In-Reply-To: <061C8A8601E8EE4CA8D8FD6990CEA891274F11FF@ORSMSX102.amr.corp.intel.com>
On 07/13/12 12:10, Dave, Tushar N wrote:
>> -----Original Message-----
>> From: Joe Jin [mailto:joe.jin@oracle.com]
>> Sent: Thursday, July 12, 2012 4:46 PM
>> To: Dave, Tushar N
>> Cc: e1000-devel@lists.sf.net; netdev@vger.kernel.org; linux-
>> kernel@vger.kernel.org
>> Subject: Re: 82571EB: Detected Hardware Unit Hang
>>
> Thanks for sending full dmesg log. I am still investigating. I think this issue can occur if two PCIe link partner *i.e pcie bridge and pcie device do not have same max payload size.
> I need 2 more info.
> 1) PBA number of the card.
This is a remote server and I could not get this.
> 2) full lspci -vvv output of entire system 'after you have changed max payload size to 128'.
>
00:00.0 Host bridge: Intel Corporation 5500 I/O Hub to ESI Port (rev 22)
Subsystem: Oracle Corporation Device 5352
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [60] MSI: Enable- Count=1/2 Maskable+ 64bit-
Address: 00000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 22) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Oracle Corporation Device 5352
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address: fee00000 Data: 4049
Masking: 00000003 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr+ UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 05, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 22) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Oracle Corporation Device 5352
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address: fee00000 Data: 4051
Masking: 00000003 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #51, PowerLimit 25.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 22) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=05, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: fbc00000-fbdfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Oracle Corporation Device 5352
Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
Address: fee00000 Data: 4059
Masking: 00000003 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #55, PowerLimit 25.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -3.5dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [150 v1] Access Control Services
ACSCap: SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
ACSCtl: SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
Capabilities: [160 v0] Vendor Specific Information: ID=0002 Rev=0 Len=00c <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 22) (prog-if 20 [IO(X)-APIC])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at fec8a000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [6c] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 22) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 22) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 22) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Surprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 22) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:16.0 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
Subsystem: Oracle Corporation Device 5352
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at fbbf0000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ioatdma
Kernel modules: ioatdma
00:16.1 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
Subsystem: Oracle Corporation Device 5352
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 44
Region 0: Memory at fbbec000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ioatdma
Kernel modules: ioatdma
00:16.2 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
Subsystem: Oracle Corporation Device 5352
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin C routed to IRQ 45
Region 0: Memory at fbbe8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ioatdma
Kernel modules: ioatdma
00:16.3 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
Subsystem: Oracle Corporation Device 5352
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin D routed to IRQ 46
Region 0: Memory at fbbe4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ioatdma
Kernel modules: ioatdma
00:16.4 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
Subsystem: Oracle Corporation Device 5352
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at fbbe0000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ioatdma
Kernel modules: ioatdma
00:16.5 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
Subsystem: Oracle Corporation Device 5352
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 44
Region 0: Memory at fbbdc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ioatdma
Kernel modules: ioatdma
00:16.6 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
Subsystem: Oracle Corporation Device 5352
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin C routed to IRQ 45
Region 0: Memory at fbbd8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ioatdma
Kernel modules: ioatdma
00:16.7 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
Subsystem: Oracle Corporation Device 5352
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin D routed to IRQ 46
Region 0: Memory at fbbd4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [80] MSI-X: Enable+ Count=1 Masked-
Vector table: BAR=0 offset=00002000
PBA: BAR=0 offset=00003000
Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ioatdma
Kernel modules: ioatdma
00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 (prog-if 00 [UHCI])
Subsystem: Oracle Corporation Device 5352
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 9800 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 (prog-if 00 [UHCI])
Subsystem: Oracle Corporation Device 5352
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 9480 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 (prog-if 00 [UHCI])
Subsystem: Oracle Corporation Device 5352
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 9400 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 (prog-if 20 [EHCI])
Subsystem: Oracle Corporation Device 5352
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbbf4000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 (prog-if 00 [UHCI])
Subsystem: Oracle Corporation Device 5352
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at a000 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 (prog-if 00 [UHCI])
Subsystem: Oracle Corporation Device 5352
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 9c00 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 (prog-if 00 [UHCI])
Subsystem: Oracle Corporation Device 5352
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 9880 [size=32]
Capabilities: [50] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 (prog-if 20 [EHCI])
Subsystem: Oracle Corporation Device 5352
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fbbf6000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: faf00000-fb7fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Oracle Corporation Device 5352
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
Subsystem: Oracle Corporation Device 5352
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller (prog-if 01 [AHCI 1.0])
Subsystem: Oracle Corporation Device 5352
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 53
Region 0: I/O ports at ac00 [size=8]
Region 1: I/O ports at a880 [size=4]
Region 2: I/O ports at a800 [size=8]
Region 3: I/O ports at a480 [size=4]
Region 4: I/O ports at a400 [size=32]
Region 5: Memory at fbbfa000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
Address: fee24000 Data: 4044
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
Subsystem: Oracle Corporation Device 5352
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fbbf8000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:05.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 10) (prog-if 00 [VGA controller])
Subsystem: ASPEED Technology, Inc. ASPEED Graphics Family
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=8M]
Region 1: Memory at fafe0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at bc00 [size=128]
Expansion ROM at <unassigned> [disabled]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
02:00.0 PCI bridge: Integrated Device Technology, Inc. PES12N3A PCI Express Switch (rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=02, secondary=03, subordinate=05, sec-latency=0
I/O behind bridge: 0000c000-0000dfff
Memory behind bridge: fbc00000-fbdfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Upstream Port, MSI 00
DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-SlotPowerLimit 25.000W
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [c0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [200 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=4
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=02 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32+ WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Port Arbitration Table <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
03:02.0 PCI bridge: Integrated Device Technology, Inc. PES12N3A PCI Express Switch (rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=03, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbd00000-fbdfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Downstream Port (Slot-), MSI 00
DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Surprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
Capabilities: [c0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00000 Data: 4061
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [200 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport
Kernel modules: shpchp
03:04.0 PCI bridge: Integrated Device Technology, Inc. PES12N3A PCI Express Switch (rev 0e) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=03, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fbc00000-fbcfffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Downstream Port (Slot-), MSI 00
DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Surprise+ LLActRep+ BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
Capabilities: [c0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00000 Data: 4069
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [200 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport
Kernel modules: shpchp
04:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (Copper) (rev 06)
Subsystem: Oracle Corporation x4 PCI-Express Quad Gigabit Ethernet UTP Low Profile Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 82
Region 0: Memory at fbce0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fbcc0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at cc00 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee33000 Data: 405c
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-15-17-ff-ff-b9-77-9e
Kernel driver in use: e1000e
Kernel modules: e1000e
04:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (Copper) (rev 06)
Subsystem: Oracle Corporation x4 PCI-Express Quad Gigabit Ethernet UTP Low Profile Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 83
Region 0: Memory at fbca0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fbc80000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at c880 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee13000 Data: 4064
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-15-17-ff-ff-b9-77-9e
Kernel driver in use: e1000e
Kernel modules: e1000e
05:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (Copper) (rev 06)
Subsystem: Oracle Corporation x4 PCI-Express Quad Gigabit Ethernet UTP Low Profile Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 80
Region 0: Memory at fbde0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fbdc0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at dc00 [size=32]
Expansion ROM at fbda0000 [disabled] [size=128K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee35000 Data: 406c
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt- UnxCmplt- RxOF- MalfTLP+ ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 12, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-15-17-ff-ff-b9-77-9c
Kernel driver in use: e1000e
Kernel modules: e1000e
05:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (Copper) (rev 06)
Subsystem: Oracle Corporation x4 PCI-Express Quad Gigabit Ethernet UTP Low Profile Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 81
Region 0: Memory at fbd80000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fbd60000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d880 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee15000 Data: 4054
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt- UnxCmplt- RxOF- MalfTLP+ ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 12, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-15-17-ff-ff-b9-77-9c
Kernel driver in use: e1000e
Kernel modules: e1000e
07:00.0 Ethernet controller: Intel Corporation 82575EB Gigabit Network Connection (rev 02)
Subsystem: Oracle Corporation Device 5352
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin B routed to IRQ 40
Region 0: Memory at fbee0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fbec0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at ec00 [size=32]
Region 3: Memory at fbebc000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at fbe80000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [60] MSI-X: Enable+ Count=10 Masked-
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00002000
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
DevCtl2: Completion Timeout: 16ms to 55ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP+ Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-21-28-ff-ff-75-7f-7f
Kernel driver in use: igb
Kernel modules: igb
07:00.1 Ethernet controller: Intel Corporation 82575EB Gigabit Network Connection (rev 02)
Subsystem: Oracle Corporation Device 5352
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at fbe60000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fbe40000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at e880 [size=32]
Region 3: Memory at fbe3c000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at fbe00000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [60] MSI-X: Enable+ Count=10 Masked-
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00002000
Capabilities: [a0] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <4us, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
DevCtl2: Completion Timeout: 16ms to 55ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP+ Rollover- Timeout- NonFatalErr+
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Capabilities: [140 v1] Device Serial Number 00-21-28-ff-ff-75-7f-7f
Kernel driver in use: igb
Kernel modules: igb
Thanks,
Joe
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
^ permalink raw reply
* Re: 82571EB: Detected Hardware Unit Hang
From: Dave, Tushar N @ 2012-07-13 4:10 UTC (permalink / raw)
To: Joe Jin
Cc: netdev@vger.kernel.org, e1000-devel@lists.sf.net,
linux-kernel@vger.kernel.org
In-Reply-To: <4FFF61BD.1060604@oracle.com>
>-----Original Message-----
>From: Joe Jin [mailto:joe.jin@oracle.com]
>Sent: Thursday, July 12, 2012 4:46 PM
>To: Dave, Tushar N
>Cc: e1000-devel@lists.sf.net; netdev@vger.kernel.org; linux-
>kernel@vger.kernel.org
>Subject: Re: 82571EB: Detected Hardware Unit Hang
>
Thanks for sending full dmesg log. I am still investigating. I think this issue can occur if two PCIe link partner *i.e pcie bridge and pcie device do not have same max payload size.
I need 2 more info.
1) PBA number of the card.
2) full lspci -vvv output of entire system 'after you have changed max payload size to 128'.
Thanks.
-Tushar
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
E1000-devel mailing list
E1000-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/e1000-devel
To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox