* Re: [RFC net-next] ipv6: Use destination address determined by IPVS
From: Julian Anastasov @ 2013-10-20 12:27 UTC (permalink / raw)
To: Hannes Frederic Sowa
Cc: Simon Horman,
YOSHIFUJI Hideaki / 吉藤英明, lvs-devel,
netdev, Mark Brooks, Phil Oester
In-Reply-To: <20131020073308.GE27787@order.stressinduktion.org>
Hello,
On Sun, 20 Oct 2013, Hannes Frederic Sowa wrote:
> Is your kernel compiled with CONFIG_IPV6_ROUTER_PREF?
I tested with this flag, even with your patch,
added printk in rt6_probe_deferred() to be sure. But
in my setup without router I can not test it fully.
I'm on 32-bit platform, so may be the shorter structs
fit in stack and I don't see oops.
Regards
--
Julian Anastasov <ja@ssi.bg>
^ permalink raw reply
* [PATCH net 1/3] ipv6: always prefer rt6i_gateway if present
From: Julian Anastasov @ 2013-10-20 12:43 UTC (permalink / raw)
To: David Miller; +Cc: netdev, netfilter-devel, lvs-devel, Hideaki YOSHIFUJI
In-Reply-To: <1382272985-1528-1-git-send-email-ja@ssi.bg>
In v3.9 6fd6ce2056de2709 ("ipv6: Do not depend on rt->n in
ip6_finish_output2()." changed the behaviour of ip6_finish_output2()
such that the recently introduced rt6_nexthop() is used
instead of an assigned neighbor.
As rt6_nexthop() prefers rt6i_gateway only for gatewayed
routes this causes a problem for users like IPVS, xt_TEE and
RAW(hdrincl) if they want to use different address for routing
compared to the destination address.
Another case is when redirect can create RTF_DYNAMIC
route without RTF_GATEWAY flag, we ignore the rt6i_gateway
in rt6_nexthop().
Fix the above problems by considering the rt6i_gateway if
present, so that traffic routed to address on local subnet is
not wrongly diverted to the destination address.
Thanks to Simon Horman and Phil Oester for spotting the
problematic commit.
Thanks to Hannes Frederic Sowa for his review and help in testing.
Reported-by: Phil Oester <kernel@linuxace.com>
Reported-by: Mark Brooks <mark@loadbalancer.org>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
---
include/net/ip6_route.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index f525e70..481404a 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -196,7 +196,7 @@ static inline int ip6_skb_dst_mtu(struct sk_buff *skb)
static inline struct in6_addr *rt6_nexthop(struct rt6_info *rt, struct in6_addr *dest)
{
- if (rt->rt6i_flags & RTF_GATEWAY)
+ if (rt->rt6i_flags & RTF_GATEWAY || !ipv6_addr_any(&rt->rt6i_gateway))
return &rt->rt6i_gateway;
return dest;
}
--
1.8.3.1
^ permalink raw reply related
* [PATCH net 0/3] ipv6: use rt6i_gateway as nexthop
From: Julian Anastasov @ 2013-10-20 12:43 UTC (permalink / raw)
To: David Miller; +Cc: netdev, netfilter-devel, lvs-devel, Hideaki YOSHIFUJI
The following patchset makes sure that rt6i_gateway
contains valid nexthop information in all cases, so that
we can use different nexthop for sending.
The first patch is a simple fix that makes IPVS, TEE,
RAW(hdrincl) and RTF_DYNAMIC(without RTF_GATEWAY) work as
before 3.9. There is a single corner case not solved by
this patch: RAW(hdrincl) or TEE using local address for
nexthop, a silly feature, I guess. In this case we
see zeroes in rt6i_gateway because we get route that is not
cloned. This is solved only with patch 2.
The second patch is an optimization that makes sure
all resulting routes have rt6i_gateway filled, so that we
can avoid the complex ipv6_addr_any() call added to rt6_nexthop()
by patch 1. And it sets rt6i_gateway for local routes, a case
not handled by patch 1.
The third patch uses the new rt6_nexthop() function to fix
the matching of gateways in the same way as commit bbb5823cf742a7
("netfilter: nf_conntrack: fix rt_gateway checks for H.323 helper")
fixes nf_conntrack_h323_main.c for IPv4. Currently, it depends on
the new definition of rt6_nexthop() in patch 2. Actually, if
patch 2 is applied, patch 3 becomes a cosmetic change.
I see the following two alternatives for applying these
patches:
1. Linger patch 2 in net-next to avoid surprises in the upcoming
release. In this case patch 3 can be reworked not to depend on
the new rt6_nexthop() definition in patch 2. I guess this is a
better option, so that patch 2 can be reviewed and tested for
longer time.
2. Include all 3 patches in net tree - more risky because this
is my first attempt to change IPv6.
Here is the situation as handled by patch 2:
In IPv6 the resolved routes are always host routes (/128
with DST_HOST), mostly cloned ones. We allow routes in FIB
to contain rt6i_gateway with zeroes (eg. for local subnets) but
on cloning we can fill the rt6i_gateway field in result.
This works even without this patchset.
There is a single special case where dst is provided as
skb_dst directly without a routing call: icmp6_dst_alloc(). It is a
private dst allocated just for the particular ICMP packet. Patch 2
fills rt6i_gateway in this case, needed for the new rt6_nexthop()
simplification.
The last case is addrconf_dst_alloc(), it can put in
FIB local/anycast routes when addresses are added. Patch 2
needs to fill rt6i_gateway in this case because such routes
are returned without cloning.
Julian Anastasov (3):
ipv6: always prefer rt6i_gateway if present
ipv6: fill rt6i_gateway with nexthop address
netfilter: nf_conntrack: fix rt6i_gateway checks for H.323 helper
include/net/ip6_route.h | 6 ++----
net/ipv6/ip6_output.c | 4 ++--
net/ipv6/route.c | 8 ++++++--
net/netfilter/nf_conntrack_h323_main.c | 4 ++--
4 files changed, 12 insertions(+), 10 deletions(-)
--
1.8.3.1
^ permalink raw reply
* [PATCH net 2/3] ipv6: fill rt6i_gateway with nexthop address
From: Julian Anastasov @ 2013-10-20 12:43 UTC (permalink / raw)
To: David Miller; +Cc: netdev, netfilter-devel, lvs-devel, Hideaki YOSHIFUJI
In-Reply-To: <1382272985-1528-1-git-send-email-ja@ssi.bg>
Make sure rt6i_gateway contains nexthop information in
all routes returned from lookup or when routes are directly
attached to skb for generated ICMP packets.
The effect of this patch should be a faster version of
rt6_nexthop() and the consideration of local addresses as
nexthop.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
---
include/net/ip6_route.h | 6 ++----
net/ipv6/ip6_output.c | 4 ++--
net/ipv6/route.c | 8 ++++++--
3 files changed, 10 insertions(+), 8 deletions(-)
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index 481404a..2b786b7 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -194,11 +194,9 @@ static inline int ip6_skb_dst_mtu(struct sk_buff *skb)
skb_dst(skb)->dev->mtu : dst_mtu(skb_dst(skb));
}
-static inline struct in6_addr *rt6_nexthop(struct rt6_info *rt, struct in6_addr *dest)
+static inline struct in6_addr *rt6_nexthop(struct rt6_info *rt)
{
- if (rt->rt6i_flags & RTF_GATEWAY || !ipv6_addr_any(&rt->rt6i_gateway))
- return &rt->rt6i_gateway;
- return dest;
+ return &rt->rt6i_gateway;
}
#endif
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index a54c45c..2b404df 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -105,7 +105,7 @@ static int ip6_finish_output2(struct sk_buff *skb)
}
rcu_read_lock_bh();
- nexthop = rt6_nexthop((struct rt6_info *)dst, &ipv6_hdr(skb)->daddr);
+ nexthop = rt6_nexthop((struct rt6_info *)dst);
neigh = __ipv6_neigh_lookup_noref(dst->dev, nexthop);
if (unlikely(!neigh))
neigh = __neigh_create(&nd_tbl, nexthop, dst->dev, false);
@@ -874,7 +874,7 @@ static int ip6_dst_lookup_tail(struct sock *sk,
*/
rt = (struct rt6_info *) *dst;
rcu_read_lock_bh();
- n = __ipv6_neigh_lookup_noref(rt->dst.dev, rt6_nexthop(rt, &fl6->daddr));
+ n = __ipv6_neigh_lookup_noref(rt->dst.dev, rt6_nexthop(rt));
err = n && !(n->nud_state & NUD_VALID) ? -EINVAL : 0;
rcu_read_unlock_bh();
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index c979dd9..c1ee381 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -851,7 +851,6 @@ static struct rt6_info *rt6_alloc_cow(struct rt6_info *ort,
if (ort->rt6i_dst.plen != 128 &&
ipv6_addr_equal(&ort->rt6i_dst.addr, daddr))
rt->rt6i_flags |= RTF_ANYCAST;
- rt->rt6i_gateway = *daddr;
}
rt->rt6i_flags |= RTF_CACHE;
@@ -1338,6 +1337,7 @@ struct dst_entry *icmp6_dst_alloc(struct net_device *dev,
rt->dst.flags |= DST_HOST;
rt->dst.output = ip6_output;
atomic_set(&rt->dst.__refcnt, 1);
+ rt->rt6i_gateway = fl6->daddr;
rt->rt6i_dst.addr = fl6->daddr;
rt->rt6i_dst.plen = 128;
rt->rt6i_idev = idev;
@@ -1873,7 +1873,10 @@ static struct rt6_info *ip6_rt_copy(struct rt6_info *ort,
in6_dev_hold(rt->rt6i_idev);
rt->dst.lastuse = jiffies;
- rt->rt6i_gateway = ort->rt6i_gateway;
+ if (ort->rt6i_flags & RTF_GATEWAY)
+ rt->rt6i_gateway = ort->rt6i_gateway;
+ else
+ rt->rt6i_gateway = *dest;
rt->rt6i_flags = ort->rt6i_flags;
if ((ort->rt6i_flags & (RTF_DEFAULT | RTF_ADDRCONF)) ==
(RTF_DEFAULT | RTF_ADDRCONF))
@@ -2160,6 +2163,7 @@ struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev,
else
rt->rt6i_flags |= RTF_LOCAL;
+ rt->rt6i_gateway = *addr;
rt->rt6i_dst.addr = *addr;
rt->rt6i_dst.plen = 128;
rt->rt6i_table = fib6_get_table(net, RT6_TABLE_LOCAL);
--
1.8.3.1
^ permalink raw reply related
* [PATCH net 3/3] netfilter: nf_conntrack: fix rt6i_gateway checks for H.323 helper
From: Julian Anastasov @ 2013-10-20 12:43 UTC (permalink / raw)
To: David Miller; +Cc: netdev, netfilter-devel, lvs-devel, Hideaki YOSHIFUJI
In-Reply-To: <1382272985-1528-1-git-send-email-ja@ssi.bg>
Now when rt6_nexthop() can return nexthop address we can use it
for proper nexthop comparison of directly connected destinations.
For more information refer to commit bbb5823cf742a7
("netfilter: nf_conntrack: fix rt_gateway checks for H.323 helper").
Signed-off-by: Julian Anastasov <ja@ssi.bg>
---
net/netfilter/nf_conntrack_h323_main.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/netfilter/nf_conntrack_h323_main.c b/net/netfilter/nf_conntrack_h323_main.c
index bdebd03..70866d1 100644
--- a/net/netfilter/nf_conntrack_h323_main.c
+++ b/net/netfilter/nf_conntrack_h323_main.c
@@ -778,8 +778,8 @@ static int callforward_do_filter(const union nf_inet_addr *src,
flowi6_to_flowi(&fl1), false)) {
if (!afinfo->route(&init_net, (struct dst_entry **)&rt2,
flowi6_to_flowi(&fl2), false)) {
- if (!memcmp(&rt1->rt6i_gateway, &rt2->rt6i_gateway,
- sizeof(rt1->rt6i_gateway)) &&
+ if (ipv6_addr_equal(rt6_nexthop(rt1),
+ rt6_nexthop(rt2)) &&
rt1->dst.dev == rt2->dst.dev)
ret = 1;
dst_release(&rt2->dst);
--
1.8.3.1
^ permalink raw reply related
* [PATCH net-next] bonding: move bond-specific init after enslave happens
From: Veaceslav Falico @ 2013-10-20 12:47 UTC (permalink / raw)
To: netdev; +Cc: jiri, Veaceslav Falico, Jay Vosburgh, Andy Gospodarek
As Jiri noted, currently we first do all bonding-specific initialization
(specifically - bond_select_active_slave(bond)) before we actually attach
the slave (so that it becomes visible through bond_for_each_slave() and
friends). This might result in bond_select_active_slave() not seeing the
first/new slave and, thus, not actually selecting an active slave.
Fix this by moving all the bond-related init part after we've actually
completely initialized and linked (via bond_master_upper_dev_link()) the
new slave.
After this we have all the initialization of the new slave *before*
linking, and all the stuff that needs to be done on bonding *after* it. It
has also a bonus effect - we can remove the locking on the new slave init
completely, and only use it for bond_select_active_slave().
Reported-by: Jiri Pirko <jiri@resnulli.us>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
---
drivers/net/bonding/bond_main.c | 29 ++++++++++-------------------
1 file changed, 10 insertions(+), 19 deletions(-)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index d90734f..047c0fb 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1471,22 +1471,14 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
goto err_close;
}
- write_lock_bh(&bond->lock);
-
prev_slave = bond_last_slave(bond);
bond_attach_slave(bond, new_slave);
new_slave->delay = 0;
new_slave->link_failure_count = 0;
- write_unlock_bh(&bond->lock);
-
- bond_compute_features(bond);
-
bond_update_speed_duplex(new_slave);
- read_lock(&bond->lock);
-
new_slave->last_arp_rx = jiffies -
(msecs_to_jiffies(bond->params.arp_interval) + 1);
for (i = 0; i < BOND_MAX_ARP_TARGETS; i++)
@@ -1547,12 +1539,9 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
}
}
- write_lock_bh(&bond->curr_slave_lock);
-
switch (bond->params.mode) {
case BOND_MODE_ACTIVEBACKUP:
bond_set_slave_inactive_flags(new_slave);
- bond_select_active_slave(bond);
break;
case BOND_MODE_8023AD:
/* in 802.3ad mode, the internal mechanism
@@ -1578,7 +1567,6 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
case BOND_MODE_ALB:
bond_set_active_slave(new_slave);
bond_set_slave_inactive_flags(new_slave);
- bond_select_active_slave(bond);
break;
default:
pr_debug("This slave is always active in trunk mode\n");
@@ -1596,10 +1584,6 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
break;
} /* switch(bond_mode) */
- write_unlock_bh(&bond->curr_slave_lock);
-
- bond_set_carrier(bond);
-
#ifdef CONFIG_NET_POLL_CONTROLLER
slave_dev->npinfo = bond->dev->npinfo;
if (slave_dev->npinfo) {
@@ -1614,8 +1598,6 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
}
#endif
- read_unlock(&bond->lock);
-
res = netdev_rx_handler_register(slave_dev, bond_handle_frame,
new_slave);
if (res) {
@@ -1629,6 +1611,16 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
goto err_unregister;
}
+ bond_compute_features(bond);
+ bond_set_carrier(bond);
+
+ if (USES_PRIMARY(bond->params.mode)) {
+ read_lock(&bond->lock);
+ write_lock_bh(&bond->curr_slave_lock);
+ bond_select_active_slave(bond);
+ write_unlock_bh(&bond->curr_slave_lock);
+ read_unlock(&bond->lock);
+ }
pr_info("%s: enslaving %s as a%s interface with a%s link.\n",
bond_dev->name, slave_dev->name,
@@ -1686,7 +1678,6 @@ err_free:
kfree(new_slave);
err_undo_flags:
- bond_compute_features(bond);
/* Enslave of first slave has failed and we need to fix master's mac */
if (!bond_has_slaves(bond) &&
ether_addr_equal(bond_dev->dev_addr, slave_dev->dev_addr))
--
1.8.1.4
^ permalink raw reply related
* Re: [PATCH] sfc: Fix efx_rx_buf_offset() for recycled pages
From: Ben Hutchings @ 2013-10-20 12:52 UTC (permalink / raw)
To: David Miller; +Cc: stable, netdev
In-Reply-To: <1379607231.1514.13.camel@bwh-desktop.uk.level5networks.com>
[-- Attachment #1: Type: text/plain, Size: 1362 bytes --]
On Thu, 2013-09-19 at 17:13 +0100, Ben Hutchings wrote:
> [Re-sending with cc to the current stable address. I still had the old
> address in contacts, though I've definitely sent to the current address
> previously...]
>
> This bug fix is only for stable branches older than 3.10. The bug was
> fixed upstream by commit 2768935a4660 ('sfc: reuse pages to avoid DMA
> mapping/unmapping costs'), but that change is totally unsuitable for
> stable.
>
> Commit b590ace09d51 ('sfc: Fix efx_rx_buf_offset() in the presence of
> swiotlb') added an explicit page_offset member to struct
> efx_rx_buffer, which must be set consistently with the u.page and
> dma_addr fields. However, it failed to add the necessary assignment
> in efx_resurrect_rx_buffer(). It also did not correct the calculation
> of efx_rx_buffer::dma_addr in efx_resurrect_rx_buffer(), which assumes
> that DMA-mapping a page will result in a page-aligned DMA address
> (exactly what swiotlb violates).
>
> Add the assignment of efx_rx_buffer::page_offset and change the
> calculation of dma_addr to make use of it.
>
> I'm attaching the patches for 3.0.y, 3.2.y and 3.4.y (the last of which
> should also be applicable to the later unofficial stable branches).
Queued up for 3.2.
Ben.
--
Ben Hutchings
Tomorrow will be cancelled due to lack of interest.
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply
* Re: [PATCH iproute2] ss: make socket statistic parseable
From: Hagen Paul Pfeifer @ 2013-10-20 13:24 UTC (permalink / raw)
To: Eric Dumazet; +Cc: netdev, shemminger, Eric Dumazet
In-Reply-To: <1382219776.3284.49.camel@edumazet-glaptop.roam.corp.google.com>
[-- Attachment #1: Type: text/plain, Size: 841 bytes --]
* Eric Dumazet | 2013-10-19 14:56:16 [-0700]:
>Seems fine to me, maybe we want to support json for better parsing
>capabilities ?
Currently the parsing is straight forward with Python: split for
whitespaces and subsequent split for colon to get a key/value list. Supporting
an additional format may be overhead - not sure?! But yeah, JSON formated
output is nice too. The current format has the advantage that it is human
readable and "good" machine parseable. Except the first line:
tcp ESTAB 0 0 192.168.1.29:58951 208.68.163.218:xmpp-cli
The line has a strict order, so it is not that hard to write a correct parser.
Btw: for people not following google plus circus: I wrote an parser for ss(8)
for plotting TCP stack variables:
http://research.protocollabs.com/captcp/doc-socket-statistic-module.html
Cheers, Hagen
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]
^ permalink raw reply
* Re: [PATCH iproute2] ss: make socket statistic parseable
From: Eric Dumazet @ 2013-10-20 13:44 UTC (permalink / raw)
To: Hagen Paul Pfeifer; +Cc: netdev, shemminger, Eric Dumazet
In-Reply-To: <20131020132427.GA4514@virgo.local>
On Sun, 2013-10-20 at 15:24 +0200, Hagen Paul Pfeifer wrote:
> * Eric Dumazet | 2013-10-19 14:56:16 [-0700]:
>
> >Seems fine to me, maybe we want to support json for better parsing
> >capabilities ?
>
> Currently the parsing is straight forward with Python: split for
> whitespaces and subsequent split for colon to get a key/value list. Supporting
> an additional format may be overhead - not sure?! But yeah, JSON formated
> output is nice too. The current format has the advantage that it is human
> readable and "good" machine parseable. Except the first line:
>
Yes, I was only suggesting adding the -j flag, as done lately on other
iproute2 commands. Default would stay as is ;)
> tcp ESTAB 0 0 192.168.1.29:58951 208.68.163.218:xmpp-cli
>
> The line has a strict order, so it is not that hard to write a correct parser.
>
>
> Btw: for people not following google plus circus: I wrote an parser for ss(8)
> for plotting TCP stack variables:
>
> http://research.protocollabs.com/captcp/doc-socket-statistic-module.html
Yeah, I saw that on your Google+ page, very nice tool !
Thanks
^ permalink raw reply
* Greetings
From: Sung Lee @ 2013-10-20 11:47 UTC (permalink / raw)
DAH SING BANK LTD
DES VOEUX RD.BRANCH,CENTRAL HONG KONG,
HONG KONG.
Greetings,
I am Mr.Sung Lee, Auditing and Account Credit Officer, Dah Sing Bank Ltd,(Hong Kong). I ask for your partnership in re-profiling funds Transfer.
Further to this,details would be made known if interested but in summary the funds would be transferred from my bank and further to this other informations to facilitate the remittance of the funds will be revealed to you in due course. For your assistance, you shall receive 25% of the funds to be transferred .
I will appreciate if you can reply me.
I'm looking forward to it
Sung Lee
The information contained in this email and any attachments is confidential and may be subject to copyright or other intellectual property protection. If you are not the intended recipient, you are not authorized to use or disclose this information, and we request that you notify us by reply mail or telephone and delete the original message from your mail system.
^ permalink raw reply
* [PATCH net v2 0/9] bnx2x: Bug fixes patch series
From: Yuval Mintz @ 2013-10-20 14:51 UTC (permalink / raw)
To: davem, netdev; +Cc: ariele, eilong
Hi Dave,
This patch series contains fixes for various flows - several SR-IOV issues
are fixed, ethtool callbacks (coalescing and register dump) are corrected,
null pointer dereference on error flows is prevented, etc.
Changes from V1
---------------
- Patch 2 "bnx2x: Prevent an illegal pointer dereference during panic"
is revised, with improved handling of edge cases.
Please consider applying this series to 'net'.
Thanks,
Yuval Mintz
^ permalink raw reply
* [PATCH net v2 2/9] bnx2x: Prevent an illegal pointer dereference during panic
From: Yuval Mintz @ 2013-10-20 14:51 UTC (permalink / raw)
To: davem, netdev; +Cc: ariele, eilong, Yuval Mintz, Dmitry Kravkov
In-Reply-To: <1382280694-8428-1-git-send-email-yuvalmin@broadcom.com>
During a panic, the driver tries to print the Management FW buffer of recent
commands. To do so, the driver reads the address of that buffer from a known
address. If the buffer is unavailable (e.g., PCI reads don't work, MCP is
failing, etc.), the driver will try to access the address it has read, possibly
causing a kernel panic.
This check 'sanitizes' the access, validating the read value is indeed a valid
address inside the management FW's buffers.
The patch also removes a read outside the scope of the buffer, which resulted
in some unrelated chraracters appearing in the log.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 4 +++
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 32 ++++++++++++++++++------
2 files changed, 29 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 97b3d32..d21742c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -2498,4 +2498,8 @@ enum bnx2x_pci_bus_speed {
};
void bnx2x_set_local_cmng(struct bnx2x *bp);
+
+#define MCPR_SCRATCH_BASE(bp) \
+ (CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH)
+
#endif /* bnx2x.h */
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 60f9e68..c2609c4 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -751,6 +751,10 @@ static int bnx2x_mc_assert(struct bnx2x *bp)
return rc;
}
+#define MCPR_TRACE_BUFFER_SIZE (0x800)
+#define SCRATCH_BUFFER_SIZE(bp) \
+ (CHIP_IS_E1(bp) ? 0x10000 : (CHIP_IS_E1H(bp) ? 0x20000 : 0x28000))
+
void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl)
{
u32 addr, val;
@@ -775,7 +779,17 @@ void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl)
trace_shmem_base = bp->common.shmem_base;
else
trace_shmem_base = SHMEM2_RD(bp, other_shmem_base_addr);
- addr = trace_shmem_base - 0x800;
+
+ /* sanity */
+ if (trace_shmem_base < MCPR_SCRATCH_BASE(bp) + MCPR_TRACE_BUFFER_SIZE ||
+ trace_shmem_base >= MCPR_SCRATCH_BASE(bp) +
+ SCRATCH_BUFFER_SIZE(bp)) {
+ BNX2X_ERR("Unable to dump trace buffer (mark %x)\n",
+ trace_shmem_base);
+ return;
+ }
+
+ addr = trace_shmem_base - MCPR_TRACE_BUFFER_SIZE;
/* validate TRCB signature */
mark = REG_RD(bp, addr);
@@ -787,14 +801,17 @@ void bnx2x_fw_dump_lvl(struct bnx2x *bp, const char *lvl)
/* read cyclic buffer pointer */
addr += 4;
mark = REG_RD(bp, addr);
- mark = (CHIP_IS_E1x(bp) ? MCP_REG_MCPR_SCRATCH : MCP_A_REG_MCPR_SCRATCH)
- + ((mark + 0x3) & ~0x3) - 0x08000000;
+ mark = MCPR_SCRATCH_BASE(bp) + ((mark + 0x3) & ~0x3) - 0x08000000;
+ if (mark >= trace_shmem_base || mark < addr + 4) {
+ BNX2X_ERR("Mark doesn't fall inside Trace Buffer\n");
+ return;
+ }
printk("%s" "begin fw dump (mark 0x%x)\n", lvl, mark);
printk("%s", lvl);
/* dump buffer after the mark */
- for (offset = mark; offset <= trace_shmem_base; offset += 0x8*4) {
+ for (offset = mark; offset < trace_shmem_base; offset += 0x8*4) {
for (word = 0; word < 8; word++)
data[word] = htonl(REG_RD(bp, offset + 4*word));
data[8] = 0x0;
@@ -11685,9 +11702,6 @@ static int bnx2x_init_bp(struct bnx2x *bp)
static int bnx2x_open(struct net_device *dev)
{
struct bnx2x *bp = netdev_priv(dev);
- bool global = false;
- int other_engine = BP_PATH(bp) ? 0 : 1;
- bool other_load_status, load_status;
int rc;
bp->stats_init = true;
@@ -11703,6 +11717,10 @@ static int bnx2x_open(struct net_device *dev)
* Parity recovery is only relevant for PF driver.
*/
if (IS_PF(bp)) {
+ int other_engine = BP_PATH(bp) ? 0 : 1;
+ bool other_load_status, load_status;
+ bool global = false;
+
other_load_status = bnx2x_get_load_status(bp, other_engine);
load_status = bnx2x_get_load_status(bp, BP_PATH(bp));
if (!bnx2x_reset_is_done(bp, BP_PATH(bp)) ||
--
1.8.1.227.g44fe835
^ permalink raw reply related
* [PATCH net v2 1/9] bnx2x: Fix Maximum CoS estimation for VFs
From: Yuval Mintz @ 2013-10-20 14:51 UTC (permalink / raw)
To: davem, netdev; +Cc: ariele, eilong, Yuval Mintz
In-Reply-To: <1382280694-8428-1-git-send-email-yuvalmin@broadcom.com>
bnx2x VFs do not support Multi-CoS; Current implementation
erroneously sets the VFs maximal number of CoS to be > 1.
This will cause the driver to call alloc_etherdev_mqs() with
a number of queues it cannot possibly support and reflects
in 'odd' driver prints.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 82b658d..60f9e68 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -12612,24 +12612,24 @@ static int set_max_cos_est(int chip_id)
return BNX2X_MULTI_TX_COS_E1X;
case BCM57712:
case BCM57712_MF:
- case BCM57712_VF:
return BNX2X_MULTI_TX_COS_E2_E3A0;
case BCM57800:
case BCM57800_MF:
- case BCM57800_VF:
case BCM57810:
case BCM57810_MF:
case BCM57840_4_10:
case BCM57840_2_20:
case BCM57840_O:
case BCM57840_MFO:
- case BCM57810_VF:
case BCM57840_MF:
- case BCM57840_VF:
case BCM57811:
case BCM57811_MF:
- case BCM57811_VF:
return BNX2X_MULTI_TX_COS_E3B0;
+ case BCM57712_VF:
+ case BCM57800_VF:
+ case BCM57810_VF:
+ case BCM57840_VF:
+ case BCM57811_VF:
return 1;
default:
pr_err("Unknown board_type (%d), aborting\n", chip_id);
--
1.8.1.227.g44fe835
^ permalink raw reply related
* [PATCH net v2 3/9] bnx2x: Unlock VF-PF channel on MAC/VLAN config error
From: Yuval Mintz @ 2013-10-20 14:51 UTC (permalink / raw)
To: davem, netdev; +Cc: ariele, eilong, Yuval Mintz
In-Reply-To: <1382280694-8428-1-git-send-email-yuvalmin@broadcom.com>
From: Ariel Elior <ariele@broadcom.com>
Current code returns upon failure, leaving the VF-PF in an unusable state;
This patch adds the missing release so further commands could pass between
PF and VF.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 23 ++++++++++++++---------
1 file changed, 14 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index 9ad012b..997c661 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -3390,14 +3390,16 @@ int bnx2x_set_vf_mac(struct net_device *dev, int vfidx, u8 *mac)
rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_ETH_MAC, true);
if (rc) {
BNX2X_ERR("failed to delete eth macs\n");
- return -EINVAL;
+ rc = -EINVAL;
+ goto out;
}
/* remove existing uc list macs */
rc = bnx2x_del_all_macs(bp, mac_obj, BNX2X_UC_LIST_MAC, true);
if (rc) {
BNX2X_ERR("failed to delete uc_list macs\n");
- return -EINVAL;
+ rc = -EINVAL;
+ goto out;
}
/* configure the new mac to device */
@@ -3405,6 +3407,7 @@ int bnx2x_set_vf_mac(struct net_device *dev, int vfidx, u8 *mac)
bnx2x_set_mac_one(bp, (u8 *)&bulletin->mac, mac_obj, true,
BNX2X_ETH_MAC, &ramrod_flags);
+out:
bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_MAC);
}
@@ -3467,7 +3470,8 @@ int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos)
&ramrod_flags);
if (rc) {
BNX2X_ERR("failed to delete vlans\n");
- return -EINVAL;
+ rc = -EINVAL;
+ goto out;
}
/* send queue update ramrod to configure default vlan and silent
@@ -3501,7 +3505,8 @@ int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos)
rc = bnx2x_config_vlan_mac(bp, &ramrod_param);
if (rc) {
BNX2X_ERR("failed to configure vlan\n");
- return -EINVAL;
+ rc = -EINVAL;
+ goto out;
}
/* configure default vlan to vf queue and set silent
@@ -3519,18 +3524,18 @@ int bnx2x_set_vf_vlan(struct net_device *dev, int vfidx, u16 vlan, u8 qos)
rc = bnx2x_queue_state_change(bp, &q_params);
if (rc) {
BNX2X_ERR("Failed to configure default VLAN\n");
- return rc;
+ goto out;
}
/* clear the flag indicating that this VF needs its vlan
- * (will only be set if the HV configured th Vlan before vf was
- * and we were called because the VF came up later
+ * (will only be set if the HV configured the Vlan before vf was
+ * up and we were called because the VF came up later
*/
+out:
vf->cfg_flags &= ~VF_CFG_VLAN;
-
bnx2x_unlock_vf_pf_channel(bp, vf, CHANNEL_TLV_PF_SET_VLAN);
}
- return 0;
+ return rc;
}
/* crc is the first field in the bulletin board. Compute the crc over the
--
1.8.1.227.g44fe835
^ permalink raw reply related
* [PATCH net v2 4/9] bnx2x: Fix Coalescing configuration
From: Yuval Mintz @ 2013-10-20 14:51 UTC (permalink / raw)
To: davem, netdev; +Cc: ariele, eilong, Dmitry Kravkov, Yuval Mintz
In-Reply-To: <1382280694-8428-1-git-send-email-yuvalmin@broadcom.com>
From: Dmitry Kravkov <dmitry@broadcom.com>
bnx2x drivers configure coalescing incorrectly (e.g., as a result of a call
to 'ethtool -c'). Although this is almost invisible to the user (due to NAPI)
designated tests will show the configuration is incorrect.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index d21742c..986edbf 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1621,7 +1621,7 @@ struct bnx2x {
u16 rx_ticks_int;
u16 rx_ticks;
/* Maximal coalescing timeout in us */
-#define BNX2X_MAX_COALESCE_TOUT (0xf0*12)
+#define BNX2X_MAX_COALESCE_TOUT (0xff*BNX2X_BTR)
u32 lin_cnt;
--
1.8.1.227.g44fe835
^ permalink raw reply related
* [PATCH net v2 6/9] bnx2x: Prevent null pointer dereference on error flow
From: Yuval Mintz @ 2013-10-20 14:51 UTC (permalink / raw)
To: davem, netdev; +Cc: ariele, eilong, Yuval Mintz
In-Reply-To: <1382280694-8428-1-git-send-email-yuvalmin@broadcom.com>
If debug message is open and bnx2x_vfop_qdtor_cmd() were to fail,
the resulting print would have caused a null pointer dereference.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index 997c661..bf08ad6 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -470,10 +470,10 @@ static int bnx2x_vfop_qdtor_cmd(struct bnx2x *bp,
bnx2x_vfop_qdtor, cmd->done);
return bnx2x_vfop_transition(bp, vf, bnx2x_vfop_qdtor,
cmd->block);
+ } else {
+ BNX2X_ERR("VF[%d] failed to add a vfop\n", vf->abs_vfid);
+ return -ENOMEM;
}
- DP(BNX2X_MSG_IOV, "VF[%d] failed to add a vfop. rc %d\n",
- vf->abs_vfid, vfop->rc);
- return -ENOMEM;
}
static void
--
1.8.1.227.g44fe835
^ permalink raw reply related
* [PATCH net v2 8/9] bnx2x: Don't pretend during register dump
From: Yuval Mintz @ 2013-10-20 14:51 UTC (permalink / raw)
To: davem, netdev; +Cc: ariele, eilong, Dmitry Kravkov, Yuval Mintz
In-Reply-To: <1382280694-8428-1-git-send-email-yuvalmin@broadcom.com>
From: Dmitry Kravkov <dmitry@broadcom.com>
As part of a register dump, the interface pretends to have the identity
of other interfaces of the same physical device in order to perform
HW configuration for them - specifically, it needs to prevent attentions
from generating on those functions as the register dump accesses registers
in common blocks which whose reading might generate an attention.
However, such pretension is unsafe - unlike other flows in which the driver
uses pretend, during register dump there is no guarantee no other HW access
will take place (by other flows). If such access will take place, the HW will
be accessed by the wrong interface, and leave both functions in an incorrect
state.
This patch removes all pretensions from the register dump flow. Instead, it
changes initial configuration of attentions such that no fatal attention will
be generated for other functions as a result of the register dump
(notice however, a debug print claiming an attention from other functions IS
possible during the register dump)
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
.../net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c | 40 +--
drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h | 38 ++-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 328 +++++++++++----------
3 files changed, 201 insertions(+), 205 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index 324de5f..e8efa1c9 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -891,17 +891,8 @@ static void bnx2x_get_regs(struct net_device *dev,
* will re-enable parity attentions right after the dump.
*/
- /* Disable parity on path 0 */
- bnx2x_pretend_func(bp, 0);
bnx2x_disable_blocks_parity(bp);
- /* Disable parity on path 1 */
- bnx2x_pretend_func(bp, 1);
- bnx2x_disable_blocks_parity(bp);
-
- /* Return to current function */
- bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
-
dump_hdr.header_size = (sizeof(struct dump_header) / 4) - 1;
dump_hdr.preset = DUMP_ALL_PRESETS;
dump_hdr.version = BNX2X_DUMP_VERSION;
@@ -928,18 +919,9 @@ static void bnx2x_get_regs(struct net_device *dev,
/* Actually read the registers */
__bnx2x_get_regs(bp, p);
- /* Re-enable parity attentions on path 0 */
- bnx2x_pretend_func(bp, 0);
+ /* Re-enable parity attentions */
bnx2x_clear_blocks_parity(bp);
bnx2x_enable_blocks_parity(bp);
-
- /* Re-enable parity attentions on path 1 */
- bnx2x_pretend_func(bp, 1);
- bnx2x_clear_blocks_parity(bp);
- bnx2x_enable_blocks_parity(bp);
-
- /* Return to current function */
- bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
}
static int bnx2x_get_preset_regs_len(struct net_device *dev, u32 preset)
@@ -993,17 +975,8 @@ static int bnx2x_get_dump_data(struct net_device *dev,
* will re-enable parity attentions right after the dump.
*/
- /* Disable parity on path 0 */
- bnx2x_pretend_func(bp, 0);
bnx2x_disable_blocks_parity(bp);
- /* Disable parity on path 1 */
- bnx2x_pretend_func(bp, 1);
- bnx2x_disable_blocks_parity(bp);
-
- /* Return to current function */
- bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
-
dump_hdr.header_size = (sizeof(struct dump_header) / 4) - 1;
dump_hdr.preset = bp->dump_preset_idx;
dump_hdr.version = BNX2X_DUMP_VERSION;
@@ -1032,19 +1005,10 @@ static int bnx2x_get_dump_data(struct net_device *dev,
/* Actually read the registers */
__bnx2x_get_preset_regs(bp, p, dump_hdr.preset);
- /* Re-enable parity attentions on path 0 */
- bnx2x_pretend_func(bp, 0);
+ /* Re-enable parity attentions */
bnx2x_clear_blocks_parity(bp);
bnx2x_enable_blocks_parity(bp);
- /* Re-enable parity attentions on path 1 */
- bnx2x_pretend_func(bp, 1);
- bnx2x_clear_blocks_parity(bp);
- bnx2x_enable_blocks_parity(bp);
-
- /* Return to current function */
- bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
-
return 0;
}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h
index 76df015..c2dfea7 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h
@@ -640,23 +640,35 @@ static const struct {
* [30] MCP Latched ump_tx_parity
* [31] MCP Latched scpad_parity
*/
-#define MISC_AEU_ENABLE_MCP_PRTY_BITS \
+#define MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS \
(AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY | \
AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY | \
- AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY | \
+ AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY)
+
+#define MISC_AEU_ENABLE_MCP_PRTY_BITS \
+ (MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS | \
AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY)
/* Below registers control the MCP parity attention output. When
* MISC_AEU_ENABLE_MCP_PRTY_BITS are set - attentions are
* enabled, when cleared - disabled.
*/
-static const u32 mcp_attn_ctl_regs[] = {
- MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0,
- MISC_REG_AEU_ENABLE4_NIG_0,
- MISC_REG_AEU_ENABLE4_PXP_0,
- MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0,
- MISC_REG_AEU_ENABLE4_NIG_1,
- MISC_REG_AEU_ENABLE4_PXP_1
+static const struct {
+ u32 addr;
+ u32 bits;
+} mcp_attn_ctl_regs[] = {
+ { MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0,
+ MISC_AEU_ENABLE_MCP_PRTY_BITS },
+ { MISC_REG_AEU_ENABLE4_NIG_0,
+ MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS },
+ { MISC_REG_AEU_ENABLE4_PXP_0,
+ MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS },
+ { MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0,
+ MISC_AEU_ENABLE_MCP_PRTY_BITS },
+ { MISC_REG_AEU_ENABLE4_NIG_1,
+ MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS },
+ { MISC_REG_AEU_ENABLE4_PXP_1,
+ MISC_AEU_ENABLE_MCP_PRTY_SUB_BITS }
};
static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable)
@@ -665,14 +677,14 @@ static inline void bnx2x_set_mcp_parity(struct bnx2x *bp, u8 enable)
u32 reg_val;
for (i = 0; i < ARRAY_SIZE(mcp_attn_ctl_regs); i++) {
- reg_val = REG_RD(bp, mcp_attn_ctl_regs[i]);
+ reg_val = REG_RD(bp, mcp_attn_ctl_regs[i].addr);
if (enable)
- reg_val |= MISC_AEU_ENABLE_MCP_PRTY_BITS;
+ reg_val |= mcp_attn_ctl_regs[i].bits;
else
- reg_val &= ~MISC_AEU_ENABLE_MCP_PRTY_BITS;
+ reg_val &= ~mcp_attn_ctl_regs[i].bits;
- REG_WR(bp, mcp_attn_ctl_regs[i], reg_val);
+ REG_WR(bp, mcp_attn_ctl_regs[i].addr, reg_val);
}
}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 2367072..7a66bd2 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -4297,65 +4297,60 @@ static void _print_next_block(int idx, const char *blk)
pr_cont("%s%s", idx ? ", " : "", blk);
}
-static int bnx2x_check_blocks_with_parity0(struct bnx2x *bp, u32 sig,
- int par_num, bool print)
+static bool bnx2x_check_blocks_with_parity0(struct bnx2x *bp, u32 sig,
+ int *par_num, bool print)
{
- int i = 0;
- u32 cur_bit = 0;
+ u32 cur_bit;
+ bool res;
+ int i;
+
+ res = false;
+
for (i = 0; sig; i++) {
- cur_bit = ((u32)0x1 << i);
+ cur_bit = (0x1UL << i);
if (sig & cur_bit) {
- switch (cur_bit) {
- case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR:
- if (print) {
- _print_next_block(par_num++, "BRB");
+ res |= true; /* Each bit is real error! */
+
+ if (print) {
+ switch (cur_bit) {
+ case AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR:
+ _print_next_block((*par_num)++, "BRB");
_print_parity(bp,
BRB1_REG_BRB1_PRTY_STS);
- }
- break;
- case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR:
- if (print) {
- _print_next_block(par_num++, "PARSER");
+ break;
+ case AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR:
+ _print_next_block((*par_num)++,
+ "PARSER");
_print_parity(bp, PRS_REG_PRS_PRTY_STS);
- }
- break;
- case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR:
- if (print) {
- _print_next_block(par_num++, "TSDM");
+ break;
+ case AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR:
+ _print_next_block((*par_num)++, "TSDM");
_print_parity(bp,
TSDM_REG_TSDM_PRTY_STS);
- }
- break;
- case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR:
- if (print) {
- _print_next_block(par_num++,
+ break;
+ case AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR:
+ _print_next_block((*par_num)++,
"SEARCHER");
_print_parity(bp, SRC_REG_SRC_PRTY_STS);
- }
- break;
- case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR:
- if (print) {
- _print_next_block(par_num++, "TCM");
- _print_parity(bp,
- TCM_REG_TCM_PRTY_STS);
- }
- break;
- case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR:
- if (print) {
- _print_next_block(par_num++, "TSEMI");
+ break;
+ case AEU_INPUTS_ATTN_BITS_TCM_PARITY_ERROR:
+ _print_next_block((*par_num)++, "TCM");
+ _print_parity(bp, TCM_REG_TCM_PRTY_STS);
+ break;
+ case AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR:
+ _print_next_block((*par_num)++,
+ "TSEMI");
_print_parity(bp,
TSEM_REG_TSEM_PRTY_STS_0);
_print_parity(bp,
TSEM_REG_TSEM_PRTY_STS_1);
- }
- break;
- case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR:
- if (print) {
- _print_next_block(par_num++, "XPB");
+ break;
+ case AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR:
+ _print_next_block((*par_num)++, "XPB");
_print_parity(bp, GRCBASE_XPB +
PB_REG_PB_PRTY_STS);
+ break;
}
- break;
}
/* Clear the bit */
@@ -4363,53 +4358,59 @@ static int bnx2x_check_blocks_with_parity0(struct bnx2x *bp, u32 sig,
}
}
- return par_num;
+ return res;
}
-static int bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig,
- int par_num, bool *global,
+static bool bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig,
+ int *par_num, bool *global,
bool print)
{
- int i = 0;
- u32 cur_bit = 0;
+ u32 cur_bit;
+ bool res;
+ int i;
+
+ res = false;
+
for (i = 0; sig; i++) {
- cur_bit = ((u32)0x1 << i);
+ cur_bit = (0x1UL << i);
if (sig & cur_bit) {
+ res |= true; /* Each bit is real error! */
switch (cur_bit) {
case AEU_INPUTS_ATTN_BITS_PBF_PARITY_ERROR:
if (print) {
- _print_next_block(par_num++, "PBF");
+ _print_next_block((*par_num)++, "PBF");
_print_parity(bp, PBF_REG_PBF_PRTY_STS);
}
break;
case AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR:
if (print) {
- _print_next_block(par_num++, "QM");
+ _print_next_block((*par_num)++, "QM");
_print_parity(bp, QM_REG_QM_PRTY_STS);
}
break;
case AEU_INPUTS_ATTN_BITS_TIMERS_PARITY_ERROR:
if (print) {
- _print_next_block(par_num++, "TM");
+ _print_next_block((*par_num)++, "TM");
_print_parity(bp, TM_REG_TM_PRTY_STS);
}
break;
case AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR:
if (print) {
- _print_next_block(par_num++, "XSDM");
+ _print_next_block((*par_num)++, "XSDM");
_print_parity(bp,
XSDM_REG_XSDM_PRTY_STS);
}
break;
case AEU_INPUTS_ATTN_BITS_XCM_PARITY_ERROR:
if (print) {
- _print_next_block(par_num++, "XCM");
+ _print_next_block((*par_num)++, "XCM");
_print_parity(bp, XCM_REG_XCM_PRTY_STS);
}
break;
case AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR:
if (print) {
- _print_next_block(par_num++, "XSEMI");
+ _print_next_block((*par_num)++,
+ "XSEMI");
_print_parity(bp,
XSEM_REG_XSEM_PRTY_STS_0);
_print_parity(bp,
@@ -4418,7 +4419,7 @@ static int bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig,
break;
case AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR:
if (print) {
- _print_next_block(par_num++,
+ _print_next_block((*par_num)++,
"DOORBELLQ");
_print_parity(bp,
DORQ_REG_DORQ_PRTY_STS);
@@ -4426,7 +4427,7 @@ static int bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig,
break;
case AEU_INPUTS_ATTN_BITS_NIG_PARITY_ERROR:
if (print) {
- _print_next_block(par_num++, "NIG");
+ _print_next_block((*par_num)++, "NIG");
if (CHIP_IS_E1x(bp)) {
_print_parity(bp,
NIG_REG_NIG_PRTY_STS);
@@ -4440,32 +4441,34 @@ static int bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig,
break;
case AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR:
if (print)
- _print_next_block(par_num++,
+ _print_next_block((*par_num)++,
"VAUX PCI CORE");
*global = true;
break;
case AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR:
if (print) {
- _print_next_block(par_num++, "DEBUG");
+ _print_next_block((*par_num)++,
+ "DEBUG");
_print_parity(bp, DBG_REG_DBG_PRTY_STS);
}
break;
case AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR:
if (print) {
- _print_next_block(par_num++, "USDM");
+ _print_next_block((*par_num)++, "USDM");
_print_parity(bp,
USDM_REG_USDM_PRTY_STS);
}
break;
case AEU_INPUTS_ATTN_BITS_UCM_PARITY_ERROR:
if (print) {
- _print_next_block(par_num++, "UCM");
+ _print_next_block((*par_num)++, "UCM");
_print_parity(bp, UCM_REG_UCM_PRTY_STS);
}
break;
case AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR:
if (print) {
- _print_next_block(par_num++, "USEMI");
+ _print_next_block((*par_num)++,
+ "USEMI");
_print_parity(bp,
USEM_REG_USEM_PRTY_STS_0);
_print_parity(bp,
@@ -4474,21 +4477,21 @@ static int bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig,
break;
case AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR:
if (print) {
- _print_next_block(par_num++, "UPB");
+ _print_next_block((*par_num)++, "UPB");
_print_parity(bp, GRCBASE_UPB +
PB_REG_PB_PRTY_STS);
}
break;
case AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR:
if (print) {
- _print_next_block(par_num++, "CSDM");
+ _print_next_block((*par_num)++, "CSDM");
_print_parity(bp,
CSDM_REG_CSDM_PRTY_STS);
}
break;
case AEU_INPUTS_ATTN_BITS_CCM_PARITY_ERROR:
if (print) {
- _print_next_block(par_num++, "CCM");
+ _print_next_block((*par_num)++, "CCM");
_print_parity(bp, CCM_REG_CCM_PRTY_STS);
}
break;
@@ -4499,80 +4502,73 @@ static int bnx2x_check_blocks_with_parity1(struct bnx2x *bp, u32 sig,
}
}
- return par_num;
+ return res;
}
-static int bnx2x_check_blocks_with_parity2(struct bnx2x *bp, u32 sig,
- int par_num, bool print)
+static bool bnx2x_check_blocks_with_parity2(struct bnx2x *bp, u32 sig,
+ int *par_num, bool print)
{
- int i = 0;
- u32 cur_bit = 0;
+ u32 cur_bit;
+ bool res;
+ int i;
+
+ res = false;
+
for (i = 0; sig; i++) {
- cur_bit = ((u32)0x1 << i);
+ cur_bit = (0x1UL << i);
if (sig & cur_bit) {
- switch (cur_bit) {
- case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR:
- if (print) {
- _print_next_block(par_num++, "CSEMI");
+ res |= true; /* Each bit is real error! */
+ if (print) {
+ switch (cur_bit) {
+ case AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR:
+ _print_next_block((*par_num)++,
+ "CSEMI");
_print_parity(bp,
CSEM_REG_CSEM_PRTY_STS_0);
_print_parity(bp,
CSEM_REG_CSEM_PRTY_STS_1);
- }
- break;
- case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR:
- if (print) {
- _print_next_block(par_num++, "PXP");
+ break;
+ case AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR:
+ _print_next_block((*par_num)++, "PXP");
_print_parity(bp, PXP_REG_PXP_PRTY_STS);
_print_parity(bp,
PXP2_REG_PXP2_PRTY_STS_0);
_print_parity(bp,
PXP2_REG_PXP2_PRTY_STS_1);
- }
- break;
- case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR:
- if (print)
- _print_next_block(par_num++,
- "PXPPCICLOCKCLIENT");
- break;
- case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR:
- if (print) {
- _print_next_block(par_num++, "CFC");
+ break;
+ case AEU_IN_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR:
+ _print_next_block((*par_num)++,
+ "PXPPCICLOCKCLIENT");
+ break;
+ case AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR:
+ _print_next_block((*par_num)++, "CFC");
_print_parity(bp,
CFC_REG_CFC_PRTY_STS);
- }
- break;
- case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR:
- if (print) {
- _print_next_block(par_num++, "CDU");
+ break;
+ case AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR:
+ _print_next_block((*par_num)++, "CDU");
_print_parity(bp, CDU_REG_CDU_PRTY_STS);
- }
- break;
- case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR:
- if (print) {
- _print_next_block(par_num++, "DMAE");
+ break;
+ case AEU_INPUTS_ATTN_BITS_DMAE_PARITY_ERROR:
+ _print_next_block((*par_num)++, "DMAE");
_print_parity(bp,
DMAE_REG_DMAE_PRTY_STS);
- }
- break;
- case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR:
- if (print) {
- _print_next_block(par_num++, "IGU");
+ break;
+ case AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR:
+ _print_next_block((*par_num)++, "IGU");
if (CHIP_IS_E1x(bp))
_print_parity(bp,
HC_REG_HC_PRTY_STS);
else
_print_parity(bp,
IGU_REG_IGU_PRTY_STS);
- }
- break;
- case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR:
- if (print) {
- _print_next_block(par_num++, "MISC");
+ break;
+ case AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR:
+ _print_next_block((*par_num)++, "MISC");
_print_parity(bp,
MISC_REG_MISC_PRTY_STS);
+ break;
}
- break;
}
/* Clear the bit */
@@ -4580,40 +4576,49 @@ static int bnx2x_check_blocks_with_parity2(struct bnx2x *bp, u32 sig,
}
}
- return par_num;
+ return res;
}
-static int bnx2x_check_blocks_with_parity3(u32 sig, int par_num,
- bool *global, bool print)
+static bool bnx2x_check_blocks_with_parity3(struct bnx2x *bp, u32 sig,
+ int *par_num, bool *global,
+ bool print)
{
- int i = 0;
- u32 cur_bit = 0;
+ bool res = false;
+ u32 cur_bit;
+ int i;
+
for (i = 0; sig; i++) {
- cur_bit = ((u32)0x1 << i);
+ cur_bit = (0x1UL << i);
if (sig & cur_bit) {
switch (cur_bit) {
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY:
if (print)
- _print_next_block(par_num++, "MCP ROM");
+ _print_next_block((*par_num)++,
+ "MCP ROM");
*global = true;
+ res |= true;
break;
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY:
if (print)
- _print_next_block(par_num++,
+ _print_next_block((*par_num)++,
"MCP UMP RX");
*global = true;
+ res |= true;
break;
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY:
if (print)
- _print_next_block(par_num++,
+ _print_next_block((*par_num)++,
"MCP UMP TX");
*global = true;
+ res |= true;
break;
case AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY:
if (print)
- _print_next_block(par_num++,
+ _print_next_block((*par_num)++,
"MCP SCPAD");
- *global = true;
+ /* clear latched SCPAD PATIRY from MCP */
+ REG_WR(bp, MISC_REG_AEU_CLR_LATCH_SIGNAL,
+ 1UL << 10);
break;
}
@@ -4622,45 +4627,50 @@ static int bnx2x_check_blocks_with_parity3(u32 sig, int par_num,
}
}
- return par_num;
+ return res;
}
-static int bnx2x_check_blocks_with_parity4(struct bnx2x *bp, u32 sig,
- int par_num, bool print)
+static bool bnx2x_check_blocks_with_parity4(struct bnx2x *bp, u32 sig,
+ int *par_num, bool print)
{
- int i = 0;
- u32 cur_bit = 0;
+ u32 cur_bit;
+ bool res;
+ int i;
+
+ res = false;
+
for (i = 0; sig; i++) {
- cur_bit = ((u32)0x1 << i);
+ cur_bit = (0x1UL << i);
if (sig & cur_bit) {
- switch (cur_bit) {
- case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR:
- if (print) {
- _print_next_block(par_num++, "PGLUE_B");
+ res |= true; /* Each bit is real error! */
+ if (print) {
+ switch (cur_bit) {
+ case AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR:
+ _print_next_block((*par_num)++,
+ "PGLUE_B");
_print_parity(bp,
- PGLUE_B_REG_PGLUE_B_PRTY_STS);
- }
- break;
- case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR:
- if (print) {
- _print_next_block(par_num++, "ATC");
+ PGLUE_B_REG_PGLUE_B_PRTY_STS);
+ break;
+ case AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR:
+ _print_next_block((*par_num)++, "ATC");
_print_parity(bp,
ATC_REG_ATC_PRTY_STS);
+ break;
}
- break;
}
-
/* Clear the bit */
sig &= ~cur_bit;
}
}
- return par_num;
+ return res;
}
static bool bnx2x_parity_attn(struct bnx2x *bp, bool *global, bool print,
u32 *sig)
{
+ bool res = false;
+
if ((sig[0] & HW_PRTY_ASSERT_SET_0) ||
(sig[1] & HW_PRTY_ASSERT_SET_1) ||
(sig[2] & HW_PRTY_ASSERT_SET_2) ||
@@ -4677,23 +4687,22 @@ static bool bnx2x_parity_attn(struct bnx2x *bp, bool *global, bool print,
if (print)
netdev_err(bp->dev,
"Parity errors detected in blocks: ");
- par_num = bnx2x_check_blocks_with_parity0(bp,
- sig[0] & HW_PRTY_ASSERT_SET_0, par_num, print);
- par_num = bnx2x_check_blocks_with_parity1(bp,
- sig[1] & HW_PRTY_ASSERT_SET_1, par_num, global, print);
- par_num = bnx2x_check_blocks_with_parity2(bp,
- sig[2] & HW_PRTY_ASSERT_SET_2, par_num, print);
- par_num = bnx2x_check_blocks_with_parity3(
- sig[3] & HW_PRTY_ASSERT_SET_3, par_num, global, print);
- par_num = bnx2x_check_blocks_with_parity4(bp,
- sig[4] & HW_PRTY_ASSERT_SET_4, par_num, print);
+ res |= bnx2x_check_blocks_with_parity0(bp,
+ sig[0] & HW_PRTY_ASSERT_SET_0, &par_num, print);
+ res |= bnx2x_check_blocks_with_parity1(bp,
+ sig[1] & HW_PRTY_ASSERT_SET_1, &par_num, global, print);
+ res |= bnx2x_check_blocks_with_parity2(bp,
+ sig[2] & HW_PRTY_ASSERT_SET_2, &par_num, print);
+ res |= bnx2x_check_blocks_with_parity3(bp,
+ sig[3] & HW_PRTY_ASSERT_SET_3, &par_num, global, print);
+ res |= bnx2x_check_blocks_with_parity4(bp,
+ sig[4] & HW_PRTY_ASSERT_SET_4, &par_num, print);
if (print)
pr_cont("\n");
+ }
- return true;
- } else
- return false;
+ return res;
}
/**
@@ -7143,7 +7152,7 @@ static int bnx2x_init_hw_port(struct bnx2x *bp)
int port = BP_PORT(bp);
int init_phase = port ? PHASE_PORT1 : PHASE_PORT0;
u32 low, high;
- u32 val;
+ u32 val, reg;
DP(NETIF_MSG_HW, "starting port init port %d\n", port);
@@ -7288,6 +7297,17 @@ static int bnx2x_init_hw_port(struct bnx2x *bp)
val |= CHIP_IS_E1(bp) ? 0 : 0x10;
REG_WR(bp, MISC_REG_AEU_MASK_ATTN_FUNC_0 + port*4, val);
+ /* SCPAD_PARITY should NOT trigger close the gates */
+ reg = port ? MISC_REG_AEU_ENABLE4_NIG_1 : MISC_REG_AEU_ENABLE4_NIG_0;
+ REG_WR(bp, reg,
+ REG_RD(bp, reg) &
+ ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY);
+
+ reg = port ? MISC_REG_AEU_ENABLE4_PXP_1 : MISC_REG_AEU_ENABLE4_PXP_0;
+ REG_WR(bp, reg,
+ REG_RD(bp, reg) &
+ ~AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY);
+
bnx2x_init_block(bp, BLOCK_NIG, init_phase);
if (!CHIP_IS_E1x(bp)) {
--
1.8.1.227.g44fe835
^ permalink raw reply related
* [PATCH net v2 5/9] bnx2x: Fix config when SR-IOV and iSCSI are enabled
From: Yuval Mintz @ 2013-10-20 14:51 UTC (permalink / raw)
To: davem, netdev; +Cc: ariele, eilong, Yuval Mintz
In-Reply-To: <1382280694-8428-1-git-send-email-yuvalmin@broadcom.com>
From: Ariel Elior <ariele@broadcom.com>
Starting with commit b9871bc "bnx2x: VF RSS support - PF side", if a PF will
have SR-IOV supported in its PCI configuration space, storage drivers will not
work for that interface.
This patch fixes the resource calculation to allow such a configuration to
properly work.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 986edbf..275b126 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1197,8 +1197,9 @@ union cdu_context {
/* TM (timers) host DB constants */
#define TM_ILT_PAGE_SZ_HW 0
#define TM_ILT_PAGE_SZ (4096 << TM_ILT_PAGE_SZ_HW) /* 4K */
-/* #define TM_CONN_NUM (CNIC_STARTING_CID+CNIC_ISCSI_CXT_MAX) */
-#define TM_CONN_NUM 1024
+#define TM_CONN_NUM (BNX2X_FIRST_VF_CID + \
+ BNX2X_VF_CIDS + \
+ CNIC_ISCSI_CID_MAX)
#define TM_ILT_SZ (8 * TM_CONN_NUM)
#define TM_ILT_LINES DIV_ROUND_UP(TM_ILT_SZ, TM_ILT_PAGE_SZ)
--
1.8.1.227.g44fe835
^ permalink raw reply related
* [PATCH net v2 7/9] bnx2x: Lock DMAE when used by statistic flow
From: Yuval Mintz @ 2013-10-20 14:51 UTC (permalink / raw)
To: davem, netdev; +Cc: ariele, eilong, Yuval Mintz
In-Reply-To: <1382280694-8428-1-git-send-email-yuvalmin@broadcom.com>
From: Ariel Elior <ariele@broadcom.com>
bnx2x has several clients to its DMAE machines - all of them with the exception
of the statistics flow used the same locking mechanisms to synchronize the DMAE
machines' usage.
Since statistics (which are periodically entered) use DMAE without taking the
locks, they may erase the commands which were previously set -
e.g., it may cause a VF to timeout while waiting for a PF answer on the VF-PF
channel as that command header would have been overwritten by the statistics'
header.
This patch makes certain that all flows utilizing DMAE will use the same
API, assuring that the locking scheme will be kept by all said flows.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 3 ++-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 14 +++++++-------
drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c | 2 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 2 +-
4 files changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 275b126..310c57a 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -2073,7 +2073,8 @@ u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type,
void bnx2x_prep_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae,
u8 src_type, u8 dst_type);
-int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae);
+int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae,
+ u32 *comp);
/* FLR related routines */
u32 bnx2x_flr_clnup_poll_count(struct bnx2x *bp);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index c2609c4..2367072 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -503,9 +503,9 @@ void bnx2x_prep_dmae_with_comp(struct bnx2x *bp,
}
/* issue a dmae command over the init-channel and wait for completion */
-int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae)
+int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae,
+ u32 *comp)
{
- u32 *wb_comp = bnx2x_sp(bp, wb_comp);
int cnt = CHIP_REV_IS_SLOW(bp) ? (400000) : 4000;
int rc = 0;
@@ -518,14 +518,14 @@ int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae)
spin_lock_bh(&bp->dmae_lock);
/* reset completion */
- *wb_comp = 0;
+ *comp = 0;
/* post the command on the channel used for initializations */
bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp));
/* wait for completion */
udelay(5);
- while ((*wb_comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) {
+ while ((*comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) {
if (!cnt ||
(bp->recovery_state != BNX2X_RECOVERY_DONE &&
@@ -537,7 +537,7 @@ int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, struct dmae_command *dmae)
cnt--;
udelay(50);
}
- if (*wb_comp & DMAE_PCI_ERR_FLAG) {
+ if (*comp & DMAE_PCI_ERR_FLAG) {
BNX2X_ERR("DMAE PCI error!\n");
rc = DMAE_PCI_ERROR;
}
@@ -574,7 +574,7 @@ void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr,
dmae.len = len32;
/* issue the command and wait for completion */
- rc = bnx2x_issue_dmae_with_comp(bp, &dmae);
+ rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp));
if (rc) {
BNX2X_ERR("DMAE returned failure %d\n", rc);
bnx2x_panic();
@@ -611,7 +611,7 @@ void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32)
dmae.len = len32;
/* issue the command and wait for completion */
- rc = bnx2x_issue_dmae_with_comp(bp, &dmae);
+ rc = bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp));
if (rc) {
BNX2X_ERR("DMAE returned failure %d\n", rc);
bnx2x_panic();
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
index 86436c7..3b75070 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c
@@ -196,7 +196,7 @@ static void bnx2x_hw_stats_post(struct bnx2x *bp)
} else if (bp->func_stx) {
*stats_comp = 0;
- bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp));
+ bnx2x_issue_dmae_with_comp(bp, dmae, stats_comp);
}
}
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
index da16953..28757df 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c
@@ -980,7 +980,7 @@ static int bnx2x_copy32_vf_dmae(struct bnx2x *bp, u8 from_vf,
dmae.len = len32;
/* issue the command and wait for completion */
- return bnx2x_issue_dmae_with_comp(bp, &dmae);
+ return bnx2x_issue_dmae_with_comp(bp, &dmae, bnx2x_sp(bp, wb_comp));
}
static void bnx2x_vf_mbx_resp(struct bnx2x *bp, struct bnx2x_virtf *vf)
--
1.8.1.227.g44fe835
^ permalink raw reply related
* [PATCH net v2 9/9] bnx2x: Set NETIF_F_HIGHDMA unconditionally
From: Yuval Mintz @ 2013-10-20 14:51 UTC (permalink / raw)
To: davem, netdev; +Cc: ariele, eilong, Merav Sicron, Yuval Mintz
In-Reply-To: <1382280694-8428-1-git-send-email-yuvalmin@broadcom.com>
From: Merav Sicron <meravs@broadcom.com>
Current driver implementation incorrectly sets the flag only if 64-bit
DMA mask succeeded.
Signed-off-by: Merav Sicron <meravs@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 1 -
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 4 +---
2 files changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 310c57a..c5e375d 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1528,7 +1528,6 @@ struct bnx2x {
#define PCI_32BIT_FLAG (1 << 1)
#define ONE_PORT_FLAG (1 << 2)
#define NO_WOL_FLAG (1 << 3)
-#define USING_DAC_FLAG (1 << 4)
#define USING_MSIX_FLAG (1 << 5)
#define USING_MSI_FLAG (1 << 6)
#define DISABLE_MSI_FLAG (1 << 7)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 7a66bd2..b42f89c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -12118,7 +12118,6 @@ static int bnx2x_set_coherency_mask(struct bnx2x *bp)
struct device *dev = &bp->pdev->dev;
if (dma_set_mask(dev, DMA_BIT_MASK(64)) == 0) {
- bp->flags |= USING_DAC_FLAG;
if (dma_set_coherent_mask(dev, DMA_BIT_MASK(64)) != 0) {
dev_err(dev, "dma_set_coherent_mask failed, aborting\n");
return -EIO;
@@ -12286,8 +12285,7 @@ static int bnx2x_init_dev(struct bnx2x *bp, struct pci_dev *pdev,
NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_HIGHDMA;
dev->features |= dev->hw_features | NETIF_F_HW_VLAN_CTAG_RX;
- if (bp->flags & USING_DAC_FLAG)
- dev->features |= NETIF_F_HIGHDMA;
+ dev->features |= NETIF_F_HIGHDMA;
/* Add Loopback capability to the device */
dev->hw_features |= NETIF_F_LOOPBACK;
--
1.8.1.227.g44fe835
^ permalink raw reply related
* [PATCHSET net-next v2 00/07] Support for byte queue limits on various drivers
From: Tino Reichardt @ 2013-10-20 18:13 UTC (permalink / raw)
To: netdev, David S. Miller
Hello,
this patchset is intended for net-next/linux-3.13.
It adds support for byte queue limits on various network drivers.
Since not all of them are fully tested by now, I added an bql_disable
module parameter, which can be used to disable the BQL code.
Any comments are welcome, thanks.
Tino Reichardt
This BQL patchset contains the following patches by now:
0001-8139too-Support-for-byte-queue-limits.patch
0002-r8169-Support-for-byte-queue-limits.patch
0003-tulip-Support-for-byte-queue-limits.patch
0004-via-rhine-Support-for-byte-queue-limits.patch
0005-via-velocity-Support-for-byte-queue-limits.patch
0006-3c59x-Support-for-byte-queue-limits.patch
0007-natsemi-Support-for-byte-queue-limits.patch
---
drivers/net/ethernet/3com/3c59x.c | 47 +++++++++++++++++++++++++----
drivers/net/ethernet/dec/tulip/interrupt.c | 4 +++
drivers/net/ethernet/dec/tulip/tulip.h | 1 +
drivers/net/ethernet/dec/tulip/tulip_core.c | 9 +++++-
drivers/net/ethernet/natsemi/natsemi.c | 21 +++++++++++++
drivers/net/ethernet/realtek/8139too.c | 28 ++++++++++++++---
drivers/net/ethernet/realtek/r8169.c | 14 +++++++++
drivers/net/ethernet/via/via-rhine.c | 17 +++++++++++
drivers/net/ethernet/via/via-velocity.c | 18 +++++++++++
9 files changed, 147 insertions(+), 12 deletions(-)
^ permalink raw reply
* [PATCH net-next v2 01/07] 8139too: Support for byte queue limits
From: Tino Reichardt @ 2013-10-20 18:13 UTC (permalink / raw)
To: netdev, David S. Miller, Joe Perches, Jiri Pirko, Bill Pemberton,
Greg Kroah-Hartman
In-Reply-To: <1382292803-18875-1-git-send-email-milky-kernel@mcmilk.de>
Changes to 8139too driver to use byte queue limits.
Signed-off-by: Tino Reichardt <milky-kernel@mcmilk.de>
---
drivers/net/ethernet/realtek/8139too.c | 28 +++++++++++++++++++++++-----
1 file changed, 23 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c
index 3ccedeb..c17c12f 100644
--- a/drivers/net/ethernet/realtek/8139too.c
+++ b/drivers/net/ethernet/realtek/8139too.c
@@ -160,6 +160,8 @@ static int multicast_filter_limit = 32;
/* bitmapped message enable number */
static int debug = -1;
+static bool bql_disable;
+
/*
* Receive ring size
* Warning: 64K ring has hardware issues and may lock up.
@@ -626,10 +628,12 @@ module_param(multicast_filter_limit, int, 0);
module_param_array(media, int, NULL, 0);
module_param_array(full_duplex, int, NULL, 0);
module_param(debug, int, 0);
-MODULE_PARM_DESC (debug, "8139too bitmapped message enable number");
-MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
-MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
-MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
+module_param(bql_disable, bool, 0);
+MODULE_PARM_DESC(debug, "8139too bitmapped message enable number");
+MODULE_PARM_DESC(multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
+MODULE_PARM_DESC(media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
+MODULE_PARM_DESC(full_duplex, "8139too: Force full duplex for board(s) (1)");
+MODULE_PARM_DESC(bql_disable, "8139too: Disable Byte Queue Limits functionality (default: false)");
static int read_eeprom (void __iomem *ioaddr, int location, int addr_len);
static int rtl8139_open (struct net_device *dev);
@@ -1409,6 +1413,8 @@ static void rtl8139_hw_start (struct net_device *dev)
}
netdev_dbg(dev, "init buffer addresses\n");
+ if (likely(bql_disable == false))
+ netdev_reset_queue(dev);
/* Lock Config[01234] and BMCR register writes */
RTL_W8 (Cfg9346, Cfg9346_Lock);
@@ -1639,6 +1645,9 @@ static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
tp->cur_tx = 0;
tp->dirty_tx = 0;
+ if (likely(bql_disable == false))
+ netdev_reset_queue(tp->dev);
+
/* XXX account for unsent Tx packets in tp->stats.tx_dropped */
}
@@ -1729,10 +1738,13 @@ static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb,
* to make sure that the device sees the updated data.
*/
wmb();
+ len = max_t(unsigned int, len, (unsigned int)ETH_ZLEN);
RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
- tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
+ tp->tx_flag | len);
tp->cur_tx++;
+ if (likely(bql_disable == false))
+ netdev_sent_queue(dev, len);
if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
netif_stop_queue (dev);
@@ -1750,6 +1762,7 @@ static void rtl8139_tx_interrupt (struct net_device *dev,
void __iomem *ioaddr)
{
unsigned long dirty_tx, tx_left;
+ unsigned bytes_compl = 0, pkts_compl = 0;
assert (dev != NULL);
assert (ioaddr != NULL);
@@ -1792,6 +1805,8 @@ static void rtl8139_tx_interrupt (struct net_device *dev,
u64_stats_update_begin(&tp->tx_stats.syncp);
tp->tx_stats.packets++;
tp->tx_stats.bytes += txstatus & 0x7ff;
+ pkts_compl++;
+ bytes_compl += txstatus & 0x7ff;
u64_stats_update_end(&tp->tx_stats.syncp);
}
@@ -1807,6 +1822,9 @@ static void rtl8139_tx_interrupt (struct net_device *dev,
}
#endif /* RTL8139_NDEBUG */
+ if (likely(bql_disable == false))
+ netdev_completed_queue(dev, pkts_compl, bytes_compl);
+
/* only wake the queue if we did work, and the queue is stopped */
if (tp->dirty_tx != dirty_tx) {
tp->dirty_tx = dirty_tx;
--
1.8.4.1
^ permalink raw reply related
* [PATCH net-next v2 02/07] r8169: Support for byte queue limits
From: Tino Reichardt @ 2013-10-20 18:13 UTC (permalink / raw)
To: netdev, Realtek linux nic maintainers, Igor Maravic,
Francois Romieu
In-Reply-To: <1382292803-18875-1-git-send-email-milky-kernel@mcmilk.de>
Changes to r8169 driver to use byte queue limits.
Signed-off-by: Tino Reichardt <milky-kernel@mcmilk.de>
---
drivers/net/ethernet/realtek/r8169.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 3397cee..8f12145 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -313,6 +313,7 @@ MODULE_DEVICE_TABLE(pci, rtl8169_pci_tbl);
static int rx_buf_sz = 16383;
static int use_dac;
+static bool bql_disable;
static struct {
u32 msg_enable;
} debug = { -1 };
@@ -818,6 +819,9 @@ MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>");
MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver");
module_param(use_dac, int, 0);
MODULE_PARM_DESC(use_dac, "Enable PCI DAC. Unsafe on 32 bit PCI slot.");
+module_param(bql_disable, bool, 0);
+MODULE_PARM_DESC(bql_disable,
+ "Disable Byte Queue Limits functionality (default: false)");
module_param_named(debug, debug.msg_enable, int, 0);
MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)");
MODULE_LICENSE("GPL");
@@ -5841,6 +5845,8 @@ static void rtl8169_tx_clear(struct rtl8169_private *tp)
{
rtl8169_tx_clear_range(tp, tp->dirty_tx, NUM_TX_DESC);
tp->cur_tx = tp->dirty_tx = 0;
+ if (likely(bql_disable == false))
+ netdev_reset_queue(tp->dev);
}
static void rtl_reset_work(struct rtl8169_private *tp)
@@ -6017,6 +6023,8 @@ static netdev_tx_t rtl8169_start_xmit(struct sk_buff *skb,
txd->opts2 = cpu_to_le32(opts[1]);
skb_tx_timestamp(skb);
+ if (likely(bql_disable == false))
+ netdev_sent_queue(dev, skb->len);
wmb();
@@ -6116,6 +6124,7 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev)
static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp)
{
unsigned int dirty_tx, tx_left;
+ unsigned int pkts_compl = 0, bytes_compl = 0;
dirty_tx = tp->dirty_tx;
smp_rmb();
@@ -6138,6 +6147,9 @@ static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp)
tp->tx_stats.packets++;
tp->tx_stats.bytes += tx_skb->skb->len;
u64_stats_update_end(&tp->tx_stats.syncp);
+
+ bytes_compl += tx_skb->skb->len;
+ pkts_compl++;
dev_kfree_skb(tx_skb->skb);
tx_skb->skb = NULL;
}
@@ -6155,6 +6167,8 @@ static void rtl_tx(struct net_device *dev, struct rtl8169_private *tp)
* ring status.
*/
smp_mb();
+ if (likely(bql_disable == false))
+ netdev_completed_queue(dev, pkts_compl, bytes_compl);
if (netif_queue_stopped(dev) &&
TX_FRAGS_READY_FOR(tp, MAX_SKB_FRAGS)) {
netif_wake_queue(dev);
--
1.8.4.1
^ permalink raw reply related
* [PATCH net-next v2 03/07] tulip: Support for byte queue limits
From: Tino Reichardt @ 2013-10-20 18:13 UTC (permalink / raw)
To: netdev, Grant Grundler
In-Reply-To: <1382292803-18875-1-git-send-email-milky-kernel@mcmilk.de>
Changes to tulip driver to use byte queue limits.
Signed-off-by: Tino Reichardt <milky-kernel@mcmilk.de>
---
drivers/net/ethernet/dec/tulip/interrupt.c | 4 ++++
drivers/net/ethernet/dec/tulip/tulip.h | 1 +
drivers/net/ethernet/dec/tulip/tulip_core.c | 9 ++++++++-
3 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/dec/tulip/interrupt.c b/drivers/net/ethernet/dec/tulip/interrupt.c
index 92306b3..7084267 100644
--- a/drivers/net/ethernet/dec/tulip/interrupt.c
+++ b/drivers/net/ethernet/dec/tulip/interrupt.c
@@ -532,6 +532,7 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
#endif
unsigned int work_count = tulip_max_interrupt_work;
unsigned int handled = 0;
+ unsigned int bytes_compl = 0;
/* Let's see whether the interrupt really is for us */
csr5 = ioread32(ioaddr + CSR5);
@@ -634,6 +635,7 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
PCI_DMA_TODEVICE);
/* Free the original skb. */
+ bytes_compl += tp->tx_buffers[entry].skb->len;
dev_kfree_skb_irq(tp->tx_buffers[entry].skb);
tp->tx_buffers[entry].skb = NULL;
tp->tx_buffers[entry].mapping = 0;
@@ -802,6 +804,8 @@ irqreturn_t tulip_interrupt(int irq, void *dev_instance)
}
#endif /* CONFIG_TULIP_NAPI */
+ if (likely(tulip_bql_disable == false))
+ netdev_completed_queue(dev, tx, bytes_compl);
if ((missed = ioread32(ioaddr + CSR8) & 0x1ffff)) {
dev->stats.rx_dropped += missed & 0x10000 ? 0x10000 : missed;
}
diff --git a/drivers/net/ethernet/dec/tulip/tulip.h b/drivers/net/ethernet/dec/tulip/tulip.h
index 38431a1..3c62870 100644
--- a/drivers/net/ethernet/dec/tulip/tulip.h
+++ b/drivers/net/ethernet/dec/tulip/tulip.h
@@ -513,6 +513,7 @@ void comet_timer(unsigned long data);
/* tulip_core.c */
extern int tulip_debug;
+extern bool tulip_bql_disable;
extern const char * const medianame[];
extern const char tulip_media_cap[];
extern struct tulip_chip_table tulip_tbl[];
diff --git a/drivers/net/ethernet/dec/tulip/tulip_core.c b/drivers/net/ethernet/dec/tulip/tulip_core.c
index 4e8cfa2..d02eaa1 100644
--- a/drivers/net/ethernet/dec/tulip/tulip_core.c
+++ b/drivers/net/ethernet/dec/tulip/tulip_core.c
@@ -106,11 +106,13 @@ static int csr0 = 0x00A00000 | 0x4800;
/* Time in jiffies before concluding the transmitter is hung. */
#define TX_TIMEOUT (4*HZ)
-
MODULE_AUTHOR("The Linux Kernel Team");
MODULE_DESCRIPTION("Digital 21*4* Tulip ethernet driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+module_param(tulip_bql_disable, bool, 0);
+MODULE_PARM_DESC(tulip_bql_disable,
+ "Disable Byte Queue Limits functionality (default: false)");
module_param(tulip_debug, int, 0);
module_param(max_interrupt_work, int, 0);
module_param(rx_copybreak, int, 0);
@@ -123,6 +125,7 @@ int tulip_debug = TULIP_DEBUG;
#else
int tulip_debug = 1;
#endif
+bool tulip_bql_disable;
static void tulip_timer(unsigned long data)
{
@@ -703,6 +706,8 @@ tulip_start_xmit(struct sk_buff *skb, struct net_device *dev)
wmb();
tp->cur_tx++;
+ if (likely(tulip_bql_disable == false))
+ netdev_sent_queue(dev, skb->len);
/* Trigger an immediate transmit demand. */
iowrite32(0, tp->base_addr + CSR1);
@@ -746,6 +751,8 @@ static void tulip_clean_tx_ring(struct tulip_private *tp)
tp->tx_buffers[entry].skb = NULL;
tp->tx_buffers[entry].mapping = 0;
}
+ if (likely(tulip_bql_disable == false))
+ netdev_reset_queue(tp->dev);
}
static void tulip_down (struct net_device *dev)
--
1.8.4.1
^ permalink raw reply related
* [PATCH net-next v2 04/07] via-rhine: Support for byte queue limits
From: Tino Reichardt @ 2013-10-20 18:13 UTC (permalink / raw)
To: netdev, Roger Luethi
In-Reply-To: <1382292803-18875-1-git-send-email-milky-kernel@mcmilk.de>
Changes to via-rhine driver to use byte queue limits.
Signed-off-by: Tino Reichardt <milky-kernel@mcmilk.de>
---
drivers/net/ethernet/via/via-rhine.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/net/ethernet/via/via-rhine.c b/drivers/net/ethernet/via/via-rhine.c
index bdf697b..067b4ab 100644
--- a/drivers/net/ethernet/via/via-rhine.c
+++ b/drivers/net/ethernet/via/via-rhine.c
@@ -53,6 +53,8 @@ static int rx_copybreak = 1518;
static int rx_copybreak;
#endif
+static bool bql_disable;
+
/* Work-around for broken BIOSes: they are unable to get the chip back out of
power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */
static bool avoid_D3;
@@ -128,9 +130,11 @@ MODULE_DESCRIPTION("VIA Rhine PCI Fast Ethernet driver");
MODULE_LICENSE("GPL");
module_param(debug, int, 0);
+module_param(bql_disable, bool, 0);
module_param(rx_copybreak, int, 0);
module_param(avoid_D3, bool, 0);
MODULE_PARM_DESC(debug, "VIA Rhine debug message flags");
+MODULE_PARM_DESC(bql_disable, "Disable Byte Queue Limits functionality (default: false)");
MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)");
@@ -1220,6 +1224,8 @@ static void alloc_tbufs(struct net_device* dev)
}
rp->tx_ring[i-1].next_desc = cpu_to_le32(rp->tx_ring_dma);
+ if (likely(bql_disable == false))
+ netdev_reset_queue(dev);
}
static void free_tbufs(struct net_device* dev)
@@ -1719,6 +1725,8 @@ static netdev_tx_t rhine_start_tx(struct sk_buff *skb,
/* lock eth irq */
wmb();
rp->tx_ring[entry].tx_status |= cpu_to_le32(DescOwn);
+ if (likely(bql_disable == false))
+ netdev_sent_queue(dev, skb->len);
wmb();
rp->cur_tx++;
@@ -1783,6 +1791,7 @@ static void rhine_tx(struct net_device *dev)
{
struct rhine_private *rp = netdev_priv(dev);
int txstatus = 0, entry = rp->dirty_tx % TX_RING_SIZE;
+ unsigned int pkts_compl = 0, bytes_compl = 0;
/* find and cleanup dirty tx descriptors */
while (rp->dirty_tx != rp->cur_tx) {
@@ -1830,10 +1839,18 @@ static void rhine_tx(struct net_device *dev)
rp->tx_skbuff[entry]->len,
PCI_DMA_TODEVICE);
}
+
+ bytes_compl += rp->tx_skbuff[entry]->len;
+ pkts_compl++;
dev_kfree_skb(rp->tx_skbuff[entry]);
+
rp->tx_skbuff[entry] = NULL;
entry = (++rp->dirty_tx) % TX_RING_SIZE;
}
+
+ if (likely(bql_disable == false))
+ netdev_completed_queue(dev, pkts_compl, bytes_compl);
+
if ((rp->cur_tx - rp->dirty_tx) < TX_QUEUE_LEN - 4)
netif_wake_queue(dev);
}
--
1.8.4.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox