* Re: [PATCH 0/2] tun: add the RFS support
From: Zhi Yong Wu @ 2014-01-13 13:29 UTC (permalink / raw)
To: Tom Herbert; +Cc: David Miller, Linux Netdev List, Eric Dumazet, Zhi Yong Wu
In-Reply-To: <CA+mtBx8b_D+JQaphS4LCbAVKRWE5Tz1-P_eVxJJdG-FbMdWPdw@mail.gmail.com>
On Wed, Jan 1, 2014 at 6:33 AM, Tom Herbert <therbert@google.com> wrote:
> Zhi,
HI, Tom
>
> Thanks for following up on these patches. It would still be nice to
> have performance numbers to show the impact. These will be helpful for
> the next task of integrating RFS into virtio-net.
I don't get why RFS need to be integrated into virtio-net since
virtio-net has supported mq. Can you give some clue? thanks.
>
> Tom
>
> On Tue, Dec 31, 2013 at 10:32 AM, David Miller <davem@davemloft.net> wrote:
>> From: Zhi Yong Wu <zwu.kernel@gmail.com>
>> Date: Sun, 22 Dec 2013 18:54:30 +0800
>>
>>> Since Tom Herbert's hash related patchset was modified and got merged,
>>> his pachset about adding support for RFS on tun flows also need to get
>>> adjusted accordingly. I tried to update them, and before i will start
>>> to do some perf tests, i hope to get one correct code base, so it's time
>>> to post them out now. Any constructive comments are welcome, thanks.
>>
>> Series applied to net-next, thanks.
--
Regards,
Zhi Yong Wu
^ permalink raw reply
* Re: [PATCH net-next v2 1/3] net: add skb_checksum_setup
From: Nicolas Dichtel @ 2014-01-13 13:40 UTC (permalink / raw)
To: Paul Durrant, netdev@vger.kernel.org, xen-devel@lists.xen.org
Cc: David Miller, Eric Dumazet, Veaceslav Falico, Alexander Duyck
In-Reply-To: <9AAE0902D5BC7E449B7C8E4E778ABCD0204A79@AMSPEX01CL01.citrite.net>
Le 13/01/2014 12:26, Paul Durrant a écrit :
>> -----Original Message-----
>> From: Paul Durrant [mailto:paul.durrant@citrix.com]
>> Sent: 09 January 2014 10:03
>> To: netdev@vger.kernel.org; xen-devel@lists.xen.org
>> Cc: Paul Durrant; David Miller; Eric Dumazet; Veaceslav Falico; Alexander
>> Duyck; Nicolas Dichtel
>> Subject: [PATCH net-next v2 1/3] net: add skb_checksum_setup
>>
>> This patch adds a function to set up the partial checksum offset for IP
>> packets (and optionally re-calculate the pseudo-header checksum) into the
>> core network code.
>> The implementation was previously private and duplicated between xen-
>> netback
>> and xen-netfront, however it is not xen-specific and is potentially useful
>> to any network driver.
>>
>> Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
>> Cc: David Miller <davem@davemloft.net>
>> Cc: Eric Dumazet <edumazet@google.com>
>> Cc: Veaceslav Falico <vfalico@redhat.com>
>> Cc: Alexander Duyck <alexander.h.duyck@intel.com>
>> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
>
> Ping?
Your patch is under review by David (see
http://patchwork.ozlabs.org/patch/308539/), please be patient ;-)
Nicolas
^ permalink raw reply
* Re: build_skb() and data corruption
From: Ben Hutchings @ 2014-01-13 13:42 UTC (permalink / raw)
To: Jonas Jensen
Cc: netdev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, alexander.h.duyck, Arnd Bergmann,
Florian Fainelli
In-Reply-To: <CACmBeS35RAEQ+t2vtYtFTKNT-VdQw20hURjTi193Jk8HG7UECA@mail.gmail.com>
On Mon, 2014-01-13 at 12:47 +0100, Jonas Jensen wrote:
> Please help,
>
> I think I see memory corruption with a driver recently added to linux-next.
>
> The following error occur downloading a large file with wget (or
> ncftp): "read error: Bad address"
> wget exits and leaves the file unfinished.
>
> The error goes away when build_skb() is patched out, in this case by
> allocating pages directly in RX loop.
The problem is you're assuming build_skb() does rather more than it
does.
> I currently have two branches with code placed under ifdef USE_BUILD_SKB:
> https://bitbucket.org/Kasreyn/linux-next/src/faa7c408a655fdfd7c383f79259031da5a05d61e/drivers/net/ethernet/moxa/moxart_ether.c#cl-472
Quoting from there:
> #define USE_BUILD_SKB
> #ifdef USE_BUILD_SKB
>
>
> skb = build_skb(page_address(priv->rx_pages[priv->rx_head]), priv->rx_buf_size);
>
>
> if (unlikely(!skb)) {
> net_info_ratelimited("RX build_skb failed\n");
Don't log; increment the rx_dropped counter.
> moxart_rx_drop_packet(ndev, desc0);
> return true;
> }
>
>
> if (likely(skb))
Redundant condition.
> get_page(priv->rx_pages[priv->rx_head]);
>
>
> skb_put(skb, len);
>
>
> #else
>
>
> dma_unmap_page(&ndev->dev, priv->rx_buf_phys[priv->rx_head], RX_BUF_SIZE, DMA_FROM_DEVICE);
dma_unmap_page() is always needed, so move this above the #ifdef
USE_BUILD_SKB.
>
> skb = netdev_alloc_skb_ip_align(ndev, 128);
Missing check for NULL.
> skb_fill_page_desc(skb, 0, priv->rx_pages[priv->rx_head], 0, len);
> skb->len += len;
> skb->data_len += len;
>
>
> if (len > 128) {
> skb->truesize += PAGE_SIZE;
> __pskb_pull_tail(skb, ETH_HLEN);
> } else {
> __pskb_pull_tail(skb, len);
> }
>
>
> p = priv->rx_pages[priv->rx_head];
Missing check for NULL.
> moxart_alloc_rx_page(ndev, priv->rx_head);
New buffer is always required, so move this under the #endif... well,
except that if moxart_alloc_rx_page() fails then things go horribly
wrong as you have.
Best practice is to try allocating the next buffer before passing up the
current one; if that fails then you recycle the current buffer and
increment rx_dropped.
>
>
> #endif
[end quoted code]
> If build_skb() is the cause, is there something the driver can do about it?
>
> A quick search on "build_skb memory corruption" reveals the following
> commit, "igb: Revert support for build_skb in igb"
> f9d40f6a9921cc7d9385f64362314054e22152bd:
[...]
The problem I identified in igb occurs only when splitting a page into
multiple buffers (or when recycling DMA-mapped pages). build_skb() is
fine to use whenever each RX buffer is a single page (except that that's
memory-inefficient) that's unmapped on completion.
Ben.
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
^ permalink raw reply
* Re: [PATCH v5] can: add Renesas R-Car CAN driver
From: Sergei Shtylyov @ 2014-01-13 13:46 UTC (permalink / raw)
To: netdev, wg, mkl, linux-can; +Cc: linux-sh, vksavl
In-Reply-To: <201312270037.15822.sergei.shtylyov@cogentembedded.com>
Hello.
On 27-12-2013 1:37, Sergei Shtylyov wrote:
> Add support for the CAN controller found in Renesas R-Car SoCs.
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> ---
> The patch is against the 'linux-can-next.git' repo.
> Changes in version 5:
> - removed the code specific to the mailbox mode handling and added the code
> for the FIFO mode, dropping support for CAN_CTRLMODE_ONE_SHOT;
> - stop accumulating errors in the byte 1 of an error frame;
> - added #define RCAR_CAN_CTLR_CANM for CTLR.CANM field, added 'CANM_' infix to
> all its values;
> - replaced ~RCAR_CAN_CTLR_CANM_FORCE_RESET with ~RCAR_CAN_CTLR_CANM;
> - added polling for the CAN reset status bit when going from/to CAN reset.
Wolfgang, Marc, there has been no feedback from you on the last version,
working in FIFO mode. Ping!
WBR, Sergei
^ permalink raw reply
* [PATCH] sctp: remove a redundant NULL check
From: Dan Carpenter @ 2014-01-13 13:46 UTC (permalink / raw)
To: Vlad Yasevich
Cc: Neil Horman, David S. Miller, linux-sctp, netdev, kernel-janitors
It confuses Smatch when we check "sinit" for NULL and then non-NULL and
that causes a false positive warning later.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index d32dae78a486..27f1717170c2 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -1743,7 +1743,7 @@ static int sctp_sendmsg(struct kiocb *iocb, struct sock *sk,
* either the default or the user specified stream counts.
*/
if (sinfo) {
- if (!sinit || (sinit && !sinit->sinit_num_ostreams)) {
+ if (!sinit || !sinit->sinit_num_ostreams) {
/* Check against the defaults. */
if (sinfo->sinfo_stream >=
sp->initmsg.sinit_num_ostreams) {
^ permalink raw reply related
* randconfig build error with next-20140113, in net/netfilter/nft_reject.c
From: Jim Davis @ 2014-01-13 13:51 UTC (permalink / raw)
To: Stephen Rothwell, linux-next, linux-kernel, pablo,
Patrick McHardy, kadlec, David S. Miller, netfilter-devel,
netfilter, coreteam, netdev
[-- Attachment #1: Type: text/plain, Size: 638 bytes --]
Building with the attached random configuration file,
warning: (NF_TABLES_INET) selects NF_TABLES_IPV6 which has unmet
direct dependencies (NET && INET && IPV6 && NETFILTER && NF_TABLES)
warning: (NF_TABLES_INET) selects NF_TABLES_IPV6 which has unmet
direct dependencies (NET && INET && IPV6 && NETFILTER && NF_TABLES)
LD init/built-in.o
net/built-in.o: In function `nft_reject_eval':
nft_reject.c:(.text+0x67bc1): undefined reference to `nf_ip6_checksum'
nft_reject.c:(.text+0x67c28): undefined reference to `ip6_route_output'
nft_reject.c:(.text+0x67d09): undefined reference to `ip6_dst_hoplimit'
make: *** [vmlinux] Error 1
[-- Attachment #2: randconfig-1389610936.txt --]
[-- Type: text/plain, Size: 87074 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 3.13.0-rc8 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_COMPILE_TEST=y
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_FHANDLE=y
# CONFIG_AUDIT is not set
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
# CONFIG_TASK_XACCT is not set
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_STALL_COMMON is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y
# CONFIG_CGROUPS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_NAMESPACES is not set
CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
CONFIG_RD_LZMA=y
# CONFIG_RD_XZ is not set
CONFIG_RD_LZO=y
# CONFIG_RD_LZ4 is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
# CONFIG_BUG is not set
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_JUMP_LABEL=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
# CONFIG_SMP is not set
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
CONFIG_X86_INTEL_LPSS=y
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
# CONFIG_HYPERVISOR_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_CALGARY_IOMMU=y
# CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=1
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
CONFIG_I8K=y
# CONFIG_MICROCODE is not set
# CONFIG_MICROCODE_INTEL_EARLY is not set
# CONFIG_MICROCODE_AMD_EARLY is not set
# CONFIG_X86_MSR is not set
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
# CONFIG_ARCH_MEMORY_PROBE is not set
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTREMOVE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_NEED_PER_CPU_KM=y
CONFIG_CLEANCACHE=y
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
# CONFIG_X86_PAT is not set
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
CONFIG_PM_AUTOSLEEP=y
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
# CONFIG_PM_WAKELOCKS_GC is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_TEST_SUSPEND=y
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_EC_DEBUGFS=y
CONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_HOTPLUG_MEMORY=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
# CONFIG_ACPI_APEI is not set
CONFIG_ACPI_EXTLOG=y
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_CPU_IDLE_GOV_MENU is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_CNB20LE_QUIRK=y
CONFIG_PCIEPORTBUS=y
# CONFIG_PCIEAER is not set
# CONFIG_PCIEASPM is not set
CONFIG_PCIE_PME=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=y
# CONFIG_HT_IRQ is not set
CONFIG_PCI_ATS=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
# CONFIG_PCI_IOAPIC is not set
CONFIG_PCI_LABEL=y
#
# PCI host controller drivers
#
# CONFIG_ISA_DMA_API is not set
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
# CONFIG_YENTA_TOSHIBA is not set
CONFIG_PD6729=y
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_TSI721=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
CONFIG_RAPIDIO_DMA_ENGINE=y
# CONFIG_RAPIDIO_DEBUG is not set
CONFIG_RAPIDIO_ENUM_BASIC=y
#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_TSI57X=y
CONFIG_RAPIDIO_CPS_XX=y
# CONFIG_RAPIDIO_TSI568 is not set
# CONFIG_RAPIDIO_CPS_GEN2 is not set
CONFIG_X86_SYSFB=y
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_BINFMT_SCRIPT is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_COREDUMP is not set
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_KEYS_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=y
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=y
CONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set
# CONFIG_IP_PIMSM_V2 is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CT_NETLINK=y
CONFIG_NF_TABLES=y
CONFIG_NF_TABLES_INET=y
CONFIG_NFT_EXTHDR=y
# CONFIG_NFT_META is not set
# CONFIG_NFT_CT is not set
CONFIG_NFT_RBTREE=y
# CONFIG_NFT_HASH is not set
CONFIG_NFT_COUNTER=y
# CONFIG_NFT_LOG is not set
# CONFIG_NFT_LIMIT is not set
CONFIG_NFT_REJECT=y
CONFIG_NFT_COMPAT=y
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_LOG=y
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_IP_SET is not set
CONFIG_IP_VS=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
# CONFIG_IP_VS_PROTO_TCP is not set
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
# CONFIG_IP_VS_PROTO_AH is not set
CONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_LBLC=y
# CONFIG_IP_VS_LBLCR is not set
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
# CONFIG_IP_VS_SED is not set
# CONFIG_IP_VS_NQ is not set
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
CONFIG_IP_VS_NFCT=y
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_NF_TABLES_IPV4=y
# CONFIG_NFT_CHAIN_ROUTE_IPV4 is not set
CONFIG_NF_TABLES_ARP=y
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_NF_TABLES_IPV6=y
CONFIG_NF_TABLES_BRIDGE=y
CONFIG_BRIDGE_NF_EBTABLES=y
CONFIG_BRIDGE_EBT_BROUTE=y
CONFIG_BRIDGE_EBT_T_FILTER=y
CONFIG_BRIDGE_EBT_T_NAT=y
# CONFIG_BRIDGE_EBT_802_3 is not set
CONFIG_BRIDGE_EBT_AMONG=y
CONFIG_BRIDGE_EBT_ARP=y
CONFIG_BRIDGE_EBT_IP=y
CONFIG_BRIDGE_EBT_LIMIT=y
# CONFIG_BRIDGE_EBT_MARK is not set
CONFIG_BRIDGE_EBT_PKTTYPE=y
# CONFIG_BRIDGE_EBT_STP is not set
CONFIG_BRIDGE_EBT_VLAN=y
CONFIG_BRIDGE_EBT_ARPREPLY=y
CONFIG_BRIDGE_EBT_DNAT=y
CONFIG_BRIDGE_EBT_MARK_T=y
# CONFIG_BRIDGE_EBT_REDIRECT is not set
CONFIG_BRIDGE_EBT_SNAT=y
CONFIG_BRIDGE_EBT_LOG=y
CONFIG_BRIDGE_EBT_ULOG=y
CONFIG_BRIDGE_EBT_NFLOG=y
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_OBJCNT=y
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_RDS=y
CONFIG_RDS_TCP=y
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=y
CONFIG_TIPC_PORTS=8191
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
# CONFIG_ATM_LANE is not set
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=y
# CONFIG_L2TP_DEBUGFS is not set
# CONFIG_L2TP_V3 is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_BRIDGE_IGMP_SNOOPING is not set
# CONFIG_BRIDGE_VLAN_FILTERING is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_DECNET=y
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
CONFIG_X25=y
# CONFIG_LAPB is not set
CONFIG_PHONET=y
CONFIG_IEEE802154=y
CONFIG_MAC802154=y
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=y
# CONFIG_NET_SCH_RED is not set
CONFIG_NET_SCH_SFB=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_MQPRIO=y
CONFIG_NET_SCH_CHOKE=y
# CONFIG_NET_SCH_QFQ is not set
CONFIG_NET_SCH_CODEL=y
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_FQ=y
CONFIG_NET_SCH_HHF=y
CONFIG_NET_SCH_PIE=y
CONFIG_NET_SCH_INGRESS=y
# CONFIG_NET_SCH_PLUG is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_CLS_BPF=y
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
# CONFIG_GACT_PROB is not set
# CONFIG_NET_ACT_MIRRED is not set
CONFIG_NET_ACT_NAT=y
CONFIG_NET_ACT_PEDIT=y
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_ACT_SKBEDIT=y
CONFIG_NET_ACT_CSUM=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
# CONFIG_BATMAN_ADV_BLA is not set
# CONFIG_BATMAN_ADV_DAT is not set
# CONFIG_BATMAN_ADV_NC is not set
CONFIG_BATMAN_ADV_DEBUG=y
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
CONFIG_NET_MPLS_GSO=y
# CONFIG_HSR is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
#
# Network testing
#
CONFIG_NET_PKTGEN=y
CONFIG_NET_DROP_MONITOR=y
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=y
CONFIG_ROSE=y
#
# AX.25 network device drivers
#
CONFIG_MKISS=y
CONFIG_6PACK=y
CONFIG_BPQETHER=y
CONFIG_BAYCOM_SER_FDX=y
CONFIG_BAYCOM_SER_HDX=y
CONFIG_BAYCOM_PAR=y
CONFIG_YAM=y
# CONFIG_CAN is not set
CONFIG_IRDA=y
#
# IrDA protocols
#
CONFIG_IRLAN=y
CONFIG_IRCOMM=y
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=y
#
# Dongle support
#
CONFIG_DONGLE=y
# CONFIG_ESI_DONGLE is not set
CONFIG_ACTISYS_DONGLE=y
CONFIG_TEKRAM_DONGLE=y
CONFIG_TOIM3232_DONGLE=y
CONFIG_LITELINK_DONGLE=y
CONFIG_MA600_DONGLE=y
CONFIG_GIRBIL_DONGLE=y
# CONFIG_MCP2120_DONGLE is not set
CONFIG_OLD_BELKIN_DONGLE=y
CONFIG_ACT200L_DONGLE=y
#
# FIR device drivers
#
# CONFIG_VLSI_FIR is not set
CONFIG_BT=y
CONFIG_BT_RFCOMM=y
# CONFIG_BT_RFCOMM_TTY is not set
# CONFIG_BT_BNEP is not set
CONFIG_BT_HIDP=y
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUART=y
CONFIG_BT_HCIUART_H4=y
# CONFIG_BT_HCIUART_BCSP is not set
CONFIG_BT_HCIUART_ATH3K=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIUART_3WIRE=y
CONFIG_BT_HCIDTL1=y
CONFIG_BT_HCIBT3C=y
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
CONFIG_BT_HCIVHCI=y
# CONFIG_BT_MRVL is not set
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_DEBUG=y
CONFIG_RXKAD=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
# CONFIG_RFKILL_INPUT is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
CONFIG_NFC=y
# CONFIG_NFC_DIGITAL is not set
# CONFIG_NFC_NCI is not set
# CONFIG_NFC_HCI is not set
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_SIM=y
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
#
# Bus devices
#
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_AD525X_DPOT_SPI=y
CONFIG_ATMEL_PWM=y
# CONFIG_DUMMY_IRQ is not set
CONFIG_IBM_ASM=y
CONFIG_PHANTOM=y
CONFIG_INTEL_MID_PTI=y
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
CONFIG_ATMEL_SSC=y
CONFIG_ENCLOSURE_SERVICES=y
CONFIG_HP_ILO=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=y
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
CONFIG_DS1682=y
CONFIG_TI_DAC7512=y
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
CONFIG_PCH_PHUB=y
CONFIG_USB_SWITCH_FSA9480=y
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
CONFIG_C2PORT=y
# CONFIG_C2PORT_DURAMAR_2150 is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
CONFIG_SENSORS_LIS3_I2C=y
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=y
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
CONFIG_VMWARE_VMCI=y
#
# Intel MIC Host Driver
#
CONFIG_INTEL_MIC_HOST=y
#
# Intel MIC Card Driver
#
CONFIG_INTEL_MIC_CARD=y
# CONFIG_GENWQE is not set
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=y
CONFIG_FIREWIRE_OHCI=y
CONFIG_FIREWIRE_NET=y
CONFIG_FIREWIRE_NOSY=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
# CONFIG_NETDEVICES is not set
CONFIG_VHOST_RING=y
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5520=y
CONFIG_KEYBOARD_ADP5588=y
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_QT2160=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_LM8323=y
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
CONFIG_KEYBOARD_MCS=y
CONFIG_KEYBOARD_MPR121=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
# CONFIG_KEYBOARD_SAMSUNG is not set
CONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_CROS_EC=y
# CONFIG_INPUT_LEDS is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_SERIAL=y
CONFIG_MOUSE_CYAPA=y
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_SYNAPTICS_I2C=y
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=y
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
CONFIG_TOUCHSCREEN_BU21013=y
CONFIG_TOUCHSCREEN_CYTTSP_CORE=y
# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set
CONFIG_TOUCHSCREEN_CYTTSP_SPI=y
CONFIG_TOUCHSCREEN_CYTTSP4_CORE=y
# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_SPI is not set
CONFIG_TOUCHSCREEN_DA9052=y
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
CONFIG_TOUCHSCREEN_EETI=y
CONFIG_TOUCHSCREEN_FUJITSU=y
# CONFIG_TOUCHSCREEN_ILI210X is not set
CONFIG_TOUCHSCREEN_GUNZE=y
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
# CONFIG_TOUCHSCREEN_MAX11801 is not set
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WM831X=y
# CONFIG_TOUCHSCREEN_WM97XX is not set
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC_SERIO=y
# CONFIG_TOUCHSCREEN_TSC2005 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_TOUCHSCREEN_W90X900=y
# CONFIG_TOUCHSCREEN_PCAP is not set
# CONFIG_TOUCHSCREEN_ST1232 is not set
CONFIG_TOUCHSCREEN_TPS6507X=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_88PM860X_ONKEY=y
CONFIG_INPUT_AD714X=y
CONFIG_INPUT_AD714X_I2C=y
CONFIG_INPUT_AD714X_SPI=y
# CONFIG_INPUT_ARIZONA_HAPTICS is not set
# CONFIG_INPUT_BMA150 is not set
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_MAX8925_ONKEY is not set
CONFIG_INPUT_MC13783_PWRBUTTON=y
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_MPU3050=y
CONFIG_INPUT_APANEL=y
CONFIG_INPUT_ATLAS_BTNS=y
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_RETU_PWRBUTTON=y
CONFIG_INPUT_TWL6040_VIBRA=y
CONFIG_INPUT_UINPUT=y
CONFIG_INPUT_PCF8574=y
# CONFIG_INPUT_DA9052_ONKEY is not set
CONFIG_INPUT_DA9055_ONKEY=y
CONFIG_INPUT_WM831X_ON=y
CONFIG_INPUT_PCAP=y
# CONFIG_INPUT_ADXL34X is not set
CONFIG_INPUT_CMA3000=y
CONFIG_INPUT_CMA3000_I2C=y
CONFIG_INPUT_IDEAPAD_SLIDEBAR=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
CONFIG_SERIO_PARKBD=y
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
CONFIG_SERIO_PS2MULT=y
CONFIG_SERIO_ARC_PS2=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
CONFIG_GAMEPORT_L4=y
# CONFIG_GAMEPORT_EMU10K1 is not set
CONFIG_GAMEPORT_FM801=y
#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=y
# CONFIG_CYCLADES is not set
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
CONFIG_SYNCLINKMP=y
CONFIG_SYNCLINK_GT=y
# CONFIG_NOZOMI is not set
CONFIG_ISI=y
CONFIG_N_HDLC=y
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_8250_DW=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_CLPS711X is not set
CONFIG_SERIAL_MAX3100=y
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_MRST_MAX3110 is not set
CONFIG_SERIAL_MFD_HSU=y
# CONFIG_SERIAL_MFD_HSU_CONSOLE is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=2
# CONFIG_SERIAL_SH_SCI_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SCCNXP=y
CONFIG_SERIAL_SCCNXP_CONSOLE=y
CONFIG_SERIAL_TIMBERDALE=y
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
CONFIG_SERIAL_PCH_UART=y
CONFIG_SERIAL_PCH_UART_CONSOLE=y
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
CONFIG_SERIAL_ST_ASC=y
# CONFIG_SERIAL_ST_ASC_CONSOLE is not set
CONFIG_TTY_PRINTK=y
# CONFIG_PRINTER is not set
CONFIG_PPDEV=y
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
# CONFIG_IPMI_POWEROFF is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_ATMEL=y
CONFIG_HW_RANDOM_VIA=y
# CONFIG_HW_RANDOM_VIRTIO is not set
# CONFIG_HW_RANDOM_EXYNOS is not set
CONFIG_NVRAM=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=y
CONFIG_CARDMAN_4000=y
# CONFIG_CARDMAN_4040 is not set
CONFIG_MWAVE=y
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HPET_MMAP_DEFAULT=y
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_PCA9541=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_I2C_MUX_PINCTRL=y
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD756_S4882=y
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NFORCE2_S4985=y
# CONFIG_I2C_SIS5595 is not set
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y
#
# ACPI drivers
#
CONFIG_I2C_SCMI=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
CONFIG_I2C_EG20T=y
CONFIG_I2C_KEMPLD=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set
CONFIG_I2C_RIIC=y
CONFIG_I2C_SH_MOBILE=y
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y
CONFIG_I2C_RCAR=y
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_TAOS_EVM=y
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_ATMEL=y
CONFIG_SPI_BCM2835=y
CONFIG_SPI_BCM63XX_HSSPI=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
# CONFIG_SPI_EP93XX is not set
CONFIG_SPI_IMX=y
# CONFIG_SPI_LM70_LLP is not set
CONFIG_SPI_FSL_DSPI=y
CONFIG_SPI_TI_QSPI=y
CONFIG_SPI_OMAP_100K=y
CONFIG_SPI_ORION=y
CONFIG_SPI_PXA2XX_DMA=y
CONFIG_SPI_PXA2XX=y
CONFIG_SPI_PXA2XX_PCI=y
# CONFIG_SPI_SC18IS602 is not set
CONFIG_SPI_SH_MSIOF=y
CONFIG_SPI_SH=y
# CONFIG_SPI_SH_HSPI is not set
# CONFIG_SPI_TEGRA114 is not set
# CONFIG_SPI_TEGRA20_SFLASH is not set
CONFIG_SPI_TEGRA20_SLINK=y
CONFIG_SPI_TOPCLIFF_PCH=y
# CONFIG_SPI_XCOMM is not set
CONFIG_SPI_XILINX=y
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_PCI=y
CONFIG_SPI_DW_MID_DMA=y
CONFIG_SPI_DW_MMIO=y
#
# SPI Protocol Masters
#
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_HSI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_PINCTRL=y
#
# Pin controllers
#
# CONFIG_PINMUX is not set
# CONFIG_PINCONF is not set
# CONFIG_DEBUG_PINCTRL is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=y
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2482=y
# CONFIG_W1_MASTER_DS1WM is not set
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2413 is not set
CONFIG_W1_SLAVE_DS2423=y
CONFIG_W1_SLAVE_DS2431=y
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=y
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
# CONFIG_W1_SLAVE_DS28E04 is not set
CONFIG_W1_SLAVE_BQ27000=y
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
CONFIG_GENERIC_ADC_BATTERY=y
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=y
CONFIG_WM831X_POWER=y
# CONFIG_TEST_POWER is not set
CONFIG_BATTERY_88PM860X=y
# CONFIG_BATTERY_DS2760 is not set
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=y
CONFIG_BATTERY_DS2782=y
CONFIG_BATTERY_SBS=y
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_BATTERY_DA9052=y
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=y
CONFIG_CHARGER_88PM860X=y
CONFIG_CHARGER_MAX8903=y
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_SMB347=y
# CONFIG_CHARGER_TPS65090 is not set
# CONFIG_BATTERY_GOLDFISH is not set
CONFIG_POWER_RESET=y
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=y
CONFIG_SENSORS_ABITUGURU3=y
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=y
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADCXX=y
CONFIG_SENSORS_ADM1021=y
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=y
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7310=y
CONFIG_SENSORS_ADT7410=y
CONFIG_SENSORS_ADT7411=y
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_K8TEMP=y
CONFIG_SENSORS_K10TEMP=y
CONFIG_SENSORS_FAM15H_POWER=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ATXP1=y
CONFIG_SENSORS_DS620=y
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DA9052_ADC is not set
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
CONFIG_SENSORS_FSCHMD=y
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_G762=y
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_HTU21=y
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IBMAEM=y
CONFIG_SENSORS_IBMPEX=y
CONFIG_SENSORS_IIO_HWMON=y
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LTC4261=y
CONFIG_SENSORS_LM95234=y
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
CONFIG_SENSORS_MAX1111=y
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=y
CONFIG_SENSORS_MAX1668=y
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX6639=y
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
CONFIG_SENSORS_MCP3021=y
CONFIG_SENSORS_NCT6775=y
CONFIG_SENSORS_PC87360=y
CONFIG_SENSORS_PC87427=y
CONFIG_SENSORS_PCF8591=y
CONFIG_PMBUS=y
# CONFIG_SENSORS_PMBUS is not set
CONFIG_SENSORS_ADM1275=y
# CONFIG_SENSORS_LM25066 is not set
# CONFIG_SENSORS_LTC2978 is not set
# CONFIG_SENSORS_MAX16064 is not set
CONFIG_SENSORS_MAX34440=y
CONFIG_SENSORS_MAX8688=y
# CONFIG_SENSORS_UCD9000 is not set
CONFIG_SENSORS_UCD9200=y
CONFIG_SENSORS_ZL6100=y
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
CONFIG_SENSORS_DME1737=y
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
# CONFIG_SENSORS_EMC6W201 is not set
CONFIG_SENSORS_SMSC47M1=y
CONFIG_SENSORS_SMSC47M192=y
CONFIG_SENSORS_SMSC47B397=y
CONFIG_SENSORS_SCH56XX_COMMON=y
CONFIG_SENSORS_SCH5627=y
CONFIG_SENSORS_SCH5636=y
CONFIG_SENSORS_ADS1015=y
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_ADS7871=y
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_INA209=y
CONFIG_SENSORS_INA2XX=y
CONFIG_SENSORS_THMC50=y
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_VIA_CPUTEMP=y
# CONFIG_SENSORS_VIA686A is not set
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
CONFIG_SENSORS_W83791D=y
CONFIG_SENSORS_W83792D=y
CONFIG_SENSORS_W83793=y
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_WM831X is not set
# CONFIG_SENSORS_APPLESMC is not set
CONFIG_SENSORS_MC13783_ADC=y
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
CONFIG_SENSORS_ATK0110=y
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_EMULATION=y
# CONFIG_RCAR_THERMAL is not set
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_X86_PKG_TEMP_THERMAL=y
CONFIG_ACPI_INT3403_THERMAL=y
#
# Texas Instruments thermal drivers
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_DA9052_WATCHDOG is not set
# CONFIG_DA9055_WATCHDOG is not set
# CONFIG_WM831X_WATCHDOG is not set
CONFIG_RETU_WATCHDOG=y
CONFIG_ACQUIRE_WDT=y
CONFIG_ADVANTECH_WDT=y
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
CONFIG_SP5100_TCO=y
CONFIG_SC520_WDT=y
# CONFIG_SBC_FITPC2_WATCHDOG is not set
CONFIG_EUROTECH_WDT=y
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=y
CONFIG_WAFER_WDT=y
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=y
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
CONFIG_IT87_WDT=y
CONFIG_HP_WATCHDOG=y
CONFIG_KEMPLD_WDT=y
CONFIG_HPWDT_NMI_DECODING=y
CONFIG_SC1200_WDT=y
CONFIG_PC87413_WDT=y
# CONFIG_NV_TCO is not set
CONFIG_60XX_WDT=y
# CONFIG_SBC8360_WDT is not set
CONFIG_CPU5_WDT=y
CONFIG_SMSC_SCH311X_WDT=y
CONFIG_SMSC37B787_WDT=y
CONFIG_VIA_WDT=y
# CONFIG_W83627HF_WDT is not set
CONFIG_W83697HF_WDT=y
# CONFIG_W83697UG_WDT is not set
CONFIG_W83877F_WDT=y
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=y
CONFIG_WDTPCI=y
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_CS5535 is not set
CONFIG_MFD_AS3711=y
CONFIG_PMIC_ADP5520=y
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_I2C=y
# CONFIG_PMIC_DA903X is not set
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9063=y
CONFIG_MFD_MC13XXX=y
# CONFIG_MFD_MC13XXX_SPI is not set
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_HTC_PASIC3=y
CONFIG_LPC_ICH=y
CONFIG_LPC_SCH=y
# CONFIG_MFD_JANZ_CMODIO is not set
CONFIG_MFD_KEMPLD=y
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
CONFIG_MFD_88PM860X=y
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_MAX8925=y
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
CONFIG_EZX_PCAP=y
CONFIG_MFD_RETU=y
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
CONFIG_MFD_RTSX_PCI=y
CONFIG_MFD_RC5T583=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
CONFIG_ABX500_CORE=y
# CONFIG_AB3100_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_SYSCON is not set
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65090=y
CONFIG_MFD_TPS65217=y
# CONFIG_MFD_TPS6586X is not set
CONFIG_MFD_TPS80031=y
# CONFIG_TWL4030_CORE is not set
CONFIG_TWL6040_CORE=y
# CONFIG_MFD_WL1273_CORE is not set
CONFIG_MFD_LM3533=y
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_ARIZONA_SPI=y
# CONFIG_MFD_WM5102 is not set
CONFIG_MFD_WM5110=y
# CONFIG_MFD_WM8997 is not set
# CONFIG_MFD_WM8400 is not set
CONFIG_MFD_WM831X=y
CONFIG_MFD_WM831X_I2C=y
CONFIG_MFD_WM831X_SPI=y
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
# CONFIG_MEDIA_RADIO_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_ADV_DEBUG=y
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_TUNER=y
CONFIG_V4L2_MEM2MEM_DEV=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_SG=y
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEOBUF_DMA_CONTIG=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_DVB_CORE=y
CONFIG_DVB_NET=y
CONFIG_TTPCI_EEPROM=y
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
#
# Media drivers
#
CONFIG_RC_CORE=y
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
# CONFIG_LIRC is not set
CONFIG_IR_NEC_DECODER=y
# CONFIG_IR_RC5_DECODER is not set
# CONFIG_IR_RC6_DECODER is not set
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_RC5_SZ_DECODER=y
CONFIG_IR_SANYO_DECODER=y
# CONFIG_IR_MCE_KBD_DECODER is not set
# CONFIG_RC_DEVICES is not set
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=y
# CONFIG_VIDEO_IVTV_ALSA is not set
# CONFIG_VIDEO_FB_IVTV is not set
# CONFIG_VIDEO_ZORAN is not set
CONFIG_VIDEO_HEXIUM_GEMINI=y
CONFIG_VIDEO_HEXIUM_ORION=y
CONFIG_VIDEO_MXB=y
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX18=y
CONFIG_VIDEO_CX18_ALSA=y
# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_CX25821 is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_SAA7164 is not set
#
# Media digital TV PCI Adapters
#
CONFIG_DVB_AV7110=y
CONFIG_DVB_AV7110_OSD=y
# CONFIG_DVB_BUDGET_CORE is not set
CONFIG_DVB_B2C2_FLEXCOP_PCI=y
CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG=y
CONFIG_DVB_PLUTO2=y
CONFIG_DVB_DM1105=y
# CONFIG_DVB_PT1 is not set
# CONFIG_MANTIS_CORE is not set
CONFIG_DVB_NGENE=y
CONFIG_DVB_DDBRIDGE=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_CAFE_CCIC=y
CONFIG_VIDEO_SH_VOU=y
CONFIG_VIDEO_TIMBERDALE=y
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=y
# CONFIG_VIDEO_SH_VEU is not set
CONFIG_VIDEO_RENESAS_VSP1=y
# CONFIG_V4L_TEST_DRIVERS is not set
#
# Supported MMC/SDIO adapters
#
CONFIG_MEDIA_PARPORT_SUPPORT=y
CONFIG_VIDEO_BWQCAM=y
CONFIG_VIDEO_CQCAM=y
CONFIG_VIDEO_W9966=y
#
# Supported FireWire (IEEE 1394) Adapters
#
# CONFIG_DVB_FIREDTV is not set
CONFIG_VIDEO_CX2341X=y
CONFIG_VIDEO_TVEEPROM=y
CONFIG_DVB_B2C2_FLEXCOP=y
CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y
CONFIG_VIDEO_SAA7146=y
CONFIG_VIDEO_SAA7146_VV=y
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
# CONFIG_VIDEO_IR_I2C is not set
#
# Encoders, decoders, sensors and other helper chips
#
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=y
CONFIG_VIDEO_TDA7432=y
CONFIG_VIDEO_TDA9840=y
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_CS5345=y
CONFIG_VIDEO_CS53L32A=y
# CONFIG_VIDEO_TLV320AIC23B is not set
CONFIG_VIDEO_UDA1342=y
CONFIG_VIDEO_WM8775=y
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_VP27SMPX=y
# CONFIG_VIDEO_SONY_BTF_MPX is not set
#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set
#
# Video decoders
#
CONFIG_VIDEO_ADV7180=y
CONFIG_VIDEO_ADV7183=y
# CONFIG_VIDEO_ADV7604 is not set
CONFIG_VIDEO_ADV7842=y
# CONFIG_VIDEO_BT819 is not set
CONFIG_VIDEO_BT856=y
CONFIG_VIDEO_BT866=y
CONFIG_VIDEO_KS0127=y
CONFIG_VIDEO_ML86V7667=y
CONFIG_VIDEO_SAA7110=y
CONFIG_VIDEO_SAA711X=y
CONFIG_VIDEO_SAA7191=y
CONFIG_VIDEO_TVP514X=y
CONFIG_VIDEO_TVP5150=y
CONFIG_VIDEO_TVP7002=y
CONFIG_VIDEO_TW2804=y
# CONFIG_VIDEO_TW9903 is not set
# CONFIG_VIDEO_TW9906 is not set
# CONFIG_VIDEO_VPX3220 is not set
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=y
CONFIG_VIDEO_CX25840=y
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=y
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
CONFIG_VIDEO_ADV7343=y
CONFIG_VIDEO_ADV7393=y
CONFIG_VIDEO_ADV7511=y
CONFIG_VIDEO_AD9389B=y
# CONFIG_VIDEO_AK881X is not set
CONFIG_VIDEO_THS8200=y
#
# Camera sensor devices
#
CONFIG_VIDEO_APTINA_PLL=y
CONFIG_VIDEO_SMIAPP_PLL=y
CONFIG_VIDEO_OV7640=y
CONFIG_VIDEO_OV7670=y
CONFIG_VIDEO_OV9650=y
CONFIG_VIDEO_VS6624=y
CONFIG_VIDEO_MT9M032=y
CONFIG_VIDEO_MT9P031=y
CONFIG_VIDEO_MT9T001=y
CONFIG_VIDEO_MT9V011=y
CONFIG_VIDEO_MT9V032=y
CONFIG_VIDEO_SR030PC30=y
CONFIG_VIDEO_NOON010PC30=y
CONFIG_VIDEO_M5MOLS=y
CONFIG_VIDEO_S5K6AA=y
CONFIG_VIDEO_S5K4ECGX=y
# CONFIG_VIDEO_S5K5BAF is not set
CONFIG_VIDEO_SMIAPP=y
# CONFIG_VIDEO_S5C73M3 is not set
#
# Flash devices
#
CONFIG_VIDEO_ADP1653=y
CONFIG_VIDEO_AS3645A=y
# CONFIG_VIDEO_LM3560 is not set
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y
#
# Miscellaneous helper chips
#
CONFIG_VIDEO_THS7303=y
CONFIG_VIDEO_M52790=y
#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=y
#
# Customize TV tuners
#
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_MT2060=y
# CONFIG_MEDIA_TUNER_MT2063 is not set
CONFIG_MEDIA_TUNER_MT2266=y
# CONFIG_MEDIA_TUNER_MT2131 is not set
CONFIG_MEDIA_TUNER_QT1010=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
# CONFIG_MEDIA_TUNER_MXL5005S is not set
CONFIG_MEDIA_TUNER_MXL5007T=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_MEDIA_TUNER_MAX2165=y
# CONFIG_MEDIA_TUNER_TDA18218 is not set
# CONFIG_MEDIA_TUNER_FC0011 is not set
# CONFIG_MEDIA_TUNER_FC0012 is not set
# CONFIG_MEDIA_TUNER_FC0013 is not set
CONFIG_MEDIA_TUNER_TDA18212=y
CONFIG_MEDIA_TUNER_E4000=y
CONFIG_MEDIA_TUNER_FC2580=y
# CONFIG_MEDIA_TUNER_M88TS2022 is not set
CONFIG_MEDIA_TUNER_TUA9001=y
CONFIG_MEDIA_TUNER_IT913X=y
CONFIG_MEDIA_TUNER_R820T=y
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
CONFIG_DVB_STB0899=y
CONFIG_DVB_STB6100=y
# CONFIG_DVB_STV090x is not set
CONFIG_DVB_STV6110x=y
CONFIG_DVB_M88DS3103=y
#
# Multistandard (cable + terrestrial) frontends
#
CONFIG_DVB_DRXK=y
CONFIG_DVB_TDA18271C2DD=y
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
CONFIG_DVB_MT312=y
# CONFIG_DVB_ZL10036 is not set
CONFIG_DVB_ZL10039=y
CONFIG_DVB_S5H1420=y
# CONFIG_DVB_STV0288 is not set
CONFIG_DVB_STB6000=y
CONFIG_DVB_STV0299=y
CONFIG_DVB_STV6110=y
CONFIG_DVB_STV0900=y
# CONFIG_DVB_TDA8083 is not set
CONFIG_DVB_TDA10086=y
CONFIG_DVB_TDA8261=y
# CONFIG_DVB_VES1X93 is not set
CONFIG_DVB_TUNER_ITD1000=y
CONFIG_DVB_TUNER_CX24113=y
# CONFIG_DVB_TDA826X is not set
CONFIG_DVB_TUA6100=y
CONFIG_DVB_CX24116=y
CONFIG_DVB_CX24117=y
CONFIG_DVB_SI21XX=y
# CONFIG_DVB_TS2020 is not set
CONFIG_DVB_DS3000=y
# CONFIG_DVB_MB86A16 is not set
# CONFIG_DVB_TDA10071 is not set
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
CONFIG_DVB_SP887X=y
CONFIG_DVB_CX22700=y
CONFIG_DVB_CX22702=y
# CONFIG_DVB_S5H1432 is not set
CONFIG_DVB_DRXD=y
# CONFIG_DVB_L64781 is not set
CONFIG_DVB_TDA1004X=y
CONFIG_DVB_NXT6000=y
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
CONFIG_DVB_DIB3000MB=y
CONFIG_DVB_DIB3000MC=y
CONFIG_DVB_DIB7000M=y
CONFIG_DVB_DIB7000P=y
CONFIG_DVB_DIB9000=y
CONFIG_DVB_TDA10048=y
CONFIG_DVB_AF9013=y
CONFIG_DVB_EC100=y
CONFIG_DVB_HD29L2=y
# CONFIG_DVB_STV0367 is not set
# CONFIG_DVB_CXD2820R is not set
CONFIG_DVB_RTL2830=y
CONFIG_DVB_RTL2832=y
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=y
CONFIG_DVB_TDA10021=y
CONFIG_DVB_TDA10023=y
# CONFIG_DVB_STV0297 is not set
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
CONFIG_DVB_OR51211=y
CONFIG_DVB_OR51132=y
CONFIG_DVB_BCM3510=y
CONFIG_DVB_LGDT330X=y
CONFIG_DVB_LGDT3305=y
CONFIG_DVB_LG2160=y
CONFIG_DVB_S5H1409=y
CONFIG_DVB_AU8522=y
CONFIG_DVB_AU8522_DTV=y
# CONFIG_DVB_AU8522_V4L is not set
CONFIG_DVB_S5H1411=y
#
# ISDB-T (terrestrial) frontends
#
CONFIG_DVB_S921=y
CONFIG_DVB_DIB8000=y
CONFIG_DVB_MB86A20S=y
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=y
CONFIG_DVB_TUNER_DIB0070=y
# CONFIG_DVB_TUNER_DIB0090 is not set
#
# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
CONFIG_DVB_LNBP22=y
CONFIG_DVB_ISL6405=y
CONFIG_DVB_ISL6421=y
CONFIG_DVB_ISL6423=y
CONFIG_DVB_A8293=y
CONFIG_DVB_LGS8GL5=y
# CONFIG_DVB_LGS8GXX is not set
CONFIG_DVB_ATBM8830=y
CONFIG_DVB_TDA665x=y
CONFIG_DVB_IX2505V=y
# CONFIG_DVB_IT913X_FE is not set
CONFIG_DVB_M88RS2000=y
# CONFIG_DVB_AF9033 is not set
#
# Tools to develop new frontends
#
CONFIG_DVB_DUMMY_FE=y
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
# CONFIG_DRM_I2C_SIL164 is not set
CONFIG_DRM_I2C_NXP_TDA998X=y
CONFIG_DRM_TDFX=y
CONFIG_DRM_R128=y
CONFIG_DRM_RADEON=y
# CONFIG_DRM_RADEON_UMS is not set
CONFIG_DRM_NOUVEAU=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_I810=y
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=y
CONFIG_DRM_I915_FBDEV=y
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
# CONFIG_DRM_I915_UMS is not set
CONFIG_DRM_MGA=y
# CONFIG_DRM_SIS is not set
CONFIG_DRM_VIA=y
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
CONFIG_DRM_AST=y
CONFIG_DRM_MGAG200=y
CONFIG_DRM_CIRRUS_QEMU=y
CONFIG_DRM_QXL=y
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_HDMI=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=y
CONFIG_FB_SVGALIB=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=y
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=y
# CONFIG_FB_CYBER2000_DDC is not set
CONFIG_FB_ARC=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
CONFIG_FB_N411=y
CONFIG_FB_HGA=y
CONFIG_FB_S1D13XXX=y
CONFIG_FB_NVIDIA=y
# CONFIG_FB_NVIDIA_I2C is not set
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
CONFIG_FB_I740=y
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not set
# CONFIG_FB_MATROX_MYSTIQUE is not set
# CONFIG_FB_MATROX_G is not set
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_RADEON=y
# CONFIG_FB_RADEON_I2C is not set
# CONFIG_FB_RADEON_BACKLIGHT is not set
CONFIG_FB_RADEON_DEBUG=y
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=y
# CONFIG_FB_S3_DDC is not set
CONFIG_FB_SAVAGE=y
# CONFIG_FB_SAVAGE_I2C is not set
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=y
# CONFIG_FB_SIS_300 is not set
# CONFIG_FB_SIS_315 is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_ARK=y
# CONFIG_FB_PM3 is not set
CONFIG_FB_CARMINE=y
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
# CONFIG_FB_GEODE is not set
CONFIG_FB_SH_MOBILE_LCDC=y
CONFIG_FB_SH_MOBILE_HDMI=y
# CONFIG_FB_TMIO is not set
# CONFIG_FB_GOLDFISH is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=y
CONFIG_FB_MB862XX_PCI_GDC=y
# CONFIG_FB_MB862XX_I2C is not set
CONFIG_FB_BROADSHEET=y
CONFIG_FB_AUO_K190X=y
CONFIG_FB_AUO_K1900=y
CONFIG_FB_AUO_K1901=y
# CONFIG_FB_SIMPLE is not set
CONFIG_EXYNOS_VIDEO=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_ATMEL_PWM is not set
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_LM3533 is not set
# CONFIG_BACKLIGHT_PWM is not set
# CONFIG_BACKLIGHT_DA9052 is not set
CONFIG_BACKLIGHT_MAX8925=y
CONFIG_BACKLIGHT_APPLE=y
CONFIG_BACKLIGHT_SAHARA=y
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=y
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=y
# CONFIG_BACKLIGHT_88PM860X is not set
# CONFIG_BACKLIGHT_LM3630A is not set
CONFIG_BACKLIGHT_LM3639=y
CONFIG_BACKLIGHT_LP855X=y
# CONFIG_BACKLIGHT_TPS65217 is not set
CONFIG_BACKLIGHT_AS3711=y
# CONFIG_BACKLIGHT_LV5207LP is not set
CONFIG_BACKLIGHT_BD6107=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_FB_SH_MOBILE_MERAM=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
# CONFIG_SND_PCM_OSS_PLUGINS is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=y
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
CONFIG_SND_ALS300=y
CONFIG_SND_ALI5451=y
# CONFIG_SND_ASIHPI is not set
CONFIG_SND_ATIIXP=y
CONFIG_SND_ATIIXP_MODEM=y
CONFIG_SND_AU8810=y
CONFIG_SND_AU8820=y
CONFIG_SND_AU8830=y
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=y
CONFIG_SND_BT87X_OVERCLOCK=y
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
CONFIG_SND_OXYGEN_LIB=y
CONFIG_SND_OXYGEN=y
CONFIG_SND_CS4281=y
CONFIG_SND_CS46XX=y
# CONFIG_SND_CS46XX_NEW_DSP is not set
CONFIG_SND_CS5535AUDIO=y
# CONFIG_SND_CTXFI is not set
CONFIG_SND_DARLA20=y
CONFIG_SND_GINA20=y
CONFIG_SND_LAYLA20=y
CONFIG_SND_DARLA24=y
CONFIG_SND_GINA24=y
CONFIG_SND_LAYLA24=y
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
CONFIG_SND_INDIGO=y
CONFIG_SND_INDIGOIO=y
CONFIG_SND_INDIGODJ=y
CONFIG_SND_INDIGOIOX=y
CONFIG_SND_INDIGODJX=y
CONFIG_SND_EMU10K1=y
CONFIG_SND_EMU10K1X=y
CONFIG_SND_ENS1370=y
CONFIG_SND_ENS1371=y
CONFIG_SND_ES1938=y
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
# CONFIG_SND_HDA_INPUT_JACK is not set
CONFIG_SND_HDA_PATCH_LOADER=y
# CONFIG_SND_HDA_CODEC_REALTEK is not set
# CONFIG_SND_HDA_CODEC_ANALOG is not set
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
# CONFIG_SND_HDA_CODEC_HDMI is not set
CONFIG_SND_HDA_I915=y
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
CONFIG_SND_ICE1712=y
CONFIG_SND_ICE1724=y
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=y
CONFIG_SND_KORG1212=y
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
CONFIG_SND_MAESTRO3=y
# CONFIG_SND_MAESTRO3_INPUT is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
CONFIG_SND_PCXHR=y
CONFIG_SND_RIPTIDE=y
# CONFIG_SND_RME32 is not set
CONFIG_SND_RME96=y
CONFIG_SND_RME9652=y
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_TRIDENT=y
CONFIG_SND_VIA82XX=y
CONFIG_SND_VIA82XX_MODEM=y
CONFIG_SND_VIRTUOSO=y
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_FIREWIRE is not set
# CONFIG_SND_PCMCIA is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_ADI=y
CONFIG_SND_SOC_ADI_AXI_I2S=y
CONFIG_SND_SOC_ADI_AXI_SPDIF=y
CONFIG_SND_ATMEL_SOC=y
# CONFIG_SND_BCM2835_SOC_I2S is not set
CONFIG_SND_EP93XX_SOC=y
# CONFIG_SND_DESIGNWARE_I2S is not set
CONFIG_SND_SOC_FSL_SPDIF=y
CONFIG_SND_IMX_SOC=y
CONFIG_SND_SOC_IMX_PCM_DMA=y
CONFIG_SND_SOC_IMX_SPDIF=y
CONFIG_SND_KIRKWOOD_SOC=y
CONFIG_SND_KIRKWOOD_SOC_OPENRD=y
# CONFIG_SND_KIRKWOOD_SOC_T5325 is not set
CONFIG_SND_MXS_SOC=y
CONFIG_SND_SOC_MXS_SGTL5000=y
CONFIG_SND_SOC_TEGRA=y
# CONFIG_SND_SOC_TEGRA_TRIMSLICE is not set
CONFIG_SND_SOC_I2C_AND_SPI=y
# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_CS42L51=y
CONFIG_SND_SOC_SGTL5000=y
CONFIG_SND_SIMPLE_CARD=y
CONFIG_SOUND_PRIME=y
CONFIG_AC97_BUS=y
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
CONFIG_HID_ACRUX=y
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=y
CONFIG_HID_AUREAL=y
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
CONFIG_HID_PRODIKEYS=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=y
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_EZKEY is not set
CONFIG_HID_KEYTOUCH=y
CONFIG_HID_KYE=y
CONFIG_HID_UCLOGIC=y
CONFIG_HID_WALTOP=y
# CONFIG_HID_GYRATION is not set
CONFIG_HID_ICADE=y
CONFIG_HID_TWINHAN=y
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LENOVO_TPKBD=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
CONFIG_PANTHERLORD_FF=y
CONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
CONFIG_SMARTJOYPLUS_FF=y
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=y
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
CONFIG_HID_WACOM=y
CONFIG_HID_WIIMOTE=y
CONFIG_HID_XINMO=y
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_HID_SENSOR_HUB=y
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
# CONFIG_MEMSTICK_JMICRON_38X is not set
CONFIG_MEMSTICK_R592=y
CONFIG_MEMSTICK_REALTEK_PCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_88PM860X is not set
CONFIG_LEDS_ATMEL_PWM=y
# CONFIG_LEDS_LM3530 is not set
CONFIG_LEDS_LM3533=y
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_LP3944=y
CONFIG_LEDS_LP55XX_COMMON=y
CONFIG_LEDS_LP5521=y
CONFIG_LEDS_LP5523=y
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8501=y
CONFIG_LEDS_CLEVO_MAIL=y
CONFIG_LEDS_PCA955X=y
CONFIG_LEDS_PCA963X=y
# CONFIG_LEDS_PCA9685 is not set
# CONFIG_LEDS_WM831X_STATUS is not set
CONFIG_LEDS_DA9052=y
# CONFIG_LEDS_DAC124S085 is not set
CONFIG_LEDS_PWM=y
CONFIG_LEDS_BD2802=y
# CONFIG_LEDS_INTEL_SS4200 is not set
CONFIG_LEDS_ADP5520=y
CONFIG_LEDS_DELL_NETBOOKS=y
CONFIG_LEDS_MC13783=y
CONFIG_LEDS_TCA6507=y
CONFIG_LEDS_LM355x=y
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_BLINKM=y
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_E752X=y
# CONFIG_EDAC_I82975X is not set
CONFIG_EDAC_I3000=y
# CONFIG_EDAC_I3200 is not set
CONFIG_EDAC_X38=y
CONFIG_EDAC_I5400=y
CONFIG_EDAC_I7CORE=y
CONFIG_EDAC_I5000=y
CONFIG_EDAC_I5100=y
CONFIG_EDAC_I7300=y
# CONFIG_EDAC_SBRIDGE is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_SYSTOHC is not set
CONFIG_RTC_DEBUG=y
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
# CONFIG_RTC_INTF_PROC is not set
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
CONFIG_RTC_DRV_TEST=y
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_88PM860X=y
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=y
CONFIG_RTC_DRV_DS3232=y
CONFIG_RTC_DRV_MAX6900=y
CONFIG_RTC_DRV_MAX8907=y
CONFIG_RTC_DRV_MAX8925=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_ISL12022=y
CONFIG_RTC_DRV_ISL12057=y
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PALMAS=y
# CONFIG_RTC_DRV_PCF2127 is not set
CONFIG_RTC_DRV_PCF8523=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_PCF8583=y
# CONFIG_RTC_DRV_M41T80 is not set
CONFIG_RTC_DRV_BQ32K=y
# CONFIG_RTC_DRV_TPS80031 is not set
CONFIG_RTC_DRV_RC5T583=y
CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
CONFIG_RTC_DRV_RX8581=y
CONFIG_RTC_DRV_RX8025=y
CONFIG_RTC_DRV_EM3027=y
# CONFIG_RTC_DRV_RV3029C2 is not set
CONFIG_RTC_DRV_S5M=y
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T93=y
CONFIG_RTC_DRV_M41T94=y
# CONFIG_RTC_DRV_DS1305 is not set
CONFIG_RTC_DRV_DS1390=y
CONFIG_RTC_DRV_MAX6902=y
CONFIG_RTC_DRV_R9701=y
# CONFIG_RTC_DRV_RS5C348 is not set
CONFIG_RTC_DRV_DS3234=y
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_RX4581 is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
CONFIG_RTC_DRV_DS1286=y
CONFIG_RTC_DRV_DS1511=y
# CONFIG_RTC_DRV_DS1553 is not set
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_DA9052=y
CONFIG_RTC_DRV_DA9055=y
CONFIG_RTC_DRV_STK17TA8=y
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_M48T35=y
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_RP5C01=y
CONFIG_RTC_DRV_V3020=y
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_WM831X is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_PCAP=y
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_RTC_DRV_MOXART=y
#
# HID Sensor RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_INTEL_MID_DMAC=y
CONFIG_INTEL_IOATDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
CONFIG_DW_DMAC_PCI=y
CONFIG_TIMB_DMA=y
CONFIG_PCH_DMA=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
CONFIG_DMA_ENGINE_RAID=y
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
# CONFIG_KS0108 is not set
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=y
CONFIG_UIO_SERCOS3=y
CONFIG_UIO_PCI_GENERIC=y
CONFIG_UIO_NETX=y
# CONFIG_UIO_MF624 is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
#
# Microsoft Hyper-V guest support
#
CONFIG_STAGING=y
# CONFIG_SLICOSS is not set
# CONFIG_ECHO is not set
# CONFIG_PANEL is not set
CONFIG_DX_SEP=y
#
# IIO staging drivers
#
#
# Accelerometers
#
# CONFIG_ADIS16201 is not set
# CONFIG_ADIS16203 is not set
# CONFIG_ADIS16204 is not set
CONFIG_ADIS16209=y
CONFIG_ADIS16220=y
CONFIG_ADIS16240=y
# CONFIG_SCA3000 is not set
#
# Analog to digital converters
#
# CONFIG_AD7291 is not set
# CONFIG_AD799X is not set
# CONFIG_AD7192 is not set
CONFIG_AD7280=y
CONFIG_LPC32XX_ADC=y
CONFIG_MXS_LRADC=y
CONFIG_SPEAR_ADC=y
#
# Analog digital bi-direction converters
#
#
# Capacitance to digital converters
#
CONFIG_AD7150=y
CONFIG_AD7152=y
# CONFIG_AD7746 is not set
#
# Direct Digital Synthesis
#
CONFIG_AD5930=y
# CONFIG_AD9832 is not set
CONFIG_AD9834=y
CONFIG_AD9850=y
# CONFIG_AD9852 is not set
# CONFIG_AD9910 is not set
# CONFIG_AD9951 is not set
#
# Digital gyroscope sensors
#
# CONFIG_ADIS16060 is not set
#
# Network Analyzer, Impedance Converters
#
# CONFIG_AD5933 is not set
#
# Light sensors
#
# CONFIG_SENSORS_ISL29018 is not set
# CONFIG_SENSORS_ISL29028 is not set
CONFIG_TSL2583=y
CONFIG_TSL2x7x=y
#
# Magnetometer sensors
#
# CONFIG_SENSORS_HMC5843 is not set
#
# Active energy metering IC
#
CONFIG_ADE7753=y
CONFIG_ADE7754=y
CONFIG_ADE7758=y
CONFIG_ADE7759=y
CONFIG_ADE7854=y
CONFIG_ADE7854_I2C=y
# CONFIG_ADE7854_SPI is not set
#
# Resolver to digital converters
#
CONFIG_AD2S90=y
#
# Triggers - standalone
#
# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set
# CONFIG_IIO_SIMPLE_DUMMY is not set
# CONFIG_FB_SM7XX is not set
CONFIG_CRYSTALHD=y
CONFIG_FB_XGI=y
CONFIG_ACPI_QUICKSTART=y
# CONFIG_FT1000 is not set
#
# Speakup console speech
#
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set
#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_DGRP=y
CONFIG_FIREWIRE_SERIAL=y
CONFIG_FWTTY_MAX_TOTAL_PORTS=64
CONFIG_FWTTY_MAX_CARD_PORTS=32
CONFIG_XILLYBUS=y
# CONFIG_XILLYBUS_PCIE is not set
CONFIG_DGNC=y
CONFIG_DGAP=y
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
CONFIG_ACERHDF=y
CONFIG_ASUS_LAPTOP=y
# CONFIG_DELL_LAPTOP is not set
CONFIG_DELL_WMI=y
CONFIG_DELL_WMI_AIO=y
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
CONFIG_AMILO_RFKILL=y
CONFIG_HP_ACCEL=y
CONFIG_HP_WMI=y
CONFIG_MSI_LAPTOP=y
CONFIG_PANASONIC_LAPTOP=y
CONFIG_COMPAL_LAPTOP=y
# CONFIG_SONY_LAPTOP is not set
CONFIG_IDEAPAD_LAPTOP=y
CONFIG_THINKPAD_ACPI=y
# CONFIG_THINKPAD_ACPI_ALSA_SUPPORT is not set
CONFIG_THINKPAD_ACPI_DEBUGFACILITIES=y
# CONFIG_THINKPAD_ACPI_DEBUG is not set
CONFIG_THINKPAD_ACPI_UNSAFE_LEDS=y
# CONFIG_THINKPAD_ACPI_VIDEO is not set
# CONFIG_THINKPAD_ACPI_HOTKEY_POLL is not set
CONFIG_SENSORS_HDAPS=y
CONFIG_INTEL_MENLOW=y
CONFIG_ACPI_WMI=y
CONFIG_MSI_WMI=y
CONFIG_TOPSTAR_LAPTOP=y
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_TOSHIBA_BT_RFKILL=y
CONFIG_ACPI_CMPC=y
# CONFIG_INTEL_IPS is not set
CONFIG_IBM_RTL=y
CONFIG_XO15_EBOOK=y
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_MXM_WMI=y
# CONFIG_INTEL_OAKTRAIL is not set
CONFIG_SAMSUNG_Q10=y
CONFIG_APPLE_GMUX=y
CONFIG_INTEL_RST=y
CONFIG_INTEL_SMARTCONNECT=y
CONFIG_PVPANIC=y
# CONFIG_CHROME_PLATFORMS is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
CONFIG_COMMON_CLK_WM831X=y
CONFIG_COMMON_CLK_SI5351=y
# CONFIG_COMMON_CLK_S2MPS11 is not set
CONFIG_CLK_TWL6040=y
#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_MAILBOX=y
# CONFIG_IOMMU_SUPPORT is not set
#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_STE_MODEM_RPROC=y
#
# Rpmsg drivers
#
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
#
# DEVFREQ Drivers
#
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
CONFIG_EXTCON_MAX77693=y
# CONFIG_EXTCON_ARIZONA is not set
CONFIG_EXTCON_PALMAS=y
# CONFIG_MEMORY is not set
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
# CONFIG_IIO_BUFFER_CB is not set
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Accelerometers
#
CONFIG_BMA180=y
CONFIG_HID_SENSOR_ACCEL_3D=y
CONFIG_IIO_ST_ACCEL_3AXIS=y
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=y
CONFIG_IIO_ST_ACCEL_SPI_3AXIS=y
# CONFIG_KXSD9 is not set
#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
CONFIG_AD7266=y
CONFIG_AD7298=y
CONFIG_AD7476=y
CONFIG_AD7791=y
# CONFIG_AD7793 is not set
CONFIG_AD7887=y
CONFIG_AD7923=y
# CONFIG_MAX1363 is not set
# CONFIG_MCP320X is not set
CONFIG_MCP3422=y
# CONFIG_NAU7802 is not set
# CONFIG_TI_ADC081C is not set
CONFIG_TI_AM335X_ADC=y
#
# Amplifiers
#
CONFIG_AD8366=y
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=y
CONFIG_HID_SENSOR_IIO_TRIGGER=y
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Digital to analog converters
#
CONFIG_AD5064=y
# CONFIG_AD5360 is not set
# CONFIG_AD5380 is not set
# CONFIG_AD5421 is not set
CONFIG_AD5446=y
CONFIG_AD5449=y
CONFIG_AD5504=y
CONFIG_AD5624R_SPI=y
CONFIG_AD5686=y
# CONFIG_AD5755 is not set
CONFIG_AD5764=y
CONFIG_AD5791=y
# CONFIG_AD7303 is not set
# CONFIG_MAX517 is not set
CONFIG_MCP4725=y
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
CONFIG_AD9523=y
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=y
#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=y
CONFIG_ADIS16130=y
CONFIG_ADIS16136=y
CONFIG_ADIS16260=y
CONFIG_ADXRS450=y
CONFIG_HID_SENSOR_GYRO_3D=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_IIO_ST_GYRO_SPI_3AXIS=y
CONFIG_ITG3200=y
#
# Humidity sensors
#
#
# Inertial measurement units
#
CONFIG_ADIS16400=y
CONFIG_ADIS16480=y
CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y
CONFIG_INV_MPU6050_IIO=y
#
# Light sensors
#
CONFIG_ADJD_S311=y
CONFIG_APDS9300=y
CONFIG_CM32181=y
# CONFIG_CM36651 is not set
CONFIG_GP2AP020A00F=y
# CONFIG_HID_SENSOR_ALS is not set
CONFIG_SENSORS_LM3533=y
# CONFIG_TCS3472 is not set
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL4531=y
CONFIG_VCNL4000=y
#
# Magnetometer sensors
#
CONFIG_MAG3110=y
CONFIG_HID_SENSOR_MAGNETOMETER_3D=y
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_IIO_ST_MAGN_SPI_3AXIS=y
#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=y
#
# Triggers - standalone
#
CONFIG_IIO_INTERRUPT_TRIGGER=y
# CONFIG_IIO_SYSFS_TRIGGER is not set
#
# Pressure sensors
#
CONFIG_MPL3115=y
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
CONFIG_IIO_ST_PRESS_SPI=y
#
# Temperature sensors
#
CONFIG_TMP006=y
CONFIG_NTB=y
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_LP3943=y
# CONFIG_PWM_RENESAS_TPU is not set
CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=y
CONFIG_SERIAL_IPOCTAL=y
CONFIG_RESET_CONTROLLER=y
CONFIG_FMC=y
CONFIG_FMC_FAKEDEV=y
CONFIG_FMC_TRIVIAL=y
CONFIG_FMC_WRITE_EEPROM=y
CONFIG_FMC_CHARDEV=y
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_PHY_EXYNOS_MIPI_VIDEO=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_POWERCAP is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y
# CONFIG_DMIID is not set
CONFIG_DMI_SYSFS=y
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_GOOGLE_FIRMWARE=y
#
# Google Firmware Drivers
#
CONFIG_GOOGLE_SMI=y
# CONFIG_GOOGLE_MEMCONSOLE is not set
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_UEFI_CPER=y
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_FS_POSIX_ACL is not set
CONFIG_EXPORTFS=y
# CONFIG_FILE_LOCKING is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
CONFIG_FSCACHE_DEBUG=y
# CONFIG_FSCACHE_OBJECT_LIST is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
# CONFIG_NLS_CODEPAGE_855 is not set
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
# CONFIG_NLS_CODEPAGE_865 is not set
CONFIG_NLS_CODEPAGE_866=y
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
CONFIG_NLS_CODEPAGE_1250=y
CONFIG_NLS_CODEPAGE_1251=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
# CONFIG_NLS_ISO8859_5 is not set
CONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_MAC_ROMAN=y
CONFIG_NLS_MAC_CELTIC=y
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
# CONFIG_NLS_MAC_CYRILLIC is not set
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
# CONFIG_NLS_MAC_INUIT is not set
CONFIG_NLS_MAC_ROMANIAN=y
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_READABLE_ASM=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400
CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_MEMORY_NOTIFIER_ERROR_INJECT is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_LOCK_ALLOC=y
# CONFIG_PROVE_LOCKING is not set
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
# CONFIG_SPARSE_RCU_POINTER is not set
CONFIG_RCU_TORTURE_TEST=y
# CONFIG_RCU_TORTURE_TEST_RUNNABLE is not set
# CONFIG_RCU_TRACE is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_UPROBE_EVENT is not set
# CONFIG_PROBE_EVENTS is not set
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
CONFIG_RING_BUFFER_BENCHMARK=y
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
#
# Runtime Testing
#
CONFIG_TEST_LIST_SORT=y
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_RBTREE_TEST=y
# CONFIG_ATOMIC64_SELFTEST is not set
CONFIG_TEST_STRING_HELPERS=y
CONFIG_TEST_KSTRTOX=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
CONFIG_BUILD_DOCSRC=y
CONFIG_DMA_API_DEBUG=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_EARLY_PRINTK_EFI is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DOUBLEFAULT is not set
CONFIG_DEBUG_TLBFLUSH=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
CONFIG_CPA_DEBUG=y
# CONFIG_OPTIMIZE_INLINING is not set
CONFIG_DEBUG_NMI_SELFTEST=y
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
CONFIG_ENCRYPTED_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
CONFIG_SECURITY_PATH=y
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_YAMA_STACKED is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_YAMA=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="yama"
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=y
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_RMD128=y
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
# CONFIG_CRYPTO_SHA256_SSSE3 is not set
# CONFIG_CRYPTO_SHA512_SSSE3 is not set
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=y
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAMELLIA_X86_64=y
CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=y
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST5_AVX_X86_64=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_CAST6_AVX_X86_64=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_X86_64=y
CONFIG_CRYPTO_SEED=y
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
CONFIG_CRYPTO_SERPENT_AVX_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=y
CONFIG_CRYPTO_TEA=y
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_X86_64=y
CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=y
CONFIG_CRYPTO_TWOFISH_AVX_X86_64=y
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
# CONFIG_CRYPTO_HW is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_STMP_DEVICE=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
CONFIG_CRC64_ECMA=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
# CONFIG_XZ_DEC is not set
# CONFIG_XZ_DEC_BCJ is not set
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set
CONFIG_DDR=y
CONFIG_UCS2_STRING=y
^ permalink raw reply
* Re: [PATCH 1/1] When timestamping is enabled, stmmac_tx_clean will call stmmac_get_tx_hwtstamp to get tx TS. It's possible that skb is NULL because there are other network frames that use several descriptors. So we must return immediately in stmmac_get_tx_hwtstamp if skb is NULL to avoid system crash.
From: Bruce Liu @ 2014-01-13 13:54 UTC (permalink / raw)
To: Daniel Borkmann; +Cc: peppe.cavallaro, netdev, linux-kernel
In-Reply-To: <52D27EB4.9050909@redhat.com>
On Sun, Jan 12, 2014 at 12:38:28PM +0100, Daniel Borkmann wrote:
> On 01/12/2014 10:39 AM, Bruce Liu wrote:
> > When timestamping is enabled, stmmac_tx_clean will call stmmac_get_tx_hwtstamp to get tx TS.
> > It's possible that skb is NULL because there are other network frames that use several descriptors.
> > So we must return immediately in stmmac_get_tx_hwtstamp if skb is NULL to avoid system crash.
> >
> >
> >Signed-off-by: Bruce Liu <damuzi000@gmail.com>
>
> Please see Documentation/SubmittingPatches +489
>
> You subject line is way too long and should just be something like:
>
> [PATCH net-next] net: stmmac: fix NULL pointer dereference in stmmac_get_tx_hwtstamp
>
> Don't indent your actual commit message with whitespaces as prefix,
> and do a line break after around 70 chars.
>
> Btw, I mentioned net-next in the subject since merge window will
> open soon anyway.
>
Thanks, and I'll resend the patch.
Bruce.
^ permalink raw reply
* Re: [PATCH net-next] ipv4: remove the useless argument from ip_tunnel_hash()
From: Sergei Shtylyov @ 2014-01-13 13:55 UTC (permalink / raw)
To: Duan Jiong, David Miller; +Cc: netdev
In-Reply-To: <52D2689A.4040800@cn.fujitsu.com>
Hello.
On 12-01-2014 14:04, Duan Jiong wrote:
> Since commit c544193214 introduced function ip_tunnel_hash(), the argument
Please also specify that commit's summary line in parens.
> itn is no longer in use, so remove it.
> Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
WBR, Sergei
^ permalink raw reply
* Re: [PATCH] sctp: remove a redundant NULL check
From: Neil Horman @ 2014-01-13 14:02 UTC (permalink / raw)
To: Dan Carpenter
Cc: Vlad Yasevich, David S. Miller, linux-sctp, netdev,
kernel-janitors
In-Reply-To: <20140113134608.GA5232@elgon.mountain>
On Mon, Jan 13, 2014 at 04:46:08PM +0300, Dan Carpenter wrote:
> It confuses Smatch when we check "sinit" for NULL and then non-NULL and
> that causes a false positive warning later.
>
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
>
> diff --git a/net/sctp/socket.c b/net/sctp/socket.c
> index d32dae78a486..27f1717170c2 100644
> --- a/net/sctp/socket.c
> +++ b/net/sctp/socket.c
> @@ -1743,7 +1743,7 @@ static int sctp_sendmsg(struct kiocb *iocb, struct sock *sk,
> * either the default or the user specified stream counts.
> */
> if (sinfo) {
> - if (!sinit || (sinit && !sinit->sinit_num_ostreams)) {
> + if (!sinit || !sinit->sinit_num_ostreams) {
> /* Check against the defaults. */
> if (sinfo->sinfo_stream >=
> sp->initmsg.sinit_num_ostreams) {
Acked-by: Neil Horman <nhorman@tuxdriver.com>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sctp" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply
* [PATCH net-next] IPv6: move the anycast_src_echo_reply sysctl to netns_sysctl_ipv6
From: Francois-Xavier Le Bail @ 2014-01-13 14:59 UTC (permalink / raw)
To: netdev
Cc: Hannes Frederic Sowa, David S. Miller, Alexey Kuznetsov,
James Morris, Hideaki Yoshifuji, Patrick McHardy,
Francois-Xavier Le Bail
This change move anycast_src_echo_reply sysctl with other ipv6 sysctls.
Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com>
---
include/net/netns/ipv6.h | 2 +-
net/ipv6/icmp.c | 2 +-
net/ipv6/sysctl_net_ipv6.c | 4 ++--
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/include/net/netns/ipv6.h b/include/net/netns/ipv6.h
index 76fc7d1..592fecd 100644
--- a/include/net/netns/ipv6.h
+++ b/include/net/netns/ipv6.h
@@ -28,6 +28,7 @@ struct netns_sysctl_ipv6 {
int ip6_rt_mtu_expires;
int ip6_rt_min_advmss;
int icmpv6_time;
+ int anycast_src_echo_reply;
};
struct netns_ipv6 {
@@ -73,7 +74,6 @@ struct netns_ipv6 {
#endif
atomic_t dev_addr_genid;
atomic_t rt_genid;
- int anycast_src_echo_reply;
};
#if IS_ENABLED(CONFIG_NF_DEFRAG_IPV6)
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index 9a809a4..13640f2 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -557,7 +557,7 @@ static void icmpv6_echo_reply(struct sk_buff *skb)
saddr = &ipv6_hdr(skb)->daddr;
if (!ipv6_unicast_destination(skb) &&
- !(net->ipv6.anycast_src_echo_reply &&
+ !(net->ipv6.sysctl.anycast_src_echo_reply &&
ipv6_anycast_destination(skb)))
saddr = NULL;
diff --git a/net/ipv6/sysctl_net_ipv6.c b/net/ipv6/sysctl_net_ipv6.c
index 6b6a2c8..b51b268 100644
--- a/net/ipv6/sysctl_net_ipv6.c
+++ b/net/ipv6/sysctl_net_ipv6.c
@@ -26,7 +26,7 @@ static struct ctl_table ipv6_table_template[] = {
},
{
.procname = "anycast_src_echo_reply",
- .data = &init_net.ipv6.anycast_src_echo_reply,
+ .data = &init_net.ipv6.sysctl.anycast_src_echo_reply,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec
@@ -58,7 +58,7 @@ static int __net_init ipv6_sysctl_net_init(struct net *net)
if (!ipv6_table)
goto out;
ipv6_table[0].data = &net->ipv6.sysctl.bindv6only;
- ipv6_table[1].data = &net->ipv6.anycast_src_echo_reply;
+ ipv6_table[1].data = &net->ipv6.sysctl.anycast_src_echo_reply;
ipv6_route_table = ipv6_route_sysctl_init(net);
if (!ipv6_route_table)
^ permalink raw reply related
* Re: [PATCH net] net: avoid reference counter overflows on fib_rules in multicast forwarding
From: Eric Dumazet @ 2014-01-13 15:18 UTC (permalink / raw)
To: Hannes Frederic Sowa; +Cc: Bob Falken, Julian Anastasov, netdev, kaber, tgraf
In-Reply-To: <20140113014522.GH6586@order.stressinduktion.org>
On Mon, 2014-01-13 at 02:45 +0100, Hannes Frederic Sowa wrote:
> Bob Falken reported that after 4G packets, multicast forwarding stopped
> working. This was because of a rule reference counter overflow which
> freed the rule as soon as the overflow happend.
>
> This patch solves this by adding the FIB_LOOKUP_NOREF flag to
> fib_rules_lookup calls. This is safe even from non-rcu locked sections
> as in this case the flag only implies not taking a reference to the rule,
> which we don't need at all.
We need to not forget this when/if we remove FIB_LOOKUP_NOREF flag,
as all callers use it : We'll have to keep rcu_read_lock() in
fib_rules_lookup()
>
> Rules only hold references to the namespace, which are guaranteed to be
> available during the call of the non-rcu protected function reg_vif_xmit
> because of the interface reference which itself holds a reference to
> the net namespace.
>
> Fixes: f0ad0860d01e47 ("ipv4: ipmr: support multiple tables")
> Fixes: d1db275dd3f6e4 ("ipv6: ip6mr: support multiple tables")
> Reported-by: Bob Falken <NetFestivalHaveFun@gmx.com>
> Cc: Patrick McHardy <kaber@trash.net>
> Cc: Thomas Graf <tgraf@suug.ch>
> Cc: Julian Anastasov <ja@ssi.bg>
> Cc: Eric Dumazet <eric.dumazet@gmail.com>
> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
> ---
> Bob Falken already tested this patch, as it is similar to my first
> attempt but the additional and similar fix for ipv6.
>
> We need an additional fix for kernels without FIB_LOOKUP_NOREF, but I'll
> move that to tomorrow, as it is already late here.
Acked-by: Eric Dumazet <edumazet@google.com>
Thanks !
^ permalink raw reply
* [RFC net] tcp: metrics: Avoid duplicate entries with the same destination-IP
From: Christoph Paasch @ 2014-01-13 15:25 UTC (permalink / raw)
To: netdev; +Cc: David Miller, Eric Dumazet
Note: This patch is based on "net" and so the source-IP is not yet part
of the tcp-metrics.
Because the tcp-metrics is an RCU-list, it may be that two
soft-interrupts are inside __tcp_get_metrics() for the same
destination-IP at the same time. If this destination-IP is not yet part of
the tcp-metrics, both soft-interrupts will end up in tcpm_new and create
a new entry for this IP.
So, we will have two tcp-metrics with the same destination-IP in the list.
This patch now takes the tcp_metrics_lock before calling
__tcp_get_metrics().
I post this as an RFC, because this patch will make the TCP-stack take
the tcp_metrics_lock even if the metric is already in the cache.
I tested it with apache-benchmark on a short file with
ab -c 100 -n 100000 server/1KB
IMO this should stress the code most, but there was no significant
performance regression.
Another solution might be to leave tcp_get_metrics() as it is, and in
tcpm_new do another call to __tcp_get_metrics() while holding the
spin-lock. We would then check __tcp_get_metrics twice for new entries
but we won't hold the spin-lock needlessly anymore.
So, it's a tradeoff between taking the tcp_metrics_lock more often vs.
calling __tcp_get_metrics twice for new entries.
Suggestions are very welcome.
Fixes: 51c5d0c4b169b (tcp: Maintain dynamic metrics in local cache.)
Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
---
net/ipv4/tcp_metrics.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/net/ipv4/tcp_metrics.c b/net/ipv4/tcp_metrics.c
index 06493736fbc8..7748a5d9f37a 100644
--- a/net/ipv4/tcp_metrics.c
+++ b/net/ipv4/tcp_metrics.c
@@ -138,7 +138,6 @@ static struct tcp_metrics_block *tcpm_new(struct dst_entry *dst,
struct tcp_metrics_block *tm;
struct net *net;
- spin_lock_bh(&tcp_metrics_lock);
net = dev_net(dst->dev);
if (unlikely(reclaim)) {
struct tcp_metrics_block *oldest;
@@ -153,7 +152,7 @@ static struct tcp_metrics_block *tcpm_new(struct dst_entry *dst,
} else {
tm = kmalloc(sizeof(*tm), GFP_ATOMIC);
if (!tm)
- goto out_unlock;
+ return NULL;
}
tm->tcpm_addr = *addr;
@@ -164,8 +163,6 @@ static struct tcp_metrics_block *tcpm_new(struct dst_entry *dst,
rcu_assign_pointer(net->ipv4.tcp_metrics_hash[hash].chain, tm);
}
-out_unlock:
- spin_unlock_bh(&tcp_metrics_lock);
return tm;
}
@@ -303,6 +300,8 @@ static struct tcp_metrics_block *tcp_get_metrics(struct sock *sk,
net = dev_net(dst->dev);
hash = hash_32(hash, net->ipv4.tcp_metrics_hash_log);
+ spin_lock_bh(&tcp_metrics_lock);
+
tm = __tcp_get_metrics(&addr, net, hash);
reclaim = false;
if (tm == TCP_METRICS_RECLAIM_PTR) {
@@ -314,6 +313,8 @@ static struct tcp_metrics_block *tcp_get_metrics(struct sock *sk,
else
tcpm_check_stamp(tm, dst);
+ spin_unlock_bh(&tcp_metrics_lock);
+
return tm;
}
--
1.8.3.2
^ permalink raw reply related
* Re: [PATCH v4 0/2] ipv6 addrconf: add IFA_F_NOPREFIXROUTE flag to suppress creation of IP6 routes
From: Jiri Pirko @ 2014-01-13 15:31 UTC (permalink / raw)
To: David Miller; +Cc: thaller, hannes, netdev, stephen, dcbw
In-Reply-To: <20140110.181030.2081631538801450145.davem@davemloft.net>
Sat, Jan 11, 2014 at 12:10:30AM CET, davem@davemloft.net wrote:
>From: Thomas Haller <thaller@redhat.com>
>Date: Thu, 9 Jan 2014 01:30:02 +0100
>
>> v1 -> v2: add a second commit, handling NOPREFIXROUTE in ip6_del_addr.
>> v2 -> v3: reword commit messages, code comments and some refactoring.
>> v3 -> v4: refactor, rename variables, add enum
>>
>> Thomas Haller (2):
>> ipv6 addrconf: add IFA_F_NOPREFIXROUTE flag to suppress creation of
>> IP6 routes
>> ipv6 addrconf: don't cleanup prefix route for IFA_F_NOPREFIXROUTE
>
>Series applied, thanks Thomas.
Hi Dave. Have you pushed this already? I can't see these patches in
net-next.
Thanks
^ permalink raw reply
* Re: [PATCH net-next v2 4/4] virtio-net: initial debugfs support, export mergeable rx buffer size
From: Ben Hutchings @ 2014-01-13 15:38 UTC (permalink / raw)
To: Michael S. Tsirkin
Cc: Michael Dalton, Jason Wang, David S. Miller, netdev, Eric Dumazet,
Rusty Russell, lf-virt
In-Reply-To: <20140113094018.GA22726@redhat.com>
On Mon, 2014-01-13 at 11:40 +0200, Michael S. Tsirkin wrote:
> On Sun, Jan 12, 2014 at 03:32:28PM -0800, Michael Dalton wrote:
[...]
> > The last issue is how the rx_queue_attribute 'show' function
> > implementation for mergeable_rx_buffer_size will access the appropriate
> > per-receive queue EWMA data. The arguments to the show function will be
> > the netdev_rx_queue and the attribute itself. We can get to the
> > struct net_device from the netdev_rx_queue. If we extended
> > netdev_rx_queue to indicate the queue_index or to store a void *priv_data
> > pointer, that would be sufficient to allow us to resolve this issue.
>
> Hmm netdev_rx_queue is not defined unless CONFIG_RPS is set.
> Maybe we should use a different structure.
[...]
I don't think RPS should own this structure. It's just that there are
currently no per-RX-queue attributes other than those defined by RPS.
By the way, CONFIG_RPS is equivalent to CONFIG_SMP so will likely be
enabled already in most places where virtio_net is used.
Ben.
--
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
^ permalink raw reply
* [PATCH] xprtrdma: silence frame size warning
From: Paul Bolle @ 2014-01-13 15:45 UTC (permalink / raw)
To: Trond Myklebust, J. Bruce Fields, David S. Miller
Cc: linux-nfs, netdev, linux-kernel
Building verbs.o on 32 bits x86, with CONFIG_FRAME_WARN set to 1024, its
default value, triggers this GCC warning:
net/sunrpc/xprtrdma/verbs.c: In function ‘rpcrdma_register_default_external’:
net/sunrpc/xprtrdma/verbs.c:1774:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Silence this warning by allocating "ipb" dynamically.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
0) Compile tested only (on 32 bits x86). I don't have access to
Infiniband hardware.
1) Please note that this is not a new warning. The oldest build log I
have still available on this machine is for a v3.8 rc, and it already
showed this warning.
2) I do hope my choice for the GFP_KERNEL flag is correct here.
net/sunrpc/xprtrdma/verbs.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
index 93726560..939ccc8 100644
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -1736,11 +1736,14 @@ rpcrdma_register_default_external(struct rpcrdma_mr_seg *seg,
int mem_priv = (writing ? IB_ACCESS_REMOTE_WRITE :
IB_ACCESS_REMOTE_READ);
struct rpcrdma_mr_seg *seg1 = seg;
- struct ib_phys_buf ipb[RPCRDMA_MAX_DATA_SEGS];
+ struct ib_phys_buf *ipb;
int len, i, rc = 0;
if (*nsegs > RPCRDMA_MAX_DATA_SEGS)
*nsegs = RPCRDMA_MAX_DATA_SEGS;
+ ipb = kmalloc(sizeof(*ipb) * *nsegs, GFP_KERNEL);
+ if (ipb == NULL)
+ return -ENOMEM;
for (len = 0, i = 0; i < *nsegs;) {
rpcrdma_map_one(ia, seg, writing);
ipb[i].addr = seg->mr_dma;
@@ -1770,6 +1773,7 @@ rpcrdma_register_default_external(struct rpcrdma_mr_seg *seg,
seg1->mr_len = len;
}
*nsegs = i;
+ kfree(ipb);
return rc;
}
--
1.8.4.2
^ permalink raw reply related
* Re: [PATCH] xprtrdma: silence frame size warning
From: Trond Myklebust @ 2014-01-13 15:59 UTC (permalink / raw)
To: Paul Bolle, Lever Charles Edward
Cc: Dr Fields James Bruce, Miller David S., Linux NFS Mailing List,
netdev, linux-kernel
In-Reply-To: <1389627955.20467.9.camel@x41>
On Jan 13, 2014, at 10:45, Paul Bolle <pebolle@tiscali.nl> wrote:
> Building verbs.o on 32 bits x86, with CONFIG_FRAME_WARN set to 1024, its
> default value, triggers this GCC warning:
> net/sunrpc/xprtrdma/verbs.c: In function ‘rpcrdma_register_default_external’:
> net/sunrpc/xprtrdma/verbs.c:1774:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=]
>
> Silence this warning by allocating "ipb" dynamically.
>
> Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
> ---
> 0) Compile tested only (on 32 bits x86). I don't have access to
> Infiniband hardware.
>
> 1) Please note that this is not a new warning. The oldest build log I
> have still available on this machine is for a v3.8 rc, and it already
> showed this warning.
>
> 2) I do hope my choice for the GFP_KERNEL flag is correct here.
>
> net/sunrpc/xprtrdma/verbs.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
> index 93726560..939ccc8 100644
> --- a/net/sunrpc/xprtrdma/verbs.c
> +++ b/net/sunrpc/xprtrdma/verbs.c
> @@ -1736,11 +1736,14 @@ rpcrdma_register_default_external(struct rpcrdma_mr_seg *seg,
> int mem_priv = (writing ? IB_ACCESS_REMOTE_WRITE :
> IB_ACCESS_REMOTE_READ);
> struct rpcrdma_mr_seg *seg1 = seg;
> - struct ib_phys_buf ipb[RPCRDMA_MAX_DATA_SEGS];
> + struct ib_phys_buf *ipb;
> int len, i, rc = 0;
>
> if (*nsegs > RPCRDMA_MAX_DATA_SEGS)
> *nsegs = RPCRDMA_MAX_DATA_SEGS;
> + ipb = kmalloc(sizeof(*ipb) * *nsegs, GFP_KERNEL);
> + if (ipb == NULL)
> + return -ENOMEM;
> for (len = 0, i = 0; i < *nsegs;) {
> rpcrdma_map_one(ia, seg, writing);
> ipb[i].addr = seg->mr_dma;
> @@ -1770,6 +1773,7 @@ rpcrdma_register_default_external(struct rpcrdma_mr_seg *seg,
> seg1->mr_len = len;
> }
> *nsegs = i;
> + kfree(ipb);
> return rc;
> }
Hi Paul,
Unfortunately, the above could be called from a file write back context, so we cannot use GFP_KERNEL allocations. In fact, I suspect we should only use GFP_ATOMIC, and then have the rpc_task delay and retry if the allocation fails.
The problem is that it looks to me as if xprt_rdma_send_request will currently fail, if we return an error from rpcrdma_register_default_external.
Chuck, will you be able to look into the above issue as part of your RDMA work?
Cheers
Trond
--
Trond Myklebust
Linux NFS client maintainer
^ permalink raw reply
* Re: [PATCH] sh_eth: fix garbled TX error message
From: Sergei Shtylyov @ 2014-01-13 16:15 UTC (permalink / raw)
To: Joe Perches, Simon Horman; +Cc: netdev, linux-sh
In-Reply-To: <1389576241.24849.10.camel@joe-AO722>
Hello.
On 13-012014 5:24, Joe Perches wrote:
>>> sh_eth_error() in case of a TX error tries to print a message using 2 dev_err()
>>> calls with the first string not finished by '\n', so that the resulting message
>>> would inevitably come out garbled, with something like "3net eth0: " inserted
>>> in the middle. Avoid that by merging 2 calls into one.
> I believe this interleaving should not happen since
> commit e28d713704117bca0820c732210df6075b09f13b
> (2.6.31 days)
I believe you have given me the wrong commit, which has nothing to do the
the newline problem per se. It just adds KERN_DEFAULT. I was able to find the
correct commit though: it's the parent of the commit you cited,
5fd29d6ccbc98884569d6f3105aeca70858b3e0f -- so you're probably right, and I
should have tested my assumption beforehand... (I'd like to merge these
dev_err() calls still though).
> Perhaps it'd be better to use netdev_<level> and
> netif_<level> instead of dev_<level> and pr_<level>.
Thank you, I got it the first time you suggested it, I just haven't had
time to implement it yet.
> uncompiled/untested...
Thanks for the patch. I don't agree with all of it though...
> ---
>
> drivers/net/ethernet/renesas/sh_eth.c | 63 ++++++++++++++++-------------------
> 1 file changed, 28 insertions(+), 35 deletions(-)
> diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
> index 8884107..6baad48 100644
> --- a/drivers/net/ethernet/renesas/sh_eth.c
> +++ b/drivers/net/ethernet/renesas/sh_eth.c
[...]
> @@ -2691,9 +2683,10 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
> /* read and set MAC address */
> read_mac_address(ndev, pd->mac_addr);
> if (!is_valid_ether_addr(ndev->dev_addr)) {
> - dev_warn(&pdev->dev,
> - "no valid MAC address supplied, using a random one.\n");
> eth_hw_addr_random(ndev);
> + dev_warn(&pdev->dev,
> + "no valid MAC address supplied, using random %pM\n",
> + ndev->dev_addr);
There's no need to print random MAC address twice. It's already printed
right below.
WBR, Sergei
^ permalink raw reply
* Re: [PATCH] xprtrdma: silence frame size warning
From: Chuck Lever @ 2014-01-13 16:17 UTC (permalink / raw)
To: Trond Myklebust, Paul Bolle
Cc: J. Bruce Fields, Miller David S., Linux NFS Mailing List, netdev,
LKML Kernel
In-Reply-To: <CDD9CEF2-F91A-4ABA-8DA7-53AF8A749194@primarydata.com>
Hi-
On Jan 13, 2014, at 10:59 AM, Trond Myklebust <trond.myklebust@primarydata.com> wrote:
>
> On Jan 13, 2014, at 10:45, Paul Bolle <pebolle@tiscali.nl> wrote:
>
>> Building verbs.o on 32 bits x86, with CONFIG_FRAME_WARN set to 1024, its
>> default value, triggers this GCC warning:
>> net/sunrpc/xprtrdma/verbs.c: In function ‘rpcrdma_register_default_external’:
>> net/sunrpc/xprtrdma/verbs.c:1774:1: warning: the frame size of 1040 bytes is larger than 1024 bytes [-Wframe-larger-than=]
>>
>> Silence this warning by allocating "ipb" dynamically.
>>
>> Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
>> ---
>> 0) Compile tested only (on 32 bits x86). I don't have access to
>> Infiniband hardware.
>>
>> 1) Please note that this is not a new warning. The oldest build log I
>> have still available on this machine is for a v3.8 rc, and it already
>> showed this warning.
>>
>> 2) I do hope my choice for the GFP_KERNEL flag is correct here.
>>
>> net/sunrpc/xprtrdma/verbs.c | 6 +++++-
>> 1 file changed, 5 insertions(+), 1 deletion(-)
>>
>> diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
>> index 93726560..939ccc8 100644
>> --- a/net/sunrpc/xprtrdma/verbs.c
>> +++ b/net/sunrpc/xprtrdma/verbs.c
>> @@ -1736,11 +1736,14 @@ rpcrdma_register_default_external(struct rpcrdma_mr_seg *seg,
>> int mem_priv = (writing ? IB_ACCESS_REMOTE_WRITE :
>> IB_ACCESS_REMOTE_READ);
>> struct rpcrdma_mr_seg *seg1 = seg;
>> - struct ib_phys_buf ipb[RPCRDMA_MAX_DATA_SEGS];
>> + struct ib_phys_buf *ipb;
>> int len, i, rc = 0;
>>
>> if (*nsegs > RPCRDMA_MAX_DATA_SEGS)
>> *nsegs = RPCRDMA_MAX_DATA_SEGS;
>> + ipb = kmalloc(sizeof(*ipb) * *nsegs, GFP_KERNEL);
>> + if (ipb == NULL)
>> + return -ENOMEM;
>> for (len = 0, i = 0; i < *nsegs;) {
>> rpcrdma_map_one(ia, seg, writing);
>> ipb[i].addr = seg->mr_dma;
>> @@ -1770,6 +1773,7 @@ rpcrdma_register_default_external(struct rpcrdma_mr_seg *seg,
>> seg1->mr_len = len;
>> }
>> *nsegs = i;
>> + kfree(ipb);
>> return rc;
>> }
>
> Hi Paul,
>
> Unfortunately, the above could be called from a file write back context, so we cannot use GFP_KERNEL allocations. In fact, I suspect we should only use GFP_ATOMIC, and then have the rpc_task delay and retry if the allocation fails.
>
> The problem is that it looks to me as if xprt_rdma_send_request will currently fail, if we return an error from rpcrdma_register_default_external.
>
> Chuck, will you be able to look into the above issue as part of your RDMA work?
I’m building a queue of NFS/RDMA work on bugzilla.kernel.org. Let’s create a defect report there to document this, and it will get prioritized with the rest. Paul, can you do that to start us off? Product “File system”, Component “NFS”.
I can’t say that a warning on 32-bit x86 is going to be an especially high priority. However, the underlying issue of allocating arrays of data segments on the stack is something that needs extended attention, and is already in plan.
--
Chuck Lever
chuck[dot]lever[at]oracle[dot]com
^ permalink raw reply
* [PATCH 0/4] delete useless variable
From: Julia Lawall @ 2014-01-13 16:17 UTC (permalink / raw)
To: brcm80211-dev-list
Cc: devel, linux-fbdev, kernel-janitors, linux-wireless, linux-kernel,
netdev
These patches delete declarations and initializations of variables that are
only assigned to constants but never used otherwise.
The complete semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r exists@
type T;
identifier i,i2;
position p;
@@
T i@p;
...
i = i2
@@
type r.T;
identifier r.i;
constant c;
position p != r.p;
@@
-T i@p;
<... when != i
-i = c;
...>
// </smpl>
^ permalink raw reply
* [PATCH 1/4] ksz884x: delete useless variable
From: Julia Lawall @ 2014-01-13 16:17 UTC (permalink / raw)
To: netdev; +Cc: kernel-janitors, linux-kernel
In-Reply-To: <1389629847-5330-1-git-send-email-Julia.Lawall@lip6.fr>
From: Julia Lawall <Julia.Lawall@lip6.fr>
Delete a variable that is at most only assigned to a constant, but never
used otherwise. In this code, it is the variable result that is used for
the return code, not rc.
A simplified version of the semantic patch that fixes this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
type T;
identifier i;
constant c;
@@
-T i;
<... when != i
-i = c;
...>
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
---
drivers/net/ethernet/micrel/ksz884x.c | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/net/ethernet/micrel/ksz884x.c b/drivers/net/ethernet/micrel/ksz884x.c
index 8e9dad7..ce84dc2 100644
--- a/drivers/net/ethernet/micrel/ksz884x.c
+++ b/drivers/net/ethernet/micrel/ksz884x.c
@@ -5853,15 +5853,12 @@ static int netdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
struct dev_info *hw_priv = priv->adapter;
struct ksz_hw *hw = &hw_priv->hw;
struct ksz_port *port = &priv->port;
- int rc;
int result = 0;
struct mii_ioctl_data *data = if_mii(ifr);
if (down_interruptible(&priv->proc_sem))
return -ERESTARTSYS;
- /* assume success */
- rc = 0;
switch (cmd) {
/* Get address of MII PHY in use. */
case SIOCGMIIPHY:
^ permalink raw reply related
* [PATCH 3/4] brcmsmac: delete useless variable
From: Julia Lawall @ 2014-01-13 16:17 UTC (permalink / raw)
To: Brett Rudley
Cc: kernel-janitors, Arend van Spriel, Franky (Zhenhui) Lin,
Hante Meuleman, John W. Linville, linux-wireless,
brcm80211-dev-list, netdev, linux-kernel
In-Reply-To: <1389629847-5330-1-git-send-email-Julia.Lawall@lip6.fr>
From: Julia Lawall <Julia.Lawall@lip6.fr>
Delete a variable that is at most only assigned to a constant, but never
used otherwise.
A simplified version of the semantic patch that fixes this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
type T;
identifier i;
constant c;
@@
-T i;
<... when != i
-i = c;
...>
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
---
I don't know whether the comment before the removed assignment should also
be adjusted.
drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index 8138f1c..9417cb5 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -7108,7 +7108,6 @@ prep_mac80211_status(struct brcms_c_info *wlc, struct d11rxhdr *rxh,
struct sk_buff *p,
struct ieee80211_rx_status *rx_status)
{
- int preamble;
int channel;
u32 rspec;
unsigned char *plcp;
@@ -7191,7 +7190,6 @@ prep_mac80211_status(struct brcms_c_info *wlc, struct d11rxhdr *rxh,
rx_status->rate_idx -= BRCMS_LEGACY_5G_RATE_OFFSET;
/* Determine short preamble and rate_idx */
- preamble = 0;
if (is_cck_rate(rspec)) {
if (rxh->PhyRxStatus_0 & PRXS0_SHORTH)
rx_status->flag |= RX_FLAG_SHORTPRE;
^ permalink raw reply related
* Re: [PATCH net-next] IPv6: enable bind() to assign an anycast address
From: François-Xavier Le Bail @ 2014-01-13 16:43 UTC (permalink / raw)
To: netdev
Cc: Hannes Frederic Sowa, David S. Miller, Alexey Kuznetsov,
James Morris, Hideaki Yoshifuji, Patrick McHardy,
Francois-Xavier Le Bail
In-Reply-To: <1389377544-3119-1-git-send-email-fx.lebail@yahoo.com>
On Fri, 1/10/14, Francois-Xavier Le Bail <fx.lebail@yahoo.com> wrote:
> - Add ipv6_chk_acast_addr_src() to check if an anycast address is link-local
> on given interface or is global (on any interface).
> - Use it in inet6_bind().
>
> Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com>
> ---
I will divide this patch in 2 patches : one for adding ipv6_chk_acast_addr_src(), one (v2) for updating bind().
^ permalink raw reply
* Re: [RFC net] tcp: metrics: Avoid duplicate entries with the same destination-IP
From: Eric Dumazet @ 2014-01-13 16:47 UTC (permalink / raw)
To: Christoph Paasch; +Cc: netdev, David Miller
In-Reply-To: <1389626736-3143-1-git-send-email-christoph.paasch@uclouvain.be>
On Mon, 2014-01-13 at 16:25 +0100, Christoph Paasch wrote:
> Another solution might be to leave tcp_get_metrics() as it is, and in
> tcpm_new do another call to __tcp_get_metrics() while holding the
> spin-lock. We would then check __tcp_get_metrics twice for new entries
> but we won't hold the spin-lock needlessly anymore.
This is the only solution if you want to fix this.
Cost of lookup are the cache line misses.
Avoiding the spinlock is a must.
The second 'lookup' is basically free, as the first one have populated
cpu caches.
^ permalink raw reply
* Re: [PATCH 0/2] tun: add the RFS support
From: Tom Herbert @ 2014-01-13 16:49 UTC (permalink / raw)
To: Zhi Yong Wu; +Cc: David Miller, Linux Netdev List, Eric Dumazet, Zhi Yong Wu
In-Reply-To: <CAEH94LjdMyZ_SVf5YvzqEhPzYanFQUwLsm+e8Hp_Y5XU4_hkeA@mail.gmail.com>
On Mon, Jan 13, 2014 at 5:29 AM, Zhi Yong Wu <zwu.kernel@gmail.com> wrote:
> On Wed, Jan 1, 2014 at 6:33 AM, Tom Herbert <therbert@google.com> wrote:
>> Zhi,
> HI, Tom
>>
>> Thanks for following up on these patches. It would still be nice to
>> have performance numbers to show the impact. These will be helpful for
>> the next task of integrating RFS into virtio-net.
> I don't get why RFS need to be integrated into virtio-net since
> virtio-net has supported mq. Can you give some clue? thanks.
>
In this case RFS would be the mechanism for selecting the RX queue. We
can either use the tun approach which is to match the RX queue to the
TX queue for a flow, or expose it as accelerated RFS to the guest.
Fine grained control of the queue selection should have value.
>>
>> Tom
>>
>> On Tue, Dec 31, 2013 at 10:32 AM, David Miller <davem@davemloft.net> wrote:
>>> From: Zhi Yong Wu <zwu.kernel@gmail.com>
>>> Date: Sun, 22 Dec 2013 18:54:30 +0800
>>>
>>>> Since Tom Herbert's hash related patchset was modified and got merged,
>>>> his pachset about adding support for RFS on tun flows also need to get
>>>> adjusted accordingly. I tried to update them, and before i will start
>>>> to do some perf tests, i hope to get one correct code base, so it's time
>>>> to post them out now. Any constructive comments are welcome, thanks.
>>>
>>> Series applied to net-next, thanks.
>
>
>
> --
> Regards,
>
> Zhi Yong Wu
^ permalink raw reply
* Re: [PATCH] sh_eth: fix garbled TX error message
From: Joe Perches @ 2014-01-13 16:51 UTC (permalink / raw)
To: Sergei Shtylyov; +Cc: Simon Horman, netdev, linux-sh
In-Reply-To: <52D41117.3040809@cogentembedded.com>
On Mon, 2014-01-13 at 20:15 +0400, Sergei Shtylyov wrote:
> On 13-012014 5:24, Joe Perches wrote:
> >>> sh_eth_error() in case of a TX error tries to print a message using 2 dev_err()
> >>> calls with the first string not finished by '\n', so that the resulting message
> >>> would inevitably come out garbled, with something like "3net eth0: " inserted
> >>> in the middle. Avoid that by merging 2 calls into one.
>
> > I believe this interleaving should not happen since
> > commit e28d713704117bca0820c732210df6075b09f13b
> > (2.6.31 days)
>
> I believe you have given me the wrong commit, which has nothing to do the
> the newline problem per se. It just adds KERN_DEFAULT. I was able to find the
> correct commit though: it's the parent of the commit you cited,
Yeah, I was just scanning the printk commit logs
and looked for the first one that said something
like force newline.
> I should have tested my assumption beforehand...
Always a good thing.
> (I'd like to merge these
> dev_err() calls still though).
Yes, the dev_err calls should be merged.
About the other stuff, what/when ever...
cheers, Joe
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox