* [PATCH net-next 06/13] net/mlx4_en: Use PTYS register to query ethtool settings
From: Amir Vadai @ 2014-10-27 9:37 UTC (permalink / raw)
To: David S. Miller
Cc: netdev, Yevgeny Petrilin, Or Gerlitz, Amir Vadai, Saeed Mahameed
In-Reply-To: <1414402667-8841-1-git-send-email-amirv@mellanox.com>
From: Saeed Mahameed <saeedm@mellanox.com>
- If dev cap MLX4_DEV_CAP_FLAG2_ETH_PROT_CTRL is ON, query PTYS register to fill ethtool settings.
else use default values.
- Use autoneg port cap and dev backplane autoneg cap to reprort autoneg interface capbilities.
- Fix typo in mlx4_en_port_state struct field (transciver to transceiver).
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 311 +++++++++++++++++++++++-
drivers/net/ethernet/mellanox/mlx4/en_port.c | 9 +-
drivers/net/ethernet/mellanox/mlx4/en_port.h | 26 +-
drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 8 +-
4 files changed, 338 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
index 279f423..64b6743 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -375,7 +375,277 @@ static void mlx4_en_get_strings(struct net_device *dev,
}
}
-static int mlx4_en_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+static u32 mlx4_en_autoneg_get(struct net_device *dev)
+{
+ struct mlx4_en_priv *priv = netdev_priv(dev);
+ struct mlx4_en_dev *mdev = priv->mdev;
+ u32 autoneg = AUTONEG_DISABLE;
+
+ if ((mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_ETH_BACKPL_AN_REP) &&
+ (priv->port_state.flags & MLX4_EN_PORT_ANE))
+ autoneg = AUTONEG_ENABLE;
+
+ return autoneg;
+}
+
+static u32 ptys_get_supported_port(struct mlx4_ptys_reg *ptys_reg)
+{
+ u32 eth_proto = be32_to_cpu(ptys_reg->eth_proto_cap);
+
+ if (eth_proto & (MLX4_PROT_MASK(MLX4_10GBASE_T)
+ | MLX4_PROT_MASK(MLX4_1000BASE_T)
+ | MLX4_PROT_MASK(MLX4_100BASE_TX))) {
+ return SUPPORTED_TP;
+ }
+
+ if (eth_proto & (MLX4_PROT_MASK(MLX4_10GBASE_CR)
+ | MLX4_PROT_MASK(MLX4_10GBASE_SR)
+ | MLX4_PROT_MASK(MLX4_56GBASE_SR4)
+ | MLX4_PROT_MASK(MLX4_40GBASE_CR4)
+ | MLX4_PROT_MASK(MLX4_40GBASE_SR4)
+ | MLX4_PROT_MASK(MLX4_1000BASE_CX_SGMII))) {
+ return SUPPORTED_FIBRE;
+ }
+
+ if (eth_proto & (MLX4_PROT_MASK(MLX4_56GBASE_KR4)
+ | MLX4_PROT_MASK(MLX4_40GBASE_KR4)
+ | MLX4_PROT_MASK(MLX4_20GBASE_KR2)
+ | MLX4_PROT_MASK(MLX4_10GBASE_KR)
+ | MLX4_PROT_MASK(MLX4_10GBASE_KX4)
+ | MLX4_PROT_MASK(MLX4_1000BASE_KX))) {
+ return SUPPORTED_Backplane;
+ }
+ return 0;
+}
+
+static u32 ptys_get_active_port(struct mlx4_ptys_reg *ptys_reg)
+{
+ u32 eth_proto = be32_to_cpu(ptys_reg->eth_proto_oper);
+
+ if (!eth_proto) /* link down */
+ eth_proto = be32_to_cpu(ptys_reg->eth_proto_cap);
+
+ if (eth_proto & (MLX4_PROT_MASK(MLX4_10GBASE_T)
+ | MLX4_PROT_MASK(MLX4_1000BASE_T)
+ | MLX4_PROT_MASK(MLX4_100BASE_TX))) {
+ return PORT_TP;
+ }
+
+ if (eth_proto & (MLX4_PROT_MASK(MLX4_10GBASE_SR)
+ | MLX4_PROT_MASK(MLX4_56GBASE_SR4)
+ | MLX4_PROT_MASK(MLX4_40GBASE_SR4)
+ | MLX4_PROT_MASK(MLX4_1000BASE_CX_SGMII))) {
+ return PORT_FIBRE;
+ }
+
+ if (eth_proto & (MLX4_PROT_MASK(MLX4_10GBASE_CR)
+ | MLX4_PROT_MASK(MLX4_56GBASE_CR4)
+ | MLX4_PROT_MASK(MLX4_40GBASE_CR4))) {
+ return PORT_DA;
+ }
+
+ if (eth_proto & (MLX4_PROT_MASK(MLX4_56GBASE_KR4)
+ | MLX4_PROT_MASK(MLX4_40GBASE_KR4)
+ | MLX4_PROT_MASK(MLX4_20GBASE_KR2)
+ | MLX4_PROT_MASK(MLX4_10GBASE_KR)
+ | MLX4_PROT_MASK(MLX4_10GBASE_KX4)
+ | MLX4_PROT_MASK(MLX4_1000BASE_KX))) {
+ return PORT_NONE;
+ }
+ return PORT_OTHER;
+}
+
+#define MLX4_LINK_MODES_SZ \
+ (FIELD_SIZEOF(struct mlx4_ptys_reg, eth_proto_cap) * 8)
+
+enum ethtool_report {
+ SUPPORTED = 0,
+ ADVERTISED = 1,
+ SPEED = 2
+};
+
+/* Translates mlx4 link mode to equivalent ethtool Link modes/speed */
+static u32 ptys2ethtool_map[MLX4_LINK_MODES_SZ][3] = {
+ [MLX4_100BASE_TX] = {
+ SUPPORTED_100baseT_Full,
+ ADVERTISED_100baseT_Full,
+ SPEED_100
+ },
+
+ [MLX4_1000BASE_T] = {
+ SUPPORTED_1000baseT_Full,
+ ADVERTISED_1000baseT_Full,
+ SPEED_1000
+ },
+ [MLX4_1000BASE_CX_SGMII] = {
+ SUPPORTED_1000baseKX_Full,
+ ADVERTISED_1000baseKX_Full,
+ SPEED_1000
+ },
+ [MLX4_1000BASE_KX] = {
+ SUPPORTED_1000baseKX_Full,
+ ADVERTISED_1000baseKX_Full,
+ SPEED_1000
+ },
+
+ [MLX4_10GBASE_T] = {
+ SUPPORTED_10000baseT_Full,
+ ADVERTISED_10000baseT_Full,
+ SPEED_10000
+ },
+ [MLX4_10GBASE_CX4] = {
+ SUPPORTED_10000baseKX4_Full,
+ ADVERTISED_10000baseKX4_Full,
+ SPEED_10000
+ },
+ [MLX4_10GBASE_KX4] = {
+ SUPPORTED_10000baseKX4_Full,
+ ADVERTISED_10000baseKX4_Full,
+ SPEED_10000
+ },
+ [MLX4_10GBASE_KR] = {
+ SUPPORTED_10000baseKR_Full,
+ ADVERTISED_10000baseKR_Full,
+ SPEED_10000
+ },
+ [MLX4_10GBASE_CR] = {
+ SUPPORTED_10000baseKR_Full,
+ ADVERTISED_10000baseKR_Full,
+ SPEED_10000
+ },
+ [MLX4_10GBASE_SR] = {
+ SUPPORTED_10000baseKR_Full,
+ ADVERTISED_10000baseKR_Full,
+ SPEED_10000
+ },
+
+ [MLX4_20GBASE_KR2] = {
+ SUPPORTED_20000baseMLD2_Full | SUPPORTED_20000baseKR2_Full,
+ ADVERTISED_20000baseMLD2_Full | ADVERTISED_20000baseKR2_Full,
+ SPEED_20000
+ },
+
+ [MLX4_40GBASE_CR4] = {
+ SUPPORTED_40000baseCR4_Full,
+ ADVERTISED_40000baseCR4_Full,
+ SPEED_40000
+ },
+ [MLX4_40GBASE_KR4] = {
+ SUPPORTED_40000baseKR4_Full,
+ ADVERTISED_40000baseKR4_Full,
+ SPEED_40000
+ },
+ [MLX4_40GBASE_SR4] = {
+ SUPPORTED_40000baseSR4_Full,
+ ADVERTISED_40000baseSR4_Full,
+ SPEED_40000
+ },
+
+ [MLX4_56GBASE_KR4] = {
+ SUPPORTED_56000baseKR4_Full,
+ ADVERTISED_56000baseKR4_Full,
+ SPEED_56000
+ },
+ [MLX4_56GBASE_CR4] = {
+ SUPPORTED_56000baseCR4_Full,
+ ADVERTISED_56000baseCR4_Full,
+ SPEED_56000
+ },
+ [MLX4_56GBASE_SR4] = {
+ SUPPORTED_56000baseSR4_Full,
+ ADVERTISED_56000baseSR4_Full,
+ SPEED_56000
+ },
+};
+
+static u32 ptys2ethtool_link_modes(u32 eth_proto, enum ethtool_report report)
+{
+ int i;
+ u32 link_modes = 0;
+
+ for (i = 0; i < MLX4_LINK_MODES_SZ; i++) {
+ if (eth_proto & MLX4_PROT_MASK(i))
+ link_modes |= ptys2ethtool_map[i][report];
+ }
+ return link_modes;
+}
+
+static int ethtool_get_ptys_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
+{
+ struct mlx4_en_priv *priv = netdev_priv(dev);
+ struct mlx4_ptys_reg ptys_reg;
+ u32 eth_proto;
+ int ret;
+
+ memset(&ptys_reg, 0, sizeof(ptys_reg));
+ ptys_reg.local_port = priv->port;
+ ptys_reg.proto_mask = MLX4_PTYS_EN;
+ ret = mlx4_ACCESS_PTYS_REG(priv->mdev->dev,
+ MLX4_ACCESS_REG_QUERY, &ptys_reg);
+ if (ret) {
+ en_warn(priv, "Failed to run mlx4_ACCESS_PTYS_REG status(%x)",
+ ret);
+ return ret;
+ }
+ en_dbg(DRV, priv, "ptys_reg.proto_mask %x\n",
+ ptys_reg.proto_mask);
+ en_dbg(DRV, priv, "ptys_reg.eth_proto_cap %x\n",
+ be32_to_cpu(ptys_reg.eth_proto_cap));
+ en_dbg(DRV, priv, "ptys_reg.eth_proto_admin %x\n",
+ be32_to_cpu(ptys_reg.eth_proto_admin));
+ en_dbg(DRV, priv, "ptys_reg.eth_proto_oper %x\n",
+ be32_to_cpu(ptys_reg.eth_proto_oper));
+ en_dbg(DRV, priv, "ptys_reg.eth_proto_lp_adv %x\n",
+ be32_to_cpu(ptys_reg.eth_proto_lp_adv));
+
+ cmd->supported = 0;
+ cmd->advertising = 0;
+
+ cmd->supported |= ptys_get_supported_port(&ptys_reg);
+
+ eth_proto = be32_to_cpu(ptys_reg.eth_proto_cap);
+ cmd->supported |= ptys2ethtool_link_modes(eth_proto, SUPPORTED);
+
+ eth_proto = be32_to_cpu(ptys_reg.eth_proto_admin);
+ cmd->advertising |= ptys2ethtool_link_modes(eth_proto, ADVERTISED);
+
+ cmd->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
+ cmd->advertising |= (priv->prof->tx_pause) ? ADVERTISED_Pause : 0;
+
+ cmd->advertising |= (priv->prof->tx_pause ^ priv->prof->rx_pause) ?
+ ADVERTISED_Asym_Pause : 0;
+
+ cmd->port = ptys_get_active_port(&ptys_reg);
+ cmd->transceiver = (SUPPORTED_TP & cmd->supported) ?
+ XCVR_EXTERNAL : XCVR_INTERNAL;
+
+ if (mlx4_en_autoneg_get(dev)) {
+ cmd->supported |= SUPPORTED_Autoneg;
+ cmd->advertising |= ADVERTISED_Autoneg;
+ }
+
+ cmd->autoneg = (priv->port_state.flags & MLX4_EN_PORT_ANC) ?
+ AUTONEG_ENABLE : AUTONEG_DISABLE;
+
+ eth_proto = be32_to_cpu(ptys_reg.eth_proto_lp_adv);
+ cmd->lp_advertising = ptys2ethtool_link_modes(eth_proto, ADVERTISED);
+
+ cmd->lp_advertising |= (priv->port_state.flags & MLX4_EN_PORT_ANC) ?
+ ADVERTISED_Autoneg : 0;
+
+ cmd->phy_address = 0;
+ cmd->mdio_support = 0;
+ cmd->maxtxpkt = 0;
+ cmd->maxrxpkt = 0;
+ cmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
+ cmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
+
+ return ret;
+}
+
+static void ethtool_get_default_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
int trans_type;
@@ -383,18 +653,7 @@ static int mlx4_en_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->autoneg = AUTONEG_DISABLE;
cmd->supported = SUPPORTED_10000baseT_Full;
cmd->advertising = ADVERTISED_10000baseT_Full;
-
- if (mlx4_en_QUERY_PORT(priv->mdev, priv->port))
- return -ENOMEM;
-
- trans_type = priv->port_state.transciver;
- if (netif_carrier_ok(dev)) {
- ethtool_cmd_speed_set(cmd, priv->port_state.link_speed);
- cmd->duplex = DUPLEX_FULL;
- } else {
- ethtool_cmd_speed_set(cmd, SPEED_UNKNOWN);
- cmd->duplex = DUPLEX_UNKNOWN;
- }
+ trans_type = priv->port_state.transceiver;
if (trans_type > 0 && trans_type <= 0xC) {
cmd->port = PORT_FIBRE;
@@ -410,6 +669,32 @@ static int mlx4_en_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->port = -1;
cmd->transceiver = -1;
}
+}
+
+static int mlx4_en_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct mlx4_en_priv *priv = netdev_priv(dev);
+ int ret = -EINVAL;
+
+ if (mlx4_en_QUERY_PORT(priv->mdev, priv->port))
+ return -ENOMEM;
+
+ en_dbg(DRV, priv, "query port state.flags ANC(%x) ANE(%x)\n",
+ priv->port_state.flags & MLX4_EN_PORT_ANC,
+ priv->port_state.flags & MLX4_EN_PORT_ANE);
+
+ if (priv->mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_ETH_PROT_CTRL)
+ ret = ethtool_get_ptys_settings(dev, cmd);
+ if (ret) /* ETH PROT CRTL is not supported or PTYS CMD failed */
+ ethtool_get_default_settings(dev, cmd);
+
+ if (netif_carrier_ok(dev)) {
+ ethtool_cmd_speed_set(cmd, priv->port_state.link_speed);
+ cmd->duplex = DUPLEX_FULL;
+ } else {
+ ethtool_cmd_speed_set(cmd, SPEED_UNKNOWN);
+ cmd->duplex = DUPLEX_UNKNOWN;
+ }
return 0;
}
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_port.c b/drivers/net/ethernet/mellanox/mlx4/en_port.c
index afd3036..134b12e 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_port.c
@@ -114,7 +114,14 @@ int mlx4_en_QUERY_PORT(struct mlx4_en_dev *mdev, u8 port)
state->link_speed = -1;
break;
}
- state->transciver = qport_context->transceiver;
+
+ state->transceiver = qport_context->transceiver;
+
+ state->flags = 0; /* Reset and recalculate the port flags */
+ state->flags |= (qport_context->link_up & MLX4_EN_ANC_MASK) ?
+ MLX4_EN_PORT_ANC : 0;
+ state->flags |= (qport_context->autoneg & MLX4_EN_AUTONEG_MASK) ?
+ MLX4_EN_PORT_ANE : 0;
out:
mlx4_free_cmd_mailbox(mdev->dev, mailbox);
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_port.h b/drivers/net/ethernet/mellanox/mlx4/en_port.h
index a5fc93b..040da4b 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_port.h
+++ b/drivers/net/ethernet/mellanox/mlx4/en_port.h
@@ -53,6 +53,28 @@ enum {
MLX4_MCAST_ENABLE = 2,
};
+enum mlx4_link_mode {
+ MLX4_1000BASE_CX_SGMII = 0,
+ MLX4_1000BASE_KX = 1,
+ MLX4_10GBASE_CX4 = 2,
+ MLX4_10GBASE_KX4 = 3,
+ MLX4_10GBASE_KR = 4,
+ MLX4_20GBASE_KR2 = 5,
+ MLX4_40GBASE_CR4 = 6,
+ MLX4_40GBASE_KR4 = 7,
+ MLX4_56GBASE_KR4 = 8,
+ MLX4_10GBASE_CR = 12,
+ MLX4_10GBASE_SR = 13,
+ MLX4_40GBASE_SR4 = 15,
+ MLX4_56GBASE_CR4 = 17,
+ MLX4_56GBASE_SR4 = 18,
+ MLX4_100BASE_TX = 24,
+ MLX4_1000BASE_T = 25,
+ MLX4_10GBASE_T = 26,
+};
+
+#define MLX4_PROT_MASK(link_mode) (1<<link_mode)
+
enum {
MLX4_EN_100M_SPEED = 0x04,
MLX4_EN_10G_SPEED_XAUI = 0x00,
@@ -67,7 +89,9 @@ enum {
struct mlx4_en_query_port_context {
u8 link_up;
#define MLX4_EN_LINK_UP_MASK 0x80
- u8 reserved;
+#define MLX4_EN_ANC_MASK 0x40
+ u8 autoneg;
+#define MLX4_EN_AUTONEG_MASK 0x80
__be16 mtu;
u8 reserved2;
u8 link_speed;
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 8fef658..946754e 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -421,10 +421,16 @@ struct mlx4_en_rss_map {
enum mlx4_qp_state indir_state;
};
+enum mlx4_en_port_flag {
+ MLX4_EN_PORT_ANC = 1<<0, /* Auto-negotiation complete */
+ MLX4_EN_PORT_ANE = 1<<1, /* Auto-negotiation enabled */
+};
+
struct mlx4_en_port_state {
int link_state;
int link_speed;
- int transciver;
+ int transceiver;
+ u32 flags;
};
struct mlx4_en_pkt_stats {
--
1.8.3.4
^ permalink raw reply related
* [PATCH net-next 04/13] net/mlx4_core: Add ethernet backplane autoneg device capability
From: Amir Vadai @ 2014-10-27 9:37 UTC (permalink / raw)
To: David S. Miller
Cc: netdev, Yevgeny Petrilin, Or Gerlitz, Amir Vadai, Saeed Mahameed
In-Reply-To: <1414402667-8841-1-git-send-email-amirv@mellanox.com>
From: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx4/fw.c | 7 ++++++-
include/linux/mlx4/device.h | 3 ++-
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 6fd9b85..72289ef 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -140,7 +140,8 @@ static void dump_dev_cap_flags2(struct mlx4_dev *dev, u64 flags)
[11] = "MAD DEMUX (Secure-Host) support",
[12] = "Large cache line (>64B) CQE stride support",
[13] = "Large cache line (>64B) EQE stride support",
- [14] = "Ethernet protocol control support"
+ [14] = "Ethernet protocol control support",
+ [15] = "Ethernet Backplane autoneg support"
};
int i;
@@ -575,6 +576,7 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
#define QUERY_DEV_CAP_BMME_FLAGS_OFFSET 0x94
#define QUERY_DEV_CAP_RSVD_LKEY_OFFSET 0x98
#define QUERY_DEV_CAP_MAX_ICM_SZ_OFFSET 0xa0
+#define QUERY_DEV_CAP_ETH_BACKPL_OFFSET 0x9c
#define QUERY_DEV_CAP_FW_REASSIGN_MAC 0x9d
#define QUERY_DEV_CAP_VXLAN 0x9e
#define QUERY_DEV_CAP_MAD_DEMUX_OFFSET 0xb0
@@ -749,6 +751,9 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
QUERY_DEV_CAP_BMME_FLAGS_OFFSET);
MLX4_GET(dev_cap->reserved_lkey, outbox,
QUERY_DEV_CAP_RSVD_LKEY_OFFSET);
+ MLX4_GET(field32, outbox, QUERY_DEV_CAP_ETH_BACKPL_OFFSET);
+ if (field32 & (1 << 0))
+ dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_ETH_BACKPL_AN_REP;
MLX4_GET(field, outbox, QUERY_DEV_CAP_FW_REASSIGN_MAC);
if (field & 1<<6)
dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_REASSIGN_MAC_EN;
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index 181cd9f..e4c136e 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -187,7 +187,8 @@ enum {
MLX4_DEV_CAP_FLAG2_MAD_DEMUX = 1LL << 11,
MLX4_DEV_CAP_FLAG2_CQE_STRIDE = 1LL << 12,
MLX4_DEV_CAP_FLAG2_EQE_STRIDE = 1LL << 13,
- MLX4_DEV_CAP_FLAG2_ETH_PROT_CTRL = 1LL << 14
+ MLX4_DEV_CAP_FLAG2_ETH_PROT_CTRL = 1LL << 14,
+ MLX4_DEV_CAP_FLAG2_ETH_BACKPL_AN_REP = 1LL << 15
};
enum {
--
1.8.3.4
^ permalink raw reply related
* [PATCH net-next 03/13] net/mlx4_core: Introduce ACCESS_REG CMD and eth_prot_ctrl dev cap
From: Amir Vadai @ 2014-10-27 9:37 UTC (permalink / raw)
To: David S. Miller
Cc: netdev, Yevgeny Petrilin, Or Gerlitz, Amir Vadai, Saeed Mahameed
In-Reply-To: <1414402667-8841-1-git-send-email-amirv@mellanox.com>
From: Saeed Mahameed <saeedm@mellanox.com>
Adding ACCESS REG mlx4 command and use it to implement Query method for
PTYS (Port Type and Speed Register).
Query and store eth_prot_ctrl dev cap.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx4/cmd.c | 9 +++
drivers/net/ethernet/mellanox/mlx4/fw.c | 118 ++++++++++++++++++++++++++++++-
include/linux/mlx4/cmd.h | 2 +
include/linux/mlx4/device.h | 40 ++++++++++-
4 files changed, 166 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/cmd.c b/drivers/net/ethernet/mellanox/mlx4/cmd.c
index b16e1b9..916459e 100644
--- a/drivers/net/ethernet/mellanox/mlx4/cmd.c
+++ b/drivers/net/ethernet/mellanox/mlx4/cmd.c
@@ -1338,6 +1338,15 @@ static struct mlx4_cmd_info cmd_info[] = {
.verify = NULL,
.wrapper = mlx4_QUERY_IF_STAT_wrapper
},
+ {
+ .opcode = MLX4_CMD_ACCESS_REG,
+ .has_inbox = true,
+ .has_outbox = true,
+ .out_is_imm = false,
+ .encode_slave_id = false,
+ .verify = NULL,
+ .wrapper = NULL,
+ },
/* Native multicast commands are not available for guests */
{
.opcode = MLX4_CMD_QP_ATTACH,
diff --git a/drivers/net/ethernet/mellanox/mlx4/fw.c b/drivers/net/ethernet/mellanox/mlx4/fw.c
index 2e88a23..6fd9b85 100644
--- a/drivers/net/ethernet/mellanox/mlx4/fw.c
+++ b/drivers/net/ethernet/mellanox/mlx4/fw.c
@@ -139,7 +139,8 @@ static void dump_dev_cap_flags2(struct mlx4_dev *dev, u64 flags)
[10] = "TCP/IP offloads/flow-steering for VXLAN support",
[11] = "MAD DEMUX (Secure-Host) support",
[12] = "Large cache line (>64B) CQE stride support",
- [13] = "Large cache line (>64B) EQE stride support"
+ [13] = "Large cache line (>64B) EQE stride support",
+ [14] = "Ethernet protocol control support"
};
int i;
@@ -560,6 +561,7 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
#define QUERY_DEV_CAP_FLOW_STEERING_RANGE_EN_OFFSET 0x76
#define QUERY_DEV_CAP_FLOW_STEERING_MAX_QP_OFFSET 0x77
#define QUERY_DEV_CAP_CQ_EQ_CACHE_LINE_STRIDE 0x7a
+#define QUERY_DEV_CAP_ETH_PROT_CTRL_OFFSET 0x7a
#define QUERY_DEV_CAP_RDMARC_ENTRY_SZ_OFFSET 0x80
#define QUERY_DEV_CAP_QPC_ENTRY_SZ_OFFSET 0x82
#define QUERY_DEV_CAP_AUX_ENTRY_SZ_OFFSET 0x84
@@ -737,11 +739,12 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap)
MLX4_GET(size, outbox, QUERY_DEV_CAP_MAX_DESC_SZ_RQ_OFFSET);
dev_cap->max_rq_desc_sz = size;
MLX4_GET(field, outbox, QUERY_DEV_CAP_CQ_EQ_CACHE_LINE_STRIDE);
+ if (field & (1 << 5))
+ dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_ETH_PROT_CTRL;
if (field & (1 << 6))
dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_CQE_STRIDE;
if (field & (1 << 7))
dev_cap->flags2 |= MLX4_DEV_CAP_FLAG2_EQE_STRIDE;
-
MLX4_GET(dev_cap->bmme_flags, outbox,
QUERY_DEV_CAP_BMME_FLAGS_OFFSET);
MLX4_GET(dev_cap->reserved_lkey, outbox,
@@ -2144,3 +2147,114 @@ out:
mlx4_free_cmd_mailbox(dev, mailbox);
return err;
}
+
+/* Access Reg commands */
+enum mlx4_access_reg_masks {
+ MLX4_ACCESS_REG_STATUS_MASK = 0x7f,
+ MLX4_ACCESS_REG_METHOD_MASK = 0x7f,
+ MLX4_ACCESS_REG_LEN_MASK = 0x7ff
+};
+
+struct mlx4_access_reg {
+ __be16 constant1;
+ u8 status;
+ u8 resrvd1;
+ __be16 reg_id;
+ u8 method;
+ u8 constant2;
+ __be32 resrvd2[2];
+ __be16 len_const;
+ __be16 resrvd3;
+#define MLX4_ACCESS_REG_HEADER_SIZE (20)
+ u8 reg_data[MLX4_MAILBOX_SIZE-MLX4_ACCESS_REG_HEADER_SIZE];
+} __attribute__((__packed__));
+
+/**
+ * mlx4_ACCESS_REG - Generic access reg command.
+ * @dev: mlx4_dev.
+ * @reg_id: register ID to access.
+ * @method: Access method Read/Write.
+ * @reg_len: register length to Read/Write in bytes.
+ * @reg_data: reg_data pointer to Read/Write From/To.
+ *
+ * Access ConnectX registers FW command.
+ * Returns 0 on success and copies outbox mlx4_access_reg data
+ * field into reg_data or a negative error code.
+ */
+static int mlx4_ACCESS_REG(struct mlx4_dev *dev, u16 reg_id,
+ enum mlx4_access_reg_method method,
+ u16 reg_len, void *reg_data)
+{
+ struct mlx4_cmd_mailbox *inbox, *outbox;
+ struct mlx4_access_reg *inbuf, *outbuf;
+ int err;
+
+ inbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(inbox))
+ return PTR_ERR(inbox);
+
+ outbox = mlx4_alloc_cmd_mailbox(dev);
+ if (IS_ERR(outbox)) {
+ mlx4_free_cmd_mailbox(dev, inbox);
+ return PTR_ERR(outbox);
+ }
+
+ inbuf = inbox->buf;
+ outbuf = outbox->buf;
+
+ inbuf->constant1 = cpu_to_be16(0x1<<11 | 0x4);
+ inbuf->constant2 = 0x1;
+ inbuf->reg_id = cpu_to_be16(reg_id);
+ inbuf->method = method & MLX4_ACCESS_REG_METHOD_MASK;
+
+ reg_len = min(reg_len, (u16)(sizeof(inbuf->reg_data)));
+ inbuf->len_const =
+ cpu_to_be16(((reg_len/4 + 1) & MLX4_ACCESS_REG_LEN_MASK) |
+ ((0x3) << 12));
+
+ memcpy(inbuf->reg_data, reg_data, reg_len);
+ err = mlx4_cmd_box(dev, inbox->dma, outbox->dma, 0, 0,
+ MLX4_CMD_ACCESS_REG, MLX4_CMD_TIME_CLASS_C,
+ MLX4_CMD_NATIVE);
+ if (err)
+ goto out;
+
+ if (outbuf->status & MLX4_ACCESS_REG_STATUS_MASK) {
+ err = outbuf->status & MLX4_ACCESS_REG_STATUS_MASK;
+ mlx4_err(dev,
+ "MLX4_CMD_ACCESS_REG(%x) returned REG status (%x)\n",
+ reg_id, err);
+ goto out;
+ }
+
+ memcpy(reg_data, outbuf->reg_data, reg_len);
+out:
+ mlx4_free_cmd_mailbox(dev, inbox);
+ mlx4_free_cmd_mailbox(dev, outbox);
+ return err;
+}
+
+/* ConnectX registers IDs */
+enum mlx4_reg_id {
+ MLX4_REG_ID_PTYS = 0x5004,
+};
+
+/**
+ * mlx4_ACCESS_PTYS_REG - Access PTYs (Port Type and Speed)
+ * register
+ * @dev: mlx4_dev.
+ * @method: Access method Read/Write.
+ * @ptys_reg: PTYS register data pointer.
+ *
+ * Access ConnectX PTYS register, to Read/Write Port Type/Speed
+ * configuration
+ * Returns 0 on success or a negative error code.
+ */
+int mlx4_ACCESS_PTYS_REG(struct mlx4_dev *dev,
+ enum mlx4_access_reg_method method,
+ struct mlx4_ptys_reg *ptys_reg)
+{
+ return mlx4_ACCESS_REG(dev, MLX4_REG_ID_PTYS,
+ method, sizeof(*ptys_reg), ptys_reg);
+}
+EXPORT_SYMBOL_GPL(mlx4_ACCESS_PTYS_REG);
diff --git a/include/linux/mlx4/cmd.h b/include/linux/mlx4/cmd.h
index 379c026..ff5f5de 100644
--- a/include/linux/mlx4/cmd.h
+++ b/include/linux/mlx4/cmd.h
@@ -67,6 +67,8 @@ enum {
MLX4_CMD_MAP_ICM_AUX = 0xffc,
MLX4_CMD_UNMAP_ICM_AUX = 0xffb,
MLX4_CMD_SET_ICM_SIZE = 0xffd,
+ MLX4_CMD_ACCESS_REG = 0x3b,
+
/*master notify fw on finish for slave's flr*/
MLX4_CMD_INFORM_FLR_DONE = 0x5b,
MLX4_CMD_GET_OP_REQ = 0x59,
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index 73910da..181cd9f 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -186,7 +186,8 @@ enum {
MLX4_DEV_CAP_FLAG2_VXLAN_OFFLOADS = 1LL << 10,
MLX4_DEV_CAP_FLAG2_MAD_DEMUX = 1LL << 11,
MLX4_DEV_CAP_FLAG2_CQE_STRIDE = 1LL << 12,
- MLX4_DEV_CAP_FLAG2_EQE_STRIDE = 1LL << 13
+ MLX4_DEV_CAP_FLAG2_EQE_STRIDE = 1LL << 13,
+ MLX4_DEV_CAP_FLAG2_ETH_PROT_CTRL = 1LL << 14
};
enum {
@@ -1319,4 +1320,41 @@ static inline bool mlx4_low_memory_profile(void)
return is_kdump_kernel();
}
+/* ACCESS REG commands */
+enum mlx4_access_reg_method {
+ MLX4_ACCESS_REG_QUERY = 0x1,
+ MLX4_ACCESS_REG_WRITE = 0x2,
+};
+
+/* ACCESS PTYS Reg command */
+enum mlx4_ptys_proto {
+ MLX4_PTYS_IB = 1<<0,
+ MLX4_PTYS_EN = 1<<2,
+};
+
+struct mlx4_ptys_reg {
+ u8 resrvd1;
+ u8 local_port;
+ u8 resrvd2;
+ u8 proto_mask;
+ __be32 resrvd3[2];
+ __be32 eth_proto_cap;
+ __be16 ib_width_cap;
+ __be16 ib_speed_cap;
+ __be32 resrvd4;
+ __be32 eth_proto_admin;
+ __be16 ib_width_admin;
+ __be16 ib_speed_admin;
+ __be32 resrvd5;
+ __be32 eth_proto_oper;
+ __be16 ib_width_oper;
+ __be16 ib_speed_oper;
+ __be32 resrvd6;
+ __be32 eth_proto_lp_adv;
+} __packed;
+
+int mlx4_ACCESS_PTYS_REG(struct mlx4_dev *dev,
+ enum mlx4_access_reg_method method,
+ struct mlx4_ptys_reg *ptys_reg);
+
#endif /* MLX4_DEVICE_H */
--
1.8.3.4
^ permalink raw reply related
* [PATCH net-next 08/13] net/mlx4_en: Add support for setting rxvlan offload OFF/ON
From: Amir Vadai @ 2014-10-27 9:37 UTC (permalink / raw)
To: David S. Miller
Cc: netdev, Yevgeny Petrilin, Or Gerlitz, Amir Vadai, Saeed Mahameed
In-Reply-To: <1414402667-8841-1-git-send-email-amirv@mellanox.com>
From: Saeed Mahameed <saeedm@mellanox.com>
Rename mlx4_en_timestamp_config to mlx4_en_reset_config and extend it to support
choosing RX vlan offload configuration.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx4/en_clock.c | 53 ++++++++++++++++++++------
drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 2 +-
drivers/net/ethernet/mellanox/mlx4/mlx4_en.h | 10 +++--
3 files changed, 50 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_clock.c b/drivers/net/ethernet/mellanox/mlx4/en_clock.c
index 57dda95..285fccf 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_clock.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_clock.c
@@ -35,16 +35,26 @@
#include "mlx4_en.h"
-int mlx4_en_timestamp_config(struct net_device *dev, int tx_type, int rx_filter)
+int mlx4_en_reset_config(struct net_device *dev,
+ struct hwtstamp_config ts_config,
+ netdev_features_t features)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
struct mlx4_en_dev *mdev = priv->mdev;
int port_up = 0;
int err = 0;
- if (priv->hwtstamp_config.tx_type == tx_type &&
- priv->hwtstamp_config.rx_filter == rx_filter)
- return 0;
+ if (priv->hwtstamp_config.tx_type == ts_config.tx_type &&
+ priv->hwtstamp_config.rx_filter == ts_config.rx_filter &&
+ !DEV_FEATURE_CHANGED(dev, features, NETIF_F_HW_VLAN_CTAG_RX))
+ return 0; /* Nothing to change */
+
+ if (DEV_FEATURE_CHANGED(dev, features, NETIF_F_HW_VLAN_CTAG_RX) &&
+ (features & NETIF_F_HW_VLAN_CTAG_RX) &&
+ (priv->hwtstamp_config.rx_filter != HWTSTAMP_FILTER_NONE)) {
+ en_warn(priv, "Can't turn ON rx vlan offload while time-stamping rx filter is ON\n");
+ return -EINVAL;
+ }
mutex_lock(&mdev->state_lock);
if (priv->port_up) {
@@ -54,15 +64,36 @@ int mlx4_en_timestamp_config(struct net_device *dev, int tx_type, int rx_filter)
mlx4_en_free_resources(priv);
- en_warn(priv, "Changing Time Stamp configuration\n");
-
- priv->hwtstamp_config.tx_type = tx_type;
- priv->hwtstamp_config.rx_filter = rx_filter;
+ en_warn(priv, "Changing device configuration rx filter(%x) rx vlan(%x)\n",
+ ts_config.rx_filter, !!(features & NETIF_F_HW_VLAN_CTAG_RX));
+
+ priv->hwtstamp_config.tx_type = ts_config.tx_type;
+ priv->hwtstamp_config.rx_filter = ts_config.rx_filter;
+
+ if (DEV_FEATURE_CHANGED(dev, features, NETIF_F_HW_VLAN_CTAG_RX)) {
+ if (features & NETIF_F_HW_VLAN_CTAG_RX)
+ dev->features |= NETIF_F_HW_VLAN_CTAG_RX;
+ else
+ dev->features &= ~NETIF_F_HW_VLAN_CTAG_RX;
+ } else if (ts_config.rx_filter == HWTSTAMP_FILTER_NONE) {
+ /* RX time-stamping is OFF, update the RX vlan offload
+ * to the latest wanted state
+ */
+ if (dev->wanted_features & NETIF_F_HW_VLAN_CTAG_RX)
+ dev->features |= NETIF_F_HW_VLAN_CTAG_RX;
+ else
+ dev->features &= ~NETIF_F_HW_VLAN_CTAG_RX;
+ }
- if (rx_filter != HWTSTAMP_FILTER_NONE)
+ /* RX vlan offload and RX time-stamping can't co-exist !
+ * Regardless of the caller's choice,
+ * Turn Off RX vlan offload in case of time-stamping is ON
+ */
+ if (ts_config.rx_filter != HWTSTAMP_FILTER_NONE) {
+ if (dev->features & NETIF_F_HW_VLAN_CTAG_RX)
+ en_warn(priv, "Turning off RX vlan offload since RX time-stamping is ON\n");
dev->features &= ~NETIF_F_HW_VLAN_CTAG_RX;
- else
- dev->features |= NETIF_F_HW_VLAN_CTAG_RX;
+ }
err = mlx4_en_alloc_resources(priv);
if (err) {
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index f3032fe..c4bd2c7 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -2157,7 +2157,7 @@ static int mlx4_en_hwtstamp_set(struct net_device *dev, struct ifreq *ifr)
return -ERANGE;
}
- if (mlx4_en_timestamp_config(dev, config.tx_type, config.rx_filter)) {
+ if (mlx4_en_reset_config(dev, config, dev->features)) {
config.tx_type = HWTSTAMP_TX_OFF;
config.rx_filter = HWTSTAMP_FILTER_NONE;
}
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
index 946754e..6beb4d3 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4_en.h
@@ -835,6 +835,13 @@ void mlx4_en_cleanup_filters(struct mlx4_en_priv *priv);
void mlx4_en_ex_selftest(struct net_device *dev, u32 *flags, u64 *buf);
void mlx4_en_ptp_overflow_check(struct mlx4_en_dev *mdev);
+#define DEV_FEATURE_CHANGED(dev, new_features, feature) \
+ ((dev->features & feature) ^ (new_features & feature))
+
+int mlx4_en_reset_config(struct net_device *dev,
+ struct hwtstamp_config ts_config,
+ netdev_features_t new_features);
+
/*
* Functions for time stamping
*/
@@ -844,9 +851,6 @@ void mlx4_en_fill_hwtstamps(struct mlx4_en_dev *mdev,
u64 timestamp);
void mlx4_en_init_timestamp(struct mlx4_en_dev *mdev);
void mlx4_en_remove_timestamp(struct mlx4_en_dev *mdev);
-int mlx4_en_timestamp_config(struct net_device *dev,
- int tx_type,
- int rx_filter);
/* Globals
*/
--
1.8.3.4
^ permalink raw reply related
* [PATCH net-next 02/13] ethtool,net/mlx4_en: Cable info, get_module_info/eeprom ethtool support
From: Amir Vadai @ 2014-10-27 9:37 UTC (permalink / raw)
To: David S. Miller
Cc: netdev, Yevgeny Petrilin, Or Gerlitz, Amir Vadai, Saeed Mahameed
In-Reply-To: <1414402667-8841-1-git-send-email-amirv@mellanox.com>
From: Saeed Mahameed <saeedm@mellanox.com>
Added support for get_module_info/get_module_eeprom ethtool support for cable info reading.
Added new cable types enum in include/uapi/linux/ethtool.h for ethtool use.
+#define ETH_MODULE_SFF_8636 0x3
+#define ETH_MODULE_SFF_8636_LEN 256
+#define ETH_MODULE_SFF_8436 0x4
+#define ETH_MODULE_SFF_8436_LEN 256
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 83 +++++++++++++++++++++++++
include/uapi/linux/ethtool.h | 4 ++
2 files changed, 87 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
index ae83da9..279f423 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -35,6 +35,7 @@
#include <linux/ethtool.h>
#include <linux/netdevice.h>
#include <linux/mlx4/driver.h>
+#include <linux/mlx4/device.h>
#include <linux/in.h>
#include <net/ip.h>
@@ -1309,6 +1310,86 @@ static int mlx4_en_set_tunable(struct net_device *dev,
return ret;
}
+static int mlx4_en_get_module_info(struct net_device *dev,
+ struct ethtool_modinfo *modinfo)
+{
+ struct mlx4_en_priv *priv = netdev_priv(dev);
+ struct mlx4_en_dev *mdev = priv->mdev;
+ int ret;
+ u8 data[4];
+
+ /* Read first 2 bytes to get Module & REV ID */
+ ret = mlx4_get_module_info(mdev->dev, priv->port,
+ 0/*offset*/, 2/*size*/, data);
+ if (ret < 2)
+ return -EIO;
+
+ switch (data[0] /* identifier */) {
+ case MLX4_MODULE_ID_QSFP:
+ modinfo->type = ETH_MODULE_SFF_8436;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
+ break;
+ case MLX4_MODULE_ID_QSFP_PLUS:
+ if (data[1] >= 0x3) { /* revision id */
+ modinfo->type = ETH_MODULE_SFF_8636;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8636_LEN;
+ } else {
+ modinfo->type = ETH_MODULE_SFF_8436;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
+ }
+ break;
+ case MLX4_MODULE_ID_QSFP28:
+ modinfo->type = ETH_MODULE_SFF_8636;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8636_LEN;
+ break;
+ case MLX4_MODULE_ID_SFP:
+ modinfo->type = ETH_MODULE_SFF_8472;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+ break;
+ default:
+ return -ENOSYS;
+ }
+
+ return 0;
+}
+
+static int mlx4_en_get_module_eeprom(struct net_device *dev,
+ struct ethtool_eeprom *ee,
+ u8 *data)
+{
+ struct mlx4_en_priv *priv = netdev_priv(dev);
+ struct mlx4_en_dev *mdev = priv->mdev;
+ int offset = ee->offset;
+ int i = 0, ret;
+
+ if (ee->len == 0)
+ return -EINVAL;
+
+ memset(data, 0, ee->len);
+
+ while (i < ee->len) {
+ en_dbg(DRV, priv,
+ "mlx4_get_module_info i(%d) offset(%d) len(%d)\n",
+ i, offset, ee->len - i);
+
+ ret = mlx4_get_module_info(mdev->dev, priv->port,
+ offset, ee->len - i, data + i);
+
+ if (!ret) /* Done reading */
+ return 0;
+
+ if (ret < 0) {
+ en_err(priv,
+ "mlx4_get_module_info i(%d) offset(%d) bytes_to_read(%d) - FAILED (0x%x)\n",
+ i, offset, ee->len - i, ret);
+ return 0;
+ }
+
+ i += ret;
+ offset += ret;
+ }
+ return 0;
+}
const struct ethtool_ops mlx4_en_ethtool_ops = {
.get_drvinfo = mlx4_en_get_drvinfo,
@@ -1341,6 +1422,8 @@ const struct ethtool_ops mlx4_en_ethtool_ops = {
.get_priv_flags = mlx4_en_get_priv_flags,
.get_tunable = mlx4_en_get_tunable,
.set_tunable = mlx4_en_set_tunable,
+ .get_module_info = mlx4_en_get_module_info,
+ .get_module_eeprom = mlx4_en_get_module_eeprom
};
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index 99b4305..b6acd78 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -1343,6 +1343,10 @@ enum ethtool_sfeatures_retval_bits {
#define ETH_MODULE_SFF_8079_LEN 256
#define ETH_MODULE_SFF_8472 0x2
#define ETH_MODULE_SFF_8472_LEN 512
+#define ETH_MODULE_SFF_8636 0x3
+#define ETH_MODULE_SFF_8636_LEN 256
+#define ETH_MODULE_SFF_8436 0x4
+#define ETH_MODULE_SFF_8436_LEN 256
/* Reset flags */
/* The reset() operation must clear the flags for the components which
--
1.8.3.4
^ permalink raw reply related
* [PATCH net-next 05/13] ethtool,net/mlx4_en: Add 100M, 20G, 56G speeds ethtool reporting support
From: Amir Vadai @ 2014-10-27 9:37 UTC (permalink / raw)
To: David S. Miller
Cc: netdev, Yevgeny Petrilin, Or Gerlitz, Amir Vadai, Saeed Mahameed
In-Reply-To: <1414402667-8841-1-git-send-email-amirv@mellanox.com>
From: Saeed Mahameed <saeedm@mellanox.com>
Added 100M, 20G and 56G ethtool speed reporting support.
Update mlx4_en_test_speed self test with the new speeds.
Defined new link speeds in include/uapi/linux/ethtool.h:
+#define SPEED_20000 20000
+#define SPEED_40000 40000
+#define SPEED_56000 56000
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx4/en_port.c | 15 ++++++++++++---
drivers/net/ethernet/mellanox/mlx4/en_port.h | 9 ++++++---
drivers/net/ethernet/mellanox/mlx4/en_selftest.c | 12 ++++++++----
include/uapi/linux/ethtool.h | 14 +++++++++++++-
4 files changed, 39 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_port.c b/drivers/net/ethernet/mellanox/mlx4/en_port.c
index 0a0261d..afd3036 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_port.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_port.c
@@ -91,15 +91,24 @@ int mlx4_en_QUERY_PORT(struct mlx4_en_dev *mdev, u8 port)
* already synchronized, no need in locking */
state->link_state = !!(qport_context->link_up & MLX4_EN_LINK_UP_MASK);
switch (qport_context->link_speed & MLX4_EN_SPEED_MASK) {
+ case MLX4_EN_100M_SPEED:
+ state->link_speed = SPEED_100;
+ break;
case MLX4_EN_1G_SPEED:
- state->link_speed = 1000;
+ state->link_speed = SPEED_1000;
break;
case MLX4_EN_10G_SPEED_XAUI:
case MLX4_EN_10G_SPEED_XFI:
- state->link_speed = 10000;
+ state->link_speed = SPEED_10000;
+ break;
+ case MLX4_EN_20G_SPEED:
+ state->link_speed = SPEED_20000;
break;
case MLX4_EN_40G_SPEED:
- state->link_speed = 40000;
+ state->link_speed = SPEED_40000;
+ break;
+ case MLX4_EN_56G_SPEED:
+ state->link_speed = SPEED_56000;
break;
default:
state->link_speed = -1;
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_port.h b/drivers/net/ethernet/mellanox/mlx4/en_port.h
index 745090b..a5fc93b 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_port.h
+++ b/drivers/net/ethernet/mellanox/mlx4/en_port.h
@@ -54,10 +54,13 @@ enum {
};
enum {
- MLX4_EN_1G_SPEED = 0x02,
- MLX4_EN_10G_SPEED_XFI = 0x01,
+ MLX4_EN_100M_SPEED = 0x04,
MLX4_EN_10G_SPEED_XAUI = 0x00,
+ MLX4_EN_10G_SPEED_XFI = 0x01,
+ MLX4_EN_1G_SPEED = 0x02,
+ MLX4_EN_20G_SPEED = 0x08,
MLX4_EN_40G_SPEED = 0x40,
+ MLX4_EN_56G_SPEED = 0x20,
MLX4_EN_OTHER_SPEED = 0x0f,
};
@@ -68,7 +71,7 @@ struct mlx4_en_query_port_context {
__be16 mtu;
u8 reserved2;
u8 link_speed;
-#define MLX4_EN_SPEED_MASK 0x43
+#define MLX4_EN_SPEED_MASK 0x6f
u16 reserved3[5];
__be64 mac;
u8 transceiver;
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_selftest.c b/drivers/net/ethernet/mellanox/mlx4/en_selftest.c
index 49d5afc..2d8ee66 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_selftest.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_selftest.c
@@ -129,11 +129,15 @@ static int mlx4_en_test_speed(struct mlx4_en_priv *priv)
if (mlx4_en_QUERY_PORT(priv->mdev, priv->port))
return -ENOMEM;
- /* The device supports 1G, 10G and 40G speeds */
- if (priv->port_state.link_speed != 1000 &&
- priv->port_state.link_speed != 10000 &&
- priv->port_state.link_speed != 40000)
+ /* The device supports 100M, 1G, 10G, 20G, 40G and 56G speed */
+ if (priv->port_state.link_speed != SPEED_100 &&
+ priv->port_state.link_speed != SPEED_1000 &&
+ priv->port_state.link_speed != SPEED_10000 &&
+ priv->port_state.link_speed != SPEED_20000 &&
+ priv->port_state.link_speed != SPEED_40000 &&
+ priv->port_state.link_speed != SPEED_56000)
return priv->port_state.link_speed;
+
return 0;
}
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index b6acd78..eb2095b 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -1213,6 +1213,10 @@ enum ethtool_sfeatures_retval_bits {
#define SUPPORTED_40000baseCR4_Full (1 << 24)
#define SUPPORTED_40000baseSR4_Full (1 << 25)
#define SUPPORTED_40000baseLR4_Full (1 << 26)
+#define SUPPORTED_56000baseKR4_Full (1 << 27)
+#define SUPPORTED_56000baseCR4_Full (1 << 28)
+#define SUPPORTED_56000baseSR4_Full (1 << 29)
+#define SUPPORTED_56000baseLR4_Full (1 << 30)
#define ADVERTISED_10baseT_Half (1 << 0)
#define ADVERTISED_10baseT_Full (1 << 1)
@@ -1241,6 +1245,10 @@ enum ethtool_sfeatures_retval_bits {
#define ADVERTISED_40000baseCR4_Full (1 << 24)
#define ADVERTISED_40000baseSR4_Full (1 << 25)
#define ADVERTISED_40000baseLR4_Full (1 << 26)
+#define ADVERTISED_56000baseKR4_Full (1 << 27)
+#define ADVERTISED_56000baseCR4_Full (1 << 28)
+#define ADVERTISED_56000baseSR4_Full (1 << 29)
+#define ADVERTISED_56000baseLR4_Full (1 << 30)
/* The following are all involved in forcing a particular link
* mode for the device for setting things. When getting the
@@ -1248,12 +1256,16 @@ enum ethtool_sfeatures_retval_bits {
* it was forced up into this mode or autonegotiated.
*/
-/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
+/* The forced speed, 10Mb, 100Mb, gigabit, [2.5|10|20|40|56]GbE. */
#define SPEED_10 10
#define SPEED_100 100
#define SPEED_1000 1000
#define SPEED_2500 2500
#define SPEED_10000 10000
+#define SPEED_20000 20000
+#define SPEED_40000 40000
+#define SPEED_56000 56000
+
#define SPEED_UNKNOWN -1
/* Duplex, half or full. */
--
1.8.3.4
^ permalink raw reply related
* [PATCH net-next 10/13] net/mlx4_en: Cleanups suggested by clang static checker
From: Amir Vadai @ 2014-10-27 9:37 UTC (permalink / raw)
To: David S. Miller
Cc: netdev, Yevgeny Petrilin, Or Gerlitz, Amir Vadai,
Jack Morgenstein
In-Reply-To: <1414402667-8841-1-git-send-email-amirv@mellanox.com>
From: Jack Morgenstein <jackm@dev.mellanox.co.il>
clang flagged the following. All are actually cosmetic cleanups, not really bugs:
drivers/net/ethernet/mellanox/mlx4/en_main.c:233:3: warning: Value stored to 'err' is never read
err = -ENOMEM;
^ ~~~~~~~
drivers/net/ethernet/mellanox/mlx4/en_main.c:293:3: warning: Value stored to 'err' is never read
err = -ENOMEM;
drivers/net/ethernet/mellanox/mlx4/en_netdev.c:648:16: warning: Assigned value is garbage or undefined
entry->reg_id = reg_id;
^ ~~~~~~
drivers/net/ethernet/mellanox/mlx4/en_netdev.c:659:2: warning: Function call argument is an uninitialized value
mlx4_en_uc_steer_release(priv, priv->dev->dev_addr, *qpn, reg_id);
(NOTE: reg_id is only used in the device-managed flow steering path, in which is it always initialized.
This is not a bug. Cleanup here is therefore cosmetic only).
drivers/net/ethernet/mellanox/mlx4/en_rx.c:122:3: warning: Value stored to 'frag_info' is never read
frag_info = &priv->frag_info[i];
^ ~~~~~~~~~~~~~~~~~~~
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx4/en_main.c | 12 +++---------
drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 2 +-
drivers/net/ethernet/mellanox/mlx4/en_rx.c | 1 -
3 files changed, 4 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_main.c b/drivers/net/ethernet/mellanox/mlx4/en_main.c
index 2091ae88..9f16f75 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_main.c
@@ -221,15 +221,12 @@ static void *mlx4_en_add(struct mlx4_dev *dev)
{
struct mlx4_en_dev *mdev;
int i;
- int err;
printk_once(KERN_INFO "%s", mlx4_en_version);
mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
- if (!mdev) {
- err = -ENOMEM;
+ if (!mdev)
goto err_free_res;
- }
if (mlx4_pd_alloc(dev, &mdev->priv_pdn))
goto err_free_dev;
@@ -264,8 +261,7 @@ static void *mlx4_en_add(struct mlx4_dev *dev)
}
/* Build device profile according to supplied module parameters */
- err = mlx4_en_get_profile(mdev);
- if (err) {
+ if (mlx4_en_get_profile(mdev)) {
mlx4_err(mdev, "Bad module parameters, aborting\n");
goto err_mr;
}
@@ -286,10 +282,8 @@ static void *mlx4_en_add(struct mlx4_dev *dev)
* Note: we cannot use the shared workqueue because of deadlocks caused
* by the rtnl lock */
mdev->workqueue = create_singlethread_workqueue("mlx4_en");
- if (!mdev->workqueue) {
- err = -ENOMEM;
+ if (!mdev->workqueue)
goto err_mr;
- }
/* At this stage all non-port specific tasks are complete:
* mark the card state as up */
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 5d60882..c4450be 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -575,7 +575,7 @@ static int mlx4_en_get_qp(struct mlx4_en_priv *priv)
struct mlx4_mac_entry *entry;
int index = 0;
int err = 0;
- u64 reg_id;
+ u64 reg_id = 0;
int *qpn = &priv->base_qpn;
u64 mac = mlx4_mac_to_u64(priv->dev->dev_addr);
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_rx.c b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
index 01660c5..c8e75da 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_rx.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_rx.c
@@ -119,7 +119,6 @@ static int mlx4_en_alloc_frags(struct mlx4_en_priv *priv,
out:
while (i--) {
- frag_info = &priv->frag_info[i];
if (page_alloc[i].page != ring_alloc[i].page) {
dma_unmap_page(priv->ddev, page_alloc[i].dma,
page_alloc[i].page_size, PCI_DMA_FROMDEVICE);
--
1.8.3.4
^ permalink raw reply related
* [PATCH net-next 12/13] net/mlx4_en: Move spinlocks and work initalizations to beginning of init_netdev
From: Amir Vadai @ 2014-10-27 9:37 UTC (permalink / raw)
To: David S. Miller
Cc: netdev, Yevgeny Petrilin, Or Gerlitz, Amir Vadai,
Eugenia Emantayev
In-Reply-To: <1414402667-8841-1-git-send-email-amirv@mellanox.com>
From: Eugenia Emantayev <eugenia@mellanox.com>
Upon failures, destroy_netdev is called, and spinlocks/works must be
initialized before calling it. Otherwise kernel panic may occur.
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 30 +++++++++++++-------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index 3c07a75..ca6ffcf 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -2440,6 +2440,21 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
priv = netdev_priv(dev);
memset(priv, 0, sizeof(struct mlx4_en_priv));
+ spin_lock_init(&priv->stats_lock);
+ INIT_WORK(&priv->rx_mode_task, mlx4_en_do_set_rx_mode);
+ INIT_WORK(&priv->watchdog_task, mlx4_en_restart);
+ INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate);
+ INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats);
+ INIT_DELAYED_WORK(&priv->service_task, mlx4_en_service_task);
+#ifdef CONFIG_MLX4_EN_VXLAN
+ INIT_WORK(&priv->vxlan_add_task, mlx4_en_add_vxlan_offloads);
+ INIT_WORK(&priv->vxlan_del_task, mlx4_en_del_vxlan_offloads);
+#endif
+#ifdef CONFIG_RFS_ACCEL
+ INIT_LIST_HEAD(&priv->filters);
+ spin_lock_init(&priv->filters_lock);
+#endif
+
priv->dev = dev;
priv->mdev = mdev;
priv->ddev = &mdev->pdev->dev;
@@ -2471,16 +2486,6 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
priv->cqe_size = mdev->dev->caps.cqe_size;
priv->mac_index = -1;
priv->msg_enable = MLX4_EN_MSG_LEVEL;
- spin_lock_init(&priv->stats_lock);
- INIT_WORK(&priv->rx_mode_task, mlx4_en_do_set_rx_mode);
- INIT_WORK(&priv->watchdog_task, mlx4_en_restart);
- INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate);
- INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats);
- INIT_DELAYED_WORK(&priv->service_task, mlx4_en_service_task);
-#ifdef CONFIG_MLX4_EN_VXLAN
- INIT_WORK(&priv->vxlan_add_task, mlx4_en_add_vxlan_offloads);
- INIT_WORK(&priv->vxlan_del_task, mlx4_en_del_vxlan_offloads);
-#endif
#ifdef CONFIG_MLX4_EN_DCB
if (!mlx4_is_slave(priv->mdev->dev)) {
if (mdev->dev->caps.flags & MLX4_DEV_CAP_FLAG_SET_ETH_SCHED) {
@@ -2523,11 +2528,6 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
if (err)
goto out;
-#ifdef CONFIG_RFS_ACCEL
- INIT_LIST_HEAD(&priv->filters);
- spin_lock_init(&priv->filters_lock);
-#endif
-
/* Initialize time stamping config */
priv->hwtstamp_config.flags = 0;
priv->hwtstamp_config.tx_type = HWTSTAMP_TX_OFF;
--
1.8.3.4
^ permalink raw reply related
* [PATCH net-next 07/13] net/mlx4_en: Use PTYS register to set ethtool settings (Speed)
From: Amir Vadai @ 2014-10-27 9:37 UTC (permalink / raw)
To: David S. Miller
Cc: netdev, Yevgeny Petrilin, Or Gerlitz, Amir Vadai, Saeed Mahameed
In-Reply-To: <1414402667-8841-1-git-send-email-amirv@mellanox.com>
From: Saeed Mahameed <saeedm@mellanox.com>
Added Support to set speed or advertised link modes via ethtool:
ethtool -s <ifname> [speed <speed>] [advertise <link modes>]
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 108 +++++++++++++++++++++++-
1 file changed, 104 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
index 64b6743..144d6bd 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -570,6 +570,31 @@ static u32 ptys2ethtool_link_modes(u32 eth_proto, enum ethtool_report report)
return link_modes;
}
+static u32 ethtool2ptys_link_modes(u32 link_modes, enum ethtool_report report)
+{
+ int i;
+ u32 ptys_modes = 0;
+
+ for (i = 0; i < MLX4_LINK_MODES_SZ; i++) {
+ if (ptys2ethtool_map[i][report] & link_modes)
+ ptys_modes |= 1 << i;
+ }
+ return ptys_modes;
+}
+
+/* Convert actual speed (SPEED_XXX) to ptys link modes */
+static u32 speed2ptys_link_modes(u32 speed)
+{
+ int i;
+ u32 ptys_modes = 0;
+
+ for (i = 0; i < MLX4_LINK_MODES_SZ; i++) {
+ if (ptys2ethtool_map[i][SPEED] == speed)
+ ptys_modes |= 1 << i;
+ }
+ return ptys_modes;
+}
+
static int ethtool_get_ptys_settings(struct net_device *dev,
struct ethtool_cmd *cmd)
{
@@ -698,14 +723,89 @@ static int mlx4_en_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
return 0;
}
+/* Calculate PTYS admin according ethtool speed (SPEED_XXX) */
+static __be32 speed_set_ptys_admin(struct mlx4_en_priv *priv, u32 speed,
+ __be32 proto_cap)
+{
+ __be32 proto_admin = 0;
+
+ if (!speed) { /* Speed = 0 ==> Reset Link modes */
+ proto_admin = proto_cap;
+ en_info(priv, "Speed was set to 0, Reset advertised Link Modes to default (%x)\n",
+ be32_to_cpu(proto_cap));
+ } else {
+ u32 ptys_link_modes = speed2ptys_link_modes(speed);
+
+ proto_admin = cpu_to_be32(ptys_link_modes) & proto_cap;
+ en_info(priv, "Setting Speed to %d\n", speed);
+ }
+ return proto_admin;
+}
+
static int mlx4_en_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
- if ((cmd->autoneg == AUTONEG_ENABLE) ||
- (ethtool_cmd_speed(cmd) != SPEED_10000) ||
- (cmd->duplex != DUPLEX_FULL))
+ struct mlx4_en_priv *priv = netdev_priv(dev);
+ struct mlx4_ptys_reg ptys_reg;
+ __be32 proto_admin;
+ int ret;
+
+ u32 ptys_adv = ethtool2ptys_link_modes(cmd->advertising, ADVERTISED);
+ int speed = ethtool_cmd_speed(cmd);
+
+ en_dbg(DRV, priv, "Set Speed=%d adv=0x%x autoneg=%d duplex=%d\n",
+ speed, cmd->advertising, cmd->autoneg, cmd->duplex);
+
+ if (!(priv->mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_ETH_PROT_CTRL) ||
+ (cmd->autoneg == AUTONEG_ENABLE) || (cmd->duplex == DUPLEX_HALF))
return -EINVAL;
- /* Nothing to change */
+ memset(&ptys_reg, 0, sizeof(ptys_reg));
+ ptys_reg.local_port = priv->port;
+ ptys_reg.proto_mask = MLX4_PTYS_EN;
+ ret = mlx4_ACCESS_PTYS_REG(priv->mdev->dev,
+ MLX4_ACCESS_REG_QUERY, &ptys_reg);
+ if (ret) {
+ en_warn(priv, "Failed to QUERY mlx4_ACCESS_PTYS_REG status(%x)\n",
+ ret);
+ return 0;
+ }
+
+ proto_admin = cpu_to_be32(ptys_adv);
+ if (speed >= 0 && speed != priv->port_state.link_speed)
+ /* If speed was set then speed decides :-) */
+ proto_admin = speed_set_ptys_admin(priv, speed,
+ ptys_reg.eth_proto_cap);
+
+ proto_admin &= ptys_reg.eth_proto_cap;
+
+ if (proto_admin == ptys_reg.eth_proto_admin)
+ return 0; /* Nothing to change */
+
+ if (!proto_admin) {
+ en_warn(priv, "Not supported link mode(s) requested, check supported link modes.\n");
+ return -EINVAL; /* nothing to change due to bad input */
+ }
+
+ en_dbg(DRV, priv, "mlx4_ACCESS_PTYS_REG SET: ptys_reg.eth_proto_admin = 0x%x\n",
+ be32_to_cpu(proto_admin));
+
+ ptys_reg.eth_proto_admin = proto_admin;
+ ret = mlx4_ACCESS_PTYS_REG(priv->mdev->dev, MLX4_ACCESS_REG_WRITE,
+ &ptys_reg);
+ if (ret) {
+ en_warn(priv, "Failed to write mlx4_ACCESS_PTYS_REG eth_proto_admin(0x%x) status(0x%x)",
+ be32_to_cpu(ptys_reg.eth_proto_admin), ret);
+ return ret;
+ }
+
+ en_warn(priv, "Port link mode changed, restarting port...\n");
+ mutex_lock(&priv->mdev->state_lock);
+ if (priv->port_up) {
+ mlx4_en_stop_port(dev, 1);
+ if (mlx4_en_start_port(dev))
+ en_err(priv, "Failed restarting port %d\n", priv->port);
+ }
+ mutex_unlock(&priv->mdev->state_lock);
return 0;
}
--
1.8.3.4
^ permalink raw reply related
* [PATCH net-next 09/13] net/mlx4_en: Add ethtool support for [rx|tx]vlan offload set to OFF/ON
From: Amir Vadai @ 2014-10-27 9:37 UTC (permalink / raw)
To: David S. Miller
Cc: netdev, Yevgeny Petrilin, Or Gerlitz, Amir Vadai, Saeed Mahameed
In-Reply-To: <1414402667-8841-1-git-send-email-amirv@mellanox.com>
From: Saeed Mahameed <saeedm@mellanox.com>
Move mlx4_en_reset_config to en_netdev.c as it now serves more general purpose.
Add support for turning OFF/ON the rx/tx vlan offlad.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx4/en_clock.c | 77 ----------------------
drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 90 +++++++++++++++++++++++++-
2 files changed, 89 insertions(+), 78 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_clock.c b/drivers/net/ethernet/mellanox/mlx4/en_clock.c
index 285fccf..9990144 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_clock.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_clock.c
@@ -35,83 +35,6 @@
#include "mlx4_en.h"
-int mlx4_en_reset_config(struct net_device *dev,
- struct hwtstamp_config ts_config,
- netdev_features_t features)
-{
- struct mlx4_en_priv *priv = netdev_priv(dev);
- struct mlx4_en_dev *mdev = priv->mdev;
- int port_up = 0;
- int err = 0;
-
- if (priv->hwtstamp_config.tx_type == ts_config.tx_type &&
- priv->hwtstamp_config.rx_filter == ts_config.rx_filter &&
- !DEV_FEATURE_CHANGED(dev, features, NETIF_F_HW_VLAN_CTAG_RX))
- return 0; /* Nothing to change */
-
- if (DEV_FEATURE_CHANGED(dev, features, NETIF_F_HW_VLAN_CTAG_RX) &&
- (features & NETIF_F_HW_VLAN_CTAG_RX) &&
- (priv->hwtstamp_config.rx_filter != HWTSTAMP_FILTER_NONE)) {
- en_warn(priv, "Can't turn ON rx vlan offload while time-stamping rx filter is ON\n");
- return -EINVAL;
- }
-
- mutex_lock(&mdev->state_lock);
- if (priv->port_up) {
- port_up = 1;
- mlx4_en_stop_port(dev, 1);
- }
-
- mlx4_en_free_resources(priv);
-
- en_warn(priv, "Changing device configuration rx filter(%x) rx vlan(%x)\n",
- ts_config.rx_filter, !!(features & NETIF_F_HW_VLAN_CTAG_RX));
-
- priv->hwtstamp_config.tx_type = ts_config.tx_type;
- priv->hwtstamp_config.rx_filter = ts_config.rx_filter;
-
- if (DEV_FEATURE_CHANGED(dev, features, NETIF_F_HW_VLAN_CTAG_RX)) {
- if (features & NETIF_F_HW_VLAN_CTAG_RX)
- dev->features |= NETIF_F_HW_VLAN_CTAG_RX;
- else
- dev->features &= ~NETIF_F_HW_VLAN_CTAG_RX;
- } else if (ts_config.rx_filter == HWTSTAMP_FILTER_NONE) {
- /* RX time-stamping is OFF, update the RX vlan offload
- * to the latest wanted state
- */
- if (dev->wanted_features & NETIF_F_HW_VLAN_CTAG_RX)
- dev->features |= NETIF_F_HW_VLAN_CTAG_RX;
- else
- dev->features &= ~NETIF_F_HW_VLAN_CTAG_RX;
- }
-
- /* RX vlan offload and RX time-stamping can't co-exist !
- * Regardless of the caller's choice,
- * Turn Off RX vlan offload in case of time-stamping is ON
- */
- if (ts_config.rx_filter != HWTSTAMP_FILTER_NONE) {
- if (dev->features & NETIF_F_HW_VLAN_CTAG_RX)
- en_warn(priv, "Turning off RX vlan offload since RX time-stamping is ON\n");
- dev->features &= ~NETIF_F_HW_VLAN_CTAG_RX;
- }
-
- err = mlx4_en_alloc_resources(priv);
- if (err) {
- en_err(priv, "Failed reallocating port resources\n");
- goto out;
- }
- if (port_up) {
- err = mlx4_en_start_port(dev);
- if (err)
- en_err(priv, "Failed starting port\n");
- }
-
-out:
- mutex_unlock(&mdev->state_lock);
- netdev_features_change(dev);
- return err;
-}
-
/* mlx4_en_read_clock - read raw cycle counter (to be used by time counter)
*/
static cycle_t mlx4_en_read_clock(const struct cyclecounter *tc)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index c4bd2c7..5d60882 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -2190,6 +2190,16 @@ static int mlx4_en_set_features(struct net_device *netdev,
netdev_features_t features)
{
struct mlx4_en_priv *priv = netdev_priv(netdev);
+ int ret = 0;
+
+ if (DEV_FEATURE_CHANGED(netdev, features, NETIF_F_HW_VLAN_CTAG_RX)) {
+ en_info(priv, "Turn %s RX vlan strip offload\n",
+ (features & NETIF_F_HW_VLAN_CTAG_RX) ? "ON" : "OFF");
+ ret = mlx4_en_reset_config(netdev, priv->hwtstamp_config,
+ features);
+ if (ret)
+ return ret;
+ }
if (features & NETIF_F_LOOPBACK)
priv->ctrl_flags |= cpu_to_be32(MLX4_WQE_CTRL_FORCE_LOOPBACK);
@@ -2559,7 +2569,8 @@ int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
dev->features = dev->hw_features | NETIF_F_HIGHDMA |
NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX |
NETIF_F_HW_VLAN_CTAG_FILTER;
- dev->hw_features |= NETIF_F_LOOPBACK;
+ dev->hw_features |= NETIF_F_LOOPBACK |
+ NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
if (mdev->dev->caps.steering_mode ==
MLX4_STEERING_MODE_DEVICE_MANAGED)
@@ -2633,3 +2644,80 @@ out:
return err;
}
+int mlx4_en_reset_config(struct net_device *dev,
+ struct hwtstamp_config ts_config,
+ netdev_features_t features)
+{
+ struct mlx4_en_priv *priv = netdev_priv(dev);
+ struct mlx4_en_dev *mdev = priv->mdev;
+ int port_up = 0;
+ int err = 0;
+
+ if (priv->hwtstamp_config.tx_type == ts_config.tx_type &&
+ priv->hwtstamp_config.rx_filter == ts_config.rx_filter &&
+ !DEV_FEATURE_CHANGED(dev, features, NETIF_F_HW_VLAN_CTAG_RX))
+ return 0; /* Nothing to change */
+
+ if (DEV_FEATURE_CHANGED(dev, features, NETIF_F_HW_VLAN_CTAG_RX) &&
+ (features & NETIF_F_HW_VLAN_CTAG_RX) &&
+ (priv->hwtstamp_config.rx_filter != HWTSTAMP_FILTER_NONE)) {
+ en_warn(priv, "Can't turn ON rx vlan offload while time-stamping rx filter is ON\n");
+ return -EINVAL;
+ }
+
+ mutex_lock(&mdev->state_lock);
+ if (priv->port_up) {
+ port_up = 1;
+ mlx4_en_stop_port(dev, 1);
+ }
+
+ mlx4_en_free_resources(priv);
+
+ en_warn(priv, "Changing device configuration rx filter(%x) rx vlan(%x)\n",
+ ts_config.rx_filter, !!(features & NETIF_F_HW_VLAN_CTAG_RX));
+
+ priv->hwtstamp_config.tx_type = ts_config.tx_type;
+ priv->hwtstamp_config.rx_filter = ts_config.rx_filter;
+
+ if (DEV_FEATURE_CHANGED(dev, features, NETIF_F_HW_VLAN_CTAG_RX)) {
+ if (features & NETIF_F_HW_VLAN_CTAG_RX)
+ dev->features |= NETIF_F_HW_VLAN_CTAG_RX;
+ else
+ dev->features &= ~NETIF_F_HW_VLAN_CTAG_RX;
+ } else if (ts_config.rx_filter == HWTSTAMP_FILTER_NONE) {
+ /* RX time-stamping is OFF, update the RX vlan offload
+ * to the latest wanted state
+ */
+ if (dev->wanted_features & NETIF_F_HW_VLAN_CTAG_RX)
+ dev->features |= NETIF_F_HW_VLAN_CTAG_RX;
+ else
+ dev->features &= ~NETIF_F_HW_VLAN_CTAG_RX;
+ }
+
+ /* RX vlan offload and RX time-stamping can't co-exist !
+ * Regardless of the caller's choice,
+ * Turn Off RX vlan offload in case of time-stamping is ON
+ */
+ if (ts_config.rx_filter != HWTSTAMP_FILTER_NONE) {
+ if (dev->features & NETIF_F_HW_VLAN_CTAG_RX)
+ en_warn(priv, "Turning off RX vlan offload since RX time-stamping is ON\n");
+ dev->features &= ~NETIF_F_HW_VLAN_CTAG_RX;
+ }
+
+ err = mlx4_en_alloc_resources(priv);
+ if (err) {
+ en_err(priv, "Failed reallocating port resources\n");
+ goto out;
+ }
+ if (port_up) {
+ err = mlx4_en_start_port(dev);
+ if (err)
+ en_err(priv, "Failed starting port\n");
+ }
+
+out:
+ mutex_unlock(&mdev->state_lock);
+ netdev_features_change(dev);
+ return err;
+}
+
--
1.8.3.4
^ permalink raw reply related
* [PATCH net-next 13/13] net/mlx4_en: Report actual number of rings in indirection table
From: Amir Vadai @ 2014-10-27 9:37 UTC (permalink / raw)
To: David S. Miller
Cc: netdev, Yevgeny Petrilin, Or Gerlitz, Amir Vadai,
Eugenia Emantayev
In-Reply-To: <1414402667-8841-1-git-send-email-amirv@mellanox.com>
Hardware requires the number of rings in indirection table to be a power
of 2. When setting number of channels to a non power of 2 number,
indirection table is using only the closest power of 2 rings.
Report this number in 'ethtool -x' and not the total number of rx rings.
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
index 144d6bd..8ea4d5b 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c
@@ -982,6 +982,7 @@ static int mlx4_en_get_rxfh(struct net_device *dev, u32 *ring_index, u8 *key)
int err = 0;
rss_rings = priv->prof->rss_rings ?: priv->rx_ring_num;
+ rss_rings = 1 << ilog2(rss_rings);
while (n--) {
ring_index[n] = rss_map->qps[n % rss_rings].qpn -
--
1.8.3.4
^ permalink raw reply related
* [PATCH net-next 11/13] net/mlx4_en: Call napi_synchronize on stop_port
From: Amir Vadai @ 2014-10-27 9:37 UTC (permalink / raw)
To: David S. Miller
Cc: netdev, Yevgeny Petrilin, Or Gerlitz, Amir Vadai, Ido Shamay
In-Reply-To: <1414402667-8841-1-git-send-email-amirv@mellanox.com>
From: Ido Shamay <idos@mellanox.com>
This is instead of calling the actual implementation of
napi_synchronize, for better encapsulation.
Signed-off-by: Ido Shamay <idos@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
---
drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index c4450be..3c07a75 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -1843,8 +1843,7 @@ void mlx4_en_stop_port(struct net_device *dev, int detach)
}
local_bh_enable();
- while (test_bit(NAPI_STATE_SCHED, &cq->napi.state))
- msleep(1);
+ napi_synchronize(&cq->napi);
mlx4_en_deactivate_rx_ring(priv, priv->rx_ring[i]);
mlx4_en_deactivate_cq(priv, cq);
--
1.8.3.4
^ permalink raw reply related
* Re: [PATCH net 0/3] cdc-ether: handle promiscuous mode
From: Oliver Neukum @ 2014-10-27 10:02 UTC (permalink / raw)
To: Olivier Blin; +Cc: netdev, hayeswang, bjorn, davem
In-Reply-To: <1414172582-30844-1-git-send-email-olivier.blin@softathome.com>
On Fri, 2014-10-24 at 19:42 +0200, Olivier Blin wrote:
> Hi,
>
> Since kernel 3.16, my Lenovo USB network adapters (RTL8153) using
> cdc-ether are not working anymore in a bridge.
>
> This is due to commit c472ab68ad67db23c9907a27649b7dc0899b61f9, which
> resets the packet filter when the device is bound.
>
> The default packet filter set by cdc-ether does not include
> promiscuous, while the adapter seemed to have promiscuous enabled by
> default.
>
> This patch series allows to support promiscuous mode for cdc-ether, by
> hooking into set_rx_mode.
>
> Incidentally, maybe this device should be handled by the r8152 driver,
> but this patch series is still nice for other adapters.
Acked-by: Oliver Neukum <oneukum@suse.de>
Regards
Oliver
^ permalink raw reply
* Re: [ovs-dev] [PATCH net-next] datapath: Rename last_action() as nla_is_last() and move to netlink.h
From: Thomas Graf @ 2014-10-27 10:08 UTC (permalink / raw)
To: Simon Horman; +Cc: netdev, David S. Miller, Pravin Shelar, dev
In-Reply-To: <1414393936-14463-1-git-send-email-simon.horman@netronome.com>
On 10/27/14 at 04:12pm, Simon Horman wrote:
> The original motivation for this change was to allow the helper to be used
> in files other than actions.c as part of work on an odp select group
> action.
>
> It was as pointed out by Thomas Graf that this helper would be best off
> living in netlink.h. Furthermore, I think that the generic nature of this
> helper means it is best off in netlink.h regardless of if it is used more
> than one .c file or not. Thus, I would like it considered independent of
> the work on an odp select group action.
>
> Cc: Thomas Graf <tgraf@suug.ch>
> Cc: Pravin Shelar <pshelar@nicira.com>
> Cc: Andy Zhou <azhou@nicira.com>
> Signed-off-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Thomas Graf <tgraf@noironetworks.com>
^ permalink raw reply
* Poor UDP throughput with virtual devices and UFO
From: Toshiaki Makita @ 2014-10-27 10:29 UTC (permalink / raw)
To: netdev; +Cc: Herbert Xu, Eric Dumazet
Hi,
I recently noticed sending UDP packets ends up with very poor throughput when
using UFO and virtual devices.
Example configurations are:
- macvlan on vlan
- gre on bridge
With these configurations, the upper virtual devices (macvlan, gre) has the
UFO feature and the lower devices (vlan, bridge) don't have it. UFO packets
will be sent from the upper devices and fragmented on the lower devices.
So, they will be fragmented before entering qdisc.
Since skb_segment() doesn't increase sk_wmem_alloc, the send buffer of a UDP
socket looks almost always empty, and user space can send packets with no limit,
which causes massive drops on qdisc.
I wrote a patch to increase sk_wmem_alloc in skb_segment(), but I'm wondering
if we can do this change since it has been this way for years and only TCP
handles it so far (d6a4a1041176 "tcp: GSO should be TSQ friendly").
Here are performance test results (macvlan on vlan):
- Before
# netperf -t UDP_STREAM ...
Socket Message Elapsed Messages
Size Size Time Okay Errors Throughput
bytes bytes secs # # 10^6bits/sec
212992 65507 60.00 144096 1224195 1258.56
212992 60.00 51 0.45
Average: CPU %user %nice %system %iowait %steal %idle
Average: all 0.23 0.00 25.26 0.08 0.00 74.43
Average: 0 0.29 0.00 0.76 0.29 0.00 98.66
Average: 1 0.21 0.00 0.33 0.00 0.00 99.45
Average: 2 0.05 0.00 0.12 0.07 0.00 99.76
Average: 3 0.36 0.00 99.64 0.00 0.00 0.00
- After
# netperf -t UDP_STREAM ...
Socket Message Elapsed Messages
Size Size Time Okay Errors Throughput
bytes bytes secs # # 10^6bits/sec
212992 65507 60.00 109593 0 957.20
212992 60.00 109593 957.20
Average: CPU %user %nice %system %iowait %steal %idle
Average: all 0.18 0.00 8.38 0.02 0.00 91.43
Average: 0 0.17 0.00 3.60 0.00 0.00 96.23
Average: 1 0.13 0.00 6.60 0.00 0.00 93.27
Average: 2 0.23 0.00 5.76 0.07 0.00 93.94
Average: 3 0.17 0.00 17.57 0.00 0.00 82.26
The patch (based on net tree) for the test above:
----
Subject: [PATCH net] gso: Inherit sk_wmem_alloc
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
---
net/core/skbuff.c | 6 +++++-
net/ipv4/tcp_offload.c | 13 ++++---------
2 files changed, 9 insertions(+), 10 deletions(-)
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index c16615b..29dc763 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -3020,7 +3020,7 @@ struct sk_buff *skb_segment(struct sk_buff *head_skb,
len, 0);
SKB_GSO_CB(nskb)->csum_start =
skb_headroom(nskb) + doffset;
- continue;
+ goto set_owner;
}
nskb_frag = skb_shinfo(nskb)->frags;
@@ -3092,6 +3092,10 @@ perform_csum_check:
SKB_GSO_CB(nskb)->csum_start =
skb_headroom(nskb) + doffset;
}
+
+set_owner:
+ if (head_skb->sk)
+ skb_set_owner_w(nskb, head_skb->sk);
} while ((offset += len) < head_skb->len);
/* Some callers want to get the end of the list.
diff --git a/net/ipv4/tcp_offload.c b/net/ipv4/tcp_offload.c
index 5b90f2f..93758a8 100644
--- a/net/ipv4/tcp_offload.c
+++ b/net/ipv4/tcp_offload.c
@@ -139,11 +139,8 @@ struct sk_buff *tcp_gso_segment(struct sk_buff *skb,
th->check = gso_make_checksum(skb, ~th->check);
seq += mss;
- if (copy_destructor) {
+ if (copy_destructor)
skb->destructor = gso_skb->destructor;
- skb->sk = gso_skb->sk;
- sum_truesize += skb->truesize;
- }
skb = skb->next;
th = tcp_hdr(skb);
@@ -157,11 +154,9 @@ struct sk_buff *tcp_gso_segment(struct sk_buff *skb,
* is freed by GSO engine
*/
if (copy_destructor) {
- swap(gso_skb->sk, skb->sk);
- swap(gso_skb->destructor, skb->destructor);
- sum_truesize += skb->truesize;
- atomic_add(sum_truesize - gso_skb->truesize,
- &skb->sk->sk_wmem_alloc);
+ skb->destructor = gso_skb->destructor;
+ gso_skb->destructor = NULL;
+ atomic_sub(gso_skb->truesize, &skb->sk->sk_wmem_alloc);
}
delta = htonl(oldlen + (skb_tail_pointer(skb) -
--
1.8.1.2
^ permalink raw reply related
* Re: [PATCH v2 09/15] net: dsa: Add support for switch EEPROM access
From: Guenter Roeck @ 2014-10-27 13:22 UTC (permalink / raw)
To: Richard Cochran
Cc: Andrew Lunn, netdev, David S. Miller, Florian Fainelli,
linux-kernel
In-Reply-To: <20141027085048.GC4748@netboy>
On 10/27/2014 01:50 AM, Richard Cochran wrote:
> On Sun, Oct 26, 2014 at 08:56:20PM -0700, Guenter Roeck wrote:
>>
>> Also, it seems that you request two separate properties, one for presence
>> and another for length. Is that correct ? Again, I thought that would not
>> provide any value since presence is indicated by length != 0 in the ethtool
>> callback function. No problem, though, I'll be happy to create two separate
>> properties and platform data variables if you think that would be better.
>
> The fewer properties, the better.
>
Right now I have:
Optional properties:
- eeprom-length : Set to the length of an EEPROM connected to the
switch. Must be set if the switch can not detect
the presence and/or size of a connected EEPROM,
otherwise optional.
and I think Andrew is asking for the following:
Optional properties:
- eeprom-present : Boolean property indicating that an EEPROM is present.
Must be set if an EEPROM is present.
- eeprom-length : Set to the length of an EEPROM connected to the
switch. Must be set if the switch can not detect
the size of a connected EEPROM, otherwise optional.
Platform data semantics would be the same.
I can go either way, but I would like to get some kind of agreement before I jump
into writing the code.
Thanks,
Guenter
^ permalink raw reply
* Re: [PATCH 1/1 net-next] xfrm: fix set but not used warning in xfrm_policy_queue_process()
From: Steffen Klassert @ 2014-10-27 13:35 UTC (permalink / raw)
To: Fabian Frederick; +Cc: linux-kernel, Herbert Xu, David S. Miller, netdev
In-Reply-To: <1414250829-17908-1-git-send-email-fabf@skynet.be>
On Sat, Oct 25, 2014 at 05:27:09PM +0200, Fabian Frederick wrote:
> err was set but unused.
>
> Signed-off-by: Fabian Frederick <fabf@skynet.be>
Applied to ipsec-next, thanks!
^ permalink raw reply
* Re: [PATCH v2 09/15] net: dsa: Add support for switch EEPROM access
From: Andrew Lunn @ 2014-10-27 13:59 UTC (permalink / raw)
To: Guenter Roeck
Cc: Andrew Lunn, netdev, David S. Miller, Florian Fainelli,
linux-kernel
In-Reply-To: <544DC264.9020600@roeck-us.net>
> So lets take a step back: For the Marvell chips, I have to provide both length
> and presence in devicetree or platform data. Presence seemed to be implied by
> length, so I used only a single property and variable to indicate both.
Hi Guenter
What i was thinking, is that you don't need length in device tree. The
datasheet specifies how big the EEPROM needs to be.
However, i read the datasheet for the 6060, the only public datasheet
from Marvell. It does not work as i expected. Rather than being a
fixed list of register values, it is a variable length list of
command/value pairs.
In this situation, yes, you do need the length in DT.
I had a quick look at some other switch chips. e.g. the RTL8100. It
has a fixed layout of its EEPROM, consisting of 0x80 bytes. In this
case, the switch driver could be hard coded with 0x80, and all DT
needs to indicate is if the EEPROM is present or not.
So, what you have proposed will work. It is maybe not optimal in the
case of a well defined in the datasheet fixed size EEPROM, but it
still works.
Acked-by: Andrew Lunn <andrew@lunn.ch>
Andrew
^ permalink raw reply
* Re: [PATCH] netlink: don't copy over empty attribute data
From: Sasha Levin @ 2014-10-27 14:42 UTC (permalink / raw)
To: David Miller; +Cc: a.ryabinin, pablo, mschmidt, akpm, linux-kernel, netdev
In-Reply-To: <20141026.220350.2098346782596904995.davem@davemloft.net>
On 10/26/2014 10:03 PM, David Miller wrote:
> From: Sasha Levin <sasha.levin@oracle.com>
> Date: Sun, 26 Oct 2014 19:32:42 -0400
>
>> How so? GCC states clearly that you should *never* pass a NULL
>> pointer there:
>>
>> "The pointers passed to memmove (and similar functions in <string.h>) must
>> be non-null even when nbytes==0" (https://gcc.gnu.org/gcc-4.9/porting_to.html).
>>
>> Even if it doesn't dereference it, it can break somehow in a subtle way. Leaving
>> the kernel code assuming that gcc (or any other compiler) would always behave
>> the same in a situation that shouldn't occur.
>
> Show me a legal way in which one could legally dereference the pointer
> when length is zero, and I'll entertain this patch.
The moment you've triggered an undefined behaviour you have GCC license to
dereference anything it wants. GCC would be well within it's rights
dereferencing a NULL "from".
They even state it clearly in that GCC 4.9 porting guide I've linked above:
"""
Calling copy(p, NULL, 0) can therefore deference a null pointer and crash.
The example above needs to be fixed to avoid the invalid memmove call, for example:
if (nbytes != 0)
memmove (dest, src, nbytes);
"""
Thanks,
Sasha
^ permalink raw reply
* Re: Poor UDP throughput with virtual devices and UFO
From: Eric Dumazet @ 2014-10-27 15:01 UTC (permalink / raw)
To: Toshiaki Makita; +Cc: netdev, Herbert Xu, Eric Dumazet
In-Reply-To: <1414405781.4492.38.camel@ubuntu-vm-makita>
On Mon, 2014-10-27 at 19:29 +0900, Toshiaki Makita wrote:
> Hi,
...
> I wrote a patch to increase sk_wmem_alloc in skb_segment(), but I'm wondering
> if we can do this change since it has been this way for years and only TCP
> handles it so far (d6a4a1041176 "tcp: GSO should be TSQ friendly").
Thats probably because UFO is kind of strange : No NIC actually does UDP
segmentation.
> ----
> Subject: [PATCH net] gso: Inherit sk_wmem_alloc
>
> Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
> ---
> net/core/skbuff.c | 6 +++++-
> net/ipv4/tcp_offload.c | 13 ++++---------
> 2 files changed, 9 insertions(+), 10 deletions(-)
>
> diff --git a/net/core/skbuff.c b/net/core/skbuff.c
> index c16615b..29dc763 100644
> --- a/net/core/skbuff.c
> +++ b/net/core/skbuff.c
> @@ -3020,7 +3020,7 @@ struct sk_buff *skb_segment(struct sk_buff *head_skb,
> len, 0);
> SKB_GSO_CB(nskb)->csum_start =
> skb_headroom(nskb) + doffset;
> - continue;
> + goto set_owner;
> }
>
> nskb_frag = skb_shinfo(nskb)->frags;
> @@ -3092,6 +3092,10 @@ perform_csum_check:
> SKB_GSO_CB(nskb)->csum_start =
> skb_headroom(nskb) + doffset;
> }
> +
> +set_owner:
> + if (head_skb->sk)
> + skb_set_owner_w(nskb, head_skb->sk);
> } while ((offset += len) < head_skb->len);
>
> /* Some callers want to get the end of the list.
> diff --git a/net/ipv4/tcp_offload.c b/net/ipv4/tcp_offload.c
> index 5b90f2f..93758a8 100644
> --- a/net/ipv4/tcp_offload.c
> +++ b/net/ipv4/tcp_offload.c
> @@ -139,11 +139,8 @@ struct sk_buff *tcp_gso_segment(struct sk_buff *skb,
> th->check = gso_make_checksum(skb, ~th->check);
>
> seq += mss;
> - if (copy_destructor) {
> + if (copy_destructor)
> skb->destructor = gso_skb->destructor;
> - skb->sk = gso_skb->sk;
> - sum_truesize += skb->truesize;
> - }
> skb = skb->next;
> th = tcp_hdr(skb);
>
> @@ -157,11 +154,9 @@ struct sk_buff *tcp_gso_segment(struct sk_buff *skb,
> * is freed by GSO engine
> */
> if (copy_destructor) {
> - swap(gso_skb->sk, skb->sk);
> - swap(gso_skb->destructor, skb->destructor);
> - sum_truesize += skb->truesize;
> - atomic_add(sum_truesize - gso_skb->truesize,
> - &skb->sk->sk_wmem_alloc);
> + skb->destructor = gso_skb->destructor;
> + gso_skb->destructor = NULL;
> + atomic_sub(gso_skb->truesize, &skb->sk->sk_wmem_alloc);
> }
>
> delta = htonl(oldlen + (skb_tail_pointer(skb) -
Please rewrite your patch to move the code out of tcp_gso_segment() into
skb_segment()
Look how I carefully avoided many atomic operations on
sk->sk_wmem_alloc, but how you removed it. :(
Alternative would be to use a single skb_set_owner_w() on the last
segment, and tweak its truesize to not corrupt sk->sk_wmem_alloc
d6a4a1041176 was needed for people using GSO=off TSO=off on a bonding
device, while best performance is reached with TSO=on so that
segmentation is performed later on the slave device.
Thanks
^ permalink raw reply
* Re: [PATCH 2/5] stmmac: pci: use managed resources
From: Giuseppe CAVALLARO @ 2014-10-27 15:28 UTC (permalink / raw)
To: Andy Shevchenko, Sergei Shtylyov
Cc: netdev, Kweh Hock Leong, David S. Miller, Vince Bridgers,
Rayagond K
In-Reply-To: <1413966993.2396.26.camel@linux.intel.com>
On 10/22/2014 10:36 AM, Andy Shevchenko wrote:
> So, I was trying to find any specification on public regarding to boards
> that have this IP, no luck so far. I guess that that code was created
> due to XILINX FPGA usage which probably can provide any BAR user wants
> to. Thus, I imply that in real applications the BAR most probably will
> be 0. However, I left variable which can be overridden in future
> (regarding to PCI ID).
>
> It would be nice to hear someone from ST about this. Giuseppe?
Hello Andy
this chip is on ST SoCs since long time but embedded. I have no PCI
card. Added Rayagond on copy too
peppe
^ permalink raw reply
* [PATCH iproute2] man ip: Add missing '-details' option
From: Vadim Kochan @ 2014-10-27 15:22 UTC (permalink / raw)
To: netdev; +Cc: Vadim Kochan
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
---
man/man8/ip.8 | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/man/man8/ip.8 b/man/man8/ip.8
index 9065b3a..2d42e98 100644
--- a/man/man8/ip.8
+++ b/man/man8/ip.8
@@ -59,6 +59,10 @@ appears twice or more, the amount of information increases.
As a rule, the information is statistics or some time values.
.TP
+.BR "\-d" , " \-details"
+Output more detailed information.
+
+.TP
.BR "\-l" , " \-loops " <COUNT>
Specify maximum number of loops the 'ip addr flush' logic
will attempt before giving up. The default is 10.
--
2.1.0
^ permalink raw reply related
* Re: Poor UDP throughput with virtual devices and UFO
From: Eric Dumazet @ 2014-10-27 15:39 UTC (permalink / raw)
To: Toshiaki Makita; +Cc: netdev, Herbert Xu, Eric Dumazet
In-Reply-To: <1414422089.16231.8.camel@edumazet-glaptop2.roam.corp.google.com>
On Mon, 2014-10-27 at 08:01 -0700, Eric Dumazet wrote:
> Please rewrite your patch to move the code out of tcp_gso_segment() into
> skb_segment()
>
> Look how I carefully avoided many atomic operations on
> sk->sk_wmem_alloc, but how you removed it. :(
>
> Alternative would be to use a single skb_set_owner_w() on the last
> segment, and tweak its truesize to not corrupt sk->sk_wmem_alloc
>
> d6a4a1041176 was needed for people using GSO=off TSO=off on a bonding
> device, while best performance is reached with TSO=on so that
> segmentation is performed later on the slave device.
Hmm.. I meant 6ff50cd55545d92 ("tcp: gso: do not generate out of order
packets")
I think I will test an alternative patch and send it, keeping you as the
author if you do not mind.
Thanks.
^ permalink raw reply
* Re: [PATCH v2 09/15] net: dsa: Add support for switch EEPROM access
From: Guenter Roeck @ 2014-10-27 15:42 UTC (permalink / raw)
To: Andrew Lunn; +Cc: netdev, David S. Miller, Florian Fainelli, linux-kernel
In-Reply-To: <20141027135917.GA12627@lunn.ch>
On Mon, Oct 27, 2014 at 02:59:17PM +0100, Andrew Lunn wrote:
> > So lets take a step back: For the Marvell chips, I have to provide both length
> > and presence in devicetree or platform data. Presence seemed to be implied by
> > length, so I used only a single property and variable to indicate both.
>
> Hi Guenter
>
> What i was thinking, is that you don't need length in device tree. The
> datasheet specifies how big the EEPROM needs to be.
>
> However, i read the datasheet for the 6060, the only public datasheet
> from Marvell. It does not work as i expected. Rather than being a
> fixed list of register values, it is a variable length list of
> command/value pairs.
>
> In this situation, yes, you do need the length in DT.
>
Correct. The 6352 supports "2K bit (93C56) or 4K bit (93C66) 4-wire EEPROM
devices as well as 1K bit (24C01), 2K bit (24C02) or 4K bit (24C04) 2-wire
EEPROM", so the length can be anything from 128 to 512 bytes.
> I had a quick look at some other switch chips. e.g. the RTL8100. It
> has a fixed layout of its EEPROM, consisting of 0x80 bytes. In this
> case, the switch driver could be hard coded with 0x80, and all DT
> needs to indicate is if the EEPROM is present or not.
>
> So, what you have proposed will work. It is maybe not optimal in the
> case of a well defined in the datasheet fixed size EEPROM, but it
> still works.
>
> Acked-by: Andrew Lunn <andrew@lunn.ch>
>
Thanks!
Guenter
^ permalink raw reply
* [PATCH v3] ipv6: notify userspace when we added or changed an ipv6 token
From: Lubomir Rintel @ 2014-10-27 16:39 UTC (permalink / raw)
To: netdev
Cc: David S. Miller, Lubomir Rintel, Hannes Frederic Sowa,
Daniel Borkmann
In-Reply-To: <544D8234.5060504@redhat.com>
NetworkManager might want to know that it changed when the router advertisement
arrives.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Daniel Borkmann <dborkman@redhat.com>
---
Changes since v1:
- Do not call device notifier chain with netdev_state_change()
Changes since v2:
- inet6_ifinfo_notify() instead of rtmsg_ifinfo()
net/ipv6/addrconf.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 3e118df..d9269ef 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -4528,6 +4528,7 @@ static int inet6_set_iftoken(struct inet6_dev *idev, struct in6_addr *token)
}
write_unlock_bh(&idev->lock);
+ inet6_ifinfo_notify(RTM_NEWLINK, idev);
addrconf_verify_rtnl();
return 0;
}
--
1.9.3
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox