* [patch net-next v2 3/4] net: move vlan pop/push functions into common code
From: Jiri Pirko @ 2014-11-12 14:52 UTC (permalink / raw)
To: netdev
Cc: davem, jhs, pshelar, therbert, edumazet, willemb, dborkman, mst,
fw, Paul.Durrant, tgraf
In-Reply-To: <1415803950-9838-1-git-send-email-jiri@resnulli.us>
So it can be used from out of openvswitch code.
Did couple of cosmetic changes on the way, namely variable naming and
adding support for 8021AD proto.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
---
v1->v2:
- adjusted to fix recent ovs changes
- included change to use make_writable suggested by Eric
include/linux/skbuff.h | 2 ++
net/core/skbuff.c | 78 +++++++++++++++++++++++++++++++++++++++++++++
net/openvswitch/actions.c | 81 +++++------------------------------------------
3 files changed, 88 insertions(+), 73 deletions(-)
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index e045516..78c299f 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -2679,6 +2679,8 @@ unsigned int skb_gso_transport_seglen(const struct sk_buff *skb);
struct sk_buff *skb_segment(struct sk_buff *skb, netdev_features_t features);
struct sk_buff *skb_vlan_untag(struct sk_buff *skb);
int skb_ensure_writable(struct sk_buff *skb, int write_len);
+int skb_vlan_pop(struct sk_buff *skb);
+int skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci);
struct skb_checksum_ops {
__wsum (*update)(const void *mem, int len, __wsum wsum);
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index d11bbe0..c7d3000 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -4163,6 +4163,84 @@ int skb_ensure_writable(struct sk_buff *skb, int write_len)
}
EXPORT_SYMBOL(skb_ensure_writable);
+/* remove VLAN header from packet and update csum accordingly. */
+static int __skb_vlan_pop(struct sk_buff *skb, u16 *vlan_tci)
+{
+ struct vlan_hdr *vhdr;
+ int err;
+
+ err = skb_ensure_writable(skb, VLAN_ETH_HLEN);
+ if (unlikely(err))
+ return err;
+
+ skb_postpull_rcsum(skb, skb->data + (2 * ETH_ALEN), VLAN_HLEN);
+
+ vhdr = (struct vlan_hdr *)(skb->data + ETH_HLEN);
+ *vlan_tci = ntohs(vhdr->h_vlan_TCI);
+
+ memmove(skb->data + VLAN_HLEN, skb->data, 2 * ETH_ALEN);
+ __skb_pull(skb, VLAN_HLEN);
+
+ vlan_set_encap_proto(skb, vhdr);
+ skb->mac_header += VLAN_HLEN;
+ if (skb_network_offset(skb) < ETH_HLEN)
+ skb_set_network_header(skb, ETH_HLEN);
+ skb_reset_mac_len(skb);
+
+ return 0;
+}
+
+int skb_vlan_pop(struct sk_buff *skb)
+{
+ u16 vlan_tci;
+ __be16 vlan_proto;
+ int err;
+
+ if (likely(vlan_tx_tag_present(skb))) {
+ skb->vlan_tci = 0;
+ } else {
+ if (unlikely((skb->protocol != htons(ETH_P_8021Q) &&
+ skb->protocol != htons(ETH_P_8021AD)) ||
+ skb->len < VLAN_ETH_HLEN))
+ return 0;
+
+ err = __skb_vlan_pop(skb, &vlan_tci);
+ if (err)
+ return err;
+ }
+ /* move next vlan tag to hw accel tag */
+ if (likely((skb->protocol != htons(ETH_P_8021Q) &&
+ skb->protocol != htons(ETH_P_8021AD)) ||
+ skb->len < VLAN_ETH_HLEN))
+ return 0;
+
+ vlan_proto = skb->protocol;
+ err = __skb_vlan_pop(skb, &vlan_tci);
+ if (unlikely(err))
+ return err;
+
+ __vlan_hwaccel_put_tag(skb, vlan_proto, vlan_tci);
+ return 0;
+}
+EXPORT_SYMBOL(skb_vlan_pop);
+
+int skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci)
+{
+ if (vlan_tx_tag_present(skb)) {
+ /* push down current VLAN tag */
+ if (!__vlan_put_tag(skb, skb->vlan_proto,
+ vlan_tx_tag_get(skb)))
+ return -ENOMEM;
+
+ if (skb->ip_summed == CHECKSUM_COMPLETE)
+ skb->csum = csum_add(skb->csum, csum_partial(skb->data
+ + (2 * ETH_ALEN), VLAN_HLEN, 0));
+ }
+ __vlan_hwaccel_put_tag(skb, vlan_proto, vlan_tci);
+ return 0;
+}
+EXPORT_SYMBOL(skb_vlan_push);
+
/**
* alloc_skb_with_frags - allocate skb with page frags
*
diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c
index 04c9680..e1a5182 100644
--- a/net/openvswitch/actions.c
+++ b/net/openvswitch/actions.c
@@ -206,91 +206,26 @@ static int set_mpls(struct sk_buff *skb, struct sw_flow_key *key,
return 0;
}
-/* remove VLAN header from packet and update csum accordingly. */
-static int __pop_vlan_tci(struct sk_buff *skb, __be16 *current_tci)
-{
- struct vlan_hdr *vhdr;
- int err;
-
- err = skb_ensure_writable(skb, VLAN_ETH_HLEN);
- if (unlikely(err))
- return err;
-
- skb_postpull_rcsum(skb, skb->data + (2 * ETH_ALEN), VLAN_HLEN);
-
- vhdr = (struct vlan_hdr *)(skb->data + ETH_HLEN);
- *current_tci = vhdr->h_vlan_TCI;
-
- memmove(skb->data + VLAN_HLEN, skb->data, 2 * ETH_ALEN);
- __skb_pull(skb, VLAN_HLEN);
-
- vlan_set_encap_proto(skb, vhdr);
- skb->mac_header += VLAN_HLEN;
-
- if (skb_network_offset(skb) < ETH_HLEN)
- skb_set_network_header(skb, ETH_HLEN);
-
- /* Update mac_len for subsequent MPLS actions */
- skb_reset_mac_len(skb);
- return 0;
-}
-
static int pop_vlan(struct sk_buff *skb, struct sw_flow_key *key)
{
- __be16 tci;
int err;
- if (likely(vlan_tx_tag_present(skb))) {
- skb->vlan_tci = 0;
- } else {
- if (unlikely(skb->protocol != htons(ETH_P_8021Q) ||
- skb->len < VLAN_ETH_HLEN))
- return 0;
-
- err = __pop_vlan_tci(skb, &tci);
- if (err)
- return err;
- }
- /* move next vlan tag to hw accel tag */
- if (likely(skb->protocol != htons(ETH_P_8021Q) ||
- skb->len < VLAN_ETH_HLEN)) {
+ err = skb_vlan_pop(skb);
+ if (vlan_tx_tag_present(skb))
+ invalidate_flow_key(key);
+ else
key->eth.tci = 0;
- return 0;
- }
-
- invalidate_flow_key(key);
- err = __pop_vlan_tci(skb, &tci);
- if (unlikely(err))
- return err;
-
- __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), ntohs(tci));
- return 0;
+ return err;
}
static int push_vlan(struct sk_buff *skb, struct sw_flow_key *key,
const struct ovs_action_push_vlan *vlan)
{
- if (unlikely(vlan_tx_tag_present(skb))) {
- u16 current_tag;
-
- /* push down current VLAN tag */
- current_tag = vlan_tx_tag_get(skb);
-
- if (!__vlan_put_tag(skb, skb->vlan_proto, current_tag))
- return -ENOMEM;
- /* Update mac_len for subsequent MPLS actions */
- skb->mac_len += VLAN_HLEN;
-
- if (skb->ip_summed == CHECKSUM_COMPLETE)
- skb->csum = csum_add(skb->csum, csum_partial(skb->data
- + (2 * ETH_ALEN), VLAN_HLEN, 0));
-
+ if (vlan_tx_tag_present(skb))
invalidate_flow_key(key);
- } else {
+ else
key->eth.tci = vlan->vlan_tci;
- }
- __vlan_hwaccel_put_tag(skb, vlan->vlan_tpid, ntohs(vlan->vlan_tci) & ~VLAN_TAG_PRESENT);
- return 0;
+ return skb_vlan_push(skb, vlan->vlan_tpid, ntohs(vlan->vlan_tci) & ~VLAN_TAG_PRESENT);
}
static int set_eth_addr(struct sk_buff *skb, struct sw_flow_key *key,
--
1.9.3
^ permalink raw reply related
* [patch net-next v2 4/4] sched: introduce vlan action
From: Jiri Pirko @ 2014-11-12 14:52 UTC (permalink / raw)
To: netdev
Cc: davem, jhs, pshelar, therbert, edumazet, willemb, dborkman, mst,
fw, Paul.Durrant, tgraf
In-Reply-To: <1415803950-9838-1-git-send-email-jiri@resnulli.us>
This tc action allows to work with vlan tagged skbs. Two supported
sub-actions are header pop and header push.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
---
v1->v2:
- fixed protocol dumping in tcf_vlan_dump
include/net/tc_act/tc_vlan.h | 27 +++++
include/uapi/linux/tc_act/tc_vlan.h | 35 ++++++
net/sched/Kconfig | 11 ++
net/sched/Makefile | 1 +
net/sched/act_vlan.c | 207 ++++++++++++++++++++++++++++++++++++
5 files changed, 281 insertions(+)
create mode 100644 include/net/tc_act/tc_vlan.h
create mode 100644 include/uapi/linux/tc_act/tc_vlan.h
create mode 100644 net/sched/act_vlan.c
diff --git a/include/net/tc_act/tc_vlan.h b/include/net/tc_act/tc_vlan.h
new file mode 100644
index 0000000..c809c1d
--- /dev/null
+++ b/include/net/tc_act/tc_vlan.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2014 Jiri Pirko <jiri@resnulli.us>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __NET_TC_VLAN_H
+#define __NET_TC_VLAN_H
+
+#include <net/act_api.h>
+
+#define VLAN_F_POP 0x1
+#define VLAN_F_PUSH 0x2
+
+struct tcf_vlan {
+ struct tcf_common common;
+ int tcfv_action;
+ __be16 tcfv_push_vid;
+ __be16 tcfv_push_proto;
+};
+#define to_vlan(a) \
+ container_of(a->priv, struct tcf_vlan, common)
+
+#endif /* __NET_TC_VLAN_H */
diff --git a/include/uapi/linux/tc_act/tc_vlan.h b/include/uapi/linux/tc_act/tc_vlan.h
new file mode 100644
index 0000000..f7b8d44
--- /dev/null
+++ b/include/uapi/linux/tc_act/tc_vlan.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2014 Jiri Pirko <jiri@resnulli.us>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_TC_VLAN_H
+#define __LINUX_TC_VLAN_H
+
+#include <linux/pkt_cls.h>
+
+#define TCA_ACT_VLAN 12
+
+#define TCA_VLAN_ACT_POP 1
+#define TCA_VLAN_ACT_PUSH 2
+
+struct tc_vlan {
+ tc_gen;
+ int v_action;
+};
+
+enum {
+ TCA_VLAN_UNSPEC,
+ TCA_VLAN_TM,
+ TCA_VLAN_PARMS,
+ TCA_VLAN_PUSH_VLAN_ID,
+ TCA_VLAN_PUSH_VLAN_PROTOCOL,
+ __TCA_VLAN_MAX,
+};
+#define TCA_VLAN_MAX (__TCA_VLAN_MAX - 1)
+
+#endif
diff --git a/net/sched/Kconfig b/net/sched/Kconfig
index a1a8e29..88618f8 100644
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -686,6 +686,17 @@ config NET_ACT_CSUM
To compile this code as a module, choose M here: the
module will be called act_csum.
+config NET_ACT_VLAN
+ tristate "Vlan manipulation"
+ depends on NET_CLS_ACT
+ ---help---
+ Say Y here to push or pop vlan headers.
+
+ If unsure, say N.
+
+ To compile this code as a module, choose M here: the
+ module will be called act_vlan.
+
config NET_CLS_IND
bool "Incoming device classification"
depends on NET_CLS_U32 || NET_CLS_FW
diff --git a/net/sched/Makefile b/net/sched/Makefile
index 0a869a1..679f24a 100644
--- a/net/sched/Makefile
+++ b/net/sched/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_NET_ACT_PEDIT) += act_pedit.o
obj-$(CONFIG_NET_ACT_SIMP) += act_simple.o
obj-$(CONFIG_NET_ACT_SKBEDIT) += act_skbedit.o
obj-$(CONFIG_NET_ACT_CSUM) += act_csum.o
+obj-$(CONFIG_NET_ACT_VLAN) += act_vlan.o
obj-$(CONFIG_NET_SCH_FIFO) += sch_fifo.o
obj-$(CONFIG_NET_SCH_CBQ) += sch_cbq.o
obj-$(CONFIG_NET_SCH_HTB) += sch_htb.o
diff --git a/net/sched/act_vlan.c b/net/sched/act_vlan.c
new file mode 100644
index 0000000..d735ecf
--- /dev/null
+++ b/net/sched/act_vlan.c
@@ -0,0 +1,207 @@
+/*
+ * Copyright (c) 2014 Jiri Pirko <jiri@resnulli.us>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/skbuff.h>
+#include <linux/rtnetlink.h>
+#include <linux/if_vlan.h>
+#include <net/netlink.h>
+#include <net/pkt_sched.h>
+
+#include <linux/tc_act/tc_vlan.h>
+#include <net/tc_act/tc_vlan.h>
+
+#define VLAN_TAB_MASK 15
+
+static int tcf_vlan(struct sk_buff *skb, const struct tc_action *a,
+ struct tcf_result *res)
+{
+ struct tcf_vlan *v = a->priv;
+ int action;
+ int err;
+
+ spin_lock(&v->tcf_lock);
+ v->tcf_tm.lastuse = jiffies;
+ bstats_update(&v->tcf_bstats, skb);
+ action = v->tcf_action;
+
+ switch (v->tcfv_action) {
+ case TCA_VLAN_ACT_POP:
+ err = skb_vlan_pop(skb);
+ if (err)
+ goto drop;
+ break;
+ case TCA_VLAN_ACT_PUSH:
+ err = skb_vlan_push(skb, v->tcfv_push_proto, v->tcfv_push_vid);
+ if (err)
+ goto drop;
+ break;
+ default:
+ BUG();
+ }
+
+ goto unlock;
+
+drop:
+ action = TC_ACT_SHOT;
+ v->tcf_qstats.drops++;
+unlock:
+ spin_unlock(&v->tcf_lock);
+ return action;
+}
+
+static const struct nla_policy vlan_policy[TCA_VLAN_MAX + 1] = {
+ [TCA_VLAN_PARMS] = { .len = sizeof(struct tc_vlan) },
+ [TCA_VLAN_PUSH_VLAN_ID] = { .type = NLA_U16 },
+ [TCA_VLAN_PUSH_VLAN_PROTOCOL] = { .type = NLA_U16 },
+};
+
+static int tcf_vlan_init(struct net *net, struct nlattr *nla,
+ struct nlattr *est, struct tc_action *a,
+ int ovr, int bind)
+{
+ struct nlattr *tb[TCA_VLAN_MAX + 1];
+ struct tc_vlan *parm;
+ struct tcf_vlan *v;
+ int action;
+ __be16 push_vid = 0;
+ __be16 push_proto = 0;
+ int ret = 0;
+ int err;
+
+ if (!nla)
+ return -EINVAL;
+
+ err = nla_parse_nested(tb, TCA_VLAN_MAX, nla, vlan_policy);
+ if (err < 0)
+ return err;
+
+ if (!tb[TCA_VLAN_PARMS])
+ return -EINVAL;
+ parm = nla_data(tb[TCA_VLAN_PARMS]);
+ switch (parm->v_action) {
+ case TCA_VLAN_ACT_POP:
+ break;
+ case TCA_VLAN_ACT_PUSH:
+ if (!tb[TCA_VLAN_PUSH_VLAN_ID])
+ return -EINVAL;
+ push_vid = nla_get_u16(tb[TCA_VLAN_PUSH_VLAN_ID]);
+ if (push_vid >= VLAN_VID_MASK)
+ return -ERANGE;
+
+ if (tb[TCA_VLAN_PUSH_VLAN_PROTOCOL]) {
+ push_proto = nla_get_be16(tb[TCA_VLAN_PUSH_VLAN_PROTOCOL]);
+ switch (push_proto) {
+ case htons(ETH_P_8021Q):
+ case htons(ETH_P_8021AD):
+ break;
+ default:
+ return -EPROTONOSUPPORT;
+ }
+ } else {
+ push_proto = htons(ETH_P_8021Q);
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+ action = parm->v_action;
+
+ if (!tcf_hash_check(parm->index, a, bind)) {
+ ret = tcf_hash_create(parm->index, est, a, sizeof(*v), bind);
+ if (ret)
+ return ret;
+
+ ret = ACT_P_CREATED;
+ } else {
+ if (bind)
+ return 0;
+ tcf_hash_release(a, bind);
+ if (!ovr)
+ return -EEXIST;
+ }
+
+ v = to_vlan(a);
+
+ spin_lock_bh(&v->tcf_lock);
+
+ v->tcfv_action = action;
+ v->tcfv_push_vid = push_vid;
+ v->tcfv_push_proto = push_proto;
+
+ v->tcf_action = parm->action;
+
+ spin_unlock_bh(&v->tcf_lock);
+
+ if (ret == ACT_P_CREATED)
+ tcf_hash_insert(a);
+ return ret;
+}
+
+static int tcf_vlan_dump(struct sk_buff *skb, struct tc_action *a,
+ int bind, int ref)
+{
+ unsigned char *b = skb_tail_pointer(skb);
+ struct tcf_vlan *v = a->priv;
+ struct tc_vlan opt = {
+ .index = v->tcf_index,
+ .refcnt = v->tcf_refcnt - ref,
+ .bindcnt = v->tcf_bindcnt - bind,
+ .action = v->tcf_action,
+ .v_action = v->tcfv_action,
+ };
+ struct tcf_t t;
+
+ if (nla_put(skb, TCA_VLAN_PARMS, sizeof(opt), &opt))
+ goto nla_put_failure;
+
+ if (v->tcfv_action == TCA_VLAN_ACT_PUSH &&
+ (nla_put_u16(skb, TCA_VLAN_PUSH_VLAN_ID, v->tcfv_push_vid) ||
+ nla_put_be16(skb, TCA_VLAN_PUSH_VLAN_PROTOCOL, v->tcfv_push_proto)))
+ goto nla_put_failure;
+
+ t.install = jiffies_to_clock_t(jiffies - v->tcf_tm.install);
+ t.lastuse = jiffies_to_clock_t(jiffies - v->tcf_tm.lastuse);
+ t.expires = jiffies_to_clock_t(v->tcf_tm.expires);
+ if (nla_put(skb, TCA_VLAN_TM, sizeof(t), &t))
+ goto nla_put_failure;
+ return skb->len;
+
+nla_put_failure:
+ nlmsg_trim(skb, b);
+ return -1;
+}
+
+static struct tc_action_ops act_vlan_ops = {
+ .kind = "vlan",
+ .type = TCA_ACT_VLAN,
+ .owner = THIS_MODULE,
+ .act = tcf_vlan,
+ .dump = tcf_vlan_dump,
+ .init = tcf_vlan_init,
+};
+
+static int __init vlan_init_module(void)
+{
+ return tcf_register_action(&act_vlan_ops, VLAN_TAB_MASK);
+}
+
+static void __exit vlan_cleanup_module(void)
+{
+ tcf_unregister_action(&act_vlan_ops);
+}
+
+module_init(vlan_init_module);
+module_exit(vlan_cleanup_module);
+
+MODULE_AUTHOR("Jiri Pirko <jiri@resnulli.us>");
+MODULE_DESCRIPTION("vlan manipulation actions");
+MODULE_LICENSE("GPL v2");
--
1.9.3
^ permalink raw reply related
* [patch iproute2] tc: add support for vlan tc action
From: Jiri Pirko @ 2014-11-12 14:55 UTC (permalink / raw)
To: netdev
Cc: davem, jhs, pshelar, therbert, edumazet, willemb, dborkman, mst,
fw, Paul.Durrant, tgraf
In-Reply-To: <1415803950-9838-4-git-send-email-jiri@resnulli.us>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
v1->v2:
- included changes suggested by Jamal
---
include/linux/tc_act/tc_vlan.h | 35 +++++++
tc/Makefile | 1 +
tc/m_vlan.c | 221 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 257 insertions(+)
create mode 100644 include/linux/tc_act/tc_vlan.h
create mode 100644 tc/m_vlan.c
diff --git a/include/linux/tc_act/tc_vlan.h b/include/linux/tc_act/tc_vlan.h
new file mode 100644
index 0000000..f7b8d44
--- /dev/null
+++ b/include/linux/tc_act/tc_vlan.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2014 Jiri Pirko <jiri@resnulli.us>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __LINUX_TC_VLAN_H
+#define __LINUX_TC_VLAN_H
+
+#include <linux/pkt_cls.h>
+
+#define TCA_ACT_VLAN 12
+
+#define TCA_VLAN_ACT_POP 1
+#define TCA_VLAN_ACT_PUSH 2
+
+struct tc_vlan {
+ tc_gen;
+ int v_action;
+};
+
+enum {
+ TCA_VLAN_UNSPEC,
+ TCA_VLAN_TM,
+ TCA_VLAN_PARMS,
+ TCA_VLAN_PUSH_VLAN_ID,
+ TCA_VLAN_PUSH_VLAN_PROTOCOL,
+ __TCA_VLAN_MAX,
+};
+#define TCA_VLAN_MAX (__TCA_VLAN_MAX - 1)
+
+#endif
diff --git a/tc/Makefile b/tc/Makefile
index 1ab36c6..830c97d 100644
--- a/tc/Makefile
+++ b/tc/Makefile
@@ -40,6 +40,7 @@ TCMODULES += m_pedit.o
TCMODULES += m_skbedit.o
TCMODULES += m_csum.o
TCMODULES += m_simple.o
+TCMODULES += m_vlan.o
TCMODULES += p_ip.o
TCMODULES += p_icmp.o
TCMODULES += p_tcp.o
diff --git a/tc/m_vlan.c b/tc/m_vlan.c
new file mode 100644
index 0000000..872bf72
--- /dev/null
+++ b/tc/m_vlan.c
@@ -0,0 +1,221 @@
+/*
+ * m_vlan.c vlan manipulation module
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Authors: Jiri Pirko <jiri@resnulli.us>
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <string.h>
+#include <linux/if_ether.h>
+#include "utils.h"
+#include "rt_names.h"
+#include "tc_util.h"
+#include <linux/tc_act/tc_vlan.h>
+
+static void explain(void)
+{
+ fprintf(stderr, "Usage: vlan pop\n");
+ fprintf(stderr, " vlan push [ protocol VLANPROTO ] id VLANID\n");
+ fprintf(stderr, " VLANPROTO is one of 802.1Q or 802.1AD\n");
+ fprintf(stderr, " with default: 802.1Q\n");
+}
+
+static void usage(void)
+{
+ explain();
+ exit(-1);
+}
+
+static int parse_vlan(struct action_util *a, int *argc_p, char ***argv_p,
+ int tca_id, struct nlmsghdr *n)
+{
+ int argc = *argc_p;
+ char **argv = *argv_p;
+ struct rtattr *tail;
+ int action = 0;
+ __u16 id;
+ int id_set = 0;
+ __u16 proto;
+ int proto_set = 0;
+ struct tc_vlan parm = { 0 };
+
+ if (matches(*argv, "vlan") != 0)
+ return -1;
+
+ NEXT_ARG();
+
+ while (argc > 0) {
+ if (matches(*argv, "pop") == 0) {
+ if (action) {
+ fprintf(stderr, "unexpexted \"%s\" - action already specified\n",
+ *argv);
+ explain();
+ return -1;
+ }
+ action = TCA_VLAN_ACT_POP;
+ } else if (matches(*argv, "push") == 0) {
+ if (action) {
+ fprintf(stderr, "unexpexted \"%s\" - action already specified\n",
+ *argv);
+ explain();
+ return -1;
+ }
+ action = TCA_VLAN_ACT_PUSH;
+ } else if (matches(*argv, "id") == 0) {
+ if (action != TCA_VLAN_ACT_PUSH) {
+ fprintf(stderr, "\"%s\" is only valid for push\n",
+ *argv);
+ explain();
+ return -1;
+ }
+ NEXT_ARG();
+ if (get_u16(&id, *argv, 0))
+ invarg("id is invalid", *argv);
+ id_set = 1;
+ } else if (matches(*argv, "protocol") == 0) {
+ if (action != TCA_VLAN_ACT_PUSH) {
+ fprintf(stderr, "\"%s\" is only valid for push\n",
+ *argv);
+ explain();
+ return -1;
+ }
+ NEXT_ARG();
+ if (ll_proto_a2n(&proto, *argv))
+ invarg("protocol is invalid", *argv);
+ proto_set = 1;
+ } else if (matches(*argv, "help") == 0) {
+ usage();
+ } else {
+ break;
+ }
+ argc--;
+ argv++;
+ }
+
+ parm.action = TC_ACT_PIPE;
+ if (argc) {
+ if (matches(*argv, "reclassify") == 0) {
+ parm.action = TC_ACT_RECLASSIFY;
+ NEXT_ARG();
+ } else if (matches(*argv, "pipe") == 0) {
+ parm.action = TC_ACT_PIPE;
+ NEXT_ARG();
+ } else if (matches(*argv, "drop") == 0 ||
+ matches(*argv, "shot") == 0) {
+ parm.action = TC_ACT_SHOT;
+ NEXT_ARG();
+ } else if (matches(*argv, "continue") == 0) {
+ parm.action = TC_ACT_UNSPEC;
+ NEXT_ARG();
+ } else if (matches(*argv, "pass") == 0) {
+ parm.action = TC_ACT_OK;
+ NEXT_ARG();
+ }
+ }
+
+ if (argc) {
+ if (matches(*argv, "index") == 0) {
+ NEXT_ARG();
+ if (get_u32(&parm.index, *argv, 10)) {
+ fprintf(stderr, "vlan: Illegal \"index\"\n");
+ return -1;
+ }
+ argc--;
+ argv++;
+ }
+ }
+
+ if (action == TCA_VLAN_ACT_PUSH && !id_set) {
+ fprintf(stderr, "id needs to be set for push\n");
+ explain();
+ return -1;
+ }
+
+ parm.v_action = action;
+ tail = NLMSG_TAIL(n);
+ addattr_l(n, MAX_MSG, tca_id, NULL, 0);
+ addattr_l(n, MAX_MSG, TCA_VLAN_PARMS, &parm, sizeof(parm));
+ if (id_set)
+ addattr_l(n, MAX_MSG, TCA_VLAN_PUSH_VLAN_ID, &id, 2);
+ if (proto_set) {
+ if (proto != htons(ETH_P_8021Q) &&
+ proto != htons(ETH_P_8021AD)) {
+ fprintf(stderr, "protocol not supported\n");
+ explain();
+ return -1;
+ }
+
+ addattr_l(n, MAX_MSG, TCA_VLAN_PUSH_VLAN_PROTOCOL, &proto, 2);
+ }
+ tail->rta_len = (char *)NLMSG_TAIL(n) - (char *)tail;
+
+ *argc_p = argc;
+ *argv_p = argv;
+ return 0;
+}
+
+static int print_vlan(struct action_util *au, FILE *f, struct rtattr *arg)
+{
+ SPRINT_BUF(b1);
+ struct rtattr *tb[TCA_VLAN_MAX + 1];
+ __u16 val;
+ struct tc_vlan *parm;
+
+ if (arg == NULL)
+ return -1;
+
+ parse_rtattr_nested(tb, TCA_VLAN_MAX, arg);
+
+ if (!tb[TCA_VLAN_PARMS]) {
+ fprintf(f, "[NULL vlan parameters]");
+ return -1;
+ }
+ parm = RTA_DATA(tb[TCA_VLAN_PARMS]);
+
+ fprintf(f, " vlan");
+
+ switch(parm->v_action) {
+ case TCA_VLAN_ACT_POP:
+ fprintf(f, " pop");
+ break;
+ case TCA_VLAN_ACT_PUSH:
+ fprintf(f, " push");
+ if (tb[TCA_VLAN_PUSH_VLAN_ID]) {
+ val = rta_getattr_u16(tb[TCA_VLAN_PUSH_VLAN_ID]);
+ fprintf(f, " id %u", val);
+ }
+ if (tb[TCA_VLAN_PUSH_VLAN_PROTOCOL]) {
+ fprintf(f, " protocol %s",
+ ll_proto_n2a(rta_getattr_u16(tb[TCA_VLAN_PUSH_VLAN_PROTOCOL]),
+ b1, sizeof(b1)));
+ }
+ break;
+ }
+
+ fprintf(f, "\n\t index %d ref %d bind %d", parm->index, parm->refcnt,
+ parm->bindcnt);
+
+ if (show_stats) {
+ if (tb[TCA_VLAN_TM]) {
+ struct tcf_t *tm = RTA_DATA(tb[TCA_VLAN_TM]);
+ print_tm(f, tm);
+ }
+ }
+
+ fprintf(f, "\n ");
+
+ return 0;
+}
+
+struct action_util vlan_action_util = {
+ .id = "vlan",
+ .parse_aopt = parse_vlan,
+ .print_aopt = print_vlan,
+};
--
1.9.3
^ permalink raw reply related
* Re: [PATCH -next 2/2] seq_putc: Convert to return void and convert uses too.
From: Corey Minyard @ 2014-11-12 15:25 UTC (permalink / raw)
To: Joe Perches, Steven Rostedt, Alexander Viro, Pablo Neira Ayuso,
Patrick McHardy, Jozsef Kadlecsik
Cc: Hideaki YOSHIFUJI, netdev, James Morris, Petr Mladek,
linux-kernel, coreteam, netfilter-devel, linux-fsdevel,
Alexey Kuznetsov, openipmi-developer, David S. Miller
In-Reply-To: <56c4c0d5ec721134cff4913e5e3f8923169c35ef.1415645477.git.joe@perches.com>
Ok by me for the IPMI part.
Reviewed-by: Corey Minyard <cminyard@mvista.com>
On 11/10/2014 12:58 PM, Joe Perches wrote:
> Using the return value of seq_putc is error-prone, so
> make it return void instead.
>
> Reverse the logic in seq_putc to make it like seq_puts.
>
> Signed-off-by: Joe Perches <joe@perches.com>
> ---
> drivers/char/ipmi/ipmi_msghandler.c | 4 +++-
> fs/seq_file.c | 11 ++++++-----
> include/linux/seq_file.h | 2 +-
> net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c | 4 +++-
> net/netfilter/nf_conntrack_expect.c | 4 +++-
> 5 files changed, 16 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
> index f816211..c12fb30 100644
> --- a/drivers/char/ipmi/ipmi_msghandler.c
> +++ b/drivers/char/ipmi/ipmi_msghandler.c
> @@ -1953,7 +1953,9 @@ static int smi_ipmb_proc_show(struct seq_file *m, void *v)
> seq_printf(m, "%x", intf->channels[0].address);
> for (i = 1; i < IPMI_MAX_CHANNELS; i++)
> seq_printf(m, " %x", intf->channels[i].address);
> - return seq_putc(m, '\n');
> + seq_putc(m, '\n');
> +
> + return 0;
> }
>
> static int smi_ipmb_proc_open(struct inode *inode, struct file *file)
> diff --git a/fs/seq_file.c b/fs/seq_file.c
> index e6be05a..5ca5af9 100644
> --- a/fs/seq_file.c
> +++ b/fs/seq_file.c
> @@ -673,13 +673,14 @@ int seq_open_private(struct file *filp, const struct seq_operations *ops,
> }
> EXPORT_SYMBOL(seq_open_private);
>
> -int seq_putc(struct seq_file *m, char c)
> +void seq_putc(struct seq_file *m, char c)
> {
> - if (m->count < m->size) {
> - m->buf[m->count++] = c;
> - return 0;
> + if (m->count >= m->size) {
> + seq_set_overflow(m);
> + return;
> }
> - return -1;
> +
> + m->buf[m->count++] = c;
> }
> EXPORT_SYMBOL(seq_putc);
>
> diff --git a/include/linux/seq_file.h b/include/linux/seq_file.h
> index 9b02cb6..c1e47ff 100644
> --- a/include/linux/seq_file.h
> +++ b/include/linux/seq_file.h
> @@ -115,7 +115,7 @@ ssize_t seq_read(struct file *, char __user *, size_t, loff_t *);
> loff_t seq_lseek(struct file *, loff_t, int);
> int seq_release(struct inode *, struct file *);
> int seq_escape(struct seq_file *, const char *, const char *);
> -int seq_putc(struct seq_file *m, char c);
> +void seq_putc(struct seq_file *m, char c);
> void seq_puts(struct seq_file *m, const char *s);
> int seq_write(struct seq_file *seq, const void *data, size_t len);
>
> diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c
> index a460a87..f0dfe92 100644
> --- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c
> +++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4_compat.c
> @@ -300,7 +300,9 @@ static int exp_seq_show(struct seq_file *s, void *v)
> __nf_ct_l3proto_find(exp->tuple.src.l3num),
> __nf_ct_l4proto_find(exp->tuple.src.l3num,
> exp->tuple.dst.protonum));
> - return seq_putc(s, '\n');
> + seq_putc(s, '\n');
> +
> + return 0;
> }
>
> static const struct seq_operations exp_seq_ops = {
> diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c
> index 91a1837..7a17070 100644
> --- a/net/netfilter/nf_conntrack_expect.c
> +++ b/net/netfilter/nf_conntrack_expect.c
> @@ -561,7 +561,9 @@ static int exp_seq_show(struct seq_file *s, void *v)
> helper->expect_policy[expect->class].name);
> }
>
> - return seq_putc(s, '\n');
> + seq_putc(s, '\n');
> +
> + return 0;
> }
>
> static const struct seq_operations exp_seq_ops = {
------------------------------------------------------------------------------
Comprehensive Server Monitoring with Site24x7.
Monitor 10 servers for $9/Month.
Get alerted through email, SMS, voice calls or mobile push notifications.
Take corrective actions from your mobile device.
http://pubads.g.doubleclick.net/gampad/clk?id=154624111&iu=/4140/ostg.clktrk
^ permalink raw reply
* randconfig build error with next-20141112, in net/openvswitch
From: Jim Davis @ 2014-11-12 15:43 UTC (permalink / raw)
To: Stephen Rothwell, linux-next, linux-kernel, netdev,
David S. Miller, pshelar, dev
[-- Attachment #1: Type: text/plain, Size: 162 bytes --]
Building with the attached random configuration file,
ERROR: "ip_route_output_flow" [net/openvswitch/openvswitch.ko] undefined!
make[1]: *** [__modpost] Error 1
[-- Attachment #2: randconfig-1415803014.txt --]
[-- Type: text/plain, Size: 86348 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 3.18.0-rc4 Kernel Configuration
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
# CONFIG_ZONE_DMA32 is not set
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-ecx -fcall-saved-edx"
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_COMPILE_TEST=y
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_FHANDLE=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
# CONFIG_AUDITSYSCALL is not set
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_LEGACY_ALLOC_HWIRQ=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_HZ_PERIODIC=y
# CONFIG_NO_HZ_IDLE is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
# CONFIG_TASK_XACCT is not set
#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_TASKS_RCU is not set
# CONFIG_RCU_STALL_COMMON is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_CGROUPS is not set
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_IPC_NS is not set
CONFIG_USER_NS=y
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_LTO_MENU is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
# CONFIG_UID16 is not set
CONFIG_OBSOLETE_SYSCALLS=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_PRINTK is not set
# CONFIG_BUG is not set
# CONFIG_PCSPKR_PLATFORM is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
CONFIG_EVENTFD=y
CONFIG_BPF_SYSCALL=y
CONFIG_SHMEM=y
# CONFIG_AIO is not set
# CONFIG_ADVISE_SYSCALLS is not set
CONFIG_NTP=y
# CONFIG_PCI_QUIRKS is not set
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=m
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
CONFIG_OPTPROBES=y
CONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_CC_STACKPROTECTOR_NONE=y
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
# CONFIG_CC_STACKPROTECTOR_STRONG is not set
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_MODULE_SIG_ALL=y
CONFIG_MODULE_SIG_SHA1=y
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
# CONFIG_MODULE_SIG_SHA512 is not set
CONFIG_MODULE_SIG_HASH="sha1"
# CONFIG_MODULE_COMPRESS is not set
# CONFIG_BLOCK is not set
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_USE_QUEUE_RWLOCK=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
# CONFIG_SMP is not set
# CONFIG_X86_MODEL_TABLE is not set
CONFIG_X86_FEATURE_NAMES=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_IOSF_MBI is not set
CONFIG_X86_32_IRIS=m
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=5
CONFIG_X86_L1_CACHE_SHIFT=5
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=5
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_HPET_TIMER is not set
CONFIG_DMI=y
CONFIG_NR_CPUS=1
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_X86_16BIT is not set
CONFIG_TOSHIBA=y
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
# CONFIG_MICROCODE_INTEL_EARLY is not set
# CONFIG_MICROCODE_AMD_EARLY is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CLEANCACHE is not set
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
CONFIG_CMA_AREAS=7
CONFIG_ZPOOL=y
CONFIG_ZBUD=m
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_HIGHPTE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_ARCH_RANDOM is not set
# CONFIG_X86_SMAP is not set
CONFIG_EFI=y
# CONFIG_EFI_STUB is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_SCHED_HRTICK is not set
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
CONFIG_PM_WAKELOCKS=y
CONFIG_PM_WAKELOCKS_LIMIT=100
# CONFIG_PM_WAKELOCKS_GC is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_EC_DEBUGFS=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_DEBUG=y
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=m
CONFIG_ACPI_CUSTOM_METHOD=y
CONFIG_ACPI_BGRT=y
CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
# CONFIG_ACPI_APEI_GHES is not set
# CONFIG_ACPI_APEI_PCIEAER is not set
CONFIG_ACPI_APEI_EINJ=y
CONFIG_ACPI_APEI_ERST_DEBUG=m
CONFIG_SFI=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
CONFIG_APM_IGNORE_USER_SUSPEND=y
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_ALLOW_INTS is not set
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_CPU_IDLE_GOV_MENU is not set
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=m
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=m
# CONFIG_HT_IRQ is not set
CONFIG_PCI_ATS=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_PRI=y
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y
#
# PCI host controller drivers
#
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_ALIX=y
CONFIG_NET5501=y
# CONFIG_GEOS is not set
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
# CONFIG_YENTA_O2 is not set
# CONFIG_YENTA_RICOH is not set
CONFIG_YENTA_TI=y
# CONFIG_YENTA_ENE_TUNE is not set
# CONFIG_YENTA_TOSHIBA is not set
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_COMPAQ=m
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
CONFIG_HOTPLUG_PCI_IBM=m
# CONFIG_HOTPLUG_PCI_ACPI is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y
CONFIG_RAPIDIO=m
CONFIG_RAPIDIO_TSI721=m
CONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set
CONFIG_RAPIDIO_DMA_ENGINE=y
# CONFIG_RAPIDIO_DEBUG is not set
CONFIG_RAPIDIO_ENUM_BASIC=m
#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_TSI57X=m
CONFIG_RAPIDIO_CPS_XX=m
CONFIG_RAPIDIO_TSI568=m
CONFIG_RAPIDIO_CPS_GEN2=m
CONFIG_X86_SYSFB=y
#
# Executable file formats / Emulations
#
# CONFIG_BINFMT_ELF is not set
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_BINFMT_SCRIPT is not set
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=m
# CONFIG_BINFMT_MISC is not set
# CONFIG_COREDUMP is not set
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_PMC_ATOM=y
CONFIG_NET=y
#
# Networking options
#
# CONFIG_PACKET is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_NET_KEY is not set
# CONFIG_INET is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
# CONFIG_NETFILTER is not set
CONFIG_ATM=y
CONFIG_ATM_LANE=m
CONFIG_MRP=y
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
CONFIG_NET_DSA=y
# CONFIG_NET_DSA_HWMON is not set
CONFIG_NET_DSA_TAG_BRCM=y
CONFIG_NET_DSA_TAG_DSA=y
CONFIG_NET_DSA_TAG_EDSA=y
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_PHONET=m
CONFIG_IEEE802154=y
# CONFIG_MAC802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
CONFIG_NET_SCH_ATM=y
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
# CONFIG_NET_SCH_DSMARK is not set
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=y
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_FQ is not set
CONFIG_NET_SCH_HHF=y
CONFIG_NET_SCH_PIE=y
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=y
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_BPF=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
CONFIG_NET_ACT_SIMP=y
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_VSOCKETS=y
CONFIG_NETLINK_MMAP=y
CONFIG_NETLINK_DIAG=m
CONFIG_NET_MPLS_GSO=m
# CONFIG_HSR is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
#
# Network testing
#
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=y
#
# IrDA protocols
#
CONFIG_IRLAN=m
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
#
# Dongle support
#
#
# FIR device drivers
#
CONFIG_NSC_FIR=y
CONFIG_WINBOND_FIR=y
CONFIG_TOSHIBA_FIR=y
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=y
# CONFIG_VIA_FIR is not set
CONFIG_SH_IRDA=y
CONFIG_BT=y
# CONFIG_BT_BREDR is not set
CONFIG_BT_LE=y
#
# Bluetooth device drivers
#
CONFIG_BT_HCIDTL1=m
# CONFIG_BT_HCIBT3C is not set
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=y
CONFIG_BT_MRVL=m
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_REG_DEBUG=y
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
# CONFIG_CFG80211_DEFAULT_PS is not set
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_INTERNAL_REGDB=y
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
CONFIG_LIB80211_DEBUG=y
CONFIG_MAC80211=m
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT=""
#
# Some wireless drivers require a rate control algorithm
#
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_MESSAGE_TRACING=y
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_NOINLINE=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
# CONFIG_MAC80211_MLME_DEBUG is not set
# CONFIG_MAC80211_STA_DEBUG is not set
CONFIG_MAC80211_HT_DEBUG=y
CONFIG_MAC80211_OCB_DEBUG=y
# CONFIG_MAC80211_IBSS_DEBUG is not set
# CONFIG_MAC80211_PS_DEBUG is not set
CONFIG_MAC80211_MPL_DEBUG=y
# CONFIG_MAC80211_MPATH_DEBUG is not set
# CONFIG_MAC80211_MHWMP_DEBUG is not set
CONFIG_MAC80211_MESH_SYNC_DEBUG=y
# CONFIG_MAC80211_MESH_CSA_DEBUG is not set
CONFIG_MAC80211_MESH_PS_DEBUG=y
CONFIG_MAC80211_TDLS_DEBUG=y
CONFIG_MAC80211_DEBUG_COUNTERS=y
CONFIG_WIMAX=y
CONFIG_WIMAX_DEBUG_LEVEL=8
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
CONFIG_RFKILL_REGULATOR=y
CONFIG_RFKILL_GPIO=m
# CONFIG_NET_9P is not set
CONFIG_CAIF=m
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=m
# CONFIG_CAIF_USB is not set
CONFIG_NFC=m
# CONFIG_NFC_DIGITAL is not set
# CONFIG_NFC_NCI is not set
CONFIG_NFC_HCI=m
CONFIG_NFC_SHDLC=y
#
# Near Field Communication (NFC) devices
#
# CONFIG_NFC_MEI_PHY is not set
# CONFIG_NFC_SIM is not set
CONFIG_NFC_PN544=m
CONFIG_NFC_PN544_I2C=m
CONFIG_NFC_MICROREAD=m
# CONFIG_NFC_MICROREAD_I2C is not set
CONFIG_NFC_ST21NFCA=m
CONFIG_NFC_ST21NFCA_I2C=m
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_ALLOW_DEV_COREDUMP is not set
CONFIG_DEBUG_DRIVER=y
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_SPMI=m
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set
CONFIG_DMA_CMA=y
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
#
# Bus devices
#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=m
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_OOPS=m
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
CONFIG_MTD_JEDECPROBE=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
CONFIG_MTD_MAP_BANK_WIDTH_8=y
CONFIG_MTD_MAP_BANK_WIDTH_16=y
CONFIG_MTD_MAP_BANK_WIDTH_32=y
# CONFIG_MTD_CFI_I1 is not set
# CONFIG_MTD_CFI_I2 is not set
CONFIG_MTD_CFI_I4=y
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_OTP=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=m
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_SC520CDP is not set
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=y
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_ESB2ROM=y
# CONFIG_MTD_CK804XROM is not set
# CONFIG_MTD_SCB2_FLASH is not set
CONFIG_MTD_NETtel=m
CONFIG_MTD_L440GX=y
CONFIG_MTD_INTEL_VR_NOR=m
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
CONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_DATAFLASH_WRITE_VERIFY=y
# CONFIG_MTD_DATAFLASH_OTP is not set
# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SST25L is not set
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTDRAM_ABS_POS=0
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
# CONFIG_MTD_NAND_ECC_BCH is not set
CONFIG_MTD_SM_COMMON=y
# CONFIG_MTD_NAND_DENALI is not set
CONFIG_MTD_NAND_GPIO=y
# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_RICOH=y
CONFIG_MTD_NAND_DISKONCHIP=m
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH is not set
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_DOCG4=y
# CONFIG_MTD_NAND_CAFE is not set
CONFIG_MTD_NAND_CS553X=y
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_NAND_SH_FLCTL is not set
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=m
CONFIG_MTD_ONENAND_OTP=y
CONFIG_MTD_ONENAND_2X_PROGRAM=y
#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=y
CONFIG_MTD_QINFO_PROBE=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
# CONFIG_AD525X_DPOT_SPI is not set
CONFIG_DUMMY_IRQ=y
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ATMEL_SSC=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_CS5535_MFGPT is not set
CONFIG_HP_ILO=y
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=y
CONFIG_ISL29020=y
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1780=y
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
CONFIG_DS1682=y
# CONFIG_TI_DAC7512 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_BMP085_SPI is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
CONFIG_LATTICE_ECP3_CONFIG=m
CONFIG_SRAM=y
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=m
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=y
# CONFIG_EEPROM_93XX46 is not set
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_SENSORS_LIS3_I2C=y
#
# Altera FPGA firmware download module
#
CONFIG_ALTERA_STAPL=m
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set
#
# Intel MIC Bus Driver
#
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
CONFIG_ECHO=y
# CONFIG_CXL_BASE is not set
CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_NOSY=m
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_CORE is not set
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
# CONFIG_ARCNET_1051 is not set
# CONFIG_ARCNET_RAW is not set
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
# CONFIG_ARCNET_COM20020 is not set
CONFIG_ATM_DRIVERS=y
CONFIG_ATM_DUMMY=m
CONFIG_ATM_LANAI=y
CONFIG_ATM_ENI=m
CONFIG_ATM_ENI_DEBUG=y
# CONFIG_ATM_ENI_TUNE_BURST is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
CONFIG_ATM_HORIZON=m
CONFIG_ATM_HORIZON_DEBUG=y
# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E=m
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
# CONFIG_ATM_HE is not set
CONFIG_ATM_SOLOS=y
#
# CAIF transport drivers
#
CONFIG_CAIF_SPI_SLAVE=m
CONFIG_CAIF_SPI_SYNC=y
CONFIG_CAIF_HSI=m
# CONFIG_CAIF_VIRTIO is not set
CONFIG_VHOST_NET=y
CONFIG_VHOST_RING=y
CONFIG_VHOST=y
#
# Distributed Switch Architecture drivers
#
CONFIG_NET_DSA_MV88E6XXX=y
# CONFIG_NET_DSA_MV88E6060 is not set
CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
CONFIG_NET_DSA_MV88E6131=m
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_NET_DSA_MV88E6171=m
CONFIG_NET_DSA_MV88E6352=m
CONFIG_NET_DSA_BCM_SF2=m
# CONFIG_ETHERNET is not set
# CONFIG_FDDI is not set
CONFIG_NET_SB1000=m
CONFIG_PHYLIB=y
#
# MII PHY device drivers
#
CONFIG_AT803X_PHY=m
CONFIG_AMD_PHY=y
# CONFIG_MARVELL_PHY is not set
CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
CONFIG_CICADA_PHY=y
# CONFIG_VITESSE_PHY is not set
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_BCM7XXX_PHY=m
CONFIG_BCM87XX_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=y
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
CONFIG_MICREL_PHY=y
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_MDIO_BCM_UNIMAC=m
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PPP is not set
#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
CONFIG_RTL8180=m
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
CONFIG_MWL8K=m
CONFIG_ATH_COMMON=m
CONFIG_ATH_CARDS=m
CONFIG_ATH_DEBUG=y
# CONFIG_ATH_TRACEPOINTS is not set
CONFIG_ATH5K=m
CONFIG_ATH5K_DEBUG=y
CONFIG_ATH5K_TRACER=y
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
# CONFIG_ATH9K_BTCOEX_SUPPORT is not set
CONFIG_ATH9K=m
# CONFIG_ATH9K_PCI is not set
# CONFIG_ATH9K_AHB is not set
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_STATION_STATISTICS=y
CONFIG_ATH9K_DYNACK=y
CONFIG_ATH9K_WOW=y
# CONFIG_ATH9K_RFKILL is not set
CONFIG_ATH9K_CHANNEL_CONTEXT=y
# CONFIG_ATH9K_PCOEM is not set
CONFIG_ATH6KL=m
CONFIG_ATH6KL_DEBUG=y
# CONFIG_ATH6KL_TRACING is not set
CONFIG_WIL6210=m
CONFIG_WIL6210_ISR_COR=y
# CONFIG_WIL6210_TRACING is not set
CONFIG_ATH10K=m
CONFIG_ATH10K_PCI=m
# CONFIG_ATH10K_DEBUG is not set
CONFIG_ATH10K_DEBUGFS=y
CONFIG_ATH10K_TRACING=y
CONFIG_WCN36XX=m
# CONFIG_WCN36XX_DEBUGFS is not set
CONFIG_B43=m
CONFIG_B43_BCMA=y
CONFIG_B43_SSB=y
CONFIG_B43_BUSES_BCMA_AND_SSB=y
# CONFIG_B43_BUSES_BCMA is not set
# CONFIG_B43_BUSES_SSB is not set
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_PCMCIA is not set
CONFIG_B43_BCMA_PIO=y
CONFIG_B43_PIO=y
# CONFIG_B43_PHY_G is not set
CONFIG_B43_PHY_N=y
# CONFIG_B43_PHY_LP is not set
# CONFIG_B43_PHY_HT is not set
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
CONFIG_B43_DEBUG=y
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_BRCMUTIL=m
CONFIG_BRCMSMAC=m
CONFIG_BRCMFMAC=m
CONFIG_BRCMFMAC_PROTO_MSGBUF=y
CONFIG_BRCMFMAC_PCIE=y
# CONFIG_BRCM_TRACING is not set
CONFIG_BRCMDBG=y
# CONFIG_HOSTAP is not set
CONFIG_IPW2100=m
# CONFIG_IPW2100_MONITOR is not set
CONFIG_IPW2100_DEBUG=y
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
CONFIG_IPW2200_DEBUG=y
CONFIG_LIBIPW=m
CONFIG_LIBIPW_DEBUG=y
CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
# CONFIG_IWLDVM is not set
# CONFIG_IWLMVM is not set
#
# WARNING: iwlwifi is useless without IWLDVM or IWLMVM
#
#
# Debugging Options
#
CONFIG_IWLWIFI_DEBUG=y
# CONFIG_IWLWIFI_DEBUGFS is not set
# CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_CS=m
# CONFIG_LIBERTAS_SPI is not set
CONFIG_LIBERTAS_DEBUG=y
# CONFIG_LIBERTAS_MESH is not set
CONFIG_HERMES=m
CONFIG_HERMES_PRISM=y
# CONFIG_HERMES_CACHE_FW_ON_INIT is not set
# CONFIG_PLX_HERMES is not set
CONFIG_TMD_HERMES=m
# CONFIG_NORTEL_HERMES is not set
# CONFIG_PCI_HERMES is not set
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_P54_COMMON=m
CONFIG_P54_PCI=m
CONFIG_P54_SPI=m
# CONFIG_P54_SPI_DEFAULT_EEPROM is not set
CONFIG_P54_LEDS=y
CONFIG_RT2X00=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
# CONFIG_RT61PCI is not set
# CONFIG_RT2800PCI is not set
CONFIG_RT2X00_LIB_MMIO=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_LEDS=y
CONFIG_RT2X00_LIB_DEBUGFS=y
CONFIG_RT2X00_DEBUG=y
CONFIG_RTL_CARDS=m
# CONFIG_RTL8192CE is not set
CONFIG_RTL8192SE=m
CONFIG_RTL8192DE=m
CONFIG_RTL8723AE=m
# CONFIG_RTL8723BE is not set
CONFIG_RTL8188EE=m
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
CONFIG_RTLWIFI=m
CONFIG_RTLWIFI_PCI=m
# CONFIG_RTLWIFI_DEBUG is not set
CONFIG_RTL8723_COMMON=m
CONFIG_RTLBTCOEXIST=m
# CONFIG_WL_TI is not set
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_PCIE=m
CONFIG_CW1200=m
# CONFIG_CW1200_WLAN_SPI is not set
# CONFIG_RSI_91X is not set
#
# WiMAX Wireless Broadband devices
#
#
# Enable USB support to see WiMAX USB drivers
#
# CONFIG_WAN is not set
# CONFIG_IEEE802154_DRIVERS is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5520 is not set
CONFIG_KEYBOARD_ADP5588=y
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=m
# CONFIG_KEYBOARD_QT1070 is not set
CONFIG_KEYBOARD_QT2160=y
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=m
# CONFIG_KEYBOARD_GPIO_POLLED is not set
CONFIG_KEYBOARD_TCA6416=m
CONFIG_KEYBOARD_TCA8418=y
CONFIG_KEYBOARD_MATRIX=m
# CONFIG_KEYBOARD_LM8323 is not set
CONFIG_KEYBOARD_LM8333=m
# CONFIG_KEYBOARD_MAX7359 is not set
CONFIG_KEYBOARD_MCS=m
CONFIG_KEYBOARD_MPR121=m
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=m
CONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_KEYBOARD_ST_KEYSCAN is not set
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_SH_KEYSC=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_KEYBOARD_CROS_EC=m
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_CYAPA is not set
CONFIG_MOUSE_ELAN_I2C=y
CONFIG_MOUSE_ELAN_I2C_I2C=y
# CONFIG_MOUSE_ELAN_I2C_SMBUS is not set
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_GPIO=m
CONFIG_MOUSE_SYNAPTICS_I2C=m
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_88PM860X=m
CONFIG_TOUCHSCREEN_ADS7846=y
# CONFIG_TOUCHSCREEN_AD7877 is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
CONFIG_TOUCHSCREEN_BU21013=y
# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
CONFIG_TOUCHSCREEN_DA9034=m
CONFIG_TOUCHSCREEN_DA9052=m
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
CONFIG_TOUCHSCREEN_HAMPSHIRE=m
CONFIG_TOUCHSCREEN_EETI=m
CONFIG_TOUCHSCREEN_FUJITSU=m
# CONFIG_TOUCHSCREEN_GOODIX is not set
# CONFIG_TOUCHSCREEN_ILI210X is not set
CONFIG_TOUCHSCREEN_GUNZE=y
CONFIG_TOUCHSCREEN_ELO=m
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_WACOM_I2C=m
CONFIG_TOUCHSCREEN_MAX11801=m
# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MMS114 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
CONFIG_TOUCHSCREEN_MK712=m
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
CONFIG_TOUCHSCREEN_EDT_FT5X06=y
CONFIG_TOUCHSCREEN_TOUCHRIGHT=y
CONFIG_TOUCHSCREEN_TOUCHWIN=y
CONFIG_TOUCHSCREEN_PIXCIR=y
CONFIG_TOUCHSCREEN_WM831X=y
CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_TOUCHSCREEN_TOUCHIT213=y
CONFIG_TOUCHSCREEN_TSC_SERIO=m
CONFIG_TOUCHSCREEN_TSC2005=y
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_TOUCHSCREEN_ST1232 is not set
CONFIG_TOUCHSCREEN_SUN4I=m
# CONFIG_TOUCHSCREEN_TPS6507X is not set
CONFIG_TOUCHSCREEN_ZFORCE=y
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=m
CONFIG_SERIO_OLPC_APSP=y
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_TTY is not set
CONFIG_DEVKMEM=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
# CONFIG_IPMI_SI_PROBE_DEFAULTS is not set
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=y
# CONFIG_RTC is not set
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
#
# PCMCIA character devices
#
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_PC8736x_GPIO=y
CONFIG_NSC_GPIO=y
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_XILLYBUS=m
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_ACPI_I2C_OPREGION is not set
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_PCA9541=m
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=y
CONFIG_I2C_ALI15X3=y
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
CONFIG_I2C_SCMI=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_AXXIA=y
CONFIG_I2C_CBUS_GPIO=m
# CONFIG_I2C_DESIGNWARE_PCI is not set
CONFIG_I2C_EFM32=y
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_KEMPLD=y
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PCA_PLATFORM=y
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_RIIC is not set
CONFIG_I2C_SH_MOBILE=m
# CONFIG_I2C_SIMTEC is not set
CONFIG_I2C_XILINX=m
# CONFIG_I2C_RCAR is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_CROS_EC_TUNNEL=y
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_STUB=m
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
CONFIG_SPI_ATMEL=y
# CONFIG_SPI_BCM2835 is not set
CONFIG_SPI_BCM63XX_HSSPI=y
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_CLPS711X is not set
CONFIG_SPI_EP93XX=m
CONFIG_SPI_GPIO=y
CONFIG_SPI_IMX=m
# CONFIG_SPI_FSL_DSPI is not set
CONFIG_SPI_OC_TINY=m
# CONFIG_SPI_TI_QSPI is not set
CONFIG_SPI_OMAP_100K=y
CONFIG_SPI_ORION=m
CONFIG_SPI_PXA2XX_DMA=y
CONFIG_SPI_PXA2XX=y
# CONFIG_SPI_PXA2XX_PCI is not set
# CONFIG_SPI_RSPI is not set
CONFIG_SPI_SC18IS602=m
CONFIG_SPI_SH=y
# CONFIG_SPI_SH_HSPI is not set
CONFIG_SPI_SUN4I=m
CONFIG_SPI_TOPCLIFF_PCH=y
CONFIG_SPI_TXX9=m
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_XTENSA_XTFPGA is not set
CONFIG_SPI_DESIGNWARE=y
CONFIG_SPI_DW_PCI=m
# CONFIG_SPI_DW_MID_DMA is not set
# CONFIG_SPI_DW_MMIO is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_SPMI=y
# CONFIG_HSI is not set
#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
CONFIG_NTP_PPS=y
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=m
CONFIG_PPS_CLIENT_GPIO=y
#
# PPS generators support
#
#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
# CONFIG_DP83640_PHY is not set
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_DA9052=y
CONFIG_GPIO_DA9055=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers:
#
CONFIG_GPIO_CLPS711X=y
CONFIG_GPIO_GENERIC_PLATFORM=m
CONFIG_GPIO_IT8761E=m
CONFIG_GPIO_F7188X=m
CONFIG_GPIO_SCH311X=m
CONFIG_GPIO_TS5500=y
# CONFIG_GPIO_SCH is not set
CONFIG_GPIO_ICH=m
CONFIG_GPIO_VX855=m
CONFIG_GPIO_LYNXPOINT=y
#
# I2C GPIO expanders:
#
CONFIG_GPIO_ARIZONA=y
CONFIG_GPIO_CRYSTAL_COVE=m
# CONFIG_GPIO_LP3943 is not set
# CONFIG_GPIO_MAX7300 is not set
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_RC5T583 is not set
CONFIG_GPIO_SX150X=y
# CONFIG_GPIO_TPS65912 is not set
# CONFIG_GPIO_WM831X is not set
CONFIG_GPIO_WM8994=m
# CONFIG_GPIO_ADP5520 is not set
CONFIG_GPIO_ADP5588=m
#
# PCI GPIO expanders:
#
CONFIG_GPIO_CS5535=m
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_INTEL_MID is not set
CONFIG_GPIO_PCH=m
CONFIG_GPIO_ML_IOH=m
# CONFIG_GPIO_TIMBERDALE is not set
CONFIG_GPIO_RDC321X=m
#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MCP23S08=y
CONFIG_GPIO_MC33880=y
#
# AC97 GPIO expanders:
#
#
# LPC GPIO expanders:
#
CONFIG_GPIO_KEMPLD=m
#
# MODULbus GPIO expanders:
#
# CONFIG_GPIO_JANZ_TTL is not set
# CONFIG_GPIO_PALMAS is not set
CONFIG_GPIO_TPS6586X=y
# CONFIG_GPIO_TPS65910 is not set
#
# USB GPIO expanders:
#
CONFIG_W1=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_MXC=m
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
#
# CONFIG_W1_SLAVE_THERM is not set
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2408 is not set
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=m
CONFIG_W1_SLAVE_DS2423=m
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=y
CONFIG_W1_SLAVE_DS2433_CRC=y
CONFIG_W1_SLAVE_DS2760=m
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=m
CONFIG_W1_SLAVE_DS28E04=y
CONFIG_W1_SLAVE_BQ27000=m
CONFIG_POWER_SUPPLY=y
CONFIG_POWER_SUPPLY_DEBUG=y
CONFIG_PDA_POWER=y
CONFIG_GENERIC_ADC_BATTERY=m
CONFIG_MAX8925_POWER=y
CONFIG_WM831X_BACKUP=m
# CONFIG_WM831X_POWER is not set
CONFIG_TEST_POWER=y
CONFIG_BATTERY_88PM860X=m
CONFIG_BATTERY_DS2760=m
CONFIG_BATTERY_DS2780=y
CONFIG_BATTERY_DS2781=m
CONFIG_BATTERY_DS2782=y
# CONFIG_BATTERY_SBS is not set
CONFIG_BATTERY_BQ27x00=m
CONFIG_BATTERY_BQ27X00_I2C=y
# CONFIG_BATTERY_BQ27X00_PLATFORM is not set
CONFIG_BATTERY_DA9030=y
# CONFIG_BATTERY_DA9052 is not set
CONFIG_BATTERY_MAX17040=m
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_88PM860X is not set
CONFIG_CHARGER_PCF50633=y
CONFIG_CHARGER_MAX8903=m
CONFIG_CHARGER_LP8727=y
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MAX14577=m
# CONFIG_CHARGER_MAX8997 is not set
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
# CONFIG_CHARGER_BQ24735 is not set
CONFIG_CHARGER_SMB347=m
CONFIG_BATTERY_GOLDFISH=y
# CONFIG_POWER_RESET is not set
CONFIG_POWER_AVS=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
CONFIG_HWMON_DEBUG_CHIP=y
#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=y
CONFIG_SENSORS_ABITUGURU3=y
# CONFIG_SENSORS_AD7314 is not set
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=y
# CONFIG_SENSORS_ADM1021 is not set
CONFIG_SENSORS_ADM1025=m
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=y
# CONFIG_SENSORS_ADM9240 is not set
CONFIG_SENSORS_ADT7X10=m
CONFIG_SENSORS_ADT7310=m
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=y
CONFIG_SENSORS_ADT7475=m
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=y
CONFIG_SENSORS_FAM15H_POWER=y
CONFIG_SENSORS_APPLESMC=m
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ATXP1=m
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DA9052_ADC is not set
CONFIG_SENSORS_DA9055=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
# CONFIG_SENSORS_MC13783_ADC is not set
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_GL518SM is not set
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=m
CONFIG_SENSORS_G762=m
CONFIG_SENSORS_GPIO_FAN=m
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IBMAEM=y
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_IIO_HWMON is not set
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=m
CONFIG_SENSORS_POWR1220=y
CONFIG_SENSORS_LINEAGE=y
CONFIG_SENSORS_LTC2945=y
CONFIG_SENSORS_LTC4151=y
# CONFIG_SENSORS_LTC4215 is not set
CONFIG_SENSORS_LTC4222=m
CONFIG_SENSORS_LTC4245=y
CONFIG_SENSORS_LTC4260=m
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX16065=y
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX1668 is not set
CONFIG_SENSORS_MAX197=m
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=y
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_HTU21 is not set
CONFIG_SENSORS_MCP3021=m
# CONFIG_SENSORS_MENF21BMC_HWMON is not set
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_LM63=y
# CONFIG_SENSORS_LM70 is not set
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=m
# CONFIG_SENSORS_LM83 is not set
CONFIG_SENSORS_LM85=m
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not set
CONFIG_SENSORS_LM95234=y
CONFIG_SENSORS_LM95241=y
CONFIG_SENSORS_LM95245=y
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_NTC_THERMISTOR is not set
CONFIG_SENSORS_NCT6683=m
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_PMBUS=y
# CONFIG_SENSORS_PMBUS is not set
CONFIG_SENSORS_ADM1275=y
CONFIG_SENSORS_LM25066=y
CONFIG_SENSORS_LTC2978=y
# CONFIG_SENSORS_LTC2978_REGULATOR is not set
# CONFIG_SENSORS_MAX16064 is not set
CONFIG_SENSORS_MAX34440=m
CONFIG_SENSORS_MAX8688=m
CONFIG_SENSORS_TPS40422=m
# CONFIG_SENSORS_UCD9000 is not set
CONFIG_SENSORS_UCD9200=m
CONFIG_SENSORS_ZL6100=y
CONFIG_SENSORS_PWM_FAN=m
CONFIG_SENSORS_SHT15=m
CONFIG_SENSORS_SHT21=y
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_EMC1403=y
CONFIG_SENSORS_EMC2103=y
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_SMSC47M192=y
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
# CONFIG_SENSORS_SCH5636 is not set
CONFIG_SENSORS_SMM665=m
CONFIG_SENSORS_ADC128D818=m
CONFIG_SENSORS_ADS1015=y
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_ADS7871=m
# CONFIG_SENSORS_AMC6821 is not set
CONFIG_SENSORS_INA209=m
# CONFIG_SENSORS_INA2XX is not set
CONFIG_SENSORS_THMC50=y
# CONFIG_SENSORS_TMP102 is not set
CONFIG_SENSORS_TMP103=m
# CONFIG_SENSORS_TMP401 is not set
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83795=m
CONFIG_SENSORS_W83795_FANCTRL=y
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_WM831X=y
#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_EMULATION=y
# CONFIG_RCAR_THERMAL is not set
# CONFIG_INTEL_POWERCLAMP is not set
CONFIG_INT340X_THERMAL=m
CONFIG_ACPI_THERMAL_REL=m
#
# Texas Instruments thermal drivers
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=y
CONFIG_DA9052_WATCHDOG=y
CONFIG_DA9055_WATCHDOG=y
CONFIG_MENF21BMC_WATCHDOG=m
CONFIG_WM831X_WATCHDOG=m
CONFIG_XILINX_WATCHDOG=y
# CONFIG_DW_WATCHDOG is not set
# CONFIG_RN5T618_WATCHDOG is not set
CONFIG_RETU_WATCHDOG=m
CONFIG_TEGRA_WATCHDOG=y
CONFIG_ACQUIRE_WDT=y
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
# CONFIG_ALIM7101_WDT is not set
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=y
CONFIG_SBC_FITPC2_WATCHDOG=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=y
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=y
CONFIG_IE6XX_WDT=y
# CONFIG_ITCO_WDT is not set
CONFIG_IT8712F_WDT=y
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=y
CONFIG_KEMPLD_WDT=m
CONFIG_HPWDT_NMI_DECODING=y
CONFIG_SC1200_WDT=m
# CONFIG_PC87413_WDT is not set
CONFIG_NV_TCO=y
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=y
# CONFIG_SBC7240_WDT is not set
CONFIG_CPU5_WDT=m
# CONFIG_SMSC_SCH311X_WDT is not set
CONFIG_SMSC37B787_WDT=y
CONFIG_VIA_WDT=m
# CONFIG_W83627HF_WDT is not set
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
# CONFIG_MACHZ_WDT is not set
CONFIG_SBC_EPX_C3_WATCHDOG=m
CONFIG_MEN_A21_WDT=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
# CONFIG_WDTPCI is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SILENT=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
CONFIG_BCMA=y
CONFIG_BCMA_BLOCKIO=y
CONFIG_BCMA_HOST_PCI_POSSIBLE=y
CONFIG_BCMA_HOST_PCI=y
# CONFIG_BCMA_HOST_SOC is not set
# CONFIG_BCMA_DRIVER_GMAC_CMN is not set
CONFIG_BCMA_DRIVER_GPIO=y
CONFIG_BCMA_DEBUG=y
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_CS5535=y
# CONFIG_MFD_AS3711 is not set
CONFIG_PMIC_ADP5520=y
# CONFIG_MFD_AAT2870_CORE is not set
CONFIG_MFD_BCM590XX=m
CONFIG_MFD_AXP20X=y
CONFIG_MFD_CROS_EC=y
# CONFIG_MFD_CROS_EC_I2C is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
# CONFIG_MFD_DA9063 is not set
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
# CONFIG_MFD_MC13XXX_I2C is not set
CONFIG_HTC_PASIC3=y
# CONFIG_HTC_I2CPLD is not set
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=y
CONFIG_INTEL_SOC_PMIC=y
CONFIG_MFD_JANZ_CMODIO=m
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=m
# CONFIG_MFD_88PM805 is not set
CONFIG_MFD_88PM860X=y
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX8907=m
CONFIG_MFD_MAX8925=y
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MENF21BMC=y
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_RETU=m
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=m
CONFIG_PCF50633_GPIO=y
CONFIG_MFD_RDC321X=y
CONFIG_MFD_RTSX_PCI=m
CONFIG_MFD_RC5T583=y
CONFIG_MFD_RN5T618=y
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
CONFIG_ABX500_CORE=y
# CONFIG_AB3100_CORE is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TI_AM335X_TSCADC is not set
CONFIG_MFD_LP3943=y
CONFIG_MFD_LP8788=y
CONFIG_MFD_PALMAS=y
# CONFIG_TPS6105X is not set
CONFIG_TPS65010=y
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
CONFIG_MFD_TPS65217=y
CONFIG_MFD_TPS65218=m
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
CONFIG_MFD_TPS65912=y
CONFIG_MFD_TPS65912_I2C=y
# CONFIG_MFD_TPS65912_SPI is not set
CONFIG_MFD_TPS80031=y
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
CONFIG_MFD_TIMBERDALE=m
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM5102 is not set
CONFIG_MFD_WM5110=y
# CONFIG_MFD_WM8997 is not set
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
# CONFIG_MFD_WM831X_I2C is not set
CONFIG_MFD_WM831X_SPI=y
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=m
CONFIG_REGULATOR_88PM800=m
CONFIG_REGULATOR_88PM8607=y
CONFIG_REGULATOR_ACT8865=m
CONFIG_REGULATOR_AD5398=m
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_BCM590XX=m
CONFIG_REGULATOR_DA903X=y
# CONFIG_REGULATOR_DA9052 is not set
# CONFIG_REGULATOR_DA9055 is not set
CONFIG_REGULATOR_DA9210=m
CONFIG_REGULATOR_DA9211=m
# CONFIG_REGULATOR_FAN53555 is not set
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_ISL9305=m
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=m
# CONFIG_REGULATOR_LP872X is not set
# CONFIG_REGULATOR_LP8755 is not set
# CONFIG_REGULATOR_LP8788 is not set
CONFIG_REGULATOR_LTC3589=m
CONFIG_REGULATOR_MAX14577=m
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX8649 is not set
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8907=m
CONFIG_REGULATOR_MAX8925=y
CONFIG_REGULATOR_MAX8952=m
# CONFIG_REGULATOR_MAX8973 is not set
CONFIG_REGULATOR_MAX8997=m
# CONFIG_REGULATOR_MAX8998 is not set
# CONFIG_REGULATOR_MAX77686 is not set
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MAX77802=y
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
# CONFIG_REGULATOR_PALMAS is not set
CONFIG_REGULATOR_PBIAS=y
CONFIG_REGULATOR_PCF50633=y
# CONFIG_REGULATOR_PFUZE100 is not set
CONFIG_REGULATOR_RC5T583=y
CONFIG_REGULATOR_RN5T618=y
CONFIG_REGULATOR_TPS51632=y
# CONFIG_REGULATOR_TPS62360 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_REGULATOR_TPS65217 is not set
CONFIG_REGULATOR_TPS6524X=m
CONFIG_REGULATOR_TPS6586X=m
# CONFIG_REGULATOR_TPS65910 is not set
CONFIG_REGULATOR_TPS65912=y
# CONFIG_REGULATOR_TPS80031 is not set
CONFIG_REGULATOR_WM831X=y
# CONFIG_REGULATOR_WM8400 is not set
# CONFIG_REGULATOR_WM8994 is not set
CONFIG_MEDIA_SUPPORT=y
#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_SDR_SUPPORT is not set
CONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_FIXED_MINOR_RANGES=y
CONFIG_VIDEO_TUNER=y
CONFIG_V4L2_MEM2MEM_DEV=y
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_DMA_CONTIG=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_VIDEOBUF2_DMA_SG=y
# CONFIG_TTPCI_EEPROM is not set
#
# Media drivers
#
CONFIG_RC_CORE=y
# CONFIG_RC_MAP is not set
# CONFIG_RC_DECODERS is not set
# CONFIG_RC_DEVICES is not set
CONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#
CONFIG_VIDEO_MEYE=m
#
# Media capture/analog TV support
#
CONFIG_VIDEO_IVTV=y
# CONFIG_VIDEO_FB_IVTV is not set
CONFIG_VIDEO_ZORAN=y
# CONFIG_VIDEO_ZORAN_DC30 is not set
# CONFIG_VIDEO_ZORAN_ZR36060 is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_MXB=m
# CONFIG_VIDEO_TW68 is not set
#
# Media capture/analog/hybrid TV support
#
CONFIG_VIDEO_CX25821=m
CONFIG_VIDEO_CX88=y
CONFIG_VIDEO_CX88_BLACKBIRD=y
CONFIG_VIDEO_CX88_MPEG=y
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_SAA7134=y
# CONFIG_VIDEO_SAA7134_RC is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
CONFIG_V4L_MEM2MEM_DRIVERS=y
CONFIG_VIDEO_MEM2MEM_DEINTERLACE=y
CONFIG_VIDEO_SAMSUNG_S5P_G2D=y
# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set
# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set
CONFIG_VIDEO_MX2_EMMAPRP=m
# CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC is not set
CONFIG_VIDEO_SH_VEU=y
# CONFIG_VIDEO_TI_VPE is not set
CONFIG_V4L_TEST_DRIVERS=y
CONFIG_VIDEO_VIVID=m
CONFIG_VIDEO_VIM2M=y
#
# Supported MMC/SDIO adapters
#
CONFIG_VIDEO_CX2341X=y
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_TVEEPROM=y
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#
CONFIG_MEDIA_SUBDRV_AUTOSELECT=y
CONFIG_MEDIA_ATTACH=y
CONFIG_VIDEO_IR_I2C=y
#
# Audio decoders, processors and mixers
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=y
CONFIG_VIDEO_CS53L32A=y
CONFIG_VIDEO_WM8775=y
CONFIG_VIDEO_WM8739=y
CONFIG_VIDEO_VP27SMPX=y
#
# RDS decoders
#
CONFIG_VIDEO_SAA6588=y
#
# Video decoders
#
CONFIG_VIDEO_SAA711X=y
#
# Video and audio decoders
#
CONFIG_VIDEO_SAA717X=y
CONFIG_VIDEO_CX25840=y
#
# Video encoders
#
CONFIG_VIDEO_SAA7127=y
#
# Camera sensor devices
#
#
# Flash devices
#
#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=y
CONFIG_VIDEO_UPD64083=y
#
# Audio/Video compression chips
#
CONFIG_VIDEO_SAA6752HS=y
#
# Miscellaneous helper chips
#
CONFIG_VIDEO_M52790=y
#
# Sensors used on soc_camera driver
#
CONFIG_MEDIA_TUNER=y
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MC44S803=y
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=y
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=y
# CONFIG_AGP_VIA is not set
CONFIG_AGP_EFFICEON=m
CONFIG_INTEL_GTT=y
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
#
# Direct Rendering Manager
#
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=m
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
CONFIG_DRM_PTN3460=m
CONFIG_DRM_TDFX=m
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_NOUVEAU=m
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
# CONFIG_DRM_NOUVEAU_BACKLIGHT is not set
CONFIG_DRM_I810=m
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_I915_FBDEV is not set
# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_DRM_VMWGFX=m
# CONFIG_DRM_VMWGFX_FBCON is not set
CONFIG_DRM_GMA500=m
# CONFIG_DRM_GMA600 is not set
CONFIG_DRM_GMA3600=y
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
#
# Frame buffer Devices
#
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_DDC=m
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
CONFIG_FB_FOREIGN_ENDIAN=y
CONFIG_FB_BOTH_ENDIAN=y
# CONFIG_FB_BIG_ENDIAN is not set
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
CONFIG_FB_CLPS711X=m
# CONFIG_FB_CYBER2000 is not set
CONFIG_FB_ARC=m
CONFIG_FB_VGA16=m
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
# CONFIG_FB_OPENCORES is not set
CONFIG_FB_S1D13XXX=m
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
CONFIG_FB_RIVA_DEBUG=y
CONFIG_FB_RIVA_BACKLIGHT=y
# CONFIG_FB_I740 is not set
CONFIG_FB_I810=m
# CONFIG_FB_I810_GTF is not set
# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
CONFIG_FB_INTEL_DEBUG=y
# CONFIG_FB_INTEL_I2C is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=m
# CONFIG_FB_RADEON_I2C is not set
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
# CONFIG_FB_ATY_GX is not set
# CONFIG_FB_ATY_BACKLIGHT is not set
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
# CONFIG_FB_SIS_315 is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=m
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=m
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
CONFIG_FB_TMIO=m
# CONFIG_FB_TMIO_ACCELL is not set
CONFIG_FB_GOLDFISH=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=m
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
# CONFIG_FB_MB862XX_I2C is not set
CONFIG_FB_BROADSHEET=m
CONFIG_FB_AUO_K190X=m
# CONFIG_FB_AUO_K1900 is not set
CONFIG_FB_AUO_K1901=m
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=m
CONFIG_LCD_LMS283GF05=y
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI922X is not set
CONFIG_LCD_ILI9320=m
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=y
CONFIG_LCD_S6E63M0=y
CONFIG_LCD_LD9040=y
CONFIG_LCD_AMS369FG06=m
CONFIG_LCD_LMS501KF03=y
# CONFIG_LCD_HX8357 is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_LM3533=y
CONFIG_BACKLIGHT_DA903X=y
CONFIG_BACKLIGHT_DA9052=m
CONFIG_BACKLIGHT_MAX8925=m
CONFIG_BACKLIGHT_APPLE=m
CONFIG_BACKLIGHT_SAHARA=m
CONFIG_BACKLIGHT_WM831X=y
CONFIG_BACKLIGHT_ADP5520=m
# CONFIG_BACKLIGHT_ADP8860 is not set
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_88PM860X=m
CONFIG_BACKLIGHT_PCF50633=y
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_TPS65217=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=m
CONFIG_BACKLIGHT_BD6107=y
CONFIG_VGASTATE=m
CONFIG_VIDEOMODE_HELPERS=y
CONFIG_HDMI=y
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=y
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
# CONFIG_HID_APPLE is not set
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
# CONFIG_HID_CHERRY is not set
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=m
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
CONFIG_HID_GYRATION=y
# CONFIG_HID_ICADE is not set
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LCPOWER=y
CONFIG_HID_LENOVO=m
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_DJ is not set
CONFIG_HID_LOGITECH_HIDPP=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
CONFIG_HID_MULTITOUCH=y
# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
# CONFIG_HID_PICOLCD_FB is not set
CONFIG_HID_PICOLCD_BACKLIGHT=y
# CONFIG_HID_PICOLCD_LCD is not set
# CONFIG_HID_PICOLCD_LEDS is not set
CONFIG_HID_PICOLCD_CIR=y
# CONFIG_HID_PLANTRONICS is not set
CONFIG_HID_PRIMAX=m
CONFIG_HID_SAITEK=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=y
CONFIG_HID_RMI=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
# CONFIG_HID_SMARTJOYPLUS is not set
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=y
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_88PM860X=m
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3533 is not set
CONFIG_LEDS_LM3642=m
CONFIG_LEDS_PCA9532=y
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP55XX_COMMON=y
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
CONFIG_LEDS_LP5562=y
CONFIG_LEDS_LP8501=y
CONFIG_LEDS_LP8788=m
CONFIG_LEDS_CLEVO_MAIL=y
CONFIG_LEDS_PCA955X=m
CONFIG_LEDS_PCA963X=y
CONFIG_LEDS_WM831X_STATUS=m
CONFIG_LEDS_DA903X=m
CONFIG_LEDS_DA9052=y
CONFIG_LEDS_DAC124S085=y
CONFIG_LEDS_REGULATOR=y
CONFIG_LEDS_BD2802=m
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_ADP5520=m
CONFIG_LEDS_DELL_NETBOOKS=m
CONFIG_LEDS_MC13783=m
CONFIG_LEDS_TCA6507=m
CONFIG_LEDS_MAX8997=m
CONFIG_LEDS_LM355x=m
CONFIG_LEDS_OT200=y
CONFIG_LEDS_MENF21BMC=m
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
# CONFIG_LEDS_TRIGGER_CPU is not set
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=m
CONFIG_LEDS_TRIGGER_CAMERA=m
CONFIG_ACCESSIBILITY=y
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MM_EDAC is not set
# CONFIG_RTC_X86_CMOS_SYSTOHC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
CONFIG_DMADEVICES_DEBUG=y
CONFIG_DMADEVICES_VDEBUG=y
#
# DMA Devices
#
CONFIG_INTEL_MID_DMAC=m
CONFIG_INTEL_IOATDMA=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
# CONFIG_DW_DMAC_PCI is not set
CONFIG_AT_XDMAC=m
# CONFIG_SH_DMAE_BASE is not set
# CONFIG_TIMB_DMA is not set
CONFIG_PCH_DMA=y
CONFIG_NBPFAXI_DMA=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
CONFIG_DMATEST=m
CONFIG_DMA_ENGINE_RAID=y
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
# CONFIG_UIO is not set
CONFIG_VIRT_DRIVERS=y
CONFIG_VIRTIO=y
#
# Virtio drivers
#
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_MMIO=y
# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
CONFIG_ACERHDF=m
CONFIG_ALIENWARE_WMI=m
CONFIG_ASUS_LAPTOP=m
CONFIG_DELL_LAPTOP=m
CONFIG_DELL_WMI=m
CONFIG_DELL_WMI_AIO=m
# CONFIG_DELL_SMO8800 is not set
CONFIG_FUJITSU_LAPTOP=y
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_FUJITSU_TABLET=y
CONFIG_AMILO_RFKILL=m
CONFIG_TC1100_WMI=m
CONFIG_HP_ACCEL=y
# CONFIG_HP_WIRELESS is not set
CONFIG_HP_WMI=m
CONFIG_MSI_LAPTOP=y
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=y
CONFIG_SONYPI_COMPAT=y
CONFIG_IDEAPAD_LAPTOP=y
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
CONFIG_INTEL_MENLOW=m
CONFIG_EEEPC_LAPTOP=y
CONFIG_ASUS_WMI=m
CONFIG_ASUS_NB_WMI=m
CONFIG_EEEPC_WMI=m
CONFIG_ACPI_WMI=m
CONFIG_MSI_WMI=m
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_TOSHIBA_BT_RFKILL=m
CONFIG_TOSHIBA_HAPS=y
CONFIG_ACPI_CMPC=y
CONFIG_INTEL_IPS=m
# CONFIG_IBM_RTL is not set
CONFIG_XO1_RFKILL=m
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
# CONFIG_SAMSUNG_Q10 is not set
CONFIG_APPLE_GMUX=m
# CONFIG_INTEL_RST is not set
CONFIG_INTEL_SMARTCONNECT=m
CONFIG_PVPANIC=y
# CONFIG_CHROME_PLATFORMS is not set
#
# SOC (System On Chip) specific Drivers
#
# CONFIG_SOC_TI is not set
#
# Hardware Spinlock drivers
#
#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
# CONFIG_ATMEL_PIT is not set
# CONFIG_SH_TIMER_CMT is not set
CONFIG_SH_TIMER_MTU2=y
# CONFIG_SH_TIMER_TMU is not set
CONFIG_EM_TIMER_STI=y
CONFIG_MAILBOX=y
CONFIG_IOMMU_SUPPORT=y
#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers
#
#
# SOC (System On Chip) specific Drivers
#
# CONFIG_PM_DEVFREQ is not set
CONFIG_EXTCON=m
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=m
# CONFIG_EXTCON_GPIO is not set
# CONFIG_EXTCON_MAX14577 is not set
# CONFIG_EXTCON_MAX77693 is not set
# CONFIG_EXTCON_MAX8997 is not set
CONFIG_EXTCON_PALMAS=m
# CONFIG_EXTCON_RT8973A is not set
CONFIG_EXTCON_SM5502=m
CONFIG_MEMORY=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
# CONFIG_IIO_BUFFER_CB is not set
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
#
# Accelerometers
#
# CONFIG_BMA180 is not set
# CONFIG_BMC150_ACCEL is not set
CONFIG_HID_SENSOR_ACCEL_3D=m
CONFIG_IIO_ST_ACCEL_3AXIS=y
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=y
CONFIG_IIO_ST_ACCEL_SPI_3AXIS=y
# CONFIG_KXSD9 is not set
CONFIG_MMA8452=y
CONFIG_KXCJK1013=m
#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
# CONFIG_AD7266 is not set
CONFIG_AD7291=m
# CONFIG_AD7298 is not set
CONFIG_AD7476=y
CONFIG_AD7791=y
CONFIG_AD7793=m
CONFIG_AD7887=m
# CONFIG_AD7923 is not set
# CONFIG_AD799X is not set
CONFIG_AXP288_ADC=y
# CONFIG_LP8788_ADC is not set
CONFIG_MAX1027=y
# CONFIG_MAX1363 is not set
# CONFIG_MCP320X is not set
CONFIG_MCP3422=m
CONFIG_MEN_Z188_ADC=m
CONFIG_NAU7802=y
CONFIG_QCOM_SPMI_IADC=m
CONFIG_TI_ADC081C=m
CONFIG_TI_ADC128S052=m
# CONFIG_XILINX_XADC is not set
#
# Amplifiers
#
# CONFIG_AD8366 is not set
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=m
CONFIG_HID_SENSOR_IIO_TRIGGER=m
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Digital to analog converters
#
# CONFIG_AD5064 is not set
CONFIG_AD5360=m
CONFIG_AD5380=y
CONFIG_AD5421=y
CONFIG_AD5446=y
CONFIG_AD5449=y
CONFIG_AD5504=m
CONFIG_AD5624R_SPI=m
CONFIG_AD5686=m
CONFIG_AD5755=y
# CONFIG_AD5764 is not set
# CONFIG_AD5791 is not set
CONFIG_AD7303=m
# CONFIG_MAX517 is not set
CONFIG_MCP4725=y
CONFIG_MCP4922=m
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
CONFIG_AD9523=m
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# CONFIG_ADF4350 is not set
#
# Digital gyroscope sensors
#
CONFIG_ADIS16080=m
CONFIG_ADIS16130=m
# CONFIG_ADIS16136 is not set
CONFIG_ADIS16260=y
CONFIG_ADXRS450=y
# CONFIG_BMG160 is not set
# CONFIG_HID_SENSOR_GYRO_3D is not set
# CONFIG_IIO_ST_GYRO_3AXIS is not set
# CONFIG_ITG3200 is not set
#
# Humidity sensors
#
# CONFIG_DHT11 is not set
# CONFIG_SI7005 is not set
# CONFIG_SI7020 is not set
#
# Inertial measurement units
#
CONFIG_ADIS16400=y
CONFIG_ADIS16480=y
CONFIG_INV_MPU6050_IIO=m
CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y
#
# Light sensors
#
CONFIG_ADJD_S311=m
CONFIG_AL3320A=m
CONFIG_APDS9300=m
CONFIG_CM32181=y
# CONFIG_CM36651 is not set
CONFIG_GP2AP020A00F=m
CONFIG_ISL29125=y
# CONFIG_HID_SENSOR_ALS is not set
# CONFIG_HID_SENSOR_PROX is not set
CONFIG_SENSORS_LM3533=m
# CONFIG_LTR501 is not set
CONFIG_TCS3414=y
CONFIG_TCS3472=y
CONFIG_SENSORS_TSL2563=y
# CONFIG_TSL4531 is not set
CONFIG_VCNL4000=m
#
# Magnetometer sensors
#
CONFIG_AK8975=m
# CONFIG_AK09911 is not set
CONFIG_MAG3110=y
# CONFIG_HID_SENSOR_MAGNETOMETER_3D is not set
CONFIG_IIO_ST_MAGN_3AXIS=m
CONFIG_IIO_ST_MAGN_I2C_3AXIS=m
CONFIG_IIO_ST_MAGN_SPI_3AXIS=m
#
# Inclinometer sensors
#
# CONFIG_HID_SENSOR_INCLINOMETER_3D is not set
# CONFIG_HID_SENSOR_DEVICE_ROTATION is not set
#
# Triggers - standalone
#
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
# CONFIG_IIO_SYSFS_TRIGGER is not set
#
# Pressure sensors
#
CONFIG_BMP280=y
CONFIG_HID_SENSOR_PRESS=m
CONFIG_MPL115=m
# CONFIG_MPL3115 is not set
# CONFIG_IIO_ST_PRESS is not set
CONFIG_T5403=m
#
# Lightning sensors
#
# CONFIG_AS3935 is not set
#
# Temperature sensors
#
CONFIG_MLX90614=y
CONFIG_TMP006=y
CONFIG_NTB=m
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_PHY_EXYNOS_MIPI_VIDEO=m
CONFIG_OMAP_CONTROL_PHY=m
CONFIG_BCM_KONA_USB2_PHY=y
# CONFIG_PHY_ST_SPEAR1310_MIPHY is not set
CONFIG_PHY_ST_SPEAR1340_MIPHY=m
# CONFIG_POWERCAP is not set
CONFIG_MCB=m
# CONFIG_MCB_PCI is not set
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set
#
# Android
#
# CONFIG_ANDROID is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_DELL_RBU=y
CONFIG_DCDBAS=y
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=m
CONFIG_EFI_VARS_PSTORE=m
# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
CONFIG_UEFI_CPER=y
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_FS_POSIX_ACL is not set
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAYFS_FS is not set
#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
CONFIG_FSCACHE_DEBUG=y
# CONFIG_FSCACHE_OBJECT_LIST is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ECRYPT_FS=y
# CONFIG_ECRYPT_FS_MESSAGING is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_UBIFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
CONFIG_PSTORE_CONSOLE=y
CONFIG_PSTORE_RAM=y
CONFIG_EFIVAR_FS=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=m
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=m
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
# CONFIG_NLS_ISO8859_7 is not set
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=y
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
# CONFIG_NLS_MAC_CELTIC is not set
CONFIG_NLS_MAC_CENTEURO=y
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
# CONFIG_NLS_MAC_GAELIC is not set
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=m
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
#
# Compile-time checks and compiler options
#
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=400
# CONFIG_DEBUG_KMEMLEAK_TEST is not set
# CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_VMACACHE=y
# CONFIG_DEBUG_VM_RB is not set
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_KMEMCHECK=y
# CONFIG_KMEMCHECK_DISABLED_BY_DEFAULT is not set
# CONFIG_KMEMCHECK_ENABLED_BY_DEFAULT is not set
CONFIG_KMEMCHECK_ONESHOT_BY_DEFAULT=y
CONFIG_KMEMCHECK_QUEUE_SIZE=64
CONFIG_KMEMCHECK_SHADOW_COPY_SHIFT=5
# CONFIG_KMEMCHECK_PARTIAL_OK is not set
CONFIG_KMEMCHECK_BITOPS_OK=y
# CONFIG_DEBUG_SHIRQ is not set
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_TIMER_STATS is not set
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_LOCK_TORTURE_TEST=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_KOBJECT=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_PROVE_RCU_REPEATEDLY=y
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_TORTURE_TEST=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_TRACE is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KPROBE_EVENT is not set
CONFIG_UPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
CONFIG_MMIOTRACE_TEST=m
# CONFIG_TRACEPOINT_BENCHMARK is not set
CONFIG_RING_BUFFER_BENCHMARK=m
CONFIG_RING_BUFFER_STARTUP_TEST=y
#
# Runtime Testing
#
CONFIG_TEST_LIST_SORT=y
# CONFIG_KPROBES_SANITY_TEST is not set
CONFIG_BACKTRACE_SELF_TEST=y
CONFIG_RBTREE_TEST=y
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_TEST_STRING_HELPERS is not set
CONFIG_TEST_KSTRTOX=y
CONFIG_TEST_RHASHTABLE=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_BUILD_DOCSRC is not set
CONFIG_DMA_API_DEBUG=y
# CONFIG_TEST_LKM is not set
CONFIG_TEST_USER_COPY=m
CONFIG_TEST_BPF=m
CONFIG_TEST_FIRMWARE=m
CONFIG_TEST_UDELAY=m
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_TRACE_EVENTS is not set
# CONFIG_SAMPLE_KOBJECT is not set
CONFIG_SAMPLE_KPROBES=m
# CONFIG_SAMPLE_KRETPROBES is not set
CONFIG_SAMPLE_HW_BREAKPOINT=m
CONFIG_SAMPLE_KFIFO=m
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
# CONFIG_KGDB_TESTS is not set
# CONFIG_KGDB_LOW_LEVEL_TRAP is not set
# CONFIG_KGDB_KDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not set
CONFIG_X86_PTDUMP=y
CONFIG_EFI_PGT_DUMP=y
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
CONFIG_DEBUG_NX_TEST=m
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_IOMMU_STRESS=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
CONFIG_CPA_DEBUG=y
# CONFIG_OPTIMIZE_INLINING is not set
CONFIG_DEBUG_NMI_SELFTEST=y
# CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_MCRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_ABLK_HELPER=y
CONFIG_CRYPTO_GLUE_HELPER_X86=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=y
#
# Hash modes
#
# CONFIG_CRYPTO_CMAC is not set
CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_AES_NI_INTEL=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAST_COMMON=m
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_SERPENT_SSE2_586=m
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_LZ4=m
# CONFIG_CRYPTO_LZ4HC is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=m
# CONFIG_CRYPTO_DRBG_HMAC is not set
CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=m
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
# CONFIG_CRYPTO_DEV_PADLOCK_AES is not set
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_CRYPTO_DEV_CCP is not set
CONFIG_CRYPTO_DEV_QAT=y
CONFIG_CRYPTO_DEV_QAT_DH895xCC=y
CONFIG_CRYPTO_DEV_QCE=m
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_PUBLIC_KEY_ALGO_RSA=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=m
# CONFIG_PKCS7_TEST_KEY is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_PERCPU_RWSEM=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_FLEX_ARRAY=y
CONFIG_RHASHTABLE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_CRC8=m
# CONFIG_CRC64_ECMA is not set
CONFIG_AUDIT_GENERIC=y
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
CONFIG_RANDOM32_SELFTEST=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=m
CONFIG_XZ_DEC=y
# CONFIG_XZ_DEC_X86 is not set
CONFIG_XZ_DEC_POWERPC=y
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
CONFIG_DDR=y
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=m
CONFIG_FONT_8x16=y
CONFIG_FONT_AUTOSELECT=y
CONFIG_ARCH_HAS_SG_CHAIN=y
^ permalink raw reply
* Re: [patch -next] amd-xgbe: fix ->rss_hash_type
From: Tom Lendacky @ 2014-11-12 15:45 UTC (permalink / raw)
To: Dan Carpenter; +Cc: netdev, kernel-janitors
In-Reply-To: <20141112083135.GA12795@mwanda>
On 11/12/2014 02:31 AM, Dan Carpenter wrote:
> There was a missing break statement so we set everything to
> PKT_HASH_TYPE_L3 even when we intended to use PKT_HASH_TYPE_L4.
>
> Fixes: 5b9dfe299e55 ('amd-xgbe: Provide support for receive side scaling')
> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
> ---
> This driver has a lot of Sparse endian warnings.
> http://lwn.net/Articles/205624/
I'll send a patch to address the endian warnings.
Thanks,
Tom
>
> diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
> index 7daa2cd..55ba1dc 100644
> --- a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
> +++ b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
> @@ -1601,6 +1601,7 @@ static int xgbe_dev_read(struct xgbe_channel *channel)
> case RX_DESC3_L34T_IPV6_UDP:
> packet->rss_hash_type = PKT_HASH_TYPE_L4;
>
> + break;
> default:
> packet->rss_hash_type = PKT_HASH_TYPE_L3;
> }
>
^ permalink raw reply
* [PATCH net-next] sunvnet: fix NULL pointer dereference
From: David L Stevens @ 2014-11-12 15:58 UTC (permalink / raw)
To: David Miller; +Cc: netdev, Sowmini Varadhan
This patch fixes a NULL pointer dereference when __tx_port_find() doesn't
find a matching port.
Signed-off-by: David L Stevens <david.stevens@oracle.com>
---
drivers/net/ethernet/sun/sunvnet.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/net/ethernet/sun/sunvnet.c b/drivers/net/ethernet/sun/sunvnet.c
index 55d66c9..a556eba 100644
--- a/drivers/net/ethernet/sun/sunvnet.c
+++ b/drivers/net/ethernet/sun/sunvnet.c
@@ -958,6 +958,8 @@ vnet_select_queue(struct net_device *dev, struct sk_buff *skb,
struct vnet *vp = netdev_priv(dev);
struct vnet_port *port = __tx_port_find(vp, skb);
+ if (port == NULL)
+ return 0;
return port->q_index;
}
--
1.7.1
^ permalink raw reply related
* [PATCH for 3.18] staging: r8188eu: Fix scheduling while atomic error introduced in commit fadbe0cd
From: Larry Finger @ 2014-11-12 16:07 UTC (permalink / raw)
To: gregkh; +Cc: devel, netdev, Larry Finger
In commit fadbe0cd5292851608e2e01b91d9295fa287b9fe entitled "staging:
rtl8188eu:Remove rtw_zmalloc(), wrapper for kzalloc()", the author failed
to note that the original code in the wrapper tested whether the caller
could sleep, and set the flags argument to kzalloc() appropriately.
After the patch, GFP_KERNEL is used unconditionally. Unfortunately, several
of the routines may be entered from an interrupt routine and generate
a BUG splat for every such call. Routine rtw_sitesurvey_cmd() is used in the
example below:
BUG: sleeping function called from invalid context at mm/slub.c:1240
in_atomic(): 1, irqs_disabled(): 0, pid: 756, name: wpa_supplicant
INFO: lockdep is turned off.
CPU: 2 PID: 756 Comm: wpa_supplicant Tainted: G WC O 3.18.0-rc4+ #34
Hardware name: TOSHIBA TECRA A50-A/TECRA A50-A, BIOS Version 4.20 04/17/2014
ffffc90005557000 ffff880216fafaa8 ffffffff816b0bbf 0000000000000000
ffff8800c3b58000 ffff880216fafac8 ffffffff8107af77 0000000000000001
0000000000000010 ffff880216fafb18 ffffffff811b06ce 0000000000000000
Call Trace:
[<ffffffff816b0bbf>] dump_stack+0x4e/0x71
[<ffffffff8107af77>] __might_sleep+0xf7/0x120
[<ffffffff811b06ce>] kmem_cache_alloc_trace+0x4e/0x1f0
[<ffffffffa0888226>] ? rtw_sitesurvey_cmd+0x56/0x2a0 [r8188eu]
[<ffffffffa0888226>] rtw_sitesurvey_cmd+0x56/0x2a0 [r8188eu]
[<ffffffffa088f00d>] rtw_do_join+0x22d/0x370 [r8188eu]
[<ffffffffa088f6e8>] rtw_set_802_11_ssid+0x218/0x3d0 [r8188eu]
[<ffffffffa08c3ca5>] rtw_wx_set_essid+0x1e5/0x410 [r8188eu]
[<ffffffffa08c3ac0>] ? rtw_wx_get_rate+0x50/0x50 [r8188eu]
[<ffffffff816938f1>] ioctl_standard_iw_point+0x151/0x3f0
[<ffffffff81693d52>] ioctl_standard_call+0xb2/0xe0
[<ffffffff81597df7>] ? rtnl_lock+0x17/0x20
[<ffffffff816945a0>] ? iw_handler_get_private+0x70/0x70
[<ffffffff81693ca0>] ? call_commit_handler+0x40/0x40
[<ffffffff81693256>] wireless_process_ioctl+0x176/0x1c0
[<ffffffff81693e79>] wext_handle_ioctl+0x69/0xc0
[<ffffffff8159fe79>] dev_ioctl+0x309/0x5e0
[<ffffffff810be9c7>] ? call_rcu+0x17/0x20
[<ffffffff8156a472>] sock_ioctl+0x142/0x2e0
[<ffffffff811e0c70>] do_vfs_ioctl+0x300/0x520
[<ffffffff81101514>] ? __audit_syscall_entry+0xb4/0x110
[<ffffffff81101514>] ? __audit_syscall_entry+0xb4/0x110
[<ffffffff810102bc>] ? do_audit_syscall_entry+0x6c/0x70
[<ffffffff811e0f11>] SyS_ioctl+0x81/0xa0
[<ffffffff816ba1d2>] system_call_fastpath+0x12/0x17
Additional routines that generate this BUG are rtw_joinbss_cmd(),
rtw_dynamic_chk_wk_cmd(), rtw_lps_ctrl_wk_cmd(), rtw_rpt_timer_cfg_cmd(),
rtw_ps_cmd(), report_survey_event(), report_join_res(), survey_timer_hdl(),
and rtw_check_bcn_info().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: navin patidar <navin.patidar@gmail.com>
---
drivers/staging/rtl8188eu/core/rtw_cmd.c | 22 +++++++++++-----------
drivers/staging/rtl8188eu/core/rtw_mlme_ext.c | 12 ++++++------
drivers/staging/rtl8188eu/core/rtw_wlan_util.c | 2 +-
3 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/staging/rtl8188eu/core/rtw_cmd.c b/drivers/staging/rtl8188eu/core/rtw_cmd.c
index a1cc788..4b43462 100644
--- a/drivers/staging/rtl8188eu/core/rtw_cmd.c
+++ b/drivers/staging/rtl8188eu/core/rtw_cmd.c
@@ -275,11 +275,11 @@ u8 rtw_sitesurvey_cmd(struct adapter *padapter, struct ndis_802_11_ssid *ssid,
if (check_fwstate(pmlmepriv, _FW_LINKED) == true)
rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_SCAN, 1);
- ph2c = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
+ ph2c = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC);
if (ph2c == NULL)
return _FAIL;
- psurveyPara = kzalloc(sizeof(struct sitesurvey_parm), GFP_KERNEL);
+ psurveyPara = kzalloc(sizeof(struct sitesurvey_parm), GFP_ATOMIC);
if (psurveyPara == NULL) {
kfree(ph2c);
return _FAIL;
@@ -405,7 +405,7 @@ u8 rtw_joinbss_cmd(struct adapter *padapter, struct wlan_network *pnetwork)
else
RT_TRACE(_module_rtl871x_cmd_c_, _drv_notice_, ("+Join cmd: SSid =[%s]\n", pmlmepriv->assoc_ssid.Ssid));
- pcmd = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
+ pcmd = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC);
if (pcmd == NULL) {
res = _FAIL;
RT_TRACE(_module_rtl871x_cmd_c_, _drv_err_, ("rtw_joinbss_cmd: memory allocate for cmd_obj fail!!!\n"));
@@ -754,13 +754,13 @@ u8 rtw_dynamic_chk_wk_cmd(struct adapter *padapter)
u8 res = _SUCCESS;
- ph2c = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
+ ph2c = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC);
if (ph2c == NULL) {
res = _FAIL;
goto exit;
}
- pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_KERNEL);
+ pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_ATOMIC);
if (pdrvextra_cmd_parm == NULL) {
kfree(ph2c);
res = _FAIL;
@@ -966,13 +966,13 @@ u8 rtw_lps_ctrl_wk_cmd(struct adapter *padapter, u8 lps_ctrl_type, u8 enqueue)
u8 res = _SUCCESS;
if (enqueue) {
- ph2c = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
+ ph2c = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC);
if (ph2c == NULL) {
res = _FAIL;
goto exit;
}
- pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_KERNEL);
+ pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_ATOMIC);
if (pdrvextra_cmd_parm == NULL) {
kfree(ph2c);
res = _FAIL;
@@ -1009,13 +1009,13 @@ u8 rtw_rpt_timer_cfg_cmd(struct adapter *padapter, u16 min_time)
u8 res = _SUCCESS;
- ph2c = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
+ ph2c = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC);
if (ph2c == NULL) {
res = _FAIL;
goto exit;
}
- pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_KERNEL);
+ pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_ATOMIC);
if (pdrvextra_cmd_parm == NULL) {
kfree(ph2c);
res = _FAIL;
@@ -1087,13 +1087,13 @@ u8 rtw_ps_cmd(struct adapter *padapter)
u8 res = _SUCCESS;
- ppscmd = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
+ ppscmd = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC);
if (ppscmd == NULL) {
res = _FAIL;
goto exit;
}
- pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_KERNEL);
+ pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_ATOMIC);
if (pdrvextra_cmd_parm == NULL) {
kfree(ppscmd);
res = _FAIL;
diff --git a/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c b/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c
index 990c168..e4b7ee4 100644
--- a/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c
+++ b/drivers/staging/rtl8188eu/core/rtw_mlme_ext.c
@@ -4239,12 +4239,12 @@ void report_survey_event(struct adapter *padapter,
pcmdpriv = &padapter->cmdpriv;
- pcmd_obj = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
+ pcmd_obj = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC);
if (pcmd_obj == NULL)
return;
cmdsz = (sizeof(struct survey_event) + sizeof(struct C2HEvent_Header));
- pevtcmd = kzalloc(cmdsz, GFP_KERNEL);
+ pevtcmd = kzalloc(cmdsz, GFP_ATOMIC);
if (pevtcmd == NULL) {
kfree(pcmd_obj);
return;
@@ -4337,12 +4337,12 @@ void report_join_res(struct adapter *padapter, int res)
struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
struct cmd_priv *pcmdpriv = &padapter->cmdpriv;
- pcmd_obj = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
+ pcmd_obj = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC);
if (pcmd_obj == NULL)
return;
cmdsz = (sizeof(struct joinbss_event) + sizeof(struct C2HEvent_Header));
- pevtcmd = kzalloc(cmdsz, GFP_KERNEL);
+ pevtcmd = kzalloc(cmdsz, GFP_ATOMIC);
if (pevtcmd == NULL) {
kfree(pcmd_obj);
return;
@@ -4852,11 +4852,11 @@ void survey_timer_hdl(void *function_context)
pmlmeext->scan_abort = false;/* reset */
}
- ph2c = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
+ ph2c = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC);
if (ph2c == NULL)
goto exit_survey_timer_hdl;
- psurveyPara = kzalloc(sizeof(struct sitesurvey_parm), GFP_KERNEL);
+ psurveyPara = kzalloc(sizeof(struct sitesurvey_parm), GFP_ATOMIC);
if (psurveyPara == NULL) {
kfree(ph2c);
goto exit_survey_timer_hdl;
diff --git a/drivers/staging/rtl8188eu/core/rtw_wlan_util.c b/drivers/staging/rtl8188eu/core/rtw_wlan_util.c
index c495977..324c1a7 100644
--- a/drivers/staging/rtl8188eu/core/rtw_wlan_util.c
+++ b/drivers/staging/rtl8188eu/core/rtw_wlan_util.c
@@ -935,7 +935,7 @@ int rtw_check_bcn_info(struct adapter *Adapter, u8 *pframe, u32 packet_len)
return true;
}
- bssid = kzalloc(sizeof(struct wlan_bssid_ex), GFP_KERNEL);
+ bssid = kzalloc(sizeof(struct wlan_bssid_ex), GFP_ATOMIC);
subtype = GetFrameSubType(pframe) >> 4;
--
2.1.2
^ permalink raw reply related
* Re: [PATCH net-next] sunvnet: fix NULL pointer dereference
From: Sowmini Varadhan @ 2014-11-12 16:12 UTC (permalink / raw)
To: David L Stevens; +Cc: David Miller, netdev
In-Reply-To: <546383B7.2090106@oracle.com>
On (11/12/14 10:58), David L Stevens wrote:
> --- a/drivers/net/ethernet/sun/sunvnet.c
> +++ b/drivers/net/ethernet/sun/sunvnet.c
> @@ -958,6 +958,8 @@ vnet_select_queue(struct net_device *dev, struct sk_buff *skb,
> struct vnet *vp = netdev_priv(dev);
> struct vnet_port *port = __tx_port_find(vp, skb);
>
> + if (port == NULL)
> + return 0;
> return port->q_index;
> }
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Thanks!
Sowmini
^ permalink raw reply
* [PATCH net-next] amd-xgbe: Fix sparse endian warnings
From: Tom Lendacky @ 2014-11-12 16:37 UTC (permalink / raw)
To: netdev; +Cc: davem, dan.carpenter
Change the types of the descriptor entries in the xgbe_ring_desc struct
from u32 to __le32 to fix endian warnings issued by sparse.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
---
drivers/net/ethernet/amd/xgbe/xgbe.h | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe.h b/drivers/net/ethernet/amd/xgbe/xgbe.h
index aa8da9f..901fb1f 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe.h
@@ -246,10 +246,10 @@ struct xgbe_packet_data {
/* Common Rx and Tx descriptor mapping */
struct xgbe_ring_desc {
- u32 desc0;
- u32 desc1;
- u32 desc2;
- u32 desc3;
+ __le32 desc0;
+ __le32 desc1;
+ __le32 desc2;
+ __le32 desc3;
};
/* Page allocation related values */
^ permalink raw reply related
* Re: [PATCH net-next 1/1] ipvlan: Initial check-in of the IPVLAN driver.
From: Pavel Emelyanov @ 2014-11-12 16:11 UTC (permalink / raw)
To: Mahesh Bandewar, netdev
Cc: Eric Dumazet, Maciej Zenczykowski, Laurent Chavey, Tim Hockin,
David Miller, Brandon Philips
In-Reply-To: <1415744984-25802-1-git-send-email-maheshb@google.com>
On 11/12/2014 02:29 AM, Mahesh Bandewar wrote:
> This driver is very similar to the macvlan driver except that it
> uses L3 on the frame to determine the logical interface while
> functioning as packet dispatcher. It inherits L2 of the master
> device hence the packets on wire will have the same L2 for all
> the packets originating from all virtual devices off of the same
> master device.
>
> This driver was developed keeping the namespace use-case in
> mind. Hence most of the examples given here take that as the
> base setup where main-device belongs to the default-ns and
> virtual devices are assigned to the additional namespaces.
>
> The device operates in two different modes and the difference
> in these two modes in primarily in the TX side.
>
> (a) L2 mode : In this mode, the device behaves as a L2 device.
> TX processing upto L2 happens on the stack of the virtual device
> associated with (namespace). Packets are switched after that
> into the main device (default-ns) and queued for xmit.
>
> RX processing is simple and all multicast, broadcast (if
> applicable), and unicast belonging to the address(es) are
> delivered to the virtual devices.
>
> (b) L3 mode : In this mode, the device behaves like a L3 device.
> TX processing upto L3 happens on the stack of the virtual device
> associated with (namespace). Packets are switched to the
> main-device (default-ns) for the L2 processing. Hence the routing
> table of the default-ns will be used in this mode.
>
> RX processins is somewhat similar to the L2 mode except that in
> this mode only Unicast packets are delivered to the virtual device
> while main-dev will handle all other packets.
>
> The devices can be added using the "ip" command from the iproute2
> package -
>
> ip link add link <master> <virtual> type ipvlan mode [ l2 | l3 ]
>
> Signed-off-by: Mahesh Bandewar <maheshb@google.com>
> Cc: Eric Dumazet <edumazet@google.com>
> Cc: Maciej Żenczykowski <maze@google.com>
> Cc: Laurent Chavey <chavey@google.com>
> Cc: Tim Hockin <thockin@google.com>
> Cc: Brandon Philips <brandon.philips@coreos.com>
> Cc: Pavel Emelianov <xemul@parallels.com>
Acked-by: /me on the general idea. We use this device of type in Parallels
heavily for several reasons -- not to generate too many MAC-s from one host
and to "enforce" the IP address for a container. I have a comment about the
latter below.
> +static void *ipvlan_get_L3_hdr(struct sk_buff *skb, int *type)
> +{
> + void *lyr3h = NULL;
> +
> + switch (skb->protocol) {
> + case htons(ETH_P_ARP): {
> + struct arphdr *arph;
> +
> + if (unlikely(!pskb_may_pull(skb, sizeof(struct arphdr))))
> + return NULL;
> +
> + arph = arp_hdr(skb);
> + *type = IPVL_ARP;
> + lyr3h = arph;
> + break;
> + }
> +
> + case htons(ETH_P_IP): {
> + u32 pktlen;
> + struct iphdr *ip4h;
> +
> + if (unlikely(!pskb_may_pull(skb, sizeof(struct iphdr))))
> + return NULL;
> +
> + ip4h = ip_hdr(skb);
> + pktlen = ntohs(ip4h->tot_len);
> + if (ip4h->ihl < 5 || ip4h->version != 4)
> + return NULL;
> + if (skb->len < pktlen || pktlen < (ip4h->ihl * 4))
> + return NULL;
> +
> + *type = IPVL_IPV4;
> + lyr3h = ip4h;
> + break;
> + }
> + case htons(ETH_P_IPV6): {
> + struct ipv6hdr *ip6h;
> +
> + if (unlikely(!pskb_may_pull(skb, sizeof(struct iphdr))))
Misprint -- should be sizeof(struct ipv6hdr)
> +static int ipvlan_link_new(struct net *src_net, struct net_device *dev,
> + struct nlattr *tb[], struct nlattr *data[])
> +{
> + struct ipvl_dev *ipvlan = netdev_priv(dev);
> + struct ipvl_port *port;
> + struct net_device *phy_dev;
> + int err;
> +
> + ipvlan_dbg(3, "%s[%d]: Entering...\n", __func__, __LINE__);
> + if (!tb[IFLA_LINK]) {
> + ipvlan_dbg(3, "%s[%d]: Returning -EINVAL...\n",
> + __func__, __LINE__);
> + return -EINVAL;
> + }
> +
> + phy_dev = __dev_get_by_index(src_net, nla_get_u32(tb[IFLA_LINK]));
> + if (phy_dev == NULL) {
> + ipvlan_dbg(3, "%s[%d]: Returning -ENODEV...\n",
> + __func__, __LINE__);
> + return -ENODEV;
> + }
> +
> + /* TODO will someone try creating ipvlan-dev on an ipvlan-virtual dev?*/
> + if (!ipvlan_dev_master(phy_dev)) {
> + err = ipvlan_port_create(phy_dev);
> + if (err < 0) {
> + ipvlan_dbg(3, "%s[%d]: Returning error (%d)...\n",
> + __func__, __LINE__, err);
> + return err;
> + }
> + }
> +
> + port = ipvlan_port_get_rtnl(phy_dev);
> + /* Get the mode if specified. */
> + if (data && data[IFLA_IPVLAN_MODE])
> + port->mode = nla_get_u16(data[IFLA_IPVLAN_MODE]);
Should the invalid value be checked here? There are places
where we BUG() in mode being "unknown".
> +
> + ipvlan->phy_dev = phy_dev;
> + ipvlan->dev = dev;
> + ipvlan->port = port;
> + ipvlan->sfeatures = IPVLAN_FEATURES;
> + INIT_LIST_HEAD(&ipvlan->addrs);
> + ipvlan->ipv4cnt = 0;
> + ipvlan->ipv6cnt = 0;
> +static int ipvlan_device_event(struct notifier_block *unused,
> + unsigned long event, void *ptr)
> +{
> + struct net_device *dev = netdev_notifier_info_to_dev(ptr);
> + struct ipvl_dev *ipvlan, *next;
> + struct ipvl_port *port;
> + LIST_HEAD(lst_kill);
> +
> + if (!ipvlan_dev_master(dev))
> + return NOTIFY_DONE;
> +
> + port = ipvlan_port_get_rtnl(dev);
> +
> + switch (event) {
> + case NETDEV_CHANGE:
> + list_for_each_entry(ipvlan, &port->ipvlans, pnode)
> + netif_stacked_transfer_operstate(ipvlan->phy_dev,
> + ipvlan->dev);
> + break;
> +
> + case NETDEV_UNREGISTER:
> + if (dev->reg_state != NETREG_UNREGISTERING)
> + break;
> +
> + list_for_each_entry_safe(ipvlan, next, &port->ipvlans,
> + pnode)
> + ipvlan->dev->rtnl_link_ops->dellink(ipvlan->dev,
> + &lst_kill);
> + unregister_netdevice_many(&lst_kill);
> + list_del(&lst_kill);
This list_del seems to be excessive.
> + break;
> +
> +static int ipvlan_addr4_event(struct notifier_block *unused,
> + unsigned long event, void *ptr)
> +{
> + struct in_ifaddr *if4 = (struct in_ifaddr *)ptr;
> + struct net_device *dev = (struct net_device *)if4->ifa_dev->dev;
> + struct ipvl_dev *ipvlan = netdev_priv(dev);
> + struct in_addr ip4_addr;
> +
> + ipvlan_dbg(3, "%s[%d]: Entering...\n", __func__, __LINE__);
> + if (!ipvlan_dev_slave(dev))
> + return NOTIFY_DONE;
> +
> + if (!ipvlan || !ipvlan->port)
> + return NOTIFY_DONE;
> +
> + switch (event) {
> + case NETDEV_UP:
Can it be (in the future) somehow restricted so that net-namespace wouldn't
be able to assign arbitrary IP address here? One of the reasons for using
such devices is to enforce the container to use the IP address given from
the host.
> + ip4_addr.s_addr = if4->ifa_address;
> + if (ipvlan_add_addr4(ipvlan, &ip4_addr))
> + return NOTIFY_BAD;
> + break;
> +
> + case NETDEV_DOWN:
> + ip4_addr.s_addr = if4->ifa_address;
> + ipvlan_del_addr4(ipvlan, &ip4_addr);
> + break;
> + }
> +
> + ipvlan_dbg(3, "%s[%d]: Leaving...\n", __func__, __LINE__);
> + return NOTIFY_OK;
> +}
^ permalink raw reply
* /proc/net/sockstat invalid memory accounting or memory leak in latest kernels? (trying to debug)
From: Denys Fedoryshchenko @ 2014-11-12 17:07 UTC (permalink / raw)
To: Eric Dumazet; +Cc: netdev
In-Reply-To: <8f138d88e3b850130eb9bb15e3e27069@visp.net.lb>
Hi
I've been able to trace invalid memory shown for sk_forward_alloc. Not
sure if it is related to bug when all tcp stack are wrecked on highload
servers (i had even such crash on server with plain torrents, not that
much of them).
First they were appearing in ss output as f4294966016, but in tc it
shows as unsigned integer, while in kernel it is signed integer. Should
i provide patch for iproute2?
After changing value to correct one, here is what is got:
skmem:(r0,rb359040,t0,tb46080,f-1280,w1280,o0,bl0)
skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
skmem:(r0,rb357120,t0,tb46080,f-1280,w1280,o0,bl0)
skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
skmem:(r0,rb357120,t0,tb46080,f-1280,w1280,o0,bl0)
skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
skmem:(r0,rb357120,t0,tb46080,f-1280,w1280,o0,bl0)
skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
skmem:(r0,rb357120,t0,tb46080,f-1280,w1280,o0,bl0)
skmem:(r0,rb357120,t0,tb46080,f-1280,w1280,o0,bl0)
skmem:(r0,rb357120,t0,tb46080,f-1280,w1280,o0,bl0)
skmem:(r0,rb357120,t0,tb46080,f-1280,w1280,o0,bl0)
skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
skmem:(r0,rb357120,t0,tb46080,f-1280,w1280,o0,bl0)
So as it is signed integer, it is actually appears a lot as -1280 bytes.
After placing several WARN_ON_ONCE on fall functions involving
sk_forward_alloc, where negative value may
appear i traced down at least to tcp_connect_queue_skb().
[ 13.094561] WARNING: CPU: 4 PID: 2855 at include/net/sock.h:1476
tcp_connect_queue_skb+0x9f/0xd0()
After adding some debug values, it was confirmed:
skb_header_release(skb);
__tcp_add_write_queue_tail(sk, skb);
sk->sk_wmem_queued += skb->truesize;
sk_mem_charge(sk, skb->truesize); <<<< sk->sk_forward_alloc often is 0,
and skb->truesize is 1280, so -1280 is result
tp->write_seq = tcb->end_seq;
tp->packets_out += tcp_skb_pcount(skb);
Maybe it should not be subtracted here? Or maybe logic are inverted all
over the code?
Please help :)
^ permalink raw reply
* Re: /proc/net/sockstat invalid memory accounting or memory leak in latest kernels? (trying to debug)
From: Eric Dumazet @ 2014-11-12 17:27 UTC (permalink / raw)
To: Denys Fedoryshchenko, Neal Cardwell, Yuchung Cheng; +Cc: netdev
In-Reply-To: <2adbf5346b4dd2bebe1915096c1c567c@visp.net.lb>
On Wed, 2014-11-12 at 19:07 +0200, Denys Fedoryshchenko wrote:
> Hi
>
>
> I've been able to trace invalid memory shown for sk_forward_alloc. Not
> sure if it is related to bug when all tcp stack are wrecked on highload
> servers (i had even such crash on server with plain torrents, not that
> much of them).
> First they were appearing in ss output as f4294966016, but in tc it
> shows as unsigned integer, while in kernel it is signed integer. Should
> i provide patch for iproute2?
> After changing value to correct one, here is what is got:
> skmem:(r0,rb359040,t0,tb46080,f-1280,w1280,o0,bl0)
> skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
> skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
> skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
> skmem:(r0,rb357120,t0,tb46080,f-1280,w1280,o0,bl0)
> skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
> skmem:(r0,rb357120,t0,tb46080,f-1280,w1280,o0,bl0)
> skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
> skmem:(r0,rb357120,t0,tb46080,f-1280,w1280,o0,bl0)
> skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
> skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
> skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
> skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
> skmem:(r0,rb357120,t0,tb46080,f-1280,w1280,o0,bl0)
> skmem:(r0,rb357120,t0,tb46080,f-1280,w1280,o0,bl0)
> skmem:(r0,rb357120,t0,tb46080,f-1280,w1280,o0,bl0)
> skmem:(r0,rb357120,t0,tb46080,f-1280,w1280,o0,bl0)
> skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
> skmem:(r0,rb349440,t0,tb46080,f-1280,w1280,o0,bl0)
> skmem:(r0,rb357120,t0,tb46080,f-1280,w1280,o0,bl0)
>
> So as it is signed integer, it is actually appears a lot as -1280 bytes.
> After placing several WARN_ON_ONCE on fall functions involving
> sk_forward_alloc, where negative value may
> appear i traced down at least to tcp_connect_queue_skb().
> [ 13.094561] WARNING: CPU: 4 PID: 2855 at include/net/sock.h:1476
> tcp_connect_queue_skb+0x9f/0xd0()
> After adding some debug values, it was confirmed:
>
>
> skb_header_release(skb);
> __tcp_add_write_queue_tail(sk, skb);
> sk->sk_wmem_queued += skb->truesize;
> sk_mem_charge(sk, skb->truesize); <<<< sk->sk_forward_alloc often is 0,
> and skb->truesize is 1280, so -1280 is result
> tp->write_seq = tcb->end_seq;
> tp->packets_out += tcp_skb_pcount(skb);
>
> Maybe it should not be subtracted here? Or maybe logic are inverted all
> over the code?
> Please help :)
>
Thanks a lot for the report, I am CCing other experts ;)
AFAIK, a negative forward alloc should not be a problem, a long as the
incursion is bound.
^ permalink raw reply
* Re: "asix: Don't reset PHY on if_up for ASIX 88772" breaks net on arndale platform
From: David Miller @ 2014-11-12 17:43 UTC (permalink / raw)
To: M.Stam
Cc: ben, ckeepax, riku.voipio, linux-usb, netdev, linux-kernel,
linux-samsung-soc
In-Reply-To: <C89EFD3CD56F64468D3D206D683A8D2203A003FE@ldam-msx2.fugro-nl.local>
Please do not top-post.
^ permalink raw reply
* Re: [PATCH v1 net-next 1/2] bonding: Expand speed type bits of the AD Port Key
From: David Miller @ 2014-11-12 17:43 UTC (permalink / raw)
To: jianhua.xie; +Cc: jay.vosburgh, netdev, vfalico, andy
In-Reply-To: <54632E25.3000205@freescale.com>
Please do not top-post.
^ permalink raw reply
* Re: [PATCH net-next] sunvnet: fix NULL pointer dereference
From: David Miller @ 2014-11-12 18:51 UTC (permalink / raw)
To: david.stevens; +Cc: netdev, sowmini.varadhan
In-Reply-To: <546383B7.2090106@oracle.com>
From: David L Stevens <david.stevens@oracle.com>
Date: Wed, 12 Nov 2014 10:58:47 -0500
> This patch fixes a NULL pointer dereference when __tx_port_find() doesn't
> find a matching port.
>
> Signed-off-by: David L Stevens <david.stevens@oracle.com>
Applied, thanks.
^ permalink raw reply
* Re: [PATCH 0/3] net: phy: add module_phy_driver macro
From: David Miller @ 2014-11-12 18:53 UTC (permalink / raw)
To: f.fainelli; +Cc: johan, linux-kernel, netdev
In-Reply-To: <54626015.3030907@gmail.com>
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue, 11 Nov 2014 11:14:29 -0800
> On 11/11/2014 10:45 AM, Johan Hovold wrote:
>> Add module_phy_driver macro that can be used by PHY drivers that only
>> calls phy_driver_register or phy_drivers_register (and the corresponding
>> unregister functions) in their module init (and exit).
>>
>> This allows us to eliminate a lot of boilerplate code.
>>
>> Split in three patches (actual macro and two driver change classes) in
>> order to facilitate review.
>
> Looks good to me:
>
> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Series applied, thanks.
^ permalink raw reply
* Re: [PATCH 0/9] net: phy: micrel: refactoring and KSZ8081/KSZ8091 features
From: David Miller @ 2014-11-12 18:56 UTC (permalink / raw)
To: johan; +Cc: f.fainelli, linux-kernel, netdev
In-Reply-To: <1415732415-10363-1-git-send-email-johan@kernel.org>
From: Johan Hovold <johan@kernel.org>
Date: Tue, 11 Nov 2014 20:00:06 +0100
> This series cleans up and refactors parts of the micrel PHY driver, and
> adds support for broadcast-address-disable and led-mode configuration
> for KSZ8081 and KSZ8091 PHYs.
>
> Specifically, this enables dual KSZ8081 setups (which are limited to
> using address 0 and 3).
>
> A follow up series will add device-type abstraction which will allow for
> further refactoring and shared initialisation code.
Series applied, thanks Johan.
^ permalink raw reply
* Re: [PATCH] irda: Convert IRDA_DEBUG to pr_debug
From: David Miller @ 2014-11-12 18:57 UTC (permalink / raw)
To: joe; +Cc: samuel, netdev
In-Reply-To: <1415745897.16070.15.camel@perches.com>
From: Joe Perches <joe@perches.com>
Date: Tue, 11 Nov 2014 14:44:57 -0800
> Use the normal kernel debugging mechanism which also
> enables dynamic_debug at the same time.
>
> Other miscellanea:
>
> o Remove sysctl for irda_debug
> o Remove function tracing like uses (use ftrace instead)
> o Coalesce formats
> o Realign arguments
> o Remove unnecessary OOM messages
>
> Signed-off-by: Joe Perches <joe@perches.com>
> ---
>
> donauboe does not have normal indentation, unchanged.
Applied to net-next, thanks Joe.
^ permalink raw reply
* Re: [PATCH net-next 0/5] net: phy: bcm7xxx: workaround updates
From: David Miller @ 2014-11-12 19:08 UTC (permalink / raw)
To: f.fainelli; +Cc: netdev
In-Reply-To: <1415746514-11189-1-git-send-email-f.fainelli@gmail.com>
From: Florian Fainelli <f.fainelli@gmail.com>
Date: Tue, 11 Nov 2014 14:55:09 -0800
> This patch series contains some updates to the Broadcom BCM7xxx internal
> PHY driver, including:
>
> - removing an annonying print that would appear during interface up/down and
> suspend/resume cycles
> - drop a workaround sequence for a non-production PHY revision
> - add new workarounds for the latest and greatest PHY devices found out ther
Applied, thanks Florian.
^ permalink raw reply
* Re: [patch net-next 1/2] net: move vlan pop/push functions into common code
From: David Miller @ 2014-11-12 19:11 UTC (permalink / raw)
To: jiri
Cc: pshelar, netdev, jhs, therbert, edumazet, willemb, dborkman, mst,
fw, Paul.Durrant, tgraf
In-Reply-To: <20141112115933.GD1882@nanopsycho.orion>
From: Jiri Pirko <jiri@resnulli.us>
Date: Wed, 12 Nov 2014 12:59:33 +0100
> That is not directly related to this patchset. I believe that should be
> changed in separate patch later on.
+1, but this has been a long standing issue and a large source of bugs.
^ permalink raw reply
* Re: [patch net-next v2 1/4] openvswitch: actions: use skb_postpull_rcsum when possible
From: Pravin Shelar @ 2014-11-12 19:13 UTC (permalink / raw)
To: Jiri Pirko
Cc: netdev, David Miller, Jamal Hadi Salim, Tom Herbert, Eric Dumazet,
Willem de Bruijn, Daniel Borkmann, mst, fw, Paul.Durrant,
Thomas Graf
In-Reply-To: <1415803950-9838-1-git-send-email-jiri@resnulli.us>
On Wed, Nov 12, 2014 at 6:52 AM, Jiri Pirko <jiri@resnulli.us> wrote:
> Replace duplicated code by calling skb_postpull_rcsum
>
> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
> Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Looks good.
Acked-by: Pravin B Shelar <pshelar@nicira.com>
> ---
> net/openvswitch/actions.c | 9 ++-------
> 1 file changed, 2 insertions(+), 7 deletions(-)
>
> diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c
> index 394efa6..749a301 100644
> --- a/net/openvswitch/actions.c
> +++ b/net/openvswitch/actions.c
> @@ -175,10 +175,7 @@ static int pop_mpls(struct sk_buff *skb, struct sw_flow_key *key,
> if (unlikely(err))
> return err;
>
> - if (skb->ip_summed == CHECKSUM_COMPLETE)
> - skb->csum = csum_sub(skb->csum,
> - csum_partial(skb_mpls_header(skb),
> - MPLS_HLEN, 0));
> + skb_postpull_rcsum(skb, skb_mpls_header(skb), MPLS_HLEN);
>
> memmove(skb_mac_header(skb) + MPLS_HLEN, skb_mac_header(skb),
> skb->mac_len);
> @@ -230,9 +227,7 @@ static int __pop_vlan_tci(struct sk_buff *skb, __be16 *current_tci)
> if (unlikely(err))
> return err;
>
> - if (skb->ip_summed == CHECKSUM_COMPLETE)
> - skb->csum = csum_sub(skb->csum, csum_partial(skb->data
> - + (2 * ETH_ALEN), VLAN_HLEN, 0));
> + skb_postpull_rcsum(skb, skb->data + (2 * ETH_ALEN), VLAN_HLEN);
>
> vhdr = (struct vlan_hdr *)(skb->data + ETH_HLEN);
> *current_tci = vhdr->h_vlan_TCI;
> --
> 1.9.3
>
^ permalink raw reply
* Re: [patch net-next v2 2/4] net: move make_writable helper into common code
From: Pravin Shelar @ 2014-11-12 19:15 UTC (permalink / raw)
To: Jiri Pirko
Cc: netdev, David Miller, Jamal Hadi Salim, Tom Herbert, Eric Dumazet,
Willem de Bruijn, Daniel Borkmann, mst, fw, Paul.Durrant,
Thomas Graf
In-Reply-To: <1415803950-9838-2-git-send-email-jiri@resnulli.us>
On Wed, Nov 12, 2014 at 6:52 AM, Jiri Pirko <jiri@resnulli.us> wrote:
> note that skb_make_writable already exists in net/netfilter/core.c
> but does something slightly different.
>
> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
> Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Looks good.
Acked-by: Pravin B Shelar <pshelar@nicira.com>
> ---
> include/linux/skbuff.h | 1 +
> net/core/skbuff.c | 12 ++++++++++++
> net/openvswitch/actions.c | 39 ++++++++++++++-------------------------
> 3 files changed, 27 insertions(+), 25 deletions(-)
>
> diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
> index 73c370e..e045516 100644
> --- a/include/linux/skbuff.h
> +++ b/include/linux/skbuff.h
> @@ -2678,6 +2678,7 @@ void skb_scrub_packet(struct sk_buff *skb, bool xnet);
> unsigned int skb_gso_transport_seglen(const struct sk_buff *skb);
> struct sk_buff *skb_segment(struct sk_buff *skb, netdev_features_t features);
> struct sk_buff *skb_vlan_untag(struct sk_buff *skb);
> +int skb_ensure_writable(struct sk_buff *skb, int write_len);
>
> struct skb_checksum_ops {
> __wsum (*update)(const void *mem, int len, __wsum wsum);
> diff --git a/net/core/skbuff.c b/net/core/skbuff.c
> index 7001896..d11bbe0 100644
> --- a/net/core/skbuff.c
> +++ b/net/core/skbuff.c
> @@ -4151,6 +4151,18 @@ err_free:
> }
> EXPORT_SYMBOL(skb_vlan_untag);
>
> +int skb_ensure_writable(struct sk_buff *skb, int write_len)
> +{
> + if (!pskb_may_pull(skb, write_len))
> + return -ENOMEM;
> +
> + if (!skb_cloned(skb) || skb_clone_writable(skb, write_len))
> + return 0;
> +
> + return pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
> +}
> +EXPORT_SYMBOL(skb_ensure_writable);
> +
> /**
> * alloc_skb_with_frags - allocate skb with page frags
> *
> diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c
> index 749a301..04c9680 100644
> --- a/net/openvswitch/actions.c
> +++ b/net/openvswitch/actions.c
> @@ -119,17 +119,6 @@ static bool is_flow_key_valid(const struct sw_flow_key *key)
> return !!key->eth.type;
> }
>
> -static int make_writable(struct sk_buff *skb, int write_len)
> -{
> - if (!pskb_may_pull(skb, write_len))
> - return -ENOMEM;
> -
> - if (!skb_cloned(skb) || skb_clone_writable(skb, write_len))
> - return 0;
> -
> - return pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
> -}
> -
> static int push_mpls(struct sk_buff *skb, struct sw_flow_key *key,
> const struct ovs_action_push_mpls *mpls)
> {
> @@ -171,7 +160,7 @@ static int pop_mpls(struct sk_buff *skb, struct sw_flow_key *key,
> struct ethhdr *hdr;
> int err;
>
> - err = make_writable(skb, skb->mac_len + MPLS_HLEN);
> + err = skb_ensure_writable(skb, skb->mac_len + MPLS_HLEN);
> if (unlikely(err))
> return err;
>
> @@ -201,7 +190,7 @@ static int set_mpls(struct sk_buff *skb, struct sw_flow_key *key,
> __be32 *stack;
> int err;
>
> - err = make_writable(skb, skb->mac_len + MPLS_HLEN);
> + err = skb_ensure_writable(skb, skb->mac_len + MPLS_HLEN);
> if (unlikely(err))
> return err;
>
> @@ -223,7 +212,7 @@ static int __pop_vlan_tci(struct sk_buff *skb, __be16 *current_tci)
> struct vlan_hdr *vhdr;
> int err;
>
> - err = make_writable(skb, VLAN_ETH_HLEN);
> + err = skb_ensure_writable(skb, VLAN_ETH_HLEN);
> if (unlikely(err))
> return err;
>
> @@ -308,7 +297,7 @@ static int set_eth_addr(struct sk_buff *skb, struct sw_flow_key *key,
> const struct ovs_key_ethernet *eth_key)
> {
> int err;
> - err = make_writable(skb, ETH_HLEN);
> + err = skb_ensure_writable(skb, ETH_HLEN);
> if (unlikely(err))
> return err;
>
> @@ -410,8 +399,8 @@ static int set_ipv4(struct sk_buff *skb, struct sw_flow_key *key,
> struct iphdr *nh;
> int err;
>
> - err = make_writable(skb, skb_network_offset(skb) +
> - sizeof(struct iphdr));
> + err = skb_ensure_writable(skb, skb_network_offset(skb) +
> + sizeof(struct iphdr));
> if (unlikely(err))
> return err;
>
> @@ -448,8 +437,8 @@ static int set_ipv6(struct sk_buff *skb, struct sw_flow_key *key,
> __be32 *saddr;
> __be32 *daddr;
>
> - err = make_writable(skb, skb_network_offset(skb) +
> - sizeof(struct ipv6hdr));
> + err = skb_ensure_writable(skb, skb_network_offset(skb) +
> + sizeof(struct ipv6hdr));
> if (unlikely(err))
> return err;
>
> @@ -491,7 +480,7 @@ static int set_ipv6(struct sk_buff *skb, struct sw_flow_key *key,
> return 0;
> }
>
> -/* Must follow make_writable() since that can move the skb data. */
> +/* Must follow skb_ensure_writable() since that can move the skb data. */
> static void set_tp_port(struct sk_buff *skb, __be16 *port,
> __be16 new_port, __sum16 *check)
> {
> @@ -521,8 +510,8 @@ static int set_udp(struct sk_buff *skb, struct sw_flow_key *key,
> struct udphdr *uh;
> int err;
>
> - err = make_writable(skb, skb_transport_offset(skb) +
> - sizeof(struct udphdr));
> + err = skb_ensure_writable(skb, skb_transport_offset(skb) +
> + sizeof(struct udphdr));
> if (unlikely(err))
> return err;
>
> @@ -546,8 +535,8 @@ static int set_tcp(struct sk_buff *skb, struct sw_flow_key *key,
> struct tcphdr *th;
> int err;
>
> - err = make_writable(skb, skb_transport_offset(skb) +
> - sizeof(struct tcphdr));
> + err = skb_ensure_writable(skb, skb_transport_offset(skb) +
> + sizeof(struct tcphdr));
> if (unlikely(err))
> return err;
>
> @@ -572,7 +561,7 @@ static int set_sctp(struct sk_buff *skb, struct sw_flow_key *key,
> int err;
> unsigned int sctphoff = skb_transport_offset(skb);
>
> - err = make_writable(skb, sctphoff + sizeof(struct sctphdr));
> + err = skb_ensure_writable(skb, sctphoff + sizeof(struct sctphdr));
> if (unlikely(err))
> return err;
>
> --
> 1.9.3
>
^ permalink raw reply
* Re: [patch net-next v2 3/4] net: move vlan pop/push functions into common code
From: Pravin Shelar @ 2014-11-12 19:17 UTC (permalink / raw)
To: Jiri Pirko
Cc: netdev, David Miller, Jamal Hadi Salim, Tom Herbert, Eric Dumazet,
Willem de Bruijn, Daniel Borkmann, mst, fw, Paul.Durrant,
Thomas Graf
In-Reply-To: <1415803950-9838-3-git-send-email-jiri@resnulli.us>
On Wed, Nov 12, 2014 at 6:52 AM, Jiri Pirko <jiri@resnulli.us> wrote:
> So it can be used from out of openvswitch code.
> Did couple of cosmetic changes on the way, namely variable naming and
> adding support for 8021AD proto.
>
> Signed-off-by: Jiri Pirko <jiri@resnulli.us>
> ---
>
> v1->v2:
> - adjusted to fix recent ovs changes
> - included change to use make_writable suggested by Eric
>
> include/linux/skbuff.h | 2 ++
> net/core/skbuff.c | 78 +++++++++++++++++++++++++++++++++++++++++++++
> net/openvswitch/actions.c | 81 +++++------------------------------------------
> 3 files changed, 88 insertions(+), 73 deletions(-)
>
> diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
> index e045516..78c299f 100644
> --- a/include/linux/skbuff.h
> +++ b/include/linux/skbuff.h
> @@ -2679,6 +2679,8 @@ unsigned int skb_gso_transport_seglen(const struct sk_buff *skb);
> struct sk_buff *skb_segment(struct sk_buff *skb, netdev_features_t features);
> struct sk_buff *skb_vlan_untag(struct sk_buff *skb);
> int skb_ensure_writable(struct sk_buff *skb, int write_len);
> +int skb_vlan_pop(struct sk_buff *skb);
> +int skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci);
>
> struct skb_checksum_ops {
> __wsum (*update)(const void *mem, int len, __wsum wsum);
> diff --git a/net/core/skbuff.c b/net/core/skbuff.c
> index d11bbe0..c7d3000 100644
> --- a/net/core/skbuff.c
> +++ b/net/core/skbuff.c
> @@ -4163,6 +4163,84 @@ int skb_ensure_writable(struct sk_buff *skb, int write_len)
> }
> EXPORT_SYMBOL(skb_ensure_writable);
>
> +/* remove VLAN header from packet and update csum accordingly. */
> +static int __skb_vlan_pop(struct sk_buff *skb, u16 *vlan_tci)
> +{
> + struct vlan_hdr *vhdr;
> + int err;
> +
> + err = skb_ensure_writable(skb, VLAN_ETH_HLEN);
> + if (unlikely(err))
> + return err;
> +
> + skb_postpull_rcsum(skb, skb->data + (2 * ETH_ALEN), VLAN_HLEN);
> +
> + vhdr = (struct vlan_hdr *)(skb->data + ETH_HLEN);
> + *vlan_tci = ntohs(vhdr->h_vlan_TCI);
> +
> + memmove(skb->data + VLAN_HLEN, skb->data, 2 * ETH_ALEN);
> + __skb_pull(skb, VLAN_HLEN);
> +
> + vlan_set_encap_proto(skb, vhdr);
> + skb->mac_header += VLAN_HLEN;
> + if (skb_network_offset(skb) < ETH_HLEN)
> + skb_set_network_header(skb, ETH_HLEN);
> + skb_reset_mac_len(skb);
> +
> + return 0;
> +}
> +
> +int skb_vlan_pop(struct sk_buff *skb)
> +{
> + u16 vlan_tci;
> + __be16 vlan_proto;
> + int err;
> +
> + if (likely(vlan_tx_tag_present(skb))) {
> + skb->vlan_tci = 0;
> + } else {
> + if (unlikely((skb->protocol != htons(ETH_P_8021Q) &&
> + skb->protocol != htons(ETH_P_8021AD)) ||
> + skb->len < VLAN_ETH_HLEN))
> + return 0;
> +
> + err = __skb_vlan_pop(skb, &vlan_tci);
> + if (err)
> + return err;
> + }
> + /* move next vlan tag to hw accel tag */
> + if (likely((skb->protocol != htons(ETH_P_8021Q) &&
> + skb->protocol != htons(ETH_P_8021AD)) ||
> + skb->len < VLAN_ETH_HLEN))
> + return 0;
> +
> + vlan_proto = skb->protocol;
> + err = __skb_vlan_pop(skb, &vlan_tci);
> + if (unlikely(err))
> + return err;
> +
> + __vlan_hwaccel_put_tag(skb, vlan_proto, vlan_tci);
> + return 0;
> +}
> +EXPORT_SYMBOL(skb_vlan_pop);
> +
> +int skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci)
> +{
> + if (vlan_tx_tag_present(skb)) {
> + /* push down current VLAN tag */
> + if (!__vlan_put_tag(skb, skb->vlan_proto,
> + vlan_tx_tag_get(skb)))
> + return -ENOMEM;
> +
> + if (skb->ip_summed == CHECKSUM_COMPLETE)
> + skb->csum = csum_add(skb->csum, csum_partial(skb->data
> + + (2 * ETH_ALEN), VLAN_HLEN, 0));
> + }
Needs to update skb->mac_len.
> + __vlan_hwaccel_put_tag(skb, vlan_proto, vlan_tci);
> + return 0;
> +}
> +EXPORT_SYMBOL(skb_vlan_push);
> +
> /**
> * alloc_skb_with_frags - allocate skb with page frags
> *
> diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c
> index 04c9680..e1a5182 100644
> --- a/net/openvswitch/actions.c
> +++ b/net/openvswitch/actions.c
> @@ -206,91 +206,26 @@ static int set_mpls(struct sk_buff *skb, struct sw_flow_key *key,
> return 0;
> }
>
> -/* remove VLAN header from packet and update csum accordingly. */
> -static int __pop_vlan_tci(struct sk_buff *skb, __be16 *current_tci)
> -{
> - struct vlan_hdr *vhdr;
> - int err;
> -
> - err = skb_ensure_writable(skb, VLAN_ETH_HLEN);
> - if (unlikely(err))
> - return err;
> -
> - skb_postpull_rcsum(skb, skb->data + (2 * ETH_ALEN), VLAN_HLEN);
> -
> - vhdr = (struct vlan_hdr *)(skb->data + ETH_HLEN);
> - *current_tci = vhdr->h_vlan_TCI;
> -
> - memmove(skb->data + VLAN_HLEN, skb->data, 2 * ETH_ALEN);
> - __skb_pull(skb, VLAN_HLEN);
> -
> - vlan_set_encap_proto(skb, vhdr);
> - skb->mac_header += VLAN_HLEN;
> -
> - if (skb_network_offset(skb) < ETH_HLEN)
> - skb_set_network_header(skb, ETH_HLEN);
> -
> - /* Update mac_len for subsequent MPLS actions */
> - skb_reset_mac_len(skb);
> - return 0;
> -}
> -
> static int pop_vlan(struct sk_buff *skb, struct sw_flow_key *key)
> {
> - __be16 tci;
> int err;
>
> - if (likely(vlan_tx_tag_present(skb))) {
> - skb->vlan_tci = 0;
> - } else {
> - if (unlikely(skb->protocol != htons(ETH_P_8021Q) ||
> - skb->len < VLAN_ETH_HLEN))
> - return 0;
> -
> - err = __pop_vlan_tci(skb, &tci);
> - if (err)
> - return err;
> - }
> - /* move next vlan tag to hw accel tag */
> - if (likely(skb->protocol != htons(ETH_P_8021Q) ||
> - skb->len < VLAN_ETH_HLEN)) {
> + err = skb_vlan_pop(skb);
> + if (vlan_tx_tag_present(skb))
> + invalidate_flow_key(key);
> + else
> key->eth.tci = 0;
> - return 0;
> - }
> -
> - invalidate_flow_key(key);
> - err = __pop_vlan_tci(skb, &tci);
> - if (unlikely(err))
> - return err;
> -
> - __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), ntohs(tci));
> - return 0;
> + return err;
> }
>
> static int push_vlan(struct sk_buff *skb, struct sw_flow_key *key,
> const struct ovs_action_push_vlan *vlan)
> {
> - if (unlikely(vlan_tx_tag_present(skb))) {
> - u16 current_tag;
> -
> - /* push down current VLAN tag */
> - current_tag = vlan_tx_tag_get(skb);
> -
> - if (!__vlan_put_tag(skb, skb->vlan_proto, current_tag))
> - return -ENOMEM;
> - /* Update mac_len for subsequent MPLS actions */
> - skb->mac_len += VLAN_HLEN;
> -
> - if (skb->ip_summed == CHECKSUM_COMPLETE)
> - skb->csum = csum_add(skb->csum, csum_partial(skb->data
> - + (2 * ETH_ALEN), VLAN_HLEN, 0));
> -
> + if (vlan_tx_tag_present(skb))
> invalidate_flow_key(key);
> - } else {
> + else
> key->eth.tci = vlan->vlan_tci;
> - }
> - __vlan_hwaccel_put_tag(skb, vlan->vlan_tpid, ntohs(vlan->vlan_tci) & ~VLAN_TAG_PRESENT);
> - return 0;
> + return skb_vlan_push(skb, vlan->vlan_tpid, ntohs(vlan->vlan_tci) & ~VLAN_TAG_PRESENT);
> }
>
> static int set_eth_addr(struct sk_buff *skb, struct sw_flow_key *key,
> --
> 1.9.3
>
^ permalink raw reply
* Re: Device Tree Binding for Marvell DSA Switch on imx28 board over Mdio Interface
From: Florian Fainelli @ 2014-11-12 19:19 UTC (permalink / raw)
To: Oliver Graute, netdev
In-Reply-To: <CA+KjHfYZdZ88ZFzFCPN-bGphh+mnSWy6i0WNzFYv=gOsafXA7g@mail.gmail.com>
On 11/12/2014 05:07 AM, Oliver Graute wrote:
> Hello,
>
> how do I specify the DSA node and the MDIO node in the Device Tree
> Binding to integrate a Marvell 88e6071 switch with a imx28 board?
If you do not CC the people actively working on this, chances are that
they will just miss your email.
>
> On my board the Marvell switch 88e6071 is connected via phy1 (on a
> imx28 PCB) to phy5 on the Marvell switch (on a Switch PCB). All phys
> are connected via the same MDIO Bus.
>
> I enabled the Marvell DSA Support Driver, Gianfar Ethernet Driver and
> Freescale PQ MDIO Driver in the Kernel (I' am not sure if this is the
> right choice for imx28 fec ethernet controller is it?)
>
> I already know that I need to adapt the DSA driver for this new
> switch. But currently I can't access the switch ports because my MDIO
> Bus is not configured correctly. It always ends with:
>
> dmesg | grep -E "mii|dsa|mdio"
> [ 2.528900] libphy: fec_enet_mii_bus: probed
> [ 3.028061] !!!!Enter dsa Probe!!!!!
> [ 3.037640] !!!!!Enter dsa_of_probe!!!!!
> [ 3.041736] !!!!before of_parse_phandle dsa,mii-bus!!!!!
> [ 3.047123] !!!! mdio->name=ethernet-phy !!!!!
> [ 3.051658] !!!!before of_mdio_find_bus!!!!!
> [ 3.055950] !!!!!enter of_mdio_find_bus!!!!!
> [ 3.074074] !!!!!enter of_mdio_bus_match!!!!!
> [ 3.078451] !!!!!enter of_mdio_bus_match!!!!!
> [ 3.088915] !!!!Leave of_mdio_find_bus !!!!!
> [ 3.093268] !!!! return of_mdio_find_bus =22 !!!!!
> [ 3.098166] dsa_of_probe returns=-22
> [ 3.101858] dsa: probe of dsa.5 failed with error -22
> [ 19.169423] fec 800f0000.ethernet eth0: Freescale FEC PHY driver
> [Micrel KSZ8041] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1)
> [ 20.038786] fec 800f4000.ethernet eth1: Freescale FEC PHY driver
> [Micrel KSZ8041] (mii_bus:phy_addr=800f0000.etherne:01, irq=-1)
>
> because the method of_mdio_find_bus returns with EINVAL
>
> I suspect that the problem is the fact that the Kernel is not getting
> connected to the MDIO bus.
> what is wrong here?
>
> dsa@0 {
> compatible = "marvell,dsa";
> #address-cells = <2>;
> #size-cells = <0>;
> interrupts = <10>;
> dsa,ethernet = <ð1>;
> dsa,mii-bus = <ðphy1>;
This should be phandle to the MDIO bus controller, not a node within
its, so in your case this should be dsa,mii-bus = <&mdio_bus>;
>
> switch@0 {
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <5 0>; /* MDIO address 5, switch 0 in tree */
>
> port@0 {
> reg = <0>;
> label = "lan1";
> phy-handle = <ðphy1>;
> };
>
> port@1 {
> reg = <1>;
> label = "lan2";
> };
>
> port@2 {
> reg = <2>;
> label = "lan3";
> };
>
> port@3 {
> reg = <3>;
> label = "lan4";
> };
>
> port@4 {
> reg = <4>;
> label = "lan5";
> };
>
> port@5 {
> reg = <5>;
> label = "cpu";
> };
>
> };
> };
>
>
> eth1: eth1 {
> status = "okay";
> ethernet1-port@1 {
> phy-handle = <ðphy1>;
You probably want to use a fixed-link node here to provide a link status
that is always UP as seen from the CPU Ethernet MAC perspective, so
something like this:
fixed-link {
speed = <1000>;
full-duplex;
};
> };
> };
>
>
> mdio_bus: mdio {
> #address-cells = <1>;
> #size-cells = <0>;
> device_type = "mdio";
> //compatible = "fsl,gianfar-mdio";
> compatible = "fsl,mpc875-fec-mdio", "fsl,pq1-fec-mdio";
> reg = <0xe00 0x188>;
> status = "okay";
>
> ethphy0: ethernet-phy@0 {
> reg = <0>;
>
> };
>
> ethphy1: ethernet-phy@1 {
> reg = <1>;
> };
> //reg = <0xff>; */ /* No PHY attached */
> //speed = <1000>;
> //duple = <1>;
> };
>
> Best regards,
>
> Oliver Graute
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox