* [PATCH net-next 1/4] qed: Add iWARP enablement support
From: Michal Kalderon @ 2017-09-19 17:26 UTC (permalink / raw)
To: davem, netdev; +Cc: linux-rdma, dledford, Michal Kalderon, Ariel Elior
In-Reply-To: <1505841979-26365-1-git-send-email-Michal.Kalderon@cavium.com>
This patch is the last of the initial iWARP patch series. It
adds the possiblity to actually detect iWARP from the device and enable
it in the critical locations which basically make iWARP available.
It wasn't submitted until now as iWARP hadn't been accepted into
the rdma tree.
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
---
drivers/net/ethernet/qlogic/qed/qed_cxt.c | 6 ++++++
drivers/net/ethernet/qlogic/qed/qed_mcp.c | 10 +++++-----
drivers/net/ethernet/qlogic/qed/qed_rdma.c | 5 ++++-
drivers/net/ethernet/qlogic/qed/qed_sp_commands.c | 1 +
4 files changed, 16 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_cxt.c b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
index af106be..afd07ad 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c
@@ -2069,6 +2069,12 @@ static void qed_rdma_set_pf_params(struct qed_hwfn *p_hwfn,
num_srqs = min_t(u32, 32 * 1024, p_params->num_srqs);
+ if (p_hwfn->mcp_info->func_info.protocol == QED_PCI_ETH_RDMA) {
+ DP_NOTICE(p_hwfn,
+ "Current day drivers don't support RoCE & iWARP simultaneously on the same PF. Default to RoCE-only\n");
+ p_hwfn->hw_info.personality = QED_PCI_ETH_ROCE;
+ }
+
switch (p_hwfn->hw_info.personality) {
case QED_PCI_ETH_IWARP:
/* Each QP requires one connection */
diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.c b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
index 376485d..8b99c7d 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_mcp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.c
@@ -1691,12 +1691,12 @@ int qed_mcp_get_media_type(struct qed_dev *cdev, u32 *p_media_type)
case FW_MB_PARAM_GET_PF_RDMA_ROCE:
*p_proto = QED_PCI_ETH_ROCE;
break;
- case FW_MB_PARAM_GET_PF_RDMA_BOTH:
- DP_NOTICE(p_hwfn,
- "Current day drivers don't support RoCE & iWARP. Default to RoCE-only\n");
- *p_proto = QED_PCI_ETH_ROCE;
- break;
case FW_MB_PARAM_GET_PF_RDMA_IWARP:
+ *p_proto = QED_PCI_ETH_IWARP;
+ break;
+ case FW_MB_PARAM_GET_PF_RDMA_BOTH:
+ *p_proto = QED_PCI_ETH_RDMA;
+ break;
default:
DP_NOTICE(p_hwfn,
"MFW answers GET_PF_RDMA_PROTOCOL but param is %08x\n",
diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
index 6fb9951..06715f7 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
@@ -156,7 +156,10 @@ static int qed_rdma_alloc(struct qed_hwfn *p_hwfn,
return rc;
p_hwfn->p_rdma_info = p_rdma_info;
- p_rdma_info->proto = PROTOCOLID_ROCE;
+ if (QED_IS_IWARP_PERSONALITY(p_hwfn))
+ p_rdma_info->proto = PROTOCOLID_IWARP;
+ else
+ p_rdma_info->proto = PROTOCOLID_ROCE;
num_cons = qed_cxt_get_proto_cid_count(p_hwfn, p_rdma_info->proto,
NULL);
diff --git a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c
index 46d0c3c..a1d33f3 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_sp_commands.c
@@ -377,6 +377,7 @@ int qed_sp_pf_start(struct qed_hwfn *p_hwfn,
p_ramrod->personality = PERSONALITY_ISCSI;
break;
case QED_PCI_ETH_ROCE:
+ case QED_PCI_ETH_IWARP:
p_ramrod->personality = PERSONALITY_RDMA_AND_ETH;
break;
default:
--
1.8.3.1
^ permalink raw reply related
* [PATCH net-next 2/4] qed: Add iWARP out of order support
From: Michal Kalderon @ 2017-09-19 17:26 UTC (permalink / raw)
To: davem, netdev; +Cc: linux-rdma, dledford, Michal Kalderon, Ariel Elior
In-Reply-To: <1505841979-26365-1-git-send-email-Michal.Kalderon@cavium.com>
iWARP requires OOO support which is already provided by the ll2
interface (until now was used only for iSCSI offload).
The changes mostly include opening a ll2 dedicated connection for
OOO and notifiying the FW about the handle id.
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
---
drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 44 +++++++++++++++++++++++++++++
drivers/net/ethernet/qlogic/qed/qed_iwarp.h | 11 +++++++-
drivers/net/ethernet/qlogic/qed/qed_rdma.c | 7 +++--
3 files changed, 59 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
index 9d989c9..568e985 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
@@ -41,6 +41,7 @@
#include "qed_rdma.h"
#include "qed_reg_addr.h"
#include "qed_sp.h"
+#include "qed_ooo.h"
#define QED_IWARP_ORD_DEFAULT 32
#define QED_IWARP_IRD_DEFAULT 32
@@ -119,6 +120,13 @@ static void qed_iwarp_cid_cleaned(struct qed_hwfn *p_hwfn, u32 cid)
spin_unlock_bh(&p_hwfn->p_rdma_info->lock);
}
+void qed_iwarp_init_fw_ramrod(struct qed_hwfn *p_hwfn,
+ struct iwarp_init_func_params *p_ramrod)
+{
+ p_ramrod->ll2_ooo_q_index = RESC_START(p_hwfn, QED_LL2_QUEUE) +
+ p_hwfn->p_rdma_info->iwarp.ll2_ooo_handle;
+}
+
static int qed_iwarp_alloc_cid(struct qed_hwfn *p_hwfn, u32 *cid)
{
int rc;
@@ -1876,6 +1884,16 @@ static int qed_iwarp_ll2_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
iwarp_info->ll2_syn_handle = QED_IWARP_HANDLE_INVAL;
}
+ if (iwarp_info->ll2_ooo_handle != QED_IWARP_HANDLE_INVAL) {
+ rc = qed_ll2_terminate_connection(p_hwfn,
+ iwarp_info->ll2_ooo_handle);
+ if (rc)
+ DP_INFO(p_hwfn, "Failed to terminate ooo connection\n");
+
+ qed_ll2_release_connection(p_hwfn, iwarp_info->ll2_ooo_handle);
+ iwarp_info->ll2_ooo_handle = QED_IWARP_HANDLE_INVAL;
+ }
+
qed_llh_remove_mac_filter(p_hwfn,
p_ptt, p_hwfn->p_rdma_info->iwarp.mac_addr);
return rc;
@@ -1927,10 +1945,12 @@ static int qed_iwarp_ll2_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
struct qed_iwarp_info *iwarp_info;
struct qed_ll2_acquire_data data;
struct qed_ll2_cbs cbs;
+ u16 n_ooo_bufs;
int rc = 0;
iwarp_info = &p_hwfn->p_rdma_info->iwarp;
iwarp_info->ll2_syn_handle = QED_IWARP_HANDLE_INVAL;
+ iwarp_info->ll2_ooo_handle = QED_IWARP_HANDLE_INVAL;
iwarp_info->max_mtu = params->max_mtu;
@@ -1978,6 +1998,29 @@ static int qed_iwarp_ll2_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
if (rc)
goto err;
+ /* Start OOO connection */
+ data.input.conn_type = QED_LL2_TYPE_OOO;
+ data.input.mtu = params->max_mtu;
+
+ n_ooo_bufs = (QED_IWARP_MAX_OOO * QED_IWARP_RCV_WND_SIZE_DEF) /
+ iwarp_info->max_mtu;
+ n_ooo_bufs = min_t(u32, n_ooo_bufs, QED_IWARP_LL2_OOO_MAX_RX_SIZE);
+
+ data.input.rx_num_desc = n_ooo_bufs;
+ data.input.rx_num_ooo_buffers = n_ooo_bufs;
+
+ data.input.tx_max_bds_per_packet = 1; /* will never be fragmented */
+ data.input.tx_num_desc = QED_IWARP_LL2_OOO_DEF_TX_SIZE;
+ data.p_connection_handle = &iwarp_info->ll2_ooo_handle;
+
+ rc = qed_ll2_acquire_connection(p_hwfn, &data);
+ if (rc)
+ goto err;
+
+ rc = qed_ll2_establish_connection(p_hwfn, iwarp_info->ll2_ooo_handle);
+ if (rc)
+ goto err;
+
return rc;
err:
qed_iwarp_ll2_stop(p_hwfn, p_ptt);
@@ -2014,6 +2057,7 @@ int qed_iwarp_setup(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
qed_spq_register_async_cb(p_hwfn, PROTOCOLID_IWARP,
qed_iwarp_async_event);
+ qed_ooo_setup(p_hwfn);
return qed_iwarp_ll2_start(p_hwfn, params, p_ptt);
}
diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.h b/drivers/net/ethernet/qlogic/qed/qed_iwarp.h
index 148ef3c..9e2bfde 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.h
+++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.h
@@ -47,7 +47,12 @@ enum qed_iwarp_qp_state {
#define QED_IWARP_LL2_SYN_TX_SIZE (128)
#define QED_IWARP_LL2_SYN_RX_SIZE (256)
#define QED_IWARP_MAX_SYN_PKT_SIZE (128)
-#define QED_IWARP_HANDLE_INVAL (0xff)
+
+#define QED_IWARP_LL2_OOO_DEF_TX_SIZE (256)
+#define QED_IWARP_MAX_OOO (16)
+#define QED_IWARP_LL2_OOO_MAX_RX_SIZE (16384)
+
+#define QED_IWARP_HANDLE_INVAL (0xff)
struct qed_iwarp_ll2_buff {
void *data;
@@ -67,6 +72,7 @@ struct qed_iwarp_info {
u8 crc_needed;
u8 tcp_flags;
u8 ll2_syn_handle;
+ u8 ll2_ooo_handle;
u8 peer2peer;
enum mpa_negotiation_mode mpa_rev;
enum mpa_rtr_type rtr_type;
@@ -147,6 +153,9 @@ struct qed_iwarp_listener {
int qed_iwarp_setup(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
struct qed_rdma_start_in_params *params);
+void qed_iwarp_init_fw_ramrod(struct qed_hwfn *p_hwfn,
+ struct iwarp_init_func_params *p_ramrod);
+
int qed_iwarp_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt);
void qed_iwarp_resc_free(struct qed_hwfn *p_hwfn);
diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
index 06715f7..4f46f28 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
@@ -551,10 +551,13 @@ static int qed_rdma_start_fw(struct qed_hwfn *p_hwfn,
if (rc)
return rc;
- if (QED_IS_IWARP_PERSONALITY(p_hwfn))
+ if (QED_IS_IWARP_PERSONALITY(p_hwfn)) {
+ qed_iwarp_init_fw_ramrod(p_hwfn,
+ &p_ent->ramrod.iwarp_init_func.iwarp);
p_ramrod = &p_ent->ramrod.iwarp_init_func.rdma;
- else
+ } else {
p_ramrod = &p_ent->ramrod.roce_init_func.rdma;
+ }
p_params_header = &p_ramrod->params_header;
p_params_header->cnq_start_offset = (u8)RESC_START(p_hwfn,
--
1.8.3.1
^ permalink raw reply related
* [PATCH net-next 3/4] qed: Fix maximum number of CQs for iWARP
From: Michal Kalderon @ 2017-09-19 17:26 UTC (permalink / raw)
To: davem, netdev; +Cc: linux-rdma, dledford, Michal Kalderon, Ariel Elior
In-Reply-To: <1505841979-26365-1-git-send-email-Michal.Kalderon@cavium.com>
The maximum number of CQs supported is bound to the number
of connections supported, which differs between RoCE and iWARP.
This fixes a crash that occurred in iWARP when running 1000 sessions
using perftest.
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
---
drivers/net/ethernet/qlogic/qed/qed_rdma.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
index 4f46f28..c8c4b39 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
@@ -209,11 +209,11 @@ static int qed_rdma_alloc(struct qed_hwfn *p_hwfn,
goto free_pd_map;
}
- /* Allocate bitmap for cq's. The maximum number of CQs is bounded to
- * twice the number of QPs.
+ /* Allocate bitmap for cq's. The maximum number of CQs is bound to
+ * the number of connections we support. (num_qps in iWARP or
+ * num_qps/2 in RoCE).
*/
- rc = qed_rdma_bmap_alloc(p_hwfn, &p_rdma_info->cq_map,
- p_rdma_info->num_qps * 2, "CQ");
+ rc = qed_rdma_bmap_alloc(p_hwfn, &p_rdma_info->cq_map, num_cons, "CQ");
if (rc) {
DP_VERBOSE(p_hwfn, QED_MSG_RDMA,
"Failed to allocate cq bitmap, rc = %d\n", rc);
@@ -222,10 +222,10 @@ static int qed_rdma_alloc(struct qed_hwfn *p_hwfn,
/* Allocate bitmap for toggle bit for cq icids
* We toggle the bit every time we create or resize cq for a given icid.
- * The maximum number of CQs is bounded to twice the number of QPs.
+ * Size needs to equal the size of the cq bmap.
*/
rc = qed_rdma_bmap_alloc(p_hwfn, &p_rdma_info->toggle_bits,
- p_rdma_info->num_qps * 2, "Toggle");
+ num_cons, "Toggle");
if (rc) {
DP_VERBOSE(p_hwfn, QED_MSG_RDMA,
"Failed to allocate toogle bits, rc = %d\n", rc);
--
1.8.3.1
^ permalink raw reply related
* [PATCH net-next 4/4] qed: iWARP - Add check for errors on a SYN packet
From: Michal Kalderon @ 2017-09-19 17:26 UTC (permalink / raw)
To: davem, netdev; +Cc: linux-rdma, dledford, Michal Kalderon, Ariel Elior
In-Reply-To: <1505841979-26365-1-git-send-email-Michal.Kalderon@cavium.com>
A SYN packet which arrives with errors from FW should be dropped.
This required adding an additional field to the ll2
rx completion data.
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
---
drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 8 ++++++++
drivers/net/ethernet/qlogic/qed/qed_ll2.c | 1 +
include/linux/qed/qed_ll2_if.h | 1 +
3 files changed, 10 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
index 568e985..8fc9c811 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
@@ -1733,6 +1733,14 @@ int qed_iwarp_reject(void *rdma_cxt, struct qed_iwarp_reject_in *iparams)
memset(&cm_info, 0, sizeof(cm_info));
ll2_syn_handle = p_hwfn->p_rdma_info->iwarp.ll2_syn_handle;
+
+ /* Check if packet was received with errors... */
+ if (data->err_flags) {
+ DP_NOTICE(p_hwfn, "Error received on SYN packet: 0x%x\n",
+ data->err_flags);
+ goto err;
+ }
+
if (GET_FIELD(data->parse_flags,
PARSING_AND_ERR_FLAGS_L4CHKSMWASCALCULATED) &&
GET_FIELD(data->parse_flags, PARSING_AND_ERR_FLAGS_L4CHKSMERROR)) {
diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.c b/drivers/net/ethernet/qlogic/qed/qed_ll2.c
index c06ad4f..250afa5 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_ll2.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.c
@@ -413,6 +413,7 @@ static void qed_ll2_rxq_parse_reg(struct qed_hwfn *p_hwfn,
struct qed_ll2_comp_rx_data *data)
{
data->parse_flags = le16_to_cpu(p_cqe->rx_cqe_fp.parse_flags.flags);
+ data->err_flags = le16_to_cpu(p_cqe->rx_cqe_fp.err_flags.flags);
data->length.packet_length =
le16_to_cpu(p_cqe->rx_cqe_fp.packet_length);
data->vlan = le16_to_cpu(p_cqe->rx_cqe_fp.vlan);
diff --git a/include/linux/qed/qed_ll2_if.h b/include/linux/qed/qed_ll2_if.h
index dd7a3b8..89fa0bb 100644
--- a/include/linux/qed/qed_ll2_if.h
+++ b/include/linux/qed/qed_ll2_if.h
@@ -101,6 +101,7 @@ struct qed_ll2_comp_rx_data {
void *cookie;
dma_addr_t rx_buf_addr;
u16 parse_flags;
+ u16 err_flags;
u16 vlan;
bool b_last_packet;
u8 connection_handle;
--
1.8.3.1
^ permalink raw reply related
* [PATCH] net: emac: Fix napi poll list corruption
From: Christian Lamparter @ 2017-09-19 17:35 UTC (permalink / raw)
To: netdev; +Cc: David S . Miller
This patch is pretty much a carbon copy of
commit 3079c652141f ("caif: Fix napi poll list corruption")
with "caif" replaced by "emac".
The commit d75b1ade567f ("net: less interrupt masking in NAPI")
breaks emac.
It is now required that if the entire budget is consumed when poll
returns, the napi poll_list must remain empty. However, like some
other drivers emac tries to do a last-ditch check and if there is
more work it will call napi_reschedule and then immediately process
some of this new work. Should the entire budget be consumed while
processing such new work then we will violate the new caller
contract.
This patch fixes this by not touching any work when we reschedule
in emac.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
---
drivers/net/ethernet/ibm/emac/mal.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/ibm/emac/mal.c b/drivers/net/ethernet/ibm/emac/mal.c
index 2c74baa2398a..fff09dcf9e34 100644
--- a/drivers/net/ethernet/ibm/emac/mal.c
+++ b/drivers/net/ethernet/ibm/emac/mal.c
@@ -402,7 +402,7 @@ static int mal_poll(struct napi_struct *napi, int budget)
unsigned long flags;
MAL_DBG2(mal, "poll(%d)" NL, budget);
- again:
+
/* Process TX skbs */
list_for_each(l, &mal->poll_list) {
struct mal_commac *mc =
@@ -451,7 +451,6 @@ static int mal_poll(struct napi_struct *napi, int budget)
spin_lock_irqsave(&mal->lock, flags);
mal_disable_eob_irq(mal);
spin_unlock_irqrestore(&mal->lock, flags);
- goto again;
}
mc->ops->poll_tx(mc->dev);
}
--
2.14.1
^ permalink raw reply related
* Development Setup
From: sdnlabs Janakaraj @ 2017-09-19 17:35 UTC (permalink / raw)
To: netdev-u79uwXL29TY76Z2rM5mHXA, dev-yBygre7rU0TnMu66kgdUjQ,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Dear all,
I am new a newbie, I am curious to know what development tools with Ubuntu
as Host OS, will best fit for people entering into linux kernel development
focusing on Netlink, Netdev and Wireless MAC.
I have read many blogs describing the basic setup and things like that. But
I felt input from the current developers in the same field will be more
useful.
Thanks,
Prabhu
^ permalink raw reply
* Re: [PATCH net] bpf: do not disable/enable BH in bpf_map_free_id()
From: Martin KaFai Lau @ 2017-09-19 17:36 UTC (permalink / raw)
To: Eric Dumazet; +Cc: David Miller, Alexei Starovoitov, netdev
In-Reply-To: <1505837759.29839.64.camel@edumazet-glaptop3.roam.corp.google.com>
On Tue, Sep 19, 2017 at 04:15:59PM +0000, Eric Dumazet wrote:
> From: Eric Dumazet <edumazet@google.com>
>
> syzkaller reported following splat [1]
>
> Since hard irq are disabled by the caller, bpf_map_free_id()
> should not try to enable/disable BH.
>
> Another solution would be to change htab_map_delete_elem() to
> defer the free_htab_elem() call after
> raw_spin_unlock_irqrestore(&b->lock, flags), but this might be not
> enough to cover other code paths.
Thanks for fixing it.
Acked-by: Martin KaFai Lau <kafai@fb.com>
^ permalink raw reply
* Re: [PATCH] VSOCK: fix uapi/linux/vm_sockets.h incomplete types
From: David Miller @ 2017-09-19 17:38 UTC (permalink / raw)
To: stefanha; +Cc: netdev, jhansen
In-Reply-To: <20170918152100.GF4141@stefanha-x1.localdomain>
From: Stefan Hajnoczi <stefanha@redhat.com>
Date: Mon, 18 Sep 2017 16:21:00 +0100
> On Fri, Sep 15, 2017 at 02:14:32PM -0700, David Miller wrote:
>> > diff --git a/include/uapi/linux/vm_sockets.h b/include/uapi/linux/vm_sockets.h
>> > index b4ed5d895699..4ae5c625ac56 100644
>> > --- a/include/uapi/linux/vm_sockets.h
>> > +++ b/include/uapi/linux/vm_sockets.h
>> > @@ -18,6 +18,10 @@
>> >
>> > #include <linux/socket.h>
>> >
>> > +#ifndef __KERNEL__
>> > +#include <sys/socket.h> /* struct sockaddr */
>> > +#endif
>> > +
>>
>> There is no precedence whatsoever to include sys/socket.h in _any_ UAPI
>> header file provided by the kernel.
>
> <linux/if.h> does it for the same reason:
>
> include/uapi/linux/if.h:#include <sys/socket.h> /* for struct sockaddr. */
You don't need it for struct sockaddr, you need it for sa_family_t,
the comment is very misleading.
Please do as I have instructed and it will fix this problem.
Thank you.
^ permalink raw reply
* Re: [PATCH net] MAINTAINERS: Remove Yuval Mintz from maintainers list
From: David Miller @ 2017-09-19 17:39 UTC (permalink / raw)
To: aelior; +Cc: netdev, everest-linux-l2
In-Reply-To: <20170919095434.1386-1-aelior@cavium.com>
From: <aelior@cavium.com>
Date: Tue, 19 Sep 2017 12:54:34 +0300
> From: Ariel Elior <aelior@cavium.com>
>
> Remove Yuval from maintaining the bnx2x & qed* modules as he is no longer
> working for the company. Thanks Yuval for your huge contributions and
> tireless efforts over the many years and various companies.
>
> Ariel
> Signed-off-by: Ariel Elior <aelior@cavium.com>
Applied, thanks.
^ permalink raw reply
* Re: [RFC PATCH 3/3] usbnet: Fix memory leak when rx_submit() fails
From: Bjørn Mork @ 2017-09-19 17:41 UTC (permalink / raw)
To: Douglas Anderson
Cc: Oliver Neukum, groeck, grundler, netdev, linux-usb, linux-kernel
In-Reply-To: <20170919161522.995-3-dianders@chromium.org>
Douglas Anderson <dianders@chromium.org> writes:
> If rx_submit() returns an error code then nobody calls usb_free_urb().
> That means it's leaked.
Nope. rx_submit() will call usb_free_urb() before returning an error:
static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
..
if (!skb) {
netif_dbg(dev, rx_err, dev->net, "no rx skb\n");
usbnet_defer_kevent (dev, EVENT_RX_MEMORY);
usb_free_urb (urb);
return -ENOMEM;
}
..
if (retval) {
dev_kfree_skb_any (skb);
usb_free_urb (urb);
}
Bjørn
^ permalink raw reply
* Re: [PATCH net-next 07/14] gtp: Support encapsulation of IPv6 packets
From: David Miller @ 2017-09-19 17:42 UTC (permalink / raw)
To: laforge; +Cc: tom, netdev, pablo, rohit
In-Reply-To: <20170919121245.t555dqwndhewmdyw@nataraja>
From: Harald Welte <laforge@gnumonks.org>
Date: Tue, 19 Sep 2017 20:12:45 +0800
> Hi Dave,
>
> On Mon, Sep 18, 2017 at 09:19:08PM -0700, David Miller wrote:
>
>> > +static inline u32 ipv6_hashfn(const struct in6_addr *a)
>> > +{
>> > + return __ipv6_addr_jhash(a, gtp_h_initval);
>> > +}
>>
>> I know you are just following the pattern of the existing "ipv4_hashfn()" here
>> but this kind of stuff is not very global namespace friendly. Even simply
>> adding a "gtp_" prefix to these hash functions would be a lot better.
>
> I would agree if this was an inline function defined in a header file or
> a non-static function. But where is the global namespace concern in
> case of static inline functions defined and used in the same .c file?
The problem is if we create a generic ipv6_hashfn() in linux/ipv6.h or
something like that, then this driver stops building.
^ permalink raw reply
* Re: [PATCH net-next 03/14] gtp: Call common functions to get tunnel routes and add dst_cache
From: David Miller @ 2017-09-19 17:44 UTC (permalink / raw)
To: laforge; +Cc: tom, netdev, pablo, rohit
In-Reply-To: <20170919120942.dpy5kmkhzws7pqd5@nataraja>
From: Harald Welte <laforge@gnumonks.org>
Date: Tue, 19 Sep 2017 20:09:42 +0800
> So I guess you're asking us to document that rationale as form of a
> source code comment ?
Yes that would make ignoring the potential changing of the non-const
'saddr' argument at least be documented.
^ permalink raw reply
* Re: [PATCH net-next 2/4] qed: Add iWARP out of order support
From: Leon Romanovsky @ 2017-09-19 17:45 UTC (permalink / raw)
To: Michal Kalderon
Cc: davem-fT/PcQaiUtIeIZ0/mPfg9Q, netdev-u79uwXL29TY76Z2rM5mHXA,
linux-rdma-u79uwXL29TY76Z2rM5mHXA,
dledford-H+wXaHxf7aLQT0dZR+AlfA, Ariel Elior
In-Reply-To: <1505841979-26365-3-git-send-email-Michal.Kalderon-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 6380 bytes --]
On Tue, Sep 19, 2017 at 08:26:17PM +0300, Michal Kalderon wrote:
> iWARP requires OOO support which is already provided by the ll2
> interface (until now was used only for iSCSI offload).
> The changes mostly include opening a ll2 dedicated connection for
> OOO and notifiying the FW about the handle id.
>
> Signed-off-by: Michal Kalderon <Michal.Kalderon-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>
> Signed-off-by: Ariel Elior <Ariel.Elior-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>
> ---
> drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 44 +++++++++++++++++++++++++++++
> drivers/net/ethernet/qlogic/qed/qed_iwarp.h | 11 +++++++-
> drivers/net/ethernet/qlogic/qed/qed_rdma.c | 7 +++--
> 3 files changed, 59 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
> index 9d989c9..568e985 100644
> --- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
> +++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
> @@ -41,6 +41,7 @@
> #include "qed_rdma.h"
> #include "qed_reg_addr.h"
> #include "qed_sp.h"
> +#include "qed_ooo.h"
>
> #define QED_IWARP_ORD_DEFAULT 32
> #define QED_IWARP_IRD_DEFAULT 32
> @@ -119,6 +120,13 @@ static void qed_iwarp_cid_cleaned(struct qed_hwfn *p_hwfn, u32 cid)
> spin_unlock_bh(&p_hwfn->p_rdma_info->lock);
> }
>
> +void qed_iwarp_init_fw_ramrod(struct qed_hwfn *p_hwfn,
> + struct iwarp_init_func_params *p_ramrod)
> +{
> + p_ramrod->ll2_ooo_q_index = RESC_START(p_hwfn, QED_LL2_QUEUE) +
> + p_hwfn->p_rdma_info->iwarp.ll2_ooo_handle;
> +}
> +
> static int qed_iwarp_alloc_cid(struct qed_hwfn *p_hwfn, u32 *cid)
> {
> int rc;
> @@ -1876,6 +1884,16 @@ static int qed_iwarp_ll2_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
> iwarp_info->ll2_syn_handle = QED_IWARP_HANDLE_INVAL;
> }
>
> + if (iwarp_info->ll2_ooo_handle != QED_IWARP_HANDLE_INVAL) {
> + rc = qed_ll2_terminate_connection(p_hwfn,
> + iwarp_info->ll2_ooo_handle);
> + if (rc)
> + DP_INFO(p_hwfn, "Failed to terminate ooo connection\n");
What exactly will you do with this knowledge? Anyway you are not
interested in return values of qed_ll2_terminate_connection function in
this place and other places too.
Why don't you handle EAGAIN returned from the qed_ll2_terminate_connection()?
Thanks
> +
> + qed_ll2_release_connection(p_hwfn, iwarp_info->ll2_ooo_handle);
> + iwarp_info->ll2_ooo_handle = QED_IWARP_HANDLE_INVAL;
> + }
> +
> qed_llh_remove_mac_filter(p_hwfn,
> p_ptt, p_hwfn->p_rdma_info->iwarp.mac_addr);
> return rc;
> @@ -1927,10 +1945,12 @@ static int qed_iwarp_ll2_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
> struct qed_iwarp_info *iwarp_info;
> struct qed_ll2_acquire_data data;
> struct qed_ll2_cbs cbs;
> + u16 n_ooo_bufs;
> int rc = 0;
>
> iwarp_info = &p_hwfn->p_rdma_info->iwarp;
> iwarp_info->ll2_syn_handle = QED_IWARP_HANDLE_INVAL;
> + iwarp_info->ll2_ooo_handle = QED_IWARP_HANDLE_INVAL;
>
> iwarp_info->max_mtu = params->max_mtu;
>
> @@ -1978,6 +1998,29 @@ static int qed_iwarp_ll2_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt)
> if (rc)
> goto err;
>
> + /* Start OOO connection */
> + data.input.conn_type = QED_LL2_TYPE_OOO;
> + data.input.mtu = params->max_mtu;
> +
> + n_ooo_bufs = (QED_IWARP_MAX_OOO * QED_IWARP_RCV_WND_SIZE_DEF) /
> + iwarp_info->max_mtu;
> + n_ooo_bufs = min_t(u32, n_ooo_bufs, QED_IWARP_LL2_OOO_MAX_RX_SIZE);
> +
> + data.input.rx_num_desc = n_ooo_bufs;
> + data.input.rx_num_ooo_buffers = n_ooo_bufs;
> +
> + data.input.tx_max_bds_per_packet = 1; /* will never be fragmented */
> + data.input.tx_num_desc = QED_IWARP_LL2_OOO_DEF_TX_SIZE;
> + data.p_connection_handle = &iwarp_info->ll2_ooo_handle;
> +
> + rc = qed_ll2_acquire_connection(p_hwfn, &data);
> + if (rc)
> + goto err;
> +
> + rc = qed_ll2_establish_connection(p_hwfn, iwarp_info->ll2_ooo_handle);
> + if (rc)
> + goto err;
> +
> return rc;
> err:
> qed_iwarp_ll2_stop(p_hwfn, p_ptt);
> @@ -2014,6 +2057,7 @@ int qed_iwarp_setup(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
>
> qed_spq_register_async_cb(p_hwfn, PROTOCOLID_IWARP,
> qed_iwarp_async_event);
> + qed_ooo_setup(p_hwfn);
>
> return qed_iwarp_ll2_start(p_hwfn, params, p_ptt);
> }
> diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.h b/drivers/net/ethernet/qlogic/qed/qed_iwarp.h
> index 148ef3c..9e2bfde 100644
> --- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.h
> +++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.h
> @@ -47,7 +47,12 @@ enum qed_iwarp_qp_state {
> #define QED_IWARP_LL2_SYN_TX_SIZE (128)
> #define QED_IWARP_LL2_SYN_RX_SIZE (256)
> #define QED_IWARP_MAX_SYN_PKT_SIZE (128)
> -#define QED_IWARP_HANDLE_INVAL (0xff)
> +
> +#define QED_IWARP_LL2_OOO_DEF_TX_SIZE (256)
> +#define QED_IWARP_MAX_OOO (16)
> +#define QED_IWARP_LL2_OOO_MAX_RX_SIZE (16384)
> +
> +#define QED_IWARP_HANDLE_INVAL (0xff)
>
> struct qed_iwarp_ll2_buff {
> void *data;
> @@ -67,6 +72,7 @@ struct qed_iwarp_info {
> u8 crc_needed;
> u8 tcp_flags;
> u8 ll2_syn_handle;
> + u8 ll2_ooo_handle;
> u8 peer2peer;
> enum mpa_negotiation_mode mpa_rev;
> enum mpa_rtr_type rtr_type;
> @@ -147,6 +153,9 @@ struct qed_iwarp_listener {
> int qed_iwarp_setup(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
> struct qed_rdma_start_in_params *params);
>
> +void qed_iwarp_init_fw_ramrod(struct qed_hwfn *p_hwfn,
> + struct iwarp_init_func_params *p_ramrod);
> +
> int qed_iwarp_stop(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt);
>
> void qed_iwarp_resc_free(struct qed_hwfn *p_hwfn);
> diff --git a/drivers/net/ethernet/qlogic/qed/qed_rdma.c b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
> index 06715f7..4f46f28 100644
> --- a/drivers/net/ethernet/qlogic/qed/qed_rdma.c
> +++ b/drivers/net/ethernet/qlogic/qed/qed_rdma.c
> @@ -551,10 +551,13 @@ static int qed_rdma_start_fw(struct qed_hwfn *p_hwfn,
> if (rc)
> return rc;
>
> - if (QED_IS_IWARP_PERSONALITY(p_hwfn))
> + if (QED_IS_IWARP_PERSONALITY(p_hwfn)) {
> + qed_iwarp_init_fw_ramrod(p_hwfn,
> + &p_ent->ramrod.iwarp_init_func.iwarp);
> p_ramrod = &p_ent->ramrod.iwarp_init_func.rdma;
> - else
> + } else {
> p_ramrod = &p_ent->ramrod.roce_init_func.rdma;
> + }
>
> p_params_header = &p_ramrod->params_header;
> p_params_header->cnq_start_offset = (u8)RESC_START(p_hwfn,
> --
> 1.8.3.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply
* Re: [RFC PATCH 1/3] usbnet: Get rid of spammy usbnet "kevent X may have been dropped"
From: Bjørn Mork @ 2017-09-19 17:45 UTC (permalink / raw)
To: Douglas Anderson
Cc: Oliver Neukum, groeck, grundler, netdev, linux-usb, linux-kernel
In-Reply-To: <20170919161522.995-1-dianders@chromium.org>
Douglas Anderson <dianders@chromium.org> writes:
> Every once in a while when my system is under a bit of stress I see
> some spammy messages show up in my logs that say:
>
> kevent X may have been dropped
>
> As far as I can tell these messages aren't terribly useful.
I agree, FWIW. These messages just confuse users for no purpose at all.
> + /* If work is already started this will mark it to run again when it
> + * finishes; if we already had work pending and it hadn't started
> + * yet then that's fine too.
> + */
> + schedule_work (&dev->kevent);
> + netdev_dbg(dev->net, "kevent %d scheduled\n", work);
Or maybe
if (schedule_work (&dev->kevent))
netdev_dbg(dev->net, "kevent %d scheduled\n", work);
? Not that I think it matters much.
Bjørn
^ permalink raw reply
* [PATCH net] net: change skb->mac_header when Generic XDP calls adjust_head
From: Edward Cree @ 2017-09-19 17:45 UTC (permalink / raw)
To: David Miller; +Cc: netdev
Since XDP's view of the packet includes the MAC header, moving the start-
of-packet with bpf_xdp_adjust_head needs to also update the offset of the
MAC header (which is relative to skb->head, not to the skb->data that was
changed).
Without this, tcpdump sees packets starting from the old MAC header rather
than the new one, at least in my tests on the loopback device.
Fixes: b5cdae3291f7 ("net: Generic XDP")
Signed-off-by: Edward Cree <ecree@solarflare.com>
---
net/core/dev.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/net/core/dev.c b/net/core/dev.c
index fb766d9..9a2254f 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -3892,6 +3892,7 @@ static u32 netif_receive_generic_xdp(struct sk_buff *skb,
__skb_pull(skb, off);
else if (off < 0)
__skb_push(skb, -off);
+ skb->mac_header += off;
switch (act) {
case XDP_REDIRECT:
^ permalink raw reply related
* Re: [PATCH net-next 3/4] qed: Fix maximum number of CQs for iWARP
From: Leon Romanovsky @ 2017-09-19 17:46 UTC (permalink / raw)
To: Michal Kalderon
Cc: davem-fT/PcQaiUtIeIZ0/mPfg9Q, netdev-u79uwXL29TY76Z2rM5mHXA,
linux-rdma-u79uwXL29TY76Z2rM5mHXA,
dledford-H+wXaHxf7aLQT0dZR+AlfA, Ariel Elior
In-Reply-To: <1505841979-26365-4-git-send-email-Michal.Kalderon-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 505 bytes --]
On Tue, Sep 19, 2017 at 08:26:18PM +0300, Michal Kalderon wrote:
> The maximum number of CQs supported is bound to the number
> of connections supported, which differs between RoCE and iWARP.
>
> This fixes a crash that occurred in iWARP when running 1000 sessions
> using perftest.
>
> Signed-off-by: Michal Kalderon <Michal.Kalderon-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>
> Signed-off-by: Ariel Elior <Ariel.Elior-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>
> ---
It is worth to add Fixes line.
Thanks
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply
* [PATCH net-next v3 00/12] net: dsa: b53/bcm_sf2 cleanups
From: Florian Fainelli @ 2017-09-19 17:46 UTC (permalink / raw)
To: netdev; +Cc: davem, andrew, vivien.didelot, Florian Fainelli
Hi all,
This patch series is a first pass set of clean-ups to reduce the number of LOCs
between b53 and bcm_sf2 and sharing as many functions as possible.
There is a number of additional cleanups queued up locally that require more
thorough testing.
Thanks!
Changes in v3:
- remove one extra argument for the b53_build_io_op macro (David Laight)
- added additional Reviewed-by tags from Vivien
Changes in v2:
- added Reviewed-by tags from Vivien
- added a missing EXPORT_SYMBOL() in patch 8
- fixed a typo in patch 5
Florian Fainelli (12):
net: dsa: b53: Remove is_cpu_port()
net: dsa: b53: Make b53_enable_cpu_port() take a port argument
net: dsa: b53: Defer port enabling to calling port_enable
net: dsa: bcm_sf2: Defer port enabling to calling port_enable
net: dsa: b53: Use a macro to define I/O operations
net: dsa: b53: Move Broadcom header setup to b53
net: dsa: b53: Define EEE register page
net: dsa: b53: Move EEE functions to b53
net: dsa: b53: Wire-up EEE
net: dsa: b53: Export b53_imp_vlan_setup()
net: dsa: bcm_sf2: Use SF2_NUM_EGRESS_QUEUES for CFP
net: dsa: bcm_sf2: Utilize b53_{enable,disable}_port
drivers/net/dsa/b53/b53_common.c | 151 ++++++++++++++++++++++++++++++++----
drivers/net/dsa/b53/b53_priv.h | 145 ++++++++---------------------------
drivers/net/dsa/b53/b53_regs.h | 48 ++++++++++++
drivers/net/dsa/bcm_sf2.c | 161 +++------------------------------------
drivers/net/dsa/bcm_sf2.h | 2 -
drivers/net/dsa/bcm_sf2_cfp.c | 6 +-
drivers/net/dsa/bcm_sf2_regs.h | 11 ---
7 files changed, 228 insertions(+), 296 deletions(-)
--
2.9.3
^ permalink raw reply
* [PATCH net-next v3 01/12] net: dsa: b53: Remove is_cpu_port()
From: Florian Fainelli @ 2017-09-19 17:46 UTC (permalink / raw)
To: netdev; +Cc: davem, andrew, vivien.didelot, Florian Fainelli
In-Reply-To: <20170919174654.2122-1-f.fainelli@gmail.com>
This is not used anywhere, so remove it.
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/b53/b53_priv.h | 5 -----
1 file changed, 5 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 01bd8cbe9a3f..7528b22aeb03 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -186,11 +186,6 @@ static inline int is58xx(struct b53_device *dev)
#define B53_CPU_PORT_25 5
#define B53_CPU_PORT 8
-static inline int is_cpu_port(struct b53_device *dev, int port)
-{
- return dev->cpu_port;
-}
-
struct b53_device *b53_switch_alloc(struct device *base,
const struct b53_io_ops *ops,
void *priv);
--
2.9.3
^ permalink raw reply related
* [PATCH net-next v3 02/12] net: dsa: b53: Make b53_enable_cpu_port() take a port argument
From: Florian Fainelli @ 2017-09-19 17:46 UTC (permalink / raw)
To: netdev; +Cc: davem, andrew, vivien.didelot, Florian Fainelli
In-Reply-To: <20170919174654.2122-1-f.fainelli@gmail.com>
In preparation for future changes allowing the configuring of multiple
CPU ports, make b53_enable_cpu_port() take a port argument.
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/b53/b53_common.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 274f3679f33d..d8bc54cfcfbe 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -538,19 +538,18 @@ static void b53_disable_port(struct dsa_switch *ds, int port,
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
}
-static void b53_enable_cpu_port(struct b53_device *dev)
+static void b53_enable_cpu_port(struct b53_device *dev, int port)
{
- unsigned int cpu_port = dev->cpu_port;
u8 port_ctrl;
/* BCM5325 CPU port is at 8 */
- if ((is5325(dev) || is5365(dev)) && cpu_port == B53_CPU_PORT_25)
- cpu_port = B53_CPU_PORT;
+ if ((is5325(dev) || is5365(dev)) && port == B53_CPU_PORT_25)
+ port = B53_CPU_PORT;
port_ctrl = PORT_CTRL_RX_BCST_EN |
PORT_CTRL_RX_MCST_EN |
PORT_CTRL_RX_UCST_EN;
- b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(cpu_port), port_ctrl);
+ b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl);
}
static void b53_enable_mib(struct b53_device *dev)
@@ -820,7 +819,7 @@ static int b53_setup(struct dsa_switch *ds)
if (BIT(port) & ds->enabled_port_mask)
b53_enable_port(ds, port, NULL);
else if (dsa_is_cpu_port(ds, port))
- b53_enable_cpu_port(dev);
+ b53_enable_cpu_port(dev, port);
else
b53_disable_port(ds, port, NULL);
}
--
2.9.3
^ permalink raw reply related
* [PATCH net-next v3 03/12] net: dsa: b53: Defer port enabling to calling port_enable
From: Florian Fainelli @ 2017-09-19 17:46 UTC (permalink / raw)
To: netdev; +Cc: davem, andrew, vivien.didelot, Florian Fainelli
In-Reply-To: <20170919174654.2122-1-f.fainelli@gmail.com>
There is no need to configure the enabled ports once in b53_setup() and then a
second time around when dsa_switch_ops::port_enable is called, just do it when
port_enable is called which is better in terms of power consumption and
correctness.
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/b53/b53_common.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index d8bc54cfcfbe..3297af6aab8a 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -815,12 +815,13 @@ static int b53_setup(struct dsa_switch *ds)
if (ret)
dev_err(ds->dev, "failed to apply configuration\n");
+ /* Configure IMP/CPU port, disable unused ports. Enabled
+ * ports will be configured with .port_enable
+ */
for (port = 0; port < dev->num_ports; port++) {
- if (BIT(port) & ds->enabled_port_mask)
- b53_enable_port(ds, port, NULL);
- else if (dsa_is_cpu_port(ds, port))
+ if (dsa_is_cpu_port(ds, port))
b53_enable_cpu_port(dev, port);
- else
+ else if (!(BIT(port) & ds->enabled_port_mask))
b53_disable_port(ds, port, NULL);
}
--
2.9.3
^ permalink raw reply related
* [PATCH net-next v3 04/12] net: dsa: bcm_sf2: Defer port enabling to calling port_enable
From: Florian Fainelli @ 2017-09-19 17:46 UTC (permalink / raw)
To: netdev; +Cc: davem, andrew, vivien.didelot, Florian Fainelli
In-Reply-To: <20170919174654.2122-1-f.fainelli@gmail.com>
There is no need to configure the enabled ports once in bcm_sf2_sw_setup() and
then a second time around when dsa_switch_ops::port_enable is called, just do
it when port_enable is called which is better in terms of power consumption and
correctness.
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/bcm_sf2.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index d7b53d53c116..8acbd17bc1fd 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -890,14 +890,11 @@ static int bcm_sf2_sw_setup(struct dsa_switch *ds)
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
unsigned int port;
- /* Enable all valid ports and disable those unused */
+ /* Disable unused ports and configure IMP port */
for (port = 0; port < priv->hw_params.num_ports; port++) {
- /* IMP port receives special treatment */
- if ((1 << port) & ds->enabled_port_mask)
- bcm_sf2_port_setup(ds, port, NULL);
- else if (dsa_is_cpu_port(ds, port))
+ if (dsa_is_cpu_port(ds, port))
bcm_sf2_imp_setup(ds, port);
- else
+ else if (!((1 << port) & ds->enabled_port_mask))
bcm_sf2_port_disable(ds, port, NULL);
}
--
2.9.3
^ permalink raw reply related
* [PATCH net-next v3 05/12] net: dsa: b53: Use a macro to define I/O operations
From: Florian Fainelli @ 2017-09-19 17:46 UTC (permalink / raw)
To: netdev; +Cc: davem, andrew, vivien.didelot, Florian Fainelli
In-Reply-To: <20170919174654.2122-1-f.fainelli@gmail.com>
Instead of repeating the same pattern: acquire mutex, read/write,
release mutex, define a macro: b53_build_op() which takes the type
(read|write), I/O size, and value (scalar or pointer). This helps with
fixing bugs that could exist (e.g: missing barrier, lock etc.).
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/b53/b53_priv.h | 133 +++++++----------------------------------
1 file changed, 22 insertions(+), 111 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 7528b22aeb03..5bebe97900e8 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -199,119 +199,30 @@ static inline void b53_switch_remove(struct b53_device *dev)
dsa_unregister_switch(dev->ds);
}
-static inline int b53_read8(struct b53_device *dev, u8 page, u8 reg, u8 *val)
-{
- int ret;
-
- mutex_lock(&dev->reg_mutex);
- ret = dev->ops->read8(dev, page, reg, val);
- mutex_unlock(&dev->reg_mutex);
-
- return ret;
-}
-
-static inline int b53_read16(struct b53_device *dev, u8 page, u8 reg, u16 *val)
-{
- int ret;
-
- mutex_lock(&dev->reg_mutex);
- ret = dev->ops->read16(dev, page, reg, val);
- mutex_unlock(&dev->reg_mutex);
-
- return ret;
-}
-
-static inline int b53_read32(struct b53_device *dev, u8 page, u8 reg, u32 *val)
-{
- int ret;
-
- mutex_lock(&dev->reg_mutex);
- ret = dev->ops->read32(dev, page, reg, val);
- mutex_unlock(&dev->reg_mutex);
-
- return ret;
-}
-
-static inline int b53_read48(struct b53_device *dev, u8 page, u8 reg, u64 *val)
-{
- int ret;
-
- mutex_lock(&dev->reg_mutex);
- ret = dev->ops->read48(dev, page, reg, val);
- mutex_unlock(&dev->reg_mutex);
-
- return ret;
+#define b53_build_op(type_op_size, val_type) \
+static inline int b53_##type_op_size(struct b53_device *dev, u8 page, \
+ u8 reg, val_type val) \
+{ \
+ int ret; \
+ \
+ mutex_lock(&dev->reg_mutex); \
+ ret = dev->ops->type_op_size(dev, page, reg, val); \
+ mutex_unlock(&dev->reg_mutex); \
+ \
+ return ret; \
}
-static inline int b53_read64(struct b53_device *dev, u8 page, u8 reg, u64 *val)
-{
- int ret;
-
- mutex_lock(&dev->reg_mutex);
- ret = dev->ops->read64(dev, page, reg, val);
- mutex_unlock(&dev->reg_mutex);
-
- return ret;
-}
-
-static inline int b53_write8(struct b53_device *dev, u8 page, u8 reg, u8 value)
-{
- int ret;
-
- mutex_lock(&dev->reg_mutex);
- ret = dev->ops->write8(dev, page, reg, value);
- mutex_unlock(&dev->reg_mutex);
-
- return ret;
-}
-
-static inline int b53_write16(struct b53_device *dev, u8 page, u8 reg,
- u16 value)
-{
- int ret;
-
- mutex_lock(&dev->reg_mutex);
- ret = dev->ops->write16(dev, page, reg, value);
- mutex_unlock(&dev->reg_mutex);
-
- return ret;
-}
-
-static inline int b53_write32(struct b53_device *dev, u8 page, u8 reg,
- u32 value)
-{
- int ret;
-
- mutex_lock(&dev->reg_mutex);
- ret = dev->ops->write32(dev, page, reg, value);
- mutex_unlock(&dev->reg_mutex);
-
- return ret;
-}
-
-static inline int b53_write48(struct b53_device *dev, u8 page, u8 reg,
- u64 value)
-{
- int ret;
-
- mutex_lock(&dev->reg_mutex);
- ret = dev->ops->write48(dev, page, reg, value);
- mutex_unlock(&dev->reg_mutex);
-
- return ret;
-}
-
-static inline int b53_write64(struct b53_device *dev, u8 page, u8 reg,
- u64 value)
-{
- int ret;
-
- mutex_lock(&dev->reg_mutex);
- ret = dev->ops->write64(dev, page, reg, value);
- mutex_unlock(&dev->reg_mutex);
-
- return ret;
-}
+b53_build_op(read8, u8 *);
+b53_build_op(read16, u16 *);
+b53_build_op(read32, u32 *);
+b53_build_op(read48, u64 *);
+b53_build_op(read64, u64 *);
+
+b53_build_op(write8, u8);
+b53_build_op(write16, u16);
+b53_build_op(write32, u32);
+b53_build_op(write48, u64);
+b53_build_op(write64, u64);
struct b53_arl_entry {
u8 port;
--
2.9.3
^ permalink raw reply related
* [PATCH net-next v3 06/12] net: dsa: b53: Move Broadcom header setup to b53
From: Florian Fainelli @ 2017-09-19 17:46 UTC (permalink / raw)
To: netdev; +Cc: davem, andrew, vivien.didelot, Florian Fainelli
In-Reply-To: <20170919174654.2122-1-f.fainelli@gmail.com>
The code to enable Broadcom tags/headers is largely switch independent,
and in preparation for enabling it for multiple devices with b53, move
the code we have in bcm_sf2.c to b53_common.c
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/b53/b53_common.c | 47 ++++++++++++++++++++++++++++++++++++++++
drivers/net/dsa/b53/b53_priv.h | 1 +
drivers/net/dsa/b53/b53_regs.h | 7 ++++++
drivers/net/dsa/bcm_sf2.c | 43 ++----------------------------------
drivers/net/dsa/bcm_sf2_regs.h | 8 -------
5 files changed, 57 insertions(+), 49 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 3297af6aab8a..aa2187c71ea5 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -538,6 +538,53 @@ static void b53_disable_port(struct dsa_switch *ds, int port,
b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg);
}
+void b53_brcm_hdr_setup(struct dsa_switch *ds, int port)
+{
+ struct b53_device *dev = ds->priv;
+ u8 hdr_ctl, val;
+ u16 reg;
+
+ /* Resolve which bit controls the Broadcom tag */
+ switch (port) {
+ case 8:
+ val = BRCM_HDR_P8_EN;
+ break;
+ case 7:
+ val = BRCM_HDR_P7_EN;
+ break;
+ case 5:
+ val = BRCM_HDR_P5_EN;
+ break;
+ default:
+ val = 0;
+ break;
+ }
+
+ /* Enable Broadcom tags for IMP port */
+ b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl);
+ hdr_ctl |= val;
+ b53_write8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, hdr_ctl);
+
+ /* Registers below are only accessible on newer devices */
+ if (!is58xx(dev))
+ return;
+
+ /* Enable reception Broadcom tag for CPU TX (switch RX) to
+ * allow us to tag outgoing frames
+ */
+ b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, ®);
+ reg &= ~BIT(port);
+ b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, reg);
+
+ /* Enable transmission of Broadcom tags from the switch (CPU RX) to
+ * allow delivering frames to the per-port net_devices
+ */
+ b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, ®);
+ reg &= ~BIT(port);
+ b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, reg);
+}
+EXPORT_SYMBOL(b53_brcm_hdr_setup);
+
static void b53_enable_cpu_port(struct b53_device *dev, int port)
{
u8 port_ctrl;
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 5bebe97900e8..77102f685da0 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -309,5 +309,6 @@ int b53_mirror_add(struct dsa_switch *ds, int port,
struct dsa_mall_mirror_tc_entry *mirror, bool ingress);
void b53_mirror_del(struct dsa_switch *ds, int port,
struct dsa_mall_mirror_tc_entry *mirror);
+void b53_brcm_hdr_setup(struct dsa_switch *ds, int port);
#endif
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index e5c86d44667a..5e8b8e31fee8 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -210,6 +210,7 @@
#define B53_BRCM_HDR 0x03
#define BRCM_HDR_P8_EN BIT(0) /* Enable tagging on port 8 */
#define BRCM_HDR_P5_EN BIT(1) /* Enable tagging on port 5 */
+#define BRCM_HDR_P7_EN BIT(2) /* Enable tagging on port 7 */
/* Mirror capture control register (16 bit) */
#define B53_MIR_CAP_CTL 0x10
@@ -249,6 +250,12 @@
/* Revision ID register (8 bit) */
#define B53_REV_ID 0x40
+/* Broadcom header RX control (16 bit) */
+#define B53_BRCM_HDR_RX_DIS 0x60
+
+/* Broadcom header TX control (16 bit) */
+#define B53_BRCM_HDR_TX_DIS 0x62
+
/*************************************************************************
* ARL Access Page Registers
*************************************************************************/
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 8acbd17bc1fd..49cb51223f70 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -60,45 +60,6 @@ static void bcm_sf2_imp_vlan_setup(struct dsa_switch *ds, int cpu_port)
}
}
-static void bcm_sf2_brcm_hdr_setup(struct bcm_sf2_priv *priv, int port)
-{
- u32 reg, val;
-
- /* Resolve which bit controls the Broadcom tag */
- switch (port) {
- case 8:
- val = BRCM_HDR_EN_P8;
- break;
- case 7:
- val = BRCM_HDR_EN_P7;
- break;
- case 5:
- val = BRCM_HDR_EN_P5;
- break;
- default:
- val = 0;
- break;
- }
-
- /* Enable Broadcom tags for IMP port */
- reg = core_readl(priv, CORE_BRCM_HDR_CTRL);
- reg |= val;
- core_writel(priv, reg, CORE_BRCM_HDR_CTRL);
-
- /* Enable reception Broadcom tag for CPU TX (switch RX) to
- * allow us to tag outgoing frames
- */
- reg = core_readl(priv, CORE_BRCM_HDR_RX_DIS);
- reg &= ~(1 << port);
- core_writel(priv, reg, CORE_BRCM_HDR_RX_DIS);
-
- /* Enable transmission of Broadcom tags from the switch (CPU RX) to
- * allow delivering frames to the per-port net_devices
- */
- reg = core_readl(priv, CORE_BRCM_HDR_TX_DIS);
- reg &= ~(1 << port);
- core_writel(priv, reg, CORE_BRCM_HDR_TX_DIS);
-}
static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
{
@@ -138,7 +99,7 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
reg |= i << (PRT_TO_QID_SHIFT * i);
core_writel(priv, reg, CORE_PORT_TC2_QOS_MAP_PORT(port));
- bcm_sf2_brcm_hdr_setup(priv, port);
+ b53_brcm_hdr_setup(ds, port);
/* Force link status for IMP port */
reg = core_readl(priv, offset);
@@ -247,7 +208,7 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
/* Enable Broadcom tags for that port if requested */
if (priv->brcm_tag_mask & BIT(port))
- bcm_sf2_brcm_hdr_setup(priv, port);
+ b53_brcm_hdr_setup(ds, port);
/* Configure Traffic Class to QoS mapping, allow each priority to map
* to a different queue number
diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
index 49695fcc2ea8..788361ad68a0 100644
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -205,16 +205,8 @@ enum bcm_sf2_reg_offs {
#define CORE_IMP0_PRT_ID 0x0804
-#define CORE_BRCM_HDR_CTRL 0x0080c
-#define BRCM_HDR_EN_P8 (1 << 0)
-#define BRCM_HDR_EN_P5 (1 << 1)
-#define BRCM_HDR_EN_P7 (1 << 2)
-
#define CORE_RST_MIB_CNT_EN 0x0950
-#define CORE_BRCM_HDR_RX_DIS 0x0980
-#define CORE_BRCM_HDR_TX_DIS 0x0988
-
#define CORE_ARLA_VTBL_RWCTRL 0x1600
#define ARLA_VTBL_CMD_WRITE 0
#define ARLA_VTBL_CMD_READ 1
--
2.9.3
^ permalink raw reply related
* [PATCH net-next v3 07/12] net: dsa: b53: Define EEE register page
From: Florian Fainelli @ 2017-09-19 17:46 UTC (permalink / raw)
To: netdev; +Cc: davem, andrew, vivien.didelot, Florian Fainelli
In-Reply-To: <20170919174654.2122-1-f.fainelli@gmail.com>
In preparation for migrating the EEE code from bcm_sf2 to b53, define the full
EEE register page and offsets within that page.
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/b53/b53_regs.h | 41 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h
index 5e8b8e31fee8..2a9f421680aa 100644
--- a/drivers/net/dsa/b53/b53_regs.h
+++ b/drivers/net/dsa/b53/b53_regs.h
@@ -50,6 +50,9 @@
/* Jumbo Frame Registers */
#define B53_JUMBO_PAGE 0x40
+/* EEE Control Registers Page */
+#define B53_EEE_PAGE 0x92
+
/* CFP Configuration Registers Page */
#define B53_CFP_PAGE 0xa1
@@ -472,6 +475,44 @@
#define JMS_MAX_SIZE 9724
/*************************************************************************
+ * EEE Configuration Page Registers
+ *************************************************************************/
+
+/* EEE Enable control register (16 bit) */
+#define B53_EEE_EN_CTRL 0x00
+
+/* EEE LPI assert status register (16 bit) */
+#define B53_EEE_LPI_ASSERT_STS 0x02
+
+/* EEE LPI indicate status register (16 bit) */
+#define B53_EEE_LPI_INDICATE 0x4
+
+/* EEE Receiving idle symbols status register (16 bit) */
+#define B53_EEE_RX_IDLE_SYM_STS 0x6
+
+/* EEE Pipeline timer register (32 bit) */
+#define B53_EEE_PIP_TIMER 0xC
+
+/* EEE Sleep timer Gig register (32 bit) */
+#define B53_EEE_SLEEP_TIMER_GIG(i) (0x10 + 4 * (i))
+
+/* EEE Sleep timer FE register (32 bit) */
+#define B53_EEE_SLEEP_TIMER_FE(i) (0x34 + 4 * (i))
+
+/* EEE Minimum LP timer Gig register (32 bit) */
+#define B53_EEE_MIN_LP_TIMER_GIG(i) (0x58 + 4 * (i))
+
+/* EEE Minimum LP timer FE register (32 bit) */
+#define B53_EEE_MIN_LP_TIMER_FE(i) (0x7c + 4 * (i))
+
+/* EEE Wake timer Gig register (16 bit) */
+#define B53_EEE_WAKE_TIMER_GIG(i) (0xa0 + 2 * (i))
+
+/* EEE Wake timer FE register (16 bit) */
+#define B53_EEE_WAKE_TIMER_FE(i) (0xb2 + 2 * (i))
+
+
+/*************************************************************************
* CFP Configuration Page Registers
*************************************************************************/
--
2.9.3
^ permalink raw reply related
* [PATCH net-next v3 08/12] net: dsa: b53: Move EEE functions to b53
From: Florian Fainelli @ 2017-09-19 17:46 UTC (permalink / raw)
To: netdev; +Cc: davem, andrew, vivien.didelot, Florian Fainelli
In-Reply-To: <20170919174654.2122-1-f.fainelli@gmail.com>
Move the bcm_sf2 EEE-related functions to the b53 driver because this is shared
code amongst Gigabit capable switch, only 5325 and 5365 are too old to support
that.
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/net/dsa/b53/b53_common.c | 63 ++++++++++++++++++++++++++++++++++++++
drivers/net/dsa/b53/b53_priv.h | 5 +++
drivers/net/dsa/bcm_sf2.c | 66 ++++------------------------------------
drivers/net/dsa/bcm_sf2.h | 2 --
drivers/net/dsa/bcm_sf2_regs.h | 3 --
5 files changed, 74 insertions(+), 65 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index aa2187c71ea5..491e4ffa8a0e 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1531,6 +1531,69 @@ void b53_mirror_del(struct dsa_switch *ds, int port,
}
EXPORT_SYMBOL(b53_mirror_del);
+void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
+{
+ struct b53_device *dev = ds->priv;
+ u16 reg;
+
+ b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, ®);
+ if (enable)
+ reg |= BIT(port);
+ else
+ reg &= ~BIT(port);
+ b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg);
+}
+EXPORT_SYMBOL(b53_eee_enable_set);
+
+
+/* Returns 0 if EEE was not enabled, or 1 otherwise
+ */
+int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy)
+{
+ int ret;
+
+ ret = phy_init_eee(phy, 0);
+ if (ret)
+ return 0;
+
+ b53_eee_enable_set(ds, port, true);
+
+ return 1;
+}
+EXPORT_SYMBOL(b53_eee_init);
+
+int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
+{
+ struct b53_device *dev = ds->priv;
+ struct ethtool_eee *p = &dev->ports[port].eee;
+ u16 reg;
+
+ if (is5325(dev) || is5365(dev))
+ return -EOPNOTSUPP;
+
+ b53_read16(dev, B53_EEE_PAGE, B53_EEE_LPI_INDICATE, ®);
+ e->eee_enabled = p->eee_enabled;
+ e->eee_active = !!(reg & BIT(port));
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_get_mac_eee);
+
+int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
+{
+ struct b53_device *dev = ds->priv;
+ struct ethtool_eee *p = &dev->ports[port].eee;
+
+ if (is5325(dev) || is5365(dev))
+ return -EOPNOTSUPP;
+
+ p->eee_enabled = e->eee_enabled;
+ b53_eee_enable_set(ds, port, e->eee_enabled);
+
+ return 0;
+}
+EXPORT_SYMBOL(b53_set_mac_eee);
+
static const struct dsa_switch_ops b53_switch_ops = {
.get_tag_protocol = b53_get_tag_protocol,
.setup = b53_setup,
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 77102f685da0..aabe80eab25d 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -70,6 +70,7 @@ enum {
struct b53_port {
u16 vlan_ctl_mask;
+ struct ethtool_eee eee;
};
struct b53_vlan {
@@ -310,5 +311,9 @@ int b53_mirror_add(struct dsa_switch *ds, int port,
void b53_mirror_del(struct dsa_switch *ds, int port,
struct dsa_mall_mirror_tc_entry *mirror);
void b53_brcm_hdr_setup(struct dsa_switch *ds, int port);
+void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable);
+int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy);
+int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e);
+int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e);
#endif
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 49cb51223f70..4e8ef4c07eab 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -107,19 +107,6 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
core_writel(priv, reg, offset);
}
-static void bcm_sf2_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
-{
- struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
- u32 reg;
-
- reg = core_readl(priv, CORE_EEE_EN_CTRL);
- if (enable)
- reg |= 1 << port;
- else
- reg &= ~(1 << port);
- core_writel(priv, reg, CORE_EEE_EN_CTRL);
-}
-
static void bcm_sf2_gphy_enable_set(struct dsa_switch *ds, bool enable)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
@@ -256,8 +243,8 @@ static int bcm_sf2_port_setup(struct dsa_switch *ds, int port,
bcm_sf2_imp_vlan_setup(ds, cpu_port);
/* If EEE was enabled, restore it */
- if (priv->port_sts[port].eee.eee_enabled)
- bcm_sf2_eee_enable_set(ds, port, true);
+ if (priv->dev->ports[port].eee.eee_enabled)
+ b53_eee_enable_set(ds, port, true);
return 0;
}
@@ -292,47 +279,6 @@ static void bcm_sf2_port_disable(struct dsa_switch *ds, int port,
core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
}
-/* Returns 0 if EEE was not enabled, or 1 otherwise
- */
-static int bcm_sf2_eee_init(struct dsa_switch *ds, int port,
- struct phy_device *phy)
-{
- int ret;
-
- ret = phy_init_eee(phy, 0);
- if (ret)
- return 0;
-
- bcm_sf2_eee_enable_set(ds, port, true);
-
- return 1;
-}
-
-static int bcm_sf2_sw_get_mac_eee(struct dsa_switch *ds, int port,
- struct ethtool_eee *e)
-{
- struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
- struct ethtool_eee *p = &priv->port_sts[port].eee;
- u32 reg;
-
- reg = core_readl(priv, CORE_EEE_LPI_INDICATE);
- e->eee_enabled = p->eee_enabled;
- e->eee_active = !!(reg & (1 << port));
-
- return 0;
-}
-
-static int bcm_sf2_sw_set_mac_eee(struct dsa_switch *ds, int port,
- struct ethtool_eee *e)
-{
- struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
- struct ethtool_eee *p = &priv->port_sts[port].eee;
-
- p->eee_enabled = e->eee_enabled;
- bcm_sf2_eee_enable_set(ds, port, e->eee_enabled);
-
- return 0;
-}
static int bcm_sf2_sw_indir_rw(struct bcm_sf2_priv *priv, int op, int addr,
int regnum, u16 val)
@@ -567,7 +513,7 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
struct phy_device *phydev)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
- struct ethtool_eee *p = &priv->port_sts[port].eee;
+ struct ethtool_eee *p = &priv->dev->ports[port].eee;
u32 id_mode_dis = 0, port_mode;
const char *str = NULL;
u32 reg, offset;
@@ -649,7 +595,7 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
core_writel(priv, reg, offset);
if (!phydev->is_pseudo_fixed_link)
- p->eee_enabled = bcm_sf2_eee_init(ds, port, phydev);
+ p->eee_enabled = b53_eee_init(ds, port, phydev);
}
static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
@@ -978,8 +924,8 @@ static const struct dsa_switch_ops bcm_sf2_ops = {
.set_wol = bcm_sf2_sw_set_wol,
.port_enable = bcm_sf2_port_setup,
.port_disable = bcm_sf2_port_disable,
- .get_mac_eee = bcm_sf2_sw_get_mac_eee,
- .set_mac_eee = bcm_sf2_sw_set_mac_eee,
+ .get_mac_eee = b53_get_mac_eee,
+ .set_mac_eee = b53_set_mac_eee,
.port_bridge_join = b53_br_join,
.port_bridge_leave = b53_br_leave,
.port_stp_state_set = b53_br_set_stp_state,
diff --git a/drivers/net/dsa/bcm_sf2.h b/drivers/net/dsa/bcm_sf2.h
index 02c499f9c56b..1922e027ff59 100644
--- a/drivers/net/dsa/bcm_sf2.h
+++ b/drivers/net/dsa/bcm_sf2.h
@@ -48,8 +48,6 @@ struct bcm_sf2_hw_params {
struct bcm_sf2_port_status {
unsigned int link;
-
- struct ethtool_eee eee;
};
struct bcm_sf2_cfp_priv {
diff --git a/drivers/net/dsa/bcm_sf2_regs.h b/drivers/net/dsa/bcm_sf2_regs.h
index 788361ad68a0..d8b8074a47b9 100644
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -244,9 +244,6 @@ enum bcm_sf2_reg_offs {
#define CORE_JOIN_ALL_VLAN_EN 0xd140
-#define CORE_EEE_EN_CTRL 0x24800
-#define CORE_EEE_LPI_INDICATE 0x24810
-
#define CORE_CFP_ACC 0x28000
#define OP_STR_DONE (1 << 0)
#define OP_SEL_SHIFT 1
--
2.9.3
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox