* Re: non-blocking connect for kernel SCTP sockets
From: Marcelo Ricardo Leitner @ 2018-05-02 13:36 UTC (permalink / raw)
To: Michal Kubecek
Cc: Xin Long, network dev, linux-sctp, LKML, Vlad Yasevich,
Neil Horman, Gang He, GuoQing Jiang
In-Reply-To: <20180502123227.x7yucbi4lejj55o5@unicorn.suse.cz>
On Wed, May 02, 2018 at 02:32:28PM +0200, Michal Kubecek wrote:
> On Wed, May 02, 2018 at 05:46:23PM +0800, Xin Long wrote:
...
> > It is a bug, https://bugzilla.redhat.com/show_bug.cgi?id=1251530
>
> Not authorized. :-)
Oups! I just made it public.
Marcelo
^ permalink raw reply
* Re: kvmalloc: always use vmalloc if CONFIG_DEBUG_VM
From: Mike Snitzer @ 2018-05-02 13:33 UTC (permalink / raw)
To: Andrew Morton
Cc: Mikulas Patocka, dm-devel, eric.dumazet, mst, netdev, jasowang,
linux-kernel, Matthew Wilcox, Michal Hocko, linux-mm, edumazet,
Babka, virtualization, David Miller
In-Reply-To: <20180501173626.4593a87d0d64f6cc9d219d20@linux-foundation.org>
On Tue, May 01 2018 at 8:36pm -0400,
Andrew Morton <akpm@linux-foundation.org> wrote:
> On Tue, 24 Apr 2018 12:33:01 -0400 (EDT) Mikulas Patocka <mpatocka@redhat.com> wrote:
>
> >
> >
> > On Tue, 24 Apr 2018, Michal Hocko wrote:
> >
> > > On Tue 24-04-18 11:30:40, Mikulas Patocka wrote:
> > > >
> > > >
> > > > On Tue, 24 Apr 2018, Michal Hocko wrote:
> > > >
> > > > > On Mon 23-04-18 20:25:15, Mikulas Patocka wrote:
> > > > >
> > > > > > Fixing __vmalloc code
> > > > > > is easy and it doesn't require cooperation with maintainers.
> > > > >
> > > > > But it is a hack against the intention of the scope api.
> > > >
> > > > It is not!
> > >
> > > This discussion simply doesn't make much sense it seems. The scope API
> > > is to document the scope of the reclaim recursion critical section. That
> > > certainly is not a utility function like vmalloc.
> >
> > That 15-line __vmalloc bugfix doesn't prevent you (or any other kernel
> > developer) from converting the code to the scope API. You make nonsensical
> > excuses.
> >
>
> Fun thread!
>
> Winding back to the original problem, I'd state it as
>
> - Caller uses kvmalloc() but passes the address into vmalloc-naive
> DMA API and
>
> - Caller uses kvmalloc() but passes the address into kfree()
>
> Yes?
I think so.
> If so, then...
>
> Is there a way in which, in the kvmalloc-called-kmalloc path, we can
> tag the slab-allocated memory with a "this memory was allocated with
> kvmalloc()" flag? I *think* there's extra per-object storage available
> with suitable slab/slub debugging options? Perhaps we could steal one
> bit from the redzone, dunno.
>
> If so then we can
>
> a) set that flag in kvmalloc() if the kmalloc() call succeeded
>
> b) check for that flag in the DMA code, WARN if it is set.
>
> c) in kvfree(), clear that flag before calling kfree()
>
> d) in kfree(), check for that flag and go WARN() if set.
>
> So both potential bugs are detected all the time, dependent upon
> CONFIG_SLUB_DEBUG (and perhaps other slub config options).
Thanks Andrew, definitely the most sane proposal I've seen to resolve
this.
^ permalink raw reply
* Re: [PATCH] net/mlx4_core: Fix error handling in mlx4_init_port_info.
From: Tariq Toukan @ 2018-05-02 13:31 UTC (permalink / raw)
To: Tarick Bedeir, tariqt, gthelen, netdev, linux-rdma, linux-kernel
In-Reply-To: <20180427152015.185861-1-tarick@google.com>
On 27/04/2018 6:20 PM, Tarick Bedeir wrote:
> Avoid exiting the function with a lingering sysfs file (if the first
> call to device_create_file() fails while the second succeeds), and avoid
> calling devlink_port_unregister() twice.
>
> In other words, either mlx4_init_port_info() succeeds and returns zero, or
> it fails, returns non-zero, and requires no cleanup.
>
> Signed-off-by: Tarick Bedeir <tarick@google.com>
> ---
> drivers/net/ethernet/mellanox/mlx4/main.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
> index 4d84cab77105..e8a3a45d0b53 100644
> --- a/drivers/net/ethernet/mellanox/mlx4/main.c
> +++ b/drivers/net/ethernet/mellanox/mlx4/main.c
> @@ -3007,6 +3007,7 @@ static int mlx4_init_port_info(struct mlx4_dev *dev, int port)
> mlx4_err(dev, "Failed to create file for port %d\n", port);
> devlink_port_unregister(&info->devlink_port);
> info->port = -1;
> + return err;
> }
>
> sprintf(info->dev_mtu_name, "mlx4_port%d_mtu", port);
> @@ -3028,9 +3029,10 @@ static int mlx4_init_port_info(struct mlx4_dev *dev, int port)
> &info->port_attr);
> devlink_port_unregister(&info->devlink_port);
> info->port = -1;
> + return err;
> }
>
> - return err;
> + return 0;
> }
>
> static void mlx4_cleanup_port_info(struct mlx4_port_info *info)
>
Acked-by: Tariq Toukan <tariqt@mellanox.com>
Thanks Tarick.
^ permalink raw reply
* Re: [PATCH net-next] net: phy: broadcom: add support for BCM89610 PHY
From: Andrew Lunn @ 2018-05-02 13:29 UTC (permalink / raw)
To: Bhadram Varka; +Cc: f.fainelli, davem, netdev
In-Reply-To: <1525256676-24335-1-git-send-email-vbhadram@nvidia.com>
On Wed, May 02, 2018 at 03:54:36PM +0530, Bhadram Varka wrote:
> It adds support for BCM89610 (Single-Port 10/100/1000BASE-T)
> transceiver which is used in P3310 Tegra186 platform.
>
> Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
> ---
> drivers/net/phy/broadcom.c | 11 +++++++++++
> include/linux/brcmphy.h | 1 +
> 2 files changed, 12 insertions(+)
>
> diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
> index 3bb6b66..1e4b6c2 100644
> --- a/drivers/net/phy/broadcom.c
> +++ b/drivers/net/phy/broadcom.c
> @@ -720,6 +720,16 @@ static struct phy_driver broadcom_drivers[] = {
> .get_strings = bcm_phy_get_strings,
> .get_stats = bcm53xx_phy_get_stats,
> .probe = bcm53xx_phy_probe,
> +}, {
> + .phy_id = PHY_ID_BCM89610,
> + .phy_id_mask = 0xfffffff0,
> + .name = "Broadcom BCM89610",
> + .features = PHY_GBIT_FEATURES |
> + SUPPORTED_Pause | SUPPORTED_Asym_Pause,
Hi Bhadram
Why do you have SUPPORTED_Pause | SUPPORTED_Asym_Pause. No other PHY
does.
Take a look at Documentation/networking/phy.txt
Andrew
^ permalink raw reply
* Re: [PATCH V2 net-next 5/6] macvlan/macvtap: Add support for SCTP checksum offload.
From: Vlad Yasevich @ 2018-05-02 13:27 UTC (permalink / raw)
To: Michael S. Tsirkin, Vladislav Yasevich
Cc: netdev, linux-sctp, virtualization, virtio-dev, jasowang, nhorman,
marcelo.leitner
In-Reply-To: <20180502062400-mutt-send-email-mst@kernel.org>
On 05/01/2018 11:24 PM, Michael S. Tsirkin wrote:
> On Tue, May 01, 2018 at 10:07:38PM -0400, Vladislav Yasevich wrote:
>> Since we now have support for software CRC32c offload, turn it on
>> for macvlan and macvtap devices so that guests can take advantage
>> of offload SCTP checksums to the host or host hardware.
>>
>> Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
>> ---
>> drivers/net/macvlan.c | 5 +++--
>> drivers/net/tap.c | 8 +++++---
>> 2 files changed, 8 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
>> index 725f4b4..646b730 100644
>> --- a/drivers/net/macvlan.c
>> +++ b/drivers/net/macvlan.c
>> @@ -834,7 +834,7 @@ static struct lock_class_key macvlan_netdev_addr_lock_key;
>>
>> #define ALWAYS_ON_OFFLOADS \
>> (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_GSO_SOFTWARE | \
>> - NETIF_F_GSO_ROBUST | NETIF_F_GSO_ENCAP_ALL)
>> + NETIF_F_GSO_ROBUST | NETIF_F_GSO_ENCAP_ALL | NETIF_F_SCTP_CRC)
>>
>> #define ALWAYS_ON_FEATURES (ALWAYS_ON_OFFLOADS | NETIF_F_LLTX)
>>
>> @@ -842,7 +842,8 @@ static struct lock_class_key macvlan_netdev_addr_lock_key;
>> (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA | NETIF_F_FRAGLIST | \
>> NETIF_F_GSO | NETIF_F_TSO | NETIF_F_LRO | \
>> NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_GRO | NETIF_F_RXCSUM | \
>> - NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_VLAN_STAG_FILTER)
>> + NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_VLAN_STAG_FILTER | \
>> + NETIF_F_SCTP_CRC)
>>
>> #define MACVLAN_STATE_MASK \
>> ((1<<__LINK_STATE_NOCARRIER) | (1<<__LINK_STATE_DORMANT))
>> diff --git a/drivers/net/tap.c b/drivers/net/tap.c
>> index 9b6cb78..2c8512b 100644
>> --- a/drivers/net/tap.c
>> +++ b/drivers/net/tap.c
>> @@ -369,8 +369,7 @@ rx_handler_result_t tap_handle_frame(struct sk_buff **pskb)
>> * check, we either support them all or none.
>> */
>> if (skb->ip_summed == CHECKSUM_PARTIAL &&
>> - !(features & NETIF_F_CSUM_MASK) &&
>> - skb_checksum_help(skb))
>> + skb_csum_hwoffload_help(skb, features))
>> goto drop;
>> if (ptr_ring_produce(&q->ring, skb))
>> goto drop;
>> @@ -945,6 +944,9 @@ static int set_offload(struct tap_queue *q, unsigned long arg)
>> }
>> }
>>
>> + if (arg & TUN_F_SCTP_CSUM)
>> + feature_mask |= NETIF_F_SCTP_CRC;
>> +
>
> so this still affects TX, shouldn't this affect RX instead?
There is no bit to set on the RX path just like there is no bit to set on the RX patch
for TUN_F_CSUM.
We only invert TSO offloads, not checksum offloads as the comment below states.
For checksum, macvtap has to compute the checksum itself in tap_handle_frame() above.
It uses tx feature bits to see if needs do to the checksum.
If you think we need another flag to macvtap to control RXCSUM, that would need to be
separate and cover standard TCP checksum as well.
-vlad
>
>
>> /* tun/tap driver inverts the usage for TSO offloads, where
>> * setting the TSO bit means that the userspace wants to
>> * accept TSO frames and turning it off means that user space
>> @@ -1077,7 +1079,7 @@ static long tap_ioctl(struct file *file, unsigned int cmd,
>> case TUNSETOFFLOAD:
>> /* let the user check for future flags */
>> if (arg & ~(TUN_F_CSUM | TUN_F_TSO4 | TUN_F_TSO6 |
>> - TUN_F_TSO_ECN | TUN_F_UFO))
>> + TUN_F_TSO_ECN | TUN_F_UFO | TUN_F_SCTP_CSUM))
>> return -EINVAL;
>>
>> rtnl_lock();
>> --
>> 2.9.5
^ permalink raw reply
* [PATCH bpf-next v2] bpf: relax constraints on formatting for eBPF helper documentation
From: Quentin Monnet @ 2018-05-02 13:20 UTC (permalink / raw)
To: daniel, ast; +Cc: dsahern, yhs, ecree, netdev, oss-drivers, quentin.monnet
The Python script used to parse and extract eBPF helpers documentation
from include/uapi/linux/bpf.h expects a very specific formatting for the
descriptions (single dot represents a space, '>' stands for a tab):
/*
...
*.int bpf_helper(list of arguments)
*.> Description
*.> > Start of description
*.> > Another line of description
*.> > And yet another line of description
*.> Return
*.> > 0 on success, or a negative error in case of failure
...
*/
This is too strict, and painful for developers who wants to add
documentation for new helpers. Worse, it is extremely difficult to check
that the formatting is correct during reviews. Change the format
expected by the script and make it more flexible. The script now works
whether or not the initial space (right after the star) is present, and
accepts both tabs and white spaces (or a combination of both) for
indenting description sections and contents.
Concretely, something like the following would now be supported:
/*
...
*int bpf_helper(list of arguments)
*......Description
*.> > Start of description...
*> > Another line of description
*..............And yet another line of description
*> Return
*.> ........0 on success, or a negative error in case of failure
...
*/
While at it, remove unnecessary carets from each regex used with match()
in the script. They are redundant, as match() tries to match from the
beginning of the string by default.
v2: Remove unnecessary caret when a regex is used with match().
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
---
scripts/bpf_helpers_doc.py | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/scripts/bpf_helpers_doc.py b/scripts/bpf_helpers_doc.py
index 30ba0fee36e4..8f59897fbda1 100755
--- a/scripts/bpf_helpers_doc.py
+++ b/scripts/bpf_helpers_doc.py
@@ -39,9 +39,9 @@ class Helper(object):
Break down helper function protocol into smaller chunks: return type,
name, distincts arguments.
"""
- arg_re = re.compile('^((const )?(struct )?(\w+|...))( (\**)(\w+))?$')
+ arg_re = re.compile('((const )?(struct )?(\w+|...))( (\**)(\w+))?$')
res = {}
- proto_re = re.compile('^(.+) (\**)(\w+)\(((([^,]+)(, )?){1,5})\)$')
+ proto_re = re.compile('(.+) (\**)(\w+)\(((([^,]+)(, )?){1,5})\)$')
capture = proto_re.match(self.proto)
res['ret_type'] = capture.group(1)
@@ -87,7 +87,7 @@ class HeaderParser(object):
# - Same as above, with "const" and/or "struct" in front of type
# - "..." (undefined number of arguments, for bpf_trace_printk())
# There is at least one term ("void"), and at most five arguments.
- p = re.compile('^ \* ((.+) \**\w+\((((const )?(struct )?(\w+|\.\.\.)( \**\w+)?)(, )?){1,5}\))$')
+ p = re.compile(' \* ?((.+) \**\w+\((((const )?(struct )?(\w+|\.\.\.)( \**\w+)?)(, )?){1,5}\))$')
capture = p.match(self.line)
if not capture:
raise NoHelperFound
@@ -95,7 +95,7 @@ class HeaderParser(object):
return capture.group(1)
def parse_desc(self):
- p = re.compile('^ \* \tDescription$')
+ p = re.compile(' \* ?(?:\t| {6,8})Description$')
capture = p.match(self.line)
if not capture:
# Helper can have empty description and we might be parsing another
@@ -109,7 +109,7 @@ class HeaderParser(object):
if self.line == ' *\n':
desc += '\n'
else:
- p = re.compile('^ \* \t\t(.*)')
+ p = re.compile(' \* ?(?:\t| {6,8})(?:\t| {8})(.*)')
capture = p.match(self.line)
if capture:
desc += capture.group(1) + '\n'
@@ -118,7 +118,7 @@ class HeaderParser(object):
return desc
def parse_ret(self):
- p = re.compile('^ \* \tReturn$')
+ p = re.compile(' \* ?(?:\t| {6,8})Return$')
capture = p.match(self.line)
if not capture:
# Helper can have empty retval and we might be parsing another
@@ -132,7 +132,7 @@ class HeaderParser(object):
if self.line == ' *\n':
ret += '\n'
else:
- p = re.compile('^ \* \t\t(.*)')
+ p = re.compile(' \* ?(?:\t| {6,8})(?:\t| {8})(.*)')
capture = p.match(self.line)
if capture:
ret += capture.group(1) + '\n'
--
2.14.1
^ permalink raw reply related
* [dn_getsockopt] kernel BUG at mm/usercopy.c:100!
From: Fengguang Wu @ 2018-05-02 12:52 UTC (permalink / raw)
To: netdev
Cc: David S. Miller, Linus Torvalds, linux-decnet-user, linux-kernel,
lkp
[-- Attachment #1: Type: text/plain, Size: 3751 bytes --]
Hello,
FYI this happens in mainline kernel 4.17.0-rc3.
It dates back to at least v4.16 .
[ 84.345323] raw_sendmsg: trinity-c2 forgot to set AF_INET. Fix it!
[ 85.485647] synth uevent: /devices/virtual/misc/fuse: unknown uevent action string
[ 85.486293] misc fuse: uevent: failed to send synthetic uevent
[ 86.373915] usercopy: Kernel memory exposure attempt detected from SLAB object 'NSP' (offset 1144, size 20)!
[ 86.374651] ------------[ cut here ]------------
[ 86.374983] kernel BUG at mm/usercopy.c:100!
[ 86.375405] invalid opcode: 0000 [#1] SMP
[ 86.375700] CPU: 0 PID: 853 Comm: trinity-c1 Not tainted 4.17.0-rc3 #217
[ 86.376178] RIP: 0010:usercopy_abort+0x77/0x80:
usercopy_abort at mm/usercopy.c:88 (discriminator 12)
[ 86.376493] RSP: 0018:ffffc9000085fdf8 EFLAGS: 00010282
[ 86.376867] RAX: 0000000000000060 RBX: 0000000000000014 RCX: 0000000000000000
[ 86.377367] RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000246
[ 86.377871] RBP: ffffc9000085fe18 R08: 0000000000000001 R09: 0000000000000000
[ 86.378371] R10: ffffffff830ebd0a R11: 00000000000003c9 R12: 0000000000000001
[ 86.378876] R13: 0000000000000014 R14: ffff88001b2884cc R15: 0000000000000014
[ 86.379378] FS: 000000000104a880(0000) GS:ffff88001f800000(0000) knlGS:0000000000000000
[ 86.379948] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 86.380353] CR2: 000000003a3a3a3b CR3: 000000001b1a7005 CR4: 00000000001606b0
[ 86.380859] DR0: 00007f39dd868000 DR1: 00007f39dd868000 DR2: 0000000000000000
[ 86.381360] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
[ 86.381868] Call Trace:
[ 86.382050] __check_heap_object+0xb3/0xc0:
__check_heap_object at mm/slab.c:4445
[ 86.382344] __check_object_size+0xee/0x1d0:
__check_object_size at mm/usercopy.c:262
[ 86.382649] ? __might_sleep+0x68/0x70:
__might_sleep at kernel/sched/core.c:6142 (discriminator 14)
[ 86.382921] dn_getsockopt+0x201/0x300:
copy_to_user at include/linux/uaccess.h:155
(inlined by) __dn_getsockopt at net/decnet/af_decnet.c:1638
(inlined by) dn_getsockopt at net/decnet/af_decnet.c:1516
[ 86.383191] __sys_getsockopt+0x85/0xc0:
__sys_getsockopt at net/socket.c:1939
[ 86.383466] __x64_sys_getsockopt+0x1f/0x30:
__do_sys_getsockopt at net/socket.c:1951
(inlined by) __se_sys_getsockopt at net/socket.c:1948
(inlined by) __x64_sys_getsockopt at net/socket.c:1948
[ 86.383769] do_syscall_64+0x98/0x160:
do_syscall_64 at arch/x86/entry/common.c:287
[ 86.384038] entry_SYSCALL_64_after_hwframe+0x44/0xa9:
entry_SYSCALL_64_after_hwframe at arch/x86/entry/entry_64.S:247
[ 86.384396] RIP: 0033:0x457389
[ 86.384620] RSP: 002b:00007ffcd8e0fb88 EFLAGS: 00000246 ORIG_RAX: 0000000000000037
[ 86.385151] RAX: ffffffffffffffda RBX: 0000000000000037 RCX: 0000000000457389
[ 86.385654] RDX: 0000000000000001 RSI: 0000000042000000 RDI: 0000000000000189
[ 86.386153] RBP: 00007ffcd8e0fc30 R08: 0000000000000061 R09: 0000000076767676
[ 86.386675] R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000002
[ 86.387176] R13: 00007f8cd5a68058 R14: 000000000104a830 R15: 00007f8cd5a68000
[ 86.387682] Code: 0f 44 d0 53 48 c7 c0 8f a3 0a 83 51 48 c7 c6 85 a3 0a 83 41 53 48 89 f9 48 0f 45 f0 4c 89 d2 48 c7 c7 70 a4 0a 83 e8 7d 6e f0 ff <0f> 0b 0f 1f 80 00 00 00 00 48 85 f6 0f 84 b7 01 00 00 55 48 89
[ 86.389031] RIP: usercopy_abort+0x77/0x80:
usercopy_abort at mm/usercopy.c:88 (discriminator 12) RSP: ffffc9000085fdf8
[ 86.389481] ---[ end trace 5103f13a815fc1bf ]---
[ 86.389818] Kernel panic - not syncing: Fatal exception
Attached the full dmesg, kconfig and reproduce scripts.
Thanks,
Fengguang
[-- Attachment #2: dmesg-yocto-lkp-hsw01-105:20180501235610:x86_64-randconfig-s3-05012323:4.17.0-rc3:217 --]
[-- Type: text/plain, Size: 55074 bytes --]
early console in setup code
Probing EDD (edd=off to disable)... ok
[ 0.000000] Linux version 4.17.0-rc3 (kbuild@lkp-hsx03) (gcc version 7.3.0 (Debian 7.3.0-16)) #217 SMP Tue May 1 23:30:24 CST 2018
[ 0.000000] Command line: root=/dev/ram0 hung_task_panic=1 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-s3-05012323/linux-devel:devel-hourly-2018050117:6da6c0db5316275015e8cc2959f12a17584aeb64/.vmlinuz-6da6c0db5316275015e8cc2959f12a17584aeb64-20180501235330-11:yocto-lkp-hsw01-105 branch=linux-devel/devel-hourly-2018050117 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s3-05012323/gcc-7/6da6c0db5316275015e8cc2959f12a17584aeb64/vmlinuz-4.17.0-rc3 drbd.minor_count=8 rcupe
rf.shutdown=0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Centaur CentaurHauls
[ 0.000000] CPU: vendor_id 'GenuineIntel' unknown, using generic init.
[ 0.000000] CPU: Your system may be unstable.
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffdbfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001ffdc000-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[ 0.000000] debug: ignoring loglevel setting.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] Hypervisor detected: KVM
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1ffdc max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0080000000 mask FF80000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[ 0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[ 0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[ 0.000000] found SMP MP-table at [mem 0x000f6a90-0x000f6a9f] mapped at [ (ptrval)]
[ 0.000000] mpc: f6aa0-f6b80
[ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576
[ 0.000000] BRK [0x04bd9000, 0x04bd9fff] PGTABLE
[ 0.000000] BRK [0x04bda000, 0x04bdafff] PGTABLE
[ 0.000000] BRK [0x04bdb000, 0x04bdbfff] PGTABLE
[ 0.000000] BRK [0x04bdc000, 0x04bdcfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1fbf9000-0x1ffcffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F68C0 000014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 0x000000001FFE15CE 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACP 0x000000001FFE142A 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
[ 0.000000] ACPI: DSDT 0x000000001FFE0040 0013EA (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
[ 0.000000] ACPI: FACS 0x000000001FFE0000 000040
[ 0.000000] ACPI: APIC 0x000000001FFE151E 000078 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
[ 0.000000] ACPI: HPET 0x000000001FFE1596 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] mapped APIC to ffffffffff5fd000 ( fee00000)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ffdbfff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1ffd8000-0x1ffdbfff]
[ 0.000000] kvm-clock: cpu 0, msr 0:1ffd6001, primary cpu clock
[ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[ 0.000000] kvm-clock: using sched offset of 1423193386 cycles
[ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000001ffdbfff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001ffdbfff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffdbfff]
[ 0.000000] On node 0 totalpages: 130938
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1984 pages used for memmap
[ 0.000000] DMA32 zone: 126940 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] ACPI: PM-Timer IO Port: 0x608
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[ 0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x9b/0x5c5 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] percpu: Embedded 37 pages/cpu @ (ptrval) s121096 r0 d30456 u2097152
[ 0.000000] pcpu-alloc: s121096 r0 d30456 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] KVM setup async PF for cpu 0
[ 0.000000] kvm-stealtime: cpu 0, msr 1f810840
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 128869
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/ram0 hung_task_panic=1 debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw link=/kbuild-tests/run-queue/kvm/x86_64-randconfig-s3-05012323/linux-devel:devel-hourly-2018050117:6da6c0db5316275015e8cc2959f12a17584aeb64/.vmlinuz-6da6c0db5316275015e8cc2959f12a17584aeb64-20180501235330-11:yocto-lkp-hsw01-105 branch=linux-devel/devel-hourly-2018050117 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s3-05012323/gcc-7/6da6c0db5316275015e8cc2959f12a17584aeb64/vmlinuz-4.17.0-rc3 drbd.minor_count=
8 rcuperf.shutdown=0
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 200360K/523752K available (24588K kernel code, 2547K rwdata, 8800K rodata, 1192K init, 20428K bss, 73748K reserved, 0K cma-reserved)
[ 0.004000] Hierarchical RCU implementation.
[ 0.004000] RCU event tracing is enabled.
[ 0.004000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
[ 0.004000] RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout).
[ 0.004000] Tasks RCU enabled.
[ 0.004000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.004000] NR_IRQS: 4352, nr_irqs: 256, preallocated irqs: 16
[ 0.004000] Offload RCU callbacks from CPUs: (none).
[ 0.004000] console [ttyS0] enabled
[ 0.004000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.004000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.004000] ... MAX_LOCK_DEPTH: 48
[ 0.004000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.004000] ... CLASSHASH_SIZE: 4096
[ 0.004000] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.004000] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.004000] ... CHAINHASH_SIZE: 32768
[ 0.004000] memory used by lock dependency info: 7359 kB
[ 0.004000] per task-struct memory footprint: 1920 bytes
[ 0.004000] ACPI: Core revision 20180313
[ 0.004000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[ 0.004000] hpet clockevent registered
[ 0.004010] APIC: Switch to symmetric I/O mode setup
[ 0.004493] x2apic enabled
[ 0.004870] Switched APIC routing to physical x2apic.
[ 0.005246] enabled ExtINT on CPU#0
[ 0.006001] ENABLING IO-APIC IRQs
[ 0.006255] init IO_APIC IRQs
[ 0.006479] apic 0 pin 0 not connected
[ 0.006778] IOAPIC[0]: Set routing entry (0-1 -> 0xef -> IRQ 1 Mode:0 Active:0 Dest:0)
[ 0.007367] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0)
[ 0.007975] IOAPIC[0]: Set routing entry (0-3 -> 0xef -> IRQ 3 Mode:0 Active:0 Dest:0)
[ 0.008000] IOAPIC[0]: Set routing entry (0-4 -> 0xef -> IRQ 4 Mode:0 Active:0 Dest:0)
[ 0.008000] IOAPIC[0]: Set routing entry (0-5 -> 0xef -> IRQ 5 Mode:1 Active:0 Dest:0)
[ 0.008000] IOAPIC[0]: Set routing entry (0-6 -> 0xef -> IRQ 6 Mode:0 Active:0 Dest:0)
[ 0.008000] IOAPIC[0]: Set routing entry (0-7 -> 0xef -> IRQ 7 Mode:0 Active:0 Dest:0)
[ 0.008000] IOAPIC[0]: Set routing entry (0-8 -> 0xef -> IRQ 8 Mode:0 Active:0 Dest:0)
[ 0.008000] IOAPIC[0]: Set routing entry (0-9 -> 0xef -> IRQ 9 Mode:1 Active:0 Dest:0)
[ 0.008000] IOAPIC[0]: Set routing entry (0-10 -> 0xef -> IRQ 10 Mode:1 Active:0 Dest:0)
[ 0.008000] IOAPIC[0]: Set routing entry (0-11 -> 0xef -> IRQ 11 Mode:1 Active:0 Dest:0)
[ 0.008000] IOAPIC[0]: Set routing entry (0-12 -> 0xef -> IRQ 12 Mode:0 Active:0 Dest:0)
[ 0.008000] IOAPIC[0]: Set routing entry (0-13 -> 0xef -> IRQ 13 Mode:0 Active:0 Dest:0)
[ 0.008000] IOAPIC[0]: Set routing entry (0-14 -> 0xef -> IRQ 14 Mode:0 Active:0 Dest:0)
[ 0.008000] IOAPIC[0]: Set routing entry (0-15 -> 0xef -> IRQ 15 Mode:0 Active:0 Dest:0)
[ 0.008000] apic 0 pin 16 not connected
[ 0.008000] apic 0 pin 17 not connected
[ 0.008000] apic 0 pin 18 not connected
[ 0.008000] apic 0 pin 19 not connected
[ 0.008000] apic 0 pin 20 not connected
[ 0.008000] apic 0 pin 21 not connected
[ 0.008000] apic 0 pin 22 not connected
[ 0.008000] apic 0 pin 23 not connected
[ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.008000] tsc: Detected 2593.992 MHz processor
[ 0.008000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x25641074d3b, max_idle_ns: 440795244898 ns
[ 0.008000] Calibrating delay loop (skipped) preset value.. 5187.98 BogoMIPS (lpj=10375968)
[ 0.008005] pid_max: default: 4096 minimum: 301
[ 0.008491] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.009034] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.009530] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.010001] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.010780] mce: CPU supports 10 MCE banks
[ 0.011079] mce: unknown CPU type - not enabling MCE support
[ 0.011475] numa_add_cpu cpu 0 node 0: mask now 0
[ 0.012004] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.012378] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.012793] Spectre V2 : Mitigation: Full generic retpoline
[ 0.025115] Freeing SMP alternatives memory: 64K
[ 0.025856] random: get_random_u64 called from copy_process+0x2a8/0x1be0 with crng_init=0
[ 0.026544] TSC deadline timer enabled
[ 0.026824] smpboot: CPU0: GenuineIntel Intel Core Processor (Haswell) (family: 0x6, model: 0x3c, stepping: 0x4)
[ 0.027700] Performance Events: no PMU driver, software events only.
[ 0.028000] Hierarchical SRCU implementation.
[ 0.028000] NMI watchdog: Perf event create on CPU 0 failed with -2
[ 0.028000] NMI watchdog: Perf NMI watchdog permanently disabled
[ 0.028000] smp: Bringing up secondary CPUs ...
[ 0.028000] smp: Brought up 1 node, 1 CPU
[ 0.028000] smpboot: Max logical packages: 1
[ 0.028000] ----------------
[ 0.028000] | NMI testsuite:
[ 0.028004] --------------------
[ 0.028243] remote IPI: ok |
[ 0.028478] local IPI: ok |
[ 0.028717] --------------------
[ 0.028950] Good, all 2 testcases passed! |
[ 0.029263] ---------------------------------
[ 0.029573] smpboot: Total of 1 processors activated (5187.98 BogoMIPS)
[ 0.032006] node 0 initialised, 62411 pages in 4ms
[ 0.032536] devtmpfs: initialized
[ 0.033307] random: get_random_u32 called from bucket_table_alloc+0x139/0x180 with crng_init=0
[ 0.034339] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.035039] futex hash table entries: 16 (order: -1, 2048 bytes)
[ 0.035509] xor: automatically using best checksumming function avx
[ 0.036122] regulator-dummy: no parameters
[ 0.036702] NET: Registered protocol family 16
[ 0.037628] cpuidle: using governor ladder
[ 0.038317] ACPI: bus type PCI registered
[ 0.038681] PCI: Using configuration type 1 for base access
[ 0.051123] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.051698] workqueue: round-robin CPU selection forced, expect performance impact
[ 0.052100] cryptd: max_cpu_qlen set to 1000
[ 0.120006] raid6: sse2x1 gen() 10803 MB/s
[ 0.188004] raid6: sse2x1 xor() 7817 MB/s
[ 0.256010] raid6: sse2x2 gen() 12764 MB/s
[ 0.324004] raid6: sse2x2 xor() 8503 MB/s
[ 0.392007] raid6: sse2x4 gen() 15374 MB/s
[ 0.460005] raid6: sse2x4 xor() 9711 MB/s
[ 0.528006] raid6: avx2x1 gen() 21076 MB/s
[ 0.596008] raid6: avx2x1 xor() 14627 MB/s
[ 0.664006] raid6: avx2x2 gen() 24251 MB/s
[ 0.732005] raid6: avx2x2 xor() 15615 MB/s
[ 0.800007] raid6: avx2x4 gen() 28276 MB/s
[ 0.868004] raid6: avx2x4 xor() 17823 MB/s
[ 0.868316] raid6: using algorithm avx2x4 gen() 28276 MB/s
[ 0.868718] raid6: .... xor() 17823 MB/s, rmw enabled
[ 0.869087] raid6: using avx2x2 recovery algorithm
[ 0.869644] ACPI: Added _OSI(Module Device)
[ 0.869952] ACPI: Added _OSI(Processor Device)
[ 0.870276] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.870611] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.870999] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.872560] ACPI: 1 ACPI AML tables successfully acquired and loaded
[ 0.875164] ACPI: Interpreter enabled
[ 0.875450] ACPI: (supports S0 S5)
[ 0.875707] ACPI: Using IOAPIC for interrupt routing
[ 0.876022] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.876831] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 0.881312] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.881772] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[ 0.882196] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.882748] PCI host bridge to bus 0000:00
[ 0.883053] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.883543] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.884006] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.884854] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff window]
[ 0.885384] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.885838] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 0.886861] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 0.887759] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 0.892547] pci 0000:00:01.1: reg 0x20: [io 0xc0c0-0xc0cf]
[ 0.895303] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.895808] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.896007] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.896505] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.897181] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 0.897898] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
[ 0.898413] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
[ 0.899286] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[ 0.900950] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[ 0.905479] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[ 0.912010] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[ 0.912878] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[ 0.915998] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[ 0.917401] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f]
[ 0.924996] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[ 0.927113] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[ 0.929015] pci 0000:00:04.0: reg 0x10: [io 0xc040-0xc07f]
[ 0.931399] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[ 0.936932] pci 0000:00:04.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
[ 0.939992] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[ 0.942008] pci 0000:00:05.0: reg 0x10: [io 0xc080-0xc0bf]
[ 0.944006] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff]
[ 0.950773] pci 0000:00:05.0: reg 0x20: [mem 0xfe004000-0xfe007fff 64bit pref]
[ 0.953660] pci 0000:00:06.0: [8086:25ab] type 00 class 0x088000
[ 0.954850] pci 0000:00:06.0: reg 0x10: [mem 0xfebf3000-0xfebf300f]
[ 0.964308] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.964892] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.965423] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.966551] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.967027] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[ 0.968105] SCSI subsystem initialized
[ 0.968424] libata version 3.00 loaded.
[ 0.968788] pps_core: LinuxPPS API ver. 1 registered
[ 0.969146] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.969811] PTP clock support registered
[ 0.970102] EDAC MC: Ver: 3.0.0
[ 0.970483] EDAC DEBUG: edac_mc_sysfs_init: device mc created
[ 0.971694] FPGA manager framework
[ 0.971998] Advanced Linux Sound Architecture Driver Initialized.
[ 0.972018] PCI: Using ACPI for IRQ routing
[ 0.972326] PCI: pci_cache_line_size set to 64 bytes
[ 0.972776] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.973218] e820: reserve RAM buffer [mem 0x1ffdc000-0x1fffffff]
[ 0.973824] NET: Registered protocol family 8
[ 0.974161] NET: Registered protocol family 20
[ 0.974615] nfc: nfc_init: NFC Core ver 0.1
[ 0.974959] NET: Registered protocol family 39
[ 0.975700] clocksource: Switched to clocksource kvm-clock
[ 0.976000] VFS: Disk quotas dquot_6.6.0
[ 0.976000] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.976000] FS-Cache: Loaded
[ 0.976000] CacheFiles: Loaded
[ 0.976000] pnp: PnP ACPI init
[ 0.976000] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.976000] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.976000] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.976000] pnp 00:03: [dma 2]
[ 0.976049] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.976605] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.977141] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.977695] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.978438] pnp: PnP ACPI: found 7 devices
[ 0.983588] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.984320] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.984768] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.985219] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.985711] pci_bus 0000:00: resource 7 [mem 0x20000000-0xfebfffff window]
[ 0.986305] NET: Registered protocol family 2
[ 0.986832] tcp_listen_portaddr_hash hash table entries: 256 (order: 2, 18432 bytes)
[ 0.987414] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.988348] TCP bind hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.988950] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.989446] UDP hash table entries: 256 (order: 3, 40960 bytes)
[ 0.989890] UDP-Lite hash table entries: 256 (order: 3, 40960 bytes)
[ 0.990429] NET: Registered protocol family 1
[ 0.990958] RPC: Registered named UNIX socket transport module.
[ 0.991401] RPC: Registered udp transport module.
[ 0.991743] RPC: Registered tcp transport module.
[ 0.992091] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.992704] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.993142] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.993577] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.994052] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.994696] PCI: CLS 0 bytes, default 64
[ 0.995049] Unpacking initramfs...
[ 1.059927] Freeing initrd memory: 3932K
[ 1.062674] _warn_unseeded_randomness: 4 callbacks suppressed
[ 1.062683] random: get_random_bytes called from cpu_startup_entry+0x28/0x70 with crng_init=0
[ 1.560188] random: get_random_u32 called from get_random_order+0x72/0xb0 with crng_init=0
[ 2.080100] tsc: Refined TSC clocksource calibration: 2593.989 MHz
[ 2.080822] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25640db9c9f, max_idle_ns: 440795213164 ns
[ 5.579417] random: get_random_u32 called from stress_one_work+0x18/0xa0 with crng_init=0
[ 7.588525] rcu-torture:--- Start of test: nreaders=1 nfakewriters=4 stat_interval=60 verbose=1 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4 shutdown_secs=0 stall_cpu=0 stall_cpu_holdoff=10 stall_cpu_irqsoff=0 n_barrier_cbs=0 onoff_interval=0 onoff_holdoff=0
[ 7.592128] rcu-torture: Creating rcu_torture_writer task
[ 7.592784] rcu-torture: Creating rcu_torture_fakewriter task
[ 7.593415] rcu-torture: rcu_torture_writer task started
[ 7.593980] rcu-torture: GP expediting controlled from boot/sysfs for rcu.
[ 7.594693] rcu_torture_writer: Testing conditional GPs.
[ 7.595280] rcu_torture_writer: Testing expedited GPs.
[ 7.595870] rcu_torture_writer: Testing asynchronous GPs.
[ 7.596492] rcu_torture_writer: Testing normal GPs.
[ 7.597069] rcu-torture: Creating rcu_torture_fakewriter task
[ 7.597751] rcu-torture: rcu_torture_fakewriter task started
[ 7.598417] rcu-torture: Creating rcu_torture_fakewriter task
[ 7.599053] rcu-torture: rcu_torture_fakewriter task started
[ 7.599666] rcu-torture: Creating rcu_torture_fakewriter task
[ 7.600289] rcu-torture: rcu_torture_fakewriter task started
[ 7.600899] rcu-torture: Creating rcu_torture_reader task
[ 7.601479] rcu-torture: rcu_torture_fakewriter task started
[ 7.602090] rcu-torture: Creating rcu_torture_stats task
[ 7.602672] rcu-torture: rcu_torture_reader task started
[ 7.603247] rcu-torture: Creating torture_shuffle task
[ 7.603810] rcu-torture: rcu_torture_stats task started
[ 7.605103] rcu-torture: Creating torture_stutter task
[ 7.605730] rcu-torture: torture_shuffle task started
[ 7.606315] rcu-torture: Creating rcu_torture_cbflood task
[ 7.606973] rcu-torture: torture_stutter task started
[ 7.607984] Key type blacklist registered
[ 7.608500] random: get_random_bytes called from key_alloc+0x249/0x400 with crng_init=0
[ 7.609841] rcu-torture: rcu_torture_cbflood task started
[ 7.610445] workingset: timestamp_bits=40 max_order=17 bucket_order=0
[ 7.611209] zbud: loaded
[ 7.612755] DLM installed
[ 7.613338] NFS: Registering the id_resolver key type
[ 7.613943] Key type id_resolver registered
[ 7.614419] Key type id_legacy registered
[ 7.614942] random: get_random_u32 called from init_cifs+0xc6/0x40f with crng_init=0
[ 7.615973] Key type cifs.spnego registered
[ 7.616489] ntfs: driver 2.1.32 [Flags: R/O].
[ 7.617016] efs: 1.0a - http://aeschi.ch.eu.org/efs/
[ 7.618419] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[ 7.619836] fuse init (API version 7.26)
[ 7.620476] orangefs_debugfs_init: called with debug mask: :none: :0:
[ 7.621308] orangefs_init: module version upstream loaded
[ 7.621962] JFS: nTxBlock = 3546, nTxLock = 28375
[ 7.623849] NILFS version 2 loaded
[ 7.624331] ocfs2: Registered cluster interface o2cb
[ 7.624984] ocfs2: Registered cluster interface user
[ 7.625627] OCFS2 User DLM kernel interface loaded
[ 7.627349] random: get_random_u32 called from bucket_table_alloc+0x139/0x180 with crng_init=0
[ 7.628935] gfs2: GFS2 installed
[ 7.629352] FS-Cache: Netfs 'ceph' registered for caching
[ 7.629981] ceph: loaded (mds proto 32)
[ 7.630418] pstore: using 842 compression
[ 7.635228] async_tx: api initialized (async)
[ 7.635712] Key type asymmetric registered
[ 7.636174] Asymmetric key parser 'x509' registered
[ 7.636733] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 7.637605] io scheduler noop registered
[ 7.638038] io scheduler cfq registered (default)
[ 7.638563] io scheduler kyber registered
[ 7.639030] io scheduler bfq registered
[ 7.640808] crc32: CRC_LE_BITS = 8, CRC_BE BITS = 8
[ 7.641363] crc32: self tests passed, processed 225944 bytes in 628242 nsec
[ 7.642714] crc32c: CRC_LE_BITS = 8
[ 7.643079] crc32c: self tests passed, processed 225944 bytes in 299069 nsec
[ 7.677565] crc32_combine: 8373 self tests passed
[ 7.710065] crc32c_combine: 8373 self tests passed
[ 7.710531] xz_dec_test: module loaded
[ 7.710806] xz_dec_test: Create a device node with 'mknod xz_dec_test c 245 0' and write .xz files to it.
[ 7.711852] gpio_winbond: chip ID at 2e is ffff
[ 7.712185] gpio_winbond: not an our chip
[ 7.712489] gpio_winbond: chip ID at 4e is ffff
[ 7.712813] gpio_winbond: not an our chip
[ 7.713200] cpcihp_zt5550: ZT5550 CompactPCI Hot Plug Driver version: 0.2
[ 7.713698] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
[ 7.714242] cpcihp_generic: not configured, disabling.
[ 7.714622] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.715127] switchtec: loaded.
[ 7.715640] cr_bllcd: INTEL CARILLO RANCH LPC not found.
[ 7.716059] cr_bllcd: Carillo Ranch Backlight Driver Initialized.
[ 7.716661] VIA Graphics Integration Chipset framebuffer 2.4 initializing
[ 7.717214] vmlfb: initializing
[ 7.717456] Could not find Carillo Ranch MCH device.
[ 7.717914] hgafb: HGA card not detected.
[ 7.718215] hgafb: probe of hgafb.0 failed with error -22
[ 7.718666] ipmi message handler version 39.2
[ 7.718985] IPMI System Interface driver.
[ 7.719324] ipmi_si: Unable to find any System Interface(s)
[ 7.719725] IPMI SSIF Interface driver
[ 7.720038] IPMI Watchdog: driver initialized
[ 7.720474] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 7.721014] ACPI: Power Button [PWRF]
[ 7.721366] Warning: Processor Platform Limit event detected, but not handled.
[ 7.721883] Consider compiling CPUfreq support into your kernel.
[ 7.734190] HDLC line discipline maxframe=4096
[ 7.734529] N_HDLC line discipline registered.
[ 7.734858] r3964: Philips r3964 Driver $Revision: 1.10 $
[ 7.735242] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 7.758426] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 7.782022] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 7.783236] MOXA Intellio family driver version 6.0k
[ 7.783696] MOXA Smartio/Industio family driver version 2.0.5
[ 7.784208] Initializing Nozomi driver 2.1d
[ 7.784583] SyncLink GT
[ 7.784807] SyncLink GT, tty major#235
[ 7.785140] SyncLink GT no devices found
[ 7.785624] lp: driver loaded but no devices found
[ 7.786037] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[ 7.786638] ac.o: No PCI boards found.
[ 7.786957] ac.o: For an ISA board you must supply memory and irq parameters.
[ 7.787601] Non-volatile memory driver v1.3
[ 7.788088] ppdev: user-space parallel port driver
[ 7.788508] telclk_interrupt = 0xf non-mcpbl0010 hw.
[ 7.788980] drm_mm: Testing DRM range manger (struct drm_mm), with random_seed=0x62410a2d max_iterations=8192 max_prime=128
[ 7.789913] drm_mm: igt_sanitycheck - ok!
[ 7.790277] igt_debug 0x0000000000000000-0x0000000000000200: 512: free
[ 7.790848] igt_debug 0x0000000000000200-0x0000000000000600: 1024: used
[ 7.791407] igt_debug 0x0000000000000600-0x0000000000000a00: 1024: free
[ 7.791972] igt_debug 0x0000000000000a00-0x0000000000000e00: 1024: used
[ 7.792543] igt_debug 0x0000000000000e00-0x0000000000001000: 512: free
[ 7.793106] igt_debug total: 4096, used 2048 free 2048
[ 40.672525] CRAT table not found
[ 40.674136] Virtual CRAT table created for CPU
[ 40.674464] Parsing CRAT table with 1 nodes
[ 40.675286] Creating topology SYSFS entries
[ 40.675632] Topology: Add CPU node
[ 40.675882] Finished initializing topology
[ 40.677781] kfd kfd: Initialized module
[ 40.678073] [drm] radeon kernel modesetting enabled.
[ 40.678976] [drm] amdgpu kernel modesetting enabled.
[ 40.679618] [drm] Initialized vgem 1.0.0 20120112 for virtual device on minor 0
[ 40.680440] [drm] Found bochs VGA, ID 0xb0c0.
[ 40.680764] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebf0000.
[ 40.681344] [TTM] Zone kernel: Available graphics memory: 227000 kiB
[ 40.681818] [TTM] Initializing pool allocator
[ 40.682139] [TTM] Initializing DMA pool allocator
[ 40.684432] bochsdrmfb: enable CONFIG_FB_LITTLE_ENDIAN to support this framebuffer
[ 40.685017] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 1
[ 40.685661] parport_pc 00:04: reported by Plug and Play ACPI
[ 40.686150] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[ 40.686766] lp0: using parport0 (interrupt-driven).
[ 40.687123] lp0: console ready
[ 40.691014] loop: module loaded
[ 40.691400] MM: desc_per_page = 128
[ 40.693738] drbd: initialized. Version: 8.4.10 (api:1/proto:86-101)
[ 40.694196] drbd: built-in
[ 40.694393] drbd: registered as block device major 147
[ 40.694763] mtip32xx Version 1.3.1
[ 40.695048] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
[ 40.695552] dummy-irq: no IRQ given. Use irq=N
[ 40.695905] Phantom Linux Driver, version n0.9.8, init OK
[ 40.696347] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[ 40.696948] c2port c2port0: C2 port uc added
[ 40.697256] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
[ 40.697891] Guest personality initialized and is inactive
[ 40.698343] VMCI host device registered (name=vmci, major=10, minor=55)
[ 40.698823] Initialized host personality
[ 40.699925] nfcsim 0.2 initialized
[ 40.700262] Uniform Multi-Platform E-IDE driver
[ 40.701100] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 40.701796] ide-gd driver 1.18
[ 40.702027] ide-cd driver 5.00
[ 40.702301] Loading iSCSI transport class v2.0-870.
[ 40.702822] rdac: device handler registered
[ 40.703182] emc: device handler registered
[ 40.703517] alua: device handler registered
[ 40.703891] osd: LOADED open-osd 0.2.1
[ 40.704436] _warn_unseeded_randomness: 2 callbacks suppressed
[ 40.704441] random: get_random_bytes called from nvmet_subsys_alloc+0x48/0x130 with crng_init=0
[ 40.705607] SSFDC read-only Flash Translation layer
[ 40.706003] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 40.706507] slram: not enough parameters.
[ 40.707513] ftl_cs: FTL header not found.
[ 40.832932] parport0: AVR Butterfly
[ 40.833229] parport0: cannot grant exclusive access for device spi-lm70llp
[ 40.833736] spi_lm70llp: spi_lm70llp probe fail, status -12
[ 40.834261] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[ 40.834954] ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[ 40.835797] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 40.836612] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 40.910781] PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 41.247663] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[ 41.248498] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[ 41.249097] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 41.249514] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 41.249974] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 41.250480] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 41.250905] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k
[ 41.251446] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 41.251973] mkiss: AX.25 Multikiss, Hans Albas PE1AYX
[ 41.252357] AX.25: 6pack driver, Revision: 0.3.0
[ 41.252693] YAM driver version 0.8 by F1OAT/F6FBB
[ 41.253431] baycom_par: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[ 41.253431] baycom_par: version 0.9
[ 41.254513] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA
[ 41.254933] hdlcdrv: version 0.8
[ 41.255577] aoe: AoE v85 initialised.
[ 41.255958] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 41.257179] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 41.257551] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 41.302662] mousedev: PS/2 mouse device common for all mice
[ 41.303398] i2c /dev entries driver
[ 41.303813] i2c-parport: adapter type unspecified
[ 41.304165] i2c-parport-light: adapter type unspecified
[ 41.304630] IR RC5(x/sz) protocol handler initialized
[ 41.304995] IR RC6 protocol handler initialized
[ 41.305318] IR JVC protocol handler initialized
[ 41.305645] IR Sony protocol handler initialized
[ 41.305974] IR SANYO protocol handler initialized
[ 41.306309] IR Sharp protocol handler initialized
[ 41.306648] IR XMP protocol handler initialized
[ 41.306971] ir_imon_decoder: IR iMON protocol handler initialized
[ 41.307673] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 41.308599] pps pps0: new PPS source ktimer
[ 41.308908] pps pps0: ktimer PPS source registered
[ 41.309250] pps_ldisc: PPS line discipline registered
[ 41.309629] Driver for 1-wire Dallas network protocol.
[ 41.310025] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[ 41.310486] w1_f0d_init()
[ 41.310990] applesmc: supported laptop not found!
[ 41.311506] applesmc: driver init failed (ret=-19)!
[ 41.313363] EDAC DEBUG: i5400_init: MC:
[ 41.313852] EDAC DEBUG: i7core_init:
[ 41.314352] EDAC DEBUG: i82975x_init: i82975x pci_get_device fail
[ 41.315082] EDAC DEBUG: i3000_init: i3000 pci_get_device fail
[ 41.315710] EDAC DEBUG: x38_init: x38 pci_get_device fail
[ 41.316224] sdhci: Secure Digital Host Controller Interface driver
[ 41.316672] sdhci: Copyright(c) Pierre Ossman
[ 41.317784] ledtrig-cpu: registered to indicate activity on CPUs
[ 41.318253] random: get_random_bytes called from ib_cm_init+0xf9/0x19b with crng_init=0
[ 41.319184] iscsi: registered transport (iser)
[ 41.319515] OPA Virtual Network Driver - v1.0
[ 41.319924] hidraw: raw HID events driver (C) Jiri Kosina
[ 41.320987] hdaps: supported laptop not found!
[ 41.321321] hdaps: driver init failed (ret=-19)!
[ 41.323060] AMD(R) PCI-E Non-Transparent Bridge Driver 1.0
[ 41.323484] IDT PCI-E Non-Transparent Bridge Driver 2.0
[ 41.323883] Intel(R) PCI-E Non-Transparent Bridge Driver 2.0
[ 41.324385] Software Queue-Pair Transport over NTB, version 4
[ 41.324855] fake-fmc-carrier: mezzanine 0
[ 41.325154] Manufacturer: fake-vendor
[ 41.325454] Product name: fake-design-for-testing
[ 41.325866] fmc fake-design-for-testing-f001: Driver has no ID: matches all
[ 41.326371] fmc_trivial: probe of fake-design-for-testing-f001 failed with error -95
[ 41.326932] fmc fake-design-for-testing-f001: Driver has no ID: matches all
[ 41.327512] fmc_chardev fake-design-for-testing-f001: Created misc device "fake-design-for-testing-f001"
[ 41.330576] oprofile: using NMI timer interrupt.
[ 41.330967] NET: Registered protocol family 26
[ 41.331435] netem: version 1.3
[ 41.331675] u32 classifier
[ 41.331875] Performance counters on
[ 41.332172] input device check on
[ 41.332518] IPVS: Registered protocols (TCP, UDP, AH)
[ 41.332944] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[ 41.333472] random: get_random_bytes called from ip_vs_conn_init+0x10b/0x116 with crng_init=0
[ 41.334139] IPVS: ipvs loaded.
[ 41.334376] IPVS: [rr] scheduler registered.
[ 41.334693] IPVS: [lblc] scheduler registered.
[ 41.335014] IPVS: [lblcr] scheduler registered.
[ 41.335339] IPVS: [dh] scheduler registered.
[ 41.335650] IPVS: [sed] scheduler registered.
[ 41.335962] IPVS: [nq] scheduler registered.
[ 41.336312] gre: GRE over IPv4 demultiplexor driver
[ 41.336670] ip_gre: GRE over IPv4 tunneling driver
[ 41.337374] Initializing XFRM netlink socket
[ 41.337747] NET: Registered protocol family 10
[ 41.339078] Segment Routing with IPv6
[ 41.339391] mip6: Mobile IPv6
[ 41.339653] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 41.340236] NET: Registered protocol family 17
[ 41.340570] NET: Registered protocol family 15
[ 41.340961] NET: Registered protocol family 5
[ 41.341660] NET: Registered protocol family 6
[ 41.342006] NET: Registered protocol family 3
[ 41.342411] RPC: Registered rdma transport module.
[ 41.342769] RPC: Registered rdma backchannel transport module.
[ 41.343205] NET: Registered protocol family 33
[ 41.343528] Key type rxrpc registered
[ 41.343797] Key type rxrpc_s registered
[ 41.344151] NET: Registered protocol family 41
[ 41.344543] lec:lane_module_init: lec.c: initialized
[ 41.344915] mpoa:atm_mpoa_init: mpc.c: initialized
[ 41.345269] l2tp_core: L2TP core driver, V2.0
[ 41.345585] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 41.345996] l2tp_netlink: L2TP netlink interface
[ 41.346340] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 41.346775] l2tp_debugfs: L2TP debugfs support
[ 41.347094] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 41.347554] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[ 41.348179] DECnet: Routing cache hash table of 512 buckets, 32Kbytes
[ 41.348677] NET: Registered protocol family 12
[ 41.349016] NET: Registered protocol family 35
[ 41.349361] 8021q: 802.1Q VLAN Support v1.8
[ 41.349846] DCCP: Activated CCID 2 (TCP-like)
[ 41.350209] sctp: Hash tables configured (bind 64/64)
[ 41.350628] tipc: Activated (version 2.0.0)
[ 41.350951] NET: Registered protocol family 30
[ 41.351338] tipc: Started in single node mode
[ 41.351692] NET: Registered protocol family 43
[ 41.352077] NET: Registered protocol family 37
[ 41.352411] Key type dns_resolver registered
[ 41.352729] Key type ceph registered
[ 41.353084] libceph: loaded (mon/osd proto 15/24)
[ 41.353519] batman_adv: B.A.T.M.A.N. advanced 2018.1 (compatibility version 15) loaded
[ 41.354099] openvswitch: Open vSwitch switching datapath
[ 41.354599] NET: Registered protocol family 40
[ 41.354943] mpls_gso: MPLS GSO support
[ 41.355260] start plist test
[ 41.356648] end plist test
[ 41.356850] mce: Unable to init MCE device (rc: -5)
[ 41.357566] ... APIC ID: 00000000 (0)
[ 41.357867] ... APIC VERSION: 01050014
[ 41.358141] 0000000000000000000000000000000000000000000000000000000000000000
[ 41.358659] 0000000000000000000000000000000000000000000000000000000000000000
[ 41.359166] 0000000000000000000000000000000000000000000000000000000000000000
[ 41.359682] number of MP IRQ sources: 15.
[ 41.359972] number of IO-APIC #0 registers: 24.
[ 41.360314] testing the IO APIC.......................
[ 41.360698] IO APIC #0......
[ 41.360909] .... register #00: 00000000
[ 41.361186] ....... : physical APIC id: 00
[ 41.361499] ....... : Delivery Type: 0
[ 41.361790] ....... : LTS : 0
[ 41.362077] .... register #01: 00170011
[ 41.362353] ....... : max redirection entries: 17
[ 41.362716] ....... : PRQ implemented: 0
[ 41.363024] ....... : IO APIC version: 11
[ 41.363338] .... register #02: 00000000
[ 41.363619] ....... : arbitration: 00
[ 41.363909] .... IRQ redirection table:
[ 41.364193] IOAPIC 0:
[ 41.364370] pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 41.364940] pin01, enabled , edge , high, V(24), IRR(0), S(0), physical, D(00), M(0)
[ 41.365502] pin02, enabled , edge , high, V(30), IRR(0), S(0), physical, D(00), M(0)
[ 41.366067] pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 41.366635] pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 41.367198] pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 41.367764] pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 41.368332] pin07, enabled , edge , high, V(22), IRR(0), S(0), physical, D(00), M(0)
[ 41.368899] pin08, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 41.369457] pin09, enabled , level, high, V(21), IRR(0), S(0), physical, D(00), M(0)
[ 41.370018] pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 41.370577] pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 41.371139] pin0c, enabled , edge , high, V(23), IRR(0), S(0), physical, D(00), M(0)
[ 41.371700] pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 41.372265] pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 41.372834] pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 41.373394] pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 41.373960] pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 41.374519] pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 41.375086] pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 41.375652] pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 41.376219] pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 41.376780] pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 41.377342] pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[ 41.377901] IRQ to pin mappings:
[ 41.378137] IRQ0 -> 0:2
[ 41.378320] IRQ1 -> 0:1
[ 41.378502] IRQ3 -> 0:3
[ 41.378687] IRQ4 -> 0:4
[ 41.378870] IRQ5 -> 0:5
[ 41.379053] IRQ6 -> 0:6
[ 41.379236] IRQ7 -> 0:7
[ 41.379419] IRQ8 -> 0:8
[ 41.379606] IRQ9 -> 0:9
[ 41.379790] IRQ10 -> 0:10
[ 41.379985] IRQ11 -> 0:11
[ 41.380186] IRQ12 -> 0:12
[ 41.380383] IRQ13 -> 0:13
[ 41.380579] IRQ14 -> 0:14
[ 41.380777] IRQ15 -> 0:15
[ 41.380973] .................................... done.
[ 41.381361] AVX2 version of gcm_enc/dec engaged.
[ 41.381701] AES CTR mode by8 optimization enabled
[ 41.382764] sched_clock: Marking stable (41380182725, 0)->(41510156314, -129973589)
[ 41.383476] page_owner is disabled
[ 41.383870] kAFS: Red Hat AFS client v0.1 registering.
[ 41.384318] FS-Cache: Netfs 'afs' registered for caching
[ 41.385016] RIO: rio_register_scan for mport_id=-1
[ 41.385714] rdma_rxe: loaded
[ 41.385937] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[ 41.386459] ALSA device list:
[ 41.386686] No soundcards found.
[ 41.388071] Freeing unused kernel memory: 1192K
[ 41.388410] Write protecting the kernel read-only data: 36864k
[ 41.389786] Freeing unused kernel memory: 1992K
[ 41.393111] Freeing unused kernel memory: 1440K
[ 41.393950] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 41.394567] platform regulatory.0: Falling back to user helper
[ 41.395244] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 41.395720] rodata_test: all tests were successful
/etc/rcS.d/S00fbsetup: line 3: /sbin/modprobe: not found
Please wait: booting...
Starting udev
[ 41.476966] cfg80211: failed to load regulatory.db
[ 41.756694] _warn_unseeded_randomness: 701 callbacks suppressed
[ 41.756701] random: get_random_u64 called from copy_process+0x2a8/0x1be0 with crng_init=0
[ 41.759164] random: get_random_u64 called from arch_rnd+0x1d/0x40 with crng_init=0
[ 41.759984] random: get_random_u64 called from load_elf_binary+0x39d/0x15cc with crng_init=0
[ 41.775022] gfs2: path_lookup on rootfs returned error -2
Kernel tests: Boot OK!
[ 41.931109] random: trinity: uninitialized urandom read (4 bytes read)
[ 41.934655] random: trinity: uninitialized urandom read (4 bytes read)
[ 44.751456] random: get_random_u32 called from bucket_table_alloc+0x139/0x180 with crng_init=0
[ 52.756945] random: get_random_u64 called from randomize_page+0x4a/0x60 with crng_init=0
01 05 00
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 52.890071] sctp: [Deprecated]: trinity-main (pid 799) Use of int in maxseg socket option.
[ 52.890071] Use struct sctp_assoc_value instead
[ 52.891171] trinity-main uses obsolete (PF_INET,SOCK_PACKET)
[ 52.905617] kernel msg: ebtables bug: please report to author: Wrong len argument
[ 52.906159] kernel msg: ebtables bug: please report to author: Wrong len argument
[ 52.906695] kernel msg: ebtables bug: please report to author: Wrong len argument
[ 52.911185] random: get_random_u64 called from copy_process+0x2a8/0x1be0 with crng_init=1
[ 52.924287] warning: process `trinity-c2' used the deprecated sysctl system call with
[ 52.979419] VFS: Warning: trinity-c3 using old stat() call. Recompile your binary.
[ 53.013837] mmap: trinity-c2 (816) uses deprecated remap_file_pages() syscall. See Documentation/vm/remap_file_pages.txt.
[ 53.018904] caif:caif_disconnect_client(): nothing to disconnect
[ 53.941851] VFS: Warning: trinity-c2 using old stat() call. Recompile your binary.
[ 54.044945] VFS: Warning: trinity-c0 using old stat() call. Recompile your binary.
[ 55.070489] VFS: Warning: trinity-c0 using old stat() call. Recompile your binary.
[ 56.158535] warning: process `trinity-c1' used the obsolete bdflush system call
[ 56.159163] Fix your initscripts?
[ 59.136117] trinity-c3 (806): attempted to duplicate a private mapping with mremap. This is not supported.
[ 68.594153] rcu-torture: rtc: (ptrval) ver: 997 tfle: 0 rta: 997 rtaf: 0 rtf: 988 rtmbe: 0 rtbe: 0 rtbke: 0 rtbre: 0 rtbf: 0 rtb: 0 nt: 1154 onoff: 0/0:0/0 -1,0:-1,0 0:0 (HZ=250) barrier: 0/0:0 cbflood: 28
[ 68.597080] rcu-torture: Reader Pipe: 10523821 0 0 0 0 0 0 0 0 0 0
[ 68.597768] rcu-torture: Reader Batch: 10337906 185915 0 0 0 0 0 0 0 0 0
[ 68.598480] rcu-torture: Free-Block Circulation: 996 996 995 994 993 992 991 990 989 988 0
[ 82.912079] _warn_unseeded_randomness: 1 callbacks suppressed
[ 82.912087] random: get_random_bytes called from __prandom_timer+0x25/0xa0 with crng_init=1
[ 83.277027] random: get_random_bytes called from key_alloc+0x249/0x400 with crng_init=1
[ 84.345323] raw_sendmsg: trinity-c2 forgot to set AF_INET. Fix it!
[ 85.485647] synth uevent: /devices/virtual/misc/fuse: unknown uevent action string
[ 85.486293] misc fuse: uevent: failed to send synthetic uevent
[ 86.373915] usercopy: Kernel memory exposure attempt detected from SLAB object 'NSP' (offset 1144, size 20)!
[ 86.374651] ------------[ cut here ]------------
[ 86.374983] kernel BUG at mm/usercopy.c:100!
[ 86.375405] invalid opcode: 0000 [#1] SMP
[ 86.375700] CPU: 0 PID: 853 Comm: trinity-c1 Not tainted 4.17.0-rc3 #217
[ 86.376178] RIP: 0010:usercopy_abort+0x77/0x80
[ 86.376493] RSP: 0018:ffffc9000085fdf8 EFLAGS: 00010282
[ 86.376867] RAX: 0000000000000060 RBX: 0000000000000014 RCX: 0000000000000000
[ 86.377367] RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000246
[ 86.377871] RBP: ffffc9000085fe18 R08: 0000000000000001 R09: 0000000000000000
[ 86.378371] R10: ffffffff830ebd0a R11: 00000000000003c9 R12: 0000000000000001
[ 86.378876] R13: 0000000000000014 R14: ffff88001b2884cc R15: 0000000000000014
[ 86.379378] FS: 000000000104a880(0000) GS:ffff88001f800000(0000) knlGS:0000000000000000
[ 86.379948] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 86.380353] CR2: 000000003a3a3a3b CR3: 000000001b1a7005 CR4: 00000000001606b0
[ 86.380859] DR0: 00007f39dd868000 DR1: 00007f39dd868000 DR2: 0000000000000000
[ 86.381360] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
[ 86.381868] Call Trace:
[ 86.382050] __check_heap_object+0xb3/0xc0
[ 86.382344] __check_object_size+0xee/0x1d0
[ 86.382649] ? __might_sleep+0x68/0x70
[ 86.382921] dn_getsockopt+0x201/0x300
[ 86.383191] __sys_getsockopt+0x85/0xc0
[ 86.383466] __x64_sys_getsockopt+0x1f/0x30
[ 86.383769] do_syscall_64+0x98/0x160
[ 86.384038] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 86.384396] RIP: 0033:0x457389
[ 86.384620] RSP: 002b:00007ffcd8e0fb88 EFLAGS: 00000246 ORIG_RAX: 0000000000000037
[ 86.385151] RAX: ffffffffffffffda RBX: 0000000000000037 RCX: 0000000000457389
[ 86.385654] RDX: 0000000000000001 RSI: 0000000042000000 RDI: 0000000000000189
[ 86.386153] RBP: 00007ffcd8e0fc30 R08: 0000000000000061 R09: 0000000076767676
[ 86.386675] R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000002
[ 86.387176] R13: 00007f8cd5a68058 R14: 000000000104a830 R15: 00007f8cd5a68000
[ 86.387682] Code: 0f 44 d0 53 48 c7 c0 8f a3 0a 83 51 48 c7 c6 85 a3 0a 83 41 53 48 89 f9 48 0f 45 f0 4c 89 d2 48 c7 c7 70 a4 0a 83 e8 7d 6e f0 ff <0f> 0b 0f 1f 80 00 00 00 00 48 85 f6 0f 84 b7 01 00 00 55 48 89
[ 86.389031] RIP: usercopy_abort+0x77/0x80 RSP: ffffc9000085fdf8
[ 86.389481] ---[ end trace 5103f13a815fc1bf ]---
[ 86.389818] Kernel panic - not syncing: Fatal exception
[ 86.390201] Kernel Offset: disabled
Elapsed time: 90
qemu-img create -f qcow2 disk-yocto-lkp-hsw01-105-0 256G
qemu-img create -f qcow2 disk-yocto-lkp-hsw01-105-1 256G
kvm=(
qemu-system-x86_64
-enable-kvm
-cpu Haswell,+smep
-kernel $kernel
-initrd /osimage/yocto/yocto-trinity-x86_64.cgz
-m 512
-smp 1
-device e1000,netdev=net0
-netdev user,id=net0
-boot order=nc
-no-reboot
-watchdog i6300esb
-watchdog-action debug
-rtc base=localtime
-drive file=disk-yocto-lkp-hsw01-105-0,media=disk,if=virtio
-drive file=disk-yocto-lkp-hsw01-105-1,media=disk,if=virtio
-serial stdio
-display none
-monitor null
)
append=(
root=/dev/ram0
hung_task_panic=1
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw
branch=linux-devel/devel-hourly-2018050117
BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s3-05012323/gcc-7/6da6c0db5316275015e8cc2959f12a17584aeb64/vmlinuz-4.17.0-rc3
drbd.minor_count=8
rcuperf.shutdown=0
)
"${kvm[@]}" -append "${append[*]}"
[-- Attachment #3: .config --]
[-- Type: text/plain, Size: 125770 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 4.17.0-rc3 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
CONFIG_KERNEL_LZMA=y
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not set
CONFIG_NO_HZ_FULL=y
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_GEN=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_FORCE=y
CONFIG_RCU_NOCB_CPU=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_ARCH_SUPPORTS_INT128=y
# CONFIG_NUMA_BALANCING is not set
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_BLK_CGROUP=y
CONFIG_DEBUG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
CONFIG_CGROUP_RDMA=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_HUGETLB is not set
CONFIG_CPUSETS=y
# CONFIG_PROC_PID_CPUSET is not set
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
# CONFIG_CGROUP_BPF is not set
CONFIG_CGROUP_DEBUG=y
CONFIG_SOCK_CGROUP_DATA=y
# CONFIG_NAMESPACES is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_ADVISE_SYSCALLS is not set
# CONFIG_MEMBARRIER is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_BPF_SYSCALL=y
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_EMBEDDED=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_PERF_USE_VMALLOC=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_PROFILING=y
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=y
CONFIG_OPROFILE_EVENT_MULTIPLEX=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_HAVE_CC_STACKPROTECTOR=y
# CONFIG_CC_STACKPROTECTOR_NONE is not set
# CONFIG_CC_STACKPROTECTOR_REGULAR is not set
CONFIG_CC_STACKPROTECTOR_STRONG=y
# CONFIG_CC_STACKPROTECTOR_AUTO is not set
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_ISA_BUS_API=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_REFCOUNT=y
# CONFIG_REFCOUNT_FULL is not set
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLK_DEV_ZONED=y
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
CONFIG_BLK_CMDLINE_PARSER=y
CONFIG_BLK_WBT=y
# CONFIG_BLK_WBT_SQ is not set
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
CONFIG_ACORN_PARTITION_ADFS=y
# CONFIG_ACORN_PARTITION_POWERTEC is not set
# CONFIG_ACORN_PARTITION_RISCIX is not set
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
CONFIG_MINIX_SUBPARTITION=y
# CONFIG_SOLARIS_X86_PARTITION is not set
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
CONFIG_SYSV68_PARTITION=y
CONFIG_CMDLINE_PARTITION=y
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_MQ_IOSCHED_DEADLINE is not set
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=y
# CONFIG_BFQ_GROUP_IOSCHED is not set
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_X2APIC=y
CONFIG_X86_MPPARSE=y
CONFIG_GOLDFISH=y
CONFIG_RETPOLINE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
# CONFIG_X86_GOLDFISH is not set
CONFIG_X86_INTEL_MID=y
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
# CONFIG_XEN is not set
CONFIG_KVM_GUEST=y
# CONFIG_KVM_DEBUG_FS is not set
CONFIG_PARAVIRT_TIME_ACCOUNTING=y
CONFIG_PARAVIRT_CLOCK=y
CONFIG_JAILHOUSE_GUEST=y
CONFIG_NO_BOOTMEM=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
# CONFIG_CPU_SUP_INTEL is not set
# CONFIG_CPU_SUP_AMD is not set
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_APB_TIMER=y
# CONFIG_DMI is not set
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS_RANGE_BEGIN=2
CONFIG_NR_CPUS_RANGE_END=8192
CONFIG_NR_CPUS_DEFAULT=64
CONFIG_NR_CPUS=64
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCELOG_LEGACY is not set
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
#
# Performance monitoring
#
CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_I8K=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_X86_5LEVEL is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_X86_DIRECT_GBPAGES=y
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_NUMA=y
CONFIG_AMD_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_NUMA_EMU=y
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
# CONFIG_SPARSEMEM_VMEMMAP is not set
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_GENERIC_GUP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
# CONFIG_BOUNCE is not set
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_HWPOISON_INJECT=y
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_THP_SWAP=y
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_CMA=y
# CONFIG_CMA_DEBUG is not set
# CONFIG_CMA_DEBUGFS is not set
CONFIG_CMA_AREAS=7
CONFIG_ZPOOL=y
CONFIG_ZBUD=y
CONFIG_Z3FOLD=y
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
CONFIG_ZSMALLOC_STAT=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_ZONE_DEVICE=y
CONFIG_PERCPU_STATS=y
# CONFIG_GUP_BENCHMARK is not set
CONFIG_X86_PMEM_LEGACY_DEVICE=y
CONFIG_X86_PMEM_LEGACY=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_ARCH_RANDOM is not set
CONFIG_X86_SMAP=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
CONFIG_KEXEC_VERIFY_SIG=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
CONFIG_COMPAT_VDSO=y
CONFIG_LEGACY_VSYSCALL_EMULATE=y
# CONFIG_LEGACY_VSYSCALL_NONE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
CONFIG_HAVE_LIVEPATCH=y
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_LPIT=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
# CONFIG_ACPI_IPMI is not set
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_DPTF_POWER is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_X86_PM_TIMER=y
CONFIG_SFI=y
#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_CPU_IDLE_GOV_MENU is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCI_BUS_ADDR_T_64BIT=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
CONFIG_PCI_STUB=y
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_ACPI is not set
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=y
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=y
CONFIG_HOTPLUG_PCI_SHPC=y
#
# Cadence PCIe controllers support
#
#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT is not set
#
# PCI host controller drivers
#
CONFIG_VMD=y
#
# PCI Endpoint
#
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
CONFIG_PCI_EPF_TEST=y
#
# PCI switch controller drivers
#
CONFIG_PCI_SW_SWITCHTEC=y
# CONFIG_ISA_BUS is not set
# CONFIG_ISA_DMA_API is not set
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
# CONFIG_YENTA_TI is not set
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=y
CONFIG_I82092=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_RAPIDIO=y
CONFIG_RAPIDIO_DISC_TIMEOUT=30
CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS=y
# CONFIG_RAPIDIO_DMA_ENGINE is not set
CONFIG_RAPIDIO_DEBUG=y
CONFIG_RAPIDIO_ENUM_BASIC=y
# CONFIG_RAPIDIO_CHMAN is not set
CONFIG_RAPIDIO_MPORT_CDEV=y
#
# RapidIO Switch drivers
#
CONFIG_RAPIDIO_TSI57X=y
CONFIG_RAPIDIO_CPS_XX=y
CONFIG_RAPIDIO_TSI568=y
CONFIG_RAPIDIO_CPS_GEN2=y
# CONFIG_RAPIDIO_RXS_GEN3 is not set
# CONFIG_X86_SYSFB is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_X86_X32=y
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_OFFLOAD=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_SMC=y
CONFIG_SMC_DIAG=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
CONFIG_NET_IPGRE_DEMUX=y
CONFIG_NET_IP_TUNNEL=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_UDP_TUNNEL=y
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_ESP_OFFLOAD=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_INET_RAW_DIAG=y
CONFIG_INET_DIAG_DESTROY=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
# CONFIG_INET6_ESP is not set
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_IPV6_ILA=y
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_GRE is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_IPV6_SEG6_LWTUNNEL=y
CONFIG_IPV6_SEG6_HMAC=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_INGRESS is not set
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_FAMILY_BRIDGE=y
CONFIG_NETFILTER_FAMILY_ARP=y
CONFIG_NETFILTER_NETLINK_LOG=y
# CONFIG_NF_CONNTRACK is not set
CONFIG_NF_LOG_COMMON=y
CONFIG_NF_LOG_NETDEV=y
CONFIG_NF_TABLES=y
CONFIG_NF_TABLES_INET=y
CONFIG_NF_TABLES_NETDEV=y
CONFIG_NFT_EXTHDR=y
CONFIG_NFT_META=y
CONFIG_NFT_RT=y
# CONFIG_NFT_NUMGEN is not set
CONFIG_NFT_SET_RBTREE=y
CONFIG_NFT_SET_HASH=y
# CONFIG_NFT_SET_BITMAP is not set
CONFIG_NFT_COUNTER=y
CONFIG_NFT_LOG=y
CONFIG_NFT_LIMIT=y
CONFIG_NFT_OBJREF=y
CONFIG_NFT_QUOTA=y
CONFIG_NFT_REJECT=y
CONFIG_NFT_REJECT_INET=y
CONFIG_NFT_COMPAT=y
CONFIG_NFT_HASH=y
CONFIG_NFT_FIB=y
CONFIG_NF_DUP_NETDEV=y
# CONFIG_NFT_DUP_NETDEV is not set
CONFIG_NFT_FWD_NETDEV=y
CONFIG_NETFILTER_XTABLES=y
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_LOG=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=y
CONFIG_IP_SET_BITMAP_IPMAC=y
# CONFIG_IP_SET_BITMAP_PORT is not set
CONFIG_IP_SET_HASH_IP=y
CONFIG_IP_SET_HASH_IPMARK=y
# CONFIG_IP_SET_HASH_IPPORT is not set
CONFIG_IP_SET_HASH_IPPORTIP=y
# CONFIG_IP_SET_HASH_IPPORTNET is not set
CONFIG_IP_SET_HASH_IPMAC=y
CONFIG_IP_SET_HASH_MAC=y
CONFIG_IP_SET_HASH_NETPORTNET=y
CONFIG_IP_SET_HASH_NET=y
CONFIG_IP_SET_HASH_NETNET=y
CONFIG_IP_SET_HASH_NETPORT=y
CONFIG_IP_SET_HASH_NETIFACE=y
CONFIG_IP_SET_LIST_SET=y
CONFIG_IP_VS=y
CONFIG_IP_VS_IPV6=y
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
# CONFIG_IP_VS_PROTO_ESP is not set
CONFIG_IP_VS_PROTO_AH=y
# CONFIG_IP_VS_PROTO_SCTP is not set
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
# CONFIG_IP_VS_WRR is not set
# CONFIG_IP_VS_LC is not set
# CONFIG_IP_VS_WLC is not set
# CONFIG_IP_VS_FO is not set
# CONFIG_IP_VS_OVF is not set
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
# CONFIG_IP_VS_SH is not set
CONFIG_IP_VS_SED=y
CONFIG_IP_VS_NQ=y
#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#
#
# IP: Netfilter Configuration
#
CONFIG_NF_SOCKET_IPV4=y
CONFIG_NF_TABLES_IPV4=y
CONFIG_NFT_CHAIN_ROUTE_IPV4=y
CONFIG_NFT_REJECT_IPV4=y
CONFIG_NFT_DUP_IPV4=y
# CONFIG_NFT_FIB_IPV4 is not set
CONFIG_NF_TABLES_ARP=y
CONFIG_NF_DUP_IPV4=y
CONFIG_NF_LOG_ARP=y
CONFIG_NF_LOG_IPV4=y
CONFIG_NF_REJECT_IPV4=y
# CONFIG_IP_NF_IPTABLES is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_SOCKET_IPV6 is not set
CONFIG_NF_TABLES_IPV6=y
CONFIG_NFT_CHAIN_ROUTE_IPV6=y
CONFIG_NFT_REJECT_IPV6=y
# CONFIG_NFT_DUP_IPV6 is not set
CONFIG_NFT_FIB_IPV6=y
CONFIG_NF_DUP_IPV6=y
CONFIG_NF_REJECT_IPV6=y
CONFIG_NF_LOG_IPV6=y
CONFIG_IP6_NF_IPTABLES=y
# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
CONFIG_IP6_NF_FILTER=y
# CONFIG_IP6_NF_TARGET_REJECT is not set
CONFIG_IP6_NF_MANGLE=y
# CONFIG_IP6_NF_RAW is not set
CONFIG_NF_TABLES_BRIDGE=y
CONFIG_NFT_BRIDGE_META=y
CONFIG_NFT_BRIDGE_REJECT=y
CONFIG_NF_LOG_BRIDGE=y
CONFIG_BRIDGE_NF_EBTABLES=y
CONFIG_BRIDGE_EBT_BROUTE=y
# CONFIG_BRIDGE_EBT_T_FILTER is not set
CONFIG_BRIDGE_EBT_T_NAT=y
# CONFIG_BRIDGE_EBT_802_3 is not set
CONFIG_BRIDGE_EBT_AMONG=y
# CONFIG_BRIDGE_EBT_ARP is not set
CONFIG_BRIDGE_EBT_IP=y
CONFIG_BRIDGE_EBT_IP6=y
CONFIG_BRIDGE_EBT_LIMIT=y
CONFIG_BRIDGE_EBT_MARK=y
CONFIG_BRIDGE_EBT_PKTTYPE=y
# CONFIG_BRIDGE_EBT_STP is not set
CONFIG_BRIDGE_EBT_VLAN=y
# CONFIG_BRIDGE_EBT_ARPREPLY is not set
CONFIG_BRIDGE_EBT_DNAT=y
# CONFIG_BRIDGE_EBT_MARK_T is not set
CONFIG_BRIDGE_EBT_REDIRECT=y
# CONFIG_BRIDGE_EBT_SNAT is not set
CONFIG_BRIDGE_EBT_LOG=y
CONFIG_BRIDGE_EBT_NFLOG=y
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
#
# DCCP Kernel Hacking
#
CONFIG_IP_DCCP_DEBUG=y
CONFIG_IP_SCTP=y
CONFIG_SCTP_DBG_OBJCNT=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
# CONFIG_SCTP_COOKIE_HMAC_MD5 is not set
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=y
# CONFIG_RDS is not set
CONFIG_TIPC=y
# CONFIG_TIPC_MEDIA_UDP is not set
# CONFIG_TIPC_DIAG is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=y
CONFIG_ATM_MPOA=y
CONFIG_ATM_BR2684=y
CONFIG_ATM_BR2684_IPFILTER=y
CONFIG_L2TP=y
CONFIG_L2TP_DEBUGFS=y
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=y
CONFIG_L2TP_ETH=y
CONFIG_STP=y
CONFIG_GARP=y
CONFIG_BRIDGE=y
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_BRIDGE_VLAN_FILTERING is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_VLAN_8021Q_MVRP is not set
CONFIG_DECNET=y
CONFIG_DECNET_ROUTER=y
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_ATALK=y
CONFIG_DEV_APPLETALK=y
CONFIG_IPDDP=y
CONFIG_IPDDP_ENCAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
CONFIG_PHONET=y
# CONFIG_6LOWPAN is not set
CONFIG_IEEE802154=y
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
# CONFIG_IEEE802154_SOCKET is not set
CONFIG_MAC802154=y
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_ATM is not set
CONFIG_NET_SCH_PRIO=y
# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=y
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_CBS=y
CONFIG_NET_SCH_GRED=y
# CONFIG_NET_SCH_DSMARK is not set
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
# CONFIG_NET_SCH_MQPRIO is not set
CONFIG_NET_SCH_CHOKE=y
CONFIG_NET_SCH_QFQ=y
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=y
CONFIG_NET_SCH_FQ=y
CONFIG_NET_SCH_HHF=y
CONFIG_NET_SCH_PIE=y
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_DEFAULT is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
# CONFIG_NET_CLS_FW is not set
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_CLS_BPF=y
CONFIG_NET_CLS_FLOWER=y
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_EMATCH_IPSET=y
# CONFIG_NET_EMATCH_IPT is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=y
CONFIG_BATMAN_ADV=y
CONFIG_BATMAN_ADV_BATMAN_V=y
CONFIG_BATMAN_ADV_BLA=y
# CONFIG_BATMAN_ADV_DAT is not set
# CONFIG_BATMAN_ADV_NC is not set
# CONFIG_BATMAN_ADV_MCAST is not set
# CONFIG_BATMAN_ADV_DEBUGFS is not set
CONFIG_OPENVSWITCH=y
CONFIG_OPENVSWITCH_GRE=y
CONFIG_VSOCKETS=y
CONFIG_VSOCKETS_DIAG=y
CONFIG_VMWARE_VMCI_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS=y
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_NETLINK_DIAG=y
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
CONFIG_MPLS_ROUTING=y
# CONFIG_MPLS_IPTUNNEL is not set
CONFIG_NET_NSH=y
CONFIG_HSR=y
# CONFIG_NET_SWITCHDEV is not set
CONFIG_NET_L3_MASTER_DEV=y
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_STREAM_PARSER=y
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=y
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=y
# CONFIG_ROSE is not set
#
# AX.25 network device drivers
#
CONFIG_MKISS=y
CONFIG_6PACK=y
# CONFIG_BPQETHER is not set
# CONFIG_BAYCOM_SER_FDX is not set
# CONFIG_BAYCOM_SER_HDX is not set
CONFIG_BAYCOM_PAR=y
CONFIG_YAM=y
# CONFIG_CAN is not set
# CONFIG_BT is not set
CONFIG_AF_RXRPC=y
CONFIG_AF_RXRPC_IPV6=y
CONFIG_AF_RXRPC_INJECT_LOSS=y
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
CONFIG_AF_KCM=y
CONFIG_STREAM_PARSER=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
CONFIG_CFG80211_CERTIFICATION_ONUS=y
# CONFIG_CFG80211_REQUIRE_SIGNED_REGDB is not set
# CONFIG_CFG80211_REG_CELLULAR_HINTS is not set
CONFIG_CFG80211_REG_RELAX_NO_IR=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_CRDA_SUPPORT is not set
CONFIG_CFG80211_WEXT=y
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_MINSTREL_VHT is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_NOINLINE=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
CONFIG_MAC80211_MLME_DEBUG=y
# CONFIG_MAC80211_STA_DEBUG is not set
# CONFIG_MAC80211_HT_DEBUG is not set
CONFIG_MAC80211_OCB_DEBUG=y
# CONFIG_MAC80211_IBSS_DEBUG is not set
CONFIG_MAC80211_PS_DEBUG=y
# CONFIG_MAC80211_MPL_DEBUG is not set
# CONFIG_MAC80211_MPATH_DEBUG is not set
CONFIG_MAC80211_MHWMP_DEBUG=y
CONFIG_MAC80211_MESH_SYNC_DEBUG=y
CONFIG_MAC80211_MESH_CSA_DEBUG=y
CONFIG_MAC80211_MESH_PS_DEBUG=y
# CONFIG_MAC80211_TDLS_DEBUG is not set
CONFIG_MAC80211_DEBUG_COUNTERS=y
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_GPIO=y
# CONFIG_NET_9P is not set
CONFIG_CAIF=y
CONFIG_CAIF_DEBUG=y
CONFIG_CAIF_NETDEV=y
CONFIG_CAIF_USB=y
CONFIG_CEPH_LIB=y
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=y
CONFIG_NFC_DIGITAL=y
CONFIG_NFC_NCI=y
CONFIG_NFC_NCI_SPI=y
# CONFIG_NFC_NCI_UART is not set
CONFIG_NFC_HCI=y
# CONFIG_NFC_SHDLC is not set
#
# Near Field Communication (NFC) devices
#
CONFIG_NFC_TRF7970A=y
# CONFIG_NFC_MEI_PHY is not set
CONFIG_NFC_SIM=y
# CONFIG_NFC_FDP is not set
CONFIG_NFC_PN533=y
CONFIG_NFC_PN533_I2C=y
CONFIG_NFC_ST_NCI=y
CONFIG_NFC_ST_NCI_I2C=y
CONFIG_NFC_ST_NCI_SPI=y
CONFIG_NFC_NXP_NCI=y
# CONFIG_NFC_NXP_NCI_I2C is not set
CONFIG_NFC_S3FWRN5=y
CONFIG_NFC_S3FWRN5_I2C=y
CONFIG_NFC_ST95HF=y
CONFIG_PSAMPLE=y
# CONFIG_NET_IFE is not set
CONFIG_LWTUNNEL=y
CONFIG_LWTUNNEL_BPF=y
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_HAVE_EBPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
# CONFIG_ALLOW_DEV_COREDUMP is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_REGMAP_W1=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_IRQ=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
CONFIG_DMA_CMA=y
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_PERCENTAGE=0
# CONFIG_CMA_SIZE_SEL_MBYTES is not set
CONFIG_CMA_SIZE_SEL_PERCENTAGE=y
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
#
# Bus devices
#
CONFIG_CONNECTOR=y
# CONFIG_PROC_EVENTS is not set
CONFIG_MTD=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_AR7_PARTS=y
#
# Partition parsers
#
#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
CONFIG_FTL=y
CONFIG_NFTL=y
CONFIG_NFTL_RW=y
CONFIG_INFTL=y
# CONFIG_RFD_FTL is not set
CONFIG_SSFDC=y
CONFIG_SM_FTL=y
CONFIG_MTD_OOPS=y
# CONFIG_MTD_PARTITIONED_MASTER is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_RAM=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_PLATRAM=y
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
CONFIG_MTD_DATAFLASH=y
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
CONFIG_MTD_DATAFLASH_OTP=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_MCHP23K256=y
CONFIG_MTD_SST25L=y
CONFIG_MTD_SLRAM=y
CONFIG_MTD_PHRAM=y
CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=y
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOCG3=y
CONFIG_BCH_CONST_M=14
CONFIG_BCH_CONST_T=4
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
CONFIG_MTD_ONENAND_OTP=y
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_BCH=y
CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_SM_COMMON=y
CONFIG_MTD_NAND_DENALI=y
CONFIG_MTD_NAND_DENALI_PCI=y
CONFIG_MTD_NAND_GPIO=y
CONFIG_MTD_NAND_RICOH=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
CONFIG_MTD_NAND_DOCG4=y
CONFIG_MTD_NAND_CAFE=y
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
#
# LPDDR & LPDDR2 PCM memory drivers
#
# CONFIG_MTD_LPDDR is not set
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_MT81xx_NOR=y
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
CONFIG_SPI_INTEL_SPI=y
CONFIG_SPI_INTEL_SPI_PCI=y
CONFIG_SPI_INTEL_SPI_PLATFORM=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_SERIAL=y
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
CONFIG_PARPORT_AX88796=y
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_CDROM=y
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
# CONFIG_ZRAM is not set
CONFIG_BLK_DEV_DAC960=y
CONFIG_BLK_DEV_UMEM=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_DRBD=y
CONFIG_DRBD_FAULT_INJECTION=y
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_SKD=y
CONFIG_BLK_DEV_SX8=y
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
CONFIG_VIRTIO_BLK_SCSI=y
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set
#
# NVME Support
#
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
CONFIG_NVME_MULTIPATH=y
CONFIG_NVME_FABRICS=y
CONFIG_NVME_RDMA=y
CONFIG_NVME_FC=y
CONFIG_NVME_TARGET=y
# CONFIG_NVME_TARGET_LOOP is not set
CONFIG_NVME_TARGET_RDMA=y
CONFIG_NVME_TARGET_FC=y
# CONFIG_NVME_TARGET_FCLOOP is not set
#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_AD525X_DPOT_SPI=y
CONFIG_DUMMY_IRQ=y
CONFIG_IBM_ASM=y
CONFIG_PHANTOM=y
CONFIG_INTEL_MID_PTI=y
CONFIG_SGI_IOC4=y
# CONFIG_TIFM_CORE is not set
CONFIG_ICS932S401=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
# CONFIG_ISL29020 is not set
CONFIG_SENSORS_TSL2550=y
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
CONFIG_HMC6352=y
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
CONFIG_LATTICE_ECP3_CONFIG=y
# CONFIG_SRAM is not set
CONFIG_PCI_ENDPOINT_TEST=y
CONFIG_MISC_RTSX=y
CONFIG_C2PORT=y
CONFIG_C2PORT_DURAMAR_2150=y
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_AT25 is not set
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
CONFIG_EEPROM_93CX6=y
CONFIG_EEPROM_93XX46=y
# CONFIG_EEPROM_IDT_89HPESX is not set
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
CONFIG_TI_ST=y
CONFIG_SENSORS_LIS3_I2C=y
# CONFIG_ALTERA_STAPL is not set
CONFIG_INTEL_MEI=y
CONFIG_INTEL_MEI_ME=y
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_VMWARE_VMCI=y
#
# Intel MIC & related support
#
#
# Intel MIC Bus Driver
#
CONFIG_INTEL_MIC_BUS=y
#
# SCIF Bus Driver
#
CONFIG_SCIF_BUS=y
#
# VOP Bus Driver
#
CONFIG_VOP_BUS=y
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
# CONFIG_SCIF is not set
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
#
# VOP Driver
#
CONFIG_VOP=y
CONFIG_VHOST_RING=y
# CONFIG_GENWQE is not set
CONFIG_ECHO=y
CONFIG_MISC_RTSX_PCI=y
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_IDE_GD_ATAPI=y
CONFIG_BLK_DEV_IDECS=y
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS is not set
CONFIG_BLK_DEV_IDETAPE=y
# CONFIG_BLK_DEV_IDEACPI is not set
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_PLATFORM=y
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_OFFBOARD=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_ATIIXP=y
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_TRIFLEX=y
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
CONFIG_BLK_DEV_IT8213=y
CONFIG_BLK_DEV_IT821X=y
CONFIG_BLK_DEV_NS87415=y
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
CONFIG_BLK_DEV_TRM290=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_BLK_DEV_TC86C001=y
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_MQ_DEFAULT=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
# CONFIG_SCSI_DH_HP_SW is not set
CONFIG_SCSI_DH_EMC=y
CONFIG_SCSI_DH_ALUA=y
CONFIG_SCSI_OSD_INITIATOR=y
CONFIG_SCSI_OSD_ULD=y
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
CONFIG_ATA=y
# CONFIG_ATA_VERBOSE_ERROR is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=y
CONFIG_SATA_SIL24=y
# CONFIG_ATA_SFF is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NTB_NETDEV is not set
# CONFIG_RIONET is not set
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_VIRTIO_NET is not set
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
# CONFIG_ATM_TCP is not set
# CONFIG_ATM_LANAI is not set
# CONFIG_ATM_ENI is not set
# CONFIG_ATM_FIRESTREAM is not set
# CONFIG_ATM_ZATM is not set
# CONFIG_ATM_NICSTAR is not set
# CONFIG_ATM_IDT77252 is not set
# CONFIG_ATM_AMBASSADOR is not set
# CONFIG_ATM_HORIZON is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
# CONFIG_ATM_HE is not set
# CONFIG_ATM_SOLOS is not set
#
# CAIF transport drivers
#
# CONFIG_CAIF_TTY is not set
# CONFIG_CAIF_SPI_SLAVE is not set
# CONFIG_CAIF_HSI is not set
# CONFIG_CAIF_VIRTIO is not set
#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
CONFIG_MDIO=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
# CONFIG_ENA_ETHERNET is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_AMD_XGBE is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_AQTION is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
CONFIG_CAVIUM_PTP=y
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_FUJITSU=y
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_HINIC is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
CONFIG_E1000=y
CONFIG_E1000E=y
CONFIG_E1000E_HWTS=y
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
CONFIG_IXGBE=y
CONFIG_IXGBE_HWMON=y
# CONFIG_IXGBE_DCB is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_ICE is not set
# CONFIG_FM10K is not set
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX5_CORE is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROCHIP=y
# CONFIG_ENC28J60 is not set
# CONFIG_ENCX24J600 is not set
# CONFIG_LAN743X is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_NI=y
CONFIG_NET_VENDOR_8390=y
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_PCMCIA_PCNET is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_ALE is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
CONFIG_NET_VENDOR_XIRCOM=y
# CONFIG_PCMCIA_XIRC2PS is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_MDIO_DEVICE is not set
# CONFIG_PHYLIB is not set
# CONFIG_MICREL_KS8995MA is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
# CONFIG_WIRELESS_WDS is not set
CONFIG_WLAN_VENDOR_ADMTEK=y
# CONFIG_ADM8211 is not set
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH_REG_DYNAMIC_USER_REG_HINTS is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
# CONFIG_ATH9K is not set
# CONFIG_ATH6KL is not set
# CONFIG_WIL6210 is not set
# CONFIG_ATH10K is not set
# CONFIG_WCN36XX is not set
CONFIG_WLAN_VENDOR_ATMEL=y
# CONFIG_ATMEL is not set
CONFIG_WLAN_VENDOR_BROADCOM=y
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMSMAC is not set
# CONFIG_BRCMFMAC is not set
CONFIG_WLAN_VENDOR_CISCO=y
# CONFIG_AIRO_CS is not set
CONFIG_WLAN_VENDOR_INTEL=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_IWLWIFI is not set
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_PRISM54 is not set
CONFIG_WLAN_VENDOR_MARVELL=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_MWIFIEX is not set
# CONFIG_MWL8K is not set
CONFIG_WLAN_VENDOR_MEDIATEK=y
# CONFIG_MT76x2E is not set
CONFIG_WLAN_VENDOR_RALINK=y
# CONFIG_RT2X00 is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
CONFIG_RTL_CARDS=y
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8723AE is not set
# CONFIG_RTL8723BE is not set
# CONFIG_RTL8188EE is not set
# CONFIG_RTL8192EE is not set
# CONFIG_RTL8821AE is not set
CONFIG_WLAN_VENDOR_RSI=y
# CONFIG_RSI_91X is not set
CONFIG_WLAN_VENDOR_ST=y
# CONFIG_CW1200 is not set
CONFIG_WLAN_VENDOR_TI=y
# CONFIG_WL1251 is not set
# CONFIG_WL12XX is not set
# CONFIG_WL18XX is not set
# CONFIG_WLCORE is not set
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_QTNFMAC_PEARL_PCIE is not set
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_MAC80211_HWSIM is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
CONFIG_IEEE802154_DRIVERS=y
# CONFIG_IEEE802154_FAKELB is not set
# CONFIG_IEEE802154_AT86RF230 is not set
# CONFIG_IEEE802154_MRF24J40 is not set
# CONFIG_IEEE802154_CC2520 is not set
# CONFIG_IEEE802154_ADF7242 is not set
# CONFIG_IEEE802154_CA8210 is not set
# CONFIG_IEEE802154_MCR20A is not set
# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_THUNDERBOLT_NET is not set
# CONFIG_NETDEVSIM is not set
# CONFIG_ISDN is not set
CONFIG_NVM=y
CONFIG_NVM_DEBUG=y
CONFIG_NVM_PBLK=y
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
# CONFIG_INPUT_SPARSEKMAP is not set
CONFIG_INPUT_MATRIXKMAP=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADC=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ADP5589=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_QT1070=y
# CONFIG_KEYBOARD_QT2160 is not set
CONFIG_KEYBOARD_DLINK_DIR685=y
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_GPIO_POLLED=y
CONFIG_KEYBOARD_TCA6416=y
# CONFIG_KEYBOARD_TCA8418 is not set
CONFIG_KEYBOARD_MATRIX=y
# CONFIG_KEYBOARD_LM8323 is not set
CONFIG_KEYBOARD_LM8333=y
CONFIG_KEYBOARD_MAX7359=y
CONFIG_KEYBOARD_MCS=y
CONFIG_KEYBOARD_MPR121=y
CONFIG_KEYBOARD_NEWTON=y
CONFIG_KEYBOARD_OPENCORES=y
CONFIG_KEYBOARD_SAMSUNG=y
CONFIG_KEYBOARD_GOLDFISH_EVENTS=y
CONFIG_KEYBOARD_STOWAWAY=y
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_TM2_TOUCHKEY=y
CONFIG_KEYBOARD_XTKBD=y
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_CYAPA=y
CONFIG_MOUSE_ELAN_I2C=y
CONFIG_MOUSE_ELAN_I2C_I2C=y
CONFIG_MOUSE_ELAN_I2C_SMBUS=y
CONFIG_MOUSE_VSXXXAA=y
CONFIG_MOUSE_GPIO=y
CONFIG_MOUSE_SYNAPTICS_I2C=y
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
CONFIG_RMI4_CORE=y
# CONFIG_RMI4_I2C is not set
# CONFIG_RMI4_SPI is not set
CONFIG_RMI4_SMB=y
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
# CONFIG_RMI4_F55 is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_SERIO_ALTERA_PS2=y
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_ARC_PS2=y
# CONFIG_SERIO_GPIO_PS2 is not set
CONFIG_USERIO=y
CONFIG_GAMEPORT=y
CONFIG_GAMEPORT_NS558=y
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=y
CONFIG_GAMEPORT_FM801=y
#
# Character devices
#
CONFIG_TTY=y
# CONFIG_VT is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
CONFIG_MOXA_INTELLIO=y
CONFIG_MOXA_SMARTIO=y
# CONFIG_SYNCLINKMP is not set
CONFIG_SYNCLINK_GT=y
CONFIG_NOZOMI=y
# CONFIG_ISI is not set
CONFIG_N_HDLC=y
CONFIG_N_GSM=y
CONFIG_TRACE_ROUTER=y
CONFIG_TRACE_SINK=y
CONFIG_GOLDFISH_TTY=y
CONFIG_GOLDFISH_TTY_EARLY_CONSOLE=y
# CONFIG_DEVMEM is not set
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_FINTEK=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_DMA is not set
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_EXAR is not set
# CONFIG_SERIAL_8250_CS is not set
# CONFIG_SERIAL_8250_MEN_MCB is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_DW is not set
CONFIG_SERIAL_8250_RT288X=y
# CONFIG_SERIAL_8250_LPSS is not set
CONFIG_SERIAL_8250_MID=y
# CONFIG_SERIAL_8250_MOXA is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_MAX310X=y
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
CONFIG_SERIAL_SC16IS7XX_CORE=y
CONFIG_SERIAL_SC16IS7XX=y
CONFIG_SERIAL_SC16IS7XX_I2C=y
CONFIG_SERIAL_SC16IS7XX_SPI=y
CONFIG_SERIAL_ALTERA_JTAGUART=y
# CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE is not set
CONFIG_SERIAL_ALTERA_UART=y
CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4
CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
CONFIG_SERIAL_ALTERA_UART_CONSOLE=y
# CONFIG_SERIAL_IFX6X60 is not set
CONFIG_SERIAL_ARC=y
CONFIG_SERIAL_ARC_CONSOLE=y
CONFIG_SERIAL_ARC_NR_PORTS=1
CONFIG_SERIAL_RP2=y
CONFIG_SERIAL_RP2_NR_UARTS=32
CONFIG_SERIAL_FSL_LPUART=y
# CONFIG_SERIAL_FSL_LPUART_CONSOLE is not set
CONFIG_SERIAL_MEN_Z135=y
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=y
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=y
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PROC_INTERFACE=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
# CONFIG_IPMI_DEVICE_INTERFACE is not set
CONFIG_IPMI_SI=y
CONFIG_IPMI_SSIF=y
CONFIG_IPMI_WATCHDOG=y
# CONFIG_IPMI_POWEROFF is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_VIA=y
# CONFIG_HW_RANDOM_VIRTIO is not set
CONFIG_NVRAM=y
CONFIG_R3964=y
CONFIG_APPLICOM=y
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=y
# CONFIG_CARDMAN_4040 is not set
CONFIG_SCR24X=y
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=y
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y
#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=y
CONFIG_I2C_MUX_LTC4306=y
CONFIG_I2C_MUX_PCA9541=y
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_MUX_REG=y
# CONFIG_I2C_MUX_MLXCPLD is not set
# CONFIG_I2C_HELPER_AUTO is not set
CONFIG_I2C_SMBUS=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD756_S4882=y
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_NFORCE2_S4985=y
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_VIA=y
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_DESIGNWARE_SLAVE=y
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
CONFIG_I2C_EMEV2=y
CONFIG_I2C_GPIO=y
# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
CONFIG_I2C_KEMPLD=y
CONFIG_I2C_OCORES=y
CONFIG_I2C_PCA_PLATFORM=y
CONFIG_I2C_SIMTEC=y
CONFIG_I2C_XILINX=y
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=y
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_TAOS_EVM=y
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_MLXCPLD=y
CONFIG_I2C_SLAVE=y
CONFIG_I2C_SLAVE_EEPROM=y
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_ALTERA=y
CONFIG_SPI_AXI_SPI_ENGINE=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_BUTTERFLY=y
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_LM70_LLP=y
CONFIG_SPI_OC_TINY=y
CONFIG_SPI_PXA2XX=y
CONFIG_SPI_PXA2XX_PCI=y
CONFIG_SPI_ROCKCHIP=y
CONFIG_SPI_SC18IS602=y
# CONFIG_SPI_XCOMM is not set
CONFIG_SPI_XILINX=y
CONFIG_SPI_ZYNQMP_GQSPI=y
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
CONFIG_SPMI=y
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
CONFIG_PPS_CLIENT_KTIMER=y
CONFIG_PPS_CLIENT_LDISC=y
# CONFIG_PPS_CLIENT_PARPORT is not set
CONFIG_PPS_CLIENT_GPIO=y
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_KVM=y
# CONFIG_PINCTRL is not set
CONFIG_GPIOLIB=y
CONFIG_GPIO_ACPI=y
CONFIG_GPIOLIB_IRQCHIP=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_MAX730X=y
#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_ICH=y
# CONFIG_GPIO_LYNXPOINT is not set
CONFIG_GPIO_MB86S7X=y
CONFIG_GPIO_MENZ127=y
# CONFIG_GPIO_MOCKUP is not set
CONFIG_GPIO_VX855=y
#
# Port-mapped I/O GPIO drivers
#
CONFIG_GPIO_F7188X=y
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
CONFIG_GPIO_WINBOND=y
# CONFIG_GPIO_WS16C48 is not set
#
# I2C GPIO expanders
#
CONFIG_GPIO_ADP5588=y
CONFIG_GPIO_ADP5588_IRQ=y
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_MAX732X_IRQ=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_PCF857X=y
# CONFIG_GPIO_TPIC2810 is not set
#
# MFD GPIO expanders
#
# CONFIG_GPIO_ARIZONA is not set
CONFIG_GPIO_BD9571MWV=y
# CONFIG_GPIO_DA9052 is not set
CONFIG_GPIO_DA9055=y
# CONFIG_GPIO_JANZ_TTL is not set
CONFIG_GPIO_KEMPLD=y
CONFIG_GPIO_LP3943=y
CONFIG_GPIO_MSIC=y
CONFIG_GPIO_TPS65086=y
# CONFIG_GPIO_TPS6586X is not set
CONFIG_GPIO_TPS65910=y
# CONFIG_GPIO_UCB1400 is not set
CONFIG_GPIO_WM831X=y
CONFIG_GPIO_WM8994=y
#
# PCI GPIO expanders
#
CONFIG_GPIO_AMD8111=y
CONFIG_GPIO_BT8XX=y
# CONFIG_GPIO_INTEL_MID is not set
# CONFIG_GPIO_MERRIFIELD is not set
# CONFIG_GPIO_ML_IOH is not set
CONFIG_GPIO_PCI_IDIO_16=y
# CONFIG_GPIO_PCIE_IDIO_24 is not set
CONFIG_GPIO_RDC321X=y
#
# SPI GPIO expanders
#
CONFIG_GPIO_MAX3191X=y
# CONFIG_GPIO_MAX7301 is not set
CONFIG_GPIO_MC33880=y
CONFIG_GPIO_PISOSR=y
# CONFIG_GPIO_XRA1403 is not set
CONFIG_W1=y
# CONFIG_W1_CON is not set
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_DS1WM=y
CONFIG_W1_MASTER_GPIO=y
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
CONFIG_W1_SLAVE_DS2405=y
CONFIG_W1_SLAVE_DS2408=y
CONFIG_W1_SLAVE_DS2408_READBACK=y
CONFIG_W1_SLAVE_DS2413=y
CONFIG_W1_SLAVE_DS2406=y
# CONFIG_W1_SLAVE_DS2423 is not set
CONFIG_W1_SLAVE_DS2805=y
CONFIG_W1_SLAVE_DS2431=y
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2438=y
# CONFIG_W1_SLAVE_DS2760 is not set
CONFIG_W1_SLAVE_DS2780=y
CONFIG_W1_SLAVE_DS2781=y
# CONFIG_W1_SLAVE_DS28E04 is not set
CONFIG_W1_SLAVE_DS28E17=y
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_GENERIC_ADC_BATTERY is not set
# CONFIG_WM831X_BACKUP is not set
CONFIG_WM831X_POWER=y
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
CONFIG_BATTERY_DS2781=y
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=y
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
CONFIG_BATTERY_DA9030=y
CONFIG_BATTERY_DA9052=y
CONFIG_CHARGER_AXP20X=y
# CONFIG_BATTERY_AXP20X is not set
CONFIG_AXP20X_POWER=y
CONFIG_AXP288_FUEL_GAUGE=y
CONFIG_BATTERY_MAX17040=y
# CONFIG_BATTERY_MAX17042 is not set
CONFIG_BATTERY_MAX1721X=y
CONFIG_CHARGER_PCF50633=y
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
CONFIG_CHARGER_GPIO=y
CONFIG_CHARGER_MANAGER=y
CONFIG_CHARGER_LTC3651=y
# CONFIG_CHARGER_MAX14577 is not set
CONFIG_CHARGER_MAX77693=y
# CONFIG_CHARGER_MAX8997 is not set
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24190=y
# CONFIG_CHARGER_BQ24257 is not set
CONFIG_CHARGER_BQ24735=y
CONFIG_CHARGER_BQ25890=y
CONFIG_CHARGER_SMB347=y
CONFIG_CHARGER_TPS65090=y
CONFIG_BATTERY_GAUGE_LTC2941=y
CONFIG_BATTERY_GOLDFISH=y
CONFIG_BATTERY_RT5033=y
# CONFIG_CHARGER_RT9455 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
CONFIG_SENSORS_AD7314=y
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=y
CONFIG_SENSORS_ADM1021=y
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
CONFIG_SENSORS_ADM1029=y
CONFIG_SENSORS_ADM1031=y
CONFIG_SENSORS_ADM9240=y
CONFIG_SENSORS_ADT7X10=y
CONFIG_SENSORS_ADT7310=y
CONFIG_SENSORS_ADT7410=y
# CONFIG_SENSORS_ADT7411 is not set
CONFIG_SENSORS_ADT7462=y
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_ASC7621=y
CONFIG_SENSORS_K8TEMP=y
CONFIG_SENSORS_K10TEMP=y
CONFIG_SENSORS_APPLESMC=y
CONFIG_SENSORS_ASB100=y
CONFIG_SENSORS_ASPEED=y
# CONFIG_SENSORS_ATXP1 is not set
CONFIG_SENSORS_DS620=y
CONFIG_SENSORS_DS1621=y
CONFIG_SENSORS_DELL_SMM=y
CONFIG_SENSORS_DA9052_ADC=y
CONFIG_SENSORS_DA9055=y
CONFIG_SENSORS_I5K_AMB=y
CONFIG_SENSORS_F71805F=y
CONFIG_SENSORS_F71882FG=y
CONFIG_SENSORS_F75375S=y
# CONFIG_SENSORS_MC13783_ADC is not set
# CONFIG_SENSORS_FSCHMD is not set
CONFIG_SENSORS_GL518SM=y
CONFIG_SENSORS_GL520SM=y
CONFIG_SENSORS_G760A=y
CONFIG_SENSORS_G762=y
CONFIG_SENSORS_HIH6130=y
CONFIG_SENSORS_IBMAEM=y
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_IIO_HWMON is not set
CONFIG_SENSORS_I5500=y
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_JC42=y
CONFIG_SENSORS_POWR1220=y
CONFIG_SENSORS_LINEAGE=y
# CONFIG_SENSORS_LTC2945 is not set
CONFIG_SENSORS_LTC2990=y
# CONFIG_SENSORS_LTC4151 is not set
CONFIG_SENSORS_LTC4215=y
CONFIG_SENSORS_LTC4222=y
CONFIG_SENSORS_LTC4245=y
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX16065 is not set
CONFIG_SENSORS_MAX1619=y
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
CONFIG_SENSORS_MAX31722=y
CONFIG_SENSORS_MAX6621=y
# CONFIG_SENSORS_MAX6639 is not set
CONFIG_SENSORS_MAX6642=y
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_MAX6697=y
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
CONFIG_SENSORS_TC654=y
CONFIG_SENSORS_MENF21BMC_HWMON=y
CONFIG_SENSORS_ADCXX=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM70=y
CONFIG_SENSORS_LM73=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=y
CONFIG_SENSORS_LM78=y
CONFIG_SENSORS_LM80=y
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
CONFIG_SENSORS_LM87=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
CONFIG_SENSORS_LM93=y
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_LM95245=y
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_NTC_THERMISTOR is not set
CONFIG_SENSORS_NCT6683=y
CONFIG_SENSORS_NCT6775=y
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
CONFIG_SENSORS_PCF8591=y
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=y
CONFIG_SENSORS_SHT3x=y
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=y
CONFIG_SENSORS_DME1737=y
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
CONFIG_SENSORS_SMSC47M1=y
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_STTS751=y
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=y
# CONFIG_SENSORS_ADS7828 is not set
CONFIG_SENSORS_ADS7871=y
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
CONFIG_SENSORS_INA2XX=y
# CONFIG_SENSORS_INA3221 is not set
CONFIG_SENSORS_TC74=y
CONFIG_SENSORS_THMC50=y
CONFIG_SENSORS_TMP102=y
# CONFIG_SENSORS_TMP103 is not set
CONFIG_SENSORS_TMP108=y
CONFIG_SENSORS_TMP401=y
CONFIG_SENSORS_TMP421=y
CONFIG_SENSORS_VIA_CPUTEMP=y
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_VT1211=y
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=y
# CONFIG_SENSORS_W83791D is not set
CONFIG_SENSORS_W83792D=y
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
CONFIG_SENSORS_W83L786NG=y
CONFIG_SENSORS_W83627HF=y
CONFIG_SENSORS_W83627EHF=y
# CONFIG_SENSORS_WM831X is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
# CONFIG_THERMAL_HWMON is not set
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
# CONFIG_CLOCK_THERMAL is not set
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set
CONFIG_X86_PKG_TEMP_THERMAL=y
CONFIG_INTEL_SOC_DTS_IOSF_CORE=y
CONFIG_INTEL_SOC_DTS_THERMAL=y
#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_GENERIC_ADC_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
# CONFIG_SSB_SDIOHOST is not set
CONFIG_SSB_SILENT=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
CONFIG_MFD_AS3711=y
# CONFIG_PMIC_ADP5520 is not set
CONFIG_MFD_AAT2870_CORE=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_BD9571MWV=y
CONFIG_MFD_AXP20X=y
CONFIG_MFD_AXP20X_I2C=y
# CONFIG_MFD_CROS_EC is not set
CONFIG_PMIC_DA903X=y
CONFIG_PMIC_DA9052=y
CONFIG_MFD_DA9052_SPI=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_MFD_DA9055=y
CONFIG_MFD_DA9062=y
CONFIG_MFD_DA9063=y
# CONFIG_MFD_DA9150 is not set
CONFIG_MFD_MC13XXX=y
CONFIG_MFD_MC13XXX_SPI=y
CONFIG_MFD_MC13XXX_I2C=y
CONFIG_HTC_PASIC3=y
CONFIG_HTC_I2CPLD=y
CONFIG_MFD_INTEL_QUARK_I2C_GPIO=y
CONFIG_LPC_ICH=y
# CONFIG_LPC_SCH is not set
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
CONFIG_MFD_INTEL_MSIC=y
CONFIG_MFD_JANZ_CMODIO=y
CONFIG_MFD_KEMPLD=y
CONFIG_MFD_88PM800=y
CONFIG_MFD_88PM805=y
# CONFIG_MFD_88PM860X is not set
CONFIG_MFD_MAX14577=y
CONFIG_MFD_MAX77693=y
CONFIG_MFD_MAX77843=y
CONFIG_MFD_MAX8907=y
# CONFIG_MFD_MAX8925 is not set
CONFIG_MFD_MAX8997=y
CONFIG_MFD_MAX8998=y
CONFIG_MFD_MT6397=y
CONFIG_MFD_MENF21BMC=y
# CONFIG_EZX_PCAP is not set
CONFIG_MFD_RETU=y
CONFIG_MFD_PCF50633=y
CONFIG_PCF50633_ADC=y
# CONFIG_PCF50633_GPIO is not set
CONFIG_UCB1400_CORE=y
CONFIG_MFD_RDC321X=y
CONFIG_MFD_RT5033=y
# CONFIG_MFD_RC5T583 is not set
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_SI476X_CORE=y
# CONFIG_MFD_SM501 is not set
CONFIG_MFD_SKY81452=y
CONFIG_MFD_SMSC=y
# CONFIG_ABX500_CORE is not set
CONFIG_MFD_SYSCON=y
CONFIG_MFD_TI_AM335X_TSCADC=y
CONFIG_MFD_LP3943=y
# CONFIG_MFD_LP8788 is not set
CONFIG_MFD_TI_LMU=y
# CONFIG_MFD_PALMAS is not set
CONFIG_TPS6105X=y
# CONFIG_TPS65010 is not set
CONFIG_TPS6507X=y
CONFIG_MFD_TPS65086=y
CONFIG_MFD_TPS65090=y
# CONFIG_MFD_TPS68470 is not set
# CONFIG_MFD_TI_LP873X is not set
CONFIG_MFD_TPS6586X=y
CONFIG_MFD_TPS65910=y
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
CONFIG_MFD_WL1273_CORE=y
CONFIG_MFD_LM3533=y
CONFIG_MFD_VX855=y
CONFIG_MFD_ARIZONA=y
CONFIG_MFD_ARIZONA_I2C=y
CONFIG_MFD_ARIZONA_SPI=y
CONFIG_MFD_CS47L24=y
# CONFIG_MFD_WM5102 is not set
CONFIG_MFD_WM5110=y
CONFIG_MFD_WM8997=y
CONFIG_MFD_WM8998=y
CONFIG_MFD_WM8400=y
CONFIG_MFD_WM831X=y
# CONFIG_MFD_WM831X_I2C is not set
CONFIG_MFD_WM831X_SPI=y
# CONFIG_MFD_WM8350_I2C is not set
CONFIG_MFD_WM8994=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_DEBUG=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
# CONFIG_REGULATOR_88PG86X is not set
CONFIG_REGULATOR_88PM800=y
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_AD5398=y
# CONFIG_REGULATOR_ANATOP is not set
CONFIG_REGULATOR_AAT2870=y
CONFIG_REGULATOR_ARIZONA_LDO1=y
CONFIG_REGULATOR_ARIZONA_MICSUPP=y
CONFIG_REGULATOR_AS3711=y
CONFIG_REGULATOR_AXP20X=y
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_BD9571MWV=y
# CONFIG_REGULATOR_DA903X is not set
CONFIG_REGULATOR_DA9052=y
CONFIG_REGULATOR_DA9055=y
CONFIG_REGULATOR_DA9062=y
# CONFIG_REGULATOR_DA9063 is not set
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
# CONFIG_REGULATOR_FAN53555 is not set
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_ISL9305=y
# CONFIG_REGULATOR_ISL6271A is not set
CONFIG_REGULATOR_LM363X=y
CONFIG_REGULATOR_LP3971=y
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=y
CONFIG_REGULATOR_LP8755=y
# CONFIG_REGULATOR_LTC3589 is not set
CONFIG_REGULATOR_LTC3676=y
CONFIG_REGULATOR_MAX14577=y
CONFIG_REGULATOR_MAX1586=y
# CONFIG_REGULATOR_MAX8649 is not set
# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_MAX8907=y
CONFIG_REGULATOR_MAX8952=y
CONFIG_REGULATOR_MAX8997=y
# CONFIG_REGULATOR_MAX8998 is not set
CONFIG_REGULATOR_MAX77693=y
CONFIG_REGULATOR_MC13XXX_CORE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
# CONFIG_REGULATOR_MT6311 is not set
# CONFIG_REGULATOR_MT6323 is not set
CONFIG_REGULATOR_MT6397=y
CONFIG_REGULATOR_PCF50633=y
CONFIG_REGULATOR_PFUZE100=y
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
# CONFIG_REGULATOR_PV88090 is not set
CONFIG_REGULATOR_PWM=y
# CONFIG_REGULATOR_QCOM_SPMI is not set
CONFIG_REGULATOR_RT5033=y
CONFIG_REGULATOR_S2MPA01=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_REGULATOR_SKY81452=y
CONFIG_REGULATOR_TPS51632=y
# CONFIG_REGULATOR_TPS6105X is not set
# CONFIG_REGULATOR_TPS62360 is not set
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
# CONFIG_REGULATOR_TPS65086 is not set
CONFIG_REGULATOR_TPS65090=y
# CONFIG_REGULATOR_TPS65132 is not set
# CONFIG_REGULATOR_TPS6524X is not set
CONFIG_REGULATOR_TPS6586X=y
# CONFIG_REGULATOR_TPS65910 is not set
# CONFIG_REGULATOR_WM831X is not set
CONFIG_REGULATOR_WM8400=y
# CONFIG_REGULATOR_WM8994 is not set
CONFIG_RC_CORE=y
CONFIG_RC_MAP=y
# CONFIG_LIRC is not set
CONFIG_RC_DECODERS=y
# CONFIG_IR_NEC_DECODER is not set
CONFIG_IR_RC5_DECODER=y
CONFIG_IR_RC6_DECODER=y
CONFIG_IR_JVC_DECODER=y
CONFIG_IR_SONY_DECODER=y
CONFIG_IR_SANYO_DECODER=y
CONFIG_IR_SHARP_DECODER=y
# CONFIG_IR_MCE_KBD_DECODER is not set
CONFIG_IR_XMP_DECODER=y
CONFIG_IR_IMON_DECODER=y
# CONFIG_RC_DEVICES is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_VGA_ARB is not set
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_DP_AUX_CHARDEV=y
CONFIG_DRM_DEBUG_MM=y
CONFIG_DRM_DEBUG_MM_SELFTEST=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
CONFIG_DRM_TTM=y
CONFIG_DRM_VM=y
CONFIG_DRM_SCHED=y
#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=y
CONFIG_DRM_I2C_SIL164=y
# CONFIG_DRM_I2C_NXP_TDA998X is not set
CONFIG_DRM_RADEON=y
CONFIG_DRM_RADEON_USERPTR=y
CONFIG_DRM_AMDGPU=y
# CONFIG_DRM_AMDGPU_SI is not set
# CONFIG_DRM_AMDGPU_CIK is not set
# CONFIG_DRM_AMDGPU_USERPTR is not set
CONFIG_DRM_AMDGPU_GART_DEBUGFS=y
#
# ACP (Audio CoProcessor) Configuration
#
# CONFIG_DRM_AMD_ACP is not set
#
# Display Engine Configuration
#
# CONFIG_DRM_AMD_DC is not set
CONFIG_DRM_AMD_DC_PRE_VEGA=y
#
# AMD Library routines
#
CONFIG_CHASH=y
CONFIG_CHASH_STATS=y
# CONFIG_CHASH_SELFTEST is not set
CONFIG_DRM_NOUVEAU=y
CONFIG_NOUVEAU_DEBUG=5
CONFIG_NOUVEAU_DEBUG_DEFAULT=3
CONFIG_NOUVEAU_DEBUG_MMU=y
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
# CONFIG_DRM_I915 is not set
CONFIG_DRM_VGEM=y
CONFIG_DRM_VMWGFX=y
CONFIG_DRM_VMWGFX_FBCON=y
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
CONFIG_DRM_CIRRUS_QEMU=y
# CONFIG_DRM_QXL is not set
CONFIG_DRM_BOCHS=y
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM_PANEL=y
#
# Display Panels
#
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
CONFIG_DRM_ANALOGIX_ANX78XX=y
CONFIG_HSA_AMD=y
CONFIG_DRM_HISI_HIBMC=y
# CONFIG_DRM_TINYDRM is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
CONFIG_DRM_LIB_RANDOM=y
#
# Frame buffer Devices
#
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
CONFIG_FB_FOREIGN_ENDIAN=y
# CONFIG_FB_BOTH_ENDIAN is not set
CONFIG_FB_BIG_ENDIAN=y
# CONFIG_FB_LITTLE_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=y
CONFIG_FB_PM2=y
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
CONFIG_FB_CYBER2000=y
CONFIG_FB_CYBER2000_DDC=y
CONFIG_FB_ARC=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_N411 is not set
CONFIG_FB_HGA=y
CONFIG_FB_OPENCORES=y
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
# CONFIG_FB_NVIDIA_BACKLIGHT is not set
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_RIVA_BACKLIGHT is not set
# CONFIG_FB_I740 is not set
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_MATROX=y
# CONFIG_FB_MATROX_MILLENIUM is not set
# CONFIG_FB_MATROX_MYSTIQUE is not set
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=y
CONFIG_FB_MATROX_MAVEN=y
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=y
CONFIG_FB_ATY128_BACKLIGHT=y
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=y
# CONFIG_FB_S3_DDC is not set
CONFIG_FB_SAVAGE=y
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=y
CONFIG_FB_SIS_300=y
# CONFIG_FB_SIS_315 is not set
CONFIG_FB_VIA=y
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
CONFIG_FB_VIA_X_COMPATIBILITY=y
CONFIG_FB_NEOMAGIC=y
CONFIG_FB_KYRO=y
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=y
CONFIG_FB_VT8623=y
# CONFIG_FB_TRIDENT is not set
CONFIG_FB_ARK=y
CONFIG_FB_PM3=y
# CONFIG_FB_CARMINE is not set
CONFIG_FB_IBM_GXT4500=y
CONFIG_FB_GOLDFISH=y
# CONFIG_FB_VIRTUAL is not set
CONFIG_FB_METRONOME=y
# CONFIG_FB_MB862XX is not set
CONFIG_FB_BROADSHEET=y
# CONFIG_FB_AUO_K190X is not set
CONFIG_FB_SIMPLE=y
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
# CONFIG_LCD_L4F00242T03 is not set
CONFIG_LCD_LMS283GF05=y
CONFIG_LCD_LTV350QV=y
CONFIG_LCD_ILI922X=y
CONFIG_LCD_ILI9320=y
CONFIG_LCD_TDO24M=y
CONFIG_LCD_VGG2432A4=y
CONFIG_LCD_PLATFORM=y
CONFIG_LCD_S6E63M0=y
CONFIG_LCD_LD9040=y
# CONFIG_LCD_AMS369FG06 is not set
CONFIG_LCD_LMS501KF03=y
CONFIG_LCD_HX8357=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_LM3533=y
CONFIG_BACKLIGHT_CARILLO_RANCH=y
# CONFIG_BACKLIGHT_PWM is not set
CONFIG_BACKLIGHT_DA903X=y
# CONFIG_BACKLIGHT_DA9052 is not set
# CONFIG_BACKLIGHT_APPLE is not set
CONFIG_BACKLIGHT_PM8941_WLED=y
CONFIG_BACKLIGHT_SAHARA=y
# CONFIG_BACKLIGHT_WM831X is not set
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
CONFIG_BACKLIGHT_PCF50633=y
CONFIG_BACKLIGHT_AAT2870=y
CONFIG_BACKLIGHT_LM3630A=y
# CONFIG_BACKLIGHT_LM3639 is not set
CONFIG_BACKLIGHT_LP855X=y
CONFIG_BACKLIGHT_SKY81452=y
CONFIG_BACKLIGHT_AS3711=y
CONFIG_BACKLIGHT_GPIO=y
CONFIG_BACKLIGHT_LV5207LP=y
# CONFIG_BACKLIGHT_BD6107 is not set
CONFIG_BACKLIGHT_ARCXCNN=y
CONFIG_VGASTATE=y
CONFIG_HDMI=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_DMAENGINE_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_COMPRESS_OFFLOAD=y
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_OSSEMUL is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_VERBOSE=y
CONFIG_SND_PCM_XRUN_DEBUG=y
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_VX_LIB=y
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_PCI is not set
#
# HD-Audio
#
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_SPI is not set
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=y
CONFIG_SND_PDAUDIOCF=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_AC97_BUS=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_COMPRESS=y
CONFIG_SND_SOC_ACPI=y
CONFIG_SND_SOC_AMD_ACP=y
CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=y
# CONFIG_SND_SOC_AMD_CZ_RT5645_MACH is not set
CONFIG_SND_ATMEL_SOC=y
# CONFIG_SND_DESIGNWARE_I2S is not set
#
# SoC Audio for Freescale CPUs
#
#
# Common SoC Audio options for Freescale CPUs:
#
CONFIG_SND_SOC_FSL_ASRC=y
# CONFIG_SND_SOC_FSL_SAI is not set
CONFIG_SND_SOC_FSL_SSI=y
CONFIG_SND_SOC_FSL_SPDIF=y
CONFIG_SND_SOC_FSL_ESAI=y
# CONFIG_SND_SOC_IMX_AUDMUX is not set
# CONFIG_SND_I2S_HI6210_I2S is not set
# CONFIG_SND_SOC_IMG is not set
CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
CONFIG_SND_SST_IPC=y
CONFIG_SND_SST_IPC_PCI=y
CONFIG_SND_SST_IPC_ACPI=y
# CONFIG_SND_SOC_INTEL_HASWELL is not set
# CONFIG_SND_SOC_INTEL_BAYTRAIL is not set
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=y
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI=y
CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=y
# CONFIG_SND_SOC_INTEL_SKYLAKE is not set
CONFIG_SND_SOC_ACPI_INTEL_MATCH=y
CONFIG_SND_SOC_INTEL_MACH=y
#
# STMicroelectronics STM32 SOC audio support
#
CONFIG_SND_SOC_XTFPGA_I2S=y
CONFIG_ZX_TDM=y
CONFIG_SND_SOC_I2C_AND_SPI=y
#
# CODEC drivers
#
CONFIG_SND_SOC_AC97_CODEC=y
CONFIG_SND_SOC_ADAU_UTILS=y
CONFIG_SND_SOC_ADAU1701=y
CONFIG_SND_SOC_ADAU17X1=y
CONFIG_SND_SOC_ADAU1761=y
CONFIG_SND_SOC_ADAU1761_I2C=y
CONFIG_SND_SOC_ADAU1761_SPI=y
CONFIG_SND_SOC_ADAU7002=y
CONFIG_SND_SOC_AK4104=y
CONFIG_SND_SOC_AK4458=y
CONFIG_SND_SOC_AK4554=y
# CONFIG_SND_SOC_AK4613 is not set
# CONFIG_SND_SOC_AK4642 is not set
CONFIG_SND_SOC_AK5386=y
CONFIG_SND_SOC_AK5558=y
# CONFIG_SND_SOC_ALC5623 is not set
CONFIG_SND_SOC_BD28623=y
CONFIG_SND_SOC_BT_SCO=y
# CONFIG_SND_SOC_CS35L32 is not set
CONFIG_SND_SOC_CS35L33=y
# CONFIG_SND_SOC_CS35L34 is not set
CONFIG_SND_SOC_CS35L35=y
CONFIG_SND_SOC_CS42L42=y
CONFIG_SND_SOC_CS42L51=y
CONFIG_SND_SOC_CS42L51_I2C=y
CONFIG_SND_SOC_CS42L52=y
# CONFIG_SND_SOC_CS42L56 is not set
CONFIG_SND_SOC_CS42L73=y
CONFIG_SND_SOC_CS4265=y
CONFIG_SND_SOC_CS4270=y
CONFIG_SND_SOC_CS4271=y
CONFIG_SND_SOC_CS4271_I2C=y
CONFIG_SND_SOC_CS4271_SPI=y
# CONFIG_SND_SOC_CS42XX8_I2C is not set
CONFIG_SND_SOC_CS43130=y
CONFIG_SND_SOC_CS4349=y
CONFIG_SND_SOC_CS53L30=y
CONFIG_SND_SOC_DA7219=y
CONFIG_SND_SOC_DIO2125=y
CONFIG_SND_SOC_ES7134=y
# CONFIG_SND_SOC_ES8316 is not set
CONFIG_SND_SOC_ES8328=y
CONFIG_SND_SOC_ES8328_I2C=y
# CONFIG_SND_SOC_ES8328_SPI is not set
CONFIG_SND_SOC_GTM601=y
# CONFIG_SND_SOC_INNO_RK3036 is not set
CONFIG_SND_SOC_MAX98357A=y
# CONFIG_SND_SOC_MAX98504 is not set
CONFIG_SND_SOC_MAX9867=y
# CONFIG_SND_SOC_MAX98927 is not set
CONFIG_SND_SOC_MAX98373=y
CONFIG_SND_SOC_MAX9860=y
CONFIG_SND_SOC_MSM8916_WCD_ANALOG=y
# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
CONFIG_SND_SOC_PCM1681=y
CONFIG_SND_SOC_PCM1789=y
CONFIG_SND_SOC_PCM1789_I2C=y
CONFIG_SND_SOC_PCM179X=y
CONFIG_SND_SOC_PCM179X_I2C=y
CONFIG_SND_SOC_PCM179X_SPI=y
CONFIG_SND_SOC_PCM186X=y
CONFIG_SND_SOC_PCM186X_I2C=y
CONFIG_SND_SOC_PCM186X_SPI=y
CONFIG_SND_SOC_PCM3168A=y
CONFIG_SND_SOC_PCM3168A_I2C=y
CONFIG_SND_SOC_PCM3168A_SPI=y
CONFIG_SND_SOC_PCM512x=y
CONFIG_SND_SOC_PCM512x_I2C=y
CONFIG_SND_SOC_PCM512x_SPI=y
CONFIG_SND_SOC_RL6231=y
CONFIG_SND_SOC_RT5616=y
# CONFIG_SND_SOC_RT5631 is not set
# CONFIG_SND_SOC_SGTL5000 is not set
CONFIG_SND_SOC_SIGMADSP=y
CONFIG_SND_SOC_SIGMADSP_I2C=y
CONFIG_SND_SOC_SIGMADSP_REGMAP=y
CONFIG_SND_SOC_SIRF_AUDIO_CODEC=y
CONFIG_SND_SOC_SPDIF=y
CONFIG_SND_SOC_SSM2602=y
CONFIG_SND_SOC_SSM2602_SPI=y
CONFIG_SND_SOC_SSM2602_I2C=y
CONFIG_SND_SOC_SSM4567=y
CONFIG_SND_SOC_STA32X=y
# CONFIG_SND_SOC_STA350 is not set
# CONFIG_SND_SOC_STI_SAS is not set
# CONFIG_SND_SOC_TAS2552 is not set
# CONFIG_SND_SOC_TAS5086 is not set
# CONFIG_SND_SOC_TAS571X is not set
CONFIG_SND_SOC_TAS5720=y
# CONFIG_SND_SOC_TAS6424 is not set
CONFIG_SND_SOC_TDA7419=y
CONFIG_SND_SOC_TFA9879=y
CONFIG_SND_SOC_TLV320AIC23=y
# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
CONFIG_SND_SOC_TLV320AIC23_SPI=y
CONFIG_SND_SOC_TLV320AIC31XX=y
CONFIG_SND_SOC_TLV320AIC32X4=y
# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
CONFIG_SND_SOC_TLV320AIC32X4_SPI=y
CONFIG_SND_SOC_TLV320AIC3X=y
CONFIG_SND_SOC_TS3A227E=y
CONFIG_SND_SOC_TSCS42XX=y
CONFIG_SND_SOC_WM8510=y
CONFIG_SND_SOC_WM8523=y
CONFIG_SND_SOC_WM8524=y
# CONFIG_SND_SOC_WM8580 is not set
# CONFIG_SND_SOC_WM8711 is not set
CONFIG_SND_SOC_WM8728=y
CONFIG_SND_SOC_WM8731=y
# CONFIG_SND_SOC_WM8737 is not set
# CONFIG_SND_SOC_WM8741 is not set
CONFIG_SND_SOC_WM8750=y
CONFIG_SND_SOC_WM8753=y
CONFIG_SND_SOC_WM8770=y
CONFIG_SND_SOC_WM8776=y
CONFIG_SND_SOC_WM8804=y
CONFIG_SND_SOC_WM8804_I2C=y
# CONFIG_SND_SOC_WM8804_SPI is not set
# CONFIG_SND_SOC_WM8903 is not set
CONFIG_SND_SOC_WM8960=y
CONFIG_SND_SOC_WM8962=y
CONFIG_SND_SOC_WM8974=y
# CONFIG_SND_SOC_WM8978 is not set
CONFIG_SND_SOC_WM8985=y
CONFIG_SND_SOC_ZX_AUD96P22=y
CONFIG_SND_SOC_MAX9759=y
# CONFIG_SND_SOC_NAU8540 is not set
CONFIG_SND_SOC_NAU8810=y
CONFIG_SND_SOC_NAU8824=y
# CONFIG_SND_SOC_TPA6130A2 is not set
CONFIG_SND_SIMPLE_CARD_UTILS=y
CONFIG_SND_SIMPLE_CARD=y
# CONFIG_SND_X86 is not set
CONFIG_AC97_BUS=y
#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
# CONFIG_HID_GENERIC is not set
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
CONFIG_HID_ACRUX=y
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
# CONFIG_HID_CHERRY is not set
CONFIG_HID_CHICONY=y
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CMEDIA=y
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELECOM=y
# CONFIG_HID_EZKEY is not set
CONFIG_HID_GEMBIRD=y
CONFIG_HID_GFRM=y
CONFIG_HID_KEYTOUCH=y
# CONFIG_HID_KYE is not set
CONFIG_HID_WALTOP=y
CONFIG_HID_GYRATION=y
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
CONFIG_HID_JABRA=y
CONFIG_HID_TWINHAN=y
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LCPOWER=y
CONFIG_HID_LED=y
CONFIG_HID_LENOVO=y
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
CONFIG_HID_LOGITECH_HIDPP=y
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
# CONFIG_LOGIG940_FF is not set
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=y
CONFIG_HID_MAYFLASH=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_MULTITOUCH=y
CONFIG_HID_NTI=y
CONFIG_HID_ORTEK=y
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PRIMAX=y
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SPEEDLINK=y
CONFIG_HID_STEELSERIES=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_RMI=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
CONFIG_HID_WIIMOTE=y
CONFIG_HID_XINMO=y
CONFIG_HID_ZEROPLUS=y
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=y
CONFIG_HID_SENSOR_HUB=y
# CONFIG_HID_SENSOR_CUSTOM_SENSOR is not set
CONFIG_HID_ALPS=y
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
#
# Intel ISH HID support
#
CONFIG_INTEL_ISH_HID=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB is not set
CONFIG_USB_PCI=y
#
# USB port drivers
#
#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_TAHVO_USB is not set
# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
CONFIG_UWB=y
CONFIG_UWB_WHCI=y
CONFIG_MMC=y
# CONFIG_MMC_BLOCK is not set
# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=y
#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
CONFIG_MMC_RICOH_MMC=y
# CONFIG_MMC_SDHCI_ACPI is not set
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_GOLDFISH=y
CONFIG_MMC_SPI=y
CONFIG_MMC_SDRICOH_CS=y
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=y
CONFIG_MMC_USDHI6ROL0=y
# CONFIG_MMC_REALTEK_PCI is not set
CONFIG_MMC_CQHCI=y
CONFIG_MMC_TOSHIBA_PCI=y
# CONFIG_MMC_MTK is not set
CONFIG_MEMSTICK=y
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
CONFIG_MEMSTICK_UNSAFE_RESUME=y
CONFIG_MSPRO_BLOCK=y
CONFIG_MS_BLOCK=y
#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
CONFIG_MEMSTICK_JMICRON_38X=y
# CONFIG_MEMSTICK_R592 is not set
CONFIG_MEMSTICK_REALTEK_PCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_CLASS_FLASH=y
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
#
# LED drivers
#
# CONFIG_LEDS_AS3645A is not set
CONFIG_LEDS_LM3530=y
# CONFIG_LEDS_LM3533 is not set
CONFIG_LEDS_LM3642=y
CONFIG_LEDS_MT6323=y
CONFIG_LEDS_PCA9532=y
# CONFIG_LEDS_PCA9532_GPIO is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
CONFIG_LEDS_LP3952=y
CONFIG_LEDS_LP55XX_COMMON=y
# CONFIG_LEDS_LP5521 is not set
CONFIG_LEDS_LP5523=y
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
CONFIG_LEDS_PCA955X=y
# CONFIG_LEDS_PCA955X_GPIO is not set
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_WM831X_STATUS=y
CONFIG_LEDS_DA903X=y
# CONFIG_LEDS_DA9052 is not set
CONFIG_LEDS_DAC124S085=y
CONFIG_LEDS_PWM=y
# CONFIG_LEDS_REGULATOR is not set
CONFIG_LEDS_BD2802=y
CONFIG_LEDS_LT3593=y
CONFIG_LEDS_MC13783=y
# CONFIG_LEDS_TCA6507 is not set
CONFIG_LEDS_TLC591XX=y
CONFIG_LEDS_MAX8997=y
CONFIG_LEDS_LM355x=y
CONFIG_LEDS_MENF21BMC=y
#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=y
# CONFIG_LEDS_MLXREG is not set
CONFIG_LEDS_USER=y
# CONFIG_LEDS_NIC78BX is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_LEDS_TRIGGER_MTD=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
CONFIG_ACCESSIBILITY=y
CONFIG_INFINIBAND=y
# CONFIG_INFINIBAND_USER_MAD is not set
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_QIB=y
# CONFIG_MLX4_INFINIBAND is not set
CONFIG_INFINIBAND_NES=y
CONFIG_INFINIBAND_NES_DEBUG=y
# CONFIG_INFINIBAND_OCRDMA is not set
# CONFIG_INFINIBAND_IPOIB is not set
# CONFIG_INFINIBAND_SRP is not set
CONFIG_INFINIBAND_ISER=y
CONFIG_INFINIBAND_OPA_VNIC=y
CONFIG_INFINIBAND_RDMAVT=y
CONFIG_RDMA_RXE=y
CONFIG_INFINIBAND_HFI1=y
CONFIG_HFI1_DEBUG_SDMA_ORDER=y
CONFIG_SDMA_VERBOSITY=y
# CONFIG_INFINIBAND_BNXT_RE is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
CONFIG_EDAC_DEBUG=y
CONFIG_EDAC_E752X=y
CONFIG_EDAC_I82975X=y
CONFIG_EDAC_I3000=y
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_IE31200 is not set
CONFIG_EDAC_X38=y
CONFIG_EDAC_I5400=y
CONFIG_EDAC_I7CORE=y
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
# CONFIG_EDAC_PND2 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_ACPI=y
CONFIG_ALTERA_MSGDMA=y
CONFIG_INTEL_IDMA64=y
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_INTEL_MIC_X100_DMA is not set
CONFIG_QCOM_HIDMA_MGMT=y
CONFIG_QCOM_HIDMA=y
# CONFIG_DW_DMAC is not set
# CONFIG_DW_DMAC_PCI is not set
#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
CONFIG_DMATEST=y
CONFIG_DMA_ENGINE_RAID=y
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not set
CONFIG_UIO=y
CONFIG_UIO_CIF=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_DMEM_GENIRQ is not set
# CONFIG_UIO_AEC is not set
CONFIG_UIO_SERCOS3=y
# CONFIG_UIO_PCI_GENERIC is not set
# CONFIG_UIO_NETX is not set
CONFIG_UIO_PRUSS=y
CONFIG_UIO_MF624=y
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
# CONFIG_VIRTIO_MENU is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACER_WIRELESS is not set
# CONFIG_ACERHDF is not set
# CONFIG_ALIENWARE_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_SMBIOS is not set
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_DELL_WMI_LED is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
CONFIG_AMILO_RFKILL=y
# CONFIG_GPD_POCKET_FAN is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WIRELESS is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
CONFIG_SENSORS_HDAPS=y
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ASUS_WMI is not set
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ACPI_WMI=y
CONFIG_WMI_BMOF=y
# CONFIG_INTEL_WMI_THUNDERBOLT is not set
# CONFIG_MSI_WMI is not set
# CONFIG_PEAQ_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_CHT_INT33FE is not set
# CONFIG_INTEL_INT0002_VGPIO is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
CONFIG_INTEL_SCU_IPC=y
# CONFIG_INTEL_SCU_IPC_UTIL is not set
CONFIG_INTEL_MID_POWER_BUTTON=y
CONFIG_INTEL_MFLD_THERMAL=y
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_PMC_CORE is not set
CONFIG_IBM_RTL=y
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_MXM_WMI=y
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_PVPANIC is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_SURFACE_3_BUTTON is not set
CONFIG_INTEL_PUNIT_IPC=y
# CONFIG_MLX_PLATFORM is not set
CONFIG_PMC_ATOM=y
CONFIG_GOLDFISH_BUS=y
CONFIG_GOLDFISH_PIPE=y
CONFIG_CHROME_PLATFORMS=y
CONFIG_CHROMEOS_PSTORE=y
# CONFIG_CROS_KBD_LED_BACKLIGHT is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_WM831X is not set
CONFIG_COMMON_CLK_SI5351=y
CONFIG_COMMON_CLK_SI544=y
CONFIG_COMMON_CLK_CDCE706=y
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_COMMON_CLK_S2MPS11 is not set
CONFIG_COMMON_CLK_PWM=y
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_DW_APB_TIMER=y
CONFIG_MAILBOX=y
# CONFIG_PCC is not set
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
# CONFIG_AMD_IOMMU is not set
# CONFIG_INTEL_IOMMU is not set
# CONFIG_IRQ_REMAP is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
#
# Rpmsg drivers
#
CONFIG_RPMSG=y
# CONFIG_RPMSG_CHAR is not set
CONFIG_RPMSG_QCOM_GLINK_NATIVE=y
CONFIG_RPMSG_QCOM_GLINK_RPM=y
CONFIG_RPMSG_VIRTIO=y
CONFIG_SOUNDWIRE=y
#
# SoundWire Devices
#
# CONFIG_SOUNDWIRE_INTEL is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
#
# Broadcom SoC drivers
#
#
# i.MX SoC drivers
#
#
# Qualcomm SoC drivers
#
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
CONFIG_PM_DEVFREQ=y
#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
CONFIG_DEVFREQ_GOV_USERSPACE=y
CONFIG_DEVFREQ_GOV_PASSIVE=y
#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
CONFIG_EXTCON=y
#
# Extcon Device Drivers
#
CONFIG_EXTCON_ADC_JACK=y
# CONFIG_EXTCON_ARIZONA is not set
# CONFIG_EXTCON_AXP288 is not set
CONFIG_EXTCON_GPIO=y
# CONFIG_EXTCON_INTEL_INT3496 is not set
CONFIG_EXTCON_MAX14577=y
CONFIG_EXTCON_MAX3355=y
CONFIG_EXTCON_MAX77693=y
CONFIG_EXTCON_MAX77843=y
CONFIG_EXTCON_MAX8997=y
# CONFIG_EXTCON_RT8973A is not set
# CONFIG_EXTCON_SM5502 is not set
# CONFIG_EXTCON_USB_GPIO is not set
CONFIG_MEMORY=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=y
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
CONFIG_IIO_SW_DEVICE=y
CONFIG_IIO_SW_TRIGGER=y
CONFIG_IIO_TRIGGERED_EVENT=y
#
# Accelerometers
#
CONFIG_ADXL345=y
CONFIG_ADXL345_I2C=y
CONFIG_ADXL345_SPI=y
CONFIG_BMA180=y
CONFIG_BMA220=y
CONFIG_BMC150_ACCEL=y
CONFIG_BMC150_ACCEL_I2C=y
CONFIG_BMC150_ACCEL_SPI=y
# CONFIG_DA280 is not set
CONFIG_DA311=y
# CONFIG_DMARD09 is not set
# CONFIG_DMARD10 is not set
CONFIG_HID_SENSOR_ACCEL_3D=y
CONFIG_IIO_CROS_EC_ACCEL_LEGACY=y
# CONFIG_KXSD9 is not set
# CONFIG_KXCJK1013 is not set
CONFIG_MC3230=y
CONFIG_MMA7455=y
CONFIG_MMA7455_I2C=y
# CONFIG_MMA7455_SPI is not set
CONFIG_MMA7660=y
CONFIG_MMA8452=y
CONFIG_MMA9551_CORE=y
CONFIG_MMA9551=y
# CONFIG_MMA9553 is not set
CONFIG_MXC4005=y
CONFIG_MXC6255=y
# CONFIG_SCA3000 is not set
CONFIG_STK8312=y
# CONFIG_STK8BA50 is not set
#
# Analog to digital converters
#
CONFIG_AD_SIGMA_DELTA=y
CONFIG_AD7266=y
CONFIG_AD7291=y
CONFIG_AD7298=y
CONFIG_AD7476=y
CONFIG_AD7766=y
CONFIG_AD7791=y
CONFIG_AD7793=y
CONFIG_AD7887=y
CONFIG_AD7923=y
CONFIG_AD799X=y
CONFIG_AXP20X_ADC=y
CONFIG_AXP288_ADC=y
CONFIG_CC10001_ADC=y
CONFIG_HI8435=y
CONFIG_HX711=y
CONFIG_LTC2471=y
CONFIG_LTC2485=y
CONFIG_LTC2497=y
# CONFIG_MAX1027 is not set
CONFIG_MAX11100=y
# CONFIG_MAX1118 is not set
# CONFIG_MAX1363 is not set
# CONFIG_MAX9611 is not set
CONFIG_MCP320X=y
CONFIG_MCP3422=y
CONFIG_MEN_Z188_ADC=y
CONFIG_NAU7802=y
# CONFIG_QCOM_SPMI_IADC is not set
# CONFIG_QCOM_SPMI_VADC is not set
CONFIG_TI_ADC081C=y
# CONFIG_TI_ADC0832 is not set
CONFIG_TI_ADC084S021=y
CONFIG_TI_ADC12138=y
CONFIG_TI_ADC108S102=y
# CONFIG_TI_ADC128S052 is not set
CONFIG_TI_ADC161S626=y
CONFIG_TI_ADS7950=y
CONFIG_TI_AM335X_ADC=y
# CONFIG_TI_TLC4541 is not set
#
# Amplifiers
#
CONFIG_AD8366=y
#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=y
CONFIG_CCS811=y
CONFIG_IAQCORE=y
# CONFIG_VZ89X is not set
#
# Hid Sensor IIO Common
#
CONFIG_HID_SENSOR_IIO_COMMON=y
CONFIG_HID_SENSOR_IIO_TRIGGER=y
CONFIG_IIO_MS_SENSORS_I2C=y
#
# SSP Sensor Common
#
CONFIG_IIO_SSP_SENSORS_COMMONS=y
CONFIG_IIO_SSP_SENSORHUB=y
CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_SPI=y
CONFIG_IIO_ST_SENSORS_CORE=y
#
# Counters
#
#
# Digital to analog converters
#
# CONFIG_AD5064 is not set
CONFIG_AD5360=y
CONFIG_AD5380=y
# CONFIG_AD5421 is not set
CONFIG_AD5446=y
CONFIG_AD5449=y
CONFIG_AD5592R_BASE=y
CONFIG_AD5592R=y
CONFIG_AD5593R=y
# CONFIG_AD5504 is not set
CONFIG_AD5624R_SPI=y
CONFIG_LTC2632=y
CONFIG_AD5686=y
CONFIG_AD5755=y
CONFIG_AD5761=y
CONFIG_AD5764=y
CONFIG_AD5791=y
CONFIG_AD7303=y
# CONFIG_AD8801 is not set
CONFIG_DS4424=y
# CONFIG_M62332 is not set
# CONFIG_MAX517 is not set
CONFIG_MCP4725=y
CONFIG_MCP4922=y
CONFIG_TI_DAC082S085=y
#
# IIO dummy driver
#
CONFIG_IIO_DUMMY_EVGEN=y
CONFIG_IIO_SIMPLE_DUMMY=y
CONFIG_IIO_SIMPLE_DUMMY_EVENTS=y
CONFIG_IIO_SIMPLE_DUMMY_BUFFER=y
#
# Frequency Synthesizers DDS/PLL
#
#
# Clock Generator/Distribution
#
CONFIG_AD9523=y
#
# Phase-Locked Loop (PLL) frequency synthesizers
#
CONFIG_ADF4350=y
#
# Digital gyroscope sensors
#
# CONFIG_ADIS16080 is not set
# CONFIG_ADIS16130 is not set
CONFIG_ADIS16136=y
# CONFIG_ADIS16260 is not set
CONFIG_ADXRS450=y
# CONFIG_BMG160 is not set
# CONFIG_HID_SENSOR_GYRO_3D is not set
CONFIG_MPU3050=y
CONFIG_MPU3050_I2C=y
CONFIG_IIO_ST_GYRO_3AXIS=y
CONFIG_IIO_ST_GYRO_I2C_3AXIS=y
CONFIG_IIO_ST_GYRO_SPI_3AXIS=y
# CONFIG_ITG3200 is not set
#
# Health Sensors
#
#
# Heart Rate Monitors
#
CONFIG_AFE4403=y
# CONFIG_AFE4404 is not set
CONFIG_MAX30100=y
CONFIG_MAX30102=y
#
# Humidity sensors
#
# CONFIG_AM2315 is not set
CONFIG_DHT11=y
# CONFIG_HDC100X is not set
CONFIG_HID_SENSOR_HUMIDITY=y
# CONFIG_HTS221 is not set
CONFIG_HTU21=y
CONFIG_SI7005=y
CONFIG_SI7020=y
#
# Inertial measurement units
#
CONFIG_ADIS16400=y
CONFIG_ADIS16480=y
# CONFIG_BMI160_I2C is not set
# CONFIG_BMI160_SPI is not set
# CONFIG_KMX61 is not set
CONFIG_INV_MPU6050_IIO=y
CONFIG_INV_MPU6050_I2C=y
CONFIG_INV_MPU6050_SPI=y
# CONFIG_IIO_ST_LSM6DSX is not set
CONFIG_IIO_ADIS_LIB=y
CONFIG_IIO_ADIS_LIB_BUFFER=y
#
# Light sensors
#
# CONFIG_ACPI_ALS is not set
CONFIG_ADJD_S311=y
CONFIG_AL3320A=y
CONFIG_APDS9300=y
# CONFIG_APDS9960 is not set
# CONFIG_BH1750 is not set
CONFIG_BH1780=y
# CONFIG_CM32181 is not set
# CONFIG_CM3232 is not set
CONFIG_CM3323=y
CONFIG_CM36651=y
# CONFIG_GP2AP020A00F is not set
# CONFIG_SENSORS_ISL29018 is not set
CONFIG_SENSORS_ISL29028=y
# CONFIG_ISL29125 is not set
# CONFIG_HID_SENSOR_ALS is not set
CONFIG_HID_SENSOR_PROX=y
CONFIG_JSA1212=y
CONFIG_RPR0521=y
CONFIG_SENSORS_LM3533=y
# CONFIG_LTR501 is not set
CONFIG_LV0104CS=y
# CONFIG_MAX44000 is not set
CONFIG_OPT3001=y
CONFIG_PA12203001=y
CONFIG_SI1145=y
CONFIG_STK3310=y
# CONFIG_ST_UVIS25 is not set
CONFIG_TCS3414=y
# CONFIG_TCS3472 is not set
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=y
CONFIG_TSL4531=y
# CONFIG_US5182D is not set
CONFIG_VCNL4000=y
# CONFIG_VEML6070 is not set
# CONFIG_VL6180 is not set
CONFIG_ZOPT2201=y
#
# Magnetometer sensors
#
CONFIG_AK8975=y
CONFIG_AK09911=y
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
# CONFIG_BMC150_MAGN_SPI is not set
CONFIG_MAG3110=y
CONFIG_HID_SENSOR_MAGNETOMETER_3D=y
CONFIG_MMC35240=y
# CONFIG_IIO_ST_MAGN_3AXIS is not set
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
# CONFIG_SENSORS_HMC5843_SPI is not set
#
# Multiplexers
#
#
# Inclinometer sensors
#
CONFIG_HID_SENSOR_INCLINOMETER_3D=y
# CONFIG_HID_SENSOR_DEVICE_ROTATION is not set
#
# Triggers - standalone
#
CONFIG_IIO_HRTIMER_TRIGGER=y
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
CONFIG_IIO_TIGHTLOOP_TRIGGER=y
CONFIG_IIO_SYSFS_TRIGGER=y
#
# Digital potentiometers
#
# CONFIG_AD5272 is not set
CONFIG_DS1803=y
CONFIG_MAX5481=y
CONFIG_MAX5487=y
CONFIG_MCP4018=y
CONFIG_MCP4131=y
# CONFIG_MCP4531 is not set
CONFIG_TPL0102=y
#
# Digital potentiostats
#
CONFIG_LMP91000=y
#
# Pressure sensors
#
CONFIG_ABP060MG=y
CONFIG_BMP280=y
CONFIG_BMP280_I2C=y
CONFIG_BMP280_SPI=y
# CONFIG_HID_SENSOR_PRESS is not set
CONFIG_HP03=y
CONFIG_MPL115=y
CONFIG_MPL115_I2C=y
CONFIG_MPL115_SPI=y
CONFIG_MPL3115=y
CONFIG_MS5611=y
CONFIG_MS5611_I2C=y
CONFIG_MS5611_SPI=y
CONFIG_MS5637=y
CONFIG_IIO_ST_PRESS=y
CONFIG_IIO_ST_PRESS_I2C=y
CONFIG_IIO_ST_PRESS_SPI=y
CONFIG_T5403=y
CONFIG_HP206C=y
CONFIG_ZPA2326=y
CONFIG_ZPA2326_I2C=y
CONFIG_ZPA2326_SPI=y
#
# Lightning sensors
#
CONFIG_AS3935=y
#
# Proximity and distance sensors
#
CONFIG_LIDAR_LITE_V2=y
CONFIG_RFD77402=y
CONFIG_SRF04=y
CONFIG_SX9500=y
CONFIG_SRF08=y
#
# Temperature sensors
#
CONFIG_MAXIM_THERMOCOUPLE=y
CONFIG_HID_SENSOR_TEMP=y
# CONFIG_MLX90614 is not set
# CONFIG_MLX90632 is not set
# CONFIG_TMP006 is not set
CONFIG_TMP007=y
CONFIG_TSYS01=y
CONFIG_TSYS02D=y
CONFIG_NTB=y
CONFIG_NTB_AMD=y
CONFIG_NTB_IDT=y
CONFIG_NTB_INTEL=y
CONFIG_NTB_SWITCHTEC=y
CONFIG_NTB_PINGPONG=y
# CONFIG_NTB_TOOL is not set
CONFIG_NTB_PERF=y
CONFIG_NTB_TRANSPORT=y
# CONFIG_VME_BUS is not set
CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
# CONFIG_PWM_LP3943 is not set
CONFIG_PWM_LPSS=y
CONFIG_PWM_LPSS_PCI=y
# CONFIG_PWM_LPSS_PLATFORM is not set
CONFIG_PWM_PCA9685=y
#
# IRQ chip support
#
CONFIG_ARM_GIC_MAX_NR=1
CONFIG_IPACK_BUS=y
CONFIG_BOARD_TPCI200=y
# CONFIG_SERIAL_IPOCTAL is not set
CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_TI_SYSCON=y
CONFIG_FMC=y
CONFIG_FMC_FAKEDEV=y
CONFIG_FMC_TRIVIAL=y
# CONFIG_FMC_WRITE_EEPROM is not set
CONFIG_FMC_CHARDEV=y
#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
CONFIG_PHY_PXA_28NM_USB2=y
# CONFIG_PHY_CPCAP_USB is not set
# CONFIG_POWERCAP is not set
CONFIG_MCB=y
CONFIG_MCB_PCI=y
# CONFIG_MCB_LPC is not set
#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
CONFIG_THUNDERBOLT=y
#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_LIBNVDIMM=y
CONFIG_BLK_DEV_PMEM=y
CONFIG_ND_BLK=y
CONFIG_ND_CLAIM=y
CONFIG_ND_BTT=y
CONFIG_BTT=y
CONFIG_DAX_DRIVER=y
CONFIG_DAX=y
CONFIG_DEV_DAX=y
CONFIG_NVMEM=y
#
# HW tracing support
#
CONFIG_STM=y
CONFIG_STM_DUMMY=y
# CONFIG_STM_SOURCE_CONSOLE is not set
CONFIG_STM_SOURCE_HEARTBEAT=y
# CONFIG_INTEL_TH is not set
CONFIG_FPGA=y
CONFIG_ALTERA_PR_IP_CORE=y
CONFIG_FPGA_MGR_ALTERA_PS_SPI=y
CONFIG_FPGA_MGR_ALTERA_CVP=y
CONFIG_FPGA_MGR_XILINX_SPI=y
CONFIG_FPGA_BRIDGE=y
CONFIG_XILINX_PR_DECOUPLER=y
CONFIG_FPGA_REGION=y
CONFIG_PM_OPP=y
# CONFIG_UNISYS_VISORBUS is not set
CONFIG_SIOX=y
CONFIG_SIOX_BUS_GPIO=y
CONFIG_SLIMBUS=y
CONFIG_SLIM_QCOM_CTRL=y
#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=y
# CONFIG_DCDBAS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# Tegra firmware driver
#
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_ENCRYPTION is not set
CONFIG_EXT4_DEBUG=y
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
CONFIG_JFS_DEBUG=y
# CONFIG_JFS_STATISTICS is not set
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=y
# CONFIG_GFS2_FS_LOCKING_DLM is not set
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_NILFS2_FS=y
# CONFIG_F2FS_FS is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
# CONFIG_OVERLAY_FS is not set
#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
CONFIG_FSCACHE_DEBUG=y
CONFIG_FSCACHE_OBJECT_LIST=y
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
CONFIG_CACHEFILES_HISTOGRAM=y
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=y
CONFIG_ADFS_FS=y
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=y
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
# CONFIG_HFSPLUS_FS_POSIX_ACL is not set
# CONFIG_BEFS_FS is not set
CONFIG_BFS_FS=y
CONFIG_EFS_FS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
# CONFIG_JFFS2_FS_XATTR is not set
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
# CONFIG_JFFS2_ZLIB is not set
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
CONFIG_JFFS2_RUBIN=y
CONFIG_JFFS2_CMODE_NONE=y
# CONFIG_JFFS2_CMODE_PRIORITY is not set
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_ATIME_SUPPORT is not set
CONFIG_UBIFS_FS_ENCRYPTION=y
# CONFIG_UBIFS_FS_SECURITY is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
CONFIG_HPFS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
CONFIG_ROMFS_FS=y
# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
CONFIG_ROMFS_BACKED_BY_MTD=y
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
# CONFIG_PSTORE_DEFLATE_COMPRESS is not set
CONFIG_PSTORE_LZO_COMPRESS=y
CONFIG_PSTORE_LZ4_COMPRESS=y
CONFIG_PSTORE_LZ4HC_COMPRESS=y
CONFIG_PSTORE_842_COMPRESS=y
CONFIG_PSTORE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_842_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="842"
CONFIG_PSTORE_CONSOLE=y
# CONFIG_PSTORE_PMSG is not set
# CONFIG_PSTORE_RAM is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
CONFIG_UFS_DEBUG=y
CONFIG_EXOFS_FS=y
# CONFIG_EXOFS_DEBUG is not set
CONFIG_ORE=y
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not set
CONFIG_GRACE_PERIOD=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_SUNRPC_DEBUG is not set
CONFIG_SUNRPC_XPRT_RDMA=y
CONFIG_CEPH_FS=y
CONFIG_CEPH_FSCACHE=y
CONFIG_CEPH_FS_POSIX_ACL=y
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_UPCALL=y
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG=y
CONFIG_CIFS_DEBUG2=y
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SMB311=y
# CONFIG_CIFS_SMB_DIRECT is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_CODA_FS is not set
CONFIG_AFS_FS=y
CONFIG_AFS_DEBUG=y
CONFIG_AFS_FSCACHE=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_MAC_ROMAN=y
CONFIG_NLS_MAC_CELTIC=y
# CONFIG_NLS_MAC_CENTEURO is not set
CONFIG_NLS_MAC_CROATIAN=y
# CONFIG_NLS_MAC_CYRILLIC is not set
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
CONFIG_NLS_MAC_ICELAND=y
CONFIG_NLS_MAC_INUIT=y
CONFIG_NLS_MAC_ROMANIAN=y
CONFIG_NLS_MAC_TURKISH=y
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_SPLIT is not set
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_GDB_SCRIPTS is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_READABLE_ASM=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_PAGE_OWNER=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
CONFIG_FRAME_POINTER=y
CONFIG_STACK_VALIDATION=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_DEBUG_SLAB is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_HAVE_ARCH_KASAN=y
# CONFIG_KASAN is not set
CONFIG_ARCH_HAS_KCOV=y
# CONFIG_KCOV is not set
CONFIG_DEBUG_SHIRQ=y
#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_WQ_WATCHDOG=y
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_DEBUG_TIMEKEEPING=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
# CONFIG_DEBUG_RWSEMS is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
CONFIG_WW_MUTEX_SELFTEST=y
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_KOBJECT_RELEASE is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
# CONFIG_RCU_PERF_TEST is not set
CONFIG_RCU_TORTURE_TEST=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
CONFIG_DEBUG_WQ_FORCE_RR_CPU=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_NOTIFIER_ERROR_INJECTION=y
# CONFIG_PM_NOTIFIER_ERROR_INJECT is not set
CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
# CONFIG_MEMTEST is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_UBSAN=y
# CONFIG_UBSAN_SANITIZE_ALL is not set
# CONFIG_UBSAN_ALIGNMENT is not set
CONFIG_UBSAN_NULL=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not set
CONFIG_X86_PTDUMP_CORE=y
CONFIG_X86_PTDUMP=y
CONFIG_DEBUG_WX=y
# CONFIG_DOUBLEFAULT is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
CONFIG_DEBUG_ENTRY=y
CONFIG_DEBUG_NMI_SELFTEST=y
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
# CONFIG_UNWINDER_ORC is not set
CONFIG_UNWINDER_FRAME_POINTER=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_SECURITY_DMESG_RESTRICT=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_PAGE_TABLE_ISOLATION is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
# CONFIG_HARDENED_USERCOPY_FALLBACK is not set
# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
CONFIG_FORTIFY_SOURCE=y
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH="/sbin/usermode-helper"
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_MCRYPTD=y
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_SIMD=y
CONFIG_CRYPTO_GLUE_HELPER_X86=y
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=y
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=y
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=y
CONFIG_CRYPTO_PCBC=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=y
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_VMAC=y
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32=y
# CONFIG_CRYPTO_CRC32_PCLMUL is not set
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=y
CONFIG_CRYPTO_POLY1305_X86_64=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
CONFIG_CRYPTO_RMD160=y
CONFIG_CRYPTO_RMD256=y
CONFIG_CRYPTO_RMD320=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
CONFIG_CRYPTO_SHA256_SSSE3=y
CONFIG_CRYPTO_SHA512_SSSE3=y
CONFIG_CRYPTO_SHA1_MB=y
# CONFIG_CRYPTO_SHA256_MB is not set
CONFIG_CRYPTO_SHA512_MB=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_SHA3=y
# CONFIG_CRYPTO_SM3 is not set
CONFIG_CRYPTO_TGR192=y
# CONFIG_CRYPTO_WP512 is not set
CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=y
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_AES_NI_INTEL=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
CONFIG_CRYPTO_CAMELLIA=y
CONFIG_CRYPTO_CAMELLIA_X86_64=y
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
CONFIG_CRYPTO_CAST_COMMON=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST5_AVX_X86_64=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_CAST6_AVX_X86_64=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_DES3_EDE_X86_64=y
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_SALSA20=y
CONFIG_CRYPTO_SALSA20_X86_64=y
CONFIG_CRYPTO_CHACHA20=y
# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
CONFIG_CRYPTO_SERPENT_AVX_X86_64=y
CONFIG_CRYPTO_SERPENT_AVX2_X86_64=y
CONFIG_CRYPTO_SM4=y
CONFIG_CRYPTO_SPECK=y
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=y
CONFIG_CRYPTO_LZ4=y
CONFIG_CRYPTO_LZ4HC=y
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
#
# Certificates for signature checking
#
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST=""
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC32_SELFTEST=y
# CONFIG_CRC32_SLICEBY8 is not set
# CONFIG_CRC32_SLICEBY4 is not set
CONFIG_CRC32_SARWATE=y
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC4 is not set
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_CRC8=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_842_COMPRESS=y
CONFIG_842_DECOMPRESS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4HC_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=y
CONFIG_BCH_CONST_PARAMS=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_INTERVAL_TREE=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_SGL_ALLOC=y
CONFIG_DMA_DIRECT_OPS=y
CONFIG_DMA_VIRT_OPS=y
CONFIG_CPUMASK_OFFSTACK=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=y
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=y
CONFIG_DDR=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
CONFIG_PRIME_NUMBERS=y
# CONFIG_STRING_SELFTEST is not set
[-- Attachment #4: reproduce-yocto-lkp-hsw01-105:20180501235610:x86_64-randconfig-s3-05012323:4.17.0-rc3:217 --]
[-- Type: text/plain, Size: 916 bytes --]
#!/bin/bash
kernel=$1
initrd=yocto-trinity-x86_64.cgz
wget --no-clobber https://github.com/fengguang/reproduce-kernel-bug/raw/master/yocto/$initrd
kvm=(
qemu-system-x86_64
-enable-kvm
-cpu Haswell,+smep
-kernel $kernel
-initrd $initrd
-m 512
-smp 1
-device e1000,netdev=net0
-netdev user,id=net0
-boot order=nc
-no-reboot
-watchdog i6300esb
-watchdog-action debug
-rtc base=localtime
-serial stdio
-display none
-monitor null
)
append=(
root=/dev/ram0
hung_task_panic=1
debug
apic=debug
sysrq_always_enabled
rcupdate.rcu_cpu_stall_timeout=100
net.ifnames=0
printk.devkmsg=on
panic=-1
softlockup_panic=1
nmi_watchdog=panic
oops=panic
load_ramdisk=2
prompt_ramdisk=0
drbd.minor_count=8
systemd.log_level=err
ignore_loglevel
console=tty0
earlyprintk=ttyS0,115200
console=ttyS0,115200
vga=normal
rw
drbd.minor_count=8
rcuperf.shutdown=0
)
"${kvm[@]}" -append "${append[*]}"
^ permalink raw reply
* Re: [PATCH] net/xfrm: Fix lookups for states with spi == 0
From: Dmitry Safonov @ 2018-05-02 12:41 UTC (permalink / raw)
To: Herbert Xu
Cc: linux-kernel, 0x7f454c46, Steffen Klassert, David S. Miller,
netdev
In-Reply-To: <20180502091125.jnzaaazh67z4ihyf@gondor.apana.org.au>
On Wed, 2018-05-02 at 17:11 +0800, Herbert Xu wrote:
> On Wed, May 02, 2018 at 03:02:20AM +0100, Dmitry Safonov wrote:
> > It seems to be a valid use case to add xfrm state without
> > Security Parameter Indexes (SPI) value associated:
> > ip xfrm state add src $src dst $dst proto $proto mode $mode sel src
> > $src dst $dst $algo
> >
> > The bad thing is that it's currently impossible to get/delete the
> > state
> > without SPI: __xfrm_state_insert() obviously doesn't add hash for
> > zero
> > SPI in xfrm.state_byspi, and xfrm_user_state_lookup() will fail as
> > xfrm_state_lookup() does lookups by hash.
> >
> > It also isn't possible to workaround from userspace as
> > xfrm_id_proto_match() will be always true for ah/esp/comp protos.
> >
> > So, don't try looking up by hash if SPI == 0.
> >
> > Cc: Steffen Klassert <steffen.klassert@secunet.com>
> > Cc: Herbert Xu <herbert@gondor.apana.org.au>
> > Cc: "David S. Miller" <davem@davemloft.net>
> > Cc: netdev@vger.kernel.org
> > Signed-off-by: Dmitry Safonov <dima@arista.com>
>
> A zero SPI is illegal for many IPsec protocols because that value
> is used for other purposes, e.g., IKE encapsulation.
But still it's possible to create ipsec with zero SPI.
And it seems not making sense to search for a state with SPI hash if
request has zero SPI.
--
Dima
^ permalink raw reply
* Re: [PATCH] net: stmmac: Avoid VLA usage
From: Kees Cook @ 2018-05-02 12:36 UTC (permalink / raw)
To: Jose Abreu
Cc: Giuseppe Cavallaro, Alexandre Torgue, LKML, Network Development
In-Reply-To: <2587c245-1d02-22a2-d24b-90b498183fc9@synopsys.com>
On Wed, May 2, 2018 at 1:54 AM, Jose Abreu <Jose.Abreu@synopsys.com> wrote:
> Hi Kees,
>
> On 01-05-2018 22:01, Kees Cook wrote:
>> In the quest to remove all stack VLAs from the kernel[1], this switches
>> the "status" stack buffer to use the existing small (8) upper bound on
>> how many queues can be checked for DMA, and adds a sanity-check just to
>> make sure it doesn't operate under pathological conditions.
>>
>> [1] https://urldefense.proofpoint.com/v2/url?u=http-3A__lkml.kernel.org_r_CA-2B55aFzCG-2DzNmZwX4A2FQpadafLfEzK6CC-3DqPXydAacU1RqZWA-40mail.gmail.com&d=DwIBAg&c=DPL6_X_6JkXFx7AXWqB0tg&r=WHDsc6kcWAl4i96Vm5hJ_19IJiuxx_p_Rzo2g-uHDKw&m=TBD6a7UY2VbpPmV9LOW_eHAyg8uPq1ZPDhq93VROTVE&s=4fvOST1HhWmZ4lThQe-dHCJYEXNOwey00BCXOWm8tKo&e=
>>
>> Signed-off-by: Kees Cook <keescook@chromium.org>
>>
>
> I rather prefer the variables declaration in reverse-tree order,
> but thats just a minor pick.
I can explicitly reorder the other variables, if you want?
> Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Thanks!
> PS: Is VLA warning switch in gcc already active? Because I didn't
> see this warning in my builds.
It is not. A bunch of people have been building with KCFLAGS=-Wvla to
find the VLAs and sending patches. Once we get rid of them all, we can
add the flag to the top-level Makefile.
-Kees
--
Kees Cook
Pixel Security
^ permalink raw reply
* Re: non-blocking connect for kernel SCTP sockets
From: Michal Kubecek @ 2018-05-02 12:32 UTC (permalink / raw)
To: Xin Long
Cc: network dev, linux-sctp, LKML, Vlad Yasevich, Neil Horman,
Gang He, GuoQing Jiang
In-Reply-To: <CADvbK_fT5qYmOKHgBf6KWyuRcDUT3Fa8DyMQkN75C8PFkPKLXw@mail.gmail.com>
On Wed, May 02, 2018 at 05:46:23PM +0800, Xin Long wrote:
> On Wed, May 2, 2018 at 5:06 PM, Michal Kubecek <mkubecek@suse.cz> wrote:
> > Hello,
> >
> > while investigating a bug, we noticed that DLM tries to connect an SCTP
> > socket in non-blocking mode using
> >
> > result = sock->ops->connect(sock, (struct sockaddr *)&daddr, addr_len,
> > O_NONBLOCK);
> >
> > which does not work. The reason is that inet_dgram_connect() cannot pass
> > its flags argument to sctp_connect() so that __sctp_connect() which does
> > the actual waiting resorts to checking sk->sk_socket->file->f_flags
> > instead. As the socket used by DLM is a kernel socket with no associated
> > file, it ends up blocking.
> >
> > TCP doesn't suffer from this problem as for TCP, the waiting is done in
> > inet_stream_connect() which has the flags argument. I also checked other
> > proto::connect handlers and sctp_connect() seems to be the only one with
> > this kind of problem.
> >
> > This could be worked around in DLM and further experiments indicate
> > current DLM code wouldn't actually handle the non-blocking connect
> > properly. But I still feel ignoring the flags argument is rather a trap
> > that should be fixed.
> It is a bug, https://bugzilla.redhat.com/show_bug.cgi?id=1251530
Not authorized. :-)
> We have the fix which also includes some cleanup, and needs to do
> more testing.
OK, I'll wait for your submission.
> > I have prepared a series adding flags argument to proto::connect and
> > using it in sctp_connect() and __sctp_connect(). But I'm not sure if
> > it's not too big hammer to address issue only affecting one handler.
> > So my question is: would such generic approach be preferred or should we,
> > rather make SCTP work the way TCP does, i.e. move the waiting from,
> > proto::connect() to proto_ops::connect()? This would require introducing
> > inet_seqpacket_connect() as inet_dgram_connect() is primarily intended
> > for use with UDP.)
> We don't fix it in the generic proto::connect, which will afftect
> many other places.
That was my concern, too. On the other hand, the TCP specific waiting
code in inet_stream_connect() makes me wonder if it wouldn't be cleaner
to move it into the TCP specific handler as well (which is something
this approach would allow).
> We're replacing only sctp's proto_ops::connect with sctp_connect and
> leave its proto::connect as NULL, so that it can get this flags param
> without touching the generic struct and code.
Yes, that should do the trick (and makes backporting to distribution
kernels with frozen kABI much easier). I guess I was too fixed on the
split between proto_ops::connect and proto::connect to see this
solution.
Michal Kubecek
^ permalink raw reply
* Re: [PATCH net] sctp: fix the issue that the cookie-ack with auth can't get processed
From: Marcelo Ricardo Leitner @ 2018-05-02 12:04 UTC (permalink / raw)
To: Xin Long; +Cc: network dev, linux-sctp, davem, Neil Horman
In-Reply-To: <aec2a2b5bff80a4d8eb6a9db96a36a92e429e574.1525239912.git.lucien.xin@gmail.com>
On Wed, May 02, 2018 at 01:45:12PM +0800, Xin Long wrote:
> When auth is enabled for cookie-ack chunk, in sctp_inq_pop, sctp
> processes auth chunk first, then continues to the next chunk in
> this packet if chunk_end + chunk_hdr size < skb_tail_pointer().
> Otherwise, it will go to the next packet or discard this chunk.
>
> However, it missed the fact that cookie-ack chunk's size is equal
> to chunk_hdr size, which couldn't match that check, and thus this
> chunk would not get processed.
>
> This patch fixes it by changing the check to chunk_end + chunk_hdr
> size <= skb_tail_pointer().
>
> Fixes: 26b87c788100 ("net: sctp: fix remote memory pressure from excessive queueing")
> Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
> ---
> net/sctp/inqueue.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/net/sctp/inqueue.c b/net/sctp/inqueue.c
> index 23ebc53..eb93ffe 100644
> --- a/net/sctp/inqueue.c
> +++ b/net/sctp/inqueue.c
> @@ -217,7 +217,7 @@ struct sctp_chunk *sctp_inq_pop(struct sctp_inq *queue)
> skb_pull(chunk->skb, sizeof(*ch));
> chunk->subh.v = NULL; /* Subheader is no longer valid. */
>
> - if (chunk->chunk_end + sizeof(*ch) < skb_tail_pointer(chunk->skb)) {
> + if (chunk->chunk_end + sizeof(*ch) <= skb_tail_pointer(chunk->skb)) {
> /* This is not a singleton */
> chunk->singleton = 0;
> } else if (chunk->chunk_end > skb_tail_pointer(chunk->skb)) {
> --
> 2.1.0
>
^ permalink raw reply
* Re: [PATCH net] sctp: use the old asoc when making the cookie-ack chunk in dupcook_d
From: Marcelo Ricardo Leitner @ 2018-05-02 12:04 UTC (permalink / raw)
To: Xin Long; +Cc: network dev, linux-sctp, davem, Neil Horman
In-Reply-To: <b4d64902d4a8e0774c44752056e35a32d69966a9.1525239586.git.lucien.xin@gmail.com>
On Wed, May 02, 2018 at 01:39:46PM +0800, Xin Long wrote:
> When processing a duplicate cookie-echo chunk, for case 'D', sctp will
> not process the param from this chunk. It means old asoc has nothing
> to be updated, and the new temp asoc doesn't have the complete info.
>
> So there's no reason to use the new asoc when creating the cookie-ack
> chunk. Otherwise, like when auth is enabled for cookie-ack, the chunk
> can not be set with auth, and it will definitely be dropped by peer.
>
> This issue is there since very beginning, and we fix it by using the
> old asoc instead.
>
> Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
> ---
> net/sctp/sm_statefuns.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
> index 98acfed..28c070e 100644
> --- a/net/sctp/sm_statefuns.c
> +++ b/net/sctp/sm_statefuns.c
> @@ -2056,7 +2056,7 @@ static enum sctp_disposition sctp_sf_do_dupcook_d(
> }
> }
>
> - repl = sctp_make_cookie_ack(new_asoc, chunk);
> + repl = sctp_make_cookie_ack(asoc, chunk);
> if (!repl)
> goto nomem;
>
> --
> 2.1.0
>
^ permalink raw reply
* Re: [PATCH net] sctp: init active key for the new asoc in dupcook_a and dupcook_b
From: Marcelo Ricardo Leitner @ 2018-05-02 12:04 UTC (permalink / raw)
To: Xin Long; +Cc: network dev, linux-sctp, davem, Neil Horman
In-Reply-To: <96c2191206cb67ccec250ca1ec66d83dc9f40c9a.1525239464.git.lucien.xin@gmail.com>
On Wed, May 02, 2018 at 01:37:44PM +0800, Xin Long wrote:
> When processing a duplicate cookie-echo chunk, for case 'A' and 'B',
> after sctp_process_init for the new asoc, if auth is enabled for the
> cookie-ack chunk, the active key should also be initialized.
>
> Otherwise, the cookie-ack chunk made later can not be set with auth
> shkey properly, and a crash can even be caused by this, as after
> Commit 1b1e0bc99474 ("sctp: add refcnt support for sh_key"), sctp
> needs to hold the shkey when making control chunks.
>
> Fixes: 1b1e0bc99474 ("sctp: add refcnt support for sh_key")
> Reported-by: Jianwen Ji <jiji@redhat.com>
> Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
> ---
> net/sctp/sm_statefuns.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
> index dd0594a..98acfed 100644
> --- a/net/sctp/sm_statefuns.c
> +++ b/net/sctp/sm_statefuns.c
> @@ -1794,6 +1794,9 @@ static enum sctp_disposition sctp_sf_do_dupcook_a(
> GFP_ATOMIC))
> goto nomem;
>
> + if (sctp_auth_asoc_init_active_key(new_asoc, GFP_ATOMIC))
> + goto nomem;
> +
> /* Make sure no new addresses are being added during the
> * restart. Though this is a pretty complicated attack
> * since you'd have to get inside the cookie.
> @@ -1906,6 +1909,9 @@ static enum sctp_disposition sctp_sf_do_dupcook_b(
> GFP_ATOMIC))
> goto nomem;
>
> + if (sctp_auth_asoc_init_active_key(new_asoc, GFP_ATOMIC))
> + goto nomem;
> +
> /* Update the content of current association. */
> sctp_add_cmd_sf(commands, SCTP_CMD_UPDATE_ASSOC, SCTP_ASOC(new_asoc));
> sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
> --
> 2.1.0
>
^ permalink raw reply
* Re: [PATCH net-next v2 15/15] arm64: dts: allwinner: a64: add SRAM controller device tree node
From: Maxime Ripard @ 2018-05-02 11:54 UTC (permalink / raw)
To: Icenowy Zheng
Cc: linux-arm-kernel, Chen-Yu Tsai, Mark Rutland, devicetree,
Stephen Boyd, netdev, Michael Turquette, Rob Herring,
Corentin Labbe, Mark Brown, Giuseppe Cavallaro, linux-clk
In-Reply-To: <29E5670C-9D17-4EC1-AAAC-0CF33DD0534C@aosc.io>
[-- Attachment #1: Type: text/plain, Size: 2579 bytes --]
On Wed, May 02, 2018 at 06:19:51PM +0800, Icenowy Zheng wrote:
>
>
> 于 2018年5月2日 GMT+08:00 下午5:53:21, Chen-Yu Tsai <wens@csie.org> 写到:
> >On Wed, May 2, 2018 at 5:51 PM, Maxime Ripard
> ><maxime.ripard@bootlin.com> wrote:
> >> Hi,
> >>
> >> On Wed, May 02, 2018 at 12:12:27AM +0800, Chen-Yu Tsai wrote:
> >>> From: Icenowy Zheng <icenowy@aosc.io>
> >>>
> >>> Allwinner A64 has a SRAM controller, and in the device tree
> >currently
> >>> we have a syscon node to enable EMAC driver to access the EMAC clock
> >>> register. As SRAM controller driver can now export regmap for this
> >>> register, replace the syscon node to the SRAM controller device
> >node,
> >>> and let EMAC driver to acquire its EMAC clock regmap.
> >>>
> >>> Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
> >>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> >>> ---
> >>> arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 23
> >+++++++++++++++----
> >>> 1 file changed, 19 insertions(+), 4 deletions(-)
> >>>
> >>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> >b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> >>> index 1b2ef28c42bd..1c37659d9d41 100644
> >>> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> >>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> >>> @@ -168,10 +168,25 @@
> >>> #size-cells = <1>;
> >>> ranges;
> >>>
> >>> - syscon: syscon@1c00000 {
> >>> - compatible =
> >"allwinner,sun50i-a64-system-controller",
> >>> - "syscon";
> >>> + sram_controller: sram-controller@1c00000 {
> >>> + compatible =
> >"allwinner,sun50i-a64-sram-controller";
> >>
> >> I don't think there's anything preventing us from keeping the
> >> -system-controller compatible. It's what was in the DT before, and
> >> it's how it's called in the datasheet.
> >
> >I actually meant to ask you about this. The -system-controller
> >compatible matches the datasheet better. Maybe we should just
> >switch to that one?
>
> No, if we do the switch the system-controller compatible,
> the device will be probed on the same memory region with
> a syscon on old DTs.
The device hasn't magically changed either. Maybe we just need to add
a check to make sure we don't have the syscon compatible in the SRAM
driver probe so that the double driver issue doesn't happen?
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply
* Re: [PATCH net] sctp: fix the issue that the cookie-ack with auth can't get processed
From: Neil Horman @ 2018-05-02 11:47 UTC (permalink / raw)
To: Xin Long; +Cc: network dev, linux-sctp, davem, Marcelo Ricardo Leitner
In-Reply-To: <aec2a2b5bff80a4d8eb6a9db96a36a92e429e574.1525239912.git.lucien.xin@gmail.com>
On Wed, May 02, 2018 at 01:45:12PM +0800, Xin Long wrote:
> When auth is enabled for cookie-ack chunk, in sctp_inq_pop, sctp
> processes auth chunk first, then continues to the next chunk in
> this packet if chunk_end + chunk_hdr size < skb_tail_pointer().
> Otherwise, it will go to the next packet or discard this chunk.
>
> However, it missed the fact that cookie-ack chunk's size is equal
> to chunk_hdr size, which couldn't match that check, and thus this
> chunk would not get processed.
>
> This patch fixes it by changing the check to chunk_end + chunk_hdr
> size <= skb_tail_pointer().
>
> Fixes: 26b87c788100 ("net: sctp: fix remote memory pressure from excessive queueing")
> Signed-off-by: Xin Long <lucien.xin@gmail.com>
> ---
> net/sctp/inqueue.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/net/sctp/inqueue.c b/net/sctp/inqueue.c
> index 23ebc53..eb93ffe 100644
> --- a/net/sctp/inqueue.c
> +++ b/net/sctp/inqueue.c
> @@ -217,7 +217,7 @@ struct sctp_chunk *sctp_inq_pop(struct sctp_inq *queue)
> skb_pull(chunk->skb, sizeof(*ch));
> chunk->subh.v = NULL; /* Subheader is no longer valid. */
>
> - if (chunk->chunk_end + sizeof(*ch) < skb_tail_pointer(chunk->skb)) {
> + if (chunk->chunk_end + sizeof(*ch) <= skb_tail_pointer(chunk->skb)) {
> /* This is not a singleton */
> chunk->singleton = 0;
> } else if (chunk->chunk_end > skb_tail_pointer(chunk->skb)) {
> --
> 2.1.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sctp" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
^ permalink raw reply
* Re: [PATCH net] sctp: use the old asoc when making the cookie-ack chunk in dupcook_d
From: Neil Horman @ 2018-05-02 11:46 UTC (permalink / raw)
To: Xin Long; +Cc: network dev, linux-sctp, davem, Marcelo Ricardo Leitner
In-Reply-To: <b4d64902d4a8e0774c44752056e35a32d69966a9.1525239586.git.lucien.xin@gmail.com>
On Wed, May 02, 2018 at 01:39:46PM +0800, Xin Long wrote:
> When processing a duplicate cookie-echo chunk, for case 'D', sctp will
> not process the param from this chunk. It means old asoc has nothing
> to be updated, and the new temp asoc doesn't have the complete info.
>
> So there's no reason to use the new asoc when creating the cookie-ack
> chunk. Otherwise, like when auth is enabled for cookie-ack, the chunk
> can not be set with auth, and it will definitely be dropped by peer.
>
> This issue is there since very beginning, and we fix it by using the
> old asoc instead.
>
> Signed-off-by: Xin Long <lucien.xin@gmail.com>
> ---
> net/sctp/sm_statefuns.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
> index 98acfed..28c070e 100644
> --- a/net/sctp/sm_statefuns.c
> +++ b/net/sctp/sm_statefuns.c
> @@ -2056,7 +2056,7 @@ static enum sctp_disposition sctp_sf_do_dupcook_d(
> }
> }
>
> - repl = sctp_make_cookie_ack(new_asoc, chunk);
> + repl = sctp_make_cookie_ack(asoc, chunk);
> if (!repl)
> goto nomem;
>
> --
> 2.1.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sctp" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
^ permalink raw reply
* Re: [PATCH net] sctp: init active key for the new asoc in dupcook_a and dupcook_b
From: Neil Horman @ 2018-05-02 11:38 UTC (permalink / raw)
To: Xin Long; +Cc: network dev, linux-sctp, davem, Marcelo Ricardo Leitner
In-Reply-To: <96c2191206cb67ccec250ca1ec66d83dc9f40c9a.1525239464.git.lucien.xin@gmail.com>
On Wed, May 02, 2018 at 01:37:44PM +0800, Xin Long wrote:
> When processing a duplicate cookie-echo chunk, for case 'A' and 'B',
> after sctp_process_init for the new asoc, if auth is enabled for the
> cookie-ack chunk, the active key should also be initialized.
>
> Otherwise, the cookie-ack chunk made later can not be set with auth
> shkey properly, and a crash can even be caused by this, as after
> Commit 1b1e0bc99474 ("sctp: add refcnt support for sh_key"), sctp
> needs to hold the shkey when making control chunks.
>
> Fixes: 1b1e0bc99474 ("sctp: add refcnt support for sh_key")
> Reported-by: Jianwen Ji <jiji@redhat.com>
> Signed-off-by: Xin Long <lucien.xin@gmail.com>
> ---
> net/sctp/sm_statefuns.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
> index dd0594a..98acfed 100644
> --- a/net/sctp/sm_statefuns.c
> +++ b/net/sctp/sm_statefuns.c
> @@ -1794,6 +1794,9 @@ static enum sctp_disposition sctp_sf_do_dupcook_a(
> GFP_ATOMIC))
> goto nomem;
>
> + if (sctp_auth_asoc_init_active_key(new_asoc, GFP_ATOMIC))
> + goto nomem;
> +
> /* Make sure no new addresses are being added during the
> * restart. Though this is a pretty complicated attack
> * since you'd have to get inside the cookie.
> @@ -1906,6 +1909,9 @@ static enum sctp_disposition sctp_sf_do_dupcook_b(
> GFP_ATOMIC))
> goto nomem;
>
> + if (sctp_auth_asoc_init_active_key(new_asoc, GFP_ATOMIC))
> + goto nomem;
> +
> /* Update the content of current association. */
> sctp_add_cmd_sf(commands, SCTP_CMD_UPDATE_ASSOC, SCTP_ASOC(new_asoc));
> sctp_add_cmd_sf(commands, SCTP_CMD_NEW_STATE,
> --
> 2.1.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sctp" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
^ permalink raw reply
* [PATCH] 8139too: Use disable_irq_nosync() in rtl8139_poll_controller()
From: Sebastian Andrzej Siewior @ 2018-05-02 11:30 UTC (permalink / raw)
To: netdev
Cc: David S. Miller, Ingo Molnar, Thomas Gleixner,
Sebastian Andrzej Siewior
From: Ingo Molnar <mingo@elte.hu>
Use disable_irq_nosync() instead of disable_irq() as this might be
called in atomic context with netpoll.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
drivers/net/ethernet/realtek/8139too.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c
index d24b47b8e0b2..d118da5a10a2 100644
--- a/drivers/net/ethernet/realtek/8139too.c
+++ b/drivers/net/ethernet/realtek/8139too.c
@@ -2224,7 +2224,7 @@ static void rtl8139_poll_controller(struct net_device *dev)
struct rtl8139_private *tp = netdev_priv(dev);
const int irq = tp->pci_dev->irq;
- disable_irq(irq);
+ disable_irq_nosync(irq);
rtl8139_interrupt(irq, dev);
enable_irq(irq);
}
--
2.17.0
^ permalink raw reply related
* Re: [RFC v2 bpf-next 8/9] bpf: Provide helper to do lookups in kernel FIB table
From: Jesper Dangaard Brouer @ 2018-05-02 11:27 UTC (permalink / raw)
To: David Ahern
Cc: netdev, borkmann, ast, davem, shm, roopa, toke, john.fastabend,
brouer, Vincent Bernat
In-Reply-To: <20180429180752.15428-9-dsahern@gmail.com>
On Sun, 29 Apr 2018 11:07:51 -0700
David Ahern <dsahern@gmail.com> wrote:
> Initial performance numbers collected by Jesper, forwarded packets/sec:
>
> Full stack XDP FIB lookup XDP Direct lookup
> IPv4 1,947,969 7,074,156 7,415,333
> IPv6 1,728,000 6,165,504 7,262,720
Do notice these number is single CPU core forwarding performance!
On a Broadwell E5-1650 v4 @ 3.60GHz.
Another interesting data point is that xdp_redirect_map performance is
13,365,161 pps, which allow us to calculate/isolate the overhead/cost
of the FIB lookup.
(1/13365161-1/7074156)*10^9 = -66.5 ns
(1/13365161-1/7415333)*10^9 = -60.0 ns
Which is very close to the measured 50 ns cost of the FIB lookup, done
by Vincent Bernat.
See: https://vincent.bernat.im/en/blog/2017-ipv4-route-lookup-linux
Another way I calculate this is by (ran a new benchmark):
Performance: 7641593 (7,641,593) <= tx_unicast /sec
* Packet-gap: (1/7641593*10^9) = 130.86 ns
Find all FIB related lookup functions in perf-report::
Samples: 93K of event 'cycles:ppp', Event count (approx.): 88553104553
Overhead Cost CPU Command Symbol
20.63 % 26.99 ns 002 ksoftirqd/2 [k] fib_table_lookup
12.92 % 16.90 ns 002 ksoftirqd/2 [k] bpf_fib_lookup
2.40 % 3.14 ns 002 ksoftirqd/2 [k] fib_select_path
0.83 % 1.09 ns 002 ksoftirqd/2 [k] fib_get_table
0.40 % 0.52 ns 002 ksoftirqd/2 [k] l3mdev_fib_table_rcu
-----------
Tot:37.18 % (20.63+12.92+2.40+0.83+0.40)
===========
Cost of FIB lookup:
- 130.86/100*37.18 = 48.65 ns overhead by FIB lookup.
Again very close to Vincent's IPv4 measurements of ~50 ns.
Notice that the IPv6 measurements does not match up:
https://vincent.bernat.im/en/blog/2017-ipv6-route-lookup-linux
This is because, we/I'm just testing the IPv6 route cache here...
--
Best regards,
Jesper Dangaard Brouer
MSc.CS, Principal Kernel Engineer at Red Hat
LinkedIn: http://www.linkedin.com/in/brouer
^ permalink raw reply
* Re: [RFC v2 bpf-next 9/9] samples/bpf: Add examples of ipv4 and ipv6 forwarding in XDP
From: Jesper Dangaard Brouer @ 2018-05-02 11:13 UTC (permalink / raw)
To: David Ahern
Cc: netdev, borkmann, ast, davem, shm, roopa, toke, john.fastabend,
brouer, Tariq Toukan
In-Reply-To: <20180429180752.15428-10-dsahern@gmail.com>
On Sun, 29 Apr 2018 11:07:52 -0700 David Ahern <dsahern@gmail.com> wrote:
> + /* verify egress index has xdp support */
> + // TO-DO bpf_map_lookup_elem(&tx_port, &key) fails with
> + // cannot pass map_type 14 into func bpf_map_lookup_elem#1:
I just want to point out that I/we are aware of this "usability"
problem with the sample program, but I don't want to block the FIB
helper going upstream, we can fix this problem later.
The problem is that if you load this bpf/xdp prog, then all incoming
traffic (on that interface), will be forward using XDP, regardless
whether the egress ifindex support XDP or not. And if not supported,
then packets are dropped hard (only detectable via tracepoints).
If the bpf prog could tell/know that the egress ifindex doesn't
support XDP xmit, then it could simply return XDP_PASS to fallback to
the normal network stack.
--
Best regards,
Jesper Dangaard Brouer
MSc.CS, Principal Kernel Engineer at Red Hat
LinkedIn: http://www.linkedin.com/in/brouer
^ permalink raw reply
* [PATCH v3 3/3] selftests/bpf: ignore build products
From: Sirio Balmelli @ 2018-05-02 11:05 UTC (permalink / raw)
To: daniel; +Cc: netdev
Update .gitignore files
Signed-off-by: Sirio Balmelli <sirio@b-ad.ch>
---
tools/bpf/bpftool/.gitignore | 3 +++
tools/testing/selftests/bpf/.gitignore | 1 +
2 files changed, 4 insertions(+)
create mode 100644 tools/bpf/bpftool/.gitignore
diff --git a/tools/bpf/bpftool/.gitignore b/tools/bpf/bpftool/.gitignore
new file mode 100644
index 0000000..0d4e3a5
--- /dev/null
+++ b/tools/bpf/bpftool/.gitignore
@@ -0,0 +1,3 @@
+*d
+bpftool
+FEATURE-DUMP.bpftool
diff --git a/tools/testing/selftests/bpf/.gitignore b/tools/testing/selftests/bpf/.gitignore
index 3e3b3ce..adc8e54 100644
--- a/tools/testing/selftests/bpf/.gitignore
+++ b/tools/testing/selftests/bpf/.gitignore
@@ -16,3 +16,4 @@ test_sock
test_sock_addr
urandom_read
test_btf
+test_sockmap
--
2.7.4
^ permalink raw reply related
* [PATCH v3 2/3] selftests/bpf: Makefile: add include path
From: Sirio Balmelli @ 2018-05-02 11:05 UTC (permalink / raw)
To: daniel; +Cc: netdev
On some systems selftests fail to build, missing the following headers:
asm/byteorder.h
asm/socket.h
asm/swab.h
In the specific case of Ubuntu, this is because the files are in
'/usr/include/x86_64-linux-gnu' (see <https://wiki.ubuntu.com/MultiarchSpec>)
which is both architecture- and distro-specific.
The solution is to add $(KERNEL)/usr/include to the Makefile,
so the build references these from the current kernel build
and not the running system.
Signed-off-by: Sirio Balmelli <sirio@b-ad.ch>
---
tools/testing/selftests/bpf/Makefile | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 9d76218..1ec09c6 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -84,7 +84,10 @@ else
CPU ?= generic
endif
-CLANG_FLAGS = -I. -I./include/uapi -I../../../include/uapi \
+# we are in 'tools/testing/selftests/bpf'
+KERNEL=../../../..
+TOOLS=../../..
+CLANG_FLAGS = -I. -I./include/uapi -I$(TOOLS)/include/uapi -I$(KERNEL)/usr/include \
-Wno-compare-distinct-pointer-types
$(OUTPUT)/test_l4lb_noinline.o: CLANG_FLAGS += -fno-inline
--
2.7.4
^ permalink raw reply related
* [PATCH v3 1/3] selftests/bpf: add architecture-agnostic headers
From: Sirio Balmelli @ 2018-05-02 11:04 UTC (permalink / raw)
To: daniel; +Cc: netdev
bpf selftests fail to build with missing headers
'asm/bitsperlong.h' and 'asm/errno.h'
These already exist in 'tools/arch/[arch]/include';
add architecture-agnostic header files in 'tools/include/uapi'
to reference them.
Signed-off-by: Sirio Balmelli <sirio@b-ad.ch>
---
tools/include/uapi/asm/bitsperlong.h | 18 ++++++++++++++++++
tools/include/uapi/asm/errno.h | 17 +++++++++++++++++
2 files changed, 35 insertions(+)
create mode 100644 tools/include/uapi/asm/bitsperlong.h
create mode 100644 tools/include/uapi/asm/errno.h
diff --git a/tools/include/uapi/asm/bitsperlong.h b/tools/include/uapi/asm/bitsperlong.h
new file mode 100644
index 0000000..8dd6aef
--- /dev/null
+++ b/tools/include/uapi/asm/bitsperlong.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#if defined(__i386__) || defined(__x86_64__)
+#include "../../arch/x86/include/uapi/asm/bitsperlong.h"
+#elif defined(__aarch64__)
+#include "../../arch/arm64/include/uapi/asm/bitsperlong.h"
+#elif defined(__powerpc__)
+#include "../../arch/powerpc/include/uapi/asm/bitsperlong.h"
+#elif defined(__s390__)
+#include "../../arch/s390/include/uapi/asm/bitsperlong.h"
+#elif defined(__sparc__)
+#include "../../arch/sparc/include/uapi/asm/bitsperlong.h"
+#elif defined(__mips__)
+#include "../../arch/mips/include/uapi/asm/bitsperlong.h"
+#elif defined(__ia64__)
+#include "../../arch/ia64/include/uapi/asm/bitsperlong.h"
+#else
+#include <asm-generic/bitsperlong.h>
+#endif
diff --git a/tools/include/uapi/asm/errno.h b/tools/include/uapi/asm/errno.h
new file mode 100644
index 0000000..8fe11c0
--- /dev/null
+++ b/tools/include/uapi/asm/errno.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#if defined(__i386__) || defined(__x86_64__)
+#include "../../arch/x86/include/uapi/asm/errno.h"
+#elif defined(__powerpc__)
+#include "../../arch/powerpc/include/uapi/asm/errno.h"
+#elif defined(__sparc__)
+#include "../../arch/sparc/include/uapi/asm/errno.h"
+#elif defined(__alpha__)
+#include "../../arch/alpha/include/uapi/asm/errno.h"
+#elif defined(__mips__)
+#include "../../arch/mips/include/uapi/asm/errno.h"
+#elif defined(__ia64__)
+#include "../../arch/ia64/include/uapi/asm/errno.h"
+#elif defined(__xtensa__)
+#include "../../arch/xtensa/include/uapi/asm/errno.h"
+#else
+#include <asm-generic/errno.h>
+#endif
--
2.7.4
^ permalink raw reply related
* [PATCH v3 0/3] selftests/bpf
From: Sirio Balmelli @ 2018-05-02 11:04 UTC (permalink / raw)
To: daniel; +Cc: netdev
Review of v2 patch appreciated.
Trying a saner approach for includes handling,
thank you daniel@iogearbox.net for steering me in the right direction.
Please note I did run into some missing headers that were nowhere
in '$(KERNEL)/tools' at all, but present in '$(KERNEL)/usr/include'.
I'm assuming these selftests already build for almost everyone else since they
probably have a sane '/usr/include' ecosystem, which this particular
Ubuntu system does not.
Rather than copy individual headers into '$(KERNEL)/tools/include' however,
I decided to simply point at '$(KERNEL)/usr/include'.
The idea is to rely less on the headers outside the kernel tree,
but also avoid adding maintenance burden by duplicating headers into
'tools'.
Let me know what you think.
Sirio Balmelli (3):
selftests/bpf: add architecture-agnostic headers in tools/include
selftests/bpf: Makefile: add include path to $(KERNEL)/usr/include
selftests/bpf: ignore build products
tools/bpf/bpftool/.gitignore | 3 +++
tools/include/uapi/asm/bitsperlong.h | 18 ++++++++++++++++++
tools/include/uapi/asm/errno.h | 17 +++++++++++++++++
tools/testing/selftests/bpf/.gitignore | 1 +
tools/testing/selftests/bpf/Makefile | 5 ++++-
5 files changed, 43 insertions(+), 1 deletion(-)
create mode 100644 tools/bpf/bpftool/.gitignore
create mode 100644 tools/include/uapi/asm/bitsperlong.h
create mode 100644 tools/include/uapi/asm/errno.h
--
2.7.4
^ permalink raw reply
* [PATCH bpf-next v3 15/15] samples/bpf: sample application and documentation for AF_XDP sockets
From: Björn Töpel @ 2018-05-02 11:01 UTC (permalink / raw)
To: bjorn.topel, magnus.karlsson, alexander.h.duyck, alexander.duyck,
john.fastabend, ast, brouer, willemdebruijn.kernel, daniel, mst,
netdev
Cc: michael.lundkvist, jesse.brandeburg, anjali.singhai, qi.z.zhang,
Björn Töpel
In-Reply-To: <20180502110136.3738-1-bjorn.topel@gmail.com>
From: Magnus Karlsson <magnus.karlsson@intel.com>
This is a sample application for AF_XDP sockets. The application
supports three different modes of operation: rxdrop, txonly and l2fwd.
To show-case a simple round-robin load-balancing between a set of
sockets in an xskmap, set the RR_LB compile time define option to 1 in
"xdpsock.h".
v2: The entries variable was calculated twice in {umem,xq}_nb_avail.
Co-authored-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
---
Documentation/networking/af_xdp.rst | 297 +++++++++++
Documentation/networking/index.rst | 1 +
samples/bpf/Makefile | 4 +
samples/bpf/xdpsock.h | 11 +
samples/bpf/xdpsock_kern.c | 56 +++
samples/bpf/xdpsock_user.c | 948 ++++++++++++++++++++++++++++++++++++
6 files changed, 1317 insertions(+)
create mode 100644 Documentation/networking/af_xdp.rst
create mode 100644 samples/bpf/xdpsock.h
create mode 100644 samples/bpf/xdpsock_kern.c
create mode 100644 samples/bpf/xdpsock_user.c
diff --git a/Documentation/networking/af_xdp.rst b/Documentation/networking/af_xdp.rst
new file mode 100644
index 000000000000..91928d9ee4bf
--- /dev/null
+++ b/Documentation/networking/af_xdp.rst
@@ -0,0 +1,297 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======
+AF_XDP
+======
+
+Overview
+========
+
+AF_XDP is an address family that is optimized for high performance
+packet processing.
+
+This document assumes that the reader is familiar with BPF and XDP. If
+not, the Cilium project has an excellent reference guide at
+http://cilium.readthedocs.io/en/doc-1.0/bpf/.
+
+Using the XDP_REDIRECT action from an XDP program, the program can
+redirect ingress frames to other XDP enabled netdevs, using the
+bpf_redirect_map() function. AF_XDP sockets enable the possibility for
+XDP programs to redirect frames to a memory buffer in a user-space
+application.
+
+An AF_XDP socket (XSK) is created with the normal socket()
+syscall. Associated with each XSK are two rings: the RX ring and the
+TX ring. A socket can receive packets on the RX ring and it can send
+packets on the TX ring. These rings are registered and sized with the
+setsockopts XDP_RX_RING and XDP_TX_RING, respectively. It is mandatory
+to have at least one of these rings for each socket. An RX or TX
+descriptor ring points to a data buffer in a memory area called a
+UMEM. RX and TX can share the same UMEM so that a packet does not have
+to be copied between RX and TX. Moreover, if a packet needs to be kept
+for a while due to a possible retransmit, the descriptor that points
+to that packet can be changed to point to another and reused right
+away. This again avoids copying data.
+
+The UMEM consists of a number of equally size frames and each frame
+has a unique frame id. A descriptor in one of the rings references a
+frame by referencing its frame id. The user space allocates memory for
+this UMEM using whatever means it feels is most appropriate (malloc,
+mmap, huge pages, etc). This memory area is then registered with the
+kernel using the new setsockopt XDP_UMEM_REG. The UMEM also has two
+rings: the FILL ring and the COMPLETION ring. The fill ring is used by
+the application to send down frame ids for the kernel to fill in with
+RX packet data. References to these frames will then appear in the RX
+ring once each packet has been received. The completion ring, on the
+other hand, contains frame ids that the kernel has transmitted
+completely and can now be used again by user space, for either TX or
+RX. Thus, the frame ids appearing in the completion ring are ids that
+were previously transmitted using the TX ring. In summary, the RX and
+FILL rings are used for the RX path and the TX and COMPLETION rings
+are used for the TX path.
+
+The socket is then finally bound with a bind() call to a device and a
+specific queue id on that device, and it is not until bind is
+completed that traffic starts to flow.
+
+The UMEM can be shared between processes, if desired. If a process
+wants to do this, it simply skips the registration of the UMEM and its
+corresponding two rings, sets the XDP_SHARED_UMEM flag in the bind
+call and submits the XSK of the process it would like to share UMEM
+with as well as its own newly created XSK socket. The new process will
+then receive frame id references in its own RX ring that point to this
+shared UMEM. Note that since the ring structures are single-consumer /
+single-producer (for performance reasons), the new process has to
+create its own socket with associated RX and TX rings, since it cannot
+share this with the other process. This is also the reason that there
+is only one set of FILL and COMPLETION rings per UMEM. It is the
+responsibility of a single process to handle the UMEM.
+
+How is then packets distributed from an XDP program to the XSKs? There
+is a BPF map called XSKMAP (or BPF_MAP_TYPE_XSKMAP in full). The
+user-space application can place an XSK at an arbitrary place in this
+map. The XDP program can then redirect a packet to a specific index in
+this map and at this point XDP validates that the XSK in that map was
+indeed bound to that device and ring number. If not, the packet is
+dropped. If the map is empty at that index, the packet is also
+dropped. This also means that it is currently mandatory to have an XDP
+program loaded (and one XSK in the XSKMAP) to be able to get any
+traffic to user space through the XSK.
+
+AF_XDP can operate in two different modes: XDP_SKB and XDP_DRV. If the
+driver does not have support for XDP, or XDP_SKB is explicitly chosen
+when loading the XDP program, XDP_SKB mode is employed that uses SKBs
+together with the generic XDP support and copies out the data to user
+space. A fallback mode that works for any network device. On the other
+hand, if the driver has support for XDP, it will be used by the AF_XDP
+code to provide better performance, but there is still a copy of the
+data into user space.
+
+Concepts
+========
+
+In order to use an AF_XDP socket, a number of associated objects need
+to be setup.
+
+Jonathan Corbet has also written an excellent article on LWN,
+"Accelerating networking with AF_XDP". It can be found at
+https://lwn.net/Articles/750845/.
+
+UMEM
+----
+
+UMEM is a region of virtual contiguous memory, divided into
+equal-sized frames. An UMEM is associated to a netdev and a specific
+queue id of that netdev. It is created and configured (frame size,
+frame headroom, start address and size) by using the XDP_UMEM_REG
+setsockopt system call. A UMEM is bound to a netdev and queue id, via
+the bind() system call.
+
+An AF_XDP is socket linked to a single UMEM, but one UMEM can have
+multiple AF_XDP sockets. To share an UMEM created via one socket A,
+the next socket B can do this by setting the XDP_SHARED_UMEM flag in
+struct sockaddr_xdp member sxdp_flags, and passing the file descriptor
+of A to struct sockaddr_xdp member sxdp_shared_umem_fd.
+
+The UMEM has two single-producer/single-consumer rings, that are used
+to transfer ownership of UMEM frames between the kernel and the
+user-space application.
+
+Rings
+-----
+
+There are a four different kind of rings: Fill, Completion, RX and
+TX. All rings are single-producer/single-consumer, so the user-space
+application need explicit synchronization of multiple
+processes/threads are reading/writing to them.
+
+The UMEM uses two rings: Fill and Completion. Each socket associated
+with the UMEM must have an RX queue, TX queue or both. Say, that there
+is a setup with four sockets (all doing TX and RX). Then there will be
+one Fill ring, one Completion ring, four TX rings and four RX rings.
+
+The rings are head(producer)/tail(consumer) based rings. A producer
+writes the data ring at the index pointed out by struct xdp_ring
+producer member, and increasing the producer index. A consumer reads
+the data ring at the index pointed out by struct xdp_ring consumer
+member, and increasing the consumer index.
+
+The rings are configured and created via the _RING setsockopt system
+calls and mmapped to user-space using the appropriate offset to mmap()
+(XDP_PGOFF_RX_RING, XDP_PGOFF_TX_RING, XDP_UMEM_PGOFF_FILL_RING and
+XDP_UMEM_PGOFF_COMPLETION_RING).
+
+The size of the rings need to be of size power of two.
+
+UMEM Fill Ring
+~~~~~~~~~~~~~~
+
+The Fill ring is used to transfer ownership of UMEM frames from
+user-space to kernel-space. The UMEM indicies are passed in the
+ring. As an example, if the UMEM is 64k and each frame is 4k, then the
+UMEM has 16 frames and can pass indicies between 0 and 15.
+
+Frames passed to the kernel are used for the ingress path (RX rings).
+
+The user application produces UMEM indicies to this ring.
+
+UMEM Completetion Ring
+~~~~~~~~~~~~~~~~~~~~~~
+
+The Completion Ring is used transfer ownership of UMEM frames from
+kernel-space to user-space. Just like the Fill ring, UMEM indicies are
+used.
+
+Frames passed from the kernel to user-space are frames that has been
+sent (TX ring) and can be used by user-space again.
+
+The user application consumes UMEM indicies from this ring.
+
+
+RX Ring
+~~~~~~~
+
+The RX ring is the receiving side of a socket. Each entry in the ring
+is a struct xdp_desc descriptor. The descriptor contains UMEM index
+(idx), the length of the data (len), the offset into the frame
+(offset).
+
+If no frames have been passed to kernel via the Fill ring, no
+descriptors will (or can) appear on the RX ring.
+
+The user application consumes struct xdp_desc descriptors from this
+ring.
+
+TX Ring
+~~~~~~~
+
+The TX ring is used to send frames. The struct xdp_desc descriptor is
+filled (index, length and offset) and passed into the ring.
+
+To start the transfer a sendmsg() system call is required. This might
+be relaxed in the future.
+
+The user application produces struct xdp_desc descriptors to this
+ring.
+
+XSKMAP / BPF_MAP_TYPE_XSKMAP
+----------------------------
+
+On XDP side there is a BPF map type BPF_MAP_TYPE_XSKMAP (XSKMAP) that
+is used in conjunction with bpf_redirect_map() to pass the ingress
+frame to a socket.
+
+The user application inserts the socket into the map, via the bpf()
+system call.
+
+Note that if an XDP program tries to redirect to a socket that does
+not match the queue configuration and netdev, the frame will be
+dropped. E.g. an AF_XDP socket is bound to netdev eth0 and
+queue 17. Only the XDP program executing for eth0 and queue 17 will
+successfully pass data to the socket. Please refer to the sample
+application (samples/bpf/) in for an example.
+
+Usage
+=====
+
+In order to use AF_XDP sockets there are two parts needed. The
+user-space application and the XDP program. For a complete setup and
+usage example, please refer to the sample application. The user-space
+side is xdpsock_user.c and the XDP side xdpsock_kern.c.
+
+Naive ring dequeue and enqueue could look like this::
+
+ // typedef struct xdp_rxtx_ring RING;
+ // typedef struct xdp_umem_ring RING;
+
+ // typedef struct xdp_desc RING_TYPE;
+ // typedef __u32 RING_TYPE;
+
+ int dequeue_one(RING *ring, RING_TYPE *item)
+ {
+ __u32 entries = ring->ptrs.producer - ring->ptrs.consumer;
+
+ if (entries == 0)
+ return -1;
+
+ // read-barrier!
+
+ *item = ring->desc[ring->ptrs.consumer & (RING_SIZE - 1)];
+ ring->ptrs.consumer++;
+ return 0;
+ }
+
+ int enqueue_one(RING *ring, const RING_TYPE *item)
+ {
+ u32 free_entries = RING_SIZE - (ring->ptrs.producer - ring->ptrs.consumer);
+
+ if (free_entries == 0)
+ return -1;
+
+ ring->desc[ring->ptrs.producer & (RING_SIZE - 1)] = *item;
+
+ // write-barrier!
+
+ ring->ptrs.producer++;
+ return 0;
+ }
+
+
+For a more optimized version, please refer to the sample application.
+
+Sample application
+==================
+
+There is a xdpsock benchmarking/test application included that
+demonstrates how to use AF_XDP sockets with both private and shared
+UMEMs. Say that you would like your UDP traffic from port 4242 to end
+up in queue 16, that we will enable AF_XDP on. Here, we use ethtool
+for this::
+
+ ethtool -N p3p2 rx-flow-hash udp4 fn
+ ethtool -N p3p2 flow-type udp4 src-port 4242 dst-port 4242 \
+ action 16
+
+Running the rxdrop benchmark in XDP_DRV mode can then be done
+using::
+
+ samples/bpf/xdpsock -i p3p2 -q 16 -r -N
+
+For XDP_SKB mode, use the switch "-S" instead of "-N" and all options
+can be displayed with "-h", as usual.
+
+Credits
+=======
+
+- Björn Töpel (AF_XDP core)
+- Magnus Karlsson (AF_XDP core)
+- Alexander Duyck
+- Alexei Starovoitov
+- Daniel Borkmann
+- Jesper Dangaard Brouer
+- John Fastabend
+- Jonathan Corbet (LWN coverage)
+- Michael S. Tsirkin
+- Qi Z Zhang
+- Willem de Bruijn
+
diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst
index f204eaff657d..cbd9bdd4a79e 100644
--- a/Documentation/networking/index.rst
+++ b/Documentation/networking/index.rst
@@ -6,6 +6,7 @@ Contents:
.. toctree::
:maxdepth: 2
+ af_xdp
batman-adv
can
dpaa2/index
diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile
index 5e31770ac087..8e0c7fb6d7cc 100644
--- a/samples/bpf/Makefile
+++ b/samples/bpf/Makefile
@@ -45,6 +45,7 @@ hostprogs-y += xdp_rxq_info
hostprogs-y += syscall_tp
hostprogs-y += cpustat
hostprogs-y += xdp_adjust_tail
+hostprogs-y += xdpsock
# Libbpf dependencies
LIBBPF := ../../tools/lib/bpf/bpf.o ../../tools/lib/bpf/nlattr.o
@@ -98,6 +99,7 @@ xdp_rxq_info-objs := bpf_load.o $(LIBBPF) xdp_rxq_info_user.o
syscall_tp-objs := bpf_load.o $(LIBBPF) syscall_tp_user.o
cpustat-objs := bpf_load.o $(LIBBPF) cpustat_user.o
xdp_adjust_tail-objs := bpf_load.o $(LIBBPF) xdp_adjust_tail_user.o
+xdpsock-objs := bpf_load.o $(LIBBPF) xdpsock_user.o
# Tell kbuild to always build the programs
always := $(hostprogs-y)
@@ -151,6 +153,7 @@ always += xdp2skb_meta_kern.o
always += syscall_tp_kern.o
always += cpustat_kern.o
always += xdp_adjust_tail_kern.o
+always += xdpsock_kern.o
HOSTCFLAGS += -I$(objtree)/usr/include
HOSTCFLAGS += -I$(srctree)/tools/lib/
@@ -197,6 +200,7 @@ HOSTLOADLIBES_xdp_rxq_info += -lelf
HOSTLOADLIBES_syscall_tp += -lelf
HOSTLOADLIBES_cpustat += -lelf
HOSTLOADLIBES_xdp_adjust_tail += -lelf
+HOSTLOADLIBES_xdpsock += -lelf -pthread
# Allows pointing LLC/CLANG to a LLVM backend with bpf support, redefine on cmdline:
# make samples/bpf/ LLC=~/git/llvm/build/bin/llc CLANG=~/git/llvm/build/bin/clang
diff --git a/samples/bpf/xdpsock.h b/samples/bpf/xdpsock.h
new file mode 100644
index 000000000000..533ab81adfa1
--- /dev/null
+++ b/samples/bpf/xdpsock.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef XDPSOCK_H_
+#define XDPSOCK_H_
+
+/* Power-of-2 number of sockets */
+#define MAX_SOCKS 4
+
+/* Round-robin receive */
+#define RR_LB 0
+
+#endif /* XDPSOCK_H_ */
diff --git a/samples/bpf/xdpsock_kern.c b/samples/bpf/xdpsock_kern.c
new file mode 100644
index 000000000000..d8806c41362e
--- /dev/null
+++ b/samples/bpf/xdpsock_kern.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+#define KBUILD_MODNAME "foo"
+#include <uapi/linux/bpf.h>
+#include "bpf_helpers.h"
+
+#include "xdpsock.h"
+
+struct bpf_map_def SEC("maps") qidconf_map = {
+ .type = BPF_MAP_TYPE_ARRAY,
+ .key_size = sizeof(int),
+ .value_size = sizeof(int),
+ .max_entries = 1,
+};
+
+struct bpf_map_def SEC("maps") xsks_map = {
+ .type = BPF_MAP_TYPE_XSKMAP,
+ .key_size = sizeof(int),
+ .value_size = sizeof(int),
+ .max_entries = 4,
+};
+
+struct bpf_map_def SEC("maps") rr_map = {
+ .type = BPF_MAP_TYPE_PERCPU_ARRAY,
+ .key_size = sizeof(int),
+ .value_size = sizeof(unsigned int),
+ .max_entries = 1,
+};
+
+SEC("xdp_sock")
+int xdp_sock_prog(struct xdp_md *ctx)
+{
+ int *qidconf, key = 0, idx;
+ unsigned int *rr;
+
+ qidconf = bpf_map_lookup_elem(&qidconf_map, &key);
+ if (!qidconf)
+ return XDP_ABORTED;
+
+ if (*qidconf != ctx->rx_queue_index)
+ return XDP_PASS;
+
+#if RR_LB /* NB! RR_LB is configured in xdpsock.h */
+ rr = bpf_map_lookup_elem(&rr_map, &key);
+ if (!rr)
+ return XDP_ABORTED;
+
+ *rr = (*rr + 1) & (MAX_SOCKS - 1);
+ idx = *rr;
+#else
+ idx = 0;
+#endif
+
+ return bpf_redirect_map(&xsks_map, idx, 0);
+}
+
+char _license[] SEC("license") = "GPL";
diff --git a/samples/bpf/xdpsock_user.c b/samples/bpf/xdpsock_user.c
new file mode 100644
index 000000000000..4b8a7cf3e63b
--- /dev/null
+++ b/samples/bpf/xdpsock_user.c
@@ -0,0 +1,948 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 2017 - 2018 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <getopt.h>
+#include <libgen.h>
+#include <linux/bpf.h>
+#include <linux/if_link.h>
+#include <linux/if_xdp.h>
+#include <linux/if_ether.h>
+#include <net/if.h>
+#include <signal.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <net/ethernet.h>
+#include <sys/resource.h>
+#include <sys/socket.h>
+#include <sys/mman.h>
+#include <time.h>
+#include <unistd.h>
+#include <pthread.h>
+#include <locale.h>
+#include <sys/types.h>
+#include <poll.h>
+
+#include "bpf_load.h"
+#include "bpf_util.h"
+#include "libbpf.h"
+
+#include "xdpsock.h"
+
+#ifndef SOL_XDP
+#define SOL_XDP 283
+#endif
+
+#ifndef AF_XDP
+#define AF_XDP 44
+#endif
+
+#ifndef PF_XDP
+#define PF_XDP AF_XDP
+#endif
+
+#define NUM_FRAMES 131072
+#define FRAME_HEADROOM 0
+#define FRAME_SIZE 2048
+#define NUM_DESCS 1024
+#define BATCH_SIZE 16
+
+#define FQ_NUM_DESCS 1024
+#define CQ_NUM_DESCS 1024
+
+#define DEBUG_HEXDUMP 0
+
+typedef __u32 u32;
+
+static unsigned long prev_time;
+
+enum benchmark_type {
+ BENCH_RXDROP = 0,
+ BENCH_TXONLY = 1,
+ BENCH_L2FWD = 2,
+};
+
+static enum benchmark_type opt_bench = BENCH_RXDROP;
+static u32 opt_xdp_flags;
+static const char *opt_if = "";
+static int opt_ifindex;
+static int opt_queue;
+static int opt_poll;
+static int opt_shared_packet_buffer;
+static int opt_interval = 1;
+
+struct xdp_umem_uqueue {
+ u32 cached_prod;
+ u32 cached_cons;
+ u32 mask;
+ u32 size;
+ struct xdp_umem_ring *ring;
+};
+
+struct xdp_umem {
+ char (*frames)[FRAME_SIZE];
+ struct xdp_umem_uqueue fq;
+ struct xdp_umem_uqueue cq;
+ int fd;
+};
+
+struct xdp_uqueue {
+ u32 cached_prod;
+ u32 cached_cons;
+ u32 mask;
+ u32 size;
+ struct xdp_rxtx_ring *ring;
+};
+
+struct xdpsock {
+ struct xdp_uqueue rx;
+ struct xdp_uqueue tx;
+ int sfd;
+ struct xdp_umem *umem;
+ u32 outstanding_tx;
+ unsigned long rx_npkts;
+ unsigned long tx_npkts;
+ unsigned long prev_rx_npkts;
+ unsigned long prev_tx_npkts;
+};
+
+#define MAX_SOCKS 4
+static int num_socks;
+struct xdpsock *xsks[MAX_SOCKS];
+
+static unsigned long get_nsecs(void)
+{
+ struct timespec ts;
+
+ clock_gettime(CLOCK_MONOTONIC, &ts);
+ return ts.tv_sec * 1000000000UL + ts.tv_nsec;
+}
+
+static void dump_stats(void);
+
+#define lassert(expr) \
+ do { \
+ if (!(expr)) { \
+ fprintf(stderr, "%s:%s:%i: Assertion failed: " \
+ #expr ": errno: %d/\"%s\"\n", \
+ __FILE__, __func__, __LINE__, \
+ errno, strerror(errno)); \
+ dump_stats(); \
+ exit(EXIT_FAILURE); \
+ } \
+ } while (0)
+
+#define barrier() __asm__ __volatile__("": : :"memory")
+#define u_smp_rmb() barrier()
+#define u_smp_wmb() barrier()
+#define likely(x) __builtin_expect(!!(x), 1)
+#define unlikely(x) __builtin_expect(!!(x), 0)
+
+static const char pkt_data[] =
+ "\x3c\xfd\xfe\x9e\x7f\x71\xec\xb1\xd7\x98\x3a\xc0\x08\x00\x45\x00"
+ "\x00\x2e\x00\x00\x00\x00\x40\x11\x88\x97\x05\x08\x07\x08\xc8\x14"
+ "\x1e\x04\x10\x92\x10\x92\x00\x1a\x6d\xa3\x34\x33\x1f\x69\x40\x6b"
+ "\x54\x59\xb6\x14\x2d\x11\x44\xbf\xaf\xd9\xbe\xaa";
+
+static inline u32 umem_nb_free(struct xdp_umem_uqueue *q, u32 nb)
+{
+ u32 free_entries = q->size - (q->cached_prod - q->cached_cons);
+
+ if (free_entries >= nb)
+ return free_entries;
+
+ /* Refresh the local tail pointer */
+ q->cached_cons = q->ring->ptrs.consumer;
+
+ return q->size - (q->cached_prod - q->cached_cons);
+}
+
+static inline u32 xq_nb_free(struct xdp_uqueue *q, u32 ndescs)
+{
+ u32 free_entries = q->cached_cons - q->cached_prod;
+
+ if (free_entries >= ndescs)
+ return free_entries;
+
+ /* Refresh the local tail pointer */
+ q->cached_cons = q->ring->ptrs.consumer + q->size;
+ return q->cached_cons - q->cached_prod;
+}
+
+static inline u32 umem_nb_avail(struct xdp_umem_uqueue *q, u32 nb)
+{
+ u32 entries = q->cached_prod - q->cached_cons;
+
+ if (entries == 0) {
+ q->cached_prod = q->ring->ptrs.producer;
+ entries = q->cached_prod - q->cached_cons;
+ }
+
+ return (entries > nb) ? nb : entries;
+}
+
+static inline u32 xq_nb_avail(struct xdp_uqueue *q, u32 ndescs)
+{
+ u32 entries = q->cached_prod - q->cached_cons;
+
+ if (entries == 0) {
+ q->cached_prod = q->ring->ptrs.producer;
+ entries = q->cached_prod - q->cached_cons;
+ }
+
+ return (entries > ndescs) ? ndescs : entries;
+}
+
+static inline int umem_fill_to_kernel_ex(struct xdp_umem_uqueue *fq,
+ struct xdp_desc *d,
+ size_t nb)
+{
+ u32 i;
+
+ if (umem_nb_free(fq, nb) < nb)
+ return -ENOSPC;
+
+ for (i = 0; i < nb; i++) {
+ u32 idx = fq->cached_prod++ & fq->mask;
+
+ fq->ring->desc[idx] = d[i].idx;
+ }
+
+ u_smp_wmb();
+
+ fq->ring->ptrs.producer = fq->cached_prod;
+
+ return 0;
+}
+
+static inline int umem_fill_to_kernel(struct xdp_umem_uqueue *fq, u32 *d,
+ size_t nb)
+{
+ u32 i;
+
+ if (umem_nb_free(fq, nb) < nb)
+ return -ENOSPC;
+
+ for (i = 0; i < nb; i++) {
+ u32 idx = fq->cached_prod++ & fq->mask;
+
+ fq->ring->desc[idx] = d[i];
+ }
+
+ u_smp_wmb();
+
+ fq->ring->ptrs.producer = fq->cached_prod;
+
+ return 0;
+}
+
+static inline size_t umem_complete_from_kernel(struct xdp_umem_uqueue *cq,
+ u32 *d, size_t nb)
+{
+ u32 idx, i, entries = umem_nb_avail(cq, nb);
+
+ u_smp_rmb();
+
+ for (i = 0; i < entries; i++) {
+ idx = cq->cached_cons++ & cq->mask;
+ d[i] = cq->ring->desc[idx];
+ }
+
+ if (entries > 0) {
+ u_smp_wmb();
+
+ cq->ring->ptrs.consumer = cq->cached_cons;
+ }
+
+ return entries;
+}
+
+static inline void *xq_get_data(struct xdpsock *xsk, __u32 idx, __u32 off)
+{
+ lassert(idx < NUM_FRAMES);
+ return &xsk->umem->frames[idx][off];
+}
+
+static inline int xq_enq(struct xdp_uqueue *uq,
+ const struct xdp_desc *descs,
+ unsigned int ndescs)
+{
+ struct xdp_rxtx_ring *r = uq->ring;
+ unsigned int i;
+
+ if (xq_nb_free(uq, ndescs) < ndescs)
+ return -ENOSPC;
+
+ for (i = 0; i < ndescs; i++) {
+ u32 idx = uq->cached_prod++ & uq->mask;
+
+ r->desc[idx].idx = descs[i].idx;
+ r->desc[idx].len = descs[i].len;
+ r->desc[idx].offset = descs[i].offset;
+ }
+
+ u_smp_wmb();
+
+ r->ptrs.producer = uq->cached_prod;
+ return 0;
+}
+
+static inline int xq_enq_tx_only(struct xdp_uqueue *uq,
+ __u32 idx, unsigned int ndescs)
+{
+ struct xdp_rxtx_ring *q = uq->ring;
+ unsigned int i;
+
+ if (xq_nb_free(uq, ndescs) < ndescs)
+ return -ENOSPC;
+
+ for (i = 0; i < ndescs; i++) {
+ u32 idx = uq->cached_prod++ & uq->mask;
+
+ q->desc[idx].idx = idx + i;
+ q->desc[idx].len = sizeof(pkt_data) - 1;
+ q->desc[idx].offset = 0;
+ }
+
+ u_smp_wmb();
+
+ q->ptrs.producer = uq->cached_prod;
+ return 0;
+}
+
+static inline int xq_deq(struct xdp_uqueue *uq,
+ struct xdp_desc *descs,
+ int ndescs)
+{
+ struct xdp_rxtx_ring *r = uq->ring;
+ unsigned int idx;
+ int i, entries;
+
+ entries = xq_nb_avail(uq, ndescs);
+
+ u_smp_rmb();
+
+ for (i = 0; i < entries; i++) {
+ idx = uq->cached_cons++ & uq->mask;
+ descs[i] = r->desc[idx];
+ }
+
+ if (entries > 0) {
+ u_smp_wmb();
+
+ r->ptrs.consumer = uq->cached_cons;
+ }
+
+ return entries;
+}
+
+static void swap_mac_addresses(void *data)
+{
+ struct ether_header *eth = (struct ether_header *)data;
+ struct ether_addr *src_addr = (struct ether_addr *)ð->ether_shost;
+ struct ether_addr *dst_addr = (struct ether_addr *)ð->ether_dhost;
+ struct ether_addr tmp;
+
+ tmp = *src_addr;
+ *src_addr = *dst_addr;
+ *dst_addr = tmp;
+}
+
+#if DEBUG_HEXDUMP
+static void hex_dump(void *pkt, size_t length, const char *prefix)
+{
+ int i = 0;
+ const unsigned char *address = (unsigned char *)pkt;
+ const unsigned char *line = address;
+ size_t line_size = 32;
+ unsigned char c;
+
+ printf("length = %zu\n", length);
+ printf("%s | ", prefix);
+ while (length-- > 0) {
+ printf("%02X ", *address++);
+ if (!(++i % line_size) || (length == 0 && i % line_size)) {
+ if (length == 0) {
+ while (i++ % line_size)
+ printf("__ ");
+ }
+ printf(" | "); /* right close */
+ while (line < address) {
+ c = *line++;
+ printf("%c", (c < 33 || c == 255) ? 0x2E : c);
+ }
+ printf("\n");
+ if (length > 0)
+ printf("%s | ", prefix);
+ }
+ }
+ printf("\n");
+}
+#endif
+
+static size_t gen_eth_frame(char *frame)
+{
+ memcpy(frame, pkt_data, sizeof(pkt_data) - 1);
+ return sizeof(pkt_data) - 1;
+}
+
+static struct xdp_umem *xdp_umem_configure(int sfd)
+{
+ int fq_size = FQ_NUM_DESCS, cq_size = CQ_NUM_DESCS;
+ struct xdp_umem_reg mr;
+ struct xdp_umem *umem;
+ void *bufs;
+
+ umem = calloc(1, sizeof(*umem));
+ lassert(umem);
+
+ lassert(posix_memalign(&bufs, getpagesize(), /* PAGE_SIZE aligned */
+ NUM_FRAMES * FRAME_SIZE) == 0);
+
+ mr.addr = (__u64)bufs;
+ mr.len = NUM_FRAMES * FRAME_SIZE;
+ mr.frame_size = FRAME_SIZE;
+ mr.frame_headroom = FRAME_HEADROOM;
+
+ lassert(setsockopt(sfd, SOL_XDP, XDP_UMEM_REG, &mr, sizeof(mr)) == 0);
+ lassert(setsockopt(sfd, SOL_XDP, XDP_UMEM_FILL_RING, &fq_size,
+ sizeof(int)) == 0);
+ lassert(setsockopt(sfd, SOL_XDP, XDP_UMEM_COMPLETION_RING, &cq_size,
+ sizeof(int)) == 0);
+
+ umem->fq.ring = mmap(0, sizeof(struct xdp_umem_ring) +
+ FQ_NUM_DESCS * sizeof(u32),
+ PROT_READ | PROT_WRITE,
+ MAP_SHARED | MAP_POPULATE, sfd,
+ XDP_UMEM_PGOFF_FILL_RING);
+ lassert(umem->fq.ring != MAP_FAILED);
+
+ umem->fq.mask = FQ_NUM_DESCS - 1;
+ umem->fq.size = FQ_NUM_DESCS;
+
+ umem->cq.ring = mmap(0, sizeof(struct xdp_umem_ring) +
+ CQ_NUM_DESCS * sizeof(u32),
+ PROT_READ | PROT_WRITE,
+ MAP_SHARED | MAP_POPULATE, sfd,
+ XDP_UMEM_PGOFF_COMPLETION_RING);
+ lassert(umem->cq.ring != MAP_FAILED);
+
+ umem->cq.mask = CQ_NUM_DESCS - 1;
+ umem->cq.size = CQ_NUM_DESCS;
+
+ umem->frames = (char (*)[FRAME_SIZE])bufs;
+ umem->fd = sfd;
+
+ if (opt_bench == BENCH_TXONLY) {
+ int i;
+
+ for (i = 0; i < NUM_FRAMES; i++)
+ (void)gen_eth_frame(&umem->frames[i][0]);
+ }
+
+ return umem;
+}
+
+static struct xdpsock *xsk_configure(struct xdp_umem *umem)
+{
+ struct sockaddr_xdp sxdp = {};
+ int sfd, ndescs = NUM_DESCS;
+ struct xdpsock *xsk;
+ bool shared = true;
+ u32 i;
+
+ sfd = socket(PF_XDP, SOCK_RAW, 0);
+ lassert(sfd >= 0);
+
+ xsk = calloc(1, sizeof(*xsk));
+ lassert(xsk);
+
+ xsk->sfd = sfd;
+ xsk->outstanding_tx = 0;
+
+ if (!umem) {
+ shared = false;
+ xsk->umem = xdp_umem_configure(sfd);
+ } else {
+ xsk->umem = umem;
+ }
+
+ lassert(setsockopt(sfd, SOL_XDP, XDP_RX_RING,
+ &ndescs, sizeof(int)) == 0);
+ lassert(setsockopt(sfd, SOL_XDP, XDP_TX_RING,
+ &ndescs, sizeof(int)) == 0);
+
+ /* Rx */
+ xsk->rx.ring = mmap(NULL,
+ sizeof(struct xdp_ring) +
+ NUM_DESCS * sizeof(struct xdp_desc),
+ PROT_READ | PROT_WRITE,
+ MAP_SHARED | MAP_POPULATE, sfd,
+ XDP_PGOFF_RX_RING);
+ lassert(xsk->rx.ring != MAP_FAILED);
+
+ if (!shared) {
+ for (i = 0; i < NUM_DESCS / 2; i++)
+ lassert(umem_fill_to_kernel(&xsk->umem->fq, &i, 1)
+ == 0);
+ }
+
+ /* Tx */
+ xsk->tx.ring = mmap(NULL,
+ sizeof(struct xdp_ring) +
+ NUM_DESCS * sizeof(struct xdp_desc),
+ PROT_READ | PROT_WRITE,
+ MAP_SHARED | MAP_POPULATE, sfd,
+ XDP_PGOFF_TX_RING);
+ lassert(xsk->tx.ring != MAP_FAILED);
+
+ xsk->rx.mask = NUM_DESCS - 1;
+ xsk->rx.size = NUM_DESCS;
+
+ xsk->tx.mask = NUM_DESCS - 1;
+ xsk->tx.size = NUM_DESCS;
+
+ sxdp.sxdp_family = PF_XDP;
+ sxdp.sxdp_ifindex = opt_ifindex;
+ sxdp.sxdp_queue_id = opt_queue;
+ if (shared) {
+ sxdp.sxdp_flags = XDP_SHARED_UMEM;
+ sxdp.sxdp_shared_umem_fd = umem->fd;
+ }
+
+ lassert(bind(sfd, (struct sockaddr *)&sxdp, sizeof(sxdp)) == 0);
+
+ return xsk;
+}
+
+static void print_benchmark(bool running)
+{
+ const char *bench_str = "INVALID";
+
+ if (opt_bench == BENCH_RXDROP)
+ bench_str = "rxdrop";
+ else if (opt_bench == BENCH_TXONLY)
+ bench_str = "txonly";
+ else if (opt_bench == BENCH_L2FWD)
+ bench_str = "l2fwd";
+
+ printf("%s:%d %s ", opt_if, opt_queue, bench_str);
+ if (opt_xdp_flags & XDP_FLAGS_SKB_MODE)
+ printf("xdp-skb ");
+ else if (opt_xdp_flags & XDP_FLAGS_DRV_MODE)
+ printf("xdp-drv ");
+ else
+ printf(" ");
+
+ if (opt_poll)
+ printf("poll() ");
+
+ if (running) {
+ printf("running...");
+ fflush(stdout);
+ }
+}
+
+static void dump_stats(void)
+{
+ unsigned long now = get_nsecs();
+ long dt = now - prev_time;
+ int i;
+
+ prev_time = now;
+
+ for (i = 0; i < num_socks; i++) {
+ char *fmt = "%-15s %'-11.0f %'-11lu\n";
+ double rx_pps, tx_pps;
+
+ rx_pps = (xsks[i]->rx_npkts - xsks[i]->prev_rx_npkts) *
+ 1000000000. / dt;
+ tx_pps = (xsks[i]->tx_npkts - xsks[i]->prev_tx_npkts) *
+ 1000000000. / dt;
+
+ printf("\n sock%d@", i);
+ print_benchmark(false);
+ printf("\n");
+
+ printf("%-15s %-11s %-11s %-11.2f\n", "", "pps", "pkts",
+ dt / 1000000000.);
+ printf(fmt, "rx", rx_pps, xsks[i]->rx_npkts);
+ printf(fmt, "tx", tx_pps, xsks[i]->tx_npkts);
+
+ xsks[i]->prev_rx_npkts = xsks[i]->rx_npkts;
+ xsks[i]->prev_tx_npkts = xsks[i]->tx_npkts;
+ }
+}
+
+static void *poller(void *arg)
+{
+ (void)arg;
+ for (;;) {
+ sleep(opt_interval);
+ dump_stats();
+ }
+
+ return NULL;
+}
+
+static void int_exit(int sig)
+{
+ (void)sig;
+ dump_stats();
+ bpf_set_link_xdp_fd(opt_ifindex, -1, opt_xdp_flags);
+ exit(EXIT_SUCCESS);
+}
+
+static struct option long_options[] = {
+ {"rxdrop", no_argument, 0, 'r'},
+ {"txonly", no_argument, 0, 't'},
+ {"l2fwd", no_argument, 0, 'l'},
+ {"interface", required_argument, 0, 'i'},
+ {"queue", required_argument, 0, 'q'},
+ {"poll", no_argument, 0, 'p'},
+ {"shared-buffer", no_argument, 0, 's'},
+ {"xdp-skb", no_argument, 0, 'S'},
+ {"xdp-native", no_argument, 0, 'N'},
+ {"interval", required_argument, 0, 'n'},
+ {0, 0, 0, 0}
+};
+
+static void usage(const char *prog)
+{
+ const char *str =
+ " Usage: %s [OPTIONS]\n"
+ " Options:\n"
+ " -r, --rxdrop Discard all incoming packets (default)\n"
+ " -t, --txonly Only send packets\n"
+ " -l, --l2fwd MAC swap L2 forwarding\n"
+ " -i, --interface=n Run on interface n\n"
+ " -q, --queue=n Use queue n (default 0)\n"
+ " -p, --poll Use poll syscall\n"
+ " -s, --shared-buffer Use shared packet buffer\n"
+ " -S, --xdp-skb=n Use XDP skb-mod\n"
+ " -N, --xdp-native=n Enfore XDP native mode\n"
+ " -n, --interval=n Specify statistics update interval (default 1 sec).\n"
+ "\n";
+ fprintf(stderr, str, prog);
+ exit(EXIT_FAILURE);
+}
+
+static void parse_command_line(int argc, char **argv)
+{
+ int option_index, c;
+
+ opterr = 0;
+
+ for (;;) {
+ c = getopt_long(argc, argv, "rtli:q:psSNn:", long_options,
+ &option_index);
+ if (c == -1)
+ break;
+
+ switch (c) {
+ case 'r':
+ opt_bench = BENCH_RXDROP;
+ break;
+ case 't':
+ opt_bench = BENCH_TXONLY;
+ break;
+ case 'l':
+ opt_bench = BENCH_L2FWD;
+ break;
+ case 'i':
+ opt_if = optarg;
+ break;
+ case 'q':
+ opt_queue = atoi(optarg);
+ break;
+ case 's':
+ opt_shared_packet_buffer = 1;
+ break;
+ case 'p':
+ opt_poll = 1;
+ break;
+ case 'S':
+ opt_xdp_flags |= XDP_FLAGS_SKB_MODE;
+ break;
+ case 'N':
+ opt_xdp_flags |= XDP_FLAGS_DRV_MODE;
+ break;
+ case 'n':
+ opt_interval = atoi(optarg);
+ break;
+ default:
+ usage(basename(argv[0]));
+ }
+ }
+
+ opt_ifindex = if_nametoindex(opt_if);
+ if (!opt_ifindex) {
+ fprintf(stderr, "ERROR: interface \"%s\" does not exist\n",
+ opt_if);
+ usage(basename(argv[0]));
+ }
+}
+
+static void kick_tx(int fd)
+{
+ int ret;
+
+ ret = sendto(fd, NULL, 0, MSG_DONTWAIT, NULL, 0);
+ if (ret >= 0 || errno == ENOBUFS || errno == EAGAIN)
+ return;
+ lassert(0);
+}
+
+static inline void complete_tx_l2fwd(struct xdpsock *xsk)
+{
+ u32 descs[BATCH_SIZE];
+ unsigned int rcvd;
+ size_t ndescs;
+
+ if (!xsk->outstanding_tx)
+ return;
+
+ kick_tx(xsk->sfd);
+ ndescs = (xsk->outstanding_tx > BATCH_SIZE) ? BATCH_SIZE :
+ xsk->outstanding_tx;
+
+ /* re-add completed Tx buffers */
+ rcvd = umem_complete_from_kernel(&xsk->umem->cq, descs, ndescs);
+ if (rcvd > 0) {
+ umem_fill_to_kernel(&xsk->umem->fq, descs, rcvd);
+ xsk->outstanding_tx -= rcvd;
+ xsk->tx_npkts += rcvd;
+ }
+}
+
+static inline void complete_tx_only(struct xdpsock *xsk)
+{
+ u32 descs[BATCH_SIZE];
+ unsigned int rcvd;
+
+ if (!xsk->outstanding_tx)
+ return;
+
+ kick_tx(xsk->sfd);
+
+ rcvd = umem_complete_from_kernel(&xsk->umem->cq, descs, BATCH_SIZE);
+ if (rcvd > 0) {
+ xsk->outstanding_tx -= rcvd;
+ xsk->tx_npkts += rcvd;
+ }
+}
+
+static void rx_drop(struct xdpsock *xsk)
+{
+ struct xdp_desc descs[BATCH_SIZE];
+ unsigned int rcvd, i;
+
+ rcvd = xq_deq(&xsk->rx, descs, BATCH_SIZE);
+ if (!rcvd)
+ return;
+
+ for (i = 0; i < rcvd; i++) {
+ u32 idx = descs[i].idx;
+
+ lassert(idx < NUM_FRAMES);
+#if DEBUG_HEXDUMP
+ char *pkt;
+ char buf[32];
+
+ pkt = xq_get_data(xsk, idx, descs[i].offset);
+ sprintf(buf, "idx=%d", idx);
+ hex_dump(pkt, descs[i].len, buf);
+#endif
+ }
+
+ xsk->rx_npkts += rcvd;
+
+ umem_fill_to_kernel_ex(&xsk->umem->fq, descs, rcvd);
+}
+
+static void rx_drop_all(void)
+{
+ struct pollfd fds[MAX_SOCKS + 1];
+ int i, ret, timeout, nfds = 1;
+
+ memset(fds, 0, sizeof(fds));
+
+ for (i = 0; i < num_socks; i++) {
+ fds[i].fd = xsks[i]->sfd;
+ fds[i].events = POLLIN;
+ timeout = 1000; /* 1sn */
+ }
+
+ for (;;) {
+ if (opt_poll) {
+ ret = poll(fds, nfds, timeout);
+ if (ret <= 0)
+ continue;
+ }
+
+ for (i = 0; i < num_socks; i++)
+ rx_drop(xsks[i]);
+ }
+}
+
+static void tx_only(struct xdpsock *xsk)
+{
+ int timeout, ret, nfds = 1;
+ struct pollfd fds[nfds + 1];
+ unsigned int idx = 0;
+
+ memset(fds, 0, sizeof(fds));
+ fds[0].fd = xsk->sfd;
+ fds[0].events = POLLOUT;
+ timeout = 1000; /* 1sn */
+
+ for (;;) {
+ if (opt_poll) {
+ ret = poll(fds, nfds, timeout);
+ if (ret <= 0)
+ continue;
+
+ if (fds[0].fd != xsk->sfd ||
+ !(fds[0].revents & POLLOUT))
+ continue;
+ }
+
+ if (xq_nb_free(&xsk->tx, BATCH_SIZE) >= BATCH_SIZE) {
+ lassert(xq_enq_tx_only(&xsk->tx, idx, BATCH_SIZE) == 0);
+
+ xsk->outstanding_tx += BATCH_SIZE;
+ idx += BATCH_SIZE;
+ idx %= NUM_FRAMES;
+ }
+
+ complete_tx_only(xsk);
+ }
+}
+
+static void l2fwd(struct xdpsock *xsk)
+{
+ for (;;) {
+ struct xdp_desc descs[BATCH_SIZE];
+ unsigned int rcvd, i;
+ int ret;
+
+ for (;;) {
+ complete_tx_l2fwd(xsk);
+
+ rcvd = xq_deq(&xsk->rx, descs, BATCH_SIZE);
+ if (rcvd > 0)
+ break;
+ }
+
+ for (i = 0; i < rcvd; i++) {
+ char *pkt = xq_get_data(xsk, descs[i].idx,
+ descs[i].offset);
+
+ swap_mac_addresses(pkt);
+#if DEBUG_HEXDUMP
+ char buf[32];
+ u32 idx = descs[i].idx;
+
+ sprintf(buf, "idx=%d", idx);
+ hex_dump(pkt, descs[i].len, buf);
+#endif
+ }
+
+ xsk->rx_npkts += rcvd;
+
+ ret = xq_enq(&xsk->tx, descs, rcvd);
+ lassert(ret == 0);
+ xsk->outstanding_tx += rcvd;
+ }
+}
+
+int main(int argc, char **argv)
+{
+ struct rlimit r = {RLIM_INFINITY, RLIM_INFINITY};
+ char xdp_filename[256];
+ int i, ret, key = 0;
+ pthread_t pt;
+
+ parse_command_line(argc, argv);
+
+ if (setrlimit(RLIMIT_MEMLOCK, &r)) {
+ fprintf(stderr, "ERROR: setrlimit(RLIMIT_MEMLOCK) \"%s\"\n",
+ strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ snprintf(xdp_filename, sizeof(xdp_filename), "%s_kern.o", argv[0]);
+
+ if (load_bpf_file(xdp_filename)) {
+ fprintf(stderr, "ERROR: load_bpf_file %s\n", bpf_log_buf);
+ exit(EXIT_FAILURE);
+ }
+
+ if (!prog_fd[0]) {
+ fprintf(stderr, "ERROR: load_bpf_file: \"%s\"\n",
+ strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ if (bpf_set_link_xdp_fd(opt_ifindex, prog_fd[0], opt_xdp_flags) < 0) {
+ fprintf(stderr, "ERROR: link set xdp fd failed\n");
+ exit(EXIT_FAILURE);
+ }
+
+ ret = bpf_map_update_elem(map_fd[0], &key, &opt_queue, 0);
+ if (ret) {
+ fprintf(stderr, "ERROR: bpf_map_update_elem qidconf\n");
+ exit(EXIT_FAILURE);
+ }
+
+ /* Create sockets... */
+ xsks[num_socks++] = xsk_configure(NULL);
+
+#if RR_LB
+ for (i = 0; i < MAX_SOCKS - 1; i++)
+ xsks[num_socks++] = xsk_configure(xsks[0]->umem);
+#endif
+
+ /* ...and insert them into the map. */
+ for (i = 0; i < num_socks; i++) {
+ key = i;
+ ret = bpf_map_update_elem(map_fd[1], &key, &xsks[i]->sfd, 0);
+ if (ret) {
+ fprintf(stderr, "ERROR: bpf_map_update_elem %d\n", i);
+ exit(EXIT_FAILURE);
+ }
+ }
+
+ signal(SIGINT, int_exit);
+ signal(SIGTERM, int_exit);
+ signal(SIGABRT, int_exit);
+
+ setlocale(LC_ALL, "");
+
+ ret = pthread_create(&pt, NULL, poller, NULL);
+ lassert(ret == 0);
+
+ prev_time = get_nsecs();
+
+ if (opt_bench == BENCH_RXDROP)
+ rx_drop_all();
+ else if (opt_bench == BENCH_TXONLY)
+ tx_only(xsks[0]);
+ else
+ l2fwd(xsks[0]);
+
+ return 0;
+}
--
2.14.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox