* [PATCH 04/14] net: pch_gbe: Remove sw_reset_phy HAL abstraction
From: Paul Burton @ 2018-06-23 3:17 UTC (permalink / raw)
To: netdev; +Cc: David S . Miller, Andrew Lunn, Paul Burton
In-Reply-To: <20180623031753.31893-1-paul.burton@mips.com>
For some reason the pch_gbe driver contains a struct pch_gbe_functions
with pointers used by a HAL abstraction layer, even though there is only
one implementation of each function.
This patch removes the sw_reset_phy abstraction, which it turns out is
never even used. Its one implementation, which is already called
directly within the same translation unit, can therefore be made static
and removed from the pch_gbe_phy.h header.
Signed-off-by: Paul Burton <paul.burton@mips.com>
---
drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h | 2 --
.../net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c | 16 ----------------
.../net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h | 1 -
.../net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c | 2 +-
.../net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h | 1 -
5 files changed, 1 insertion(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
index 5dbfcd55efa8..47ee7428c3d3 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
@@ -335,7 +335,6 @@ struct pch_gbe_hw;
* @read_phy_reg: for pch_gbe_hal_read_phy_reg
* @write_phy_reg: for pch_gbe_hal_write_phy_reg
* @reset_phy: for pch_gbe_hal_phy_hw_reset
- * @sw_reset_phy: for pch_gbe_hal_phy_sw_reset
*/
struct pch_gbe_functions {
void (*get_bus_info) (struct pch_gbe_hw *);
@@ -343,7 +342,6 @@ struct pch_gbe_functions {
s32 (*read_phy_reg) (struct pch_gbe_hw *, u32, u16 *);
s32 (*write_phy_reg) (struct pch_gbe_hw *, u32, u16);
void (*reset_phy) (struct pch_gbe_hw *);
- void (*sw_reset_phy) (struct pch_gbe_hw *);
};
/**
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
index 3c6e009955ab..e1ecfb076029 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
@@ -89,7 +89,6 @@ static const struct pch_gbe_functions pch_gbe_ops = {
.read_phy_reg = pch_gbe_phy_read_reg_miic,
.write_phy_reg = pch_gbe_phy_write_reg_miic,
.reset_phy = pch_gbe_phy_hw_reset,
- .sw_reset_phy = pch_gbe_phy_sw_reset,
};
/**
@@ -204,18 +203,3 @@ void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw)
}
hw->func->reset_phy(hw);
}
-
-/**
- * pch_gbe_hal_phy_sw_reset - Soft PHY reset
- * @hw: Pointer to the HW structure
- */
-void pch_gbe_hal_phy_sw_reset(struct pch_gbe_hw *hw)
-{
- if (!hw->func->sw_reset_phy) {
- struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
- netdev_err(adapter->netdev, "ERROR: configuration\n");
- return;
- }
- hw->func->sw_reset_phy(hw);
-}
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
index 13fcdfb4a94d..aa802f670055 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
@@ -27,6 +27,5 @@ s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw);
s32 pch_gbe_hal_read_phy_reg(struct pch_gbe_hw *hw, u32 offset, u16 *data);
s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset, u16 data);
void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw);
-void pch_gbe_hal_phy_sw_reset(struct pch_gbe_hw *hw);
#endif
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c
index a5cad5ea9436..6b35b573beef 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c
@@ -184,7 +184,7 @@ s32 pch_gbe_phy_write_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 data)
* pch_gbe_phy_sw_reset - PHY software reset
* @hw: Pointer to the HW structure
*/
-void pch_gbe_phy_sw_reset(struct pch_gbe_hw *hw)
+static void pch_gbe_phy_sw_reset(struct pch_gbe_hw *hw)
{
u16 phy_ctrl;
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
index 95ad0151ad02..efb955be8cac 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
@@ -26,7 +26,6 @@
s32 pch_gbe_phy_get_id(struct pch_gbe_hw *hw);
s32 pch_gbe_phy_read_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 *data);
s32 pch_gbe_phy_write_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 data);
-void pch_gbe_phy_sw_reset(struct pch_gbe_hw *hw);
void pch_gbe_phy_hw_reset(struct pch_gbe_hw *hw);
void pch_gbe_phy_power_up(struct pch_gbe_hw *hw);
void pch_gbe_phy_power_down(struct pch_gbe_hw *hw);
--
2.17.1
^ permalink raw reply related
* [PATCH 05/14] net: pch_gbe: Remove reset_phy HAL abstraction
From: Paul Burton @ 2018-06-23 3:17 UTC (permalink / raw)
To: netdev; +Cc: David S . Miller, Andrew Lunn, Paul Burton
In-Reply-To: <20180623031753.31893-1-paul.burton@mips.com>
For some reason the pch_gbe driver contains a struct pch_gbe_functions
with pointers used by a HAL abstraction layer, even though there is only
one implementation of each function.
This patch removes the reset_phy abstraction in favor of calling
pch_gbe_phy_hw_reset directly.
Signed-off-by: Paul Burton <paul.burton@mips.com>
---
drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h | 2 --
.../net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c | 16 ----------------
.../net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h | 1 -
.../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 4 ++--
4 files changed, 2 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
index 47ee7428c3d3..02e8da2b6ad2 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
@@ -334,14 +334,12 @@ struct pch_gbe_hw;
* @init_hw: for pch_gbe_hal_init_hw
* @read_phy_reg: for pch_gbe_hal_read_phy_reg
* @write_phy_reg: for pch_gbe_hal_write_phy_reg
- * @reset_phy: for pch_gbe_hal_phy_hw_reset
*/
struct pch_gbe_functions {
void (*get_bus_info) (struct pch_gbe_hw *);
s32 (*init_hw) (struct pch_gbe_hw *);
s32 (*read_phy_reg) (struct pch_gbe_hw *, u32, u16 *);
s32 (*write_phy_reg) (struct pch_gbe_hw *, u32, u16);
- void (*reset_phy) (struct pch_gbe_hw *);
};
/**
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
index e1ecfb076029..6fe09af545e8 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
@@ -88,7 +88,6 @@ static const struct pch_gbe_functions pch_gbe_ops = {
.init_hw = pch_gbe_plat_init_hw,
.read_phy_reg = pch_gbe_phy_read_reg_miic,
.write_phy_reg = pch_gbe_phy_write_reg_miic,
- .reset_phy = pch_gbe_phy_hw_reset,
};
/**
@@ -188,18 +187,3 @@ s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset,
return 0;
return hw->func->write_phy_reg(hw, offset, data);
}
-
-/**
- * pch_gbe_hal_phy_hw_reset - Hard PHY reset
- * @hw: Pointer to the HW structure
- */
-void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw)
-{
- if (!hw->func->reset_phy) {
- struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
- netdev_err(adapter->netdev, "ERROR: configuration\n");
- return;
- }
- hw->func->reset_phy(hw);
-}
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
index aa802f670055..96540f6648b5 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
@@ -26,6 +26,5 @@ void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw);
s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw);
s32 pch_gbe_hal_read_phy_reg(struct pch_gbe_hw *hw, u32 offset, u16 *data);
s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset, u16 data);
-void pch_gbe_hal_phy_hw_reset(struct pch_gbe_hw *hw);
#endif
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index fc5079fa01e8..175d6608bdb9 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -2538,7 +2538,7 @@ static void pch_gbe_remove(struct pci_dev *pdev)
cancel_work_sync(&adapter->reset_task);
unregister_netdev(netdev);
- pch_gbe_hal_phy_hw_reset(&adapter->hw);
+ pch_gbe_phy_hw_reset(&adapter->hw);
free_netdev(netdev);
}
@@ -2674,7 +2674,7 @@ static int pch_gbe_probe(struct pci_dev *pdev,
return 0;
err_free_adapter:
- pch_gbe_hal_phy_hw_reset(&adapter->hw);
+ pch_gbe_phy_hw_reset(&adapter->hw);
err_free_netdev:
free_netdev(netdev);
return ret;
--
2.17.1
^ permalink raw reply related
* [PATCH 06/14] net: pch_gbe: Remove {read,write}_phy_reg HAL abstraction
From: Paul Burton @ 2018-06-23 3:17 UTC (permalink / raw)
To: netdev; +Cc: David S . Miller, Andrew Lunn, Paul Burton
In-Reply-To: <20180623031753.31893-1-paul.burton@mips.com>
For some reason the pch_gbe driver contains a struct pch_gbe_functions
with pointers used by a HAL abstraction layer, even though there is only
one implementation of each function.
This patch removes the read_phy_reg & write_phy_reg abstractions in
favor of calling pch_gbe_phy_read_reg_miic & pch_gbe_phy_write_reg_miic
directly.
Signed-off-by: Paul Burton <paul.burton@mips.com>
---
.../net/ethernet/oki-semi/pch_gbe/pch_gbe.h | 4 ---
.../ethernet/oki-semi/pch_gbe/pch_gbe_api.c | 36 -------------------
.../ethernet/oki-semi/pch_gbe/pch_gbe_api.h | 2 --
.../oki-semi/pch_gbe/pch_gbe_ethtool.c | 4 +--
4 files changed, 2 insertions(+), 44 deletions(-)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
index 02e8da2b6ad2..728e876bffc6 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
@@ -332,14 +332,10 @@ struct pch_gbe_hw;
* struct pch_gbe_functions - HAL APi function pointer
* @get_bus_info: for pch_gbe_hal_get_bus_info
* @init_hw: for pch_gbe_hal_init_hw
- * @read_phy_reg: for pch_gbe_hal_read_phy_reg
- * @write_phy_reg: for pch_gbe_hal_write_phy_reg
*/
struct pch_gbe_functions {
void (*get_bus_info) (struct pch_gbe_hw *);
s32 (*init_hw) (struct pch_gbe_hw *);
- s32 (*read_phy_reg) (struct pch_gbe_hw *, u32, u16 *);
- s32 (*write_phy_reg) (struct pch_gbe_hw *, u32, u16);
};
/**
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
index 6fe09af545e8..484be4225352 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
@@ -86,8 +86,6 @@ static s32 pch_gbe_plat_init_hw(struct pch_gbe_hw *hw)
static const struct pch_gbe_functions pch_gbe_ops = {
.get_bus_info = pch_gbe_plat_get_bus_info,
.init_hw = pch_gbe_plat_init_hw,
- .read_phy_reg = pch_gbe_phy_read_reg_miic,
- .write_phy_reg = pch_gbe_phy_write_reg_miic,
};
/**
@@ -153,37 +151,3 @@ s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw)
}
return hw->func->init_hw(hw);
}
-
-/**
- * pch_gbe_hal_read_phy_reg - Reads PHY register
- * @hw: Pointer to the HW structure
- * @offset: The register to read
- * @data: The buffer to store the 16-bit read.
- * Returns:
- * 0: Successfully
- * Negative value: Failed
- */
-s32 pch_gbe_hal_read_phy_reg(struct pch_gbe_hw *hw, u32 offset,
- u16 *data)
-{
- if (!hw->func->read_phy_reg)
- return 0;
- return hw->func->read_phy_reg(hw, offset, data);
-}
-
-/**
- * pch_gbe_hal_write_phy_reg - Writes PHY register
- * @hw: Pointer to the HW structure
- * @offset: The register to read
- * @data: The value to write.
- * Returns:
- * 0: Successfully
- * Negative value: Failed
- */
-s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset,
- u16 data)
-{
- if (!hw->func->write_phy_reg)
- return 0;
- return hw->func->write_phy_reg(hw, offset, data);
-}
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
index 96540f6648b5..9cd19605f4ff 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
@@ -24,7 +24,5 @@
s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw);
void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw);
s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw);
-s32 pch_gbe_hal_read_phy_reg(struct pch_gbe_hw *hw, u32 offset, u16 *data);
-s32 pch_gbe_hal_write_phy_reg(struct pch_gbe_hw *hw, u32 offset, u16 data);
#endif
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
index 731ce1e419e4..da39d771ad87 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
@@ -125,7 +125,7 @@ static int pch_gbe_set_link_ksettings(struct net_device *netdev,
u32 advertising;
int ret;
- pch_gbe_hal_write_phy_reg(hw, MII_BMCR, BMCR_RESET);
+ pch_gbe_phy_write_reg_miic(hw, MII_BMCR, BMCR_RESET);
memcpy(©_ecmd, ecmd, sizeof(*ecmd));
@@ -204,7 +204,7 @@ static void pch_gbe_get_regs(struct net_device *netdev,
*regs_buff++ = ioread32(&hw->reg->INT_ST + i);
/* PHY register */
for (i = 0; i < PCH_GBE_PHY_REGS_LEN; i++) {
- pch_gbe_hal_read_phy_reg(&adapter->hw, i, &tmp);
+ pch_gbe_phy_read_reg_miic(&adapter->hw, i, &tmp);
*regs_buff++ = tmp;
}
}
--
2.17.1
^ permalink raw reply related
* [PATCH 07/14] net: pch_gbe: Remove init_hw HAL abstraction
From: Paul Burton @ 2018-06-23 3:17 UTC (permalink / raw)
To: netdev; +Cc: David S . Miller, Andrew Lunn, Paul Burton
In-Reply-To: <20180623031753.31893-1-paul.burton@mips.com>
For some reason the pch_gbe driver contains a struct pch_gbe_functions
with pointers used by a HAL abstraction layer, even though there is only
one implementation of each function.
This patch removes the init_hw abstraction in favor of inlining its
single implementation (pch_gbe_plat_init_hw) into its single caller
(pch_gbe_reset).
Signed-off-by: Paul Burton <paul.burton@mips.com>
---
.../net/ethernet/oki-semi/pch_gbe/pch_gbe.h | 2 -
.../ethernet/oki-semi/pch_gbe/pch_gbe_api.c | 45 -------------------
.../ethernet/oki-semi/pch_gbe/pch_gbe_api.h | 1 -
.../ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 19 ++++++--
4 files changed, 15 insertions(+), 52 deletions(-)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
index 728e876bffc6..2e824baff9d7 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
@@ -331,11 +331,9 @@ struct pch_gbe_hw;
/**
* struct pch_gbe_functions - HAL APi function pointer
* @get_bus_info: for pch_gbe_hal_get_bus_info
- * @init_hw: for pch_gbe_hal_init_hw
*/
struct pch_gbe_functions {
void (*get_bus_info) (struct pch_gbe_hw *);
- s32 (*init_hw) (struct pch_gbe_hw *);
};
/**
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
index 484be4225352..03fbd4752d4f 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
@@ -57,35 +57,8 @@ static void pch_gbe_plat_get_bus_info(struct pch_gbe_hw *hw)
hw->bus.width = pch_gbe_bus_width_pcie_x1;
}
-/**
- * pch_gbe_plat_init_hw - Initialize hardware
- * @hw: Pointer to the HW structure
- * Returns:
- * 0: Successfully
- * Negative value: Failed-EBUSY
- */
-static s32 pch_gbe_plat_init_hw(struct pch_gbe_hw *hw)
-{
- s32 ret_val;
-
- ret_val = pch_gbe_phy_get_id(hw);
- if (ret_val) {
- struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
- netdev_err(adapter->netdev, "pch_gbe_phy_get_id error\n");
- return ret_val;
- }
- pch_gbe_phy_init_setting(hw);
- /* Setup Mac interface option RGMII */
-#ifdef PCH_GBE_MAC_IFOP_RGMII
- pch_gbe_phy_set_rgmii(hw);
-#endif
- return ret_val;
-}
-
static const struct pch_gbe_functions pch_gbe_ops = {
.get_bus_info = pch_gbe_plat_get_bus_info,
- .init_hw = pch_gbe_plat_init_hw,
};
/**
@@ -133,21 +106,3 @@ void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw)
}
hw->func->get_bus_info(hw);
}
-
-/**
- * pch_gbe_hal_init_hw - Initialize hardware
- * @hw: Pointer to the HW structure
- * Returns:
- * 0: Successfully
- * ENOSYS: Function is not registered
- */
-s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw)
-{
- if (!hw->func->init_hw) {
- struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
- netdev_err(adapter->netdev, "ERROR: configuration\n");
- return -ENOSYS;
- }
- return hw->func->init_hw(hw);
-}
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
index 9cd19605f4ff..56cae9cfb5c5 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
@@ -23,6 +23,5 @@
s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw);
void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw);
-s32 pch_gbe_hal_init_hw(struct pch_gbe_hw *hw);
#endif
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 175d6608bdb9..9297a94df999 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -760,14 +760,25 @@ void pch_gbe_reinit_locked(struct pch_gbe_adapter *adapter)
void pch_gbe_reset(struct pch_gbe_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
+ struct pch_gbe_hw *hw = &adapter->hw;
+ s32 ret_val;
- pch_gbe_mac_reset_hw(&adapter->hw);
+ pch_gbe_mac_reset_hw(hw);
/* reprogram multicast address register after reset */
pch_gbe_set_multi(netdev);
/* Setup the receive address. */
- pch_gbe_mac_init_rx_addrs(&adapter->hw, PCH_GBE_MAR_ENTRIES);
- if (pch_gbe_hal_init_hw(&adapter->hw))
- netdev_err(netdev, "Hardware Error\n");
+ pch_gbe_mac_init_rx_addrs(hw, PCH_GBE_MAR_ENTRIES);
+
+ ret_val = pch_gbe_phy_get_id(hw);
+ if (ret_val) {
+ netdev_err(adapter->netdev, "pch_gbe_phy_get_id error\n");
+ return;
+ }
+ pch_gbe_phy_init_setting(hw);
+ /* Setup Mac interface option RGMII */
+#ifdef PCH_GBE_MAC_IFOP_RGMII
+ pch_gbe_phy_set_rgmii(hw);
+#endif
}
/**
--
2.17.1
^ permalink raw reply related
* [PATCH 08/14] net: pch_gbe: Remove get_bus_info HAL abstraction
From: Paul Burton @ 2018-06-23 3:17 UTC (permalink / raw)
To: netdev; +Cc: David S . Miller, Andrew Lunn, Paul Burton
In-Reply-To: <20180623031753.31893-1-paul.burton@mips.com>
For some reason the pch_gbe driver contains a struct pch_gbe_functions
with pointers used by a HAL abstraction layer, even though there is only
one implementation of each function.
This patch removes the get_bus_info abstraction. Its single
implementation (pch_gbe_plat_get_bus_info) only sets values within a
struct pch_gbe_bus_info which is never used, so we simply remove the
call to it in pch_gbe_probe & remove struct pch_gbe_bus_info entirely.
Now that struct pch_gbe_functions is empty we remove it entirely too.
Signed-off-by: Paul Burton <paul.burton@mips.com>
---
.../net/ethernet/oki-semi/pch_gbe/pch_gbe.h | 23 --------
.../ethernet/oki-semi/pch_gbe/pch_gbe_api.c | 58 -------------------
.../ethernet/oki-semi/pch_gbe/pch_gbe_api.h | 1 -
.../ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 1 -
4 files changed, 83 deletions(-)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
index 2e824baff9d7..44c2f291e766 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h
@@ -326,16 +326,6 @@ struct pch_gbe_regs {
#define PCH_GBE_FC_FULL 3
#define PCH_GBE_FC_DEFAULT PCH_GBE_FC_FULL
-
-struct pch_gbe_hw;
-/**
- * struct pch_gbe_functions - HAL APi function pointer
- * @get_bus_info: for pch_gbe_hal_get_bus_info
- */
-struct pch_gbe_functions {
- void (*get_bus_info) (struct pch_gbe_hw *);
-};
-
/**
* struct pch_gbe_mac_info - MAC information
* @addr[6]: Store the MAC address
@@ -376,17 +366,6 @@ struct pch_gbe_phy_info {
u16 autoneg_advertised;
};
-/*!
- * @ingroup Gigabit Ether driver Layer
- * @struct pch_gbe_bus_info
- * @brief Bus information
- */
-struct pch_gbe_bus_info {
- u8 type;
- u8 speed;
- u8 width;
-};
-
/*!
* @ingroup Gigabit Ether driver Layer
* @struct pch_gbe_hw
@@ -398,10 +377,8 @@ struct pch_gbe_hw {
struct pch_gbe_regs __iomem *reg;
spinlock_t miim_lock;
- const struct pch_gbe_functions *func;
struct pch_gbe_mac_info mac;
struct pch_gbe_phy_info phy;
- struct pch_gbe_bus_info bus;
};
/**
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
index 03fbd4752d4f..89c0db27b797 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
@@ -20,47 +20,6 @@
#include "pch_gbe_phy.h"
#include "pch_gbe_api.h"
-/* bus type values */
-#define pch_gbe_bus_type_unknown 0
-#define pch_gbe_bus_type_pci 1
-#define pch_gbe_bus_type_pcix 2
-#define pch_gbe_bus_type_pci_express 3
-#define pch_gbe_bus_type_reserved 4
-
-/* bus speed values */
-#define pch_gbe_bus_speed_unknown 0
-#define pch_gbe_bus_speed_33 1
-#define pch_gbe_bus_speed_66 2
-#define pch_gbe_bus_speed_100 3
-#define pch_gbe_bus_speed_120 4
-#define pch_gbe_bus_speed_133 5
-#define pch_gbe_bus_speed_2500 6
-#define pch_gbe_bus_speed_reserved 7
-
-/* bus width values */
-#define pch_gbe_bus_width_unknown 0
-#define pch_gbe_bus_width_pcie_x1 1
-#define pch_gbe_bus_width_pcie_x2 2
-#define pch_gbe_bus_width_pcie_x4 4
-#define pch_gbe_bus_width_32 5
-#define pch_gbe_bus_width_64 6
-#define pch_gbe_bus_width_reserved 7
-
-/**
- * pch_gbe_plat_get_bus_info - Obtain bus information for adapter
- * @hw: Pointer to the HW structure
- */
-static void pch_gbe_plat_get_bus_info(struct pch_gbe_hw *hw)
-{
- hw->bus.type = pch_gbe_bus_type_pci_express;
- hw->bus.speed = pch_gbe_bus_speed_2500;
- hw->bus.width = pch_gbe_bus_width_pcie_x1;
-}
-
-static const struct pch_gbe_functions pch_gbe_ops = {
- .get_bus_info = pch_gbe_plat_get_bus_info,
-};
-
/**
* pch_gbe_plat_init_function_pointers - Init func ptrs
* @hw: Pointer to the HW structure
@@ -69,8 +28,6 @@ static void pch_gbe_plat_init_function_pointers(struct pch_gbe_hw *hw)
{
/* Set PHY parameter */
hw->phy.reset_delay_us = PCH_GBE_PHY_RESET_DELAY_US;
- /* Set function pointers */
- hw->func = &pch_gbe_ops;
}
/**
@@ -91,18 +48,3 @@ s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw)
pch_gbe_plat_init_function_pointers(hw);
return 0;
}
-
-/**
- * pch_gbe_hal_get_bus_info - Obtain bus information for adapter
- * @hw: Pointer to the HW structure
- */
-void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw)
-{
- if (!hw->func->get_bus_info) {
- struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
- netdev_err(adapter->netdev, "ERROR: configuration\n");
- return;
- }
- hw->func->get_bus_info(hw);
-}
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
index 56cae9cfb5c5..b3b713a32f38 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
@@ -22,6 +22,5 @@
#include "pch_gbe_phy.h"
s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw);
-void pch_gbe_hal_get_bus_info(struct pch_gbe_hw *hw);
#endif
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 9297a94df999..246167dbeacd 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -2635,7 +2635,6 @@ static int pch_gbe_probe(struct pci_dev *pdev,
dev_err(&pdev->dev, "PHY initialize error\n");
goto err_free_adapter;
}
- pch_gbe_hal_get_bus_info(&adapter->hw);
/* Read the MAC address. and store to the private data */
ret = pch_gbe_mac_read_mac_addr(&adapter->hw);
--
2.17.1
^ permalink raw reply related
* [PATCH 09/14] net: pch_gbe: Remove pch_gbe_hal_setup_init_funcs
From: Paul Burton @ 2018-06-23 3:17 UTC (permalink / raw)
To: netdev; +Cc: David S . Miller, Andrew Lunn, Paul Burton
In-Reply-To: <20180623031753.31893-1-paul.burton@mips.com>
The pch_gbe driver calls a pch_gbe_hal_setup_init_funcs function which
ultimately sets the value of one field in struct pch_gbe_phy_info in a
convoluted way.
This patch removes pch_gbe_hal_setup_init_funcs in favor of inlining it,
and in turn its callee pch_gbe_plat_init_function_pointers, into the
single caller pch_gbe_sw_init.
With this pch_gbe_api.c & pch_gbe_api.h are essentially empty, so they
are removed & inclusions of the latter replaced with pch_gbe_phy.h which
was previously being included via pch_gbe_api.h.
Signed-off-by: Paul Burton <paul.burton@mips.com>
---
.../net/ethernet/oki-semi/pch_gbe/Makefile | 2 +-
.../ethernet/oki-semi/pch_gbe/pch_gbe_api.c | 50 -------------------
.../ethernet/oki-semi/pch_gbe/pch_gbe_api.h | 26 ----------
.../oki-semi/pch_gbe/pch_gbe_ethtool.c | 2 +-
.../ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 8 +--
5 files changed, 4 insertions(+), 84 deletions(-)
delete mode 100644 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
delete mode 100644 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/Makefile b/drivers/net/ethernet/oki-semi/pch_gbe/Makefile
index 31288d4ad248..862de0f3bc41 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/Makefile
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/Makefile
@@ -1,4 +1,4 @@
obj-$(CONFIG_PCH_GBE) += pch_gbe.o
pch_gbe-y := pch_gbe_phy.o pch_gbe_ethtool.o pch_gbe_param.o
-pch_gbe-y += pch_gbe_api.o pch_gbe_main.o
+pch_gbe-y += pch_gbe_main.o
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
deleted file mode 100644
index 89c0db27b797..000000000000
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) 1999 - 2010 Intel Corporation.
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
- *
- * This code was derived from the Intel e1000e Linux driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
- */
-#include "pch_gbe.h"
-#include "pch_gbe_phy.h"
-#include "pch_gbe_api.h"
-
-/**
- * pch_gbe_plat_init_function_pointers - Init func ptrs
- * @hw: Pointer to the HW structure
- */
-static void pch_gbe_plat_init_function_pointers(struct pch_gbe_hw *hw)
-{
- /* Set PHY parameter */
- hw->phy.reset_delay_us = PCH_GBE_PHY_RESET_DELAY_US;
-}
-
-/**
- * pch_gbe_hal_setup_init_funcs - Initializes function pointers
- * @hw: Pointer to the HW structure
- * Returns:
- * 0: Successfully
- * ENOSYS: Function is not registered
- */
-s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw)
-{
- if (!hw->reg) {
- struct pch_gbe_adapter *adapter = pch_gbe_hw_to_adapter(hw);
-
- netdev_err(adapter->netdev, "ERROR: Registers not mapped\n");
- return -ENOSYS;
- }
- pch_gbe_plat_init_function_pointers(hw);
- return 0;
-}
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
deleted file mode 100644
index b3b713a32f38..000000000000
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 1999 - 2010 Intel Corporation.
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
- *
- * This code was derived from the Intel e1000e Linux driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef _PCH_GBE_API_H_
-#define _PCH_GBE_API_H_
-
-#include "pch_gbe_phy.h"
-
-s32 pch_gbe_hal_setup_init_funcs(struct pch_gbe_hw *hw);
-
-#endif
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
index da39d771ad87..a7bdb53790ff 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
@@ -17,7 +17,7 @@
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "pch_gbe.h"
-#include "pch_gbe_api.h"
+#include "pch_gbe_phy.h"
/**
* pch_gbe_stats - Stats item information
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 246167dbeacd..5846e8cf1750 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -18,7 +18,7 @@
*/
#include "pch_gbe.h"
-#include "pch_gbe_api.h"
+#include "pch_gbe_phy.h"
#include <linux/module.h>
#include <linux/net_tstamp.h>
#include <linux/ptp_classify.h>
@@ -2037,12 +2037,8 @@ static int pch_gbe_sw_init(struct pch_gbe_adapter *adapter)
adapter->rx_buffer_len = PCH_GBE_FRAME_SIZE_2048;
hw->mac.max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
hw->mac.min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+ hw->phy.reset_delay_us = PCH_GBE_PHY_RESET_DELAY_US;
- /* Initialize the hardware-specific values */
- if (pch_gbe_hal_setup_init_funcs(hw)) {
- netdev_err(netdev, "Hardware Initialization Failure\n");
- return -EIO;
- }
if (pch_gbe_alloc_queues(adapter)) {
netdev_err(netdev, "Unable to allocate memory for queues\n");
return -ENOMEM;
--
2.17.1
^ permalink raw reply related
* [PATCH 10/14] net: pch_gbe: Remove PCH_GBE_MAC_IFOP_RGMII define
From: Paul Burton @ 2018-06-23 3:17 UTC (permalink / raw)
To: netdev; +Cc: David S . Miller, Andrew Lunn, Paul Burton
In-Reply-To: <20180623031753.31893-1-paul.burton@mips.com>
The pch_gbe driver currently presumes that the PHY is connected using
RGMII, and would need further work to support other buses. It includes a
define which is always set that conditionalises some of the
RGMII-specific code regardless. Remove it. If we do ever support
different MII buses then preprocessor defines won't be the best way to
select between them anyway.
Signed-off-by: Paul Burton <paul.burton@mips.com>
---
drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 9 ---------
drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h | 1 -
2 files changed, 10 deletions(-)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 5846e8cf1750..11c42aa42b8a 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -366,9 +366,7 @@ static void pch_gbe_mac_reset_hw(struct pch_gbe_hw *hw)
/* Read the MAC address. and store to the private data */
pch_gbe_mac_read_mac_addr(hw);
iowrite32(PCH_GBE_ALL_RST, &hw->reg->RESET);
-#ifdef PCH_GBE_MAC_IFOP_RGMII
iowrite32(PCH_GBE_MODE_GMII_ETHER, &hw->reg->MODE);
-#endif
pch_gbe_wait_clr_bit(&hw->reg->RESET, PCH_GBE_ALL_RST);
/* Setup the receive addresses */
pch_gbe_mac_mar_set(hw, hw->mac.addr, 0);
@@ -776,9 +774,7 @@ void pch_gbe_reset(struct pch_gbe_adapter *adapter)
}
pch_gbe_phy_init_setting(hw);
/* Setup Mac interface option RGMII */
-#ifdef PCH_GBE_MAC_IFOP_RGMII
pch_gbe_phy_set_rgmii(hw);
-#endif
}
/**
@@ -1044,7 +1040,6 @@ static void pch_gbe_set_rgmii_ctrl(struct pch_gbe_adapter *adapter, u16 speed,
unsigned long rgmii = 0;
/* Set the RGMII control. */
-#ifdef PCH_GBE_MAC_IFOP_RGMII
switch (speed) {
case SPEED_10:
rgmii = (PCH_GBE_RGMII_RATE_2_5M |
@@ -1060,10 +1055,6 @@ static void pch_gbe_set_rgmii_ctrl(struct pch_gbe_adapter *adapter, u16 speed,
break;
}
iowrite32(rgmii, &hw->reg->RGMII_CTRL);
-#else /* GMII */
- rgmii = 0;
- iowrite32(rgmii, &hw->reg->RGMII_CTRL);
-#endif
}
static void pch_gbe_set_mode(struct pch_gbe_adapter *adapter, u16 speed,
u16 duplex)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
index efb955be8cac..23ac38711619 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
@@ -21,7 +21,6 @@
#define PCH_GBE_PHY_REGS_LEN 32
#define PCH_GBE_PHY_RESET_DELAY_US 10
-#define PCH_GBE_MAC_IFOP_RGMII
s32 pch_gbe_phy_get_id(struct pch_gbe_hw *hw);
s32 pch_gbe_phy_read_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 *data);
--
2.17.1
^ permalink raw reply related
* [PATCH 11/14] net: pch_gbe: Remove dead RINGFREE code
From: Paul Burton @ 2018-06-23 3:17 UTC (permalink / raw)
To: netdev; +Cc: David S . Miller, Andrew Lunn, Paul Burton
In-Reply-To: <20180623031753.31893-1-paul.burton@mips.com>
The pch_gbe driver includes some code which appears to be an attempt to
work around a problem with the pch_gbe_free_rx_resources &
pch_gbe_free_tx_resources functions that no longer exists. Remove the
code guarded by the never-defined RINGFREE preprocessor macro.
Signed-off-by: Paul Burton <paul.burton@mips.com>
---
.../net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c | 13 -------------
1 file changed, 13 deletions(-)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
index a7bdb53790ff..adaa0024adfe 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c
@@ -349,25 +349,12 @@ static int pch_gbe_set_ringparam(struct net_device *netdev,
err = pch_gbe_setup_tx_resources(adapter, adapter->tx_ring);
if (err)
goto err_setup_tx;
- /* save the new, restore the old in order to free it,
- * then restore the new back again */
-#ifdef RINGFREE
- adapter->rx_ring = rx_old;
- adapter->tx_ring = tx_old;
- pch_gbe_free_rx_resources(adapter, adapter->rx_ring);
- pch_gbe_free_tx_resources(adapter, adapter->tx_ring);
- kfree(tx_old);
- kfree(rx_old);
- adapter->rx_ring = rxdr;
- adapter->tx_ring = txdr;
-#else
pch_gbe_free_rx_resources(adapter, rx_old);
pch_gbe_free_tx_resources(adapter, tx_old);
kfree(tx_old);
kfree(rx_old);
adapter->rx_ring = rxdr;
adapter->tx_ring = txdr;
-#endif
err = pch_gbe_up(adapter);
}
return err;
--
2.17.1
^ permalink raw reply related
* [PATCH 12/14] net: pch_gbe: Use module_pci_driver()
From: Paul Burton @ 2018-06-23 3:17 UTC (permalink / raw)
To: netdev; +Cc: David S . Miller, Andrew Lunn, Paul Burton
In-Reply-To: <20180623031753.31893-1-paul.burton@mips.com>
Make use of the module_pci_driver() macro to remove some needless
boilerplate code from the pch_gbe driver. This does have the side effect
of removing the print of the driver's version during probe, but this is
pretty useless information anyway - the version has changed only once
whilst the driver has been in mainline, despite many changes being made
to it before and since.
Signed-off-by: Paul Burton <paul.burton@mips.com>
---
.../ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 19 +------------------
1 file changed, 1 insertion(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 11c42aa42b8a..3f2dd36d45ad 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -2770,24 +2770,7 @@ static struct pci_driver pch_gbe_driver = {
.shutdown = pch_gbe_shutdown,
.err_handler = &pch_gbe_err_handler
};
-
-
-static int __init pch_gbe_init_module(void)
-{
- int ret;
-
- pr_info("EG20T PCH Gigabit Ethernet Driver - version %s\n",DRV_VERSION);
- ret = pci_register_driver(&pch_gbe_driver);
- return ret;
-}
-
-static void __exit pch_gbe_exit_module(void)
-{
- pci_unregister_driver(&pch_gbe_driver);
-}
-
-module_init(pch_gbe_init_module);
-module_exit(pch_gbe_exit_module);
+module_pci_driver(pch_gbe_driver);
MODULE_DESCRIPTION("EG20T PCH Gigabit ethernet Driver");
MODULE_AUTHOR("LAPIS SEMICONDUCTOR, <tshimizu818@gmail.com>");
--
2.17.1
^ permalink raw reply related
* [PATCH 13/14] net: pch_gbe: Inline pch_gbe_mac_mc_addr_list_update
From: Paul Burton @ 2018-06-23 3:17 UTC (permalink / raw)
To: netdev; +Cc: David S . Miller, Andrew Lunn, Paul Burton
In-Reply-To: <20180623031753.31893-1-paul.burton@mips.com>
The pch_gbe driver sets up multicast address filters using a convoluted
mechanism by which pch_gbe_set_multi allocates an array to hold
multicast addresses, copies desired addresses into that array, calls a
pch_gbe_mac_mc_addr_list_update function which copies addresses out of
that array into MAC registers, then frees the array.
This patch simplifies this somewhat by inlining
pch_gbe_mac_mc_addr_list_update into pch_gbe_set_multi, and removing the
requirement for the MAC addresses to stored consecutively in a single
array.
Signed-off-by: Paul Burton <paul.burton@mips.com>
---
.../ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 73 +++++--------------
1 file changed, 19 insertions(+), 54 deletions(-)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 3f2dd36d45ad..dc8c4050fad3 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -411,44 +411,6 @@ static void pch_gbe_mac_init_rx_addrs(struct pch_gbe_hw *hw, u16 mar_count)
pch_gbe_wait_clr_bit(&hw->reg->ADDR_MASK, PCH_GBE_BUSY);
}
-
-/**
- * pch_gbe_mac_mc_addr_list_update - Update Multicast addresses
- * @hw: Pointer to the HW structure
- * @mc_addr_list: Array of multicast addresses to program
- * @mc_addr_count: Number of multicast addresses to program
- * @mar_used_count: The first MAC Address register free to program
- * @mar_total_num: Total number of supported MAC Address Registers
- */
-static void pch_gbe_mac_mc_addr_list_update(struct pch_gbe_hw *hw,
- u8 *mc_addr_list, u32 mc_addr_count,
- u32 mar_used_count, u32 mar_total_num)
-{
- u32 i, adrmask;
-
- /* Load the first set of multicast addresses into the exact
- * filters (RAR). If there are not enough to fill the RAR
- * array, clear the filters.
- */
- for (i = mar_used_count; i < mar_total_num; i++) {
- if (mc_addr_count) {
- pch_gbe_mac_mar_set(hw, mc_addr_list, i);
- mc_addr_count--;
- mc_addr_list += ETH_ALEN;
- } else {
- /* Clear MAC address mask */
- adrmask = ioread32(&hw->reg->ADDR_MASK);
- iowrite32((adrmask | (0x0001 << i)),
- &hw->reg->ADDR_MASK);
- /* wait busy */
- pch_gbe_wait_clr_bit(&hw->reg->ADDR_MASK, PCH_GBE_BUSY);
- /* Clear MAC address */
- iowrite32(0, &hw->reg->mac_adr[i].high);
- iowrite32(0, &hw->reg->mac_adr[i].low);
- }
- }
-}
-
/**
* pch_gbe_mac_force_mac_fc - Force the MAC's flow control settings
* @hw: Pointer to the HW structure
@@ -2143,10 +2105,8 @@ static void pch_gbe_set_multi(struct net_device *netdev)
struct pch_gbe_adapter *adapter = netdev_priv(netdev);
struct pch_gbe_hw *hw = &adapter->hw;
struct netdev_hw_addr *ha;
- u8 *mta_list;
- u32 rctl;
- int i;
- int mc_count;
+ u32 rctl, adrmask;
+ int mc_count, i;
netdev_dbg(netdev, "netdev->flags : 0x%08x\n", netdev->flags);
@@ -2173,20 +2133,25 @@ static void pch_gbe_set_multi(struct net_device *netdev)
if (mc_count >= PCH_GBE_MAR_ENTRIES)
return;
- mta_list = kmalloc_array(ETH_ALEN, mc_count, GFP_ATOMIC);
- if (!mta_list)
- return;
- /* The shared function expects a packed array of only addresses. */
- i = 0;
- netdev_for_each_mc_addr(ha, netdev) {
- if (i == mc_count)
- break;
- memcpy(mta_list + (i++ * ETH_ALEN), &ha->addr, ETH_ALEN);
+ /* Load the first set of multicast addresses into MAC address registers
+ * for use by hardware filtering.
+ */
+ i = 1;
+ netdev_for_each_mc_addr(ha, netdev)
+ pch_gbe_mac_mar_set(hw, ha->addr, i++);
+
+ /* If there are spare MAC registers, mask & clear them */
+ for (; i < PCH_GBE_MAR_ENTRIES; i++) {
+ /* Clear MAC address mask */
+ adrmask = ioread32(&hw->reg->ADDR_MASK);
+ iowrite32(adrmask | BIT(i), &hw->reg->ADDR_MASK);
+ /* wait busy */
+ pch_gbe_wait_clr_bit(&hw->reg->ADDR_MASK, PCH_GBE_BUSY);
+ /* Clear MAC address */
+ iowrite32(0, &hw->reg->mac_adr[i].high);
+ iowrite32(0, &hw->reg->mac_adr[i].low);
}
- pch_gbe_mac_mc_addr_list_update(hw, mta_list, i, 1,
- PCH_GBE_MAR_ENTRIES);
- kfree(mta_list);
netdev_dbg(netdev,
"RX_MODE reg(check bit31,30 ADD,MLT) : 0x%08x netdev->mc_count : 0x%08x\n",
--
2.17.1
^ permalink raw reply related
* [PATCH 14/14] net: pch_gbe: Clean up pch_gbe_set_multi
From: Paul Burton @ 2018-06-23 3:17 UTC (permalink / raw)
To: netdev; +Cc: David S . Miller, Andrew Lunn, Paul Burton
In-Reply-To: <20180623031753.31893-1-paul.burton@mips.com>
Refactor pch_gbe_set_multi in order to avoid unnecessary indentation &
make it clearer what the code is doing.
The one behavioral change from this patch is that we'll no longer
configure the MAC address registers for multicast addresses when the
IFF_PROMISC or IFF_ALLMULTI flags are set. In these cases, just as when
we want to monitor more multicast addresses than we have MAC address
registers, we disable multicast filtering so the MAC address registers
are unused.
Signed-off-by: Paul Burton <paul.burton@mips.com>
---
.../ethernet/oki-semi/pch_gbe/pch_gbe_main.c | 33 +++++++++----------
1 file changed, 16 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index dc8c4050fad3..43c0c10dfeb7 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -2110,28 +2110,27 @@ static void pch_gbe_set_multi(struct net_device *netdev)
netdev_dbg(netdev, "netdev->flags : 0x%08x\n", netdev->flags);
- /* Check for Promiscuous and All Multicast modes */
+ /* By default enable address & multicast filtering */
rctl = ioread32(&hw->reg->RX_MODE);
+ rctl |= PCH_GBE_ADD_FIL_EN | PCH_GBE_MLT_FIL_EN;
+
+ /* Promiscuous mode disables all hardware address filtering */
+ if (netdev->flags & IFF_PROMISC)
+ rctl &= ~(PCH_GBE_ADD_FIL_EN | PCH_GBE_MLT_FIL_EN);
+
+ /* If we want to monitor more multicast addresses than the hardware can
+ * support then disable hardware multicast filtering.
+ */
mc_count = netdev_mc_count(netdev);
- if ((netdev->flags & IFF_PROMISC)) {
- rctl &= ~PCH_GBE_ADD_FIL_EN;
+ if ((netdev->flags & IFF_ALLMULTI) || mc_count >= PCH_GBE_MAR_ENTRIES)
rctl &= ~PCH_GBE_MLT_FIL_EN;
- } else if ((netdev->flags & IFF_ALLMULTI)) {
- /* all the multicasting receive permissions */
- rctl |= PCH_GBE_ADD_FIL_EN;
- rctl &= ~PCH_GBE_MLT_FIL_EN;
- } else {
- if (mc_count >= PCH_GBE_MAR_ENTRIES) {
- /* all the multicasting receive permissions */
- rctl |= PCH_GBE_ADD_FIL_EN;
- rctl &= ~PCH_GBE_MLT_FIL_EN;
- } else {
- rctl |= (PCH_GBE_ADD_FIL_EN | PCH_GBE_MLT_FIL_EN);
- }
- }
+
iowrite32(rctl, &hw->reg->RX_MODE);
- if (mc_count >= PCH_GBE_MAR_ENTRIES)
+ /* If we're not using multicast filtering then there's no point
+ * configuring the unused MAC address registers.
+ */
+ if (!(rctl & PCH_GBE_MLT_FIL_EN))
return;
/* Load the first set of multicast addresses into MAC address registers
--
2.17.1
^ permalink raw reply related
* Re: [PATCH net-next 3/4] netdevsim: add ipsec offload testing
From: Jakub Kicinski @ 2018-06-23 4:07 UTC (permalink / raw)
To: Shannon Nelson; +Cc: davem, netdev, anders.roxell, linux-kselftest
In-Reply-To: <1529713898-9200-4-git-send-email-shannon.nelson@oracle.com>
On Fri, 22 Jun 2018 17:31:37 -0700, Shannon Nelson wrote:
> Implement the IPsec/XFRM offload API for testing.
>
> Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Thanks for the patch! Just a number of stylistic nit picks.
> diff --git a/drivers/net/netdevsim/ipsec.c b/drivers/net/netdevsim/ipsec.c
> new file mode 100644
> index 0000000..ad64266
> --- /dev/null
> +++ b/drivers/net/netdevsim/ipsec.c
> @@ -0,0 +1,345 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright(c) 2018 Oracle and/or its affiliates. All rights reserved. */
> +
> +#include <net/xfrm.h>
> +#include <crypto/aead.h>
> +#include <linux/debugfs.h>
> +#include "netdevsim.h"
Other files in the driver sort headers alphabetically and put an empty
line between global and local headers.
> +#define NSIM_IPSEC_AUTH_BITS 128
> +
> +/**
> + * nsim_ipsec_dbg_read - read for ipsec data
> + * @filp: the opened file
> + * @buffer: where to write the data for the user to read
> + * @count: the size of the user's buffer
> + * @ppos: file position offset
> + **/
> +static ssize_t nsim_dbg_netdev_ops_read(struct file *filp,
Doesn't match the kdoc. Please run
./scripts/kernel-doc -none $file
if you want kdoc. Although IMHO you may as well drop the kdoc, your
code is quite self explanatory and local.
> + char __user *buffer,
> + size_t count, loff_t *ppos)
> +{
> + struct netdevsim *ns = filp->private_data;
> + struct nsim_ipsec *ipsec = &ns->ipsec;
> + size_t bufsize;
> + char *buf, *p;
> + int len;
> + int i;
> +
> + /* don't allow partial reads */
> + if (*ppos != 0)
> + return 0;
> +
> + /* the buffer needed is
> + * (num SAs * 3 lines each * ~60 bytes per line) + one more line
> + */
> + bufsize = (ipsec->count * 4 * 60) + 60;
> + buf = kzalloc(bufsize, GFP_KERNEL);
> + if (!buf)
> + return -ENOMEM;
> +
> + p = buf;
> + p += snprintf(p, bufsize - (p - buf),
> + "SA count=%u tx=%u\n",
> + ipsec->count, ipsec->tx);
> +
> + for (i = 0; i < NSIM_IPSEC_MAX_SA_COUNT; i++) {
> + struct nsim_sa *sap = &ipsec->sa[i];
> +
> + if (!sap->used)
> + continue;
> +
> + p += snprintf(p, bufsize - (p - buf),
> + "sa[%i] %cx ipaddr=0x%08x %08x %08x %08x\n",
> + i, (sap->rx ? 'r' : 't'), sap->ipaddr[0],
> + sap->ipaddr[1], sap->ipaddr[2], sap->ipaddr[3]);
> + p += snprintf(p, bufsize - (p - buf),
> + "sa[%i] spi=0x%08x proto=0x%x salt=0x%08x crypt=%d\n",
> + i, be32_to_cpu(sap->xs->id.spi),
> + sap->xs->id.proto, sap->salt, sap->crypt);
> + p += snprintf(p, bufsize - (p - buf),
> + "sa[%i] key=0x%08x %08x %08x %08x\n",
> + i, sap->key[0], sap->key[1],
> + sap->key[2], sap->key[3]);
> + }
> +
> + len = simple_read_from_buffer(buffer, count, ppos, buf, p - buf);
Why not seq_file for this?
> + kfree(buf);
> + return len;
> +}
> +
> +static const struct file_operations ipsec_dbg_fops = {
> + .owner = THIS_MODULE,
> + .open = simple_open,
> + .read = nsim_dbg_netdev_ops_read,
> +};
> +
> +/**
> + * nsim_ipsec_find_empty_idx - find the first unused security parameter index
> + * @ipsec: pointer to ipsec struct
> + **/
> +static int nsim_ipsec_find_empty_idx(struct nsim_ipsec *ipsec)
> +{
> + u32 i;
> +
> + if (ipsec->count == NSIM_IPSEC_MAX_SA_COUNT)
> + return -ENOSPC;
> +
> + /* search sa table */
> + for (i = 0; i < NSIM_IPSEC_MAX_SA_COUNT; i++) {
> + if (!ipsec->sa[i].used)
> + return i;
> + }
> +
> + return -ENOSPC;
FWIW I personally find bitmaps and find_first_zero_bit() etc. nice and
concise for a small ID allocator, but no objection to open coding.
> +}
> +
> +/**
> + * nsim_ipsec_parse_proto_keys - find the key and salt based on the protocol
> + * @xs: pointer to xfrm_state struct
> + * @mykey: pointer to key array to populate
> + * @mysalt: pointer to salt value to populate
> + *
> + * This copies the protocol keys and salt to our own data tables. The
> + * 82599 family only supports the one algorithm.
82599 is a fine chip, it's not netdevsim tho? ;)
> + **/
> +static int nsim_ipsec_parse_proto_keys(struct xfrm_state *xs,
> + u32 *mykey, u32 *mysalt)
> +{
> + struct net_device *dev = xs->xso.dev;
> + unsigned char *key_data;
> + char *alg_name = NULL;
> + const char aes_gcm_name[] = "rfc4106(gcm(aes))";
> + int key_len;
reverse xmas tree please
> +
> + if (!xs->aead) {
> + netdev_err(dev, "Unsupported IPsec algorithm\n");
> + return -EINVAL;
> + }
> +
> + if (xs->aead->alg_icv_len != NSIM_IPSEC_AUTH_BITS) {
> + netdev_err(dev, "IPsec offload requires %d bit authentication\n",
> + NSIM_IPSEC_AUTH_BITS);
> + return -EINVAL;
> + }
> +
> + key_data = &xs->aead->alg_key[0];
> + key_len = xs->aead->alg_key_len;
> + alg_name = xs->aead->alg_name;
> +
> + if (strcmp(alg_name, aes_gcm_name)) {
> + netdev_err(dev, "Unsupported IPsec algorithm - please use %s\n",
> + aes_gcm_name);
> + return -EINVAL;
> + }
> +
> + /* The key bytes come down in a bigendian array of bytes, so
> + * we don't need to do any byteswapping.
Why the mention of bigendian? 82599 needs big endian? -.^
> + * 160 accounts for 16 byte key and 4 byte salt
> + */
> + if (key_len > 128) {
s/128/NSIM_IPSEC_AUTH_BITS/ ?
> + *mysalt = ((u32 *)key_data)[4];
Is alignment guaranteed? There are the unaligned helpers if you need
them..
> + } else if (key_len == 128) {
> + *mysalt = 0;
> + } else {
> + netdev_err(dev, "IPsec hw offload only supports 128 bit keys with optional 32 bit salt\n");
> + return -EINVAL;
> + }
> + memcpy(mykey, key_data, 16);
> +
> + return 0;
> +}
> +
> +/**
> + * nsim_ipsec_add_sa - program device with a security association
> + * @xs: pointer to transformer state struct
> + **/
> +static int nsim_ipsec_add_sa(struct xfrm_state *xs)
> +{
> + struct net_device *dev = xs->xso.dev;
> + struct netdevsim *ns = netdev_priv(dev);
> + struct nsim_ipsec *ipsec = &ns->ipsec;
xmas tree again (initialize out of line if you have to)
> + struct nsim_sa sa;
> + u16 sa_idx;
> + int ret;
> +
> + if (xs->id.proto != IPPROTO_ESP && xs->id.proto != IPPROTO_AH) {
> + netdev_err(dev, "Unsupported protocol 0x%04x for ipsec offload\n",
> + xs->id.proto);
> + return -EINVAL;
> + }
> +
> + if (xs->calg) {
> + netdev_err(dev, "Compression offload not supported\n");
> + return -EINVAL;
> + }
> +
> + /* find the first unused index */
> + ret = nsim_ipsec_find_empty_idx(ipsec);
> + if (ret < 0) {
> + netdev_err(dev, "No space for SA in Rx table!\n");
> + return ret;
> + }
> + sa_idx = (u16)ret;
> +
> + memset(&sa, 0, sizeof(sa));
> + sa.used = true;
> + sa.xs = xs;
> +
> + if (sa.xs->id.proto & IPPROTO_ESP)
> + sa.crypt = xs->ealg || xs->aead;
> +
> + /* get the key and salt */
> + ret = nsim_ipsec_parse_proto_keys(xs, sa.key, &sa.salt);
> + if (ret) {
> + netdev_err(dev, "Failed to get key data for SA table\n");
> + return ret;
> + }
> +
> + if (xs->xso.flags & XFRM_OFFLOAD_INBOUND) {
> + sa.rx = true;
> +
> + if (xs->props.family == AF_INET6)
> + memcpy(sa.ipaddr, &xs->id.daddr.a6, 16);
> + else
> + memcpy(&sa.ipaddr[3], &xs->id.daddr.a4, 4);
> + }
> +
> + /* the preparations worked, so save the info */
> + memcpy(&ipsec->sa[sa_idx], &sa, sizeof(sa));
> +
> + /* the XFRM stack doesn't like offload_handle == 0,
> + * so add a bitflag in case our array index is 0
> + */
> + xs->xso.offload_handle = sa_idx | NSIM_IPSEC_VALID;
> + ipsec->count++;
> +
> + return 0;
> +}
> +
> +/**
> + * nsim_ipsec_del_sa - clear out this specific SA
> + * @xs: pointer to transformer state struct
> + **/
> +static void nsim_ipsec_del_sa(struct xfrm_state *xs)
> +{
> + struct net_device *dev = xs->xso.dev;
> + struct netdevsim *ns = netdev_priv(dev);
> + struct nsim_ipsec *ipsec = &ns->ipsec;
> + u16 sa_idx;
> +
> + sa_idx = xs->xso.offload_handle & ~NSIM_IPSEC_VALID;
> + if (!ipsec->sa[sa_idx].used) {
> + netdev_err(dev, "Invalid SA for delete sa_idx=%d\n", sa_idx);
> + return;
> + }
> +
> + memset(&ipsec->sa[sa_idx], 0, sizeof(struct nsim_sa));
> + ipsec->count--;
> +}
> +
> +/**
> + * nsim_ipsec_offload_ok - can this packet use the xfrm hw offload
> + * @skb: current data packet
> + * @xs: pointer to transformer state struct
> + **/
> +static bool nsim_ipsec_offload_ok(struct sk_buff *skb, struct xfrm_state *xs)
> +{
> + struct net_device *dev = xs->xso.dev;
> + struct netdevsim *ns = netdev_priv(dev);
> + struct nsim_ipsec *ipsec = &ns->ipsec;
> +
> + ipsec->ok++;
> +
> + return true;
> +}
> +
> +static const struct xfrmdev_ops nsim_xfrmdev_ops = {
> + .xdo_dev_state_add = nsim_ipsec_add_sa,
> + .xdo_dev_state_delete = nsim_ipsec_del_sa,
> + .xdo_dev_offload_ok = nsim_ipsec_offload_ok,
Please align the initializers by adding tabs before '='.
> +};
> +
> +/**
> + * nsim_ipsec_tx - check Tx packet for ipsec offload
> + * @ns: pointer to ns structure
> + * @skb: current data packet
> + **/
> +int nsim_ipsec_tx(struct netdevsim *ns, struct sk_buff *skb)
> +{
> + struct nsim_ipsec *ipsec = &ns->ipsec;
> + struct xfrm_state *xs;
> + struct nsim_sa *tsa;
> + u32 sa_idx;
> +
> + /* do we even need to check this packet? */
> + if (!skb->sp)
> + return 1;
> +
> + if (unlikely(!skb->sp->len)) {
> + netdev_err(ns->netdev, "%s: no xfrm state len = %d\n",
> + __func__, skb->sp->len);
Hmm.. __func__ started appearing in errors? Perhaps either always or
never add it?
Also, I know this is not a real device, but please always use rate
limited print functions on the data path.
> + return 0;
> + }
> +
> + xs = xfrm_input_state(skb);
> + if (unlikely(!xs)) {
> + netdev_err(ns->netdev, "%s: no xfrm_input_state() xs = %p\n",
> + __func__, xs);
> + return 0;
> + }
> +
> + sa_idx = xs->xso.offload_handle & ~NSIM_IPSEC_VALID;
> + if (unlikely(sa_idx > NSIM_IPSEC_MAX_SA_COUNT)) {
> + netdev_err(ns->netdev, "%s: bad sa_idx=%d max=%d\n",
> + __func__, sa_idx, NSIM_IPSEC_MAX_SA_COUNT);
> + return 0;
> + }
> +
> + tsa = &ipsec->sa[sa_idx];
> + if (unlikely(!tsa->used)) {
> + netdev_err(ns->netdev, "%s: unused sa_idx=%d\n",
> + __func__, sa_idx);
> + return 0;
> + }
> +
> + if (xs->id.proto != IPPROTO_ESP && xs->id.proto != IPPROTO_AH) {
> + netdev_err(ns->netdev, "%s: unexpected proto=%d\n",
> + __func__, xs->id.proto);
> + return 0;
> + }
> +
> + ipsec->tx++;
> +
> + return 1;
> +}
Looks like the function should return bool?
> +
> +/**
> + * nsim_ipsec_init - initialize security registers for IPSec operation
> + * @ns: board private structure
"board"? Yes, the kdoc may be best removed ;)
> + **/
> +void nsim_ipsec_init(struct netdevsim *ns)
> +{
> + ns->netdev->xfrmdev_ops = &nsim_xfrmdev_ops;
> +
> +#define NSIM_ESP_FEATURES (NETIF_F_HW_ESP | \
> + NETIF_F_HW_ESP_TX_CSUM | \
> + NETIF_F_GSO_ESP)
> +
> + ns->netdev->features |= NSIM_ESP_FEATURES;
> + ns->netdev->hw_enc_features |= NSIM_ESP_FEATURES;
> +
> + ns->ipsec.pfile = debugfs_create_file("ipsec", 0400, ns->ddir, ns,
> + &ipsec_dbg_fops);
> +}
> +
> +void nsim_ipsec_teardown(struct netdevsim *ns)
> +{
> + struct nsim_ipsec *ipsec = &ns->ipsec;
> +
> + if (ipsec->count)
> + netdev_err(ns->netdev, "%s: tearing down IPsec offload with %d SAs left\n",
> + __func__, ipsec->count);
> + debugfs_remove_recursive(ipsec->pfile);
> +}
> diff --git a/drivers/net/netdevsim/netdev.c b/drivers/net/netdevsim/netdev.c
> index ec68f38..6ce8604d 100644
> --- a/drivers/net/netdevsim/netdev.c
> +++ b/drivers/net/netdevsim/netdev.c
> @@ -171,6 +171,8 @@ static int nsim_init(struct net_device *dev)
> if (err)
> goto err_unreg_dev;
>
> + nsim_ipsec_init(ns);
> +
> return 0;
>
> err_unreg_dev:
> @@ -186,6 +188,7 @@ static void nsim_uninit(struct net_device *dev)
> {
> struct netdevsim *ns = netdev_priv(dev);
>
> + nsim_ipsec_teardown(ns);
> nsim_devlink_teardown(ns);
> debugfs_remove_recursive(ns->ddir);
> nsim_bpf_uninit(ns);
> @@ -203,11 +206,15 @@ static netdev_tx_t nsim_start_xmit(struct sk_buff *skb, struct net_device *dev)
> {
> struct netdevsim *ns = netdev_priv(dev);
>
> + if (!nsim_ipsec_tx(ns, skb))
> + goto out;
> +
> u64_stats_update_begin(&ns->syncp);
> ns->tx_packets++;
> ns->tx_bytes += skb->len;
> u64_stats_update_end(&ns->syncp);
>
> +out:
> dev_kfree_skb(skb);
>
> return NETDEV_TX_OK;
> diff --git a/drivers/net/netdevsim/netdevsim.h b/drivers/net/netdevsim/netdevsim.h
> index 3a8581a..1708dee 100644
> --- a/drivers/net/netdevsim/netdevsim.h
> +++ b/drivers/net/netdevsim/netdevsim.h
> @@ -29,6 +29,29 @@ struct bpf_prog;
> struct dentry;
> struct nsim_vf_config;
>
> +#if IS_ENABLED(CONFIG_XFRM_OFFLOAD)
> +#define NSIM_IPSEC_MAX_SA_COUNT 33
33 caught my eye - out of curiosity is it 2^5 + 1 to catch some type of
bug or failure mode?
> +#define NSIM_IPSEC_VALID BIT(31)
> +
> +struct nsim_sa {
> + struct xfrm_state *xs;
> + __be32 ipaddr[4];
> + u32 key[4];
> + u32 salt;
> + bool used;
> + bool crypt;
> + bool rx;
> +};
> +
> +struct nsim_ipsec {
> + struct nsim_sa sa[NSIM_IPSEC_MAX_SA_COUNT];
> + struct dentry *pfile;
> + u32 count;
> + u32 tx;
> + u32 ok;
> +};
> +#endif
No need to wrap struct definitions in #if/#endif.
> struct netdevsim {
> struct net_device *netdev;
>
> @@ -67,6 +90,9 @@ struct netdevsim {
> #if IS_ENABLED(CONFIG_NET_DEVLINK)
> struct devlink *devlink;
> #endif
> +#if IS_ENABLED(CONFIG_XFRM_OFFLOAD)
> + struct nsim_ipsec ipsec;
> +#endif
> };
>
> extern struct dentry *nsim_ddir;
> @@ -147,6 +173,17 @@ static inline void nsim_devlink_exit(void)
> }
> #endif
>
> +#if IS_ENABLED(CONFIG_XFRM_OFFLOAD)
> +void nsim_ipsec_init(struct netdevsim *ns);
> +void nsim_ipsec_teardown(struct netdevsim *ns);
> +int nsim_ipsec_tx(struct netdevsim *ns, struct sk_buff *skb);
> +#else
> +static inline void nsim_ipsec_init(struct netdevsim *ns) {};
> +static inline void nsim_ipsec_teardown(struct netdevsim *ns) {};
> +static inline int nsim_ipsec_tx(struct netdevsim *ns, struct sk_buff *skb)
> + { return 1; };
Please use the same formatting for static inlines as the rest of the
file. The ';' are also unnecessary.
Other than those formatting nit picks looks good to me :)
^ permalink raw reply
* Re: [bpf PATCH v3 1/4] bpf: sockmap, fix crash when ipv6 sock is added
From: Martin KaFai Lau @ 2018-06-23 7:44 UTC (permalink / raw)
To: John Fastabend; +Cc: ast, daniel, netdev
In-Reply-To: <20180622152134.24502.31858.stgit@john-Precision-Tower-5810>
On Fri, Jun 22, 2018 at 08:21:34AM -0700, John Fastabend wrote:
> This fixes a crash where we assign tcp_prot to IPv6 sockets instead
> of tcpv6_prot.
>
> Previously we overwrote the sk->prot field with tcp_prot even in the
> AF_INET6 case. This patch ensures the correct tcp_prot and tcpv6_prot
> are used.
>
> Tested with 'netserver -6' and 'netperf -H [IPv6]' as well as
> 'netperf -H [IPv4]'. The ESTABLISHED check resolves the previously
> crashing case here.
>
> Fixes: 174a79ff9515 ("bpf: sockmap with sk redirect support")
> Reported-by: syzbot+5c063698bdbfac19f363@syzkaller.appspotmail.com
> Signed-off-by: John Fastabend <john.fastabend@gmail.com>
> Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
> ---
> kernel/bpf/sockmap.c | 58 +++++++++++++++++++++++++++++++++++++++++---------
> 1 file changed, 48 insertions(+), 10 deletions(-)
>
> diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c
> index 52a91d8..d7fd17a 100644
> --- a/kernel/bpf/sockmap.c
> +++ b/kernel/bpf/sockmap.c
> @@ -140,6 +140,7 @@ static int bpf_tcp_recvmsg(struct sock *sk, struct msghdr *msg, size_t len,
> static int bpf_tcp_sendmsg(struct sock *sk, struct msghdr *msg, size_t size);
> static int bpf_tcp_sendpage(struct sock *sk, struct page *page,
> int offset, size_t size, int flags);
> +static void bpf_tcp_close(struct sock *sk, long timeout);
>
> static inline struct smap_psock *smap_psock_sk(const struct sock *sk)
> {
> @@ -161,7 +162,42 @@ static bool bpf_tcp_stream_read(const struct sock *sk)
> return !empty;
> }
>
> -static struct proto tcp_bpf_proto;
> +enum {
> + SOCKMAP_IPV4,
> + SOCKMAP_IPV6,
> + SOCKMAP_NUM_PROTS,
> +};
> +
> +enum {
> + SOCKMAP_BASE,
> + SOCKMAP_TX,
> + SOCKMAP_NUM_CONFIGS,
> +};
> +
> +static struct proto *saved_tcpv6_prot __read_mostly;
> +static DEFINE_SPINLOCK(tcpv6_prot_lock);
> +static struct proto bpf_tcp_prots[SOCKMAP_NUM_PROTS][SOCKMAP_NUM_CONFIGS];
> +static void build_protos(struct proto prot[SOCKMAP_NUM_CONFIGS],
> + struct proto *base)
> +{
> + prot[SOCKMAP_BASE] = *base;
> + prot[SOCKMAP_BASE].close = bpf_tcp_close;
> + prot[SOCKMAP_BASE].recvmsg = bpf_tcp_recvmsg;
> + prot[SOCKMAP_BASE].stream_memory_read = bpf_tcp_stream_read;
> +
> + prot[SOCKMAP_TX] = prot[SOCKMAP_BASE];
> + prot[SOCKMAP_TX].sendmsg = bpf_tcp_sendmsg;
> + prot[SOCKMAP_TX].sendpage = bpf_tcp_sendpage;
> +}
> +
> +static void update_sk_prot(struct sock *sk, struct smap_psock *psock)
> +{
> + int family = sk->sk_family == AF_INET6 ? SOCKMAP_IPV6 : SOCKMAP_IPV4;
> + int conf = psock->bpf_tx_msg ? SOCKMAP_TX : SOCKMAP_BASE;
> +
> + sk->sk_prot = &bpf_tcp_prots[family][conf];
> +}
> +
> static int bpf_tcp_init(struct sock *sk)
> {
> struct smap_psock *psock;
> @@ -181,14 +217,17 @@ static int bpf_tcp_init(struct sock *sk)
> psock->save_close = sk->sk_prot->close;
> psock->sk_proto = sk->sk_prot;
>
> - if (psock->bpf_tx_msg) {
> - tcp_bpf_proto.sendmsg = bpf_tcp_sendmsg;
> - tcp_bpf_proto.sendpage = bpf_tcp_sendpage;
> - tcp_bpf_proto.recvmsg = bpf_tcp_recvmsg;
> - tcp_bpf_proto.stream_memory_read = bpf_tcp_stream_read;
> + /* Build IPv6 sockmap whenever the address of tcpv6_prot changes */
> + if (sk->sk_family == AF_INET6 &&
> + unlikely(sk->sk_prot != smp_load_acquire(&saved_tcpv6_prot))) {
> + spin_lock_bh(&tcpv6_prot_lock);
> + if (likely(sk->sk_prot != saved_tcpv6_prot)) {
> + build_protos(bpf_tcp_prots[SOCKMAP_IPV6], sk->sk_prot);
> + smp_store_release(&saved_tcpv6_prot, sk->sk_prot);
> + }
> + spin_unlock_bh(&tcpv6_prot_lock);
> }
> -
> - sk->sk_prot = &tcp_bpf_proto;
> + update_sk_prot(sk, psock);
> rcu_read_unlock();
> return 0;
> }
> @@ -1111,8 +1150,7 @@ static void bpf_tcp_msg_add(struct smap_psock *psock,
>
> static int bpf_tcp_ulp_register(void)
> {
> - tcp_bpf_proto = tcp_prot;
> - tcp_bpf_proto.close = bpf_tcp_close;
> + build_protos(bpf_tcp_prots[SOCKMAP_IPV4], &tcp_prot);
> /* Once BPF TX ULP is registered it is never unregistered. It
> * will be in the ULP list for the lifetime of the system. Doing
> * duplicate registers is not a problem.
>
^ permalink raw reply
* Re: [bpf PATCH v3 2/4] bpf: sockmap, fix smap_list_map_remove when psock is in many maps
From: Martin KaFai Lau @ 2018-06-23 7:45 UTC (permalink / raw)
To: John Fastabend; +Cc: ast, daniel, netdev
In-Reply-To: <20180622152139.24502.24474.stgit@john-Precision-Tower-5810>
On Fri, Jun 22, 2018 at 08:21:39AM -0700, John Fastabend wrote:
> If a hashmap is free'd with open socks it removes the reference to
> the hash entry from the psock. If that is the last reference to the
> psock then it will also be free'd by the reference counting logic.
> However the current logic that removes the hash reference from the
> list of references is broken. In map_list_map_remove() we first check
s/map_list_map_remove/smap_list_remove/
> if the sockmap entry matches and then check if the hashmap entry
> matches. But, the sockmap entry sill always match because its NULL in
> this case which causes the first entry to be removed from the list.
> If this is always the "right" entry (because the user adds/removes
> entries in order) then everything is OK but otherwise a subsequent
> bpf_tcp_close() may reference a free'd object.
>
> To fix this create two list handlers one for sockmap and one for
> sockhash.
>
> Reported-by: syzbot+0ce137753c78f7b6acc1@syzkaller.appspotmail.com
> Fixes: 81110384441a ("bpf: sockmap, add hash map support")
> Signed-off-by: John Fastabend <john.fastabend@gmail.com>
One nit. Other than that,
Acked-by: Martin KaFai Lau <kafai@fb.com>
> ---
> kernel/bpf/sockmap.c | 33 +++++++++++++++++++++------------
> 1 file changed, 21 insertions(+), 12 deletions(-)
>
> diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c
> index d7fd17a..69b26af 100644
> --- a/kernel/bpf/sockmap.c
> +++ b/kernel/bpf/sockmap.c
> @@ -1602,17 +1602,26 @@ static struct bpf_map *sock_map_alloc(union bpf_attr *attr)
> return ERR_PTR(err);
> }
>
> -static void smap_list_remove(struct smap_psock *psock,
> - struct sock **entry,
> - struct htab_elem *hash_link)
> +static void smap_list_map_remove(struct smap_psock *psock,
> + struct sock **entry)
> {
> struct smap_psock_map_entry *e, *tmp;
>
> list_for_each_entry_safe(e, tmp, &psock->maps, list) {
> - if (e->entry == entry || e->hash_link == hash_link) {
> + if (e->entry == entry)
> + list_del(&e->list);
> + }
> +}
Nit. Add an empty line.
> +static void smap_list_hash_remove(struct smap_psock *psock,
> + struct htab_elem *hash_link)
> +{
> + struct smap_psock_map_entry *e, *tmp;
> +
> + list_for_each_entry_safe(e, tmp, &psock->maps, list) {
> + struct htab_elem *c = e->hash_link;
> +
> + if (c == hash_link)
> list_del(&e->list);
> - break;
> - }
> }
> }
>
> @@ -1647,7 +1656,7 @@ static void sock_map_free(struct bpf_map *map)
> * to be null and queued for garbage collection.
> */
> if (likely(psock)) {
> - smap_list_remove(psock, &stab->sock_map[i], NULL);
> + smap_list_map_remove(psock, &stab->sock_map[i]);
> smap_release_sock(psock, sock);
> }
> write_unlock_bh(&sock->sk_callback_lock);
> @@ -1706,7 +1715,7 @@ static int sock_map_delete_elem(struct bpf_map *map, void *key)
>
> if (psock->bpf_parse)
> smap_stop_sock(psock, sock);
> - smap_list_remove(psock, &stab->sock_map[k], NULL);
> + smap_list_map_remove(psock, &stab->sock_map[k]);
> smap_release_sock(psock, sock);
> out:
> write_unlock_bh(&sock->sk_callback_lock);
> @@ -1908,7 +1917,7 @@ static int sock_map_ctx_update_elem(struct bpf_sock_ops_kern *skops,
> struct smap_psock *opsock = smap_psock_sk(osock);
>
> write_lock_bh(&osock->sk_callback_lock);
> - smap_list_remove(opsock, &stab->sock_map[i], NULL);
> + smap_list_map_remove(opsock, &stab->sock_map[i]);
> smap_release_sock(opsock, osock);
> write_unlock_bh(&osock->sk_callback_lock);
> }
> @@ -2124,7 +2133,7 @@ static void sock_hash_free(struct bpf_map *map)
> * (psock) to be null and queued for garbage collection.
> */
> if (likely(psock)) {
> - smap_list_remove(psock, NULL, l);
> + smap_list_hash_remove(psock, l);
> smap_release_sock(psock, sock);
> }
> write_unlock_bh(&sock->sk_callback_lock);
> @@ -2304,7 +2313,7 @@ static int sock_hash_ctx_update_elem(struct bpf_sock_ops_kern *skops,
> psock = smap_psock_sk(l_old->sk);
>
> hlist_del_rcu(&l_old->hash_node);
> - smap_list_remove(psock, NULL, l_old);
> + smap_list_hash_remove(psock, l_old);
> smap_release_sock(psock, l_old->sk);
> free_htab_elem(htab, l_old);
> }
> @@ -2372,7 +2381,7 @@ static int sock_hash_delete_elem(struct bpf_map *map, void *key)
> * to be null and queued for garbage collection.
> */
> if (likely(psock)) {
> - smap_list_remove(psock, NULL, l);
> + smap_list_hash_remove(psock, l);
> smap_release_sock(psock, sock);
> }
> write_unlock_bh(&sock->sk_callback_lock);
>
^ permalink raw reply
* Re: [bpf PATCH v3 3/4] bpf: sockhash fix omitted bucket lock in sock_close
From: Martin KaFai Lau @ 2018-06-23 7:45 UTC (permalink / raw)
To: John Fastabend; +Cc: ast, daniel, netdev
In-Reply-To: <20180622152144.24502.93661.stgit@john-Precision-Tower-5810>
On Fri, Jun 22, 2018 at 08:21:44AM -0700, John Fastabend wrote:
> First in tcp_close, reduce scope of sk_callback_lock() the lock is
> only needed for protecting maps list the ingress and cork
> lists are protected by sock lock. Having the lock in wider scope is
> harmless but may confuse the reader who may infer it is in fact
> needed.
>
> Next, in sock_hash_delete_elem() the pattern is as follows,
>
> sock_hash_delete_elem()
> [...]
> spin_lock(bucket_lock)
> l = lookup_elem_raw()
> if (l)
> hlist_del_rcu()
> write_lock(sk_callback_lock)
> .... destroy psock ...
> write_unlock(sk_callback_lock)
> spin_unlock(bucket_lock)
>
> The ordering is necessary because we only know the {p}sock after
> dereferencing the hash table which we can't do unless we have the
> bucket lock held. Once we have the bucket lock and the psock element
> it is deleted from the hashmap to ensure any other path doing a lookup
> will fail. Finally, the refcnt is decremented and if zero the psock
> is destroyed.
>
> In parallel with the above (or free'ing the map) a tcp close event
> may trigger tcp_close(). Which at the moment omits the bucket lock
> altogether (oops!) where the flow looks like this,
>
> bpf_tcp_close()
> [...]
> write_lock(sk_callback_lock)
> for each psock->maps // list of maps this sock is part of
> hlist_del_rcu(ref_hash_node);
> .... destroy psock ...
> write_unlock(sk_callback_lock)
>
> Obviously, and demonstrated by syzbot, this is broken because
> we can have multiple threads deleting entries via hlist_del_rcu().
>
> To fix this we might be tempted to wrap the hlist operation in a
> bucket lock but that would create a lock inversion problem. In
> summary to follow locking rules the psocks maps list needs the
> sk_callback_lock but we need the bucket lock to do the hlist_del_rcu.
> To resolve the lock inversion problem pop the head of the maps list
> repeatedly and remove the reference until no more are left. If a
> delete happens in parallel from the BPF API that is OK as well because
> it will do a similar action, lookup the lock in the map/hash, delete
> it from the map/hash, and dec the refcnt. We check for this case
> before doing a destroy on the psock to ensure we don't have two
> threads tearing down a psock. The new logic is as follows,
>
> bpf_tcp_close()
> e = psock_map_pop(psock->maps) // done with sk_callback_lock
> bucket_lock() // lock hash list bucket
> l = lookup_elem_raw(head, hash, key, key_size);
> if (l) {
> //only get here if elmnt was not already removed
> hlist_del_rcu()
> ... destroy psock...
> }
> bucket_unlock()
>
> And finally for all the above to work add missing sk_callback_lock
> around smap_list_remove in sock_hash_ctx_update_elem(). Otherwise
> delete and update may corrupt maps list. Then add RCU annotations and
> use rcu_dereference/rcu_assign_pointer to manage values relying on
> RCU so that the object is not free'd from sock_hash_free() while it
> is being referenced in bpf_tcp_close().
>
> (As an aside the sk_callback_lock serves two purposes. The
> first, is to update the sock callbacks sk_data_ready, sk_write_space,
> etc. The second is to protect the psock 'maps' list. The 'maps' list
> is used to (as shown above) to delete all map/hash references to a
> sock when the sock is closed)
>
> Reported-by: syzbot+0ce137753c78f7b6acc1@syzkaller.appspotmail.com
> Fixes: 81110384441a ("bpf: sockmap, add hash map support")
> Signed-off-by: John Fastabend <john.fastabend@gmail.com>
> ---
> kernel/bpf/sockmap.c | 120 +++++++++++++++++++++++++++++++++++---------------
> 1 file changed, 84 insertions(+), 36 deletions(-)
>
> diff --git a/kernel/bpf/sockmap.c b/kernel/bpf/sockmap.c
> index 69b26af..333427b 100644
> --- a/kernel/bpf/sockmap.c
> +++ b/kernel/bpf/sockmap.c
> @@ -72,6 +72,7 @@ struct bpf_htab {
> u32 n_buckets;
> u32 elem_size;
> struct bpf_sock_progs progs;
> + struct rcu_head rcu;
> };
>
> struct htab_elem {
> @@ -89,8 +90,8 @@ enum smap_psock_state {
> struct smap_psock_map_entry {
> struct list_head list;
> struct sock **entry;
> - struct htab_elem *hash_link;
> - struct bpf_htab *htab;
> + struct htab_elem __rcu *hash_link;
> + struct bpf_htab __rcu *htab;
> };
>
> struct smap_psock {
> @@ -258,16 +259,54 @@ static void bpf_tcp_release(struct sock *sk)
> rcu_read_unlock();
> }
>
> +static struct htab_elem *lookup_elem_raw(struct hlist_head *head,
> + u32 hash, void *key, u32 key_size)
> +{
> + struct htab_elem *l;
> +
> + hlist_for_each_entry_rcu(l, head, hash_node) {
> + if (l->hash == hash && !memcmp(&l->key, key, key_size))
> + return l;
> + }
> +
> + return NULL;
> +}
> +
> +static inline struct bucket *__select_bucket(struct bpf_htab *htab, u32 hash)
> +{
> + return &htab->buckets[hash & (htab->n_buckets - 1)];
> +}
> +
> +static inline struct hlist_head *select_bucket(struct bpf_htab *htab, u32 hash)
> +{
> + return &__select_bucket(htab, hash)->head;
> +}
> +
> static void free_htab_elem(struct bpf_htab *htab, struct htab_elem *l)
> {
> atomic_dec(&htab->count);
> kfree_rcu(l, rcu);
> }
>
> +static struct smap_psock_map_entry *psock_map_pop(struct sock *sk,
> + struct smap_psock *psock)
> +{
> + struct smap_psock_map_entry *e;
> +
> + write_lock_bh(&sk->sk_callback_lock);
> + e = list_first_entry_or_null(&psock->maps,
> + struct smap_psock_map_entry,
> + list);
> + if (e)
> + list_del(&e->list);
> + write_unlock_bh(&sk->sk_callback_lock);
> + return e;
> +}
> +
> static void bpf_tcp_close(struct sock *sk, long timeout)
> {
> void (*close_fun)(struct sock *sk, long timeout);
> - struct smap_psock_map_entry *e, *tmp;
> + struct smap_psock_map_entry *e;
> struct sk_msg_buff *md, *mtmp;
> struct smap_psock *psock;
> struct sock *osk;
> @@ -286,7 +325,6 @@ static void bpf_tcp_close(struct sock *sk, long timeout)
> */
> close_fun = psock->save_close;
>
> - write_lock_bh(&sk->sk_callback_lock);
> if (psock->cork) {
> free_start_sg(psock->sock, psock->cork);
> kfree(psock->cork);
> @@ -299,20 +337,38 @@ static void bpf_tcp_close(struct sock *sk, long timeout)
> kfree(md);
> }
>
> - list_for_each_entry_safe(e, tmp, &psock->maps, list) {
> + e = psock_map_pop(sk, psock);
> + while (e) {
> if (e->entry) {
> osk = cmpxchg(e->entry, sk, NULL);
> if (osk == sk) {
> - list_del(&e->list);
> smap_release_sock(psock, sk);
> }
> } else {
> - hlist_del_rcu(&e->hash_link->hash_node);
> - smap_release_sock(psock, e->hash_link->sk);
> - free_htab_elem(e->htab, e->hash_link);
> + struct htab_elem *link = rcu_dereference(e->hash_link);
> + struct bpf_htab *htab = rcu_dereference(e->htab);
> + struct hlist_head *head;
> + struct htab_elem *l;
> + struct bucket *b;
> +
> + b = __select_bucket(htab, link->hash);
> + head = &b->head;
> + raw_spin_lock_bh(&b->lock);
> + l = lookup_elem_raw(head,
> + link->hash, link->key,
> + htab->map.key_size);
> + /* If another thread deleted this object skip deletion.
> + * The refcnt on psock may or may not be zero.
> + */
> + if (l) {
> + hlist_del_rcu(&link->hash_node);
> + smap_release_sock(psock, link->sk);
> + free_htab_elem(htab, link);
> + }
> + raw_spin_unlock_bh(&b->lock);
> }
> + e = psock_map_pop(sk, psock);
> }
> - write_unlock_bh(&sk->sk_callback_lock);
> rcu_read_unlock();
> close_fun(sk, timeout);
> }
> @@ -1618,7 +1674,7 @@ static void smap_list_hash_remove(struct smap_psock *psock,
> struct smap_psock_map_entry *e, *tmp;
>
> list_for_each_entry_safe(e, tmp, &psock->maps, list) {
> - struct htab_elem *c = e->hash_link;
> + struct htab_elem *c = rcu_dereference(e->hash_link);
>
> if (c == hash_link)
> list_del(&e->list);
> @@ -2090,14 +2146,13 @@ static struct bpf_map *sock_hash_alloc(union bpf_attr *attr)
> return ERR_PTR(err);
> }
>
> -static inline struct bucket *__select_bucket(struct bpf_htab *htab, u32 hash)
> +static void __bpf_htab_free(struct rcu_head *rcu)
> {
> - return &htab->buckets[hash & (htab->n_buckets - 1)];
> -}
> + struct bpf_htab *htab;
>
> -static inline struct hlist_head *select_bucket(struct bpf_htab *htab, u32 hash)
> -{
> - return &__select_bucket(htab, hash)->head;
> + htab = container_of(rcu, struct bpf_htab, rcu);
> + bpf_map_area_free(htab->buckets);
> + kfree(htab);
> }
>
> static void sock_hash_free(struct bpf_map *map)
> @@ -2116,10 +2171,13 @@ static void sock_hash_free(struct bpf_map *map)
> */
> rcu_read_lock();
> for (i = 0; i < htab->n_buckets; i++) {
> - struct hlist_head *head = select_bucket(htab, i);
> + struct bucket *b = __select_bucket(htab, i);
> + struct hlist_head *head;
> struct hlist_node *n;
> struct htab_elem *l;
>
> + raw_spin_lock_bh(&b->lock);
> + head = &b->head;
> hlist_for_each_entry_safe(l, n, head, hash_node) {
> struct sock *sock = l->sk;
> struct smap_psock *psock;
> @@ -2137,12 +2195,12 @@ static void sock_hash_free(struct bpf_map *map)
> smap_release_sock(psock, sock);
> }
> write_unlock_bh(&sock->sk_callback_lock);
> - kfree(l);
> + free_htab_elem(htab, l);
> }
> + raw_spin_unlock_bh(&b->lock);
> }
> rcu_read_unlock();
> - bpf_map_area_free(htab->buckets);
> - kfree(htab);
> + call_rcu(&htab->rcu, __bpf_htab_free);
> }
>
> static struct htab_elem *alloc_sock_hash_elem(struct bpf_htab *htab,
> @@ -2169,19 +2227,6 @@ static struct htab_elem *alloc_sock_hash_elem(struct bpf_htab *htab,
> return l_new;
> }
>
> -static struct htab_elem *lookup_elem_raw(struct hlist_head *head,
> - u32 hash, void *key, u32 key_size)
> -{
> - struct htab_elem *l;
> -
> - hlist_for_each_entry_rcu(l, head, hash_node) {
> - if (l->hash == hash && !memcmp(&l->key, key, key_size))
> - return l;
> - }
> -
> - return NULL;
> -}
> -
> static inline u32 htab_map_hash(const void *key, u32 key_len)
> {
> return jhash(key, key_len, 0);
> @@ -2301,8 +2346,9 @@ static int sock_hash_ctx_update_elem(struct bpf_sock_ops_kern *skops,
> goto bucket_err;
> }
>
> - e->hash_link = l_new;
> - e->htab = container_of(map, struct bpf_htab, map);
> + rcu_assign_pointer(e->hash_link, l_new);
> + rcu_assign_pointer(e->htab,
> + container_of(map, struct bpf_htab, map));
> list_add_tail(&e->list, &psock->maps);
Is sock->sk_callback_lock held here?
Others LGTM.
>
> /* add new element to the head of the list, so that
> @@ -2313,8 +2359,10 @@ static int sock_hash_ctx_update_elem(struct bpf_sock_ops_kern *skops,
> psock = smap_psock_sk(l_old->sk);
>
> hlist_del_rcu(&l_old->hash_node);
> + write_lock_bh(&l_old->sk->sk_callback_lock);
> smap_list_hash_remove(psock, l_old);
> smap_release_sock(psock, l_old->sk);
> + write_unlock_bh(&l_old->sk->sk_callback_lock);
> free_htab_elem(htab, l_old);
> }
> raw_spin_unlock_bh(&b->lock);
>
^ permalink raw reply
* [PATCH net-next 0/2] r8169: enable ASPM on RTL8168E-VL
From: Heiner Kallweit @ 2018-06-23 7:49 UTC (permalink / raw)
To: Realtek linux nic maintainers, David Miller; +Cc: netdev@vger.kernel.org
This patch series enables ASPM for the RTL8168E-VL and aligns ASPM entry
latency handling with the vendor driver before.
Heiner Kallweit (2):
r8169: align ASPM entry latency setting with vendor driver
r8169: enable ASPM on RTL8168E-VL
drivers/net/ethernet/realtek/r8169.c | 45 +++++++++++++---------------
1 file changed, 21 insertions(+), 24 deletions(-)
--
2.18.0
^ permalink raw reply
* [PATCH net-next 1/2] r8169: align ASPM entry latency setting with vendor driver
From: Heiner Kallweit @ 2018-06-23 7:51 UTC (permalink / raw)
To: Realtek linux nic maintainers, David Miller; +Cc: netdev@vger.kernel.org
In-Reply-To: <50617290-b86c-f5fd-5d74-87459b0e9a4d@gmail.com>
The r8168 vendor driver always uses value 0x27. In r8169 we have few
chips where 0x17 is used. So far this didn't matter because ASPM was
disabled anyway. Now that ASPM was re-enabled let's also use 0x27 only.
One of the chips affected by this change is RTL8168E-VL, on my system
with this chip value 0x27 works fine.
In addition rename rtl_csi_access_enable_2() to
rtl_set_def_aspm_entry_latency() to make clear that we set the default
ASPM entry latency.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
drivers/net/ethernet/realtek/r8169.c | 43 ++++++++++++----------------
1 file changed, 19 insertions(+), 24 deletions(-)
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index 06e14da1..d5e380d9 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -5235,12 +5235,7 @@ static void rtl_csi_access_enable(struct rtl8169_private *tp, u8 val)
rtl_csi_write(tp, 0x070c, csi | val << 24);
}
-static void rtl_csi_access_enable_1(struct rtl8169_private *tp)
-{
- rtl_csi_access_enable(tp, 0x17);
-}
-
-static void rtl_csi_access_enable_2(struct rtl8169_private *tp)
+static void rtl_set_def_aspm_entry_latency(struct rtl8169_private *tp)
{
rtl_csi_access_enable(tp, 0x27);
}
@@ -5347,7 +5342,7 @@ static void rtl_hw_start_8168cp_1(struct rtl8169_private *tp)
{ 0x07, 0, 0x2000 }
};
- rtl_csi_access_enable_2(tp);
+ rtl_set_def_aspm_entry_latency(tp);
rtl_ephy_init(tp, e_info_8168cp, ARRAY_SIZE(e_info_8168cp));
@@ -5356,7 +5351,7 @@ static void rtl_hw_start_8168cp_1(struct rtl8169_private *tp)
static void rtl_hw_start_8168cp_2(struct rtl8169_private *tp)
{
- rtl_csi_access_enable_2(tp);
+ rtl_set_def_aspm_entry_latency(tp);
RTL_W8(tp, Config3, RTL_R8(tp, Config3) & ~Beacon_en);
@@ -5369,7 +5364,7 @@ static void rtl_hw_start_8168cp_2(struct rtl8169_private *tp)
static void rtl_hw_start_8168cp_3(struct rtl8169_private *tp)
{
- rtl_csi_access_enable_2(tp);
+ rtl_set_def_aspm_entry_latency(tp);
RTL_W8(tp, Config3, RTL_R8(tp, Config3) & ~Beacon_en);
@@ -5393,7 +5388,7 @@ static void rtl_hw_start_8168c_1(struct rtl8169_private *tp)
{ 0x06, 0x0080, 0x0000 }
};
- rtl_csi_access_enable_2(tp);
+ rtl_set_def_aspm_entry_latency(tp);
RTL_W8(tp, DBG_REG, 0x06 | FIX_NAK_1 | FIX_NAK_2);
@@ -5409,7 +5404,7 @@ static void rtl_hw_start_8168c_2(struct rtl8169_private *tp)
{ 0x03, 0x0400, 0x0220 }
};
- rtl_csi_access_enable_2(tp);
+ rtl_set_def_aspm_entry_latency(tp);
rtl_ephy_init(tp, e_info_8168c_2, ARRAY_SIZE(e_info_8168c_2));
@@ -5423,14 +5418,14 @@ static void rtl_hw_start_8168c_3(struct rtl8169_private *tp)
static void rtl_hw_start_8168c_4(struct rtl8169_private *tp)
{
- rtl_csi_access_enable_2(tp);
+ rtl_set_def_aspm_entry_latency(tp);
__rtl_hw_start_8168cp(tp);
}
static void rtl_hw_start_8168d(struct rtl8169_private *tp)
{
- rtl_csi_access_enable_2(tp);
+ rtl_set_def_aspm_entry_latency(tp);
rtl_disable_clock_request(tp);
@@ -5445,7 +5440,7 @@ static void rtl_hw_start_8168d(struct rtl8169_private *tp)
static void rtl_hw_start_8168dp(struct rtl8169_private *tp)
{
- rtl_csi_access_enable_1(tp);
+ rtl_set_def_aspm_entry_latency(tp);
if (tp->dev->mtu <= ETH_DATA_LEN)
rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B);
@@ -5463,7 +5458,7 @@ static void rtl_hw_start_8168d_4(struct rtl8169_private *tp)
{ 0x0c, 0x0100, 0x0020 }
};
- rtl_csi_access_enable_1(tp);
+ rtl_set_def_aspm_entry_latency(tp);
rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B);
@@ -5492,7 +5487,7 @@ static void rtl_hw_start_8168e_1(struct rtl8169_private *tp)
{ 0x0a, 0x0000, 0x0040 }
};
- rtl_csi_access_enable_2(tp);
+ rtl_set_def_aspm_entry_latency(tp);
rtl_ephy_init(tp, e_info_8168e_1, ARRAY_SIZE(e_info_8168e_1));
@@ -5517,7 +5512,7 @@ static void rtl_hw_start_8168e_2(struct rtl8169_private *tp)
{ 0x19, 0x0000, 0x0224 }
};
- rtl_csi_access_enable_1(tp);
+ rtl_set_def_aspm_entry_latency(tp);
rtl_ephy_init(tp, e_info_8168e_2, ARRAY_SIZE(e_info_8168e_2));
@@ -5550,7 +5545,7 @@ static void rtl_hw_start_8168e_2(struct rtl8169_private *tp)
static void rtl_hw_start_8168f(struct rtl8169_private *tp)
{
- rtl_csi_access_enable_2(tp);
+ rtl_set_def_aspm_entry_latency(tp);
rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B);
@@ -5621,7 +5616,7 @@ static void rtl_hw_start_8168g(struct rtl8169_private *tp)
rtl_eri_write(tp, 0xd0, ERIAR_MASK_0001, 0x48, ERIAR_EXGMAC);
rtl_eri_write(tp, 0xe8, ERIAR_MASK_1111, 0x00100006, ERIAR_EXGMAC);
- rtl_csi_access_enable_1(tp);
+ rtl_set_def_aspm_entry_latency(tp);
rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B);
@@ -5720,7 +5715,7 @@ static void rtl_hw_start_8168h_1(struct rtl8169_private *tp)
rtl_eri_write(tp, 0xd0, ERIAR_MASK_0001, 0x48, ERIAR_EXGMAC);
rtl_eri_write(tp, 0xe8, ERIAR_MASK_1111, 0x00100006, ERIAR_EXGMAC);
- rtl_csi_access_enable_1(tp);
+ rtl_set_def_aspm_entry_latency(tp);
rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B);
@@ -5804,7 +5799,7 @@ static void rtl_hw_start_8168ep(struct rtl8169_private *tp)
rtl_eri_write(tp, 0xd0, ERIAR_MASK_0001, 0x5f, ERIAR_EXGMAC);
rtl_eri_write(tp, 0xe8, ERIAR_MASK_1111, 0x00100006, ERIAR_EXGMAC);
- rtl_csi_access_enable_1(tp);
+ rtl_set_def_aspm_entry_latency(tp);
rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B);
@@ -6040,7 +6035,7 @@ static void rtl_hw_start_8102e_1(struct rtl8169_private *tp)
};
u8 cfg1;
- rtl_csi_access_enable_2(tp);
+ rtl_set_def_aspm_entry_latency(tp);
RTL_W8(tp, DBG_REG, FIX_NAK_1);
@@ -6059,7 +6054,7 @@ static void rtl_hw_start_8102e_1(struct rtl8169_private *tp)
static void rtl_hw_start_8102e_2(struct rtl8169_private *tp)
{
- rtl_csi_access_enable_2(tp);
+ rtl_set_def_aspm_entry_latency(tp);
rtl_tx_performance_tweak(tp, PCI_EXP_DEVCTL_READRQ_4096B);
@@ -6114,7 +6109,7 @@ static void rtl_hw_start_8402(struct rtl8169_private *tp)
{ 0x1e, 0, 0x4000 }
};
- rtl_csi_access_enable_2(tp);
+ rtl_set_def_aspm_entry_latency(tp);
/* Force LAN exit from ASPM if Rx/Tx are not idle */
RTL_W32(tp, FuncEvent, RTL_R32(tp, FuncEvent) | 0x002800);
--
2.18.0
^ permalink raw reply related
* [PATCH net-next 2/2] r8169: enable ASPM on RTL8168E-VL
From: Heiner Kallweit @ 2018-06-23 7:53 UTC (permalink / raw)
To: Realtek linux nic maintainers, David Miller; +Cc: netdev@vger.kernel.org
In-Reply-To: <50617290-b86c-f5fd-5d74-87459b0e9a4d@gmail.com>
Let's enable ASPM also on the RTL8168E-VL (chip version 34).
Works fine on my Zotac Mini PC with this chip. Temperature when
being idle is significantly lower than before due to reaching
deeper PC states.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
drivers/net/ethernet/realtek/r8169.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c
index d5e380d9..44715958 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -5541,6 +5541,8 @@ static void rtl_hw_start_8168e_2(struct rtl8169_private *tp)
RTL_W8(tp, DLLPR, RTL_R8(tp, DLLPR) | PFM_EN);
RTL_W32(tp, MISC, RTL_R32(tp, MISC) | PWM_EN);
RTL_W8(tp, Config5, RTL_R8(tp, Config5) & ~Spi_en);
+
+ rtl_hw_aspm_clkreq_enable(tp, true);
}
static void rtl_hw_start_8168f(struct rtl8169_private *tp)
--
2.18.0
^ permalink raw reply related
* panic with 9facc33687 "bpf: reject any prog that failed read-only lock"
From: Sebastian Ott @ 2018-06-23 9:23 UTC (permalink / raw)
To: Daniel Borkmann
Cc: Alexei Starovoitov, Martin KaFai Lau, linux-kernel, netdev
[-- Attachment #1: Type: text/plain, Size: 1508 bytes --]
With commit 9facc33687 ("bpf: reject any prog that failed read-only lock")
s390 panics:
¢ 9.090218! specification exception: 0006 ilc:1 ¢#1! PREEMPT SMP
¢ 9.090257! Modules linked in:
¢ 9.090277! CPU: 2 PID: 162 Comm: (journald) Not tainted 4.18.0-rc1-00189-g894b8c000ae6 #256
¢ 9.090285! Hardware name: IBM 3906 M04 704 (LPAR)
¢ 9.090296! Krnl PSW : (____ptrval____) (____ptrval____) (0x3ff80002da1)
¢ 9.090320! R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
¢ 9.090336! Krnl GPRS: 0000000000000000 000003e0887f3000 00000000c15dbda8 000003e0887f3038
¢ 9.090346! 000003ff80002d9f 0000000000000001 000003ff92f28f50 000002aa1b416350
¢ 9.090355! 0000000000000570 00000000c15dbe28 00000000c15dbda8 000000007fff0000
¢ 9.090364! 00000000c11ac178 0000000000002738 000000000024c8d2 00000000c15dbd08
¢ 9.090376! Krnl Code: Bad PSW.
¢ 9.090387! Call Trace:
¢ 9.090401! (¢<000000000024c8b8>! seccomp_run_filters+0x50/0xc0)
¢ 9.090412! ¢<000000000024cb38>! __seccomp_filter+0x40/0x478
¢ 9.090426! ¢<0000000000108362>! do_syscall_trace_enter+0xe2/0x310
¢ 9.090439! ¢<0000000000baec9c>! system_call+0x284/0x2d0
¢ 9.090453! INFO: lockdep is turned off.
¢ 9.090464! Last Breaking-Event-Address:
¢ 9.090475! ¢<000000000024c8d0>! seccomp_run_filters+0x68/0xc0
¢ 9.090491!
¢ 9.090503! Kernel panic - not syncing: Fatal exception: panic_on_oops
config and bisect log attached.
Regards,
Sebastian
[-- Attachment #2: Type: text/plain, Size: 1542 bytes --]
# bad: [894b8c000ae6c106cc434ee0000dfb77df8bd9db] Merge tag 'for_v4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
# good: [81e97f01371f4e1701feeafe484665112cd9ddc2] Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
git bisect start 'HEAD' 'foo'
# bad: [26c92a38cec99ee7b657901ff64bd01a96a2fb22] Merge tag 'pm-4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
git bisect bad 26c92a38cec99ee7b657901ff64bd01a96a2fb22
# bad: [0a889b9404c084c6fd145020c939a8f688b3e058] net/sched: act_ife: fix recursive lock and idr leak
git bisect bad 0a889b9404c084c6fd145020c939a8f688b3e058
# bad: [3935a70968820c3994db4de7e6e1c7e814bff875] qed: Add sanity check for SIMD fastpath handler.
git bisect bad 3935a70968820c3994db4de7e6e1c7e814bff875
# good: [7d1982b4e335c1b184406b7566f6041bfe313c35] bpf: fix panic in prog load calls cleanup
git bisect good 7d1982b4e335c1b184406b7566f6041bfe313c35
# bad: [0841d98641bdb9c7f873adf7f6865ab0880ddfc7] Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
git bisect bad 0841d98641bdb9c7f873adf7f6865ab0880ddfc7
# bad: [b5518c705178cb96fd2b775e0c070e72b5d0d688] Merge branch 'bpf-fixes'
git bisect bad b5518c705178cb96fd2b775e0c070e72b5d0d688
# bad: [9facc336876f7ecf9edba4c67b90426fde4ec898] bpf: reject any prog that failed read-only lock
git bisect bad 9facc336876f7ecf9edba4c67b90426fde4ec898
# first bad commit: [9facc336876f7ecf9edba4c67b90426fde4ec898] bpf: reject any prog that failed read-only lock
[-- Attachment #3: Type: text/plain, Size: 71721 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/s390 4.18.0-rc1 Kernel Configuration
#
#
# Compiler: gcc (GCC) 7.2.0
#
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_LOCKBREAK=y
CONFIG_PGSTE=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_AUDIT_ARCH=y
CONFIG_NO_IOPORT_MAP=y
# CONFIG_PCI_QUIRKS is not set
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_S390=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=70200
CONFIG_CLANG_VERSION=0
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y
#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
#
# IRQ subsystem
#
CONFIG_IRQ_DOMAIN=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_CPU_ISOLATION=y
#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING=y
CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_BPF is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_HAVE_FUTEX_CMPXCHG=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_BPF_SYSCALL=y
# CONFIG_BPF_JIT_ALWAYS_ON is not set
CONFIG_USERFAULTFD=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
CONFIG_STATIC_KEYS_SELFTEST=y
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_PLUGIN_HOSTCC="g++"
CONFIG_HAVE_GCC_PLUGINS=y
# CONFIG_GCC_PLUGINS is not set
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_ARCH_HAS_SCALED_CPUTIME=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_CLONE_BACKWARDS2=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
# CONFIG_REFCOUNT_FULL is not set
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_SQ=y
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_IBM_PARTITION=y
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_MQ_RDMA=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_LOCK=y
CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_INLINE_READ_TRYLOCK=y
CONFIG_ARCH_INLINE_READ_LOCK=y
CONFIG_ARCH_INLINE_READ_LOCK_BH=y
CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_READ_UNLOCK=y
CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_INLINE_WRITE_TRYLOCK=y
CONFIG_ARCH_INLINE_WRITE_LOCK=y
CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
CONFIG_HAVE_LIVEPATCH=y
CONFIG_LIVEPATCH=y
#
# Processor type and features
#
CONFIG_HAVE_MARCH_Z900_FEATURES=y
CONFIG_HAVE_MARCH_Z990_FEATURES=y
CONFIG_HAVE_MARCH_Z9_109_FEATURES=y
CONFIG_HAVE_MARCH_Z10_FEATURES=y
CONFIG_HAVE_MARCH_Z196_FEATURES=y
# CONFIG_MARCH_Z900 is not set
# CONFIG_MARCH_Z990 is not set
# CONFIG_MARCH_Z9_109 is not set
# CONFIG_MARCH_Z10 is not set
CONFIG_MARCH_Z196=y
# CONFIG_MARCH_ZEC12 is not set
# CONFIG_MARCH_Z13 is not set
# CONFIG_MARCH_Z14 is not set
CONFIG_MARCH_ZEC12_TUNE=y
# CONFIG_TUNE_DEFAULT is not set
# CONFIG_TUNE_Z900 is not set
# CONFIG_TUNE_Z990 is not set
# CONFIG_TUNE_Z9_109 is not set
# CONFIG_TUNE_Z10 is not set
# CONFIG_TUNE_Z196 is not set
CONFIG_TUNE_ZEC12=y
# CONFIG_TUNE_Z13 is not set
# CONFIG_TUNE_Z14 is not set
CONFIG_64BIT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=512
CONFIG_HOTPLUG_CPU=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=4
#
# Select NUMA modes
#
CONFIG_NUMA_EMU=y
CONFIG_EMU_SIZE=0x10000000
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_BOOK=y
CONFIG_SCHED_DRAWER=y
CONFIG_SCHED_TOPOLOGY=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
CONFIG_ARCH_RANDOM=y
# CONFIG_KERNEL_NOBP is not set
# CONFIG_EXPOLINE is not set
#
# Memory setup
#
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_HAVE_MEMBLOCK_PHYS_MAP=y
CONFIG_NO_BOOTMEM=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
CONFIG_CLEANCACHE=y
CONFIG_FRONTSWAP=y
CONFIG_CMA=y
CONFIG_CMA_DEBUG=y
CONFIG_CMA_DEBUGFS=y
CONFIG_CMA_AREAS=7
CONFIG_MEM_SOFT_DIRTY=y
CONFIG_ZSWAP=y
CONFIG_ZPOOL=y
CONFIG_ZBUD=m
# CONFIG_Z3FOLD is not set
CONFIG_ZSMALLOC=m
# CONFIG_PGTABLE_MAPPING is not set
CONFIG_ZSMALLOC_STAT=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_IDLE_PAGE_TRACKING=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_MAX_PHYSMEM_BITS=46
CONFIG_PACK_STACK=y
CONFIG_CHECK_STACK=y
CONFIG_STACK_GUARD=256
# CONFIG_WARN_DYNAMIC_STACK is not set
#
# I/O subsystem
#
CONFIG_QDIO=y
CONFIG_PCI=y
CONFIG_PCI_NR_FUNCTIONS=128
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_S390=y
#
# PCI controller drivers
#
#
# Cadence PCIe controllers support
#
#
# DesignWare PCI Core Support
#
#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
CONFIG_PCI_DOMAINS=y
CONFIG_HAS_IOMEM=y
CONFIG_CHSC_SCH=y
CONFIG_SCM_BUS=y
CONFIG_EADM_SCH=m
#
# Dump support
#
CONFIG_CRASH_DUMP=y
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_SECCOMP=y
#
# Power Management
#
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_ARCH_SAVE_PAGE_KEYS=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=m
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_IUCV=y
CONFIG_AFIUCV=m
CONFIG_SMC=m
CONFIG_SMC_DIAG=m
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
# CONFIG_TCP_CONG_NV is not set
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_COOKIE_HMAC_SHA1 is not set
CONFIG_INET_SCTP_DIAG=m
CONFIG_RDS=m
CONFIG_RDS_RDMA=m
CONFIG_RDS_TCP=m
CONFIG_RDS_DEBUG=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_BRIDGE_VLAN_FILTERING is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
# CONFIG_VLAN_8021Q_MVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_DEFAULT is not set
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_CLS_BPF=m
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
# CONFIG_NET_EMATCH is not set
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
# CONFIG_NET_ACT_SAMPLE is not set
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
# CONFIG_VSOCKETS is not set
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
# CONFIG_MPLS_ROUTING is not set
CONFIG_NET_NSH=m
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_BPF_JIT=y
# CONFIG_BPF_STREAM_PARSER is not set
CONFIG_NET_FLOW_LIMIT=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_CAN is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_FIB_RULES=y
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_NET_DEVLINK is not set
CONFIG_MAY_USE_DEVLINK=y
CONFIG_PAGE_POOL=y
CONFIG_FAILOVER=m
CONFIG_HAVE_EBPF_JIT=y
CONFIG_CCW=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_SYS_HYPERVISOR=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
CONFIG_DMA_CMA=y
#
# Default contiguous memory area size:
#
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CMA_SIZE_SEL_MBYTES=y
# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
# CONFIG_CMA_SIZE_SEL_MIN is not set
# CONFIG_CMA_SIZE_SEL_MAX is not set
CONFIG_CMA_ALIGNMENT=8
#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_OF is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
# CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION is not set
CONFIG_CDROM=m
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_ZRAM=m
# CONFIG_ZRAM_WRITEBACK is not set
# CONFIG_ZRAM_MEMORY_TRACKING is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# S/390 block device drivers
#
CONFIG_BLK_DEV_XPRAM=m
CONFIG_DCSSBLK=m
CONFIG_DASD=y
CONFIG_DASD_PROFILE=y
CONFIG_DASD_ECKD=y
CONFIG_DASD_FBA=y
CONFIG_DASD_DIAG=y
CONFIG_DASD_EER=y
CONFIG_SCM_BLOCK=m
CONFIG_VIRTIO_BLK=y
# CONFIG_VIRTIO_BLK_SCSI is not set
CONFIG_BLK_DEV_RBD=m
# CONFIG_BLK_DEV_RSXX is not set
#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_RDMA is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TARGET is not set
#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_CB710_CORE is not set
#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_ALTERA_STAPL is not set
#
# Intel MIC & related support
#
#
# Intel MIC Bus Driver
#
#
# SCIF Bus Driver
#
#
# VOP Bus Driver
#
#
# Intel MIC Host Driver
#
#
# Intel MIC Card Driver
#
#
# SCIF Driver
#
#
# Intel MIC Coprocessor State Management (COSM) Drivers
#
#
# VOP Driver
#
CONFIG_GENWQE=m
CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0
# CONFIG_ECHO is not set
# CONFIG_MISC_RTSX_PCI is not set
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
CONFIG_SCSI_VIRTIO=m
# CONFIG_SCSI_CHELSIO_FCOE is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
# CONFIG_MD_CLUSTER is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_MQ_DEFAULT is not set
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
# CONFIG_NET_FC is not set
CONFIG_IFB=m
# CONFIG_NET_TEAM is not set
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_VXLAN=m
# CONFIG_GENEVE is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
CONFIG_TUN=m
CONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALACRITECH=y
# CONFIG_SLICOSS is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
CONFIG_NET_VENDOR_AQUANTIA=y
# CONFIG_NET_VENDOR_ARC is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
# CONFIG_BNXT is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_CADENCE=y
# CONFIG_MACB is not set
CONFIG_NET_VENDOR_CAVIUM=y
# CONFIG_THUNDER_NIC_PF is not set
# CONFIG_THUNDER_NIC_VF is not set
# CONFIG_THUNDER_NIC_BGX is not set
# CONFIG_THUNDER_NIC_RGX is not set
CONFIG_CAVIUM_PTP=y
# CONFIG_LIQUIDIO is not set
# CONFIG_LIQUIDIO_VF is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
CONFIG_NET_VENDOR_CORTINA=y
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_HUAWEI=y
# CONFIG_NET_VENDOR_INTEL is not set
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_NET_VENDOR_MELLANOX=y
CONFIG_MLX4_EN=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_MLX4_CORE_GEN2=y
CONFIG_MLX5_CORE=m
# CONFIG_MLX5_FPGA is not set
CONFIG_MLX5_CORE_EN=y
CONFIG_MLX5_MPFS=y
# CONFIG_MLX5_CORE_IPOIB is not set
# CONFIG_MLXSW_CORE is not set
# CONFIG_MLXFW is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NETRONOME=y
# CONFIG_NFP is not set
CONFIG_NET_VENDOR_NI=y
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_QED is not set
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_QCOM_EMAC is not set
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SOLARFLARE=y
# CONFIG_SFC is not set
# CONFIG_SFC_FALCON is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_SYNOPSYS=y
# CONFIG_DWC_XLGMAC is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TI_CPSW_ALE is not set
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_MDIO_DEVICE is not set
# CONFIG_PHYLIB is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_MPPE=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
#
# S/390 network device drivers
#
CONFIG_LCS=m
CONFIG_CTCM=m
CONFIG_NETIUCV=m
CONFIG_SMSGIUCV=m
CONFIG_SMSGIUCV_EVENT=m
CONFIG_QETH=y
CONFIG_QETH_L2=y
CONFIG_QETH_L3=y
CONFIG_CCWGROUP=y
#
# Host-side USB support is needed for USB Network Adapter support
#
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=m
# CONFIG_NVM is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=0
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set
#
# Serial drivers
#
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IUCV=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_HW_RANDOM_S390=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=y
# CONFIG_TCG_TIS_I2C_ATMEL is not set
# CONFIG_TCG_TIS_I2C_INFINEON is not set
# CONFIG_TCG_TIS_I2C_NUVOTON is not set
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
CONFIG_DEVPORT=y
#
# S/390 character device drivers
#
CONFIG_TN3270=y
CONFIG_TN3270_TTY=y
CONFIG_TN3270_FS=y
CONFIG_TN3270_CONSOLE=y
CONFIG_TN3215=y
CONFIG_TN3215_CONSOLE=y
CONFIG_CCW_CONSOLE=y
CONFIG_SCLP_TTY=y
CONFIG_SCLP_CONSOLE=y
CONFIG_SCLP_VT220_TTY=y
CONFIG_SCLP_VT220_CONSOLE=y
CONFIG_SCLP_ASYNC=m
CONFIG_SCLP_ASYNC_ID="000000000"
CONFIG_HMC_DRV=m
# CONFIG_SCLP_OFB is not set
CONFIG_S390_TAPE=m
#
# S/390 tape hardware support
#
CONFIG_S390_TAPE_34XX=m
CONFIG_S390_TAPE_3590=m
CONFIG_VMLOGRDR=m
CONFIG_VMCP=y
CONFIG_VMCP_CMA_SIZE=4
CONFIG_MONREADER=m
CONFIG_MONWRITER=m
CONFIG_S390_VMUR=m
# CONFIG_XILLYBUS is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set
#
# PPS generators support
#
#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
# CONFIG_WATCHDOG_SYSFS is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_I6300ESB_WDT is not set
CONFIG_DIAG288_WATCHDOG=m
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_DRM=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DEBUG_MM is not set
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=y
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_AMDGPU is not set
#
# ACP (Audio CoProcessor) Configuration
#
#
# AMD Library routines
#
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
CONFIG_DRM_VIRTIO_GPU=y
CONFIG_DRM_PANEL=y
#
# Display Panels
#
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y
#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_TINYDRM is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
#
# Frame buffer Devices
#
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=y
CONFIG_FB_SYS_COPYAREA=y
CONFIG_FB_SYS_IMAGEBLIT=y
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_SIMPLE is not set
# CONFIG_FB_SM712 is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_HDMI=y
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
#
# HID support
#
# CONFIG_HID is not set
#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
CONFIG_INFINIBAND_USER_ACCESS=m
# CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI is not set
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ON_DEMAND_PAGING=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y
# CONFIG_INFINIBAND_MTHCA is not set
CONFIG_MLX4_INFINIBAND=m
CONFIG_MLX5_INFINIBAND=m
# CONFIG_INFINIBAND_NES is not set
# CONFIG_INFINIBAND_OCRDMA is not set
# CONFIG_INFINIBAND_IPOIB is not set
# CONFIG_INFINIBAND_SRP is not set
# CONFIG_INFINIBAND_ISER is not set
# CONFIG_INFINIBAND_RDMAVT is not set
# CONFIG_RDMA_RXE is not set
# CONFIG_DMADEVICES is not set
#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_MDEV is not set
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=m
CONFIG_VIRTIO_INPUT=y
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set
# CONFIG_HWSPINLOCK is not set
#
# Clock Source drivers
#
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
#
# Generic IOMMU Pagetable Support
#
CONFIG_S390_IOMMU=y
# CONFIG_S390_CCW_IOMMU is not set
#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# CONFIG_SOUNDWIRE is not set
#
# SOC (System On Chip) specific Drivers
#
#
# Amlogic SoC drivers
#
#
# Broadcom SoC drivers
#
#
# i.MX SoC drivers
#
#
# Qualcomm SoC drivers
#
# CONFIG_SOC_TI is not set
#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
#
# IRQ chip support
#
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set
#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
#
# Performance monitor support
#
# CONFIG_RAS is not set
#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_LIBNVDIMM is not set
CONFIG_DAX_DRIVER=y
CONFIG_DAX=y
# CONFIG_DEV_DAX is not set
# CONFIG_NVMEM is not set
#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# CONFIG_FPGA is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
CONFIG_HAVE_PNETID=y
#
# File systems
#
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_ENCRYPTION=y
CONFIG_EXT4_FS_ENCRYPTION=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
CONFIG_JBD2_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_ONLINE_SCRUB is not set
CONFIG_XFS_DEBUG=y
CONFIG_XFS_ASSERT_FATAL=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
CONFIG_BTRFS_DEBUG=y
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
CONFIG_NILFS2_FS=m
# CONFIG_F2FS_FS is not set
CONFIG_FS_DAX=y
CONFIG_FS_DAX_LIMITED=y
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
CONFIG_FS_ENCRYPTION=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_DEBUG=y
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
CONFIG_AUTOFS_FS=m
CONFIG_FUSE_FS=y
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
#
# Caches
#
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=m
# CONFIG_ECRYPT_FS_MESSAGING is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EXOFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=m
CONFIG_NFS_SWAP=y
# CONFIG_NFS_V4_1 is not set
# CONFIG_NFS_FSCACHE is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
# CONFIG_NFSD_BLOCKLAYOUT is not set
# CONFIG_NFSD_SCSILAYOUT is not set
# CONFIG_NFSD_FLEXFILELAYOUT is not set
CONFIG_NFSD_V4_SECURITY_LABEL=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_SWAP=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DEBUG is not set
CONFIG_SUNRPC_XPRT_RDMA=m
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_ACL is not set
# CONFIG_CIFS_DEBUG is not set
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_CIFS_SMB311 is not set
# CONFIG_CIFS_SMB_DIRECT is not set
# CONFIG_CIFS_FSCACHE is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_DYNAMIC_DEBUG=y
#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_DEBUG_INFO_DWARF4=y
CONFIG_GDB_SCRIPTS=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_READABLE_ASM=y
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y
#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_DEBUG_ON=y
CONFIG_SLUB_STATS=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_VMACACHE=y
CONFIG_DEBUG_VM_RB=y
CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_DEBUG_SHIRQ=y
#
# Debug Lockups and Hangs
#
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_WQ_WATCHDOG=y
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
CONFIG_DEBUG_TIMEKEEPING=y
CONFIG_DEBUG_PREEMPT=y
#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_KOBJECT_RELEASE is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PI_LIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
CONFIG_TORTURE_TEST=m
# CONFIG_RCU_PERF_TEST is not set
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=300
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
CONFIG_NOTIFIER_ERROR_INJECTION=m
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=m
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAIL_FUTEX=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_LATENCYTOP=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_PREEMPTIRQ_EVENTS is not set
CONFIG_IRQSOFF_TRACER=y
CONFIG_PREEMPT_TRACER=y
CONFIG_SCHED_TRACER=y
# CONFIG_HWLAT_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
CONFIG_UPROBE_EVENTS=y
CONFIG_BPF_EVENTS=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_TRACING_MAP=y
CONFIG_HIST_TRIGGERS=y
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
CONFIG_DMA_API_DEBUG=y
CONFIG_DMA_API_DEBUG_SG=y
CONFIG_RUNTIME_TESTING_MENU=y
CONFIG_LKDTM=m
CONFIG_TEST_LIST_SORT=y
CONFIG_TEST_SORT=y
CONFIG_KPROBES_SANITY_TEST=y
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_RBTREE_TEST=y
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
# CONFIG_ASYNC_RAID6_TEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_OVERFLOW is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_HASH is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
CONFIG_TEST_BPF=m
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_MEMTEST is not set
CONFIG_BUG_ON_DATA_CORRUPTION=y
# CONFIG_SAMPLES is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
CONFIG_ARCH_WANTS_UBSAN_NO_NULL=y
# CONFIG_UBSAN is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_S390_PTDUMP=y
CONFIG_EARLY_PRINTK=y
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_COMPAT=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_BIG_KEYS=y
# CONFIG_TRUSTED_KEYS is not set
CONFIG_ENCRYPTED_KEYS=m
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_WRITABLE_HOOKS=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_INFINIBAND is not set
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=0
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y
CONFIG_INTEGRITY_TRUSTED_KEYRING=y
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_TEMPLATE is not set
CONFIG_IMA_NG_TEMPLATE=y
# CONFIG_IMA_SIG_TEMPLATE is not set
CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng"
# CONFIG_IMA_DEFAULT_HASH_SHA1 is not set
CONFIG_IMA_DEFAULT_HASH_SHA256=y
CONFIG_IMA_DEFAULT_HASH="sha256"
CONFIG_IMA_WRITE_POLICY=y
CONFIG_IMA_READ_POLICY=y
CONFIG_IMA_APPRAISE=y
CONFIG_IMA_APPRAISE_BOOTPARAM=y
CONFIG_IMA_TRUSTED_KEYRING=y
# CONFIG_IMA_BLACKLIST_KEYRING is not set
# CONFIG_IMA_LOAD_X509 is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=m
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=m
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_ENGINE=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=y
CONFIG_CRYPTO_CHACHA20POLY1305=m
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128L is not set
# CONFIG_CRYPTO_AEGIS256 is not set
# CONFIG_CRYPTO_MORUS640 is not set
# CONFIG_CRYPTO_MORUS1280 is not set
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_ECHAINIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_CTS=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_KEYWRAP=m
#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_POLY1305=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_SHA3=m
# CONFIG_CRYPTO_SM3 is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SM4 is not set
# CONFIG_CRYPTO_SPECK is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
# CONFIG_CRYPTO_ZSTD is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_USER_API_AEAD=m
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_ZCRYPT=m
CONFIG_PKEY=m
CONFIG_CRYPTO_PAES_S390=m
CONFIG_CRYPTO_SHA1_S390=m
CONFIG_CRYPTO_SHA256_S390=m
CONFIG_CRYPTO_SHA512_S390=m
CONFIG_CRYPTO_DES_S390=m
CONFIG_CRYPTO_AES_S390=m
CONFIG_S390_PRNG=m
CONFIG_CRYPTO_GHASH_S390=m
CONFIG_CRYPTO_CRC32_S390=y
# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_CRC8=m
CONFIG_XXHASH=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=m
CONFIG_LZ4HC_COMPRESS=m
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_INTERVAL_TREE=y
CONFIG_RADIX_TREE_MULTIORDER=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DIRECT_OPS=y
CONFIG_SGL_ALLOC=y
CONFIG_IOMMU_HELPER=y
# CONFIG_CPUMASK_OFFSTACK is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_OID_REGISTRY=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set
#
# Virtualization
#
CONFIG_PFAULT=y
CONFIG_CMM=m
CONFIG_CMM_IUCV=y
CONFIG_APPLDATA_BASE=y
CONFIG_APPLDATA_MEM=m
CONFIG_APPLDATA_OS=m
CONFIG_APPLDATA_NET_SUM=m
CONFIG_S390_HYPFS_FS=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_KVM_ASYNC_PF_SYNC=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_HAVE_KVM_INVALID_WAKEUPS=y
CONFIG_HAVE_KVM_VCPU_ASYNC_IOCTL=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_S390_UCONTROL=y
CONFIG_VHOST_NET=m
CONFIG_VHOST=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
CONFIG_S390_GUEST=y
^ permalink raw reply
* Re: arm64 regression bisected to "bpf: reject any prog that failed read-only lock"
From: Daniel Borkmann @ 2018-06-23 9:24 UTC (permalink / raw)
To: dann frazier
Cc: Martin KaFai Lau, Alexei Starovoitov, linux-arm-kernel,
linux-kernel, netdev
In-Reply-To: <20180622230943.GA27737@xps13.dannf>
On 06/23/2018 01:09 AM, dann frazier wrote:
> fyi, I'm seeing a regression that I've bisected down to:
> 9facc336876f bpf: reject any prog that failed read-only lock
>
> A snippet of the boot messages are below. I'll be out of pocket until
> Monday, so apologies in advance for delays in responding to follow-ups.
Sorry about that, fixed by:
https://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git/commit/?id=9262478220eac908ae6e168c3df2c453c87e2da3
^ permalink raw reply
* Re: panic with 9facc33687 "bpf: reject any prog that failed read-only lock"
From: Daniel Borkmann @ 2018-06-23 9:29 UTC (permalink / raw)
To: Sebastian Ott; +Cc: Alexei Starovoitov, Martin KaFai Lau, linux-kernel, netdev
In-Reply-To: <alpine.LFD.2.21.1806231116400.1746@schleppi>
On 06/23/2018 11:23 AM, Sebastian Ott wrote:
> With commit 9facc33687 ("bpf: reject any prog that failed read-only lock")
> s390 panics:
Sorry about that, this is fixed by:
https://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git/commit/?id=9262478220eac908ae6e168c3df2c453c87e2da3
^ permalink raw reply
* bpf-next is OPEN
From: Daniel Borkmann @ 2018-06-23 9:37 UTC (permalink / raw)
To: netdev; +Cc: ast
Merge window is over so new bpf-next development round begins. Due to travel
this whole week till this Sun mostly offline, but feel free to push your
patches out already so they land in patchwork meanwhile.
^ permalink raw reply
* Re: panic with 9facc33687 "bpf: reject any prog that failed read-only lock"
From: Sebastian Ott @ 2018-06-23 9:45 UTC (permalink / raw)
To: Daniel Borkmann
Cc: Alexei Starovoitov, Martin KaFai Lau, linux-kernel, netdev
In-Reply-To: <a85dd2e0-0063-f94f-8afa-1c3e3e9309de@iogearbox.net>
On Sat, 23 Jun 2018, Daniel Borkmann wrote:
> On 06/23/2018 11:23 AM, Sebastian Ott wrote:
> > With commit 9facc33687 ("bpf: reject any prog that failed read-only lock")
> > s390 panics:
>
> Sorry about that, this is fixed by:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git/commit/?id=9262478220eac908ae6e168c3df2c453c87e2da3
That one helped. Thanks!
Sebastian
^ permalink raw reply
* Re: [PATCH 00/14] net: pch_gbe: Cleanups
From: David Miller @ 2018-06-23 11:52 UTC (permalink / raw)
To: paul.burton; +Cc: netdev, andrew
In-Reply-To: <20180623031753.31893-1-paul.burton@mips.com>
From: Paul Burton <paul.burton@mips.com>
Date: Fri, 22 Jun 2018 20:17:39 -0700
> This series begins the process of cleaning up the pch_gbe network
> driver. Whilst my ultimate goal is to add support for using this driver
> on the MIPS Boston development board, this series sets that aside in
> favor of making some more general cleanups. My hope is that this will
> both make the driver a little more maleable & reduce the probability of
> me gouging out my eyes.
>
> Applies cleanly atop net-next as of 5424ea27390f ("netns: get more
> entropy from net_hash_mix()").
It is rather awesome to see all of that HAL stuff disappear.
Series applied, thanks!
^ permalink raw reply
* Re: [PATCH net-next 0/2] r8169: enable ASPM on RTL8168E-VL
From: David Miller @ 2018-06-23 11:55 UTC (permalink / raw)
To: hkallweit1; +Cc: nic_swsd, netdev
In-Reply-To: <50617290-b86c-f5fd-5d74-87459b0e9a4d@gmail.com>
From: Heiner Kallweit <hkallweit1@gmail.com>
Date: Sat, 23 Jun 2018 09:49:37 +0200
> This patch series enables ASPM for the RTL8168E-VL and aligns ASPM entry
> latency handling with the vendor driver before.
Looks good to me, series applied, thank you.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox