* [PATCH AUTOSEL 5.2 206/249] net: ethernet: ti: cpsw: Assign OF node to slave devices
From: Sasha Levin @ 2019-07-15 13:46 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Marek Vasut, David S . Miller, Ivan Khoronzhuk, Sasha Levin,
linux-omap, netdev
In-Reply-To: <20190715134655.4076-1-sashal@kernel.org>
From: Marek Vasut <marex@denx.de>
[ Upstream commit 337d1727a3895775b5e5ef67d3ca0fea2e2ae768 ]
Assign OF node to CPSW slave devices, otherwise it is not possible to
bind e.g. DSA switch to them. Without this patch, the DSA code tries
to find the ethernet device by OF match, but fails to do so because
the slave device has NULL OF node.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/ti/cpsw.c | 3 +++
drivers/net/ethernet/ti/cpsw_priv.h | 1 +
2 files changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 634fc484a0b3..4e3026f9abed 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -2179,6 +2179,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
return ret;
}
+ slave_data->slave_node = slave_node;
slave_data->phy_node = of_parse_phandle(slave_node,
"phy-handle", 0);
parp = of_get_property(slave_node, "phy_id", &lenp);
@@ -2330,6 +2331,7 @@ static int cpsw_probe_dual_emac(struct cpsw_priv *priv)
/* register the network device */
SET_NETDEV_DEV(ndev, cpsw->dev);
+ ndev->dev.of_node = cpsw->slaves[1].data->slave_node;
ret = register_netdev(ndev);
if (ret)
dev_err(cpsw->dev, "cpsw: error registering net device\n");
@@ -2507,6 +2509,7 @@ static int cpsw_probe(struct platform_device *pdev)
/* register the network device */
SET_NETDEV_DEV(ndev, dev);
+ ndev->dev.of_node = cpsw->slaves[0].data->slave_node;
ret = register_netdev(ndev);
if (ret) {
dev_err(dev, "error registering net device\n");
diff --git a/drivers/net/ethernet/ti/cpsw_priv.h b/drivers/net/ethernet/ti/cpsw_priv.h
index 04795b97ee71..e32f11da2dce 100644
--- a/drivers/net/ethernet/ti/cpsw_priv.h
+++ b/drivers/net/ethernet/ti/cpsw_priv.h
@@ -272,6 +272,7 @@ struct cpsw_host_regs {
};
struct cpsw_slave_data {
+ struct device_node *slave_node;
struct device_node *phy_node;
char phy_id[MII_BUS_ID_SIZE];
int phy_if;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.2 233/249] net: hns3: fix port capbility updating issue
From: Sasha Levin @ 2019-07-15 13:46 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jian Shen, Peng Li, Huazhong Tan, David S . Miller, Sasha Levin,
netdev
In-Reply-To: <20190715134655.4076-1-sashal@kernel.org>
From: Jian Shen <shenjian15@huawei.com>
[ Upstream commit 49b1255603de5183c5e377200be3b3afe0dcdb86 ]
Currently, the driver queries the media port information, and
updates the port capability periodically. But it sets an error
mac->speed_type value, which stops update port capability.
Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index bab04d2d674a..f2bffc05e902 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2592,6 +2592,7 @@ static int hclge_get_sfp_info(struct hclge_dev *hdev, struct hclge_mac *mac)
mac->speed_ability = le32_to_cpu(resp->speed_ability);
mac->autoneg = resp->autoneg;
mac->support_autoneg = resp->autoneg_ability;
+ mac->speed_type = QUERY_ACTIVE_SPEED;
if (!resp->active_fec)
mac->fec_mode = 0;
else
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.2 237/249] Bluetooth: 6lowpan: search for destination address in all peers
From: Sasha Levin @ 2019-07-15 13:46 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Josua Mayer, Jukka Rissanen, Michael Scott, Marcel Holtmann,
Sasha Levin, linux-bluetooth, netdev
In-Reply-To: <20190715134655.4076-1-sashal@kernel.org>
From: Josua Mayer <josua.mayer@jm0.eu>
[ Upstream commit b188b03270b7f8568fc714101ce82fbf5e811c5a ]
Handle overlooked case where the target address is assigned to a peer
and neither route nor gateway exist.
For one peer, no checks are performed to see if it is meant to receive
packets for a given address.
As soon as there is a second peer however, checks are performed
to deal with routes and gateways for handling complex setups with
multiple hops to a target address.
This logic assumed that no route and no gateway imply that the
destination address can not be reached, which is false in case of a
direct peer.
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tested-by: Michael Scott <mike@foundries.io>
Signed-off-by: Josua Mayer <josua.mayer@jm0.eu>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/6lowpan.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c
index 1555b0c6f7ec..9001bf331d56 100644
--- a/net/bluetooth/6lowpan.c
+++ b/net/bluetooth/6lowpan.c
@@ -180,10 +180,16 @@ static inline struct lowpan_peer *peer_lookup_dst(struct lowpan_btle_dev *dev,
}
if (!rt) {
- nexthop = &lowpan_cb(skb)->gw;
-
- if (ipv6_addr_any(nexthop))
- return NULL;
+ if (ipv6_addr_any(&lowpan_cb(skb)->gw)) {
+ /* There is neither route nor gateway,
+ * probably the destination is a direct peer.
+ */
+ nexthop = daddr;
+ } else {
+ /* There is a known gateway
+ */
+ nexthop = &lowpan_cb(skb)->gw;
+ }
} else {
nexthop = rt6_nexthop(rt, daddr);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 001/219] ath10k: Check tx_stats before use it
From: Sasha Levin @ 2019-07-15 14:00 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Yingying Tang, Kalle Valo, Sasha Levin, ath10k, linux-wireless,
netdev
From: Yingying Tang <yintang@codeaurora.org>
[ Upstream commit 9e7251fa38978b85108c44743e1436d48e8d0d76 ]
tx_stats will be freed and set to NULL before debugfs_sta node is
removed in station disconnetion process. So if read the debugfs_sta
node there may be NULL pointer error. Add check for tx_stats before
use it to resove this issue.
Signed-off-by: Yingying Tang <yintang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/debugfs_sta.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index c704ae371c4d..42931a669b02 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -663,6 +663,13 @@ static ssize_t ath10k_dbg_sta_dump_tx_stats(struct file *file,
mutex_lock(&ar->conf_mutex);
+ if (!arsta->tx_stats) {
+ ath10k_warn(ar, "failed to get tx stats");
+ mutex_unlock(&ar->conf_mutex);
+ kfree(buf);
+ return 0;
+ }
+
spin_lock_bh(&ar->data_lock);
for (k = 0; k < ATH10K_STATS_TYPE_MAX; k++) {
for (j = 0; j < ATH10K_COUNTER_TYPE_MAX; j++) {
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 006/219] ath10k: Do not send probe response template for mesh
From: Sasha Levin @ 2019-07-15 14:00 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Surabhi Vishnoi, Kalle Valo, Sasha Levin, ath10k, linux-wireless,
netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Surabhi Vishnoi <svishnoi@codeaurora.org>
[ Upstream commit 97354f2c432788e3163134df6bb144f4b6289d87 ]
Currently mac80211 do not support probe response template for
mesh point. When WMI_SERVICE_BEACON_OFFLOAD is enabled, host
driver tries to configure probe response template for mesh, but
it fails because the interface type is not NL80211_IFTYPE_AP but
NL80211_IFTYPE_MESH_POINT.
To avoid this failure, skip sending probe response template to
firmware for mesh point.
Tested HW: WCN3990/QCA6174/QCA9984
Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/mac.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index e8997e22ceec..b500fd427595 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1630,6 +1630,10 @@ static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)
if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
return 0;
+ /* For mesh, probe response and beacon share the same template */
+ if (ieee80211_vif_is_mesh(vif))
+ return 0;
+
prb = ieee80211_proberesp_get(hw, vif);
if (!prb) {
ath10k_warn(ar, "failed to get probe resp template from mac80211\n");
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 008/219] ath9k: Check for errors when reading SREV register
From: Sasha Levin @ 2019-07-15 14:00 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Tim Schumacher, Kalle Valo, Sasha Levin, linux-wireless, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Tim Schumacher <timschumi@gmx.de>
[ Upstream commit 2f90c7e5d09437a4d8d5546feaae9f1cf48cfbe1 ]
Right now, if an error is encountered during the SREV register
read (i.e. an EIO in ath9k_regread()), that error code gets
passed all the way to __ath9k_hw_init(), where it is visible
during the "Chip rev not supported" message.
ath9k_htc 1-1.4:1.0: ath9k_htc: HTC initialized with 33 credits
ath: phy2: Mac Chip Rev 0x0f.3 is not supported by this driver
ath: phy2: Unable to initialize hardware; initialization status: -95
ath: phy2: Unable to initialize hardware; initialization status: -95
ath9k_htc: Failed to initialize the device
Check for -EIO explicitly in ath9k_hw_read_revisions() and return
a boolean based on the success of the operation. Check for that in
__ath9k_hw_init() and abort with a more debugging-friendly message
if reading the revisions wasn't successful.
ath9k_htc 1-1.4:1.0: ath9k_htc: HTC initialized with 33 credits
ath: phy2: Failed to read SREV register
ath: phy2: Could not read hardware revision
ath: phy2: Unable to initialize hardware; initialization status: -95
ath: phy2: Unable to initialize hardware; initialization status: -95
ath9k_htc: Failed to initialize the device
This helps when debugging by directly showing the first point of
failure and it could prevent possible errors if a 0x0f.3 revision
is ever supported.
Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath9k/hw.c | 32 +++++++++++++++++++++--------
1 file changed, 23 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 8581d917635a..b6773d613f0c 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -252,8 +252,9 @@ void ath9k_hw_get_channel_centers(struct ath_hw *ah,
/* Chip Revisions */
/******************/
-static void ath9k_hw_read_revisions(struct ath_hw *ah)
+static bool ath9k_hw_read_revisions(struct ath_hw *ah)
{
+ u32 srev;
u32 val;
if (ah->get_mac_revision)
@@ -269,25 +270,33 @@ static void ath9k_hw_read_revisions(struct ath_hw *ah)
val = REG_READ(ah, AR_SREV);
ah->hw_version.macRev = MS(val, AR_SREV_REVISION2);
}
- return;
+ return true;
case AR9300_DEVID_AR9340:
ah->hw_version.macVersion = AR_SREV_VERSION_9340;
- return;
+ return true;
case AR9300_DEVID_QCA955X:
ah->hw_version.macVersion = AR_SREV_VERSION_9550;
- return;
+ return true;
case AR9300_DEVID_AR953X:
ah->hw_version.macVersion = AR_SREV_VERSION_9531;
- return;
+ return true;
case AR9300_DEVID_QCA956X:
ah->hw_version.macVersion = AR_SREV_VERSION_9561;
- return;
+ return true;
}
- val = REG_READ(ah, AR_SREV) & AR_SREV_ID;
+ srev = REG_READ(ah, AR_SREV);
+
+ if (srev == -EIO) {
+ ath_err(ath9k_hw_common(ah),
+ "Failed to read SREV register");
+ return false;
+ }
+
+ val = srev & AR_SREV_ID;
if (val == 0xFF) {
- val = REG_READ(ah, AR_SREV);
+ val = srev;
ah->hw_version.macVersion =
(val & AR_SREV_VERSION2) >> AR_SREV_TYPE2_S;
ah->hw_version.macRev = MS(val, AR_SREV_REVISION2);
@@ -306,6 +315,8 @@ static void ath9k_hw_read_revisions(struct ath_hw *ah)
if (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCIE)
ah->is_pciexpress = true;
}
+
+ return true;
}
/************************************/
@@ -559,7 +570,10 @@ static int __ath9k_hw_init(struct ath_hw *ah)
struct ath_common *common = ath9k_hw_common(ah);
int r = 0;
- ath9k_hw_read_revisions(ah);
+ if (!ath9k_hw_read_revisions(ah)) {
+ ath_err(common, "Could not read hardware revisions");
+ return -EOPNOTSUPP;
+ }
switch (ah->hw_version.macVersion) {
case AR_SREV_VERSION_5416_PCI:
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 010/219] wil6210: fix missed MISC mbox interrupt
From: Sasha Levin @ 2019-07-15 14:00 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Maya Erez, Kalle Valo, Sasha Levin, linux-wireless, wil6210,
netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Maya Erez <merez@codeaurora.org>
[ Upstream commit 7441be71ba7e07791fd4fa2b07c932dff14ff4d9 ]
When MISC interrupt is triggered due to HALP bit, in parallel
to mbox events handling by the MISC threaded IRQ, new mbox
interrupt can be missed in the following scenario:
1. MISC ICR is read in the IRQ handler
2. Threaded IRQ is completed and all MISC interrupts are unmasked
3. mbox interrupt is set by FW
4. HALP is masked
The mbox interrupt in step 3 can be missed due to constant high level
of ICM.
Masking all MISC IRQs instead of masking only HALP bit in step 4
will guarantee that ICM will drop to 0 and interrupt will be triggered
once MISC interrupts will be unmasked.
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/wil6210/interrupt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index 3f5bd177d55f..e41ba24011d8 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -580,7 +580,7 @@ static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
/* no need to handle HALP ICRs until next vote */
wil->halp.handle_icr = false;
wil_dbg_irq(wil, "irq_misc: HALP IRQ invoked\n");
- wil6210_mask_halp(wil);
+ wil6210_mask_irq_misc(wil, true);
complete(&wil->halp.comp);
}
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 015/219] ath: DFS JP domain W56 fixed pulse type 3 RADAR detection
From: Sasha Levin @ 2019-07-15 14:00 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Anilkumar Kolli, Tamizh chelvam, Kalle Valo, Sasha Levin,
linux-wireless, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Anilkumar Kolli <akolli@codeaurora.org>
[ Upstream commit d8792393a783158cbb2c39939cb897dc5e5299b6 ]
Increase pulse width range from 1-2usec to 0-4usec.
During data traffic HW occasionally fails detecting radar pulses,
so that SW cannot get enough radar reports to achieve the success rate.
Tested ath10k hw and fw:
* QCA9888(10.4-3.5.1-00052)
* QCA4019(10.4-3.2.1.1-00017)
* QCA9984(10.4-3.6-00104)
* QCA988X(10.2.4-1.0-00041)
Tested ath9k hw: AR9300
Tested-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/dfs_pattern_detector.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/dfs_pattern_detector.c b/drivers/net/wireless/ath/dfs_pattern_detector.c
index d52b31b45df7..a274eb0d1968 100644
--- a/drivers/net/wireless/ath/dfs_pattern_detector.c
+++ b/drivers/net/wireless/ath/dfs_pattern_detector.c
@@ -111,7 +111,7 @@ static const struct radar_detector_specs jp_radar_ref_types[] = {
JP_PATTERN(0, 0, 1, 1428, 1428, 1, 18, 29, false),
JP_PATTERN(1, 2, 3, 3846, 3846, 1, 18, 29, false),
JP_PATTERN(2, 0, 1, 1388, 1388, 1, 18, 50, false),
- JP_PATTERN(3, 1, 2, 4000, 4000, 1, 18, 50, false),
+ JP_PATTERN(3, 0, 4, 4000, 4000, 1, 18, 50, false),
JP_PATTERN(4, 0, 5, 150, 230, 1, 23, 50, false),
JP_PATTERN(5, 6, 10, 200, 500, 1, 16, 50, false),
JP_PATTERN(6, 11, 20, 200, 500, 1, 12, 50, false),
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 016/219] ath10k: Fix encoding for protected management frames
From: Sasha Levin @ 2019-07-15 14:00 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Rakesh Pillai, Kalle Valo, Sasha Levin, ath10k, linux-wireless,
netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Rakesh Pillai <pillair@codeaurora.org>
[ Upstream commit 42f1bc43e6a97b9ddbe976eba9bd05306c990c75 ]
Currently the protected management frames are
not appended with the MIC_LEN which results in
the protected management frames being encoded
incorrectly.
Add the extra space at the end of the protected
management frames to fix this encoding error for
the protected management frames.
Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1
Fixes: 1807da49733e ("ath10k: wmi: add management tx by reference support over wmi")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 582fb11f648a..02709fc99034 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2840,8 +2840,10 @@ ath10k_wmi_tlv_op_gen_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu,
if ((ieee80211_is_action(hdr->frame_control) ||
ieee80211_is_deauth(hdr->frame_control) ||
ieee80211_is_disassoc(hdr->frame_control)) &&
- ieee80211_has_protected(hdr->frame_control))
+ ieee80211_has_protected(hdr->frame_control)) {
+ skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
buf_len += IEEE80211_CCMP_MIC_LEN;
+ }
buf_len = min_t(u32, buf_len, WMI_TLV_MGMT_TX_FRAME_MAX_LEN);
buf_len = round_up(buf_len, 4);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 028/219] net: stmmac: dwmac1000: Clear unused address entries
From: Sasha Levin @ 2019-07-15 14:00 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jose Abreu, Jose Abreu, Joao Pinto, David S . Miller,
Giuseppe Cavallaro, Alexandre Torgue, Sasha Levin, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Jose Abreu <Jose.Abreu@synopsys.com>
[ Upstream commit 9463c445590091202659cdfdd44b236acadfbd84 ]
In case we don't use a given address entry we need to clear it because
it could contain previous values that are no longer valid.
Found out while running stmmac selftests.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index 0877bde6e860..21d131347e2e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -216,6 +216,12 @@ static void dwmac1000_set_filter(struct mac_device_info *hw,
GMAC_ADDR_LOW(reg));
reg++;
}
+
+ while (reg <= perfect_addr_number) {
+ writel(0, ioaddr + GMAC_ADDR_HIGH(reg));
+ writel(0, ioaddr + GMAC_ADDR_LOW(reg));
+ reg++;
+ }
}
#ifdef FRAME_FILTER_DEBUG
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 029/219] net: stmmac: dwmac4/5: Clear unused address entries
From: Sasha Levin @ 2019-07-15 14:00 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jose Abreu, Jose Abreu, Joao Pinto, David S . Miller,
Giuseppe Cavallaro, Alexandre Torgue, Sasha Levin, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Jose Abreu <Jose.Abreu@synopsys.com>
[ Upstream commit 0620ec6c62a5a07625b65f699adc5d1b90394ee6 ]
In case we don't use a given address entry we need to clear it because
it could contain previous values that are no longer valid.
Found out while running stmmac selftests.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 7e5d5db0d516..a2f3db39221e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -444,14 +444,20 @@ static void dwmac4_set_filter(struct mac_device_info *hw,
* are required
*/
value |= GMAC_PACKET_FILTER_PR;
- } else if (!netdev_uc_empty(dev)) {
- int reg = 1;
+ } else {
struct netdev_hw_addr *ha;
+ int reg = 1;
netdev_for_each_uc_addr(ha, dev) {
dwmac4_set_umac_addr(hw, ha->addr, reg);
reg++;
}
+
+ while (reg <= GMAC_MAX_PERFECT_ADDRESSES) {
+ writel(0, ioaddr + GMAC_ADDR_HIGH(reg));
+ writel(0, ioaddr + GMAC_ADDR_LOW(reg));
+ reg++;
+ }
}
writel(value, ioaddr + GMAC_PACKET_FILTER);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 030/219] net: stmmac: Prevent missing interrupts when running NAPI
From: Sasha Levin @ 2019-07-15 14:00 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jose Abreu, Jose Abreu, Joao Pinto, David S . Miller,
Giuseppe Cavallaro, Alexandre Torgue, Sasha Levin, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Jose Abreu <Jose.Abreu@synopsys.com>
[ Upstream commit a976ca79e23f13bff79c14e7266cea4a0ea51e67 ]
When we trigger NAPI we are disabling interrupts but in case we receive
or send a packet in the meantime, as interrupts are disabled, we will
miss this event.
Trigger both NAPI instances (RX and TX) when at least one event happens
so that we don't miss any interrupts.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index a634054dcb11..f3735d0458eb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -2058,6 +2058,9 @@ static int stmmac_napi_check(struct stmmac_priv *priv, u32 chan)
&priv->xstats, chan);
struct stmmac_channel *ch = &priv->channel[chan];
+ if (status)
+ status |= handle_rx | handle_tx;
+
if ((status & handle_rx) && (chan < priv->plat->rx_queues_to_use)) {
stmmac_disable_dma_irq(priv, priv->ioaddr, chan);
napi_schedule_irqoff(&ch->rx_napi);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 031/219] net: hns3: initialize CPU reverse mapping
From: Sasha Levin @ 2019-07-15 14:00 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jian Shen, Huazhong Tan, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Jian Shen <shenjian15@huawei.com>
[ Upstream commit ffab9691bcb2fe2594f4c38bfceb4d9685b93b87 ]
Allocate CPU rmap and add entry for each irq. CPU rmap is
used in aRFS to get the queue number of the rx completion
interrupts.
In additional, remove the calling of
irq_set_affinity_notifier() in hns3_nic_init_irq(), because
we have registered notifier in irq_cpu_rmap_add() for each
vector, otherwise it may cause use-after-free issue.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/ethernet/hisilicon/hns3/hns3_enet.c | 77 ++++++++++++-------
1 file changed, 48 insertions(+), 29 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index c7d310903319..5e41ed4954f9 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -4,6 +4,9 @@
#include <linux/dma-mapping.h>
#include <linux/etherdevice.h>
#include <linux/interrupt.h>
+#ifdef CONFIG_RFS_ACCEL
+#include <linux/cpu_rmap.h>
+#endif
#include <linux/if_vlan.h>
#include <linux/ip.h>
#include <linux/ipv6.h>
@@ -72,23 +75,6 @@ static irqreturn_t hns3_irq_handle(int irq, void *vector)
return IRQ_HANDLED;
}
-/* This callback function is used to set affinity changes to the irq affinity
- * masks when the irq_set_affinity_notifier function is used.
- */
-static void hns3_nic_irq_affinity_notify(struct irq_affinity_notify *notify,
- const cpumask_t *mask)
-{
- struct hns3_enet_tqp_vector *tqp_vectors =
- container_of(notify, struct hns3_enet_tqp_vector,
- affinity_notify);
-
- tqp_vectors->affinity_mask = *mask;
-}
-
-static void hns3_nic_irq_affinity_release(struct kref *ref)
-{
-}
-
static void hns3_nic_uninit_irq(struct hns3_nic_priv *priv)
{
struct hns3_enet_tqp_vector *tqp_vectors;
@@ -100,8 +86,7 @@ static void hns3_nic_uninit_irq(struct hns3_nic_priv *priv)
if (tqp_vectors->irq_init_flag != HNS3_VECTOR_INITED)
continue;
- /* clear the affinity notifier and affinity mask */
- irq_set_affinity_notifier(tqp_vectors->vector_irq, NULL);
+ /* clear the affinity mask */
irq_set_affinity_hint(tqp_vectors->vector_irq, NULL);
/* release the irq resource */
@@ -154,12 +139,6 @@ static int hns3_nic_init_irq(struct hns3_nic_priv *priv)
return ret;
}
- tqp_vectors->affinity_notify.notify =
- hns3_nic_irq_affinity_notify;
- tqp_vectors->affinity_notify.release =
- hns3_nic_irq_affinity_release;
- irq_set_affinity_notifier(tqp_vectors->vector_irq,
- &tqp_vectors->affinity_notify);
irq_set_affinity_hint(tqp_vectors->vector_irq,
&tqp_vectors->affinity_mask);
@@ -333,6 +312,40 @@ static void hns3_tqp_disable(struct hnae3_queue *tqp)
hns3_write_dev(tqp, HNS3_RING_EN_REG, rcb_reg);
}
+static void hns3_free_rx_cpu_rmap(struct net_device *netdev)
+{
+#ifdef CONFIG_RFS_ACCEL
+ free_irq_cpu_rmap(netdev->rx_cpu_rmap);
+ netdev->rx_cpu_rmap = NULL;
+#endif
+}
+
+static int hns3_set_rx_cpu_rmap(struct net_device *netdev)
+{
+#ifdef CONFIG_RFS_ACCEL
+ struct hns3_nic_priv *priv = netdev_priv(netdev);
+ struct hns3_enet_tqp_vector *tqp_vector;
+ int i, ret;
+
+ if (!netdev->rx_cpu_rmap) {
+ netdev->rx_cpu_rmap = alloc_irq_cpu_rmap(priv->vector_num);
+ if (!netdev->rx_cpu_rmap)
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < priv->vector_num; i++) {
+ tqp_vector = &priv->tqp_vector[i];
+ ret = irq_cpu_rmap_add(netdev->rx_cpu_rmap,
+ tqp_vector->vector_irq);
+ if (ret) {
+ hns3_free_rx_cpu_rmap(netdev);
+ return ret;
+ }
+ }
+#endif
+ return 0;
+}
+
static int hns3_nic_net_up(struct net_device *netdev)
{
struct hns3_nic_priv *priv = netdev_priv(netdev);
@@ -344,11 +357,16 @@ static int hns3_nic_net_up(struct net_device *netdev)
if (ret)
return ret;
+ /* the device can work without cpu rmap, only aRFS needs it */
+ ret = hns3_set_rx_cpu_rmap(netdev);
+ if (ret)
+ netdev_warn(netdev, "set rx cpu rmap fail, ret=%d!\n", ret);
+
/* get irq resource for all vectors */
ret = hns3_nic_init_irq(priv);
if (ret) {
netdev_err(netdev, "hns init irq failed! ret=%d\n", ret);
- return ret;
+ goto free_rmap;
}
clear_bit(HNS3_NIC_STATE_DOWN, &priv->state);
@@ -377,7 +395,8 @@ static int hns3_nic_net_up(struct net_device *netdev)
hns3_vector_disable(&priv->tqp_vector[j]);
hns3_nic_uninit_irq(priv);
-
+free_rmap:
+ hns3_free_rx_cpu_rmap(netdev);
return ret;
}
@@ -460,6 +479,8 @@ static void hns3_nic_net_down(struct net_device *netdev)
if (ops->stop)
ops->stop(priv->ae_handle);
+ hns3_free_rx_cpu_rmap(netdev);
+
/* free irq resources */
hns3_nic_uninit_irq(priv);
@@ -3198,8 +3219,6 @@ static void hns3_nic_uninit_vector_data(struct hns3_nic_priv *priv)
hns3_free_vector_ring_chain(tqp_vector, &vector_ring_chain);
if (tqp_vector->irq_init_flag == HNS3_VECTOR_INITED) {
- irq_set_affinity_notifier(tqp_vector->vector_irq,
- NULL);
irq_set_affinity_hint(tqp_vector->vector_irq, NULL);
free_irq(tqp_vector->vector_irq, tqp_vector);
tqp_vector->irq_init_flag = HNS3_VECTOR_NOT_INITED;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 065/219] net: fec: Do not use netdev messages too early
From: Sasha Levin @ 2019-07-15 14:01 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: Fabio Estevam, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Fabio Estevam <festevam@gmail.com>
[ Upstream commit a19a0582363b9a5f8ba812f34f1b8df394898780 ]
When a valid MAC address is not found the current messages
are shown:
fec 2188000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00
fec 2188000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: aa:9f:25:eb:7e:aa
Since the network device has not been registered at this point, it is better
to use dev_err()/dev_info() instead, which will provide cleaner log
messages like these:
fec 2188000.ethernet: Invalid MAC address: 00:00:00:00:00:00
fec 2188000.ethernet: Using random MAC address: aa:9f:25:eb:7e:aa
Tested on a imx6dl-pico-pi board.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/freescale/fec_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 878ccce1dfcd..87a9c5716958 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1689,10 +1689,10 @@ static void fec_get_mac(struct net_device *ndev)
*/
if (!is_valid_ether_addr(iap)) {
/* Report it and use a random ethernet address instead */
- netdev_err(ndev, "Invalid MAC address: %pM\n", iap);
+ dev_err(&fep->pdev->dev, "Invalid MAC address: %pM\n", iap);
eth_hw_addr_random(ndev);
- netdev_info(ndev, "Using random MAC address: %pM\n",
- ndev->dev_addr);
+ dev_info(&fep->pdev->dev, "Using random MAC address: %pM\n",
+ ndev->dev_addr);
return;
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 066/219] net: axienet: Fix race condition causing TX hang
From: Sasha Levin @ 2019-07-15 14:01 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Robert Hancock, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Robert Hancock <hancock@sedsystems.ca>
[ Upstream commit 7de44285c1f69ccfbe8be1d6a16fcd956681fee6 ]
It is possible that the interrupt handler fires and frees up space in
the TX ring in between checking for sufficient TX ring space and
stopping the TX queue in axienet_start_xmit. If this happens, the
queue wake from the interrupt handler will occur before the queue is
stopped, causing a lost wakeup and the adapter's transmit hanging.
To avoid this, after stopping the queue, check again whether there is
sufficient space in the TX ring. If so, wake up the queue again.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/ethernet/xilinx/xilinx_axienet_main.c | 20 ++++++++++++++++---
1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 4041c75997ba..38a8ef194e05 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -614,6 +614,10 @@ static void axienet_start_xmit_done(struct net_device *ndev)
ndev->stats.tx_packets += packets;
ndev->stats.tx_bytes += size;
+
+ /* Matches barrier in axienet_start_xmit */
+ smp_mb();
+
netif_wake_queue(ndev);
}
@@ -669,9 +673,19 @@ axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev)
cur_p = &lp->tx_bd_v[lp->tx_bd_tail];
if (axienet_check_tx_bd_space(lp, num_frag)) {
- if (!netif_queue_stopped(ndev))
- netif_stop_queue(ndev);
- return NETDEV_TX_BUSY;
+ if (netif_queue_stopped(ndev))
+ return NETDEV_TX_BUSY;
+
+ netif_stop_queue(ndev);
+
+ /* Matches barrier in axienet_start_xmit_done */
+ smp_mb();
+
+ /* Space might have just been freed - check again */
+ if (axienet_check_tx_bd_space(lp, num_frag))
+ return NETDEV_TX_BUSY;
+
+ netif_wake_queue(ndev);
}
if (skb->ip_summed == CHECKSUM_PARTIAL) {
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 092/219] net: hns3: fix for dereferencing before null checking
From: Sasha Levin @ 2019-07-15 14:01 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Yunsheng Lin, Peng Li, Huazhong Tan, David S . Miller,
Sasha Levin, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Yunsheng Lin <linyunsheng@huawei.com>
[ Upstream commit 757188005f905664b0186b88cf26a7e844190a63 ]
The netdev is dereferenced before null checking in the function
hns3_setup_tc.
This patch moves the dereferencing after the null checking.
Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index cac17152157d..6afdd376bc03 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -1497,12 +1497,12 @@ static void hns3_nic_get_stats64(struct net_device *netdev,
static int hns3_setup_tc(struct net_device *netdev, void *type_data)
{
struct tc_mqprio_qopt_offload *mqprio_qopt = type_data;
- struct hnae3_handle *h = hns3_get_handle(netdev);
- struct hnae3_knic_private_info *kinfo = &h->kinfo;
u8 *prio_tc = mqprio_qopt->qopt.prio_tc_map;
+ struct hnae3_knic_private_info *kinfo;
u8 tc = mqprio_qopt->qopt.num_tc;
u16 mode = mqprio_qopt->mode;
u8 hw = mqprio_qopt->qopt.hw;
+ struct hnae3_handle *h;
if (!((hw == TC_MQPRIO_HW_OFFLOAD_TCS &&
mode == TC_MQPRIO_MODE_CHANNEL) || (!hw && tc == 0)))
@@ -1514,6 +1514,9 @@ static int hns3_setup_tc(struct net_device *netdev, void *type_data)
if (!netdev)
return -EINVAL;
+ h = hns3_get_handle(netdev);
+ kinfo = &h->kinfo;
+
return (kinfo->dcb_ops && kinfo->dcb_ops->setup_tc) ?
kinfo->dcb_ops->setup_tc(h, tc, prio_tc) : -EOPNOTSUPP;
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 091/219] qed: iWARP - Fix tc for MPA ll2 connection
From: Sasha Levin @ 2019-07-15 14:01 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Michal Kalderon, Ariel Elior, David S . Miller, Sasha Levin,
netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Michal Kalderon <michal.kalderon@marvell.com>
[ Upstream commit cb94d52b93c74fe1f2595734fabeda9f8ae891ee ]
The driver needs to assign a lossless traffic class for the MPA ll2
connection to ensure no packets are dropped when returning from the
driver as they will never be re-transmitted by the peer.
Fixes: ae3488ff37dc ("qed: Add ll2 connection for processing unaligned MPA packets")
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/qlogic/qed/qed_iwarp.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
index ded556b7bab5..eeea8683d99b 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_iwarp.c
@@ -2708,6 +2708,8 @@ qed_iwarp_ll2_start(struct qed_hwfn *p_hwfn,
data.input.rx_num_desc = n_ooo_bufs * 2;
data.input.tx_num_desc = data.input.rx_num_desc;
data.input.tx_max_bds_per_packet = QED_IWARP_MAX_BDS_PER_FPDU;
+ data.input.tx_tc = PKT_LB_TC;
+ data.input.tx_dest = QED_LL2_TX_DEST_LB;
data.p_connection_handle = &iwarp_info->ll2_mpa_handle;
data.input.secondary_queue = true;
data.cbs = &cbs;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 111/219] net: netsec: initialize tx ring on ndo_open
From: Sasha Levin @ 2019-07-15 14:01 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Ilias Apalodimas, Ard Biesheuvel, David S . Miller, Sasha Levin,
netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Ilias Apalodimas <ilias.apalodimas@linaro.org>
[ Upstream commit 39e3622edeffa63c2871153d8743c5825b139968 ]
Since we changed the Tx ring handling and now depends on bit31 to figure
out the owner of the descriptor, we should initialize this every time
the device goes down-up instead of doing it once on driver init. If the
value is not correctly initialized the device won't have any available
descriptors
Changes since v1:
- Typo fixes
Fixes: 35e07d234739 ("net: socionext: remove mmio reads on Tx")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/socionext/netsec.c | 32 ++++++++++++++-----------
1 file changed, 18 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c
index cba5881b2746..a10ef700f16d 100644
--- a/drivers/net/ethernet/socionext/netsec.c
+++ b/drivers/net/ethernet/socionext/netsec.c
@@ -1029,7 +1029,6 @@ static void netsec_free_dring(struct netsec_priv *priv, int id)
static int netsec_alloc_dring(struct netsec_priv *priv, enum ring_id id)
{
struct netsec_desc_ring *dring = &priv->desc_ring[id];
- int i;
dring->vaddr = dma_alloc_coherent(priv->dev, DESC_SZ * DESC_NUM,
&dring->desc_dma, GFP_KERNEL);
@@ -1040,19 +1039,6 @@ static int netsec_alloc_dring(struct netsec_priv *priv, enum ring_id id)
if (!dring->desc)
goto err;
- if (id == NETSEC_RING_TX) {
- for (i = 0; i < DESC_NUM; i++) {
- struct netsec_de *de;
-
- de = dring->vaddr + (DESC_SZ * i);
- /* de->attr is not going to be accessed by the NIC
- * until netsec_set_tx_de() is called.
- * No need for a dma_wmb() here
- */
- de->attr = 1U << NETSEC_TX_SHIFT_OWN_FIELD;
- }
- }
-
return 0;
err:
netsec_free_dring(priv, id);
@@ -1060,6 +1046,23 @@ static int netsec_alloc_dring(struct netsec_priv *priv, enum ring_id id)
return -ENOMEM;
}
+static void netsec_setup_tx_dring(struct netsec_priv *priv)
+{
+ struct netsec_desc_ring *dring = &priv->desc_ring[NETSEC_RING_TX];
+ int i;
+
+ for (i = 0; i < DESC_NUM; i++) {
+ struct netsec_de *de;
+
+ de = dring->vaddr + (DESC_SZ * i);
+ /* de->attr is not going to be accessed by the NIC
+ * until netsec_set_tx_de() is called.
+ * No need for a dma_wmb() here
+ */
+ de->attr = 1U << NETSEC_TX_SHIFT_OWN_FIELD;
+ }
+}
+
static int netsec_setup_rx_dring(struct netsec_priv *priv)
{
struct netsec_desc_ring *dring = &priv->desc_ring[NETSEC_RING_RX];
@@ -1361,6 +1364,7 @@ static int netsec_netdev_open(struct net_device *ndev)
pm_runtime_get_sync(priv->dev);
+ netsec_setup_tx_dring(priv);
ret = netsec_setup_rx_dring(priv);
if (ret) {
netif_err(priv, probe, priv->ndev,
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 140/219] mt7601u: do not schedule rx_tasklet when the device has been disconnected
From: Sasha Levin @ 2019-07-15 14:02 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Lorenzo Bianconi, Kalle Valo, Sasha Levin, linux-wireless, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit 4079e8ccabc3b6d1b503f2376123cb515d14921f ]
Do not schedule rx_tasklet when the usb dongle is disconnected.
Moreover do not grub rx_lock in mt7601u_kill_rx since usb_poison_urb
can run concurrently with urb completion and we can unlink urbs from rx
ring in any order.
This patch fixes the common kernel warning reported when
the device is removed.
[ 24.921354] usb 3-14: USB disconnect, device number 7
[ 24.921593] ------------[ cut here ]------------
[ 24.921594] RX urb mismatch
[ 24.921675] WARNING: CPU: 4 PID: 163 at drivers/net/wireless/mediatek/mt7601u/dma.c:200 mt7601u_complete_rx+0xcb/0xd0 [mt7601u]
[ 24.921769] CPU: 4 PID: 163 Comm: kworker/4:2 Tainted: G OE 4.19.31-041931-generic #201903231635
[ 24.921770] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P1.30 05/23/2014
[ 24.921782] Workqueue: usb_hub_wq hub_event
[ 24.921797] RIP: 0010:mt7601u_complete_rx+0xcb/0xd0 [mt7601u]
[ 24.921800] RSP: 0018:ffff9bd9cfd03d08 EFLAGS: 00010086
[ 24.921802] RAX: 0000000000000000 RBX: ffff9bd9bf043540 RCX: 0000000000000006
[ 24.921803] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff9bd9cfd16420
[ 24.921804] RBP: ffff9bd9cfd03d28 R08: 0000000000000002 R09: 00000000000003a8
[ 24.921805] R10: 0000002f485fca34 R11: 0000000000000000 R12: ffff9bd9bf043c1c
[ 24.921806] R13: ffff9bd9c62fa3c0 R14: 0000000000000082 R15: 0000000000000000
[ 24.921807] FS: 0000000000000000(0000) GS:ffff9bd9cfd00000(0000) knlGS:0000000000000000
[ 24.921808] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 24.921808] CR2: 00007fb2648b0000 CR3: 0000000142c0a004 CR4: 00000000001606e0
[ 24.921809] Call Trace:
[ 24.921812] <IRQ>
[ 24.921819] __usb_hcd_giveback_urb+0x8b/0x140
[ 24.921821] usb_hcd_giveback_urb+0xca/0xe0
[ 24.921828] xhci_giveback_urb_in_irq.isra.42+0x82/0xf0
[ 24.921834] handle_cmd_completion+0xe02/0x10d0
[ 24.921837] xhci_irq+0x274/0x4a0
[ 24.921838] xhci_msi_irq+0x11/0x20
[ 24.921851] __handle_irq_event_percpu+0x44/0x190
[ 24.921856] handle_irq_event_percpu+0x32/0x80
[ 24.921861] handle_irq_event+0x3b/0x5a
[ 24.921867] handle_edge_irq+0x80/0x190
[ 24.921874] handle_irq+0x20/0x30
[ 24.921889] do_IRQ+0x4e/0xe0
[ 24.921891] common_interrupt+0xf/0xf
[ 24.921892] </IRQ>
[ 24.921900] RIP: 0010:usb_hcd_flush_endpoint+0x78/0x180
[ 24.921354] usb 3-14: USB disconnect, device number 7
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt7601u/dma.c | 33 +++++++++++----------
1 file changed, 18 insertions(+), 15 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt7601u/dma.c b/drivers/net/wireless/mediatek/mt7601u/dma.c
index f7edeffb2b19..134f8a5bb5d4 100644
--- a/drivers/net/wireless/mediatek/mt7601u/dma.c
+++ b/drivers/net/wireless/mediatek/mt7601u/dma.c
@@ -193,10 +193,23 @@ static void mt7601u_complete_rx(struct urb *urb)
struct mt7601u_rx_queue *q = &dev->rx_q;
unsigned long flags;
- spin_lock_irqsave(&dev->rx_lock, flags);
+ /* do no schedule rx tasklet if urb has been unlinked
+ * or the device has been removed
+ */
+ switch (urb->status) {
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ case -ENOENT:
+ return;
+ default:
+ dev_err_ratelimited(dev->dev, "rx urb failed: %d\n",
+ urb->status);
+ /* fall through */
+ case 0:
+ break;
+ }
- if (mt7601u_urb_has_error(urb))
- dev_err(dev->dev, "Error: RX urb failed:%d\n", urb->status);
+ spin_lock_irqsave(&dev->rx_lock, flags);
if (WARN_ONCE(q->e[q->end].urb != urb, "RX urb mismatch"))
goto out;
@@ -363,19 +376,9 @@ int mt7601u_dma_enqueue_tx(struct mt7601u_dev *dev, struct sk_buff *skb,
static void mt7601u_kill_rx(struct mt7601u_dev *dev)
{
int i;
- unsigned long flags;
- spin_lock_irqsave(&dev->rx_lock, flags);
-
- for (i = 0; i < dev->rx_q.entries; i++) {
- int next = dev->rx_q.end;
-
- spin_unlock_irqrestore(&dev->rx_lock, flags);
- usb_poison_urb(dev->rx_q.e[next].urb);
- spin_lock_irqsave(&dev->rx_lock, flags);
- }
-
- spin_unlock_irqrestore(&dev->rx_lock, flags);
+ for (i = 0; i < dev->rx_q.entries; i++)
+ usb_poison_urb(dev->rx_q.e[i].urb);
}
static int mt7601u_submit_rx_buf(struct mt7601u_dev *dev,
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 143/219] ipvs: fix tinfo memory leak in start_sync_thread
From: Sasha Levin @ 2019-07-15 14:02 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Julian Anastasov, syzbot+7e2e50c8adfccd2e5041, Eric Biggers,
Simon Horman, Pablo Neira Ayuso, Sasha Levin, netdev, lvs-devel,
netfilter-devel, coreteam
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Julian Anastasov <ja@ssi.bg>
[ Upstream commit 5db7c8b9f9fc2aeec671ae3ca6375752c162e0e7 ]
syzkaller reports for memory leak in start_sync_thread [1]
As Eric points out, kthread may start and stop before the
threadfn function is called, so there is no chance the
data (tinfo in our case) to be released in thread.
Fix this by releasing tinfo in the controlling code instead.
[1]
BUG: memory leak
unreferenced object 0xffff8881206bf700 (size 32):
comm "syz-executor761", pid 7268, jiffies 4294943441 (age 20.470s)
hex dump (first 32 bytes):
00 40 7c 09 81 88 ff ff 80 45 b8 21 81 88 ff ff .@|......E.!....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<0000000057619e23>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
[<0000000057619e23>] slab_post_alloc_hook mm/slab.h:439 [inline]
[<0000000057619e23>] slab_alloc mm/slab.c:3326 [inline]
[<0000000057619e23>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
[<0000000086ce5479>] kmalloc include/linux/slab.h:547 [inline]
[<0000000086ce5479>] start_sync_thread+0x5d2/0xe10 net/netfilter/ipvs/ip_vs_sync.c:1862
[<000000001a9229cc>] do_ip_vs_set_ctl+0x4c5/0x780 net/netfilter/ipvs/ip_vs_ctl.c:2402
[<00000000ece457c8>] nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
[<00000000ece457c8>] nf_setsockopt+0x4c/0x80 net/netfilter/nf_sockopt.c:115
[<00000000942f62d4>] ip_setsockopt net/ipv4/ip_sockglue.c:1258 [inline]
[<00000000942f62d4>] ip_setsockopt+0x9b/0xb0 net/ipv4/ip_sockglue.c:1238
[<00000000a56a8ffd>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616
[<00000000fa895401>] sock_common_setsockopt+0x38/0x50 net/core/sock.c:3130
[<0000000095eef4cf>] __sys_setsockopt+0x98/0x120 net/socket.c:2078
[<000000009747cf88>] __do_sys_setsockopt net/socket.c:2089 [inline]
[<000000009747cf88>] __se_sys_setsockopt net/socket.c:2086 [inline]
[<000000009747cf88>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086
[<00000000ded8ba80>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
[<00000000893b4ac8>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: syzbot+7e2e50c8adfccd2e5041@syzkaller.appspotmail.com
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 998e7a76804b ("ipvs: Use kthread_run() instead of doing a double-fork via kernel_thread()")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/net/ip_vs.h | 6 +-
net/netfilter/ipvs/ip_vs_ctl.c | 4 -
net/netfilter/ipvs/ip_vs_sync.c | 134 +++++++++++++++++---------------
3 files changed, 76 insertions(+), 68 deletions(-)
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 047f9a5ccaad..1790bb41c964 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -803,11 +803,12 @@ struct ipvs_master_sync_state {
struct ip_vs_sync_buff *sync_buff;
unsigned long sync_queue_len;
unsigned int sync_queue_delay;
- struct task_struct *master_thread;
struct delayed_work master_wakeup_work;
struct netns_ipvs *ipvs;
};
+struct ip_vs_sync_thread_data;
+
/* How much time to keep dests in trash */
#define IP_VS_DEST_TRASH_PERIOD (120 * HZ)
@@ -938,7 +939,8 @@ struct netns_ipvs {
spinlock_t sync_lock;
struct ipvs_master_sync_state *ms;
spinlock_t sync_buff_lock;
- struct task_struct **backup_threads;
+ struct ip_vs_sync_thread_data *master_tinfo;
+ struct ip_vs_sync_thread_data *backup_tinfo;
int threads_mask;
volatile int sync_state;
struct mutex sync_mutex;
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c
index 053cd96b9c76..179e9d11e41b 100644
--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -2382,9 +2382,7 @@ do_ip_vs_set_ctl(struct sock *sk, int cmd, void __user *user, unsigned int len)
cfg.syncid = dm->syncid;
ret = start_sync_thread(ipvs, &cfg, dm->state);
} else {
- mutex_lock(&ipvs->sync_mutex);
ret = stop_sync_thread(ipvs, dm->state);
- mutex_unlock(&ipvs->sync_mutex);
}
goto out_dec;
}
@@ -3490,10 +3488,8 @@ static int ip_vs_genl_del_daemon(struct netns_ipvs *ipvs, struct nlattr **attrs)
if (!attrs[IPVS_DAEMON_ATTR_STATE])
return -EINVAL;
- mutex_lock(&ipvs->sync_mutex);
ret = stop_sync_thread(ipvs,
nla_get_u32(attrs[IPVS_DAEMON_ATTR_STATE]));
- mutex_unlock(&ipvs->sync_mutex);
return ret;
}
diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c
index 2526be6b3d90..a4a78c4b06de 100644
--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -195,6 +195,7 @@ union ip_vs_sync_conn {
#define IPVS_OPT_F_PARAM (1 << (IPVS_OPT_PARAM-1))
struct ip_vs_sync_thread_data {
+ struct task_struct *task;
struct netns_ipvs *ipvs;
struct socket *sock;
char *buf;
@@ -374,8 +375,11 @@ static inline void sb_queue_tail(struct netns_ipvs *ipvs,
max(IPVS_SYNC_SEND_DELAY, 1));
ms->sync_queue_len++;
list_add_tail(&sb->list, &ms->sync_queue);
- if ((++ms->sync_queue_delay) == IPVS_SYNC_WAKEUP_RATE)
- wake_up_process(ms->master_thread);
+ if ((++ms->sync_queue_delay) == IPVS_SYNC_WAKEUP_RATE) {
+ int id = (int)(ms - ipvs->ms);
+
+ wake_up_process(ipvs->master_tinfo[id].task);
+ }
} else
ip_vs_sync_buff_release(sb);
spin_unlock(&ipvs->sync_lock);
@@ -1636,8 +1640,10 @@ static void master_wakeup_work_handler(struct work_struct *work)
spin_lock_bh(&ipvs->sync_lock);
if (ms->sync_queue_len &&
ms->sync_queue_delay < IPVS_SYNC_WAKEUP_RATE) {
+ int id = (int)(ms - ipvs->ms);
+
ms->sync_queue_delay = IPVS_SYNC_WAKEUP_RATE;
- wake_up_process(ms->master_thread);
+ wake_up_process(ipvs->master_tinfo[id].task);
}
spin_unlock_bh(&ipvs->sync_lock);
}
@@ -1703,10 +1709,6 @@ static int sync_thread_master(void *data)
if (sb)
ip_vs_sync_buff_release(sb);
- /* release the sending multicast socket */
- sock_release(tinfo->sock);
- kfree(tinfo);
-
return 0;
}
@@ -1740,11 +1742,6 @@ static int sync_thread_backup(void *data)
}
}
- /* release the sending multicast socket */
- sock_release(tinfo->sock);
- kfree(tinfo->buf);
- kfree(tinfo);
-
return 0;
}
@@ -1752,8 +1749,8 @@ static int sync_thread_backup(void *data)
int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
int state)
{
- struct ip_vs_sync_thread_data *tinfo = NULL;
- struct task_struct **array = NULL, *task;
+ struct ip_vs_sync_thread_data *ti = NULL, *tinfo;
+ struct task_struct *task;
struct net_device *dev;
char *name;
int (*threadfn)(void *data);
@@ -1822,7 +1819,7 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
threadfn = sync_thread_master;
} else if (state == IP_VS_STATE_BACKUP) {
result = -EEXIST;
- if (ipvs->backup_threads)
+ if (ipvs->backup_tinfo)
goto out_early;
ipvs->bcfg = *c;
@@ -1849,28 +1846,22 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
master_wakeup_work_handler);
ms->ipvs = ipvs;
}
- } else {
- array = kcalloc(count, sizeof(struct task_struct *),
- GFP_KERNEL);
- result = -ENOMEM;
- if (!array)
- goto out;
}
+ result = -ENOMEM;
+ ti = kcalloc(count, sizeof(struct ip_vs_sync_thread_data),
+ GFP_KERNEL);
+ if (!ti)
+ goto out;
for (id = 0; id < count; id++) {
- result = -ENOMEM;
- tinfo = kmalloc(sizeof(*tinfo), GFP_KERNEL);
- if (!tinfo)
- goto out;
+ tinfo = &ti[id];
tinfo->ipvs = ipvs;
- tinfo->sock = NULL;
if (state == IP_VS_STATE_BACKUP) {
+ result = -ENOMEM;
tinfo->buf = kmalloc(ipvs->bcfg.sync_maxlen,
GFP_KERNEL);
if (!tinfo->buf)
goto out;
- } else {
- tinfo->buf = NULL;
}
tinfo->id = id;
if (state == IP_VS_STATE_MASTER)
@@ -1885,17 +1876,15 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
result = PTR_ERR(task);
goto out;
}
- tinfo = NULL;
- if (state == IP_VS_STATE_MASTER)
- ipvs->ms[id].master_thread = task;
- else
- array[id] = task;
+ tinfo->task = task;
}
/* mark as active */
- if (state == IP_VS_STATE_BACKUP)
- ipvs->backup_threads = array;
+ if (state == IP_VS_STATE_MASTER)
+ ipvs->master_tinfo = ti;
+ else
+ ipvs->backup_tinfo = ti;
spin_lock_bh(&ipvs->sync_buff_lock);
ipvs->sync_state |= state;
spin_unlock_bh(&ipvs->sync_buff_lock);
@@ -1910,29 +1899,31 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
out:
/* We do not need RTNL lock anymore, release it here so that
- * sock_release below and in the kthreads can use rtnl_lock
- * to leave the mcast group.
+ * sock_release below can use rtnl_lock to leave the mcast group.
*/
rtnl_unlock();
- count = id;
- while (count-- > 0) {
- if (state == IP_VS_STATE_MASTER)
- kthread_stop(ipvs->ms[count].master_thread);
- else
- kthread_stop(array[count]);
+ id = min(id, count - 1);
+ if (ti) {
+ for (tinfo = ti + id; tinfo >= ti; tinfo--) {
+ if (tinfo->task)
+ kthread_stop(tinfo->task);
+ }
}
if (!(ipvs->sync_state & IP_VS_STATE_MASTER)) {
kfree(ipvs->ms);
ipvs->ms = NULL;
}
mutex_unlock(&ipvs->sync_mutex);
- if (tinfo) {
- if (tinfo->sock)
- sock_release(tinfo->sock);
- kfree(tinfo->buf);
- kfree(tinfo);
+
+ /* No more mutexes, release socks */
+ if (ti) {
+ for (tinfo = ti + id; tinfo >= ti; tinfo--) {
+ if (tinfo->sock)
+ sock_release(tinfo->sock);
+ kfree(tinfo->buf);
+ }
+ kfree(ti);
}
- kfree(array);
return result;
out_early:
@@ -1944,15 +1935,18 @@ int start_sync_thread(struct netns_ipvs *ipvs, struct ipvs_sync_daemon_cfg *c,
int stop_sync_thread(struct netns_ipvs *ipvs, int state)
{
- struct task_struct **array;
+ struct ip_vs_sync_thread_data *ti, *tinfo;
int id;
int retc = -EINVAL;
IP_VS_DBG(7, "%s(): pid %d\n", __func__, task_pid_nr(current));
+ mutex_lock(&ipvs->sync_mutex);
if (state == IP_VS_STATE_MASTER) {
+ retc = -ESRCH;
if (!ipvs->ms)
- return -ESRCH;
+ goto err;
+ ti = ipvs->master_tinfo;
/*
* The lock synchronizes with sb_queue_tail(), so that we don't
@@ -1971,38 +1965,56 @@ int stop_sync_thread(struct netns_ipvs *ipvs, int state)
struct ipvs_master_sync_state *ms = &ipvs->ms[id];
int ret;
+ tinfo = &ti[id];
pr_info("stopping master sync thread %d ...\n",
- task_pid_nr(ms->master_thread));
+ task_pid_nr(tinfo->task));
cancel_delayed_work_sync(&ms->master_wakeup_work);
- ret = kthread_stop(ms->master_thread);
+ ret = kthread_stop(tinfo->task);
if (retc >= 0)
retc = ret;
}
kfree(ipvs->ms);
ipvs->ms = NULL;
+ ipvs->master_tinfo = NULL;
} else if (state == IP_VS_STATE_BACKUP) {
- if (!ipvs->backup_threads)
- return -ESRCH;
+ retc = -ESRCH;
+ if (!ipvs->backup_tinfo)
+ goto err;
+ ti = ipvs->backup_tinfo;
ipvs->sync_state &= ~IP_VS_STATE_BACKUP;
- array = ipvs->backup_threads;
retc = 0;
for (id = ipvs->threads_mask; id >= 0; id--) {
int ret;
+ tinfo = &ti[id];
pr_info("stopping backup sync thread %d ...\n",
- task_pid_nr(array[id]));
- ret = kthread_stop(array[id]);
+ task_pid_nr(tinfo->task));
+ ret = kthread_stop(tinfo->task);
if (retc >= 0)
retc = ret;
}
- kfree(array);
- ipvs->backup_threads = NULL;
+ ipvs->backup_tinfo = NULL;
+ } else {
+ goto err;
}
+ id = ipvs->threads_mask;
+ mutex_unlock(&ipvs->sync_mutex);
+
+ /* No more mutexes, release socks */
+ for (tinfo = ti + id; tinfo >= ti; tinfo--) {
+ if (tinfo->sock)
+ sock_release(tinfo->sock);
+ kfree(tinfo->buf);
+ }
+ kfree(ti);
/* decrease the module use count */
ip_vs_use_count_dec();
+ return retc;
+err:
+ mutex_unlock(&ipvs->sync_mutex);
return retc;
}
@@ -2021,7 +2033,6 @@ void ip_vs_sync_net_cleanup(struct netns_ipvs *ipvs)
{
int retc;
- mutex_lock(&ipvs->sync_mutex);
retc = stop_sync_thread(ipvs, IP_VS_STATE_MASTER);
if (retc && retc != -ESRCH)
pr_err("Failed to stop Master Daemon\n");
@@ -2029,5 +2040,4 @@ void ip_vs_sync_net_cleanup(struct netns_ipvs *ipvs)
retc = stop_sync_thread(ipvs, IP_VS_STATE_BACKUP);
if (retc && retc != -ESRCH)
pr_err("Failed to stop Backup Daemon\n");
- mutex_unlock(&ipvs->sync_mutex);
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 164/219] ath9k: correctly handle short radar pulses
From: Sasha Levin @ 2019-07-15 14:02 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Zefir Kurtisi, Kalle Valo, Sasha Levin, linux-wireless, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Zefir Kurtisi <zefir.kurtisi@neratec.com>
[ Upstream commit df5c4150501ee7e86383be88f6490d970adcf157 ]
In commit 3c0efb745a17 ("ath9k: discard undersized packets")
the lower bound of RX packets was set to 10 (min ACK size) to
filter those that would otherwise be treated as invalid at
mac80211.
Alas, short radar pulses are reported as PHY_ERROR frames
with length set to 3. Therefore their detection stopped
working after that commit.
NOTE: ath9k drivers built thereafter will not pass DFS
certification.
This extends the criteria for short packets to explicitly
handle PHY_ERROR frames.
Fixes: 3c0efb745a17 ("ath9k: discard undersized packets")
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath9k/recv.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 4e97f7f3b2a3..06e660858766 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -815,6 +815,7 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_hdr *hdr;
bool discard_current = sc->rx.discard_next;
+ bool is_phyerr;
/*
* Discard corrupt descriptors which are marked in
@@ -827,8 +828,11 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
/*
* Discard zero-length packets and packets smaller than an ACK
+ * which are not PHY_ERROR (short radar pulses have a length of 3)
*/
- if (rx_stats->rs_datalen < 10) {
+ is_phyerr = rx_stats->rs_status & ATH9K_RXERR_PHY;
+ if (!rx_stats->rs_datalen ||
+ (rx_stats->rs_datalen < 10 && !is_phyerr)) {
RX_STAT_INC(sc, rx_len_err);
goto corrupt;
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 176/219] ath10k: destroy sdio workqueue while remove sdio module
From: Sasha Levin @ 2019-07-15 14:02 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Wen Gong, Kalle Valo, Sasha Levin, ath10k, linux-wireless, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Wen Gong <wgong@codeaurora.org>
[ Upstream commit 3ed39f8e747a7aafeec07bb244f2c3a1bdca5730 ]
The workqueue need to flush and destory while remove sdio module,
otherwise it will have thread which is not destory after remove
sdio modules.
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/sdio.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c
index 73ef3e75d199..28bdf0212538 100644
--- a/drivers/net/wireless/ath/ath10k/sdio.c
+++ b/drivers/net/wireless/ath/ath10k/sdio.c
@@ -2081,6 +2081,9 @@ static void ath10k_sdio_remove(struct sdio_func *func)
cancel_work_sync(&ar_sdio->wr_async_work);
ath10k_core_unregister(ar);
ath10k_core_destroy(ar);
+
+ flush_workqueue(ar_sdio->workqueue);
+ destroy_workqueue(ar_sdio->workqueue);
}
static const struct sdio_device_id ath10k_sdio_devices[] = {
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 177/219] net: mvpp2: prs: Don't override the sign bit in SRAM parser shift
From: Sasha Levin @ 2019-07-15 14:02 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Maxime Chevallier, Alan Winkowski, David S . Miller, Sasha Levin,
netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
[ Upstream commit 8ec3ede559956f8ad58db7b57d25ac724bab69e9 ]
The Header Parser allows identifying various fields in the packet
headers, used for various kind of filtering and classification
steps.
This is a re-entrant process, where the offset in the packet header
depends on the previous lookup results. This offset is represented in
the SRAM results of the TCAM, as a shift to be operated.
This shift can be negative in some cases, such as in IPv6 parsing.
This commit prevents overriding the sign bit when setting the shift
value, which could cause instabilities when parsing IPv6 flows.
Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Suggested-by: Alan Winkowski <walan@marvell.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
index ae2240074d8e..5692c6087bbb 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
@@ -312,7 +312,8 @@ static void mvpp2_prs_sram_shift_set(struct mvpp2_prs_entry *pe, int shift,
}
/* Set value */
- pe->sram[MVPP2_BIT_TO_WORD(MVPP2_PRS_SRAM_SHIFT_OFFS)] = shift & MVPP2_PRS_SRAM_SHIFT_MASK;
+ pe->sram[MVPP2_BIT_TO_WORD(MVPP2_PRS_SRAM_SHIFT_OFFS)] |=
+ shift & MVPP2_PRS_SRAM_SHIFT_MASK;
/* Reset and set operation */
mvpp2_prs_sram_bits_clear(pe, MVPP2_PRS_SRAM_OP_SEL_SHIFT_OFFS,
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 179/219] net: hns3: add Asym Pause support to fix autoneg problem
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Yonglong Liu, Peng Li, Huazhong Tan, David S . Miller,
Sasha Levin, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Yonglong Liu <liuyonglong@huawei.com>
[ Upstream commit bc3781edcea017aa1a29abd953b776cdba298ce2 ]
Local device and link partner config auto-negotiation on both,
local device config pause frame use as: rx on/tx off,
link partner config pause frame use as: rx off/tx on.
We except the result is:
Local device:
Autonegotiate: on
RX: on
TX: off
RX negotiated: on
TX negotiated: off
Link partner:
Autonegotiate: on
RX: off
TX: on
RX negotiated: off
TX negotiated: on
But actually, the result of Local device and link partner is both:
Autonegotiate: on
RX: off
TX: off
RX negotiated: off
TX negotiated: off
The root cause is that the supported flag is has only Pause,
reference to the function genphy_config_advert():
static int genphy_config_advert(struct phy_device *phydev)
{
...
linkmode_and(phydev->advertising, phydev->advertising,
phydev->supported);
...
}
The pause frame use of link partner is rx off/tx on, so its
advertising only set the bit Asym_Pause, and the supported is
only set the bit Pause, so the result of linkmode_and(), is
rx off/tx off.
This patch adds Asym_Pause to the supported flag to fix it.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 +
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 7 +++++++
2 files changed, 8 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 563eefa20003..14d37c26196b 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -889,6 +889,7 @@ static void hclge_parse_copper_link_mode(struct hclge_dev *hdev,
linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_TP_BIT, supported);
linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, supported);
+ linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, supported);
}
static void hclge_parse_link_mode(struct hclge_dev *hdev, u8 speed_ability)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 48eda2c6fdae..71a6f7c734b6 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
@@ -215,6 +215,13 @@ int hclge_mac_connect_phy(struct hnae3_handle *handle)
linkmode_and(phydev->supported, phydev->supported, mask);
linkmode_copy(phydev->advertising, phydev->supported);
+ /* supported flag is Pause and Asym Pause, but default advertising
+ * should be rx on, tx on, so need clear Asym Pause in advertising
+ * flag
+ */
+ linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+ phydev->advertising);
+
return 0;
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 185/219] bnxt_en: Disable bus master during PCI shutdown and driver unload.
From: Sasha Levin @ 2019-07-15 14:03 UTC (permalink / raw)
To: linux-kernel, stable; +Cc: Michael Chan, David S . Miller, Sasha Levin, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Michael Chan <michael.chan@broadcom.com>
[ Upstream commit c20dc142dd7b2884b8570eeab323bcd4a84294fa ]
Some chips with older firmware can continue to perform DMA read from
context memory even after the memory has been freed. In the PCI shutdown
method, we need to call pci_disable_device() to shutdown DMA to prevent
this DMA before we put the device into D3hot. DMA memory request in
D3hot state will generate PCI fatal error. Similarly, in the driver
remove method, the context memory should only be freed after DMA has
been shutdown for correctness.
Fixes: 98f04cf0f1fc ("bnxt_en: Check context memory requirements from firmware.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 30cafe4cdb6e..bf1fd513fa02 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -10165,10 +10165,10 @@ static void bnxt_remove_one(struct pci_dev *pdev)
bnxt_dcb_free(bp);
kfree(bp->edev);
bp->edev = NULL;
+ bnxt_cleanup_pci(bp);
bnxt_free_ctx_mem(bp);
kfree(bp->ctx);
bp->ctx = NULL;
- bnxt_cleanup_pci(bp);
bnxt_free_port_stats(bp);
free_netdev(dev);
}
@@ -10730,6 +10730,7 @@ static void bnxt_shutdown(struct pci_dev *pdev)
if (system_state == SYSTEM_POWER_OFF) {
bnxt_clear_int_mode(bp);
+ pci_disable_device(pdev);
pci_wake_from_d3(pdev, bp->wol);
pci_set_power_state(pdev, PCI_D3hot);
}
--
2.20.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox