* [PATCH AUTOSEL 5.2 107/249] net: hns3: delay ring buffer clearing during reset
From: Sasha Levin @ 2019-07-15 13:44 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Yunsheng Lin, Peng Li, Huazhong Tan, David S . Miller,
Sasha Levin, netdev
In-Reply-To: <20190715134655.4076-1-sashal@kernel.org>
From: Yunsheng Lin <linyunsheng@huawei.com>
[ Upstream commit 3a30964a2eef6aabd3ab18b979ea0eacf1147731 ]
The driver may not be able to disable the ring through firmware
when downing the netdev during reset process, which may cause
hardware accessing freed buffer problem.
This patch delays the ring buffer clearing to reset uninit
process because hardware will not access the ring buffer after
hardware reset is completed.
Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/ethernet/hisilicon/hns3/hns3_enet.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
index d18ad7b48a31..e0d3e2f9801d 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
@@ -28,7 +28,7 @@
#define hns3_tx_bd_count(S) DIV_ROUND_UP(S, HNS3_MAX_BD_SIZE)
static void hns3_clear_all_ring(struct hnae3_handle *h);
-static void hns3_force_clear_all_rx_ring(struct hnae3_handle *h);
+static void hns3_force_clear_all_ring(struct hnae3_handle *h);
static void hns3_remove_hw_addr(struct net_device *netdev);
static const char hns3_driver_name[] = "hns3";
@@ -491,7 +491,12 @@ static void hns3_nic_net_down(struct net_device *netdev)
/* free irq resources */
hns3_nic_uninit_irq(priv);
- hns3_clear_all_ring(priv->ae_handle);
+ /* delay ring buffer clearing to hns3_reset_notify_uninit_enet
+ * during reset process, because driver may not be able
+ * to disable the ring through firmware when downing the netdev.
+ */
+ if (!hns3_nic_resetting(netdev))
+ hns3_clear_all_ring(priv->ae_handle);
}
static int hns3_nic_net_stop(struct net_device *netdev)
@@ -3883,7 +3888,7 @@ static void hns3_client_uninit(struct hnae3_handle *handle, bool reset)
hns3_del_all_fd_rules(netdev, true);
- hns3_force_clear_all_rx_ring(handle);
+ hns3_force_clear_all_ring(handle);
hns3_uninit_phy(netdev);
@@ -4055,7 +4060,7 @@ static void hns3_force_clear_rx_ring(struct hns3_enet_ring *ring)
}
}
-static void hns3_force_clear_all_rx_ring(struct hnae3_handle *h)
+static void hns3_force_clear_all_ring(struct hnae3_handle *h)
{
struct net_device *ndev = h->kinfo.netdev;
struct hns3_nic_priv *priv = netdev_priv(ndev);
@@ -4063,6 +4068,9 @@ static void hns3_force_clear_all_rx_ring(struct hnae3_handle *h)
u32 i;
for (i = 0; i < h->kinfo.num_tqps; i++) {
+ ring = priv->ring_data[i].ring;
+ hns3_clear_tx_ring(ring);
+
ring = priv->ring_data[i + h->kinfo.num_tqps].ring;
hns3_force_clear_rx_ring(ring);
}
@@ -4297,7 +4305,8 @@ static int hns3_reset_notify_uninit_enet(struct hnae3_handle *handle)
return 0;
}
- hns3_force_clear_all_rx_ring(handle);
+ hns3_clear_all_ring(handle);
+ hns3_force_clear_all_ring(handle);
hns3_nic_uninit_vector_data(priv);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.2 119/249] vhost_net: disable zerocopy by default
From: Sasha Levin @ 2019-07-15 13:44 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jason Wang, Michael S . Tsirkin, David S . Miller, Sasha Levin,
kvm, virtualization, netdev
In-Reply-To: <20190715134655.4076-1-sashal@kernel.org>
From: Jason Wang <jasowang@redhat.com>
[ Upstream commit 098eadce3c622c07b328d0a43dda379b38cf7c5e ]
Vhost_net was known to suffer from HOL[1] issues which is not easy to
fix. Several downstream disable the feature by default. What's more,
the datapath was split and datacopy path got the support of batching
and XDP support recently which makes it faster than zerocopy part for
small packets transmission.
It looks to me that disable zerocopy by default is more
appropriate. It cold be enabled by default again in the future if we
fix the above issues.
[1] https://patchwork.kernel.org/patch/3787671/
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/vhost/net.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index d57ebdd616d9..247e5585af5d 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -35,7 +35,7 @@
#include "vhost.h"
-static int experimental_zcopytx = 1;
+static int experimental_zcopytx = 0;
module_param(experimental_zcopytx, int, 0444);
MODULE_PARM_DESC(experimental_zcopytx, "Enable Zero Copy TX;"
" 1 -Enable; 0 - Disable");
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.2 156/249] net: stmmac: sun8i: force select external PHY when no internal one
From: Sasha Levin @ 2019-07-15 13:45 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Icenowy Zheng, Ondrej Jirman, David S . Miller, Sasha Levin,
netdev
In-Reply-To: <20190715134655.4076-1-sashal@kernel.org>
From: Icenowy Zheng <icenowy@aosc.io>
[ Upstream commit 0fec7e72ae1391bb2d7527efb54fe6ae88acabce ]
The PHY selection bit also exists on SoCs without an internal PHY; if it's
set to 1 (internal PHY, default value) then the MAC will not make use of
any PHY on such SoCs.
This problem appears when adapting for H6, which has no real internal PHY
(the "internal PHY" on H6 is not on-die, but on a co-packaged AC200 chip,
connected via RMII interface at GPIO bank A).
Force the PHY selection bit to 0 when the SOC doesn't have an internal PHY,
to address the problem of a wrong default value.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index a69c34f605b1..98a15ba8be9f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -884,6 +884,11 @@ static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv)
* address. No need to mask it again.
*/
reg |= 1 << H3_EPHY_ADDR_SHIFT;
+ } else {
+ /* For SoCs without internal PHY the PHY selection bit should be
+ * set to 0 (external PHY).
+ */
+ reg &= ~H3_EPHY_SELECT;
}
if (!of_property_read_u32(node, "allwinner,tx-delay-ps", &val)) {
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.2 162/249] mt76: mt7615: do not process rx packets if the device is not initialized
From: Sasha Levin @ 2019-07-15 13:45 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Lorenzo Bianconi, Felix Fietkau, Sasha Levin, linux-wireless,
netdev
In-Reply-To: <20190715134655.4076-1-sashal@kernel.org>
From: Lorenzo Bianconi <lorenzo@kernel.org>
[ Upstream commit 2dcb79cde6129d948a237ef7b48a73a0c82f1e01 ]
Fix following crash that occurs when the driver is processing rx packets
while the device is not initialized yet
$ rmmod mt7615e
[ 67.210261] mt7615e 0000:01:00.0: Message -239 (seq 2) timeout
$ modprobe mt7615e
[ 72.406937] bus=0x1, slot = 0x0, irq=0x16
[ 72.436590] CPU 0 Unable to handle kernel paging request at virtual address 00000004, epc == 8eec4240, ra == 8eec41e0
[ 72.450291] mt7615e 0000:01:00.0: Firmware is not ready for download
[ 72.457724] Oops[#1]:
[ 72.470494] mt7615e: probe of 0000:01:00.0 failed with error -5
[ 72.474829] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.114 #0
[ 72.498702] task: 805769e0 task.stack: 80564000
[ 72.507709] $ 0 : 00000000 00000001 00000000 00000001
[ 72.518106] $ 4 : 8f704dbc 00000000 00000000 8f7046c0
[ 72.528500] $ 8 : 00000024 8045e98c 81210008 11000000
[ 72.538895] $12 : 8fc09f60 00000008 00000019 00000033
[ 72.549289] $16 : 8f704d80 e00000ff 8f0c7800 3c182406
[ 72.559684] $20 : 00000006 8ee615a0 4e000108 00000000
[ 72.570078] $24 : 0000004c 8000cf94
[ 72.580474] $28 : 80564000 8fc09e38 00000001 8eec41e0
[ 72.590869] Hi : 00000001
[ 72.596582] Lo : 00000000
[ 72.602319] epc : 8eec4240 mt7615_mac_fill_rx+0xac/0x494 [mt7615e]
[ 72.614953] ra : 8eec41e0 mt7615_mac_fill_rx+0x4c/0x494 [mt7615e]
[ 72.627580] Status: 11008403 KERNEL EXL IE
[ 72.635899] Cause : 40800008 (ExcCode 02)
[ 72.643860] BadVA : 00000004
[ 72.649573] PrId : 0001992f (MIPS 1004Kc)
[ 72.657704] Modules linked in: mt7615e pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_mu]
[ 72.792717] Process swapper/0 (pid: 0, threadinfo=80564000, task=805769e0, tls=00000000)
[ 72.808799] Stack : 8f0c7800 00000800 8f0c7800 8032b874 00000000 40000000 8f704d80 8ee615a0
[ 72.825428] 8dc88010 00000001 8ee615e0 8eec09b0 8dc88010 8032b914 8f3aee80 80567d20
[ 72.842055] 00000000 8ee615e0 40000000 8f0c7800 00000108 8eec9944 00000000 00000000
[ 72.858682] 80508f10 80510000 00000001 80567d20 8ee615a0 00000000 00000000 8ee61c00
[ 72.875308] 8ee61c40 00000040 80610000 80580000 00000000 8ee615dc 8ee61a68 00000001
[ 72.891936] ...
[ 72.896793] Call Trace:
[ 72.901649] [<8eec4240>] mt7615_mac_fill_rx+0xac/0x494 [mt7615e]
[ 72.913602] [<8eec09b0>] mt7615_queue_rx_skb+0xe4/0x12c [mt7615e]
[ 72.925734] [<8eec9944>] mt76_dma_cleanup+0x390/0x42c [mt76]
[ 72.936988] Code: ae020018 8ea20004 24030001 <94420004> a602002a 8ea20004 90420000 14430003 a2020034
[ 72.956390]
[ 72.959676] ---[ end trace f176967739edb19f ]---
Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index b8f48d10f27a..a27bc6791aa7 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -96,6 +96,9 @@ int mt7615_mac_fill_rx(struct mt7615_dev *dev, struct sk_buff *skb)
bool unicast, remove_pad, insert_ccmp_hdr = false;
int i, idx;
+ if (!test_bit(MT76_STATE_RUNNING, &dev->mt76.state))
+ return -EINVAL;
+
memset(status, 0, sizeof(*status));
unicast = (rxd1 & MT_RXD1_NORMAL_ADDR_TYPE) == MT_RXD1_NORMAL_U2M;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.2 164/249] ath10k: fix fw crash by moving chip reset after napi disabled
From: Sasha Levin @ 2019-07-15 13:45 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Miaoqing Pan, Kalle Valo, Sasha Levin, ath10k, linux-wireless,
netdev
In-Reply-To: <20190715134655.4076-1-sashal@kernel.org>
From: Miaoqing Pan <miaoqing@codeaurora.org>
[ Upstream commit 08d80e4cd27ba19f9bee9e5f788f9a9fc440a22f ]
On SMP platform, when continuously running wifi up/down, the napi
poll can be scheduled during chip reset, which will call
ath10k_pci_has_fw_crashed() to check the fw status. But in the reset
period, the value from FW_INDICATOR_ADDRESS register will return
0xdeadbeef, which also be treated as fw crash. Fix the issue by
moving chip reset after napi disabled.
ath10k_pci 0000:01:00.0: firmware crashed! (guid 73b30611-5b1e-4bdd-90b4-64c81eb947b6)
ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1
ath10k_pci 0000:01:00.0: failed to get memcpy hi address for firmware address 4: -16
ath10k_pci 0000:01:00.0: failed to read firmware dump area: -16
ath10k_pci 0000:01:00.0: Copy Engine register dump:
ath10k_pci 0000:01:00.0: [00]: 0x0004a000 0 0 0 0
ath10k_pci 0000:01:00.0: [01]: 0x0004a400 0 0 0 0
ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0 0 0
ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0 0 0 0
ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0 0 0 0
ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0 0 0 0
ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0 0 0 0
ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1 0 1 0
ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0 0 0
ath10k_pci 0000:01:00.0: [09]: 0x0004c400 0 0 0 0
ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0 0 0 0
ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0 0 0 0
Tested HW: QCA9984,QCA9887,WCN3990
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/pci.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 2c27f407a851..6e5f7ae00253 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -2059,6 +2059,11 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot hif stop\n");
+ ath10k_pci_irq_disable(ar);
+ ath10k_pci_irq_sync(ar);
+ napi_synchronize(&ar->napi);
+ napi_disable(&ar->napi);
+
/* Most likely the device has HTT Rx ring configured. The only way to
* prevent the device from accessing (and possible corrupting) host
* memory is to reset the chip now.
@@ -2072,10 +2077,6 @@ static void ath10k_pci_hif_stop(struct ath10k *ar)
*/
ath10k_pci_safe_chip_reset(ar);
- ath10k_pci_irq_disable(ar);
- ath10k_pci_irq_sync(ar);
- napi_synchronize(&ar->napi);
- napi_disable(&ar->napi);
ath10k_pci_flush(ar);
spin_lock_irqsave(&ar_pci->ps_lock, flags);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.2 165/249] ath10k: fix PCIE device wake up failed
From: Sasha Levin @ 2019-07-15 13:45 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Miaoqing Pan, Kalle Valo, Sasha Levin, ath10k, linux-wireless,
netdev
In-Reply-To: <20190715134655.4076-1-sashal@kernel.org>
From: Miaoqing Pan <miaoqing@codeaurora.org>
[ Upstream commit 011d4111c8c602ea829fa4917af1818eb0500a90 ]
Observed PCIE device wake up failed after ~120 iterations of
soft-reboot test. The error message is
"ath10k_pci 0000:01:00.0: failed to wake up device : -110"
The call trace as below:
ath10k_pci_probe -> ath10k_pci_force_wake -> ath10k_pci_wake_wait ->
ath10k_pci_is_awake
Once trigger the device to wake up, we will continuously check the RTC
state until it returns RTC_STATE_V_ON or timeout.
But for QCA99x0 chips, we use wrong value for RTC_STATE_V_ON.
Occasionally, we get 0x7 on the fist read, we thought as a failure
case, but actually is the right value, also verified with the spec.
So fix the issue by changing RTC_STATE_V_ON from 0x5 to 0x7, passed
~2000 iterations.
Tested HW: QCA9984
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/hw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/hw.c b/drivers/net/wireless/ath/ath10k/hw.c
index ad082b7d7643..b242085c3c16 100644
--- a/drivers/net/wireless/ath/ath10k/hw.c
+++ b/drivers/net/wireless/ath/ath10k/hw.c
@@ -158,7 +158,7 @@ const struct ath10k_hw_values qca6174_values = {
};
const struct ath10k_hw_values qca99x0_values = {
- .rtc_state_val_on = 5,
+ .rtc_state_val_on = 7,
.ce_count = 12,
.msi_assign_ce_max = 12,
.num_target_ce_config_wlan = 10,
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.2 174/249] netfilter: ctnetlink: Fix regression in conntrack entry deletion
From: Sasha Levin @ 2019-07-15 13:45 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Felix Kaechele, Pablo Neira Ayuso, Sasha Levin, netfilter-devel,
coreteam, netdev
In-Reply-To: <20190715134655.4076-1-sashal@kernel.org>
From: Felix Kaechele <felix@kaechele.ca>
[ Upstream commit e7600865db32b69deb0109b8254244dca592adcf ]
Commit f8e608982022 ("netfilter: ctnetlink: Resolve conntrack
L3-protocol flush regression") introduced a regression in which deletion
of conntrack entries would fail because the L3 protocol information
is replaced by AF_UNSPEC. As a result the search for the entry to be
deleted would turn up empty due to the tuple used to perform the search
is now different from the tuple used to initially set up the entry.
For flushing the conntrack table we do however want to keep the option
for nfgenmsg->version to have a non-zero value to allow for newer
user-space tools to request treatment under the new behavior. With that
it is possible to independently flush tables for a defined L3 protocol.
This was introduced with the enhancements in in commit 59c08c69c278
("netfilter: ctnetlink: Support L3 protocol-filter on flush").
Older user-space tools will retain the behavior of flushing all tables
regardless of defined L3 protocol.
Fixes: f8e608982022 ("netfilter: ctnetlink: Resolve conntrack L3-protocol flush regression")
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Felix Kaechele <felix@kaechele.ca>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/netfilter/nf_conntrack_netlink.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 7db79c1b8084..1b77444d5b52 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -1256,7 +1256,6 @@ static int ctnetlink_del_conntrack(struct net *net, struct sock *ctnl,
struct nf_conntrack_tuple tuple;
struct nf_conn *ct;
struct nfgenmsg *nfmsg = nlmsg_data(nlh);
- u_int8_t u3 = nfmsg->version ? nfmsg->nfgen_family : AF_UNSPEC;
struct nf_conntrack_zone zone;
int err;
@@ -1266,11 +1265,13 @@ static int ctnetlink_del_conntrack(struct net *net, struct sock *ctnl,
if (cda[CTA_TUPLE_ORIG])
err = ctnetlink_parse_tuple(cda, &tuple, CTA_TUPLE_ORIG,
- u3, &zone);
+ nfmsg->nfgen_family, &zone);
else if (cda[CTA_TUPLE_REPLY])
err = ctnetlink_parse_tuple(cda, &tuple, CTA_TUPLE_REPLY,
- u3, &zone);
+ nfmsg->nfgen_family, &zone);
else {
+ u_int8_t u3 = nfmsg->version ? nfmsg->nfgen_family : AF_UNSPEC;
+
return ctnetlink_flush_conntrack(net, cda,
NETLINK_CB(skb).portid,
nlmsg_report(nlh), u3);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.2 175/249] xsk: Properly terminate assignment in xskq_produce_flush_desc
From: Sasha Levin @ 2019-07-15 13:45 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Nathan Chancellor, Nick Desaulniers, Jonathan Lemon,
Björn Töpel, Song Liu, Daniel Borkmann, Sasha Levin,
netdev, bpf, xdp-newbies, clang-built-linux
In-Reply-To: <20190715134655.4076-1-sashal@kernel.org>
From: Nathan Chancellor <natechancellor@gmail.com>
[ Upstream commit f7019b7b0ad14bde732b8953161994edfc384953 ]
Clang warns:
In file included from net/xdp/xsk_queue.c:10:
net/xdp/xsk_queue.h:292:2: warning: expression result unused
[-Wunused-value]
WRITE_ONCE(q->ring->producer, q->prod_tail);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/compiler.h:284:6: note: expanded from macro 'WRITE_ONCE'
__u.__val; \
~~~ ^~~~~
1 warning generated.
The q->prod_tail assignment has a comma at the end, not a semi-colon.
Fix that so clang no longer warns and everything works as expected.
Fixes: c497176cb2e4 ("xsk: add Rx receive functions and poll support")
Link: https://github.com/ClangBuiltLinux/linux/issues/544
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/xdp/xsk_queue.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/xdp/xsk_queue.h b/net/xdp/xsk_queue.h
index 88b9ae24658d..cba4a640d5e8 100644
--- a/net/xdp/xsk_queue.h
+++ b/net/xdp/xsk_queue.h
@@ -288,7 +288,7 @@ static inline void xskq_produce_flush_desc(struct xsk_queue *q)
/* Order producer and data */
smp_wmb(); /* B, matches C */
- q->prod_tail = q->prod_head,
+ q->prod_tail = q->prod_head;
WRITE_ONCE(q->ring->producer, q->prod_tail);
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.2 177/249] bpf: fix BPF_ALU32 | BPF_ARSH on BE arches
From: Sasha Levin @ 2019-07-15 13:45 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jiong Wang, Yauheni Kaliuta, Jakub Kicinski, Quentin Monnet,
Song Liu, Daniel Borkmann, Sasha Levin, netdev, bpf
In-Reply-To: <20190715134655.4076-1-sashal@kernel.org>
From: Jiong Wang <jiong.wang@netronome.com>
[ Upstream commit 75672dda27bd00109a84cd975c17949ad9c45663 ]
Yauheni reported the following code do not work correctly on BE arches:
ALU_ARSH_X:
DST = (u64) (u32) ((*(s32 *) &DST) >> SRC);
CONT;
ALU_ARSH_K:
DST = (u64) (u32) ((*(s32 *) &DST) >> IMM);
CONT;
and are causing failure of test_verifier test 'arsh32 on imm 2' on BE
arches.
The code is taking address and interpreting memory directly, so is not
endianness neutral. We should instead perform standard C type casting on
the variable. A u64 to s32 conversion will drop the high 32-bit and reserve
the low 32-bit as signed integer, this is all we want.
Fixes: 2dc6b100f928 ("bpf: interpreter support BPF_ALU | BPF_ARSH")
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
kernel/bpf/core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c
index 080e2bb644cc..f2148db91439 100644
--- a/kernel/bpf/core.c
+++ b/kernel/bpf/core.c
@@ -1364,10 +1364,10 @@ static u64 ___bpf_prog_run(u64 *regs, const struct bpf_insn *insn, u64 *stack)
insn++;
CONT;
ALU_ARSH_X:
- DST = (u64) (u32) ((*(s32 *) &DST) >> SRC);
+ DST = (u64) (u32) (((s32) DST) >> SRC);
CONT;
ALU_ARSH_K:
- DST = (u64) (u32) ((*(s32 *) &DST) >> IMM);
+ DST = (u64) (u32) (((s32) DST) >> IMM);
CONT;
ALU64_ARSH_X:
(*(s64 *) &DST) >>= SRC;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.2 181/249] net/mlx5: Get vport ACL namespace by vport index
From: Sasha Levin @ 2019-07-15 13:45 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jianbo Liu, Oz Shlomo, Eli Britstein, Roi Dayan, Mark Bloch,
Saeed Mahameed, Sasha Levin, netdev, linux-rdma
In-Reply-To: <20190715134655.4076-1-sashal@kernel.org>
From: Jianbo Liu <jianbol@mellanox.com>
[ Upstream commit f53297d67800feb5fafd94abd926c889aefee690 ]
The ingress and egress ACL root namespaces are created per vport and
stored into arrays. However, the vport number is not the same as the
index. Passing the array index, instead of vport number, to get the
correct ingress and egress acl namespace.
Fixes: 9b93ab981e3b ("net/mlx5: Separate ingress/egress namespaces for each vport")
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
index 6a921e24cd5e..acab26b88261 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
@@ -939,7 +939,7 @@ int esw_vport_enable_egress_acl(struct mlx5_eswitch *esw,
vport->vport, MLX5_CAP_ESW_EGRESS_ACL(dev, log_max_ft_size));
root_ns = mlx5_get_flow_vport_acl_namespace(dev, MLX5_FLOW_NAMESPACE_ESW_EGRESS,
- vport->vport);
+ mlx5_eswitch_vport_num_to_index(esw, vport->vport));
if (!root_ns) {
esw_warn(dev, "Failed to get E-Switch egress flow namespace for vport (%d)\n", vport->vport);
return -EOPNOTSUPP;
@@ -1057,7 +1057,7 @@ int esw_vport_enable_ingress_acl(struct mlx5_eswitch *esw,
vport->vport, MLX5_CAP_ESW_INGRESS_ACL(dev, log_max_ft_size));
root_ns = mlx5_get_flow_vport_acl_namespace(dev, MLX5_FLOW_NAMESPACE_ESW_INGRESS,
- vport->vport);
+ mlx5_eswitch_vport_num_to_index(esw, vport->vport));
if (!root_ns) {
esw_warn(dev, "Failed to get E-Switch ingress flow namespace for vport (%d)\n", vport->vport);
return -EOPNOTSUPP;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.2 182/249] ixgbe: Check DDM existence in transceiver before access
From: Sasha Levin @ 2019-07-15 13:45 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Mauro S. M. Rodrigues, Jesse Brandeburg, Andrew Bowers,
Jeff Kirsher, Sasha Levin, netdev
In-Reply-To: <20190715134655.4076-1-sashal@kernel.org>
From: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
[ Upstream commit 655c91414579d7bb115a4f7898ee726fc18e0984 ]
Some transceivers may comply with SFF-8472 but not implement the Digital
Diagnostic Monitoring (DDM) interface described in it. The existence of
such area is specified by bit 6 of byte 92, set to 1 if implemented.
Currently, due to not checking this bit ixgbe fails trying to read SFP
module's eeprom with the follow message:
ethtool -m enP51p1s0f0
Cannot get Module EEPROM data: Input/output error
Because it fails to read the additional 256 bytes in which it was assumed
to exist the DDM data.
This issue was noticed using a Mellanox Passive DAC PN 01FT738. The eeprom
data was confirmed by Mellanox as correct and present in other Passive
DACs in from other manufacturers.
Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 3 ++-
drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
index acba067cc15a..7c52ae8ac005 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c
@@ -3226,7 +3226,8 @@ static int ixgbe_get_module_info(struct net_device *dev,
page_swap = true;
}
- if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap) {
+ if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap ||
+ !(addr_mode & IXGBE_SFF_DDM_IMPLEMENTED)) {
/* We have a SFP, but it does not support SFF-8472 */
modinfo->type = ETH_MODULE_SFF_8079;
modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
index 214b01085718..6544c4539c0d 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h
@@ -45,6 +45,7 @@
#define IXGBE_SFF_SOFT_RS_SELECT_10G 0x8
#define IXGBE_SFF_SOFT_RS_SELECT_1G 0x0
#define IXGBE_SFF_ADDRESSING_MODE 0x4
+#define IXGBE_SFF_DDM_IMPLEMENTED 0x40
#define IXGBE_SFF_QSFP_DA_ACTIVE_CABLE 0x1
#define IXGBE_SFF_QSFP_DA_PASSIVE_CABLE 0x8
#define IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE 0x23
--
2.20.1
^ permalink raw reply related
* [PATCH] ISDN: hfcsusb: checking idx of ep configuration
From: Phong Tran @ 2019-07-15 15:08 UTC (permalink / raw)
To: syzbot+8750abbc3a46ef47d509
Cc: isdn, davem, gregkh, andreyknvl, bigeasy, gustavo, pakki001,
linux-kernel, linux-usb, syzkaller-bugs, netdev,
linux-kernel-mentees, skhan, Phong Tran
In-Reply-To: <000000000000f2b23d05868310f9@google.com>
The syzbot test with random endpoint address which made the idx is
overflow in the table of endpoint configuations.
this adds the checking for fixing the error report from
syzbot
KASAN: stack-out-of-bounds Read in hfcsusb_probe [1]
The patch tested by syzbot [2]
Reported-by: syzbot+8750abbc3a46ef47d509@syzkaller.appspotmail.com
[1]:
https://syzkaller.appspot.com/bug?id=30a04378dac680c5d521304a00a86156bb913522
[2]:
https://groups.google.com/d/msg/syzkaller-bugs/_6HBdge8F3E/OJn7wVNpBAAJ
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
---
drivers/isdn/hardware/mISDN/hfcsusb.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c
index 4c99739b937e..0e224232f746 100644
--- a/drivers/isdn/hardware/mISDN/hfcsusb.c
+++ b/drivers/isdn/hardware/mISDN/hfcsusb.c
@@ -1955,6 +1955,9 @@ hfcsusb_probe(struct usb_interface *intf, const struct usb_device_id *id)
/* get endpoint base */
idx = ((ep_addr & 0x7f) - 1) * 2;
+ if (idx > 15)
+ return -EIO;
+
if (ep_addr & 0x80)
idx++;
attr = ep->desc.bmAttributes;
--
2.11.0
^ permalink raw reply related
* [PATCH AUTOSEL 5.2 186/249] ath9k: correctly handle short radar pulses
From: Sasha Levin @ 2019-07-15 13:45 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Zefir Kurtisi, Kalle Valo, Sasha Levin, linux-wireless, netdev
In-Reply-To: <20190715134655.4076-1-sashal@kernel.org>
From: Zefir Kurtisi <zefir.kurtisi@neratec.com>
[ Upstream commit df5c4150501ee7e86383be88f6490d970adcf157 ]
In commit 3c0efb745a17 ("ath9k: discard undersized packets")
the lower bound of RX packets was set to 10 (min ACK size) to
filter those that would otherwise be treated as invalid at
mac80211.
Alas, short radar pulses are reported as PHY_ERROR frames
with length set to 3. Therefore their detection stopped
working after that commit.
NOTE: ath9k drivers built thereafter will not pass DFS
certification.
This extends the criteria for short packets to explicitly
handle PHY_ERROR frames.
Fixes: 3c0efb745a17 ("ath9k: discard undersized packets")
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath9k/recv.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 4e97f7f3b2a3..06e660858766 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -815,6 +815,7 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_hdr *hdr;
bool discard_current = sc->rx.discard_next;
+ bool is_phyerr;
/*
* Discard corrupt descriptors which are marked in
@@ -827,8 +828,11 @@ static int ath9k_rx_skb_preprocess(struct ath_softc *sc,
/*
* Discard zero-length packets and packets smaller than an ACK
+ * which are not PHY_ERROR (short radar pulses have a length of 3)
*/
- if (rx_stats->rs_datalen < 10) {
+ is_phyerr = rx_stats->rs_status & ATH9K_RXERR_PHY;
+ if (!rx_stats->rs_datalen ||
+ (rx_stats->rs_datalen < 10 && !is_phyerr)) {
RX_STAT_INC(sc, rx_len_err);
goto corrupt;
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.2 187/249] wil6210: drop old event after wmi_call timeout
From: Sasha Levin @ 2019-07-15 13:45 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Ahmad Masri, Maya Erez, Kalle Valo, Sasha Levin, linux-wireless,
wil6210, netdev
In-Reply-To: <20190715134655.4076-1-sashal@kernel.org>
From: Ahmad Masri <amasri@codeaurora.org>
[ Upstream commit 1a276003111c0404f6bfeffe924c5a21f482428b ]
This change fixes a rare race condition of handling WMI events after
wmi_call expires.
wmi_recv_cmd immediately handles an event when reply_buf is defined and
a wmi_call is waiting for the event.
However, in case the wmi_call has already timed-out, there will be no
waiting/running wmi_call and the event will be queued in WMI queue and
will be handled later in wmi_event_handle.
Meanwhile, a new similar wmi_call for the same command and event may
be issued. In this case, when handling the queued event we got WARN_ON
printed.
Fixing this case as a valid timeout and drop the unexpected event.
Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/wil6210/wmi.c | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index d89cd41e78ac..89a75ff29410 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -3220,7 +3220,18 @@ static void wmi_event_handle(struct wil6210_priv *wil,
/* check if someone waits for this event */
if (wil->reply_id && wil->reply_id == id &&
wil->reply_mid == mid) {
- WARN_ON(wil->reply_buf);
+ if (wil->reply_buf) {
+ /* event received while wmi_call is waiting
+ * with a buffer. Such event should be handled
+ * in wmi_recv_cmd function. Handling the event
+ * here means a previous wmi_call was timeout.
+ * Drop the event and do not handle it.
+ */
+ wil_err(wil,
+ "Old event (%d, %s) while wmi_call is waiting. Drop it and Continue waiting\n",
+ id, eventid2name(id));
+ return;
+ }
wmi_evt_call_handler(vif, id, evt_data,
len - sizeof(*wmi));
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.2 206/249] net: ethernet: ti: cpsw: Assign OF node to slave devices
From: Sasha Levin @ 2019-07-15 13:46 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Marek Vasut, David S . Miller, Ivan Khoronzhuk, Sasha Levin,
linux-omap, netdev
In-Reply-To: <20190715134655.4076-1-sashal@kernel.org>
From: Marek Vasut <marex@denx.de>
[ Upstream commit 337d1727a3895775b5e5ef67d3ca0fea2e2ae768 ]
Assign OF node to CPSW slave devices, otherwise it is not possible to
bind e.g. DSA switch to them. Without this patch, the DSA code tries
to find the ethernet device by OF match, but fails to do so because
the slave device has NULL OF node.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/ti/cpsw.c | 3 +++
drivers/net/ethernet/ti/cpsw_priv.h | 1 +
2 files changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 634fc484a0b3..4e3026f9abed 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -2179,6 +2179,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
return ret;
}
+ slave_data->slave_node = slave_node;
slave_data->phy_node = of_parse_phandle(slave_node,
"phy-handle", 0);
parp = of_get_property(slave_node, "phy_id", &lenp);
@@ -2330,6 +2331,7 @@ static int cpsw_probe_dual_emac(struct cpsw_priv *priv)
/* register the network device */
SET_NETDEV_DEV(ndev, cpsw->dev);
+ ndev->dev.of_node = cpsw->slaves[1].data->slave_node;
ret = register_netdev(ndev);
if (ret)
dev_err(cpsw->dev, "cpsw: error registering net device\n");
@@ -2507,6 +2509,7 @@ static int cpsw_probe(struct platform_device *pdev)
/* register the network device */
SET_NETDEV_DEV(ndev, dev);
+ ndev->dev.of_node = cpsw->slaves[0].data->slave_node;
ret = register_netdev(ndev);
if (ret) {
dev_err(dev, "error registering net device\n");
diff --git a/drivers/net/ethernet/ti/cpsw_priv.h b/drivers/net/ethernet/ti/cpsw_priv.h
index 04795b97ee71..e32f11da2dce 100644
--- a/drivers/net/ethernet/ti/cpsw_priv.h
+++ b/drivers/net/ethernet/ti/cpsw_priv.h
@@ -272,6 +272,7 @@ struct cpsw_host_regs {
};
struct cpsw_slave_data {
+ struct device_node *slave_node;
struct device_node *phy_node;
char phy_id[MII_BUS_ID_SIZE];
int phy_if;
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.2 233/249] net: hns3: fix port capbility updating issue
From: Sasha Levin @ 2019-07-15 13:46 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jian Shen, Peng Li, Huazhong Tan, David S . Miller, Sasha Levin,
netdev
In-Reply-To: <20190715134655.4076-1-sashal@kernel.org>
From: Jian Shen <shenjian15@huawei.com>
[ Upstream commit 49b1255603de5183c5e377200be3b3afe0dcdb86 ]
Currently, the driver queries the media port information, and
updates the port capability periodically. But it sets an error
mac->speed_type value, which stops update port capability.
Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index bab04d2d674a..f2bffc05e902 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -2592,6 +2592,7 @@ static int hclge_get_sfp_info(struct hclge_dev *hdev, struct hclge_mac *mac)
mac->speed_ability = le32_to_cpu(resp->speed_ability);
mac->autoneg = resp->autoneg;
mac->support_autoneg = resp->autoneg_ability;
+ mac->speed_type = QUERY_ACTIVE_SPEED;
if (!resp->active_fec)
mac->fec_mode = 0;
else
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.2 237/249] Bluetooth: 6lowpan: search for destination address in all peers
From: Sasha Levin @ 2019-07-15 13:46 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Josua Mayer, Jukka Rissanen, Michael Scott, Marcel Holtmann,
Sasha Levin, linux-bluetooth, netdev
In-Reply-To: <20190715134655.4076-1-sashal@kernel.org>
From: Josua Mayer <josua.mayer@jm0.eu>
[ Upstream commit b188b03270b7f8568fc714101ce82fbf5e811c5a ]
Handle overlooked case where the target address is assigned to a peer
and neither route nor gateway exist.
For one peer, no checks are performed to see if it is meant to receive
packets for a given address.
As soon as there is a second peer however, checks are performed
to deal with routes and gateways for handling complex setups with
multiple hops to a target address.
This logic assumed that no route and no gateway imply that the
destination address can not be reached, which is false in case of a
direct peer.
Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tested-by: Michael Scott <mike@foundries.io>
Signed-off-by: Josua Mayer <josua.mayer@jm0.eu>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
net/bluetooth/6lowpan.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c
index 1555b0c6f7ec..9001bf331d56 100644
--- a/net/bluetooth/6lowpan.c
+++ b/net/bluetooth/6lowpan.c
@@ -180,10 +180,16 @@ static inline struct lowpan_peer *peer_lookup_dst(struct lowpan_btle_dev *dev,
}
if (!rt) {
- nexthop = &lowpan_cb(skb)->gw;
-
- if (ipv6_addr_any(nexthop))
- return NULL;
+ if (ipv6_addr_any(&lowpan_cb(skb)->gw)) {
+ /* There is neither route nor gateway,
+ * probably the destination is a direct peer.
+ */
+ nexthop = daddr;
+ } else {
+ /* There is a known gateway
+ */
+ nexthop = &lowpan_cb(skb)->gw;
+ }
} else {
nexthop = rt6_nexthop(rt, daddr);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 001/219] ath10k: Check tx_stats before use it
From: Sasha Levin @ 2019-07-15 14:00 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Yingying Tang, Kalle Valo, Sasha Levin, ath10k, linux-wireless,
netdev
From: Yingying Tang <yintang@codeaurora.org>
[ Upstream commit 9e7251fa38978b85108c44743e1436d48e8d0d76 ]
tx_stats will be freed and set to NULL before debugfs_sta node is
removed in station disconnetion process. So if read the debugfs_sta
node there may be NULL pointer error. Add check for tx_stats before
use it to resove this issue.
Signed-off-by: Yingying Tang <yintang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/debugfs_sta.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/debugfs_sta.c b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
index c704ae371c4d..42931a669b02 100644
--- a/drivers/net/wireless/ath/ath10k/debugfs_sta.c
+++ b/drivers/net/wireless/ath/ath10k/debugfs_sta.c
@@ -663,6 +663,13 @@ static ssize_t ath10k_dbg_sta_dump_tx_stats(struct file *file,
mutex_lock(&ar->conf_mutex);
+ if (!arsta->tx_stats) {
+ ath10k_warn(ar, "failed to get tx stats");
+ mutex_unlock(&ar->conf_mutex);
+ kfree(buf);
+ return 0;
+ }
+
spin_lock_bh(&ar->data_lock);
for (k = 0; k < ATH10K_STATS_TYPE_MAX; k++) {
for (j = 0; j < ATH10K_COUNTER_TYPE_MAX; j++) {
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 006/219] ath10k: Do not send probe response template for mesh
From: Sasha Levin @ 2019-07-15 14:00 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Surabhi Vishnoi, Kalle Valo, Sasha Levin, ath10k, linux-wireless,
netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Surabhi Vishnoi <svishnoi@codeaurora.org>
[ Upstream commit 97354f2c432788e3163134df6bb144f4b6289d87 ]
Currently mac80211 do not support probe response template for
mesh point. When WMI_SERVICE_BEACON_OFFLOAD is enabled, host
driver tries to configure probe response template for mesh, but
it fails because the interface type is not NL80211_IFTYPE_AP but
NL80211_IFTYPE_MESH_POINT.
To avoid this failure, skip sending probe response template to
firmware for mesh point.
Tested HW: WCN3990/QCA6174/QCA9984
Signed-off-by: Surabhi Vishnoi <svishnoi@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/mac.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index e8997e22ceec..b500fd427595 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -1630,6 +1630,10 @@ static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)
if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
return 0;
+ /* For mesh, probe response and beacon share the same template */
+ if (ieee80211_vif_is_mesh(vif))
+ return 0;
+
prb = ieee80211_proberesp_get(hw, vif);
if (!prb) {
ath10k_warn(ar, "failed to get probe resp template from mac80211\n");
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 008/219] ath9k: Check for errors when reading SREV register
From: Sasha Levin @ 2019-07-15 14:00 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Tim Schumacher, Kalle Valo, Sasha Levin, linux-wireless, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Tim Schumacher <timschumi@gmx.de>
[ Upstream commit 2f90c7e5d09437a4d8d5546feaae9f1cf48cfbe1 ]
Right now, if an error is encountered during the SREV register
read (i.e. an EIO in ath9k_regread()), that error code gets
passed all the way to __ath9k_hw_init(), where it is visible
during the "Chip rev not supported" message.
ath9k_htc 1-1.4:1.0: ath9k_htc: HTC initialized with 33 credits
ath: phy2: Mac Chip Rev 0x0f.3 is not supported by this driver
ath: phy2: Unable to initialize hardware; initialization status: -95
ath: phy2: Unable to initialize hardware; initialization status: -95
ath9k_htc: Failed to initialize the device
Check for -EIO explicitly in ath9k_hw_read_revisions() and return
a boolean based on the success of the operation. Check for that in
__ath9k_hw_init() and abort with a more debugging-friendly message
if reading the revisions wasn't successful.
ath9k_htc 1-1.4:1.0: ath9k_htc: HTC initialized with 33 credits
ath: phy2: Failed to read SREV register
ath: phy2: Could not read hardware revision
ath: phy2: Unable to initialize hardware; initialization status: -95
ath: phy2: Unable to initialize hardware; initialization status: -95
ath9k_htc: Failed to initialize the device
This helps when debugging by directly showing the first point of
failure and it could prevent possible errors if a 0x0f.3 revision
is ever supported.
Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath9k/hw.c | 32 +++++++++++++++++++++--------
1 file changed, 23 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index 8581d917635a..b6773d613f0c 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -252,8 +252,9 @@ void ath9k_hw_get_channel_centers(struct ath_hw *ah,
/* Chip Revisions */
/******************/
-static void ath9k_hw_read_revisions(struct ath_hw *ah)
+static bool ath9k_hw_read_revisions(struct ath_hw *ah)
{
+ u32 srev;
u32 val;
if (ah->get_mac_revision)
@@ -269,25 +270,33 @@ static void ath9k_hw_read_revisions(struct ath_hw *ah)
val = REG_READ(ah, AR_SREV);
ah->hw_version.macRev = MS(val, AR_SREV_REVISION2);
}
- return;
+ return true;
case AR9300_DEVID_AR9340:
ah->hw_version.macVersion = AR_SREV_VERSION_9340;
- return;
+ return true;
case AR9300_DEVID_QCA955X:
ah->hw_version.macVersion = AR_SREV_VERSION_9550;
- return;
+ return true;
case AR9300_DEVID_AR953X:
ah->hw_version.macVersion = AR_SREV_VERSION_9531;
- return;
+ return true;
case AR9300_DEVID_QCA956X:
ah->hw_version.macVersion = AR_SREV_VERSION_9561;
- return;
+ return true;
}
- val = REG_READ(ah, AR_SREV) & AR_SREV_ID;
+ srev = REG_READ(ah, AR_SREV);
+
+ if (srev == -EIO) {
+ ath_err(ath9k_hw_common(ah),
+ "Failed to read SREV register");
+ return false;
+ }
+
+ val = srev & AR_SREV_ID;
if (val == 0xFF) {
- val = REG_READ(ah, AR_SREV);
+ val = srev;
ah->hw_version.macVersion =
(val & AR_SREV_VERSION2) >> AR_SREV_TYPE2_S;
ah->hw_version.macRev = MS(val, AR_SREV_REVISION2);
@@ -306,6 +315,8 @@ static void ath9k_hw_read_revisions(struct ath_hw *ah)
if (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCIE)
ah->is_pciexpress = true;
}
+
+ return true;
}
/************************************/
@@ -559,7 +570,10 @@ static int __ath9k_hw_init(struct ath_hw *ah)
struct ath_common *common = ath9k_hw_common(ah);
int r = 0;
- ath9k_hw_read_revisions(ah);
+ if (!ath9k_hw_read_revisions(ah)) {
+ ath_err(common, "Could not read hardware revisions");
+ return -EOPNOTSUPP;
+ }
switch (ah->hw_version.macVersion) {
case AR_SREV_VERSION_5416_PCI:
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 010/219] wil6210: fix missed MISC mbox interrupt
From: Sasha Levin @ 2019-07-15 14:00 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Maya Erez, Kalle Valo, Sasha Levin, linux-wireless, wil6210,
netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Maya Erez <merez@codeaurora.org>
[ Upstream commit 7441be71ba7e07791fd4fa2b07c932dff14ff4d9 ]
When MISC interrupt is triggered due to HALP bit, in parallel
to mbox events handling by the MISC threaded IRQ, new mbox
interrupt can be missed in the following scenario:
1. MISC ICR is read in the IRQ handler
2. Threaded IRQ is completed and all MISC interrupts are unmasked
3. mbox interrupt is set by FW
4. HALP is masked
The mbox interrupt in step 3 can be missed due to constant high level
of ICM.
Masking all MISC IRQs instead of masking only HALP bit in step 4
will guarantee that ICM will drop to 0 and interrupt will be triggered
once MISC interrupts will be unmasked.
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/wil6210/interrupt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index 3f5bd177d55f..e41ba24011d8 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -580,7 +580,7 @@ static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
/* no need to handle HALP ICRs until next vote */
wil->halp.handle_icr = false;
wil_dbg_irq(wil, "irq_misc: HALP IRQ invoked\n");
- wil6210_mask_halp(wil);
+ wil6210_mask_irq_misc(wil, true);
complete(&wil->halp.comp);
}
}
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 015/219] ath: DFS JP domain W56 fixed pulse type 3 RADAR detection
From: Sasha Levin @ 2019-07-15 14:00 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Anilkumar Kolli, Tamizh chelvam, Kalle Valo, Sasha Levin,
linux-wireless, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Anilkumar Kolli <akolli@codeaurora.org>
[ Upstream commit d8792393a783158cbb2c39939cb897dc5e5299b6 ]
Increase pulse width range from 1-2usec to 0-4usec.
During data traffic HW occasionally fails detecting radar pulses,
so that SW cannot get enough radar reports to achieve the success rate.
Tested ath10k hw and fw:
* QCA9888(10.4-3.5.1-00052)
* QCA4019(10.4-3.2.1.1-00017)
* QCA9984(10.4-3.6-00104)
* QCA988X(10.2.4-1.0-00041)
Tested ath9k hw: AR9300
Tested-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/dfs_pattern_detector.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/dfs_pattern_detector.c b/drivers/net/wireless/ath/dfs_pattern_detector.c
index d52b31b45df7..a274eb0d1968 100644
--- a/drivers/net/wireless/ath/dfs_pattern_detector.c
+++ b/drivers/net/wireless/ath/dfs_pattern_detector.c
@@ -111,7 +111,7 @@ static const struct radar_detector_specs jp_radar_ref_types[] = {
JP_PATTERN(0, 0, 1, 1428, 1428, 1, 18, 29, false),
JP_PATTERN(1, 2, 3, 3846, 3846, 1, 18, 29, false),
JP_PATTERN(2, 0, 1, 1388, 1388, 1, 18, 50, false),
- JP_PATTERN(3, 1, 2, 4000, 4000, 1, 18, 50, false),
+ JP_PATTERN(3, 0, 4, 4000, 4000, 1, 18, 50, false),
JP_PATTERN(4, 0, 5, 150, 230, 1, 23, 50, false),
JP_PATTERN(5, 6, 10, 200, 500, 1, 16, 50, false),
JP_PATTERN(6, 11, 20, 200, 500, 1, 12, 50, false),
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 016/219] ath10k: Fix encoding for protected management frames
From: Sasha Levin @ 2019-07-15 14:00 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Rakesh Pillai, Kalle Valo, Sasha Levin, ath10k, linux-wireless,
netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Rakesh Pillai <pillair@codeaurora.org>
[ Upstream commit 42f1bc43e6a97b9ddbe976eba9bd05306c990c75 ]
Currently the protected management frames are
not appended with the MIC_LEN which results in
the protected management frames being encoded
incorrectly.
Add the extra space at the end of the protected
management frames to fix this encoding error for
the protected management frames.
Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1
Fixes: 1807da49733e ("ath10k: wmi: add management tx by reference support over wmi")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 582fb11f648a..02709fc99034 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -2840,8 +2840,10 @@ ath10k_wmi_tlv_op_gen_mgmt_tx_send(struct ath10k *ar, struct sk_buff *msdu,
if ((ieee80211_is_action(hdr->frame_control) ||
ieee80211_is_deauth(hdr->frame_control) ||
ieee80211_is_disassoc(hdr->frame_control)) &&
- ieee80211_has_protected(hdr->frame_control))
+ ieee80211_has_protected(hdr->frame_control)) {
+ skb_put(msdu, IEEE80211_CCMP_MIC_LEN);
buf_len += IEEE80211_CCMP_MIC_LEN;
+ }
buf_len = min_t(u32, buf_len, WMI_TLV_MGMT_TX_FRAME_MAX_LEN);
buf_len = round_up(buf_len, 4);
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 028/219] net: stmmac: dwmac1000: Clear unused address entries
From: Sasha Levin @ 2019-07-15 14:00 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jose Abreu, Jose Abreu, Joao Pinto, David S . Miller,
Giuseppe Cavallaro, Alexandre Torgue, Sasha Levin, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Jose Abreu <Jose.Abreu@synopsys.com>
[ Upstream commit 9463c445590091202659cdfdd44b236acadfbd84 ]
In case we don't use a given address entry we need to clear it because
it could contain previous values that are no longer valid.
Found out while running stmmac selftests.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
index 0877bde6e860..21d131347e2e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c
@@ -216,6 +216,12 @@ static void dwmac1000_set_filter(struct mac_device_info *hw,
GMAC_ADDR_LOW(reg));
reg++;
}
+
+ while (reg <= perfect_addr_number) {
+ writel(0, ioaddr + GMAC_ADDR_HIGH(reg));
+ writel(0, ioaddr + GMAC_ADDR_LOW(reg));
+ reg++;
+ }
}
#ifdef FRAME_FILTER_DEBUG
--
2.20.1
^ permalink raw reply related
* [PATCH AUTOSEL 5.1 029/219] net: stmmac: dwmac4/5: Clear unused address entries
From: Sasha Levin @ 2019-07-15 14:00 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Jose Abreu, Jose Abreu, Joao Pinto, David S . Miller,
Giuseppe Cavallaro, Alexandre Torgue, Sasha Levin, netdev
In-Reply-To: <20190715140341.6443-1-sashal@kernel.org>
From: Jose Abreu <Jose.Abreu@synopsys.com>
[ Upstream commit 0620ec6c62a5a07625b65f699adc5d1b90394ee6 ]
In case we don't use a given address entry we need to clear it because
it could contain previous values that are no longer valid.
Found out while running stmmac selftests.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
index 7e5d5db0d516..a2f3db39221e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
@@ -444,14 +444,20 @@ static void dwmac4_set_filter(struct mac_device_info *hw,
* are required
*/
value |= GMAC_PACKET_FILTER_PR;
- } else if (!netdev_uc_empty(dev)) {
- int reg = 1;
+ } else {
struct netdev_hw_addr *ha;
+ int reg = 1;
netdev_for_each_uc_addr(ha, dev) {
dwmac4_set_umac_addr(hw, ha->addr, reg);
reg++;
}
+
+ while (reg <= GMAC_MAX_PERFECT_ADDRESSES) {
+ writel(0, ioaddr + GMAC_ADDR_HIGH(reg));
+ writel(0, ioaddr + GMAC_ADDR_LOW(reg));
+ reg++;
+ }
}
writel(value, ioaddr + GMAC_PACKET_FILTER);
--
2.20.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox