* Re: [PATCH] net/mlx5: fix a -Wstringop-truncation warning
From: Saeed Mahameed @ 2019-08-26 20:18 UTC (permalink / raw)
To: cai@lca.pw, davem@davemloft.net
Cc: Eran Ben Elisha, linux-kernel@vger.kernel.org,
linux-rdma@vger.kernel.org, netdev@vger.kernel.org, Feras Daoud,
leon@kernel.org, Moshe Shemesh
In-Reply-To: <20190823.151809.442664848668672070.davem@davemloft.net>
On Fri, 2019-08-23 at 15:18 -0700, David Miller wrote:
> Saeed, I assume I'll get this from you.
Yes, i will handle it.
^ permalink raw reply
* Re: [net-next 4/8] net/mlx5e: Add device out of buffer counter
From: Jakub Kicinski @ 2019-08-26 20:39 UTC (permalink / raw)
To: Saeed Mahameed; +Cc: davem@davemloft.net, netdev@vger.kernel.org, Moshe Shemesh
In-Reply-To: <18abb6456fb4a2fba52f6f77373ac351651a62c6.camel@mellanox.com>
On Mon, 26 Aug 2019 20:14:47 +0000, Saeed Mahameed wrote:
> > I see thanks for the explanation and sorry for the delayed response.
> > Would it perhaps make sense to indicate the hairpin in the name?
>
> We had some internal discussion and we couldn't come up with the
> perfect name :)
>
> hairpin is just an implementation detail, we don't want to exclusively
> bind this counter to hairpin only flows, the problem is not with
> hairpin, the actual problem is due to the use of internal RQs, for now
> it only happens with "hairpin like" flows, but tomorrow it can happen
> with a different scenario but same root cause (the use of internal
> RQs), we want to have one counter to count internal drops due to
> internal use of internal RQs.
>
> so how about:
> dev_internal_rq_oob: Device Internal RQ out of buffer
> dev_internal_out_of_res: Device Internal out of resources (more generic
> ? too generic ?)
Maybe dev_internal_queue_oob? The use of 'internal' is a little
unfortunate, because it may be read as RQ run out of internal buffers.
Rather than special type of queue run out of buffers.
But not knowing the HW I don't really have any great suggestions :(
Either of the above would work as well.
> Any suggestion that you provide will be more than welcome.
>
> > dev_out_of_buffer is quite a generic name, and there seems to be no
> > doc, nor does the commit message explains it as well as you have..
>
> Regarding documentation:
> All mlx5 ethool counters are documented here
> https://community.mellanox.com/s/article/understanding-mlx5-linux-counters-and-status-parameters
>
> once we decide on the name, will add the new counter to the doc.
I see, thanks!
^ permalink raw reply
* [PATCH 1/4] mdev: Introduce sha1 based mdev alias
From: Parav Pandit @ 2019-08-26 20:41 UTC (permalink / raw)
To: alex.williamson, jiri, kwankhede, cohuck, davem
Cc: kvm, linux-kernel, netdev, Parav Pandit
In-Reply-To: <20190826204119.54386-1-parav@mellanox.com>
Whenever a parent requests to generate mdev alias, generate a mdev
alias.
It is an optional attribute that parent can request to generate
for each of its child mdev.
mdev alias is generated using sha1 from the mdev name.
Signed-off-by: Parav Pandit <parav@mellanox.com>
---
drivers/vfio/mdev/mdev_core.c | 98 +++++++++++++++++++++++++++++++-
drivers/vfio/mdev/mdev_private.h | 5 +-
drivers/vfio/mdev/mdev_sysfs.c | 13 +++--
include/linux/mdev.h | 4 ++
4 files changed, 111 insertions(+), 9 deletions(-)
diff --git a/drivers/vfio/mdev/mdev_core.c b/drivers/vfio/mdev/mdev_core.c
index b558d4cfd082..e825ff38b037 100644
--- a/drivers/vfio/mdev/mdev_core.c
+++ b/drivers/vfio/mdev/mdev_core.c
@@ -10,9 +10,11 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/slab.h>
+#include <linux/mm.h>
#include <linux/uuid.h>
#include <linux/sysfs.h>
#include <linux/mdev.h>
+#include <crypto/hash.h>
#include "mdev_private.h"
@@ -27,6 +29,8 @@ static struct class_compat *mdev_bus_compat_class;
static LIST_HEAD(mdev_list);
static DEFINE_MUTEX(mdev_list_lock);
+static struct crypto_shash *alias_hash;
+
struct device *mdev_parent_dev(struct mdev_device *mdev)
{
return mdev->parent->dev;
@@ -164,6 +168,18 @@ int mdev_register_device(struct device *dev, const struct mdev_parent_ops *ops)
goto add_dev_err;
}
+ if (ops->get_alias_length) {
+ unsigned int digest_size;
+ unsigned int aligned_len;
+
+ aligned_len = roundup(ops->get_alias_length(), 2);
+ digest_size = crypto_shash_digestsize(alias_hash);
+ if (aligned_len / 2 > digest_size) {
+ ret = -EINVAL;
+ goto add_dev_err;
+ }
+ }
+
parent = kzalloc(sizeof(*parent), GFP_KERNEL);
if (!parent) {
ret = -ENOMEM;
@@ -259,6 +275,7 @@ static void mdev_device_free(struct mdev_device *mdev)
mutex_unlock(&mdev_list_lock);
dev_dbg(&mdev->dev, "MDEV: destroying\n");
+ kvfree(mdev->alias);
kfree(mdev);
}
@@ -269,18 +286,86 @@ static void mdev_device_release(struct device *dev)
mdev_device_free(mdev);
}
-int mdev_device_create(struct kobject *kobj,
- struct device *dev, const guid_t *uuid)
+static const char *
+generate_alias(const char *uuid, unsigned int max_alias_len)
+{
+ struct shash_desc *hash_desc;
+ unsigned int digest_size;
+ unsigned char *digest;
+ unsigned int alias_len;
+ char *alias;
+ int ret = 0;
+
+ /* Align to multiple of 2 as bin2hex will generate
+ * even number of bytes.
+ */
+ alias_len = roundup(max_alias_len, 2);
+ alias = kvzalloc(alias_len + 1, GFP_KERNEL);
+ if (!alias)
+ return NULL;
+
+ /* Allocate and init descriptor */
+ hash_desc = kvzalloc(sizeof(*hash_desc) +
+ crypto_shash_descsize(alias_hash),
+ GFP_KERNEL);
+ if (!hash_desc)
+ goto desc_err;
+
+ hash_desc->tfm = alias_hash;
+
+ digest_size = crypto_shash_digestsize(alias_hash);
+
+ digest = kvzalloc(digest_size, GFP_KERNEL);
+ if (!digest) {
+ ret = -ENOMEM;
+ goto digest_err;
+ }
+ crypto_shash_init(hash_desc);
+ crypto_shash_update(hash_desc, uuid, UUID_STRING_LEN);
+ crypto_shash_final(hash_desc, digest);
+ bin2hex(&alias[0], digest,
+ min_t(unsigned int, digest_size, alias_len / 2));
+ /* When alias length is odd, zero out and additional last byte
+ * that bin2hex has copied.
+ */
+ if (max_alias_len % 2)
+ alias[max_alias_len] = 0;
+
+ kvfree(digest);
+ kvfree(hash_desc);
+ return alias;
+
+digest_err:
+ kvfree(hash_desc);
+desc_err:
+ kvfree(alias);
+ return NULL;
+}
+
+int mdev_device_create(struct kobject *kobj, struct device *dev,
+ const char *uuid_str, const guid_t *uuid)
{
int ret;
struct mdev_device *mdev, *tmp;
struct mdev_parent *parent;
struct mdev_type *type = to_mdev_type(kobj);
+ unsigned int alias_len = 0;
+ const char *alias = NULL;
parent = mdev_get_parent(type->parent);
if (!parent)
return -EINVAL;
+ if (parent->ops->get_alias_length)
+ alias_len = parent->ops->get_alias_length();
+ if (alias_len) {
+ alias = generate_alias(uuid_str, alias_len);
+ if (!alias) {
+ ret = -ENOMEM;
+ goto alias_fail;
+ }
+ }
+
mutex_lock(&mdev_list_lock);
/* Check for duplicate */
@@ -300,6 +385,8 @@ int mdev_device_create(struct kobject *kobj,
}
guid_copy(&mdev->uuid, uuid);
+ mdev->alias = alias;
+ alias = NULL;
list_add(&mdev->next, &mdev_list);
mutex_unlock(&mdev_list_lock);
@@ -346,6 +433,8 @@ int mdev_device_create(struct kobject *kobj,
up_read(&parent->unreg_sem);
put_device(&mdev->dev);
mdev_fail:
+ kvfree(alias);
+alias_fail:
mdev_put_parent(parent);
return ret;
}
@@ -406,6 +495,10 @@ EXPORT_SYMBOL(mdev_get_iommu_device);
static int __init mdev_init(void)
{
+ alias_hash = crypto_alloc_shash("sha1", 0, 0);
+ if (!alias_hash)
+ return -ENOMEM;
+
return mdev_bus_register();
}
@@ -415,6 +508,7 @@ static void __exit mdev_exit(void)
class_compat_unregister(mdev_bus_compat_class);
mdev_bus_unregister();
+ crypto_free_shash(alias_hash);
}
module_init(mdev_init)
diff --git a/drivers/vfio/mdev/mdev_private.h b/drivers/vfio/mdev/mdev_private.h
index 7d922950caaf..cf1c0d9842c6 100644
--- a/drivers/vfio/mdev/mdev_private.h
+++ b/drivers/vfio/mdev/mdev_private.h
@@ -33,6 +33,7 @@ struct mdev_device {
struct kobject *type_kobj;
struct device *iommu_device;
bool active;
+ const char *alias;
};
#define to_mdev_device(dev) container_of(dev, struct mdev_device, dev)
@@ -57,8 +58,8 @@ void parent_remove_sysfs_files(struct mdev_parent *parent);
int mdev_create_sysfs_files(struct device *dev, struct mdev_type *type);
void mdev_remove_sysfs_files(struct device *dev, struct mdev_type *type);
-int mdev_device_create(struct kobject *kobj,
- struct device *dev, const guid_t *uuid);
+int mdev_device_create(struct kobject *kobj, struct device *dev,
+ const char *uuid_str, const guid_t *uuid);
int mdev_device_remove(struct device *dev);
#endif /* MDEV_PRIVATE_H */
diff --git a/drivers/vfio/mdev/mdev_sysfs.c b/drivers/vfio/mdev/mdev_sysfs.c
index 7570c7602ab4..43afe0e80b76 100644
--- a/drivers/vfio/mdev/mdev_sysfs.c
+++ b/drivers/vfio/mdev/mdev_sysfs.c
@@ -63,15 +63,18 @@ static ssize_t create_store(struct kobject *kobj, struct device *dev,
return -ENOMEM;
ret = guid_parse(str, &uuid);
- kfree(str);
if (ret)
- return ret;
+ goto err;
- ret = mdev_device_create(kobj, dev, &uuid);
+ ret = mdev_device_create(kobj, dev, str, &uuid);
if (ret)
- return ret;
+ goto err;
- return count;
+ ret = count;
+
+err:
+ kfree(str);
+ return ret;
}
MDEV_TYPE_ATTR_WO(create);
diff --git a/include/linux/mdev.h b/include/linux/mdev.h
index 0ce30ca78db0..f036fe9854ee 100644
--- a/include/linux/mdev.h
+++ b/include/linux/mdev.h
@@ -72,6 +72,9 @@ struct device *mdev_get_iommu_device(struct device *dev);
* @mmap: mmap callback
* @mdev: mediated device structure
* @vma: vma structure
+ * @get_alias_length: Generate alias for the mdevs of this parent based on the
+ * mdev device name when it returns non zero alias length.
+ * It is optional.
* Parent device that support mediated device should be registered with mdev
* module with mdev_parent_ops structure.
**/
@@ -92,6 +95,7 @@ struct mdev_parent_ops {
long (*ioctl)(struct mdev_device *mdev, unsigned int cmd,
unsigned long arg);
int (*mmap)(struct mdev_device *mdev, struct vm_area_struct *vma);
+ unsigned int (*get_alias_length)(void);
};
/* interface for exporting mdev supported type attributes */
--
2.19.2
^ permalink raw reply related
* [PATCH 4/4] mtty: Optionally support mtty alias
From: Parav Pandit @ 2019-08-26 20:41 UTC (permalink / raw)
To: alex.williamson, jiri, kwankhede, cohuck, davem
Cc: kvm, linux-kernel, netdev, Parav Pandit
In-Reply-To: <20190826204119.54386-1-parav@mellanox.com>
Provide a module parameter to set alias length to optionally generate
mdev alias.
Example to request mdev alias.
$ modprobe mtty alias_length=12
Signed-off-by: Parav Pandit <parav@mellanox.com>
---
samples/vfio-mdev/mtty.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/samples/vfio-mdev/mtty.c b/samples/vfio-mdev/mtty.c
index 92e770a06ea2..92208245b057 100644
--- a/samples/vfio-mdev/mtty.c
+++ b/samples/vfio-mdev/mtty.c
@@ -1410,6 +1410,15 @@ static struct attribute_group *mdev_type_groups[] = {
NULL,
};
+static unsigned int mtty_alias_length;
+module_param_named(alias_length, mtty_alias_length, uint, 0444);
+MODULE_PARM_DESC(alias_length, "mdev alias length; default=0");
+
+static unsigned int mtty_get_alias_length(void)
+{
+ return mtty_alias_length;
+}
+
static const struct mdev_parent_ops mdev_fops = {
.owner = THIS_MODULE,
.dev_attr_groups = mtty_dev_groups,
@@ -1422,6 +1431,7 @@ static const struct mdev_parent_ops mdev_fops = {
.read = mtty_read,
.write = mtty_write,
.ioctl = mtty_ioctl,
+ .get_alias_length = mtty_get_alias_length
};
static void mtty_device_release(struct device *dev)
--
2.19.2
^ permalink raw reply related
* [PATCH 3/4] mdev: Expose mdev alias in sysfs tree
From: Parav Pandit @ 2019-08-26 20:41 UTC (permalink / raw)
To: alex.williamson, jiri, kwankhede, cohuck, davem
Cc: kvm, linux-kernel, netdev, Parav Pandit
In-Reply-To: <20190826204119.54386-1-parav@mellanox.com>
Expose mdev alias as string in a sysfs tree so that such attribute can
be used to generate netdevice name by systemd/udev or can be used to
match other kernel objects based on the alias of the mdev.
Signed-off-by: Parav Pandit <parav@mellanox.com>
---
drivers/vfio/mdev/mdev_sysfs.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/vfio/mdev/mdev_sysfs.c b/drivers/vfio/mdev/mdev_sysfs.c
index 43afe0e80b76..59f4e3cc5233 100644
--- a/drivers/vfio/mdev/mdev_sysfs.c
+++ b/drivers/vfio/mdev/mdev_sysfs.c
@@ -246,7 +246,20 @@ static ssize_t remove_store(struct device *dev, struct device_attribute *attr,
static DEVICE_ATTR_WO(remove);
+static ssize_t alias_show(struct device *device,
+ struct device_attribute *attr, char *buf)
+{
+ struct mdev_device *dev = mdev_from_dev(device);
+
+ if (!dev->alias)
+ return -EOPNOTSUPP;
+
+ return sprintf(buf, "%s\n", dev->alias);
+}
+static DEVICE_ATTR_RO(alias);
+
static const struct attribute *mdev_device_attrs[] = {
+ &dev_attr_alias.attr,
&dev_attr_remove.attr,
NULL,
};
--
2.19.2
^ permalink raw reply related
* [PATCH 0/4] Introduce variable length mdev alias
From: Parav Pandit @ 2019-08-26 20:41 UTC (permalink / raw)
To: alex.williamson, jiri, kwankhede, cohuck, davem
Cc: kvm, linux-kernel, netdev, Parav Pandit
To have consistent naming for the netdevice of a mdev and to have
consistent naming of the devlink port [1] of a mdev, which is formed using
phys_port_name of the devlink port, current UUID is not usable because
UUID is too long.
UUID in string format is 36-characters long and in binary 128-bit.
Both formats are not able to fit within 15 characters limit of netdev
name.
It is desired to have mdev device naming consistent using UUID.
So that widely used user space framework such as ovs [2] can make use
of mdev representor in similar way as PCIe SR-IOV VF and PF representors.
Hence,
(a) mdev alias is created which is derived using sha1 from the mdev name.
(b) Vendor driver describes how long an alias should be for the child mdev
created for a given parent.
(c) Mdev aliases are unique at system level.
(d) alias is created optionally whenever parent requested.
This ensures that non networking mdev parents can function without alias
creation overhead.
This design is discussed at [3].
An example systemd/udev extension will have,
1. netdev name created using mdev alias available in sysfs.
mdev UUID=83b8f4f2-509f-382f-3c1e-e6bfe0fa1001
mdev 12 character alias=cd5b146a80a5
netdev name of this mdev = enmcd5b146a80a5
Here en = Ethernet link
m = mediated device
2. devlink port phys_port_name created using mdev alias.
devlink phys_port_name=pcd5b146a80a5
This patchset enables mdev core to maintain unique alias for a mdev.
Patch-1 Introduces mdev alias using sha1.
Patch-2 Ensures that mdev alias is unique in a system.
Patch-3 Exposes mdev alias in a sysfs hirerchy.
Patch-4 Extends mtty driver to optionally provide alias generation.
This also enables to test UUID based sha1 collision and trigger
error handling for duplicate sha1 results.
In future when networking driver wants to use mdev alias, mdev_alias()
API will be added to derive devlink port name.
[1] http://man7.org/linux/man-pages/man8/devlink-port.8.html
[2] https://docs.openstack.org/os-vif/latest/user/plugins/ovs.html
[3] https://patchwork.kernel.org/cover/11084231/
Parav Pandit (4):
mdev: Introduce sha1 based mdev alias
mdev: Make mdev alias unique among all mdevs
mdev: Expose mdev alias in sysfs tree
mtty: Optionally support mtty alias
drivers/vfio/mdev/mdev_core.c | 103 ++++++++++++++++++++++++++++++-
drivers/vfio/mdev/mdev_private.h | 5 +-
drivers/vfio/mdev/mdev_sysfs.c | 26 ++++++--
include/linux/mdev.h | 4 ++
samples/vfio-mdev/mtty.c | 10 +++
5 files changed, 139 insertions(+), 9 deletions(-)
--
2.19.2
^ permalink raw reply
* [PATCH 2/4] mdev: Make mdev alias unique among all mdevs
From: Parav Pandit @ 2019-08-26 20:41 UTC (permalink / raw)
To: alex.williamson, jiri, kwankhede, cohuck, davem
Cc: kvm, linux-kernel, netdev, Parav Pandit
In-Reply-To: <20190826204119.54386-1-parav@mellanox.com>
Mdev alias should be unique among all the mdevs, so that when such alias
is used by the mdev users to derive other objects, there is no
collision in a given system.
Signed-off-by: Parav Pandit <parav@mellanox.com>
---
drivers/vfio/mdev/mdev_core.c | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/vfio/mdev/mdev_core.c b/drivers/vfio/mdev/mdev_core.c
index e825ff38b037..6eb37f0c6369 100644
--- a/drivers/vfio/mdev/mdev_core.c
+++ b/drivers/vfio/mdev/mdev_core.c
@@ -375,6 +375,11 @@ int mdev_device_create(struct kobject *kobj, struct device *dev,
ret = -EEXIST;
goto mdev_fail;
}
+ if (tmp->alias && strcmp(tmp->alias, alias) == 0) {
+ mutex_unlock(&mdev_list_lock);
+ ret = -EEXIST;
+ goto mdev_fail;
+ }
}
mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
--
2.19.2
^ permalink raw reply related
* [PATCH V2 net 1/2] openvswitch: Properly set L4 keys on "later" IP fragments
From: Greg Rose @ 2019-08-26 20:45 UTC (permalink / raw)
To: netdev, pshelar; +Cc: joe, Greg Rose
When IP fragments are reassembled before being sent to conntrack, the
key from the last fragment is used. Unless there are reordering
issues, the last fragment received will not contain the L4 ports, so the
key for the reassembled datagram won't contain them. This patch updates
the key once we have a reassembled datagram.
The handle_fragments() function works on L3 headers so we pull the L3/L4
flow key update code from key_extract into a new function
'key_extract_l3l4'. Then we add a another new function
ovs_flow_key_update_l3l4() and export it so that it is accessible by
handle_fragments() for conntrack packet reassembly.
Co-authored by: Justin Pettit <jpettit@ovn.org>
Signed-off-by: Greg Rose <gvrose8192@gmail.com>
---
net/openvswitch/conntrack.c | 5 ++
net/openvswitch/flow.c | 161 ++++++++++++++++++++++++++------------------
net/openvswitch/flow.h | 1 +
3 files changed, 101 insertions(+), 66 deletions(-)
diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c
index d8da647..05249eb 100644
--- a/net/openvswitch/conntrack.c
+++ b/net/openvswitch/conntrack.c
@@ -525,6 +525,11 @@ static int handle_fragments(struct net *net, struct sw_flow_key *key,
return -EPFNOSUPPORT;
}
+ /* The key extracted from the fragment that completed this datagram
+ * likely didn't have an L4 header, so regenerate it.
+ */
+ ovs_flow_key_update_l3l4(skb, key);
+
key->ip.frag = OVS_FRAG_TYPE_NONE;
skb_clear_hash(skb);
skb->ignore_df = 1;
diff --git a/net/openvswitch/flow.c b/net/openvswitch/flow.c
index bc89e16..ea12ee6 100644
--- a/net/openvswitch/flow.c
+++ b/net/openvswitch/flow.c
@@ -523,78 +523,15 @@ static int parse_nsh(struct sk_buff *skb, struct sw_flow_key *key)
}
/**
- * key_extract - extracts a flow key from an Ethernet frame.
+ * key_extract_l3l4 - extracts L3/L4 header information.
* @skb: sk_buff that contains the frame, with skb->data pointing to the
- * Ethernet header
+ * L3 header
* @key: output flow key
*
- * The caller must ensure that skb->len >= ETH_HLEN.
- *
- * Returns 0 if successful, otherwise a negative errno value.
- *
- * Initializes @skb header fields as follows:
- *
- * - skb->mac_header: the L2 header.
- *
- * - skb->network_header: just past the L2 header, or just past the
- * VLAN header, to the first byte of the L2 payload.
- *
- * - skb->transport_header: If key->eth.type is ETH_P_IP or ETH_P_IPV6
- * on output, then just past the IP header, if one is present and
- * of a correct length, otherwise the same as skb->network_header.
- * For other key->eth.type values it is left untouched.
- *
- * - skb->protocol: the type of the data starting at skb->network_header.
- * Equals to key->eth.type.
*/
-static int key_extract(struct sk_buff *skb, struct sw_flow_key *key)
+static int key_extract_l3l4(struct sk_buff *skb, struct sw_flow_key *key)
{
int error;
- struct ethhdr *eth;
-
- /* Flags are always used as part of stats */
- key->tp.flags = 0;
-
- skb_reset_mac_header(skb);
-
- /* Link layer. */
- clear_vlan(key);
- if (ovs_key_mac_proto(key) == MAC_PROTO_NONE) {
- if (unlikely(eth_type_vlan(skb->protocol)))
- return -EINVAL;
-
- skb_reset_network_header(skb);
- key->eth.type = skb->protocol;
- } else {
- eth = eth_hdr(skb);
- ether_addr_copy(key->eth.src, eth->h_source);
- ether_addr_copy(key->eth.dst, eth->h_dest);
-
- __skb_pull(skb, 2 * ETH_ALEN);
- /* We are going to push all headers that we pull, so no need to
- * update skb->csum here.
- */
-
- if (unlikely(parse_vlan(skb, key)))
- return -ENOMEM;
-
- key->eth.type = parse_ethertype(skb);
- if (unlikely(key->eth.type == htons(0)))
- return -ENOMEM;
-
- /* Multiple tagged packets need to retain TPID to satisfy
- * skb_vlan_pop(), which will later shift the ethertype into
- * skb->protocol.
- */
- if (key->eth.cvlan.tci & htons(VLAN_CFI_MASK))
- skb->protocol = key->eth.cvlan.tpid;
- else
- skb->protocol = key->eth.type;
-
- skb_reset_network_header(skb);
- __skb_push(skb, skb->data - skb_mac_header(skb));
- }
- skb_reset_mac_len(skb);
/* Network layer. */
if (key->eth.type == htons(ETH_P_IP)) {
@@ -788,6 +725,98 @@ static int key_extract(struct sk_buff *skb, struct sw_flow_key *key)
return 0;
}
+/**
+ * key_extract - extracts a flow key from an Ethernet frame.
+ * @skb: sk_buff that contains the frame, with skb->data pointing to the
+ * Ethernet header
+ * @key: output flow key
+ *
+ * The caller must ensure that skb->len >= ETH_HLEN.
+ *
+ * Returns 0 if successful, otherwise a negative errno value.
+ *
+ * Initializes @skb header fields as follows:
+ *
+ * - skb->mac_header: the L2 header.
+ *
+ * - skb->network_header: just past the L2 header, or just past the
+ * VLAN header, to the first byte of the L2 payload.
+ *
+ * - skb->transport_header: If key->eth.type is ETH_P_IP or ETH_P_IPV6
+ * on output, then just past the IP header, if one is present and
+ * of a correct length, otherwise the same as skb->network_header.
+ * For other key->eth.type values it is left untouched.
+ *
+ * - skb->protocol: the type of the data starting at skb->network_header.
+ * Equals to key->eth.type.
+ */
+static int key_extract(struct sk_buff *skb, struct sw_flow_key *key)
+{
+ struct ethhdr *eth;
+
+ /* Flags are always used as part of stats */
+ key->tp.flags = 0;
+
+ skb_reset_mac_header(skb);
+
+ /* Link layer. */
+ clear_vlan(key);
+ if (ovs_key_mac_proto(key) == MAC_PROTO_NONE) {
+ if (unlikely(eth_type_vlan(skb->protocol)))
+ return -EINVAL;
+
+ skb_reset_network_header(skb);
+ key->eth.type = skb->protocol;
+ } else {
+ eth = eth_hdr(skb);
+ ether_addr_copy(key->eth.src, eth->h_source);
+ ether_addr_copy(key->eth.dst, eth->h_dest);
+
+ __skb_pull(skb, 2 * ETH_ALEN);
+ /* We are going to push all headers that we pull, so no need to
+ * update skb->csum here.
+ */
+
+ if (unlikely(parse_vlan(skb, key)))
+ return -ENOMEM;
+
+ key->eth.type = parse_ethertype(skb);
+ if (unlikely(key->eth.type == htons(0)))
+ return -ENOMEM;
+
+ /* Multiple tagged packets need to retain TPID to satisfy
+ * skb_vlan_pop(), which will later shift the ethertype into
+ * skb->protocol.
+ */
+ if (key->eth.cvlan.tci & htons(VLAN_CFI_MASK))
+ skb->protocol = key->eth.cvlan.tpid;
+ else
+ skb->protocol = key->eth.type;
+
+ skb_reset_network_header(skb);
+ __skb_push(skb, skb->data - skb_mac_header(skb));
+ }
+
+ skb_reset_mac_len(skb);
+
+ /* Fill out L3/L4 key info, if any */
+ return key_extract_l3l4(skb, key);
+}
+
+/* In the case of conntrack fragment handling it expects L3 headers,
+ * add a helper.
+ */
+int ovs_flow_key_update_l3l4(struct sk_buff *skb, struct sw_flow_key *key)
+{
+ int res;
+
+ res = key_extract_l3l4(skb, key);
+ if (!res)
+ key->mac_proto &= ~SW_FLOW_KEY_INVALID;
+
+ return res;
+}
+
int ovs_flow_key_update(struct sk_buff *skb, struct sw_flow_key *key)
{
int res;
diff --git a/net/openvswitch/flow.h b/net/openvswitch/flow.h
index a5506e2..b830d5f 100644
--- a/net/openvswitch/flow.h
+++ b/net/openvswitch/flow.h
@@ -270,6 +270,7 @@ void ovs_flow_stats_get(const struct sw_flow *, struct ovs_flow_stats *,
u64 ovs_flow_used_time(unsigned long flow_jiffies);
int ovs_flow_key_update(struct sk_buff *skb, struct sw_flow_key *key);
+int ovs_flow_key_update_l3l4(struct sk_buff *skb, struct sw_flow_key *key);
int ovs_flow_key_extract(const struct ip_tunnel_info *tun_info,
struct sk_buff *skb,
struct sw_flow_key *key);
--
1.8.3.1
^ permalink raw reply related
* [PATCH V2 net 2/2] openvswitch: Clear the L4 portion of the key for "later" fragments.
From: Greg Rose @ 2019-08-26 20:45 UTC (permalink / raw)
To: netdev, pshelar; +Cc: joe, Justin Pettit
In-Reply-To: <1566852359-8028-1-git-send-email-gvrose8192@gmail.com>
From: Justin Pettit <jpettit@ovn.org>
Only the first fragment in a datagram contains the L4 headers. When the
Open vSwitch module parses a packet, it always sets the IP protocol
field in the key, but can only set the L4 fields on the first fragment.
The original behavior would not clear the L4 portion of the key, so
garbage values would be sent in the key for "later" fragments. This
patch clears the L4 fields in that circumstance to prevent sending those
garbage values as part of the upcall.
Signed-off-by: Justin Pettit <jpettit@ovn.org>
---
net/openvswitch/flow.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/net/openvswitch/flow.c b/net/openvswitch/flow.c
index ea12ee6..22fd55f 100644
--- a/net/openvswitch/flow.c
+++ b/net/openvswitch/flow.c
@@ -560,6 +560,7 @@ static int key_extract_l3l4(struct sk_buff *skb, struct sw_flow_key *key)
offset = nh->frag_off & htons(IP_OFFSET);
if (offset) {
key->ip.frag = OVS_FRAG_TYPE_LATER;
+ memset(&key->tp, 0, sizeof(key->tp));
return 0;
}
if (nh->frag_off & htons(IP_MF) ||
@@ -677,8 +678,10 @@ static int key_extract_l3l4(struct sk_buff *skb, struct sw_flow_key *key)
return error;
}
- if (key->ip.frag == OVS_FRAG_TYPE_LATER)
+ if (key->ip.frag == OVS_FRAG_TYPE_LATER) {
+ memset(&key->tp, 0, sizeof(key->tp));
return 0;
+ }
if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP)
key->ip.frag = OVS_FRAG_TYPE_FIRST;
--
1.8.3.1
^ permalink raw reply related
* [PATCH net-next] r8169: improve DMA handling in rtl_rx
From: Heiner Kallweit @ 2019-08-26 20:52 UTC (permalink / raw)
To: Realtek linux nic maintainers, David Miller; +Cc: netdev@vger.kernel.org
Move the call to dma_sync_single_for_cpu after calling napi_alloc_skb.
This avoids calling dma_sync_single_for_cpu w/o handing control back
to device if the memory allocation should fail.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
drivers/net/ethernet/realtek/r8169_main.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c
index 6182e7d33..faa4041cf 100644
--- a/drivers/net/ethernet/realtek/r8169_main.c
+++ b/drivers/net/ethernet/realtek/r8169_main.c
@@ -5807,16 +5807,15 @@ static int rtl_rx(struct net_device *dev, struct rtl8169_private *tp, u32 budget
goto release_descriptor;
}
- dma_sync_single_for_cpu(tp_to_dev(tp),
- le64_to_cpu(desc->addr),
- pkt_size, DMA_FROM_DEVICE);
-
skb = napi_alloc_skb(&tp->napi, pkt_size);
if (unlikely(!skb)) {
dev->stats.rx_dropped++;
goto release_descriptor;
}
+ dma_sync_single_for_cpu(tp_to_dev(tp),
+ le64_to_cpu(desc->addr),
+ pkt_size, DMA_FROM_DEVICE);
prefetch(rx_buf);
skb_copy_to_linear_data(skb, rx_buf, pkt_size);
skb->tail += pkt_size;
--
2.23.0
^ permalink raw reply related
* Re: [PATCH net v2 1/2] Revert "r8152: napi hangup fix after disconnect"
From: David Miller @ 2019-08-26 20:55 UTC (permalink / raw)
To: hayeswang; +Cc: jslaby, netdev, nic_swsd, linux-kernel
In-Reply-To: <0835B3720019904CB8F7AA43166CEEB2F18D6733@RTITMBSVM03.realtek.com.tw>
From: Hayes Wang <hayeswang@realtek.com>
Date: Mon, 26 Aug 2019 09:43:32 +0000
> Jiri Slaby [mailto:jslaby@suse.cz]
>> Sent: Monday, August 26, 2019 4:55 PM
> [...]
>> Could you clarify *why* it conflicts? And how is the problem fixed by
>> 0ee1f473496 avoided now?
>
> In rtl8152_disconnect(), the flow would be as following.
>
> static void rtl8152_disconnect(struct usb_interface *intf)
> {
> ...
> - netif_napi_del(&tp->napi);
> - unregister_netdev(tp->netdev);
> - rtl8152_close
> - napi_disable
>
> Therefore you add a checking of RTL8152_UNPLUG to avoid
> calling napi_disable() after netif_napi_del(). However,
> after commit ffa9fec30ca0 ("r8152: set RTL8152_UNPLUG
> only for real disconnection"), RTL8152_UNPLUG is not
> always set when calling rtl8152_disconnect(). That is,
> napi_disable() would be called after netif_napi_del(),
> if RTL8152_UNPLUG is not set.
>
> The best way is to avoid calling netif_napi_del() before
> calling unregister_netdev(). And I has submitted such
> patch following this one.
These details belong in the commit message, always.
^ permalink raw reply
* Re: [PATCH net-next v4 6/6] net: dsa: mv88e6xxx: fully support SERDES on Topaz family
From: David Miller @ 2019-08-26 21:04 UTC (permalink / raw)
To: andrew; +Cc: marek.behun, netdev, vivien.didelot, f.fainelli, olteanv
In-Reply-To: <20190826153830.GE2168@lunn.ch>
From: Andrew Lunn <andrew@lunn.ch>
Date: Mon, 26 Aug 2019 17:38:30 +0200
>> +static int mv88e6xxx_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
>> + phy_interface_t mode, bool allow_over_2500,
>> + bool make_cmode_writable)
>
> I don't like these two parameters. The caller of this function can do
> the check for allow_over_2500 and error out before calling this.
>
> Is make_cmode_writable something that could be done once at probe and
> then forgotten about? Or is it needed before every write? At least
> move it into the specific port_set_cmode() that requires it.
Please respin this series once these issues are sorted out.
Thanks.
^ permalink raw reply
* Re: [PATCH] net/mlx5: fix a -Wstringop-truncation warning
From: Saeed Mahameed @ 2019-08-26 21:11 UTC (permalink / raw)
To: cai@lca.pw
Cc: linux-rdma@vger.kernel.org, davem@davemloft.net, Moshe Shemesh,
Feras Daoud, linux-kernel@vger.kernel.org, Eran Ben Elisha,
netdev@vger.kernel.org, leon@kernel.org
In-Reply-To: <1566590183-9898-1-git-send-email-cai@lca.pw>
On Fri, 2019-08-23 at 15:56 -0400, Qian Cai wrote:
> In file included from ./arch/powerpc/include/asm/paca.h:15,
> from ./arch/powerpc/include/asm/current.h:13,
> from ./include/linux/thread_info.h:21,
> from ./include/asm-generic/preempt.h:5,
> from
> ./arch/powerpc/include/generated/asm/preempt.h:1,
> from ./include/linux/preempt.h:78,
> from ./include/linux/spinlock.h:51,
> from ./include/linux/wait.h:9,
> from ./include/linux/completion.h:12,
> from ./include/linux/mlx5/driver.h:37,
> from
> drivers/net/ethernet/mellanox/mlx5/core/lib/eq.h:6,
> from
> drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c:33:
> In function 'strncpy',
> inlined from 'mlx5_fw_tracer_save_trace' at
> drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c:549:2,
> inlined from 'mlx5_tracer_print_trace' at
> drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c:574:2:
> ./include/linux/string.h:305:9: warning: '__builtin_strncpy' output
> may
> be truncated copying 256 bytes from a string of length 511
> [-Wstringop-truncation]
> return __builtin_strncpy(p, q, size);
> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> Fix it by using the new strscpy_pad() since the commit 458a3bf82df4
> ("lib/string: Add strscpy_pad() function") which will always
> NUL-terminate the string, and avoid possibly leak data through the
> ring
> buffer where non-admin account might enable these events through
> perf.
>
> Fixes: fd1483fe1f9f ("net/mlx5: Add support for FW reporter dump")
> Signed-off-by: Qian Cai <cai@lca.pw>
Hi Qian and thanks for your patch,
We already have a patch that handles this issue, please check it out:
https://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux.git/commit/?h=net-next-mlx5
^ permalink raw reply
* Re: [PATCH v2 0/3] Add NETIF_F_HW_BR_CAP feature
From: David Miller @ 2019-08-26 21:13 UTC (permalink / raw)
To: andrew
Cc: horatiu.vultur, roopa, nikolay, UNGLinuxDriver, alexandre.belloni,
allan.nielsen, f.fainelli, netdev, linux-kernel, bridge
In-Reply-To: <20190826123811.GA13411@lunn.ch>
From: Andrew Lunn <andrew@lunn.ch>
Date: Mon, 26 Aug 2019 14:38:11 +0200
> I'm still not convinced this is needed. The model is, the hardware is
> there to accelerate what Linux can do in software. Any peculiarities
> of the accelerator should be hidden in the driver. If the accelerator
> can do its job without needing promisc mode, do that in the driver.
I completely agree.
^ permalink raw reply
* Re: [PATCH net-next v3 00/10] Refactor cls hardware offload API to support rtnl-independent drivers
From: David Miller @ 2019-08-26 21:18 UTC (permalink / raw)
To: vladbu; +Cc: netdev, jhs, xiyou.wangcong, jiri, jakub.kicinski, pablo
In-Reply-To: <20190826134506.9705-1-vladbu@mellanox.com>
From: Vlad Buslov <vladbu@mellanox.com>
Date: Mon, 26 Aug 2019 16:44:56 +0300
> Implement following cls API changes:
>
> - Introduce new "unlocked_driver_cb" flag to struct flow_block_offload
> to allow registering and unregistering block hardware offload
> callbacks that do not require caller to hold rtnl lock. Drivers that
> doesn't require users of its tc offload callbacks to hold rtnl lock
> sets the flag to true on block bind/unbind. Internally tcf_block is
> extended with additional lockeddevcnt counter that is used to count
> number of devices that require rtnl lock that block is bound to. When
> this counter is zero, tc_setup_cb_*() functions execute callbacks
> without obtaining rtnl lock.
>
> - Extend cls API single hardware rule update tc_setup_cb_call() function
> with tc_setup_cb_add(), tc_setup_cb_replace(), tc_setup_cb_destroy()
> and tc_setup_cb_reoffload() functions. These new APIs are needed to
> move management of block offload counter, filter in hardware counter
> and flag from classifier implementations to cls API, which is now
> responsible for managing them in concurrency-safe manner. Access to
> cb_list from callback execution code is synchronized by obtaining new
> 'cb_lock' rw_semaphore in read mode, which allows executing callbacks
> in parallel, but excludes any modifications of data from
> register/unregister code. tcf_block offloads counter type is changed
> to atomic integer to allow updating the counter concurrently.
>
> - Extend classifier ops with new ops->hw_add() and ops->hw_del()
> callbacks which are used to notify unlocked classifiers when filter is
> successfully added or deleted to hardware without releasing cb_lock.
> This is necessary to update classifier state atomically with callback
> list traversal and updating of all relevant counters and allows
> unlocked classifiers to synchronize with concurrent reoffload without
> requiring any changes to driver callback API implementations.
...
Looks good, series applied, thanks.
^ permalink raw reply
* Re: [PATCH v1 net-next] net: phy: mdio_bus: make mdiobus_scan also cover PHY that only talks C45
From: David Miller @ 2019-08-26 21:28 UTC (permalink / raw)
To: weifeng.voon
Cc: mcoquelin.stm32, netdev, linux-kernel, joabreu, andrew,
f.fainelli, hkallweit1, boon.leong.ong
In-Reply-To: <1566870769-9967-1-git-send-email-weifeng.voon@intel.com>
There is something wrong with the clock on the computer you are
posting these patches from, the date in these postings are in the
future by several hours.
This messes up the ordering of changes in patchwork and makes my life
miserable to a certain degree, so please fix this.
Thank you.
^ permalink raw reply
* [PATCH net-next v5 0/6] net: dsa: mv88e6xxx: Peridot/Topaz SERDES changes
From: Marek Behún @ 2019-08-26 21:31 UTC (permalink / raw)
To: Vivien Didelot
Cc: netdev, Andrew Lunn, Florian Fainelli, Vladimir Oltean,
Marek Behún
Hello,
this is the fifth version of changes for the Topaz/Peridot family of
switches. The patches apply on net-next.
Changes since v4:
- added Reviewed-by and Tested-by tags on first 2 patches, the others
are changed are affected by changes in patch 3/6, so I did not add
the tags, except for 5/6, which is just macro renaming
- patch 3 was changed: the serdes_get_lane returns 0 on success (lane
was discovered), -ENODEV if not lane is present on the port, and
other error if other error occured. Lane is put into a pointer of
type u8
- patches 4 and 6 were affected by this (error detecting from
serdes_get_lane)
- Andrew's complaint about the two additional parameters
(allow_over_2500 and make_cmode_writable) was addressed, by Vivien's
advice: I put a new method into chip operations structure, named
port_set_cmode_writable. This is called from mv88e6xxx_port_setup_mac
just before port_set_cmode. The method is implemented for Topaz.
The check if cmodes over 2500 should be allowed on given port is now
done in the specific port_set_cmode() that requires it, thus the
allow_over_2500 argument is not needed
Again, tested on Turris Mox with Peridot, Topaz, and Peridot + Topaz.
Marek
Marek Behún (6):
net: dsa: mv88e6xxx: support 2500base-x in SGMII IRQ handler
net: dsa: mv88e6xxx: update code operating on hidden registers
net: dsa: mv88e6xxx: create serdes_get_lane chip operation
net: dsa: mv88e6xxx: simplify SERDES code for Topaz and Peridot
net: dsa: mv88e6xxx: rename port cmode macro
net: dsa: mv88e6xxx: fully support SERDES on Topaz family
drivers/net/dsa/mv88e6xxx/Makefile | 1 +
drivers/net/dsa/mv88e6xxx/chip.c | 96 +++----
drivers/net/dsa/mv88e6xxx/chip.h | 4 +
drivers/net/dsa/mv88e6xxx/port.c | 89 +++++--
drivers/net/dsa/mv88e6xxx/port.h | 31 ++-
drivers/net/dsa/mv88e6xxx/port_hidden.c | 70 +++++
drivers/net/dsa/mv88e6xxx/serdes.c | 325 ++++++++++++------------
drivers/net/dsa/mv88e6xxx/serdes.h | 27 +-
8 files changed, 379 insertions(+), 264 deletions(-)
create mode 100644 drivers/net/dsa/mv88e6xxx/port_hidden.c
--
2.21.0
^ permalink raw reply
* [PATCH net-next v5 1/6] net: dsa: mv88e6xxx: support 2500base-x in SGMII IRQ handler
From: Marek Behún @ 2019-08-26 21:31 UTC (permalink / raw)
To: Vivien Didelot
Cc: netdev, Andrew Lunn, Florian Fainelli, Vladimir Oltean,
Marek Behún
In-Reply-To: <20190826213155.14685-1-marek.behun@nic.cz>
The mv88e6390_serdes_irq_link_sgmii IRQ handler reads the SERDES PHY
status register to determine speed, among other things. If cmode of the
port is set to 2500base-x, though, the PHY still reports 1000 Mbps (the
PHY register itself does not differentiate between 1000 Mbps and 2500
Mbps - it thinks it is running at 1000 Mbps, although clock is 2.5x
faster).
Look at the cmode and set SPEED_2500 if cmode is set to 2500base-x.
Also tell mv88e6xxx_port_setup_mac the PHY interface mode corresponding
to current cmode in terms of phy_interface_t.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Vivien Didelot <vivien.didelot@gmail.com>
---
drivers/net/dsa/mv88e6xxx/serdes.c | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c
index 20c526c2a9ee..678aaba3d019 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.c
+++ b/drivers/net/dsa/mv88e6xxx/serdes.c
@@ -505,9 +505,11 @@ int mv88e6390x_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on)
static void mv88e6390_serdes_irq_link_sgmii(struct mv88e6xxx_chip *chip,
int port, int lane)
{
+ u8 cmode = chip->ports[port].cmode;
struct dsa_switch *ds = chip->ds;
int duplex = DUPLEX_UNKNOWN;
int speed = SPEED_UNKNOWN;
+ phy_interface_t mode;
int link, err;
u16 status;
@@ -527,7 +529,10 @@ static void mv88e6390_serdes_irq_link_sgmii(struct mv88e6xxx_chip *chip,
switch (status & MV88E6390_SGMII_PHY_STATUS_SPEED_MASK) {
case MV88E6390_SGMII_PHY_STATUS_SPEED_1000:
- speed = SPEED_1000;
+ if (cmode == MV88E6XXX_PORT_STS_CMODE_2500BASEX)
+ speed = SPEED_2500;
+ else
+ speed = SPEED_1000;
break;
case MV88E6390_SGMII_PHY_STATUS_SPEED_100:
speed = SPEED_100;
@@ -541,8 +546,22 @@ static void mv88e6390_serdes_irq_link_sgmii(struct mv88e6xxx_chip *chip,
}
}
+ switch (cmode) {
+ case MV88E6XXX_PORT_STS_CMODE_SGMII:
+ mode = PHY_INTERFACE_MODE_SGMII;
+ break;
+ case MV88E6XXX_PORT_STS_CMODE_1000BASE_X:
+ mode = PHY_INTERFACE_MODE_1000BASEX;
+ break;
+ case MV88E6XXX_PORT_STS_CMODE_2500BASEX:
+ mode = PHY_INTERFACE_MODE_2500BASEX;
+ break;
+ default:
+ mode = PHY_INTERFACE_MODE_NA;
+ }
+
err = mv88e6xxx_port_setup_mac(chip, port, link, speed, duplex,
- PAUSE_OFF, PHY_INTERFACE_MODE_NA);
+ PAUSE_OFF, mode);
if (err)
dev_err(chip->dev, "can't propagate PHY settings to MAC: %d\n",
err);
--
2.21.0
^ permalink raw reply related
* [PATCH net-next v5 2/6] net: dsa: mv88e6xxx: update code operating on hidden registers
From: Marek Behún @ 2019-08-26 21:31 UTC (permalink / raw)
To: Vivien Didelot
Cc: netdev, Andrew Lunn, Florian Fainelli, Vladimir Oltean,
Marek Behún
In-Reply-To: <20190826213155.14685-1-marek.behun@nic.cz>
This patch moves the functions operating on the hidden debug registers
into it's own file, port_hidden.c. The functions prefix is renamed from
mv88e6390_hidden_ to mv88e6xxx_port_hidden_, to be consistent with the
rest of this driver. The macros are prefixed with MV88E6XXX_ prefix, and
are changed not to use the BIT() macro nor bit shifts, since the rest of
the port.h file does not use it.
We also add the support for setting the Block Address field when
operating hidden registers. Marvell's mdio examples for SERDES settings
on Topaz use Block Address 0x7 when reading/writing hidden registers,
and although the specification says that block must be set to 0xf, those
settings are reachable only with Block Address 0x7.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Vivien Didelot <vivien.didelot@gmail.com>
---
drivers/net/dsa/mv88e6xxx/Makefile | 1 +
drivers/net/dsa/mv88e6xxx/chip.c | 58 +-------------------
drivers/net/dsa/mv88e6xxx/port.h | 22 +++++---
drivers/net/dsa/mv88e6xxx/port_hidden.c | 70 +++++++++++++++++++++++++
4 files changed, 87 insertions(+), 64 deletions(-)
create mode 100644 drivers/net/dsa/mv88e6xxx/port_hidden.c
diff --git a/drivers/net/dsa/mv88e6xxx/Makefile b/drivers/net/dsa/mv88e6xxx/Makefile
index e85755dde90b..aa645ff86f64 100644
--- a/drivers/net/dsa/mv88e6xxx/Makefile
+++ b/drivers/net/dsa/mv88e6xxx/Makefile
@@ -10,6 +10,7 @@ mv88e6xxx-$(CONFIG_NET_DSA_MV88E6XXX_GLOBAL2) += global2_scratch.o
mv88e6xxx-$(CONFIG_NET_DSA_MV88E6XXX_PTP) += hwtstamp.o
mv88e6xxx-objs += phy.o
mv88e6xxx-objs += port.o
+mv88e6xxx-objs += port_hidden.o
mv88e6xxx-$(CONFIG_NET_DSA_MV88E6XXX_PTP) += ptp.o
mv88e6xxx-objs += serdes.o
mv88e6xxx-objs += smi.o
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index d0bf98c10b2b..ec4274d71145 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2317,60 +2317,6 @@ static int mv88e6xxx_stats_setup(struct mv88e6xxx_chip *chip)
return mv88e6xxx_g1_stats_clear(chip);
}
-/* The mv88e6390 has some hidden registers used for debug and
- * development. The errata also makes use of them.
- */
-static int mv88e6390_hidden_write(struct mv88e6xxx_chip *chip, int port,
- int reg, u16 val)
-{
- u16 ctrl;
- int err;
-
- err = mv88e6xxx_port_write(chip, PORT_RESERVED_1A_DATA_PORT,
- PORT_RESERVED_1A, val);
- if (err)
- return err;
-
- ctrl = PORT_RESERVED_1A_BUSY | PORT_RESERVED_1A_WRITE |
- PORT_RESERVED_1A_BLOCK | port << PORT_RESERVED_1A_PORT_SHIFT |
- reg;
-
- return mv88e6xxx_port_write(chip, PORT_RESERVED_1A_CTRL_PORT,
- PORT_RESERVED_1A, ctrl);
-}
-
-static int mv88e6390_hidden_wait(struct mv88e6xxx_chip *chip)
-{
- int bit = __bf_shf(PORT_RESERVED_1A_BUSY);
-
- return mv88e6xxx_wait_bit(chip, PORT_RESERVED_1A_CTRL_PORT,
- PORT_RESERVED_1A, bit, 0);
-}
-
-
-static int mv88e6390_hidden_read(struct mv88e6xxx_chip *chip, int port,
- int reg, u16 *val)
-{
- u16 ctrl;
- int err;
-
- ctrl = PORT_RESERVED_1A_BUSY | PORT_RESERVED_1A_READ |
- PORT_RESERVED_1A_BLOCK | port << PORT_RESERVED_1A_PORT_SHIFT |
- reg;
-
- err = mv88e6xxx_port_write(chip, PORT_RESERVED_1A_CTRL_PORT,
- PORT_RESERVED_1A, ctrl);
- if (err)
- return err;
-
- err = mv88e6390_hidden_wait(chip);
- if (err)
- return err;
-
- return mv88e6xxx_port_read(chip, PORT_RESERVED_1A_DATA_PORT,
- PORT_RESERVED_1A, val);
-}
-
/* Check if the errata has already been applied. */
static bool mv88e6390_setup_errata_applied(struct mv88e6xxx_chip *chip)
{
@@ -2379,7 +2325,7 @@ static bool mv88e6390_setup_errata_applied(struct mv88e6xxx_chip *chip)
u16 val;
for (port = 0; port < mv88e6xxx_num_ports(chip); port++) {
- err = mv88e6390_hidden_read(chip, port, 0, &val);
+ err = mv88e6xxx_port_hidden_read(chip, 0xf, port, 0, &val);
if (err) {
dev_err(chip->dev,
"Error reading hidden register: %d\n", err);
@@ -2412,7 +2358,7 @@ static int mv88e6390_setup_errata(struct mv88e6xxx_chip *chip)
}
for (port = 0; port < mv88e6xxx_num_ports(chip); port++) {
- err = mv88e6390_hidden_write(chip, port, 0, 0x01c0);
+ err = mv88e6xxx_port_hidden_write(chip, 0xf, port, 0, 0x01c0);
if (err)
return err;
}
diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h
index 1abf5ea033e2..21d2d8f7c8f9 100644
--- a/drivers/net/dsa/mv88e6xxx/port.h
+++ b/drivers/net/dsa/mv88e6xxx/port.h
@@ -261,14 +261,14 @@
#define MV88E6095_PORT_IEEE_PRIO_REMAP_4567 0x19
/* Offset 0x1a: Magic undocumented errata register */
-#define PORT_RESERVED_1A 0x1a
-#define PORT_RESERVED_1A_BUSY BIT(15)
-#define PORT_RESERVED_1A_WRITE BIT(14)
-#define PORT_RESERVED_1A_READ 0
-#define PORT_RESERVED_1A_PORT_SHIFT 5
-#define PORT_RESERVED_1A_BLOCK (0xf << 10)
-#define PORT_RESERVED_1A_CTRL_PORT 4
-#define PORT_RESERVED_1A_DATA_PORT 5
+#define MV88E6XXX_PORT_RESERVED_1A 0x1a
+#define MV88E6XXX_PORT_RESERVED_1A_BUSY 0x8000
+#define MV88E6XXX_PORT_RESERVED_1A_WRITE 0x4000
+#define MV88E6XXX_PORT_RESERVED_1A_READ 0x0000
+#define MV88E6XXX_PORT_RESERVED_1A_PORT_SHIFT 5
+#define MV88E6XXX_PORT_RESERVED_1A_BLOCK_SHIFT 10
+#define MV88E6XXX_PORT_RESERVED_1A_CTRL_PORT 0x04
+#define MV88E6XXX_PORT_RESERVED_1A_DATA_PORT 0x05
int mv88e6xxx_port_read(struct mv88e6xxx_chip *chip, int port, int reg,
u16 *val);
@@ -353,4 +353,10 @@ int mv88e6095_port_set_upstream_port(struct mv88e6xxx_chip *chip, int port,
int mv88e6xxx_port_disable_learn_limit(struct mv88e6xxx_chip *chip, int port);
int mv88e6xxx_port_disable_pri_override(struct mv88e6xxx_chip *chip, int port);
+int mv88e6xxx_port_hidden_write(struct mv88e6xxx_chip *chip, int block,
+ int port, int reg, u16 val);
+int mv88e6xxx_port_hidden_wait(struct mv88e6xxx_chip *chip);
+int mv88e6xxx_port_hidden_read(struct mv88e6xxx_chip *chip, int block, int port,
+ int reg, u16 *val);
+
#endif /* _MV88E6XXX_PORT_H */
diff --git a/drivers/net/dsa/mv88e6xxx/port_hidden.c b/drivers/net/dsa/mv88e6xxx/port_hidden.c
new file mode 100644
index 000000000000..b49d05f0e117
--- /dev/null
+++ b/drivers/net/dsa/mv88e6xxx/port_hidden.c
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Marvell 88E6xxx Switch Hidden Registers support
+ *
+ * Copyright (c) 2008 Marvell Semiconductor
+ *
+ * Copyright (c) 2019 Andrew Lunn <andrew@lunn.ch>
+ */
+
+#include <linux/bitfield.h>
+
+#include "chip.h"
+#include "port.h"
+
+/* The mv88e6390 and mv88e6341 have some hidden registers used for debug and
+ * development. The errata also makes use of them.
+ */
+int mv88e6xxx_port_hidden_write(struct mv88e6xxx_chip *chip, int block,
+ int port, int reg, u16 val)
+{
+ u16 ctrl;
+ int err;
+
+ err = mv88e6xxx_port_write(chip, MV88E6XXX_PORT_RESERVED_1A_DATA_PORT,
+ MV88E6XXX_PORT_RESERVED_1A, val);
+ if (err)
+ return err;
+
+ ctrl = MV88E6XXX_PORT_RESERVED_1A_BUSY |
+ MV88E6XXX_PORT_RESERVED_1A_WRITE |
+ block << MV88E6XXX_PORT_RESERVED_1A_BLOCK_SHIFT |
+ port << MV88E6XXX_PORT_RESERVED_1A_PORT_SHIFT |
+ reg;
+
+ return mv88e6xxx_port_write(chip, MV88E6XXX_PORT_RESERVED_1A_CTRL_PORT,
+ MV88E6XXX_PORT_RESERVED_1A, ctrl);
+}
+
+int mv88e6xxx_port_hidden_wait(struct mv88e6xxx_chip *chip)
+{
+ int bit = __bf_shf(MV88E6XXX_PORT_RESERVED_1A_BUSY);
+
+ return mv88e6xxx_wait_bit(chip, MV88E6XXX_PORT_RESERVED_1A_CTRL_PORT,
+ MV88E6XXX_PORT_RESERVED_1A, bit, 0);
+}
+
+int mv88e6xxx_port_hidden_read(struct mv88e6xxx_chip *chip, int block, int port,
+ int reg, u16 *val)
+{
+ u16 ctrl;
+ int err;
+
+ ctrl = MV88E6XXX_PORT_RESERVED_1A_BUSY |
+ MV88E6XXX_PORT_RESERVED_1A_READ |
+ block << MV88E6XXX_PORT_RESERVED_1A_BLOCK_SHIFT |
+ port << MV88E6XXX_PORT_RESERVED_1A_PORT_SHIFT |
+ reg;
+
+ err = mv88e6xxx_port_write(chip, MV88E6XXX_PORT_RESERVED_1A_CTRL_PORT,
+ MV88E6XXX_PORT_RESERVED_1A, ctrl);
+ if (err)
+ return err;
+
+ err = mv88e6xxx_port_hidden_wait(chip);
+ if (err)
+ return err;
+
+ return mv88e6xxx_port_read(chip, MV88E6XXX_PORT_RESERVED_1A_DATA_PORT,
+ MV88E6XXX_PORT_RESERVED_1A, val);
+}
--
2.21.0
^ permalink raw reply related
* [PATCH net-next v5 4/6] net: dsa: mv88e6xxx: simplify SERDES code for Topaz and Peridot
From: Marek Behún @ 2019-08-26 21:31 UTC (permalink / raw)
To: Vivien Didelot
Cc: netdev, Andrew Lunn, Florian Fainelli, Vladimir Oltean,
Marek Behún
In-Reply-To: <20190826213155.14685-1-marek.behun@nic.cz>
By adding an additional serdes_get_lane implementation (for Topaz), we
can merge the implementations of other SERDES functions (powering and
IRQs). We can skip checking port numbers, since the serdes_get_lane()
methods inform if there is no lane on a port or if the lane cannot be
used for given cmode.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
---
drivers/net/dsa/mv88e6xxx/chip.c | 18 ++---
drivers/net/dsa/mv88e6xxx/port.c | 4 +-
drivers/net/dsa/mv88e6xxx/serdes.c | 105 ++++++++---------------------
drivers/net/dsa/mv88e6xxx/serdes.h | 7 +-
4 files changed, 42 insertions(+), 92 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 5a3fff1971b9..202ccce65b1c 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2927,7 +2927,8 @@ static const struct mv88e6xxx_ops mv88e6141_ops = {
.reset = mv88e6352_g1_reset,
.vtu_getnext = mv88e6352_g1_vtu_getnext,
.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
- .serdes_power = mv88e6341_serdes_power,
+ .serdes_power = mv88e6390_serdes_power,
+ .serdes_get_lane = mv88e6341_serdes_get_lane,
.gpio_ops = &mv88e6352_gpio_ops,
.phylink_validate = mv88e6341_phylink_validate,
};
@@ -3301,10 +3302,10 @@ static const struct mv88e6xxx_ops mv88e6190x_ops = {
.rmu_disable = mv88e6390_g1_rmu_disable,
.vtu_getnext = mv88e6390_g1_vtu_getnext,
.vtu_loadpurge = mv88e6390_g1_vtu_loadpurge,
- .serdes_power = mv88e6390x_serdes_power,
+ .serdes_power = mv88e6390_serdes_power,
.serdes_get_lane = mv88e6390x_serdes_get_lane,
- .serdes_irq_setup = mv88e6390x_serdes_irq_setup,
- .serdes_irq_free = mv88e6390x_serdes_irq_free,
+ .serdes_irq_setup = mv88e6390_serdes_irq_setup,
+ .serdes_irq_free = mv88e6390_serdes_irq_free,
.gpio_ops = &mv88e6352_gpio_ops,
.phylink_validate = mv88e6390x_phylink_validate,
};
@@ -3621,7 +3622,8 @@ static const struct mv88e6xxx_ops mv88e6341_ops = {
.reset = mv88e6352_g1_reset,
.vtu_getnext = mv88e6352_g1_vtu_getnext,
.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
- .serdes_power = mv88e6341_serdes_power,
+ .serdes_power = mv88e6390_serdes_power,
+ .serdes_get_lane = mv88e6341_serdes_get_lane,
.gpio_ops = &mv88e6352_gpio_ops,
.avb_ops = &mv88e6390_avb_ops,
.ptp_ops = &mv88e6352_ptp_ops,
@@ -3854,10 +3856,10 @@ static const struct mv88e6xxx_ops mv88e6390x_ops = {
.rmu_disable = mv88e6390_g1_rmu_disable,
.vtu_getnext = mv88e6390_g1_vtu_getnext,
.vtu_loadpurge = mv88e6390_g1_vtu_loadpurge,
- .serdes_power = mv88e6390x_serdes_power,
+ .serdes_power = mv88e6390_serdes_power,
.serdes_get_lane = mv88e6390x_serdes_get_lane,
- .serdes_irq_setup = mv88e6390x_serdes_irq_setup,
- .serdes_irq_free = mv88e6390x_serdes_irq_free,
+ .serdes_irq_setup = mv88e6390_serdes_irq_setup,
+ .serdes_irq_free = mv88e6390_serdes_irq_free,
.gpio_ops = &mv88e6352_gpio_ops,
.avb_ops = &mv88e6390_avb_ops,
.ptp_ops = &mv88e6352_ptp_ops,
diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c
index 4b0c58c30fea..dde863166da7 100644
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -445,7 +445,7 @@ int mv88e6390x_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
return err;
}
- err = mv88e6390x_serdes_power(chip, port, false);
+ err = mv88e6390_serdes_power(chip, port, false);
if (err)
return err;
}
@@ -470,7 +470,7 @@ int mv88e6390x_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
if (err)
return err;
- err = mv88e6390x_serdes_power(chip, port, true);
+ err = mv88e6390_serdes_power(chip, port, true);
if (err)
return err;
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c
index e58bccc25b7e..12fcc512afad 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.c
+++ b/drivers/net/dsa/mv88e6xxx/serdes.c
@@ -286,6 +286,23 @@ void mv88e6352_serdes_irq_free(struct mv88e6xxx_chip *chip, int port)
chip->ports[port].serdes_irq = 0;
}
+int mv88e6341_serdes_get_lane(struct mv88e6xxx_chip *chip, int port, u8 *lane)
+{
+ u8 cmode = chip->ports[port].cmode;
+
+ if (port != 5)
+ return -ENODEV;
+
+ if (cmode == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
+ cmode == MV88E6XXX_PORT_STS_CMODE_SGMII ||
+ cmode == MV88E6XXX_PORT_STS_CMODE_2500BASEX) {
+ *lane = MV88E6341_PORT5_LANE;
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
int mv88e6390_serdes_get_lane(struct mv88e6xxx_chip *chip, int port, u8 *lane)
{
u8 cmode = chip->ports[port].cmode;
@@ -467,26 +484,9 @@ static int mv88e6390_serdes_power_sgmii(struct mv88e6xxx_chip *chip, u8 lane,
return err;
}
-static int mv88e6390_serdes_power_lane(struct mv88e6xxx_chip *chip, int port,
- u8 lane, bool on)
-{
- u8 cmode = chip->ports[port].cmode;
-
- switch (cmode) {
- case MV88E6XXX_PORT_STS_CMODE_SGMII:
- case MV88E6XXX_PORT_STS_CMODE_1000BASE_X:
- case MV88E6XXX_PORT_STS_CMODE_2500BASEX:
- return mv88e6390_serdes_power_sgmii(chip, lane, on);
- case MV88E6XXX_PORT_STS_CMODE_XAUI:
- case MV88E6XXX_PORT_STS_CMODE_RXAUI:
- return mv88e6390_serdes_power_10g(chip, lane, on);
- }
-
- return 0;
-}
-
int mv88e6390_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on)
{
+ u8 cmode = chip->ports[port].cmode;
u8 lane;
int err;
@@ -497,31 +497,14 @@ int mv88e6390_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on)
return err;
}
- switch (port) {
- case 9 ... 10:
- return mv88e6390_serdes_power_lane(chip, port, lane, on);
- }
-
- return 0;
-}
-
-int mv88e6390x_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on)
-{
- u8 lane;
- int err;
-
- err = mv88e6xxx_serdes_get_lane(chip, port, &lane);
- if (err) {
- if (err == -ENODEV)
- err = 0;
- return err;
- }
-
- switch (port) {
- case 2 ... 4:
- case 5 ... 7:
- case 9 ... 10:
- return mv88e6390_serdes_power_lane(chip, port, lane, on);
+ switch (cmode) {
+ case MV88E6XXX_PORT_STS_CMODE_SGMII:
+ case MV88E6XXX_PORT_STS_CMODE_1000BASE_X:
+ case MV88E6XXX_PORT_STS_CMODE_2500BASEX:
+ return mv88e6390_serdes_power_sgmii(chip, lane, on);
+ case MV88E6XXX_PORT_STS_CMODE_XAUI:
+ case MV88E6XXX_PORT_STS_CMODE_RXAUI:
+ return mv88e6390_serdes_power_10g(chip, lane, on);
}
return 0;
@@ -686,7 +669,7 @@ static irqreturn_t mv88e6390_serdes_thread_fn(int irq, void *dev_id)
return ret;
}
-int mv88e6390x_serdes_irq_setup(struct mv88e6xxx_chip *chip, int port)
+int mv88e6390_serdes_irq_setup(struct mv88e6xxx_chip *chip, int port)
{
int err;
u8 lane;
@@ -725,15 +708,7 @@ int mv88e6390x_serdes_irq_setup(struct mv88e6xxx_chip *chip, int port)
return mv88e6390_serdes_irq_enable(chip, port, lane);
}
-int mv88e6390_serdes_irq_setup(struct mv88e6xxx_chip *chip, int port)
-{
- if (port < 9)
- return 0;
-
- return mv88e6390x_serdes_irq_setup(chip, port);
-}
-
-void mv88e6390x_serdes_irq_free(struct mv88e6xxx_chip *chip, int port)
+void mv88e6390_serdes_irq_free(struct mv88e6xxx_chip *chip, int port)
{
int err;
u8 lane;
@@ -757,27 +732,3 @@ void mv88e6390x_serdes_irq_free(struct mv88e6xxx_chip *chip, int port)
chip->ports[port].serdes_irq = 0;
}
-
-void mv88e6390_serdes_irq_free(struct mv88e6xxx_chip *chip, int port)
-{
- if (port < 9)
- return;
-
- mv88e6390x_serdes_irq_free(chip, port);
-}
-
-int mv88e6341_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on)
-{
- u8 cmode = chip->ports[port].cmode;
-
- if (port != 5)
- return 0;
-
- if (cmode == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
- cmode == MV88E6XXX_PORT_STS_CMODE_SGMII ||
- cmode == MV88E6XXX_PORT_STS_CMODE_2500BASEX)
- return mv88e6390_serdes_power_sgmii(chip, MV88E6341_ADDR_SERDES,
- on);
-
- return 0;
-}
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.h b/drivers/net/dsa/mv88e6xxx/serdes.h
index 959b8cef0b67..c2e6fc3ddf8b 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.h
+++ b/drivers/net/dsa/mv88e6xxx/serdes.h
@@ -28,7 +28,7 @@
#define MV88E6352_SERDES_INT_STATUS 0x13
-#define MV88E6341_ADDR_SERDES 0x15
+#define MV88E6341_PORT5_LANE 0x15
#define MV88E6390_PORT9_LANE0 0x09
#define MV88E6390_PORT9_LANE1 0x12
@@ -87,16 +87,13 @@ static inline int mv88e6xxx_serdes_get_lane(struct mv88e6xxx_chip *chip,
return chip->info->ops->serdes_get_lane(chip, port, lane);
}
+int mv88e6341_serdes_get_lane(struct mv88e6xxx_chip *chip, int port, u8 *lane);
int mv88e6390_serdes_get_lane(struct mv88e6xxx_chip *chip, int port, u8 *lane);
int mv88e6390x_serdes_get_lane(struct mv88e6xxx_chip *chip, int port, u8 *lane);
-int mv88e6341_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on);
int mv88e6352_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on);
int mv88e6390_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on);
-int mv88e6390x_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on);
int mv88e6390_serdes_irq_setup(struct mv88e6xxx_chip *chip, int port);
void mv88e6390_serdes_irq_free(struct mv88e6xxx_chip *chip, int port);
-int mv88e6390x_serdes_irq_setup(struct mv88e6xxx_chip *chip, int port);
-void mv88e6390x_serdes_irq_free(struct mv88e6xxx_chip *chip, int port);
int mv88e6352_serdes_get_sset_count(struct mv88e6xxx_chip *chip, int port);
int mv88e6352_serdes_get_strings(struct mv88e6xxx_chip *chip,
int port, uint8_t *data);
--
2.21.0
^ permalink raw reply related
* [PATCH net-next v5 6/6] net: dsa: mv88e6xxx: fully support SERDES on Topaz family
From: Marek Behún @ 2019-08-26 21:31 UTC (permalink / raw)
To: Vivien Didelot
Cc: netdev, Andrew Lunn, Florian Fainelli, Vladimir Oltean,
Marek Behún
In-Reply-To: <20190826213155.14685-1-marek.behun@nic.cz>
Currently we support SERDES on the Topaz family in a limited way: no
IRQs and the cmode is not writable, thus the mode is determined by
strapping pins.
Marvell's examples though show how to make cmode writable on port 5 and
support SGMII autonegotiation. It is done by writing hidden registers,
for which we already have code.
This patch adds support for making the cmode for the SERDES port
writable on the Topaz family, via a new chip operation,
.port_set_cmode_writable, which is called from mv88e6xxx_port_setup_mac
just before .port_set_cmode.
SERDES IRQs are also enabled for Topaz.
Tested on Turris Mox.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
---
drivers/net/dsa/mv88e6xxx/chip.c | 14 +++++++
drivers/net/dsa/mv88e6xxx/chip.h | 1 +
drivers/net/dsa/mv88e6xxx/port.c | 65 +++++++++++++++++++++++++++++---
drivers/net/dsa/mv88e6xxx/port.h | 5 +++
4 files changed, 79 insertions(+), 6 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 202ccce65b1c..54e88aafba2f 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -454,6 +454,12 @@ int mv88e6xxx_port_setup_mac(struct mv88e6xxx_chip *chip, int port, int link,
goto restore_link;
}
+ if (chip->info->ops->port_set_cmode_writable) {
+ err = chip->info->ops->port_set_cmode_writable(chip, port);
+ if (err && err != -EOPNOTSUPP)
+ goto restore_link;
+ }
+
if (chip->info->ops->port_set_cmode) {
err = chip->info->ops->port_set_cmode(chip, port, mode);
if (err && err != -EOPNOTSUPP)
@@ -2913,6 +2919,8 @@ static const struct mv88e6xxx_ops mv88e6141_ops = {
.port_disable_pri_override = mv88e6xxx_port_disable_pri_override,
.port_link_state = mv88e6352_port_link_state,
.port_get_cmode = mv88e6352_port_get_cmode,
+ .port_set_cmode_writable = mv88e6341_port_set_cmode_writable,
+ .port_set_cmode = mv88e6341_port_set_cmode,
.port_setup_message_port = mv88e6xxx_setup_message_port,
.stats_snapshot = mv88e6390_g1_stats_snapshot,
.stats_set_histogram = mv88e6095_g1_stats_set_histogram,
@@ -2929,6 +2937,8 @@ static const struct mv88e6xxx_ops mv88e6141_ops = {
.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
.serdes_power = mv88e6390_serdes_power,
.serdes_get_lane = mv88e6341_serdes_get_lane,
+ .serdes_irq_setup = mv88e6390_serdes_irq_setup,
+ .serdes_irq_free = mv88e6390_serdes_irq_free,
.gpio_ops = &mv88e6352_gpio_ops,
.phylink_validate = mv88e6341_phylink_validate,
};
@@ -3608,6 +3618,8 @@ static const struct mv88e6xxx_ops mv88e6341_ops = {
.port_disable_pri_override = mv88e6xxx_port_disable_pri_override,
.port_link_state = mv88e6352_port_link_state,
.port_get_cmode = mv88e6352_port_get_cmode,
+ .port_set_cmode_writable = mv88e6341_port_set_cmode_writable,
+ .port_set_cmode = mv88e6341_port_set_cmode,
.port_setup_message_port = mv88e6xxx_setup_message_port,
.stats_snapshot = mv88e6390_g1_stats_snapshot,
.stats_set_histogram = mv88e6095_g1_stats_set_histogram,
@@ -3624,6 +3636,8 @@ static const struct mv88e6xxx_ops mv88e6341_ops = {
.vtu_loadpurge = mv88e6352_g1_vtu_loadpurge,
.serdes_power = mv88e6390_serdes_power,
.serdes_get_lane = mv88e6341_serdes_get_lane,
+ .serdes_irq_setup = mv88e6390_serdes_irq_setup,
+ .serdes_irq_free = mv88e6390_serdes_irq_free,
.gpio_ops = &mv88e6352_gpio_ops,
.avb_ops = &mv88e6390_avb_ops,
.ptp_ops = &mv88e6352_ptp_ops,
diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index 421e8b84bec3..d6b1aa35aa1a 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -400,6 +400,7 @@ struct mv88e6xxx_ops {
/* CMODE control what PHY mode the MAC will use, eg. SGMII, RGMII, etc.
* Some chips allow this to be configured on specific ports.
*/
+ int (*port_set_cmode_writable)(struct mv88e6xxx_chip *chip, int port);
int (*port_set_cmode)(struct mv88e6xxx_chip *chip, int port,
phy_interface_t mode);
int (*port_get_cmode)(struct mv88e6xxx_chip *chip, int port, u8 *cmode);
diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c
index c7630dab18a8..542201214c36 100644
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -392,17 +392,14 @@ phy_interface_t mv88e6390x_port_max_speed_mode(int port)
return PHY_INTERFACE_MODE_NA;
}
-int mv88e6390x_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
- phy_interface_t mode)
+static int mv88e6xxx_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
+ phy_interface_t mode)
{
u8 lane;
u16 cmode;
u16 reg;
int err;
- if (port != 9 && port != 10)
- return -EOPNOTSUPP;
-
/* Default to a slow mode, so freeing up SERDES interfaces for
* other ports which might use them for SFPs.
*/
@@ -484,9 +481,65 @@ int mv88e6390x_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
return 0;
}
+int mv88e6390x_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
+ phy_interface_t mode)
+{
+ if (port != 9 && port != 10)
+ return -EOPNOTSUPP;
+
+ return mv88e6xxx_port_set_cmode(chip, port, mode);
+}
+
int mv88e6390_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
phy_interface_t mode)
{
+ if (port != 9 && port != 10)
+ return -EOPNOTSUPP;
+
+ switch (mode) {
+ case PHY_INTERFACE_MODE_NA:
+ return 0;
+ case PHY_INTERFACE_MODE_XGMII:
+ case PHY_INTERFACE_MODE_XAUI:
+ case PHY_INTERFACE_MODE_RXAUI:
+ return -EINVAL;
+ default:
+ break;
+ }
+
+ return mv88e6xxx_port_set_cmode(chip, port, mode);
+}
+
+int mv88e6341_port_set_cmode_writable(struct mv88e6xxx_chip *chip, int port)
+{
+ int err, addr;
+ u16 reg, bits;
+
+ if (port != 5)
+ return -EOPNOTSUPP;
+
+ addr = chip->info->port_base_addr + port;
+
+ err = mv88e6xxx_port_hidden_read(chip, 0x7, addr, 0, ®);
+ if (err)
+ return err;
+
+ bits = MV88E6341_PORT_RESERVED_1A_FORCE_CMODE |
+ MV88E6341_PORT_RESERVED_1A_SGMII_AN;
+
+ if ((reg & bits) == bits)
+ return 0;
+
+ reg |= bits;
+ return mv88e6xxx_port_hidden_write(chip, 0x7, addr, 0, reg);
+}
+
+int mv88e6341_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
+ phy_interface_t mode)
+{
+ if (port != 5)
+ return -EOPNOTSUPP;
+
switch (mode) {
case PHY_INTERFACE_MODE_NA:
return 0;
@@ -498,7 +551,7 @@ int mv88e6390_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
break;
}
- return mv88e6390x_port_set_cmode(chip, port, mode);
+ return mv88e6xxx_port_set_cmode(chip, port, mode);
}
int mv88e6185_port_get_cmode(struct mv88e6xxx_chip *chip, int port, u8 *cmode)
diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h
index 6d7a067da0f5..e78d68c3e671 100644
--- a/drivers/net/dsa/mv88e6xxx/port.h
+++ b/drivers/net/dsa/mv88e6xxx/port.h
@@ -269,6 +269,8 @@
#define MV88E6XXX_PORT_RESERVED_1A_BLOCK_SHIFT 10
#define MV88E6XXX_PORT_RESERVED_1A_CTRL_PORT 0x04
#define MV88E6XXX_PORT_RESERVED_1A_DATA_PORT 0x05
+#define MV88E6341_PORT_RESERVED_1A_FORCE_CMODE 0x8000
+#define MV88E6341_PORT_RESERVED_1A_SGMII_AN 0x2000
int mv88e6xxx_port_read(struct mv88e6xxx_chip *chip, int port, int reg,
u16 *val);
@@ -334,6 +336,9 @@ int mv88e6097_port_pause_limit(struct mv88e6xxx_chip *chip, int port, u8 in,
u8 out);
int mv88e6390_port_pause_limit(struct mv88e6xxx_chip *chip, int port, u8 in,
u8 out);
+int mv88e6341_port_set_cmode_writable(struct mv88e6xxx_chip *chip, int port);
+int mv88e6341_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
+ phy_interface_t mode);
int mv88e6390_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
phy_interface_t mode);
int mv88e6390x_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
--
2.21.0
^ permalink raw reply related
* [PATCH net-next v5 3/6] net: dsa: mv88e6xxx: create serdes_get_lane chip operation
From: Marek Behún @ 2019-08-26 21:31 UTC (permalink / raw)
To: Vivien Didelot
Cc: netdev, Andrew Lunn, Florian Fainelli, Vladimir Oltean,
Marek Behún
In-Reply-To: <20190826213155.14685-1-marek.behun@nic.cz>
Create a serdes_get_lane() method in the mv88e6xxx operations structure.
Use it instead of calling the different implementations.
Also change the methods so that their return value is used only for
error. The lane number is put into a place referred to by a pointer
given as argument. If the port does not have a lane, return -ENODEV.
Lanes are phy addresses, so use u8 as their type.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
---
drivers/net/dsa/mv88e6xxx/chip.c | 6 +
drivers/net/dsa/mv88e6xxx/chip.h | 3 +
drivers/net/dsa/mv88e6xxx/port.c | 16 +--
drivers/net/dsa/mv88e6xxx/serdes.c | 197 ++++++++++++++++-------------
drivers/net/dsa/mv88e6xxx/serdes.h | 20 ++-
5 files changed, 146 insertions(+), 96 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index ec4274d71145..5a3fff1971b9 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3255,6 +3255,7 @@ static const struct mv88e6xxx_ops mv88e6190_ops = {
.vtu_getnext = mv88e6390_g1_vtu_getnext,
.vtu_loadpurge = mv88e6390_g1_vtu_loadpurge,
.serdes_power = mv88e6390_serdes_power,
+ .serdes_get_lane = mv88e6390_serdes_get_lane,
.serdes_irq_setup = mv88e6390_serdes_irq_setup,
.serdes_irq_free = mv88e6390_serdes_irq_free,
.gpio_ops = &mv88e6352_gpio_ops,
@@ -3301,6 +3302,7 @@ static const struct mv88e6xxx_ops mv88e6190x_ops = {
.vtu_getnext = mv88e6390_g1_vtu_getnext,
.vtu_loadpurge = mv88e6390_g1_vtu_loadpurge,
.serdes_power = mv88e6390x_serdes_power,
+ .serdes_get_lane = mv88e6390x_serdes_get_lane,
.serdes_irq_setup = mv88e6390x_serdes_irq_setup,
.serdes_irq_free = mv88e6390x_serdes_irq_free,
.gpio_ops = &mv88e6352_gpio_ops,
@@ -3347,6 +3349,7 @@ static const struct mv88e6xxx_ops mv88e6191_ops = {
.vtu_getnext = mv88e6390_g1_vtu_getnext,
.vtu_loadpurge = mv88e6390_g1_vtu_loadpurge,
.serdes_power = mv88e6390_serdes_power,
+ .serdes_get_lane = mv88e6390_serdes_get_lane,
.serdes_irq_setup = mv88e6390_serdes_irq_setup,
.serdes_irq_free = mv88e6390_serdes_irq_free,
.avb_ops = &mv88e6390_avb_ops,
@@ -3483,6 +3486,7 @@ static const struct mv88e6xxx_ops mv88e6290_ops = {
.vtu_getnext = mv88e6390_g1_vtu_getnext,
.vtu_loadpurge = mv88e6390_g1_vtu_loadpurge,
.serdes_power = mv88e6390_serdes_power,
+ .serdes_get_lane = mv88e6390_serdes_get_lane,
.serdes_irq_setup = mv88e6390_serdes_irq_setup,
.serdes_irq_free = mv88e6390_serdes_irq_free,
.gpio_ops = &mv88e6352_gpio_ops,
@@ -3800,6 +3804,7 @@ static const struct mv88e6xxx_ops mv88e6390_ops = {
.vtu_getnext = mv88e6390_g1_vtu_getnext,
.vtu_loadpurge = mv88e6390_g1_vtu_loadpurge,
.serdes_power = mv88e6390_serdes_power,
+ .serdes_get_lane = mv88e6390_serdes_get_lane,
.serdes_irq_setup = mv88e6390_serdes_irq_setup,
.serdes_irq_free = mv88e6390_serdes_irq_free,
.gpio_ops = &mv88e6352_gpio_ops,
@@ -3850,6 +3855,7 @@ static const struct mv88e6xxx_ops mv88e6390x_ops = {
.vtu_getnext = mv88e6390_g1_vtu_getnext,
.vtu_loadpurge = mv88e6390_g1_vtu_loadpurge,
.serdes_power = mv88e6390x_serdes_power,
+ .serdes_get_lane = mv88e6390x_serdes_get_lane,
.serdes_irq_setup = mv88e6390x_serdes_irq_setup,
.serdes_irq_free = mv88e6390x_serdes_irq_free,
.gpio_ops = &mv88e6352_gpio_ops,
diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index a406be2f5652..421e8b84bec3 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -443,6 +443,9 @@ struct mv88e6xxx_ops {
/* Power on/off a SERDES interface */
int (*serdes_power)(struct mv88e6xxx_chip *chip, int port, bool on);
+ /* SERDES lane mapping */
+ int (*serdes_get_lane)(struct mv88e6xxx_chip *chip, int port, u8 *lane);
+
/* SERDES interrupt handling */
int (*serdes_irq_setup)(struct mv88e6xxx_chip *chip, int port);
void (*serdes_irq_free)(struct mv88e6xxx_chip *chip, int port);
diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c
index c95cdb73e5a2..4b0c58c30fea 100644
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -395,7 +395,7 @@ phy_interface_t mv88e6390x_port_max_speed_mode(int port)
int mv88e6390x_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
phy_interface_t mode)
{
- int lane;
+ u8 lane;
u16 cmode;
u16 reg;
int err;
@@ -434,11 +434,11 @@ int mv88e6390x_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
if (cmode == chip->ports[port].cmode)
return 0;
- lane = mv88e6390x_serdes_get_lane(chip, port);
- if (lane < 0 && lane != -ENODEV)
- return lane;
+ err = mv88e6xxx_serdes_get_lane(chip, port, &lane);
+ if (err && err != -ENODEV)
+ return err;
- if (lane >= 0) {
+ if (err != -ENODEV) {
if (chip->ports[port].serdes_irq) {
err = mv88e6390_serdes_irq_disable(chip, port, lane);
if (err)
@@ -466,9 +466,9 @@ int mv88e6390x_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
chip->ports[port].cmode = cmode;
- lane = mv88e6390x_serdes_get_lane(chip, port);
- if (lane < 0)
- return lane;
+ err = mv88e6xxx_serdes_get_lane(chip, port, &lane);
+ if (err)
+ return err;
err = mv88e6390x_serdes_power(chip, port, true);
if (err)
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c
index 678aaba3d019..e58bccc25b7e 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.c
+++ b/drivers/net/dsa/mv88e6xxx/serdes.c
@@ -286,10 +286,7 @@ void mv88e6352_serdes_irq_free(struct mv88e6xxx_chip *chip, int port)
chip->ports[port].serdes_irq = 0;
}
-/* Return the SERDES lane address a port is using. Only Ports 9 and 10
- * have SERDES lanes. Returns -ENODEV if a port does not have a lane.
- */
-static int mv88e6390_serdes_get_lane(struct mv88e6xxx_chip *chip, int port)
+int mv88e6390_serdes_get_lane(struct mv88e6xxx_chip *chip, int port, u8 *lane)
{
u8 cmode = chip->ports[port].cmode;
@@ -297,25 +294,27 @@ static int mv88e6390_serdes_get_lane(struct mv88e6xxx_chip *chip, int port)
case 9:
if (cmode == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
cmode == MV88E6XXX_PORT_STS_CMODE_SGMII ||
- cmode == MV88E6XXX_PORT_STS_CMODE_2500BASEX)
- return MV88E6390_PORT9_LANE0;
- return -ENODEV;
+ cmode == MV88E6XXX_PORT_STS_CMODE_2500BASEX) {
+ *lane = MV88E6390_PORT9_LANE0;
+ return 0;
+ }
+ break;
case 10:
if (cmode == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
cmode == MV88E6XXX_PORT_STS_CMODE_SGMII ||
- cmode == MV88E6XXX_PORT_STS_CMODE_2500BASEX)
- return MV88E6390_PORT10_LANE0;
- return -ENODEV;
+ cmode == MV88E6XXX_PORT_STS_CMODE_2500BASEX) {
+ *lane = MV88E6390_PORT10_LANE0;
+ return 0;
+ }
+ break;
default:
- return -ENODEV;
+ break;
}
+
+ return -ENODEV;
}
-/* Return the SERDES lane address a port is using. Ports 9 and 10 can
- * use multiple lanes. If so, return the first lane the port uses.
- * Returns -ENODEV if a port does not have a lane.
- */
-int mv88e6390x_serdes_get_lane(struct mv88e6xxx_chip *chip, int port)
+int mv88e6390x_serdes_get_lane(struct mv88e6xxx_chip *chip, int port, u8 *lane)
{
u8 cmode_port9, cmode_port10, cmode_port;
@@ -327,72 +326,96 @@ int mv88e6390x_serdes_get_lane(struct mv88e6xxx_chip *chip, int port)
case 2:
if (cmode_port9 == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
cmode_port9 == MV88E6XXX_PORT_STS_CMODE_SGMII ||
- cmode_port9 == MV88E6XXX_PORT_STS_CMODE_2500BASEX)
- if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASE_X)
- return MV88E6390_PORT9_LANE1;
- return -ENODEV;
+ cmode_port9 == MV88E6XXX_PORT_STS_CMODE_2500BASEX) {
+ if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASE_X) {
+ *lane = MV88E6390_PORT9_LANE1;
+ return 0;
+ }
+ }
+ break;
case 3:
if (cmode_port9 == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
cmode_port9 == MV88E6XXX_PORT_STS_CMODE_SGMII ||
cmode_port9 == MV88E6XXX_PORT_STS_CMODE_2500BASEX ||
- cmode_port9 == MV88E6XXX_PORT_STS_CMODE_RXAUI)
- if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASE_X)
- return MV88E6390_PORT9_LANE2;
- return -ENODEV;
+ cmode_port9 == MV88E6XXX_PORT_STS_CMODE_RXAUI) {
+ if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASE_X) {
+ *lane = MV88E6390_PORT9_LANE2;
+ return 0;
+ }
+ }
+ break;
case 4:
if (cmode_port9 == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
cmode_port9 == MV88E6XXX_PORT_STS_CMODE_SGMII ||
cmode_port9 == MV88E6XXX_PORT_STS_CMODE_2500BASEX ||
- cmode_port9 == MV88E6XXX_PORT_STS_CMODE_RXAUI)
- if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASE_X)
- return MV88E6390_PORT9_LANE3;
- return -ENODEV;
+ cmode_port9 == MV88E6XXX_PORT_STS_CMODE_RXAUI) {
+ if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASE_X) {
+ *lane = MV88E6390_PORT9_LANE3;
+ return 0;
+ }
+ }
+ break;
case 5:
if (cmode_port10 == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
cmode_port10 == MV88E6XXX_PORT_STS_CMODE_SGMII ||
- cmode_port10 == MV88E6XXX_PORT_STS_CMODE_2500BASEX)
- if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASE_X)
- return MV88E6390_PORT10_LANE1;
- return -ENODEV;
+ cmode_port10 == MV88E6XXX_PORT_STS_CMODE_2500BASEX) {
+ if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASE_X) {
+ *lane = MV88E6390_PORT10_LANE1;
+ return 0;
+ }
+ }
+ break;
case 6:
if (cmode_port10 == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
cmode_port10 == MV88E6XXX_PORT_STS_CMODE_SGMII ||
cmode_port10 == MV88E6XXX_PORT_STS_CMODE_2500BASEX ||
- cmode_port10 == MV88E6XXX_PORT_STS_CMODE_RXAUI)
- if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASE_X)
- return MV88E6390_PORT10_LANE2;
- return -ENODEV;
+ cmode_port10 == MV88E6XXX_PORT_STS_CMODE_RXAUI) {
+ if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASE_X) {
+ *lane = MV88E6390_PORT10_LANE2;
+ return 0;
+ }
+ }
+ break;
case 7:
if (cmode_port10 == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
cmode_port10 == MV88E6XXX_PORT_STS_CMODE_SGMII ||
cmode_port10 == MV88E6XXX_PORT_STS_CMODE_2500BASEX ||
- cmode_port10 == MV88E6XXX_PORT_STS_CMODE_RXAUI)
- if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASE_X)
- return MV88E6390_PORT10_LANE3;
- return -ENODEV;
+ cmode_port10 == MV88E6XXX_PORT_STS_CMODE_RXAUI) {
+ if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASE_X) {
+ *lane = MV88E6390_PORT10_LANE3;
+ return 0;
+ }
+ }
+ break;
case 9:
if (cmode_port9 == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
cmode_port9 == MV88E6XXX_PORT_STS_CMODE_SGMII ||
cmode_port9 == MV88E6XXX_PORT_STS_CMODE_2500BASEX ||
cmode_port9 == MV88E6XXX_PORT_STS_CMODE_XAUI ||
- cmode_port9 == MV88E6XXX_PORT_STS_CMODE_RXAUI)
- return MV88E6390_PORT9_LANE0;
- return -ENODEV;
+ cmode_port9 == MV88E6XXX_PORT_STS_CMODE_RXAUI) {
+ *lane = MV88E6390_PORT9_LANE0;
+ return 0;
+ }
+ break;
case 10:
if (cmode_port10 == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
cmode_port10 == MV88E6XXX_PORT_STS_CMODE_SGMII ||
cmode_port10 == MV88E6XXX_PORT_STS_CMODE_2500BASEX ||
cmode_port10 == MV88E6XXX_PORT_STS_CMODE_XAUI ||
- cmode_port10 == MV88E6XXX_PORT_STS_CMODE_RXAUI)
- return MV88E6390_PORT10_LANE0;
- return -ENODEV;
+ cmode_port10 == MV88E6XXX_PORT_STS_CMODE_RXAUI) {
+ *lane = MV88E6390_PORT10_LANE0;
+ return 0;
+ }
+ break;
default:
- return -ENODEV;
+ break;
}
+
+ return -ENODEV;
}
/* Set the power on/off for 10GBASE-R and 10GBASE-X4/X2 */
-static int mv88e6390_serdes_power_10g(struct mv88e6xxx_chip *chip, int lane,
+static int mv88e6390_serdes_power_10g(struct mv88e6xxx_chip *chip, u8 lane,
bool on)
{
u16 val, new_val;
@@ -419,7 +442,7 @@ static int mv88e6390_serdes_power_10g(struct mv88e6xxx_chip *chip, int lane,
}
/* Set the power on/off for SGMII and 1000Base-X */
-static int mv88e6390_serdes_power_sgmii(struct mv88e6xxx_chip *chip, int lane,
+static int mv88e6390_serdes_power_sgmii(struct mv88e6xxx_chip *chip, u8 lane,
bool on)
{
u16 val, new_val;
@@ -445,7 +468,7 @@ static int mv88e6390_serdes_power_sgmii(struct mv88e6xxx_chip *chip, int lane,
}
static int mv88e6390_serdes_power_lane(struct mv88e6xxx_chip *chip, int port,
- int lane, bool on)
+ u8 lane, bool on)
{
u8 cmode = chip->ports[port].cmode;
@@ -464,14 +487,15 @@ static int mv88e6390_serdes_power_lane(struct mv88e6xxx_chip *chip, int port,
int mv88e6390_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on)
{
- int lane;
-
- lane = mv88e6390_serdes_get_lane(chip, port);
- if (lane == -ENODEV)
- return 0;
+ u8 lane;
+ int err;
- if (lane < 0)
- return lane;
+ err = mv88e6xxx_serdes_get_lane(chip, port, &lane);
+ if (err) {
+ if (err == -ENODEV)
+ err = 0;
+ return err;
+ }
switch (port) {
case 9 ... 10:
@@ -483,14 +507,15 @@ int mv88e6390_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on)
int mv88e6390x_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on)
{
- int lane;
-
- lane = mv88e6390x_serdes_get_lane(chip, port);
- if (lane == -ENODEV)
- return 0;
+ u8 lane;
+ int err;
- if (lane < 0)
- return lane;
+ err = mv88e6xxx_serdes_get_lane(chip, port, &lane);
+ if (err) {
+ if (err == -ENODEV)
+ err = 0;
+ return err;
+ }
switch (port) {
case 2 ... 4:
@@ -503,7 +528,7 @@ int mv88e6390x_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on)
}
static void mv88e6390_serdes_irq_link_sgmii(struct mv88e6xxx_chip *chip,
- int port, int lane)
+ int port, u8 lane)
{
u8 cmode = chip->ports[port].cmode;
struct dsa_switch *ds = chip->ds;
@@ -570,7 +595,7 @@ static void mv88e6390_serdes_irq_link_sgmii(struct mv88e6xxx_chip *chip,
}
static int mv88e6390_serdes_irq_enable_sgmii(struct mv88e6xxx_chip *chip,
- int lane)
+ u8 lane)
{
return mv88e6390_serdes_write(chip, lane, MDIO_MMD_PHYXS,
MV88E6390_SGMII_INT_ENABLE,
@@ -579,14 +604,14 @@ static int mv88e6390_serdes_irq_enable_sgmii(struct mv88e6xxx_chip *chip,
}
static int mv88e6390_serdes_irq_disable_sgmii(struct mv88e6xxx_chip *chip,
- int lane)
+ u8 lane)
{
return mv88e6390_serdes_write(chip, lane, MDIO_MMD_PHYXS,
MV88E6390_SGMII_INT_ENABLE, 0);
}
int mv88e6390_serdes_irq_enable(struct mv88e6xxx_chip *chip, int port,
- int lane)
+ u8 lane)
{
u8 cmode = chip->ports[port].cmode;
int err = 0;
@@ -602,7 +627,7 @@ int mv88e6390_serdes_irq_enable(struct mv88e6xxx_chip *chip, int port,
}
int mv88e6390_serdes_irq_disable(struct mv88e6xxx_chip *chip, int port,
- int lane)
+ u8 lane)
{
u8 cmode = chip->ports[port].cmode;
int err = 0;
@@ -618,7 +643,7 @@ int mv88e6390_serdes_irq_disable(struct mv88e6xxx_chip *chip, int port,
}
static int mv88e6390_serdes_irq_status_sgmii(struct mv88e6xxx_chip *chip,
- int lane, u16 *status)
+ u8 lane, u16 *status)
{
int err;
@@ -635,10 +660,10 @@ static irqreturn_t mv88e6390_serdes_thread_fn(int irq, void *dev_id)
irqreturn_t ret = IRQ_NONE;
u8 cmode = port->cmode;
u16 status;
- int lane;
int err;
+ u8 lane;
- lane = mv88e6390x_serdes_get_lane(chip, port->port);
+ mv88e6xxx_serdes_get_lane(chip, port->port, &lane);
mv88e6xxx_reg_lock(chip);
@@ -663,16 +688,15 @@ static irqreturn_t mv88e6390_serdes_thread_fn(int irq, void *dev_id)
int mv88e6390x_serdes_irq_setup(struct mv88e6xxx_chip *chip, int port)
{
- int lane;
int err;
+ u8 lane;
- lane = mv88e6390x_serdes_get_lane(chip, port);
-
- if (lane == -ENODEV)
- return 0;
-
- if (lane < 0)
- return lane;
+ err = mv88e6xxx_serdes_get_lane(chip, port, &lane);
+ if (err) {
+ if (err == -ENODEV)
+ err = 0;
+ return err;
+ }
chip->ports[port].serdes_irq = irq_find_mapping(chip->g2_irq.domain,
port);
@@ -711,13 +735,16 @@ int mv88e6390_serdes_irq_setup(struct mv88e6xxx_chip *chip, int port)
void mv88e6390x_serdes_irq_free(struct mv88e6xxx_chip *chip, int port)
{
- int lane = mv88e6390x_serdes_get_lane(chip, port);
-
- if (lane == -ENODEV)
- return;
+ int err;
+ u8 lane;
- if (lane < 0)
+ err = mv88e6xxx_serdes_get_lane(chip, port, &lane);
+ if (err) {
+ if (err != -ENODEV)
+ dev_err(chip->dev, "Unable to free SERDES irq: %d\n",
+ err);
return;
+ }
mv88e6390_serdes_irq_disable(chip, port, lane);
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.h b/drivers/net/dsa/mv88e6xxx/serdes.h
index ff5b94439335..959b8cef0b67 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.h
+++ b/drivers/net/dsa/mv88e6xxx/serdes.h
@@ -74,7 +74,21 @@
#define MV88E6390_SGMII_PHY_STATUS_SPD_DPL_VALID BIT(11)
#define MV88E6390_SGMII_PHY_STATUS_LINK BIT(10)
-int mv88e6390x_serdes_get_lane(struct mv88e6xxx_chip *chip, int port);
+/* Put the SERDES lane address a port is using into *lane. If a port has
+ * multiple lanes, should put the first lane the port is using. If a port does
+ * not have a lane, return -ENODEV.
+ */
+static inline int mv88e6xxx_serdes_get_lane(struct mv88e6xxx_chip *chip,
+ int port, u8 *lane)
+{
+ if (!chip->info->ops->serdes_get_lane)
+ return -EOPNOTSUPP;
+
+ return chip->info->ops->serdes_get_lane(chip, port, lane);
+}
+
+int mv88e6390_serdes_get_lane(struct mv88e6xxx_chip *chip, int port, u8 *lane);
+int mv88e6390x_serdes_get_lane(struct mv88e6xxx_chip *chip, int port, u8 *lane);
int mv88e6341_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on);
int mv88e6352_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on);
int mv88e6390_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on);
@@ -89,9 +103,9 @@ int mv88e6352_serdes_get_strings(struct mv88e6xxx_chip *chip,
int mv88e6352_serdes_get_stats(struct mv88e6xxx_chip *chip, int port,
uint64_t *data);
int mv88e6390_serdes_irq_enable(struct mv88e6xxx_chip *chip, int port,
- int lane);
+ u8 lane);
int mv88e6390_serdes_irq_disable(struct mv88e6xxx_chip *chip, int port,
- int lane);
+ u8 lane);
int mv88e6352_serdes_irq_setup(struct mv88e6xxx_chip *chip, int port);
void mv88e6352_serdes_irq_free(struct mv88e6xxx_chip *chip, int port);
--
2.21.0
^ permalink raw reply related
* [PATCH net-next v5 5/6] net: dsa: mv88e6xxx: rename port cmode macro
From: Marek Behún @ 2019-08-26 21:31 UTC (permalink / raw)
To: Vivien Didelot
Cc: netdev, Andrew Lunn, Florian Fainelli, Vladimir Oltean,
Marek Behún
In-Reply-To: <20190826213155.14685-1-marek.behun@nic.cz>
This is a cosmetic update. We are removing the last underscore from
macros MV88E6XXX_PORT_STS_CMODE_100BASE_X and
MV88E6XXX_PORT_STS_CMODE_1000BASE_X. The 2500base-x version does not
have that underscore. Also PHY_INTERFACE_MODE_ macros do not have it
there.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
drivers/net/dsa/mv88e6xxx/port.c | 4 +--
drivers/net/dsa/mv88e6xxx/port.h | 4 +--
drivers/net/dsa/mv88e6xxx/serdes.c | 48 +++++++++++++++---------------
3 files changed, 28 insertions(+), 28 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c
index dde863166da7..c7630dab18a8 100644
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -411,7 +411,7 @@ int mv88e6390x_port_set_cmode(struct mv88e6xxx_chip *chip, int port,
switch (mode) {
case PHY_INTERFACE_MODE_1000BASEX:
- cmode = MV88E6XXX_PORT_STS_CMODE_1000BASE_X;
+ cmode = MV88E6XXX_PORT_STS_CMODE_1000BASEX;
break;
case PHY_INTERFACE_MODE_SGMII:
cmode = MV88E6XXX_PORT_STS_CMODE_SGMII;
@@ -618,7 +618,7 @@ int mv88e6352_port_link_state(struct mv88e6xxx_chip *chip, int port,
else
state->interface = PHY_INTERFACE_MODE_RGMII;
break;
- case MV88E6XXX_PORT_STS_CMODE_1000BASE_X:
+ case MV88E6XXX_PORT_STS_CMODE_1000BASEX:
state->interface = PHY_INTERFACE_MODE_1000BASEX;
break;
case MV88E6XXX_PORT_STS_CMODE_SGMII:
diff --git a/drivers/net/dsa/mv88e6xxx/port.h b/drivers/net/dsa/mv88e6xxx/port.h
index 21d2d8f7c8f9..6d7a067da0f5 100644
--- a/drivers/net/dsa/mv88e6xxx/port.h
+++ b/drivers/net/dsa/mv88e6xxx/port.h
@@ -43,8 +43,8 @@
#define MV88E6XXX_PORT_STS_FLOW_CTL 0x0010
#define MV88E6XXX_PORT_STS_CMODE_MASK 0x000f
#define MV88E6XXX_PORT_STS_CMODE_RGMII 0x0007
-#define MV88E6XXX_PORT_STS_CMODE_100BASE_X 0x0008
-#define MV88E6XXX_PORT_STS_CMODE_1000BASE_X 0x0009
+#define MV88E6XXX_PORT_STS_CMODE_100BASEX 0x0008
+#define MV88E6XXX_PORT_STS_CMODE_1000BASEX 0x0009
#define MV88E6XXX_PORT_STS_CMODE_SGMII 0x000a
#define MV88E6XXX_PORT_STS_CMODE_2500BASEX 0x000b
#define MV88E6XXX_PORT_STS_CMODE_XAUI 0x000c
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c
index 12fcc512afad..9424e401dbc7 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.c
+++ b/drivers/net/dsa/mv88e6xxx/serdes.c
@@ -73,8 +73,8 @@ static bool mv88e6352_port_has_serdes(struct mv88e6xxx_chip *chip, int port)
{
u8 cmode = chip->ports[port].cmode;
- if ((cmode == MV88E6XXX_PORT_STS_CMODE_100BASE_X) ||
- (cmode == MV88E6XXX_PORT_STS_CMODE_1000BASE_X) ||
+ if ((cmode == MV88E6XXX_PORT_STS_CMODE_100BASEX) ||
+ (cmode == MV88E6XXX_PORT_STS_CMODE_1000BASEX) ||
(cmode == MV88E6XXX_PORT_STS_CMODE_SGMII))
return true;
@@ -293,7 +293,7 @@ int mv88e6341_serdes_get_lane(struct mv88e6xxx_chip *chip, int port, u8 *lane)
if (port != 5)
return -ENODEV;
- if (cmode == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
+ if (cmode == MV88E6XXX_PORT_STS_CMODE_1000BASEX ||
cmode == MV88E6XXX_PORT_STS_CMODE_SGMII ||
cmode == MV88E6XXX_PORT_STS_CMODE_2500BASEX) {
*lane = MV88E6341_PORT5_LANE;
@@ -309,7 +309,7 @@ int mv88e6390_serdes_get_lane(struct mv88e6xxx_chip *chip, int port, u8 *lane)
switch (port) {
case 9:
- if (cmode == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
+ if (cmode == MV88E6XXX_PORT_STS_CMODE_1000BASEX ||
cmode == MV88E6XXX_PORT_STS_CMODE_SGMII ||
cmode == MV88E6XXX_PORT_STS_CMODE_2500BASEX) {
*lane = MV88E6390_PORT9_LANE0;
@@ -317,7 +317,7 @@ int mv88e6390_serdes_get_lane(struct mv88e6xxx_chip *chip, int port, u8 *lane)
}
break;
case 10:
- if (cmode == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
+ if (cmode == MV88E6XXX_PORT_STS_CMODE_1000BASEX ||
cmode == MV88E6XXX_PORT_STS_CMODE_SGMII ||
cmode == MV88E6XXX_PORT_STS_CMODE_2500BASEX) {
*lane = MV88E6390_PORT10_LANE0;
@@ -341,71 +341,71 @@ int mv88e6390x_serdes_get_lane(struct mv88e6xxx_chip *chip, int port, u8 *lane)
switch (port) {
case 2:
- if (cmode_port9 == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
+ if (cmode_port9 == MV88E6XXX_PORT_STS_CMODE_1000BASEX ||
cmode_port9 == MV88E6XXX_PORT_STS_CMODE_SGMII ||
cmode_port9 == MV88E6XXX_PORT_STS_CMODE_2500BASEX) {
- if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASE_X) {
+ if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASEX) {
*lane = MV88E6390_PORT9_LANE1;
return 0;
}
}
break;
case 3:
- if (cmode_port9 == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
+ if (cmode_port9 == MV88E6XXX_PORT_STS_CMODE_1000BASEX ||
cmode_port9 == MV88E6XXX_PORT_STS_CMODE_SGMII ||
cmode_port9 == MV88E6XXX_PORT_STS_CMODE_2500BASEX ||
cmode_port9 == MV88E6XXX_PORT_STS_CMODE_RXAUI) {
- if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASE_X) {
+ if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASEX) {
*lane = MV88E6390_PORT9_LANE2;
return 0;
}
}
break;
case 4:
- if (cmode_port9 == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
+ if (cmode_port9 == MV88E6XXX_PORT_STS_CMODE_1000BASEX ||
cmode_port9 == MV88E6XXX_PORT_STS_CMODE_SGMII ||
cmode_port9 == MV88E6XXX_PORT_STS_CMODE_2500BASEX ||
cmode_port9 == MV88E6XXX_PORT_STS_CMODE_RXAUI) {
- if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASE_X) {
+ if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASEX) {
*lane = MV88E6390_PORT9_LANE3;
return 0;
}
}
break;
case 5:
- if (cmode_port10 == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
+ if (cmode_port10 == MV88E6XXX_PORT_STS_CMODE_1000BASEX ||
cmode_port10 == MV88E6XXX_PORT_STS_CMODE_SGMII ||
cmode_port10 == MV88E6XXX_PORT_STS_CMODE_2500BASEX) {
- if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASE_X) {
+ if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASEX) {
*lane = MV88E6390_PORT10_LANE1;
return 0;
}
}
break;
case 6:
- if (cmode_port10 == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
+ if (cmode_port10 == MV88E6XXX_PORT_STS_CMODE_1000BASEX ||
cmode_port10 == MV88E6XXX_PORT_STS_CMODE_SGMII ||
cmode_port10 == MV88E6XXX_PORT_STS_CMODE_2500BASEX ||
cmode_port10 == MV88E6XXX_PORT_STS_CMODE_RXAUI) {
- if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASE_X) {
+ if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASEX) {
*lane = MV88E6390_PORT10_LANE2;
return 0;
}
}
break;
case 7:
- if (cmode_port10 == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
+ if (cmode_port10 == MV88E6XXX_PORT_STS_CMODE_1000BASEX ||
cmode_port10 == MV88E6XXX_PORT_STS_CMODE_SGMII ||
cmode_port10 == MV88E6XXX_PORT_STS_CMODE_2500BASEX ||
cmode_port10 == MV88E6XXX_PORT_STS_CMODE_RXAUI) {
- if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASE_X) {
+ if (cmode_port == MV88E6XXX_PORT_STS_CMODE_1000BASEX) {
*lane = MV88E6390_PORT10_LANE3;
return 0;
}
}
break;
case 9:
- if (cmode_port9 == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
+ if (cmode_port9 == MV88E6XXX_PORT_STS_CMODE_1000BASEX ||
cmode_port9 == MV88E6XXX_PORT_STS_CMODE_SGMII ||
cmode_port9 == MV88E6XXX_PORT_STS_CMODE_2500BASEX ||
cmode_port9 == MV88E6XXX_PORT_STS_CMODE_XAUI ||
@@ -415,7 +415,7 @@ int mv88e6390x_serdes_get_lane(struct mv88e6xxx_chip *chip, int port, u8 *lane)
}
break;
case 10:
- if (cmode_port10 == MV88E6XXX_PORT_STS_CMODE_1000BASE_X ||
+ if (cmode_port10 == MV88E6XXX_PORT_STS_CMODE_1000BASEX ||
cmode_port10 == MV88E6XXX_PORT_STS_CMODE_SGMII ||
cmode_port10 == MV88E6XXX_PORT_STS_CMODE_2500BASEX ||
cmode_port10 == MV88E6XXX_PORT_STS_CMODE_XAUI ||
@@ -499,7 +499,7 @@ int mv88e6390_serdes_power(struct mv88e6xxx_chip *chip, int port, bool on)
switch (cmode) {
case MV88E6XXX_PORT_STS_CMODE_SGMII:
- case MV88E6XXX_PORT_STS_CMODE_1000BASE_X:
+ case MV88E6XXX_PORT_STS_CMODE_1000BASEX:
case MV88E6XXX_PORT_STS_CMODE_2500BASEX:
return mv88e6390_serdes_power_sgmii(chip, lane, on);
case MV88E6XXX_PORT_STS_CMODE_XAUI:
@@ -558,7 +558,7 @@ static void mv88e6390_serdes_irq_link_sgmii(struct mv88e6xxx_chip *chip,
case MV88E6XXX_PORT_STS_CMODE_SGMII:
mode = PHY_INTERFACE_MODE_SGMII;
break;
- case MV88E6XXX_PORT_STS_CMODE_1000BASE_X:
+ case MV88E6XXX_PORT_STS_CMODE_1000BASEX:
mode = PHY_INTERFACE_MODE_1000BASEX;
break;
case MV88E6XXX_PORT_STS_CMODE_2500BASEX:
@@ -601,7 +601,7 @@ int mv88e6390_serdes_irq_enable(struct mv88e6xxx_chip *chip, int port,
switch (cmode) {
case MV88E6XXX_PORT_STS_CMODE_SGMII:
- case MV88E6XXX_PORT_STS_CMODE_1000BASE_X:
+ case MV88E6XXX_PORT_STS_CMODE_1000BASEX:
case MV88E6XXX_PORT_STS_CMODE_2500BASEX:
err = mv88e6390_serdes_irq_enable_sgmii(chip, lane);
}
@@ -617,7 +617,7 @@ int mv88e6390_serdes_irq_disable(struct mv88e6xxx_chip *chip, int port,
switch (cmode) {
case MV88E6XXX_PORT_STS_CMODE_SGMII:
- case MV88E6XXX_PORT_STS_CMODE_1000BASE_X:
+ case MV88E6XXX_PORT_STS_CMODE_1000BASEX:
case MV88E6XXX_PORT_STS_CMODE_2500BASEX:
err = mv88e6390_serdes_irq_disable_sgmii(chip, lane);
}
@@ -652,7 +652,7 @@ static irqreturn_t mv88e6390_serdes_thread_fn(int irq, void *dev_id)
switch (cmode) {
case MV88E6XXX_PORT_STS_CMODE_SGMII:
- case MV88E6XXX_PORT_STS_CMODE_1000BASE_X:
+ case MV88E6XXX_PORT_STS_CMODE_1000BASEX:
case MV88E6XXX_PORT_STS_CMODE_2500BASEX:
err = mv88e6390_serdes_irq_status_sgmii(chip, lane, &status);
if (err)
--
2.21.0
^ permalink raw reply related
* Re: TLS record double free
From: Jakub Kicinski @ 2019-08-26 21:32 UTC (permalink / raw)
To: Mallesham Jatharakonda
Cc: borisp, davejwatson, daniel, davem, ast, kafai, netdev, bpf
In-Reply-To: <CADgrbRrtawBDAnk+E-PBUd2qiEd7Q3SrvF7F+HVjsE=6JAnvHg@mail.gmail.com>
Thank you for the report.
On Sun, 25 Aug 2019 22:21:50 +0530, Mallesham Jatharakonda wrote:
> Hi All,
>
> Am facing one tls double while using the Nitrox(cavium) card and n5pf
> driver over the TLS module.
>
> Please see the below details:
>
> TLS module is crashing While running SSL record encryption using
> Klts_send_[file]
>
> Precondition:
> 1) Installed 5.3-rc4.
> 2) Nitrox5 card pluggin.
Presumably this card contains a crypto accelerator? Does it have any
special characteristic which could help us narrow down the bug search?
Before we proceed - are you able to reproduce this issue with an
pure upstream kernel? It seems the kernel in the BUG report is tainted.
> Steps to produce the issue:
> 1) Install n5pf.ko.(drivers/crypto/cavium/nitrox)
> 2) Install tls.ko if not is installed by default(net/tls)
> 3) Taken uperf tool from git.
> 3.1) Modified uperf to use tls module by using setsocket.
> 3.2) Modified uperf tool to support sendfile with SSL.
>
>
> Test:
> 1) Running uperf with 4threads.
> 2) Each Thread send the data using sendfile over SSL protocol.
>
>
> After few seconds kernel is crashing because of record list corruption
>
>
> [ 270.888952] ------------[ cut here ]------------
> [ 270.890450] list_del corruption, ffff91cc3753a800->prev is
> LIST_POISON2 (dead000000000122)
> [ 270.891194] WARNING: CPU: 1 PID: 7387 at lib/list_debug.c:50
> __list_del_entry_valid+0x62/0x90
> [ 270.892037] Modules linked in: n5pf(OE) netconsole tls(OE) bonding
> intel_rapl_msr intel_rapl_common sb_edac x86_pkg_temp_thermal
> intel_powerclamp coretemp kvm_intel kvm iTCO_wdt iTCO_vendor_support
> irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel
> aesni_intel crypto_simd mei_me cryptd glue_helper ipmi_si sg mei
> lpc_ich pcspkr joydev ioatdma i2c_i801 ipmi_devintf ipmi_msghandler
> wmi ip_tables xfs libcrc32c sd_mod mgag200 drm_vram_helper ttm
> drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm isci
> libsas ahci scsi_transport_sas libahci crc32c_intel serio_raw igb
> libata ptp pps_core dca i2c_algo_bit dm_mirror dm_region_hash dm_log
> dm_mod [last unloaded: nitrox_drv]
> [ 270.896836] CPU: 1 PID: 7387 Comm: uperf Kdump: loaded Tainted: G
> OE 5.3.0-rc4 #1
^ permalink raw reply
* [PATCH v5 net-next 00/18] ionic: Add ionic driver
From: Shannon Nelson @ 2019-08-26 21:33 UTC (permalink / raw)
To: snelson, netdev, davem
This is a patch series that adds the ionic driver, supporting the Pensando
ethernet device.
In this initial patchset we implement basic transmit and receive. Later
patchsets will add more advanced features.
Our thanks to Saeed Mahameed, David Miller, Andrew Lunn, Michal Kubecek,
Jacub Kicinski, Jiri Pirko, and the ever present kbuild test robots for
their comments and suggestions.
New in v5:
- code reorganized for more sane layout, with a side benefit of getting
rid of a "defined but not used" complaint after patch 5
- added "ionic_" prefix to struct definitions and fixed up remaining
reverse christmas tree formatting (I think I got them all...)
- ndo_open and ndo_stop reworked for better error recovery
- interrupt coalescing enabled at driver start
- unnecessary log messaging removed from events
- double copy added in the module prom read to assure a clean copy
- added BQL counting
- fixed a TSO unmap issue found in testing
- generalize a bit-flag wait with timeout
- added devlink into earlier code and dropped patch 19
New in v4:
- use devlink struct alloc for ionic device specific struct
- add support for devlink_port
- fixup devlink fixed vs running version usage
- use bitmap_copy() instead of memcpy() for link_ksettings
- don't bother to zero out the advertising bits before copying
in the support bits
- drop unknown xcvr types (will be expanded on later)
- flap the connection to force auto-negotiation
- use is_power_of_2() rather than open code
- simplify set/get_pauseparam use of pause->autoneg
- add a couple comments about NIC status data updated in DMA spaces
New in v3:
- use le32_to_cpu() on queue_count[] values in debugfs
- dma_free_coherent() can handle NULL pointers
- remove unused SS_TEST from ethtool handlers
- one more case of stop the tx ring if there is no room
- remove a couple of stray // comments
New in v2:
- removed debugfs error checking and cut down on debugfs use
- remove redundant bounds checking on incoming values for mtu and ethtool
- don't alloc rx_filter memory until the match type has been checked
- free the ionic struct on remove
- simplified link_up and netif_carrier_ok comparison
- put stats into ethtool -S, out of debugfs
- moved dev_cmd and dev_info dumping to ethtool -d, out of debugfs
- added devlink support
- used kernel's rss init routines rather than open code
- set the Kbuild dependant on 64BIT
- cut down on some unnecessary log messaging
- cleaned up ionic_get_link_ksettings
- cleaned up other little code bits here and there
Shannon Nelson (18):
ionic: Add basic framework for IONIC Network device driver
ionic: Add hardware init and device commands
ionic: Add port management commands
ionic: Add basic lif support
ionic: Add interrupts and doorbells
ionic: Add basic adminq support
ionic: Add adminq action
ionic: Add notifyq support
ionic: Add the basic NDO callbacks for netdev support
ionic: Add management of rx filters
ionic: Add Rx filter and rx_mode ndo support
ionic: Add async link status check and basic stats
ionic: Add initial ethtool support
ionic: Add Tx and Rx handling
ionic: Add netdev-event handling
ionic: Add driver stats
ionic: Add RSS support
ionic: Add coalesce and other features
.../networking/device_drivers/index.rst | 1 +
.../device_drivers/pensando/ionic.rst | 43 +
MAINTAINERS | 8 +
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/pensando/Kconfig | 32 +
drivers/net/ethernet/pensando/Makefile | 6 +
drivers/net/ethernet/pensando/ionic/Makefile | 8 +
drivers/net/ethernet/pensando/ionic/ionic.h | 74 +
.../net/ethernet/pensando/ionic/ionic_bus.h | 16 +
.../ethernet/pensando/ionic/ionic_bus_pci.c | 292 ++
.../ethernet/pensando/ionic/ionic_debugfs.c | 269 ++
.../ethernet/pensando/ionic/ionic_debugfs.h | 34 +
.../net/ethernet/pensando/ionic/ionic_dev.c | 524 ++++
.../net/ethernet/pensando/ionic/ionic_dev.h | 306 ++
.../ethernet/pensando/ionic/ionic_devlink.c | 95 +
.../ethernet/pensando/ionic/ionic_devlink.h | 14 +
.../ethernet/pensando/ionic/ionic_ethtool.c | 780 ++++++
.../ethernet/pensando/ionic/ionic_ethtool.h | 9 +
.../net/ethernet/pensando/ionic/ionic_if.h | 2482 +++++++++++++++++
.../net/ethernet/pensando/ionic/ionic_lif.c | 2266 +++++++++++++++
.../net/ethernet/pensando/ionic/ionic_lif.h | 302 ++
.../net/ethernet/pensando/ionic/ionic_main.c | 554 ++++
.../net/ethernet/pensando/ionic/ionic_regs.h | 136 +
.../ethernet/pensando/ionic/ionic_rx_filter.c | 150 +
.../ethernet/pensando/ionic/ionic_rx_filter.h | 35 +
.../net/ethernet/pensando/ionic/ionic_stats.c | 334 +++
.../net/ethernet/pensando/ionic/ionic_stats.h | 53 +
.../net/ethernet/pensando/ionic/ionic_txrx.c | 894 ++++++
.../net/ethernet/pensando/ionic/ionic_txrx.h | 15 +
30 files changed, 9734 insertions(+)
create mode 100644 Documentation/networking/device_drivers/pensando/ionic.rst
create mode 100644 drivers/net/ethernet/pensando/Kconfig
create mode 100644 drivers/net/ethernet/pensando/Makefile
create mode 100644 drivers/net/ethernet/pensando/ionic/Makefile
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic.h
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_bus.h
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_bus_pci.c
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_debugfs.c
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_debugfs.h
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_dev.c
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_dev.h
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_devlink.c
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_devlink.h
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_ethtool.c
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_ethtool.h
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_if.h
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_lif.c
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_lif.h
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_main.c
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_regs.h
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_rx_filter.h
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_stats.c
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_stats.h
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_txrx.c
create mode 100644 drivers/net/ethernet/pensando/ionic/ionic_txrx.h
--
2.17.1
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox