From: "Voltaire Pascual" <voltaire@voltaire.servebeer.com>
To: xchris <lyra@fastwebnet.it>, netfilter@lists.netfilter.org
Subject: Re: VPN Issue - help
Date: Tue, 6 May 2003 20:45:34 +0800 [thread overview]
Message-ID: <001001c313cd$662b19f0$6400a8c0@homes> (raw)
In-Reply-To: 200305061135.30694.lyra@fastwebnet.it
Hi Chris,
Here's my configuration:
##################################
"/etc/pptpd.conf"
option /etc/ppp/options.pptpd
localip 192.168.0.10
remoteip 192.168.0.180-200
##################################
"/etc/ppp/options.pptpd"
lock
proxyarp
auth
mppe-40
mppe-128
mppe-stateless
require-chapms-v2
ms-dns 192.168.0.10
ms-dns 206.172.11.21
netmask 255.255.255.0
##################################
"ifconfig - VPN Client connected"
ppp0 (206.163.247.9) = public IP
eth0 (192.168.0.10) = private IP (192.168.0.0/24)
eth0 Link encap:Ethernet HWaddr 00:40:D0:09:83:6F
inet addr:192.168.0.10 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:456067 errors:0 dropped:0 overruns:0 frame:14190
TX packets:445109 errors:0 dropped:0 overruns:1 carrier:13205
collisions:16678 txqueuelen:100
RX bytes:225854445 (215.3 Mb) TX bytes:196873356 (187.7 Mb)
Interrupt:9
ppp0 Link encap:Point-to-Point Protocol
inet addr:206.163.247.9 P-t-P:206.163.246.1 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
RX packets:327124 errors:0 dropped:0 overruns:0 frame:0
TX packets:253529 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:207103245 (197.5 Mb) TX bytes:31867835 (30.3 Mb)
ppp1 Link encap:Point-to-Point Protocol
inet addr:192.168.0.10 P-t-P:192.168.0.180 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1
RX packets:29 errors:0 dropped:0 overruns:0 frame:0
TX packets:15 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:2392 (2.3 Kb) TX bytes:259 (259.0 b)
##################################
"route -n"
Destination Gateway Genmask Flags Metric Ref
Use Iface
206.163.246.1 0.0.0.0 255.255.255.255 UH 0 0 0
ppp0
192.168.0.180 0.0.0.0 255.255.255.255 UH 0 0 0
ppp1
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0
0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0
0 lo
0.0.0.0 206.163.246.1 0.0.0.0 UG 0 0 0
ppp0
##################################
----- Original Message -----
From: "xchris" <lyra@fastwebnet.it>
To: <netfilter@lists.netfilter.org>
Cc: "Voltaire Pascual" <voltaire@voltaire.servebeer.com>
Sent: Tuesday, May 06, 2003 5:35 PM
Subject: Re: VPN Issue - help
On Tuesday 06 May 2003 00:42, Voltaire Pascual wrote:
> repost:
>
> Clients can connect to the VPN server w/o any problem. Private network is
> 192.168.0.0/24. VPN server IP is
>
> Public (ppp0) = 203.x.x.x
> Private (eth0) = 192.168.0.10
>> When client is connected to the VPN server, it can ping the VPN but not
the
> other machines in the network. Client IP when connected is
> 192.168.0.80/255.255.255.255. clients can surf the net after they are
> connected but cannot see other machines inside the network.
>
> ###########################
> other config:
> net.ipv4.ip_forward = 1
> net.ipv4.conf.eth0.proxy_arp = 1
>
> ###########################
> client is connected to the VPN. here's the result of ifconfig:
>
> ppp1 Link encap:Point-to-Point Protocol
> inet addr:192.168.0.10 P-t-P:192.168.0.80 Mask:255.255.255.255
> UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1
> RX packets:18 errors:0 dropped:0 overruns:0 frame:0
> TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:3
> RX bytes:1062 (1.0 Kb) TX bytes:147 (147.0 b)
> ###########################
> route -n
>
> 192.168.0.180 0.0.0.0 255.255.255.255 UH 0 0 0
> ppp1 ###########################
>
>
> What could be the problem? What iptables rule should i do.
from route -n
you should have
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0
eth(?)
not 192.168.0.180/32
what is .180?
maybe you should post your ifconfig (complete) and route -n (complete) and
maybe your pptpd.conf
bye
next prev parent reply other threads:[~2003-05-06 12:45 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-05 22:42 VPN Issue - help Voltaire Pascual
2003-05-06 9:35 ` xchris
2003-05-06 12:45 ` Voltaire Pascual [this message]
2003-05-07 7:37 ` xchris
2003-05-07 9:23 ` xchris
2003-05-07 9:30 ` vpn help from tanzania Muffadal Essaji
2003-05-07 10:06 ` xchris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001001c313cd$662b19f0$6400a8c0@homes' \
--to=voltaire@voltaire.servebeer.com \
--cc=lyra@fastwebnet.it \
--cc=netfilter@lists.netfilter.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox