From: "Voltaire Pascual" <voltaire@voltaire.servebeer.com>
To: netfilter@lists.netfilter.org
Subject: VPN Issue - help
Date: Tue, 6 May 2003 06:42:38 +0800 [thread overview]
Message-ID: <006c01c31357$a1565ce0$6400a8c0@homes> (raw)
[-- Attachment #1: Type: text/plain, Size: 1294 bytes --]
repost:
Clients can connect to the VPN server w/o any problem. Private network is 192.168.0.0/24. VPN server IP is
Public (ppp0) = 203.x.x.x
Private (eth0) = 192.168.0.10
When client is connected to the VPN server, it can ping the VPN but not the other machines in the network. Client IP when connected is 192.168.0.80/255.255.255.255. clients can surf the net after they are connected but cannot see other machines inside the network.
###########################
other config:
net.ipv4.ip_forward = 1
net.ipv4.conf.eth0.proxy_arp = 1
###########################
client is connected to the VPN. here's the result of ifconfig:
ppp1 Link encap:Point-to-Point Protocol
inet addr:192.168.0.10 P-t-P:192.168.0.80 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1
RX packets:18 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:1062 (1.0 Kb) TX bytes:147 (147.0 b)
###########################
route -n
192.168.0.180 0.0.0.0 255.255.255.255 UH 0 0 0 ppp1
###########################
What could be the problem? What iptables rule should i do.
TIA
/Voltaire
[-- Attachment #2: Type: text/html, Size: 3347 bytes --]
next reply other threads:[~2003-05-05 22:42 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-05 22:42 Voltaire Pascual [this message]
2003-05-06 9:35 ` VPN Issue - help xchris
2003-05-06 12:45 ` Voltaire Pascual
2003-05-07 7:37 ` xchris
2003-05-07 9:23 ` xchris
2003-05-07 9:30 ` vpn help from tanzania Muffadal Essaji
2003-05-07 10:06 ` xchris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='006c01c31357$a1565ce0$6400a8c0@homes' \
--to=voltaire@voltaire.servebeer.com \
--cc=netfilter@lists.netfilter.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox