Problems with IRC "module"

Problems with IRC "module"

[Michael A. Nunes]

Background: I currently do NOT build my kernel with any modules, as my linux
box is only used as a firewall/router/etc.  I don't see a need to be able to
dynamically load/unload things.  As such, I build all netfilter code
directly into my kernel.

Problem: Up until 2.4.20 it has always been possible for me to hard-code
ports into ip_conntrack_irc.c and ip_nat_irc.c by simply adding the
following:

if (ports[0] == 0) {
                ports[0] = 4646;
                ports[1] = 5190;
                ports[2] = 5554;
                ports[3] = 6667;
                ports[4] = 6868;
                ports[5] = 7000;

in the respect parts of either file.  Like I said, this has ALWAYS worked up
until 2.4.20.  DCCs in/out on any port in the above list would always work.
With 2.4.20 after adding the above the only thing that works is DCCs IN!
DCCs going out from a NAT'd box no longer make it through to the internet!

My question to you: What in the IRC "module" has changed so drastically that
I can no longer use the above method for "hard-coding" ports?

--
Michael A. Nunes
/p at pcmike dot net
http://pcmike.net/