From: Joel <zealous@bonbon.net>
To: netfilter <netfilter@lists.netfilter.org>
Subject: Re: Ip accounting Help
Date: Wed, 23 Jun 2004 16:27:25 +0530 [thread overview]
Message-ID: <1087988244.2036.60.camel@joel.d2visp.com> (raw)
In-Reply-To: <200406231001.24925.Antony@Soft-Solutions.co.uk>
On Wed, 2004-06-23 at 14:31, Antony Stone wrote:
> On Wednesday 23 June 2004 4:49 am, Joel wrote:
>
> > Hi all,
> >
> > Currently I am working on Ip accounting in linux.
> > My system is Redhat 9.0 with iptables v1.2.7a
> > This redhat is doing Squid-Caching/ Nat/ Bandwidth management with tc/
> > Real ip forwarding.
> >
> > I want to do Ip accounting of upload and download. I want to know how
> > much per ip bandwidth consumption is ?
> >
> > As i m doing source nat and Real ip forwarding, FORWARD chain will have
> > bytes counters. So FORWARD chain will give the correct figure of how
> > much the ip has used the bandwidth ???
>
> Beware of trying to do this if you are using the stateful connection tracking
> of netfilter (iptables -I FORWARD -m state --state ESTABLISHED,RELATED),
> because if you are, then almost all of the packets going through the machine
> (specifically, all except the first one of each connection) will be processed
> by this one rule, and all the other rules in the FORWARD chain will only see
> one packet per connection (the first one).
>
> You may be able to do what you want using the mangle table of the FORWARD
> chain, but not with the default filter table.
>
> Regards,
>
> Antony.
--
Hi Antony,
Yes I am using stateful connection tracking of netfilter ( iptables -I FORWARD -m state --state ESTABLISHED,RELATED)
So as per you i have used FORWARD chain in MANGLE table like this.
# iptables -t mangle -i eth1 -A FORWARD -s 10.1.1.24/29 -j ACCEPT ---> I think for Download traffic ---> M I right ?
# iptables -t mangle -i eth0 -A FORWARD -d 10.1.1.24/29 -j ACCEPT ---> I think for Upload traffic ----> M I right ?
This is the output of
# iptables -t mangle -nvL FORWARD
Chain FORWARD (policy ACCEPT 1747K packets, 318M bytes)
pkts bytes target prot opt in out source destination
1068 91499 ACCEPT all -- eth1 * 10.1.1.24/29 0.0.0.0/0
148 26923 ACCEPT all -- eth0 * 0.0.0.0/0 10.1.1.24/29
Antony i have lot of other ip address but i have created only this subnet for mangle table for testing.
Traffic bytes are passing through this.
So is the correct method ?
Will be the bytes over here are accurate ???
Thanking you,
Joel n.solanki
Systems Administrator
(M) 91-9825500258
D2V ISP PVT LTD
http://www.d2visp.com/
next prev parent reply other threads:[~2004-06-23 10:57 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-23 3:49 Ip accounting Help Joel
2004-06-23 9:01 ` Antony Stone
2004-06-23 10:57 ` Joel [this message]
2004-06-23 11:41 ` Antony Stone
2004-06-24 3:29 ` Joel Solanki
2004-06-25 11:27 ` Joel Solanki
2004-06-26 4:30 ` Ip accounting Help--> Urgent Joel Solanki
2004-06-26 8:22 ` Antony Stone
2004-06-26 8:33 ` Askar Ali Khan
2004-06-26 9:20 ` Joel Solanki
2004-06-26 9:29 ` Antony Stone
2004-06-26 9:55 ` Joel Solanki
2004-06-26 10:23 ` Joel Solanki
2004-06-26 11:16 ` Antony Stone
2004-06-26 11:40 ` Joel Solanki
2004-06-23 9:16 ` Ip accounting Help Dharmendra T.
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1087988244.2036.60.camel@joel.d2visp.com \
--to=zealous@bonbon.net \
--cc=netfilter@lists.netfilter.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox