* IPv6 and NAT/connection tracking
@ 2003-06-16 12:38 Internet Protocol version Six
0 siblings, 0 replies; only message in thread
From: Internet Protocol version Six @ 2003-06-16 12:38 UTC (permalink / raw)
To: netfilter
Hello all, I have a box that's configured as a firewall and router for IPv6, which is doing it's job fine, well, fine.., IPv6 connections keep timing out, they work for a second or 30 and then it timesout -> connections, ping6, traceroutes, ... from the Internet to the IPv6 address behind the router don't work anymore. Also if I do a ping6 or make a connection to a remote IPv6 host on the Internet it doesn't work, however if I ping6 the router from the network, everything works again...for about 30 seconds again, and then the problem begins again...
I was told that this is caused by NAT/connection tracking. Is there *any* solution to this? This is really annoying as I *need* NAT, but also want to give IPv6 connectivity to other machines on the LAN.
With kind regards,
-----------------------------------------------------
Mail.be, WebMail and Virtual Office
http://www.mail.be
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-06-16 12:38 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-06-16 12:38 IPv6 and NAT/connection tracking Internet Protocol version Six
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox