* Allow inward HTTP through double firewall
@ 2004-02-27 23:57 Daniel Miller
0 siblings, 0 replies; only message in thread
From: Daniel Miller @ 2004-02-27 23:57 UTC (permalink / raw)
To: netfilter
OK. I know I'm doing this wrong - it's not a failure of the software.
I accept that.
Would some kind soul please show me where I screwed up?
My physical connection -
Internet connects to eth1 interface of "stonewall"
"stonewall", utilizing eth0 interface connects to "foxy", using
foxy's eth1 interface and a private subnet (192.168.69.0)
our internal lan connects to "foxy" on foxy's eth0 interface using
subnet 192.168.0.0.
Foxy has Stonewall defined as it's default gateway, and the client
computers have Foxy defined as their default gateway.
Outbound traffic works just dandy.
Now I want to start allowing access from the outside to certain
resources. First, I want to get to the webserver on "amy"
Addresses:
amy 192.168.0.2
foxy 192.168.0.1 / 192.168.69.2
stonewall 192.168.69.1 / internet
Following is my iptables script from both foxy and stonewall (except for
static IP addresses):
#Setting the EXTERNAL and INTERNAL interfaces for the network
EXTIF="eth1"
INTIF="eth0"
EXTIP="192.168.69.2"
# Assign the internal TCP/IP network and IP address
INTNET="192.168.0.0/24"
INTIP="192.168.0.1/24"
UNIVERSE="0.0.0.0/0"
# The address for the internal www server to forward external clients to
WWWIP="192.168.0.2" # This is amy's address, set on foxy. Stonewall
shows 192.168.69.2, foxy's address
echo "1" > /proc/sys/net/ipv4/ip_forward
$IPTABLES -P INPUT DROP
$IPTABLES -F INPUT
$IPTABLES -P OUTPUT DROP
$IPTABLES -F OUTPUT
$IPTABLES -P FORWARD DROP
$IPTABLES -F FORWARD
$IPTABLES -F -t nat
if [ -n "`$IPTABLES -L | $GREP drop-and-log-it`" ]; then
$IPTABLES -F drop-and-log-it
fi
$IPTABLES -X
$IPTABLES -Z
$IPTABLES -N drop-and-log-it
$IPTABLES -A drop-and-log-it -j REJECT
$IPTABLES -A INPUT -i lo -s $UNIVERSE -d $UNIVERSE -j ACCEPT
$IPTABLES -A INPUT -i $INTIF -s $INTNET -d $UNIVERSE -j ACCEPT
$IPTABLES -A INPUT -i $EXTIF -s $INTNET -d $UNIVERSE -j drop-and-log-it
$IPTABLES -A INPUT -i $EXTIF -s $UNIVERSE -d $EXTIP -m state --state
ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A INPUT -s $UNIVERSE -d $UNIVERSE -j drop-and-log-it
$IPTABLES -A OUTPUT -o lo -s $UNIVERSE -d $UNIVERSE -j ACCEPT
$IPTABLES -A OUTPUT -o $INTIF -s $EXTIP -d $INTNET -j ACCEPT
$IPTABLES -A OUTPUT -o $INTIF -s $INTIP -d $INTNET -j ACCEPT
$IPTABLES -A OUTPUT -o $EXTIF -s $UNIVERSE -d $INTNET -j drop-and-log-it
$IPTABLES -A OUTPUT -o $EXTIF -s $EXTIP -d $UNIVERSE -j ACCEPT
$IPTABLES -A OUTPUT -s $UNIVERSE -d $UNIVERSE -j drop-and-log-it
$IPTABLES -A FORWARD -i $EXTIF -o $INTIF -p tcp --dport 80 -m state \
--state NEW,ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A PREROUTING -t nat -p tcp -d $EXTIP --dport 80 -j DNAT --to
$WWWIP:80
$IPTABLES -A FORWARD -i $EXTIF -o $INTIF -m state --state
ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT
$IPTABLES -A FORWARD -j drop-and-log-it
$IPTABLES -t nat -A POSTROUTING -o $EXTIF -j SNAT --to $EXTIP
So please help me by smacking me between the eyes with whatever I
screwed up here. Thanx.
Daniel
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-02-27 23:57 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-02-27 23:57 Allow inward HTTP through double firewall Daniel Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox