Linux Netfilter discussions
 help / color / mirror / Atom feed
* mark causes high CPU/using tc in conjunction with NAT
@ 2004-05-22 19:22 Paul Lambert
  0 siblings, 0 replies; only message in thread
From: Paul Lambert @ 2004-05-22 19:22 UTC (permalink / raw)
  To: netfilter

Using below configuration multiplied by 3000+ nodes to control bandwidth 
causes very high kernel cpu usage (99.5%) narrowed it down to the mangle 
table. Any ideas to do this more efficiently would be appreciated.

The mangle table entry (indicated by ***) is sucking all the cpu. I am 
running RH7.3 kernel  2.4.18-3 and iptables 1.2.5
This setup has worked well for more than 1000 devices but as the network 
has grown to 3000+ devices the CPU is not keeping up. I have thought to 
use IPMARK instead of MARK. Or, to possibly use CLASSIFY. Since this is 
hard to recreate in the lab I was looking for some experienced advice on 
the matter.

### root ###
tc qdisc add dev eth0 root handle 1: cbq bandwidth 100Mbit avpkt 1000 cell 8

tc qdisc add dev eth1 root handle 1: cbq bandwidth 100Mbit avpkt 1000 cell 8


### Classful qdisc upload/download rate for a group of IP address ###
tc class add dev eth0 parent 1:0 classid 1:11 cbq bandwidth 100Mbit rate 
100Mbit weight 54Kbit prio 8 allot 1514 cell 8 maxburst 20 av pkt 1000

tc qdisc add dev eth0 parent 1:11 tbf rate 2048Kbit buffer 10Kb/8 limit 
15Kb mtu 1500

tc class add dev eth1 parent 1:0 classid 1:11 cbq bandwidth 100Mbit rate 
100Mbit weight 54Kbit prio 8 allot 1514 cell 8 maxburst 20 av pkt 1000

tc qdisc add dev eth1 parent 1:11 tbf rate 2048Kbit buffer 10Kb/8 limit 
15Kb mtu 1500


### A single IP address and it's own upload/download rate ###
tc class add dev eth0 parent 1:11 classid 1:2115 cbq bandwidth 100Mbit 
rate 100Mbit weight 54Kbit prio 8 allot 1514 cell 8 maxburst 20 avpkt 1000

tc qdisc add dev eth0 parent 1:2115 tbf rate 2048Kbit buffer 10Kb/8 
limit 15Kb mtu 1500

*** eth0 is MASQUERADE'd so I mark the packet on eth1 ***
*** I have narrowed it down to this one entry sucking all the CPU ***
iptables -t mangle -A PREROUTING -s 10.10.6.20 -i eth1 -j MARK 
--set-mark 0x843

tc filter add dev eth0 parent 1:0 protocol ip prio 1 handle 2115 fw 
classid 1:2115

tc class add dev eth1 parent 1:11 classid 1:2115 cbq bandwidth 100Mbit 
rate 100Mbit weight 54Kbit prio 8 allot 1514 cell 8 maxburst 20 avpkt 1000

tc qdisc add dev eth1 parent 1:2115 tbf rate 2048Kbit buffer 10Kb/8 
limit 15Kb mtu 1500

tc filter add dev eth1 parent 1:0 protocol ip prio 1 u32 match ip dst 
10.10.6.20 flowid 1:2115






^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2004-05-22 19:22 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-05-22 19:22 mark causes high CPU/using tc in conjunction with NAT Paul Lambert

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox