* Dropping a specific Owner from a certain IP
@ 2004-09-07 19:46 Scott Mayo
2004-09-07 20:32 ` Jason Opperisano
0 siblings, 1 reply; 3+ messages in thread
From: Scott Mayo @ 2004-09-07 19:46 UTC (permalink / raw)
To: netfilter
I have my filter set up with 1 internal nic and 1 external nic. My
workstations are addressed 10.0.0.1-10.0.255.255 with a subnet of
255.255.0.0. My filter 10.0.0.1 has Dansguardian and Squid/Squidguard
which authenticates through my Samba server 10.0.0.5.
I have a generic user 'user' that I give to a lab in the elementary
(10.0.8.1-10.0.8.255). Is there some way that I can stop that generic
login from being used from anywhere else? I tried the following, but it
did not do anything.
iptables -A OUTPUT -m owner --uid-owner 10000 -s ! 10.0.8.0/24 -j DROP
10000 is the uid of 'user' on my samba server. Is the uid actually
pulled from the filter server? If so then I guess that I cannot do this.
Thanks for any info.
--
Scott Mayo
Technology Coordinator
Bloomfield Schools
PH: 573-568-4564
FA: 573-568-4565
Pager: 800-264-2535 X2549
WindowS
LinUX!
Duct tape is like the force, it has a light side and a dark side and it
holds the universe together.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Dropping a specific Owner from a certain IP
2004-09-07 19:46 Dropping a specific Owner from a certain IP Scott Mayo
@ 2004-09-07 20:32 ` Jason Opperisano
2004-09-07 21:05 ` Scott Mayo
0 siblings, 1 reply; 3+ messages in thread
From: Jason Opperisano @ 2004-09-07 20:32 UTC (permalink / raw)
To: netfilter
On Tue, 2004-09-07 at 15:46, Scott Mayo wrote:
> I have my filter set up with 1 internal nic and 1 external nic. My
> workstations are addressed 10.0.0.1-10.0.255.255 with a subnet of
> 255.255.0.0. My filter 10.0.0.1 has Dansguardian and Squid/Squidguard
> which authenticates through my Samba server 10.0.0.5.
>
> I have a generic user 'user' that I give to a lab in the elementary
> (10.0.8.1-10.0.8.255). Is there some way that I can stop that generic
> login from being used from anywhere else? I tried the following, but it
> did not do anything.
>
> iptables -A OUTPUT -m owner --uid-owner 10000 -s ! 10.0.8.0/24 -j DROP
>
> 10000 is the uid of 'user' on my samba server. Is the uid actually
> pulled from the filter server? If so then I guess that I cannot do this.
> Thanks for any info.
apply this filter in dansguardian. it's the only thing in this scenario
that knows both the src ip and username--it should be able to force them
to be paired up. i do this with squid+squidguard for a similar setup as
yours...never used dansguardian myself, so i can't get all OT on this
one...
-j
--
Jason Opperisano <opie@817west.com>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Dropping a specific Owner from a certain IP
2004-09-07 20:32 ` Jason Opperisano
@ 2004-09-07 21:05 ` Scott Mayo
0 siblings, 0 replies; 3+ messages in thread
From: Scott Mayo @ 2004-09-07 21:05 UTC (permalink / raw)
To: netfilter
Jason Opperisano wrote:
> On Tue, 2004-09-07 at 15:46, Scott Mayo wrote:
>
>>I have my filter set up with 1 internal nic and 1 external nic. My
>>workstations are addressed 10.0.0.1-10.0.255.255 with a subnet of
>>255.255.0.0. My filter 10.0.0.1 has Dansguardian and Squid/Squidguard
>>which authenticates through my Samba server 10.0.0.5.
>>
>>I have a generic user 'user' that I give to a lab in the elementary
>>(10.0.8.1-10.0.8.255). Is there some way that I can stop that generic
>>login from being used from anywhere else? I tried the following, but it
>>did not do anything.
>>
>>iptables -A OUTPUT -m owner --uid-owner 10000 -s ! 10.0.8.0/24 -j DROP
>>
>>10000 is the uid of 'user' on my samba server. Is the uid actually
>>pulled from the filter server? If so then I guess that I cannot do this.
>>Thanks for any info.
>
>
> apply this filter in dansguardian. it's the only thing in this scenario
> that knows both the src ip and username--it should be able to force them
> to be paired up. i do this with squid+squidguard for a similar setup as
> yours...never used dansguardian myself, so i can't get all OT on this
> one...
Dansguardian does not have ACL's so it is impossible there. I can either
block an ip or block a user, but not on both. Once Dansguardian hands
the information back to squid/squidguard (which does have the acls that
I need), then all I have for an ip is the internal nic of the computer
so once again I do not have any ip info.
I guess that I will have to setup another occurence of squid so that I
can use it for acls only, go to dansguardian and back to my other
occurence of squid which will be used for the cache.
Thanks for the input.
--
Scott Mayo
Technology Coordinator
Bloomfield Schools
PH: 573-568-4564
FA: 573-568-4565
Pager: 800-264-2535 X2549
WindowS
LinUX!
Duct tape is like the force, it has a light side and a dark side and it
holds the universe together.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2004-09-07 21:05 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-09-07 19:46 Dropping a specific Owner from a certain IP Scott Mayo
2004-09-07 20:32 ` Jason Opperisano
2004-09-07 21:05 ` Scott Mayo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).