* Transparent bridge with layer7 filter ?
@ 2005-09-19 17:52 Michael Gale
2005-09-22 4:28 ` Grant Taylor
0 siblings, 1 reply; 2+ messages in thread
From: Michael Gale @ 2005-09-19 17:52 UTC (permalink / raw)
To: netfilter
Hello,
I want to setup layer7 filter (http://l7-filter.sourceforge.net/) on a
Linux box that will be transparent to the network. I have looked up
transparent bridging any have found several ways to do this but non
mention layer7 filter. Some like ebtables (ebtables.sourceforge.net)
make it seem like you can not do this ?
Has any one done this yet ? If so can you provide some pointers.
Thanks
Michael
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Transparent bridge with layer7 filter ?
2005-09-19 17:52 Transparent bridge with layer7 filter ? Michael Gale
@ 2005-09-22 4:28 ` Grant Taylor
0 siblings, 0 replies; 2+ messages in thread
From: Grant Taylor @ 2005-09-22 4:28 UTC (permalink / raw)
To: netfilter
Michael Gale wrote:
> Hello,
>
> I want to setup layer7 filter (http://l7-filter.sourceforge.net/) on a
> Linux box that will be transparent to the network. I have looked up
> transparent bridging any have found several ways to do this but non
> mention layer7 filter. Some like ebtables (ebtables.sourceforge.net)
> make it seem like you can not do this ?
Try taking a look at EBTables (bridging) with "Bridged IP/ARP packets filtering" enabled in the kernel as well as the Layer7 patch. I think this will allow you to use the IPTables rules to see bridged traffic and thus you can run the layer 7 filter against it.
Grant. . . .
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2005-09-22 4:28 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-09-19 17:52 Transparent bridge with layer7 filter ? Michael Gale
2005-09-22 4:28 ` Grant Taylor
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox