* iptables + PPPoE routing problem
@ 2006-01-19 3:34 John Mok
0 siblings, 0 replies; only message in thread
From: John Mok @ 2006-01-19 3:34 UTC (permalink / raw)
To: netfilter
Hi,
I would like to install a Linux firewall connecting to ISP using PPPoE.
The following are the software installed on the Linux box :-
Linux kernel 2.4.21 (SuSE distribution)
iptables 1.3.1
Roaring Penguin PPPoE 3.7
pppd 2.4.1
I have successfully connect to the ISP, and I could NAT'd through the
ppp0 interface. On the Linux box, I could ping anywhere. However, on the
DMZ, I could only ping the ppp0 interface and failed to ping ISP side of
the point-to-point connection. It still failed even I make all the
iptables rules with "ACCEPT".
What went wrong? I hope someone could help me to how to setup the PPPoE
properly to make the DMZ work.
Thanks a lot.
John Mok
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-01-19 3:34 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-01-19 3:34 iptables + PPPoE routing problem John Mok
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox