Iptables SNAT for pkt generated by internal process

Iptables SNAT for pkt generated by internal process

[moniacheli]

I think I could use these commands:

iptables -t mangle -A OUTPUT -p udp --dport 514 -j MARK --set-mark 13
iptables -t nat -A POSTROUTING -- mark 13 -SNAT x.x.x.x

I tried, but I had this problem on first command:
"Couldn't load match `MARK':/lib//iptables/libipt_MARK.so: cannot open 
shared object file: No such file or directory"

Are the commands above rigth and is it sufficient to copy libipt_MARK.
so into :/lib//iptables/ directory to solve my problem?

Thanks a lot to Alexandru Dragoi

Bye Monia

----Messaggio originale----
Da: alex@zoomnet.ro
Data: 16/05/2006 13.00
A: "moniacheli@tiscali.it"<moniacheli@tiscali.it>
Cc: <netfilter@lists.netfilter.org>
Ogg: Re: Iptables SNAT for pkt generated by internal process

moniacheli@tiscali.it wrote:

>I would like to use iptables to translate the source of IP datagrams 
>generated inside a router for some particular applications (such as 
>syslog: protocol UDP, destination port 514). I thought to use an 
>iptables rule defined by an OUTPUT chain (which let manipulate 
datagram 
>generated from local process) and by the target SNAT (which let to 
>translate ip source) -> iptables -t nat -A OUTPUT -p udp --dport 514 -
j 
>SNAT --to x.x.x.x. The problem is that the OUTPUT chain cannot be 
used 
>with the target SNAT!
>Has anybody any idea about which is the best and simplest way to get 
>the result described above?
>
>Thanks for Your collaboration.
>Monia Cheli
>
>
>
>
>		
>Tiscali ADSL 4 Mega Flat 
>
>Naviga senza limiti a 19,95 Euro al mese con 4 Megabps di velocita'. 
Attiva subito: hai 2 MESI di canone adsl GRATIS!
>
>In piu', se sei raggiunto dalla rete Tiscali, telefoni senza pagare 
il canone Telecom. 
>
>Scopri subito come risparmiare! 
>
>http://abbonati.tiscali.it/prodotti/adsl/tc/4flat/
>	
>
>  
>
You do SNAT in POSTROUTING. Local generated packets also enter
POSTROUTING. You may want to match source ip or .. you can mark 
packets
in mangle OUTPUT, and then SNAT in POSTROUTING matching only the mark
value with mark match.








		
Tiscali ADSL 4 Mega Flat 

Naviga senza limiti a 19,95 Euro al mese con 4 Megabps di velocita'. Attiva subito: hai 2 MESI di canone adsl GRATIS!

In piu', se sei raggiunto dalla rete Tiscali, telefoni senza pagare il canone Telecom. 

Scopri subito come risparmiare! 

http://abbonati.tiscali.it/prodotti/adsl/tc/4flat/
	

Re: Iptables SNAT for pkt generated by internal process

[Alexandru Dragoi]

moniacheli@tiscali.it wrote:

>I think I could use these commands:
>
>iptables -t mangle -A OUTPUT -p udp --dport 514 -j MARK --set-mark 13
>iptables -t nat -A POSTROUTING -- mark 13 -SNAT x.x.x.x
>
>I tried, but I had this problem on first command:
>"Couldn't load match `MARK':/lib//iptables/libipt_MARK.so: cannot open 
>shared object file: No such file or directory"
>
>Are the commands above rigth and is it sufficient to copy libipt_MARK.
>so into :/lib//iptables/ directory to solve my problem?
>
>Thanks a lot to Alexandru Dragoi
>
>Bye Monia
>
>----Messaggio originale----
>Da: alex@zoomnet.ro
>Data: 16/05/2006 13.00
>A: "moniacheli@tiscali.it"<moniacheli@tiscali.it>
>Cc: <netfilter@lists.netfilter.org>
>Ogg: Re: Iptables SNAT for pkt generated by internal process
>
>moniacheli@tiscali.it wrote:
>
>  
>
>>I would like to use iptables to translate the source of IP datagrams 
>>generated inside a router for some particular applications (such as 
>>syslog: protocol UDP, destination port 514). I thought to use an 
>>iptables rule defined by an OUTPUT chain (which let manipulate 
>>    
>>
>datagram 
>  
>
>>generated from local process) and by the target SNAT (which let to 
>>translate ip source) -> iptables -t nat -A OUTPUT -p udp --dport 514 -
>>    
>>
>j 
>  
>
>>SNAT --to x.x.x.x. The problem is that the OUTPUT chain cannot be 
>>    
>>
>used 
>  
>
>>with the target SNAT!
>>Has anybody any idea about which is the best and simplest way to get 
>>the result described above?
>>
>>Thanks for Your collaboration.
>>Monia Cheli
>>
>>
>>
>>
>>		
>>Tiscali ADSL 4 Mega Flat 
>>
>>Naviga senza limiti a 19,95 Euro al mese con 4 Megabps di velocita'. 
>>    
>>
>Attiva subito: hai 2 MESI di canone adsl GRATIS!
>  
>
>>In piu', se sei raggiunto dalla rete Tiscali, telefoni senza pagare 
>>    
>>
>il canone Telecom. 
>  
>
>>Scopri subito come risparmiare! 
>>
>>http://abbonati.tiscali.it/prodotti/adsl/tc/4flat/
>>	
>>
>> 
>>
>>    
>>
>You do SNAT in POSTROUTING. Local generated packets also enter
>POSTROUTING. You may want to match source ip or .. you can mark 
>packets
>in mangle OUTPUT, and then SNAT in POSTROUTING matching only the mark
>value with mark match.
>
>
>
>
>
>
>
>
>		
>Tiscali ADSL 4 Mega Flat 
>
>Naviga senza limiti a 19,95 Euro al mese con 4 Megabps di velocita'. Attiva subito: hai 2 MESI di canone adsl GRATIS!
>
>In piu', se sei raggiunto dalla rete Tiscali, telefoni senza pagare il canone Telecom. 
>
>Scopri subito come risparmiare! 
>
>http://abbonati.tiscali.it/prodotti/adsl/tc/4flat/
>	
>
>  
>
Try

iptables -t nat -A POSTROUTING -m mark --mark 13 -SNAT x.x.x.x

Iptables SNAT for pkt generated by internal process

[moniacheli]

I would like to use iptables to translate the source of IP datagrams 
generated inside a router for some particular applications (such as 
syslog: protocol UDP, destination port 514). I thought to use an 
iptables rule defined by an OUTPUT chain (which let manipulate datagram 
generated from local process) and by the target SNAT (which let to 
translate ip source) -> iptables -t nat -A OUTPUT -p udp --dport 514 -j 
SNAT --to x.x.x.x. The problem is that the OUTPUT chain cannot be used 
with the target SNAT!
Has anybody any idea about which is the best and simplest way to get 
the result described above?

Thanks for Your collaboration.
Monia Cheli




		
Tiscali ADSL 4 Mega Flat 

Naviga senza limiti a 19,95 Euro al mese con 4 Megabps di velocita'. Attiva subito: hai 2 MESI di canone adsl GRATIS!

In piu', se sei raggiunto dalla rete Tiscali, telefoni senza pagare il canone Telecom. 

Scopri subito come risparmiare! 

http://abbonati.tiscali.it/prodotti/adsl/tc/4flat/
	

Re: Iptables SNAT for pkt generated by internal process

[Alexandru Dragoi]

moniacheli@tiscali.it wrote:

>I would like to use iptables to translate the source of IP datagrams 
>generated inside a router for some particular applications (such as 
>syslog: protocol UDP, destination port 514). I thought to use an 
>iptables rule defined by an OUTPUT chain (which let manipulate datagram 
>generated from local process) and by the target SNAT (which let to 
>translate ip source) -> iptables -t nat -A OUTPUT -p udp --dport 514 -j 
>SNAT --to x.x.x.x. The problem is that the OUTPUT chain cannot be used 
>with the target SNAT!
>Has anybody any idea about which is the best and simplest way to get 
>the result described above?
>
>Thanks for Your collaboration.
>Monia Cheli
>
>
>
>
>		
>Tiscali ADSL 4 Mega Flat 
>
>Naviga senza limiti a 19,95 Euro al mese con 4 Megabps di velocita'. Attiva subito: hai 2 MESI di canone adsl GRATIS!
>
>In piu', se sei raggiunto dalla rete Tiscali, telefoni senza pagare il canone Telecom. 
>
>Scopri subito come risparmiare! 
>
>http://abbonati.tiscali.it/prodotti/adsl/tc/4flat/
>	
>
>  
>
You do SNAT in POSTROUTING. Local generated packets also enter 
POSTROUTING. You may want to match source ip or .. you can mark packets 
in mangle OUTPUT, and then SNAT in POSTROUTING matching only the mark 
value with mark match.

Re: Iptables SNAT for pkt generated by internal process

[Alexandru Dragoi]

moniacheli@tiscali.it wrote:

>I would like to use iptables to translate the source of IP datagrams 
>generated inside a router for some particular applications (such as 
>syslog: protocol UDP, destination port 514). I thought to use an 
>iptables rule defined by an OUTPUT chain (which let manipulate datagram 
>generated from local process) and by the target SNAT (which let to 
>translate ip source) -> iptables -t nat -A OUTPUT -p udp --dport 514 -j 
>SNAT --to x.x.x.x. The problem is that the OUTPUT chain cannot be used 
>with the target SNAT!
>Has anybody any idea about which is the best and simplest way to get 
>the result described above?
>
>Thanks for Your collaboration.
>Monia Cheli
>
>
>
>
>		
>Tiscali ADSL 4 Mega Flat 
>
>Naviga senza limiti a 19,95 Euro al mese con 4 Megabps di velocita'. Attiva subito: hai 2 MESI di canone adsl GRATIS!
>
>In piu', se sei raggiunto dalla rete Tiscali, telefoni senza pagare il canone Telecom. 
>
>Scopri subito come risparmiare! 
>
>http://abbonati.tiscali.it/prodotti/adsl/tc/4flat/
>	
>
>  
>
You do SNAT in POSTROUTING. Local generated packets also enter
POSTROUTING. You may want to match source ip or .. you can mark packets
in mangle OUTPUT, and then SNAT in POSTROUTING matching only the mark
value with mark match.