Linux Netfilter discussions
 help / color / mirror / Atom feed
* access to terminal server in DMZ with 2 isp
@ 2009-10-20 17:40 alfredo
  2009-10-20 17:56 ` Gary Smith
  2009-10-23 10:22 ` Vlado Drz(ík
  0 siblings, 2 replies; 3+ messages in thread
From: alfredo @ 2009-10-20 17:40 UTC (permalink / raw)
  To: netfilter

I have been trying to configure access to a terminal server from several 
days without any luck. I have two routers from 2 diferrent isp

(called ono and neo) with a range of public in each. I want to access my 
terminal server from internet from each isp, so as if one is down I

can use the other one.


  /-------\  neo(isp1)  eth1 +----------+
 /         \            +----+          | 
+-----------------+
/ Internet |------------|    | Firewall |---eth0-+-- DMZ -| Terminal Server 
|
\          /            +----+          | 
+-----------------+
 \--------/  ono (isp2) eth2 +----------+


IP1 is the public ip of eth1
P1 is the ip of the neo's router
IP2 is the public ip of eth2
P2 is the ip of the ono's router


My script to configure the firewall is as follows:
#eth0 -> Internal network (DMZ) 192.168.0.0/24
#eth1 -> Neo (First ISP)
#eth2 -> Ono (Second ISP)
set -x#Script:

                echo 255 local > /etc/iproute2/rt_tables
                echo 254 main >> /etc/iproute2/rt_tables
                echo 253 default >> /etc/iproute2/rt_tables
                echo 0 unspec >> /etc/iproute2/rt_tables
                echo 200 neo >> /etc/iproute2/rt_tables
                echo 201 ono >> /etc/iproute2/rt_tables

                iptables -F
                iptables -t nat -F
                iptables -t mangle -F

                # neo
                IP1="213.172.XXXX"
                P1_NET="213.172.XXXX/29"
                P1="213.172.XXXX"
                IF1="eth1"

                # ono
                IP2="84.124.XXXXX"
                P2_NET="84.124.87.224/29"
                P2="84.124.XXXX"
                IF2="eth2"
                IP0="192.168.0.249"
                P0_NET="192.168.0.0/24"
                #P0=
                IF2="eth0"

                ip route add $P2_NET dev $IF2 src $IP2 table ono
                ip route add default via $P2 table ono
                ip route add $P1_NET dev $IF1 src $IP1 table neo
                ip route add default via $P1 table neo
                ip route add $P1_NET dev $IF1 src $IP1
                ip route add $P2_NET dev $IF2 src $IP2
                ip route add default via $P1
                ip route add $P0_NET     dev $IF0 table neo
                ip route add $P2_NET     dev $IF2 table neo
                ip route add 127.0.0.0/8 dev lo   table neo
                ip route add $P0_NET     dev $IF0 table ono
                ip route add $P1_NET     dev $IF1 table ono
                ip route add 127.0.0.0/8 dev lo   table ono


                ip rule add fwmark 2 table ono
                ip rule add fwmark 1 table neo
                ip rule add from $IP2 table ono
                ip rule add from $IP1 table neo
                # -----------
                echo 1 > /proc/sys/net/ipv4/ip_forward
                iptables -F
                iptables -t nat -F
                iptables -t mangle -F

                #iptables -t mangle -A PREROUTING -m conntrack --ctstate 
DNAT --ctorigdst $IP1 -j MARK --set-mark 1
                #iptables -t mangle -A PREROUTING -m conntrack --ctstate 
DNAT --ctorigdst $IP2 -j MARK --set-mark 2
                iptables -t mangle -A PREROUTING -m conntrack --ctorigdst 
$IP1 -j MARK --set-mark 1
                iptables -t mangle -A PREROUTING -m conntrack --ctorigdst 
$IP2 -j MARK --set-mark 2

                # Habilito el NAT para que la red interna pueda salir
                iptables -t nat -A POSTROUTING -o $IF1 -s $P0_NET -d 
0.0.0.0/0 -j SNAT --to $IP1
                iptables -t nat -A POSTROUTING -o $IF2 -s $P0_NET -d 
0.0.0.0/0 -j SNAT --to $IP2
                #iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -d 
0.0.0.0/0  -j MASQUERADE
                # Redirecciono el puerto de las publicas a la privada
                iptables -A PREROUTING -t nat -p tcp -i eth2 --dport 3389 -j 
DNAT --to 192.168.0.118:3389
                iptables -A PREROUTING -t nat -p tcp -i eth1 --dport 3389 -j 
DNAT --to 192.168.0.118:3389
                #iptables -A PREROUTING -t nat -p tcp --dport 3389 -j 
DNAT --to 192.168.0.118:3389
                #iptables -A PREROUTING -t nat -p tcp --dport 6000 -j 
DNAT --to 192.168.0.118:6666

When I try to connect from outside to each of my isps, for example ono, I 
see packets entering eth2 and then
going out eth2 immediately without being routed to eth0.
I see dnat has changed the destination ip so packets go out eth2 having the 
source ip from which I'm connecting from (not the ip of the

adapter) and destination ip 192.168.0.118 (the internal server) but through 
the wrong interface.
These packets should have being sent by eth0 and not eth2. If I connect to 
the other isp, neo, it's the same but packets going out eth1
 instead of eth0.
Any suggestions? 



^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-10-23 10:22 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-10-20 17:40 access to terminal server in DMZ with 2 isp alfredo
2009-10-20 17:56 ` Gary Smith
2009-10-23 10:22 ` Vlado Drz(ík

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox