From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ@public.gmane.org
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: [Bug 108980] New: GF117: MMIO write of 0000001f FAULT at 6013d4 [ IBUS ]
Date: Sat, 08 Dec 2018 14:49:13 +0000 [thread overview]
Message-ID: <bug-108980-8800@http.bugs.freedesktop.org/> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 6639 bytes --]
https://bugs.freedesktop.org/show_bug.cgi?id=108980
Bug ID: 108980
Summary: GF117: MMIO write of 0000001f FAULT at 6013d4 [ IBUS ]
Product: xorg
Version: unspecified
Hardware: x86-64 (AMD64)
OS: Linux (All)
Status: NEW
Severity: normal
Priority: medium
Component: Driver/nouveau
Assignee: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Reporter: adamos-zBjOIweZRQ4nvi+hAk5376sMm+1xrEX8@public.gmane.org
QA Contact: xorg-team-go0+a7rfsptAfugRpC6u6w@public.gmane.org
Kernel 4.10 and next, till the last:
# dmesg | grep nouveau
[ 15.161745] nouveau: detected PR support, will not use DSM
[ 15.163013] nouveau 0000:08:00.0: enabling device (0006 -> 0007)
[ 15.164408] nouveau 0000:08:00.0: NVIDIA GF117 (0d7000a2)
[ 15.186628] nouveau 0000:08:00.0: bios: version 75.17.86.00.04
[ 15.271378] nouveau 0000:08:00.0: fb: 2048 MiB DDR3
[ 15.289248] nouveau 0000:08:00.0: volt: couldn't find speedo value, volting
not possible
[ 15.289262] nouveau 0000:08:00.0: bus: MMIO write of 0000001f FAULT at
6013d4 [ IBUS ]
[ 15.935388] nouveau 0000:08:00.0: DRM: VRAM: 2048 MiB
[ 15.936749] nouveau 0000:08:00.0: DRM: GART: 1048576 MiB
[ 15.938436] nouveau 0000:08:00.0: DRM: Pointer to TMDS table invalid
[ 15.939583] nouveau 0000:08:00.0: DRM: DCB version 4.0
[ 15.942999] nouveau 0000:08:00.0: DRM: MM: using COPY0 for buffer copies
[ 15.944156] [drm] Initialized nouveau 1.3.1 20120801 for 0000:08:00.0 on
minor 1
Before kernel 4.10.x
(in this example 4.9.140):
# dmesg | grep nouveau
[ 15.755065] nouveau: detected PR support, will not use DSM
[ 15.756863] nouveau 0000:08:00.0: enabling device (0006 -> 0007)
[ 15.758852] nouveau 0000:08:00.0: NVIDIA GF117 (0d7000a2)
[ 15.785141] nouveau 0000:08:00.0: bios: version 75.17.86.00.04
[ 15.868828] nouveau 0000:08:00.0: fb: 2048 MiB DDR3
[ 16.510223] nouveau 0000:08:00.0: DRM: VRAM: 2048 MiB
[ 16.510227] nouveau 0000:08:00.0: DRM: GART: 1048576 MiB
[ 16.510232] nouveau 0000:08:00.0: DRM: Pointer to TMDS table invalid
[ 16.510236] nouveau 0000:08:00.0: DRM: DCB version 4.0
[ 16.510240] nouveau 0000:08:00.0: DRM: Pointer to flat panel table invalid
[ 16.640514] nouveau 0000:08:00.0: DRM: MM: using COPY0 for buffer copies
[ 16.640527] [drm] Initialized nouveau 1.3.1 20120801 for 0000:08:00.0 on
minor 1
[ 22.007459] nouveau 0000:08:00.0: DRM: evicting buffers...
[ 22.008617] nouveau 0000:08:00.0: DRM: waiting for kernel channels to go
idle...
[ 22.009842] nouveau 0000:08:00.0: DRM: suspending client object trees...
[ 22.011334] nouveau 0000:08:00.0: DRM: suspending kernel object tree...
Hardware:
Dell Inspiron 3542 (0652).
# lspci -vvv
08:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/810M/820M /
GT 620M/625M/630M/720M] (rev a1)
Subsystem: Dell GeForce 820M
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at f6000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at d000 [size=128]
Expansion ROM at f7000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee003b8 Data: 0000
Capabilities: [78] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
unlimited, L1 <64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
SlotPowerLimit 25.000W
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Exit
Latency L0s <512ns, L1 <4us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF
Not Supported
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-,
OBFF Disabled
AtomicOpsCtl: ReqEn-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [128 v1] Power Budgeting <?>
Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1
Len=024 <?>
Kernel driver in use: nouveau
Kernel modules: nouveau
Distribution: Fedora, Gentoo
--
You are receiving this mail because:
You are the assignee for the bug.
[-- Attachment #1.2: Type: text/html, Size: 7980 bytes --]
[-- Attachment #2: Type: text/plain, Size: 154 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/nouveau
next reply other threads:[~2018-12-08 14:49 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-08 14:49 bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ [this message]
[not found] ` <bug-108980-8800-V0hAGp6uBxMKqLRl/0Ahz6D7qz1kEfGD2LY78lusg7I@public.gmane.org/>
2018-12-08 17:07 ` [Bug 108980] GF117: MMIO write of 0000001f FAULT at 6013d4 [ IBUS ] bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2018-12-08 18:19 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2018-12-09 4:02 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2018-12-09 4:04 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2018-12-09 4:59 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2018-12-09 9:19 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2018-12-09 15:35 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2018-12-09 17:03 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2018-12-12 2:43 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2018-12-12 18:12 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2018-12-13 4:08 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2018-12-13 4:55 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2018-12-13 18:09 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2018-12-13 18:14 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2018-12-13 18:19 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2019-04-21 6:00 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2019-09-03 16:20 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2019-12-04 9:47 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-108980-8800@http.bugs.freedesktop.org/ \
--to=bugzilla-daemon-cc+yj3umiyqdupfqwhejaq@public.gmane.org \
--cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox