From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ@public.gmane.org
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: [Bug 38074] Dual head doesn't work for some combination of monitors (second screen still off)
Date: Tue, 20 Dec 2011 16:20:04 +0000 [thread overview]
Message-ID: <bug-38074-8800-i4uiWaTRRs@http.bugs.freedesktop.org/> (raw)
In-Reply-To: <bug-38074-8800-V0hAGp6uBxMKqLRl/0Ahz6D7qz1kEfGD2LY78lusg7I@public.gmane.org/>
https://bugs.freedesktop.org/show_bug.cgi?id=38074
--- Comment #16 from Luzipher <luziphermcleod-CVfgzVlYcRg@public.gmane.org> 2011-12-20 08:20:04 PST ---
No, 1280x1024 doesn't work as well (same result: I can move the mouse there but
the screen stays black and enters power save).
Commands used:
xrandr --output DVI-D-1 --set "scaling mode" "None"
xrandr --output DVI-D-1 --right-of LVDS-1 --mode 0xa7
Outputs:
## xrandr --verbose (only for DVI-D-1, after setting scaling mode to none) ##
DVI-D-1 connected (normal left inverted right x axis y axis)
Identifier: 0x94
Timestamp: 615302
Subpixel: unknown
Clones:
CRTCs: 0 1
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
EDID:
00ffffffffffff0010ac2ea053324b30
1e12010380342078eeee91a3544c9926
0f5054a54b00714f8180a94001010101
010101010101283c80a070b023403020
360006442100001a000000ff00473237
344838374f304b325320000000fc0044
454c4c20453234385746500a000000fd
00384c1e5311000a2020202020200037
dithering: Off
supported: Off On Automatic
scaling mode: None
supported: None Full Center Full aspect
1920x1200 (0xa4) 154.0MHz +HSync -VSync +preferred
h: width 1920 start 1968 end 2000 total 2080 skew 0 clock 74.0KHz
v: height 1200 start 1203 end 1209 total 1235 clock 60.0Hz
1600x1200 (0xa5) 162.0MHz +HSync +VSync
h: width 1600 start 1664 end 1856 total 2160 skew 0 clock 75.0KHz
v: height 1200 start 1201 end 1204 total 1250 clock 60.0Hz
1280x1024 (0xa6) 135.0MHz +HSync +VSync
h: width 1280 start 1296 end 1440 total 1688 skew 0 clock 80.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 75.0Hz
1280x1024 (0xa7) 108.0MHz +HSync +VSync
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1152x864 (0xa8) 108.0MHz +HSync +VSync
h: width 1152 start 1216 end 1344 total 1600 skew 0 clock 67.5KHz
v: height 864 start 865 end 868 total 900 clock 75.0Hz
1024x768 (0xa9) 78.8MHz +HSync +VSync
h: width 1024 start 1040 end 1136 total 1312 skew 0 clock 60.1KHz
v: height 768 start 769 end 772 total 800 clock 75.1Hz
1024x768 (0xaa) 65.0MHz -HSync -VSync
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
800x600 (0xab) 49.5MHz +HSync +VSync
h: width 800 start 816 end 896 total 1056 skew 0 clock 46.9KHz
v: height 600 start 601 end 604 total 625 clock 75.0Hz
800x600 (0xac) 40.0MHz +HSync +VSync
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
640x480 (0xad) 31.5MHz -HSync -VSync
h: width 640 start 656 end 720 total 840 skew 0 clock 37.5KHz
v: height 480 start 481 end 484 total 500 clock 75.0Hz
640x480 (0xae) 25.2MHz -HSync -VSync
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 60.0Hz
720x400 (0xaf) 28.3MHz -HSync +VSync
h: width 720 start 738 end 846 total 900 skew 0 clock 31.5KHz
v: height 400 start 412 end 414 total 449 clock 70.1Hz
## xrandr after second command ##
DVI-D-1 connected 1280x1024+1920+0 (normal left inverted right x axis y axis)
518mm x 324mm
1920x1200 60.0 +
1600x1200 60.0
1280x1024 75.0 60.0*
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
--
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug.
next prev parent reply other threads:[~2011-12-20 16:20 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-08 14:30 [Bug 38074] New: Dual head doesn't work for some combination of monitors (second screen still off) bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
[not found] ` <bug-38074-8800-V0hAGp6uBxMKqLRl/0Ahz6D7qz1kEfGD2LY78lusg7I@public.gmane.org/>
2011-06-08 14:35 ` [Bug 38074] " bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-06-08 14:46 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-06-08 14:53 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-07-27 16:03 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-07-27 23:09 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-07-28 16:33 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-07-28 17:21 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-07-28 17:30 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-07-28 19:19 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-07-28 22:56 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-07-29 12:15 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-07-29 12:18 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-07-29 12:36 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-07-29 12:39 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-12-19 11:41 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-12-20 8:54 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-12-20 12:05 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2011-12-20 16:20 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ [this message]
2013-08-19 16:40 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2013-08-27 14:40 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2013-08-27 14:43 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2013-08-27 14:44 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2013-08-27 14:44 ` [Bug 38074] [NV96] " bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2013-08-27 17:58 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2013-08-27 18:01 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2013-10-01 16:11 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2013-10-04 12:14 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2013-11-11 21:25 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2014-02-05 6:51 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-04-21 14:44 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-04-21 14:45 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-04-21 14:46 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-04-21 14:53 ` [Bug 38074] [NV96] Dual head doesn't work for some combination of Dual DVI connected " bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-04-21 14:53 ` [Bug 38074] [NV96] Dual head doesn't work for some combination of " bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-04-21 15:10 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2015-09-09 12:09 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2016-06-28 14:10 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
2019-12-04 8:26 ` bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-38074-8800-i4uiWaTRRs@http.bugs.freedesktop.org/ \
--to=bugzilla-daemon-cc+yj3umiyqdupfqwhejaq@public.gmane.org \
--cc=nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox