Open Source Telephony
 help / color / mirror / Atom feed
* Problem configuring Longsung U6300
@ 2011-01-21 16:26 =?unknown-8bit?b?0JLRj9GH0LXRgdC70LDQsiDQmtGA0L7Rgg==?=
  2011-01-24 14:48 ` =?unknown-8bit?b?0JLRj9GH0LXRgdC70LDQsiDQmtGA0L7Rgg==?=
  0 siblings, 1 reply; 3+ messages in thread
From: =?unknown-8bit?b?0JLRj9GH0LXRgdC70LDQsiDQmtGA0L7Rgg==?= @ 2011-01-21 16:26 UTC (permalink / raw)
  To: ofono

[-- Attachment #1: Type: text/plain, Size: 405 bytes --]

Hello, all.
I have a little question - which driver should I use for modem Longsung
U6300 based on Qualcomm MSM6290? I know that Huawei uses qualcomm chips,
so I tried to add udev rule like for huawei modem, but it did not work.
list-modes shows modem (online=0, powered=0, lockdown=0), but
enable-modem fails  with timeout exception. vendorId - 1c9e, productId -
9603.
Could you help me, please?

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: Problem configuring Longsung U6300
  2011-01-21 16:26 Problem configuring Longsung U6300 =?unknown-8bit?b?0JLRj9GH0LXRgdC70LDQsiDQmtGA0L7Rgg==?=
@ 2011-01-24 14:48 ` =?unknown-8bit?b?0JLRj9GH0LXRgdC70LDQsiDQmtGA0L7Rgg==?=
  2011-01-24 15:14   ` Marcel Holtmann
  0 siblings, 1 reply; 3+ messages in thread
From: =?unknown-8bit?b?0JLRj9GH0LXRgdC70LDQsiDQmtGA0L7Rgg==?= @ 2011-01-24 14:48 UTC (permalink / raw)
  To: ofono

[-- Attachment #1: Type: text/plain, Size: 687 bytes --]

21.01.2011 18:26, Вячеслав Крот пишет:
> Hello, all.
> I have a little question - which driver should I use for modem Longsung
> U6300 based on Qualcomm MSM6290? I know that Huawei uses qualcomm chips,
> so I tried to add udev rule like for huawei modem, but it did not work.
> list-modes shows modem (online=0, powered=0, lockdown=0), but
> enable-modem fails  with timeout exception. vendorId - 1c9e, productId -
> 9603.
> Could you help me, please?
> _______________________________________________
> ofono mailing list
> ofono(a)ofono.org
> http://lists.ofono.org/listinfo/ofono
>
>   
On irc channel ZTE driver was proposed and it works quite good.

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: Problem configuring Longsung U6300
  2011-01-24 14:48 ` =?unknown-8bit?b?0JLRj9GH0LXRgdC70LDQsiDQmtGA0L7Rgg==?=
@ 2011-01-24 15:14   ` Marcel Holtmann
  0 siblings, 0 replies; 3+ messages in thread
From: Marcel Holtmann @ 2011-01-24 15:14 UTC (permalink / raw)
  To: ofono

[-- Attachment #1: Type: text/plain, Size: 1175 bytes --]

Hi,

> > I have a little question - which driver should I use for modem Longsung
> > U6300 based on Qualcomm MSM6290? I know that Huawei uses qualcomm chips,
> > so I tried to add udev rule like for huawei modem, but it did not work.
> > list-modes shows modem (online=0, powered=0, lockdown=0), but
> > enable-modem fails  with timeout exception. vendorId - 1c9e, productId -
> > 9603.
> > Could you help me, please?
> >   
> On irc channel ZTE driver was proposed and it works quite good.

we can either re-use ZTE driver or write a new one for these. However
until I have access to these devices it becomes pretty hard.

I tried to buy some of these while being in Japan last time, but they
always try to tie you into contracts. We do have a proper collection for
North America and European specific models, but I do like to get a set
of Asian examples. So if anybody wants to donate some of these, please
let us know.

Adding support for these dongles is pretty simple once you figured out
their quirks since all Qualcomm ones are broken one way or another. They
all use outdated firmware. At least that is my experience.

Regards

Marcel



^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2011-01-24 15:14 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-01-21 16:26 Problem configuring Longsung U6300 =?unknown-8bit?b?0JLRj9GH0LXRgdC70LDQsiDQmtGA0L7Rgg==?=
2011-01-24 14:48 ` =?unknown-8bit?b?0JLRj9GH0LXRgdC70LDQsiDQmtGA0L7Rgg==?=
2011-01-24 15:14   ` Marcel Holtmann

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox