Open Source Telephony
 help / color / mirror / Atom feed
From: Clayton Craft <clayton@craftyguy.net>
To: ofono@ofono.org
Subject: Re: [PATCH 1/1] udev: set driver for serial drivers
Date: Fri, 08 Sep 2017 08:25:31 -0700	[thread overview]
Message-ID: <20170908152531.GA3@computer.craftyguy.net> (raw)
In-Reply-To: <20170908080717.4441-1-jonas@southpole.se>

[-- Attachment #1: Type: text/plain, Size: 3510 bytes --]

Hi Jonas,
I applied the patch below after the first patch, looks like I inched
ahead a little further but something is still causing udevng to give
up and tear everything down (output clipped to include only changes
from the last attempt before this patch):

ofonod[10523]: plugins/udevng.c:udev_start()
ofonod[10523]: plugins/udevng.c:enumerate_devices()
ofonod[10523]: plugins/udevng.c:add_serial_device() Device is missing required OFONO_DRIVER property
ofonod[10523]: plugins/udevng.c:add_serial_device() Device is missing required OFONO_DRIVER property
ofonod[10523]: plugins/udevng.c:add_serial_device() /sys/devices/platform/68000000.ocp/48058000.ssi-controller/ssi0/port0/n900-modem
ofonod[10523]: plugins/udevng.c:add_serial_device() /devices/platform/68000000.ocp/48058000.ssi-controller/ssi0/port0/n900-modem
ofonod[10523]: plugins/udevng.c:add_serial_device() (null) (n900)
ofonod[10523]: plugins/udevng.c:add_serial_device() Device is missing required OFONO_DRIVER property
ofonod[10523]: plugins/udevng.c:add_serial_device() Device is missing required OFONO_DRIVER property
ofonod[10523]: plugins/udevng.c:add_serial_device() Device is missing required OFONO_DRIVER property
ofonod[10523]: plugins/udevng.c:add_serial_device() Device is missing required OFONO_DRIVER property
....
this repeats a lot
...
ofonod[10523]: plugins/udevng.c:add_serial_device() Device is missing required OFONO_DRIVER property
ofonod[10523]: plugins/udevng.c:add_serial_device() Device is missing required OFONO_DRIVER property
ofonod[10523]: plugins/udevng.c:add_serial_device() Device is missing required OFONO_DRIVER property
ofonod[10523]: plugins/udevng.c:create_modem() /sys/devices/platform/68000000.ocp/48058000.ssi-controller/ssi0/port0/n900-modem
ofonod[10523]: plugins/udevng.c:create_modem() driver=n900
ofonod[10523]: src/modem.c:ofono_modem_create() name: (null), type: n900
ofonod[10523]: plugins/udevng.c:destroy_modem() /sys/devices/platform/68000000.ocp/48058000.ssi-controller/ssi0/port0/n900-modem
ofonod[10523]: src/modem.c:ofono_modem_remove() 0x64f0b0
ofonod[10523]: src/private-network.c:ofono_private_network_driver_register() driver: 0x635334, name: Example Private Network Driver


-Clayton



On Fri, Sep 08, 2017 at 10:07:17AM +0200, Jonas Bonn wrote:
>The switch away from udev.c to udevng.c for serial modems ended up
>having a hardcoded driver "legacy" set on them.  This breaks as the
>setup routine for the device will never be found this way.  This patch
>sets the correct driver for the device.
>---
>Hi Clayton,
>
>Here's another patch that hopefully gets the N900 a bit further down
>the road to initialization.  Apply this _on top of_ the earlier patch
>I sent you; they are both needed.
>
>Cheers,
>Jonas
>
> plugins/udevng.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
>diff --git a/plugins/udevng.c b/plugins/udevng.c
>index 241fcda..5767259 100644
>--- a/plugins/udevng.c
>+++ b/plugins/udevng.c
>@@ -1335,7 +1335,7 @@ static void add_serial_device(struct udev_device *dev)
> 		modem->type = MODEM_TYPE_SERIAL;
> 		modem->syspath = g_strdup(syspath);
> 		modem->devname = g_strdup(devname);
>-		modem->driver = g_strdup("legacy");
>+		modem->driver = g_strdup(driver);
>
> 		g_hash_table_replace(modem_list, modem->syspath, modem);
> 	}
>-- 
>2.9.3
>
>_______________________________________________
>ofono mailing list
>ofono(a)ofono.org
>https://lists.ofono.org/mailman/listinfo/ofono


      reply	other threads:[~2017-09-08 15:25 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-09-08  0:51 nokia-modem (N900) not detected after migration to udevng Clayton Craft
2017-09-08  1:13 ` Jonas Bonn
2017-09-08  1:17   ` Clayton Craft
2017-09-08  1:29     ` Jonas Bonn
2017-09-08  1:38       ` Clayton Craft
2017-09-08  2:12         ` Jonas Bonn
2017-09-09  3:09           ` Clayton Craft
2017-09-09  8:56             ` [PATCH 1/1] udev: add serial_info struct to modem Jonas Bonn
2017-09-09  9:05               ` Jonas Bonn
2017-09-09 17:40                 ` Clayton Craft
2017-09-09 17:58           ` nokia-modem (N900) not detected after migration to udevng Clayton Craft
2017-09-09 18:29             ` Denis Kenzior
2017-09-09 18:43               ` Clayton Craft
2017-09-09 20:34               ` Clayton Craft
2017-09-10 16:41                 ` [PATCH 1/1] isimodem: Use correct callback for pin status Clayton Craft
2017-09-10 17:47                   ` Denis Kenzior
2017-09-10 18:41                     ` Clayton Craft
2017-09-11 15:37                       ` Denis Kenzior
2017-09-11 15:44               ` nokia-modem (N900) not detected after migration to udevng Clayton Craft
2017-09-11 18:49                 ` Denis Kenzior
2017-09-11 19:54                   ` Clayton Craft
2017-09-12  7:51                     ` Jonas Bonn
2017-09-12  8:11                       ` [PATCH 1/2] udev: fixes for detection of non-USB modems Jonas Bonn
2017-09-12  8:11                         ` [PATCH 2/2] udev: isi modems do not use 'Device' property Jonas Bonn
2017-09-12 17:28                         ` [PATCH 1/2] udev: fixes for detection of non-USB modems Denis Kenzior
2017-09-08  3:17         ` [PATCH 1/1] udev: devnode is not a required modem property Jonas Bonn
2017-09-08  6:06           ` Clayton Craft
2017-09-08  8:07             ` [PATCH 1/1] udev: set driver for serial drivers Jonas Bonn
2017-09-08 15:25               ` Clayton Craft [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170908152531.GA3@computer.craftyguy.net \
    --to=clayton@craftyguy.net \
    --cc=ofono@ofono.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox