* [PATCH] busybox: sync do_install() with oe master (mostly)
@ 2011-05-24 13:13 Phil Blundell
2011-05-26 10:08 ` [PATCH v2] " Phil Blundell
0 siblings, 1 reply; 4+ messages in thread
From: Phil Blundell @ 2011-05-24 13:13 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
This is basically a backport of the current state of the art from the
openembedded master repo. In particular this fixes an installation
error on micro:
| + cp -dPr /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/bin /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/sbin /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/
| cp: will not create hard link `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/image/bin' to directory `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/bin'
| cp: cannot copy a directory, `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image', into itself, `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/image'
| ERROR: Function 'do_install' failed (see /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/temp/log.do_install.3808 for further information)
Signed-off-by: Phil Blundell <philb@gnu.org>
---
meta/recipes-core/busybox/busybox.inc | 100 ++++++++++++++++++---------------
1 files changed, 54 insertions(+), 46 deletions(-)
diff --git a/meta/recipes-core/busybox/busybox.inc b/meta/recipes-core/busybox/busybox.inc
index 341c5c4..dd763fd 100644
--- a/meta/recipes-core/busybox/busybox.inc
+++ b/meta/recipes-core/busybox/busybox.inc
@@ -46,75 +46,83 @@ do_compile() {
}
do_install () {
- unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
+ oe_runmake busybox.links
+ if [ "${prefix}" != "/usr" ]; then
+ sed "s:^/usr/:${prefix}/:" busybox.links > busybox.links.new
+ mv busybox.links.new busybox.links
+ fi
+ if [ "${base_sbindir}" != "/sbin" ]; then
+ sed "s:^/sbin/:${base_sbindir}/:" busybox.links > busybox.links.new
+ mv busybox.links.new busybox.links
+ fi
+
install -d ${D}${sysconfdir}/init.d
- oe_runmake "PREFIX=${D}" install
- cp -pPR ${S}/_install/* ${D}/
-
- # Move everything to /busybox (not supposed to end up in any package)
- install -d ${D}/busybox
- ls ${D} -R
-
- cp -dPr ${D}${base_bindir} ${D}${base_sbindir} ${D}${prefix} ${D}/busybox/
- # Move the busybox binary back to /bin
- install -d ${D}${base_bindir}
- mv ${D}/busybox${base_bindir}/busybox ${D}${base_bindir}/
- # Move back the sh symlink
- test -h ${D}/busybox${base_bindir}/sh && mv ${D}/busybox${base_bindir}/sh ${D}${base_bindir}/
-
- install -m 0755 ${WORKDIR}/syslog ${D}${sysconfdir}/init.d/syslog.${PN}
- install -m 644 ${WORKDIR}/syslog.conf ${D}${sysconfdir}/syslog.conf.${PN}
- if grep "CONFIG_CROND=y" ${WORKDIR}/defconfig; then
- # Move crond back to /usr/sbin/crond
- install -d ${D}${sbindir}
- mv ${D}/busybox${sbindir}/crond ${D}${sbindir}/
+ if ! grep -q "CONFIG_FEATURE_INDIVIDUAL=y" ${WORKDIR}/defconfig; then
+ # Install /bin/busybox, and the /bin/sh link so the postinst script
+ # can run. Let update-alternatives handle the rest.
+ install -d ${D}${base_bindir}
+ if grep -q "CONFIG_FEATURE_SUID=y" ${WORKDIR}/defconfig; then
+ install -m 4755 ${S}/busybox ${D}${base_bindir}
+ else
+ install -m 0755 ${S}/busybox ${D}${base_bindir}
+ fi
+ ln -sf busybox ${D}${base_bindir}/sh
+ else
+ install -d ${D}${base_bindir} ${D}${base_sbindir}
+ install -d ${D}${libdir} ${D}${bindir} ${D}${sbindir}
+ cat busybox.links | while read FILE; do
+ NAME=`basename "$FILE"`
+ install -m 0755 "0_lib/$NAME" "${D}$FILE.${PN}"
+ done
+ # add suid bit where needed
+ for i in `grep -E "APPLET.*_BB_SUID_((MAYBE|REQUIRE))" include/applets.h | grep -v _BB_SUID_DROP | cut -f 3 -d '(' | cut -f 1 -d ','`; do
+ find ${D} -name $i.${PN} -exec chmod a+s {} \;
+ done
+ install -m 0755 0_lib/libbusybox.so.${PV} ${D}${libdir}/libbusybox.so.${PV}
+ ln -sf sh.${PN} ${D}${base_bindir}/sh
+ ln -sf ln.${PN} ${D}${base_bindir}/ln
+ ln -sf test.${PN} ${D}${bindir}/test
+ if [ -f ${D}/linuxrc.${PN} ]; then
+ mv ${D}/linuxrc.${PN} ${D}/linuxrc
+ fi
+ fi
+
+ if grep -q "CONFIG_SYSLOGD=y" ${WORKDIR}/defconfig; then
+ install -m 0755 ${WORKDIR}/syslog ${D}${sysconfdir}/init.d/syslog.${PN}
+ install -m 644 ${WORKDIR}/syslog.conf ${D}${sysconfdir}/syslog.conf.${PN}
+ fi
+ if grep "CONFIG_CROND=y" ${WORKDIR}/defconfig; then
install -m 0755 ${WORKDIR}/busybox-cron ${D}${sysconfdir}/init.d/
fi
if grep "CONFIG_HTTPD=y" ${WORKDIR}/defconfig; then
- # Move httpd back to /usr/sbin/httpd
- install -d ${D}${sbindir}
- mv ${D}/busybox${sbindir}/httpd ${D}${sbindir}/
-
install -m 0755 ${WORKDIR}/busybox-httpd ${D}${sysconfdir}/init.d/
install -d ${D}/srv/www
fi
if grep "CONFIG_UDHCPD=y" ${WORKDIR}/defconfig; then
- # Move udhcpd back to /usr/sbin/udhcpd
- install -d ${D}${sbindir}
- mv ${D}/busybox${sbindir}/udhcpd ${D}${sbindir}/
-
install -m 0755 ${WORKDIR}/busybox-udhcpd ${D}${sysconfdir}/init.d/
fi
if grep "CONFIG_HWCLOCK=y" ${WORKDIR}/defconfig; then
- # Move hwclock back to /sbin/hwclock
- install -d ${D}${base_sbindir}
- mv ${D}/busybox${base_sbindir}/hwclock ${D}${base_sbindir}/
-
+ install -d ${D}${sysconfdir}/default
install -m 0755 ${WORKDIR}/hwclock.sh ${D}${sysconfdir}/init.d/
fi
if grep "CONFIG_UDHCPC=y" ${WORKDIR}/defconfig; then
- # Move dhcpc back to /usr/sbin/udhcpc
- install -d ${D}${base_sbindir}
- mv ${D}/busybox${base_sbindir}/udhcpc ${D}${base_sbindir}/
-
install -d ${D}${sysconfdir}/udhcpc.d
install -d ${D}${datadir}/udhcpc
- install -m 0755 ${S}/examples/udhcp/simple.script ${D}${sysconfdir}/udhcpc.d/50default
+ install -m 0755 ${WORKDIR}/simple.script ${D}${sysconfdir}/udhcpc.d/50default
install -m 0755 ${WORKDIR}/default.script ${D}${datadir}/udhcpc/default.script
- install -m 0755 ${WORKDIR}/busybox-udhcpc ${D}${sysconfdir}/init.d/
fi
- if grep "CONFIG_MDEV=y" ${WORKDIR}/defconfig; then
- install -m 0755 ${WORKDIR}/mdev ${D}${sysconfdir}/init.d/mdev
- if grep "CONFIG_FEATURE_MDEV_CONF=y" ${WORKDIR}/defconfig; then
- install -m 644 ${WORKDIR}/mdev.conf ${D}${sysconfdir}/mdev.conf
- fi
+ if grep "CONFIG_INETD=y" ${WORKDIR}/defconfig; then
+ install -m 0755 ${WORKDIR}/inetd ${D}${sysconfdir}/init.d/inetd.${PN}
+ install -m 0644 ${WORKDIR}/inetd.conf ${D}${sysconfdir}/
+ fi
+ if grep "CONFIG_MDEV=y" ${WORKDIR}/defconfig; then
+ install -m 0755 ${WORKDIR}/mdev ${D}${sysconfdir}/init.d/mdev
+ if grep "CONFIG_FEATURE_MDEV_CONF=y" ${WORKDIR}/defconfig; then
+ install -m 644 ${WORKDIR}/mdev.conf ${D}${sysconfdir}/mdev.conf
+ fi
fi
-
install -m 0644 ${S}/busybox.links ${D}${sysconfdir}
-
- # remove the temp dir to suppress warning, we are done with it
- rm -rf ${D}/busybox
}
pkg_postinst_${PN} () {
--
1.7.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH v2] busybox: sync do_install() with oe master (mostly)
2011-05-24 13:13 [PATCH] busybox: sync do_install() with oe master (mostly) Phil Blundell
@ 2011-05-26 10:08 ` Phil Blundell
2011-05-31 13:31 ` Phil Blundell
2011-06-03 0:05 ` Saul Wold
0 siblings, 2 replies; 4+ messages in thread
From: Phil Blundell @ 2011-05-26 10:08 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
This is basically a backport of the current state of the art from the
openembedded master repo. In particular this fixes an installation
error on micro:
| + cp -dPr /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/bin /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/sbin /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/
| cp: will not create hard link `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/image/bin' to directory `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/bin'
| cp: cannot copy a directory, `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image', into itself, `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/image'
| ERROR: Function 'do_install' failed (see /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/temp/log.do_install.3808 for further information)
Signed-off-by: Phil Blundell <philb@gnu.org>
---
This version reinstates the busybox-udhcpc initscript which had gotten dropped by mistake in the last one.
meta/recipes-core/busybox/busybox.inc | 99 +++++++++++++++------------
meta/recipes-core/busybox/busybox_1.18.4.bb | 2 +-
2 files changed, 55 insertions(+), 46 deletions(-)
diff --git a/meta/recipes-core/busybox/busybox.inc b/meta/recipes-core/busybox/busybox.inc
index 341c5c4..86fbdae 100644
--- a/meta/recipes-core/busybox/busybox.inc
+++ b/meta/recipes-core/busybox/busybox.inc
@@ -46,75 +46,84 @@ do_compile() {
}
do_install () {
- unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
+ oe_runmake busybox.links
+ if [ "${prefix}" != "/usr" ]; then
+ sed "s:^/usr/:${prefix}/:" busybox.links > busybox.links.new
+ mv busybox.links.new busybox.links
+ fi
+ if [ "${base_sbindir}" != "/sbin" ]; then
+ sed "s:^/sbin/:${base_sbindir}/:" busybox.links > busybox.links.new
+ mv busybox.links.new busybox.links
+ fi
+
install -d ${D}${sysconfdir}/init.d
- oe_runmake "PREFIX=${D}" install
- cp -pPR ${S}/_install/* ${D}/
-
- # Move everything to /busybox (not supposed to end up in any package)
- install -d ${D}/busybox
- ls ${D} -R
-
- cp -dPr ${D}${base_bindir} ${D}${base_sbindir} ${D}${prefix} ${D}/busybox/
- # Move the busybox binary back to /bin
- install -d ${D}${base_bindir}
- mv ${D}/busybox${base_bindir}/busybox ${D}${base_bindir}/
- # Move back the sh symlink
- test -h ${D}/busybox${base_bindir}/sh && mv ${D}/busybox${base_bindir}/sh ${D}${base_bindir}/
-
- install -m 0755 ${WORKDIR}/syslog ${D}${sysconfdir}/init.d/syslog.${PN}
- install -m 644 ${WORKDIR}/syslog.conf ${D}${sysconfdir}/syslog.conf.${PN}
- if grep "CONFIG_CROND=y" ${WORKDIR}/defconfig; then
- # Move crond back to /usr/sbin/crond
- install -d ${D}${sbindir}
- mv ${D}/busybox${sbindir}/crond ${D}${sbindir}/
+ if ! grep -q "CONFIG_FEATURE_INDIVIDUAL=y" ${WORKDIR}/defconfig; then
+ # Install /bin/busybox, and the /bin/sh link so the postinst script
+ # can run. Let update-alternatives handle the rest.
+ install -d ${D}${base_bindir}
+ if grep -q "CONFIG_FEATURE_SUID=y" ${WORKDIR}/defconfig; then
+ install -m 4755 ${S}/busybox ${D}${base_bindir}
+ else
+ install -m 0755 ${S}/busybox ${D}${base_bindir}
+ fi
+ ln -sf busybox ${D}${base_bindir}/sh
+ else
+ install -d ${D}${base_bindir} ${D}${base_sbindir}
+ install -d ${D}${libdir} ${D}${bindir} ${D}${sbindir}
+ cat busybox.links | while read FILE; do
+ NAME=`basename "$FILE"`
+ install -m 0755 "0_lib/$NAME" "${D}$FILE.${PN}"
+ done
+ # add suid bit where needed
+ for i in `grep -E "APPLET.*_BB_SUID_((MAYBE|REQUIRE))" include/applets.h | grep -v _BB_SUID_DROP | cut -f 3 -d '(' | cut -f 1 -d ','`; do
+ find ${D} -name $i.${PN} -exec chmod a+s {} \;
+ done
+ install -m 0755 0_lib/libbusybox.so.${PV} ${D}${libdir}/libbusybox.so.${PV}
+ ln -sf sh.${PN} ${D}${base_bindir}/sh
+ ln -sf ln.${PN} ${D}${base_bindir}/ln
+ ln -sf test.${PN} ${D}${bindir}/test
+ if [ -f ${D}/linuxrc.${PN} ]; then
+ mv ${D}/linuxrc.${PN} ${D}/linuxrc
+ fi
+ fi
+
+ if grep -q "CONFIG_SYSLOGD=y" ${WORKDIR}/defconfig; then
+ install -m 0755 ${WORKDIR}/syslog ${D}${sysconfdir}/init.d/syslog.${PN}
+ install -m 644 ${WORKDIR}/syslog.conf ${D}${sysconfdir}/syslog.conf.${PN}
+ fi
+ if grep "CONFIG_CROND=y" ${WORKDIR}/defconfig; then
install -m 0755 ${WORKDIR}/busybox-cron ${D}${sysconfdir}/init.d/
fi
if grep "CONFIG_HTTPD=y" ${WORKDIR}/defconfig; then
- # Move httpd back to /usr/sbin/httpd
- install -d ${D}${sbindir}
- mv ${D}/busybox${sbindir}/httpd ${D}${sbindir}/
-
install -m 0755 ${WORKDIR}/busybox-httpd ${D}${sysconfdir}/init.d/
install -d ${D}/srv/www
fi
if grep "CONFIG_UDHCPD=y" ${WORKDIR}/defconfig; then
- # Move udhcpd back to /usr/sbin/udhcpd
- install -d ${D}${sbindir}
- mv ${D}/busybox${sbindir}/udhcpd ${D}${sbindir}/
-
install -m 0755 ${WORKDIR}/busybox-udhcpd ${D}${sysconfdir}/init.d/
fi
if grep "CONFIG_HWCLOCK=y" ${WORKDIR}/defconfig; then
- # Move hwclock back to /sbin/hwclock
- install -d ${D}${base_sbindir}
- mv ${D}/busybox${base_sbindir}/hwclock ${D}${base_sbindir}/
-
+ install -d ${D}${sysconfdir}/default
install -m 0755 ${WORKDIR}/hwclock.sh ${D}${sysconfdir}/init.d/
fi
if grep "CONFIG_UDHCPC=y" ${WORKDIR}/defconfig; then
- # Move dhcpc back to /usr/sbin/udhcpc
- install -d ${D}${base_sbindir}
- mv ${D}/busybox${base_sbindir}/udhcpc ${D}${base_sbindir}/
-
install -d ${D}${sysconfdir}/udhcpc.d
install -d ${D}${datadir}/udhcpc
- install -m 0755 ${S}/examples/udhcp/simple.script ${D}${sysconfdir}/udhcpc.d/50default
+ install -m 0755 ${WORKDIR}/simple.script ${D}${sysconfdir}/udhcpc.d/50default
install -m 0755 ${WORKDIR}/default.script ${D}${datadir}/udhcpc/default.script
install -m 0755 ${WORKDIR}/busybox-udhcpc ${D}${sysconfdir}/init.d/
fi
- if grep "CONFIG_MDEV=y" ${WORKDIR}/defconfig; then
- install -m 0755 ${WORKDIR}/mdev ${D}${sysconfdir}/init.d/mdev
- if grep "CONFIG_FEATURE_MDEV_CONF=y" ${WORKDIR}/defconfig; then
- install -m 644 ${WORKDIR}/mdev.conf ${D}${sysconfdir}/mdev.conf
- fi
+ if grep "CONFIG_INETD=y" ${WORKDIR}/defconfig; then
+ install -m 0755 ${WORKDIR}/inetd ${D}${sysconfdir}/init.d/inetd.${PN}
+ install -m 0644 ${WORKDIR}/inetd.conf ${D}${sysconfdir}/
+ fi
+ if grep "CONFIG_MDEV=y" ${WORKDIR}/defconfig; then
+ install -m 0755 ${WORKDIR}/mdev ${D}${sysconfdir}/init.d/mdev
+ if grep "CONFIG_FEATURE_MDEV_CONF=y" ${WORKDIR}/defconfig; then
+ install -m 644 ${WORKDIR}/mdev.conf ${D}${sysconfdir}/mdev.conf
+ fi
fi
-
install -m 0644 ${S}/busybox.links ${D}${sysconfdir}
-
- # remove the temp dir to suppress warning, we are done with it
- rm -rf ${D}/busybox
}
pkg_postinst_${PN} () {
diff --git a/meta/recipes-core/busybox/busybox_1.18.4.bb b/meta/recipes-core/busybox/busybox_1.18.4.bb
index cf37650..a5080d5 100644
--- a/meta/recipes-core/busybox/busybox_1.18.4.bb
+++ b/meta/recipes-core/busybox/busybox_1.18.4.bb
@@ -1,5 +1,5 @@
require busybox.inc
-PR = "r1"
+PR = "r2"
SRC_URI = "http://www.busybox.net/downloads/busybox-${PV}.tar.bz2;name=tarball \
file://udhcpscript.patch \
--
1.7.1
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH v2] busybox: sync do_install() with oe master (mostly)
2011-05-26 10:08 ` [PATCH v2] " Phil Blundell
@ 2011-05-31 13:31 ` Phil Blundell
2011-06-03 0:05 ` Saul Wold
1 sibling, 0 replies; 4+ messages in thread
From: Phil Blundell @ 2011-05-31 13:31 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
Ping?
p.
On Thu, 2011-05-26 at 11:08 +0100, Phil Blundell wrote:
> This is basically a backport of the current state of the art from the
> openembedded master repo. In particular this fixes an installation
> error on micro:
>
> | + cp -dPr /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/bin /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/sbin /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/
> | cp: will not create hard link `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/image/bin' to directory `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/bin'
> | cp: cannot copy a directory, `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image', into itself, `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/image'
> | ERROR: Function 'do_install' failed (see /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/temp/log.do_install.3808 for further information)
>
> Signed-off-by: Phil Blundell <philb@gnu.org>
> ---
>
> This version reinstates the busybox-udhcpc initscript which had gotten dropped by mistake in the last one.
>
> meta/recipes-core/busybox/busybox.inc | 99 +++++++++++++++------------
> meta/recipes-core/busybox/busybox_1.18.4.bb | 2 +-
> 2 files changed, 55 insertions(+), 46 deletions(-)
>
> diff --git a/meta/recipes-core/busybox/busybox.inc b/meta/recipes-core/busybox/busybox.inc
> index 341c5c4..86fbdae 100644
> --- a/meta/recipes-core/busybox/busybox.inc
> +++ b/meta/recipes-core/busybox/busybox.inc
> @@ -46,75 +46,84 @@ do_compile() {
> }
>
> do_install () {
> - unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
> + oe_runmake busybox.links
> + if [ "${prefix}" != "/usr" ]; then
> + sed "s:^/usr/:${prefix}/:" busybox.links > busybox.links.new
> + mv busybox.links.new busybox.links
> + fi
> + if [ "${base_sbindir}" != "/sbin" ]; then
> + sed "s:^/sbin/:${base_sbindir}/:" busybox.links > busybox.links.new
> + mv busybox.links.new busybox.links
> + fi
> +
> install -d ${D}${sysconfdir}/init.d
> - oe_runmake "PREFIX=${D}" install
> - cp -pPR ${S}/_install/* ${D}/
> -
> - # Move everything to /busybox (not supposed to end up in any package)
> - install -d ${D}/busybox
> - ls ${D} -R
> -
> - cp -dPr ${D}${base_bindir} ${D}${base_sbindir} ${D}${prefix} ${D}/busybox/
> - # Move the busybox binary back to /bin
> - install -d ${D}${base_bindir}
> - mv ${D}/busybox${base_bindir}/busybox ${D}${base_bindir}/
> - # Move back the sh symlink
> - test -h ${D}/busybox${base_bindir}/sh && mv ${D}/busybox${base_bindir}/sh ${D}${base_bindir}/
> -
> - install -m 0755 ${WORKDIR}/syslog ${D}${sysconfdir}/init.d/syslog.${PN}
> - install -m 644 ${WORKDIR}/syslog.conf ${D}${sysconfdir}/syslog.conf.${PN}
> - if grep "CONFIG_CROND=y" ${WORKDIR}/defconfig; then
> - # Move crond back to /usr/sbin/crond
> - install -d ${D}${sbindir}
> - mv ${D}/busybox${sbindir}/crond ${D}${sbindir}/
>
> + if ! grep -q "CONFIG_FEATURE_INDIVIDUAL=y" ${WORKDIR}/defconfig; then
> + # Install /bin/busybox, and the /bin/sh link so the postinst script
> + # can run. Let update-alternatives handle the rest.
> + install -d ${D}${base_bindir}
> + if grep -q "CONFIG_FEATURE_SUID=y" ${WORKDIR}/defconfig; then
> + install -m 4755 ${S}/busybox ${D}${base_bindir}
> + else
> + install -m 0755 ${S}/busybox ${D}${base_bindir}
> + fi
> + ln -sf busybox ${D}${base_bindir}/sh
> + else
> + install -d ${D}${base_bindir} ${D}${base_sbindir}
> + install -d ${D}${libdir} ${D}${bindir} ${D}${sbindir}
> + cat busybox.links | while read FILE; do
> + NAME=`basename "$FILE"`
> + install -m 0755 "0_lib/$NAME" "${D}$FILE.${PN}"
> + done
> + # add suid bit where needed
> + for i in `grep -E "APPLET.*_BB_SUID_((MAYBE|REQUIRE))" include/applets.h | grep -v _BB_SUID_DROP | cut -f 3 -d '(' | cut -f 1 -d ','`; do
> + find ${D} -name $i.${PN} -exec chmod a+s {} \;
> + done
> + install -m 0755 0_lib/libbusybox.so.${PV} ${D}${libdir}/libbusybox.so.${PV}
> + ln -sf sh.${PN} ${D}${base_bindir}/sh
> + ln -sf ln.${PN} ${D}${base_bindir}/ln
> + ln -sf test.${PN} ${D}${bindir}/test
> + if [ -f ${D}/linuxrc.${PN} ]; then
> + mv ${D}/linuxrc.${PN} ${D}/linuxrc
> + fi
> + fi
> +
> + if grep -q "CONFIG_SYSLOGD=y" ${WORKDIR}/defconfig; then
> + install -m 0755 ${WORKDIR}/syslog ${D}${sysconfdir}/init.d/syslog.${PN}
> + install -m 644 ${WORKDIR}/syslog.conf ${D}${sysconfdir}/syslog.conf.${PN}
> + fi
> + if grep "CONFIG_CROND=y" ${WORKDIR}/defconfig; then
> install -m 0755 ${WORKDIR}/busybox-cron ${D}${sysconfdir}/init.d/
> fi
> if grep "CONFIG_HTTPD=y" ${WORKDIR}/defconfig; then
> - # Move httpd back to /usr/sbin/httpd
> - install -d ${D}${sbindir}
> - mv ${D}/busybox${sbindir}/httpd ${D}${sbindir}/
> -
> install -m 0755 ${WORKDIR}/busybox-httpd ${D}${sysconfdir}/init.d/
> install -d ${D}/srv/www
> fi
> if grep "CONFIG_UDHCPD=y" ${WORKDIR}/defconfig; then
> - # Move udhcpd back to /usr/sbin/udhcpd
> - install -d ${D}${sbindir}
> - mv ${D}/busybox${sbindir}/udhcpd ${D}${sbindir}/
> -
> install -m 0755 ${WORKDIR}/busybox-udhcpd ${D}${sysconfdir}/init.d/
> fi
> if grep "CONFIG_HWCLOCK=y" ${WORKDIR}/defconfig; then
> - # Move hwclock back to /sbin/hwclock
> - install -d ${D}${base_sbindir}
> - mv ${D}/busybox${base_sbindir}/hwclock ${D}${base_sbindir}/
> -
> + install -d ${D}${sysconfdir}/default
> install -m 0755 ${WORKDIR}/hwclock.sh ${D}${sysconfdir}/init.d/
> fi
> if grep "CONFIG_UDHCPC=y" ${WORKDIR}/defconfig; then
> - # Move dhcpc back to /usr/sbin/udhcpc
> - install -d ${D}${base_sbindir}
> - mv ${D}/busybox${base_sbindir}/udhcpc ${D}${base_sbindir}/
> -
> install -d ${D}${sysconfdir}/udhcpc.d
> install -d ${D}${datadir}/udhcpc
> - install -m 0755 ${S}/examples/udhcp/simple.script ${D}${sysconfdir}/udhcpc.d/50default
> + install -m 0755 ${WORKDIR}/simple.script ${D}${sysconfdir}/udhcpc.d/50default
> install -m 0755 ${WORKDIR}/default.script ${D}${datadir}/udhcpc/default.script
> install -m 0755 ${WORKDIR}/busybox-udhcpc ${D}${sysconfdir}/init.d/
> fi
> - if grep "CONFIG_MDEV=y" ${WORKDIR}/defconfig; then
> - install -m 0755 ${WORKDIR}/mdev ${D}${sysconfdir}/init.d/mdev
> - if grep "CONFIG_FEATURE_MDEV_CONF=y" ${WORKDIR}/defconfig; then
> - install -m 644 ${WORKDIR}/mdev.conf ${D}${sysconfdir}/mdev.conf
> - fi
> + if grep "CONFIG_INETD=y" ${WORKDIR}/defconfig; then
> + install -m 0755 ${WORKDIR}/inetd ${D}${sysconfdir}/init.d/inetd.${PN}
> + install -m 0644 ${WORKDIR}/inetd.conf ${D}${sysconfdir}/
> + fi
> + if grep "CONFIG_MDEV=y" ${WORKDIR}/defconfig; then
> + install -m 0755 ${WORKDIR}/mdev ${D}${sysconfdir}/init.d/mdev
> + if grep "CONFIG_FEATURE_MDEV_CONF=y" ${WORKDIR}/defconfig; then
> + install -m 644 ${WORKDIR}/mdev.conf ${D}${sysconfdir}/mdev.conf
> + fi
> fi
> -
> install -m 0644 ${S}/busybox.links ${D}${sysconfdir}
> -
> - # remove the temp dir to suppress warning, we are done with it
> - rm -rf ${D}/busybox
> }
>
> pkg_postinst_${PN} () {
> diff --git a/meta/recipes-core/busybox/busybox_1.18.4.bb b/meta/recipes-core/busybox/busybox_1.18.4.bb
> index cf37650..a5080d5 100644
> --- a/meta/recipes-core/busybox/busybox_1.18.4.bb
> +++ b/meta/recipes-core/busybox/busybox_1.18.4.bb
> @@ -1,5 +1,5 @@
> require busybox.inc
> -PR = "r1"
> +PR = "r2"
>
> SRC_URI = "http://www.busybox.net/downloads/busybox-${PV}.tar.bz2;name=tarball \
> file://udhcpscript.patch \
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: [PATCH v2] busybox: sync do_install() with oe master (mostly)
2011-05-26 10:08 ` [PATCH v2] " Phil Blundell
2011-05-31 13:31 ` Phil Blundell
@ 2011-06-03 0:05 ` Saul Wold
1 sibling, 0 replies; 4+ messages in thread
From: Saul Wold @ 2011-06-03 0:05 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
On 05/26/2011 03:08 AM, Phil Blundell wrote:
> This is basically a backport of the current state of the art from the
> openembedded master repo. In particular this fixes an installation
> error on micro:
>
> | + cp -dPr /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/bin /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/sbin /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/
> | cp: will not create hard link `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/image/bin' to directory `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/bin'
> | cp: cannot copy a directory, `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image', into itself, `/home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/image/busybox/image'
> | ERROR: Function 'do_install' failed (see /home/pb/oe/build-meta/tmp-eglibc/work/i586-oe-linux/busybox-1.18.4-r1.2/temp/log.do_install.3808 for further information)
>
> Signed-off-by: Phil Blundell<philb@gnu.org>
> ---
>
> This version reinstates the busybox-udhcpc initscript which had gotten dropped by mistake in the last one.
>
> meta/recipes-core/busybox/busybox.inc | 99 +++++++++++++++------------
> meta/recipes-core/busybox/busybox_1.18.4.bb | 2 +-
> 2 files changed, 55 insertions(+), 46 deletions(-)
>
> diff --git a/meta/recipes-core/busybox/busybox.inc b/meta/recipes-core/busybox/busybox.inc
> index 341c5c4..86fbdae 100644
> --- a/meta/recipes-core/busybox/busybox.inc
> +++ b/meta/recipes-core/busybox/busybox.inc
> @@ -46,75 +46,84 @@ do_compile() {
> }
>
> do_install () {
> - unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS
> + oe_runmake busybox.links
> + if [ "${prefix}" != "/usr" ]; then
> + sed "s:^/usr/:${prefix}/:" busybox.links> busybox.links.new
> + mv busybox.links.new busybox.links
> + fi
> + if [ "${base_sbindir}" != "/sbin" ]; then
> + sed "s:^/sbin/:${base_sbindir}/:" busybox.links> busybox.links.new
> + mv busybox.links.new busybox.links
> + fi
> +
> install -d ${D}${sysconfdir}/init.d
> - oe_runmake "PREFIX=${D}" install
> - cp -pPR ${S}/_install/* ${D}/
> -
> - # Move everything to /busybox (not supposed to end up in any package)
> - install -d ${D}/busybox
> - ls ${D} -R
> -
> - cp -dPr ${D}${base_bindir} ${D}${base_sbindir} ${D}${prefix} ${D}/busybox/
> - # Move the busybox binary back to /bin
> - install -d ${D}${base_bindir}
> - mv ${D}/busybox${base_bindir}/busybox ${D}${base_bindir}/
> - # Move back the sh symlink
> - test -h ${D}/busybox${base_bindir}/sh&& mv ${D}/busybox${base_bindir}/sh ${D}${base_bindir}/
> -
> - install -m 0755 ${WORKDIR}/syslog ${D}${sysconfdir}/init.d/syslog.${PN}
> - install -m 644 ${WORKDIR}/syslog.conf ${D}${sysconfdir}/syslog.conf.${PN}
> - if grep "CONFIG_CROND=y" ${WORKDIR}/defconfig; then
> - # Move crond back to /usr/sbin/crond
> - install -d ${D}${sbindir}
> - mv ${D}/busybox${sbindir}/crond ${D}${sbindir}/
>
> + if ! grep -q "CONFIG_FEATURE_INDIVIDUAL=y" ${WORKDIR}/defconfig; then
> + # Install /bin/busybox, and the /bin/sh link so the postinst script
> + # can run. Let update-alternatives handle the rest.
> + install -d ${D}${base_bindir}
> + if grep -q "CONFIG_FEATURE_SUID=y" ${WORKDIR}/defconfig; then
> + install -m 4755 ${S}/busybox ${D}${base_bindir}
> + else
> + install -m 0755 ${S}/busybox ${D}${base_bindir}
> + fi
> + ln -sf busybox ${D}${base_bindir}/sh
> + else
> + install -d ${D}${base_bindir} ${D}${base_sbindir}
> + install -d ${D}${libdir} ${D}${bindir} ${D}${sbindir}
> + cat busybox.links | while read FILE; do
> + NAME=`basename "$FILE"`
> + install -m 0755 "0_lib/$NAME" "${D}$FILE.${PN}"
> + done
> + # add suid bit where needed
> + for i in `grep -E "APPLET.*_BB_SUID_((MAYBE|REQUIRE))" include/applets.h | grep -v _BB_SUID_DROP | cut -f 3 -d '(' | cut -f 1 -d ','`; do
> + find ${D} -name $i.${PN} -exec chmod a+s {} \;
> + done
> + install -m 0755 0_lib/libbusybox.so.${PV} ${D}${libdir}/libbusybox.so.${PV}
> + ln -sf sh.${PN} ${D}${base_bindir}/sh
> + ln -sf ln.${PN} ${D}${base_bindir}/ln
> + ln -sf test.${PN} ${D}${bindir}/test
> + if [ -f ${D}/linuxrc.${PN} ]; then
> + mv ${D}/linuxrc.${PN} ${D}/linuxrc
> + fi
> + fi
> +
> + if grep -q "CONFIG_SYSLOGD=y" ${WORKDIR}/defconfig; then
> + install -m 0755 ${WORKDIR}/syslog ${D}${sysconfdir}/init.d/syslog.${PN}
> + install -m 644 ${WORKDIR}/syslog.conf ${D}${sysconfdir}/syslog.conf.${PN}
> + fi
> + if grep "CONFIG_CROND=y" ${WORKDIR}/defconfig; then
> install -m 0755 ${WORKDIR}/busybox-cron ${D}${sysconfdir}/init.d/
> fi
> if grep "CONFIG_HTTPD=y" ${WORKDIR}/defconfig; then
> - # Move httpd back to /usr/sbin/httpd
> - install -d ${D}${sbindir}
> - mv ${D}/busybox${sbindir}/httpd ${D}${sbindir}/
> -
> install -m 0755 ${WORKDIR}/busybox-httpd ${D}${sysconfdir}/init.d/
> install -d ${D}/srv/www
> fi
> if grep "CONFIG_UDHCPD=y" ${WORKDIR}/defconfig; then
> - # Move udhcpd back to /usr/sbin/udhcpd
> - install -d ${D}${sbindir}
> - mv ${D}/busybox${sbindir}/udhcpd ${D}${sbindir}/
> -
> install -m 0755 ${WORKDIR}/busybox-udhcpd ${D}${sysconfdir}/init.d/
> fi
> if grep "CONFIG_HWCLOCK=y" ${WORKDIR}/defconfig; then
> - # Move hwclock back to /sbin/hwclock
> - install -d ${D}${base_sbindir}
> - mv ${D}/busybox${base_sbindir}/hwclock ${D}${base_sbindir}/
> -
> + install -d ${D}${sysconfdir}/default
> install -m 0755 ${WORKDIR}/hwclock.sh ${D}${sysconfdir}/init.d/
> fi
> if grep "CONFIG_UDHCPC=y" ${WORKDIR}/defconfig; then
> - # Move dhcpc back to /usr/sbin/udhcpc
> - install -d ${D}${base_sbindir}
> - mv ${D}/busybox${base_sbindir}/udhcpc ${D}${base_sbindir}/
> -
> install -d ${D}${sysconfdir}/udhcpc.d
> install -d ${D}${datadir}/udhcpc
> - install -m 0755 ${S}/examples/udhcp/simple.script ${D}${sysconfdir}/udhcpc.d/50default
> + install -m 0755 ${WORKDIR}/simple.script ${D}${sysconfdir}/udhcpc.d/50default
> install -m 0755 ${WORKDIR}/default.script ${D}${datadir}/udhcpc/default.script
> install -m 0755 ${WORKDIR}/busybox-udhcpc ${D}${sysconfdir}/init.d/
> fi
> - if grep "CONFIG_MDEV=y" ${WORKDIR}/defconfig; then
> - install -m 0755 ${WORKDIR}/mdev ${D}${sysconfdir}/init.d/mdev
> - if grep "CONFIG_FEATURE_MDEV_CONF=y" ${WORKDIR}/defconfig; then
> - install -m 644 ${WORKDIR}/mdev.conf ${D}${sysconfdir}/mdev.conf
> - fi
> + if grep "CONFIG_INETD=y" ${WORKDIR}/defconfig; then
> + install -m 0755 ${WORKDIR}/inetd ${D}${sysconfdir}/init.d/inetd.${PN}
> + install -m 0644 ${WORKDIR}/inetd.conf ${D}${sysconfdir}/
> + fi
> + if grep "CONFIG_MDEV=y" ${WORKDIR}/defconfig; then
> + install -m 0755 ${WORKDIR}/mdev ${D}${sysconfdir}/init.d/mdev
> + if grep "CONFIG_FEATURE_MDEV_CONF=y" ${WORKDIR}/defconfig; then
> + install -m 644 ${WORKDIR}/mdev.conf ${D}${sysconfdir}/mdev.conf
> + fi
> fi
> -
> install -m 0644 ${S}/busybox.links ${D}${sysconfdir}
> -
> - # remove the temp dir to suppress warning, we are done with it
> - rm -rf ${D}/busybox
> }
>
> pkg_postinst_${PN} () {
> diff --git a/meta/recipes-core/busybox/busybox_1.18.4.bb b/meta/recipes-core/busybox/busybox_1.18.4.bb
> index cf37650..a5080d5 100644
> --- a/meta/recipes-core/busybox/busybox_1.18.4.bb
> +++ b/meta/recipes-core/busybox/busybox_1.18.4.bb
> @@ -1,5 +1,5 @@
> require busybox.inc
> -PR = "r1"
> +PR = "r2"
>
> SRC_URI = "http://www.busybox.net/downloads/busybox-${PV}.tar.bz2;name=tarball \
> file://udhcpscript.patch \
Merged into oe-core
Thanks
Sau!
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-06-03 0:08 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-05-24 13:13 [PATCH] busybox: sync do_install() with oe master (mostly) Phil Blundell
2011-05-26 10:08 ` [PATCH v2] " Phil Blundell
2011-05-31 13:31 ` Phil Blundell
2011-06-03 0:05 ` Saul Wold
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox