Building behind a firewall/proxy

Building behind a firewall/proxy

[Joshua Lock]

All,

For the Yocto 1.1 release we want to ease the pain of getting set up to
build behind a firewall.

I have a series of patches under development to run a one hit sanity
test which tries to verify the user can fetch and in the case of failure
point the user to a wiki page where we'd document common causes of fetch
failures.

We're also going to look at the site.conf file, which can be used to
specify proxy settings and other site specific settings such MIRRORS,
and ensure that it can easily be edited to help people get set up.

It'd be great if people who operate behind a proxy/firewall can help us
document the steps they had to take to work around this.

Further if you have other ideas as to how we can help make this process
less painful please let us know.

Regards,
Joshua
-- 
Joshua Lock
        Yocto Project "Johannes factotum"
        Intel Open Source Technology Centre

Re: Building behind a firewall/proxy

[Koen Kooi]

Op 28 jun 2011, om 22:14 heeft Joshua Lock het volgende geschreven:

> All,
> 
> For the Yocto 1.1 release we want to ease the pain of getting set up to
> build behind a firewall.
> 
> I have a series of patches under development to run a one hit sanity
> test which tries to verify the user can fetch and in the case of failure
> point the user to a wiki page where we'd document common causes of fetch
> failures.
> 
> We're also going to look at the site.conf file, which can be used to
> specify proxy settings and other site specific settings such MIRRORS,
> and ensure that it can easily be edited to help people get set up.
> 
> It'd be great if people who operate behind a proxy/firewall can help us
> document the steps they had to take to work around this.
> 
> Further if you have other ideas as to how we can help make this process
> less painful please let us know.

This is what I'm using inside TI: http://git.angstrom-distribution.org/cgi-bin/cgit.cgi/setup-scripts/tree/oebb.sh?h=oe-core

It grew organically, so grepping for 'proxy' is your best bet :)

regards,

Koen

Re: Building behind a firewall/proxy

[Joshua Lock]

On Tue, 2011-06-28 at 22:20 +0200, Koen Kooi wrote:
> Op 28 jun 2011, om 22:14 heeft Joshua Lock het volgende geschreven:
> 
> > All,
> > 
> > For the Yocto 1.1 release we want to ease the pain of getting set up to
> > build behind a firewall.
> > 
> > I have a series of patches under development to run a one hit sanity
> > test which tries to verify the user can fetch and in the case of failure
> > point the user to a wiki page where we'd document common causes of fetch
> > failures.
> > 
> > We're also going to look at the site.conf file, which can be used to
> > specify proxy settings and other site specific settings such MIRRORS,
> > and ensure that it can easily be edited to help people get set up.
> > 
> > It'd be great if people who operate behind a proxy/firewall can help us
> > document the steps they had to take to work around this.
> > 
> > Further if you have other ideas as to how we can help make this process
> > less painful please let us know.
> 
> This is what I'm using inside TI: http://git.angstrom-distribution.org/cgi-bin/cgit.cgi/setup-scripts/tree/oebb.sh?h=oe-core
> 
> It grew organically, so grepping for 'proxy' is your best bet :)

Thanks Koen, a useful reference.

Joshua
-- 
Joshua Lock
        Yocto Project "Johannes factotum"
        Intel Open Source Technology Centre

Re: Building behind a firewall/proxy

[Tom Rini]

On 06/28/2011 01:14 PM, Joshua Lock wrote:
> All,
> 
> For the Yocto 1.1 release we want to ease the pain of getting set up to
> build behind a firewall.
> 
> I have a series of patches under development to run a one hit sanity
> test which tries to verify the user can fetch and in the case of failure
> point the user to a wiki page where we'd document common causes of fetch
> failures.
> 
> We're also going to look at the site.conf file, which can be used to
> specify proxy settings and other site specific settings such MIRRORS,
> and ensure that it can easily be edited to help people get set up.
> 
> It'd be great if people who operate behind a proxy/firewall can help us
> document the steps they had to take to work around this.
> 
> Further if you have other ideas as to how we can help make this process
> less painful please let us know.

Is SOCKS5_PASSWD SOCKS5_USER in the default BB_ENV_EXTRAWHITE list atm?
 If not, it needs to be.

-- 
Tom Rini
Mentor Graphics Corporation

Re: Building behind a firewall/proxy

[Joshua Lock]

On Tue, 2011-06-28 at 14:46 -0700, Tom Rini wrote:
> On 06/28/2011 01:14 PM, Joshua Lock wrote:
> > All,
> > 
> > For the Yocto 1.1 release we want to ease the pain of getting set up to
> > build behind a firewall.
> > 
> > I have a series of patches under development to run a one hit sanity
> > test which tries to verify the user can fetch and in the case of failure
> > point the user to a wiki page where we'd document common causes of fetch
> > failures.
> > 
> > We're also going to look at the site.conf file, which can be used to
> > specify proxy settings and other site specific settings such MIRRORS,
> > and ensure that it can easily be edited to help people get set up.
> > 
> > It'd be great if people who operate behind a proxy/firewall can help us
> > document the steps they had to take to work around this.
> > 
> > Further if you have other ideas as to how we can help make this process
> > less painful please let us know.
> 
> Is SOCKS5_PASSWD SOCKS5_USER in the default BB_ENV_EXTRAWHITE list atm?
>  If not, it needs to be.
> 

Noted, thanks Tom.

Joshua
-- 
Joshua Lock
        Yocto Project "Johannes factotum"
        Intel Open Source Technology Centre