Openembedded Core Discussions
 help / color / mirror / Atom feed
* Sanity check failed after glibc deletion (was: Re: [PATCH] glibc: deleted)
@ 2011-07-28  7:30 Samuel Stirtzel
  2011-07-28 10:07 ` Phil Blundell
  0 siblings, 1 reply; 3+ messages in thread
From: Samuel Stirtzel @ 2011-07-28  7:30 UTC (permalink / raw)
  To: Patches and discussions about the oe-core layer

My current configuration was set up with the help of the Angstrom
instructions [1], and I applied patches via the "oebb.sh update"
command.
Running Bitbake would show the following sanity error on any image / machine:

samuel@S-Linux:/var/oe-core/setup-scripts$ bitbake console-image
ERROR:  Poky's config sanity checker detected a potential misconfiguration.
    Either fix the cause of this error or at your own risk disable the
checker (see sanity.conf).
    Following is the list of potential problems / advisories:

    You have a 32-bit libc, but no 32-bit headers.  You must install
the 32-bit libc headers.

ERROR: Execution of event handler 'check_sanity_eventhandler' failed


For me it looks like an error with my configuration, but on the other
side, before the update building images with bitbake worked.
Well I don't know exactly if this is caused by the glibc deletion, but
IMHO it seems very likely.
Anyone else faced the same problem?

Help would be very appreciated.

Regards
--Samuel

[1] http://git.angstrom-distribution.org/cgi-bin/cgit.cgi/meta-angstrom/tree/README



^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2011-07-28 11:29 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-07-28  7:30 Sanity check failed after glibc deletion (was: Re: [PATCH] glibc: deleted) Samuel Stirtzel
2011-07-28 10:07 ` Phil Blundell
2011-07-28 11:25   ` Samuel Stirtzel

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox