* missing mesa-dri dependency?
@ 2011-10-13 8:24 Koen Kooi
2011-10-15 12:52 ` Andreas Müller
0 siblings, 1 reply; 5+ messages in thread
From: Koen Kooi @ 2011-10-13 8:24 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
Hi,
I remember fixing this in meta-oe, but now exactly how. IIRC both mesa-xlib and mesa-dri needed to get built.
configure: error: Package requirements (glproto >= 1.4.14 dri >= 7.8.0) were not met:
|
| No package 'dri' found
|
| Consider adjusting the PKG_CONFIG_PATH environment variable if you
| installed software in a non-standard prefix.
|
| Alternatively, you may set the environment variables DRI_CFLAGS
| and DRI_LIBS to avoid the need to call pkg-config.
| See the pkg-config man page for more details.
| + bbfatal 'oe_runconf failed'
| + echo 'ERROR: oe_runconf failed'
| ERROR: oe_runconf failed
| + exit 1
| ERROR: Function 'do_configure' failed (see /OE/tentacle/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/xserver-xorg-1_1.11.1-r0/temp/log.do_configure.3602 for further information)
NOTE: package xserver-xorg-1_1.11.1-r0: task do_configure: Failed
ERROR: Task 1842 (/OE/tentacle/sources/openembedded-core/meta/recipes-graphics/xorg-xserver/xserver-xorg_1.11.1.bb, do_configure) failed with exit code '1'
regards,
Koen
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: missing mesa-dri dependency?
2011-10-13 8:24 missing mesa-dri dependency? Koen Kooi
@ 2011-10-15 12:52 ` Andreas Müller
2011-10-15 13:00 ` Martin Jansa
2011-10-17 12:37 ` Richard Purdie
0 siblings, 2 replies; 5+ messages in thread
From: Andreas Müller @ 2011-10-15 12:52 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
On Thursday, October 13, 2011 10:24:19 AM Koen Kooi wrote:
> Hi,
>
> I remember fixing this in meta-oe, but now exactly how. IIRC both mesa-xlib and mesa-dri needed to get built.
>
> configure: error: Package requirements (glproto >= 1.4.14 dri >= 7.8.0) were not met:
> |
> | No package 'dri' found
> |
> | Consider adjusting the PKG_CONFIG_PATH environment variable if you
> | installed software in a non-standard prefix.
> |
> | Alternatively, you may set the environment variables DRI_CFLAGS
> | and DRI_LIBS to avoid the need to call pkg-config.
> | See the pkg-config man page for more details.
> | + bbfatal 'oe_runconf failed'
> | + echo 'ERROR: oe_runconf failed'
> | ERROR: oe_runconf failed
> | + exit 1
> | ERROR: Function 'do_configure' failed (see /OE/tentacle/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/xserver-xorg-1_1.11.1-r0/temp/log.do_configure.3602 for further information)
> NOTE: package xserver-xorg-1_1.11.1-r0: task do_configure: Failed
> ERROR: Task 1842 (/OE/tentacle/sources/openembedded-core/meta/recipes-graphics/xorg-xserver/xserver-xorg_1.11.1.bb, do_configure) failed with exit code '1'
>
> regards,
>
> Koen
ping - or how do you workaround this for machines not supporting mesa-dri?
Andreas
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: missing mesa-dri dependency?
2011-10-15 12:52 ` Andreas Müller
@ 2011-10-15 13:00 ` Martin Jansa
2011-10-15 14:02 ` Koen Kooi
2011-10-17 12:37 ` Richard Purdie
1 sibling, 1 reply; 5+ messages in thread
From: Martin Jansa @ 2011-10-15 13:00 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
[-- Attachment #1: Type: text/plain, Size: 1746 bytes --]
On Sat, Oct 15, 2011 at 02:52:31PM +0200, Andreas Müller wrote:
> On Thursday, October 13, 2011 10:24:19 AM Koen Kooi wrote:
> > Hi,
> >
> > I remember fixing this in meta-oe, but now exactly how. IIRC both mesa-xlib and mesa-dri needed to get built.
> >
> > configure: error: Package requirements (glproto >= 1.4.14 dri >= 7.8.0) were not met:
> > |
> > | No package 'dri' found
> > |
> > | Consider adjusting the PKG_CONFIG_PATH environment variable if you
> > | installed software in a non-standard prefix.
> > |
> > | Alternatively, you may set the environment variables DRI_CFLAGS
> > | and DRI_LIBS to avoid the need to call pkg-config.
> > | See the pkg-config man page for more details.
> > | + bbfatal 'oe_runconf failed'
> > | + echo 'ERROR: oe_runconf failed'
> > | ERROR: oe_runconf failed
> > | + exit 1
> > | ERROR: Function 'do_configure' failed (see /OE/tentacle/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/xserver-xorg-1_1.11.1-r0/temp/log.do_configure.3602 for further information)
> > NOTE: package xserver-xorg-1_1.11.1-r0: task do_configure: Failed
> > ERROR: Task 1842 (/OE/tentacle/sources/openembedded-core/meta/recipes-graphics/xorg-xserver/xserver-xorg_1.11.1.bb, do_configure) failed with exit code '1'
> >
> > regards,
> >
> > Koen
> ping - or how do you workaround this for machines not supporting mesa-dri?
use mesa-dri (with swrast) or mesa-xlib with xserver-xorg-lite
>
> Andreas
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
--
Martin 'JaMa' Jansa jabber: Martin.Jansa@gmail.com
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 205 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: missing mesa-dri dependency?
2011-10-15 13:00 ` Martin Jansa
@ 2011-10-15 14:02 ` Koen Kooi
0 siblings, 0 replies; 5+ messages in thread
From: Koen Kooi @ 2011-10-15 14:02 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
Cc: Patches and discussions about the oe-core layer
Op 15 okt. 2011 om 15:00 heeft Martin Jansa <martin.jansa@gmail.com> het volgende geschreven:
> On Sat, Oct 15, 2011 at 02:52:31PM +0200, Andreas Müller wrote:
>> On Thursday, October 13, 2011 10:24:19 AM Koen Kooi wrote:
>>> Hi,
>>>
>>> I remember fixing this in meta-oe, but now exactly how. IIRC both mesa-xlib and mesa-dri needed to get built.
>>>
>>> configure: error: Package requirements (glproto >= 1.4.14 dri >= 7.8.0) were not met:
>>> |
>>> | No package 'dri' found
>>> |
>>> | Consider adjusting the PKG_CONFIG_PATH environment variable if you
>>> | installed software in a non-standard prefix.
>>> |
>>> | Alternatively, you may set the environment variables DRI_CFLAGS
>>> | and DRI_LIBS to avoid the need to call pkg-config.
>>> | See the pkg-config man page for more details.
>>> | + bbfatal 'oe_runconf failed'
>>> | + echo 'ERROR: oe_runconf failed'
>>> | ERROR: oe_runconf failed
>>> | + exit 1
>>> | ERROR: Function 'do_configure' failed (see /OE/tentacle/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/xserver-xorg-1_1.11.1-r0/temp/log.do_configure.3602 for further information)
>>> NOTE: package xserver-xorg-1_1.11.1-r0: task do_configure: Failed
>>> ERROR: Task 1842 (/OE/tentacle/sources/openembedded-core/meta/recipes-graphics/xorg-xserver/xserver-xorg_1.11.1.bb, do_configure) failed with exit code '1'
>>>
>>> regards,
>>>
>>> Koen
>> ping - or how do you workaround this for machines not supporting mesa-dri?
>
> use mesa-dri (with swrast) or mesa-xlib with xserver-xorg-lite
Switching to the -lite would troublesome from an upgrade path of view. As for TI chips I need to figure out how to enable using our new powervr dri module in this new setup.
regards,
koen
>>
>> Andreas
>>
>> _______________________________________________
>> Openembedded-core mailing list
>> Openembedded-core@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
>
> --
> Martin 'JaMa' Jansa jabber: Martin.Jansa@gmail.com
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: missing mesa-dri dependency?
2011-10-15 12:52 ` Andreas Müller
2011-10-15 13:00 ` Martin Jansa
@ 2011-10-17 12:37 ` Richard Purdie
1 sibling, 0 replies; 5+ messages in thread
From: Richard Purdie @ 2011-10-17 12:37 UTC (permalink / raw)
To: Patches and discussions about the oe-core layer
On Sat, 2011-10-15 at 14:52 +0200, Andreas Müller wrote:
> On Thursday, October 13, 2011 10:24:19 AM Koen Kooi wrote:
> > Hi,
> >
> > I remember fixing this in meta-oe, but now exactly how. IIRC both mesa-xlib and mesa-dri needed to get built.
> >
> > configure: error: Package requirements (glproto >= 1.4.14 dri >= 7.8.0) were not met:
> > |
> > | No package 'dri' found
> > |
> > | Consider adjusting the PKG_CONFIG_PATH environment variable if you
> > | installed software in a non-standard prefix.
> > |
> > | Alternatively, you may set the environment variables DRI_CFLAGS
> > | and DRI_LIBS to avoid the need to call pkg-config.
> > | See the pkg-config man page for more details.
> > | + bbfatal 'oe_runconf failed'
> > | + echo 'ERROR: oe_runconf failed'
> > | ERROR: oe_runconf failed
> > | + exit 1
> > | ERROR: Function 'do_configure' failed (see /OE/tentacle/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/xserver-xorg-1_1.11.1-r0/temp/log.do_configure.3602 for further information)
> > NOTE: package xserver-xorg-1_1.11.1-r0: task do_configure: Failed
> > ERROR: Task 1842 (/OE/tentacle/sources/openembedded-core/meta/recipes-graphics/xorg-xserver/xserver-xorg_1.11.1.bb, do_configure) failed with exit code '1'
> >
> > regards,
> >
> > Koen
> ping - or how do you workaround this for machines not supporting mesa-dri?
All machines should support mesa-dri with just the swrast backend
enabled (which is the default). Xgl now requires dri. If you don't want
xgl you can use the xserver-xorg-lite recipe.
Cheers,
Richard
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2011-10-17 12:42 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-10-13 8:24 missing mesa-dri dependency? Koen Kooi
2011-10-15 12:52 ` Andreas Müller
2011-10-15 13:00 ` Martin Jansa
2011-10-15 14:02 ` Koen Kooi
2011-10-17 12:37 ` Richard Purdie
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox