* [PATCH 1/1] openjade: autoreconf to fix building on newer host systems
2012-06-02 17:34 [PATCH 0/1] Fix build failure of openjade using newer host Otavio Salvador
@ 2012-06-02 17:34 ` Otavio Salvador
2012-06-11 17:34 ` Flanagan, Elizabeth
2012-06-08 10:33 ` [PATCH 0/1] Fix build failure of openjade using newer host Richard Purdie
1 sibling, 1 reply; 9+ messages in thread
From: Otavio Salvador @ 2012-06-02 17:34 UTC (permalink / raw)
To: openembedded-core
When using an update host system the build environment fails to
properly get config.h done. To solve it we update the build system
thought use of autoreconf. The build failure was:
,----
| ...
| DssslApp.cxx:117:36: error: 'PACKAGE' was not declared in this scope
| DssslApp.cxx:118:36: error: 'VERSION' was not declared in this scope
| make[2]: *** [DssslApp.lo] Error 1
`----
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
---
.../openjade/openjade-1.3.2/autoreconf.patch |21657 ++++++++++++++++++++
.../openjade/openjade-native_1.3.2.bb | 3 +-
2 files changed, 21659 insertions(+), 1 deletions(-)
create mode 100644 meta/recipes-devtools/openjade/openjade-1.3.2/autoreconf.patch
diff --git a/meta/recipes-devtools/openjade/openjade-1.3.2/autoreconf.patch b/meta/recipes-devtools/openjade/openjade-1.3.2/autoreconf.patch
new file mode 100644
index 0000000..766f299
--- /dev/null
+++ b/meta/recipes-devtools/openjade/openjade-1.3.2/autoreconf.patch
@@ -0,0 +1,21657 @@
+openjade: autoreconf to fix building on newer host systems
+
+When using an update host system the build environment fails to properly get
+config.h done. To solve it we update the build system thought use of
+autoreconf. The build failure was:
+
+,----
+| ...
+| DssslApp.cxx: In member function 'virtual void OpenJade_DSSSL::DssslApp::processOption(OpenSP::CmdLineApp::AppChar, const AppChar*)':
+| DssslApp.cxx:117:36: error: 'PACKAGE' was not declared in this scope
+| DssslApp.cxx:118:36: error: 'VERSION' was not declared in this scope
+| make[2]: *** [DssslApp.lo] Error 1
+`----
+
+Upstream-Status: Pending
+
+Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
+
+--- openjade1.3-1.3.2.orig/configure
++++ openjade1.3-1.3.2/configure
+@@ -1,178 +1,11 @@
+ #! /bin/sh
+ # From configure.in Id: configure.in.
+ # Guess values for system-dependent variables and create Makefiles.
+-# Generated by GNU Autoconf 2.53.
++# Generated by GNU Autoconf 2.59.
+ #
+-# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
+-# Free Software Foundation, Inc.
++# Copyright (C) 2003 Free Software Foundation, Inc.
+ # This configure script is free software; the Free Software Foundation
+ # gives unlimited permission to copy, distribute and modify it.
+-
+-# Find the correct PATH separator. Usually this is `:', but
+-# DJGPP uses `;' like DOS.
+-if test "X${PATH_SEPARATOR+set}" != Xset; then
+- UNAME=${UNAME-`uname 2>/dev/null`}
+- case X$UNAME in
+- *-DOS) lt_cv_sys_path_separator=';' ;;
+- *) lt_cv_sys_path_separator=':' ;;
+- esac
+-fi
+-
+-
+-# Check that we are running under the correct shell.
+-SHELL=${CONFIG_SHELL-/bin/sh}
+-
+-case X$ECHO in
+-X*--fallback-echo)
+- # Remove one level of quotation (which was required for Make).
+- ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
+- ;;
+-esac
+-
+-echo=${ECHO-echo}
+-if test "X$1" = X--no-reexec; then
+- # Discard the --no-reexec flag, and continue.
+- shift
+-elif test "X$1" = X--fallback-echo; then
+- # Avoid inline document here, it may be left over
+- :
+-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+- # Yippee, $echo works!
+- :
+-else
+- # Restart under the correct shell.
+- exec $SHELL "$0" --no-reexec ${1+"$@"}
+-fi
+-
+-if test "X$1" = X--fallback-echo; then
+- # used as fallback echo
+- shift
+- cat <<EOF
+-
+-EOF
+- exit 0
+-fi
+-
+-# The HP-UX ksh and POSIX shell print the target directory to stdout
+-# if CDPATH is set.
+-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+-
+-if test -z "$ECHO"; then
+-if test "X${echo_test_string+set}" != Xset; then
+-# find a string as large as possible, as long as the shell can cope with it
+- for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+- if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+- echo_test_string="`eval $cmd`" &&
+- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+- then
+- break
+- fi
+- done
+-fi
+-
+-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- :
+-else
+- # The Solaris, AIX, and Digital Unix default echo programs unquote
+- # backslashes. This makes it impossible to quote backslashes using
+- # echo "$something" | sed 's/\\/\\\\/g'
+- #
+- # So, first we look for a working echo in the user's PATH.
+-
+- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
+- for dir in $PATH /usr/ucb; do
+- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- echo="$dir/echo"
+- break
+- fi
+- done
+- IFS="$save_ifs"
+-
+- if test "X$echo" = Xecho; then
+- # We didn't find a better echo, so look for alternatives.
+- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- # This shell has a builtin print -r that does the trick.
+- echo='print -r'
+- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+- test "X$CONFIG_SHELL" != X/bin/ksh; then
+- # If we have ksh, try running configure again with it.
+- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+- export ORIGINAL_CONFIG_SHELL
+- CONFIG_SHELL=/bin/ksh
+- export CONFIG_SHELL
+- exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+- else
+- # Try using printf.
+- echo='printf %s\n'
+- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- # Cool, printf works
+- :
+- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+- test "X$echo_testing_string" = 'X\t' &&
+- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+- export CONFIG_SHELL
+- SHELL="$CONFIG_SHELL"
+- export SHELL
+- echo="$CONFIG_SHELL $0 --fallback-echo"
+- elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+- test "X$echo_testing_string" = 'X\t' &&
+- echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+- test "X$echo_testing_string" = "X$echo_test_string"; then
+- echo="$CONFIG_SHELL $0 --fallback-echo"
+- else
+- # maybe with a smaller string...
+- prev=:
+-
+- for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+- then
+- break
+- fi
+- prev="$cmd"
+- done
+-
+- if test "$prev" != 'sed 50q "$0"'; then
+- echo_test_string=`eval $prev`
+- export echo_test_string
+- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+- else
+- # Oops. We lost completely, so just stick with echo.
+- echo=echo
+- fi
+- fi
+- fi
+- fi
+-fi
+-fi
+-
+-# Copy echo and quote the copy suitably for passing to libtool from
+-# the Makefile, instead of quoting the original, which is used later.
+-ECHO=$echo
+-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+- ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+-fi
+-
+-
+-
+-if expr a : '\(a\)' >/dev/null 2>&1; then
+- as_expr=expr
+-else
+- as_expr=false
+-fi
+-
+-
+ ## --------------------- ##
+ ## M4sh Initialization. ##
+ ## --------------------- ##
+@@ -181,46 +14,57 @@
+ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '${1+"$@"}'='"$@"'
+ elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+ fi
++DUALCASE=1; export DUALCASE # for MKS sh
+
+-# NLS nuisances.
+ # Support unset when possible.
+-if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+ else
+ as_unset=false
+ fi
+
+-(set +x; test -n "`(LANG=C; export LANG) 2>&1`") &&
+- { $as_unset LANG || test "${LANG+set}" != set; } ||
+- { LANG=C; export LANG; }
+-(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") &&
+- { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } ||
+- { LC_ALL=C; export LC_ALL; }
+-(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") &&
+- { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } ||
+- { LC_TIME=C; export LC_TIME; }
+-(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") &&
+- { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } ||
+- { LC_CTYPE=C; export LC_CTYPE; }
+-(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") &&
+- { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } ||
+- { LANGUAGE=C; export LANGUAGE; }
+-(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") &&
+- { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } ||
+- { LC_COLLATE=C; export LC_COLLATE; }
+-(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") &&
+- { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } ||
+- { LC_NUMERIC=C; export LC_NUMERIC; }
+-(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") &&
+- { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } ||
+- { LC_MESSAGES=C; export LC_MESSAGES; }
++
++# Work around bugs in pre-3.0 UWIN ksh.
++$as_unset ENV MAIL MAILPATH
++PS1='$ '
++PS2='> '
++PS4='+ '
++
++# NLS nuisances.
++for as_var in \
++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
++ LC_TELEPHONE LC_TIME
++do
++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
++ eval $as_var=C; export $as_var
++ else
++ $as_unset $as_var
++ fi
++done
++
++# Required to use basename.
++if expr a : '\(a\)' >/dev/null 2>&1; then
++ as_expr=expr
++else
++ as_expr=false
++fi
++
++if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
++ as_basename=basename
++else
++ as_basename=false
++fi
+
+
+ # Name of the executable.
+-as_me=`(basename "$0") 2>/dev/null ||
++as_me=`$as_basename "$0" ||
+ $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+@@ -231,6 +75,7 @@
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
++
+ # PATH needs CR, and LINENO needs CR and PATH.
+ # Avoid depending upon Character Ranges.
+ as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+@@ -241,15 +86,15 @@
+
+ # The user is always right.
+ if test "${PATH_SEPARATOR+set}" != set; then
+- echo "#! /bin/sh" >conftest.sh
+- echo "exit 0" >>conftest.sh
+- chmod +x conftest.sh
+- if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then
++ echo "#! /bin/sh" >conf$$.sh
++ echo "exit 0" >>conf$$.sh
++ chmod +x conf$$.sh
++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+- rm -f conftest.sh
++ rm -f conf$$.sh
+ fi
+
+
+@@ -297,6 +142,8 @@
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
++ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
++ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+@@ -369,13 +216,20 @@
+ fi
+ rm -f conf$$ conf$$.exe conf$$.file
+
++if mkdir -p . 2>/dev/null; then
++ as_mkdir_p=:
++else
++ test -d ./-p && rmdir ./-p
++ as_mkdir_p=false
++fi
++
+ as_executable_p="test -f"
+
+ # Sed expression to map a string onto a valid CPP name.
+-as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+ # Sed expression to map a string onto a valid variable name.
+-as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+ # IFS
+@@ -385,7 +239,165 @@
+ IFS=" $as_nl"
+
+ # CDPATH.
+-$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; }
++$as_unset CDPATH
++
++
++# Find the correct PATH separator. Usually this is `:', but
++# DJGPP uses `;' like DOS.
++if test "X${PATH_SEPARATOR+set}" != Xset; then
++ UNAME=${UNAME-`uname 2>/dev/null`}
++ case X$UNAME in
++ *-DOS) lt_cv_sys_path_separator=';' ;;
++ *) lt_cv_sys_path_separator=':' ;;
++ esac
++fi
++
++
++# Check that we are running under the correct shell.
++SHELL=${CONFIG_SHELL-/bin/sh}
++
++case X$ECHO in
++X*--fallback-echo)
++ # Remove one level of quotation (which was required for Make).
++ ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
++ ;;
++esac
++
++echo=${ECHO-echo}
++if test "X$1" = X--no-reexec; then
++ # Discard the --no-reexec flag, and continue.
++ shift
++elif test "X$1" = X--fallback-echo; then
++ # Avoid inline document here, it may be left over
++ :
++elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
++ # Yippee, $echo works!
++ :
++else
++ # Restart under the correct shell.
++ exec $SHELL "$0" --no-reexec ${1+"$@"}
++fi
++
++if test "X$1" = X--fallback-echo; then
++ # used as fallback echo
++ shift
++ cat <<EOF
++
++EOF
++ exit 0
++fi
++
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
++
++if test -z "$ECHO"; then
++if test "X${echo_test_string+set}" != Xset; then
++# find a string as large as possible, as long as the shell can cope with it
++ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
++ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
++ if (echo_test_string="`eval $cmd`") 2>/dev/null &&
++ echo_test_string="`eval $cmd`" &&
++ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
++ then
++ break
++ fi
++ done
++fi
++
++if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
++ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ :
++else
++ # The Solaris, AIX, and Digital Unix default echo programs unquote
++ # backslashes. This makes it impossible to quote backslashes using
++ # echo "$something" | sed 's/\\/\\\\/g'
++ #
++ # So, first we look for a working echo in the user's PATH.
++
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}"
++ for dir in $PATH /usr/ucb; do
++ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
++ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
++ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ echo="$dir/echo"
++ break
++ fi
++ done
++ IFS="$save_ifs"
++
++ if test "X$echo" = Xecho; then
++ # We didn't find a better echo, so look for alternatives.
++ if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
++ echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ # This shell has a builtin print -r that does the trick.
++ echo='print -r'
++ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
++ test "X$CONFIG_SHELL" != X/bin/ksh; then
++ # If we have ksh, try running configure again with it.
++ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
++ export ORIGINAL_CONFIG_SHELL
++ CONFIG_SHELL=/bin/ksh
++ export CONFIG_SHELL
++ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
++ else
++ # Try using printf.
++ echo='printf %s\n'
++ if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
++ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ # Cool, printf works
++ :
++ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
++ test "X$echo_testing_string" = 'X\t' &&
++ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
++ export CONFIG_SHELL
++ SHELL="$CONFIG_SHELL"
++ export SHELL
++ echo="$CONFIG_SHELL $0 --fallback-echo"
++ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
++ test "X$echo_testing_string" = 'X\t' &&
++ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
++ test "X$echo_testing_string" = "X$echo_test_string"; then
++ echo="$CONFIG_SHELL $0 --fallback-echo"
++ else
++ # maybe with a smaller string...
++ prev=:
++
++ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
++ if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
++ then
++ break
++ fi
++ prev="$cmd"
++ done
++
++ if test "$prev" != 'sed 50q "$0"'; then
++ echo_test_string=`eval $prev`
++ export echo_test_string
++ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
++ else
++ # Oops. We lost completely, so just stick with echo.
++ echo=echo
++ fi
++ fi
++ fi
++ fi
++fi
++fi
++
++# Copy echo and quote the copy suitably for passing to libtool from
++# the Makefile, instead of quoting the original, which is used later.
++ECHO=$echo
++if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
++ ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
++fi
++
+
+
+ # Name of the host.
+@@ -399,6 +411,7 @@
+ # Initializations.
+ #
+ ac_default_prefix=/usr/local
++ac_config_libobj_dir=.
+ cross_compiling=no
+ subdirs=
+ MFLAGS=
+@@ -455,6 +468,8 @@
+ # include <unistd.h>
+ #endif"
+
++ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO SET_MAKE TOP SPINCLUDEDIR SPLIBDIR build build_cpu build_vendor build_os host host_cpu host_vendor host_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT LN_S CXX CXXFLAGS ac_ct_CXX PERL SED CPP EGREP LIB_THREADS CXXCPP ECHO RANLIB ac_ct_RANLIB STRIP ac_ct_STRIP LIBTOOL LIBTOOL_DEPS LINKFLAGS LIBOBJS LTLIBOBJS'
++ac_subst_files=''
+
+ # Initialize some variables set by options.
+ ac_init_help=
+@@ -812,7 +827,7 @@
+
+ # Be sure to have absolute paths.
+ for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+- localstatedir libdir includedir oldincludedir infodir mandir
++ localstatedir libdir includedir oldincludedir infodir mandir
+ do
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+@@ -852,10 +867,10 @@
+ # Try the directory containing this script, then its parent.
+ ac_confdir=`(dirname "$0") 2>/dev/null ||
+ $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+- X"$0" : 'X\(//\)[^/]' \| \
+- X"$0" : 'X\(//\)$' \| \
+- X"$0" : 'X\(/\)' \| \
+- . : '\(.\)' 2>/dev/null ||
++ X"$0" : 'X\(//\)[^/]' \| \
++ X"$0" : 'X\(//\)$' \| \
++ X"$0" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
+ echo X"$0" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+@@ -878,6 +893,9 @@
+ { (exit 1); exit 1; }; }
+ fi
+ fi
++(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
++ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
++ { (exit 1); exit 1; }; }
+ srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ ac_env_build_alias_set=${build_alias+set}
+ ac_env_build_alias_value=$build_alias
+@@ -956,9 +974,9 @@
+ cat <<_ACEOF
+ Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+- [$ac_default_prefix]
++ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+- [PREFIX]
++ [PREFIX]
+
+ By default, \`make install' will install all the files in
+ \`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+@@ -1073,12 +1091,45 @@
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+ esac
+-# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
+-# absolute.
+-ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
+-ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
+-ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
+-ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
++
++# Do not use `cd foo && pwd` to compute absolute paths, because
++# the directories may not exist.
++case `pwd` in
++.) ac_abs_builddir="$ac_dir";;
++*)
++ case "$ac_dir" in
++ .) ac_abs_builddir=`pwd`;;
++ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
++ *) ac_abs_builddir=`pwd`/"$ac_dir";;
++ esac;;
++esac
++case $ac_abs_builddir in
++.) ac_abs_top_builddir=${ac_top_builddir}.;;
++*)
++ case ${ac_top_builddir}. in
++ .) ac_abs_top_builddir=$ac_abs_builddir;;
++ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
++ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
++ esac;;
++esac
++case $ac_abs_builddir in
++.) ac_abs_srcdir=$ac_srcdir;;
++*)
++ case $ac_srcdir in
++ .) ac_abs_srcdir=$ac_abs_builddir;;
++ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
++ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
++ esac;;
++esac
++case $ac_abs_builddir in
++.) ac_abs_top_srcdir=$ac_top_srcdir;;
++*)
++ case $ac_top_srcdir in
++ .) ac_abs_top_srcdir=$ac_abs_builddir;;
++ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
++ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
++ esac;;
++esac
+
+ cd $ac_dir
+ # Check for guested configure; otherwise get Cygnus style configure.
+@@ -1089,13 +1140,13 @@
+ echo
+ $SHELL $ac_srcdir/configure --help=recursive
+ elif test -f $ac_srcdir/configure.ac ||
+- test -f $ac_srcdir/configure.in; then
++ test -f $ac_srcdir/configure.in; then
+ echo
+ $ac_configure --help
+ else
+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi
+- cd $ac_popdir
++ cd "$ac_popdir"
+ done
+ fi
+
+@@ -1103,8 +1154,7 @@
+ if $ac_init_version; then
+ cat <<\_ACEOF
+
+-Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002
+-Free Software Foundation, Inc.
++Copyright (C) 2003 Free Software Foundation, Inc.
+ This configure script is free software; the Free Software Foundation
+ gives unlimited permission to copy, distribute and modify it.
+ _ACEOF
+@@ -1116,7 +1166,7 @@
+ running configure, to aid debugging if configure makes a mistake.
+
+ It was created by $as_me, which was
+-generated by GNU Autoconf 2.53. Invocation command line was
++generated by GNU Autoconf 2.59. Invocation command line was
+
+ $ $0 $@
+
+@@ -1168,27 +1218,54 @@
+
+ # Keep a trace of the command line.
+ # Strip out --no-create and --no-recursion so they do not pile up.
++# Strip out --silent because we don't want to record it for future runs.
+ # Also quote any args containing shell meta-characters.
++# Make two passes to allow for proper duplicate-argument suppression.
+ ac_configure_args=
++ac_configure_args0=
++ac_configure_args1=
+ ac_sep=
+-for ac_arg
++ac_must_keep_next=false
++for ac_pass in 1 2
+ do
+- case $ac_arg in
+- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+- | --no-cr | --no-c | -n ) continue ;;
+- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+- continue ;;
+- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+- ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+- esac
+- case " $ac_configure_args " in
+- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+- *) ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+- ac_sep=" " ;;
+- esac
+- # Get rid of the leading space.
++ for ac_arg
++ do
++ case $ac_arg in
++ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
++ | -silent | --silent | --silen | --sile | --sil)
++ continue ;;
++ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
++ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
++ esac
++ case $ac_pass in
++ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
++ 2)
++ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
++ if test $ac_must_keep_next = true; then
++ ac_must_keep_next=false # Got value, back to normal.
++ else
++ case $ac_arg in
++ *=* | --config-cache | -C | -disable-* | --disable-* \
++ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
++ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
++ | -with-* | --with-* | -without-* | --without-* | --x)
++ case "$ac_configure_args0 " in
++ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
++ esac
++ ;;
++ -* ) ac_must_keep_next=true ;;
++ esac
++ fi
++ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
++ # Get rid of the leading space.
++ ac_sep=" "
++ ;;
++ esac
++ done
+ done
++$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
++$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+ # When interrupted or exit'd, cleanup temporary files, and complete
+ # config.log. We remove comments because anyway the quotes in there
+@@ -1199,6 +1276,7 @@
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
++
+ cat <<\_ASBOX
+ ## ---------------- ##
+ ## Cache variables. ##
+@@ -1211,16 +1289,45 @@
+ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ sed -n \
+- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
++ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+ ;;
+ *)
+ sed -n \
+- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
++ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+ }
+ echo
++
++ cat <<\_ASBOX
++## ----------------- ##
++## Output variables. ##
++## ----------------- ##
++_ASBOX
++ echo
++ for ac_var in $ac_subst_vars
++ do
++ eval ac_val=$`echo $ac_var`
++ echo "$ac_var='"'"'$ac_val'"'"'"
++ done | sort
++ echo
++
++ if test -n "$ac_subst_files"; then
++ cat <<\_ASBOX
++## ------------- ##
++## Output files. ##
++## ------------- ##
++_ASBOX
++ echo
++ for ac_var in $ac_subst_files
++ do
++ eval ac_val=$`echo $ac_var`
++ echo "$ac_var='"'"'$ac_val'"'"'"
++ done | sort
++ echo
++ fi
++
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+ ## ----------- ##
+@@ -1228,14 +1335,14 @@
+ ## ----------- ##
+ _ASBOX
+ echo
+- sed "/^$/d" confdefs.h
++ sed "/^$/d" confdefs.h | sort
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ echo "$as_me: caught signal $ac_signal"
+ echo "$as_me: exit $exit_status"
+ } >&5
+- rm -f core core.* *.core &&
++ rm -f core *.core &&
+ rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+ ' 0
+@@ -1315,7 +1422,7 @@
+ # value.
+ ac_cache_corrupted=false
+ for ac_var in `(set) 2>&1 |
+- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
++ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+@@ -1332,13 +1439,13 @@
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+- { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
++ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+ echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+- { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
++ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
+ echo "$as_me: former value: $ac_old_val" >&2;}
+- { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
++ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
+ echo "$as_me: current value: $ac_new_val" >&2;}
+- ac_cache_corrupted=:
++ ac_cache_corrupted=:
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+@@ -1385,6 +1492,7 @@
+
+
+
++
+ ac_aux_dir=
+ for ac_dir in config $srcdir/config; do
+ if test -f $ac_dir/install-sh; then
+@@ -1421,6 +1529,7 @@
+ # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+ # AFS /usr/afsws/bin/install, which mishandles nonexistent args
+ # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
++# OS/2's system install, which has a completely different semantic
+ # ./install, which can be erroneously created by make from ./install.sh.
+ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+ echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+@@ -1437,6 +1546,7 @@
+ case $as_dir/ in
+ ./ | .// | /cC/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
++ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+@@ -1444,20 +1554,20 @@
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+- if test $ac_prog = install &&
+- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+- # AIX install. It has an incompatible calling convention.
+- :
+- elif test $ac_prog = install &&
+- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+- # program-specific install script used by HP pwplus--don't use.
+- :
+- else
+- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+- break 3
+- fi
+- fi
++ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
++ if test $ac_prog = install &&
++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
++ # AIX install. It has an incompatible calling convention.
++ :
++ elif test $ac_prog = install &&
++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
++ # program-specific install script used by HP pwplus--don't use.
++ :
++ else
++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
++ break 3
++ fi
++ fi
+ done
+ done
+ ;;
+@@ -1545,15 +1655,15 @@
+ program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+ rm conftest.sed
+
+-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \${MAKE}" >&5
+-echo $ECHO_N "checking whether ${MAKE-make} sets \${MAKE}... $ECHO_C" >&6
+-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'`
++echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
++echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
++set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
+ if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.make <<\_ACEOF
+ all:
+- @echo 'ac_maketemp="${MAKE}"'
++ @echo 'ac_maketemp="$(MAKE)"'
+ _ACEOF
+ # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+ eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+@@ -1751,9 +1861,6 @@
+ /usr/local/include/OpenSP) osplibdir=/usr/local/lib ;;
+ *) osplibdir=/usr/lib ;;
+ esac
+-# On PPC64 libosp is to be found in /usr/lib64; thus
+-# fall back to this directory
+-test -d ${osplibdir}64 && osplibdir=${osplibdir}64
+ echo "$as_me:$LINENO: checking location of OpenSP Library" >&5
+ echo $ECHO_N "checking location of OpenSP Library... $ECHO_C" >&6
+ # Check whether --enable-splibdir or --disable-splibdir was given.
+@@ -2048,9 +2155,7 @@
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+- set dummy "$as_dir/$ac_word" ${1+"$@"}
+- shift
+- ac_cv_prog_CC="$@"
++ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+ fi
+ fi
+@@ -2155,8 +2260,10 @@
+ fi
+
+
+-test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH" >&5
+-echo "$as_me: error: no acceptable C compiler found in \$PATH" >&2;}
++test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
++See \`config.log' for more details." >&5
++echo "$as_me: error: no acceptable C compiler found in \$PATH
++See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+
+ # Provide some information about the compiler.
+@@ -2180,15 +2287,12 @@
+ (exit $ac_status); }
+
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -2198,12 +2302,12 @@
+ }
+ _ACEOF
+ ac_clean_files_save=$ac_clean_files
+-ac_clean_files="$ac_clean_files a.out a.exe"
++ac_clean_files="$ac_clean_files a.out a.exe b.out"
+ # Try to create an executable without -o first, disregard a.out.
+ # It will help us diagnose broken compilers, and finding out an intuition
+ # of exeext.
+-echo "$as_me:$LINENO: checking for C compiler default output" >&5
+-echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6
++echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
++echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
+ ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+ if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
+ (eval $ac_link_default) 2>&5
+@@ -2217,26 +2321,39 @@
+ # Be careful to initialize this variable, since it used to be cached.
+ # Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
+ ac_cv_exeext=
+-for ac_file in `ls a_out.exe a.exe conftest.exe 2>/dev/null;
+- ls a.out conftest 2>/dev/null;
+- ls a.* conftest.* 2>/dev/null`; do
++# b.out is created by i960 compilers.
++for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
++do
++ test -f "$ac_file" || continue
+ case $ac_file in
+- *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb | *.xSYM ) ;;
+- a.out ) # We found the default executable, but exeext='' is most
+- # certainly right.
+- break;;
+- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+- # FIXME: I believe we export ac_cv_exeext for Libtool --akim.
+- export ac_cv_exeext
+- break;;
+- * ) break;;
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
++ ;;
++ conftest.$ac_ext )
++ # This is the source file.
++ ;;
++ [ab].out )
++ # We found the default executable, but exeext='' is most
++ # certainly right.
++ break;;
++ *.* )
++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
++ # FIXME: I believe we export ac_cv_exeext for Libtool,
++ # but it would be cool to find out if it's true. Does anybody
++ # maintain Libtool? --akim.
++ export ac_cv_exeext
++ break;;
++ * )
++ break;;
+ esac
+ done
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
+-{ { echo "$as_me:$LINENO: error: C compiler cannot create executables" >&5
+-echo "$as_me: error: C compiler cannot create executables" >&2;}
++sed 's/^/| /' conftest.$ac_ext >&5
++
++{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
++See \`config.log' for more details." >&5
++echo "$as_me: error: C compiler cannot create executables
++See \`config.log' for more details." >&2;}
+ { (exit 77); exit 77; }; }
+ fi
+
+@@ -2263,9 +2380,11 @@
+ cross_compiling=yes
+ else
+ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+-If you meant to cross compile, use \`--host'." >&5
++If you meant to cross compile, use \`--host'.
++See \`config.log' for more details." >&5
+ echo "$as_me: error: cannot run C compiled programs.
+-If you meant to cross compile, use \`--host'." >&2;}
++If you meant to cross compile, use \`--host'.
++See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ fi
+@@ -2273,7 +2392,7 @@
+ echo "$as_me:$LINENO: result: yes" >&5
+ echo "${ECHO_T}yes" >&6
+
+-rm -f a.out a.exe conftest$ac_cv_exeext
++rm -f a.out a.exe conftest$ac_cv_exeext b.out
+ ac_clean_files=$ac_clean_files_save
+ # Check the compiler produces executables we can run. If not, either
+ # the compiler is broken, or we cross compile.
+@@ -2293,18 +2412,21 @@
+ # catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+ # work properly (i.e., refer to `conftest.exe'), while it won't with
+ # `rm'.
+-for ac_file in `(ls conftest.exe; ls conftest; ls conftest.*) 2>/dev/null`; do
++for ac_file in conftest.exe conftest conftest.*; do
++ test -f "$ac_file" || continue
+ case $ac_file in
+- *.$ac_ext | *.o | *.obj | *.xcoff | *.tds | *.d | *.pdb ) ;;
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+- export ac_cv_exeext
+- break;;
++ export ac_cv_exeext
++ break;;
+ * ) break;;
+ esac
+ done
+ else
+- { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link" >&5
+-echo "$as_me: error: cannot compute suffix of executables: cannot compile and link" >&2;}
++ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
++See \`config.log' for more details." >&5
++echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
++See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+@@ -2321,15 +2443,12 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -2346,16 +2465,19 @@
+ (exit $ac_status); }; then
+ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+ case $ac_file in
+- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb ) ;;
++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+ done
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
+-{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile" >&5
+-echo "$as_me: error: cannot compute suffix of object files: cannot compile" >&2;}
++sed 's/^/| /' conftest.$ac_ext >&5
++
++{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
++See \`config.log' for more details." >&5
++echo "$as_me: error: cannot compute suffix of object files: cannot compile
++See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+@@ -2371,15 +2493,12 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -2393,11 +2512,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -2406,10 +2534,11 @@
+ ac_compiler_gnu=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_compiler_gnu=no
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+ fi
+@@ -2425,15 +2554,12 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -2444,11 +2570,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -2457,10 +2592,11 @@
+ ac_cv_prog_cc_g=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_prog_cc_g=no
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+ echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+@@ -2479,6 +2615,120 @@
+ CFLAGS=
+ fi
+ fi
++echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
++echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
++if test "${ac_cv_prog_cc_stdc+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ ac_cv_prog_cc_stdc=no
++ac_save_CC=$CC
++cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++#include <stdarg.h>
++#include <stdio.h>
++#include <sys/types.h>
++#include <sys/stat.h>
++/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
++struct buf { int x; };
++FILE * (*rcsopen) (struct buf *, struct stat *, int);
++static char *e (p, i)
++ char **p;
++ int i;
++{
++ return p[i];
++}
++static char *f (char * (*g) (char **, int), char **p, ...)
++{
++ char *s;
++ va_list v;
++ va_start (v,p);
++ s = g (p, va_arg (v,int));
++ va_end (v);
++ return s;
++}
++
++/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
++ function prototypes and stuff, but not '\xHH' hex character constants.
++ These don't provoke an error unfortunately, instead are silently treated
++ as 'x'. The following induces an error, until -std1 is added to get
++ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
++ array size at least. It's necessary to write '\x00'==0 to get something
++ that's true only with -std1. */
++int osf4_cc_array ['\x00' == 0 ? 1 : -1];
++
++int test (int i, double x);
++struct s1 {int (*f) (int a);};
++struct s2 {int (*f) (double a);};
++int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
++int argc;
++char **argv;
++int
++main ()
++{
++return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
++ ;
++ return 0;
++}
++_ACEOF
++# Don't try gcc -ansi; that turns off useful extensions and
++# breaks some systems' header files.
++# AIX -qlanglvl=ansi
++# Ultrix and OSF/1 -std1
++# HP-UX 10.20 and later -Ae
++# HP-UX older versions -Aa -D_HPUX_SOURCE
++# SVR4 -Xc -D__EXTENSIONS__
++for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
++do
++ CC="$ac_save_CC $ac_arg"
++ rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_prog_cc_stdc=$ac_arg
++break
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++fi
++rm -f conftest.err conftest.$ac_objext
++done
++rm -f conftest.$ac_ext conftest.$ac_objext
++CC=$ac_save_CC
++
++fi
++
++case "x$ac_cv_prog_cc_stdc" in
++ x|xno)
++ echo "$as_me:$LINENO: result: none needed" >&5
++echo "${ECHO_T}none needed" >&6 ;;
++ *)
++ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
++echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
++ CC="$CC $ac_cv_prog_cc_stdc" ;;
++esac
++
+ # Some people use a C++ compiler to compile C. Since we use `exit',
+ # in C++ we need to declare it. In case someone uses the same compiler
+ # for both compiling C and C++ we need to have the C++ compiler decide
+@@ -2490,19 +2740,27 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ for ac_declaration in \
+- ''\
+- '#include <stdlib.h>' \
++ '' \
+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
+ 'extern "C" void std::exit (int); using std::exit;' \
+ 'extern "C" void exit (int) throw ();' \
+@@ -2510,16 +2768,13 @@
+ 'void exit (int);'
+ do
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
+-#include <stdlib.h>
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_declaration
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
++#include <stdlib.h>
+ int
+ main ()
+ {
+@@ -2530,11 +2785,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -2543,20 +2807,18 @@
+ :
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ continue
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_declaration
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -2567,11 +2829,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -2580,9 +2851,10 @@
+ break
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+ rm -f conftest*
+ if test -n "$ac_declaration"; then
+@@ -2593,9 +2865,10 @@
+
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_ext=c
+ ac_cpp='$CPP $CPPFLAGS'
+ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+@@ -2613,6 +2886,7 @@
+ # AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+ # AFS /usr/afsws/bin/install, which mishandles nonexistent args
+ # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
++# OS/2's system install, which has a completely different semantic
+ # ./install, which can be erroneously created by make from ./install.sh.
+ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+ echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+@@ -2629,6 +2903,7 @@
+ case $as_dir/ in
+ ./ | .// | /cC/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
++ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+@@ -2636,20 +2911,20 @@
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+- if test $ac_prog = install &&
+- grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+- # AIX install. It has an incompatible calling convention.
+- :
+- elif test $ac_prog = install &&
+- grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+- # program-specific install script used by HP pwplus--don't use.
+- :
+- else
+- ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+- break 3
+- fi
+- fi
++ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
++ if test $ac_prog = install &&
++ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
++ # AIX install. It has an incompatible calling convention.
++ :
++ elif test $ac_prog = install &&
++ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
++ # program-specific install script used by HP pwplus--don't use.
++ :
++ else
++ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
++ break 3
++ fi
++ fi
+ done
+ done
+ ;;
+@@ -2809,15 +3084,12 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -2831,11 +3103,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -2844,10 +3125,11 @@
+ ac_compiler_gnu=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_compiler_gnu=no
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+ fi
+@@ -2863,15 +3145,12 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -2882,11 +3161,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -2895,10 +3183,11 @@
+ ac_cv_prog_cxx_g=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_prog_cxx_g=no
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
+ echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6
+@@ -2918,8 +3207,7 @@
+ fi
+ fi
+ for ac_declaration in \
+- ''\
+- '#include <stdlib.h>' \
++ '' \
+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
+ 'extern "C" void std::exit (int); using std::exit;' \
+ 'extern "C" void exit (int) throw ();' \
+@@ -2927,16 +3215,13 @@
+ 'void exit (int);'
+ do
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
+-#include <stdlib.h>
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_declaration
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
++#include <stdlib.h>
+ int
+ main ()
+ {
+@@ -2947,11 +3232,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -2960,20 +3254,18 @@
+ :
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ continue
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_declaration
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -2984,11 +3276,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -2997,9 +3298,10 @@
+ break
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+ rm -f conftest*
+ if test -n "$ac_declaration"; then
+@@ -3059,6 +3361,51 @@
+ done
+ test -n "$PERL" || PERL="perl"
+
++for ac_prog in sed
++do
++ # Extract the first word of "$ac_prog", so it can be a program name with args.
++set dummy $ac_prog; ac_word=$2
++echo "$as_me:$LINENO: checking for $ac_word" >&5
++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
++if test "${ac_cv_path_SED+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ case $SED in
++ [\\/]* | ?:[\\/]*)
++ ac_cv_path_SED="$SED" # Let the user override the test with a path.
++ ;;
++ *)
++ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
++for as_dir in $PATH
++do
++ IFS=$as_save_IFS
++ test -z "$as_dir" && as_dir=.
++ for ac_exec_ext in '' $ac_executable_extensions; do
++ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
++ ac_cv_path_SED="$as_dir/$ac_word$ac_exec_ext"
++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
++ break 2
++ fi
++done
++done
++
++ ;;
++esac
++fi
++SED=$ac_cv_path_SED
++
++if test -n "$SED"; then
++ echo "$as_me:$LINENO: result: $SED" >&5
++echo "${ECHO_T}$SED" >&6
++else
++ echo "$as_me:$LINENO: result: no" >&5
++echo "${ECHO_T}no" >&6
++fi
++
++ test -n "$SED" && break
++done
++test -n "$SED" || SED="sed"
++
+ test "$INSTALL" = "./config/install-sh -c" && INSTALL=`pwd`"/config/install-sh -c"
+
+
+@@ -3069,11 +3416,6 @@
+ *)
+ if test "$GXX"
+ then
+- echo "$as_me:$LINENO: checking whether GNU C++ supports automatic template instantiation" >&5
+-echo $ECHO_N "checking whether GNU C++ supports automatic template instantiation... $ECHO_C" >&6
+-if test "${ac_cv_c_gnu_automatic_templates+set}" = set; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
+-else
+
+ ac_ext=c
+ ac_cpp='$CPP $CPPFLAGS'
+@@ -3098,24 +3440,34 @@
+ do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
++ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
+-#include <assert.h>
+- Syntax error
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++ Syntax error
+ _ACEOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+- egrep -v '^ *\+' conftest.er1 >conftest.err
++ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
++ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+@@ -3126,7 +3478,8 @@
+ :
+ else
+ echo "$as_me: failed program was:" >&5
+- cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ # Broken: fails on valid input.
+ continue
+ fi
+@@ -3135,20 +3488,24 @@
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ #include <ac_nonexistent.h>
+ _ACEOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+- egrep -v '^ *\+' conftest.er1 >conftest.err
++ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
++ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+@@ -3160,7 +3517,8 @@
+ continue
+ else
+ echo "$as_me: failed program was:" >&5
+- cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ # Passes both tests.
+ ac_preproc_ok=:
+ break
+@@ -3189,24 +3547,34 @@
+ do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
++ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
+-#include <assert.h>
+- Syntax error
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++ Syntax error
+ _ACEOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+- egrep -v '^ *\+' conftest.er1 >conftest.err
++ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
++ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+@@ -3217,7 +3585,8 @@
+ :
+ else
+ echo "$as_me: failed program was:" >&5
+- cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ # Broken: fails on valid input.
+ continue
+ fi
+@@ -3226,20 +3595,24 @@
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ #include <ac_nonexistent.h>
+ _ACEOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+- egrep -v '^ *\+' conftest.er1 >conftest.err
++ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
++ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+@@ -3251,7 +3624,8 @@
+ continue
+ else
+ echo "$as_me: failed program was:" >&5
+- cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ # Passes both tests.
+ ac_preproc_ok=:
+ break
+@@ -3264,8 +3638,10 @@
+ if $ac_preproc_ok; then
+ :
+ else
+- { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check" >&5
+-echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check" >&2;}
++ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
++See \`config.log' for more details." >&5
++echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
++See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+@@ -3276,9 +3652,32 @@
+ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+-cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++echo "$as_me:$LINENO: checking for egrep" >&5
++echo $ECHO_N "checking for egrep... $ECHO_C" >&6
++if test "${ac_cv_prog_egrep+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ if echo a | (grep -E '(a|b)') >/dev/null 2>&1
++ then ac_cv_prog_egrep='grep -E'
++ else ac_cv_prog_egrep='egrep'
++ fi
++fi
++echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
++echo "${ECHO_T}$ac_cv_prog_egrep" >&6
++ EGREP=$ac_cv_prog_egrep
++
++
++echo "$as_me:$LINENO: checking whether GNU C++ supports automatic template instantiation" >&5
++echo $ECHO_N "checking whether GNU C++ supports automatic template instantiation... $ECHO_C" >&6
++if test "${ac_cv_c_gnu_automatic_templates+set}" = set; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+ #if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ > 8)
+ yes
+@@ -3286,7 +3685,7 @@
+
+ _ACEOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- egrep "yes" >/dev/null 2>&1; then
++ $EGREP "yes" >/dev/null 2>&1; then
+ ac_cv_c_gnu_automatic_templates=yes
+ else
+ ac_cv_c_gnu_automatic_templates=no
+@@ -3321,49 +3720,67 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ #include <stdlib.h>
+ #include <stdarg.h>
+ #include <string.h>
+ #include <float.h>
+
++int
++main ()
++{
++
++ ;
++ return 0;
++}
+ _ACEOF
+-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+- egrep -v '^ *\+' conftest.er1 >conftest.err
++ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } >/dev/null; then
+- if test -s conftest.err; then
+- ac_cpp_err=$ac_c_preproc_warn_flag
+- else
+- ac_cpp_err=
+- fi
+-else
+- ac_cpp_err=yes
+-fi
+-if test -z "$ac_cpp_err"; then
++ (exit $ac_status); } &&
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
+ ac_cv_header_stdc=yes
+ else
+ echo "$as_me: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- ac_cv_header_stdc=no
++sed 's/^/| /' conftest.$ac_ext >&5
++
++ac_cv_header_stdc=no
+ fi
+-rm -f conftest.err conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+ if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ #include <string.h>
+
+ _ACEOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- egrep "memchr" >/dev/null 2>&1; then
++ $EGREP "memchr" >/dev/null 2>&1; then
+ :
+ else
+ ac_cv_header_stdc=no
+@@ -3375,13 +3792,16 @@
+ if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ #include <stdlib.h>
+
+ _ACEOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- egrep "free" >/dev/null 2>&1; then
++ $EGREP "free" >/dev/null 2>&1; then
+ :
+ else
+ ac_cv_header_stdc=no
+@@ -3396,16 +3816,20 @@
+ :
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ #include <ctype.h>
+ #if ((' ' & 0x0FF) == 0x020)
+ # define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+ # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+ #else
+-# define ISLOWER(c) (('a' <= (c) && (c) <= 'i') \
+- || ('j' <= (c) && (c) <= 'r') \
+- || ('s' <= (c) && (c) <= 'z'))
++# define ISLOWER(c) \
++ (('a' <= (c) && (c) <= 'i') \
++ || ('j' <= (c) && (c) <= 'r') \
++ || ('s' <= (c) && (c) <= 'z'))
+ # define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+ #endif
+
+@@ -3416,7 +3840,7 @@
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+- || toupper (i) != TOUPPER (i))
++ || toupper (i) != TOUPPER (i))
+ exit(2);
+ exit (0);
+ }
+@@ -3436,11 +3860,12 @@
+ else
+ echo "$as_me: program exited with status $ac_status" >&5
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ( exit $ac_status )
+ ac_cv_header_stdc=no
+ fi
+-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
++rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+ fi
+ fi
+ fi
+@@ -3465,7 +3890,7 @@
+
+
+ for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+- inttypes.h stdint.h unistd.h
++ inttypes.h stdint.h unistd.h
+ do
+ as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+@@ -3474,19 +3899,31 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+
+ #include <$ac_header>
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -3495,10 +3932,11 @@
+ eval "$as_ac_Header=yes"
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ eval "$as_ac_Header=no"
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+ echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+ echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+@@ -3529,18 +3967,30 @@
+ echo "$as_me:$LINENO: checking $ac_header usability" >&5
+ echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+ #include <$ac_header>
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -3549,10 +3999,11 @@
+ ac_header_compiler=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_header_compiler=no
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+ echo "${ECHO_T}$ac_header_compiler" >&6
+
+@@ -3560,169 +4011,94 @@
+ echo "$as_me:$LINENO: checking $ac_header presence" >&5
+ echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ #include <$ac_header>
+ _ACEOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+- egrep -v '^ *\+' conftest.er1 >conftest.err
++ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } >/dev/null; then
+- if test -s conftest.err; then
+- ac_cpp_err=$ac_c_preproc_warn_flag
+- else
+- ac_cpp_err=
+- fi
+-else
+- ac_cpp_err=yes
+-fi
+-if test -z "$ac_cpp_err"; then
+- ac_header_preproc=yes
+-else
+- echo "$as_me: failed program was:" >&5
+- cat conftest.$ac_ext >&5
+- ac_header_preproc=no
+-fi
+-rm -f conftest.err conftest.$ac_ext
+-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+-echo "${ECHO_T}$ac_header_preproc" >&6
+-
+-# So? What about this header?
+-case $ac_header_compiler:$ac_header_preproc in
+- yes:no )
+- { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+-echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+- no:yes )
+- { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+-echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+-esac
+-echo "$as_me:$LINENO: checking for $ac_header" >&5
+-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+-if eval "test \"\${$as_ac_Header+set}\" = set"; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
+-else
+- eval "$as_ac_Header=$ac_header_preproc"
+-fi
+-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+-
+-fi
+-if test `eval echo '${'$as_ac_Header'}'` = yes; then
+- cat >>confdefs.h <<_ACEOF
+-#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+-_ACEOF
+-
+-fi
+-
+-done
+-
+-
+-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+-if test "${ac_cv_prog_cc_stdc+set}" = set; then
+- echo $ECHO_N "(cached) $ECHO_C" >&6
+-else
+- ac_cv_prog_cc_stdc=no
+-ac_save_CC=$CC
+-cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
+-#include <stdarg.h>
+-#include <stdio.h>
+-#include <sys/types.h>
+-#include <sys/stat.h>
+-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+-struct buf { int x; };
+-FILE * (*rcsopen) (struct buf *, struct stat *, int);
+-static char *e (p, i)
+- char **p;
+- int i;
+-{
+- return p[i];
+-}
+-static char *f (char * (*g) (char **, int), char **p, ...)
+-{
+- char *s;
+- va_list v;
+- va_start (v,p);
+- s = g (p, va_arg (v,int));
+- va_end (v);
+- return s;
+-}
+-int test (int i, double x);
+-struct s1 {int (*f) (int a);};
+-struct s2 {int (*f) (double a);};
+-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+-int argc;
+-char **argv;
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+-int
+-main ()
+-{
+-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+- ;
+- return 0;
+-}
+-_ACEOF
+-# Don't try gcc -ansi; that turns off useful extensions and
+-# breaks some systems' header files.
+-# AIX -qlanglvl=ansi
+-# Ultrix and OSF/1 -std1
+-# HP-UX 10.20 and later -Ae
+-# HP-UX older versions -Aa -D_HPUX_SOURCE
+-# SVR4 -Xc -D__EXTENSIONS__
+-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+-do
+- CC="$ac_save_CC $ac_arg"
+- rm -f conftest.$ac_objext
+-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
+- ac_status=$?
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
+- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+- (eval $ac_try) 2>&5
+- ac_status=$?
+- echo "$as_me:$LINENO: \$? = $ac_status" >&5
+- (exit $ac_status); }; }; then
+- ac_cv_prog_cc_stdc=$ac_arg
+-break
++ (exit $ac_status); } >/dev/null; then
++ if test -s conftest.err; then
++ ac_cpp_err=$ac_c_preproc_warn_flag
++ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
++ else
++ ac_cpp_err=
++ fi
+ else
+- echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++ ac_cpp_err=yes
+ fi
+-rm -f conftest.$ac_objext
+-done
+-rm -f conftest.$ac_ext conftest.$ac_objext
+-CC=$ac_save_CC
++if test -z "$ac_cpp_err"; then
++ ac_header_preproc=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
+
++ ac_header_preproc=no
+ fi
++rm -f conftest.err conftest.$ac_ext
++echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
++echo "${ECHO_T}$ac_header_preproc" >&6
+
+-case "x$ac_cv_prog_cc_stdc" in
+- x|xno)
+- echo "$as_me:$LINENO: result: none needed" >&5
+-echo "${ECHO_T}none needed" >&6 ;;
+- *)
+- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+- CC="$CC $ac_cv_prog_cc_stdc" ;;
++# So? What about this header?
++case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
++ yes:no: )
++ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
++echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
++echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
++ ac_header_preproc=yes
++ ;;
++ no:yes:* )
++ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
++echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
++echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
++echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
++echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
++echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
++echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
++ (
++ cat <<\_ASBOX
++## ------------------------------------------ ##
++## Report this to the AC_PACKAGE_NAME lists. ##
++## ------------------------------------------ ##
++_ASBOX
++ ) |
++ sed "s/^/$as_me: WARNING: /" >&2
++ ;;
+ esac
++echo "$as_me:$LINENO: checking for $ac_header" >&5
++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
++if eval "test \"\${$as_ac_Header+set}\" = set"; then
++ echo $ECHO_N "(cached) $ECHO_C" >&6
++else
++ eval "$as_ac_Header=\$ac_header_preproc"
++fi
++echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
++echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
++
++fi
++if test `eval echo '${'$as_ac_Header'}'` = yes; then
++ cat >>confdefs.h <<_ACEOF
++#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
++_ACEOF
++
++fi
++
++done
++
+
+ echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
+ echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6
+@@ -3730,15 +4106,12 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -3795,11 +4168,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -3808,10 +4190,11 @@
+ ac_cv_c_const=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_c_const=no
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
+ echo "${ECHO_T}$ac_cv_c_const" >&6
+@@ -3831,21 +4214,34 @@
+ ac_cv_c_inline=no
+ for ac_kw in inline __inline__ __inline; do
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ #ifndef __cplusplus
+-static $ac_kw int static_foo () {return 0; }
+-$ac_kw int foo () {return 0; }
++typedef int foo_t;
++static $ac_kw foo_t static_foo () {return 0; }
++$ac_kw foo_t foo () {return 0; }
+ #endif
+
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -3854,25 +4250,30 @@
+ ac_cv_c_inline=$ac_kw; break
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5
+ echo "${ECHO_T}$ac_cv_c_inline" >&6
++
++
+ case $ac_cv_c_inline in
+ inline | yes) ;;
+- no)
+-cat >>confdefs.h <<\_ACEOF
+-#define inline
+-_ACEOF
+- ;;
+- *) cat >>confdefs.h <<_ACEOF
+-#define inline $ac_cv_c_inline
++ *)
++ case $ac_cv_c_inline in
++ no) ac_val=;;
++ *) ac_val=$ac_cv_c_inline;;
++ esac
++ cat >>confdefs.h <<_ACEOF
++#ifndef __cplusplus
++#define inline $ac_val
++#endif
+ _ACEOF
+- ;;
++ ;;
+ esac
+
+ echo "$as_me:$LINENO: checking for size_t" >&5
+@@ -3881,15 +4282,12 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -3903,11 +4301,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -3916,10 +4323,11 @@
+ ac_cv_type_size_t=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_type_size_t=no
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
+ echo "${ECHO_T}$ac_cv_type_size_t" >&6
+@@ -3940,15 +4348,12 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -3961,11 +4366,63 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
++ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); } &&
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; }; then
++ ac_cv_member_struct_stat_st_blksize=yes
++else
++ echo "$as_me: failed program was:" >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
++cat >conftest.$ac_ext <<_ACEOF
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++$ac_includes_default
++int
++main ()
++{
++static struct stat ac_aggr;
++if (sizeof ac_aggr.st_blksize)
++return 0;
++ ;
++ return 0;
++}
++_ACEOF
++rm -f conftest.$ac_objext
++if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -3974,10 +4431,13 @@
+ ac_cv_member_struct_stat_st_blksize=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_member_struct_stat_st_blksize=no
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
++fi
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_member_struct_stat_st_blksize" >&5
+ echo "${ECHO_T}$ac_cv_member_struct_stat_st_blksize" >&6
+@@ -4001,15 +4461,12 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ #include <signal.h>
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -4020,11 +4477,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+- (eval $ac_link) 2>&5
++ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest$ac_exeext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4033,10 +4499,12 @@
+ ac_cv_have_sig_atomic_t=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_have_sig_atomic_t=no
+ fi
+-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_have_sig_atomic_t" >&5
+ echo "${ECHO_T}$ac_cv_have_sig_atomic_t" >&6
+@@ -4048,15 +4516,12 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -4070,11 +4535,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4083,10 +4557,11 @@
+ ac_cv_type_sig_atomic_t=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_type_sig_atomic_t=no
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_type_sig_atomic_t" >&5
+ echo "${ECHO_T}$ac_cv_type_sig_atomic_t" >&6
+@@ -4108,15 +4583,12 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -4130,11 +4602,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4143,10 +4624,11 @@
+ ac_cv_type_size_t=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_type_size_t=no
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
+ echo "${ECHO_T}$ac_cv_type_size_t" >&6
+@@ -4164,15 +4646,12 @@
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -4185,11 +4664,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4198,15 +4686,12 @@
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -4219,11 +4704,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4232,29 +4726,28 @@
+ ac_hi=$ac_mid; break
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_lo=`expr $ac_mid + 1`
+- if test $ac_lo -le $ac_mid; then
+- ac_lo= ac_hi=
+- break
+- fi
+- ac_mid=`expr 2 '*' $ac_mid + 1`
++ if test $ac_lo -le $ac_mid; then
++ ac_lo= ac_hi=
++ break
++ fi
++ ac_mid=`expr 2 '*' $ac_mid + 1`
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -4267,11 +4760,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4280,15 +4782,12 @@
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -4301,11 +4800,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4314,37 +4822,36 @@
+ ac_lo=$ac_mid; break
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_hi=`expr '(' $ac_mid ')' - 1`
+- if test $ac_mid -le $ac_hi; then
+- ac_lo= ac_hi=
+- break
+- fi
+- ac_mid=`expr 2 '*' $ac_mid`
++ if test $ac_mid -le $ac_hi; then
++ ac_lo= ac_hi=
++ break
++ fi
++ ac_mid=`expr 2 '*' $ac_mid`
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_lo= ac_hi=
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ # Binary search between lo and hi bounds.
+ while test "x$ac_lo" != "x$ac_hi"; do
+ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -4357,11 +4864,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4370,37 +4886,37 @@
+ ac_hi=$ac_mid
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_lo=`expr '(' $ac_mid ')' + 1`
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+ case $ac_lo in
+ ?*) ac_cv_sizeof_size_t=$ac_lo;;
+-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (size_t), 77" >&5
+-echo "$as_me: error: cannot compute sizeof (size_t), 77" >&2;}
++'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (size_t), 77
++See \`config.log' for more details." >&5
++echo "$as_me: error: cannot compute sizeof (size_t), 77
++See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+ else
+ if test "$cross_compiling" = yes; then
+- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
+-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
++ { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
++echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
+ { (exit 1); exit 1; }; }
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+ long longval () { return (long) (sizeof (size_t)); }
+ unsigned long ulongval () { return (long) (sizeof (size_t)); }
+ #include <stdio.h>
+ #include <stdlib.h>
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -4443,13 +4959,16 @@
+ else
+ echo "$as_me: program exited with status $ac_status" >&5
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ( exit $ac_status )
+-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (size_t), 77" >&5
+-echo "$as_me: error: cannot compute sizeof (size_t), 77" >&2;}
++{ { echo "$as_me:$LINENO: error: cannot compute sizeof (size_t), 77
++See \`config.log' for more details." >&5
++echo "$as_me: error: cannot compute sizeof (size_t), 77
++See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
++rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+ fi
+ fi
+ rm -f conftest.val
+@@ -4470,15 +4989,12 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -4492,11 +5008,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4505,10 +5030,11 @@
+ ac_cv_type_unsigned_int=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_type_unsigned_int=no
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_type_unsigned_int" >&5
+ echo "${ECHO_T}$ac_cv_type_unsigned_int" >&6
+@@ -4526,15 +5052,12 @@
+ if test "$cross_compiling" = yes; then
+ # Depending upon the size, compute the lo and hi bounds.
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -4547,11 +5070,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4560,15 +5092,12 @@
+ ac_lo=0 ac_mid=0
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -4581,11 +5110,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4594,29 +5132,28 @@
+ ac_hi=$ac_mid; break
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_lo=`expr $ac_mid + 1`
+- if test $ac_lo -le $ac_mid; then
+- ac_lo= ac_hi=
+- break
+- fi
+- ac_mid=`expr 2 '*' $ac_mid + 1`
++ if test $ac_lo -le $ac_mid; then
++ ac_lo= ac_hi=
++ break
++ fi
++ ac_mid=`expr 2 '*' $ac_mid + 1`
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -4629,11 +5166,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4642,15 +5188,12 @@
+ ac_hi=-1 ac_mid=-1
+ while :; do
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -4663,11 +5206,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4676,37 +5228,36 @@
+ ac_lo=$ac_mid; break
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_hi=`expr '(' $ac_mid ')' - 1`
+- if test $ac_mid -le $ac_hi; then
+- ac_lo= ac_hi=
+- break
+- fi
+- ac_mid=`expr 2 '*' $ac_mid`
++ if test $ac_mid -le $ac_hi; then
++ ac_lo= ac_hi=
++ break
++ fi
++ ac_mid=`expr 2 '*' $ac_mid`
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_lo= ac_hi=
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ # Binary search between lo and hi bounds.
+ while test "x$ac_lo" != "x$ac_hi"; do
+ ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -4719,11 +5270,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4732,37 +5292,37 @@
+ ac_hi=$ac_mid
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_lo=`expr '(' $ac_mid ')' + 1`
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ done
+ case $ac_lo in
+ ?*) ac_cv_sizeof_unsigned_int=$ac_lo;;
+-'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned int), 77" >&5
+-echo "$as_me: error: cannot compute sizeof (unsigned int), 77" >&2;}
++'') { { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned int), 77
++See \`config.log' for more details." >&5
++echo "$as_me: error: cannot compute sizeof (unsigned int), 77
++See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+ else
+ if test "$cross_compiling" = yes; then
+- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling" >&5
+-echo "$as_me: error: cannot run test program while cross compiling" >&2;}
++ { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
++echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
+ { (exit 1); exit 1; }; }
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+ long longval () { return (long) (sizeof (unsigned int)); }
+ unsigned long ulongval () { return (long) (sizeof (unsigned int)); }
+ #include <stdio.h>
+ #include <stdlib.h>
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -4805,13 +5365,16 @@
+ else
+ echo "$as_me: program exited with status $ac_status" >&5
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ( exit $ac_status )
+-{ { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned int), 77" >&5
+-echo "$as_me: error: cannot compute sizeof (unsigned int), 77" >&2;}
++{ { echo "$as_me:$LINENO: error: cannot compute sizeof (unsigned int), 77
++See \`config.log' for more details." >&5
++echo "$as_me: error: cannot compute sizeof (unsigned int), 77
++See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+-rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
++rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+ fi
+ fi
+ rm -f conftest.val
+@@ -4834,49 +5397,72 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++/* Define setlocale to an innocuous variant, in case <limits.h> declares setlocale.
++ For example, HP-UX 11i <limits.h> declares gettimeofday. */
++#define setlocale innocuous_setlocale
++
+ /* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char setlocale (); below. */
+-#include <assert.h>
++ which can conflict with char setlocale (); below.
++ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ <limits.h> exists even on freestanding compilers. */
++
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++
++#undef setlocale
++
+ /* Override any gcc2 internal prototype to avoid an error. */
+ #ifdef __cplusplus
+ extern "C"
++{
+ #endif
+ /* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+ char setlocale ();
+-char (*f) ();
+-
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+-int
+-main ()
+-{
+ /* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+ #if defined (__stub_setlocale) || defined (__stub___setlocale)
+ choke me
+ #else
+-f = setlocale;
++char (*f) () = setlocale;
++#endif
++#ifdef __cplusplus
++}
+ #endif
+
++int
++main ()
++{
++return f != setlocale;
+ ;
+ return 0;
+ }
+ _ACEOF
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+- (eval $ac_link) 2>&5
++ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest$ac_exeext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4885,10 +5471,12 @@
+ ac_cv_func_setlocale=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_func_setlocale=no
+ fi
+-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_func_setlocale" >&5
+ echo "${ECHO_T}$ac_cv_func_setlocale" >&6
+@@ -4905,49 +5493,72 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++/* Define towupper to an innocuous variant, in case <limits.h> declares towupper.
++ For example, HP-UX 11i <limits.h> declares gettimeofday. */
++#define towupper innocuous_towupper
++
+ /* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char towupper (); below. */
+-#include <assert.h>
++ which can conflict with char towupper (); below.
++ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ <limits.h> exists even on freestanding compilers. */
++
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++
++#undef towupper
++
+ /* Override any gcc2 internal prototype to avoid an error. */
+ #ifdef __cplusplus
+ extern "C"
++{
+ #endif
+ /* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+ char towupper ();
+-char (*f) ();
+-
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+-int
+-main ()
+-{
+ /* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+ #if defined (__stub_towupper) || defined (__stub___towupper)
+ choke me
+ #else
+-f = towupper;
++char (*f) () = towupper;
++#endif
++#ifdef __cplusplus
++}
+ #endif
+
++int
++main ()
++{
++return f != towupper;
+ ;
+ return 0;
+ }
+ _ACEOF
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+- (eval $ac_link) 2>&5
++ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest$ac_exeext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -4956,10 +5567,12 @@
+ ac_cv_func_towupper=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_func_towupper=no
+ fi
+-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_func_towupper" >&5
+ echo "${ECHO_T}$ac_cv_func_towupper" >&6
+@@ -4976,49 +5589,72 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++/* Define gettext to an innocuous variant, in case <limits.h> declares gettext.
++ For example, HP-UX 11i <limits.h> declares gettimeofday. */
++#define gettext innocuous_gettext
++
+ /* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char gettext (); below. */
+-#include <assert.h>
++ which can conflict with char gettext (); below.
++ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ <limits.h> exists even on freestanding compilers. */
++
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++
++#undef gettext
++
+ /* Override any gcc2 internal prototype to avoid an error. */
+ #ifdef __cplusplus
+ extern "C"
++{
+ #endif
+ /* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+ char gettext ();
+-char (*f) ();
+-
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+-int
+-main ()
+-{
+ /* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+ #if defined (__stub_gettext) || defined (__stub___gettext)
+ choke me
+ #else
+-f = gettext;
++char (*f) () = gettext;
++#endif
++#ifdef __cplusplus
++}
+ #endif
+
++int
++main ()
++{
++return f != gettext;
+ ;
+ return 0;
+ }
+ _ACEOF
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+- (eval $ac_link) 2>&5
++ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest$ac_exeext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -5027,10 +5663,12 @@
+ ac_cv_func_gettext=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_func_gettext=no
+ fi
+-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_func_gettext" >&5
+ echo "${ECHO_T}$ac_cv_func_gettext" >&6
+@@ -5048,8 +5686,11 @@
+ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-lintl $LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+ /* Override any gcc2 internal prototype to avoid an error. */
+ #ifdef __cplusplus
+@@ -5058,12 +5699,6 @@
+ /* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+ char gettext ();
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -5074,11 +5709,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+- (eval $ac_link) 2>&5
++ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest$ac_exeext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -5087,10 +5731,12 @@
+ ac_cv_lib_intl_gettext=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_lib_intl_gettext=no
+ fi
+-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ LIBS=$ac_check_lib_save_LIBS
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_lib_intl_gettext" >&5
+@@ -5113,8 +5759,11 @@
+ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-lthreads $LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+ /* Override any gcc2 internal prototype to avoid an error. */
+ #ifdef __cplusplus
+@@ -5123,12 +5772,6 @@
+ /* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+ char cthread_fork ();
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -5139,11 +5782,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+- (eval $ac_link) 2>&5
++ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest$ac_exeext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -5152,10 +5804,12 @@
+ ac_cv_lib_threads_cthread_fork=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_lib_threads_cthread_fork=no
+ fi
+-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ LIBS=$ac_check_lib_save_LIBS
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_lib_threads_cthread_fork" >&5
+@@ -5183,19 +5837,16 @@
+ ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ #include <unistd.h>
+
+ template<class T> class foo { };
+
+
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -5210,11 +5861,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -5223,9 +5883,10 @@
+ ac_cv_size_t_is_uint=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_ext=c
+ ac_cpp='$CPP $CPPFLAGS'
+ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+@@ -5253,15 +5914,12 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -5272,11 +5930,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+- (eval $ac_link) 2>&5
++ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest$ac_exeext'
++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -5285,10 +5952,12 @@
+ ac_cv_typedef_bool=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_typedef_bool=no
+ fi
+-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_typedef_bool" >&5
+ echo "${ECHO_T}$ac_cv_typedef_bool" >&6
+@@ -5306,8 +5975,11 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+ class foo {
+ };
+@@ -5317,12 +5989,6 @@
+ T *data();};
+ template class test<foo>;
+
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -5333,11 +5999,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+- (eval $ac_link) 2>&5
++ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest$ac_exeext'
++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -5346,10 +6021,12 @@
+ ac_cv_c_template_ansi=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_c_template_ansi=no
+ fi
+-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_c_template_ansi" >&5
+ echo "${ECHO_T}$ac_cv_c_template_ansi" >&6
+@@ -5382,24 +6059,34 @@
+ do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
++ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
+-#include <assert.h>
+- Syntax error
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++ Syntax error
+ _ACEOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+- egrep -v '^ *\+' conftest.er1 >conftest.err
++ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_cxx_preproc_warn_flag
++ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+ else
+ ac_cpp_err=
+ fi
+@@ -5410,7 +6097,8 @@
+ :
+ else
+ echo "$as_me: failed program was:" >&5
+- cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ # Broken: fails on valid input.
+ continue
+ fi
+@@ -5419,20 +6107,24 @@
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ #include <ac_nonexistent.h>
+ _ACEOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+- egrep -v '^ *\+' conftest.er1 >conftest.err
++ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_cxx_preproc_warn_flag
++ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+ else
+ ac_cpp_err=
+ fi
+@@ -5444,7 +6136,8 @@
+ continue
+ else
+ echo "$as_me: failed program was:" >&5
+- cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ # Passes both tests.
+ ac_preproc_ok=:
+ break
+@@ -5473,24 +6166,34 @@
+ do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
++ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
+-#include <assert.h>
+- Syntax error
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++ Syntax error
+ _ACEOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+- egrep -v '^ *\+' conftest.er1 >conftest.err
++ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_cxx_preproc_warn_flag
++ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+ else
+ ac_cpp_err=
+ fi
+@@ -5501,7 +6204,8 @@
+ :
+ else
+ echo "$as_me: failed program was:" >&5
+- cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ # Broken: fails on valid input.
+ continue
+ fi
+@@ -5510,20 +6214,24 @@
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ #include <ac_nonexistent.h>
+ _ACEOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+- egrep -v '^ *\+' conftest.er1 >conftest.err
++ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_cxx_preproc_warn_flag
++ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+ else
+ ac_cpp_err=
+ fi
+@@ -5535,7 +6243,8 @@
+ continue
+ else
+ echo "$as_me: failed program was:" >&5
+- cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ # Passes both tests.
+ ac_preproc_ok=:
+ break
+@@ -5548,8 +6257,10 @@
+ if $ac_preproc_ok; then
+ :
+ else
+- { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check" >&5
+-echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check" >&2;}
++ { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
++See \`config.log' for more details." >&5
++echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
++See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+@@ -5579,16 +6290,13 @@
+ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-lnsl $LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -5599,11 +6307,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+- (eval $ac_link) 2>&5
++ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest$ac_exeext'
++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -5612,10 +6329,12 @@
+ ac_cv_lib_nsl_main=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_lib_nsl_main=no
+ fi
+-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ LIBS=$ac_check_lib_save_LIBS
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_main" >&5
+@@ -5632,16 +6351,13 @@
+ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-lsocket $LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -5652,11 +6368,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+- (eval $ac_link) 2>&5
++ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest$ac_exeext'
++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -5665,10 +6390,12 @@
+ ac_cv_lib_socket_main=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_lib_socket_main=no
+ fi
+-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ LIBS=$ac_check_lib_save_LIBS
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_lib_socket_main" >&5
+@@ -5680,13 +6407,16 @@
+ echo "$as_me:$LINENO: checking h_errno in netdb.h" >&5
+ echo $ECHO_N "checking h_errno in netdb.h... $ECHO_C" >&6
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ #include <netdb.h>
+
+ _ACEOF
+ if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+- egrep "h_errno" >/dev/null 2>&1; then
++ $EGREP "h_errno" >/dev/null 2>&1; then
+ echo "$as_me:$LINENO: result: yes" >&5
+ echo "${ECHO_T}yes" >&6
+ else
+@@ -6417,18 +7147,30 @@
+ echo "$as_me:$LINENO: checking $ac_header usability" >&5
+ echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ $ac_includes_default
+ #include <$ac_header>
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -6437,10 +7179,11 @@
+ ac_header_compiler=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_header_compiler=no
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+ echo "${ECHO_T}$ac_header_compiler" >&6
+
+@@ -6448,20 +7191,24 @@
+ echo "$as_me:$LINENO: checking $ac_header presence" >&5
+ echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+ #include <$ac_header>
+ _ACEOF
+ if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+- egrep -v '^ *\+' conftest.er1 >conftest.err
++ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_cxx_preproc_warn_flag
++ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+ else
+ ac_cpp_err=
+ fi
+@@ -6472,7 +7219,8 @@
+ ac_header_preproc=yes
+ else
+ echo "$as_me: failed program was:" >&5
+- cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_header_preproc=no
+ fi
+ rm -f conftest.err conftest.$ac_ext
+@@ -6480,26 +7228,43 @@
+ echo "${ECHO_T}$ac_header_preproc" >&6
+
+ # So? What about this header?
+-case $ac_header_compiler:$ac_header_preproc in
+- yes:no )
++case $ac_header_compiler:$ac_header_preproc:$ac_cxx_preproc_warn_flag in
++ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+ echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+- { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
+- no:yes )
++ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
++echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
++ ac_header_preproc=yes
++ ;;
++ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+ echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+- { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+-echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
++echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
++echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
++echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+-echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;};;
++echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
++ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
++echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
++ (
++ cat <<\_ASBOX
++## ------------------------------------------ ##
++## Report this to the AC_PACKAGE_NAME lists. ##
++## ------------------------------------------ ##
++_ASBOX
++ ) |
++ sed "s/^/$as_me: WARNING: /" >&2
++ ;;
+ esac
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+ echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+ if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+- eval "$as_ac_Header=$ac_header_preproc"
++ eval "$as_ac_Header=\$ac_header_preproc"
+ fi
+ echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+ echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+@@ -6833,7 +7598,7 @@
+ case $host in
+ *-*-irix6*)
+ # Find out which ABI we are using.
+- echo '#line 6836 "configure"' > conftest.$ac_ext
++ echo '#line 7601 "configure"' > conftest.$ac_ext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+@@ -6872,15 +7637,12 @@
+ ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -6891,11 +7653,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+- (eval $ac_link) 2>&5
++ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest$ac_exeext'
++ { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -6904,10 +7675,12 @@
+ lt_cv_cc_needs_belf=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ lt_cv_cc_needs_belf=no
+ fi
+-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ ac_ext=cc
+ ac_cpp='$CXXCPP $CPPFLAGS'
+ ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+@@ -7199,15 +7972,12 @@
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC"
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -7218,11 +7988,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -7246,11 +8025,12 @@
+
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ lt_cv_prog_cc_pic_works=no
+
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ CFLAGS="$save_CFLAGS"
+
+ fi
+@@ -7288,15 +8068,12 @@
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static"
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -7307,11 +8084,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+- (eval $ac_link) 2>&5
++ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest$ac_exeext'
++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -7320,9 +8106,11 @@
+ lt_cv_prog_cc_static_works=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ fi
+-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+
+ fi
+@@ -7362,7 +8150,7 @@
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"
+ compiler_c_o=no
+-if { (eval echo configure:7365: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
++if { (eval echo configure:8153: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s out/conftest.err; then
+@@ -7401,15 +8189,12 @@
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -c -o conftest.lo"
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -7420,11 +8205,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -7440,9 +8234,10 @@
+
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ CFLAGS="$save_CFLAGS"
+
+ fi
+@@ -7486,15 +8281,12 @@
+ CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext"
+ compiler_rtti_exceptions=no
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -7505,11 +8297,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+- (eval $ac_compile) 2>&5
++ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest.$ac_objext'
++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -7525,9 +8326,10 @@
+
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ fi
+-rm -f conftest.$ac_objext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ CFLAGS="$save_CFLAGS"
+ echo "$as_me:$LINENO: result: $compiler_rtti_exceptions" >&5
+ echo "${ECHO_T}$compiler_rtti_exceptions" >&6
+@@ -8637,8 +9439,11 @@
+ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-ldl $LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+ /* Override any gcc2 internal prototype to avoid an error. */
+ #ifdef __cplusplus
+@@ -8647,12 +9452,6 @@
+ /* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+ char dlopen ();
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -8663,11 +9462,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+- (eval $ac_link) 2>&5
++ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest$ac_exeext'
++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -8676,10 +9484,12 @@
+ ac_cv_lib_dl_dlopen=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_lib_dl_dlopen=no
+ fi
+-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ LIBS=$ac_check_lib_save_LIBS
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+@@ -8693,49 +9503,72 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
++ For example, HP-UX 11i <limits.h> declares gettimeofday. */
++#define dlopen innocuous_dlopen
++
+ /* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char dlopen (); below. */
+-#include <assert.h>
++ which can conflict with char dlopen (); below.
++ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ <limits.h> exists even on freestanding compilers. */
++
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++
++#undef dlopen
++
+ /* Override any gcc2 internal prototype to avoid an error. */
+ #ifdef __cplusplus
+ extern "C"
++{
+ #endif
+ /* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+ char dlopen ();
+-char (*f) ();
+-
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+-int
+-main ()
+-{
+ /* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+ #if defined (__stub_dlopen) || defined (__stub___dlopen)
+ choke me
+ #else
+-f = dlopen;
++char (*f) () = dlopen;
++#endif
++#ifdef __cplusplus
++}
+ #endif
+
++int
++main ()
++{
++return f != dlopen;
+ ;
+ return 0;
+ }
+ _ACEOF
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+- (eval $ac_link) 2>&5
++ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest$ac_exeext'
++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -8744,10 +9577,12 @@
+ ac_cv_func_dlopen=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_func_dlopen=no
+ fi
+-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
+ echo "${ECHO_T}$ac_cv_func_dlopen" >&6
+@@ -8760,49 +9595,72 @@
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+ else
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
++/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
++ For example, HP-UX 11i <limits.h> declares gettimeofday. */
++#define shl_load innocuous_shl_load
++
+ /* System header to define __stub macros and hopefully few prototypes,
+- which can conflict with char shl_load (); below. */
+-#include <assert.h>
++ which can conflict with char shl_load (); below.
++ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
++ <limits.h> exists even on freestanding compilers. */
++
++#ifdef __STDC__
++# include <limits.h>
++#else
++# include <assert.h>
++#endif
++
++#undef shl_load
++
+ /* Override any gcc2 internal prototype to avoid an error. */
+ #ifdef __cplusplus
+ extern "C"
++{
+ #endif
+ /* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+ char shl_load ();
+-char (*f) ();
+-
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+-int
+-main ()
+-{
+ /* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+ #if defined (__stub_shl_load) || defined (__stub___shl_load)
+ choke me
+ #else
+-f = shl_load;
++char (*f) () = shl_load;
++#endif
++#ifdef __cplusplus
++}
+ #endif
+
++int
++main ()
++{
++return f != shl_load;
+ ;
+ return 0;
+ }
+ _ACEOF
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+- (eval $ac_link) 2>&5
++ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest$ac_exeext'
++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -8811,10 +9669,12 @@
+ ac_cv_func_shl_load=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_func_shl_load=no
+ fi
+-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
+ echo "${ECHO_T}$ac_cv_func_shl_load" >&6
+@@ -8829,8 +9689,11 @@
+ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-lsvld $LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+ /* Override any gcc2 internal prototype to avoid an error. */
+ #ifdef __cplusplus
+@@ -8839,12 +9702,6 @@
+ /* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+ char dlopen ();
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -8855,11 +9712,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+- (eval $ac_link) 2>&5
++ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest$ac_exeext'
++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -8868,10 +9734,12 @@
+ ac_cv_lib_svld_dlopen=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_lib_svld_dlopen=no
+ fi
+-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ LIBS=$ac_check_lib_save_LIBS
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
+@@ -8887,8 +9755,11 @@
+ ac_check_lib_save_LIBS=$LIBS
+ LIBS="-ldld $LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
+-#line $LINENO "configure"
+-#include "confdefs.h"
++/* confdefs.h. */
++_ACEOF
++cat confdefs.h >>conftest.$ac_ext
++cat >>conftest.$ac_ext <<_ACEOF
++/* end confdefs.h. */
+
+ /* Override any gcc2 internal prototype to avoid an error. */
+ #ifdef __cplusplus
+@@ -8897,12 +9768,6 @@
+ /* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+ char shl_load ();
+-#ifdef F77_DUMMY_MAIN
+-# ifdef __cplusplus
+- extern "C"
+-# endif
+- int F77_DUMMY_MAIN() { return 1; }
+-#endif
+ int
+ main ()
+ {
+@@ -8913,11 +9778,20 @@
+ _ACEOF
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+- (eval $ac_link) 2>&5
++ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
++ grep -v '^ *+' conftest.er1 >conftest.err
++ rm -f conftest.er1
++ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+- { ac_try='test -s conftest$ac_exeext'
++ { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
++ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
++ (eval $ac_try) 2>&5
++ ac_status=$?
++ echo "$as_me:$LINENO: \$? = $ac_status" >&5
++ (exit $ac_status); }; } &&
++ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+@@ -8926,10 +9800,12 @@
+ ac_cv_lib_dld_shl_load=yes
+ else
+ echo "$as_me: failed program was:" >&5
+-cat conftest.$ac_ext >&5
++sed 's/^/| /' conftest.$ac_ext >&5
++
+ ac_cv_lib_dld_shl_load=no
+ fi
+-rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext
++rm -f conftest.err conftest.$ac_objext \
++ conftest$ac_exeext conftest.$ac_ext
+ LIBS=$ac_check_lib_save_LIBS
+ fi
+ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
+@@ -8981,7 +9857,7 @@
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<EOF
+-#line 8984 "configure"
++#line 9860 "configure"
+ #include "confdefs.h"
+
+ #if HAVE_DLFCN_H
+@@ -9079,7 +9955,7 @@
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<EOF
+-#line 9082 "configure"
++#line 9958 "configure"
+ #include "confdefs.h"
+
+ #if HAVE_DLFCN_H
+@@ -9803,7 +10679,7 @@
+
+
+
+-ac_config_files="$ac_config_files Makefile Makefile.lib Makefile.prog Makefile.comm include/config.h"
++ ac_config_files="$ac_config_files Makefile Makefile.lib Makefile.prog Makefile.comm include/config.h"
+ cat >confcache <<\_ACEOF
+ # This file is a shell script that caches the results of configure
+ # tests run on this system so they can be shared between configure
+@@ -9814,7 +10690,7 @@
+ # config.status only pays attention to the cache file if you give it
+ # the --recheck option to rerun configure.
+ #
+-# `ac_cv_env_foo' variables (set or unset) will be overriden when
++# `ac_cv_env_foo' variables (set or unset) will be overridden when
+ # loading this file, other *unset* `ac_cv_foo' will be assigned the
+ # following values.
+
+@@ -9832,13 +10708,13 @@
+ # `set' does not quote correctly, so add quotes (double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+- "s/'/'\\\\''/g;
+- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
++ "s/'/'\\\\''/g;
++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n \
+- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
++ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+ } |
+@@ -9849,7 +10725,7 @@
+ t end
+ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ : end' >>confcache
+-if cmp -s $cache_file confcache; then :; else
++if diff $cache_file confcache >/dev/null 2>&1; then :; else
+ if test -w $cache_file; then
+ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+ cat confcache >$cache_file
+@@ -9868,13 +10744,13 @@
+ # trailing colons and then remove the whole line if VPATH becomes empty
+ # (actually we leave an empty line to preserve line numbers).
+ if test "x$srcdir" = x.; then
+- ac_vpsub='/^[ ]*VPATH[ ]*=/{
++ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+ s/:*\$(srcdir):*/:/;
+ s/:*\${srcdir}:*/:/;
+ s/:*@srcdir@:*/:/;
+-s/^\([^=]*=[ ]*\):*/\1/;
++s/^\([^=]*=[ ]*\):*/\1/;
+ s/:*$//;
+-s/^[^=]*=[ ]*$//;
++s/^[^=]*=[ ]*$//;
+ }'
+ fi
+
+@@ -9888,13 +10764,13 @@
+ cat >confdef2opt.sed <<\_ACEOF
+ t clear
+ : clear
+-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
++s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
+ t quote
+-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
++s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
+ t quote
+ d
+ : quote
+-s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
++s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
+ s,\[,\\&,g
+ s,\],\\&,g
+ s,\$,$$,g
+@@ -9911,6 +10787,21 @@
+ rm -f confdef2opt.sed
+
+
++ac_libobjs=
++ac_ltlibobjs=
++for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
++ # 1. Remove the extension, and $U if already installed.
++ ac_i=`echo "$ac_i" |
++ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
++ # 2. Add them.
++ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
++ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
++done
++LIBOBJS=$ac_libobjs
++
++LTLIBOBJS=$ac_ltlibobjs
++
++
+
+ : ${CONFIG_STATUS=./config.status}
+ ac_clean_files_save=$ac_clean_files
+@@ -9925,11 +10816,12 @@
+ # configure, is in config.log if it exists.
+
+ debug=false
++ac_cs_recheck=false
++ac_cs_silent=false
+ SHELL=\${CONFIG_SHELL-$SHELL}
+ _ACEOF
+
+ cat >>$CONFIG_STATUS <<\_ACEOF
+-
+ ## --------------------- ##
+ ## M4sh Initialization. ##
+ ## --------------------- ##
+@@ -9938,46 +10830,57 @@
+ if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
++ # is contrary to our usage. Disable this feature.
++ alias -g '${1+"$@"}'='"$@"'
+ elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+ fi
++DUALCASE=1; export DUALCASE # for MKS sh
+
+-# NLS nuisances.
+ # Support unset when possible.
+-if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
++if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+ else
+ as_unset=false
+ fi
+
+-(set +x; test -n "`(LANG=C; export LANG) 2>&1`") &&
+- { $as_unset LANG || test "${LANG+set}" != set; } ||
+- { LANG=C; export LANG; }
+-(set +x; test -n "`(LC_ALL=C; export LC_ALL) 2>&1`") &&
+- { $as_unset LC_ALL || test "${LC_ALL+set}" != set; } ||
+- { LC_ALL=C; export LC_ALL; }
+-(set +x; test -n "`(LC_TIME=C; export LC_TIME) 2>&1`") &&
+- { $as_unset LC_TIME || test "${LC_TIME+set}" != set; } ||
+- { LC_TIME=C; export LC_TIME; }
+-(set +x; test -n "`(LC_CTYPE=C; export LC_CTYPE) 2>&1`") &&
+- { $as_unset LC_CTYPE || test "${LC_CTYPE+set}" != set; } ||
+- { LC_CTYPE=C; export LC_CTYPE; }
+-(set +x; test -n "`(LANGUAGE=C; export LANGUAGE) 2>&1`") &&
+- { $as_unset LANGUAGE || test "${LANGUAGE+set}" != set; } ||
+- { LANGUAGE=C; export LANGUAGE; }
+-(set +x; test -n "`(LC_COLLATE=C; export LC_COLLATE) 2>&1`") &&
+- { $as_unset LC_COLLATE || test "${LC_COLLATE+set}" != set; } ||
+- { LC_COLLATE=C; export LC_COLLATE; }
+-(set +x; test -n "`(LC_NUMERIC=C; export LC_NUMERIC) 2>&1`") &&
+- { $as_unset LC_NUMERIC || test "${LC_NUMERIC+set}" != set; } ||
+- { LC_NUMERIC=C; export LC_NUMERIC; }
+-(set +x; test -n "`(LC_MESSAGES=C; export LC_MESSAGES) 2>&1`") &&
+- { $as_unset LC_MESSAGES || test "${LC_MESSAGES+set}" != set; } ||
+- { LC_MESSAGES=C; export LC_MESSAGES; }
++
++# Work around bugs in pre-3.0 UWIN ksh.
++$as_unset ENV MAIL MAILPATH
++PS1='$ '
++PS2='> '
++PS4='+ '
++
++# NLS nuisances.
++for as_var in \
++ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
++ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
++ LC_TELEPHONE LC_TIME
++do
++ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
++ eval $as_var=C; export $as_var
++ else
++ $as_unset $as_var
++ fi
++done
++
++# Required to use basename.
++if expr a : '\(a\)' >/dev/null 2>&1; then
++ as_expr=expr
++else
++ as_expr=false
++fi
++
++if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
++ as_basename=basename
++else
++ as_basename=false
++fi
+
+
+ # Name of the executable.
+-as_me=`(basename "$0") 2>/dev/null ||
++as_me=`$as_basename "$0" ||
+ $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+@@ -9988,6 +10891,7 @@
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
++
+ # PATH needs CR, and LINENO needs CR and PATH.
+ # Avoid depending upon Character Ranges.
+ as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+@@ -9998,15 +10902,15 @@
+
+ # The user is always right.
+ if test "${PATH_SEPARATOR+set}" != set; then
+- echo "#! /bin/sh" >conftest.sh
+- echo "exit 0" >>conftest.sh
+- chmod +x conftest.sh
+- if (PATH=".;."; conftest.sh) >/dev/null 2>&1; then
++ echo "#! /bin/sh" >conf$$.sh
++ echo "exit 0" >>conf$$.sh
++ chmod +x conf$$.sh
++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+- rm -f conftest.sh
++ rm -f conf$$.sh
+ fi
+
+
+@@ -10055,6 +10959,8 @@
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
++ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
++ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+@@ -10128,13 +11034,20 @@
+ fi
+ rm -f conf$$ conf$$.exe conf$$.file
+
++if mkdir -p . 2>/dev/null; then
++ as_mkdir_p=:
++else
++ test -d ./-p && rmdir ./-p
++ as_mkdir_p=false
++fi
++
+ as_executable_p="test -f"
+
+ # Sed expression to map a string onto a valid CPP name.
+-as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
++as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+ # Sed expression to map a string onto a valid variable name.
+-as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
++as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+ # IFS
+@@ -10144,7 +11057,7 @@
+ IFS=" $as_nl"
+
+ # CDPATH.
+-$as_unset CDPATH || test "${CDPATH+set}" != set || { CDPATH=$PATH_SEPARATOR; export CDPATH; }
++$as_unset CDPATH
+
+ exec 6>&1
+
+@@ -10161,7 +11074,7 @@
+ cat >&5 <<_CSEOF
+
+ This file was extended by $as_me, which was
+-generated by GNU Autoconf 2.53. Invocation command line was
++generated by GNU Autoconf 2.59. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+@@ -10201,10 +11114,11 @@
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
++ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+- instantiate the configuration file FILE
++ instantiate the configuration file FILE
+
+ Configuration files:
+ $config_files
+@@ -10215,11 +11129,10 @@
+ cat >>$CONFIG_STATUS <<_ACEOF
+ ac_cs_version="\\
+ config.status
+-configured by $0, generated by GNU Autoconf 2.53,
++configured by $0, generated by GNU Autoconf 2.59,
+ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+
+-Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
+-Free Software Foundation, Inc.
++Copyright (C) 2003 Free Software Foundation, Inc.
+ This config.status script is free software; the Free Software Foundation
+ gives unlimited permission to copy, distribute and modify it."
+ srcdir=$srcdir
+@@ -10236,25 +11149,25 @@
+ --*=*)
+ ac_option=`expr "x$1" : 'x\([^=]*\)='`
+ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+- shift
+- set dummy "$ac_option" "$ac_optarg" ${1+"$@"}
+- shift
++ ac_shift=:
++ ;;
++ -*)
++ ac_option=$1
++ ac_optarg=$2
++ ac_shift=shift
+ ;;
+- -*);;
+ *) # This is not an option, so the user has probably given explicit
+ # arguments.
++ ac_option=$1
+ ac_need_defaults=false;;
+ esac
+
+- case $1 in
++ case $ac_option in
+ # Handling of the options.
+ _ACEOF
+-cat >>$CONFIG_STATUS <<_ACEOF
+- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+- echo "running $SHELL $0 " $ac_configure_args " --no-create --no-recursion"
+- exec $SHELL $0 $ac_configure_args --no-create --no-recursion ;;
+-_ACEOF
+ cat >>$CONFIG_STATUS <<\_ACEOF
++ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
++ ac_cs_recheck=: ;;
+ --version | --vers* | -V )
+ echo "$ac_cs_version"; exit 0 ;;
+ --he | --h)
+@@ -10269,13 +11182,16 @@
+ --debug | --d* | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+- shift
+- CONFIG_FILES="$CONFIG_FILES $1"
++ $ac_shift
++ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+- shift
+- CONFIG_HEADERS="$CONFIG_HEADERS $1"
++ $ac_shift
++ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+ ac_need_defaults=false;;
++ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
++ | -silent | --silent | --silen | --sile | --sil | --si | --s)
++ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+@@ -10290,6 +11206,20 @@
+ shift
+ done
+
++ac_configure_extra_args=
++
++if $ac_cs_silent; then
++ exec 6>/dev/null
++ ac_configure_extra_args="$ac_configure_extra_args --silent"
++fi
++
++_ACEOF
++cat >>$CONFIG_STATUS <<_ACEOF
++if \$ac_cs_recheck; then
++ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
++ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
++fi
++
+ _ACEOF
+
+
+@@ -10320,6 +11250,9 @@
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ fi
+
++# Have a temporary directory for convenience. Make it in the build tree
++# simply because there is no reason to put it here, and in addition,
++# creating and moving files from /tmp can sometimes cause problems.
+ # Create a temporary directory, and hook for its removal unless debugging.
+ $debug ||
+ {
+@@ -10328,17 +11261,17 @@
+ }
+
+ # Create a (secure) tmp directory for tmp files.
+-: ${TMPDIR=/tmp}
++
+ {
+- tmp=`(umask 077 && mktemp -d -q "$TMPDIR/csXXXXXX") 2>/dev/null` &&
++ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+ } ||
+ {
+- tmp=$TMPDIR/cs$$-$RANDOM
++ tmp=./confstat$$-$RANDOM
+ (umask 077 && mkdir $tmp)
+ } ||
+ {
+- echo "$me: cannot create a temporary directory in $TMPDIR" >&2
++ echo "$me: cannot create a temporary directory in ." >&2
+ { (exit 1); exit 1; }
+ }
+
+@@ -10420,7 +11353,9 @@
+ s,@CXXFLAGS@,$CXXFLAGS,;t t
+ s,@ac_ct_CXX@,$ac_ct_CXX,;t t
+ s,@PERL@,$PERL,;t t
++s,@SED@,$SED,;t t
+ s,@CPP@,$CPP,;t t
++s,@EGREP@,$EGREP,;t t
+ s,@LIB_THREADS@,$LIB_THREADS,;t t
+ s,@CXXCPP@,$CXXCPP,;t t
+ s,@ECHO@,$ECHO,;t t
+@@ -10431,6 +11366,8 @@
+ s,@LIBTOOL@,$LIBTOOL,;t t
+ s,@LIBTOOL_DEPS@,$LIBTOOL_DEPS,;t t
+ s,@LINKFLAGS@,$LINKFLAGS,;t t
++s,@LIBOBJS@,$LIBOBJS,;t t
++s,@LTLIBOBJS@,$LTLIBOBJS,;t t
+ CEOF
+
+ _ACEOF
+@@ -10460,9 +11397,9 @@
+ (echo ':t
+ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
+ if test -z "$ac_sed_cmds"; then
+- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
++ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+ else
+- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
++ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+ fi
+ ac_sed_frag=`expr $ac_sed_frag + 1`
+ ac_beg=$ac_end
+@@ -10480,46 +11417,51 @@
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case $ac_file in
+ - | *:- | *:-:* ) # input from stdin
+- cat >$tmp/stdin
+- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
++ cat >$tmp/stdin
++ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
++ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
++ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ * ) ac_file_in=$ac_file.in ;;
+ esac
+
+ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+ $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+- X"$ac_file" : 'X\(//\)[^/]' \| \
+- X"$ac_file" : 'X\(//\)$' \| \
+- X"$ac_file" : 'X\(/\)' \| \
+- . : '\(.\)' 2>/dev/null ||
++ X"$ac_file" : 'X\(//\)[^/]' \| \
++ X"$ac_file" : 'X\(//\)$' \| \
++ X"$ac_file" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
+ echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+- { case "$ac_dir" in
+- [\\/]* | ?:[\\/]* ) as_incr_dir=;;
+- *) as_incr_dir=.;;
+-esac
+-as_dummy="$ac_dir"
+-for as_mkdir_dir in `IFS='/\\'; set X $as_dummy; shift; echo "$@"`; do
+- case $as_mkdir_dir in
+- # Skip DOS drivespec
+- ?:) as_incr_dir=$as_mkdir_dir ;;
+- *)
+- as_incr_dir=$as_incr_dir/$as_mkdir_dir
+- test -d "$as_incr_dir" ||
+- mkdir "$as_incr_dir" ||
+- { { echo "$as_me:$LINENO: error: cannot create \"$ac_dir\"" >&5
+-echo "$as_me: error: cannot create \"$ac_dir\"" >&2;}
+- { (exit 1); exit 1; }; }
+- ;;
+- esac
+-done; }
++ { if $as_mkdir_p; then
++ mkdir -p "$ac_dir"
++ else
++ as_dir="$ac_dir"
++ as_dirs=
++ while test ! -d "$as_dir"; do
++ as_dirs="$as_dir $as_dirs"
++ as_dir=`(dirname "$as_dir") 2>/dev/null ||
++$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
++ X"$as_dir" : 'X\(//\)[^/]' \| \
++ X"$as_dir" : 'X\(//\)$' \| \
++ X"$as_dir" : 'X\(/\)' \| \
++ . : '\(.\)' 2>/dev/null ||
++echo X"$as_dir" |
++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
++ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
++ /^X\(\/\/\)$/{ s//\1/; q; }
++ /^X\(\/\).*/{ s//\1/; q; }
++ s/.*/./; q'`
++ done
++ test ! -n "$as_dirs" || mkdir $as_dirs
++ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
++echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
++ { (exit 1); exit 1; }; }; }
+
+ ac_builddir=.
+
+@@ -10546,12 +11488,45 @@
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+ esac
+-# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
+-# absolute.
+-ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
+-ac_abs_top_builddir=`cd "$ac_dir" && cd $ac_top_builddir && pwd`
+-ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
+-ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
++
++# Do not use `cd foo && pwd` to compute absolute paths, because
++# the directories may not exist.
++case `pwd` in
++.) ac_abs_builddir="$ac_dir";;
++*)
++ case "$ac_dir" in
++ .) ac_abs_builddir=`pwd`;;
++ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
++ *) ac_abs_builddir=`pwd`/"$ac_dir";;
++ esac;;
++esac
++case $ac_abs_builddir in
++.) ac_abs_top_builddir=${ac_top_builddir}.;;
++*)
++ case ${ac_top_builddir}. in
++ .) ac_abs_top_builddir=$ac_abs_builddir;;
++ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
++ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
++ esac;;
++esac
++case $ac_abs_builddir in
++.) ac_abs_srcdir=$ac_srcdir;;
++*)
++ case $ac_srcdir in
++ .) ac_abs_srcdir=$ac_abs_builddir;;
++ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
++ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
++ esac;;
++esac
++case $ac_abs_builddir in
++.) ac_abs_top_srcdir=$ac_top_srcdir;;
++*)
++ case $ac_top_srcdir in
++ .) ac_abs_top_srcdir=$ac_abs_builddir;;
++ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
++ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
++ esac;;
++esac
+
+
+ case $INSTALL in
+@@ -10559,11 +11534,6 @@
+ *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+ esac
+
+- if test x"$ac_file" != x-; then
+- { echo "$as_me:$LINENO: creating $ac_file" >&5
+-echo "$as_me: creating $ac_file" >&6;}
+- rm -f "$ac_file"
+- fi
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+@@ -10573,7 +11543,7 @@
+ configure_input="$ac_file. "
+ fi
+ configure_input=$configure_input"Generated from `echo $ac_file_in |
+- sed 's,.*/,,'` by configure."
++ sed 's,.*/,,'` by configure."
+
+ # First look for the input files in the build tree, otherwise in the
+ # src tree.
+@@ -10582,26 +11552,32 @@
+ case $f in
+ -) echo $tmp/stdin ;;
+ [\\/$]*)
+- # Absolute (can't be DOS-style, as IFS=:)
+- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
++ # Absolute (can't be DOS-style, as IFS=:)
++ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+ echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+- echo $f;;
++ echo "$f";;
+ *) # Relative
+- if test -f "$f"; then
+- # Build tree
+- echo $f
+- elif test -f "$srcdir/$f"; then
+- # Source tree
+- echo $srcdir/$f
+- else
+- # /dev/null tree
+- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
++ if test -f "$f"; then
++ # Build tree
++ echo "$f"
++ elif test -f "$srcdir/$f"; then
++ # Source tree
++ echo "$srcdir/$f"
++ else
++ # /dev/null tree
++ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+ echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+- fi;;
++ fi;;
+ esac
+ done` || { (exit 1); exit 1; }
++
++ if test x"$ac_file" != x-; then
++ { echo "$as_me:$LINENO: creating $ac_file" >&5
++echo "$as_me: creating $ac_file" >&6;}
++ rm -f "$ac_file"
++ fi
+ _ACEOF
+ cat >>$CONFIG_STATUS <<_ACEOF
+ sed "$ac_vpsub
+@@ -10650,8 +11626,11 @@
+ # need to make the FD available again.
+ if test "$no_create" != yes; then
+ ac_cs_success=:
++ ac_config_status_args=
++ test "$silent" = yes &&
++ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+- $SHELL $CONFIG_STATUS || ac_cs_success=false
++ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+--- openjade1.3-1.3.2.orig/config.guess
++++ openjade1.3-1.3.2/config.guess
+@@ -0,0 +1,1530 @@
++#! /bin/sh
++# Attempt to guess a canonical system name.
++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
++# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
++# 2011, 2012 Free Software Foundation, Inc.
++
++timestamp='2012-02-10'
++
++# This file is free software; you can redistribute it and/or modify it
++# under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful, but
++# WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++# General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, see <http://www.gnu.org/licenses/>.
++#
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++
++# Originally written by Per Bothner. Please send patches (context
++# diff format) to <config-patches@gnu.org> and include a ChangeLog
++# entry.
++#
++# This script attempts to guess a canonical system name similar to
++# config.sub. If it succeeds, it prints the system name on stdout, and
++# exits with 0. Otherwise, it exits with 1.
++#
++# You can get the latest version of this script from:
++# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
++
++me=`echo "$0" | sed -e 's,.*/,,'`
++
++usage="\
++Usage: $0 [OPTION]
++
++Output the configuration name of the system \`$me' is run on.
++
++Operation modes:
++ -h, --help print this help, then exit
++ -t, --time-stamp print date of last modification, then exit
++ -v, --version print version number, then exit
++
++Report bugs and patches to <config-patches@gnu.org>."
++
++version="\
++GNU config.guess ($timestamp)
++
++Originally written by Per Bothner.
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
++2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
++Free Software Foundation, Inc.
++
++This is free software; see the source for copying conditions. There is NO
++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
++
++help="
++Try \`$me --help' for more information."
++
++# Parse command line
++while test $# -gt 0 ; do
++ case $1 in
++ --time-stamp | --time* | -t )
++ echo "$timestamp" ; exit ;;
++ --version | -v )
++ echo "$version" ; exit ;;
++ --help | --h* | -h )
++ echo "$usage"; exit ;;
++ -- ) # Stop option processing
++ shift; break ;;
++ - ) # Use stdin as input.
++ break ;;
++ -* )
++ echo "$me: invalid option $1$help" >&2
++ exit 1 ;;
++ * )
++ break ;;
++ esac
++done
++
++if test $# != 0; then
++ echo "$me: too many arguments$help" >&2
++ exit 1
++fi
++
++trap 'exit 1' 1 2 15
++
++# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
++# compiler to aid in system detection is discouraged as it requires
++# temporary files to be created and, as you can see below, it is a
++# headache to deal with in a portable fashion.
++
++# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
++# use `HOST_CC' if defined, but it is deprecated.
++
++# Portable tmp directory creation inspired by the Autoconf team.
++
++set_cc_for_build='
++trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
++trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
++: ${TMPDIR=/tmp} ;
++ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
++ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
++ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
++ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
++dummy=$tmp/dummy ;
++tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
++case $CC_FOR_BUILD,$HOST_CC,$CC in
++ ,,) echo "int x;" > $dummy.c ;
++ for c in cc gcc c89 c99 ; do
++ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
++ CC_FOR_BUILD="$c"; break ;
++ fi ;
++ done ;
++ if test x"$CC_FOR_BUILD" = x ; then
++ CC_FOR_BUILD=no_compiler_found ;
++ fi
++ ;;
++ ,,*) CC_FOR_BUILD=$CC ;;
++ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
++esac ; set_cc_for_build= ;'
++
++# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
++# (ghazi@noc.rutgers.edu 1994-08-24)
++if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
++ PATH=$PATH:/.attbin ; export PATH
++fi
++
++UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
++UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
++UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
++UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
++
++# Note: order is significant - the case branches are not exclusive.
++
++case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
++ *:NetBSD:*:*)
++ # NetBSD (nbsd) targets should (where applicable) match one or
++ # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
++ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
++ # switched to ELF, *-*-netbsd* would select the old
++ # object file format. This provides both forward
++ # compatibility and a consistent mechanism for selecting the
++ # object file format.
++ #
++ # Note: NetBSD doesn't particularly care about the vendor
++ # portion of the name. We always set it to "unknown".
++ sysctl="sysctl -n hw.machine_arch"
++ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
++ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
++ case "${UNAME_MACHINE_ARCH}" in
++ armeb) machine=armeb-unknown ;;
++ arm*) machine=arm-unknown ;;
++ sh3el) machine=shl-unknown ;;
++ sh3eb) machine=sh-unknown ;;
++ sh5el) machine=sh5le-unknown ;;
++ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
++ esac
++ # The Operating System including object format, if it has switched
++ # to ELF recently, or will in the future.
++ case "${UNAME_MACHINE_ARCH}" in
++ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
++ eval $set_cc_for_build
++ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
++ | grep -q __ELF__
++ then
++ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
++ # Return netbsd for either. FIX?
++ os=netbsd
++ else
++ os=netbsdelf
++ fi
++ ;;
++ *)
++ os=netbsd
++ ;;
++ esac
++ # The OS release
++ # Debian GNU/NetBSD machines have a different userland, and
++ # thus, need a distinct triplet. However, they do not need
++ # kernel version information, so it can be replaced with a
++ # suitable tag, in the style of linux-gnu.
++ case "${UNAME_VERSION}" in
++ Debian*)
++ release='-gnu'
++ ;;
++ *)
++ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
++ ;;
++ esac
++ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
++ # contains redundant information, the shorter form:
++ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
++ echo "${machine}-${os}${release}"
++ exit ;;
++ *:OpenBSD:*:*)
++ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
++ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
++ exit ;;
++ *:ekkoBSD:*:*)
++ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
++ exit ;;
++ *:SolidBSD:*:*)
++ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
++ exit ;;
++ macppc:MirBSD:*:*)
++ echo powerpc-unknown-mirbsd${UNAME_RELEASE}
++ exit ;;
++ *:MirBSD:*:*)
++ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
++ exit ;;
++ alpha:OSF1:*:*)
++ case $UNAME_RELEASE in
++ *4.0)
++ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
++ ;;
++ *5.*)
++ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
++ ;;
++ esac
++ # According to Compaq, /usr/sbin/psrinfo has been available on
++ # OSF/1 and Tru64 systems produced since 1995. I hope that
++ # covers most systems running today. This code pipes the CPU
++ # types through head -n 1, so we only detect the type of CPU 0.
++ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
++ case "$ALPHA_CPU_TYPE" in
++ "EV4 (21064)")
++ UNAME_MACHINE="alpha" ;;
++ "EV4.5 (21064)")
++ UNAME_MACHINE="alpha" ;;
++ "LCA4 (21066/21068)")
++ UNAME_MACHINE="alpha" ;;
++ "EV5 (21164)")
++ UNAME_MACHINE="alphaev5" ;;
++ "EV5.6 (21164A)")
++ UNAME_MACHINE="alphaev56" ;;
++ "EV5.6 (21164PC)")
++ UNAME_MACHINE="alphapca56" ;;
++ "EV5.7 (21164PC)")
++ UNAME_MACHINE="alphapca57" ;;
++ "EV6 (21264)")
++ UNAME_MACHINE="alphaev6" ;;
++ "EV6.7 (21264A)")
++ UNAME_MACHINE="alphaev67" ;;
++ "EV6.8CB (21264C)")
++ UNAME_MACHINE="alphaev68" ;;
++ "EV6.8AL (21264B)")
++ UNAME_MACHINE="alphaev68" ;;
++ "EV6.8CX (21264D)")
++ UNAME_MACHINE="alphaev68" ;;
++ "EV6.9A (21264/EV69A)")
++ UNAME_MACHINE="alphaev69" ;;
++ "EV7 (21364)")
++ UNAME_MACHINE="alphaev7" ;;
++ "EV7.9 (21364A)")
++ UNAME_MACHINE="alphaev79" ;;
++ esac
++ # A Pn.n version is a patched version.
++ # A Vn.n version is a released version.
++ # A Tn.n version is a released field test version.
++ # A Xn.n version is an unreleased experimental baselevel.
++ # 1.2 uses "1.2" for uname -r.
++ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
++ # Reset EXIT trap before exiting to avoid spurious non-zero exit code.
++ exitcode=$?
++ trap '' 0
++ exit $exitcode ;;
++ Alpha\ *:Windows_NT*:*)
++ # How do we know it's Interix rather than the generic POSIX subsystem?
++ # Should we change UNAME_MACHINE based on the output of uname instead
++ # of the specific Alpha model?
++ echo alpha-pc-interix
++ exit ;;
++ 21064:Windows_NT:50:3)
++ echo alpha-dec-winnt3.5
++ exit ;;
++ Amiga*:UNIX_System_V:4.0:*)
++ echo m68k-unknown-sysv4
++ exit ;;
++ *:[Aa]miga[Oo][Ss]:*:*)
++ echo ${UNAME_MACHINE}-unknown-amigaos
++ exit ;;
++ *:[Mm]orph[Oo][Ss]:*:*)
++ echo ${UNAME_MACHINE}-unknown-morphos
++ exit ;;
++ *:OS/390:*:*)
++ echo i370-ibm-openedition
++ exit ;;
++ *:z/VM:*:*)
++ echo s390-ibm-zvmoe
++ exit ;;
++ *:OS400:*:*)
++ echo powerpc-ibm-os400
++ exit ;;
++ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
++ echo arm-acorn-riscix${UNAME_RELEASE}
++ exit ;;
++ arm:riscos:*:*|arm:RISCOS:*:*)
++ echo arm-unknown-riscos
++ exit ;;
++ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
++ echo hppa1.1-hitachi-hiuxmpp
++ exit ;;
++ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
++ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
++ if test "`(/bin/universe) 2>/dev/null`" = att ; then
++ echo pyramid-pyramid-sysv3
++ else
++ echo pyramid-pyramid-bsd
++ fi
++ exit ;;
++ NILE*:*:*:dcosx)
++ echo pyramid-pyramid-svr4
++ exit ;;
++ DRS?6000:unix:4.0:6*)
++ echo sparc-icl-nx6
++ exit ;;
++ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
++ case `/usr/bin/uname -p` in
++ sparc) echo sparc-icl-nx7; exit ;;
++ esac ;;
++ s390x:SunOS:*:*)
++ echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++ exit ;;
++ sun4H:SunOS:5.*:*)
++ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++ exit ;;
++ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
++ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++ exit ;;
++ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
++ echo i386-pc-auroraux${UNAME_RELEASE}
++ exit ;;
++ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
++ eval $set_cc_for_build
++ SUN_ARCH="i386"
++ # If there is a compiler, see if it is configured for 64-bit objects.
++ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
++ # This test works for both compilers.
++ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
++ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
++ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
++ grep IS_64BIT_ARCH >/dev/null
++ then
++ SUN_ARCH="x86_64"
++ fi
++ fi
++ echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++ exit ;;
++ sun4*:SunOS:6*:*)
++ # According to config.sub, this is the proper way to canonicalize
++ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
++ # it's likely to be more like Solaris than SunOS4.
++ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++ exit ;;
++ sun4*:SunOS:*:*)
++ case "`/usr/bin/arch -k`" in
++ Series*|S4*)
++ UNAME_RELEASE=`uname -v`
++ ;;
++ esac
++ # Japanese Language versions have a version number like `4.1.3-JL'.
++ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
++ exit ;;
++ sun3*:SunOS:*:*)
++ echo m68k-sun-sunos${UNAME_RELEASE}
++ exit ;;
++ sun*:*:4.2BSD:*)
++ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
++ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
++ case "`/bin/arch`" in
++ sun3)
++ echo m68k-sun-sunos${UNAME_RELEASE}
++ ;;
++ sun4)
++ echo sparc-sun-sunos${UNAME_RELEASE}
++ ;;
++ esac
++ exit ;;
++ aushp:SunOS:*:*)
++ echo sparc-auspex-sunos${UNAME_RELEASE}
++ exit ;;
++ # The situation for MiNT is a little confusing. The machine name
++ # can be virtually everything (everything which is not
++ # "atarist" or "atariste" at least should have a processor
++ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
++ # to the lowercase version "mint" (or "freemint"). Finally
++ # the system name "TOS" denotes a system which is actually not
++ # MiNT. But MiNT is downward compatible to TOS, so this should
++ # be no problem.
++ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
++ echo m68k-atari-mint${UNAME_RELEASE}
++ exit ;;
++ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
++ echo m68k-atari-mint${UNAME_RELEASE}
++ exit ;;
++ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
++ echo m68k-atari-mint${UNAME_RELEASE}
++ exit ;;
++ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
++ echo m68k-milan-mint${UNAME_RELEASE}
++ exit ;;
++ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
++ echo m68k-hades-mint${UNAME_RELEASE}
++ exit ;;
++ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
++ echo m68k-unknown-mint${UNAME_RELEASE}
++ exit ;;
++ m68k:machten:*:*)
++ echo m68k-apple-machten${UNAME_RELEASE}
++ exit ;;
++ powerpc:machten:*:*)
++ echo powerpc-apple-machten${UNAME_RELEASE}
++ exit ;;
++ RISC*:Mach:*:*)
++ echo mips-dec-mach_bsd4.3
++ exit ;;
++ RISC*:ULTRIX:*:*)
++ echo mips-dec-ultrix${UNAME_RELEASE}
++ exit ;;
++ VAX*:ULTRIX*:*:*)
++ echo vax-dec-ultrix${UNAME_RELEASE}
++ exit ;;
++ 2020:CLIX:*:* | 2430:CLIX:*:*)
++ echo clipper-intergraph-clix${UNAME_RELEASE}
++ exit ;;
++ mips:*:*:UMIPS | mips:*:*:RISCos)
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++#ifdef __cplusplus
++#include <stdio.h> /* for printf() prototype */
++ int main (int argc, char *argv[]) {
++#else
++ int main (argc, argv) int argc; char *argv[]; {
++#endif
++ #if defined (host_mips) && defined (MIPSEB)
++ #if defined (SYSTYPE_SYSV)
++ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
++ #endif
++ #if defined (SYSTYPE_SVR4)
++ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
++ #endif
++ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
++ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
++ #endif
++ #endif
++ exit (-1);
++ }
++EOF
++ $CC_FOR_BUILD -o $dummy $dummy.c &&
++ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
++ SYSTEM_NAME=`$dummy $dummyarg` &&
++ { echo "$SYSTEM_NAME"; exit; }
++ echo mips-mips-riscos${UNAME_RELEASE}
++ exit ;;
++ Motorola:PowerMAX_OS:*:*)
++ echo powerpc-motorola-powermax
++ exit ;;
++ Motorola:*:4.3:PL8-*)
++ echo powerpc-harris-powermax
++ exit ;;
++ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
++ echo powerpc-harris-powermax
++ exit ;;
++ Night_Hawk:Power_UNIX:*:*)
++ echo powerpc-harris-powerunix
++ exit ;;
++ m88k:CX/UX:7*:*)
++ echo m88k-harris-cxux7
++ exit ;;
++ m88k:*:4*:R4*)
++ echo m88k-motorola-sysv4
++ exit ;;
++ m88k:*:3*:R3*)
++ echo m88k-motorola-sysv3
++ exit ;;
++ AViiON:dgux:*:*)
++ # DG/UX returns AViiON for all architectures
++ UNAME_PROCESSOR=`/usr/bin/uname -p`
++ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
++ then
++ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
++ [ ${TARGET_BINARY_INTERFACE}x = x ]
++ then
++ echo m88k-dg-dgux${UNAME_RELEASE}
++ else
++ echo m88k-dg-dguxbcs${UNAME_RELEASE}
++ fi
++ else
++ echo i586-dg-dgux${UNAME_RELEASE}
++ fi
++ exit ;;
++ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
++ echo m88k-dolphin-sysv3
++ exit ;;
++ M88*:*:R3*:*)
++ # Delta 88k system running SVR3
++ echo m88k-motorola-sysv3
++ exit ;;
++ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
++ echo m88k-tektronix-sysv3
++ exit ;;
++ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
++ echo m68k-tektronix-bsd
++ exit ;;
++ *:IRIX*:*:*)
++ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
++ exit ;;
++ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
++ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
++ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
++ i*86:AIX:*:*)
++ echo i386-ibm-aix
++ exit ;;
++ ia64:AIX:*:*)
++ if [ -x /usr/bin/oslevel ] ; then
++ IBM_REV=`/usr/bin/oslevel`
++ else
++ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
++ fi
++ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
++ exit ;;
++ *:AIX:2:3)
++ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++ #include <sys/systemcfg.h>
++
++ main()
++ {
++ if (!__power_pc())
++ exit(1);
++ puts("powerpc-ibm-aix3.2.5");
++ exit(0);
++ }
++EOF
++ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
++ then
++ echo "$SYSTEM_NAME"
++ else
++ echo rs6000-ibm-aix3.2.5
++ fi
++ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
++ echo rs6000-ibm-aix3.2.4
++ else
++ echo rs6000-ibm-aix3.2
++ fi
++ exit ;;
++ *:AIX:*:[4567])
++ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
++ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
++ IBM_ARCH=rs6000
++ else
++ IBM_ARCH=powerpc
++ fi
++ if [ -x /usr/bin/oslevel ] ; then
++ IBM_REV=`/usr/bin/oslevel`
++ else
++ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
++ fi
++ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
++ exit ;;
++ *:AIX:*:*)
++ echo rs6000-ibm-aix
++ exit ;;
++ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
++ echo romp-ibm-bsd4.4
++ exit ;;
++ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
++ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
++ exit ;; # report: romp-ibm BSD 4.3
++ *:BOSX:*:*)
++ echo rs6000-bull-bosx
++ exit ;;
++ DPX/2?00:B.O.S.:*:*)
++ echo m68k-bull-sysv3
++ exit ;;
++ 9000/[34]??:4.3bsd:1.*:*)
++ echo m68k-hp-bsd
++ exit ;;
++ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
++ echo m68k-hp-bsd4.4
++ exit ;;
++ 9000/[34678]??:HP-UX:*:*)
++ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
++ case "${UNAME_MACHINE}" in
++ 9000/31? ) HP_ARCH=m68000 ;;
++ 9000/[34]?? ) HP_ARCH=m68k ;;
++ 9000/[678][0-9][0-9])
++ if [ -x /usr/bin/getconf ]; then
++ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
++ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
++ case "${sc_cpu_version}" in
++ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
++ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
++ 532) # CPU_PA_RISC2_0
++ case "${sc_kernel_bits}" in
++ 32) HP_ARCH="hppa2.0n" ;;
++ 64) HP_ARCH="hppa2.0w" ;;
++ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
++ esac ;;
++ esac
++ fi
++ if [ "${HP_ARCH}" = "" ]; then
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++
++ #define _HPUX_SOURCE
++ #include <stdlib.h>
++ #include <unistd.h>
++
++ int main ()
++ {
++ #if defined(_SC_KERNEL_BITS)
++ long bits = sysconf(_SC_KERNEL_BITS);
++ #endif
++ long cpu = sysconf (_SC_CPU_VERSION);
++
++ switch (cpu)
++ {
++ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
++ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
++ case CPU_PA_RISC2_0:
++ #if defined(_SC_KERNEL_BITS)
++ switch (bits)
++ {
++ case 64: puts ("hppa2.0w"); break;
++ case 32: puts ("hppa2.0n"); break;
++ default: puts ("hppa2.0"); break;
++ } break;
++ #else /* !defined(_SC_KERNEL_BITS) */
++ puts ("hppa2.0"); break;
++ #endif
++ default: puts ("hppa1.0"); break;
++ }
++ exit (0);
++ }
++EOF
++ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
++ test -z "$HP_ARCH" && HP_ARCH=hppa
++ fi ;;
++ esac
++ if [ ${HP_ARCH} = "hppa2.0w" ]
++ then
++ eval $set_cc_for_build
++
++ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
++ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
++ # generating 64-bit code. GNU and HP use different nomenclature:
++ #
++ # $ CC_FOR_BUILD=cc ./config.guess
++ # => hppa2.0w-hp-hpux11.23
++ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
++ # => hppa64-hp-hpux11.23
++
++ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
++ grep -q __LP64__
++ then
++ HP_ARCH="hppa2.0w"
++ else
++ HP_ARCH="hppa64"
++ fi
++ fi
++ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
++ exit ;;
++ ia64:HP-UX:*:*)
++ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
++ echo ia64-hp-hpux${HPUX_REV}
++ exit ;;
++ 3050*:HI-UX:*:*)
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++ #include <unistd.h>
++ int
++ main ()
++ {
++ long cpu = sysconf (_SC_CPU_VERSION);
++ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
++ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
++ results, however. */
++ if (CPU_IS_PA_RISC (cpu))
++ {
++ switch (cpu)
++ {
++ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
++ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
++ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
++ default: puts ("hppa-hitachi-hiuxwe2"); break;
++ }
++ }
++ else if (CPU_IS_HP_MC68K (cpu))
++ puts ("m68k-hitachi-hiuxwe2");
++ else puts ("unknown-hitachi-hiuxwe2");
++ exit (0);
++ }
++EOF
++ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
++ { echo "$SYSTEM_NAME"; exit; }
++ echo unknown-hitachi-hiuxwe2
++ exit ;;
++ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
++ echo hppa1.1-hp-bsd
++ exit ;;
++ 9000/8??:4.3bsd:*:*)
++ echo hppa1.0-hp-bsd
++ exit ;;
++ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
++ echo hppa1.0-hp-mpeix
++ exit ;;
++ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
++ echo hppa1.1-hp-osf
++ exit ;;
++ hp8??:OSF1:*:*)
++ echo hppa1.0-hp-osf
++ exit ;;
++ i*86:OSF1:*:*)
++ if [ -x /usr/sbin/sysversion ] ; then
++ echo ${UNAME_MACHINE}-unknown-osf1mk
++ else
++ echo ${UNAME_MACHINE}-unknown-osf1
++ fi
++ exit ;;
++ parisc*:Lites*:*:*)
++ echo hppa1.1-hp-lites
++ exit ;;
++ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
++ echo c1-convex-bsd
++ exit ;;
++ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
++ if getsysinfo -f scalar_acc
++ then echo c32-convex-bsd
++ else echo c2-convex-bsd
++ fi
++ exit ;;
++ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
++ echo c34-convex-bsd
++ exit ;;
++ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
++ echo c38-convex-bsd
++ exit ;;
++ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
++ echo c4-convex-bsd
++ exit ;;
++ CRAY*Y-MP:*:*:*)
++ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++ exit ;;
++ CRAY*[A-Z]90:*:*:*)
++ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
++ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
++ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
++ -e 's/\.[^.]*$/.X/'
++ exit ;;
++ CRAY*TS:*:*:*)
++ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++ exit ;;
++ CRAY*T3E:*:*:*)
++ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++ exit ;;
++ CRAY*SV1:*:*:*)
++ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++ exit ;;
++ *:UNICOS/mp:*:*)
++ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++ exit ;;
++ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
++ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
++ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
++ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
++ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
++ exit ;;
++ 5000:UNIX_System_V:4.*:*)
++ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
++ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
++ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
++ exit ;;
++ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
++ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
++ exit ;;
++ sparc*:BSD/OS:*:*)
++ echo sparc-unknown-bsdi${UNAME_RELEASE}
++ exit ;;
++ *:BSD/OS:*:*)
++ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
++ exit ;;
++ *:FreeBSD:*:*)
++ UNAME_PROCESSOR=`/usr/bin/uname -p`
++ case ${UNAME_PROCESSOR} in
++ amd64)
++ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
++ *)
++ echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
++ esac
++ exit ;;
++ i*:CYGWIN*:*)
++ echo ${UNAME_MACHINE}-pc-cygwin
++ exit ;;
++ *:MINGW*:*)
++ echo ${UNAME_MACHINE}-pc-mingw32
++ exit ;;
++ i*:MSYS*:*)
++ echo ${UNAME_MACHINE}-pc-msys
++ exit ;;
++ i*:windows32*:*)
++ # uname -m includes "-pc" on this system.
++ echo ${UNAME_MACHINE}-mingw32
++ exit ;;
++ i*:PW*:*)
++ echo ${UNAME_MACHINE}-pc-pw32
++ exit ;;
++ *:Interix*:*)
++ case ${UNAME_MACHINE} in
++ x86)
++ echo i586-pc-interix${UNAME_RELEASE}
++ exit ;;
++ authenticamd | genuineintel | EM64T)
++ echo x86_64-unknown-interix${UNAME_RELEASE}
++ exit ;;
++ IA64)
++ echo ia64-unknown-interix${UNAME_RELEASE}
++ exit ;;
++ esac ;;
++ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
++ echo i${UNAME_MACHINE}-pc-mks
++ exit ;;
++ 8664:Windows_NT:*)
++ echo x86_64-pc-mks
++ exit ;;
++ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
++ # How do we know it's Interix rather than the generic POSIX subsystem?
++ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
++ # UNAME_MACHINE based on the output of uname instead of i386?
++ echo i586-pc-interix
++ exit ;;
++ i*:UWIN*:*)
++ echo ${UNAME_MACHINE}-pc-uwin
++ exit ;;
++ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
++ echo x86_64-unknown-cygwin
++ exit ;;
++ p*:CYGWIN*:*)
++ echo powerpcle-unknown-cygwin
++ exit ;;
++ prep*:SunOS:5.*:*)
++ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
++ exit ;;
++ *:GNU:*:*)
++ # the GNU system
++ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
++ exit ;;
++ *:GNU/*:*:*)
++ # other systems with GNU libc and userland
++ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
++ exit ;;
++ i*86:Minix:*:*)
++ echo ${UNAME_MACHINE}-pc-minix
++ exit ;;
++ aarch64:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ aarch64_be:Linux:*:*)
++ UNAME_MACHINE=aarch64_be
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ alpha:Linux:*:*)
++ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
++ EV5) UNAME_MACHINE=alphaev5 ;;
++ EV56) UNAME_MACHINE=alphaev56 ;;
++ PCA56) UNAME_MACHINE=alphapca56 ;;
++ PCA57) UNAME_MACHINE=alphapca56 ;;
++ EV6) UNAME_MACHINE=alphaev6 ;;
++ EV67) UNAME_MACHINE=alphaev67 ;;
++ EV68*) UNAME_MACHINE=alphaev68 ;;
++ esac
++ objdump --private-headers /bin/sh | grep -q ld.so.1
++ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
++ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
++ exit ;;
++ arm*:Linux:*:*)
++ eval $set_cc_for_build
++ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
++ | grep -q __ARM_EABI__
++ then
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ else
++ if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
++ | grep -q __ARM_PCS_VFP
++ then
++ echo ${UNAME_MACHINE}-unknown-linux-gnueabi
++ else
++ echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
++ fi
++ fi
++ exit ;;
++ avr32*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ cris:Linux:*:*)
++ echo ${UNAME_MACHINE}-axis-linux-gnu
++ exit ;;
++ crisv32:Linux:*:*)
++ echo ${UNAME_MACHINE}-axis-linux-gnu
++ exit ;;
++ frv:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ hexagon:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ i*86:Linux:*:*)
++ LIBC=gnu
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++ #ifdef __dietlibc__
++ LIBC=dietlibc
++ #endif
++EOF
++ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
++ echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
++ exit ;;
++ ia64:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ m32r*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ m68*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ mips:Linux:*:* | mips64:Linux:*:*)
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++ #undef CPU
++ #undef ${UNAME_MACHINE}
++ #undef ${UNAME_MACHINE}el
++ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
++ CPU=${UNAME_MACHINE}el
++ #else
++ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
++ CPU=${UNAME_MACHINE}
++ #else
++ CPU=
++ #endif
++ #endif
++EOF
++ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
++ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
++ ;;
++ or32:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ padre:Linux:*:*)
++ echo sparc-unknown-linux-gnu
++ exit ;;
++ parisc64:Linux:*:* | hppa64:Linux:*:*)
++ echo hppa64-unknown-linux-gnu
++ exit ;;
++ parisc:Linux:*:* | hppa:Linux:*:*)
++ # Look for CPU level
++ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
++ PA7*) echo hppa1.1-unknown-linux-gnu ;;
++ PA8*) echo hppa2.0-unknown-linux-gnu ;;
++ *) echo hppa-unknown-linux-gnu ;;
++ esac
++ exit ;;
++ ppc64:Linux:*:*)
++ echo powerpc64-unknown-linux-gnu
++ exit ;;
++ ppc:Linux:*:*)
++ echo powerpc-unknown-linux-gnu
++ exit ;;
++ s390:Linux:*:* | s390x:Linux:*:*)
++ echo ${UNAME_MACHINE}-ibm-linux
++ exit ;;
++ sh64*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ sh*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ sparc:Linux:*:* | sparc64:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ tile*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ vax:Linux:*:*)
++ echo ${UNAME_MACHINE}-dec-linux-gnu
++ exit ;;
++ x86_64:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ xtensa*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit ;;
++ i*86:DYNIX/ptx:4*:*)
++ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
++ # earlier versions are messed up and put the nodename in both
++ # sysname and nodename.
++ echo i386-sequent-sysv4
++ exit ;;
++ i*86:UNIX_SV:4.2MP:2.*)
++ # Unixware is an offshoot of SVR4, but it has its own version
++ # number series starting with 2...
++ # I am not positive that other SVR4 systems won't match this,
++ # I just have to hope. -- rms.
++ # Use sysv4.2uw... so that sysv4* matches it.
++ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
++ exit ;;
++ i*86:OS/2:*:*)
++ # If we were able to find `uname', then EMX Unix compatibility
++ # is probably installed.
++ echo ${UNAME_MACHINE}-pc-os2-emx
++ exit ;;
++ i*86:XTS-300:*:STOP)
++ echo ${UNAME_MACHINE}-unknown-stop
++ exit ;;
++ i*86:atheos:*:*)
++ echo ${UNAME_MACHINE}-unknown-atheos
++ exit ;;
++ i*86:syllable:*:*)
++ echo ${UNAME_MACHINE}-pc-syllable
++ exit ;;
++ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
++ echo i386-unknown-lynxos${UNAME_RELEASE}
++ exit ;;
++ i*86:*DOS:*:*)
++ echo ${UNAME_MACHINE}-pc-msdosdjgpp
++ exit ;;
++ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
++ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
++ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
++ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
++ else
++ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
++ fi
++ exit ;;
++ i*86:*:5:[678]*)
++ # UnixWare 7.x, OpenUNIX and OpenServer 6.
++ case `/bin/uname -X | grep "^Machine"` in
++ *486*) UNAME_MACHINE=i486 ;;
++ *Pentium) UNAME_MACHINE=i586 ;;
++ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
++ esac
++ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
++ exit ;;
++ i*86:*:3.2:*)
++ if test -f /usr/options/cb.name; then
++ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
++ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
++ elif /bin/uname -X 2>/dev/null >/dev/null ; then
++ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
++ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
++ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
++ && UNAME_MACHINE=i586
++ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
++ && UNAME_MACHINE=i686
++ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
++ && UNAME_MACHINE=i686
++ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
++ else
++ echo ${UNAME_MACHINE}-pc-sysv32
++ fi
++ exit ;;
++ pc:*:*:*)
++ # Left here for compatibility:
++ # uname -m prints for DJGPP always 'pc', but it prints nothing about
++ # the processor, so we play safe by assuming i586.
++ # Note: whatever this is, it MUST be the same as what config.sub
++ # prints for the "djgpp" host, or else GDB configury will decide that
++ # this is a cross-build.
++ echo i586-pc-msdosdjgpp
++ exit ;;
++ Intel:Mach:3*:*)
++ echo i386-pc-mach3
++ exit ;;
++ paragon:*:*:*)
++ echo i860-intel-osf1
++ exit ;;
++ i860:*:4.*:*) # i860-SVR4
++ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
++ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
++ else # Add other i860-SVR4 vendors below as they are discovered.
++ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
++ fi
++ exit ;;
++ mini*:CTIX:SYS*5:*)
++ # "miniframe"
++ echo m68010-convergent-sysv
++ exit ;;
++ mc68k:UNIX:SYSTEM5:3.51m)
++ echo m68k-convergent-sysv
++ exit ;;
++ M680?0:D-NIX:5.3:*)
++ echo m68k-diab-dnix
++ exit ;;
++ M68*:*:R3V[5678]*:*)
++ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
++ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
++ OS_REL=''
++ test -r /etc/.relid \
++ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
++ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
++ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
++ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
++ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
++ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
++ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
++ && { echo i486-ncr-sysv4; exit; } ;;
++ NCR*:*:4.2:* | MPRAS*:*:4.2:*)
++ OS_REL='.3'
++ test -r /etc/.relid \
++ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
++ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
++ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
++ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
++ && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
++ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
++ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
++ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
++ echo m68k-unknown-lynxos${UNAME_RELEASE}
++ exit ;;
++ mc68030:UNIX_System_V:4.*:*)
++ echo m68k-atari-sysv4
++ exit ;;
++ TSUNAMI:LynxOS:2.*:*)
++ echo sparc-unknown-lynxos${UNAME_RELEASE}
++ exit ;;
++ rs6000:LynxOS:2.*:*)
++ echo rs6000-unknown-lynxos${UNAME_RELEASE}
++ exit ;;
++ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
++ echo powerpc-unknown-lynxos${UNAME_RELEASE}
++ exit ;;
++ SM[BE]S:UNIX_SV:*:*)
++ echo mips-dde-sysv${UNAME_RELEASE}
++ exit ;;
++ RM*:ReliantUNIX-*:*:*)
++ echo mips-sni-sysv4
++ exit ;;
++ RM*:SINIX-*:*:*)
++ echo mips-sni-sysv4
++ exit ;;
++ *:SINIX-*:*:*)
++ if uname -p 2>/dev/null >/dev/null ; then
++ UNAME_MACHINE=`(uname -p) 2>/dev/null`
++ echo ${UNAME_MACHINE}-sni-sysv4
++ else
++ echo ns32k-sni-sysv
++ fi
++ exit ;;
++ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
++ # says <Richard.M.Bartel@ccMail.Census.GOV>
++ echo i586-unisys-sysv4
++ exit ;;
++ *:UNIX_System_V:4*:FTX*)
++ # From Gerald Hewes <hewes@openmarket.com>.
++ # How about differentiating between stratus architectures? -djm
++ echo hppa1.1-stratus-sysv4
++ exit ;;
++ *:*:*:FTX*)
++ # From seanf@swdc.stratus.com.
++ echo i860-stratus-sysv4
++ exit ;;
++ i*86:VOS:*:*)
++ # From Paul.Green@stratus.com.
++ echo ${UNAME_MACHINE}-stratus-vos
++ exit ;;
++ *:VOS:*:*)
++ # From Paul.Green@stratus.com.
++ echo hppa1.1-stratus-vos
++ exit ;;
++ mc68*:A/UX:*:*)
++ echo m68k-apple-aux${UNAME_RELEASE}
++ exit ;;
++ news*:NEWS-OS:6*:*)
++ echo mips-sony-newsos6
++ exit ;;
++ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
++ if [ -d /usr/nec ]; then
++ echo mips-nec-sysv${UNAME_RELEASE}
++ else
++ echo mips-unknown-sysv${UNAME_RELEASE}
++ fi
++ exit ;;
++ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
++ echo powerpc-be-beos
++ exit ;;
++ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
++ echo powerpc-apple-beos
++ exit ;;
++ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
++ echo i586-pc-beos
++ exit ;;
++ BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
++ echo i586-pc-haiku
++ exit ;;
++ SX-4:SUPER-UX:*:*)
++ echo sx4-nec-superux${UNAME_RELEASE}
++ exit ;;
++ SX-5:SUPER-UX:*:*)
++ echo sx5-nec-superux${UNAME_RELEASE}
++ exit ;;
++ SX-6:SUPER-UX:*:*)
++ echo sx6-nec-superux${UNAME_RELEASE}
++ exit ;;
++ SX-7:SUPER-UX:*:*)
++ echo sx7-nec-superux${UNAME_RELEASE}
++ exit ;;
++ SX-8:SUPER-UX:*:*)
++ echo sx8-nec-superux${UNAME_RELEASE}
++ exit ;;
++ SX-8R:SUPER-UX:*:*)
++ echo sx8r-nec-superux${UNAME_RELEASE}
++ exit ;;
++ Power*:Rhapsody:*:*)
++ echo powerpc-apple-rhapsody${UNAME_RELEASE}
++ exit ;;
++ *:Rhapsody:*:*)
++ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
++ exit ;;
++ *:Darwin:*:*)
++ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
++ case $UNAME_PROCESSOR in
++ i386)
++ eval $set_cc_for_build
++ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
++ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
++ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
++ grep IS_64BIT_ARCH >/dev/null
++ then
++ UNAME_PROCESSOR="x86_64"
++ fi
++ fi ;;
++ unknown) UNAME_PROCESSOR=powerpc ;;
++ esac
++ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
++ exit ;;
++ *:procnto*:*:* | *:QNX:[0123456789]*:*)
++ UNAME_PROCESSOR=`uname -p`
++ if test "$UNAME_PROCESSOR" = "x86"; then
++ UNAME_PROCESSOR=i386
++ UNAME_MACHINE=pc
++ fi
++ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
++ exit ;;
++ *:QNX:*:4*)
++ echo i386-pc-qnx
++ exit ;;
++ NEO-?:NONSTOP_KERNEL:*:*)
++ echo neo-tandem-nsk${UNAME_RELEASE}
++ exit ;;
++ NSE-?:NONSTOP_KERNEL:*:*)
++ echo nse-tandem-nsk${UNAME_RELEASE}
++ exit ;;
++ NSR-?:NONSTOP_KERNEL:*:*)
++ echo nsr-tandem-nsk${UNAME_RELEASE}
++ exit ;;
++ *:NonStop-UX:*:*)
++ echo mips-compaq-nonstopux
++ exit ;;
++ BS2000:POSIX*:*:*)
++ echo bs2000-siemens-sysv
++ exit ;;
++ DS/*:UNIX_System_V:*:*)
++ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
++ exit ;;
++ *:Plan9:*:*)
++ # "uname -m" is not consistent, so use $cputype instead. 386
++ # is converted to i386 for consistency with other x86
++ # operating systems.
++ if test "$cputype" = "386"; then
++ UNAME_MACHINE=i386
++ else
++ UNAME_MACHINE="$cputype"
++ fi
++ echo ${UNAME_MACHINE}-unknown-plan9
++ exit ;;
++ *:TOPS-10:*:*)
++ echo pdp10-unknown-tops10
++ exit ;;
++ *:TENEX:*:*)
++ echo pdp10-unknown-tenex
++ exit ;;
++ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
++ echo pdp10-dec-tops20
++ exit ;;
++ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
++ echo pdp10-xkl-tops20
++ exit ;;
++ *:TOPS-20:*:*)
++ echo pdp10-unknown-tops20
++ exit ;;
++ *:ITS:*:*)
++ echo pdp10-unknown-its
++ exit ;;
++ SEI:*:*:SEIUX)
++ echo mips-sei-seiux${UNAME_RELEASE}
++ exit ;;
++ *:DragonFly:*:*)
++ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
++ exit ;;
++ *:*VMS:*:*)
++ UNAME_MACHINE=`(uname -p) 2>/dev/null`
++ case "${UNAME_MACHINE}" in
++ A*) echo alpha-dec-vms ; exit ;;
++ I*) echo ia64-dec-vms ; exit ;;
++ V*) echo vax-dec-vms ; exit ;;
++ esac ;;
++ *:XENIX:*:SysV)
++ echo i386-pc-xenix
++ exit ;;
++ i*86:skyos:*:*)
++ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
++ exit ;;
++ i*86:rdos:*:*)
++ echo ${UNAME_MACHINE}-pc-rdos
++ exit ;;
++ i*86:AROS:*:*)
++ echo ${UNAME_MACHINE}-pc-aros
++ exit ;;
++ x86_64:VMkernel:*:*)
++ echo ${UNAME_MACHINE}-unknown-esx
++ exit ;;
++esac
++
++#echo '(No uname command or uname output not recognized.)' 1>&2
++#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
++
++eval $set_cc_for_build
++cat >$dummy.c <<EOF
++#ifdef _SEQUENT_
++# include <sys/types.h>
++# include <sys/utsname.h>
++#endif
++main ()
++{
++#if defined (sony)
++#if defined (MIPSEB)
++ /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
++ I don't know.... */
++ printf ("mips-sony-bsd\n"); exit (0);
++#else
++#include <sys/param.h>
++ printf ("m68k-sony-newsos%s\n",
++#ifdef NEWSOS4
++ "4"
++#else
++ ""
++#endif
++ ); exit (0);
++#endif
++#endif
++
++#if defined (__arm) && defined (__acorn) && defined (__unix)
++ printf ("arm-acorn-riscix\n"); exit (0);
++#endif
++
++#if defined (hp300) && !defined (hpux)
++ printf ("m68k-hp-bsd\n"); exit (0);
++#endif
++
++#if defined (NeXT)
++#if !defined (__ARCHITECTURE__)
++#define __ARCHITECTURE__ "m68k"
++#endif
++ int version;
++ version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
++ if (version < 4)
++ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
++ else
++ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
++ exit (0);
++#endif
++
++#if defined (MULTIMAX) || defined (n16)
++#if defined (UMAXV)
++ printf ("ns32k-encore-sysv\n"); exit (0);
++#else
++#if defined (CMU)
++ printf ("ns32k-encore-mach\n"); exit (0);
++#else
++ printf ("ns32k-encore-bsd\n"); exit (0);
++#endif
++#endif
++#endif
++
++#if defined (__386BSD__)
++ printf ("i386-pc-bsd\n"); exit (0);
++#endif
++
++#if defined (sequent)
++#if defined (i386)
++ printf ("i386-sequent-dynix\n"); exit (0);
++#endif
++#if defined (ns32000)
++ printf ("ns32k-sequent-dynix\n"); exit (0);
++#endif
++#endif
++
++#if defined (_SEQUENT_)
++ struct utsname un;
++
++ uname(&un);
++
++ if (strncmp(un.version, "V2", 2) == 0) {
++ printf ("i386-sequent-ptx2\n"); exit (0);
++ }
++ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
++ printf ("i386-sequent-ptx1\n"); exit (0);
++ }
++ printf ("i386-sequent-ptx\n"); exit (0);
++
++#endif
++
++#if defined (vax)
++# if !defined (ultrix)
++# include <sys/param.h>
++# if defined (BSD)
++# if BSD == 43
++ printf ("vax-dec-bsd4.3\n"); exit (0);
++# else
++# if BSD == 199006
++ printf ("vax-dec-bsd4.3reno\n"); exit (0);
++# else
++ printf ("vax-dec-bsd\n"); exit (0);
++# endif
++# endif
++# else
++ printf ("vax-dec-bsd\n"); exit (0);
++# endif
++# else
++ printf ("vax-dec-ultrix\n"); exit (0);
++# endif
++#endif
++
++#if defined (alliant) && defined (i860)
++ printf ("i860-alliant-bsd\n"); exit (0);
++#endif
++
++ exit (1);
++}
++EOF
++
++$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
++ { echo "$SYSTEM_NAME"; exit; }
++
++# Apollos put the system type in the environment.
++
++test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
++
++# Convex versions that predate uname can use getsysinfo(1)
++
++if [ -x /usr/convex/getsysinfo ]
++then
++ case `getsysinfo -f cpu_type` in
++ c1*)
++ echo c1-convex-bsd
++ exit ;;
++ c2*)
++ if getsysinfo -f scalar_acc
++ then echo c32-convex-bsd
++ else echo c2-convex-bsd
++ fi
++ exit ;;
++ c34*)
++ echo c34-convex-bsd
++ exit ;;
++ c38*)
++ echo c38-convex-bsd
++ exit ;;
++ c4*)
++ echo c4-convex-bsd
++ exit ;;
++ esac
++fi
++
++cat >&2 <<EOF
++$0: unable to guess system type
++
++This script, last modified $timestamp, has failed to recognize
++the operating system you are using. It is advised that you
++download the most up to date version of the config scripts from
++
++ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
++and
++ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
++
++If the version you run ($0) is already up to date, please
++send the following data and any information you think might be
++pertinent to <config-patches@gnu.org> in order to provide the needed
++information to handle your system.
++
++config.guess timestamp = $timestamp
++
++uname -m = `(uname -m) 2>/dev/null || echo unknown`
++uname -r = `(uname -r) 2>/dev/null || echo unknown`
++uname -s = `(uname -s) 2>/dev/null || echo unknown`
++uname -v = `(uname -v) 2>/dev/null || echo unknown`
++
++/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
++/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
++
++hostinfo = `(hostinfo) 2>/dev/null`
++/bin/universe = `(/bin/universe) 2>/dev/null`
++/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
++/bin/arch = `(/bin/arch) 2>/dev/null`
++/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
++/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
++
++UNAME_MACHINE = ${UNAME_MACHINE}
++UNAME_RELEASE = ${UNAME_RELEASE}
++UNAME_SYSTEM = ${UNAME_SYSTEM}
++UNAME_VERSION = ${UNAME_VERSION}
++EOF
++
++exit 1
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "timestamp='"
++# time-stamp-format: "%:y-%02m-%02d"
++# time-stamp-end: "'"
++# End:
+--- openjade1.3-1.3.2.orig/config.sub
++++ openjade1.3-1.3.2/config.sub
+@@ -0,0 +1,1773 @@
++#! /bin/sh
++# Configuration validation subroutine script.
++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
++# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
++# 2011, 2012 Free Software Foundation, Inc.
++
++timestamp='2012-02-10'
++
++# This file is (in principle) common to ALL GNU software.
++# The presence of a machine in this file suggests that SOME GNU software
++# can handle that machine. It does not imply ALL GNU software can.
++#
++# This file is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, see <http://www.gnu.org/licenses/>.
++#
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++
++# Please send patches to <config-patches@gnu.org>. Submit a context
++# diff and a properly formatted GNU ChangeLog entry.
++#
++# Configuration subroutine to validate and canonicalize a configuration type.
++# Supply the specified configuration type as an argument.
++# If it is invalid, we print an error message on stderr and exit with code 1.
++# Otherwise, we print the canonical config type on stdout and succeed.
++
++# You can get the latest version of this script from:
++# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
++
++# This file is supposed to be the same for all GNU packages
++# and recognize all the CPU types, system types and aliases
++# that are meaningful with *any* GNU software.
++# Each package is responsible for reporting which valid configurations
++# it does not support. The user should be able to distinguish
++# a failure to support a valid configuration from a meaningless
++# configuration.
++
++# The goal of this file is to map all the various variations of a given
++# machine specification into a single specification in the form:
++# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
++# or in some cases, the newer four-part form:
++# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
++# It is wrong to echo any other type of specification.
++
++me=`echo "$0" | sed -e 's,.*/,,'`
++
++usage="\
++Usage: $0 [OPTION] CPU-MFR-OPSYS
++ $0 [OPTION] ALIAS
++
++Canonicalize a configuration name.
++
++Operation modes:
++ -h, --help print this help, then exit
++ -t, --time-stamp print date of last modification, then exit
++ -v, --version print version number, then exit
++
++Report bugs and patches to <config-patches@gnu.org>."
++
++version="\
++GNU config.sub ($timestamp)
++
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
++2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
++Free Software Foundation, Inc.
++
++This is free software; see the source for copying conditions. There is NO
++warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
++
++help="
++Try \`$me --help' for more information."
++
++# Parse command line
++while test $# -gt 0 ; do
++ case $1 in
++ --time-stamp | --time* | -t )
++ echo "$timestamp" ; exit ;;
++ --version | -v )
++ echo "$version" ; exit ;;
++ --help | --h* | -h )
++ echo "$usage"; exit ;;
++ -- ) # Stop option processing
++ shift; break ;;
++ - ) # Use stdin as input.
++ break ;;
++ -* )
++ echo "$me: invalid option $1$help"
++ exit 1 ;;
++
++ *local*)
++ # First pass through any local machine types.
++ echo $1
++ exit ;;
++
++ * )
++ break ;;
++ esac
++done
++
++case $# in
++ 0) echo "$me: missing argument$help" >&2
++ exit 1;;
++ 1) ;;
++ *) echo "$me: too many arguments$help" >&2
++ exit 1;;
++esac
++
++# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
++# Here we must recognize all the valid KERNEL-OS combinations.
++maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
++case $maybe_os in
++ nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
++ linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
++ knetbsd*-gnu* | netbsd*-gnu* | \
++ kopensolaris*-gnu* | \
++ storm-chaos* | os2-emx* | rtmk-nova*)
++ os=-$maybe_os
++ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
++ ;;
++ android-linux)
++ os=-linux-android
++ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
++ ;;
++ *)
++ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
++ if [ $basic_machine != $1 ]
++ then os=`echo $1 | sed 's/.*-/-/'`
++ else os=; fi
++ ;;
++esac
++
++### Let's recognize common machines as not being operating systems so
++### that things like config.sub decstation-3100 work. We also
++### recognize some manufacturers as not being operating systems, so we
++### can provide default operating systems below.
++case $os in
++ -sun*os*)
++ # Prevent following clause from handling this invalid input.
++ ;;
++ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
++ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
++ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
++ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
++ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
++ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
++ -apple | -axis | -knuth | -cray | -microblaze)
++ os=
++ basic_machine=$1
++ ;;
++ -bluegene*)
++ os=-cnk
++ ;;
++ -sim | -cisco | -oki | -wec | -winbond)
++ os=
++ basic_machine=$1
++ ;;
++ -scout)
++ ;;
++ -wrs)
++ os=-vxworks
++ basic_machine=$1
++ ;;
++ -chorusos*)
++ os=-chorusos
++ basic_machine=$1
++ ;;
++ -chorusrdb)
++ os=-chorusrdb
++ basic_machine=$1
++ ;;
++ -hiux*)
++ os=-hiuxwe2
++ ;;
++ -sco6)
++ os=-sco5v6
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -sco5)
++ os=-sco3.2v5
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -sco4)
++ os=-sco3.2v4
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -sco3.2.[4-9]*)
++ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -sco3.2v[4-9]*)
++ # Don't forget version if it is 3.2v4 or newer.
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -sco5v6*)
++ # Don't forget version if it is 3.2v4 or newer.
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -sco*)
++ os=-sco3.2v2
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -udk*)
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -isc)
++ os=-isc2.2
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -clix*)
++ basic_machine=clipper-intergraph
++ ;;
++ -isc*)
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
++ ;;
++ -lynx*)
++ os=-lynxos
++ ;;
++ -ptx*)
++ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
++ ;;
++ -windowsnt*)
++ os=`echo $os | sed -e 's/windowsnt/winnt/'`
++ ;;
++ -psos*)
++ os=-psos
++ ;;
++ -mint | -mint[0-9]*)
++ basic_machine=m68k-atari
++ os=-mint
++ ;;
++esac
++
++# Decode aliases for certain CPU-COMPANY combinations.
++case $basic_machine in
++ # Recognize the basic CPU types without company name.
++ # Some are omitted here because they have special meanings below.
++ 1750a | 580 \
++ | a29k \
++ | aarch64 | aarch64_be \
++ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
++ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
++ | am33_2.0 \
++ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
++ | be32 | be64 \
++ | bfin \
++ | c4x | clipper \
++ | d10v | d30v | dlx | dsp16xx \
++ | epiphany \
++ | fido | fr30 | frv \
++ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
++ | hexagon \
++ | i370 | i860 | i960 | ia64 \
++ | ip2k | iq2000 \
++ | le32 | le64 \
++ | lm32 \
++ | m32c | m32r | m32rle | m68000 | m68k | m88k \
++ | maxq | mb | microblaze | mcore | mep | metag \
++ | mips | mipsbe | mipseb | mipsel | mipsle \
++ | mips16 \
++ | mips64 | mips64el \
++ | mips64octeon | mips64octeonel \
++ | mips64orion | mips64orionel \
++ | mips64r5900 | mips64r5900el \
++ | mips64vr | mips64vrel \
++ | mips64vr4100 | mips64vr4100el \
++ | mips64vr4300 | mips64vr4300el \
++ | mips64vr5000 | mips64vr5000el \
++ | mips64vr5900 | mips64vr5900el \
++ | mipsisa32 | mipsisa32el \
++ | mipsisa32r2 | mipsisa32r2el \
++ | mipsisa64 | mipsisa64el \
++ | mipsisa64r2 | mipsisa64r2el \
++ | mipsisa64sb1 | mipsisa64sb1el \
++ | mipsisa64sr71k | mipsisa64sr71kel \
++ | mipstx39 | mipstx39el \
++ | mn10200 | mn10300 \
++ | moxie \
++ | mt \
++ | msp430 \
++ | nds32 | nds32le | nds32be \
++ | nios | nios2 \
++ | ns16k | ns32k \
++ | open8 \
++ | or32 \
++ | pdp10 | pdp11 | pj | pjl \
++ | powerpc | powerpc64 | powerpc64le | powerpcle \
++ | pyramid \
++ | rl78 | rx \
++ | score \
++ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
++ | sh64 | sh64le \
++ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
++ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
++ | spu \
++ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
++ | ubicom32 \
++ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
++ | we32k \
++ | x86 | xc16x | xstormy16 | xtensa \
++ | z8k | z80)
++ basic_machine=$basic_machine-unknown
++ ;;
++ c54x)
++ basic_machine=tic54x-unknown
++ ;;
++ c55x)
++ basic_machine=tic55x-unknown
++ ;;
++ c6x)
++ basic_machine=tic6x-unknown
++ ;;
++ m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
++ basic_machine=$basic_machine-unknown
++ os=-none
++ ;;
++ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
++ ;;
++ ms1)
++ basic_machine=mt-unknown
++ ;;
++
++ strongarm | thumb | xscale)
++ basic_machine=arm-unknown
++ ;;
++ xgate)
++ basic_machine=$basic_machine-unknown
++ os=-none
++ ;;
++ xscaleeb)
++ basic_machine=armeb-unknown
++ ;;
++
++ xscaleel)
++ basic_machine=armel-unknown
++ ;;
++
++ # We use `pc' rather than `unknown'
++ # because (1) that's what they normally are, and
++ # (2) the word "unknown" tends to confuse beginning users.
++ i*86 | x86_64)
++ basic_machine=$basic_machine-pc
++ ;;
++ # Object if more than one company name word.
++ *-*-*)
++ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
++ exit 1
++ ;;
++ # Recognize the basic CPU types with company name.
++ 580-* \
++ | a29k-* \
++ | aarch64-* | aarch64_be-* \
++ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
++ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
++ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
++ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
++ | avr-* | avr32-* \
++ | be32-* | be64-* \
++ | bfin-* | bs2000-* \
++ | c[123]* | c30-* | [cjt]90-* | c4x-* \
++ | clipper-* | craynv-* | cydra-* \
++ | d10v-* | d30v-* | dlx-* \
++ | elxsi-* \
++ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
++ | h8300-* | h8500-* \
++ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
++ | hexagon-* \
++ | i*86-* | i860-* | i960-* | ia64-* \
++ | ip2k-* | iq2000-* \
++ | le32-* | le64-* \
++ | lm32-* \
++ | m32c-* | m32r-* | m32rle-* \
++ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
++ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
++ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
++ | mips16-* \
++ | mips64-* | mips64el-* \
++ | mips64octeon-* | mips64octeonel-* \
++ | mips64orion-* | mips64orionel-* \
++ | mips64r5900-* | mips64r5900el-* \
++ | mips64vr-* | mips64vrel-* \
++ | mips64vr4100-* | mips64vr4100el-* \
++ | mips64vr4300-* | mips64vr4300el-* \
++ | mips64vr5000-* | mips64vr5000el-* \
++ | mips64vr5900-* | mips64vr5900el-* \
++ | mipsisa32-* | mipsisa32el-* \
++ | mipsisa32r2-* | mipsisa32r2el-* \
++ | mipsisa64-* | mipsisa64el-* \
++ | mipsisa64r2-* | mipsisa64r2el-* \
++ | mipsisa64sb1-* | mipsisa64sb1el-* \
++ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
++ | mipstx39-* | mipstx39el-* \
++ | mmix-* \
++ | mt-* \
++ | msp430-* \
++ | nds32-* | nds32le-* | nds32be-* \
++ | nios-* | nios2-* \
++ | none-* | np1-* | ns16k-* | ns32k-* \
++ | open8-* \
++ | orion-* \
++ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
++ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
++ | pyramid-* \
++ | rl78-* | romp-* | rs6000-* | rx-* \
++ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
++ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
++ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
++ | sparclite-* \
++ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
++ | tahoe-* \
++ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
++ | tile*-* \
++ | tron-* \
++ | ubicom32-* \
++ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
++ | vax-* \
++ | we32k-* \
++ | x86-* | x86_64-* | xc16x-* | xps100-* \
++ | xstormy16-* | xtensa*-* \
++ | ymp-* \
++ | z8k-* | z80-*)
++ ;;
++ # Recognize the basic CPU types without company name, with glob match.
++ xtensa*)
++ basic_machine=$basic_machine-unknown
++ ;;
++ # Recognize the various machine names and aliases which stand
++ # for a CPU type and a company and sometimes even an OS.
++ 386bsd)
++ basic_machine=i386-unknown
++ os=-bsd
++ ;;
++ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
++ basic_machine=m68000-att
++ ;;
++ 3b*)
++ basic_machine=we32k-att
++ ;;
++ a29khif)
++ basic_machine=a29k-amd
++ os=-udi
++ ;;
++ abacus)
++ basic_machine=abacus-unknown
++ ;;
++ adobe68k)
++ basic_machine=m68010-adobe
++ os=-scout
++ ;;
++ alliant | fx80)
++ basic_machine=fx80-alliant
++ ;;
++ altos | altos3068)
++ basic_machine=m68k-altos
++ ;;
++ am29k)
++ basic_machine=a29k-none
++ os=-bsd
++ ;;
++ amd64)
++ basic_machine=x86_64-pc
++ ;;
++ amd64-*)
++ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ amdahl)
++ basic_machine=580-amdahl
++ os=-sysv
++ ;;
++ amiga | amiga-*)
++ basic_machine=m68k-unknown
++ ;;
++ amigaos | amigados)
++ basic_machine=m68k-unknown
++ os=-amigaos
++ ;;
++ amigaunix | amix)
++ basic_machine=m68k-unknown
++ os=-sysv4
++ ;;
++ apollo68)
++ basic_machine=m68k-apollo
++ os=-sysv
++ ;;
++ apollo68bsd)
++ basic_machine=m68k-apollo
++ os=-bsd
++ ;;
++ aros)
++ basic_machine=i386-pc
++ os=-aros
++ ;;
++ aux)
++ basic_machine=m68k-apple
++ os=-aux
++ ;;
++ balance)
++ basic_machine=ns32k-sequent
++ os=-dynix
++ ;;
++ blackfin)
++ basic_machine=bfin-unknown
++ os=-linux
++ ;;
++ blackfin-*)
++ basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
++ os=-linux
++ ;;
++ bluegene*)
++ basic_machine=powerpc-ibm
++ os=-cnk
++ ;;
++ c54x-*)
++ basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ c55x-*)
++ basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ c6x-*)
++ basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ c90)
++ basic_machine=c90-cray
++ os=-unicos
++ ;;
++ cegcc)
++ basic_machine=arm-unknown
++ os=-cegcc
++ ;;
++ convex-c1)
++ basic_machine=c1-convex
++ os=-bsd
++ ;;
++ convex-c2)
++ basic_machine=c2-convex
++ os=-bsd
++ ;;
++ convex-c32)
++ basic_machine=c32-convex
++ os=-bsd
++ ;;
++ convex-c34)
++ basic_machine=c34-convex
++ os=-bsd
++ ;;
++ convex-c38)
++ basic_machine=c38-convex
++ os=-bsd
++ ;;
++ cray | j90)
++ basic_machine=j90-cray
++ os=-unicos
++ ;;
++ craynv)
++ basic_machine=craynv-cray
++ os=-unicosmp
++ ;;
++ cr16 | cr16-*)
++ basic_machine=cr16-unknown
++ os=-elf
++ ;;
++ crds | unos)
++ basic_machine=m68k-crds
++ ;;
++ crisv32 | crisv32-* | etraxfs*)
++ basic_machine=crisv32-axis
++ ;;
++ cris | cris-* | etrax*)
++ basic_machine=cris-axis
++ ;;
++ crx)
++ basic_machine=crx-unknown
++ os=-elf
++ ;;
++ da30 | da30-*)
++ basic_machine=m68k-da30
++ ;;
++ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
++ basic_machine=mips-dec
++ ;;
++ decsystem10* | dec10*)
++ basic_machine=pdp10-dec
++ os=-tops10
++ ;;
++ decsystem20* | dec20*)
++ basic_machine=pdp10-dec
++ os=-tops20
++ ;;
++ delta | 3300 | motorola-3300 | motorola-delta \
++ | 3300-motorola | delta-motorola)
++ basic_machine=m68k-motorola
++ ;;
++ delta88)
++ basic_machine=m88k-motorola
++ os=-sysv3
++ ;;
++ dicos)
++ basic_machine=i686-pc
++ os=-dicos
++ ;;
++ djgpp)
++ basic_machine=i586-pc
++ os=-msdosdjgpp
++ ;;
++ dpx20 | dpx20-*)
++ basic_machine=rs6000-bull
++ os=-bosx
++ ;;
++ dpx2* | dpx2*-bull)
++ basic_machine=m68k-bull
++ os=-sysv3
++ ;;
++ ebmon29k)
++ basic_machine=a29k-amd
++ os=-ebmon
++ ;;
++ elxsi)
++ basic_machine=elxsi-elxsi
++ os=-bsd
++ ;;
++ encore | umax | mmax)
++ basic_machine=ns32k-encore
++ ;;
++ es1800 | OSE68k | ose68k | ose | OSE)
++ basic_machine=m68k-ericsson
++ os=-ose
++ ;;
++ fx2800)
++ basic_machine=i860-alliant
++ ;;
++ genix)
++ basic_machine=ns32k-ns
++ ;;
++ gmicro)
++ basic_machine=tron-gmicro
++ os=-sysv
++ ;;
++ go32)
++ basic_machine=i386-pc
++ os=-go32
++ ;;
++ h3050r* | hiux*)
++ basic_machine=hppa1.1-hitachi
++ os=-hiuxwe2
++ ;;
++ h8300hms)
++ basic_machine=h8300-hitachi
++ os=-hms
++ ;;
++ h8300xray)
++ basic_machine=h8300-hitachi
++ os=-xray
++ ;;
++ h8500hms)
++ basic_machine=h8500-hitachi
++ os=-hms
++ ;;
++ harris)
++ basic_machine=m88k-harris
++ os=-sysv3
++ ;;
++ hp300-*)
++ basic_machine=m68k-hp
++ ;;
++ hp300bsd)
++ basic_machine=m68k-hp
++ os=-bsd
++ ;;
++ hp300hpux)
++ basic_machine=m68k-hp
++ os=-hpux
++ ;;
++ hp3k9[0-9][0-9] | hp9[0-9][0-9])
++ basic_machine=hppa1.0-hp
++ ;;
++ hp9k2[0-9][0-9] | hp9k31[0-9])
++ basic_machine=m68000-hp
++ ;;
++ hp9k3[2-9][0-9])
++ basic_machine=m68k-hp
++ ;;
++ hp9k6[0-9][0-9] | hp6[0-9][0-9])
++ basic_machine=hppa1.0-hp
++ ;;
++ hp9k7[0-79][0-9] | hp7[0-79][0-9])
++ basic_machine=hppa1.1-hp
++ ;;
++ hp9k78[0-9] | hp78[0-9])
++ # FIXME: really hppa2.0-hp
++ basic_machine=hppa1.1-hp
++ ;;
++ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
++ # FIXME: really hppa2.0-hp
++ basic_machine=hppa1.1-hp
++ ;;
++ hp9k8[0-9][13679] | hp8[0-9][13679])
++ basic_machine=hppa1.1-hp
++ ;;
++ hp9k8[0-9][0-9] | hp8[0-9][0-9])
++ basic_machine=hppa1.0-hp
++ ;;
++ hppa-next)
++ os=-nextstep3
++ ;;
++ hppaosf)
++ basic_machine=hppa1.1-hp
++ os=-osf
++ ;;
++ hppro)
++ basic_machine=hppa1.1-hp
++ os=-proelf
++ ;;
++ i370-ibm* | ibm*)
++ basic_machine=i370-ibm
++ ;;
++ i*86v32)
++ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
++ os=-sysv32
++ ;;
++ i*86v4*)
++ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
++ os=-sysv4
++ ;;
++ i*86v)
++ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
++ os=-sysv
++ ;;
++ i*86sol2)
++ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
++ os=-solaris2
++ ;;
++ i386mach)
++ basic_machine=i386-mach
++ os=-mach
++ ;;
++ i386-vsta | vsta)
++ basic_machine=i386-unknown
++ os=-vsta
++ ;;
++ iris | iris4d)
++ basic_machine=mips-sgi
++ case $os in
++ -irix*)
++ ;;
++ *)
++ os=-irix4
++ ;;
++ esac
++ ;;
++ isi68 | isi)
++ basic_machine=m68k-isi
++ os=-sysv
++ ;;
++ m68knommu)
++ basic_machine=m68k-unknown
++ os=-linux
++ ;;
++ m68knommu-*)
++ basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
++ os=-linux
++ ;;
++ m88k-omron*)
++ basic_machine=m88k-omron
++ ;;
++ magnum | m3230)
++ basic_machine=mips-mips
++ os=-sysv
++ ;;
++ merlin)
++ basic_machine=ns32k-utek
++ os=-sysv
++ ;;
++ microblaze)
++ basic_machine=microblaze-xilinx
++ ;;
++ mingw32)
++ basic_machine=i386-pc
++ os=-mingw32
++ ;;
++ mingw32ce)
++ basic_machine=arm-unknown
++ os=-mingw32ce
++ ;;
++ miniframe)
++ basic_machine=m68000-convergent
++ ;;
++ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
++ basic_machine=m68k-atari
++ os=-mint
++ ;;
++ mips3*-*)
++ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
++ ;;
++ mips3*)
++ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
++ ;;
++ monitor)
++ basic_machine=m68k-rom68k
++ os=-coff
++ ;;
++ morphos)
++ basic_machine=powerpc-unknown
++ os=-morphos
++ ;;
++ msdos)
++ basic_machine=i386-pc
++ os=-msdos
++ ;;
++ ms1-*)
++ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
++ ;;
++ msys)
++ basic_machine=i386-pc
++ os=-msys
++ ;;
++ mvs)
++ basic_machine=i370-ibm
++ os=-mvs
++ ;;
++ nacl)
++ basic_machine=le32-unknown
++ os=-nacl
++ ;;
++ ncr3000)
++ basic_machine=i486-ncr
++ os=-sysv4
++ ;;
++ netbsd386)
++ basic_machine=i386-unknown
++ os=-netbsd
++ ;;
++ netwinder)
++ basic_machine=armv4l-rebel
++ os=-linux
++ ;;
++ news | news700 | news800 | news900)
++ basic_machine=m68k-sony
++ os=-newsos
++ ;;
++ news1000)
++ basic_machine=m68030-sony
++ os=-newsos
++ ;;
++ news-3600 | risc-news)
++ basic_machine=mips-sony
++ os=-newsos
++ ;;
++ necv70)
++ basic_machine=v70-nec
++ os=-sysv
++ ;;
++ next | m*-next )
++ basic_machine=m68k-next
++ case $os in
++ -nextstep* )
++ ;;
++ -ns2*)
++ os=-nextstep2
++ ;;
++ *)
++ os=-nextstep3
++ ;;
++ esac
++ ;;
++ nh3000)
++ basic_machine=m68k-harris
++ os=-cxux
++ ;;
++ nh[45]000)
++ basic_machine=m88k-harris
++ os=-cxux
++ ;;
++ nindy960)
++ basic_machine=i960-intel
++ os=-nindy
++ ;;
++ mon960)
++ basic_machine=i960-intel
++ os=-mon960
++ ;;
++ nonstopux)
++ basic_machine=mips-compaq
++ os=-nonstopux
++ ;;
++ np1)
++ basic_machine=np1-gould
++ ;;
++ neo-tandem)
++ basic_machine=neo-tandem
++ ;;
++ nse-tandem)
++ basic_machine=nse-tandem
++ ;;
++ nsr-tandem)
++ basic_machine=nsr-tandem
++ ;;
++ op50n-* | op60c-*)
++ basic_machine=hppa1.1-oki
++ os=-proelf
++ ;;
++ openrisc | openrisc-*)
++ basic_machine=or32-unknown
++ ;;
++ os400)
++ basic_machine=powerpc-ibm
++ os=-os400
++ ;;
++ OSE68000 | ose68000)
++ basic_machine=m68000-ericsson
++ os=-ose
++ ;;
++ os68k)
++ basic_machine=m68k-none
++ os=-os68k
++ ;;
++ pa-hitachi)
++ basic_machine=hppa1.1-hitachi
++ os=-hiuxwe2
++ ;;
++ paragon)
++ basic_machine=i860-intel
++ os=-osf
++ ;;
++ parisc)
++ basic_machine=hppa-unknown
++ os=-linux
++ ;;
++ parisc-*)
++ basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
++ os=-linux
++ ;;
++ pbd)
++ basic_machine=sparc-tti
++ ;;
++ pbb)
++ basic_machine=m68k-tti
++ ;;
++ pc532 | pc532-*)
++ basic_machine=ns32k-pc532
++ ;;
++ pc98)
++ basic_machine=i386-pc
++ ;;
++ pc98-*)
++ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ pentium | p5 | k5 | k6 | nexgen | viac3)
++ basic_machine=i586-pc
++ ;;
++ pentiumpro | p6 | 6x86 | athlon | athlon_*)
++ basic_machine=i686-pc
++ ;;
++ pentiumii | pentium2 | pentiumiii | pentium3)
++ basic_machine=i686-pc
++ ;;
++ pentium4)
++ basic_machine=i786-pc
++ ;;
++ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
++ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ pentiumpro-* | p6-* | 6x86-* | athlon-*)
++ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
++ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ pentium4-*)
++ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ pn)
++ basic_machine=pn-gould
++ ;;
++ power) basic_machine=power-ibm
++ ;;
++ ppc | ppcbe) basic_machine=powerpc-unknown
++ ;;
++ ppc-* | ppcbe-*)
++ basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ ppcle | powerpclittle | ppc-le | powerpc-little)
++ basic_machine=powerpcle-unknown
++ ;;
++ ppcle-* | powerpclittle-*)
++ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ ppc64) basic_machine=powerpc64-unknown
++ ;;
++ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
++ basic_machine=powerpc64le-unknown
++ ;;
++ ppc64le-* | powerpc64little-*)
++ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ ps2)
++ basic_machine=i386-ibm
++ ;;
++ pw32)
++ basic_machine=i586-unknown
++ os=-pw32
++ ;;
++ rdos)
++ basic_machine=i386-pc
++ os=-rdos
++ ;;
++ rom68k)
++ basic_machine=m68k-rom68k
++ os=-coff
++ ;;
++ rm[46]00)
++ basic_machine=mips-siemens
++ ;;
++ rtpc | rtpc-*)
++ basic_machine=romp-ibm
++ ;;
++ s390 | s390-*)
++ basic_machine=s390-ibm
++ ;;
++ s390x | s390x-*)
++ basic_machine=s390x-ibm
++ ;;
++ sa29200)
++ basic_machine=a29k-amd
++ os=-udi
++ ;;
++ sb1)
++ basic_machine=mipsisa64sb1-unknown
++ ;;
++ sb1el)
++ basic_machine=mipsisa64sb1el-unknown
++ ;;
++ sde)
++ basic_machine=mipsisa32-sde
++ os=-elf
++ ;;
++ sei)
++ basic_machine=mips-sei
++ os=-seiux
++ ;;
++ sequent)
++ basic_machine=i386-sequent
++ ;;
++ sh)
++ basic_machine=sh-hitachi
++ os=-hms
++ ;;
++ sh5el)
++ basic_machine=sh5le-unknown
++ ;;
++ sh64)
++ basic_machine=sh64-unknown
++ ;;
++ sparclite-wrs | simso-wrs)
++ basic_machine=sparclite-wrs
++ os=-vxworks
++ ;;
++ sps7)
++ basic_machine=m68k-bull
++ os=-sysv2
++ ;;
++ spur)
++ basic_machine=spur-unknown
++ ;;
++ st2000)
++ basic_machine=m68k-tandem
++ ;;
++ stratus)
++ basic_machine=i860-stratus
++ os=-sysv4
++ ;;
++ strongarm-* | thumb-*)
++ basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
++ sun2)
++ basic_machine=m68000-sun
++ ;;
++ sun2os3)
++ basic_machine=m68000-sun
++ os=-sunos3
++ ;;
++ sun2os4)
++ basic_machine=m68000-sun
++ os=-sunos4
++ ;;
++ sun3os3)
++ basic_machine=m68k-sun
++ os=-sunos3
++ ;;
++ sun3os4)
++ basic_machine=m68k-sun
++ os=-sunos4
++ ;;
++ sun4os3)
++ basic_machine=sparc-sun
++ os=-sunos3
++ ;;
++ sun4os4)
++ basic_machine=sparc-sun
++ os=-sunos4
++ ;;
++ sun4sol2)
++ basic_machine=sparc-sun
++ os=-solaris2
++ ;;
++ sun3 | sun3-*)
++ basic_machine=m68k-sun
++ ;;
++ sun4)
++ basic_machine=sparc-sun
++ ;;
++ sun386 | sun386i | roadrunner)
++ basic_machine=i386-sun
++ ;;
++ sv1)
++ basic_machine=sv1-cray
++ os=-unicos
++ ;;
++ symmetry)
++ basic_machine=i386-sequent
++ os=-dynix
++ ;;
++ t3e)
++ basic_machine=alphaev5-cray
++ os=-unicos
++ ;;
++ t90)
++ basic_machine=t90-cray
++ os=-unicos
++ ;;
++ tile*)
++ basic_machine=$basic_machine-unknown
++ os=-linux-gnu
++ ;;
++ tx39)
++ basic_machine=mipstx39-unknown
++ ;;
++ tx39el)
++ basic_machine=mipstx39el-unknown
++ ;;
++ toad1)
++ basic_machine=pdp10-xkl
++ os=-tops20
++ ;;
++ tower | tower-32)
++ basic_machine=m68k-ncr
++ ;;
++ tpf)
++ basic_machine=s390x-ibm
++ os=-tpf
++ ;;
++ udi29k)
++ basic_machine=a29k-amd
++ os=-udi
++ ;;
++ ultra3)
++ basic_machine=a29k-nyu
++ os=-sym1
++ ;;
++ v810 | necv810)
++ basic_machine=v810-nec
++ os=-none
++ ;;
++ vaxv)
++ basic_machine=vax-dec
++ os=-sysv
++ ;;
++ vms)
++ basic_machine=vax-dec
++ os=-vms
++ ;;
++ vpp*|vx|vx-*)
++ basic_machine=f301-fujitsu
++ ;;
++ vxworks960)
++ basic_machine=i960-wrs
++ os=-vxworks
++ ;;
++ vxworks68)
++ basic_machine=m68k-wrs
++ os=-vxworks
++ ;;
++ vxworks29k)
++ basic_machine=a29k-wrs
++ os=-vxworks
++ ;;
++ w65*)
++ basic_machine=w65-wdc
++ os=-none
++ ;;
++ w89k-*)
++ basic_machine=hppa1.1-winbond
++ os=-proelf
++ ;;
++ xbox)
++ basic_machine=i686-pc
++ os=-mingw32
++ ;;
++ xps | xps100)
++ basic_machine=xps100-honeywell
++ ;;
++ xscale-* | xscalee[bl]-*)
++ basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
++ ;;
++ ymp)
++ basic_machine=ymp-cray
++ os=-unicos
++ ;;
++ z8k-*-coff)
++ basic_machine=z8k-unknown
++ os=-sim
++ ;;
++ z80-*-coff)
++ basic_machine=z80-unknown
++ os=-sim
++ ;;
++ none)
++ basic_machine=none-none
++ os=-none
++ ;;
++
++# Here we handle the default manufacturer of certain CPU types. It is in
++# some cases the only manufacturer, in others, it is the most popular.
++ w89k)
++ basic_machine=hppa1.1-winbond
++ ;;
++ op50n)
++ basic_machine=hppa1.1-oki
++ ;;
++ op60c)
++ basic_machine=hppa1.1-oki
++ ;;
++ romp)
++ basic_machine=romp-ibm
++ ;;
++ mmix)
++ basic_machine=mmix-knuth
++ ;;
++ rs6000)
++ basic_machine=rs6000-ibm
++ ;;
++ vax)
++ basic_machine=vax-dec
++ ;;
++ pdp10)
++ # there are many clones, so DEC is not a safe bet
++ basic_machine=pdp10-unknown
++ ;;
++ pdp11)
++ basic_machine=pdp11-dec
++ ;;
++ we32k)
++ basic_machine=we32k-att
++ ;;
++ sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
++ basic_machine=sh-unknown
++ ;;
++ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
++ basic_machine=sparc-sun
++ ;;
++ cydra)
++ basic_machine=cydra-cydrome
++ ;;
++ orion)
++ basic_machine=orion-highlevel
++ ;;
++ orion105)
++ basic_machine=clipper-highlevel
++ ;;
++ mac | mpw | mac-mpw)
++ basic_machine=m68k-apple
++ ;;
++ pmac | pmac-mpw)
++ basic_machine=powerpc-apple
++ ;;
++ *-unknown)
++ # Make sure to match an already-canonicalized machine name.
++ ;;
++ *)
++ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
++ exit 1
++ ;;
++esac
++
++# Here we canonicalize certain aliases for manufacturers.
++case $basic_machine in
++ *-digital*)
++ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
++ ;;
++ *-commodore*)
++ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
++ ;;
++ *)
++ ;;
++esac
++
++# Decode manufacturer-specific aliases for certain operating systems.
++
++if [ x"$os" != x"" ]
++then
++case $os in
++ # First match some system type aliases
++ # that might get confused with valid system types.
++ # -solaris* is a basic system type, with this one exception.
++ -auroraux)
++ os=-auroraux
++ ;;
++ -solaris1 | -solaris1.*)
++ os=`echo $os | sed -e 's|solaris1|sunos4|'`
++ ;;
++ -solaris)
++ os=-solaris2
++ ;;
++ -svr4*)
++ os=-sysv4
++ ;;
++ -unixware*)
++ os=-sysv4.2uw
++ ;;
++ -gnu/linux*)
++ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
++ ;;
++ # First accept the basic system types.
++ # The portable systems comes first.
++ # Each alternative MUST END IN A *, to match a version number.
++ # -sysv* is not here because it comes later, after sysvr4.
++ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
++ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
++ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
++ | -sym* | -kopensolaris* \
++ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
++ | -aos* | -aros* \
++ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
++ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
++ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
++ | -openbsd* | -solidbsd* \
++ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
++ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
++ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
++ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
++ | -chorusos* | -chorusrdb* | -cegcc* \
++ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
++ | -mingw32* | -linux-gnu* | -linux-android* \
++ | -linux-newlib* | -linux-uclibc* \
++ | -uxpv* | -beos* | -mpeix* | -udk* \
++ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
++ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
++ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
++ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
++ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
++ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
++ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
++ # Remember, each alternative MUST END IN *, to match a version number.
++ ;;
++ -qnx*)
++ case $basic_machine in
++ x86-* | i*86-*)
++ ;;
++ *)
++ os=-nto$os
++ ;;
++ esac
++ ;;
++ -nto-qnx*)
++ ;;
++ -nto*)
++ os=`echo $os | sed -e 's|nto|nto-qnx|'`
++ ;;
++ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
++ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
++ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
++ ;;
++ -mac*)
++ os=`echo $os | sed -e 's|mac|macos|'`
++ ;;
++ -linux-dietlibc)
++ os=-linux-dietlibc
++ ;;
++ -linux*)
++ os=`echo $os | sed -e 's|linux|linux-gnu|'`
++ ;;
++ -sunos5*)
++ os=`echo $os | sed -e 's|sunos5|solaris2|'`
++ ;;
++ -sunos6*)
++ os=`echo $os | sed -e 's|sunos6|solaris3|'`
++ ;;
++ -opened*)
++ os=-openedition
++ ;;
++ -os400*)
++ os=-os400
++ ;;
++ -wince*)
++ os=-wince
++ ;;
++ -osfrose*)
++ os=-osfrose
++ ;;
++ -osf*)
++ os=-osf
++ ;;
++ -utek*)
++ os=-bsd
++ ;;
++ -dynix*)
++ os=-bsd
++ ;;
++ -acis*)
++ os=-aos
++ ;;
++ -atheos*)
++ os=-atheos
++ ;;
++ -syllable*)
++ os=-syllable
++ ;;
++ -386bsd)
++ os=-bsd
++ ;;
++ -ctix* | -uts*)
++ os=-sysv
++ ;;
++ -nova*)
++ os=-rtmk-nova
++ ;;
++ -ns2 )
++ os=-nextstep2
++ ;;
++ -nsk*)
++ os=-nsk
++ ;;
++ # Preserve the version number of sinix5.
++ -sinix5.*)
++ os=`echo $os | sed -e 's|sinix|sysv|'`
++ ;;
++ -sinix*)
++ os=-sysv4
++ ;;
++ -tpf*)
++ os=-tpf
++ ;;
++ -triton*)
++ os=-sysv3
++ ;;
++ -oss*)
++ os=-sysv3
++ ;;
++ -svr4)
++ os=-sysv4
++ ;;
++ -svr3)
++ os=-sysv3
++ ;;
++ -sysvr4)
++ os=-sysv4
++ ;;
++ # This must come after -sysvr4.
++ -sysv*)
++ ;;
++ -ose*)
++ os=-ose
++ ;;
++ -es1800*)
++ os=-ose
++ ;;
++ -xenix)
++ os=-xenix
++ ;;
++ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
++ os=-mint
++ ;;
++ -aros*)
++ os=-aros
++ ;;
++ -kaos*)
++ os=-kaos
++ ;;
++ -zvmoe)
++ os=-zvmoe
++ ;;
++ -dicos*)
++ os=-dicos
++ ;;
++ -nacl*)
++ ;;
++ -none)
++ ;;
++ *)
++ # Get rid of the `-' at the beginning of $os.
++ os=`echo $os | sed 's/[^-]*-//'`
++ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
++ exit 1
++ ;;
++esac
++else
++
++# Here we handle the default operating systems that come with various machines.
++# The value should be what the vendor currently ships out the door with their
++# machine or put another way, the most popular os provided with the machine.
++
++# Note that if you're going to try to match "-MANUFACTURER" here (say,
++# "-sun"), then you have to tell the case statement up towards the top
++# that MANUFACTURER isn't an operating system. Otherwise, code above
++# will signal an error saying that MANUFACTURER isn't an operating
++# system, and we'll never get to this point.
++
++case $basic_machine in
++ score-*)
++ os=-elf
++ ;;
++ spu-*)
++ os=-elf
++ ;;
++ *-acorn)
++ os=-riscix1.2
++ ;;
++ arm*-rebel)
++ os=-linux
++ ;;
++ arm*-semi)
++ os=-aout
++ ;;
++ c4x-* | tic4x-*)
++ os=-coff
++ ;;
++ tic54x-*)
++ os=-coff
++ ;;
++ tic55x-*)
++ os=-coff
++ ;;
++ tic6x-*)
++ os=-coff
++ ;;
++ # This must come before the *-dec entry.
++ pdp10-*)
++ os=-tops20
++ ;;
++ pdp11-*)
++ os=-none
++ ;;
++ *-dec | vax-*)
++ os=-ultrix4.2
++ ;;
++ m68*-apollo)
++ os=-domain
++ ;;
++ i386-sun)
++ os=-sunos4.0.2
++ ;;
++ m68000-sun)
++ os=-sunos3
++ ;;
++ m68*-cisco)
++ os=-aout
++ ;;
++ mep-*)
++ os=-elf
++ ;;
++ mips*-cisco)
++ os=-elf
++ ;;
++ mips*-*)
++ os=-elf
++ ;;
++ or32-*)
++ os=-coff
++ ;;
++ *-tti) # must be before sparc entry or we get the wrong os.
++ os=-sysv3
++ ;;
++ sparc-* | *-sun)
++ os=-sunos4.1.1
++ ;;
++ *-be)
++ os=-beos
++ ;;
++ *-haiku)
++ os=-haiku
++ ;;
++ *-ibm)
++ os=-aix
++ ;;
++ *-knuth)
++ os=-mmixware
++ ;;
++ *-wec)
++ os=-proelf
++ ;;
++ *-winbond)
++ os=-proelf
++ ;;
++ *-oki)
++ os=-proelf
++ ;;
++ *-hp)
++ os=-hpux
++ ;;
++ *-hitachi)
++ os=-hiux
++ ;;
++ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
++ os=-sysv
++ ;;
++ *-cbm)
++ os=-amigaos
++ ;;
++ *-dg)
++ os=-dgux
++ ;;
++ *-dolphin)
++ os=-sysv3
++ ;;
++ m68k-ccur)
++ os=-rtu
++ ;;
++ m88k-omron*)
++ os=-luna
++ ;;
++ *-next )
++ os=-nextstep
++ ;;
++ *-sequent)
++ os=-ptx
++ ;;
++ *-crds)
++ os=-unos
++ ;;
++ *-ns)
++ os=-genix
++ ;;
++ i370-*)
++ os=-mvs
++ ;;
++ *-next)
++ os=-nextstep3
++ ;;
++ *-gould)
++ os=-sysv
++ ;;
++ *-highlevel)
++ os=-bsd
++ ;;
++ *-encore)
++ os=-bsd
++ ;;
++ *-sgi)
++ os=-irix
++ ;;
++ *-siemens)
++ os=-sysv4
++ ;;
++ *-masscomp)
++ os=-rtu
++ ;;
++ f30[01]-fujitsu | f700-fujitsu)
++ os=-uxpv
++ ;;
++ *-rom68k)
++ os=-coff
++ ;;
++ *-*bug)
++ os=-coff
++ ;;
++ *-apple)
++ os=-macos
++ ;;
++ *-atari*)
++ os=-mint
++ ;;
++ *)
++ os=-none
++ ;;
++esac
++fi
++
++# Here we handle the case where we know the os, and the CPU type, but not the
++# manufacturer. We pick the logical manufacturer.
++vendor=unknown
++case $basic_machine in
++ *-unknown)
++ case $os in
++ -riscix*)
++ vendor=acorn
++ ;;
++ -sunos*)
++ vendor=sun
++ ;;
++ -cnk*|-aix*)
++ vendor=ibm
++ ;;
++ -beos*)
++ vendor=be
++ ;;
++ -hpux*)
++ vendor=hp
++ ;;
++ -mpeix*)
++ vendor=hp
++ ;;
++ -hiux*)
++ vendor=hitachi
++ ;;
++ -unos*)
++ vendor=crds
++ ;;
++ -dgux*)
++ vendor=dg
++ ;;
++ -luna*)
++ vendor=omron
++ ;;
++ -genix*)
++ vendor=ns
++ ;;
++ -mvs* | -opened*)
++ vendor=ibm
++ ;;
++ -os400*)
++ vendor=ibm
++ ;;
++ -ptx*)
++ vendor=sequent
++ ;;
++ -tpf*)
++ vendor=ibm
++ ;;
++ -vxsim* | -vxworks* | -windiss*)
++ vendor=wrs
++ ;;
++ -aux*)
++ vendor=apple
++ ;;
++ -hms*)
++ vendor=hitachi
++ ;;
++ -mpw* | -macos*)
++ vendor=apple
++ ;;
++ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
++ vendor=atari
++ ;;
++ -vos*)
++ vendor=stratus
++ ;;
++ esac
++ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
++ ;;
++esac
++
++echo $basic_machine$os
++exit
++
++# Local variables:
++# eval: (add-hook 'write-file-hooks 'time-stamp)
++# time-stamp-start: "timestamp='"
++# time-stamp-format: "%:y-%02m-%02d"
++# time-stamp-end: "'"
++# End:
+--- openjade1.3-1.3.2.orig/libtool
++++ openjade1.3-1.3.2/libtool
+@@ -0,0 +1,5229 @@
++#! /bin/bash
++
++# libtool - Provide generalized library-building support services.
++# Generated automatically by (GNU openjade 1.3.2)
++# NOTE: Changes made to this file will be lost: look at ltmain.sh.
++#
++# Copyright (C) 1996-2000 Free Software Foundation, Inc.
++# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
++#
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful, but
++# WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++# General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++#
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++# Sed that helps us avoid accidentally triggering echo(1) options like -n.
++Xsed="sed -e s/^X//"
++
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
++
++# ### BEGIN LIBTOOL CONFIG
++
++# Libtool was configured on host blackbox:
++
++# Shell to use when invoking shell scripts.
++SHELL="/bin/bash"
++
++# Whether or not to build shared libraries.
++build_libtool_libs=no
++
++# Whether or not to add -lc for building shared libraries.
++build_libtool_need_lc=yes
++
++# Whether or not to build static libraries.
++build_old_libs=yes
++
++# Whether or not to optimize for fast installation.
++fast_install=needless
++
++# The host system.
++host_alias=
++host=x86_64-unknown-linux-gnu
++
++# An echo program that does not interpret backslashes.
++echo="echo"
++
++# The archiver.
++AR="ar"
++AR_FLAGS="cru"
++
++# The default C compiler.
++CC="gcc"
++
++# Is the compiler the GNU C compiler?
++with_gcc=yes
++
++# The linker used to build libraries.
++LD="/usr/bin/ld"
++
++# Whether we need hard or soft links.
++LN_S="ln -s"
++
++# A BSD-compatible nm program.
++NM="/usr/bin/nm -B"
++
++# A symbol stripping program
++STRIP=strip
++
++# Used to examine libraries when file_magic_cmd begins "file"
++MAGIC_CMD=/usr/bin/file
++
++# Used on cygwin: DLL creation program.
++DLLTOOL="dlltool"
++
++# Used on cygwin: object dumper.
++OBJDUMP="objdump"
++
++# Used on cygwin: assembler.
++AS="as"
++
++# The name of the directory that contains temporary libtool files.
++objdir=.libs
++
++# How to create reloadable object files.
++reload_flag=" -r"
++reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs"
++
++# How to pass a linker flag through the compiler.
++wl="-Wl,"
++
++# Object file suffix (normally "o").
++objext="o"
++
++# Old archive suffix (normally "a").
++libext="a"
++
++# Executable file suffix (normally "").
++exeext=""
++
++# Additional compiler flags for building library objects.
++pic_flag=" -fPIC"
++pic_mode=default
++
++# Does compiler simultaneously support -c and -o options?
++compiler_c_o="no"
++
++# Can we write directly to a .lo ?
++compiler_o_lo="no"
++
++# Must we lock files when doing compilation ?
++need_locks="yes"
++
++# Do we need the lib prefix for modules?
++need_lib_prefix=no
++
++# Do we need a version for libraries?
++need_version=no
++
++# Whether dlopen is supported.
++dlopen_support=unknown
++
++# Whether dlopen of programs is supported.
++dlopen_self=unknown
++
++# Whether dlopen of statically linked programs is supported.
++dlopen_self_static=unknown
++
++# Compiler flag to prevent dynamic linking.
++link_static_flag="-static"
++
++# Compiler flag to turn off builtin functions.
++no_builtin_flag=" -fno-builtin -fno-rtti -fno-exceptions"
++
++# Compiler flag to allow reflexive dlopens.
++export_dynamic_flag_spec="\${wl}--export-dynamic"
++
++# Compiler flag to generate shared objects directly from archives.
++whole_archive_flag_spec="\${wl}--whole-archive\$convenience \${wl}--no-whole-archive"
++
++# Compiler flag to generate thread-safe objects.
++thread_safe_flag_spec=""
++
++# Library versioning type.
++version_type=linux
++
++# Format of library name prefix.
++libname_spec="lib\$name"
++
++# List of archive names. First name is the real one, the rest are links.
++# The last name is the one that the linker finds with -lNAME.
++library_names_spec="\${libname}\${release}.so\$versuffix \${libname}\${release}.so\$major \$libname.so"
++
++# The coded name of the library, if different from the real name.
++soname_spec="\${libname}\${release}.so\$major"
++
++# Commands used to build and install an old-style archive.
++RANLIB="ranlib"
++old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs\$old_deplibs~\$RANLIB \$oldlib"
++old_postinstall_cmds="\$RANLIB \$oldlib~chmod 644 \$oldlib"
++old_postuninstall_cmds=""
++
++# Create an old-style archive from a shared archive.
++old_archive_from_new_cmds=""
++
++# Create a temporary old-style archive to link instead of a shared archive.
++old_archive_from_expsyms_cmds=""
++
++# Commands used to build and install a shared archive.
++archive_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname -o \$lib"
++archive_expsym_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname \${wl}-retain-symbols-file \$wl\$export_symbols -o \$lib"
++postinstall_cmds=""
++postuninstall_cmds=""
++
++# Commands to strip libraries.
++old_striplib="strip --strip-debug"
++striplib="strip --strip-unneeded"
++
++# Method to check whether dependent libraries are shared objects.
++deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )"
++
++# Command to use when deplibs_check_method == file_magic.
++file_magic_cmd="\$MAGIC_CMD"
++
++# Flag that allows shared libraries with undefined symbols to be built.
++allow_undefined_flag=""
++
++# Flag that forces no undefined symbols.
++no_undefined_flag=""
++
++# Commands used to finish a libtool library installation in a directory.
++finish_cmds="PATH=\\\"\\\$PATH:/sbin\\\" ldconfig -n \$libdir"
++
++# Same as above, but a single script fragment to be evaled but not shown.
++finish_eval=""
++
++# Take the output of nm and produce a listing of raw symbols and C names.
++global_symbol_pipe="sed -n -e 's/^.*[ ]\\([ABCDGISTW][ABCDGISTW]*\\)[ ][ ]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2\\3 \\3/p'"
++
++# Transform the output of nm in a proper C declaration
++global_symbol_to_cdecl="sed -n -e 's/^. .* \\(.*\\)\$/extern char \\1;/p'"
++
++# This is the shared library runtime path variable.
++runpath_var=LD_RUN_PATH
++
++# This is the shared library path variable.
++shlibpath_var=LD_LIBRARY_PATH
++
++# Is shlibpath searched before the hard-coded library search path?
++shlibpath_overrides_runpath=no
++
++# How to hardcode a shared library path into an executable.
++hardcode_action=immediate
++
++# Whether we should hardcode library paths into libraries.
++hardcode_into_libs=yes
++
++# Flag to hardcode $libdir into a binary during linking.
++# This must work even if $libdir does not exist.
++hardcode_libdir_flag_spec="\${wl}--rpath \${wl}\$libdir"
++
++# Whether we need a single -rpath flag with a separated argument.
++hardcode_libdir_separator=""
++
++# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
++# resulting binary.
++hardcode_direct=no
++
++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
++# resulting binary.
++hardcode_minus_L=no
++
++# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
++# the resulting binary.
++hardcode_shlibpath_var=unsupported
++
++# Variables whose values should be saved in libtool wrapper scripts and
++# restored at relink time.
++variables_saved_for_relink="PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
++
++# Whether libtool must link a program against all its dependency libraries.
++link_all_deplibs=unknown
++
++# Compile-time system search path for libraries
++sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++
++# Run-time system search path for libraries
++sys_lib_dlsearch_path_spec="/lib /usr/lib"
++
++# Fix the shell variable $srcfile for the compiler.
++fix_srcfile_path=""
++
++# Set to yes if exported symbols are required.
++always_export_symbols=no
++
++# The commands to list exported symbols.
++export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | sed 's/.* //' | sort | uniq > \$export_symbols"
++
++# The commands to extract the exported symbol list from a shared archive.
++extract_expsyms_cmds=""
++
++# Symbols that should not be listed in the preloaded symbols.
++exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
++
++# Symbols that must always be exported.
++include_expsyms=""
++
++# ### END LIBTOOL CONFIG
++
++# ltmain.sh - Provide generalized library-building support services.
++# NOTE: Changing this file will not affect anything until you rerun configure.
++#
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
++# Free Software Foundation, Inc.
++# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
++#
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful, but
++# WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++# General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++#
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++# Check that we have a working $echo.
++if test "X$1" = X--no-reexec; then
++ # Discard the --no-reexec flag, and continue.
++ shift
++elif test "X$1" = X--fallback-echo; then
++ # Avoid inline document here, it may be left over
++ :
++elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
++ # Yippee, $echo works!
++ :
++else
++ # Restart under the correct shell, and then maybe $echo will work.
++ exec $SHELL "$0" --no-reexec ${1+"$@"}
++fi
++
++if test "X$1" = X--fallback-echo; then
++ # used as fallback echo
++ shift
++ cat <<EOF
++$*
++EOF
++ exit 0
++fi
++
++# The name of this program.
++progname=`$echo "$0" | sed 's%^.*/%%'`
++modename="$progname"
++
++# Constants.
++PROGRAM=ltmain.sh
++PACKAGE=libtool
++VERSION=1.4
++TIMESTAMP=" (1.920 2001/04/24 23:26:18)"
++
++default_mode=
++help="Try \`$progname --help' for more information."
++magic="%%%MAGIC variable%%%"
++mkdir="mkdir"
++mv="mv -f"
++rm="rm -f"
++
++# Sed substitution that helps us do robust quoting. It backslashifies
++# metacharacters that are still active within double-quoted strings.
++Xsed='sed -e 1s/^X//'
++sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
++SP2NL='tr \040 \012'
++NL2SP='tr \015\012 \040\040'
++
++# NLS nuisances.
++# Only set LANG and LC_ALL to C if already set.
++# These must not be set unconditionally because not all systems understand
++# e.g. LANG=C (notably SCO).
++# We save the old values to restore during execute mode.
++if test "${LC_ALL+set}" = set; then
++ save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
++fi
++if test "${LANG+set}" = set; then
++ save_LANG="$LANG"; LANG=C; export LANG
++fi
++
++if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
++ echo "$modename: not configured to build any kind of library" 1>&2
++ echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
++ exit 1
++fi
++
++# Global variables.
++mode=$default_mode
++nonopt=
++prev=
++prevopt=
++run=
++show="$echo"
++show_help=
++execute_dlfiles=
++lo2o="s/\\.lo\$/.${objext}/"
++o2lo="s/\\.${objext}\$/.lo/"
++
++# Parse our command line options once, thoroughly.
++while test $# -gt 0
++do
++ arg="$1"
++ shift
++
++ case $arg in
++ -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
++ *) optarg= ;;
++ esac
++
++ # If the previous option needs an argument, assign it.
++ if test -n "$prev"; then
++ case $prev in
++ execute_dlfiles)
++ execute_dlfiles="$execute_dlfiles $arg"
++ ;;
++ *)
++ eval "$prev=\$arg"
++ ;;
++ esac
++
++ prev=
++ prevopt=
++ continue
++ fi
++
++ # Have we seen a non-optional argument yet?
++ case $arg in
++ --help)
++ show_help=yes
++ ;;
++
++ --version)
++ echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
++ exit 0
++ ;;
++
++ --config)
++ sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
++ exit 0
++ ;;
++
++ --debug)
++ echo "$progname: enabling shell trace mode"
++ set -x
++ ;;
++
++ --dry-run | -n)
++ run=:
++ ;;
++
++ --features)
++ echo "host: $host"
++ if test "$build_libtool_libs" = yes; then
++ echo "enable shared libraries"
++ else
++ echo "disable shared libraries"
++ fi
++ if test "$build_old_libs" = yes; then
++ echo "enable static libraries"
++ else
++ echo "disable static libraries"
++ fi
++ exit 0
++ ;;
++
++ --finish) mode="finish" ;;
++
++ --mode) prevopt="--mode" prev=mode ;;
++ --mode=*) mode="$optarg" ;;
++
++ --quiet | --silent)
++ show=:
++ ;;
++
++ -dlopen)
++ prevopt="-dlopen"
++ prev=execute_dlfiles
++ ;;
++
++ -*)
++ $echo "$modename: unrecognized option \`$arg'" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ ;;
++
++ *)
++ nonopt="$arg"
++ break
++ ;;
++ esac
++done
++
++if test -n "$prevopt"; then
++ $echo "$modename: option \`$prevopt' requires an argument" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++fi
++
++if test -z "$show_help"; then
++
++ # Infer the operation mode.
++ if test -z "$mode"; then
++ case $nonopt in
++ *cc | *++ | gcc* | *-gcc*)
++ mode=link
++ for arg
++ do
++ case $arg in
++ -c)
++ mode=compile
++ break
++ ;;
++ esac
++ done
++ ;;
++ *db | *dbx | *strace | *truss)
++ mode=execute
++ ;;
++ *install*|cp|mv)
++ mode=install
++ ;;
++ *rm)
++ mode=uninstall
++ ;;
++ *)
++ # If we have no mode, but dlfiles were specified, then do execute mode.
++ test -n "$execute_dlfiles" && mode=execute
++
++ # Just use the default operation mode.
++ if test -z "$mode"; then
++ if test -n "$nonopt"; then
++ $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
++ else
++ $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
++ fi
++ fi
++ ;;
++ esac
++ fi
++
++ # Only execute mode is allowed to have -dlopen flags.
++ if test -n "$execute_dlfiles" && test "$mode" != execute; then
++ $echo "$modename: unrecognized option \`-dlopen'" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ # Change the help message to a mode-specific one.
++ generic_help="$help"
++ help="Try \`$modename --help --mode=$mode' for more information."
++
++ # These modes are in order of execution frequency so that they run quickly.
++ case $mode in
++ # libtool compile mode
++ compile)
++ modename="$modename: compile"
++ # Get the compilation command and the source file.
++ base_compile=
++ prev=
++ lastarg=
++ srcfile="$nonopt"
++ suppress_output=
++
++ user_target=no
++ for arg
++ do
++ case $prev in
++ "") ;;
++ xcompiler)
++ # Aesthetically quote the previous argument.
++ prev=
++ lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
++
++ case $arg in
++ # Double-quote args containing other shell metacharacters.
++ # Many Bourne shells cannot handle close brackets correctly
++ # in scan sets, so we specify it separately.
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ arg="\"$arg\""
++ ;;
++ esac
++
++ # Add the previous argument to base_compile.
++ if test -z "$base_compile"; then
++ base_compile="$lastarg"
++ else
++ base_compile="$base_compile $lastarg"
++ fi
++ continue
++ ;;
++ esac
++
++ # Accept any command-line options.
++ case $arg in
++ -o)
++ if test "$user_target" != "no"; then
++ $echo "$modename: you cannot specify \`-o' more than once" 1>&2
++ exit 1
++ fi
++ user_target=next
++ ;;
++
++ -static)
++ build_old_libs=yes
++ continue
++ ;;
++
++ -prefer-pic)
++ pic_mode=yes
++ continue
++ ;;
++
++ -prefer-non-pic)
++ pic_mode=no
++ continue
++ ;;
++
++ -Xcompiler)
++ prev=xcompiler
++ continue
++ ;;
++
++ -Wc,*)
++ args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
++ lastarg=
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
++ for arg in $args; do
++ IFS="$save_ifs"
++
++ # Double-quote args containing other shell metacharacters.
++ # Many Bourne shells cannot handle close brackets correctly
++ # in scan sets, so we specify it separately.
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ arg="\"$arg\""
++ ;;
++ esac
++ lastarg="$lastarg $arg"
++ done
++ IFS="$save_ifs"
++ lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
++
++ # Add the arguments to base_compile.
++ if test -z "$base_compile"; then
++ base_compile="$lastarg"
++ else
++ base_compile="$base_compile $lastarg"
++ fi
++ continue
++ ;;
++ esac
++
++ case $user_target in
++ next)
++ # The next one is the -o target name
++ user_target=yes
++ continue
++ ;;
++ yes)
++ # We got the output file
++ user_target=set
++ libobj="$arg"
++ continue
++ ;;
++ esac
++
++ # Accept the current argument as the source file.
++ lastarg="$srcfile"
++ srcfile="$arg"
++
++ # Aesthetically quote the previous argument.
++
++ # Backslashify any backslashes, double quotes, and dollar signs.
++ # These are the only characters that are still specially
++ # interpreted inside of double-quoted scrings.
++ lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
++
++ # Double-quote args containing other shell metacharacters.
++ # Many Bourne shells cannot handle close brackets correctly
++ # in scan sets, so we specify it separately.
++ case $lastarg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ lastarg="\"$lastarg\""
++ ;;
++ esac
++
++ # Add the previous argument to base_compile.
++ if test -z "$base_compile"; then
++ base_compile="$lastarg"
++ else
++ base_compile="$base_compile $lastarg"
++ fi
++ done
++
++ case $user_target in
++ set)
++ ;;
++ no)
++ # Get the name of the library object.
++ libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
++ ;;
++ *)
++ $echo "$modename: you must specify a target with \`-o'" 1>&2
++ exit 1
++ ;;
++ esac
++
++ # Recognize several different file suffixes.
++ # If the user specifies -o file.o, it is replaced with file.lo
++ xform='[cCFSfmso]'
++ case $libobj in
++ *.ada) xform=ada ;;
++ *.adb) xform=adb ;;
++ *.ads) xform=ads ;;
++ *.asm) xform=asm ;;
++ *.c++) xform=c++ ;;
++ *.cc) xform=cc ;;
++ *.cpp) xform=cpp ;;
++ *.cxx) xform=cxx ;;
++ *.f90) xform=f90 ;;
++ *.for) xform=for ;;
++ esac
++
++ libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
++
++ case $libobj in
++ *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
++ *)
++ $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
++ exit 1
++ ;;
++ esac
++
++ if test -z "$base_compile"; then
++ $echo "$modename: you must specify a compilation command" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ # Delete any leftover library objects.
++ if test "$build_old_libs" = yes; then
++ removelist="$obj $libobj"
++ else
++ removelist="$libobj"
++ fi
++
++ $run $rm $removelist
++ trap "$run $rm $removelist; exit 1" 1 2 15
++
++ # On Cygwin there's no "real" PIC flag so we must build both object types
++ case $host_os in
++ cygwin* | mingw* | pw32* | os2*)
++ pic_mode=default
++ ;;
++ esac
++ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
++ # non-PIC code in shared libraries is not supported
++ pic_mode=default
++ fi
++
++ # Calculate the filename of the output object if compiler does
++ # not support -o with -c
++ if test "$compiler_c_o" = no; then
++ output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
++ lockfile="$output_obj.lock"
++ removelist="$removelist $output_obj $lockfile"
++ trap "$run $rm $removelist; exit 1" 1 2 15
++ else
++ need_locks=no
++ lockfile=
++ fi
++
++ # Lock this critical section if it is needed
++ # We use this script file to make the link, it avoids creating a new file
++ if test "$need_locks" = yes; then
++ until $run ln "$0" "$lockfile" 2>/dev/null; do
++ $show "Waiting for $lockfile to be removed"
++ sleep 2
++ done
++ elif test "$need_locks" = warn; then
++ if test -f "$lockfile"; then
++ echo "\
++*** ERROR, $lockfile exists and contains:
++`cat $lockfile 2>/dev/null`
++
++This indicates that another process is trying to use the same
++temporary object file, and libtool could not work around it because
++your compiler does not support \`-c' and \`-o' together. If you
++repeat this compilation, it may succeed, by chance, but you had better
++avoid parallel builds (make -j) in this platform, or get a better
++compiler."
++
++ $run $rm $removelist
++ exit 1
++ fi
++ echo $srcfile > "$lockfile"
++ fi
++
++ if test -n "$fix_srcfile_path"; then
++ eval srcfile=\"$fix_srcfile_path\"
++ fi
++
++ # Only build a PIC object if we are building libtool libraries.
++ if test "$build_libtool_libs" = yes; then
++ # Without this assignment, base_compile gets emptied.
++ fbsd_hideous_sh_bug=$base_compile
++
++ if test "$pic_mode" != no; then
++ # All platforms use -DPIC, to notify preprocessed assembler code.
++ command="$base_compile $srcfile $pic_flag -DPIC"
++ else
++ # Don't build PIC code
++ command="$base_compile $srcfile"
++ fi
++ if test "$build_old_libs" = yes; then
++ lo_libobj="$libobj"
++ dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
++ if test "X$dir" = "X$libobj"; then
++ dir="$objdir"
++ else
++ dir="$dir/$objdir"
++ fi
++ libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
++
++ if test -d "$dir"; then
++ $show "$rm $libobj"
++ $run $rm $libobj
++ else
++ $show "$mkdir $dir"
++ $run $mkdir $dir
++ status=$?
++ if test $status -ne 0 && test ! -d $dir; then
++ exit $status
++ fi
++ fi
++ fi
++ if test "$compiler_o_lo" = yes; then
++ output_obj="$libobj"
++ command="$command -o $output_obj"
++ elif test "$compiler_c_o" = yes; then
++ output_obj="$obj"
++ command="$command -o $output_obj"
++ fi
++
++ $run $rm "$output_obj"
++ $show "$command"
++ if $run eval "$command"; then :
++ else
++ test -n "$output_obj" && $run $rm $removelist
++ exit 1
++ fi
++
++ if test "$need_locks" = warn &&
++ test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
++ echo "\
++*** ERROR, $lockfile contains:
++`cat $lockfile 2>/dev/null`
++
++but it should contain:
++$srcfile
++
++This indicates that another process is trying to use the same
++temporary object file, and libtool could not work around it because
++your compiler does not support \`-c' and \`-o' together. If you
++repeat this compilation, it may succeed, by chance, but you had better
++avoid parallel builds (make -j) in this platform, or get a better
++compiler."
++
++ $run $rm $removelist
++ exit 1
++ fi
++
++ # Just move the object if needed, then go on to compile the next one
++ if test x"$output_obj" != x"$libobj"; then
++ $show "$mv $output_obj $libobj"
++ if $run $mv $output_obj $libobj; then :
++ else
++ error=$?
++ $run $rm $removelist
++ exit $error
++ fi
++ fi
++
++ # If we have no pic_flag, then copy the object into place and finish.
++ if (test -z "$pic_flag" || test "$pic_mode" != default) &&
++ test "$build_old_libs" = yes; then
++ # Rename the .lo from within objdir to obj
++ if test -f $obj; then
++ $show $rm $obj
++ $run $rm $obj
++ fi
++
++ $show "$mv $libobj $obj"
++ if $run $mv $libobj $obj; then :
++ else
++ error=$?
++ $run $rm $removelist
++ exit $error
++ fi
++
++ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
++ if test "X$xdir" = "X$obj"; then
++ xdir="."
++ else
++ xdir="$xdir"
++ fi
++ baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
++ libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
++ # Now arrange that obj and lo_libobj become the same file
++ $show "(cd $xdir && $LN_S $baseobj $libobj)"
++ if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
++ exit 0
++ else
++ error=$?
++ $run $rm $removelist
++ exit $error
++ fi
++ fi
++
++ # Allow error messages only from the first compilation.
++ suppress_output=' >/dev/null 2>&1'
++ fi
++
++ # Only build a position-dependent object if we build old libraries.
++ if test "$build_old_libs" = yes; then
++ if test "$pic_mode" != yes; then
++ # Don't build PIC code
++ command="$base_compile $srcfile"
++ else
++ # All platforms use -DPIC, to notify preprocessed assembler code.
++ command="$base_compile $srcfile $pic_flag -DPIC"
++ fi
++ if test "$compiler_c_o" = yes; then
++ command="$command -o $obj"
++ output_obj="$obj"
++ fi
++
++ # Suppress compiler output if we already did a PIC compilation.
++ command="$command$suppress_output"
++ $run $rm "$output_obj"
++ $show "$command"
++ if $run eval "$command"; then :
++ else
++ $run $rm $removelist
++ exit 1
++ fi
++
++ if test "$need_locks" = warn &&
++ test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
++ echo "\
++*** ERROR, $lockfile contains:
++`cat $lockfile 2>/dev/null`
++
++but it should contain:
++$srcfile
++
++This indicates that another process is trying to use the same
++temporary object file, and libtool could not work around it because
++your compiler does not support \`-c' and \`-o' together. If you
++repeat this compilation, it may succeed, by chance, but you had better
++avoid parallel builds (make -j) in this platform, or get a better
++compiler."
++
++ $run $rm $removelist
++ exit 1
++ fi
++
++ # Just move the object if needed
++ if test x"$output_obj" != x"$obj"; then
++ $show "$mv $output_obj $obj"
++ if $run $mv $output_obj $obj; then :
++ else
++ error=$?
++ $run $rm $removelist
++ exit $error
++ fi
++ fi
++
++ # Create an invalid libtool object if no PIC, so that we do not
++ # accidentally link it into a program.
++ if test "$build_libtool_libs" != yes; then
++ $show "echo timestamp > $libobj"
++ $run eval "echo timestamp > \$libobj" || exit $?
++ else
++ # Move the .lo from within objdir
++ $show "$mv $libobj $lo_libobj"
++ if $run $mv $libobj $lo_libobj; then :
++ else
++ error=$?
++ $run $rm $removelist
++ exit $error
++ fi
++ fi
++ fi
++
++ # Unlock the critical section if it was locked
++ if test "$need_locks" != no; then
++ $run $rm "$lockfile"
++ fi
++
++ exit 0
++ ;;
++
++ # libtool link mode
++ link | relink)
++ modename="$modename: link"
++ case $host in
++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++ # It is impossible to link a dll without this setting, and
++ # we shouldn't force the makefile maintainer to figure out
++ # which system we are compiling for in order to pass an extra
++ # flag for every libtool invokation.
++ # allow_undefined=no
++
++ # FIXME: Unfortunately, there are problems with the above when trying
++ # to make a dll which has undefined symbols, in which case not
++ # even a static library is built. For now, we need to specify
++ # -no-undefined on the libtool link line when we can be certain
++ # that all symbols are satisfied, otherwise we get a static library.
++ allow_undefined=yes
++ ;;
++ *)
++ allow_undefined=yes
++ ;;
++ esac
++ libtool_args="$nonopt"
++ compile_command="$nonopt"
++ finalize_command="$nonopt"
++
++ compile_rpath=
++ finalize_rpath=
++ compile_shlibpath=
++ finalize_shlibpath=
++ convenience=
++ old_convenience=
++ deplibs=
++ old_deplibs=
++ compiler_flags=
++ linker_flags=
++ dllsearchpath=
++ lib_search_path=`pwd`
++
++ avoid_version=no
++ dlfiles=
++ dlprefiles=
++ dlself=no
++ export_dynamic=no
++ export_symbols=
++ export_symbols_regex=
++ generated=
++ libobjs=
++ ltlibs=
++ module=no
++ no_install=no
++ objs=
++ prefer_static_libs=no
++ preload=no
++ prev=
++ prevarg=
++ release=
++ rpath=
++ xrpath=
++ perm_rpath=
++ temp_rpath=
++ thread_safe=no
++ vinfo=
++
++ # We need to know -static, to get the right output filenames.
++ for arg
++ do
++ case $arg in
++ -all-static | -static)
++ if test "X$arg" = "X-all-static"; then
++ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
++ $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
++ fi
++ if test -n "$link_static_flag"; then
++ dlopen_self=$dlopen_self_static
++ fi
++ else
++ if test -z "$pic_flag" && test -n "$link_static_flag"; then
++ dlopen_self=$dlopen_self_static
++ fi
++ fi
++ build_libtool_libs=no
++ build_old_libs=yes
++ prefer_static_libs=yes
++ break
++ ;;
++ esac
++ done
++
++ # See if our shared archives depend on static archives.
++ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
++
++ # Go through the arguments, transforming them on the way.
++ while test $# -gt 0; do
++ arg="$1"
++ shift
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
++ ;;
++ *) qarg=$arg ;;
++ esac
++ libtool_args="$libtool_args $qarg"
++
++ # If the previous option needs an argument, assign it.
++ if test -n "$prev"; then
++ case $prev in
++ output)
++ compile_command="$compile_command @OUTPUT@"
++ finalize_command="$finalize_command @OUTPUT@"
++ ;;
++ esac
++
++ case $prev in
++ dlfiles|dlprefiles)
++ if test "$preload" = no; then
++ # Add the symbol object into the linking commands.
++ compile_command="$compile_command @SYMFILE@"
++ finalize_command="$finalize_command @SYMFILE@"
++ preload=yes
++ fi
++ case $arg in
++ *.la | *.lo) ;; # We handle these cases below.
++ force)
++ if test "$dlself" = no; then
++ dlself=needless
++ export_dynamic=yes
++ fi
++ prev=
++ continue
++ ;;
++ self)
++ if test "$prev" = dlprefiles; then
++ dlself=yes
++ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
++ dlself=yes
++ else
++ dlself=needless
++ export_dynamic=yes
++ fi
++ prev=
++ continue
++ ;;
++ *)
++ if test "$prev" = dlfiles; then
++ dlfiles="$dlfiles $arg"
++ else
++ dlprefiles="$dlprefiles $arg"
++ fi
++ prev=
++ continue
++ ;;
++ esac
++ ;;
++ expsyms)
++ export_symbols="$arg"
++ if test ! -f "$arg"; then
++ $echo "$modename: symbol file \`$arg' does not exist"
++ exit 1
++ fi
++ prev=
++ continue
++ ;;
++ expsyms_regex)
++ export_symbols_regex="$arg"
++ prev=
++ continue
++ ;;
++ release)
++ release="-$arg"
++ prev=
++ continue
++ ;;
++ rpath | xrpath)
++ # We need an absolute path.
++ case $arg in
++ [\\/]* | [A-Za-z]:[\\/]*) ;;
++ *)
++ $echo "$modename: only absolute run-paths are allowed" 1>&2
++ exit 1
++ ;;
++ esac
++ if test "$prev" = rpath; then
++ case "$rpath " in
++ *" $arg "*) ;;
++ *) rpath="$rpath $arg" ;;
++ esac
++ else
++ case "$xrpath " in
++ *" $arg "*) ;;
++ *) xrpath="$xrpath $arg" ;;
++ esac
++ fi
++ prev=
++ continue
++ ;;
++ xcompiler)
++ compiler_flags="$compiler_flags $qarg"
++ prev=
++ compile_command="$compile_command $qarg"
++ finalize_command="$finalize_command $qarg"
++ continue
++ ;;
++ xlinker)
++ linker_flags="$linker_flags $qarg"
++ compiler_flags="$compiler_flags $wl$qarg"
++ prev=
++ compile_command="$compile_command $wl$qarg"
++ finalize_command="$finalize_command $wl$qarg"
++ continue
++ ;;
++ *)
++ eval "$prev=\"\$arg\""
++ prev=
++ continue
++ ;;
++ esac
++ fi # test -n $prev
++
++ prevarg="$arg"
++
++ case $arg in
++ -all-static)
++ if test -n "$link_static_flag"; then
++ compile_command="$compile_command $link_static_flag"
++ finalize_command="$finalize_command $link_static_flag"
++ fi
++ continue
++ ;;
++
++ -allow-undefined)
++ # FIXME: remove this flag sometime in the future.
++ $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
++ continue
++ ;;
++
++ -avoid-version)
++ avoid_version=yes
++ continue
++ ;;
++
++ -dlopen)
++ prev=dlfiles
++ continue
++ ;;
++
++ -dlpreopen)
++ prev=dlprefiles
++ continue
++ ;;
++
++ -export-dynamic)
++ export_dynamic=yes
++ continue
++ ;;
++
++ -export-symbols | -export-symbols-regex)
++ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
++ $echo "$modename: more than one -exported-symbols argument is not allowed"
++ exit 1
++ fi
++ if test "X$arg" = "X-export-symbols"; then
++ prev=expsyms
++ else
++ prev=expsyms_regex
++ fi
++ continue
++ ;;
++
++ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
++ # so, if we see these flags be careful not to treat them like -L
++ -L[A-Z][A-Z]*:*)
++ case $with_gcc/$host in
++ no/*-*-irix*)
++ compile_command="$compile_command $arg"
++ finalize_command="$finalize_command $arg"
++ ;;
++ esac
++ continue
++ ;;
++
++ -L*)
++ dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
++ # We need an absolute path.
++ case $dir in
++ [\\/]* | [A-Za-z]:[\\/]*) ;;
++ *)
++ absdir=`cd "$dir" && pwd`
++ if test -z "$absdir"; then
++ $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
++ exit 1
++ fi
++ dir="$absdir"
++ ;;
++ esac
++ case "$deplibs " in
++ *" -L$dir "*) ;;
++ *)
++ deplibs="$deplibs -L$dir"
++ lib_search_path="$lib_search_path $dir"
++ ;;
++ esac
++ case $host in
++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++ case :$dllsearchpath: in
++ *":$dir:"*) ;;
++ *) dllsearchpath="$dllsearchpath:$dir";;
++ esac
++ ;;
++ esac
++ continue
++ ;;
++
++ -l*)
++ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
++ case $host in
++ *-*-cygwin* | *-*-pw32* | *-*-beos*)
++ # These systems don't actually have a C or math library (as such)
++ continue
++ ;;
++ *-*-mingw* | *-*-os2*)
++ # These systems don't actually have a C library (as such)
++ test "X$arg" = "X-lc" && continue
++ ;;
++ esac
++ fi
++ deplibs="$deplibs $arg"
++ continue
++ ;;
++
++ -module)
++ module=yes
++ continue
++ ;;
++
++ -no-fast-install)
++ fast_install=no
++ continue
++ ;;
++
++ -no-install)
++ case $host in
++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++ # The PATH hackery in wrapper scripts is required on Windows
++ # in order for the loader to find any dlls it needs.
++ $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
++ $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
++ fast_install=no
++ ;;
++ *) no_install=yes ;;
++ esac
++ continue
++ ;;
++
++ -no-undefined)
++ allow_undefined=no
++ continue
++ ;;
++
++ -o) prev=output ;;
++
++ -release)
++ prev=release
++ continue
++ ;;
++
++ -rpath)
++ prev=rpath
++ continue
++ ;;
++
++ -R)
++ prev=xrpath
++ continue
++ ;;
++
++ -R*)
++ dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
++ # We need an absolute path.
++ case $dir in
++ [\\/]* | [A-Za-z]:[\\/]*) ;;
++ *)
++ $echo "$modename: only absolute run-paths are allowed" 1>&2
++ exit 1
++ ;;
++ esac
++ case "$xrpath " in
++ *" $dir "*) ;;
++ *) xrpath="$xrpath $dir" ;;
++ esac
++ continue
++ ;;
++
++ -static)
++ # The effects of -static are defined in a previous loop.
++ # We used to do the same as -all-static on platforms that
++ # didn't have a PIC flag, but the assumption that the effects
++ # would be equivalent was wrong. It would break on at least
++ # Digital Unix and AIX.
++ continue
++ ;;
++
++ -thread-safe)
++ thread_safe=yes
++ continue
++ ;;
++
++ -version-info)
++ prev=vinfo
++ continue
++ ;;
++
++ -Wc,*)
++ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
++ arg=
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
++ for flag in $args; do
++ IFS="$save_ifs"
++ case $flag in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ flag="\"$flag\""
++ ;;
++ esac
++ arg="$arg $wl$flag"
++ compiler_flags="$compiler_flags $flag"
++ done
++ IFS="$save_ifs"
++ arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
++ ;;
++
++ -Wl,*)
++ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
++ arg=
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
++ for flag in $args; do
++ IFS="$save_ifs"
++ case $flag in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ flag="\"$flag\""
++ ;;
++ esac
++ arg="$arg $wl$flag"
++ compiler_flags="$compiler_flags $wl$flag"
++ linker_flags="$linker_flags $flag"
++ done
++ IFS="$save_ifs"
++ arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
++ ;;
++
++ -Xcompiler)
++ prev=xcompiler
++ continue
++ ;;
++
++ -Xlinker)
++ prev=xlinker
++ continue
++ ;;
++
++ # Some other compiler flag.
++ -* | +*)
++ # Unknown arguments in both finalize_command and compile_command need
++ # to be aesthetically quoted because they are evaled later.
++ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ arg="\"$arg\""
++ ;;
++ esac
++ ;;
++
++ *.lo | *.$objext)
++ # A library or standard object.
++ if test "$prev" = dlfiles; then
++ # This file was specified with -dlopen.
++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
++ dlfiles="$dlfiles $arg"
++ prev=
++ continue
++ else
++ # If libtool objects are unsupported, then we need to preload.
++ prev=dlprefiles
++ fi
++ fi
++
++ if test "$prev" = dlprefiles; then
++ # Preload the old-style object.
++ dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
++ prev=
++ else
++ case $arg in
++ *.lo) libobjs="$libobjs $arg" ;;
++ *) objs="$objs $arg" ;;
++ esac
++ fi
++ ;;
++
++ *.$libext)
++ # An archive.
++ deplibs="$deplibs $arg"
++ old_deplibs="$old_deplibs $arg"
++ continue
++ ;;
++
++ *.la)
++ # A libtool-controlled library.
++
++ if test "$prev" = dlfiles; then
++ # This library was specified with -dlopen.
++ dlfiles="$dlfiles $arg"
++ prev=
++ elif test "$prev" = dlprefiles; then
++ # The library was specified with -dlpreopen.
++ dlprefiles="$dlprefiles $arg"
++ prev=
++ else
++ deplibs="$deplibs $arg"
++ fi
++ continue
++ ;;
++
++ # Some other compiler argument.
++ *)
++ # Unknown arguments in both finalize_command and compile_command need
++ # to be aesthetically quoted because they are evaled later.
++ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ arg="\"$arg\""
++ ;;
++ esac
++ ;;
++ esac # arg
++
++ # Now actually substitute the argument into the commands.
++ if test -n "$arg"; then
++ compile_command="$compile_command $arg"
++ finalize_command="$finalize_command $arg"
++ fi
++ done # argument parsing loop
++
++ if test -n "$prev"; then
++ $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
++ eval arg=\"$export_dynamic_flag_spec\"
++ compile_command="$compile_command $arg"
++ finalize_command="$finalize_command $arg"
++ fi
++
++ # calculate the name of the file, without its directory
++ outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
++ libobjs_save="$libobjs"
++
++ if test -n "$shlibpath_var"; then
++ # get the directories listed in $shlibpath_var
++ eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
++ else
++ shlib_search_path=
++ fi
++ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
++ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
++
++ output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
++ if test "X$output_objdir" = "X$output"; then
++ output_objdir="$objdir"
++ else
++ output_objdir="$output_objdir/$objdir"
++ fi
++ # Create the object directory.
++ if test ! -d $output_objdir; then
++ $show "$mkdir $output_objdir"
++ $run $mkdir $output_objdir
++ status=$?
++ if test $status -ne 0 && test ! -d $output_objdir; then
++ exit $status
++ fi
++ fi
++
++ # Determine the type of output
++ case $output in
++ "")
++ $echo "$modename: you must specify an output file" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ ;;
++ *.$libext) linkmode=oldlib ;;
++ *.lo | *.$objext) linkmode=obj ;;
++ *.la) linkmode=lib ;;
++ *) linkmode=prog ;; # Anything else should be a program.
++ esac
++
++ specialdeplibs=
++ libs=
++ # Find all interdependent deplibs by searching for libraries
++ # that are linked more than once (e.g. -la -lb -la)
++ for deplib in $deplibs; do
++ case "$libs " in
++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ esac
++ libs="$libs $deplib"
++ done
++ deplibs=
++ newdependency_libs=
++ newlib_search_path=
++ need_relink=no # whether we're linking any uninstalled libtool libraries
++ notinst_deplibs= # not-installed libtool libraries
++ notinst_path= # paths that contain not-installed libtool libraries
++ case $linkmode in
++ lib)
++ passes="conv link"
++ for file in $dlfiles $dlprefiles; do
++ case $file in
++ *.la) ;;
++ *)
++ $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
++ exit 1
++ ;;
++ esac
++ done
++ ;;
++ prog)
++ compile_deplibs=
++ finalize_deplibs=
++ alldeplibs=no
++ newdlfiles=
++ newdlprefiles=
++ passes="conv scan dlopen dlpreopen link"
++ ;;
++ *) passes="conv"
++ ;;
++ esac
++ for pass in $passes; do
++ if test "$linkmode" = prog; then
++ # Determine which files to process
++ case $pass in
++ dlopen)
++ libs="$dlfiles"
++ save_deplibs="$deplibs" # Collect dlpreopened libraries
++ deplibs=
++ ;;
++ dlpreopen) libs="$dlprefiles" ;;
++ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
++ esac
++ fi
++ for deplib in $libs; do
++ lib=
++ found=no
++ case $deplib in
++ -l*)
++ if test "$linkmode" = oldlib && test "$linkmode" = obj; then
++ $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2
++ continue
++ fi
++ if test "$pass" = conv; then
++ deplibs="$deplib $deplibs"
++ continue
++ fi
++ name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
++ for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
++ # Search the libtool library
++ lib="$searchdir/lib${name}.la"
++ if test -f "$lib"; then
++ found=yes
++ break
++ fi
++ done
++ if test "$found" != yes; then
++ # deplib doesn't seem to be a libtool library
++ if test "$linkmode,$pass" = "prog,link"; then
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ else
++ deplibs="$deplib $deplibs"
++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
++ fi
++ continue
++ fi
++ ;; # -l
++ -L*)
++ case $linkmode in
++ lib)
++ deplibs="$deplib $deplibs"
++ test "$pass" = conv && continue
++ newdependency_libs="$deplib $newdependency_libs"
++ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
++ ;;
++ prog)
++ if test "$pass" = conv; then
++ deplibs="$deplib $deplibs"
++ continue
++ fi
++ if test "$pass" = scan; then
++ deplibs="$deplib $deplibs"
++ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
++ else
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ fi
++ ;;
++ *)
++ $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2
++ ;;
++ esac # linkmode
++ continue
++ ;; # -L
++ -R*)
++ if test "$pass" = link; then
++ dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
++ # Make sure the xrpath contains only unique directories.
++ case "$xrpath " in
++ *" $dir "*) ;;
++ *) xrpath="$xrpath $dir" ;;
++ esac
++ fi
++ deplibs="$deplib $deplibs"
++ continue
++ ;;
++ *.la) lib="$deplib" ;;
++ *.$libext)
++ if test "$pass" = conv; then
++ deplibs="$deplib $deplibs"
++ continue
++ fi
++ case $linkmode in
++ lib)
++ if test "$deplibs_check_method" != pass_all; then
++ echo
++ echo "*** Warning: This library needs some functionality provided by $deplib."
++ echo "*** I have the capability to make that library automatically link in when"
++ echo "*** you link to this library. But I can only do this if you have a"
++ echo "*** shared version of the library, which you do not appear to have."
++ else
++ echo
++ echo "*** Warning: Linking the shared library $output against the"
++ echo "*** static library $deplib is not portable!"
++ deplibs="$deplib $deplibs"
++ fi
++ continue
++ ;;
++ prog)
++ if test "$pass" != link; then
++ deplibs="$deplib $deplibs"
++ else
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ fi
++ continue
++ ;;
++ esac # linkmode
++ ;; # *.$libext
++ *.lo | *.$objext)
++ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
++ # If there is no dlopen support or we're linking statically,
++ # we need to preload.
++ newdlprefiles="$newdlprefiles $deplib"
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ else
++ newdlfiles="$newdlfiles $deplib"
++ fi
++ continue
++ ;;
++ %DEPLIBS%)
++ alldeplibs=yes
++ continue
++ ;;
++ esac # case $deplib
++ if test $found = yes || test -f "$lib"; then :
++ else
++ $echo "$modename: cannot find the library \`$lib'" 1>&2
++ exit 1
++ fi
++
++ # Check to see that this really is a libtool archive.
++ if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
++ else
++ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
++ exit 1
++ fi
++
++ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
++ test "X$ladir" = "X$lib" && ladir="."
++
++ dlname=
++ dlopen=
++ dlpreopen=
++ libdir=
++ library_names=
++ old_library=
++ # If the library was installed with an old release of libtool,
++ # it will not redefine variable installed.
++ installed=yes
++
++ # Read the .la file
++ case $lib in
++ */* | *\\*) . $lib ;;
++ *) . ./$lib ;;
++ esac
++
++ if test "$linkmode,$pass" = "lib,link" ||
++ test "$linkmode,$pass" = "prog,scan" ||
++ { test "$linkmode" = oldlib && test "$linkmode" = obj; }; then
++ # Add dl[pre]opened files of deplib
++ test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
++ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
++ fi
++
++ if test "$pass" = conv; then
++ # Only check for convenience libraries
++ deplibs="$lib $deplibs"
++ if test -z "$libdir"; then
++ if test -z "$old_library"; then
++ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
++ exit 1
++ fi
++ # It is a libtool convenience library, so add in its objects.
++ convenience="$convenience $ladir/$objdir/$old_library"
++ old_convenience="$old_convenience $ladir/$objdir/$old_library"
++ tmp_libs=
++ for deplib in $dependency_libs; do
++ deplibs="$deplib $deplibs"
++ case "$tmp_libs " in
++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ esac
++ tmp_libs="$tmp_libs $deplib"
++ done
++ elif test "$linkmode" != prog && test "$linkmode" != lib; then
++ $echo "$modename: \`$lib' is not a convenience library" 1>&2
++ exit 1
++ fi
++ continue
++ fi # $pass = conv
++
++ # Get the name of the library we link against.
++ linklib=
++ for l in $old_library $library_names; do
++ linklib="$l"
++ done
++ if test -z "$linklib"; then
++ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
++ exit 1
++ fi
++
++ # This library was specified with -dlopen.
++ if test "$pass" = dlopen; then
++ if test -z "$libdir"; then
++ $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
++ exit 1
++ fi
++ if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
++ # If there is no dlname, no dlopen support or we're linking
++ # statically, we need to preload.
++ dlprefiles="$dlprefiles $lib"
++ else
++ newdlfiles="$newdlfiles $lib"
++ fi
++ continue
++ fi # $pass = dlopen
++
++ # We need an absolute path.
++ case $ladir in
++ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
++ *)
++ abs_ladir=`cd "$ladir" && pwd`
++ if test -z "$abs_ladir"; then
++ $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
++ $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
++ abs_ladir="$ladir"
++ fi
++ ;;
++ esac
++ laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
++
++ # Find the relevant object directory and library name.
++ if test "X$installed" = Xyes; then
++ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
++ $echo "$modename: warning: library \`$lib' was moved." 1>&2
++ dir="$ladir"
++ absdir="$abs_ladir"
++ libdir="$abs_ladir"
++ else
++ dir="$libdir"
++ absdir="$libdir"
++ fi
++ else
++ dir="$ladir/$objdir"
++ absdir="$abs_ladir/$objdir"
++ # Remove this search path later
++ notinst_path="$notinst_path $abs_ladir"
++ fi # $installed = yes
++ name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
++
++ # This library was specified with -dlpreopen.
++ if test "$pass" = dlpreopen; then
++ if test -z "$libdir"; then
++ $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
++ exit 1
++ fi
++ # Prefer using a static library (so that no silly _DYNAMIC symbols
++ # are required to link).
++ if test -n "$old_library"; then
++ newdlprefiles="$newdlprefiles $dir/$old_library"
++ # Otherwise, use the dlname, so that lt_dlopen finds it.
++ elif test -n "$dlname"; then
++ newdlprefiles="$newdlprefiles $dir/$dlname"
++ else
++ newdlprefiles="$newdlprefiles $dir/$linklib"
++ fi
++ fi # $pass = dlpreopen
++
++ if test -z "$libdir"; then
++ # Link the convenience library
++ if test "$linkmode" = lib; then
++ deplibs="$dir/$old_library $deplibs"
++ elif test "$linkmode,$pass" = "prog,link"; then
++ compile_deplibs="$dir/$old_library $compile_deplibs"
++ finalize_deplibs="$dir/$old_library $finalize_deplibs"
++ else
++ deplibs="$lib $deplibs"
++ fi
++ continue
++ fi
++
++ if test "$linkmode" = prog && test "$pass" != link; then
++ newlib_search_path="$newlib_search_path $ladir"
++ deplibs="$lib $deplibs"
++
++ linkalldeplibs=no
++ if test "$link_all_deplibs" != no || test -z "$library_names" ||
++ test "$build_libtool_libs" = no; then
++ linkalldeplibs=yes
++ fi
++
++ tmp_libs=
++ for deplib in $dependency_libs; do
++ case $deplib in
++ -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
++ esac
++ # Need to link against all dependency_libs?
++ if test $linkalldeplibs = yes; then
++ deplibs="$deplib $deplibs"
++ else
++ # Need to hardcode shared library paths
++ # or/and link against static libraries
++ newdependency_libs="$deplib $newdependency_libs"
++ fi
++ case "$tmp_libs " in
++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ esac
++ tmp_libs="$tmp_libs $deplib"
++ done # for deplib
++ continue
++ fi # $linkmode = prog...
++
++ link_static=no # Whether the deplib will be linked statically
++ if test -n "$library_names" &&
++ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
++ # Link against this shared library
++
++ if test "$linkmode,$pass" = "prog,link" ||
++ { test "$linkmode" = lib && test "$hardcode_into_libs" = yes; }; then
++ # Hardcode the library path.
++ # Skip directories that are in the system default run-time
++ # search path.
++ case " $sys_lib_dlsearch_path " in
++ *" $absdir "*) ;;
++ *)
++ case "$compile_rpath " in
++ *" $absdir "*) ;;
++ *) compile_rpath="$compile_rpath $absdir"
++ esac
++ ;;
++ esac
++ case " $sys_lib_dlsearch_path " in
++ *" $libdir "*) ;;
++ *)
++ case "$finalize_rpath " in
++ *" $libdir "*) ;;
++ *) finalize_rpath="$finalize_rpath $libdir"
++ esac
++ ;;
++ esac
++ if test "$linkmode" = prog; then
++ # We need to hardcode the library path
++ if test -n "$shlibpath_var"; then
++ # Make sure the rpath contains only unique directories.
++ case "$temp_rpath " in
++ *" $dir "*) ;;
++ *" $absdir "*) ;;
++ *) temp_rpath="$temp_rpath $dir" ;;
++ esac
++ fi
++ fi
++ fi # $linkmode,$pass = prog,link...
++
++ if test "$alldeplibs" = yes &&
++ { test "$deplibs_check_method" = pass_all ||
++ { test "$build_libtool_libs" = yes &&
++ test -n "$library_names"; }; }; then
++ # We only need to search for static libraries
++ continue
++ fi
++
++ if test "$installed" = no; then
++ notinst_deplibs="$notinst_deplibs $lib"
++ need_relink=yes
++ fi
++
++ if test -n "$old_archive_from_expsyms_cmds"; then
++ # figure out the soname
++ set dummy $library_names
++ realname="$2"
++ shift; shift
++ libname=`eval \\$echo \"$libname_spec\"`
++ # use dlname if we got it. it's perfectly good, no?
++ if test -n "$dlname"; then
++ soname="$dlname"
++ elif test -n "$soname_spec"; then
++ # bleh windows
++ case $host in
++ *cygwin*)
++ major=`expr $current - $age`
++ versuffix="-$major"
++ ;;
++ esac
++ eval soname=\"$soname_spec\"
++ else
++ soname="$realname"
++ fi
++
++ # Make a new name for the extract_expsyms_cmds to use
++ soroot="$soname"
++ soname=`echo $soroot | sed -e 's/^.*\///'`
++ newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a"
++
++ # If the library has no export list, then create one now
++ if test -f "$output_objdir/$soname-def"; then :
++ else
++ $show "extracting exported symbol list from \`$soname'"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ eval cmds=\"$extract_expsyms_cmds\"
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
++ done
++ IFS="$save_ifs"
++ fi
++
++ # Create $newlib
++ if test -f "$output_objdir/$newlib"; then :; else
++ $show "generating import library for \`$soname'"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ eval cmds=\"$old_archive_from_expsyms_cmds\"
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
++ done
++ IFS="$save_ifs"
++ fi
++ # make sure the library variables are pointing to the new library
++ dir=$output_objdir
++ linklib=$newlib
++ fi # test -n $old_archive_from_expsyms_cmds
++
++ if test "$linkmode" = prog || test "$mode" != relink; then
++ add_shlibpath=
++ add_dir=
++ add=
++ lib_linked=yes
++ case $hardcode_action in
++ immediate | unsupported)
++ if test "$hardcode_direct" = no; then
++ add="$dir/$linklib"
++ elif test "$hardcode_minus_L" = no; then
++ case $host in
++ *-*-sunos*) add_shlibpath="$dir" ;;
++ esac
++ add_dir="-L$dir"
++ add="-l$name"
++ elif test "$hardcode_shlibpath_var" = no; then
++ add_shlibpath="$dir"
++ add="-l$name"
++ else
++ lib_linked=no
++ fi
++ ;;
++ relink)
++ if test "$hardcode_direct" = yes; then
++ add="$dir/$linklib"
++ elif test "$hardcode_minus_L" = yes; then
++ add_dir="-L$dir"
++ add="-l$name"
++ elif test "$hardcode_shlibpath_var" = yes; then
++ add_shlibpath="$dir"
++ add="-l$name"
++ else
++ lib_linked=no
++ fi
++ ;;
++ *) lib_linked=no ;;
++ esac
++
++ if test "$lib_linked" != yes; then
++ $echo "$modename: configuration error: unsupported hardcode properties"
++ exit 1
++ fi
++
++ if test -n "$add_shlibpath"; then
++ case :$compile_shlibpath: in
++ *":$add_shlibpath:"*) ;;
++ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
++ esac
++ fi
++ if test "$linkmode" = prog; then
++ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
++ test -n "$add" && compile_deplibs="$add $compile_deplibs"
++ else
++ test -n "$add_dir" && deplibs="$add_dir $deplibs"
++ test -n "$add" && deplibs="$add $deplibs"
++ if test "$hardcode_direct" != yes && \
++ test "$hardcode_minus_L" != yes && \
++ test "$hardcode_shlibpath_var" = yes; then
++ case :$finalize_shlibpath: in
++ *":$libdir:"*) ;;
++ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
++ esac
++ fi
++ fi
++ fi
++
++ if test "$linkmode" = prog || test "$mode" = relink; then
++ add_shlibpath=
++ add_dir=
++ add=
++ # Finalize command for both is simple: just hardcode it.
++ if test "$hardcode_direct" = yes; then
++ add="$libdir/$linklib"
++ elif test "$hardcode_minus_L" = yes; then
++ add_dir="-L$libdir"
++ add="-l$name"
++ elif test "$hardcode_shlibpath_var" = yes; then
++ case :$finalize_shlibpath: in
++ *":$libdir:"*) ;;
++ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
++ esac
++ add="-l$name"
++ else
++ # We cannot seem to hardcode it, guess we'll fake it.
++ add_dir="-L$libdir"
++ add="-l$name"
++ fi
++
++ if test "$linkmode" = prog; then
++ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
++ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
++ else
++ test -n "$add_dir" && deplibs="$add_dir $deplibs"
++ test -n "$add" && deplibs="$add $deplibs"
++ fi
++ fi
++ elif test "$linkmode" = prog; then
++ if test "$alldeplibs" = yes &&
++ { test "$deplibs_check_method" = pass_all ||
++ { test "$build_libtool_libs" = yes &&
++ test -n "$library_names"; }; }; then
++ # We only need to search for static libraries
++ continue
++ fi
++
++ # Try to link the static library
++ # Here we assume that one of hardcode_direct or hardcode_minus_L
++ # is not unsupported. This is valid on all known static and
++ # shared platforms.
++ if test "$hardcode_direct" != unsupported; then
++ test -n "$old_library" && linklib="$old_library"
++ compile_deplibs="$dir/$linklib $compile_deplibs"
++ finalize_deplibs="$dir/$linklib $finalize_deplibs"
++ else
++ compile_deplibs="-l$name -L$dir $compile_deplibs"
++ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
++ fi
++ elif test "$build_libtool_libs" = yes; then
++ # Not a shared library
++ if test "$deplibs_check_method" != pass_all; then
++ # We're trying link a shared library against a static one
++ # but the system doesn't support it.
++
++ # Just print a warning and add the library to dependency_libs so
++ # that the program can be linked against the static library.
++ echo
++ echo "*** Warning: This library needs some functionality provided by $lib."
++ echo "*** I have the capability to make that library automatically link in when"
++ echo "*** you link to this library. But I can only do this if you have a"
++ echo "*** shared version of the library, which you do not appear to have."
++ if test "$module" = yes; then
++ echo "*** Therefore, libtool will create a static module, that should work "
++ echo "*** as long as the dlopening application is linked with the -dlopen flag."
++ if test -z "$global_symbol_pipe"; then
++ echo
++ echo "*** However, this would only work if libtool was able to extract symbol"
++ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
++ echo "*** not find such a program. So, this module is probably useless."
++ echo "*** \`nm' from GNU binutils and a full rebuild may help."
++ fi
++ if test "$build_old_libs" = no; then
++ build_libtool_libs=module
++ build_old_libs=yes
++ else
++ build_libtool_libs=no
++ fi
++ fi
++ else
++ convenience="$convenience $dir/$old_library"
++ old_convenience="$old_convenience $dir/$old_library"
++ deplibs="$dir/$old_library $deplibs"
++ link_static=yes
++ fi
++ fi # link shared/static library?
++
++ if test "$linkmode" = lib; then
++ if test -n "$dependency_libs" &&
++ { test "$hardcode_into_libs" != yes || test $build_old_libs = yes ||
++ test $link_static = yes; }; then
++ # Extract -R from dependency_libs
++ temp_deplibs=
++ for libdir in $dependency_libs; do
++ case $libdir in
++ -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
++ case " $xrpath " in
++ *" $temp_xrpath "*) ;;
++ *) xrpath="$xrpath $temp_xrpath";;
++ esac;;
++ *) temp_deplibs="$temp_deplibs $libdir";;
++ esac
++ done
++ dependency_libs="$temp_deplibs"
++ fi
++
++ newlib_search_path="$newlib_search_path $absdir"
++ # Link against this library
++ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
++ # ... and its dependency_libs
++ tmp_libs=
++ for deplib in $dependency_libs; do
++ newdependency_libs="$deplib $newdependency_libs"
++ case "$tmp_libs " in
++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ esac
++ tmp_libs="$tmp_libs $deplib"
++ done
++
++ if test "$link_all_deplibs" != no; then
++ # Add the search paths of all dependency libraries
++ for deplib in $dependency_libs; do
++ case $deplib in
++ -L*) path="$deplib" ;;
++ *.la)
++ dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
++ test "X$dir" = "X$deplib" && dir="."
++ # We need an absolute path.
++ case $dir in
++ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
++ *)
++ absdir=`cd "$dir" && pwd`
++ if test -z "$absdir"; then
++ $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
++ absdir="$dir"
++ fi
++ ;;
++ esac
++ if grep "^installed=no" $deplib > /dev/null; then
++ path="-L$absdir/$objdir"
++ else
++ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
++ if test -z "$libdir"; then
++ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
++ exit 1
++ fi
++ if test "$absdir" != "$libdir"; then
++ $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
++ fi
++ path="-L$absdir"
++ fi
++ ;;
++ *) continue ;;
++ esac
++ case " $deplibs " in
++ *" $path "*) ;;
++ *) deplibs="$deplibs $path" ;;
++ esac
++ done
++ fi # link_all_deplibs != no
++ fi # linkmode = lib
++ done # for deplib in $libs
++ if test "$pass" = dlpreopen; then
++ # Link the dlpreopened libraries before other libraries
++ for deplib in $save_deplibs; do
++ deplibs="$deplib $deplibs"
++ done
++ fi
++ if test "$pass" != dlopen; then
++ test "$pass" != scan && dependency_libs="$newdependency_libs"
++ if test "$pass" != conv; then
++ # Make sure lib_search_path contains only unique directories.
++ lib_search_path=
++ for dir in $newlib_search_path; do
++ case "$lib_search_path " in
++ *" $dir "*) ;;
++ *) lib_search_path="$lib_search_path $dir" ;;
++ esac
++ done
++ newlib_search_path=
++ fi
++
++ if test "$linkmode,$pass" != "prog,link"; then
++ vars="deplibs"
++ else
++ vars="compile_deplibs finalize_deplibs"
++ fi
++ for var in $vars dependency_libs; do
++ # Add libraries to $var in reverse order
++ eval tmp_libs=\"\$$var\"
++ new_libs=
++ for deplib in $tmp_libs; do
++ case $deplib in
++ -L*) new_libs="$deplib $new_libs" ;;
++ *)
++ case " $specialdeplibs " in
++ *" $deplib "*) new_libs="$deplib $new_libs" ;;
++ *)
++ case " $new_libs " in
++ *" $deplib "*) ;;
++ *) new_libs="$deplib $new_libs" ;;
++ esac
++ ;;
++ esac
++ ;;
++ esac
++ done
++ tmp_libs=
++ for deplib in $new_libs; do
++ case $deplib in
++ -L*)
++ case " $tmp_libs " in
++ *" $deplib "*) ;;
++ *) tmp_libs="$tmp_libs $deplib" ;;
++ esac
++ ;;
++ *) tmp_libs="$tmp_libs $deplib" ;;
++ esac
++ done
++ eval $var=\"$tmp_libs\"
++ done # for var
++ fi
++ if test "$pass" = "conv" &&
++ { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then
++ libs="$deplibs" # reset libs
++ deplibs=
++ fi
++ done # for pass
++ if test "$linkmode" = prog; then
++ dlfiles="$newdlfiles"
++ dlprefiles="$newdlprefiles"
++ fi
++
++ case $linkmode in
++ oldlib)
++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
++ $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
++ fi
++
++ if test -n "$rpath"; then
++ $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
++ fi
++
++ if test -n "$xrpath"; then
++ $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
++ fi
++
++ if test -n "$vinfo"; then
++ $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
++ fi
++
++ if test -n "$release"; then
++ $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
++ fi
++
++ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
++ $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
++ fi
++
++ # Now set the variables for building old libraries.
++ build_libtool_libs=no
++ oldlibs="$output"
++ objs="$objs$old_deplibs"
++ ;;
++
++ lib)
++ # Make sure we only generate libraries of the form `libNAME.la'.
++ case $outputname in
++ lib*)
++ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
++ eval libname=\"$libname_spec\"
++ ;;
++ *)
++ if test "$module" = no; then
++ $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++ if test "$need_lib_prefix" != no; then
++ # Add the "lib" prefix for modules if required
++ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
++ eval libname=\"$libname_spec\"
++ else
++ libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
++ fi
++ ;;
++ esac
++
++ if test -n "$objs"; then
++ if test "$deplibs_check_method" != pass_all; then
++ $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
++ exit 1
++ else
++ echo
++ echo "*** Warning: Linking the shared library $output against the non-libtool"
++ echo "*** objects $objs is not portable!"
++ libobjs="$libobjs $objs"
++ fi
++ fi
++
++ if test "$dlself" != no; then
++ $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
++ fi
++
++ set dummy $rpath
++ if test $# -gt 2; then
++ $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
++ fi
++ install_libdir="$2"
++
++ oldlibs=
++ if test -z "$rpath"; then
++ if test "$build_libtool_libs" = yes; then
++ # Building a libtool convenience library.
++ libext=al
++ oldlibs="$output_objdir/$libname.$libext $oldlibs"
++ build_libtool_libs=convenience
++ build_old_libs=yes
++ fi
++
++ if test -n "$vinfo"; then
++ $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
++ fi
++
++ if test -n "$release"; then
++ $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
++ fi
++ else
++
++ # Parse the version information argument.
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS=':'
++ set dummy $vinfo 0 0 0
++ IFS="$save_ifs"
++
++ if test -n "$8"; then
++ $echo "$modename: too many parameters to \`-version-info'" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ current="$2"
++ revision="$3"
++ age="$4"
++
++ # Check that each of the things are valid numbers.
++ case $current in
++ 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
++ *)
++ $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
++ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
++ exit 1
++ ;;
++ esac
++
++ case $revision in
++ 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
++ *)
++ $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
++ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
++ exit 1
++ ;;
++ esac
++
++ case $age in
++ 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
++ *)
++ $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
++ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
++ exit 1
++ ;;
++ esac
++
++ if test $age -gt $current; then
++ $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
++ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
++ exit 1
++ fi
++
++ # Calculate the version variables.
++ major=
++ versuffix=
++ verstring=
++ case $version_type in
++ none) ;;
++
++ darwin)
++ # Like Linux, but with the current version available in
++ # verstring for coding it into the library header
++ major=.`expr $current - $age`
++ versuffix="$major.$age.$revision"
++ # Darwin ld doesn't like 0 for these options...
++ minor_current=`expr $current + 1`
++ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
++ ;;
++
++ freebsd-aout)
++ major=".$current"
++ versuffix=".$current.$revision";
++ ;;
++
++ freebsd-elf)
++ major=".$current"
++ versuffix=".$current";
++ ;;
++
++ irix)
++ major=`expr $current - $age + 1`
++ verstring="sgi$major.$revision"
++
++ # Add in all the interfaces that we are compatible with.
++ loop=$revision
++ while test $loop != 0; do
++ iface=`expr $revision - $loop`
++ loop=`expr $loop - 1`
++ verstring="sgi$major.$iface:$verstring"
++ done
++
++ # Before this point, $major must not contain `.'.
++ major=.$major
++ versuffix="$major.$revision"
++ ;;
++
++ linux)
++ major=.`expr $current - $age`
++ versuffix="$major.$age.$revision"
++ ;;
++
++ osf)
++ major=`expr $current - $age`
++ versuffix=".$current.$age.$revision"
++ verstring="$current.$age.$revision"
++
++ # Add in all the interfaces that we are compatible with.
++ loop=$age
++ while test $loop != 0; do
++ iface=`expr $current - $loop`
++ loop=`expr $loop - 1`
++ verstring="$verstring:${iface}.0"
++ done
++
++ # Make executables depend on our current version.
++ verstring="$verstring:${current}.0"
++ ;;
++
++ sunos)
++ major=".$current"
++ versuffix=".$current.$revision"
++ ;;
++
++ windows)
++ # Use '-' rather than '.', since we only want one
++ # extension on DOS 8.3 filesystems.
++ major=`expr $current - $age`
++ versuffix="-$major"
++ ;;
++
++ *)
++ $echo "$modename: unknown library version type \`$version_type'" 1>&2
++ echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
++ exit 1
++ ;;
++ esac
++
++ # Clear the version info if we defaulted, and they specified a release.
++ if test -z "$vinfo" && test -n "$release"; then
++ major=
++ verstring="0.0"
++ if test "$need_version" = no; then
++ versuffix=
++ else
++ versuffix=".0.0"
++ fi
++ fi
++
++ # Remove version info from name if versioning should be avoided
++ if test "$avoid_version" = yes && test "$need_version" = no; then
++ major=
++ versuffix=
++ verstring=""
++ fi
++
++ # Check to see if the archive will have undefined symbols.
++ if test "$allow_undefined" = yes; then
++ if test "$allow_undefined_flag" = unsupported; then
++ $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
++ build_libtool_libs=no
++ build_old_libs=yes
++ fi
++ else
++ # Don't allow undefined symbols.
++ allow_undefined_flag="$no_undefined_flag"
++ fi
++ fi
++
++ if test "$mode" != relink; then
++ # Remove our outputs.
++ $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
++ $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
++ fi
++
++ # Now set the variables for building old libraries.
++ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
++ oldlibs="$oldlibs $output_objdir/$libname.$libext"
++
++ # Transform .lo files to .o files.
++ oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
++ fi
++
++ # Eliminate all temporary directories.
++ for path in $notinst_path; do
++ lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'`
++ deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'`
++ dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'`
++ done
++
++ if test -n "$xrpath"; then
++ # If the user specified any rpath flags, then add them.
++ temp_xrpath=
++ for libdir in $xrpath; do
++ temp_xrpath="$temp_xrpath -R$libdir"
++ case "$finalize_rpath " in
++ *" $libdir "*) ;;
++ *) finalize_rpath="$finalize_rpath $libdir" ;;
++ esac
++ done
++ if test $hardcode_into_libs != yes || test $build_old_libs = yes; then
++ dependency_libs="$temp_xrpath $dependency_libs"
++ fi
++ fi
++
++ # Make sure dlfiles contains only unique files that won't be dlpreopened
++ old_dlfiles="$dlfiles"
++ dlfiles=
++ for lib in $old_dlfiles; do
++ case " $dlprefiles $dlfiles " in
++ *" $lib "*) ;;
++ *) dlfiles="$dlfiles $lib" ;;
++ esac
++ done
++
++ # Make sure dlprefiles contains only unique files
++ old_dlprefiles="$dlprefiles"
++ dlprefiles=
++ for lib in $old_dlprefiles; do
++ case "$dlprefiles " in
++ *" $lib "*) ;;
++ *) dlprefiles="$dlprefiles $lib" ;;
++ esac
++ done
++
++ if test "$build_libtool_libs" = yes; then
++ if test -n "$rpath"; then
++ case $host in
++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
++ # these systems don't actually have a c library (as such)!
++ ;;
++ *-*-rhapsody* | *-*-darwin1.[012])
++ # Rhapsody C library is in the System framework
++ deplibs="$deplibs -framework System"
++ ;;
++ *-*-netbsd*)
++ # Don't link with libc until the a.out ld.so is fixed.
++ ;;
++ *)
++ # Add libc to deplibs on all other systems if necessary.
++ if test "$build_libtool_need_lc" = "yes"; then
++ deplibs="$deplibs -lc"
++ fi
++ ;;
++ esac
++ fi
++
++ # Transform deplibs into only deplibs that can be linked in shared.
++ name_save=$name
++ libname_save=$libname
++ release_save=$release
++ versuffix_save=$versuffix
++ major_save=$major
++ # I'm not sure if I'm treating the release correctly. I think
++ # release should show up in the -l (ie -lgmp5) so we don't want to
++ # add it in twice. Is that correct?
++ release=""
++ versuffix=""
++ major=""
++ newdeplibs=
++ droppeddeps=no
++ case $deplibs_check_method in
++ pass_all)
++ # Don't check for shared/static. Everything works.
++ # This might be a little naive. We might want to check
++ # whether the library exists or not. But this is on
++ # osf3 & osf4 and I'm not really sure... Just
++ # implementing what was already the behaviour.
++ newdeplibs=$deplibs
++ ;;
++ test_compile)
++ # This code stresses the "libraries are programs" paradigm to its
++ # limits. Maybe even breaks it. We compile a program, linking it
++ # against the deplibs as a proxy for the library. Then we can check
++ # whether they linked in statically or dynamically with ldd.
++ $rm conftest.c
++ cat > conftest.c <<EOF
++ int main() { return 0; }
++EOF
++ $rm conftest
++ $CC -o conftest conftest.c $deplibs
++ if test $? -eq 0 ; then
++ ldd_output=`ldd conftest`
++ for i in $deplibs; do
++ name="`expr $i : '-l\(.*\)'`"
++ # If $name is empty we are operating on a -L argument.
++ if test -n "$name" && test "$name" != "0"; then
++ libname=`eval \\$echo \"$libname_spec\"`
++ deplib_matches=`eval \\$echo \"$library_names_spec\"`
++ set dummy $deplib_matches
++ deplib_match=$2
++ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
++ newdeplibs="$newdeplibs $i"
++ else
++ droppeddeps=yes
++ echo
++ echo "*** Warning: This library needs some functionality provided by $i."
++ echo "*** I have the capability to make that library automatically link in when"
++ echo "*** you link to this library. But I can only do this if you have a"
++ echo "*** shared version of the library, which you do not appear to have."
++ fi
++ else
++ newdeplibs="$newdeplibs $i"
++ fi
++ done
++ else
++ # Error occured in the first compile. Let's try to salvage the situation:
++ # Compile a seperate program for each library.
++ for i in $deplibs; do
++ name="`expr $i : '-l\(.*\)'`"
++ # If $name is empty we are operating on a -L argument.
++ if test -n "$name" && test "$name" != "0"; then
++ $rm conftest
++ $CC -o conftest conftest.c $i
++ # Did it work?
++ if test $? -eq 0 ; then
++ ldd_output=`ldd conftest`
++ libname=`eval \\$echo \"$libname_spec\"`
++ deplib_matches=`eval \\$echo \"$library_names_spec\"`
++ set dummy $deplib_matches
++ deplib_match=$2
++ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
++ newdeplibs="$newdeplibs $i"
++ else
++ droppeddeps=yes
++ echo
++ echo "*** Warning: This library needs some functionality provided by $i."
++ echo "*** I have the capability to make that library automatically link in when"
++ echo "*** you link to this library. But I can only do this if you have a"
++ echo "*** shared version of the library, which you do not appear to have."
++ fi
++ else
++ droppeddeps=yes
++ echo
++ echo "*** Warning! Library $i is needed by this library but I was not able to"
++ echo "*** make it link in! You will probably need to install it or some"
++ echo "*** library that it depends on before this library will be fully"
++ echo "*** functional. Installing it before continuing would be even better."
++ fi
++ else
++ newdeplibs="$newdeplibs $i"
++ fi
++ done
++ fi
++ ;;
++ file_magic*)
++ set dummy $deplibs_check_method
++ file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
++ for a_deplib in $deplibs; do
++ name="`expr $a_deplib : '-l\(.*\)'`"
++ # If $name is empty we are operating on a -L argument.
++ if test -n "$name" && test "$name" != "0"; then
++ libname=`eval \\$echo \"$libname_spec\"`
++ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
++ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
++ for potent_lib in $potential_libs; do
++ # Follow soft links.
++ if ls -lLd "$potent_lib" 2>/dev/null \
++ | grep " -> " >/dev/null; then
++ continue
++ fi
++ # The statement above tries to avoid entering an
++ # endless loop below, in case of cyclic links.
++ # We might still enter an endless loop, since a link
++ # loop can be closed while we follow links,
++ # but so what?
++ potlib="$potent_lib"
++ while test -h "$potlib" 2>/dev/null; do
++ potliblink=`ls -ld $potlib | sed 's/.* -> //'`
++ case $potliblink in
++ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
++ *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
++ esac
++ done
++ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
++ | sed 10q \
++ | egrep "$file_magic_regex" > /dev/null; then
++ newdeplibs="$newdeplibs $a_deplib"
++ a_deplib=""
++ break 2
++ fi
++ done
++ done
++ if test -n "$a_deplib" ; then
++ droppeddeps=yes
++ echo
++ echo "*** Warning: This library needs some functionality provided by $a_deplib."
++ echo "*** I have the capability to make that library automatically link in when"
++ echo "*** you link to this library. But I can only do this if you have a"
++ echo "*** shared version of the library, which you do not appear to have."
++ fi
++ else
++ # Add a -L argument.
++ newdeplibs="$newdeplibs $a_deplib"
++ fi
++ done # Gone through all deplibs.
++ ;;
++ match_pattern*)
++ set dummy $deplibs_check_method
++ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
++ for a_deplib in $deplibs; do
++ name="`expr $a_deplib : '-l\(.*\)'`"
++ # If $name is empty we are operating on a -L argument.
++ if test -n "$name" && test "$name" != "0"; then
++ libname=`eval \\$echo \"$libname_spec\"`
++ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
++ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
++ for potent_lib in $potential_libs; do
++ if eval echo \"$potent_lib\" 2>/dev/null \
++ | sed 10q \
++ | egrep "$match_pattern_regex" > /dev/null; then
++ newdeplibs="$newdeplibs $a_deplib"
++ a_deplib=""
++ break 2
++ fi
++ done
++ done
++ if test -n "$a_deplib" ; then
++ droppeddeps=yes
++ echo
++ echo "*** Warning: This library needs some functionality provided by $a_deplib."
++ echo "*** I have the capability to make that library automatically link in when"
++ echo "*** you link to this library. But I can only do this if you have a"
++ echo "*** shared version of the library, which you do not appear to have."
++ fi
++ else
++ # Add a -L argument.
++ newdeplibs="$newdeplibs $a_deplib"
++ fi
++ done # Gone through all deplibs.
++ ;;
++ none | unknown | *)
++ newdeplibs=""
++ if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
++ -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' |
++ grep . >/dev/null; then
++ echo
++ if test "X$deplibs_check_method" = "Xnone"; then
++ echo "*** Warning: inter-library dependencies are not supported in this platform."
++ else
++ echo "*** Warning: inter-library dependencies are not known to be supported."
++ fi
++ echo "*** All declared inter-library dependencies are being dropped."
++ droppeddeps=yes
++ fi
++ ;;
++ esac
++ versuffix=$versuffix_save
++ major=$major_save
++ release=$release_save
++ libname=$libname_save
++ name=$name_save
++
++ case $host in
++ *-*-rhapsody* | *-*-darwin1.[012])
++ # On Rhapsody replace the C library is the System framework
++ newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
++ ;;
++ esac
++
++ if test "$droppeddeps" = yes; then
++ if test "$module" = yes; then
++ echo
++ echo "*** Warning: libtool could not satisfy all declared inter-library"
++ echo "*** dependencies of module $libname. Therefore, libtool will create"
++ echo "*** a static module, that should work as long as the dlopening"
++ echo "*** application is linked with the -dlopen flag."
++ if test -z "$global_symbol_pipe"; then
++ echo
++ echo "*** However, this would only work if libtool was able to extract symbol"
++ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
++ echo "*** not find such a program. So, this module is probably useless."
++ echo "*** \`nm' from GNU binutils and a full rebuild may help."
++ fi
++ if test "$build_old_libs" = no; then
++ oldlibs="$output_objdir/$libname.$libext"
++ build_libtool_libs=module
++ build_old_libs=yes
++ else
++ build_libtool_libs=no
++ fi
++ else
++ echo "*** The inter-library dependencies that have been dropped here will be"
++ echo "*** automatically added whenever a program is linked with this library"
++ echo "*** or is declared to -dlopen it."
++
++ if test $allow_undefined = no; then
++ echo
++ echo "*** Since this library must not contain undefined symbols,"
++ echo "*** because either the platform does not support them or"
++ echo "*** it was explicitly requested with -no-undefined,"
++ echo "*** libtool will only create a static version of it."
++ if test "$build_old_libs" = no; then
++ oldlibs="$output_objdir/$libname.$libext"
++ build_libtool_libs=module
++ build_old_libs=yes
++ else
++ build_libtool_libs=no
++ fi
++ fi
++ fi
++ fi
++ # Done checking deplibs!
++ deplibs=$newdeplibs
++ fi
++
++ # All the library-specific variables (install_libdir is set above).
++ library_names=
++ old_library=
++ dlname=
++
++ # Test again, we may have decided not to build it any more
++ if test "$build_libtool_libs" = yes; then
++ if test "$hardcode_into_libs" = yes; then
++ # Hardcode the library paths
++ hardcode_libdirs=
++ dep_rpath=
++ rpath="$finalize_rpath"
++ test "$mode" != relink && rpath="$compile_rpath$rpath"
++ for libdir in $rpath; do
++ if test -n "$hardcode_libdir_flag_spec"; then
++ if test -n "$hardcode_libdir_separator"; then
++ if test -z "$hardcode_libdirs"; then
++ hardcode_libdirs="$libdir"
++ else
++ # Just accumulate the unique libdirs.
++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
++ ;;
++ *)
++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
++ ;;
++ esac
++ fi
++ else
++ eval flag=\"$hardcode_libdir_flag_spec\"
++ dep_rpath="$dep_rpath $flag"
++ fi
++ elif test -n "$runpath_var"; then
++ case "$perm_rpath " in
++ *" $libdir "*) ;;
++ *) perm_rpath="$perm_rpath $libdir" ;;
++ esac
++ fi
++ done
++ # Substitute the hardcoded libdirs into the rpath.
++ if test -n "$hardcode_libdir_separator" &&
++ test -n "$hardcode_libdirs"; then
++ libdir="$hardcode_libdirs"
++ eval dep_rpath=\"$hardcode_libdir_flag_spec\"
++ fi
++ if test -n "$runpath_var" && test -n "$perm_rpath"; then
++ # We should set the runpath_var.
++ rpath=
++ for dir in $perm_rpath; do
++ rpath="$rpath$dir:"
++ done
++ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
++ fi
++ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
++ fi
++
++ shlibpath="$finalize_shlibpath"
++ test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
++ if test -n "$shlibpath"; then
++ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
++ fi
++
++ # Get the real and link names of the library.
++ eval library_names=\"$library_names_spec\"
++ set dummy $library_names
++ realname="$2"
++ shift; shift
++
++ if test -n "$soname_spec"; then
++ eval soname=\"$soname_spec\"
++ else
++ soname="$realname"
++ fi
++ test -z "$dlname" && dlname=$soname
++
++ lib="$output_objdir/$realname"
++ for link
++ do
++ linknames="$linknames $link"
++ done
++
++ # Ensure that we have .o objects for linkers which dislike .lo
++ # (e.g. aix) in case we are running --disable-static
++ for obj in $libobjs; do
++ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
++ if test "X$xdir" = "X$obj"; then
++ xdir="."
++ else
++ xdir="$xdir"
++ fi
++ baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
++ oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
++ if test ! -f $xdir/$oldobj; then
++ $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
++ $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
++ fi
++ done
++
++ # Use standard objects if they are pic
++ test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
++
++ # Prepare the list of exported symbols
++ if test -z "$export_symbols"; then
++ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
++ $show "generating symbol list for \`$libname.la'"
++ export_symbols="$output_objdir/$libname.exp"
++ $run $rm $export_symbols
++ eval cmds=\"$export_symbols_cmds\"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
++ done
++ IFS="$save_ifs"
++ if test -n "$export_symbols_regex"; then
++ $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
++ $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
++ $show "$mv \"${export_symbols}T\" \"$export_symbols\""
++ $run eval '$mv "${export_symbols}T" "$export_symbols"'
++ fi
++ fi
++ fi
++
++ if test -n "$export_symbols" && test -n "$include_expsyms"; then
++ $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
++ fi
++
++ if test -n "$convenience"; then
++ if test -n "$whole_archive_flag_spec"; then
++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
++ else
++ gentop="$output_objdir/${outputname}x"
++ $show "${rm}r $gentop"
++ $run ${rm}r "$gentop"
++ $show "mkdir $gentop"
++ $run mkdir "$gentop"
++ status=$?
++ if test $status -ne 0 && test ! -d "$gentop"; then
++ exit $status
++ fi
++ generated="$generated $gentop"
++
++ for xlib in $convenience; do
++ # Extract the objects.
++ case $xlib in
++ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
++ *) xabs=`pwd`"/$xlib" ;;
++ esac
++ xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
++ xdir="$gentop/$xlib"
++
++ $show "${rm}r $xdir"
++ $run ${rm}r "$xdir"
++ $show "mkdir $xdir"
++ $run mkdir "$xdir"
++ status=$?
++ if test $status -ne 0 && test ! -d "$xdir"; then
++ exit $status
++ fi
++ $show "(cd $xdir && $AR x $xabs)"
++ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
++
++ libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
++ done
++ fi
++ fi
++
++ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
++ eval flag=\"$thread_safe_flag_spec\"
++ linker_flags="$linker_flags $flag"
++ fi
++
++ # Make a backup of the uninstalled library when relinking
++ if test "$mode" = relink; then
++ $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
++ fi
++
++ # Do each of the archive commands.
++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
++ eval cmds=\"$archive_expsym_cmds\"
++ else
++ eval cmds=\"$archive_cmds\"
++ fi
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
++ done
++ IFS="$save_ifs"
++
++ # Restore the uninstalled library and exit
++ if test "$mode" = relink; then
++ $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
++ exit 0
++ fi
++
++ # Create links to the real library.
++ for linkname in $linknames; do
++ if test "$realname" != "$linkname"; then
++ $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
++ $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
++ fi
++ done
++
++ # If -module or -export-dynamic was specified, set the dlname.
++ if test "$module" = yes || test "$export_dynamic" = yes; then
++ # On all known operating systems, these are identical.
++ dlname="$soname"
++ fi
++ fi
++ ;;
++
++ obj)
++ if test -n "$deplibs"; then
++ $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
++ fi
++
++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
++ $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
++ fi
++
++ if test -n "$rpath"; then
++ $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
++ fi
++
++ if test -n "$xrpath"; then
++ $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
++ fi
++
++ if test -n "$vinfo"; then
++ $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
++ fi
++
++ if test -n "$release"; then
++ $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
++ fi
++
++ case $output in
++ *.lo)
++ if test -n "$objs$old_deplibs"; then
++ $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
++ exit 1
++ fi
++ libobj="$output"
++ obj=`$echo "X$output" | $Xsed -e "$lo2o"`
++ ;;
++ *)
++ libobj=
++ obj="$output"
++ ;;
++ esac
++
++ # Delete the old objects.
++ $run $rm $obj $libobj
++
++ # Objects from convenience libraries. This assumes
++ # single-version convenience libraries. Whenever we create
++ # different ones for PIC/non-PIC, this we'll have to duplicate
++ # the extraction.
++ reload_conv_objs=
++ gentop=
++ # reload_cmds runs $LD directly, so let us get rid of
++ # -Wl from whole_archive_flag_spec
++ wl=
++
++ if test -n "$convenience"; then
++ if test -n "$whole_archive_flag_spec"; then
++ eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
++ else
++ gentop="$output_objdir/${obj}x"
++ $show "${rm}r $gentop"
++ $run ${rm}r "$gentop"
++ $show "mkdir $gentop"
++ $run mkdir "$gentop"
++ status=$?
++ if test $status -ne 0 && test ! -d "$gentop"; then
++ exit $status
++ fi
++ generated="$generated $gentop"
++
++ for xlib in $convenience; do
++ # Extract the objects.
++ case $xlib in
++ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
++ *) xabs=`pwd`"/$xlib" ;;
++ esac
++ xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
++ xdir="$gentop/$xlib"
++
++ $show "${rm}r $xdir"
++ $run ${rm}r "$xdir"
++ $show "mkdir $xdir"
++ $run mkdir "$xdir"
++ status=$?
++ if test $status -ne 0 && test ! -d "$xdir"; then
++ exit $status
++ fi
++ $show "(cd $xdir && $AR x $xabs)"
++ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
++
++ reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
++ done
++ fi
++ fi
++
++ # Create the old-style object.
++ reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
++
++ output="$obj"
++ eval cmds=\"$reload_cmds\"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
++ done
++ IFS="$save_ifs"
++
++ # Exit if we aren't doing a library object file.
++ if test -z "$libobj"; then
++ if test -n "$gentop"; then
++ $show "${rm}r $gentop"
++ $run ${rm}r $gentop
++ fi
++
++ exit 0
++ fi
++
++ if test "$build_libtool_libs" != yes; then
++ if test -n "$gentop"; then
++ $show "${rm}r $gentop"
++ $run ${rm}r $gentop
++ fi
++
++ # Create an invalid libtool object if no PIC, so that we don't
++ # accidentally link it into a program.
++ $show "echo timestamp > $libobj"
++ $run eval "echo timestamp > $libobj" || exit $?
++ exit 0
++ fi
++
++ if test -n "$pic_flag" || test "$pic_mode" != default; then
++ # Only do commands if we really have different PIC objects.
++ reload_objs="$libobjs $reload_conv_objs"
++ output="$libobj"
++ eval cmds=\"$reload_cmds\"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
++ done
++ IFS="$save_ifs"
++ else
++ # Just create a symlink.
++ $show $rm $libobj
++ $run $rm $libobj
++ xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
++ if test "X$xdir" = "X$libobj"; then
++ xdir="."
++ else
++ xdir="$xdir"
++ fi
++ baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
++ oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
++ $show "(cd $xdir && $LN_S $oldobj $baseobj)"
++ $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
++ fi
++
++ if test -n "$gentop"; then
++ $show "${rm}r $gentop"
++ $run ${rm}r $gentop
++ fi
++
++ exit 0
++ ;;
++
++ prog)
++ case $host in
++ *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;;
++ esac
++ if test -n "$vinfo"; then
++ $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
++ fi
++
++ if test -n "$release"; then
++ $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
++ fi
++
++ if test "$preload" = yes; then
++ if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
++ test "$dlopen_self_static" = unknown; then
++ $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
++ fi
++ fi
++
++ case $host in
++ *-*-rhapsody* | *-*-darwin1.[012])
++ # On Rhapsody replace the C library is the System framework
++ compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
++ finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
++ ;;
++ esac
++
++ compile_command="$compile_command $compile_deplibs"
++ finalize_command="$finalize_command $finalize_deplibs"
++
++ if test -n "$rpath$xrpath"; then
++ # If the user specified any rpath flags, then add them.
++ for libdir in $rpath $xrpath; do
++ # This is the magic to use -rpath.
++ case "$finalize_rpath " in
++ *" $libdir "*) ;;
++ *) finalize_rpath="$finalize_rpath $libdir" ;;
++ esac
++ done
++ fi
++
++ # Now hardcode the library paths
++ rpath=
++ hardcode_libdirs=
++ for libdir in $compile_rpath $finalize_rpath; do
++ if test -n "$hardcode_libdir_flag_spec"; then
++ if test -n "$hardcode_libdir_separator"; then
++ if test -z "$hardcode_libdirs"; then
++ hardcode_libdirs="$libdir"
++ else
++ # Just accumulate the unique libdirs.
++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
++ ;;
++ *)
++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
++ ;;
++ esac
++ fi
++ else
++ eval flag=\"$hardcode_libdir_flag_spec\"
++ rpath="$rpath $flag"
++ fi
++ elif test -n "$runpath_var"; then
++ case "$perm_rpath " in
++ *" $libdir "*) ;;
++ *) perm_rpath="$perm_rpath $libdir" ;;
++ esac
++ fi
++ case $host in
++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++ case :$dllsearchpath: in
++ *":$libdir:"*) ;;
++ *) dllsearchpath="$dllsearchpath:$libdir";;
++ esac
++ ;;
++ esac
++ done
++ # Substitute the hardcoded libdirs into the rpath.
++ if test -n "$hardcode_libdir_separator" &&
++ test -n "$hardcode_libdirs"; then
++ libdir="$hardcode_libdirs"
++ eval rpath=\" $hardcode_libdir_flag_spec\"
++ fi
++ compile_rpath="$rpath"
++
++ rpath=
++ hardcode_libdirs=
++ for libdir in $finalize_rpath; do
++ if test -n "$hardcode_libdir_flag_spec"; then
++ if test -n "$hardcode_libdir_separator"; then
++ if test -z "$hardcode_libdirs"; then
++ hardcode_libdirs="$libdir"
++ else
++ # Just accumulate the unique libdirs.
++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
++ ;;
++ *)
++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
++ ;;
++ esac
++ fi
++ else
++ eval flag=\"$hardcode_libdir_flag_spec\"
++ rpath="$rpath $flag"
++ fi
++ elif test -n "$runpath_var"; then
++ case "$finalize_perm_rpath " in
++ *" $libdir "*) ;;
++ *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
++ esac
++ fi
++ done
++ # Substitute the hardcoded libdirs into the rpath.
++ if test -n "$hardcode_libdir_separator" &&
++ test -n "$hardcode_libdirs"; then
++ libdir="$hardcode_libdirs"
++ eval rpath=\" $hardcode_libdir_flag_spec\"
++ fi
++ finalize_rpath="$rpath"
++
++ if test -n "$libobjs" && test "$build_old_libs" = yes; then
++ # Transform all the library objects into standard objects.
++ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
++ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
++ fi
++
++ dlsyms=
++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
++ if test -n "$NM" && test -n "$global_symbol_pipe"; then
++ dlsyms="${outputname}S.c"
++ else
++ $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
++ fi
++ fi
++
++ if test -n "$dlsyms"; then
++ case $dlsyms in
++ "") ;;
++ *.c)
++ # Discover the nlist of each of the dlfiles.
++ nlist="$output_objdir/${outputname}.nm"
++
++ $show "$rm $nlist ${nlist}S ${nlist}T"
++ $run $rm "$nlist" "${nlist}S" "${nlist}T"
++
++ # Parse the name list into a source file.
++ $show "creating $output_objdir/$dlsyms"
++
++ test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
++/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
++/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
++
++#ifdef __cplusplus
++extern \"C\" {
++#endif
++
++/* Prevent the only kind of declaration conflicts we can make. */
++#define lt_preloaded_symbols some_other_symbol
++
++/* External symbol declarations for the compiler. */\
++"
++
++ if test "$dlself" = yes; then
++ $show "generating symbol list for \`$output'"
++
++ test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
++
++ # Add our own program objects to the symbol list.
++ progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
++ for arg in $progfiles; do
++ $show "extracting global C symbols from \`$arg'"
++ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
++ done
++
++ if test -n "$exclude_expsyms"; then
++ $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
++ $run eval '$mv "$nlist"T "$nlist"'
++ fi
++
++ if test -n "$export_symbols_regex"; then
++ $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
++ $run eval '$mv "$nlist"T "$nlist"'
++ fi
++
++ # Prepare the list of exported symbols
++ if test -z "$export_symbols"; then
++ export_symbols="$output_objdir/$output.exp"
++ $run $rm $export_symbols
++ $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
++ else
++ $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
++ $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
++ $run eval 'mv "$nlist"T "$nlist"'
++ fi
++ fi
++
++ for arg in $dlprefiles; do
++ $show "extracting global C symbols from \`$arg'"
++ name=`echo "$arg" | sed -e 's%^.*/%%'`
++ $run eval 'echo ": $name " >> "$nlist"'
++ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
++ done
++
++ if test -z "$run"; then
++ # Make sure we have at least an empty file.
++ test -f "$nlist" || : > "$nlist"
++
++ if test -n "$exclude_expsyms"; then
++ egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
++ $mv "$nlist"T "$nlist"
++ fi
++
++ # Try sorting and uniquifying the output.
++ if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
++ :
++ else
++ grep -v "^: " < "$nlist" > "$nlist"S
++ fi
++
++ if test -f "$nlist"S; then
++ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
++ else
++ echo '/* NONE */' >> "$output_objdir/$dlsyms"
++ fi
++
++ $echo >> "$output_objdir/$dlsyms" "\
++
++#undef lt_preloaded_symbols
++
++#if defined (__STDC__) && __STDC__
++# define lt_ptr_t void *
++#else
++# define lt_ptr_t char *
++# define const
++#endif
++
++/* The mapping between symbol names and symbols. */
++const struct {
++ const char *name;
++ lt_ptr_t address;
++}
++lt_preloaded_symbols[] =
++{\
++"
++
++ sed -n -e 's/^: \([^ ]*\) $/ {\"\1\", (lt_ptr_t) 0},/p' \
++ -e 's/^. \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr_t) \&\2},/p' \
++ < "$nlist" >> "$output_objdir/$dlsyms"
++
++ $echo >> "$output_objdir/$dlsyms" "\
++ {0, (lt_ptr_t) 0}
++};
++
++/* This works around a problem in FreeBSD linker */
++#ifdef FREEBSD_WORKAROUND
++static const void *lt_preloaded_setup() {
++ return lt_preloaded_symbols;
++}
++#endif
++
++#ifdef __cplusplus
++}
++#endif\
++"
++ fi
++
++ pic_flag_for_symtable=
++ case $host in
++ # compiling the symbol table file with pic_flag works around
++ # a FreeBSD bug that causes programs to crash when -lm is
++ # linked before any other PIC object. But we must not use
++ # pic_flag when linking with -static. The problem exists in
++ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
++ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
++ case "$compile_command " in
++ *" -static "*) ;;
++ *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
++ esac;;
++ *-*-hpux*)
++ case "$compile_command " in
++ *" -static "*) ;;
++ *) pic_flag_for_symtable=" $pic_flag -DPIC";;
++ esac
++ esac
++
++ # Now compile the dynamic symbol file.
++ $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
++ $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
++
++ # Clean up the generated files.
++ $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
++ $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
++
++ # Transform the symbol file into the correct name.
++ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
++ ;;
++ *)
++ $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
++ exit 1
++ ;;
++ esac
++ else
++ # We keep going just in case the user didn't refer to
++ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
++ # really was required.
++
++ # Nullify the symbol file.
++ compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
++ fi
++
++ if test $need_relink = no || test "$build_libtool_libs" != yes; then
++ # Replace the output file specification.
++ compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
++ link_command="$compile_command$compile_rpath"
++
++ # We have no uninstalled library dependencies, so finalize right now.
++ $show "$link_command"
++ $run eval "$link_command"
++ status=$?
++
++ # Delete the generated files.
++ if test -n "$dlsyms"; then
++ $show "$rm $output_objdir/${outputname}S.${objext}"
++ $run $rm "$output_objdir/${outputname}S.${objext}"
++ fi
++
++ exit $status
++ fi
++
++ if test -n "$shlibpath_var"; then
++ # We should set the shlibpath_var
++ rpath=
++ for dir in $temp_rpath; do
++ case $dir in
++ [\\/]* | [A-Za-z]:[\\/]*)
++ # Absolute path.
++ rpath="$rpath$dir:"
++ ;;
++ *)
++ # Relative path: add a thisdir entry.
++ rpath="$rpath\$thisdir/$dir:"
++ ;;
++ esac
++ done
++ temp_rpath="$rpath"
++ fi
++
++ if test -n "$compile_shlibpath$finalize_shlibpath"; then
++ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
++ fi
++ if test -n "$finalize_shlibpath"; then
++ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
++ fi
++
++ compile_var=
++ finalize_var=
++ if test -n "$runpath_var"; then
++ if test -n "$perm_rpath"; then
++ # We should set the runpath_var.
++ rpath=
++ for dir in $perm_rpath; do
++ rpath="$rpath$dir:"
++ done
++ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
++ fi
++ if test -n "$finalize_perm_rpath"; then
++ # We should set the runpath_var.
++ rpath=
++ for dir in $finalize_perm_rpath; do
++ rpath="$rpath$dir:"
++ done
++ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
++ fi
++ fi
++
++ if test "$no_install" = yes; then
++ # We don't need to create a wrapper script.
++ link_command="$compile_var$compile_command$compile_rpath"
++ # Replace the output file specification.
++ link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
++ # Delete the old output file.
++ $run $rm $output
++ # Link the executable and exit
++ $show "$link_command"
++ $run eval "$link_command" || exit $?
++ exit 0
++ fi
++
++ if test "$hardcode_action" = relink; then
++ # Fast installation is not supported
++ link_command="$compile_var$compile_command$compile_rpath"
++ relink_command="$finalize_var$finalize_command$finalize_rpath"
++
++ $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
++ $echo "$modename: \`$output' will be relinked during installation" 1>&2
++ else
++ if test "$fast_install" != no; then
++ link_command="$finalize_var$compile_command$finalize_rpath"
++ if test "$fast_install" = yes; then
++ relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
++ else
++ # fast_install is set to needless
++ relink_command=
++ fi
++ else
++ link_command="$compile_var$compile_command$compile_rpath"
++ relink_command="$finalize_var$finalize_command$finalize_rpath"
++ fi
++ fi
++
++ # Replace the output file specification.
++ link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
++
++ # Delete the old output files.
++ $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
++
++ $show "$link_command"
++ $run eval "$link_command" || exit $?
++
++ # Now create the wrapper script.
++ $show "creating $output"
++
++ # Quote the relink command for shipping.
++ if test -n "$relink_command"; then
++ # Preserve any variables that may affect compiler behavior
++ for var in $variables_saved_for_relink; do
++ if eval test -z \"\${$var+set}\"; then
++ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
++ elif eval var_value=\$$var; test -z "$var_value"; then
++ relink_command="$var=; export $var; $relink_command"
++ else
++ var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
++ relink_command="$var=\"$var_value\"; export $var; $relink_command"
++ fi
++ done
++ relink_command="cd `pwd`; $relink_command"
++ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
++ fi
++
++ # Quote $echo for shipping.
++ if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
++ case $0 in
++ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
++ *) qecho="$SHELL `pwd`/$0 --fallback-echo";;
++ esac
++ qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
++ else
++ qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
++ fi
++
++ # Only actually do things if our run command is non-null.
++ if test -z "$run"; then
++ # win32 will think the script is a binary if it has
++ # a .exe suffix, so we strip it off here.
++ case $output in
++ *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
++ esac
++ # test for cygwin because mv fails w/o .exe extensions
++ case $host in
++ *cygwin*) exeext=.exe ;;
++ *) exeext= ;;
++ esac
++ $rm $output
++ trap "$rm $output; exit 1" 1 2 15
++
++ $echo > $output "\
++#! $SHELL
++
++# $output - temporary wrapper script for $objdir/$outputname
++# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
++#
++# The $output program cannot be directly executed until all the libtool
++# libraries that it depends on are installed.
++#
++# This wrapper script should never be moved out of the build directory.
++# If it is, it will not operate correctly.
++
++# Sed substitution that helps us do robust quoting. It backslashifies
++# metacharacters that are still active within double-quoted strings.
++Xsed='sed -e 1s/^X//'
++sed_quote_subst='$sed_quote_subst'
++
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
++
++relink_command=\"$relink_command\"
++
++# This environment variable determines our operation mode.
++if test \"\$libtool_install_magic\" = \"$magic\"; then
++ # install mode needs the following variable:
++ notinst_deplibs='$notinst_deplibs'
++else
++ # When we are sourced in execute mode, \$file and \$echo are already set.
++ if test \"\$libtool_execute_magic\" != \"$magic\"; then
++ echo=\"$qecho\"
++ file=\"\$0\"
++ # Make sure echo works.
++ if test \"X\$1\" = X--no-reexec; then
++ # Discard the --no-reexec flag, and continue.
++ shift
++ elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
++ # Yippee, \$echo works!
++ :
++ else
++ # Restart under the correct shell, and then maybe \$echo will work.
++ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
++ fi
++ fi\
++"
++ $echo >> $output "\
++
++ # Find the directory that this script lives in.
++ thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
++ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
++
++ # Follow symbolic links until we get to the real thisdir.
++ file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
++ while test -n \"\$file\"; do
++ destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
++
++ # If there was a directory component, then change thisdir.
++ if test \"x\$destdir\" != \"x\$file\"; then
++ case \"\$destdir\" in
++ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
++ *) thisdir=\"\$thisdir/\$destdir\" ;;
++ esac
++ fi
++
++ file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
++ file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
++ done
++
++ # Try to get the absolute directory name.
++ absdir=\`cd \"\$thisdir\" && pwd\`
++ test -n \"\$absdir\" && thisdir=\"\$absdir\"
++"
++
++ if test "$fast_install" = yes; then
++ echo >> $output "\
++ program=lt-'$outputname'$exeext
++ progdir=\"\$thisdir/$objdir\"
++
++ if test ! -f \"\$progdir/\$program\" || \\
++ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
++ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
++
++ file=\"\$\$-\$program\"
++
++ if test ! -d \"\$progdir\"; then
++ $mkdir \"\$progdir\"
++ else
++ $rm \"\$progdir/\$file\"
++ fi"
++
++ echo >> $output "\
++
++ # relink executable if necessary
++ if test -n \"\$relink_command\"; then
++ if (eval \$relink_command); then :
++ else
++ $rm \"\$progdir/\$file\"
++ exit 1
++ fi
++ fi
++
++ $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
++ { $rm \"\$progdir/\$program\";
++ $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
++ $rm \"\$progdir/\$file\"
++ fi"
++ else
++ echo >> $output "\
++ program='$outputname'
++ progdir=\"\$thisdir/$objdir\"
++"
++ fi
++
++ echo >> $output "\
++
++ if test -f \"\$progdir/\$program\"; then"
++
++ # Export our shlibpath_var if we have one.
++ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
++ $echo >> $output "\
++ # Add our own library path to $shlibpath_var
++ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
++
++ # Some systems cannot cope with colon-terminated $shlibpath_var
++ # The second colon is a workaround for a bug in BeOS R4 sed
++ $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
++
++ export $shlibpath_var
++"
++ fi
++
++ # fixup the dll searchpath if we need to.
++ if test -n "$dllsearchpath"; then
++ $echo >> $output "\
++ # Add the dll search path components to the executable PATH
++ PATH=$dllsearchpath:\$PATH
++"
++ fi
++
++ $echo >> $output "\
++ if test \"\$libtool_execute_magic\" != \"$magic\"; then
++ # Run the actual program with our arguments.
++"
++ case $host in
++ # win32 systems need to use the prog path for dll
++ # lookup to work
++ *-*-cygwin* | *-*-pw32*)
++ $echo >> $output "\
++ exec \$progdir/\$program \${1+\"\$@\"}
++"
++ ;;
++
++ # Backslashes separate directories on plain windows
++ *-*-mingw | *-*-os2*)
++ $echo >> $output "\
++ exec \$progdir\\\\\$program \${1+\"\$@\"}
++"
++ ;;
++
++ *)
++ $echo >> $output "\
++ # Export the path to the program.
++ PATH=\"\$progdir:\$PATH\"
++ export PATH
++
++ exec \$program \${1+\"\$@\"}
++"
++ ;;
++ esac
++ $echo >> $output "\
++ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
++ exit 1
++ fi
++ else
++ # The program doesn't exist.
++ \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
++ \$echo \"This script is just a wrapper for \$program.\" 1>&2
++ echo \"See the $PACKAGE documentation for more information.\" 1>&2
++ exit 1
++ fi
++fi\
++"
++ chmod +x $output
++ fi
++ exit 0
++ ;;
++ esac
++
++ # See if we need to build an old-fashioned archive.
++ for oldlib in $oldlibs; do
++
++ if test "$build_libtool_libs" = convenience; then
++ oldobjs="$libobjs_save"
++ addlibs="$convenience"
++ build_libtool_libs=no
++ else
++ if test "$build_libtool_libs" = module; then
++ oldobjs="$libobjs_save"
++ build_libtool_libs=no
++ else
++ oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
++ fi
++ addlibs="$old_convenience"
++ fi
++
++ if test -n "$addlibs"; then
++ gentop="$output_objdir/${outputname}x"
++ $show "${rm}r $gentop"
++ $run ${rm}r "$gentop"
++ $show "mkdir $gentop"
++ $run mkdir "$gentop"
++ status=$?
++ if test $status -ne 0 && test ! -d "$gentop"; then
++ exit $status
++ fi
++ generated="$generated $gentop"
++
++ # Add in members from convenience archives.
++ for xlib in $addlibs; do
++ # Extract the objects.
++ case $xlib in
++ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
++ *) xabs=`pwd`"/$xlib" ;;
++ esac
++ xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
++ xdir="$gentop/$xlib"
++
++ $show "${rm}r $xdir"
++ $run ${rm}r "$xdir"
++ $show "mkdir $xdir"
++ $run mkdir "$xdir"
++ status=$?
++ if test $status -ne 0 && test ! -d "$xdir"; then
++ exit $status
++ fi
++ $show "(cd $xdir && $AR x $xabs)"
++ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
++
++ oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
++ done
++ fi
++
++ # Do each command in the archive commands.
++ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
++ eval cmds=\"$old_archive_from_new_cmds\"
++ else
++ # Ensure that we have .o objects in place in case we decided
++ # not to build a shared library, and have fallen back to building
++ # static libs even though --disable-static was passed!
++ for oldobj in $oldobjs; do
++ if test ! -f $oldobj; then
++ xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
++ if test "X$xdir" = "X$oldobj"; then
++ xdir="."
++ else
++ xdir="$xdir"
++ fi
++ baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
++ obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
++ $show "(cd $xdir && ${LN_S} $obj $baseobj)"
++ $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
++ fi
++ done
++
++ eval cmds=\"$old_archive_cmds\"
++ fi
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
++ done
++ IFS="$save_ifs"
++ done
++
++ if test -n "$generated"; then
++ $show "${rm}r$generated"
++ $run ${rm}r$generated
++ fi
++
++ # Now create the libtool archive.
++ case $output in
++ *.la)
++ old_library=
++ test "$build_old_libs" = yes && old_library="$libname.$libext"
++ $show "creating $output"
++
++ # Preserve any variables that may affect compiler behavior
++ for var in $variables_saved_for_relink; do
++ if eval test -z \"\${$var+set}\"; then
++ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
++ elif eval var_value=\$$var; test -z "$var_value"; then
++ relink_command="$var=; export $var; $relink_command"
++ else
++ var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
++ relink_command="$var=\"$var_value\"; export $var; $relink_command"
++ fi
++ done
++ # Quote the link command for shipping.
++ relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args"
++ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
++
++ # Only create the output if not a dry run.
++ if test -z "$run"; then
++ for installed in no yes; do
++ if test "$installed" = yes; then
++ if test -z "$install_libdir"; then
++ break
++ fi
++ output="$output_objdir/$outputname"i
++ # Replace all uninstalled libtool libraries with the installed ones
++ newdependency_libs=
++ for deplib in $dependency_libs; do
++ case $deplib in
++ *.la)
++ name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
++ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
++ if test -z "$libdir"; then
++ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
++ exit 1
++ fi
++ newdependency_libs="$newdependency_libs $libdir/$name"
++ ;;
++ *) newdependency_libs="$newdependency_libs $deplib" ;;
++ esac
++ done
++ dependency_libs="$newdependency_libs"
++ newdlfiles=
++ for lib in $dlfiles; do
++ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
++ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
++ if test -z "$libdir"; then
++ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
++ exit 1
++ fi
++ newdlfiles="$newdlfiles $libdir/$name"
++ done
++ dlfiles="$newdlfiles"
++ newdlprefiles=
++ for lib in $dlprefiles; do
++ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
++ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
++ if test -z "$libdir"; then
++ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
++ exit 1
++ fi
++ newdlprefiles="$newdlprefiles $libdir/$name"
++ done
++ dlprefiles="$newdlprefiles"
++ fi
++ $rm $output
++ # place dlname in correct position for cygwin
++ tdlname=$dlname
++ case $host,$output,$installed,$module,$dlname in
++ *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
++ esac
++ $echo > $output "\
++# $outputname - a libtool library file
++# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
++#
++# Please DO NOT delete this file!
++# It is necessary for linking the library.
++
++# The name that we can dlopen(3).
++dlname='$tdlname'
++
++# Names of this library.
++library_names='$library_names'
++
++# The name of the static archive.
++old_library='$old_library'
++
++# Libraries that this one depends upon.
++dependency_libs='$dependency_libs'
++
++# Version information for $libname.
++current=$current
++age=$age
++revision=$revision
++
++# Is this an already installed library?
++installed=$installed
++
++# Files to dlopen/dlpreopen
++dlopen='$dlfiles'
++dlpreopen='$dlprefiles'
++
++# Directory that this library needs to be installed in:
++libdir='$install_libdir'"
++ if test "$installed" = no && test $need_relink = yes; then
++ $echo >> $output "\
++relink_command=\"$relink_command\""
++ fi
++ done
++ fi
++
++ # Do a symbolic link so that the libtool archive can be found in
++ # LD_LIBRARY_PATH before the program is installed.
++ $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
++ $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
++ ;;
++ esac
++ exit 0
++ ;;
++
++ # libtool install mode
++ install)
++ modename="$modename: install"
++
++ # There may be an optional sh(1) argument at the beginning of
++ # install_prog (especially on Windows NT).
++ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
++ # Allow the use of GNU shtool's install command.
++ $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
++ # Aesthetically quote it.
++ arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
++ arg="\"$arg\""
++ ;;
++ esac
++ install_prog="$arg "
++ arg="$1"
++ shift
++ else
++ install_prog=
++ arg="$nonopt"
++ fi
++
++ # The real first argument should be the name of the installation program.
++ # Aesthetically quote it.
++ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
++ arg="\"$arg\""
++ ;;
++ esac
++ install_prog="$install_prog$arg"
++
++ # We need to accept at least all the BSD install flags.
++ dest=
++ files=
++ opts=
++ prev=
++ install_type=
++ isdir=no
++ stripme=
++ for arg
++ do
++ if test -n "$dest"; then
++ files="$files $dest"
++ dest="$arg"
++ continue
++ fi
++
++ case $arg in
++ -d) isdir=yes ;;
++ -f) prev="-f" ;;
++ -g) prev="-g" ;;
++ -m) prev="-m" ;;
++ -o) prev="-o" ;;
++ -s)
++ stripme=" -s"
++ continue
++ ;;
++ -*) ;;
++
++ *)
++ # If the previous option needed an argument, then skip it.
++ if test -n "$prev"; then
++ prev=
++ else
++ dest="$arg"
++ continue
++ fi
++ ;;
++ esac
++
++ # Aesthetically quote the argument.
++ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
++ arg="\"$arg\""
++ ;;
++ esac
++ install_prog="$install_prog $arg"
++ done
++
++ if test -z "$install_prog"; then
++ $echo "$modename: you must specify an install program" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ if test -n "$prev"; then
++ $echo "$modename: the \`$prev' option requires an argument" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ if test -z "$files"; then
++ if test -z "$dest"; then
++ $echo "$modename: no file or destination specified" 1>&2
++ else
++ $echo "$modename: you must specify a destination" 1>&2
++ fi
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ # Strip any trailing slash from the destination.
++ dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
++
++ # Check to see that the destination is a directory.
++ test -d "$dest" && isdir=yes
++ if test "$isdir" = yes; then
++ destdir="$dest"
++ destname=
++ else
++ destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
++ test "X$destdir" = "X$dest" && destdir=.
++ destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
++
++ # Not a directory, so check to see that there is only one file specified.
++ set dummy $files
++ if test $# -gt 2; then
++ $echo "$modename: \`$dest' is not a directory" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++ fi
++ case $destdir in
++ [\\/]* | [A-Za-z]:[\\/]*) ;;
++ *)
++ for file in $files; do
++ case $file in
++ *.lo) ;;
++ *)
++ $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ ;;
++ esac
++ done
++ ;;
++ esac
++
++ # This variable tells wrapper scripts just to set variables rather
++ # than running their programs.
++ libtool_install_magic="$magic"
++
++ staticlibs=
++ future_libdirs=
++ current_libdirs=
++ for file in $files; do
++
++ # Do each installation.
++ case $file in
++ *.$libext)
++ # Do the static libraries later.
++ staticlibs="$staticlibs $file"
++ ;;
++
++ *.la)
++ # Check to see that this really is a libtool archive.
++ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
++ else
++ $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ library_names=
++ old_library=
++ relink_command=
++ # If there is no directory component, then add one.
++ case $file in
++ */* | *\\*) . $file ;;
++ *) . ./$file ;;
++ esac
++
++ # Add the libdir to current_libdirs if it is the destination.
++ if test "X$destdir" = "X$libdir"; then
++ case "$current_libdirs " in
++ *" $libdir "*) ;;
++ *) current_libdirs="$current_libdirs $libdir" ;;
++ esac
++ else
++ # Note the libdir as a future libdir.
++ case "$future_libdirs " in
++ *" $libdir "*) ;;
++ *) future_libdirs="$future_libdirs $libdir" ;;
++ esac
++ fi
++
++ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
++ test "X$dir" = "X$file/" && dir=
++ dir="$dir$objdir"
++
++ if test -n "$relink_command"; then
++ $echo "$modename: warning: relinking \`$file'" 1>&2
++ $show "$relink_command"
++ if $run eval "$relink_command"; then :
++ else
++ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
++ continue
++ fi
++ fi
++
++ # See the names of the shared library.
++ set dummy $library_names
++ if test -n "$2"; then
++ realname="$2"
++ shift
++ shift
++
++ srcname="$realname"
++ test -n "$relink_command" && srcname="$realname"T
++
++ # Install the shared library and build the symlinks.
++ $show "$install_prog $dir/$srcname $destdir/$realname"
++ $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
++ if test -n "$stripme" && test -n "$striplib"; then
++ $show "$striplib $destdir/$realname"
++ $run eval "$striplib $destdir/$realname" || exit $?
++ fi
++
++ if test $# -gt 0; then
++ # Delete the old symlinks, and create new ones.
++ for linkname
++ do
++ if test "$linkname" != "$realname"; then
++ $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
++ $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
++ fi
++ done
++ fi
++
++ # Do each command in the postinstall commands.
++ lib="$destdir/$realname"
++ eval cmds=\"$postinstall_cmds\"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
++ done
++ IFS="$save_ifs"
++ fi
++
++ # Install the pseudo-library for information purposes.
++ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
++ instname="$dir/$name"i
++ $show "$install_prog $instname $destdir/$name"
++ $run eval "$install_prog $instname $destdir/$name" || exit $?
++
++ # Maybe install the static library, too.
++ test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
++ ;;
++
++ *.lo)
++ # Install (i.e. copy) a libtool object.
++
++ # Figure out destination file name, if it wasn't already specified.
++ if test -n "$destname"; then
++ destfile="$destdir/$destname"
++ else
++ destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
++ destfile="$destdir/$destfile"
++ fi
++
++ # Deduce the name of the destination old-style object file.
++ case $destfile in
++ *.lo)
++ staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
++ ;;
++ *.$objext)
++ staticdest="$destfile"
++ destfile=
++ ;;
++ *)
++ $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ ;;
++ esac
++
++ # Install the libtool object if requested.
++ if test -n "$destfile"; then
++ $show "$install_prog $file $destfile"
++ $run eval "$install_prog $file $destfile" || exit $?
++ fi
++
++ # Install the old object if enabled.
++ if test "$build_old_libs" = yes; then
++ # Deduce the name of the old-style object file.
++ staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
++
++ $show "$install_prog $staticobj $staticdest"
++ $run eval "$install_prog \$staticobj \$staticdest" || exit $?
++ fi
++ exit 0
++ ;;
++
++ *)
++ # Figure out destination file name, if it wasn't already specified.
++ if test -n "$destname"; then
++ destfile="$destdir/$destname"
++ else
++ destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
++ destfile="$destdir/$destfile"
++ fi
++
++ # Do a test to see if this is really a libtool program.
++ if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++ notinst_deplibs=
++ relink_command=
++
++ # If there is no directory component, then add one.
++ case $file in
++ */* | *\\*) . $file ;;
++ *) . ./$file ;;
++ esac
++
++ # Check the variables that should have been set.
++ if test -z "$notinst_deplibs"; then
++ $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
++ exit 1
++ fi
++
++ finalize=yes
++ for lib in $notinst_deplibs; do
++ # Check to see that each library is installed.
++ libdir=
++ if test -f "$lib"; then
++ # If there is no directory component, then add one.
++ case $lib in
++ */* | *\\*) . $lib ;;
++ *) . ./$lib ;;
++ esac
++ fi
++ libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
++ if test -n "$libdir" && test ! -f "$libfile"; then
++ $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
++ finalize=no
++ fi
++ done
++
++ relink_command=
++ # If there is no directory component, then add one.
++ case $file in
++ */* | *\\*) . $file ;;
++ *) . ./$file ;;
++ esac
++
++ outputname=
++ if test "$fast_install" = no && test -n "$relink_command"; then
++ if test "$finalize" = yes && test -z "$run"; then
++ tmpdir="/tmp"
++ test -n "$TMPDIR" && tmpdir="$TMPDIR"
++ tmpdir="$tmpdir/libtool-$$"
++ if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
++ else
++ $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
++ continue
++ fi
++ file=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
++ outputname="$tmpdir/$file"
++ # Replace the output file specification.
++ relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
++
++ $show "$relink_command"
++ if $run eval "$relink_command"; then :
++ else
++ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
++ ${rm}r "$tmpdir"
++ continue
++ fi
++ file="$outputname"
++ else
++ $echo "$modename: warning: cannot relink \`$file'" 1>&2
++ fi
++ else
++ # Install the binary that we compiled earlier.
++ file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
++ fi
++ fi
++
++ # remove .exe since cygwin /usr/bin/install will append another
++ # one anyways
++ case $install_prog,$host in
++ /usr/bin/install*,*cygwin*)
++ case $file:$destfile in
++ *.exe:*.exe)
++ # this is ok
++ ;;
++ *.exe:*)
++ destfile=$destfile.exe
++ ;;
++ *:*.exe)
++ destfile=`echo $destfile | sed -e 's,.exe$,,'`
++ ;;
++ esac
++ ;;
++ esac
++ $show "$install_prog$stripme $file $destfile"
++ $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
++ test -n "$outputname" && ${rm}r "$tmpdir"
++ ;;
++ esac
++ done
++
++ for file in $staticlibs; do
++ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
++
++ # Set up the ranlib parameters.
++ oldlib="$destdir/$name"
++
++ $show "$install_prog $file $oldlib"
++ $run eval "$install_prog \$file \$oldlib" || exit $?
++
++ if test -n "$stripme" && test -n "$striplib"; then
++ $show "$old_striplib $oldlib"
++ $run eval "$old_striplib $oldlib" || exit $?
++ fi
++
++ # Do each command in the postinstall commands.
++ eval cmds=\"$old_postinstall_cmds\"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
++ done
++ IFS="$save_ifs"
++ done
++
++ if test -n "$future_libdirs"; then
++ $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
++ fi
++
++ if test -n "$current_libdirs"; then
++ # Maybe just do a dry run.
++ test -n "$run" && current_libdirs=" -n$current_libdirs"
++ exec $SHELL $0 --finish$current_libdirs
++ exit 1
++ fi
++
++ exit 0
++ ;;
++
++ # libtool finish mode
++ finish)
++ modename="$modename: finish"
++ libdirs="$nonopt"
++ admincmds=
++
++ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
++ for dir
++ do
++ libdirs="$libdirs $dir"
++ done
++
++ for libdir in $libdirs; do
++ if test -n "$finish_cmds"; then
++ # Do each command in the finish commands.
++ eval cmds=\"$finish_cmds\"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || admincmds="$admincmds
++ $cmd"
++ done
++ IFS="$save_ifs"
++ fi
++ if test -n "$finish_eval"; then
++ # Do the single finish_eval.
++ eval cmds=\"$finish_eval\"
++ $run eval "$cmds" || admincmds="$admincmds
++ $cmds"
++ fi
++ done
++ fi
++
++ # Exit here if they wanted silent mode.
++ test "$show" = ":" && exit 0
++
++ echo "----------------------------------------------------------------------"
++ echo "Libraries have been installed in:"
++ for libdir in $libdirs; do
++ echo " $libdir"
++ done
++ echo
++ echo "If you ever happen to want to link against installed libraries"
++ echo "in a given directory, LIBDIR, you must either use libtool, and"
++ echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
++ echo "flag during linking and do at least one of the following:"
++ if test -n "$shlibpath_var"; then
++ echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
++ echo " during execution"
++ fi
++ if test -n "$runpath_var"; then
++ echo " - add LIBDIR to the \`$runpath_var' environment variable"
++ echo " during linking"
++ fi
++ if test -n "$hardcode_libdir_flag_spec"; then
++ libdir=LIBDIR
++ eval flag=\"$hardcode_libdir_flag_spec\"
++
++ echo " - use the \`$flag' linker flag"
++ fi
++ if test -n "$admincmds"; then
++ echo " - have your system administrator run these commands:$admincmds"
++ fi
++ if test -f /etc/ld.so.conf; then
++ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
++ fi
++ echo
++ echo "See any operating system documentation about shared libraries for"
++ echo "more information, such as the ld(1) and ld.so(8) manual pages."
++ echo "----------------------------------------------------------------------"
++ exit 0
++ ;;
++
++ # libtool execute mode
++ execute)
++ modename="$modename: execute"
++
++ # The first argument is the command name.
++ cmd="$nonopt"
++ if test -z "$cmd"; then
++ $echo "$modename: you must specify a COMMAND" 1>&2
++ $echo "$help"
++ exit 1
++ fi
++
++ # Handle -dlopen flags immediately.
++ for file in $execute_dlfiles; do
++ if test ! -f "$file"; then
++ $echo "$modename: \`$file' is not a file" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ dir=
++ case $file in
++ *.la)
++ # Check to see that this really is a libtool archive.
++ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
++ else
++ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ # Read the libtool library.
++ dlname=
++ library_names=
++
++ # If there is no directory component, then add one.
++ case $file in
++ */* | *\\*) . $file ;;
++ *) . ./$file ;;
++ esac
++
++ # Skip this library if it cannot be dlopened.
++ if test -z "$dlname"; then
++ # Warn if it was a shared library.
++ test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
++ continue
++ fi
++
++ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
++ test "X$dir" = "X$file" && dir=.
++
++ if test -f "$dir/$objdir/$dlname"; then
++ dir="$dir/$objdir"
++ else
++ $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
++ exit 1
++ fi
++ ;;
++
++ *.lo)
++ # Just add the directory containing the .lo file.
++ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
++ test "X$dir" = "X$file" && dir=.
++ ;;
++
++ *)
++ $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
++ continue
++ ;;
++ esac
++
++ # Get the absolute pathname.
++ absdir=`cd "$dir" && pwd`
++ test -n "$absdir" && dir="$absdir"
++
++ # Now add the directory to shlibpath_var.
++ if eval "test -z \"\$$shlibpath_var\""; then
++ eval "$shlibpath_var=\"\$dir\""
++ else
++ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
++ fi
++ done
++
++ # This variable tells wrapper scripts just to set shlibpath_var
++ # rather than running their programs.
++ libtool_execute_magic="$magic"
++
++ # Check if any of the arguments is a wrapper script.
++ args=
++ for file
++ do
++ case $file in
++ -*) ;;
++ *)
++ # Do a test to see if this is really a libtool program.
++ if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++ # If there is no directory component, then add one.
++ case $file in
++ */* | *\\*) . $file ;;
++ *) . ./$file ;;
++ esac
++
++ # Transform arg to wrapped name.
++ file="$progdir/$program"
++ fi
++ ;;
++ esac
++ # Quote arguments (to preserve shell metacharacters).
++ file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
++ args="$args \"$file\""
++ done
++
++ if test -z "$run"; then
++ if test -n "$shlibpath_var"; then
++ # Export the shlibpath_var.
++ eval "export $shlibpath_var"
++ fi
++
++ # Restore saved enviroment variables
++ if test "${save_LC_ALL+set}" = set; then
++ LC_ALL="$save_LC_ALL"; export LC_ALL
++ fi
++ if test "${save_LANG+set}" = set; then
++ LANG="$save_LANG"; export LANG
++ fi
++
++ # Now actually exec the command.
++ eval "exec \$cmd$args"
++
++ $echo "$modename: cannot exec \$cmd$args"
++ exit 1
++ else
++ # Display what would be done.
++ if test -n "$shlibpath_var"; then
++ eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
++ $echo "export $shlibpath_var"
++ fi
++ $echo "$cmd$args"
++ exit 0
++ fi
++ ;;
++
++ # libtool clean and uninstall mode
++ clean | uninstall)
++ modename="$modename: $mode"
++ rm="$nonopt"
++ files=
++ rmforce=
++ exit_status=0
++
++ # This variable tells wrapper scripts just to set variables rather
++ # than running their programs.
++ libtool_install_magic="$magic"
++
++ for arg
++ do
++ case $arg in
++ -f) rm="$rm $arg"; rmforce=yes ;;
++ -*) rm="$rm $arg" ;;
++ *) files="$files $arg" ;;
++ esac
++ done
++
++ if test -z "$rm"; then
++ $echo "$modename: you must specify an RM program" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ rmdirs=
++
++ for file in $files; do
++ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
++ if test "X$dir" = "X$file"; then
++ dir=.
++ objdir="$objdir"
++ else
++ objdir="$dir/$objdir"
++ fi
++ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
++ test $mode = uninstall && objdir="$dir"
++
++ # Remember objdir for removal later, being careful to avoid duplicates
++ if test $mode = clean; then
++ case " $rmdirs " in
++ *" $objdir "*) ;;
++ *) rmdirs="$rmdirs $objdir" ;;
++ esac
++ fi
++
++ # Don't error if the file doesn't exist and rm -f was used.
++ if (test -L "$file") >/dev/null 2>&1 \
++ || (test -h "$file") >/dev/null 2>&1 \
++ || test -f "$file"; then
++ :
++ elif test -d "$file"; then
++ exit_status=1
++ continue
++ elif test "$rmforce" = yes; then
++ continue
++ fi
++
++ rmfiles="$file"
++
++ case $name in
++ *.la)
++ # Possibly a libtool archive, so verify it.
++ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++ . $dir/$name
++
++ # Delete the libtool libraries and symlinks.
++ for n in $library_names; do
++ rmfiles="$rmfiles $objdir/$n"
++ done
++ test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
++ test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
++
++ if test $mode = uninstall; then
++ if test -n "$library_names"; then
++ # Do each command in the postuninstall commands.
++ eval cmds=\"$postuninstall_cmds\"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd"
++ if test $? != 0 && test "$rmforce" != yes; then
++ exit_status=1
++ fi
++ done
++ IFS="$save_ifs"
++ fi
++
++ if test -n "$old_library"; then
++ # Do each command in the old_postuninstall commands.
++ eval cmds=\"$old_postuninstall_cmds\"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd"
++ if test $? != 0 && test "$rmforce" != yes; then
++ exit_status=1
++ fi
++ done
++ IFS="$save_ifs"
++ fi
++ # FIXME: should reinstall the best remaining shared library.
++ fi
++ fi
++ ;;
++
++ *.lo)
++ if test "$build_old_libs" = yes; then
++ oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
++ rmfiles="$rmfiles $dir/$oldobj"
++ fi
++ ;;
++
++ *)
++ # Do a test to see if this is a libtool program.
++ if test $mode = clean &&
++ (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++ relink_command=
++ . $dir/$file
++
++ rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
++ if test "$fast_install" = yes && test -n "$relink_command"; then
++ rmfiles="$rmfiles $objdir/lt-$name"
++ fi
++ fi
++ ;;
++ esac
++ $show "$rm $rmfiles"
++ $run $rm $rmfiles || exit_status=1
++ done
++
++ # Try to remove the ${objdir}s in the directories where we deleted files
++ for dir in $rmdirs; do
++ if test -d "$dir"; then
++ $show "rmdir $dir"
++ $run rmdir $dir >/dev/null 2>&1
++ fi
++ done
++
++ exit $exit_status
++ ;;
++
++ "")
++ $echo "$modename: you must specify a MODE" 1>&2
++ $echo "$generic_help" 1>&2
++ exit 1
++ ;;
++ esac
++
++ $echo "$modename: invalid operation mode \`$mode'" 1>&2
++ $echo "$generic_help" 1>&2
++ exit 1
++fi # test -z "$show_help"
++
++# We need to display help for each of the modes.
++case $mode in
++"") $echo \
++"Usage: $modename [OPTION]... [MODE-ARG]...
++
++Provide generalized library-building support services.
++
++ --config show all configuration variables
++ --debug enable verbose shell tracing
++-n, --dry-run display commands without modifying any files
++ --features display basic configuration information and exit
++ --finish same as \`--mode=finish'
++ --help display this help message and exit
++ --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
++ --quiet same as \`--silent'
++ --silent don't print informational messages
++ --version print version information
++
++MODE must be one of the following:
++
++ clean remove files from the build directory
++ compile compile a source file into a libtool object
++ execute automatically set library path, then run a program
++ finish complete the installation of libtool libraries
++ install install libraries or executables
++ link create a library or an executable
++ uninstall remove libraries from an installed directory
++
++MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
++a more detailed description of MODE."
++ exit 0
++ ;;
++
++clean)
++ $echo \
++"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
++
++Remove files from the build directory.
++
++RM is the name of the program to use to delete files associated with each FILE
++(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
++to RM.
++
++If FILE is a libtool library, object or program, all the files associated
++with it are deleted. Otherwise, only FILE itself is deleted using RM."
++ ;;
++
++compile)
++ $echo \
++"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
++
++Compile a source file into a libtool library object.
++
++This mode accepts the following additional options:
++
++ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
++ -prefer-pic try to building PIC objects only
++ -prefer-non-pic try to building non-PIC objects only
++ -static always build a \`.o' file suitable for static linking
++
++COMPILE-COMMAND is a command to be used in creating a \`standard' object file
++from the given SOURCEFILE.
++
++The output file name is determined by removing the directory component from
++SOURCEFILE, then substituting the C source code suffix \`.c' with the
++library object suffix, \`.lo'."
++ ;;
++
++execute)
++ $echo \
++"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
++
++Automatically set library path, then run a program.
++
++This mode accepts the following additional options:
++
++ -dlopen FILE add the directory containing FILE to the library path
++
++This mode sets the library path environment variable according to \`-dlopen'
++flags.
++
++If any of the ARGS are libtool executable wrappers, then they are translated
++into their corresponding uninstalled binary, and any of their required library
++directories are added to the library path.
++
++Then, COMMAND is executed, with ARGS as arguments."
++ ;;
++
++finish)
++ $echo \
++"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
++
++Complete the installation of libtool libraries.
++
++Each LIBDIR is a directory that contains libtool libraries.
++
++The commands that this mode executes may require superuser privileges. Use
++the \`--dry-run' option if you just want to see what would be executed."
++ ;;
++
++install)
++ $echo \
++"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
++
++Install executables or libraries.
++
++INSTALL-COMMAND is the installation command. The first component should be
++either the \`install' or \`cp' program.
++
++The rest of the components are interpreted as arguments to that command (only
++BSD-compatible install options are recognized)."
++ ;;
++
++link)
++ $echo \
++"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
++
++Link object files or libraries together to form another library, or to
++create an executable program.
++
++LINK-COMMAND is a command using the C compiler that you would use to create
++a program from several object files.
++
++The following components of LINK-COMMAND are treated specially:
++
++ -all-static do not do any dynamic linking at all
++ -avoid-version do not add a version suffix if possible
++ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
++ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
++ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
++ -export-symbols SYMFILE
++ try to export only the symbols listed in SYMFILE
++ -export-symbols-regex REGEX
++ try to export only the symbols matching REGEX
++ -LLIBDIR search LIBDIR for required installed libraries
++ -lNAME OUTPUT-FILE requires the installed library libNAME
++ -module build a library that can dlopened
++ -no-fast-install disable the fast-install mode
++ -no-install link a not-installable executable
++ -no-undefined declare that a library does not refer to external symbols
++ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
++ -release RELEASE specify package release information
++ -rpath LIBDIR the created library will eventually be installed in LIBDIR
++ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
++ -static do not do any dynamic linking of libtool libraries
++ -version-info CURRENT[:REVISION[:AGE]]
++ specify library version info [each variable defaults to 0]
++
++All other options (arguments beginning with \`-') are ignored.
++
++Every other argument is treated as a filename. Files ending in \`.la' are
++treated as uninstalled libtool libraries, other files are standard or library
++object files.
++
++If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
++only library objects (\`.lo' files) may be specified, and \`-rpath' is
++required, except when creating a convenience library.
++
++If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
++using \`ar' and \`ranlib', or on Windows using \`lib'.
++
++If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
++is created, otherwise an executable program is created."
++ ;;
++
++uninstall)
++ $echo \
++"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
++
++Remove libraries from an installation directory.
++
++RM is the name of the program to use to delete files associated with each FILE
++(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
++to RM.
++
++If FILE is a libtool library, all the files associated with it are deleted.
++Otherwise, only FILE itself is deleted using RM."
++ ;;
++
++*)
++ $echo "$modename: invalid operation mode \`$mode'" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ ;;
++esac
++
++echo
++$echo "Try \`$modename --help' for more information about other modes."
++
++exit 0
++
++# Local Variables:
++# mode:shell-script
++# sh-indentation:2
++# End:
+--- openjade1.3-1.3.2.orig/config/config.guess
++++ openjade1.3-1.3.2/config/config.guess
+@@ -1,9 +1,9 @@
+ #! /bin/sh
+ # Attempt to guess a canonical system name.
+ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+-# 2000, 2001, 2002 Free Software Foundation, Inc.
++# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+-timestamp='2002-01-10'
++timestamp='2005-04-22'
+
+ # This file is free software; you can redistribute it and/or modify it
+ # under the terms of the GNU General Public License as published by
+@@ -53,7 +53,7 @@
+ GNU config.guess ($timestamp)
+
+ Originally written by Per Bothner.
+-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+ Free Software Foundation, Inc.
+
+ This is free software; see the source for copying conditions. There is NO
+@@ -88,30 +88,42 @@
+ exit 1
+ fi
+
++trap 'exit 1' 1 2 15
+
+-dummy=dummy-$$
+-trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15
++# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
++# compiler to aid in system detection is discouraged as it requires
++# temporary files to be created and, as you can see below, it is a
++# headache to deal with in a portable fashion.
+
+-# CC_FOR_BUILD -- compiler used by this script.
+ # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+ # use `HOST_CC' if defined, but it is deprecated.
+
+-set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in
+- ,,) echo "int dummy(){}" > $dummy.c ;
+- for c in cc gcc c89 ; do
+- ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ;
+- if test $? = 0 ; then
++# Portable tmp directory creation inspired by the Autoconf team.
++
++set_cc_for_build='
++trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
++trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
++: ${TMPDIR=/tmp} ;
++ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
++ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
++ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
++ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
++dummy=$tmp/dummy ;
++tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
++case $CC_FOR_BUILD,$HOST_CC,$CC in
++ ,,) echo "int x;" > $dummy.c ;
++ for c in cc gcc c89 c99 ; do
++ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+- rm -f $dummy.c $dummy.o $dummy.rel ;
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+-esac'
++esac ;'
+
+ # This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+ # (ghazi@noc.rutgers.edu 1994-08-24)
+@@ -138,9 +150,11 @@
+ #
+ # Note: NetBSD doesn't particularly care about the vendor
+ # portion of the name. We always set it to "unknown".
+- UNAME_MACHINE_ARCH=`(uname -p) 2>/dev/null` || \
+- UNAME_MACHINE_ARCH=unknown
++ sysctl="sysctl -n hw.machine_arch"
++ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
++ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ case "${UNAME_MACHINE_ARCH}" in
++ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+@@ -166,21 +180,38 @@
+ ;;
+ esac
+ # The OS release
+- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
++ # Debian GNU/NetBSD machines have a different userland, and
++ # thus, need a distinct triplet. However, they do not need
++ # kernel version information, so it can be replaced with a
++ # suitable tag, in the style of linux-gnu.
++ case "${UNAME_VERSION}" in
++ Debian*)
++ release='-gnu'
++ ;;
++ *)
++ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
++ ;;
++ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit 0 ;;
++ amd64:OpenBSD:*:*)
++ echo x86_64-unknown-openbsd${UNAME_RELEASE}
++ exit 0 ;;
+ amiga:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+- arc:OpenBSD:*:*)
+- echo mipsel-unknown-openbsd${UNAME_RELEASE}
++ cats:OpenBSD:*:*)
++ echo arm-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ hp300:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
++ luna88k:OpenBSD:*:*)
++ echo m88k-unknown-openbsd${UNAME_RELEASE}
++ exit 0 ;;
+ mac68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+@@ -196,83 +227,76 @@
+ mvmeppc:OpenBSD:*:*)
+ echo powerpc-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+- pmax:OpenBSD:*:*)
+- echo mipsel-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+ sgi:OpenBSD:*:*)
+- echo mipseb-unknown-openbsd${UNAME_RELEASE}
++ echo mips64-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sun3:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+- wgrisc:OpenBSD:*:*)
+- echo mipsel-unknown-openbsd${UNAME_RELEASE}
+- exit 0 ;;
+ *:OpenBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
++ *:ekkoBSD:*:*)
++ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
++ exit 0 ;;
++ macppc:MirBSD:*:*)
++ echo powerppc-unknown-mirbsd${UNAME_RELEASE}
++ exit 0 ;;
++ *:MirBSD:*:*)
++ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
++ exit 0 ;;
+ alpha:OSF1:*:*)
+- if test $UNAME_RELEASE = "V4.0"; then
++ case $UNAME_RELEASE in
++ *4.0)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+- fi
++ ;;
++ *5.*)
++ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
++ ;;
++ esac
++ # According to Compaq, /usr/sbin/psrinfo has been available on
++ # OSF/1 and Tru64 systems produced since 1995. I hope that
++ # covers most systems running today. This code pipes the CPU
++ # types through head -n 1, so we only detect the type of CPU 0.
++ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
++ case "$ALPHA_CPU_TYPE" in
++ "EV4 (21064)")
++ UNAME_MACHINE="alpha" ;;
++ "EV4.5 (21064)")
++ UNAME_MACHINE="alpha" ;;
++ "LCA4 (21066/21068)")
++ UNAME_MACHINE="alpha" ;;
++ "EV5 (21164)")
++ UNAME_MACHINE="alphaev5" ;;
++ "EV5.6 (21164A)")
++ UNAME_MACHINE="alphaev56" ;;
++ "EV5.6 (21164PC)")
++ UNAME_MACHINE="alphapca56" ;;
++ "EV5.7 (21164PC)")
++ UNAME_MACHINE="alphapca57" ;;
++ "EV6 (21264)")
++ UNAME_MACHINE="alphaev6" ;;
++ "EV6.7 (21264A)")
++ UNAME_MACHINE="alphaev67" ;;
++ "EV6.8CB (21264C)")
++ UNAME_MACHINE="alphaev68" ;;
++ "EV6.8AL (21264B)")
++ UNAME_MACHINE="alphaev68" ;;
++ "EV6.8CX (21264D)")
++ UNAME_MACHINE="alphaev68" ;;
++ "EV6.9A (21264/EV69A)")
++ UNAME_MACHINE="alphaev69" ;;
++ "EV7 (21364)")
++ UNAME_MACHINE="alphaev7" ;;
++ "EV7.9 (21364A)")
++ UNAME_MACHINE="alphaev79" ;;
++ esac
++ # A Pn.n version is a patched version.
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+- cat <<EOF >$dummy.s
+- .data
+-\$Lformat:
+- .byte 37,100,45,37,120,10,0 # "%d-%x\n"
+-
+- .text
+- .globl main
+- .align 4
+- .ent main
+-main:
+- .frame \$30,16,\$26,0
+- ldgp \$29,0(\$27)
+- .prologue 1
+- .long 0x47e03d80 # implver \$0
+- lda \$2,-1
+- .long 0x47e20c21 # amask \$2,\$1
+- lda \$16,\$Lformat
+- mov \$0,\$17
+- not \$1,\$18
+- jsr \$26,printf
+- ldgp \$29,0(\$26)
+- mov 0,\$16
+- jsr \$26,exit
+- .end main
+-EOF
+- eval $set_cc_for_build
+- $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
+- if test "$?" = 0 ; then
+- case `./$dummy` in
+- 0-0)
+- UNAME_MACHINE="alpha"
+- ;;
+- 1-0)
+- UNAME_MACHINE="alphaev5"
+- ;;
+- 1-1)
+- UNAME_MACHINE="alphaev56"
+- ;;
+- 1-101)
+- UNAME_MACHINE="alphapca56"
+- ;;
+- 2-303)
+- UNAME_MACHINE="alphaev6"
+- ;;
+- 2-307)
+- UNAME_MACHINE="alphaev67"
+- ;;
+- 2-1307)
+- UNAME_MACHINE="alphaev68"
+- ;;
+- esac
+- fi
+- rm -f $dummy.s $dummy
+- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
++ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ exit 0 ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+@@ -295,6 +319,12 @@
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+ exit 0 ;;
++ *:z/VM:*:*)
++ echo s390-ibm-zvmoe
++ exit 0 ;;
++ *:OS400:*:*)
++ echo powerpc-ibm-os400
++ exit 0 ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+ exit 0;;
+@@ -312,6 +342,13 @@
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit 0 ;;
++ DRS?6000:unix:4.0:6*)
++ echo sparc-icl-nx6
++ exit 0 ;;
++ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
++ case `/usr/bin/uname -p` in
++ sparc) echo sparc-icl-nx7 && exit 0 ;;
++ esac ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+@@ -340,7 +377,7 @@
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit 0 ;;
+ sun*:*:4.2BSD:*)
+- UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
++ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+@@ -380,6 +417,9 @@
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit 0 ;;
++ m68k:machten:*:*)
++ echo m68k-apple-machten${UNAME_RELEASE}
++ exit 0 ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+ exit 0 ;;
+@@ -418,15 +458,20 @@
+ exit (-1);
+ }
+ EOF
+- $CC_FOR_BUILD $dummy.c -o $dummy \
+- && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+- && rm -f $dummy.c $dummy && exit 0
+- rm -f $dummy.c $dummy
++ $CC_FOR_BUILD -o $dummy $dummy.c \
++ && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
++ && exit 0
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit 0 ;;
+ Motorola:PowerMAX_OS:*:*)
+ echo powerpc-motorola-powermax
+ exit 0 ;;
++ Motorola:*:4.3:PL8-*)
++ echo powerpc-harris-powermax
++ exit 0 ;;
++ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
++ echo powerpc-harris-powermax
++ exit 0 ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit 0 ;;
+@@ -499,8 +544,7 @@
+ exit(0);
+ }
+ EOF
+- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
+- rm -f $dummy.c $dummy
++ $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+ echo rs6000-ibm-aix3.2.5
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+@@ -509,7 +553,7 @@
+ fi
+ exit 0 ;;
+ *:AIX:*:[45])
+- IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'`
++ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+@@ -598,11 +642,21 @@
+ exit (0);
+ }
+ EOF
+- (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null) && HP_ARCH=`./$dummy`
+- if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi
+- rm -f $dummy.c $dummy
++ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
++ test -z "$HP_ARCH" && HP_ARCH=hppa
+ fi ;;
+ esac
++ if [ ${HP_ARCH} = "hppa2.0w" ]
++ then
++ # avoid double evaluation of $set_cc_for_build
++ test -n "$CC_FOR_BUILD" || eval $set_cc_for_build
++ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null
++ then
++ HP_ARCH="hppa2.0w"
++ else
++ HP_ARCH="hppa64"
++ fi
++ fi
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit 0 ;;
+ ia64:HP-UX:*:*)
+@@ -636,8 +690,7 @@
+ exit (0);
+ }
+ EOF
+- $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0
+- rm -f $dummy.c $dummy
++ $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0
+ echo unknown-hitachi-hiuxwe2
+ exit 0 ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+@@ -683,9 +736,6 @@
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit 0 ;;
+- CRAY*X-MP:*:*:*)
+- echo xmp-cray-unicos
+- exit 0 ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+@@ -698,24 +748,26 @@
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+- CRAY*T3D:*:*:*)
+- echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+- exit 0 ;;
+ CRAY*T3E:*:*:*)
+ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit 0 ;;
+- CRAY-2:*:*:*)
+- echo cray2-cray-unicos
+- exit 0 ;;
++ *:UNICOS/mp:*:*)
++ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
++ exit 0 ;;
+ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit 0 ;;
++ 5000:UNIX_System_V:4.*:*)
++ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
++ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
++ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
++ exit 0 ;;
+ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+@@ -737,18 +789,24 @@
+ i*:PW*:*)
+ echo ${UNAME_MACHINE}-pc-pw32
+ exit 0 ;;
+- x86:Interix*:3*)
+- echo i386-pc-interix3
++ x86:Interix*:[34]*)
++ echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
++ exit 0 ;;
++ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
++ echo i${UNAME_MACHINE}-pc-mks
+ exit 0 ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+- echo i386-pc-interix
++ echo i586-pc-interix
+ exit 0 ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+ exit 0 ;;
++ amd64:CYGWIN*:*:*)
++ echo x86_64-unknown-cygwin
++ exit 0 ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+ exit 0 ;;
+@@ -756,16 +814,33 @@
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ *:GNU:*:*)
++ # the GNU system
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit 0 ;;
++ *:GNU/*:*:*)
++ # other systems with GNU libc and userland
++ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
++ exit 0 ;;
+ i*86:Minix:*:*)
+ echo ${UNAME_MACHINE}-pc-minix
+ exit 0 ;;
+ arm*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
++ cris:Linux:*:*)
++ echo cris-axis-linux-gnu
++ exit 0 ;;
++ crisv32:Linux:*:*)
++ echo crisv32-axis-linux-gnu
++ exit 0 ;;
++ frv:Linux:*:*)
++ echo frv-unknown-linux-gnu
++ exit 0 ;;
+ ia64:Linux:*:*)
+- echo ${UNAME_MACHINE}-unknown-linux
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit 0 ;;
++ m32r*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+ m68*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+@@ -776,19 +851,37 @@
+ #undef CPU
+ #undef mips
+ #undef mipsel
+- #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+- CPU=mipsel
++ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
++ CPU=mipsel
+ #else
+- #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
++ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=mips
+ #else
+ CPU=
+ #endif
+- #endif
++ #endif
++EOF
++ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
++ test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
++ ;;
++ mips64:Linux:*:*)
++ eval $set_cc_for_build
++ sed 's/^ //' << EOF >$dummy.c
++ #undef CPU
++ #undef mips64
++ #undef mips64el
++ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
++ CPU=mips64el
++ #else
++ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
++ CPU=mips64
++ #else
++ CPU=
++ #endif
++ #endif
+ EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+- rm -f $dummy.c
+- test x"${CPU}" != x && echo "${CPU}-pc-linux-gnu" && exit 0
++ test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0
+ ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-gnu
+@@ -824,6 +917,9 @@
+ s390:Linux:*:* | s390x:Linux:*:*)
+ echo ${UNAME_MACHINE}-ibm-linux
+ exit 0 ;;
++ sh64*:Linux:*:*)
++ echo ${UNAME_MACHINE}-unknown-linux-gnu
++ exit 0 ;;
+ sh*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
+@@ -837,7 +933,8 @@
+ # The BFD linker knows what the default object file format is, so
+ # first see if it will tell us. cd to the root directory to prevent
+ # problems with other programs or directories called `ld' in the path.
+- ld_supported_targets=`cd /; ld --help 2>&1 \
++ # Set LC_ALL=C to ensure ld outputs messages in English.
++ ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
+ | sed -ne '/supported targets:/!d
+ s/[ ][ ]*/ /g
+ s/.*supported targets: *//
+@@ -849,7 +946,7 @@
+ ;;
+ a.out-i386-linux)
+ echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+- exit 0 ;;
++ exit 0 ;;
+ coff-i386)
+ echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+ exit 0 ;;
+@@ -874,11 +971,17 @@
+ LIBC=gnulibc1
+ # endif
+ #else
++ #ifdef __INTEL_COMPILER
++ LIBC=gnu
++ #else
+ LIBC=gnuaout
+ #endif
++ #endif
++ #ifdef __dietlibc__
++ LIBC=dietlibc
++ #endif
+ EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+- rm -f $dummy.c
+ test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
+ test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0
+ ;;
+@@ -896,6 +999,26 @@
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit 0 ;;
++ i*86:OS/2:*:*)
++ # If we were able to find `uname', then EMX Unix compatibility
++ # is probably installed.
++ echo ${UNAME_MACHINE}-pc-os2-emx
++ exit 0 ;;
++ i*86:XTS-300:*:STOP)
++ echo ${UNAME_MACHINE}-unknown-stop
++ exit 0 ;;
++ i*86:atheos:*:*)
++ echo ${UNAME_MACHINE}-unknown-atheos
++ exit 0 ;;
++ i*86:syllable:*:*)
++ echo ${UNAME_MACHINE}-pc-syllable
++ exit 0 ;;
++ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
++ echo i386-unknown-lynxos${UNAME_RELEASE}
++ exit 0 ;;
++ i*86:*DOS:*:*)
++ echo ${UNAME_MACHINE}-pc-msdosdjgpp
++ exit 0 ;;
+ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+@@ -917,22 +1040,19 @@
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+- UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+- (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+- (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
++ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
++ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
++ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+- (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
++ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+ && UNAME_MACHINE=i686
+- (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
++ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+ exit 0 ;;
+- i*86:*DOS:*:*)
+- echo ${UNAME_MACHINE}-pc-msdosdjgpp
+- exit 0 ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+@@ -956,9 +1076,15 @@
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit 0 ;;
+- M68*:*:R3V[567]*:*)
++ mc68k:UNIX:SYSTEM5:3.51m)
++ echo m68k-convergent-sysv
++ exit 0 ;;
++ M680?0:D-NIX:5.3:*)
++ echo m68k-diab-dnix
++ exit 0 ;;
++ M68*:*:R3V[5678]*:*)
+ test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+- 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0)
++ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+@@ -975,9 +1101,6 @@
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit 0 ;;
+- i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+- echo i386-unknown-lynxos${UNAME_RELEASE}
+- exit 0 ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+@@ -1017,6 +1140,10 @@
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit 0 ;;
++ i*86:VOS:*:*)
++ # From Paul.Green@stratus.com.
++ echo ${UNAME_MACHINE}-stratus-vos
++ exit 0 ;;
+ *:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo hppa1.1-stratus-vos
+@@ -1049,6 +1176,9 @@
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+ exit 0 ;;
++ SX-6:SUPER-UX:*:*)
++ echo sx6-nec-superux${UNAME_RELEASE}
++ exit 0 ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit 0 ;;
+@@ -1056,18 +1186,28 @@
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ exit 0 ;;
+ *:Darwin:*:*)
+- echo `uname -p`-apple-darwin${UNAME_RELEASE}
++ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
++ case $UNAME_PROCESSOR in
++ *86) UNAME_PROCESSOR=i686 ;;
++ unknown) UNAME_PROCESSOR=powerpc ;;
++ esac
++ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ exit 0 ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+- if test "${UNAME_MACHINE}" = "x86pc"; then
++ UNAME_PROCESSOR=`uname -p`
++ if test "$UNAME_PROCESSOR" = "x86"; then
++ UNAME_PROCESSOR=i386
+ UNAME_MACHINE=pc
+ fi
+- echo `uname -p`-${UNAME_MACHINE}-nto-qnx
++ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+ exit 0 ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit 0 ;;
+- NSR-[GKLNPTVW]:NONSTOP_KERNEL:*:*)
++ NSE-?:NONSTOP_KERNEL:*:*)
++ echo nse-tandem-nsk${UNAME_RELEASE}
++ exit 0 ;;
++ NSR-?:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+ exit 0 ;;
+ *:NonStop-UX:*:*)
+@@ -1090,11 +1230,6 @@
+ fi
+ echo ${UNAME_MACHINE}-unknown-plan9
+ exit 0 ;;
+- i*86:OS/2:*:*)
+- # If we were able to find `uname', then EMX Unix compatibility
+- # is probably installed.
+- echo ${UNAME_MACHINE}-pc-os2-emx
+- exit 0 ;;
+ *:TOPS-10:*:*)
+ echo pdp10-unknown-tops10
+ exit 0 ;;
+@@ -1113,11 +1248,21 @@
+ *:ITS:*:*)
+ echo pdp10-unknown-its
+ exit 0 ;;
+- i*86:XTS-300:*:STOP)
+- echo ${UNAME_MACHINE}-unknown-stop
++ SEI:*:*:SEIUX)
++ echo mips-sei-seiux${UNAME_RELEASE}
+ exit 0 ;;
+- i*86:atheos:*:*)
+- echo ${UNAME_MACHINE}-unknown-atheos
++ *:DragonFly:*:*)
++ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
++ exit 0 ;;
++ *:*VMS:*:*)
++ UNAME_MACHINE=`(uname -p) 2>/dev/null`
++ case "${UNAME_MACHINE}" in
++ A*) echo alpha-dec-vms && exit 0 ;;
++ I*) echo ia64-dec-vms && exit 0 ;;
++ V*) echo vax-dec-vms && exit 0 ;;
++ esac ;;
++ *:XENIX:*:SysV)
++ echo i386-pc-xenix
+ exit 0 ;;
+ esac
+
+@@ -1239,8 +1384,7 @@
+ }
+ EOF
+
+-$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0
+-rm -f $dummy.c $dummy
++$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0
+
+ # Apollos put the system type in the environment.
+
+@@ -1279,7 +1423,9 @@
+ the operating system you are using. It is advised that you
+ download the most up to date version of the config scripts from
+
+- ftp://ftp.gnu.org/pub/gnu/config/
++ http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
++and
++ http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
+
+ If the version you run ($0) is already up to date, please
+ send the following data and any information you think might be
+--- openjade1.3-1.3.2.orig/config/configure.in
++++ openjade1.3-1.3.2/config/configure.in
+@@ -1,7 +1,7 @@
+ dnl
+ dnl configure.in
+ dnl
+-AC_REVISION($Id: configure.in,v 1.8.4.2.2.12 2002/12/01 11:53:21 icastle Exp $)
++AC_REVISION($Id: configure.in,v 1.8.4.2.2.11 2002/11/16 18:27:23 icastle Exp $)
+ dnl
+ dnl Process this file with autoconf to produce a configure script.
+ dnl
+@@ -51,9 +51,6 @@
+ /usr/local/include/OpenSP) osplibdir=/usr/local/lib ;;
+ *) osplibdir=/usr/lib ;;
+ esac
+-# On PPC64 libosp is to be found in /usr/lib64; thus
+-# fall back to this directory
+-test -d ${osplibdir}64 && osplibdir=${osplibdir}64
+ AC_MSG_CHECKING(location of OpenSP Library)
+ AC_ARG_ENABLE(splibdir,
+ [ --enable-splibdir=pathlist
+@@ -98,6 +95,7 @@
+ AC_PROG_LN_S
+ AC_PROG_CXX
+ AC_PATH_PROGS(PERL, perl, perl)
++AC_PATH_PROGS(SED, sed, sed)
+ test "$INSTALL" = "./config/install-sh -c" && INSTALL=`pwd`"/config/install-sh -c"
+
+ dnl
+--- openjade1.3-1.3.2.orig/config/config.sub
++++ openjade1.3-1.3.2/config/config.sub
+@@ -1,9 +1,9 @@
+ #! /bin/sh
+ # Configuration validation subroutine script.
+ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+-# 2000, 2001, 2002 Free Software Foundation, Inc.
++# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+-timestamp='2002-01-02'
++timestamp='2005-04-22'
+
+ # This file is (in principle) common to ALL GNU software.
+ # The presence of a machine in this file suggests that SOME GNU software
+@@ -70,7 +70,7 @@
+ version="\
+ GNU config.sub ($timestamp)
+
+-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+ Free Software Foundation, Inc.
+
+ This is free software; see the source for copying conditions. There is NO
+@@ -118,7 +118,8 @@
+ # Here we must recognize all the valid KERNEL-OS combinations.
+ maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+ case $maybe_os in
+- nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-*)
++ nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
++ kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+@@ -144,7 +145,7 @@
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+- -apple | -axis)
++ -apple | -axis | -knuth | -cray)
+ os=
+ basic_machine=$1
+ ;;
+@@ -228,31 +229,47 @@
+ | a29k \
+ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
++ | am33_2.0 \
+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
++ | bfin \
+ | c4x | clipper \
+- | d10v | d30v | dsp16xx \
+- | fr30 \
++ | d10v | d30v | dlx | dsp16xx \
++ | fr30 | frv \
+ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | i370 | i860 | i960 | ia64 \
+- | m32r | m68000 | m68k | m88k | mcore \
+- | mips16 | mips64 | mips64el | mips64orion | mips64orionel \
+- | mips64vr4100 | mips64vr4100el | mips64vr4300 \
+- | mips64vr4300el | mips64vr5000 | mips64vr5000el \
+- | mipsbe | mipseb | mipsel | mipsle | mipstx39 | mipstx39el \
+- | mipsisa32 \
++ | ip2k | iq2000 \
++ | m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
++ | mips | mipsbe | mipseb | mipsel | mipsle \
++ | mips16 \
++ | mips64 | mips64el \
++ | mips64vr | mips64vrel \
++ | mips64orion | mips64orionel \
++ | mips64vr4100 | mips64vr4100el \
++ | mips64vr4300 | mips64vr4300el \
++ | mips64vr5000 | mips64vr5000el \
++ | mipsisa32 | mipsisa32el \
++ | mipsisa32r2 | mipsisa32r2el \
++ | mipsisa64 | mipsisa64el \
++ | mipsisa64r2 | mipsisa64r2el \
++ | mipsisa64sb1 | mipsisa64sb1el \
++ | mipsisa64sr71k | mipsisa64sr71kel \
++ | mipstx39 | mipstx39el \
+ | mn10200 | mn10300 \
++ | msp430 \
+ | ns16k | ns32k \
+- | openrisc \
++ | openrisc | or32 \
+ | pdp10 | pdp11 | pj | pjl \
+ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+ | pyramid \
+- | sh | sh[34] | sh[34]eb | shbe | shle \
+- | sparc | sparc64 | sparclet | sparclite | sparcv9 | sparcv9b \
++ | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
++ | sh64 | sh64le \
++ | sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
++ | sparcv8 | sparcv9 | sparcv9b \
+ | strongarm \
+- | tahoe | thumb | tic80 | tron \
++ | tahoe | thumb | tic4x | tic80 | tron \
+ | v850 | v850e \
+ | we32k \
+- | x86 | xscale | xstormy16 | xtensa \
++ | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
+ | z8k)
+ basic_machine=$basic_machine-unknown
+ ;;
+@@ -281,38 +298,56 @@
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+- | arm-* | armbe-* | armle-* | armv*-* \
++ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
+ | avr-* \
+- | bs2000-* \
+- | c[123]* | c30-* | [cjt]90-* | c54x-* \
+- | clipper-* | cray2-* | cydra-* \
+- | d10v-* | d30v-* \
++ | bfin-* | bs2000-* \
++ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
++ | clipper-* | craynv-* | cydra-* \
++ | d10v-* | d30v-* | dlx-* \
+ | elxsi-* \
+- | f30[01]-* | f700-* | fr30-* | fx80-* \
++ | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+ | h8300-* | h8500-* \
+ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+ | i*86-* | i860-* | i960-* | ia64-* \
+- | m32r-* \
+- | m68000-* | m680[01234]0-* | m68360-* | m683?2-* | m68k-* \
+- | m88110-* | m88k-* | mcore-* \
+- | mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \
+- | mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \
+- | mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipseb-* \
+- | mipsle-* | mipsel-* | mipstx39-* | mipstx39el-* \
++ | ip2k-* | iq2000-* \
++ | m32r-* | m32rle-* \
++ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
++ | m88110-* | m88k-* | maxq-* | mcore-* \
++ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
++ | mips16-* \
++ | mips64-* | mips64el-* \
++ | mips64vr-* | mips64vrel-* \
++ | mips64orion-* | mips64orionel-* \
++ | mips64vr4100-* | mips64vr4100el-* \
++ | mips64vr4300-* | mips64vr4300el-* \
++ | mips64vr5000-* | mips64vr5000el-* \
++ | mipsisa32-* | mipsisa32el-* \
++ | mipsisa32r2-* | mipsisa32r2el-* \
++ | mipsisa64-* | mipsisa64el-* \
++ | mipsisa64r2-* | mipsisa64r2el-* \
++ | mipsisa64sb1-* | mipsisa64sb1el-* \
++ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
++ | mipstx39-* | mipstx39el-* \
++ | mmix-* \
++ | msp430-* \
+ | none-* | np1-* | ns16k-* | ns32k-* \
+ | orion-* \
+ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+ | pyramid-* \
+ | romp-* | rs6000-* \
+- | sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* \
+- | sparc-* | sparc64-* | sparc86x-* | sparclite-* \
+- | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* \
+- | t3e-* | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \
++ | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
++ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
++ | sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
++ | sparclite-* \
++ | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
++ | tahoe-* | thumb-* \
++ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
++ | tron-* \
+ | v850-* | v850e-* | vax-* \
+ | we32k-* \
+- | x86-* | x86_64-* | xmp-* | xps100-* | xscale-* | xstormy16-* \
+- | xtensa-* \
++ | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
++ | xstormy16-* | xtensa-* \
+ | ymp-* \
+ | z8k-*)
+ ;;
+@@ -332,6 +367,9 @@
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
++ abacus)
++ basic_machine=abacus-unknown
++ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+@@ -346,6 +384,12 @@
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
++ amd64)
++ basic_machine=x86_64-pc
++ ;;
++ amd64-*)
++ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+@@ -377,6 +421,10 @@
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
++ c90)
++ basic_machine=c90-cray
++ os=-unicos
++ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+@@ -397,24 +445,31 @@
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+- cray | ymp)
+- basic_machine=ymp-cray
++ cray | j90)
++ basic_machine=j90-cray
+ os=-unicos
+ ;;
+- cray2)
+- basic_machine=cray2-cray
+- os=-unicos
++ craynv)
++ basic_machine=craynv-cray
++ os=-unicosmp
+ ;;
+- [cjt]90)
+- basic_machine=${basic_machine}-cray
+- os=-unicos
++ cr16c)
++ basic_machine=cr16c-unknown
++ os=-elf
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
++ crisv32 | crisv32-* | etraxfs*)
++ basic_machine=crisv32-axis
++ ;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
++ crx)
++ basic_machine=crx-unknown
++ os=-elf
++ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+@@ -437,6 +492,10 @@
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
++ djgpp)
++ basic_machine=i586-pc
++ os=-msdosdjgpp
++ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+@@ -609,24 +668,12 @@
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+- mipsel*-linux*)
+- basic_machine=mipsel-unknown
+- os=-linux-gnu
+- ;;
+- mips*-linux*)
+- basic_machine=mips-unknown
+- os=-linux-gnu
+- ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+- mmix*)
+- basic_machine=mmix-knuth
+- os=-mmixware
+- ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+@@ -714,6 +761,14 @@
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
++ or32 | or32-*)
++ basic_machine=or32-unknown
++ os=-coff
++ ;;
++ os400)
++ basic_machine=powerpc-ibm
++ os=-os400
++ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+@@ -736,49 +791,55 @@
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+- pc532 | pc532-*)
++ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pentium | p5 | k5 | k6 | nexgen | viac3)
+ basic_machine=i586-pc
+ ;;
+- pentiumpro | p6 | 6x86 | athlon)
++ pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ basic_machine=i686-pc
+ ;;
+- pentiumii | pentium2)
++ pentiumii | pentium2 | pentiumiii | pentium3)
+ basic_machine=i686-pc
+ ;;
++ pentium4)
++ basic_machine=i786-pc
++ ;;
+ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+- pentiumii-* | pentium2-*)
++ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
++ pentium4-*)
++ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
++ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=power-ibm
+ ;;
+ ppc) basic_machine=powerpc-unknown
+- ;;
++ ;;
+ ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+- ;;
++ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64) basic_machine=powerpc64-unknown
+- ;;
++ ;;
+ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ basic_machine=powerpc64le-unknown
+- ;;
++ ;;
+ ppc64le-* | powerpc64little-*)
+ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+@@ -809,6 +870,16 @@
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
++ sb1)
++ basic_machine=mipsisa64sb1-unknown
++ ;;
++ sb1el)
++ basic_machine=mipsisa64sb1el-unknown
++ ;;
++ sei)
++ basic_machine=mips-sei
++ os=-seiux
++ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+@@ -816,6 +887,9 @@
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
++ sh64)
++ basic_machine=sh64-unknown
++ ;;
+ sparclite-wrs | simso-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+@@ -883,13 +957,25 @@
+ os=-dynix
+ ;;
+ t3e)
+- basic_machine=t3e-cray
++ basic_machine=alphaev5-cray
++ os=-unicos
++ ;;
++ t90)
++ basic_machine=t90-cray
+ os=-unicos
+ ;;
+ tic54x | c54x*)
+ basic_machine=tic54x-unknown
+ os=-coff
+ ;;
++ tic55x | c55x*)
++ basic_machine=tic55x-unknown
++ os=-coff
++ ;;
++ tic6x | c6x*)
++ basic_machine=tic6x-unknown
++ os=-coff
++ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+@@ -903,6 +989,10 @@
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
++ tpf)
++ basic_machine=s390x-ibm
++ os=-tpf
++ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+@@ -924,8 +1014,8 @@
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+- basic_machine=f301-fujitsu
+- ;;
++ basic_machine=f301-fujitsu
++ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+@@ -946,17 +1036,17 @@
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+- windows32)
+- basic_machine=i386-pc
+- os=-windows32-msvcrt
+- ;;
+- xmp)
+- basic_machine=xmp-cray
+- os=-unicos
++ xbox)
++ basic_machine=i686-pc
++ os=-mingw32
+ ;;
+- xps | xps100)
++ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
++ ymp)
++ basic_machine=ymp-cray
++ os=-unicos
++ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+@@ -977,16 +1067,12 @@
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+- mips)
+- if [ x$os = x-linux-gnu ]; then
+- basic_machine=mips-unknown
+- else
+- basic_machine=mips-mips
+- fi
+- ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
++ mmix)
++ basic_machine=mmix-knuth
++ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+@@ -1003,13 +1089,16 @@
+ we32k)
+ basic_machine=we32k-att
+ ;;
+- sh3 | sh4 | sh3eb | sh4eb)
++ sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele)
+ basic_machine=sh-unknown
+ ;;
+- sparc | sparcv9 | sparcv9b)
++ sh64)
++ basic_machine=sh64-unknown
++ ;;
++ sparc | sparcv8 | sparcv9 | sparcv9b)
+ basic_machine=sparc-sun
+ ;;
+- cydra)
++ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+@@ -1024,10 +1113,6 @@
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+- c4x*)
+- basic_machine=c4x-none
+- os=-coff
+- ;;
+ *-unknown)
+ # Make sure to match an already-canonicalized machine name.
+ ;;
+@@ -1083,17 +1168,20 @@
+ | -aos* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+- | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
+- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
++ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
++ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
++ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -chorusos* | -chorusrdb* \
+ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+- | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \
++ | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
++ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+- | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* | -morphos*)
++ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
++ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
++ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+@@ -1105,8 +1193,10 @@
+ ;;
+ esac
+ ;;
++ -nto-qnx*)
++ ;;
+ -nto*)
+- os=-nto-qnx
++ os=`echo $os | sed -e 's|nto|nto-qnx|'`
+ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* \
+@@ -1115,6 +1205,9 @@
+ -mac*)
+ os=`echo $os | sed -e 's|mac|macos|'`
+ ;;
++ -linux-dietlibc)
++ os=-linux-dietlibc
++ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+@@ -1127,6 +1220,9 @@
+ -opened*)
+ os=-openedition
+ ;;
++ -os400*)
++ os=-os400
++ ;;
+ -wince*)
+ os=-wince
+ ;;
+@@ -1148,14 +1244,20 @@
+ -atheos*)
+ os=-atheos
+ ;;
++ -syllable*)
++ os=-syllable
++ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
++ -nova*)
++ os=-rtmk-nova
++ ;;
+ -ns2 )
+- os=-nextstep2
++ os=-nextstep2
+ ;;
+ -nsk*)
+ os=-nsk
+@@ -1167,6 +1269,9 @@
+ -sinix*)
+ os=-sysv4
+ ;;
++ -tpf*)
++ os=-tpf
++ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+@@ -1194,8 +1299,17 @@
+ -xenix)
+ os=-xenix
+ ;;
+- -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+- os=-mint
++ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
++ os=-mint
++ ;;
++ -aros*)
++ os=-aros
++ ;;
++ -kaos*)
++ os=-kaos
++ ;;
++ -zvmoe)
++ os=-zvmoe
+ ;;
+ -none)
+ ;;
+@@ -1228,11 +1342,14 @@
+ arm*-semi)
+ os=-aout
+ ;;
++ c4x-* | tic4x-*)
++ os=-coff
++ ;;
+ # This must come before the *-dec entry.
+ pdp10-*)
+ os=-tops20
+ ;;
+- pdp11-*)
++ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+@@ -1259,6 +1376,9 @@
+ mips*-*)
+ os=-elf
+ ;;
++ or32-*)
++ os=-coff
++ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+@@ -1271,6 +1391,9 @@
+ *-ibm)
+ os=-aix
+ ;;
++ *-knuth)
++ os=-mmixware
++ ;;
+ *-wec)
+ os=-proelf
+ ;;
+@@ -1322,19 +1445,19 @@
+ *-next)
+ os=-nextstep3
+ ;;
+- *-gould)
++ *-gould)
+ os=-sysv
+ ;;
+- *-highlevel)
++ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+- *-sgi)
++ *-sgi)
+ os=-irix
+ ;;
+- *-siemens)
++ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+@@ -1403,10 +1526,16 @@
+ -mvs* | -opened*)
+ vendor=ibm
+ ;;
++ -os400*)
++ vendor=ibm
++ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+- -vxsim* | -vxworks*)
++ -tpf*)
++ vendor=ibm
++ ;;
++ -vxsim* | -vxworks* | -windiss*)
+ vendor=wrs
+ ;;
+ -aux*)
+--- openjade1.3-1.3.2.orig/config/libtool
++++ openjade1.3-1.3.2/config/libtool
+@@ -0,0 +1,5229 @@
++#! /bin/sh
++
++# libtool - Provide generalized library-building support services.
++# Generated automatically by (GNU openjade 1.3.2)
++# NOTE: Changes made to this file will be lost: look at ltmain.sh.
++#
++# Copyright (C) 1996-2000 Free Software Foundation, Inc.
++# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
++#
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful, but
++# WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++# General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++#
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++# Sed that helps us avoid accidentally triggering echo(1) options like -n.
++Xsed="sed -e s/^X//"
++
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
++
++# ### BEGIN LIBTOOL CONFIG
++
++# Libtool was configured on host ml330:
++
++# Shell to use when invoking shell scripts.
++SHELL="/bin/sh"
++
++# Whether or not to build shared libraries.
++build_libtool_libs=no
++
++# Whether or not to add -lc for building shared libraries.
++build_libtool_need_lc=yes
++
++# Whether or not to build static libraries.
++build_old_libs=yes
++
++# Whether or not to optimize for fast installation.
++fast_install=needless
++
++# The host system.
++host_alias=
++host=i686-pc-linux-gnu
++
++# An echo program that does not interpret backslashes.
++echo="echo"
++
++# The archiver.
++AR="ar"
++AR_FLAGS="cru"
++
++# The default C compiler.
++CC="gcc"
++
++# Is the compiler the GNU C compiler?
++with_gcc=yes
++
++# The linker used to build libraries.
++LD="/usr/bin/ld"
++
++# Whether we need hard or soft links.
++LN_S="ln -s"
++
++# A BSD-compatible nm program.
++NM="/usr/bin/nm -B"
++
++# A symbol stripping program
++STRIP=strip
++
++# Used to examine libraries when file_magic_cmd begins "file"
++MAGIC_CMD=file
++
++# Used on cygwin: DLL creation program.
++DLLTOOL="dlltool"
++
++# Used on cygwin: object dumper.
++OBJDUMP="objdump"
++
++# Used on cygwin: assembler.
++AS="as"
++
++# The name of the directory that contains temporary libtool files.
++objdir=.libs
++
++# How to create reloadable object files.
++reload_flag=" -r"
++reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs"
++
++# How to pass a linker flag through the compiler.
++wl="-Wl,"
++
++# Object file suffix (normally "o").
++objext="o"
++
++# Old archive suffix (normally "a").
++libext="a"
++
++# Executable file suffix (normally "").
++exeext=""
++
++# Additional compiler flags for building library objects.
++pic_flag=" -fPIC"
++pic_mode=default
++
++# Does compiler simultaneously support -c and -o options?
++compiler_c_o="no"
++
++# Can we write directly to a .lo ?
++compiler_o_lo="no"
++
++# Must we lock files when doing compilation ?
++need_locks="yes"
++
++# Do we need the lib prefix for modules?
++need_lib_prefix=no
++
++# Do we need a version for libraries?
++need_version=no
++
++# Whether dlopen is supported.
++dlopen_support=unknown
++
++# Whether dlopen of programs is supported.
++dlopen_self=unknown
++
++# Whether dlopen of statically linked programs is supported.
++dlopen_self_static=unknown
++
++# Compiler flag to prevent dynamic linking.
++link_static_flag="-static"
++
++# Compiler flag to turn off builtin functions.
++no_builtin_flag=" -fno-builtin -fno-rtti -fno-exceptions"
++
++# Compiler flag to allow reflexive dlopens.
++export_dynamic_flag_spec="\${wl}--export-dynamic"
++
++# Compiler flag to generate shared objects directly from archives.
++whole_archive_flag_spec="\${wl}--whole-archive\$convenience \${wl}--no-whole-archive"
++
++# Compiler flag to generate thread-safe objects.
++thread_safe_flag_spec=""
++
++# Library versioning type.
++version_type=linux
++
++# Format of library name prefix.
++libname_spec="lib\$name"
++
++# List of archive names. First name is the real one, the rest are links.
++# The last name is the one that the linker finds with -lNAME.
++library_names_spec="\${libname}\${release}.so\$versuffix \${libname}\${release}.so\$major \$libname.so"
++
++# The coded name of the library, if different from the real name.
++soname_spec="\${libname}\${release}.so\$major"
++
++# Commands used to build and install an old-style archive.
++RANLIB="ranlib"
++old_archive_cmds="\$AR \$AR_FLAGS \$oldlib\$oldobjs\$old_deplibs~\$RANLIB \$oldlib"
++old_postinstall_cmds="\$RANLIB \$oldlib~chmod 644 \$oldlib"
++old_postuninstall_cmds=""
++
++# Create an old-style archive from a shared archive.
++old_archive_from_new_cmds=""
++
++# Create a temporary old-style archive to link instead of a shared archive.
++old_archive_from_expsyms_cmds=""
++
++# Commands used to build and install a shared archive.
++archive_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname -o \$lib"
++archive_expsym_cmds="\$CC -shared \$libobjs \$deplibs \$compiler_flags \${wl}-soname \$wl\$soname \${wl}-retain-symbols-file \$wl\$export_symbols -o \$lib"
++postinstall_cmds=""
++postuninstall_cmds=""
++
++# Commands to strip libraries.
++old_striplib="strip --strip-debug"
++striplib="strip --strip-unneeded"
++
++# Method to check whether dependent libraries are shared objects.
++deplibs_check_method="pass_all"
++
++# Command to use when deplibs_check_method == file_magic.
++file_magic_cmd="\$MAGIC_CMD"
++
++# Flag that allows shared libraries with undefined symbols to be built.
++allow_undefined_flag=""
++
++# Flag that forces no undefined symbols.
++no_undefined_flag=""
++
++# Commands used to finish a libtool library installation in a directory.
++finish_cmds="PATH=\\\"\\\$PATH:/sbin\\\" ldconfig -n \$libdir"
++
++# Same as above, but a single script fragment to be evaled but not shown.
++finish_eval=""
++
++# Take the output of nm and produce a listing of raw symbols and C names.
++global_symbol_pipe="sed -n -e 's/^.*[ ]\\([ABCDGISTW][ABCDGISTW]*\\)[ ][ ]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2\\3 \\3/p'"
++
++# Transform the output of nm in a proper C declaration
++global_symbol_to_cdecl="sed -n -e 's/^. .* \\(.*\\)\$/extern char \\1;/p'"
++
++# This is the shared library runtime path variable.
++runpath_var=LD_RUN_PATH
++
++# This is the shared library path variable.
++shlibpath_var=LD_LIBRARY_PATH
++
++# Is shlibpath searched before the hard-coded library search path?
++shlibpath_overrides_runpath=no
++
++# How to hardcode a shared library path into an executable.
++hardcode_action=immediate
++
++# Whether we should hardcode library paths into libraries.
++hardcode_into_libs=yes
++
++# Flag to hardcode $libdir into a binary during linking.
++# This must work even if $libdir does not exist.
++hardcode_libdir_flag_spec="\${wl}--rpath \${wl}\$libdir"
++
++# Whether we need a single -rpath flag with a separated argument.
++hardcode_libdir_separator=""
++
++# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
++# resulting binary.
++hardcode_direct=no
++
++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
++# resulting binary.
++hardcode_minus_L=no
++
++# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
++# the resulting binary.
++hardcode_shlibpath_var=unsupported
++
++# Variables whose values should be saved in libtool wrapper scripts and
++# restored at relink time.
++variables_saved_for_relink="PATH LD_LIBRARY_PATH LD_RUN_PATH GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
++
++# Whether libtool must link a program against all its dependency libraries.
++link_all_deplibs=unknown
++
++# Compile-time system search path for libraries
++sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
++
++# Run-time system search path for libraries
++sys_lib_dlsearch_path_spec="/lib /usr/lib"
++
++# Fix the shell variable $srcfile for the compiler.
++fix_srcfile_path=""
++
++# Set to yes if exported symbols are required.
++always_export_symbols=no
++
++# The commands to list exported symbols.
++export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | sed 's/.* //' | sort | uniq > \$export_symbols"
++
++# The commands to extract the exported symbol list from a shared archive.
++extract_expsyms_cmds=""
++
++# Symbols that should not be listed in the preloaded symbols.
++exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
++
++# Symbols that must always be exported.
++include_expsyms=""
++
++# ### END LIBTOOL CONFIG
++
++# ltmain.sh - Provide generalized library-building support services.
++# NOTE: Changing this file will not affect anything until you rerun configure.
++#
++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
++# Free Software Foundation, Inc.
++# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
++#
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful, but
++# WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
++# General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
++#
++# As a special exception to the GNU General Public License, if you
++# distribute this file as part of a program that contains a
++# configuration script generated by Autoconf, you may include it under
++# the same distribution terms that you use for the rest of that program.
++
++# Check that we have a working $echo.
++if test "X$1" = X--no-reexec; then
++ # Discard the --no-reexec flag, and continue.
++ shift
++elif test "X$1" = X--fallback-echo; then
++ # Avoid inline document here, it may be left over
++ :
++elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
++ # Yippee, $echo works!
++ :
++else
++ # Restart under the correct shell, and then maybe $echo will work.
++ exec $SHELL "$0" --no-reexec ${1+"$@"}
++fi
++
++if test "X$1" = X--fallback-echo; then
++ # used as fallback echo
++ shift
++ cat <<EOF
++$*
++EOF
++ exit 0
++fi
++
++# The name of this program.
++progname=`$echo "$0" | sed 's%^.*/%%'`
++modename="$progname"
++
++# Constants.
++PROGRAM=ltmain.sh
++PACKAGE=libtool
++VERSION=1.4
++TIMESTAMP=" (1.920 2001/04/24 23:26:18)"
++
++default_mode=
++help="Try \`$progname --help' for more information."
++magic="%%%MAGIC variable%%%"
++mkdir="mkdir"
++mv="mv -f"
++rm="rm -f"
++
++# Sed substitution that helps us do robust quoting. It backslashifies
++# metacharacters that are still active within double-quoted strings.
++Xsed='sed -e 1s/^X//'
++sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
++SP2NL='tr \040 \012'
++NL2SP='tr \015\012 \040\040'
++
++# NLS nuisances.
++# Only set LANG and LC_ALL to C if already set.
++# These must not be set unconditionally because not all systems understand
++# e.g. LANG=C (notably SCO).
++# We save the old values to restore during execute mode.
++if test "${LC_ALL+set}" = set; then
++ save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
++fi
++if test "${LANG+set}" = set; then
++ save_LANG="$LANG"; LANG=C; export LANG
++fi
++
++if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
++ echo "$modename: not configured to build any kind of library" 1>&2
++ echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
++ exit 1
++fi
++
++# Global variables.
++mode=$default_mode
++nonopt=
++prev=
++prevopt=
++run=
++show="$echo"
++show_help=
++execute_dlfiles=
++lo2o="s/\\.lo\$/.${objext}/"
++o2lo="s/\\.${objext}\$/.lo/"
++
++# Parse our command line options once, thoroughly.
++while test $# -gt 0
++do
++ arg="$1"
++ shift
++
++ case $arg in
++ -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
++ *) optarg= ;;
++ esac
++
++ # If the previous option needs an argument, assign it.
++ if test -n "$prev"; then
++ case $prev in
++ execute_dlfiles)
++ execute_dlfiles="$execute_dlfiles $arg"
++ ;;
++ *)
++ eval "$prev=\$arg"
++ ;;
++ esac
++
++ prev=
++ prevopt=
++ continue
++ fi
++
++ # Have we seen a non-optional argument yet?
++ case $arg in
++ --help)
++ show_help=yes
++ ;;
++
++ --version)
++ echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
++ exit 0
++ ;;
++
++ --config)
++ sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
++ exit 0
++ ;;
++
++ --debug)
++ echo "$progname: enabling shell trace mode"
++ set -x
++ ;;
++
++ --dry-run | -n)
++ run=:
++ ;;
++
++ --features)
++ echo "host: $host"
++ if test "$build_libtool_libs" = yes; then
++ echo "enable shared libraries"
++ else
++ echo "disable shared libraries"
++ fi
++ if test "$build_old_libs" = yes; then
++ echo "enable static libraries"
++ else
++ echo "disable static libraries"
++ fi
++ exit 0
++ ;;
++
++ --finish) mode="finish" ;;
++
++ --mode) prevopt="--mode" prev=mode ;;
++ --mode=*) mode="$optarg" ;;
++
++ --quiet | --silent)
++ show=:
++ ;;
++
++ -dlopen)
++ prevopt="-dlopen"
++ prev=execute_dlfiles
++ ;;
++
++ -*)
++ $echo "$modename: unrecognized option \`$arg'" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ ;;
++
++ *)
++ nonopt="$arg"
++ break
++ ;;
++ esac
++done
++
++if test -n "$prevopt"; then
++ $echo "$modename: option \`$prevopt' requires an argument" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++fi
++
++if test -z "$show_help"; then
++
++ # Infer the operation mode.
++ if test -z "$mode"; then
++ case $nonopt in
++ *cc | *++ | gcc* | *-gcc*)
++ mode=link
++ for arg
++ do
++ case $arg in
++ -c)
++ mode=compile
++ break
++ ;;
++ esac
++ done
++ ;;
++ *db | *dbx | *strace | *truss)
++ mode=execute
++ ;;
++ *install*|cp|mv)
++ mode=install
++ ;;
++ *rm)
++ mode=uninstall
++ ;;
++ *)
++ # If we have no mode, but dlfiles were specified, then do execute mode.
++ test -n "$execute_dlfiles" && mode=execute
++
++ # Just use the default operation mode.
++ if test -z "$mode"; then
++ if test -n "$nonopt"; then
++ $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
++ else
++ $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
++ fi
++ fi
++ ;;
++ esac
++ fi
++
++ # Only execute mode is allowed to have -dlopen flags.
++ if test -n "$execute_dlfiles" && test "$mode" != execute; then
++ $echo "$modename: unrecognized option \`-dlopen'" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ # Change the help message to a mode-specific one.
++ generic_help="$help"
++ help="Try \`$modename --help --mode=$mode' for more information."
++
++ # These modes are in order of execution frequency so that they run quickly.
++ case $mode in
++ # libtool compile mode
++ compile)
++ modename="$modename: compile"
++ # Get the compilation command and the source file.
++ base_compile=
++ prev=
++ lastarg=
++ srcfile="$nonopt"
++ suppress_output=
++
++ user_target=no
++ for arg
++ do
++ case $prev in
++ "") ;;
++ xcompiler)
++ # Aesthetically quote the previous argument.
++ prev=
++ lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
++
++ case $arg in
++ # Double-quote args containing other shell metacharacters.
++ # Many Bourne shells cannot handle close brackets correctly
++ # in scan sets, so we specify it separately.
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ arg="\"$arg\""
++ ;;
++ esac
++
++ # Add the previous argument to base_compile.
++ if test -z "$base_compile"; then
++ base_compile="$lastarg"
++ else
++ base_compile="$base_compile $lastarg"
++ fi
++ continue
++ ;;
++ esac
++
++ # Accept any command-line options.
++ case $arg in
++ -o)
++ if test "$user_target" != "no"; then
++ $echo "$modename: you cannot specify \`-o' more than once" 1>&2
++ exit 1
++ fi
++ user_target=next
++ ;;
++
++ -static)
++ build_old_libs=yes
++ continue
++ ;;
++
++ -prefer-pic)
++ pic_mode=yes
++ continue
++ ;;
++
++ -prefer-non-pic)
++ pic_mode=no
++ continue
++ ;;
++
++ -Xcompiler)
++ prev=xcompiler
++ continue
++ ;;
++
++ -Wc,*)
++ args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
++ lastarg=
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
++ for arg in $args; do
++ IFS="$save_ifs"
++
++ # Double-quote args containing other shell metacharacters.
++ # Many Bourne shells cannot handle close brackets correctly
++ # in scan sets, so we specify it separately.
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ arg="\"$arg\""
++ ;;
++ esac
++ lastarg="$lastarg $arg"
++ done
++ IFS="$save_ifs"
++ lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
++
++ # Add the arguments to base_compile.
++ if test -z "$base_compile"; then
++ base_compile="$lastarg"
++ else
++ base_compile="$base_compile $lastarg"
++ fi
++ continue
++ ;;
++ esac
++
++ case $user_target in
++ next)
++ # The next one is the -o target name
++ user_target=yes
++ continue
++ ;;
++ yes)
++ # We got the output file
++ user_target=set
++ libobj="$arg"
++ continue
++ ;;
++ esac
++
++ # Accept the current argument as the source file.
++ lastarg="$srcfile"
++ srcfile="$arg"
++
++ # Aesthetically quote the previous argument.
++
++ # Backslashify any backslashes, double quotes, and dollar signs.
++ # These are the only characters that are still specially
++ # interpreted inside of double-quoted scrings.
++ lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
++
++ # Double-quote args containing other shell metacharacters.
++ # Many Bourne shells cannot handle close brackets correctly
++ # in scan sets, so we specify it separately.
++ case $lastarg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ lastarg="\"$lastarg\""
++ ;;
++ esac
++
++ # Add the previous argument to base_compile.
++ if test -z "$base_compile"; then
++ base_compile="$lastarg"
++ else
++ base_compile="$base_compile $lastarg"
++ fi
++ done
++
++ case $user_target in
++ set)
++ ;;
++ no)
++ # Get the name of the library object.
++ libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
++ ;;
++ *)
++ $echo "$modename: you must specify a target with \`-o'" 1>&2
++ exit 1
++ ;;
++ esac
++
++ # Recognize several different file suffixes.
++ # If the user specifies -o file.o, it is replaced with file.lo
++ xform='[cCFSfmso]'
++ case $libobj in
++ *.ada) xform=ada ;;
++ *.adb) xform=adb ;;
++ *.ads) xform=ads ;;
++ *.asm) xform=asm ;;
++ *.c++) xform=c++ ;;
++ *.cc) xform=cc ;;
++ *.cpp) xform=cpp ;;
++ *.cxx) xform=cxx ;;
++ *.f90) xform=f90 ;;
++ *.for) xform=for ;;
++ esac
++
++ libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
++
++ case $libobj in
++ *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
++ *)
++ $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
++ exit 1
++ ;;
++ esac
++
++ if test -z "$base_compile"; then
++ $echo "$modename: you must specify a compilation command" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ # Delete any leftover library objects.
++ if test "$build_old_libs" = yes; then
++ removelist="$obj $libobj"
++ else
++ removelist="$libobj"
++ fi
++
++ $run $rm $removelist
++ trap "$run $rm $removelist; exit 1" 1 2 15
++
++ # On Cygwin there's no "real" PIC flag so we must build both object types
++ case $host_os in
++ cygwin* | mingw* | pw32* | os2*)
++ pic_mode=default
++ ;;
++ esac
++ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
++ # non-PIC code in shared libraries is not supported
++ pic_mode=default
++ fi
++
++ # Calculate the filename of the output object if compiler does
++ # not support -o with -c
++ if test "$compiler_c_o" = no; then
++ output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
++ lockfile="$output_obj.lock"
++ removelist="$removelist $output_obj $lockfile"
++ trap "$run $rm $removelist; exit 1" 1 2 15
++ else
++ need_locks=no
++ lockfile=
++ fi
++
++ # Lock this critical section if it is needed
++ # We use this script file to make the link, it avoids creating a new file
++ if test "$need_locks" = yes; then
++ until $run ln "$0" "$lockfile" 2>/dev/null; do
++ $show "Waiting for $lockfile to be removed"
++ sleep 2
++ done
++ elif test "$need_locks" = warn; then
++ if test -f "$lockfile"; then
++ echo "\
++*** ERROR, $lockfile exists and contains:
++`cat $lockfile 2>/dev/null`
++
++This indicates that another process is trying to use the same
++temporary object file, and libtool could not work around it because
++your compiler does not support \`-c' and \`-o' together. If you
++repeat this compilation, it may succeed, by chance, but you had better
++avoid parallel builds (make -j) in this platform, or get a better
++compiler."
++
++ $run $rm $removelist
++ exit 1
++ fi
++ echo $srcfile > "$lockfile"
++ fi
++
++ if test -n "$fix_srcfile_path"; then
++ eval srcfile=\"$fix_srcfile_path\"
++ fi
++
++ # Only build a PIC object if we are building libtool libraries.
++ if test "$build_libtool_libs" = yes; then
++ # Without this assignment, base_compile gets emptied.
++ fbsd_hideous_sh_bug=$base_compile
++
++ if test "$pic_mode" != no; then
++ # All platforms use -DPIC, to notify preprocessed assembler code.
++ command="$base_compile $srcfile $pic_flag -DPIC"
++ else
++ # Don't build PIC code
++ command="$base_compile $srcfile"
++ fi
++ if test "$build_old_libs" = yes; then
++ lo_libobj="$libobj"
++ dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
++ if test "X$dir" = "X$libobj"; then
++ dir="$objdir"
++ else
++ dir="$dir/$objdir"
++ fi
++ libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
++
++ if test -d "$dir"; then
++ $show "$rm $libobj"
++ $run $rm $libobj
++ else
++ $show "$mkdir $dir"
++ $run $mkdir $dir
++ status=$?
++ if test $status -ne 0 && test ! -d $dir; then
++ exit $status
++ fi
++ fi
++ fi
++ if test "$compiler_o_lo" = yes; then
++ output_obj="$libobj"
++ command="$command -o $output_obj"
++ elif test "$compiler_c_o" = yes; then
++ output_obj="$obj"
++ command="$command -o $output_obj"
++ fi
++
++ $run $rm "$output_obj"
++ $show "$command"
++ if $run eval "$command"; then :
++ else
++ test -n "$output_obj" && $run $rm $removelist
++ exit 1
++ fi
++
++ if test "$need_locks" = warn &&
++ test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
++ echo "\
++*** ERROR, $lockfile contains:
++`cat $lockfile 2>/dev/null`
++
++but it should contain:
++$srcfile
++
++This indicates that another process is trying to use the same
++temporary object file, and libtool could not work around it because
++your compiler does not support \`-c' and \`-o' together. If you
++repeat this compilation, it may succeed, by chance, but you had better
++avoid parallel builds (make -j) in this platform, or get a better
++compiler."
++
++ $run $rm $removelist
++ exit 1
++ fi
++
++ # Just move the object if needed, then go on to compile the next one
++ if test x"$output_obj" != x"$libobj"; then
++ $show "$mv $output_obj $libobj"
++ if $run $mv $output_obj $libobj; then :
++ else
++ error=$?
++ $run $rm $removelist
++ exit $error
++ fi
++ fi
++
++ # If we have no pic_flag, then copy the object into place and finish.
++ if (test -z "$pic_flag" || test "$pic_mode" != default) &&
++ test "$build_old_libs" = yes; then
++ # Rename the .lo from within objdir to obj
++ if test -f $obj; then
++ $show $rm $obj
++ $run $rm $obj
++ fi
++
++ $show "$mv $libobj $obj"
++ if $run $mv $libobj $obj; then :
++ else
++ error=$?
++ $run $rm $removelist
++ exit $error
++ fi
++
++ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
++ if test "X$xdir" = "X$obj"; then
++ xdir="."
++ else
++ xdir="$xdir"
++ fi
++ baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"`
++ libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
++ # Now arrange that obj and lo_libobj become the same file
++ $show "(cd $xdir && $LN_S $baseobj $libobj)"
++ if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then
++ exit 0
++ else
++ error=$?
++ $run $rm $removelist
++ exit $error
++ fi
++ fi
++
++ # Allow error messages only from the first compilation.
++ suppress_output=' >/dev/null 2>&1'
++ fi
++
++ # Only build a position-dependent object if we build old libraries.
++ if test "$build_old_libs" = yes; then
++ if test "$pic_mode" != yes; then
++ # Don't build PIC code
++ command="$base_compile $srcfile"
++ else
++ # All platforms use -DPIC, to notify preprocessed assembler code.
++ command="$base_compile $srcfile $pic_flag -DPIC"
++ fi
++ if test "$compiler_c_o" = yes; then
++ command="$command -o $obj"
++ output_obj="$obj"
++ fi
++
++ # Suppress compiler output if we already did a PIC compilation.
++ command="$command$suppress_output"
++ $run $rm "$output_obj"
++ $show "$command"
++ if $run eval "$command"; then :
++ else
++ $run $rm $removelist
++ exit 1
++ fi
++
++ if test "$need_locks" = warn &&
++ test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then
++ echo "\
++*** ERROR, $lockfile contains:
++`cat $lockfile 2>/dev/null`
++
++but it should contain:
++$srcfile
++
++This indicates that another process is trying to use the same
++temporary object file, and libtool could not work around it because
++your compiler does not support \`-c' and \`-o' together. If you
++repeat this compilation, it may succeed, by chance, but you had better
++avoid parallel builds (make -j) in this platform, or get a better
++compiler."
++
++ $run $rm $removelist
++ exit 1
++ fi
++
++ # Just move the object if needed
++ if test x"$output_obj" != x"$obj"; then
++ $show "$mv $output_obj $obj"
++ if $run $mv $output_obj $obj; then :
++ else
++ error=$?
++ $run $rm $removelist
++ exit $error
++ fi
++ fi
++
++ # Create an invalid libtool object if no PIC, so that we do not
++ # accidentally link it into a program.
++ if test "$build_libtool_libs" != yes; then
++ $show "echo timestamp > $libobj"
++ $run eval "echo timestamp > \$libobj" || exit $?
++ else
++ # Move the .lo from within objdir
++ $show "$mv $libobj $lo_libobj"
++ if $run $mv $libobj $lo_libobj; then :
++ else
++ error=$?
++ $run $rm $removelist
++ exit $error
++ fi
++ fi
++ fi
++
++ # Unlock the critical section if it was locked
++ if test "$need_locks" != no; then
++ $run $rm "$lockfile"
++ fi
++
++ exit 0
++ ;;
++
++ # libtool link mode
++ link | relink)
++ modename="$modename: link"
++ case $host in
++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++ # It is impossible to link a dll without this setting, and
++ # we shouldn't force the makefile maintainer to figure out
++ # which system we are compiling for in order to pass an extra
++ # flag for every libtool invokation.
++ # allow_undefined=no
++
++ # FIXME: Unfortunately, there are problems with the above when trying
++ # to make a dll which has undefined symbols, in which case not
++ # even a static library is built. For now, we need to specify
++ # -no-undefined on the libtool link line when we can be certain
++ # that all symbols are satisfied, otherwise we get a static library.
++ allow_undefined=yes
++ ;;
++ *)
++ allow_undefined=yes
++ ;;
++ esac
++ libtool_args="$nonopt"
++ compile_command="$nonopt"
++ finalize_command="$nonopt"
++
++ compile_rpath=
++ finalize_rpath=
++ compile_shlibpath=
++ finalize_shlibpath=
++ convenience=
++ old_convenience=
++ deplibs=
++ old_deplibs=
++ compiler_flags=
++ linker_flags=
++ dllsearchpath=
++ lib_search_path=`pwd`
++
++ avoid_version=no
++ dlfiles=
++ dlprefiles=
++ dlself=no
++ export_dynamic=no
++ export_symbols=
++ export_symbols_regex=
++ generated=
++ libobjs=
++ ltlibs=
++ module=no
++ no_install=no
++ objs=
++ prefer_static_libs=no
++ preload=no
++ prev=
++ prevarg=
++ release=
++ rpath=
++ xrpath=
++ perm_rpath=
++ temp_rpath=
++ thread_safe=no
++ vinfo=
++
++ # We need to know -static, to get the right output filenames.
++ for arg
++ do
++ case $arg in
++ -all-static | -static)
++ if test "X$arg" = "X-all-static"; then
++ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
++ $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
++ fi
++ if test -n "$link_static_flag"; then
++ dlopen_self=$dlopen_self_static
++ fi
++ else
++ if test -z "$pic_flag" && test -n "$link_static_flag"; then
++ dlopen_self=$dlopen_self_static
++ fi
++ fi
++ build_libtool_libs=no
++ build_old_libs=yes
++ prefer_static_libs=yes
++ break
++ ;;
++ esac
++ done
++
++ # See if our shared archives depend on static archives.
++ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
++
++ # Go through the arguments, transforming them on the way.
++ while test $# -gt 0; do
++ arg="$1"
++ shift
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
++ ;;
++ *) qarg=$arg ;;
++ esac
++ libtool_args="$libtool_args $qarg"
++
++ # If the previous option needs an argument, assign it.
++ if test -n "$prev"; then
++ case $prev in
++ output)
++ compile_command="$compile_command @OUTPUT@"
++ finalize_command="$finalize_command @OUTPUT@"
++ ;;
++ esac
++
++ case $prev in
++ dlfiles|dlprefiles)
++ if test "$preload" = no; then
++ # Add the symbol object into the linking commands.
++ compile_command="$compile_command @SYMFILE@"
++ finalize_command="$finalize_command @SYMFILE@"
++ preload=yes
++ fi
++ case $arg in
++ *.la | *.lo) ;; # We handle these cases below.
++ force)
++ if test "$dlself" = no; then
++ dlself=needless
++ export_dynamic=yes
++ fi
++ prev=
++ continue
++ ;;
++ self)
++ if test "$prev" = dlprefiles; then
++ dlself=yes
++ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
++ dlself=yes
++ else
++ dlself=needless
++ export_dynamic=yes
++ fi
++ prev=
++ continue
++ ;;
++ *)
++ if test "$prev" = dlfiles; then
++ dlfiles="$dlfiles $arg"
++ else
++ dlprefiles="$dlprefiles $arg"
++ fi
++ prev=
++ continue
++ ;;
++ esac
++ ;;
++ expsyms)
++ export_symbols="$arg"
++ if test ! -f "$arg"; then
++ $echo "$modename: symbol file \`$arg' does not exist"
++ exit 1
++ fi
++ prev=
++ continue
++ ;;
++ expsyms_regex)
++ export_symbols_regex="$arg"
++ prev=
++ continue
++ ;;
++ release)
++ release="-$arg"
++ prev=
++ continue
++ ;;
++ rpath | xrpath)
++ # We need an absolute path.
++ case $arg in
++ [\\/]* | [A-Za-z]:[\\/]*) ;;
++ *)
++ $echo "$modename: only absolute run-paths are allowed" 1>&2
++ exit 1
++ ;;
++ esac
++ if test "$prev" = rpath; then
++ case "$rpath " in
++ *" $arg "*) ;;
++ *) rpath="$rpath $arg" ;;
++ esac
++ else
++ case "$xrpath " in
++ *" $arg "*) ;;
++ *) xrpath="$xrpath $arg" ;;
++ esac
++ fi
++ prev=
++ continue
++ ;;
++ xcompiler)
++ compiler_flags="$compiler_flags $qarg"
++ prev=
++ compile_command="$compile_command $qarg"
++ finalize_command="$finalize_command $qarg"
++ continue
++ ;;
++ xlinker)
++ linker_flags="$linker_flags $qarg"
++ compiler_flags="$compiler_flags $wl$qarg"
++ prev=
++ compile_command="$compile_command $wl$qarg"
++ finalize_command="$finalize_command $wl$qarg"
++ continue
++ ;;
++ *)
++ eval "$prev=\"\$arg\""
++ prev=
++ continue
++ ;;
++ esac
++ fi # test -n $prev
++
++ prevarg="$arg"
++
++ case $arg in
++ -all-static)
++ if test -n "$link_static_flag"; then
++ compile_command="$compile_command $link_static_flag"
++ finalize_command="$finalize_command $link_static_flag"
++ fi
++ continue
++ ;;
++
++ -allow-undefined)
++ # FIXME: remove this flag sometime in the future.
++ $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
++ continue
++ ;;
++
++ -avoid-version)
++ avoid_version=yes
++ continue
++ ;;
++
++ -dlopen)
++ prev=dlfiles
++ continue
++ ;;
++
++ -dlpreopen)
++ prev=dlprefiles
++ continue
++ ;;
++
++ -export-dynamic)
++ export_dynamic=yes
++ continue
++ ;;
++
++ -export-symbols | -export-symbols-regex)
++ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
++ $echo "$modename: more than one -exported-symbols argument is not allowed"
++ exit 1
++ fi
++ if test "X$arg" = "X-export-symbols"; then
++ prev=expsyms
++ else
++ prev=expsyms_regex
++ fi
++ continue
++ ;;
++
++ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
++ # so, if we see these flags be careful not to treat them like -L
++ -L[A-Z][A-Z]*:*)
++ case $with_gcc/$host in
++ no/*-*-irix*)
++ compile_command="$compile_command $arg"
++ finalize_command="$finalize_command $arg"
++ ;;
++ esac
++ continue
++ ;;
++
++ -L*)
++ dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
++ # We need an absolute path.
++ case $dir in
++ [\\/]* | [A-Za-z]:[\\/]*) ;;
++ *)
++ absdir=`cd "$dir" && pwd`
++ if test -z "$absdir"; then
++ $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
++ exit 1
++ fi
++ dir="$absdir"
++ ;;
++ esac
++ case "$deplibs " in
++ *" -L$dir "*) ;;
++ *)
++ deplibs="$deplibs -L$dir"
++ lib_search_path="$lib_search_path $dir"
++ ;;
++ esac
++ case $host in
++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++ case :$dllsearchpath: in
++ *":$dir:"*) ;;
++ *) dllsearchpath="$dllsearchpath:$dir";;
++ esac
++ ;;
++ esac
++ continue
++ ;;
++
++ -l*)
++ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
++ case $host in
++ *-*-cygwin* | *-*-pw32* | *-*-beos*)
++ # These systems don't actually have a C or math library (as such)
++ continue
++ ;;
++ *-*-mingw* | *-*-os2*)
++ # These systems don't actually have a C library (as such)
++ test "X$arg" = "X-lc" && continue
++ ;;
++ esac
++ fi
++ deplibs="$deplibs $arg"
++ continue
++ ;;
++
++ -module)
++ module=yes
++ continue
++ ;;
++
++ -no-fast-install)
++ fast_install=no
++ continue
++ ;;
++
++ -no-install)
++ case $host in
++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++ # The PATH hackery in wrapper scripts is required on Windows
++ # in order for the loader to find any dlls it needs.
++ $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
++ $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
++ fast_install=no
++ ;;
++ *) no_install=yes ;;
++ esac
++ continue
++ ;;
++
++ -no-undefined)
++ allow_undefined=no
++ continue
++ ;;
++
++ -o) prev=output ;;
++
++ -release)
++ prev=release
++ continue
++ ;;
++
++ -rpath)
++ prev=rpath
++ continue
++ ;;
++
++ -R)
++ prev=xrpath
++ continue
++ ;;
++
++ -R*)
++ dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
++ # We need an absolute path.
++ case $dir in
++ [\\/]* | [A-Za-z]:[\\/]*) ;;
++ *)
++ $echo "$modename: only absolute run-paths are allowed" 1>&2
++ exit 1
++ ;;
++ esac
++ case "$xrpath " in
++ *" $dir "*) ;;
++ *) xrpath="$xrpath $dir" ;;
++ esac
++ continue
++ ;;
++
++ -static)
++ # The effects of -static are defined in a previous loop.
++ # We used to do the same as -all-static on platforms that
++ # didn't have a PIC flag, but the assumption that the effects
++ # would be equivalent was wrong. It would break on at least
++ # Digital Unix and AIX.
++ continue
++ ;;
++
++ -thread-safe)
++ thread_safe=yes
++ continue
++ ;;
++
++ -version-info)
++ prev=vinfo
++ continue
++ ;;
++
++ -Wc,*)
++ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
++ arg=
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
++ for flag in $args; do
++ IFS="$save_ifs"
++ case $flag in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ flag="\"$flag\""
++ ;;
++ esac
++ arg="$arg $wl$flag"
++ compiler_flags="$compiler_flags $flag"
++ done
++ IFS="$save_ifs"
++ arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
++ ;;
++
++ -Wl,*)
++ args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
++ arg=
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS=','
++ for flag in $args; do
++ IFS="$save_ifs"
++ case $flag in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ flag="\"$flag\""
++ ;;
++ esac
++ arg="$arg $wl$flag"
++ compiler_flags="$compiler_flags $wl$flag"
++ linker_flags="$linker_flags $flag"
++ done
++ IFS="$save_ifs"
++ arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
++ ;;
++
++ -Xcompiler)
++ prev=xcompiler
++ continue
++ ;;
++
++ -Xlinker)
++ prev=xlinker
++ continue
++ ;;
++
++ # Some other compiler flag.
++ -* | +*)
++ # Unknown arguments in both finalize_command and compile_command need
++ # to be aesthetically quoted because they are evaled later.
++ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ arg="\"$arg\""
++ ;;
++ esac
++ ;;
++
++ *.lo | *.$objext)
++ # A library or standard object.
++ if test "$prev" = dlfiles; then
++ # This file was specified with -dlopen.
++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
++ dlfiles="$dlfiles $arg"
++ prev=
++ continue
++ else
++ # If libtool objects are unsupported, then we need to preload.
++ prev=dlprefiles
++ fi
++ fi
++
++ if test "$prev" = dlprefiles; then
++ # Preload the old-style object.
++ dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"`
++ prev=
++ else
++ case $arg in
++ *.lo) libobjs="$libobjs $arg" ;;
++ *) objs="$objs $arg" ;;
++ esac
++ fi
++ ;;
++
++ *.$libext)
++ # An archive.
++ deplibs="$deplibs $arg"
++ old_deplibs="$old_deplibs $arg"
++ continue
++ ;;
++
++ *.la)
++ # A libtool-controlled library.
++
++ if test "$prev" = dlfiles; then
++ # This library was specified with -dlopen.
++ dlfiles="$dlfiles $arg"
++ prev=
++ elif test "$prev" = dlprefiles; then
++ # The library was specified with -dlpreopen.
++ dlprefiles="$dlprefiles $arg"
++ prev=
++ else
++ deplibs="$deplibs $arg"
++ fi
++ continue
++ ;;
++
++ # Some other compiler argument.
++ *)
++ # Unknown arguments in both finalize_command and compile_command need
++ # to be aesthetically quoted because they are evaled later.
++ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
++ arg="\"$arg\""
++ ;;
++ esac
++ ;;
++ esac # arg
++
++ # Now actually substitute the argument into the commands.
++ if test -n "$arg"; then
++ compile_command="$compile_command $arg"
++ finalize_command="$finalize_command $arg"
++ fi
++ done # argument parsing loop
++
++ if test -n "$prev"; then
++ $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
++ eval arg=\"$export_dynamic_flag_spec\"
++ compile_command="$compile_command $arg"
++ finalize_command="$finalize_command $arg"
++ fi
++
++ # calculate the name of the file, without its directory
++ outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
++ libobjs_save="$libobjs"
++
++ if test -n "$shlibpath_var"; then
++ # get the directories listed in $shlibpath_var
++ eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
++ else
++ shlib_search_path=
++ fi
++ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
++ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
++
++ output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
++ if test "X$output_objdir" = "X$output"; then
++ output_objdir="$objdir"
++ else
++ output_objdir="$output_objdir/$objdir"
++ fi
++ # Create the object directory.
++ if test ! -d $output_objdir; then
++ $show "$mkdir $output_objdir"
++ $run $mkdir $output_objdir
++ status=$?
++ if test $status -ne 0 && test ! -d $output_objdir; then
++ exit $status
++ fi
++ fi
++
++ # Determine the type of output
++ case $output in
++ "")
++ $echo "$modename: you must specify an output file" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ ;;
++ *.$libext) linkmode=oldlib ;;
++ *.lo | *.$objext) linkmode=obj ;;
++ *.la) linkmode=lib ;;
++ *) linkmode=prog ;; # Anything else should be a program.
++ esac
++
++ specialdeplibs=
++ libs=
++ # Find all interdependent deplibs by searching for libraries
++ # that are linked more than once (e.g. -la -lb -la)
++ for deplib in $deplibs; do
++ case "$libs " in
++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ esac
++ libs="$libs $deplib"
++ done
++ deplibs=
++ newdependency_libs=
++ newlib_search_path=
++ need_relink=no # whether we're linking any uninstalled libtool libraries
++ notinst_deplibs= # not-installed libtool libraries
++ notinst_path= # paths that contain not-installed libtool libraries
++ case $linkmode in
++ lib)
++ passes="conv link"
++ for file in $dlfiles $dlprefiles; do
++ case $file in
++ *.la) ;;
++ *)
++ $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
++ exit 1
++ ;;
++ esac
++ done
++ ;;
++ prog)
++ compile_deplibs=
++ finalize_deplibs=
++ alldeplibs=no
++ newdlfiles=
++ newdlprefiles=
++ passes="conv scan dlopen dlpreopen link"
++ ;;
++ *) passes="conv"
++ ;;
++ esac
++ for pass in $passes; do
++ if test "$linkmode" = prog; then
++ # Determine which files to process
++ case $pass in
++ dlopen)
++ libs="$dlfiles"
++ save_deplibs="$deplibs" # Collect dlpreopened libraries
++ deplibs=
++ ;;
++ dlpreopen) libs="$dlprefiles" ;;
++ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
++ esac
++ fi
++ for deplib in $libs; do
++ lib=
++ found=no
++ case $deplib in
++ -l*)
++ if test "$linkmode" = oldlib && test "$linkmode" = obj; then
++ $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2
++ continue
++ fi
++ if test "$pass" = conv; then
++ deplibs="$deplib $deplibs"
++ continue
++ fi
++ name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
++ for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
++ # Search the libtool library
++ lib="$searchdir/lib${name}.la"
++ if test -f "$lib"; then
++ found=yes
++ break
++ fi
++ done
++ if test "$found" != yes; then
++ # deplib doesn't seem to be a libtool library
++ if test "$linkmode,$pass" = "prog,link"; then
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ else
++ deplibs="$deplib $deplibs"
++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
++ fi
++ continue
++ fi
++ ;; # -l
++ -L*)
++ case $linkmode in
++ lib)
++ deplibs="$deplib $deplibs"
++ test "$pass" = conv && continue
++ newdependency_libs="$deplib $newdependency_libs"
++ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
++ ;;
++ prog)
++ if test "$pass" = conv; then
++ deplibs="$deplib $deplibs"
++ continue
++ fi
++ if test "$pass" = scan; then
++ deplibs="$deplib $deplibs"
++ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
++ else
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ fi
++ ;;
++ *)
++ $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2
++ ;;
++ esac # linkmode
++ continue
++ ;; # -L
++ -R*)
++ if test "$pass" = link; then
++ dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
++ # Make sure the xrpath contains only unique directories.
++ case "$xrpath " in
++ *" $dir "*) ;;
++ *) xrpath="$xrpath $dir" ;;
++ esac
++ fi
++ deplibs="$deplib $deplibs"
++ continue
++ ;;
++ *.la) lib="$deplib" ;;
++ *.$libext)
++ if test "$pass" = conv; then
++ deplibs="$deplib $deplibs"
++ continue
++ fi
++ case $linkmode in
++ lib)
++ if test "$deplibs_check_method" != pass_all; then
++ echo
++ echo "*** Warning: This library needs some functionality provided by $deplib."
++ echo "*** I have the capability to make that library automatically link in when"
++ echo "*** you link to this library. But I can only do this if you have a"
++ echo "*** shared version of the library, which you do not appear to have."
++ else
++ echo
++ echo "*** Warning: Linking the shared library $output against the"
++ echo "*** static library $deplib is not portable!"
++ deplibs="$deplib $deplibs"
++ fi
++ continue
++ ;;
++ prog)
++ if test "$pass" != link; then
++ deplibs="$deplib $deplibs"
++ else
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ fi
++ continue
++ ;;
++ esac # linkmode
++ ;; # *.$libext
++ *.lo | *.$objext)
++ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
++ # If there is no dlopen support or we're linking statically,
++ # we need to preload.
++ newdlprefiles="$newdlprefiles $deplib"
++ compile_deplibs="$deplib $compile_deplibs"
++ finalize_deplibs="$deplib $finalize_deplibs"
++ else
++ newdlfiles="$newdlfiles $deplib"
++ fi
++ continue
++ ;;
++ %DEPLIBS%)
++ alldeplibs=yes
++ continue
++ ;;
++ esac # case $deplib
++ if test $found = yes || test -f "$lib"; then :
++ else
++ $echo "$modename: cannot find the library \`$lib'" 1>&2
++ exit 1
++ fi
++
++ # Check to see that this really is a libtool archive.
++ if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
++ else
++ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
++ exit 1
++ fi
++
++ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
++ test "X$ladir" = "X$lib" && ladir="."
++
++ dlname=
++ dlopen=
++ dlpreopen=
++ libdir=
++ library_names=
++ old_library=
++ # If the library was installed with an old release of libtool,
++ # it will not redefine variable installed.
++ installed=yes
++
++ # Read the .la file
++ case $lib in
++ */* | *\\*) . $lib ;;
++ *) . ./$lib ;;
++ esac
++
++ if test "$linkmode,$pass" = "lib,link" ||
++ test "$linkmode,$pass" = "prog,scan" ||
++ { test "$linkmode" = oldlib && test "$linkmode" = obj; }; then
++ # Add dl[pre]opened files of deplib
++ test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
++ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
++ fi
++
++ if test "$pass" = conv; then
++ # Only check for convenience libraries
++ deplibs="$lib $deplibs"
++ if test -z "$libdir"; then
++ if test -z "$old_library"; then
++ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
++ exit 1
++ fi
++ # It is a libtool convenience library, so add in its objects.
++ convenience="$convenience $ladir/$objdir/$old_library"
++ old_convenience="$old_convenience $ladir/$objdir/$old_library"
++ tmp_libs=
++ for deplib in $dependency_libs; do
++ deplibs="$deplib $deplibs"
++ case "$tmp_libs " in
++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ esac
++ tmp_libs="$tmp_libs $deplib"
++ done
++ elif test "$linkmode" != prog && test "$linkmode" != lib; then
++ $echo "$modename: \`$lib' is not a convenience library" 1>&2
++ exit 1
++ fi
++ continue
++ fi # $pass = conv
++
++ # Get the name of the library we link against.
++ linklib=
++ for l in $old_library $library_names; do
++ linklib="$l"
++ done
++ if test -z "$linklib"; then
++ $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
++ exit 1
++ fi
++
++ # This library was specified with -dlopen.
++ if test "$pass" = dlopen; then
++ if test -z "$libdir"; then
++ $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
++ exit 1
++ fi
++ if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
++ # If there is no dlname, no dlopen support or we're linking
++ # statically, we need to preload.
++ dlprefiles="$dlprefiles $lib"
++ else
++ newdlfiles="$newdlfiles $lib"
++ fi
++ continue
++ fi # $pass = dlopen
++
++ # We need an absolute path.
++ case $ladir in
++ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
++ *)
++ abs_ladir=`cd "$ladir" && pwd`
++ if test -z "$abs_ladir"; then
++ $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
++ $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
++ abs_ladir="$ladir"
++ fi
++ ;;
++ esac
++ laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
++
++ # Find the relevant object directory and library name.
++ if test "X$installed" = Xyes; then
++ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
++ $echo "$modename: warning: library \`$lib' was moved." 1>&2
++ dir="$ladir"
++ absdir="$abs_ladir"
++ libdir="$abs_ladir"
++ else
++ dir="$libdir"
++ absdir="$libdir"
++ fi
++ else
++ dir="$ladir/$objdir"
++ absdir="$abs_ladir/$objdir"
++ # Remove this search path later
++ notinst_path="$notinst_path $abs_ladir"
++ fi # $installed = yes
++ name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
++
++ # This library was specified with -dlpreopen.
++ if test "$pass" = dlpreopen; then
++ if test -z "$libdir"; then
++ $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
++ exit 1
++ fi
++ # Prefer using a static library (so that no silly _DYNAMIC symbols
++ # are required to link).
++ if test -n "$old_library"; then
++ newdlprefiles="$newdlprefiles $dir/$old_library"
++ # Otherwise, use the dlname, so that lt_dlopen finds it.
++ elif test -n "$dlname"; then
++ newdlprefiles="$newdlprefiles $dir/$dlname"
++ else
++ newdlprefiles="$newdlprefiles $dir/$linklib"
++ fi
++ fi # $pass = dlpreopen
++
++ if test -z "$libdir"; then
++ # Link the convenience library
++ if test "$linkmode" = lib; then
++ deplibs="$dir/$old_library $deplibs"
++ elif test "$linkmode,$pass" = "prog,link"; then
++ compile_deplibs="$dir/$old_library $compile_deplibs"
++ finalize_deplibs="$dir/$old_library $finalize_deplibs"
++ else
++ deplibs="$lib $deplibs"
++ fi
++ continue
++ fi
++
++ if test "$linkmode" = prog && test "$pass" != link; then
++ newlib_search_path="$newlib_search_path $ladir"
++ deplibs="$lib $deplibs"
++
++ linkalldeplibs=no
++ if test "$link_all_deplibs" != no || test -z "$library_names" ||
++ test "$build_libtool_libs" = no; then
++ linkalldeplibs=yes
++ fi
++
++ tmp_libs=
++ for deplib in $dependency_libs; do
++ case $deplib in
++ -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
++ esac
++ # Need to link against all dependency_libs?
++ if test $linkalldeplibs = yes; then
++ deplibs="$deplib $deplibs"
++ else
++ # Need to hardcode shared library paths
++ # or/and link against static libraries
++ newdependency_libs="$deplib $newdependency_libs"
++ fi
++ case "$tmp_libs " in
++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ esac
++ tmp_libs="$tmp_libs $deplib"
++ done # for deplib
++ continue
++ fi # $linkmode = prog...
++
++ link_static=no # Whether the deplib will be linked statically
++ if test -n "$library_names" &&
++ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
++ # Link against this shared library
++
++ if test "$linkmode,$pass" = "prog,link" ||
++ { test "$linkmode" = lib && test "$hardcode_into_libs" = yes; }; then
++ # Hardcode the library path.
++ # Skip directories that are in the system default run-time
++ # search path.
++ case " $sys_lib_dlsearch_path " in
++ *" $absdir "*) ;;
++ *)
++ case "$compile_rpath " in
++ *" $absdir "*) ;;
++ *) compile_rpath="$compile_rpath $absdir"
++ esac
++ ;;
++ esac
++ case " $sys_lib_dlsearch_path " in
++ *" $libdir "*) ;;
++ *)
++ case "$finalize_rpath " in
++ *" $libdir "*) ;;
++ *) finalize_rpath="$finalize_rpath $libdir"
++ esac
++ ;;
++ esac
++ if test "$linkmode" = prog; then
++ # We need to hardcode the library path
++ if test -n "$shlibpath_var"; then
++ # Make sure the rpath contains only unique directories.
++ case "$temp_rpath " in
++ *" $dir "*) ;;
++ *" $absdir "*) ;;
++ *) temp_rpath="$temp_rpath $dir" ;;
++ esac
++ fi
++ fi
++ fi # $linkmode,$pass = prog,link...
++
++ if test "$alldeplibs" = yes &&
++ { test "$deplibs_check_method" = pass_all ||
++ { test "$build_libtool_libs" = yes &&
++ test -n "$library_names"; }; }; then
++ # We only need to search for static libraries
++ continue
++ fi
++
++ if test "$installed" = no; then
++ notinst_deplibs="$notinst_deplibs $lib"
++ need_relink=yes
++ fi
++
++ if test -n "$old_archive_from_expsyms_cmds"; then
++ # figure out the soname
++ set dummy $library_names
++ realname="$2"
++ shift; shift
++ libname=`eval \\$echo \"$libname_spec\"`
++ # use dlname if we got it. it's perfectly good, no?
++ if test -n "$dlname"; then
++ soname="$dlname"
++ elif test -n "$soname_spec"; then
++ # bleh windows
++ case $host in
++ *cygwin*)
++ major=`expr $current - $age`
++ versuffix="-$major"
++ ;;
++ esac
++ eval soname=\"$soname_spec\"
++ else
++ soname="$realname"
++ fi
++
++ # Make a new name for the extract_expsyms_cmds to use
++ soroot="$soname"
++ soname=`echo $soroot | sed -e 's/^.*\///'`
++ newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a"
++
++ # If the library has no export list, then create one now
++ if test -f "$output_objdir/$soname-def"; then :
++ else
++ $show "extracting exported symbol list from \`$soname'"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ eval cmds=\"$extract_expsyms_cmds\"
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
++ done
++ IFS="$save_ifs"
++ fi
++
++ # Create $newlib
++ if test -f "$output_objdir/$newlib"; then :; else
++ $show "generating import library for \`$soname'"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ eval cmds=\"$old_archive_from_expsyms_cmds\"
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
++ done
++ IFS="$save_ifs"
++ fi
++ # make sure the library variables are pointing to the new library
++ dir=$output_objdir
++ linklib=$newlib
++ fi # test -n $old_archive_from_expsyms_cmds
++
++ if test "$linkmode" = prog || test "$mode" != relink; then
++ add_shlibpath=
++ add_dir=
++ add=
++ lib_linked=yes
++ case $hardcode_action in
++ immediate | unsupported)
++ if test "$hardcode_direct" = no; then
++ add="$dir/$linklib"
++ elif test "$hardcode_minus_L" = no; then
++ case $host in
++ *-*-sunos*) add_shlibpath="$dir" ;;
++ esac
++ add_dir="-L$dir"
++ add="-l$name"
++ elif test "$hardcode_shlibpath_var" = no; then
++ add_shlibpath="$dir"
++ add="-l$name"
++ else
++ lib_linked=no
++ fi
++ ;;
++ relink)
++ if test "$hardcode_direct" = yes; then
++ add="$dir/$linklib"
++ elif test "$hardcode_minus_L" = yes; then
++ add_dir="-L$dir"
++ add="-l$name"
++ elif test "$hardcode_shlibpath_var" = yes; then
++ add_shlibpath="$dir"
++ add="-l$name"
++ else
++ lib_linked=no
++ fi
++ ;;
++ *) lib_linked=no ;;
++ esac
++
++ if test "$lib_linked" != yes; then
++ $echo "$modename: configuration error: unsupported hardcode properties"
++ exit 1
++ fi
++
++ if test -n "$add_shlibpath"; then
++ case :$compile_shlibpath: in
++ *":$add_shlibpath:"*) ;;
++ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
++ esac
++ fi
++ if test "$linkmode" = prog; then
++ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
++ test -n "$add" && compile_deplibs="$add $compile_deplibs"
++ else
++ test -n "$add_dir" && deplibs="$add_dir $deplibs"
++ test -n "$add" && deplibs="$add $deplibs"
++ if test "$hardcode_direct" != yes && \
++ test "$hardcode_minus_L" != yes && \
++ test "$hardcode_shlibpath_var" = yes; then
++ case :$finalize_shlibpath: in
++ *":$libdir:"*) ;;
++ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
++ esac
++ fi
++ fi
++ fi
++
++ if test "$linkmode" = prog || test "$mode" = relink; then
++ add_shlibpath=
++ add_dir=
++ add=
++ # Finalize command for both is simple: just hardcode it.
++ if test "$hardcode_direct" = yes; then
++ add="$libdir/$linklib"
++ elif test "$hardcode_minus_L" = yes; then
++ add_dir="-L$libdir"
++ add="-l$name"
++ elif test "$hardcode_shlibpath_var" = yes; then
++ case :$finalize_shlibpath: in
++ *":$libdir:"*) ;;
++ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
++ esac
++ add="-l$name"
++ else
++ # We cannot seem to hardcode it, guess we'll fake it.
++ add_dir="-L$libdir"
++ add="-l$name"
++ fi
++
++ if test "$linkmode" = prog; then
++ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
++ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
++ else
++ test -n "$add_dir" && deplibs="$add_dir $deplibs"
++ test -n "$add" && deplibs="$add $deplibs"
++ fi
++ fi
++ elif test "$linkmode" = prog; then
++ if test "$alldeplibs" = yes &&
++ { test "$deplibs_check_method" = pass_all ||
++ { test "$build_libtool_libs" = yes &&
++ test -n "$library_names"; }; }; then
++ # We only need to search for static libraries
++ continue
++ fi
++
++ # Try to link the static library
++ # Here we assume that one of hardcode_direct or hardcode_minus_L
++ # is not unsupported. This is valid on all known static and
++ # shared platforms.
++ if test "$hardcode_direct" != unsupported; then
++ test -n "$old_library" && linklib="$old_library"
++ compile_deplibs="$dir/$linklib $compile_deplibs"
++ finalize_deplibs="$dir/$linklib $finalize_deplibs"
++ else
++ compile_deplibs="-l$name -L$dir $compile_deplibs"
++ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
++ fi
++ elif test "$build_libtool_libs" = yes; then
++ # Not a shared library
++ if test "$deplibs_check_method" != pass_all; then
++ # We're trying link a shared library against a static one
++ # but the system doesn't support it.
++
++ # Just print a warning and add the library to dependency_libs so
++ # that the program can be linked against the static library.
++ echo
++ echo "*** Warning: This library needs some functionality provided by $lib."
++ echo "*** I have the capability to make that library automatically link in when"
++ echo "*** you link to this library. But I can only do this if you have a"
++ echo "*** shared version of the library, which you do not appear to have."
++ if test "$module" = yes; then
++ echo "*** Therefore, libtool will create a static module, that should work "
++ echo "*** as long as the dlopening application is linked with the -dlopen flag."
++ if test -z "$global_symbol_pipe"; then
++ echo
++ echo "*** However, this would only work if libtool was able to extract symbol"
++ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
++ echo "*** not find such a program. So, this module is probably useless."
++ echo "*** \`nm' from GNU binutils and a full rebuild may help."
++ fi
++ if test "$build_old_libs" = no; then
++ build_libtool_libs=module
++ build_old_libs=yes
++ else
++ build_libtool_libs=no
++ fi
++ fi
++ else
++ convenience="$convenience $dir/$old_library"
++ old_convenience="$old_convenience $dir/$old_library"
++ deplibs="$dir/$old_library $deplibs"
++ link_static=yes
++ fi
++ fi # link shared/static library?
++
++ if test "$linkmode" = lib; then
++ if test -n "$dependency_libs" &&
++ { test "$hardcode_into_libs" != yes || test $build_old_libs = yes ||
++ test $link_static = yes; }; then
++ # Extract -R from dependency_libs
++ temp_deplibs=
++ for libdir in $dependency_libs; do
++ case $libdir in
++ -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
++ case " $xrpath " in
++ *" $temp_xrpath "*) ;;
++ *) xrpath="$xrpath $temp_xrpath";;
++ esac;;
++ *) temp_deplibs="$temp_deplibs $libdir";;
++ esac
++ done
++ dependency_libs="$temp_deplibs"
++ fi
++
++ newlib_search_path="$newlib_search_path $absdir"
++ # Link against this library
++ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
++ # ... and its dependency_libs
++ tmp_libs=
++ for deplib in $dependency_libs; do
++ newdependency_libs="$deplib $newdependency_libs"
++ case "$tmp_libs " in
++ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
++ esac
++ tmp_libs="$tmp_libs $deplib"
++ done
++
++ if test "$link_all_deplibs" != no; then
++ # Add the search paths of all dependency libraries
++ for deplib in $dependency_libs; do
++ case $deplib in
++ -L*) path="$deplib" ;;
++ *.la)
++ dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
++ test "X$dir" = "X$deplib" && dir="."
++ # We need an absolute path.
++ case $dir in
++ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
++ *)
++ absdir=`cd "$dir" && pwd`
++ if test -z "$absdir"; then
++ $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
++ absdir="$dir"
++ fi
++ ;;
++ esac
++ if grep "^installed=no" $deplib > /dev/null; then
++ path="-L$absdir/$objdir"
++ else
++ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
++ if test -z "$libdir"; then
++ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
++ exit 1
++ fi
++ if test "$absdir" != "$libdir"; then
++ $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
++ fi
++ path="-L$absdir"
++ fi
++ ;;
++ *) continue ;;
++ esac
++ case " $deplibs " in
++ *" $path "*) ;;
++ *) deplibs="$deplibs $path" ;;
++ esac
++ done
++ fi # link_all_deplibs != no
++ fi # linkmode = lib
++ done # for deplib in $libs
++ if test "$pass" = dlpreopen; then
++ # Link the dlpreopened libraries before other libraries
++ for deplib in $save_deplibs; do
++ deplibs="$deplib $deplibs"
++ done
++ fi
++ if test "$pass" != dlopen; then
++ test "$pass" != scan && dependency_libs="$newdependency_libs"
++ if test "$pass" != conv; then
++ # Make sure lib_search_path contains only unique directories.
++ lib_search_path=
++ for dir in $newlib_search_path; do
++ case "$lib_search_path " in
++ *" $dir "*) ;;
++ *) lib_search_path="$lib_search_path $dir" ;;
++ esac
++ done
++ newlib_search_path=
++ fi
++
++ if test "$linkmode,$pass" != "prog,link"; then
++ vars="deplibs"
++ else
++ vars="compile_deplibs finalize_deplibs"
++ fi
++ for var in $vars dependency_libs; do
++ # Add libraries to $var in reverse order
++ eval tmp_libs=\"\$$var\"
++ new_libs=
++ for deplib in $tmp_libs; do
++ case $deplib in
++ -L*) new_libs="$deplib $new_libs" ;;
++ *)
++ case " $specialdeplibs " in
++ *" $deplib "*) new_libs="$deplib $new_libs" ;;
++ *)
++ case " $new_libs " in
++ *" $deplib "*) ;;
++ *) new_libs="$deplib $new_libs" ;;
++ esac
++ ;;
++ esac
++ ;;
++ esac
++ done
++ tmp_libs=
++ for deplib in $new_libs; do
++ case $deplib in
++ -L*)
++ case " $tmp_libs " in
++ *" $deplib "*) ;;
++ *) tmp_libs="$tmp_libs $deplib" ;;
++ esac
++ ;;
++ *) tmp_libs="$tmp_libs $deplib" ;;
++ esac
++ done
++ eval $var=\"$tmp_libs\"
++ done # for var
++ fi
++ if test "$pass" = "conv" &&
++ { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then
++ libs="$deplibs" # reset libs
++ deplibs=
++ fi
++ done # for pass
++ if test "$linkmode" = prog; then
++ dlfiles="$newdlfiles"
++ dlprefiles="$newdlprefiles"
++ fi
++
++ case $linkmode in
++ oldlib)
++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
++ $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
++ fi
++
++ if test -n "$rpath"; then
++ $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
++ fi
++
++ if test -n "$xrpath"; then
++ $echo "$modename: warning: \`-R' is ignored for archives" 1>&2
++ fi
++
++ if test -n "$vinfo"; then
++ $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2
++ fi
++
++ if test -n "$release"; then
++ $echo "$modename: warning: \`-release' is ignored for archives" 1>&2
++ fi
++
++ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
++ $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
++ fi
++
++ # Now set the variables for building old libraries.
++ build_libtool_libs=no
++ oldlibs="$output"
++ objs="$objs$old_deplibs"
++ ;;
++
++ lib)
++ # Make sure we only generate libraries of the form `libNAME.la'.
++ case $outputname in
++ lib*)
++ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
++ eval libname=\"$libname_spec\"
++ ;;
++ *)
++ if test "$module" = no; then
++ $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++ if test "$need_lib_prefix" != no; then
++ # Add the "lib" prefix for modules if required
++ name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
++ eval libname=\"$libname_spec\"
++ else
++ libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
++ fi
++ ;;
++ esac
++
++ if test -n "$objs"; then
++ if test "$deplibs_check_method" != pass_all; then
++ $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
++ exit 1
++ else
++ echo
++ echo "*** Warning: Linking the shared library $output against the non-libtool"
++ echo "*** objects $objs is not portable!"
++ libobjs="$libobjs $objs"
++ fi
++ fi
++
++ if test "$dlself" != no; then
++ $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
++ fi
++
++ set dummy $rpath
++ if test $# -gt 2; then
++ $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
++ fi
++ install_libdir="$2"
++
++ oldlibs=
++ if test -z "$rpath"; then
++ if test "$build_libtool_libs" = yes; then
++ # Building a libtool convenience library.
++ libext=al
++ oldlibs="$output_objdir/$libname.$libext $oldlibs"
++ build_libtool_libs=convenience
++ build_old_libs=yes
++ fi
++
++ if test -n "$vinfo"; then
++ $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2
++ fi
++
++ if test -n "$release"; then
++ $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
++ fi
++ else
++
++ # Parse the version information argument.
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS=':'
++ set dummy $vinfo 0 0 0
++ IFS="$save_ifs"
++
++ if test -n "$8"; then
++ $echo "$modename: too many parameters to \`-version-info'" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ current="$2"
++ revision="$3"
++ age="$4"
++
++ # Check that each of the things are valid numbers.
++ case $current in
++ 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
++ *)
++ $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
++ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
++ exit 1
++ ;;
++ esac
++
++ case $revision in
++ 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
++ *)
++ $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
++ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
++ exit 1
++ ;;
++ esac
++
++ case $age in
++ 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
++ *)
++ $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
++ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
++ exit 1
++ ;;
++ esac
++
++ if test $age -gt $current; then
++ $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
++ $echo "$modename: \`$vinfo' is not valid version information" 1>&2
++ exit 1
++ fi
++
++ # Calculate the version variables.
++ major=
++ versuffix=
++ verstring=
++ case $version_type in
++ none) ;;
++
++ darwin)
++ # Like Linux, but with the current version available in
++ # verstring for coding it into the library header
++ major=.`expr $current - $age`
++ versuffix="$major.$age.$revision"
++ # Darwin ld doesn't like 0 for these options...
++ minor_current=`expr $current + 1`
++ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
++ ;;
++
++ freebsd-aout)
++ major=".$current"
++ versuffix=".$current.$revision";
++ ;;
++
++ freebsd-elf)
++ major=".$current"
++ versuffix=".$current";
++ ;;
++
++ irix)
++ major=`expr $current - $age + 1`
++ verstring="sgi$major.$revision"
++
++ # Add in all the interfaces that we are compatible with.
++ loop=$revision
++ while test $loop != 0; do
++ iface=`expr $revision - $loop`
++ loop=`expr $loop - 1`
++ verstring="sgi$major.$iface:$verstring"
++ done
++
++ # Before this point, $major must not contain `.'.
++ major=.$major
++ versuffix="$major.$revision"
++ ;;
++
++ linux)
++ major=.`expr $current - $age`
++ versuffix="$major.$age.$revision"
++ ;;
++
++ osf)
++ major=`expr $current - $age`
++ versuffix=".$current.$age.$revision"
++ verstring="$current.$age.$revision"
++
++ # Add in all the interfaces that we are compatible with.
++ loop=$age
++ while test $loop != 0; do
++ iface=`expr $current - $loop`
++ loop=`expr $loop - 1`
++ verstring="$verstring:${iface}.0"
++ done
++
++ # Make executables depend on our current version.
++ verstring="$verstring:${current}.0"
++ ;;
++
++ sunos)
++ major=".$current"
++ versuffix=".$current.$revision"
++ ;;
++
++ windows)
++ # Use '-' rather than '.', since we only want one
++ # extension on DOS 8.3 filesystems.
++ major=`expr $current - $age`
++ versuffix="-$major"
++ ;;
++
++ *)
++ $echo "$modename: unknown library version type \`$version_type'" 1>&2
++ echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
++ exit 1
++ ;;
++ esac
++
++ # Clear the version info if we defaulted, and they specified a release.
++ if test -z "$vinfo" && test -n "$release"; then
++ major=
++ verstring="0.0"
++ if test "$need_version" = no; then
++ versuffix=
++ else
++ versuffix=".0.0"
++ fi
++ fi
++
++ # Remove version info from name if versioning should be avoided
++ if test "$avoid_version" = yes && test "$need_version" = no; then
++ major=
++ versuffix=
++ verstring=""
++ fi
++
++ # Check to see if the archive will have undefined symbols.
++ if test "$allow_undefined" = yes; then
++ if test "$allow_undefined_flag" = unsupported; then
++ $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
++ build_libtool_libs=no
++ build_old_libs=yes
++ fi
++ else
++ # Don't allow undefined symbols.
++ allow_undefined_flag="$no_undefined_flag"
++ fi
++ fi
++
++ if test "$mode" != relink; then
++ # Remove our outputs.
++ $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*"
++ $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*
++ fi
++
++ # Now set the variables for building old libraries.
++ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
++ oldlibs="$oldlibs $output_objdir/$libname.$libext"
++
++ # Transform .lo files to .o files.
++ oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
++ fi
++
++ # Eliminate all temporary directories.
++ for path in $notinst_path; do
++ lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'`
++ deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'`
++ dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'`
++ done
++
++ if test -n "$xrpath"; then
++ # If the user specified any rpath flags, then add them.
++ temp_xrpath=
++ for libdir in $xrpath; do
++ temp_xrpath="$temp_xrpath -R$libdir"
++ case "$finalize_rpath " in
++ *" $libdir "*) ;;
++ *) finalize_rpath="$finalize_rpath $libdir" ;;
++ esac
++ done
++ if test $hardcode_into_libs != yes || test $build_old_libs = yes; then
++ dependency_libs="$temp_xrpath $dependency_libs"
++ fi
++ fi
++
++ # Make sure dlfiles contains only unique files that won't be dlpreopened
++ old_dlfiles="$dlfiles"
++ dlfiles=
++ for lib in $old_dlfiles; do
++ case " $dlprefiles $dlfiles " in
++ *" $lib "*) ;;
++ *) dlfiles="$dlfiles $lib" ;;
++ esac
++ done
++
++ # Make sure dlprefiles contains only unique files
++ old_dlprefiles="$dlprefiles"
++ dlprefiles=
++ for lib in $old_dlprefiles; do
++ case "$dlprefiles " in
++ *" $lib "*) ;;
++ *) dlprefiles="$dlprefiles $lib" ;;
++ esac
++ done
++
++ if test "$build_libtool_libs" = yes; then
++ if test -n "$rpath"; then
++ case $host in
++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
++ # these systems don't actually have a c library (as such)!
++ ;;
++ *-*-rhapsody* | *-*-darwin1.[012])
++ # Rhapsody C library is in the System framework
++ deplibs="$deplibs -framework System"
++ ;;
++ *-*-netbsd*)
++ # Don't link with libc until the a.out ld.so is fixed.
++ ;;
++ *)
++ # Add libc to deplibs on all other systems if necessary.
++ if test "$build_libtool_need_lc" = "yes"; then
++ deplibs="$deplibs -lc"
++ fi
++ ;;
++ esac
++ fi
++
++ # Transform deplibs into only deplibs that can be linked in shared.
++ name_save=$name
++ libname_save=$libname
++ release_save=$release
++ versuffix_save=$versuffix
++ major_save=$major
++ # I'm not sure if I'm treating the release correctly. I think
++ # release should show up in the -l (ie -lgmp5) so we don't want to
++ # add it in twice. Is that correct?
++ release=""
++ versuffix=""
++ major=""
++ newdeplibs=
++ droppeddeps=no
++ case $deplibs_check_method in
++ pass_all)
++ # Don't check for shared/static. Everything works.
++ # This might be a little naive. We might want to check
++ # whether the library exists or not. But this is on
++ # osf3 & osf4 and I'm not really sure... Just
++ # implementing what was already the behaviour.
++ newdeplibs=$deplibs
++ ;;
++ test_compile)
++ # This code stresses the "libraries are programs" paradigm to its
++ # limits. Maybe even breaks it. We compile a program, linking it
++ # against the deplibs as a proxy for the library. Then we can check
++ # whether they linked in statically or dynamically with ldd.
++ $rm conftest.c
++ cat > conftest.c <<EOF
++ int main() { return 0; }
++EOF
++ $rm conftest
++ $CC -o conftest conftest.c $deplibs
++ if test $? -eq 0 ; then
++ ldd_output=`ldd conftest`
++ for i in $deplibs; do
++ name="`expr $i : '-l\(.*\)'`"
++ # If $name is empty we are operating on a -L argument.
++ if test -n "$name" && test "$name" != "0"; then
++ libname=`eval \\$echo \"$libname_spec\"`
++ deplib_matches=`eval \\$echo \"$library_names_spec\"`
++ set dummy $deplib_matches
++ deplib_match=$2
++ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
++ newdeplibs="$newdeplibs $i"
++ else
++ droppeddeps=yes
++ echo
++ echo "*** Warning: This library needs some functionality provided by $i."
++ echo "*** I have the capability to make that library automatically link in when"
++ echo "*** you link to this library. But I can only do this if you have a"
++ echo "*** shared version of the library, which you do not appear to have."
++ fi
++ else
++ newdeplibs="$newdeplibs $i"
++ fi
++ done
++ else
++ # Error occured in the first compile. Let's try to salvage the situation:
++ # Compile a seperate program for each library.
++ for i in $deplibs; do
++ name="`expr $i : '-l\(.*\)'`"
++ # If $name is empty we are operating on a -L argument.
++ if test -n "$name" && test "$name" != "0"; then
++ $rm conftest
++ $CC -o conftest conftest.c $i
++ # Did it work?
++ if test $? -eq 0 ; then
++ ldd_output=`ldd conftest`
++ libname=`eval \\$echo \"$libname_spec\"`
++ deplib_matches=`eval \\$echo \"$library_names_spec\"`
++ set dummy $deplib_matches
++ deplib_match=$2
++ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
++ newdeplibs="$newdeplibs $i"
++ else
++ droppeddeps=yes
++ echo
++ echo "*** Warning: This library needs some functionality provided by $i."
++ echo "*** I have the capability to make that library automatically link in when"
++ echo "*** you link to this library. But I can only do this if you have a"
++ echo "*** shared version of the library, which you do not appear to have."
++ fi
++ else
++ droppeddeps=yes
++ echo
++ echo "*** Warning! Library $i is needed by this library but I was not able to"
++ echo "*** make it link in! You will probably need to install it or some"
++ echo "*** library that it depends on before this library will be fully"
++ echo "*** functional. Installing it before continuing would be even better."
++ fi
++ else
++ newdeplibs="$newdeplibs $i"
++ fi
++ done
++ fi
++ ;;
++ file_magic*)
++ set dummy $deplibs_check_method
++ file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
++ for a_deplib in $deplibs; do
++ name="`expr $a_deplib : '-l\(.*\)'`"
++ # If $name is empty we are operating on a -L argument.
++ if test -n "$name" && test "$name" != "0"; then
++ libname=`eval \\$echo \"$libname_spec\"`
++ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
++ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
++ for potent_lib in $potential_libs; do
++ # Follow soft links.
++ if ls -lLd "$potent_lib" 2>/dev/null \
++ | grep " -> " >/dev/null; then
++ continue
++ fi
++ # The statement above tries to avoid entering an
++ # endless loop below, in case of cyclic links.
++ # We might still enter an endless loop, since a link
++ # loop can be closed while we follow links,
++ # but so what?
++ potlib="$potent_lib"
++ while test -h "$potlib" 2>/dev/null; do
++ potliblink=`ls -ld $potlib | sed 's/.* -> //'`
++ case $potliblink in
++ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
++ *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
++ esac
++ done
++ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
++ | sed 10q \
++ | egrep "$file_magic_regex" > /dev/null; then
++ newdeplibs="$newdeplibs $a_deplib"
++ a_deplib=""
++ break 2
++ fi
++ done
++ done
++ if test -n "$a_deplib" ; then
++ droppeddeps=yes
++ echo
++ echo "*** Warning: This library needs some functionality provided by $a_deplib."
++ echo "*** I have the capability to make that library automatically link in when"
++ echo "*** you link to this library. But I can only do this if you have a"
++ echo "*** shared version of the library, which you do not appear to have."
++ fi
++ else
++ # Add a -L argument.
++ newdeplibs="$newdeplibs $a_deplib"
++ fi
++ done # Gone through all deplibs.
++ ;;
++ match_pattern*)
++ set dummy $deplibs_check_method
++ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
++ for a_deplib in $deplibs; do
++ name="`expr $a_deplib : '-l\(.*\)'`"
++ # If $name is empty we are operating on a -L argument.
++ if test -n "$name" && test "$name" != "0"; then
++ libname=`eval \\$echo \"$libname_spec\"`
++ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
++ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
++ for potent_lib in $potential_libs; do
++ if eval echo \"$potent_lib\" 2>/dev/null \
++ | sed 10q \
++ | egrep "$match_pattern_regex" > /dev/null; then
++ newdeplibs="$newdeplibs $a_deplib"
++ a_deplib=""
++ break 2
++ fi
++ done
++ done
++ if test -n "$a_deplib" ; then
++ droppeddeps=yes
++ echo
++ echo "*** Warning: This library needs some functionality provided by $a_deplib."
++ echo "*** I have the capability to make that library automatically link in when"
++ echo "*** you link to this library. But I can only do this if you have a"
++ echo "*** shared version of the library, which you do not appear to have."
++ fi
++ else
++ # Add a -L argument.
++ newdeplibs="$newdeplibs $a_deplib"
++ fi
++ done # Gone through all deplibs.
++ ;;
++ none | unknown | *)
++ newdeplibs=""
++ if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
++ -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' |
++ grep . >/dev/null; then
++ echo
++ if test "X$deplibs_check_method" = "Xnone"; then
++ echo "*** Warning: inter-library dependencies are not supported in this platform."
++ else
++ echo "*** Warning: inter-library dependencies are not known to be supported."
++ fi
++ echo "*** All declared inter-library dependencies are being dropped."
++ droppeddeps=yes
++ fi
++ ;;
++ esac
++ versuffix=$versuffix_save
++ major=$major_save
++ release=$release_save
++ libname=$libname_save
++ name=$name_save
++
++ case $host in
++ *-*-rhapsody* | *-*-darwin1.[012])
++ # On Rhapsody replace the C library is the System framework
++ newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
++ ;;
++ esac
++
++ if test "$droppeddeps" = yes; then
++ if test "$module" = yes; then
++ echo
++ echo "*** Warning: libtool could not satisfy all declared inter-library"
++ echo "*** dependencies of module $libname. Therefore, libtool will create"
++ echo "*** a static module, that should work as long as the dlopening"
++ echo "*** application is linked with the -dlopen flag."
++ if test -z "$global_symbol_pipe"; then
++ echo
++ echo "*** However, this would only work if libtool was able to extract symbol"
++ echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
++ echo "*** not find such a program. So, this module is probably useless."
++ echo "*** \`nm' from GNU binutils and a full rebuild may help."
++ fi
++ if test "$build_old_libs" = no; then
++ oldlibs="$output_objdir/$libname.$libext"
++ build_libtool_libs=module
++ build_old_libs=yes
++ else
++ build_libtool_libs=no
++ fi
++ else
++ echo "*** The inter-library dependencies that have been dropped here will be"
++ echo "*** automatically added whenever a program is linked with this library"
++ echo "*** or is declared to -dlopen it."
++
++ if test $allow_undefined = no; then
++ echo
++ echo "*** Since this library must not contain undefined symbols,"
++ echo "*** because either the platform does not support them or"
++ echo "*** it was explicitly requested with -no-undefined,"
++ echo "*** libtool will only create a static version of it."
++ if test "$build_old_libs" = no; then
++ oldlibs="$output_objdir/$libname.$libext"
++ build_libtool_libs=module
++ build_old_libs=yes
++ else
++ build_libtool_libs=no
++ fi
++ fi
++ fi
++ fi
++ # Done checking deplibs!
++ deplibs=$newdeplibs
++ fi
++
++ # All the library-specific variables (install_libdir is set above).
++ library_names=
++ old_library=
++ dlname=
++
++ # Test again, we may have decided not to build it any more
++ if test "$build_libtool_libs" = yes; then
++ if test "$hardcode_into_libs" = yes; then
++ # Hardcode the library paths
++ hardcode_libdirs=
++ dep_rpath=
++ rpath="$finalize_rpath"
++ test "$mode" != relink && rpath="$compile_rpath$rpath"
++ for libdir in $rpath; do
++ if test -n "$hardcode_libdir_flag_spec"; then
++ if test -n "$hardcode_libdir_separator"; then
++ if test -z "$hardcode_libdirs"; then
++ hardcode_libdirs="$libdir"
++ else
++ # Just accumulate the unique libdirs.
++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
++ ;;
++ *)
++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
++ ;;
++ esac
++ fi
++ else
++ eval flag=\"$hardcode_libdir_flag_spec\"
++ dep_rpath="$dep_rpath $flag"
++ fi
++ elif test -n "$runpath_var"; then
++ case "$perm_rpath " in
++ *" $libdir "*) ;;
++ *) perm_rpath="$perm_rpath $libdir" ;;
++ esac
++ fi
++ done
++ # Substitute the hardcoded libdirs into the rpath.
++ if test -n "$hardcode_libdir_separator" &&
++ test -n "$hardcode_libdirs"; then
++ libdir="$hardcode_libdirs"
++ eval dep_rpath=\"$hardcode_libdir_flag_spec\"
++ fi
++ if test -n "$runpath_var" && test -n "$perm_rpath"; then
++ # We should set the runpath_var.
++ rpath=
++ for dir in $perm_rpath; do
++ rpath="$rpath$dir:"
++ done
++ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
++ fi
++ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
++ fi
++
++ shlibpath="$finalize_shlibpath"
++ test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
++ if test -n "$shlibpath"; then
++ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
++ fi
++
++ # Get the real and link names of the library.
++ eval library_names=\"$library_names_spec\"
++ set dummy $library_names
++ realname="$2"
++ shift; shift
++
++ if test -n "$soname_spec"; then
++ eval soname=\"$soname_spec\"
++ else
++ soname="$realname"
++ fi
++ test -z "$dlname" && dlname=$soname
++
++ lib="$output_objdir/$realname"
++ for link
++ do
++ linknames="$linknames $link"
++ done
++
++ # Ensure that we have .o objects for linkers which dislike .lo
++ # (e.g. aix) in case we are running --disable-static
++ for obj in $libobjs; do
++ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
++ if test "X$xdir" = "X$obj"; then
++ xdir="."
++ else
++ xdir="$xdir"
++ fi
++ baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
++ oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
++ if test ! -f $xdir/$oldobj; then
++ $show "(cd $xdir && ${LN_S} $baseobj $oldobj)"
++ $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $?
++ fi
++ done
++
++ # Use standard objects if they are pic
++ test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
++
++ # Prepare the list of exported symbols
++ if test -z "$export_symbols"; then
++ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
++ $show "generating symbol list for \`$libname.la'"
++ export_symbols="$output_objdir/$libname.exp"
++ $run $rm $export_symbols
++ eval cmds=\"$export_symbols_cmds\"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
++ done
++ IFS="$save_ifs"
++ if test -n "$export_symbols_regex"; then
++ $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
++ $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
++ $show "$mv \"${export_symbols}T\" \"$export_symbols\""
++ $run eval '$mv "${export_symbols}T" "$export_symbols"'
++ fi
++ fi
++ fi
++
++ if test -n "$export_symbols" && test -n "$include_expsyms"; then
++ $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
++ fi
++
++ if test -n "$convenience"; then
++ if test -n "$whole_archive_flag_spec"; then
++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
++ else
++ gentop="$output_objdir/${outputname}x"
++ $show "${rm}r $gentop"
++ $run ${rm}r "$gentop"
++ $show "mkdir $gentop"
++ $run mkdir "$gentop"
++ status=$?
++ if test $status -ne 0 && test ! -d "$gentop"; then
++ exit $status
++ fi
++ generated="$generated $gentop"
++
++ for xlib in $convenience; do
++ # Extract the objects.
++ case $xlib in
++ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
++ *) xabs=`pwd`"/$xlib" ;;
++ esac
++ xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
++ xdir="$gentop/$xlib"
++
++ $show "${rm}r $xdir"
++ $run ${rm}r "$xdir"
++ $show "mkdir $xdir"
++ $run mkdir "$xdir"
++ status=$?
++ if test $status -ne 0 && test ! -d "$xdir"; then
++ exit $status
++ fi
++ $show "(cd $xdir && $AR x $xabs)"
++ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
++
++ libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
++ done
++ fi
++ fi
++
++ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
++ eval flag=\"$thread_safe_flag_spec\"
++ linker_flags="$linker_flags $flag"
++ fi
++
++ # Make a backup of the uninstalled library when relinking
++ if test "$mode" = relink; then
++ $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
++ fi
++
++ # Do each of the archive commands.
++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
++ eval cmds=\"$archive_expsym_cmds\"
++ else
++ eval cmds=\"$archive_cmds\"
++ fi
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
++ done
++ IFS="$save_ifs"
++
++ # Restore the uninstalled library and exit
++ if test "$mode" = relink; then
++ $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
++ exit 0
++ fi
++
++ # Create links to the real library.
++ for linkname in $linknames; do
++ if test "$realname" != "$linkname"; then
++ $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
++ $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
++ fi
++ done
++
++ # If -module or -export-dynamic was specified, set the dlname.
++ if test "$module" = yes || test "$export_dynamic" = yes; then
++ # On all known operating systems, these are identical.
++ dlname="$soname"
++ fi
++ fi
++ ;;
++
++ obj)
++ if test -n "$deplibs"; then
++ $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
++ fi
++
++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
++ $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
++ fi
++
++ if test -n "$rpath"; then
++ $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
++ fi
++
++ if test -n "$xrpath"; then
++ $echo "$modename: warning: \`-R' is ignored for objects" 1>&2
++ fi
++
++ if test -n "$vinfo"; then
++ $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
++ fi
++
++ if test -n "$release"; then
++ $echo "$modename: warning: \`-release' is ignored for objects" 1>&2
++ fi
++
++ case $output in
++ *.lo)
++ if test -n "$objs$old_deplibs"; then
++ $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
++ exit 1
++ fi
++ libobj="$output"
++ obj=`$echo "X$output" | $Xsed -e "$lo2o"`
++ ;;
++ *)
++ libobj=
++ obj="$output"
++ ;;
++ esac
++
++ # Delete the old objects.
++ $run $rm $obj $libobj
++
++ # Objects from convenience libraries. This assumes
++ # single-version convenience libraries. Whenever we create
++ # different ones for PIC/non-PIC, this we'll have to duplicate
++ # the extraction.
++ reload_conv_objs=
++ gentop=
++ # reload_cmds runs $LD directly, so let us get rid of
++ # -Wl from whole_archive_flag_spec
++ wl=
++
++ if test -n "$convenience"; then
++ if test -n "$whole_archive_flag_spec"; then
++ eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
++ else
++ gentop="$output_objdir/${obj}x"
++ $show "${rm}r $gentop"
++ $run ${rm}r "$gentop"
++ $show "mkdir $gentop"
++ $run mkdir "$gentop"
++ status=$?
++ if test $status -ne 0 && test ! -d "$gentop"; then
++ exit $status
++ fi
++ generated="$generated $gentop"
++
++ for xlib in $convenience; do
++ # Extract the objects.
++ case $xlib in
++ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
++ *) xabs=`pwd`"/$xlib" ;;
++ esac
++ xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
++ xdir="$gentop/$xlib"
++
++ $show "${rm}r $xdir"
++ $run ${rm}r "$xdir"
++ $show "mkdir $xdir"
++ $run mkdir "$xdir"
++ status=$?
++ if test $status -ne 0 && test ! -d "$xdir"; then
++ exit $status
++ fi
++ $show "(cd $xdir && $AR x $xabs)"
++ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
++
++ reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP`
++ done
++ fi
++ fi
++
++ # Create the old-style object.
++ reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
++
++ output="$obj"
++ eval cmds=\"$reload_cmds\"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
++ done
++ IFS="$save_ifs"
++
++ # Exit if we aren't doing a library object file.
++ if test -z "$libobj"; then
++ if test -n "$gentop"; then
++ $show "${rm}r $gentop"
++ $run ${rm}r $gentop
++ fi
++
++ exit 0
++ fi
++
++ if test "$build_libtool_libs" != yes; then
++ if test -n "$gentop"; then
++ $show "${rm}r $gentop"
++ $run ${rm}r $gentop
++ fi
++
++ # Create an invalid libtool object if no PIC, so that we don't
++ # accidentally link it into a program.
++ $show "echo timestamp > $libobj"
++ $run eval "echo timestamp > $libobj" || exit $?
++ exit 0
++ fi
++
++ if test -n "$pic_flag" || test "$pic_mode" != default; then
++ # Only do commands if we really have different PIC objects.
++ reload_objs="$libobjs $reload_conv_objs"
++ output="$libobj"
++ eval cmds=\"$reload_cmds\"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
++ done
++ IFS="$save_ifs"
++ else
++ # Just create a symlink.
++ $show $rm $libobj
++ $run $rm $libobj
++ xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'`
++ if test "X$xdir" = "X$libobj"; then
++ xdir="."
++ else
++ xdir="$xdir"
++ fi
++ baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'`
++ oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"`
++ $show "(cd $xdir && $LN_S $oldobj $baseobj)"
++ $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $?
++ fi
++
++ if test -n "$gentop"; then
++ $show "${rm}r $gentop"
++ $run ${rm}r $gentop
++ fi
++
++ exit 0
++ ;;
++
++ prog)
++ case $host in
++ *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;;
++ esac
++ if test -n "$vinfo"; then
++ $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
++ fi
++
++ if test -n "$release"; then
++ $echo "$modename: warning: \`-release' is ignored for programs" 1>&2
++ fi
++
++ if test "$preload" = yes; then
++ if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
++ test "$dlopen_self_static" = unknown; then
++ $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
++ fi
++ fi
++
++ case $host in
++ *-*-rhapsody* | *-*-darwin1.[012])
++ # On Rhapsody replace the C library is the System framework
++ compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
++ finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
++ ;;
++ esac
++
++ compile_command="$compile_command $compile_deplibs"
++ finalize_command="$finalize_command $finalize_deplibs"
++
++ if test -n "$rpath$xrpath"; then
++ # If the user specified any rpath flags, then add them.
++ for libdir in $rpath $xrpath; do
++ # This is the magic to use -rpath.
++ case "$finalize_rpath " in
++ *" $libdir "*) ;;
++ *) finalize_rpath="$finalize_rpath $libdir" ;;
++ esac
++ done
++ fi
++
++ # Now hardcode the library paths
++ rpath=
++ hardcode_libdirs=
++ for libdir in $compile_rpath $finalize_rpath; do
++ if test -n "$hardcode_libdir_flag_spec"; then
++ if test -n "$hardcode_libdir_separator"; then
++ if test -z "$hardcode_libdirs"; then
++ hardcode_libdirs="$libdir"
++ else
++ # Just accumulate the unique libdirs.
++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
++ ;;
++ *)
++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
++ ;;
++ esac
++ fi
++ else
++ eval flag=\"$hardcode_libdir_flag_spec\"
++ rpath="$rpath $flag"
++ fi
++ elif test -n "$runpath_var"; then
++ case "$perm_rpath " in
++ *" $libdir "*) ;;
++ *) perm_rpath="$perm_rpath $libdir" ;;
++ esac
++ fi
++ case $host in
++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
++ case :$dllsearchpath: in
++ *":$libdir:"*) ;;
++ *) dllsearchpath="$dllsearchpath:$libdir";;
++ esac
++ ;;
++ esac
++ done
++ # Substitute the hardcoded libdirs into the rpath.
++ if test -n "$hardcode_libdir_separator" &&
++ test -n "$hardcode_libdirs"; then
++ libdir="$hardcode_libdirs"
++ eval rpath=\" $hardcode_libdir_flag_spec\"
++ fi
++ compile_rpath="$rpath"
++
++ rpath=
++ hardcode_libdirs=
++ for libdir in $finalize_rpath; do
++ if test -n "$hardcode_libdir_flag_spec"; then
++ if test -n "$hardcode_libdir_separator"; then
++ if test -z "$hardcode_libdirs"; then
++ hardcode_libdirs="$libdir"
++ else
++ # Just accumulate the unique libdirs.
++ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
++ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
++ ;;
++ *)
++ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
++ ;;
++ esac
++ fi
++ else
++ eval flag=\"$hardcode_libdir_flag_spec\"
++ rpath="$rpath $flag"
++ fi
++ elif test -n "$runpath_var"; then
++ case "$finalize_perm_rpath " in
++ *" $libdir "*) ;;
++ *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
++ esac
++ fi
++ done
++ # Substitute the hardcoded libdirs into the rpath.
++ if test -n "$hardcode_libdir_separator" &&
++ test -n "$hardcode_libdirs"; then
++ libdir="$hardcode_libdirs"
++ eval rpath=\" $hardcode_libdir_flag_spec\"
++ fi
++ finalize_rpath="$rpath"
++
++ if test -n "$libobjs" && test "$build_old_libs" = yes; then
++ # Transform all the library objects into standard objects.
++ compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
++ finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
++ fi
++
++ dlsyms=
++ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
++ if test -n "$NM" && test -n "$global_symbol_pipe"; then
++ dlsyms="${outputname}S.c"
++ else
++ $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
++ fi
++ fi
++
++ if test -n "$dlsyms"; then
++ case $dlsyms in
++ "") ;;
++ *.c)
++ # Discover the nlist of each of the dlfiles.
++ nlist="$output_objdir/${outputname}.nm"
++
++ $show "$rm $nlist ${nlist}S ${nlist}T"
++ $run $rm "$nlist" "${nlist}S" "${nlist}T"
++
++ # Parse the name list into a source file.
++ $show "creating $output_objdir/$dlsyms"
++
++ test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
++/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
++/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
++
++#ifdef __cplusplus
++extern \"C\" {
++#endif
++
++/* Prevent the only kind of declaration conflicts we can make. */
++#define lt_preloaded_symbols some_other_symbol
++
++/* External symbol declarations for the compiler. */\
++"
++
++ if test "$dlself" = yes; then
++ $show "generating symbol list for \`$output'"
++
++ test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
++
++ # Add our own program objects to the symbol list.
++ progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
++ for arg in $progfiles; do
++ $show "extracting global C symbols from \`$arg'"
++ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
++ done
++
++ if test -n "$exclude_expsyms"; then
++ $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
++ $run eval '$mv "$nlist"T "$nlist"'
++ fi
++
++ if test -n "$export_symbols_regex"; then
++ $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T'
++ $run eval '$mv "$nlist"T "$nlist"'
++ fi
++
++ # Prepare the list of exported symbols
++ if test -z "$export_symbols"; then
++ export_symbols="$output_objdir/$output.exp"
++ $run $rm $export_symbols
++ $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
++ else
++ $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
++ $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
++ $run eval 'mv "$nlist"T "$nlist"'
++ fi
++ fi
++
++ for arg in $dlprefiles; do
++ $show "extracting global C symbols from \`$arg'"
++ name=`echo "$arg" | sed -e 's%^.*/%%'`
++ $run eval 'echo ": $name " >> "$nlist"'
++ $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
++ done
++
++ if test -z "$run"; then
++ # Make sure we have at least an empty file.
++ test -f "$nlist" || : > "$nlist"
++
++ if test -n "$exclude_expsyms"; then
++ egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
++ $mv "$nlist"T "$nlist"
++ fi
++
++ # Try sorting and uniquifying the output.
++ if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then
++ :
++ else
++ grep -v "^: " < "$nlist" > "$nlist"S
++ fi
++
++ if test -f "$nlist"S; then
++ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
++ else
++ echo '/* NONE */' >> "$output_objdir/$dlsyms"
++ fi
++
++ $echo >> "$output_objdir/$dlsyms" "\
++
++#undef lt_preloaded_symbols
++
++#if defined (__STDC__) && __STDC__
++# define lt_ptr_t void *
++#else
++# define lt_ptr_t char *
++# define const
++#endif
++
++/* The mapping between symbol names and symbols. */
++const struct {
++ const char *name;
++ lt_ptr_t address;
++}
++lt_preloaded_symbols[] =
++{\
++"
++
++ sed -n -e 's/^: \([^ ]*\) $/ {\"\1\", (lt_ptr_t) 0},/p' \
++ -e 's/^. \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr_t) \&\2},/p' \
++ < "$nlist" >> "$output_objdir/$dlsyms"
++
++ $echo >> "$output_objdir/$dlsyms" "\
++ {0, (lt_ptr_t) 0}
++};
++
++/* This works around a problem in FreeBSD linker */
++#ifdef FREEBSD_WORKAROUND
++static const void *lt_preloaded_setup() {
++ return lt_preloaded_symbols;
++}
++#endif
++
++#ifdef __cplusplus
++}
++#endif\
++"
++ fi
++
++ pic_flag_for_symtable=
++ case $host in
++ # compiling the symbol table file with pic_flag works around
++ # a FreeBSD bug that causes programs to crash when -lm is
++ # linked before any other PIC object. But we must not use
++ # pic_flag when linking with -static. The problem exists in
++ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
++ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
++ case "$compile_command " in
++ *" -static "*) ;;
++ *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";;
++ esac;;
++ *-*-hpux*)
++ case "$compile_command " in
++ *" -static "*) ;;
++ *) pic_flag_for_symtable=" $pic_flag -DPIC";;
++ esac
++ esac
++
++ # Now compile the dynamic symbol file.
++ $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
++ $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
++
++ # Clean up the generated files.
++ $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
++ $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
++
++ # Transform the symbol file into the correct name.
++ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
++ ;;
++ *)
++ $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
++ exit 1
++ ;;
++ esac
++ else
++ # We keep going just in case the user didn't refer to
++ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
++ # really was required.
++
++ # Nullify the symbol file.
++ compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
++ fi
++
++ if test $need_relink = no || test "$build_libtool_libs" != yes; then
++ # Replace the output file specification.
++ compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
++ link_command="$compile_command$compile_rpath"
++
++ # We have no uninstalled library dependencies, so finalize right now.
++ $show "$link_command"
++ $run eval "$link_command"
++ status=$?
++
++ # Delete the generated files.
++ if test -n "$dlsyms"; then
++ $show "$rm $output_objdir/${outputname}S.${objext}"
++ $run $rm "$output_objdir/${outputname}S.${objext}"
++ fi
++
++ exit $status
++ fi
++
++ if test -n "$shlibpath_var"; then
++ # We should set the shlibpath_var
++ rpath=
++ for dir in $temp_rpath; do
++ case $dir in
++ [\\/]* | [A-Za-z]:[\\/]*)
++ # Absolute path.
++ rpath="$rpath$dir:"
++ ;;
++ *)
++ # Relative path: add a thisdir entry.
++ rpath="$rpath\$thisdir/$dir:"
++ ;;
++ esac
++ done
++ temp_rpath="$rpath"
++ fi
++
++ if test -n "$compile_shlibpath$finalize_shlibpath"; then
++ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
++ fi
++ if test -n "$finalize_shlibpath"; then
++ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
++ fi
++
++ compile_var=
++ finalize_var=
++ if test -n "$runpath_var"; then
++ if test -n "$perm_rpath"; then
++ # We should set the runpath_var.
++ rpath=
++ for dir in $perm_rpath; do
++ rpath="$rpath$dir:"
++ done
++ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
++ fi
++ if test -n "$finalize_perm_rpath"; then
++ # We should set the runpath_var.
++ rpath=
++ for dir in $finalize_perm_rpath; do
++ rpath="$rpath$dir:"
++ done
++ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
++ fi
++ fi
++
++ if test "$no_install" = yes; then
++ # We don't need to create a wrapper script.
++ link_command="$compile_var$compile_command$compile_rpath"
++ # Replace the output file specification.
++ link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
++ # Delete the old output file.
++ $run $rm $output
++ # Link the executable and exit
++ $show "$link_command"
++ $run eval "$link_command" || exit $?
++ exit 0
++ fi
++
++ if test "$hardcode_action" = relink; then
++ # Fast installation is not supported
++ link_command="$compile_var$compile_command$compile_rpath"
++ relink_command="$finalize_var$finalize_command$finalize_rpath"
++
++ $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
++ $echo "$modename: \`$output' will be relinked during installation" 1>&2
++ else
++ if test "$fast_install" != no; then
++ link_command="$finalize_var$compile_command$finalize_rpath"
++ if test "$fast_install" = yes; then
++ relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
++ else
++ # fast_install is set to needless
++ relink_command=
++ fi
++ else
++ link_command="$compile_var$compile_command$compile_rpath"
++ relink_command="$finalize_var$finalize_command$finalize_rpath"
++ fi
++ fi
++
++ # Replace the output file specification.
++ link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
++
++ # Delete the old output files.
++ $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
++
++ $show "$link_command"
++ $run eval "$link_command" || exit $?
++
++ # Now create the wrapper script.
++ $show "creating $output"
++
++ # Quote the relink command for shipping.
++ if test -n "$relink_command"; then
++ # Preserve any variables that may affect compiler behavior
++ for var in $variables_saved_for_relink; do
++ if eval test -z \"\${$var+set}\"; then
++ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
++ elif eval var_value=\$$var; test -z "$var_value"; then
++ relink_command="$var=; export $var; $relink_command"
++ else
++ var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
++ relink_command="$var=\"$var_value\"; export $var; $relink_command"
++ fi
++ done
++ relink_command="cd `pwd`; $relink_command"
++ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
++ fi
++
++ # Quote $echo for shipping.
++ if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
++ case $0 in
++ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
++ *) qecho="$SHELL `pwd`/$0 --fallback-echo";;
++ esac
++ qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
++ else
++ qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
++ fi
++
++ # Only actually do things if our run command is non-null.
++ if test -z "$run"; then
++ # win32 will think the script is a binary if it has
++ # a .exe suffix, so we strip it off here.
++ case $output in
++ *.exe) output=`echo $output|sed 's,.exe$,,'` ;;
++ esac
++ # test for cygwin because mv fails w/o .exe extensions
++ case $host in
++ *cygwin*) exeext=.exe ;;
++ *) exeext= ;;
++ esac
++ $rm $output
++ trap "$rm $output; exit 1" 1 2 15
++
++ $echo > $output "\
++#! $SHELL
++
++# $output - temporary wrapper script for $objdir/$outputname
++# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
++#
++# The $output program cannot be directly executed until all the libtool
++# libraries that it depends on are installed.
++#
++# This wrapper script should never be moved out of the build directory.
++# If it is, it will not operate correctly.
++
++# Sed substitution that helps us do robust quoting. It backslashifies
++# metacharacters that are still active within double-quoted strings.
++Xsed='sed -e 1s/^X//'
++sed_quote_subst='$sed_quote_subst'
++
++# The HP-UX ksh and POSIX shell print the target directory to stdout
++# if CDPATH is set.
++if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
++
++relink_command=\"$relink_command\"
++
++# This environment variable determines our operation mode.
++if test \"\$libtool_install_magic\" = \"$magic\"; then
++ # install mode needs the following variable:
++ notinst_deplibs='$notinst_deplibs'
++else
++ # When we are sourced in execute mode, \$file and \$echo are already set.
++ if test \"\$libtool_execute_magic\" != \"$magic\"; then
++ echo=\"$qecho\"
++ file=\"\$0\"
++ # Make sure echo works.
++ if test \"X\$1\" = X--no-reexec; then
++ # Discard the --no-reexec flag, and continue.
++ shift
++ elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
++ # Yippee, \$echo works!
++ :
++ else
++ # Restart under the correct shell, and then maybe \$echo will work.
++ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
++ fi
++ fi\
++"
++ $echo >> $output "\
++
++ # Find the directory that this script lives in.
++ thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
++ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
++
++ # Follow symbolic links until we get to the real thisdir.
++ file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\`
++ while test -n \"\$file\"; do
++ destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
++
++ # If there was a directory component, then change thisdir.
++ if test \"x\$destdir\" != \"x\$file\"; then
++ case \"\$destdir\" in
++ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
++ *) thisdir=\"\$thisdir/\$destdir\" ;;
++ esac
++ fi
++
++ file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
++ file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\`
++ done
++
++ # Try to get the absolute directory name.
++ absdir=\`cd \"\$thisdir\" && pwd\`
++ test -n \"\$absdir\" && thisdir=\"\$absdir\"
++"
++
++ if test "$fast_install" = yes; then
++ echo >> $output "\
++ program=lt-'$outputname'$exeext
++ progdir=\"\$thisdir/$objdir\"
++
++ if test ! -f \"\$progdir/\$program\" || \\
++ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\
++ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
++
++ file=\"\$\$-\$program\"
++
++ if test ! -d \"\$progdir\"; then
++ $mkdir \"\$progdir\"
++ else
++ $rm \"\$progdir/\$file\"
++ fi"
++
++ echo >> $output "\
++
++ # relink executable if necessary
++ if test -n \"\$relink_command\"; then
++ if (eval \$relink_command); then :
++ else
++ $rm \"\$progdir/\$file\"
++ exit 1
++ fi
++ fi
++
++ $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
++ { $rm \"\$progdir/\$program\";
++ $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
++ $rm \"\$progdir/\$file\"
++ fi"
++ else
++ echo >> $output "\
++ program='$outputname'
++ progdir=\"\$thisdir/$objdir\"
++"
++ fi
++
++ echo >> $output "\
++
++ if test -f \"\$progdir/\$program\"; then"
++
++ # Export our shlibpath_var if we have one.
++ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
++ $echo >> $output "\
++ # Add our own library path to $shlibpath_var
++ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
++
++ # Some systems cannot cope with colon-terminated $shlibpath_var
++ # The second colon is a workaround for a bug in BeOS R4 sed
++ $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
++
++ export $shlibpath_var
++"
++ fi
++
++ # fixup the dll searchpath if we need to.
++ if test -n "$dllsearchpath"; then
++ $echo >> $output "\
++ # Add the dll search path components to the executable PATH
++ PATH=$dllsearchpath:\$PATH
++"
++ fi
++
++ $echo >> $output "\
++ if test \"\$libtool_execute_magic\" != \"$magic\"; then
++ # Run the actual program with our arguments.
++"
++ case $host in
++ # win32 systems need to use the prog path for dll
++ # lookup to work
++ *-*-cygwin* | *-*-pw32*)
++ $echo >> $output "\
++ exec \$progdir/\$program \${1+\"\$@\"}
++"
++ ;;
++
++ # Backslashes separate directories on plain windows
++ *-*-mingw | *-*-os2*)
++ $echo >> $output "\
++ exec \$progdir\\\\\$program \${1+\"\$@\"}
++"
++ ;;
++
++ *)
++ $echo >> $output "\
++ # Export the path to the program.
++ PATH=\"\$progdir:\$PATH\"
++ export PATH
++
++ exec \$program \${1+\"\$@\"}
++"
++ ;;
++ esac
++ $echo >> $output "\
++ \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
++ exit 1
++ fi
++ else
++ # The program doesn't exist.
++ \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
++ \$echo \"This script is just a wrapper for \$program.\" 1>&2
++ echo \"See the $PACKAGE documentation for more information.\" 1>&2
++ exit 1
++ fi
++fi\
++"
++ chmod +x $output
++ fi
++ exit 0
++ ;;
++ esac
++
++ # See if we need to build an old-fashioned archive.
++ for oldlib in $oldlibs; do
++
++ if test "$build_libtool_libs" = convenience; then
++ oldobjs="$libobjs_save"
++ addlibs="$convenience"
++ build_libtool_libs=no
++ else
++ if test "$build_libtool_libs" = module; then
++ oldobjs="$libobjs_save"
++ build_libtool_libs=no
++ else
++ oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`
++ fi
++ addlibs="$old_convenience"
++ fi
++
++ if test -n "$addlibs"; then
++ gentop="$output_objdir/${outputname}x"
++ $show "${rm}r $gentop"
++ $run ${rm}r "$gentop"
++ $show "mkdir $gentop"
++ $run mkdir "$gentop"
++ status=$?
++ if test $status -ne 0 && test ! -d "$gentop"; then
++ exit $status
++ fi
++ generated="$generated $gentop"
++
++ # Add in members from convenience archives.
++ for xlib in $addlibs; do
++ # Extract the objects.
++ case $xlib in
++ [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
++ *) xabs=`pwd`"/$xlib" ;;
++ esac
++ xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
++ xdir="$gentop/$xlib"
++
++ $show "${rm}r $xdir"
++ $run ${rm}r "$xdir"
++ $show "mkdir $xdir"
++ $run mkdir "$xdir"
++ status=$?
++ if test $status -ne 0 && test ! -d "$xdir"; then
++ exit $status
++ fi
++ $show "(cd $xdir && $AR x $xabs)"
++ $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
++
++ oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
++ done
++ fi
++
++ # Do each command in the archive commands.
++ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
++ eval cmds=\"$old_archive_from_new_cmds\"
++ else
++ # Ensure that we have .o objects in place in case we decided
++ # not to build a shared library, and have fallen back to building
++ # static libs even though --disable-static was passed!
++ for oldobj in $oldobjs; do
++ if test ! -f $oldobj; then
++ xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'`
++ if test "X$xdir" = "X$oldobj"; then
++ xdir="."
++ else
++ xdir="$xdir"
++ fi
++ baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'`
++ obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"`
++ $show "(cd $xdir && ${LN_S} $obj $baseobj)"
++ $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $?
++ fi
++ done
++
++ eval cmds=\"$old_archive_cmds\"
++ fi
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
++ done
++ IFS="$save_ifs"
++ done
++
++ if test -n "$generated"; then
++ $show "${rm}r$generated"
++ $run ${rm}r$generated
++ fi
++
++ # Now create the libtool archive.
++ case $output in
++ *.la)
++ old_library=
++ test "$build_old_libs" = yes && old_library="$libname.$libext"
++ $show "creating $output"
++
++ # Preserve any variables that may affect compiler behavior
++ for var in $variables_saved_for_relink; do
++ if eval test -z \"\${$var+set}\"; then
++ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
++ elif eval var_value=\$$var; test -z "$var_value"; then
++ relink_command="$var=; export $var; $relink_command"
++ else
++ var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
++ relink_command="$var=\"$var_value\"; export $var; $relink_command"
++ fi
++ done
++ # Quote the link command for shipping.
++ relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args"
++ relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
++
++ # Only create the output if not a dry run.
++ if test -z "$run"; then
++ for installed in no yes; do
++ if test "$installed" = yes; then
++ if test -z "$install_libdir"; then
++ break
++ fi
++ output="$output_objdir/$outputname"i
++ # Replace all uninstalled libtool libraries with the installed ones
++ newdependency_libs=
++ for deplib in $dependency_libs; do
++ case $deplib in
++ *.la)
++ name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
++ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
++ if test -z "$libdir"; then
++ $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
++ exit 1
++ fi
++ newdependency_libs="$newdependency_libs $libdir/$name"
++ ;;
++ *) newdependency_libs="$newdependency_libs $deplib" ;;
++ esac
++ done
++ dependency_libs="$newdependency_libs"
++ newdlfiles=
++ for lib in $dlfiles; do
++ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
++ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
++ if test -z "$libdir"; then
++ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
++ exit 1
++ fi
++ newdlfiles="$newdlfiles $libdir/$name"
++ done
++ dlfiles="$newdlfiles"
++ newdlprefiles=
++ for lib in $dlprefiles; do
++ name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
++ eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
++ if test -z "$libdir"; then
++ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
++ exit 1
++ fi
++ newdlprefiles="$newdlprefiles $libdir/$name"
++ done
++ dlprefiles="$newdlprefiles"
++ fi
++ $rm $output
++ # place dlname in correct position for cygwin
++ tdlname=$dlname
++ case $host,$output,$installed,$module,$dlname in
++ *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
++ esac
++ $echo > $output "\
++# $outputname - a libtool library file
++# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
++#
++# Please DO NOT delete this file!
++# It is necessary for linking the library.
++
++# The name that we can dlopen(3).
++dlname='$tdlname'
++
++# Names of this library.
++library_names='$library_names'
++
++# The name of the static archive.
++old_library='$old_library'
++
++# Libraries that this one depends upon.
++dependency_libs='$dependency_libs'
++
++# Version information for $libname.
++current=$current
++age=$age
++revision=$revision
++
++# Is this an already installed library?
++installed=$installed
++
++# Files to dlopen/dlpreopen
++dlopen='$dlfiles'
++dlpreopen='$dlprefiles'
++
++# Directory that this library needs to be installed in:
++libdir='$install_libdir'"
++ if test "$installed" = no && test $need_relink = yes; then
++ $echo >> $output "\
++relink_command=\"$relink_command\""
++ fi
++ done
++ fi
++
++ # Do a symbolic link so that the libtool archive can be found in
++ # LD_LIBRARY_PATH before the program is installed.
++ $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
++ $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
++ ;;
++ esac
++ exit 0
++ ;;
++
++ # libtool install mode
++ install)
++ modename="$modename: install"
++
++ # There may be an optional sh(1) argument at the beginning of
++ # install_prog (especially on Windows NT).
++ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
++ # Allow the use of GNU shtool's install command.
++ $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
++ # Aesthetically quote it.
++ arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
++ arg="\"$arg\""
++ ;;
++ esac
++ install_prog="$arg "
++ arg="$1"
++ shift
++ else
++ install_prog=
++ arg="$nonopt"
++ fi
++
++ # The real first argument should be the name of the installation program.
++ # Aesthetically quote it.
++ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
++ arg="\"$arg\""
++ ;;
++ esac
++ install_prog="$install_prog$arg"
++
++ # We need to accept at least all the BSD install flags.
++ dest=
++ files=
++ opts=
++ prev=
++ install_type=
++ isdir=no
++ stripme=
++ for arg
++ do
++ if test -n "$dest"; then
++ files="$files $dest"
++ dest="$arg"
++ continue
++ fi
++
++ case $arg in
++ -d) isdir=yes ;;
++ -f) prev="-f" ;;
++ -g) prev="-g" ;;
++ -m) prev="-m" ;;
++ -o) prev="-o" ;;
++ -s)
++ stripme=" -s"
++ continue
++ ;;
++ -*) ;;
++
++ *)
++ # If the previous option needed an argument, then skip it.
++ if test -n "$prev"; then
++ prev=
++ else
++ dest="$arg"
++ continue
++ fi
++ ;;
++ esac
++
++ # Aesthetically quote the argument.
++ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
++ case $arg in
++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
++ arg="\"$arg\""
++ ;;
++ esac
++ install_prog="$install_prog $arg"
++ done
++
++ if test -z "$install_prog"; then
++ $echo "$modename: you must specify an install program" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ if test -n "$prev"; then
++ $echo "$modename: the \`$prev' option requires an argument" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ if test -z "$files"; then
++ if test -z "$dest"; then
++ $echo "$modename: no file or destination specified" 1>&2
++ else
++ $echo "$modename: you must specify a destination" 1>&2
++ fi
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ # Strip any trailing slash from the destination.
++ dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
++
++ # Check to see that the destination is a directory.
++ test -d "$dest" && isdir=yes
++ if test "$isdir" = yes; then
++ destdir="$dest"
++ destname=
++ else
++ destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
++ test "X$destdir" = "X$dest" && destdir=.
++ destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
++
++ # Not a directory, so check to see that there is only one file specified.
++ set dummy $files
++ if test $# -gt 2; then
++ $echo "$modename: \`$dest' is not a directory" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++ fi
++ case $destdir in
++ [\\/]* | [A-Za-z]:[\\/]*) ;;
++ *)
++ for file in $files; do
++ case $file in
++ *.lo) ;;
++ *)
++ $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ ;;
++ esac
++ done
++ ;;
++ esac
++
++ # This variable tells wrapper scripts just to set variables rather
++ # than running their programs.
++ libtool_install_magic="$magic"
++
++ staticlibs=
++ future_libdirs=
++ current_libdirs=
++ for file in $files; do
++
++ # Do each installation.
++ case $file in
++ *.$libext)
++ # Do the static libraries later.
++ staticlibs="$staticlibs $file"
++ ;;
++
++ *.la)
++ # Check to see that this really is a libtool archive.
++ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
++ else
++ $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ library_names=
++ old_library=
++ relink_command=
++ # If there is no directory component, then add one.
++ case $file in
++ */* | *\\*) . $file ;;
++ *) . ./$file ;;
++ esac
++
++ # Add the libdir to current_libdirs if it is the destination.
++ if test "X$destdir" = "X$libdir"; then
++ case "$current_libdirs " in
++ *" $libdir "*) ;;
++ *) current_libdirs="$current_libdirs $libdir" ;;
++ esac
++ else
++ # Note the libdir as a future libdir.
++ case "$future_libdirs " in
++ *" $libdir "*) ;;
++ *) future_libdirs="$future_libdirs $libdir" ;;
++ esac
++ fi
++
++ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
++ test "X$dir" = "X$file/" && dir=
++ dir="$dir$objdir"
++
++ if test -n "$relink_command"; then
++ $echo "$modename: warning: relinking \`$file'" 1>&2
++ $show "$relink_command"
++ if $run eval "$relink_command"; then :
++ else
++ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
++ continue
++ fi
++ fi
++
++ # See the names of the shared library.
++ set dummy $library_names
++ if test -n "$2"; then
++ realname="$2"
++ shift
++ shift
++
++ srcname="$realname"
++ test -n "$relink_command" && srcname="$realname"T
++
++ # Install the shared library and build the symlinks.
++ $show "$install_prog $dir/$srcname $destdir/$realname"
++ $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
++ if test -n "$stripme" && test -n "$striplib"; then
++ $show "$striplib $destdir/$realname"
++ $run eval "$striplib $destdir/$realname" || exit $?
++ fi
++
++ if test $# -gt 0; then
++ # Delete the old symlinks, and create new ones.
++ for linkname
++ do
++ if test "$linkname" != "$realname"; then
++ $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
++ $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
++ fi
++ done
++ fi
++
++ # Do each command in the postinstall commands.
++ lib="$destdir/$realname"
++ eval cmds=\"$postinstall_cmds\"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
++ done
++ IFS="$save_ifs"
++ fi
++
++ # Install the pseudo-library for information purposes.
++ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
++ instname="$dir/$name"i
++ $show "$install_prog $instname $destdir/$name"
++ $run eval "$install_prog $instname $destdir/$name" || exit $?
++
++ # Maybe install the static library, too.
++ test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
++ ;;
++
++ *.lo)
++ # Install (i.e. copy) a libtool object.
++
++ # Figure out destination file name, if it wasn't already specified.
++ if test -n "$destname"; then
++ destfile="$destdir/$destname"
++ else
++ destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
++ destfile="$destdir/$destfile"
++ fi
++
++ # Deduce the name of the destination old-style object file.
++ case $destfile in
++ *.lo)
++ staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
++ ;;
++ *.$objext)
++ staticdest="$destfile"
++ destfile=
++ ;;
++ *)
++ $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ ;;
++ esac
++
++ # Install the libtool object if requested.
++ if test -n "$destfile"; then
++ $show "$install_prog $file $destfile"
++ $run eval "$install_prog $file $destfile" || exit $?
++ fi
++
++ # Install the old object if enabled.
++ if test "$build_old_libs" = yes; then
++ # Deduce the name of the old-style object file.
++ staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
++
++ $show "$install_prog $staticobj $staticdest"
++ $run eval "$install_prog \$staticobj \$staticdest" || exit $?
++ fi
++ exit 0
++ ;;
++
++ *)
++ # Figure out destination file name, if it wasn't already specified.
++ if test -n "$destname"; then
++ destfile="$destdir/$destname"
++ else
++ destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
++ destfile="$destdir/$destfile"
++ fi
++
++ # Do a test to see if this is really a libtool program.
++ if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++ notinst_deplibs=
++ relink_command=
++
++ # If there is no directory component, then add one.
++ case $file in
++ */* | *\\*) . $file ;;
++ *) . ./$file ;;
++ esac
++
++ # Check the variables that should have been set.
++ if test -z "$notinst_deplibs"; then
++ $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2
++ exit 1
++ fi
++
++ finalize=yes
++ for lib in $notinst_deplibs; do
++ # Check to see that each library is installed.
++ libdir=
++ if test -f "$lib"; then
++ # If there is no directory component, then add one.
++ case $lib in
++ */* | *\\*) . $lib ;;
++ *) . ./$lib ;;
++ esac
++ fi
++ libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
++ if test -n "$libdir" && test ! -f "$libfile"; then
++ $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
++ finalize=no
++ fi
++ done
++
++ relink_command=
++ # If there is no directory component, then add one.
++ case $file in
++ */* | *\\*) . $file ;;
++ *) . ./$file ;;
++ esac
++
++ outputname=
++ if test "$fast_install" = no && test -n "$relink_command"; then
++ if test "$finalize" = yes && test -z "$run"; then
++ tmpdir="/tmp"
++ test -n "$TMPDIR" && tmpdir="$TMPDIR"
++ tmpdir="$tmpdir/libtool-$$"
++ if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
++ else
++ $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
++ continue
++ fi
++ file=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
++ outputname="$tmpdir/$file"
++ # Replace the output file specification.
++ relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
++
++ $show "$relink_command"
++ if $run eval "$relink_command"; then :
++ else
++ $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
++ ${rm}r "$tmpdir"
++ continue
++ fi
++ file="$outputname"
++ else
++ $echo "$modename: warning: cannot relink \`$file'" 1>&2
++ fi
++ else
++ # Install the binary that we compiled earlier.
++ file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
++ fi
++ fi
++
++ # remove .exe since cygwin /usr/bin/install will append another
++ # one anyways
++ case $install_prog,$host in
++ /usr/bin/install*,*cygwin*)
++ case $file:$destfile in
++ *.exe:*.exe)
++ # this is ok
++ ;;
++ *.exe:*)
++ destfile=$destfile.exe
++ ;;
++ *:*.exe)
++ destfile=`echo $destfile | sed -e 's,.exe$,,'`
++ ;;
++ esac
++ ;;
++ esac
++ $show "$install_prog$stripme $file $destfile"
++ $run eval "$install_prog\$stripme \$file \$destfile" || exit $?
++ test -n "$outputname" && ${rm}r "$tmpdir"
++ ;;
++ esac
++ done
++
++ for file in $staticlibs; do
++ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
++
++ # Set up the ranlib parameters.
++ oldlib="$destdir/$name"
++
++ $show "$install_prog $file $oldlib"
++ $run eval "$install_prog \$file \$oldlib" || exit $?
++
++ if test -n "$stripme" && test -n "$striplib"; then
++ $show "$old_striplib $oldlib"
++ $run eval "$old_striplib $oldlib" || exit $?
++ fi
++
++ # Do each command in the postinstall commands.
++ eval cmds=\"$old_postinstall_cmds\"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || exit $?
++ done
++ IFS="$save_ifs"
++ done
++
++ if test -n "$future_libdirs"; then
++ $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
++ fi
++
++ if test -n "$current_libdirs"; then
++ # Maybe just do a dry run.
++ test -n "$run" && current_libdirs=" -n$current_libdirs"
++ exec $SHELL $0 --finish$current_libdirs
++ exit 1
++ fi
++
++ exit 0
++ ;;
++
++ # libtool finish mode
++ finish)
++ modename="$modename: finish"
++ libdirs="$nonopt"
++ admincmds=
++
++ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
++ for dir
++ do
++ libdirs="$libdirs $dir"
++ done
++
++ for libdir in $libdirs; do
++ if test -n "$finish_cmds"; then
++ # Do each command in the finish commands.
++ eval cmds=\"$finish_cmds\"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd" || admincmds="$admincmds
++ $cmd"
++ done
++ IFS="$save_ifs"
++ fi
++ if test -n "$finish_eval"; then
++ # Do the single finish_eval.
++ eval cmds=\"$finish_eval\"
++ $run eval "$cmds" || admincmds="$admincmds
++ $cmds"
++ fi
++ done
++ fi
++
++ # Exit here if they wanted silent mode.
++ test "$show" = ":" && exit 0
++
++ echo "----------------------------------------------------------------------"
++ echo "Libraries have been installed in:"
++ for libdir in $libdirs; do
++ echo " $libdir"
++ done
++ echo
++ echo "If you ever happen to want to link against installed libraries"
++ echo "in a given directory, LIBDIR, you must either use libtool, and"
++ echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
++ echo "flag during linking and do at least one of the following:"
++ if test -n "$shlibpath_var"; then
++ echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
++ echo " during execution"
++ fi
++ if test -n "$runpath_var"; then
++ echo " - add LIBDIR to the \`$runpath_var' environment variable"
++ echo " during linking"
++ fi
++ if test -n "$hardcode_libdir_flag_spec"; then
++ libdir=LIBDIR
++ eval flag=\"$hardcode_libdir_flag_spec\"
++
++ echo " - use the \`$flag' linker flag"
++ fi
++ if test -n "$admincmds"; then
++ echo " - have your system administrator run these commands:$admincmds"
++ fi
++ if test -f /etc/ld.so.conf; then
++ echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
++ fi
++ echo
++ echo "See any operating system documentation about shared libraries for"
++ echo "more information, such as the ld(1) and ld.so(8) manual pages."
++ echo "----------------------------------------------------------------------"
++ exit 0
++ ;;
++
++ # libtool execute mode
++ execute)
++ modename="$modename: execute"
++
++ # The first argument is the command name.
++ cmd="$nonopt"
++ if test -z "$cmd"; then
++ $echo "$modename: you must specify a COMMAND" 1>&2
++ $echo "$help"
++ exit 1
++ fi
++
++ # Handle -dlopen flags immediately.
++ for file in $execute_dlfiles; do
++ if test ! -f "$file"; then
++ $echo "$modename: \`$file' is not a file" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ dir=
++ case $file in
++ *.la)
++ # Check to see that this really is a libtool archive.
++ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
++ else
++ $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ # Read the libtool library.
++ dlname=
++ library_names=
++
++ # If there is no directory component, then add one.
++ case $file in
++ */* | *\\*) . $file ;;
++ *) . ./$file ;;
++ esac
++
++ # Skip this library if it cannot be dlopened.
++ if test -z "$dlname"; then
++ # Warn if it was a shared library.
++ test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
++ continue
++ fi
++
++ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
++ test "X$dir" = "X$file" && dir=.
++
++ if test -f "$dir/$objdir/$dlname"; then
++ dir="$dir/$objdir"
++ else
++ $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
++ exit 1
++ fi
++ ;;
++
++ *.lo)
++ # Just add the directory containing the .lo file.
++ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
++ test "X$dir" = "X$file" && dir=.
++ ;;
++
++ *)
++ $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
++ continue
++ ;;
++ esac
++
++ # Get the absolute pathname.
++ absdir=`cd "$dir" && pwd`
++ test -n "$absdir" && dir="$absdir"
++
++ # Now add the directory to shlibpath_var.
++ if eval "test -z \"\$$shlibpath_var\""; then
++ eval "$shlibpath_var=\"\$dir\""
++ else
++ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
++ fi
++ done
++
++ # This variable tells wrapper scripts just to set shlibpath_var
++ # rather than running their programs.
++ libtool_execute_magic="$magic"
++
++ # Check if any of the arguments is a wrapper script.
++ args=
++ for file
++ do
++ case $file in
++ -*) ;;
++ *)
++ # Do a test to see if this is really a libtool program.
++ if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++ # If there is no directory component, then add one.
++ case $file in
++ */* | *\\*) . $file ;;
++ *) . ./$file ;;
++ esac
++
++ # Transform arg to wrapped name.
++ file="$progdir/$program"
++ fi
++ ;;
++ esac
++ # Quote arguments (to preserve shell metacharacters).
++ file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
++ args="$args \"$file\""
++ done
++
++ if test -z "$run"; then
++ if test -n "$shlibpath_var"; then
++ # Export the shlibpath_var.
++ eval "export $shlibpath_var"
++ fi
++
++ # Restore saved enviroment variables
++ if test "${save_LC_ALL+set}" = set; then
++ LC_ALL="$save_LC_ALL"; export LC_ALL
++ fi
++ if test "${save_LANG+set}" = set; then
++ LANG="$save_LANG"; export LANG
++ fi
++
++ # Now actually exec the command.
++ eval "exec \$cmd$args"
++
++ $echo "$modename: cannot exec \$cmd$args"
++ exit 1
++ else
++ # Display what would be done.
++ if test -n "$shlibpath_var"; then
++ eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
++ $echo "export $shlibpath_var"
++ fi
++ $echo "$cmd$args"
++ exit 0
++ fi
++ ;;
++
++ # libtool clean and uninstall mode
++ clean | uninstall)
++ modename="$modename: $mode"
++ rm="$nonopt"
++ files=
++ rmforce=
++ exit_status=0
++
++ # This variable tells wrapper scripts just to set variables rather
++ # than running their programs.
++ libtool_install_magic="$magic"
++
++ for arg
++ do
++ case $arg in
++ -f) rm="$rm $arg"; rmforce=yes ;;
++ -*) rm="$rm $arg" ;;
++ *) files="$files $arg" ;;
++ esac
++ done
++
++ if test -z "$rm"; then
++ $echo "$modename: you must specify an RM program" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ fi
++
++ rmdirs=
++
++ for file in $files; do
++ dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
++ if test "X$dir" = "X$file"; then
++ dir=.
++ objdir="$objdir"
++ else
++ objdir="$dir/$objdir"
++ fi
++ name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
++ test $mode = uninstall && objdir="$dir"
++
++ # Remember objdir for removal later, being careful to avoid duplicates
++ if test $mode = clean; then
++ case " $rmdirs " in
++ *" $objdir "*) ;;
++ *) rmdirs="$rmdirs $objdir" ;;
++ esac
++ fi
++
++ # Don't error if the file doesn't exist and rm -f was used.
++ if (test -L "$file") >/dev/null 2>&1 \
++ || (test -h "$file") >/dev/null 2>&1 \
++ || test -f "$file"; then
++ :
++ elif test -d "$file"; then
++ exit_status=1
++ continue
++ elif test "$rmforce" = yes; then
++ continue
++ fi
++
++ rmfiles="$file"
++
++ case $name in
++ *.la)
++ # Possibly a libtool archive, so verify it.
++ if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++ . $dir/$name
++
++ # Delete the libtool libraries and symlinks.
++ for n in $library_names; do
++ rmfiles="$rmfiles $objdir/$n"
++ done
++ test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
++ test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
++
++ if test $mode = uninstall; then
++ if test -n "$library_names"; then
++ # Do each command in the postuninstall commands.
++ eval cmds=\"$postuninstall_cmds\"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd"
++ if test $? != 0 && test "$rmforce" != yes; then
++ exit_status=1
++ fi
++ done
++ IFS="$save_ifs"
++ fi
++
++ if test -n "$old_library"; then
++ # Do each command in the old_postuninstall commands.
++ eval cmds=\"$old_postuninstall_cmds\"
++ IFS="${IFS= }"; save_ifs="$IFS"; IFS='~'
++ for cmd in $cmds; do
++ IFS="$save_ifs"
++ $show "$cmd"
++ $run eval "$cmd"
++ if test $? != 0 && test "$rmforce" != yes; then
++ exit_status=1
++ fi
++ done
++ IFS="$save_ifs"
++ fi
++ # FIXME: should reinstall the best remaining shared library.
++ fi
++ fi
++ ;;
++
++ *.lo)
++ if test "$build_old_libs" = yes; then
++ oldobj=`$echo "X$name" | $Xsed -e "$lo2o"`
++ rmfiles="$rmfiles $dir/$oldobj"
++ fi
++ ;;
++
++ *)
++ # Do a test to see if this is a libtool program.
++ if test $mode = clean &&
++ (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
++ relink_command=
++ . $dir/$file
++
++ rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
++ if test "$fast_install" = yes && test -n "$relink_command"; then
++ rmfiles="$rmfiles $objdir/lt-$name"
++ fi
++ fi
++ ;;
++ esac
++ $show "$rm $rmfiles"
++ $run $rm $rmfiles || exit_status=1
++ done
++
++ # Try to remove the ${objdir}s in the directories where we deleted files
++ for dir in $rmdirs; do
++ if test -d "$dir"; then
++ $show "rmdir $dir"
++ $run rmdir $dir >/dev/null 2>&1
++ fi
++ done
++
++ exit $exit_status
++ ;;
++
++ "")
++ $echo "$modename: you must specify a MODE" 1>&2
++ $echo "$generic_help" 1>&2
++ exit 1
++ ;;
++ esac
++
++ $echo "$modename: invalid operation mode \`$mode'" 1>&2
++ $echo "$generic_help" 1>&2
++ exit 1
++fi # test -z "$show_help"
++
++# We need to display help for each of the modes.
++case $mode in
++"") $echo \
++"Usage: $modename [OPTION]... [MODE-ARG]...
++
++Provide generalized library-building support services.
++
++ --config show all configuration variables
++ --debug enable verbose shell tracing
++-n, --dry-run display commands without modifying any files
++ --features display basic configuration information and exit
++ --finish same as \`--mode=finish'
++ --help display this help message and exit
++ --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
++ --quiet same as \`--silent'
++ --silent don't print informational messages
++ --version print version information
++
++MODE must be one of the following:
++
++ clean remove files from the build directory
++ compile compile a source file into a libtool object
++ execute automatically set library path, then run a program
++ finish complete the installation of libtool libraries
++ install install libraries or executables
++ link create a library or an executable
++ uninstall remove libraries from an installed directory
++
++MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
++a more detailed description of MODE."
++ exit 0
++ ;;
++
++clean)
++ $echo \
++"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
++
++Remove files from the build directory.
++
++RM is the name of the program to use to delete files associated with each FILE
++(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
++to RM.
++
++If FILE is a libtool library, object or program, all the files associated
++with it are deleted. Otherwise, only FILE itself is deleted using RM."
++ ;;
++
++compile)
++ $echo \
++"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
++
++Compile a source file into a libtool library object.
++
++This mode accepts the following additional options:
++
++ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
++ -prefer-pic try to building PIC objects only
++ -prefer-non-pic try to building non-PIC objects only
++ -static always build a \`.o' file suitable for static linking
++
++COMPILE-COMMAND is a command to be used in creating a \`standard' object file
++from the given SOURCEFILE.
++
++The output file name is determined by removing the directory component from
++SOURCEFILE, then substituting the C source code suffix \`.c' with the
++library object suffix, \`.lo'."
++ ;;
++
++execute)
++ $echo \
++"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
++
++Automatically set library path, then run a program.
++
++This mode accepts the following additional options:
++
++ -dlopen FILE add the directory containing FILE to the library path
++
++This mode sets the library path environment variable according to \`-dlopen'
++flags.
++
++If any of the ARGS are libtool executable wrappers, then they are translated
++into their corresponding uninstalled binary, and any of their required library
++directories are added to the library path.
++
++Then, COMMAND is executed, with ARGS as arguments."
++ ;;
++
++finish)
++ $echo \
++"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
++
++Complete the installation of libtool libraries.
++
++Each LIBDIR is a directory that contains libtool libraries.
++
++The commands that this mode executes may require superuser privileges. Use
++the \`--dry-run' option if you just want to see what would be executed."
++ ;;
++
++install)
++ $echo \
++"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
++
++Install executables or libraries.
++
++INSTALL-COMMAND is the installation command. The first component should be
++either the \`install' or \`cp' program.
++
++The rest of the components are interpreted as arguments to that command (only
++BSD-compatible install options are recognized)."
++ ;;
++
++link)
++ $echo \
++"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
++
++Link object files or libraries together to form another library, or to
++create an executable program.
++
++LINK-COMMAND is a command using the C compiler that you would use to create
++a program from several object files.
++
++The following components of LINK-COMMAND are treated specially:
++
++ -all-static do not do any dynamic linking at all
++ -avoid-version do not add a version suffix if possible
++ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
++ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
++ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
++ -export-symbols SYMFILE
++ try to export only the symbols listed in SYMFILE
++ -export-symbols-regex REGEX
++ try to export only the symbols matching REGEX
++ -LLIBDIR search LIBDIR for required installed libraries
++ -lNAME OUTPUT-FILE requires the installed library libNAME
++ -module build a library that can dlopened
++ -no-fast-install disable the fast-install mode
++ -no-install link a not-installable executable
++ -no-undefined declare that a library does not refer to external symbols
++ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
++ -release RELEASE specify package release information
++ -rpath LIBDIR the created library will eventually be installed in LIBDIR
++ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
++ -static do not do any dynamic linking of libtool libraries
++ -version-info CURRENT[:REVISION[:AGE]]
++ specify library version info [each variable defaults to 0]
++
++All other options (arguments beginning with \`-') are ignored.
++
++Every other argument is treated as a filename. Files ending in \`.la' are
++treated as uninstalled libtool libraries, other files are standard or library
++object files.
++
++If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
++only library objects (\`.lo' files) may be specified, and \`-rpath' is
++required, except when creating a convenience library.
++
++If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
++using \`ar' and \`ranlib', or on Windows using \`lib'.
++
++If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
++is created, otherwise an executable program is created."
++ ;;
++
++uninstall)
++ $echo \
++"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
++
++Remove libraries from an installation directory.
++
++RM is the name of the program to use to delete files associated with each FILE
++(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
++to RM.
++
++If FILE is a libtool library, all the files associated with it are deleted.
++Otherwise, only FILE itself is deleted using RM."
++ ;;
++
++*)
++ $echo "$modename: invalid operation mode \`$mode'" 1>&2
++ $echo "$help" 1>&2
++ exit 1
++ ;;
++esac
++
++echo
++$echo "Try \`$modename --help' for more information about other modes."
++
++exit 0
++
++# Local Variables:
++# mode:shell-script
++# sh-indentation:2
++# End:
diff --git a/meta/recipes-devtools/openjade/openjade-native_1.3.2.bb b/meta/recipes-devtools/openjade/openjade-native_1.3.2.bb
index 18d311e..0c4116d 100644
--- a/meta/recipes-devtools/openjade/openjade-native_1.3.2.bb
+++ b/meta/recipes-devtools/openjade/openjade-native_1.3.2.bb
@@ -7,12 +7,13 @@ SECTION = "base"
LICENSE = "BSD"
LIC_FILES_CHKSUM = "file://COPYING;md5=641ff1e4511f0a87044ad42f87cb1045"
-PR = "r4"
+PR = "r5"
DEPENDS = "opensp-native sgml-common-native"
RDEPENDS_${PN} = "sgml-common-native"
SRC_URI = "${SOURCEFORGE_MIRROR}/openjade/openjade-${PV}.tar.gz \
+ file://autoreconf.patch \
file://makefile.patch \
file://user-declared-default-constructor.patch"
--
1.7.2.5
^ permalink raw reply related [flat|nested] 9+ messages in thread