* Tar failed occasionally during the nativesdk toolchain build
@ 2013-03-27 10:55 Luo Zhenhua-B19537
2013-03-28 13:39 ` Richard Purdie
0 siblings, 1 reply; 3+ messages in thread
From: Luo Zhenhua-B19537 @ 2013-03-27 10:55 UTC (permalink / raw)
To: openembedded-core@lists.openembedded.org
Cc: Guo Chunrong-B40290, Liu Ting-B28495, Luo Zhenhua-B19537
When I build nativesdk toolchain, following build error appears sometimes, any suggestion to solve the issue?
"tar: ./sysroots/ppce500mc-fsl_networking-linux/var/lib/rpm/__db.002: file changed as we read it"
Thanks in advance.
Regards,
Zhenhua
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: Tar failed occasionally during the nativesdk toolchain build
2013-03-27 10:55 Tar failed occasionally during the nativesdk toolchain build Luo Zhenhua-B19537
@ 2013-03-28 13:39 ` Richard Purdie
2013-03-28 13:54 ` Luo Zhenhua-B19537
0 siblings, 1 reply; 3+ messages in thread
From: Richard Purdie @ 2013-03-28 13:39 UTC (permalink / raw)
To: Luo Zhenhua-B19537
Cc: Guo Chunrong-B40290, Liu Ting-B28495,
openembedded-core@lists.openembedded.org
On Wed, 2013-03-27 at 10:55 +0000, Luo Zhenhua-B19537 wrote:
> When I build nativesdk toolchain, following build error appears sometimes, any suggestion to solve the issue?
>
> "tar: ./sysroots/ppce500mc-fsl_networking-linux/var/lib/rpm/__db.002: file changed as we read it"
>
> Thanks in advance.
Sounds like something is still writing to the rpm database whilst we're
packaging it which would be bad.
More logs/information might help debug it further. Were you running
mutliple builds or just one sdk? meta-toolchain or populate_sdk? Really
need more info to help further.
Cheers,
Richard
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Tar failed occasionally during the nativesdk toolchain build
2013-03-28 13:39 ` Richard Purdie
@ 2013-03-28 13:54 ` Luo Zhenhua-B19537
0 siblings, 0 replies; 3+ messages in thread
From: Luo Zhenhua-B19537 @ 2013-03-28 13:54 UTC (permalink / raw)
To: Richard Purdie
Cc: Guo Chunrong-B40290, Liu Ting-B28495,
openembedded-core@lists.openembedded.org
> -----Original Message-----
> From: Richard Purdie [mailto:richard.purdie@linuxfoundation.org]
> Sent: Thursday, March 28, 2013 9:39 PM
>
> On Wed, 2013-03-27 at 10:55 +0000, Luo Zhenhua-B19537 wrote:
> > When I build nativesdk toolchain, following build error appears
> sometimes, any suggestion to solve the issue?
> >
> > "tar: ./sysroots/ppce500mc-fsl_networking-
> linux/var/lib/rpm/__db.002: file changed as we read it"
> >
> > Thanks in advance.
>
> Sounds like something is still writing to the rpm database whilst we're
> packaging it which would be bad.
>
> More logs/information might help debug it further.
[Luo Zhenhua-B19537] Hope following log helpful.
| DEBUG: Executing python function do_populate_sdk
| DEBUG: Executing shell function populate_sdk_image
| Previous repo file missing: /local/cache-build-32bit/poky/build_p4080ds_release_master/tmp/deploy/rpm/all/repodata/primary.xml.gz
| Previous repo file missing: /local/cache-build-32bit/poky/build_p4080ds_release_master/tmp/deploy/rpm/i686_nativesdk/repodata/primary.xml.gz
| Previous repo file missing: /local/cache-build-32bit/poky/build_p4080ds_release_master/tmp/deploy/rpm/p4080ds/repodata/primary.xml.gz
| Previous repo file missing: /local/cache-build-32bit/poky/build_p4080ds_release_master/tmp/deploy/rpm/ppce500mc/repodata/primary.xml.gz
| Note: configuring RPM platform settings
| Note: configuring RPM system provides
| Note: configuring RPM DB settings
| Note: configuring Smart settings
|
|
|
|
|
|
| Note: adding Smart channel p4080ds (35)
|
|
| Note: adding Smart channel ppce500mc (30)
|
|
| Note: adding Smart channel all (10)
|
|
| Note: configuring RPM cross-install scriptlet_wrapper
|
| Updating cache... ######################################## [100%]
|
| Saving cache...
|
| Note: adding Smart RPM DB channel
|
| Note: to be installed: eglibc-staticdev@ppce500mc libgomp-dev@ppce500mc libgomp1@ppce500mc dtc@ppce500mc libglib-2.0-dev@ppce500mc libgomp-staticdev@ppce500mc libglib-2.0-0@ppce500mc packagegroup-core-standalone-sdk-target@all libstdc++-staticdev@ppce500mc
| Loading cache...
| Updating cache... ######################################## [100%]
|
| Computing transaction...error: failed to open /etc/mtab: No such file or directory
|
Committing transaction...
| Preparing... ######################################## [ 0%]
| 1:Installing eglibc-gconv ######################################## [ 2%]
| 2:Installing eglibc-locale.. ######################################## [ 4%]
| 3:Installing libstdc++-sta.. ######################################## [ 6%]
| 4:Installing libc6 ######################################## [ 9%]
| 5:Installing eglibc-locale.. ######################################## [ 11%]
| 6:Installing eglibc-locale.. ######################################## [ 13%]
| 7:Installing eglibc-locale.. ######################################## [ 16%]
| 8:Installing eglibc-locale.. ######################################## [ 18%]
| 9:Installing libgomp-stati.. ######################################## [ 20%]
| 10:Installing linux-qoriq-s.. ######################################## [ 23%]
| 11:Installing eglibc-locale.. ######################################## [ 25%]
| 12:Installing eglibc-locale.. ######################################## [ 27%]
| 13:Installing eglibc-locale.. ######################################## [ 30%]
| 14:Installing libc6-dbg ######################################## [ 32%]
| 15:Installing eglibc-locale.. ######################################## [ 34%]
| 16:Installing eglibc-extra-.. ######################################## [ 37%]
| 17:Installing libgcc1 ######################################## [ 39%]
| 18:Installing eglibc-utils ######################################## [ 41%]
| 19:Installing libsegfault ######################################## [ 44%]
| 20:Installing eglibc-gconv-.. ######################################## [ 46%]
| 21:Installing libthread-db1 ######################################## [ 48%]
| 22:Installing libcidn1 ######################################## [ 51%]
| 23:Installing dtc ######################################## [ 53%]
| 24:Installing libz1 ######################################## [ 55%]
| 25:Installing eglibc-gconv-.. ######################################## [ 58%]
| 26:Installing libffi6 ######################################## [ 60%]
| 27:Installing eglibc-gconv-.. ######################################## [ 62%]
| 28:Installing eglibc-gconv-.. ######################################## [ 65%]
| 29:Installing eglibc-locale.. ######################################## [ 67%]
| 30:Installing eglibc-locale.. ######################################## [ 69%]
| 31:Installing libgomp1 ######################################## [ 72%]
| 32:Installing libstdc++6 ######################################## [ 74%]
| 33:Installing libgcc-s-dev ######################################## [ 76%]
| 34:Installing libc6-dev ######################################## [ 79%]
| 35:Installing libz-dev ######################################## [ 81%]
| 36:Installing libffi-dev ######################################## [ 83%]
| 37:Installing libglib-2.0-0 ######################################## [ 86%]
| 38:Installing eglibc-locale.. ######################################## [ 88%]
| 39:Installing libgomp-dev ######################################## [ 90%]
| 40:Installing libstdc++-dev ######################################## [ 93%]
| 41:Installing eglibc-static.. ######################################## [ 95%]
| 42:Installing libglib-2.0-dev ######################################## [ 97%]
| 43:Installing packagegroup-.. ######################################## [100%]
|
|
| Installing packages (43):
| dtc
| eglibc-extra-nss
| eglibc-gconv
| eglibc-gconv-cp1252
| eglibc-gconv-ibm850
| eglibc-gconv-iso8859-1
| eglibc-gconv-iso8859-15
| eglibc-localedata-i18n
| eglibc-localedata-iso14651-t1
| eglibc-localedata-iso14651-t1-common
| eglibc-localedata-translit-circle
| eglibc-localedata-translit-cjk-compat
| eglibc-localedata-translit-compat
| eglibc-localedata-translit-font
| eglibc-localedata-translit-fraction
| eglibc-localedata-translit-narrow
| eglibc-localedata-translit-neutral
| eglibc-localedata-translit-small
| eglibc-localedata-translit-wide
| eglibc-staticdev
| eglibc-utils
| libc6
| libc6-dbg
| libc6-dev
| libcidn1
| libffi-dev
| libffi6
| libgcc-s-dev
| libgcc1
| libglib-2.0-0
| libglib-2.0-dev
| libgomp-dev
| libgomp-staticdev
| libgomp1
| libsegfault
| libstdc++-dev
| libstdc++-staticdev
| libstdc++6
| libthread-db1
| libz-dev
| libz1
| linux-qoriq-sdk-headers-dev
| packagegroup-core-standalone-sdk-target
|
| 32.7MB of package files are needed. 105.3MB will be used.
|
|
| Saving cache...
|
| Installing NATIVESDK packages
| Note: configuring RPM platform settings
| Note: configuring RPM system provides
| Note: configuring RPM DB settings
| Note: configuring Smart settings
|
|
|
|
|
|
| Note: adding Smart channel i686_nativesdk (25)
|
|
| Note: adding Smart channel all (10)
|
|
| Note: configuring RPM cross-install scriptlet_wrapper
|
| Updating cache... ######################################## [100%]
|
| Saving cache...
|
| Note: adding Smart RPM DB channel
|
| Note: to be installed: packagegroup-cross-canadian-powerpc@all nativesdk-dtc@i686_nativesdk nativesdk-mux-server@i686_nativesdk nativesdk-cst@i686_nativesdk nativesdk-pme-regex-analyzer@i686_nativesdk
| Loading cache...
| Updating cache... ######################################## [100%]
|
| Computing transaction...error: failed to open /etc/mtab: No such file or directory
|
Committing transaction...
| Preparing... ######################################## [ 0%]
| 1:Installing nativesdk-pme.. ######################################## [ 2%]
| 2:Installing nativesdk-libc6 ######################################## [ 4%]
| 3:Installing nativesdk-ncu.. ######################################## [ 7%]
| 4:Installing nativesdk-pyt.. ######################################## [ 9%]
| 5:Installing meta-environm.. ######################################## [ 12%]
| 6:Installing nativesdk-lib.. ######################################## [ 14%]
| 7:Installing nativesdk-lib.. ######################################## [ 17%]
| 8:Installing nativesdk-mux.. ######################################## [ 19%]
| 9:Installing nativesdk-lib.. ######################################## [ 21%]
| 10:Installing nativesdk-lib.. ######################################## [ 24%]
| 11:Installing nativesdk-libz1 ######################################## [ 26%]
| 12:Installing nativesdk-dtc ######################################## [ 29%]
| 13:Installing nativesdk-lib.. ######################################## [ 31%]
| 14:Installing nativesdk-lib.. ######################################## [ 34%]
| 15:Installing nativesdk-lib.. ######################################## [ 36%]
| 16:Installing nativesdk-lib.. ######################################## [ 39%]
| 17:Installing binutils-cros.. ######################################## [ 41%]
| 18:Installing nativesdk-elf.. ######################################## [ 43%]
| 19:Installing nativesdk-lib.. ######################################## [ 46%]
| 20:Installing nativesdk-lib.. ######################################## [ 48%]
| 21:Installing nativesdk-lib.. ######################################## [ 51%]
| 22:Installing nativesdk-pyt.. ######################################## [ 53%]
| 23:Installing nativesdk-lib.. ######################################## [ 56%]
| 24:Installing nativesdk-ope.. ######################################## [ 58%]
| 25:Installing nativesdk-cst ######################################## [ 60%]
| 26:Installing nativesdk-pyt.. ######################################## [ 63%]
| 27:Installing gcc-cross-can.. ######################################## [ 65%]
| 28:Installing nativesdk-pyt.. ######################################## [ 68%]
| 29:Installing nativesdk-pyt.. ######################################## [ 70%]
| 30:Installing nativesdk-pyt.. ######################################## [ 73%]
| 31:Installing nativesdk-pyt.. ######################################## [ 75%]
| 32:Installing nativesdk-pyt.. ######################################## [ 78%]
| 33:Installing nativesdk-pyt.. ######################################## [ 80%]
| 34:Installing nativesdk-pyt.. ######################################## [ 82%]
| 35:Installing nativesdk-pyt.. ######################################## [ 85%]
| 36:Installing nativesdk-pyt.. ######################################## [ 87%]
| 37:Installing nativesdk-pyt.. ######################################## [ 90%]
| 38:Installing nativesdk-pyt.. ######################################## [ 92%]
| 39:Installing nativesdk-pyt.. ######################################## [ 95%]
| 40:Installing gdb-cross-can.. ######################################## [ 97%]
| 41:Installing packagegroup-.. ######################################## [100%]
|
|
| Installing packages (41):
| binutils-cross-canadian-powerpc nativesdk-mux-server
| gcc-cross-canadian-powerpc nativesdk-ncurses-terminfo-base
| gdb-cross-canadian-powerpc nativesdk-openssl
| meta-environment-powerpc nativesdk-pme-regex-analyzer
| nativesdk-cst nativesdk-python-codecs
| nativesdk-dtc nativesdk-python-core
| nativesdk-elfutils nativesdk-python-crypt
| nativesdk-libbz2-0 nativesdk-python-datetime
| nativesdk-libc6 nativesdk-python-io
| nativesdk-libcrypto1.0.0 nativesdk-python-lang
| nativesdk-libexpat1 nativesdk-python-logging
| nativesdk-libgmp10 nativesdk-python-math
| nativesdk-libmpc2 nativesdk-python-mime
| nativesdk-libmpfr4 nativesdk-python-netclient
| nativesdk-libncurses5 nativesdk-python-pickle
| nativesdk-libncursesw5 nativesdk-python-re
| nativesdk-libpython2.7-1.0 nativesdk-python-readline
| nativesdk-libreadline6 nativesdk-python-stringold
| nativesdk-libssl1.0.0 nativesdk-python-textutils
| nativesdk-libtinfo5 packagegroup-cross-canadian-powerpc
| nativesdk-libz1
|
| 34.6MB of package files are needed. 88.6MB will be used.
|
|
| Saving cache...
|
| log_check: Using /local/cache-build-32bit/poky/build_p4080ds_release_master/tmp/work/ppce500mc-fsl_networking-linux/fsl-toolchain/1.0-r7/temp/log.do_populate_sdk.11530 as logfile
| Logfile is clean
| DEBUG: Shell function populate_sdk_image finished
| DEBUG: SITE files ['endian-big', 'bit-32', 'powerpc-common', 'common-linux', 'common-glibc', 'powerpc32-linux', 'powerpc-linux', 'common']
| DEBUG: Executing shell function create_sdk_files
| DEBUG: Shell function create_sdk_files finished
| DEBUG: Executing shell function tar_sdk
| tar: ./sysroots/ppce500mc-fsl_networking-linux/var/lib/rpm/__db.002: file changed as we read it
| DEBUG: Python function do_populate_sdk finished
| ERROR: Function failed: tar_sdk (see /local/cache-build-32bit/poky/build_p4080ds_release_master/tmp/work/ppce500mc-fsl_networking-linux/fsl-toolchain/1.0-r7/temp/log.do_populate_sdk.11530 for further information)
> Were you running mutliple builds or just one sdk? meta-toolchain or populate_sdk? Really need more info to help further.
[Luo Zhenhua-B19537] I build only one customized toolchain based on meta-toolchain, following are the additional packages, "-j 24 -t 24" is used.
TOOLCHAIN_TARGET_TASK += " \
glib-2.0 \
glib-2.0-dev \
dtc \
libgomp \
libgomp-dev \
libgomp-staticdev \
libstdc++-staticdev \
${TCLIBC}-staticdev \
"
# FSL specific packages
TOOLCHAIN_TARGET_TASK += " \
nativesdk-mux-server \
nativesdk-cst \
nativesdk-pme-regex-analyzer \
TOOLCHAIN_HOST_TASK += " \
nativesdk-dtc \
"
Best Regards,
Zhenhua
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-03-28 14:11 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-03-27 10:55 Tar failed occasionally during the nativesdk toolchain build Luo Zhenhua-B19537
2013-03-28 13:39 ` Richard Purdie
2013-03-28 13:54 ` Luo Zhenhua-B19537
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox