Openembedded Core Discussions
 help / color / mirror / Atom feed
* [PATCH 1/4] xtscal: remove recipe
@ 2016-06-15 13:12 Maxin B. John
  2016-06-15 13:12 ` [PATCH 2/4] x11-common: replace xtscal with xinput-calibrator Maxin B. John
                   ` (2 more replies)
  0 siblings, 3 replies; 8+ messages in thread
From: Maxin B. John @ 2016-06-15 13:12 UTC (permalink / raw)
  To: openembedded-core

Remove xtscal in preference of xinput-calibrator

[YOCTO #9365]

Signed-off-by: Maxin B. John <maxin.john@intel.com>
---
 .../xtscal/xtscal/30xTs_Calibrate.sh               |  13 -
 .../xtscal/xtscal/change-cross.patch               |  18 -
 meta/recipes-graphics/xtscal/xtscal/cleanup.patch  | 621 ---------------------
 .../xtscal/dso_linking_change_build_fix.patch      |  27 -
 meta/recipes-graphics/xtscal/xtscal_0.6.3.bb       |  33 --
 5 files changed, 712 deletions(-)
 delete mode 100644 meta/recipes-graphics/xtscal/xtscal/30xTs_Calibrate.sh
 delete mode 100644 meta/recipes-graphics/xtscal/xtscal/change-cross.patch
 delete mode 100644 meta/recipes-graphics/xtscal/xtscal/cleanup.patch
 delete mode 100644 meta/recipes-graphics/xtscal/xtscal/dso_linking_change_build_fix.patch
 delete mode 100644 meta/recipes-graphics/xtscal/xtscal_0.6.3.bb

diff --git a/meta/recipes-graphics/xtscal/xtscal/30xTs_Calibrate.sh b/meta/recipes-graphics/xtscal/xtscal/30xTs_Calibrate.sh
deleted file mode 100644
index fa43617..0000000
--- a/meta/recipes-graphics/xtscal/xtscal/30xTs_Calibrate.sh
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/sh
-
-. /etc/formfactor/config
-
-if [ "$HAVE_TOUCHSCREEN" = "1" ]; then
-	n=1
-	while [ ! -z $TSLIB_TSDEVICE ] && [ ! -f /etc/pointercal ] && [ $n -le 5 ]
-	do
-	   /usr/bin/xtscal
-	   sleep 1
-	   n=$(($n+1))
-	done
-fi
diff --git a/meta/recipes-graphics/xtscal/xtscal/change-cross.patch b/meta/recipes-graphics/xtscal/xtscal/change-cross.patch
deleted file mode 100644
index 1da7717..0000000
--- a/meta/recipes-graphics/xtscal/xtscal/change-cross.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-Upstream-Status: Pending
-
---- tmp/main.c.orig	2007-01-02 15:39:54.000000000 +0000
-+++ tmp/main.c	2007-01-02 15:39:54.000000000 +0000
-@@ -131,9 +131,10 @@
- {
-   XRenderFillRectangles (dpy, PictOpSrc, pict, &rect_color, rectangles, 2);
- 
--  XFillArc (dpy, crosshair_w, crosshair_gc, (CROSSHAIR_SIZE / 2) - (WIDTH / 2) - 1, 
--	    (CROSSHAIR_SIZE / 2) - (WIDTH / 2) - 1,
--	    WIDTH + 1, WIDTH + 1, 0, 360 * 64);
-+  XFillRectangle (dpy, crosshair_w, crosshair_gc,
-+		  (CROSSHAIR_SIZE / 2) - (WIDTH / 2),
-+		  (CROSSHAIR_SIZE / 2) - (WIDTH / 2),
-+		  WIDTH, WIDTH);
- }
- 
- void
diff --git a/meta/recipes-graphics/xtscal/xtscal/cleanup.patch b/meta/recipes-graphics/xtscal/xtscal/cleanup.patch
deleted file mode 100644
index f7b0854..0000000
--- a/meta/recipes-graphics/xtscal/xtscal/cleanup.patch
+++ /dev/null
@@ -1,621 +0,0 @@
----
- Makefile.am  |    9 --
- configure.ac |    3 
- gpe-dist.am  |   12 ---
- h3600_ts.h   |  216 -----------------------------------------------------------
- main.c       |  210 ++-------------------------------------------------------
- xtscal.in    |   19 -----
- 6 files changed, 14 insertions(+), 455 deletions(-)
-
-Upstream-Status: Pending
-
-Index: xtscal-0.6.3/xtscal.in
-===================================================================
---- xtscal-0.6.3.orig/xtscal.in	2004-09-10 20:10:36.000000000 +0100
-+++ /dev/null	1970-01-01 00:00:00.000000000 +0000
-@@ -1,19 +0,0 @@
--#!/bin/sh
--
--module_id() {
--    # Get model name
--    echo `grep "^Hardware" /proc/cpuinfo | sed -e "s/.*: *//" | tr a-z A-Z`
--}
--
--case `module_id` in
--	"HP IPAQ H3100" | "HP IPAQ H3800" )
--		ARGS="-rotate 90" ;;
--	"HP IPAQ H3600" | "HP IPAQ H3700" | "HP IPAQ H3900" | *COLLIE | *POODLE)
--		ARGS="-rotate 270" ;;
--	# H2200: works without rotation
--esac
--
--# the things we do for autoconf
--prefix=@prefix@
--exec_prefix=@exec_prefix@
--exec @libexecdir@/xtscal.bin $ARGS $*
-Index: xtscal-0.6.3/main.c
-===================================================================
---- xtscal-0.6.3.orig/main.c	2007-07-01 01:12:52.000000000 +0100
-+++ xtscal-0.6.3/main.c	2007-07-01 01:12:55.000000000 +0100
-@@ -22,12 +22,10 @@
- #include <X11/Xlib.h>
- 
- #include <X11/extensions/Xrender.h>
--#include <X11/extensions/Xrandr.h>
- #include <X11/Xft/Xft.h>
- #include <X11/extensions/xcalibrate.h>
- #include <X11/keysym.h>
- 
--#include "h3600_ts.h"
- #include "calibrate.h"
- 
- Display *dpy;
-@@ -45,15 +43,11 @@ XftColor xftcol;
- XftDraw *xftdraw;
- XftFont *xftfont;
- int screen_x, screen_y;
--int ts_fd;
- int samples;
- Pixmap bg_pixmap;
- int flag_debug;
--int rotation = 0;
- int error_base, event_base;
- 
--int using_xcalibrate;
--
- int moving;
- 
- #define CROSSHAIR_SIZE	25
-@@ -63,7 +57,6 @@ int moving;
- #define ENOUGH 5
- #define MAX_SAMPLES 40
- 
--#define RAW_DEVICE "/dev/h3600_tsraw"
- #define FONTNAME "sans-10"
- 
- struct point 
-@@ -287,12 +280,8 @@ sort_by_y (const void* a, const void *b)
- void
- set_calibration (calibration *cal)
- {
--  TS_CAL tc;
--  int xtrans, ytrans, xscale, yscale, xyscale, yxscale;
-   calibration ocal = *cal;
- 
--  if (using_xcalibrate)
--    {
-       FILE *fp;
-       if (flag_debug)
- 	printf ("constants are: %d %d %d %d %d %d %d\n", cal->a[1], cal->a[2], cal->a[0], cal->a[4], cal->a[5], cal->a[3], cal->a[6]);
-@@ -304,29 +293,6 @@ set_calibration (calibration *cal)
- 	}
-       fprintf (fp, "%d %d %d %d %d %d %d\n", cal->a[1], cal->a[2], cal->a[0], cal->a[4], cal->a[5], cal->a[3], cal->a[6]);
-       fclose (fp); 
--      return;
--    }
--
--  xtrans = cal->a[0] / cal->a[6];
--  ytrans = cal->a[3] / cal->a[6];
--  xscale = cal->a[1] * 256 / cal->a[6];
--  yscale = cal->a[5] * 256 / cal->a[6];
--  xyscale = cal->a[2] * 256 / cal->a[6];
--  yxscale = cal->a[4] * 256 / cal->a[6];
--  
--  tc.xtrans = xtrans;
--  tc.ytrans = ytrans;
--  tc.xscale = xscale;
--  tc.yscale = yscale;
--  tc.xyswap = 0;
--
--  printf ("%d %d %d %d %d\n", tc.xscale, tc.xtrans, tc.yscale, tc.ytrans, tc.xyswap);
--
--  if (ioctl (ts_fd, TS_SET_CAL, (void *)&tc) != 0)
--    {
--      perror ("TS_SET_CAL");
--      exit (1);
--    }
- }
- 
- void
-@@ -398,80 +364,13 @@ handle_ts_event (int x, int y, int press
- }
- 
- void
--read_ts (void)
--{
--  TS_EVENT ts_ev;
--  int r;
--
--  r = read (ts_fd, &ts_ev, sizeof (ts_ev));
--  if (r == sizeof (ts_ev))
--    handle_ts_event (ts_ev.x, ts_ev.y, ts_ev.pressure);
--}
--
--void
--do_cal (char **args)
--{
--  TS_CAL tc;
--
--  tc.xscale = atoi (args[0]);
--  tc.xtrans = atoi (args[1]);
--  tc.yscale = atoi (args[2]);
--  tc.ytrans = atoi (args[3]);
--  tc.xyswap = atoi (args[4]);
--
--  if (flag_debug)
--    fprintf (stderr, "setting: %d %d %d %d %d\n", 
--	     tc.xtrans, tc.ytrans, tc.xscale, tc.yscale, tc.xyswap);
--    
--  if (ioctl (ts_fd, TS_SET_CAL, (void *)&tc) != 0)
--    {
--      perror ("TS_SET_CAL");
--      exit (1);
--    }
--  
--  exit (0);
--}
--
--void
--show_cal (void)
--{
--  TS_CAL tc;
--
--  if (ioctl (ts_fd, TS_GET_CAL, (void *)&tc) != 0)
--    {
--      perror ("TS_GET_CAL");
--      exit (1);
--    }
--
--  printf ("%d %d %d %d %d\n", tc.xscale, tc.xtrans, tc.yscale, tc.ytrans, tc.xyswap);
--}
--
--void
- usage (const char *name)
- {
--  fprintf (stderr, "usage: %s -view\n", name);
--  fprintf (stderr, "       %s [-rotate <0 | 90 | 180 | 270>]\n", name);
--  fprintf (stderr, "       %s -cal <xs> <xt> <ys> <yt> <xyswap>\n", name);
--
-+  fprintf (stderr, "usage: %s [-debug]\n", name);
-   exit (1);
- }
- 
- int
--xrr_supported (void)
--{
--  int xrr_event_base, xrr_error_base;
--  int xrr_major, xrr_minor;
--
--  if (XRRQueryExtension (dpy, &xrr_event_base, &xrr_error_base) == False
--      || XRRQueryVersion (dpy, &xrr_major, &xrr_minor) == 0
--      || xrr_major != 1
--      || xrr_minor < 1)
--    return 0;
--
--  return 1;
--}
--
--int
- main (int argc, char *argv[])
- {
-   XSetWindowAttributes attributes;
-@@ -480,31 +379,11 @@ main (int argc, char *argv[])
-   int max_fd;
-   GC bg_gc;
-   int i;
--  int have_xrandr;
- 
-   for (i = 1; i < argc; i++)
-     {
--      if (!strcmp (argv[i], "-view"))
--	{
--	  show_cal ();
--	  exit (0);
--	}
--      else if (!strcmp (argv[i], "-debug"))
-+      if (!strcmp (argv[i], "-debug"))
- 	flag_debug = 1;
--      else if (!strcmp (argv[i], "-cal"))
--	{
--	  if (argc > (i + 5))
--	    do_cal (argv + i + 1);
--	  else
--	    usage (argv[0]);
--	}
--      else if (!strcmp (argv[i], "-rotate"))
--	{
--	  if (argc > (i + 1))
--	    rotation = atoi (argv[++i]);
--	  else
--	    usage (argv[0]);
--	}
-       else
- 	usage (argv[0]);
-     }
-@@ -531,48 +410,11 @@ main (int argc, char *argv[])
- 	  fprintf (stderr, "failed to set raw mode: error %d\n", r);
- 	  exit (1);
- 	}
--
--      using_xcalibrate = 1;
--    }
--
--  have_xrandr = xrr_supported ();
--  if (have_xrandr)
--    {
--      XRRScreenConfiguration *rr_screen;
--      Rotation current_rotation;
--
--      if (flag_debug)
--	fprintf (stderr, "XRANDR is supported\n");
--
--      rr_screen = XRRGetScreenInfo (dpy, RootWindow (dpy, screen));
--
--      XRRRotations (dpy, screen, &current_rotation);
--
--      XRRFreeScreenConfigInfo (rr_screen);
--
--      if (flag_debug)
--	fprintf (stderr, "Current RANDR rotation is %d\n", current_rotation);
--
--      switch (current_rotation)
--	{
--	case RR_Rotate_270:
--	  rotation += 90;
--	case RR_Rotate_180:
--	  rotation += 90;
--	case RR_Rotate_90:
--	  rotation += 90;
--	  rotation %= 360;
--	case RR_Rotate_0:
--	  break;
--	default:
--	  fprintf (stderr, "Unknown RANDR rotation: %d\n", current_rotation);
--	  break;
--	}
-     }
-   else
-     {
--      if (flag_debug)
--	fprintf (stderr, "XRANDR not supported\n");
-+      perror ("XCALIBRATE extension missing");
-+      exit (1);
-     }
- 
-   attributes.override_redirect = flag_debug ? False : True;
-@@ -666,45 +508,17 @@ main (int argc, char *argv[])
- 
-   for (i = 0; i < NR_POINTS; i++)
-     {
--      switch (rotation)
--	{
--	case 0:
--	  cal.xfb[i] = cal.xscr[i];
--	  cal.yfb[i] = cal.yscr[i];
--	  break;
--	case 90:
--	  cal.xfb[i] = cal.yscr[i];
--	  cal.yfb[i] = screen_x - cal.xscr[i];
--	  break;
--	case 180:
--	  cal.xfb[i] = screen_x - cal.xscr[i];
--	  cal.yfb[i] = screen_y - cal.yscr[i];
--	  break;
--	case 270:
--	  cal.xfb[i] = screen_y - cal.yscr[i];
--	  cal.yfb[i] = cal.xscr[i];
--	  break;
--	}
-+      cal.xfb[i] = cal.xscr[i];
-+      cal.yfb[i] = cal.yscr[i];
-+      XCalibrateScreenToCoord (dpy, &cal.xfb[i], &cal.yfb[i]);
- 
-       if (flag_debug)
--	printf ("rotation %d: (%d,%d) -> (%d,%d)\n", rotation, 
-+	printf ("rotation conversion: (%d,%d) -> (%d,%d)\n",
- 		cal.xscr[i], cal.yscr[i], cal.xfb[i], cal.yfb[i]);
-     }
- 
-   next_event ();
- 
--  if (!using_xcalibrate)
--    {
--      ts_fd = open (RAW_DEVICE, O_RDONLY);
--      if (ts_fd < 0)
--	{
--	  perror (RAW_DEVICE);
--	  exit (1);
--	}
--    }
--
--  max_fd = (xfd > ts_fd) ? xfd : ts_fd;
--
-   for (;;)
-     {
-       fd_set fds;
-@@ -713,12 +527,8 @@ main (int argc, char *argv[])
- 
-       FD_ZERO (&fds);
-       FD_SET (xfd, &fds);
--      if (ts_fd != -1)
--	FD_SET (ts_fd, &fds);
- 
--      select (max_fd + 1, &fds, NULL, NULL, NULL);
--      
--      if (ts_fd != -1 && FD_ISSET (ts_fd, &fds))
--	read_ts ();
-+      select (xfd + 1, &fds, NULL, NULL, NULL);
-     }
- }
-+
-Index: xtscal-0.6.3/configure.ac
-===================================================================
---- xtscal-0.6.3.orig/configure.ac	2004-09-10 20:11:12.000000000 +0100
-+++ xtscal-0.6.3/configure.ac	2007-07-01 01:12:55.000000000 +0100
-@@ -9,8 +9,7 @@ AM_INIT_AUTOMAKE([foreign dist-bzip2])
- # Checks for programs.
- AC_PROG_CC
- 
--PKG_CHECK_MODULES(XTSCAL, x11 xft xext xrandr xcalibrate)
-+PKG_CHECK_MODULES(XTSCAL, x11 xft xext xcalibrate)
- 
- AC_CONFIG_FILES([Makefile])
--AC_CONFIG_FILES([xtscal])
- AC_OUTPUT
-Index: xtscal-0.6.3/gpe-dist.am
-===================================================================
---- xtscal-0.6.3.orig/gpe-dist.am	2004-06-02 23:07:13.000000000 +0100
-+++ /dev/null	1970-01-01 00:00:00.000000000 +0000
-@@ -1,12 +0,0 @@
--CVSTAG := $(shell echo $(PACKAGE)-$(VERSION) | tr [a-z.] [A-Z_])
--
--dist-upload: dist
--	scp $(PACKAGE)-$(VERSION).tar.bz2 $(USER)@handhelds.org:/home/ftp/pub/projects/gpe/source/
--
--tag:
--	cvs tag $(CVSTAG)
--
--retag:
--	cvs tag -F $(CVSTAG)
--
--source: tag dist-upload
-Index: xtscal-0.6.3/h3600_ts.h
-===================================================================
---- xtscal-0.6.3.orig/h3600_ts.h	2003-07-05 17:27:10.000000000 +0100
-+++ /dev/null	1970-01-01 00:00:00.000000000 +0000
-@@ -1,216 +0,0 @@
--/*
--*
--* Driver for the H3600 Touch Screen and other Atmel controlled devices.
--*
--* Copyright 2000 Compaq Computer Corporation.
--*
--* Use consistent with the GNU GPL is permitted,
--* provided that this copyright notice is
--* preserved in its entirety in all copies and derived works.
--*
--* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
--* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
--* FITNESS FOR ANY PARTICULAR PURPOSE.
--*
--* Author: Charles Flynn.
--*
--*/
--
--
--#ifndef __H3600_TS_H__
--#define __H3600_TS_H__
--
--#include <linux/ioctl.h>
--
--enum h3600_ts_minor_devices {
--	TS_MINOR    = 0,
--	TSRAW_MINOR = 1,
--	KEY_MINOR   = 2
--};
--
--typedef struct h3600_ts_calibration {
--        int xscale;
--        int xtrans;
--        int yscale;
--        int ytrans;
--        int xyswap;
--} TS_CAL;
--
--typedef struct h3600_ts_event {
--        unsigned short pressure;
--        unsigned short x;
--        unsigned short y;
--        unsigned short pad;
--} TS_EVENT;
--
--/* Deprecated - do not use */
--typedef struct h3600_ts_return {
--        unsigned short pressure;
--        unsigned short x;
--        unsigned short y;
--        unsigned short pad;
--} TS_RET;
--
--enum power_button_mode {
--   PBM_SUSPEND           = 0,
--   PBM_GENERATE_KEYPRESS = 1
--};
--
--
--/* ++++++++++++++ +++++++++++++++++++++++++++++++++++++ */
--
--typedef struct therm_dev {
--	short data;
--} THERM_DEV;
--
--#define H3600_BATT_CHEM_ALKALINE        0x01
--#define H3600_BATT_CHEM_NICD            0x02
--#define H3600_BATT_CHEM_NIMH            0x03
--#define H3600_BATT_CHEM_LION            0x04
--#define H3600_BATT_CHEM_LIPOLY          0x05
--#define H3600_BATT_CHEM_NOT_INSTALLED   0x06
--#define H3600_BATT_CHEM_UNKNOWN         0xff
--
--/* These should match the apm_bios.h definitions */
--#define H3600_AC_STATUS_AC_OFFLINE	0x00
--#define H3600_AC_STATUS_AC_ONLINE	0x01
--#define H3600_AC_STATUS_AC_BACKUP	0x02   /* What does this mean? */
--#define H3600_AC_STATUS_AC_UNKNOWN	0xff
--
--/* These bitfields are rarely "or'd" together */
--#define H3600_BATT_STATUS_HIGH		0x01
--#define H3600_BATT_STATUS_LOW		0x02
--#define H3600_BATT_STATUS_CRITICAL	0x04
--#define H3600_BATT_STATUS_CHARGING	0x08
--#define H3600_BATT_STATUS_CHARGE_MAIN   0x10
--#define H3600_BATT_STATUS_DEAD          0x20   /* Battery will not charge */
--#define H3600_BATT_NOT_INSTALLED        0x20   /* For expansion pack batteries */
--#define H3600_BATT_STATUS_FULL          0x40   /* Battery fully charged (and connected to AC) */
--#define H3600_BATT_STATUS_NOBATT	0x80
--#define H3600_BATT_STATUS_UNKNOWN	0xff
--
--struct battery_data {
--	unsigned char  chemistry;
--	unsigned char  status;
--	unsigned short voltage;    /* Voltage for battery #0; unknown for battery #1 */
--	unsigned short percentage; /* Percentage of full charge */
--	unsigned short life;       /* Life remaining in minutes */
--};
--
--struct h3600_battery {
--        unsigned char       ac_status;
--	unsigned char       battery_count;  /* How many batteries we have */
--	struct battery_data battery[2];
--};
--
--/* -------- EEPROM and SPI Interfaces ---------------*/
--
--#define EEPROM_RD_BUFSIZ 6	/* EEPROM reads are 16 bits */
--#define EEPROM_WR_BUFSIZ 5	/* Allow room for 8bit 'addr' field in buffer*/ 
--#define SPI_RD_BUFSIZ	 16	/* SPI reads are 8 bits */
--#define SPI_WR_BUFSIZ	 7
--
--/* The EEPROM is where internal programs are stored on the Amtel.
--   You probably don't want to read or write these values */
--
--typedef struct h3600_eeprom_read_request {
--	unsigned char addr;    /* 8bit Address Offset 0-255 */
--	unsigned char len;     /* Number of 16bit words to read 0-128  */
--	unsigned short buff[EEPROM_RD_BUFSIZ];
--} EEPROM_READ;
--
--typedef struct h3600_eeprom_write_request {
--	unsigned char len;	/* used only to compute the number of bytes to send */
--	unsigned char addr;    /* 0-128  */
--	unsigned short buff[EEPROM_WR_BUFSIZ];
--} EEPROM_WRITE;
--
--/* The SPI bus connects to EEPROMs located on sleeves plugged into
--   the iPAQ.  You may want to read these values  */
--
--typedef struct h3600_spi_read_request {
--	unsigned short addr;    /* 16bit Address Offset 0-128 */
--	unsigned char len;      /* Number of bytes to read */
--	unsigned char buff[SPI_RD_BUFSIZ];
--} SPI_READ;
--
--#define SPI_READ_STATUS_BYTE  0xffff   /* Use this address to read the status byte */
--
--typedef struct h3600_spi_write_request {
--	unsigned short len;	/* used only to compute the number of bytes to send */
--	unsigned short addr;	/* this 16bit address accesses a single byte */
--	unsigned char  buff[SPI_WR_BUFSIZ];
--} SPI_WRITE;
--
--
--/* -------- end of EEPROM and SPI Interfaces ---------------*/
--
--/* User space structures for IOCTL calls */
--
--typedef struct h3600_ts_version {
--	unsigned char host_version[8];	/* ascii "x.yy" */
--	unsigned char pack_version[8];	/* ascii "x.yy" */
--	unsigned char boot_type;		/* TODO ?? */
--} VER_RET;
--
--typedef struct h3600_ts_led {
--        unsigned char OffOnBlink;       /* 0=off 1=on 2=Blink */
--        unsigned char TotalTime;        /* Units of 5 seconds */
--        unsigned char OnTime;           /* units of 100m/s */
--        unsigned char OffTime;          /* units of 100m/s */
--} LED_IN;
--
--enum flite_mode {
--        FLITE_MODE1 = 1,
--	FLITE_AUTO_MODE   = 1,     /* for reference only */
--	FLITE_MANUAL_MODE = 2,     /* Use this normally? */
--	FLITE_GET_LIGHT_SENSOR = 3 /* Returns light reading in "brightness" field */
--};
--enum flite_pwr {
--        FLITE_PWR_OFF = 0,
--        FLITE_PWR_ON  = 1
--};
--
--typedef struct h3600_ts_flite {
--        unsigned char mode;
--        unsigned char pwr;
--        unsigned char brightness;
--} FLITE_IN;
--
--/*************************** Updated "universal" structures *******************/
--
--/* Sets backlight for both H3100 and H3600 models - technically "frontlight" for H3600 */
--struct h3600_ts_backlight {
--	enum flite_pwr power;          /* 0 = off, 1 = on */
--	unsigned char  brightness;     /* 0 - 255         */
--};
--
--struct h3600_ts_contrast {            /* Only useful on H3100 model */
--	unsigned char contrast;       /* 0 - 255 */
--};
--
--/* IOCTL cmds  user or kernel space */
--
--/* Use 'f' as magic number */
--#define IOC_H3600_TS_MAGIC  'f'
--
--/* TODO: Some of these IOWR values are just plain wrong */
--#define GET_VERSION		_IOR(IOC_H3600_TS_MAGIC,  1, struct h3600_ts_version )
--#define READ_EEPROM		_IOWR(IOC_H3600_TS_MAGIC, 2, struct h3600_eeprom_read_request)
--#define WRITE_EEPROM		_IOWR(IOC_H3600_TS_MAGIC, 3, struct h3600_eeprom_write_request)
--#define GET_THERMAL		_IOR(IOC_H3600_TS_MAGIC,  4, struct therm_dev)
--#define LED_ON			_IOW(IOC_H3600_TS_MAGIC,  5, struct h3600_ts_led)
--#define GET_BATTERY_STATUS	_IOR(IOC_H3600_TS_MAGIC,  6, struct h3600_battery)
--#define FLITE_ON		_IOW(IOC_H3600_TS_MAGIC,  7, struct h3600_ts_flite)
--#define READ_SPI		_IOWR(IOC_H3600_TS_MAGIC, 8, struct h3600_spi_read_request)
--#define WRITE_SPI		_IOWR(IOC_H3600_TS_MAGIC, 9, struct h3600_spi_write_request)
--#define TS_GET_CAL		_IOR(IOC_H3600_TS_MAGIC, 10, struct h3600_ts_calibration)
--#define TS_SET_CAL		_IOW(IOC_H3600_TS_MAGIC, 11, struct h3600_ts_calibration)
--
--/* New IOCTL interfaces - defined to be more user friendly */
--#define TS_GET_BACKLIGHT        _IOR(IOC_H3600_TS_MAGIC, 20, struct h3600_ts_backlight)
--#define TS_SET_BACKLIGHT        _IOW(IOC_H3600_TS_MAGIC, 20, struct h3600_ts_backlight)
--#define TS_GET_CONTRAST         _IOR(IOC_H3600_TS_MAGIC, 21, struct h3600_ts_contrast)
--#define TS_SET_CONTRAST         _IOW(IOC_H3600_TS_MAGIC, 21, struct h3600_ts_contrast)
--
--#endif
-Index: xtscal-0.6.3/Makefile.am
-===================================================================
---- xtscal-0.6.3.orig/Makefile.am	2004-06-02 23:07:13.000000000 +0100
-+++ xtscal-0.6.3/Makefile.am	2007-07-02 12:51:02.000000000 +0100
-@@ -1,11 +1,8 @@
--libexec_PROGRAMS = xtscal.bin
--bin_SCRIPTS = xtscal
-+bin_PROGRAMS = xtscal
- 
--xtscal_bin_SOURCES = main.c calibrate.c calibrate.h h3600_ts.h
-+xtscal_SOURCES = main.c calibrate.c calibrate.h
- 
--xtscal_bin_LDADD = @XTSCAL_LIBS@
-+xtscal_LDADD = @XTSCAL_LIBS@
- 
- INCLUDES = @XTSCAL_CFLAGS@ -DNR_POINTS=5
- 
--include gpe-dist.am
--
diff --git a/meta/recipes-graphics/xtscal/xtscal/dso_linking_change_build_fix.patch b/meta/recipes-graphics/xtscal/xtscal/dso_linking_change_build_fix.patch
deleted file mode 100644
index 3e4533f..0000000
--- a/meta/recipes-graphics/xtscal/xtscal/dso_linking_change_build_fix.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-after gcc linking has changed, all the libraries must be explicitely specified 
-This patch avoids this linking error:
-
-| ccache i586-poky-linux-gcc -march=i586 --sysroot=/disk0/pokybuild/build1/tmp/sysroots/i586-poky-linux  -fexpensive-optimizations -fomit-frame-pointer -frename-registers -O2 -ggdb -feliminate-unused-debug-types  -Wl,-O1 -Wl,--hash-style=gnu -Wl,--as-needed -o xtscal main.o calibrate.o -lX11 -lXft -lXext -lXcalibrate^M
-| /disk0/pokybuild/build1/tmp/sysroots/x86_64-linux/usr/libexec/i586-poky-linux/gcc/i586-poky-linux/4.5.1/ld: ^?: invalid DSO for symbol `XRenderChangePicture' definition^M
-| /disk0/pokybuild/build1/tmp/sysroots/i586-poky-linux/usr/lib/libXrender.so.1: could not read symbols: Bad value^M
-| collect2: ld returned 1 exit status^M
-| make: *** [xtscal] Error 1
-
-Nitin A Kamble <nitin.a.kamble@intel.com>
-Date: 2011/01/11
-
-Upstream-Status: Pending
-
-Index: xtscal-0.6.3/configure.ac
-===================================================================
---- xtscal-0.6.3.orig/configure.ac
-+++ xtscal-0.6.3/configure.ac
-@@ -9,7 +9,7 @@ AM_INIT_AUTOMAKE([foreign dist-bzip2])
- # Checks for programs.
- AC_PROG_CC
- 
--PKG_CHECK_MODULES(XTSCAL, x11 xft xext xcalibrate)
-+PKG_CHECK_MODULES(XTSCAL, x11 xft xext xcalibrate xrender)
- 
- AC_CONFIG_FILES([Makefile])
- AC_OUTPUT
diff --git a/meta/recipes-graphics/xtscal/xtscal_0.6.3.bb b/meta/recipes-graphics/xtscal/xtscal_0.6.3.bb
deleted file mode 100644
index 4bfddf0..0000000
--- a/meta/recipes-graphics/xtscal/xtscal_0.6.3.bb
+++ /dev/null
@@ -1,33 +0,0 @@
-SUMMARY = "Touchscreen calibration utility"
-
-DESCRIPTION = "Basic touchscreen calibration utility"
-
-HOMEPAGE = "http://gpe.linuxtogo.org"
-BUGTRACKER = "http://bugs.linuxtogo.org"
-LICENSE = "GPLv2 & GPLv2+"
-LIC_FILES_CHKSUM = "file://COPYING;md5=94d55d512a9ba36caa9b7df079bae19f \
-                    file://main.c;endline=10;md5=8721bcb08ae9f24e5fe4c82941873c87"
-
-SECTION = "x11/base"
-
-DEPENDS = "virtual/libx11 libxft libxcalibrate"
-
-PR = "r13"
-
-SRC_URI = "${GPE_MIRROR}/xtscal-${PV}.tar.bz2 \
-           file://change-cross.patch \
-           file://cleanup.patch \
-           file://dso_linking_change_build_fix.patch \
-           file://30xTs_Calibrate.sh"
-
-SRC_URI[md5sum] = "9bcab80b474d5454477d1ca166a68c34"
-SRC_URI[sha256sum] = "27b9dc2203de9b1706ca39fa6ca80ecab8807909ec901c4a345b8e41178800a1"
-
-inherit autotools pkgconfig distro_features_check
-# depends on virtual/libx11
-REQUIRED_DISTRO_FEATURES = "x11"
-
-do_install_append() {
-    install -d ${D}${sysconfdir}/X11/Xsession.d/
-    install -m 0755 ${WORKDIR}/30xTs_Calibrate.sh ${D}${sysconfdir}/X11/Xsession.d/
-}
-- 
2.4.0



^ permalink raw reply related	[flat|nested] 8+ messages in thread
end of thread, other threads:[~2016-06-16 11:11 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-06-15 13:12 [PATCH 1/4] xtscal: remove recipe Maxin B. John
2016-06-15 13:12 ` [PATCH 2/4] x11-common: replace xtscal with xinput-calibrator Maxin B. John
2016-06-15 13:12 ` [PATCH 3/4] distro_alias.inc: remove xtscal Maxin B. John
2016-06-15 13:13 ` [PATCH 4/4] pointercal-xinput: add a dummy calibration file for qemu Maxin B. John
2016-06-15 16:58   ` Richard Purdie
2016-06-16  8:05     ` Maxin B. John
2016-06-16  8:43       ` Richard Purdie
2016-06-16 11:11         ` Maxin B. John

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox