* [PATCH 1/8] populate_sdk_ext.bbclass: fix for multilib
2018-03-13 3:24 [PATCH 0/8] [rebase and resend] fixes for multilib Robert Yang
@ 2018-03-13 3:24 ` Robert Yang
2018-03-13 3:24 ` [PATCH 2/8] staging.bbclass: staging_populate_sysroot_dir(): " Robert Yang
` (6 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Robert Yang @ 2018-03-13 3:24 UTC (permalink / raw)
To: openembedded-core
Fixed:
MACHINE = "qemux86-64"
require conf/multilib.conf
MULTILIBS = "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 = "x86"
$ bitbake <image> -cpopulate_sdk_ext
$ bitbake <image> -ctestsdkext
[snip]
Standard Output: /bin/sh: 1: i686-wrsmllib32-linux-gcc: not found
[snip]
It was failed because no lib32 toolchain or lib installed.
This patch fixes:
* Set SDK_TARGETS correctly
* Return multilib depends in get_ext_sdk_depends()
* Write information to all environment-setup-* scripts.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
---
meta/classes/populate_sdk_ext.bbclass | 72 +++++++++++++++++++++++------------
1 file changed, 47 insertions(+), 25 deletions(-)
diff --git a/meta/classes/populate_sdk_ext.bbclass b/meta/classes/populate_sdk_ext.bbclass
index 6553754..057c495 100644
--- a/meta/classes/populate_sdk_ext.bbclass
+++ b/meta/classes/populate_sdk_ext.bbclass
@@ -38,7 +38,7 @@ SDK_LOCAL_CONF_BLACKLIST ?= "CONF_VERSION \
SDK_INHERIT_BLACKLIST ?= "buildhistory icecc"
SDK_UPDATE_URL ?= ""
-SDK_TARGETS ?= "${PN}"
+SDK_TARGETS ?= "${@multilib_pkg_extend(d, d.getVar('BPN', True))}"
def get_sdk_install_targets(d, images_only=False):
sdk_install_targets = ''
@@ -55,9 +55,11 @@ def get_sdk_install_targets(d, images_only=False):
if not images_only:
if d.getVar('SDK_INCLUDE_PKGDATA') == '1':
- sdk_install_targets += ' meta-world-pkgdata:do_allpackagedata'
+ for pn in multilib_pkg_extend(d, 'meta-world-pkgdata').split():
+ sdk_install_targets += ' %s:do_allpackagedata' % pn
if d.getVar('SDK_INCLUDE_TOOLCHAIN') == '1':
- sdk_install_targets += ' meta-extsdk-toolchain:do_populate_sysroot'
+ for pn in multilib_pkg_extend(d, 'meta-extsdk-toolchain').split():
+ sdk_install_targets += ' %s:do_populate_sysroot' % pn
return sdk_install_targets
@@ -601,40 +603,55 @@ SDK_PRE_INSTALL_COMMAND_task-populate-sdk-ext = "${sdk_ext_preinst}"
sdk_ext_postinst() {
printf "\nExtracting buildtools...\n"
cd $target_sdk_dir
- env_setup_script="$target_sdk_dir/environment-setup-${REAL_MULTIMACH_TARGET_SYS}"
- printf "buildtools\ny" | ./${SDK_BUILDTOOLS_INSTALLER} > buildtools.log || { printf 'ERROR: buildtools installation failed:\n' ; cat buildtools.log ; echo "printf 'ERROR: this SDK was not fully installed and needs reinstalling\n'" >> $env_setup_script ; exit 1 ; }
+ env_setup_scripts="`ls $target_sdk_dir/environment-setup-*`"
+ ./${SDK_BUILDTOOLS_INSTALLER} -d buildtools -y > buildtools.log
+ if [ $? -ne 0 ]; then
+ echo 'ERROR: buildtools installation failed:'
+ cat buildtools.log
+ for e in $env_setup_scripts; do
+ echo "echo 'ERROR: this SDK was not fully installed and needs reinstalling'" >> $e
+ done
+ exit 1
+ fi
# Delete the buildtools tar file since it won't be used again
rm -f ./${SDK_BUILDTOOLS_INSTALLER}
# We don't need the log either since it succeeded
rm -f buildtools.log
- # Make sure when the user sets up the environment, they also get
- # the buildtools-tarball tools in their path.
- echo ". $target_sdk_dir/buildtools/environment-setup*" >> $env_setup_script
-
- # Allow bitbake environment setup to be ran as part of this sdk.
- echo "export OE_SKIP_SDK_CHECK=1" >> $env_setup_script
- # Work around runqemu not knowing how to get this information within the eSDK
- echo "export DEPLOY_DIR_IMAGE=$target_sdk_dir/tmp/${@os.path.relpath(d.getVar('DEPLOY_DIR_IMAGE'), d.getVar('TMPDIR'))}" >> $env_setup_script
+ for e in $env_setup_scripts; do
+ # Make sure when the user sets up the environment, they also get
+ # the buildtools-tarball tools in their path.
+ echo ". $target_sdk_dir/buildtools/environment-setup*" >> $e
- # A bit of another hack, but we need this in the path only for devtool
- # so put it at the end of $PATH.
- echo "export PATH=$target_sdk_dir/sysroots/${SDK_SYS}${bindir_nativesdk}:\$PATH" >> $env_setup_script
+ # Allow bitbake environment setup to be ran as part of this sdk.
+ echo "export OE_SKIP_SDK_CHECK=1" >> $e
- echo "printf 'SDK environment now set up; additionally you may now run devtool to perform development tasks.\nRun devtool --help for further details.\n'" >> $env_setup_script
+ # Work around runqemu not knowing how to get this information within the eSDK
+ echo "export DEPLOY_DIR_IMAGE=$target_sdk_dir/tmp/${@os.path.relpath(d.getVar('DEPLOY_DIR_IMAGE'), d.getVar('TMPDIR'))}" >> $e
- # Warn if trying to use external bitbake and the ext SDK together
- echo "(which bitbake > /dev/null 2>&1 && echo 'WARNING: attempting to use the extensible SDK in an environment set up to run bitbake - this may lead to unexpected results. Please source this script in a new shell session instead.') || true" >> $env_setup_script
+ # A bit of another hack, but we need this in the path only for devtool
+ # so put it at the end of $PATH.
+ echo "export PATH=$target_sdk_dir/sysroots/${SDK_SYS}${bindir_nativesdk}:\$PATH" >> $e
+ echo "printf 'SDK environment now set up; additionally you may now run devtool to perform development tasks.\nRun devtool --help for further details.\n'" >> $e
+ # Warn if trying to use external bitbake and the ext SDK together
+ echo "(which bitbake > /dev/null 2>&1 && echo 'WARNING: attempting to use the extensible SDK in an environment set up to run bitbake - this may lead to unexpected results. Please source this script in a new shell session instead.') || true" >> $e
+ done
if [ "$prepare_buildsystem" != "no" ]; then
- printf "Preparing build system...\n"
+ echo "Preparing build system..."
# dash which is /bin/sh on Ubuntu will not preserve the
# current working directory when first ran, nor will it set $1 when
# sourcing a script. That is why this has to look so ugly.
LOGFILE="$target_sdk_dir/preparing_build_system.log"
- sh -c ". buildtools/environment-setup* > $LOGFILE && cd $target_sdk_dir/`dirname ${oe_init_build_env_path}` && set $target_sdk_dir && . $target_sdk_dir/${oe_init_build_env_path} $target_sdk_dir >> $LOGFILE && python $target_sdk_dir/ext-sdk-prepare.py $LOGFILE '${SDK_INSTALL_TARGETS}'" || { echo "printf 'ERROR: this SDK was not fully installed and needs reinstalling\n'" >> $env_setup_script ; exit 1 ; }
- rm $target_sdk_dir/ext-sdk-prepare.py
+ sh -c ". buildtools/environment-setup* > $LOGFILE && cd $target_sdk_dir/`dirname ${oe_init_build_env_path}` && set $target_sdk_dir && . $target_sdk_dir/${oe_init_build_env_path} $target_sdk_dir >> $LOGFILE && python $target_sdk_dir/ext-sdk-prepare.py $LOGFILE '${SDK_INSTALL_TARGETS}'"
+ if [ $? -ne 0 ]; then
+ for e in $env_setup_scripts; do
+ echo "echo 'ERROR: this SDK was not fully installed and needs reinstalling'" >> $e
+ done
+ exit 1
+ fi
+ rm -f $target_sdk_dir/ext-sdk-prepare.py
fi
echo done
}
@@ -663,12 +680,17 @@ fakeroot python do_populate_sdk_ext() {
def get_ext_sdk_depends(d):
# Note: the deps varflag is a list not a string, so we need to specify expand=False
deps = d.getVarFlag('do_image_complete', 'deps', False)
- pn = d.getVar('PN')
- deplist = ['%s:%s' % (pn, dep) for dep in deps]
+ deplist = []
+ for pn in multilib_pkg_extend(d, d.getVar('BPN')).split():
+ deplist += ['%s:%s' % (pn, dep) for dep in deps]
tasklist = bb.build.tasksbetween('do_image_complete', 'do_build', d)
tasklist.append('do_rootfs')
for task in tasklist:
deplist.extend((d.getVarFlag(task, 'depends') or '').split())
+
+ for pn in multilib_pkg_extend(d, 'meta-extsdk-toolchain').split():
+ deplist += ['%s:do_populate_sysroot' % pn]
+
return ' '.join(deplist)
python do_sdk_depends() {
@@ -682,7 +704,7 @@ python do_sdk_depends() {
addtask sdk_depends
do_sdk_depends[dirs] = "${WORKDIR}"
-do_sdk_depends[depends] = "${@get_ext_sdk_depends(d)} meta-extsdk-toolchain:do_populate_sysroot"
+do_sdk_depends[depends] = "${@get_ext_sdk_depends(d)}"
do_sdk_depends[recrdeptask] = "${@d.getVarFlag('do_populate_sdk', 'recrdeptask', False)}"
do_sdk_depends[recrdeptask] += "do_populate_lic do_package_qa do_populate_sysroot do_deploy ${SDK_RECRDEP_TASKS}"
do_sdk_depends[rdepends] = "${@get_sdk_ext_rdepends(d)}"
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 2/8] staging.bbclass: staging_populate_sysroot_dir(): fix for multilib
2018-03-13 3:24 [PATCH 0/8] [rebase and resend] fixes for multilib Robert Yang
2018-03-13 3:24 ` [PATCH 1/8] populate_sdk_ext.bbclass: fix " Robert Yang
@ 2018-03-13 3:24 ` Robert Yang
2018-03-13 3:24 ` [PATCH 3/8] staging.bbclass: print searched manifest when not found Robert Yang
` (5 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Robert Yang @ 2018-03-13 3:24 UTC (permalink / raw)
To: openembedded-core
Fixed:
MACHINE = "qemux86-64"
require conf/multilib.conf
MULTILIBS = "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 = "x86"
$ bitbake core-image-sato lib32-core-image-sato
$ bitbake build-sysroots
All lib32 manifests which had been built should be installed, but only a few
such as qemux86_64-lib32-base-files were installed (it was installed because
MACHINE_ARCH was still qemux86-64 when multilib), but others such as
x86-lib32-zlib were not installed, this was incorrect. For multilib builds,
fix-up overrides to prepend :virtclass-multilib- and then again append
additional multilib arches from the PACKAGE_EXTRA_ARCHS list if needed can fix
the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
---
meta/classes/staging.bbclass | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/meta/classes/staging.bbclass b/meta/classes/staging.bbclass
index 3fcbc9f..c45ada4 100644
--- a/meta/classes/staging.bbclass
+++ b/meta/classes/staging.bbclass
@@ -190,8 +190,23 @@ def staging_populate_sysroot_dir(targetsysroot, nativesysroot, native, d):
pkgarchs = ['${MACHINE_ARCH}']
pkgarchs = pkgarchs + list(reversed(d.getVar("PACKAGE_EXTRA_ARCHS").split()))
pkgarchs.append('allarch')
+
+ # Handle multilib archs
+ variants = d.getVar("MULTILIB_VARIANTS", True) or ""
+ for variant in variants.split():
+ localdata = bb.data.createCopy(d)
+ overrides = localdata.getVar("OVERRIDES", False) + ":virtclass-multilib-" + variant
+ localdata.setVar("OVERRIDES", overrides)
+ bb.data.update_data(localdata)
+ pkgarchs_ml = localdata.getVar('PACKAGE_EXTRA_ARCHS').split()
+ for arch in pkgarchs_ml:
+ if arch not in pkgarchs:
+ pkgarchs.append(arch)
+
targetdir = targetsysroot
+ bb.debug(1, 'pkgarchs: %s' % pkgarchs)
+
bb.utils.mkdirhier(targetdir)
for pkgarch in pkgarchs:
for manifest in glob.glob(d.expand("${SSTATE_MANIFESTS}/manifest-%s-*.populate_sysroot" % pkgarch)):
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 3/8] staging.bbclass: print searched manifest when not found
2018-03-13 3:24 [PATCH 0/8] [rebase and resend] fixes for multilib Robert Yang
2018-03-13 3:24 ` [PATCH 1/8] populate_sdk_ext.bbclass: fix " Robert Yang
2018-03-13 3:24 ` [PATCH 2/8] staging.bbclass: staging_populate_sysroot_dir(): " Robert Yang
@ 2018-03-13 3:24 ` Robert Yang
2018-03-13 3:24 ` [PATCH 4/8] package_manager.py: reverse archs correctly Robert Yang
` (4 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Robert Yang @ 2018-03-13 3:24 UTC (permalink / raw)
To: openembedded-core
The old warning was:
WARNING: lib32-wrlinux-image-glibc-small-1.0-r1 do_prepare_recipe_sysroot: Manifest /path/to/tmp/sstate-control/manifest-allarch-lib32-qemuwrapper-cross.populate_sysroot not found?
The message wasn't clear enough, it searched a few manifests, but only
reported the last one, which confused user.
Now the warning is:
WARNING: lib32-wrlinux-image-glibc-small-1.0-r1 do_rootfs: Manifest for lib32-qemuwrapper-cross not found, searched manifests:
/path/to/tmp/sstate-control/manifest-qemux86_64-lib32-qemuwrapper-cross.populate_sysroot
/path/to/tmp/sstate-control/manifest-core2-64-lib32-qemuwrapper-cross.populate_sysroot
/path/to/tmp/sstate-control/manifest-x86_64-lib32-qemuwrapper-cross.populate_sysroot
/path/to/tmp/sstate-control/manifest-allarch-lib32-qemuwrapper-cross.populate_sysroot
Whick makes debug easier.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
---
meta/lib/oe/sstatesig.py | 3 +++
1 file changed, 3 insertions(+)
diff --git a/meta/lib/oe/sstatesig.py b/meta/lib/oe/sstatesig.py
index b82e0f4..0c90ffe 100644
--- a/meta/lib/oe/sstatesig.py
+++ b/meta/lib/oe/sstatesig.py
@@ -394,11 +394,14 @@ def find_sstate_manifest(taskdata, taskdata2, taskname, d, multilibcache):
pkgarchs.append('allarch')
pkgarchs.append('${SDK_ARCH}_${SDK_ARCH}-${SDKPKGSUFFIX}')
+ searched_manifest = []
for pkgarch in pkgarchs:
manifest = d2.expand("${SSTATE_MANIFESTS}/manifest-%s-%s.%s" % (pkgarch, taskdata, taskname))
if os.path.exists(manifest):
return manifest, d2
+ searched_manifest.append(manifest)
bb.warn("Manifest %s not found in %s (variant '%s')?" % (manifest, d2.expand(" ".join(pkgarchs)), variant))
+ bb.warn("Searched manifests:\n%s" % '\n'.join(searched_manifest))
return None, d2
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 4/8] package_manager.py: reverse archs correctly
2018-03-13 3:24 [PATCH 0/8] [rebase and resend] fixes for multilib Robert Yang
` (2 preceding siblings ...)
2018-03-13 3:24 ` [PATCH 3/8] staging.bbclass: print searched manifest when not found Robert Yang
@ 2018-03-13 3:24 ` Robert Yang
2018-03-13 3:24 ` [PATCH 5/8] multilib.bbclass: extend allarch recipes Robert Yang
` (3 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Robert Yang @ 2018-03-13 3:24 UTC (permalink / raw)
To: openembedded-core
It had reversed all the archs, which mixed multilib and common archs, e.g.:
"all any noarch x86_64 core2-64 qemux86_64 x86 i586 core2-32"
After reversed:
"core2-32 i586 x86 qemux86_64 core2-64 x86_64 noarch any all"
The core2-32 has a higher priority than core2-64 after reversed which is
incorrect. Don't mix with mulitlib when reverse can fix the problem, and let
multilib archs have a higher priority for multilib image.
Fixed:
MACHINE = "qemux86-64"
require conf/multilib.conf
MULTILIBS = "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 = "core2-32"
IMAGE_INSTALL_append = " ca-certificates"
$ bitbake wrlinux-image-glibc-small
Check rootfs.manifest, no core_32 packages is installed, this is
correct, but after we build lib32-bash, it will be incorrect:
$ bitbake lib32-bash
$ bitbake wrlinux-image-glibc-small
Check rootfs.manifest, a few lib32 packages are installed, such as
lib32-bash, this is incorrect. It was because ca-certificates is
allarch, and requires /bin/sh, which is provided by both bash and
lib32-bash, and lib32-bash has a higher priority than bash, so it would
be installed.
[YOCTO #12288]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
---
meta/lib/oe/package_manager.py | 57 ++++++++++++++++++++++++++++++++++++++----
1 file changed, 52 insertions(+), 5 deletions(-)
diff --git a/meta/lib/oe/package_manager.py b/meta/lib/oe/package_manager.py
index c10efb8..d4dc174 100644
--- a/meta/lib/oe/package_manager.py
+++ b/meta/lib/oe/package_manager.py
@@ -572,10 +572,10 @@ class RpmPM(PackageManager):
self.target_rootfs = target_rootfs
self.target_vendor = target_vendor
self.task_name = task_name
- if arch_var == None:
- self.archs = self.d.getVar('ALL_MULTILIB_PACKAGE_ARCHS').replace("-","_")
- else:
- self.archs = self.d.getVar(arch_var).replace("-","_")
+
+ self.archs = self._determine_archs(arch_var)
+ bb.note("The archs used by package manager: %s" % self.archs)
+
if task_name == "host":
self.primary_arch = self.d.getVar('SDK_ARCH')
else:
@@ -593,9 +593,56 @@ class RpmPM(PackageManager):
if not os.path.exists(self.d.expand('${T}/saved')):
bb.utils.mkdirhier(self.d.expand('${T}/saved'))
+ def _determine_archs(self, arch_var):
+ if arch_var:
+ archs = self.d.getVar(arch_var).replace("-","_").split()
+ else:
+ archs = self.d.getVar('ALL_MULTILIB_PACKAGE_ARCHS').replace("-","_").split()
+ # Reverse archs to ensure the -best- match is listed firstly, but need
+ # make sure not mixed with multilib archs, and let multilib archs have
+ # higher a priority for multilib image:
+ # For non-multilib image: (e.g., core-image-minimal)
+ # machine_arch:package_archs:multilib_archs:allarch_archs
+ # For multilib image: (e.g., lib32-core-image-minimal)
+ # machine_arch:multilib_archs:package_archs:allarch_archs
+ package_archs_var = self.d.getVar('PACKAGE_ARCHS').replace("-","_").split()
+ machine_arch_var = [self.d.getVar('MACHINE_ARCH').replace("-","_")]
+ package_archs = []
+ allarch_archs = []
+ ml_archs = []
+ machine_arch = []
+ for arch in archs:
+ if arch in machine_arch_var:
+ bb.note("Found MACHINE_ARCH: %s" % arch)
+ machine_arch.append(arch)
+ elif arch in package_archs_var:
+ bb.note("Found PACKAGE_ARCH: %s" % arch)
+ package_archs.append(arch)
+ elif arch in 'all any noarch'.split():
+ bb.note("Found allarch: %s" % arch)
+ allarch_archs.append(arch)
+ else:
+ bb.note("Found multilib arch: %s" % arch)
+ ml_archs.append(arch)
+ package_archs.reverse()
+ if machine_arch:
+ archs = machine_arch
+ mlprefix = self.d.getVar('MLPREFIX')
+ if ml_archs:
+ ml_archs.reverse()
+ if mlprefix:
+ archs += ml_archs + package_archs
+ else:
+ archs += package_archs + ml_archs
+ else:
+ archs += package_archs
+
+ archs += allarch_archs
+ return ' '.join(archs)
+
def _configure_dnf(self):
# libsolv handles 'noarch' internally, we don't need to specify it explicitly
- archs = [i for i in reversed(self.archs.split()) if i not in ["any", "all", "noarch"]]
+ archs = [i for i in self.archs.split() if i not in ["any", "all", "noarch"]]
# This prevents accidental matching against libsolv's built-in policies
if len(archs) <= 1:
archs = archs + ["bogusarch"]
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 5/8] multilib.bbclass: extend allarch recipes
2018-03-13 3:24 [PATCH 0/8] [rebase and resend] fixes for multilib Robert Yang
` (3 preceding siblings ...)
2018-03-13 3:24 ` [PATCH 4/8] package_manager.py: reverse archs correctly Robert Yang
@ 2018-03-13 3:24 ` Robert Yang
2018-03-13 3:24 ` [PATCH 6/8] toolchain-scripts.bbclass: only install all MULTILIB_VARIANTS for image Robert Yang
` (2 subsequent siblings)
7 siblings, 0 replies; 11+ messages in thread
From: Robert Yang @ 2018-03-13 3:24 UTC (permalink / raw)
To: openembedded-core
This can fix do_rootfs and depends chaos when multilib, for example
ca-certificates is an allarch recipe:
MACHINE = "qemux86-64"
require conf/multilib.conf
MULTILIBS = "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 = "core2-32"
IMAGE_INSTALL_append = " ca-certificates"
$ bitbake ca-certificates
$ rpm -qpR tmp-glibc/deploy/rpm/noarch/ca-certificates-20170717-r0.noarch.rpm
[snip]
openssl
[snip]
It requires openssl, but lib32-openssl doesn't proivide it:
$ rpm -qp --provides tmp-glibc/deploy/rpm/core2_32/lib32-openssl-1.0.2l-r0.core2_32.rpm
lib32-openssl = 1.0.2l-r0
So openssl-1.0.2l-r0.core2_64.rpm would be installed when install
ca-certificates, e.g.:
MACHINE = "qemux86-64"
require conf/multilib.conf
MULTILIBS = "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 = "core2-32"
IMAGE_INSTALL_append = " ca-certificates"
$ bitbake lib32-core-image-minimal
The openssl-1.0.2l-r0.core2_64.rpm and other 64 bit packages are installed,
this is incorrect.
We have two solutions on this:
1) Let lib32-openssl provide openssl, but this would cause more problems when
building since more than one providers for openssl.
Or
2) Extend allarch recipes, there would be ca-certificates-20170717-r0.noarch.rpm
and lib32-ca-certificates-20170717-r0.noarch.rpm, then ca-certificates
requires openssl, and lib32-ca-certificates requires lib32-openssl, the
packages will be installed correctly, this is the best solution that I can
find.
The problem has existed for years for deb and ipk (rpm did work since it didn't
use lib32-BPN in rpm filename before changed to dnf, for example, there was no
lib32-openssl.core2_32.rpm, but openssl.core2_32.rpm), this patch can fix the
problem for rpm, ipk and deb.
[YOCTO #12288]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
---
meta/classes/allarch.bbclass | 3 ---
meta/classes/multilib.bbclass | 4 ----
meta/classes/multilib_global.bbclass | 4 +---
meta/classes/package.bbclass | 9 ---------
4 files changed, 1 insertion(+), 19 deletions(-)
diff --git a/meta/classes/allarch.bbclass b/meta/classes/allarch.bbclass
index 51ba509..b4f694d 100644
--- a/meta/classes/allarch.bbclass
+++ b/meta/classes/allarch.bbclass
@@ -42,9 +42,6 @@ python () {
d.setVar("INHIBIT_PACKAGE_DEBUG_SPLIT", "1")
d.setVar("INHIBIT_PACKAGE_STRIP", "1")
- # These multilib values shouldn't change allarch packages so exclude them
- d.appendVarFlag("emit_pkgdata", "vardepsexclude", " MULTILIB_VARIANTS")
- d.appendVarFlag("write_specfile", "vardepsexclude", " MULTILIBS")
elif bb.data.inherits_class('packagegroup', d) and not bb.data.inherits_class('nativesdk', d):
bb.error("Please ensure recipe %s sets PACKAGE_ARCH before inherit packagegroup" % d.getVar("FILE"))
}
diff --git a/meta/classes/multilib.bbclass b/meta/classes/multilib.bbclass
index fbb6980..b517dde 100644
--- a/meta/classes/multilib.bbclass
+++ b/meta/classes/multilib.bbclass
@@ -46,10 +46,6 @@ python multilib_virtclass_handler () {
if bb.data.inherits_class('nativesdk', e.data) or bb.data.inherits_class('crosssdk', e.data):
raise bb.parse.SkipRecipe("We can't extend nativesdk recipes")
- if bb.data.inherits_class('allarch', e.data) and not bb.data.inherits_class('packagegroup', e.data):
- raise bb.parse.SkipRecipe("Don't extend allarch recipes which are not packagegroups")
-
-
# Expand this since this won't work correctly once we set a multilib into place
e.data.setVar("ALL_MULTILIB_PACKAGE_ARCHS", e.data.getVar("ALL_MULTILIB_PACKAGE_ARCHS"))
diff --git a/meta/classes/multilib_global.bbclass b/meta/classes/multilib_global.bbclass
index d2ec1ad..1bb6242 100644
--- a/meta/classes/multilib_global.bbclass
+++ b/meta/classes/multilib_global.bbclass
@@ -165,9 +165,7 @@ python multilib_virtclass_handler_global () {
return
if bb.data.inherits_class('kernel', e.data) or \
- bb.data.inherits_class('module-base', e.data) or \
- (bb.data.inherits_class('allarch', e.data) and\
- not bb.data.inherits_class('packagegroup', e.data)):
+ bb.data.inherits_class('module-base', e.data):
variants = (e.data.getVar("MULTILIB_VARIANTS") or "").split()
import oe.classextend
diff --git a/meta/classes/package.bbclass b/meta/classes/package.bbclass
index 317c775..0e26b46 100644
--- a/meta/classes/package.bbclass
+++ b/meta/classes/package.bbclass
@@ -475,9 +475,6 @@ def get_package_mapping (pkg, basepkg, d):
key = "PKG_%s" % pkg
if key in data:
- # Have to avoid undoing the write_extra_pkgs(global_variants...)
- if bb.data.inherits_class('allarch', d) and data[key] == basepkg:
- return pkg
return data[key]
return pkg
@@ -1391,9 +1388,6 @@ fi
if bb.data.inherits_class('kernel', d) or bb.data.inherits_class('module-base', d):
write_extra_pkgs(variants, pn, packages, pkgdatadir)
- if (bb.data.inherits_class('allarch', d) and not bb.data.inherits_class('packagegroup', d)):
- write_extra_pkgs(global_variants, pn, packages, pkgdatadir)
-
workdir = d.getVar('WORKDIR')
for pkg in packages.split():
@@ -1479,9 +1473,6 @@ fi
if bb.data.inherits_class('kernel', d) or bb.data.inherits_class('module-base', d):
write_extra_runtime_pkgs(variants, packages, pkgdatadir)
- if bb.data.inherits_class('allarch', d) and not bb.data.inherits_class('packagegroup', d):
- write_extra_runtime_pkgs(global_variants, packages, pkgdatadir)
-
bb.utils.unlockfile(lf)
}
emit_pkgdata[dirs] = "${PKGDESTWORK}/runtime ${PKGDESTWORK}/runtime-reverse ${PKGDESTWORK}/runtime-rprovides"
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 6/8] toolchain-scripts.bbclass: only install all MULTILIB_VARIANTS for image
2018-03-13 3:24 [PATCH 0/8] [rebase and resend] fixes for multilib Robert Yang
` (4 preceding siblings ...)
2018-03-13 3:24 ` [PATCH 5/8] multilib.bbclass: extend allarch recipes Robert Yang
@ 2018-03-13 3:24 ` Robert Yang
2018-03-13 3:24 ` [PATCH 7/8] populate_sdk_ext.bbclass: remove the try...finally Robert Yang
2018-03-13 3:24 ` [PATCH 8/8] staging.bbclass: extend_recipe_sysroot: fix multilib manifest Robert Yang
7 siblings, 0 replies; 11+ messages in thread
From: Robert Yang @ 2018-03-13 3:24 UTC (permalink / raw)
To: openembedded-core
Install all MULTILIB_VARIANTS to sysroot and pack them only makes sense to
image recipe, so limit it to image recipe only, and it can fix:
MACHINE = "qemux86-64"
require conf/multilib.conf
MULTILIBS = "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 = "core2-32"
$ bitbake lib32-meta-ide-support
WARNING: lib32-meta-ide-support-1.0-r3 do_configure: Manifest for ncurses not found, searched manifests:
/workspace2/lyang1/test_mlwarn/tmp-glibc/sstate-control/manifest-qemux86_64-ncurses.populate_sysroot
/workspace2/lyang1/test_mlwarn/tmp-glibc/sstate-control/manifest-core2-32-ncurses.populate_sysroot
/workspace2/lyang1/test_mlwarn/tmp-glibc/sstate-control/manifest-i586-ncurses.populate_sysroot
/workspace2/lyang1/test_mlwarn/tmp-glibc/sstate-control/manifest-x86-ncurses.populate_sysroot
/workspace2/lyang1/test_mlwarn/tmp-glibc/sstate-control/manifest-allarch-ncurses.populate_sysroot
This is because core2-64 is not in lib32-meta-ide-support's
PACKAGE_ARCHS which doesn't like image recipe (lib32-image recipe's
DEFAULTTUNE is not overridded)
[YOCTO #12298]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
---
meta/classes/toolchain-scripts.bbclass | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/meta/classes/toolchain-scripts.bbclass b/meta/classes/toolchain-scripts.bbclass
index eeb320d..52d8f83 100644
--- a/meta/classes/toolchain-scripts.bbclass
+++ b/meta/classes/toolchain-scripts.bbclass
@@ -166,6 +166,12 @@ toolchain_create_sdk_siteconfig[vardepsexclude] = "TOOLCHAIN_CONFIGSITE_SYSROOTC
python __anonymous () {
import oe.classextend
+
+ # Install all MULTILIB_VARIANTS to sysroot and pack them only makes sense to
+ # image recipe.
+ if not bb.data.inherits_class('image', d):
+ return
+
deps = ""
for dep in (d.getVar('TOOLCHAIN_NEED_CONFIGSITE_CACHE') or "").split():
deps += " %s:do_populate_sysroot" % dep
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 7/8] populate_sdk_ext.bbclass: remove the try...finally
2018-03-13 3:24 [PATCH 0/8] [rebase and resend] fixes for multilib Robert Yang
` (5 preceding siblings ...)
2018-03-13 3:24 ` [PATCH 6/8] toolchain-scripts.bbclass: only install all MULTILIB_VARIANTS for image Robert Yang
@ 2018-03-13 3:24 ` Robert Yang
2018-03-13 14:57 ` Richard Purdie
2018-03-13 3:24 ` [PATCH 8/8] staging.bbclass: extend_recipe_sysroot: fix multilib manifest Robert Yang
7 siblings, 1 reply; 11+ messages in thread
From: Robert Yang @ 2018-03-13 3:24 UTC (permalink / raw)
To: openembedded-core
The "sdkbasepath + '/conf/local.conf.bak" doesn't exist when
"oe.copy_buildsystem.check_sstate_task_list()" fails, then os.replace() would
raise FileNotFoundError, which overcomes the real error. Keep the error status
makes debug easier, so remove the try..finally.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
---
meta/classes/populate_sdk_ext.bbclass | 70 +++++++++++++++++------------------
1 file changed, 34 insertions(+), 36 deletions(-)
diff --git a/meta/classes/populate_sdk_ext.bbclass b/meta/classes/populate_sdk_ext.bbclass
index 057c495..43823bf 100644
--- a/meta/classes/populate_sdk_ext.bbclass
+++ b/meta/classes/populate_sdk_ext.bbclass
@@ -142,43 +142,41 @@ def create_filtered_tasklist(d, sdkbasepath, tasklistfile, conf_initpath):
# Create a temporary build directory that we can pass to the env setup script
shutil.copyfile(sdkbasepath + '/conf/local.conf', sdkbasepath + '/conf/local.conf.bak')
+ with open(sdkbasepath + '/conf/local.conf', 'a') as f:
+ # Force the use of sstate from the build system
+ f.write('\nSSTATE_DIR_forcevariable = "%s"\n' % d.getVar('SSTATE_DIR'))
+ f.write('SSTATE_MIRRORS_forcevariable = "file://universal/(.*) file://universal-4.9/\\1 file://universal-4.9/(.*) file://universal-4.8/\\1"\n')
+ # Ensure TMPDIR is the default so that clean_esdk_builddir() can delete it
+ f.write('TMPDIR_forcevariable = "${TOPDIR}/tmp"\n')
+ f.write('TCLIBCAPPEND_forcevariable = ""\n')
+ # Drop uninative if the build isn't using it (or else NATIVELSBSTRING will
+ # be different and we won't be able to find our native sstate)
+ if not bb.data.inherits_class('uninative', d):
+ f.write('INHERIT_remove = "uninative"\n')
+
+ # Unfortunately the default SDKPATH (or even a custom value) may contain characters that bitbake
+ # will not allow in its COREBASE path, so we need to rename the directory temporarily
+ temp_sdkbasepath = d.getVar('SDK_OUTPUT') + '/tmp-renamed-sdk'
+ # Delete any existing temp dir
try:
- with open(sdkbasepath + '/conf/local.conf', 'a') as f:
- # Force the use of sstate from the build system
- f.write('\nSSTATE_DIR_forcevariable = "%s"\n' % d.getVar('SSTATE_DIR'))
- f.write('SSTATE_MIRRORS_forcevariable = "file://universal/(.*) file://universal-4.9/\\1 file://universal-4.9/(.*) file://universal-4.8/\\1"\n')
- # Ensure TMPDIR is the default so that clean_esdk_builddir() can delete it
- f.write('TMPDIR_forcevariable = "${TOPDIR}/tmp"\n')
- f.write('TCLIBCAPPEND_forcevariable = ""\n')
- # Drop uninative if the build isn't using it (or else NATIVELSBSTRING will
- # be different and we won't be able to find our native sstate)
- if not bb.data.inherits_class('uninative', d):
- f.write('INHERIT_remove = "uninative"\n')
-
- # Unfortunately the default SDKPATH (or even a custom value) may contain characters that bitbake
- # will not allow in its COREBASE path, so we need to rename the directory temporarily
- temp_sdkbasepath = d.getVar('SDK_OUTPUT') + '/tmp-renamed-sdk'
- # Delete any existing temp dir
- try:
- shutil.rmtree(temp_sdkbasepath)
- except FileNotFoundError:
- pass
- os.rename(sdkbasepath, temp_sdkbasepath)
- cmdprefix = '. %s .; ' % conf_initpath
- logfile = d.getVar('WORKDIR') + '/tasklist_bb_log.txt'
- try:
- oe.copy_buildsystem.check_sstate_task_list(d, get_sdk_install_targets(d), tasklistfile, cmdprefix=cmdprefix, cwd=temp_sdkbasepath, logfile=logfile)
- except bb.process.ExecutionError as e:
- msg = 'Failed to generate filtered task list for extensible SDK:\n%s' % e.stdout.rstrip()
- if 'attempted to execute unexpectedly and should have been setscened' in e.stdout:
- msg += '\n----------\n\nNOTE: "attempted to execute unexpectedly and should have been setscened" errors indicate this may be caused by missing sstate artifacts that were likely produced in earlier builds, but have been subsequently deleted for some reason.\n'
- bb.fatal(msg)
- os.rename(temp_sdkbasepath, sdkbasepath)
- # Clean out residue of running bitbake, which check_sstate_task_list()
- # will effectively do
- clean_esdk_builddir(d, sdkbasepath)
- finally:
- os.replace(sdkbasepath + '/conf/local.conf.bak', sdkbasepath + '/conf/local.conf')
+ shutil.rmtree(temp_sdkbasepath)
+ except FileNotFoundError:
+ pass
+ os.rename(sdkbasepath, temp_sdkbasepath)
+ cmdprefix = '. %s .; ' % conf_initpath
+ logfile = d.getVar('WORKDIR') + '/tasklist_bb_log.txt'
+ try:
+ oe.copy_buildsystem.check_sstate_task_list(d, get_sdk_install_targets(d), tasklistfile, cmdprefix=cmdprefix, cwd=temp_sdkbasepath, logfile=logfile)
+ except bb.process.ExecutionError as e:
+ msg = 'Failed to generate filtered task list for extensible SDK:\n%s' % e.stdout.rstrip()
+ if 'attempted to execute unexpectedly and should have been setscened' in e.stdout:
+ msg += '\n----------\n\nNOTE: "attempted to execute unexpectedly and should have been setscened" errors indicate this may be caused by missing sstate artifacts that were likely produced in earlier builds, but have been subsequently deleted for some reason.\n'
+ bb.fatal(msg)
+ os.rename(temp_sdkbasepath, sdkbasepath)
+ # Clean out residue of running bitbake, which check_sstate_task_list()
+ # will effectively do
+ clean_esdk_builddir(d, sdkbasepath)
+ os.replace(sdkbasepath + '/conf/local.conf.bak', sdkbasepath + '/conf/local.conf')
python copy_buildsystem () {
import re
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH 7/8] populate_sdk_ext.bbclass: remove the try...finally
2018-03-13 3:24 ` [PATCH 7/8] populate_sdk_ext.bbclass: remove the try...finally Robert Yang
@ 2018-03-13 14:57 ` Richard Purdie
2018-03-14 3:18 ` Robert Yang
0 siblings, 1 reply; 11+ messages in thread
From: Richard Purdie @ 2018-03-13 14:57 UTC (permalink / raw)
To: Robert Yang, openembedded-core
On Tue, 2018-03-13 at 11:24 +0800, Robert Yang wrote:
> The "sdkbasepath + '/conf/local.conf.bak" doesn't exist when
> "oe.copy_buildsystem.check_sstate_task_list()" fails, then
> os.replace() would
> raise FileNotFoundError, which overcomes the real error. Keep the
> error status
> makes debug easier, so remove the try..finally.
I don't think this patch is quite right. If there is a failure we
*must* make sure local.conf is restored, that is important. The code
should probably keep the try/finally but make the replace conditional
on the file existing.
Cheers,
Richard
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 7/8] populate_sdk_ext.bbclass: remove the try...finally
2018-03-13 14:57 ` Richard Purdie
@ 2018-03-14 3:18 ` Robert Yang
0 siblings, 0 replies; 11+ messages in thread
From: Robert Yang @ 2018-03-14 3:18 UTC (permalink / raw)
To: Richard Purdie, openembedded-core
On 03/13/2018 10:57 PM, Richard Purdie wrote:
> On Tue, 2018-03-13 at 11:24 +0800, Robert Yang wrote:
>> The "sdkbasepath + '/conf/local.conf.bak" doesn't exist when
>> "oe.copy_buildsystem.check_sstate_task_list()" fails, then
>> os.replace() would
>> raise FileNotFoundError, which overcomes the real error. Keep the
>> error status
>> makes debug easier, so remove the try..finally.
>
> I don't think this patch is quite right. If there is a failure we
> *must* make sure local.conf is restored, that is important. The code
> should probably keep the try/finally but make the replace conditional
> on the file existing.
Thanks, updated in the repo:
Author: Robert Yang <liezhi.yang@windriver.com>
Date: Wed Mar 14 10:01:51 2018 +0800
populate_sdk_ext.bbclass: only replace local.conf when local.conf.bak exists
The "sdkbasepath + '/conf/local.conf.bak'" doesn't exist when
"oe.copy_buildsystem.check_sstate_task_list()" fails since the sdkbasepath had
been renamed to temp_sdkbasepath, but can't rename back when
oe.copy_buildsystem.check_sstate_task_list() fails, then os.replace() would
raise FileNotFoundError, which overcomes the real error. Only replace
local.conf when local_conf.bak exists can make the debug easier.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
diff --git a/meta/classes/populate_sdk_ext.bbclass
b/meta/classes/populate_sdk_ext.bbclass
index 057c495..fa24fc4 100644
--- a/meta/classes/populate_sdk_ext.bbclass
+++ b/meta/classes/populate_sdk_ext.bbclass
@@ -141,9 +141,11 @@ def create_filtered_tasklist(d, sdkbasepath, tasklistfile,
conf_initpath):
import oe.copy_buildsystem
# Create a temporary build directory that we can pass to the env setup script
- shutil.copyfile(sdkbasepath + '/conf/local.conf', sdkbasepath +
'/conf/local.conf.bak')
+ local_conf = sdkbasepath + '/conf/local.conf'
+ local_conf_bak = local_conf + '.bak'
+ shutil.copyfile(local_conf, local_conf_bak)
try:
- with open(sdkbasepath + '/conf/local.conf', 'a') as f:
+ with open(local_conf, 'a') as f:
# Force the use of sstate from the build system
f.write('\nSSTATE_DIR_forcevariable = "%s"\n' %
d.getVar('SSTATE_DIR'))
f.write('SSTATE_MIRRORS_forcevariable = "file://universal/(.*)
file://universal-4.9/\\1 file://universal-4.9/(.*) file://universal-4.8/\\1"\n')
@@ -178,7 +180,8 @@ def create_filtered_tasklist(d, sdkbasepath, tasklistfile,
conf_initpath):
# will effectively do
clean_esdk_builddir(d, sdkbasepath)
finally:
- os.replace(sdkbasepath + '/conf/local.conf.bak', sdkbasepath +
'/conf/local.conf')
+ if os.path.exists(local_conf_bak):
+ os.replace(local_conf_bak, local_conf)
python copy_buildsystem () {
import re
// Robert
>
> Cheers,
>
> Richard
>
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH 8/8] staging.bbclass: extend_recipe_sysroot: fix multilib manifest
2018-03-13 3:24 [PATCH 0/8] [rebase and resend] fixes for multilib Robert Yang
` (6 preceding siblings ...)
2018-03-13 3:24 ` [PATCH 7/8] populate_sdk_ext.bbclass: remove the try...finally Robert Yang
@ 2018-03-13 3:24 ` Robert Yang
7 siblings, 0 replies; 11+ messages in thread
From: Robert Yang @ 2018-03-13 3:24 UTC (permalink / raw)
To: openembedded-core
Fixed:
MACHINE = "qemux86-64"
MULTILIBS = "multilib:lib32"
DEFAULTTUNE_virtclass-multilib-lib32 = "x86"
$ bitbake <image> -cpopulate_sdk_ext
[snip]
Exception: subprocess.CalledProcessError: Command 'sed -e [snip]'
[snip]
Subprocess output:
[snip]
sed: can't read /path/to/work/qemux86_64-wrs-linux/wrlinux-image-glibc-small/1.0-r1/recipe-sysroot/usr/lib/perl/5.24.1/ExtUtils/Liblist/Kid.pm: No such file or directory
[snip]
It was failed because "/usr/lib" is in qemux86_64-wrsmllib32-linux/, not in
qemux86_64-wrs-linux. The code has considered mutitlib, but seems not
completed, the multilib "variant" was not in fixme, so it wasn't handled
correctly, this patch fixes the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
---
meta/classes/staging.bbclass | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/meta/classes/staging.bbclass b/meta/classes/staging.bbclass
index c45ada4..1c2028c 100644
--- a/meta/classes/staging.bbclass
+++ b/meta/classes/staging.bbclass
@@ -492,11 +492,21 @@ python extend_recipe_sysroot() {
if c.endswith("-native") or "-cross-" in c or "-crosssdk" in c:
native = True
+ multilib = False
+ if setscenedeps[dep][2].startswith("virtual:multilib"):
+ variant = setscenedeps[dep][2].split(":")[2]
+ if variant not in fixme:
+ fixme[variant] = []
+ multilib = True
+
if manifest:
newmanifest = collections.OrderedDict()
if native:
fm = fixme['native']
targetdir = recipesysrootnative
+ elif multilib:
+ fm = fixme[variant]
+ targetdir = destsysroot
else:
fm = fixme['']
targetdir = destsysroot
--
2.7.4
^ permalink raw reply related [flat|nested] 11+ messages in thread