* [PATCH 7/8] oprofile: 0.9.9 -> 1.0.0
2014-11-04 11:39 [PATCH 1/8] nasm: 2.11.05 -> 2.11.06 Richard Purdie
` (4 preceding siblings ...)
2014-11-04 11:39 ` [PATCH 6/8] kexec-tools: 2.0.7 -> 2.0.8 Richard Purdie
@ 2014-11-04 11:39 ` Richard Purdie
2014-11-04 11:39 ` [PATCH 8/8] gdb: 7.7.1 -> 7.8 Richard Purdie
6 siblings, 0 replies; 10+ messages in thread
From: Richard Purdie @ 2014-11-04 11:39 UTC (permalink / raw)
To: openembedded-core
opcontrol is now dropped and replaced with the operf interface. As such, we drop
the opstart/opstop commands and any patches related to the old removed interfaces.
Some patches were also mered upstream so those are also dropped.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
---
meta/recipes-kernel/oprofile/oprofile.inc | 2 +-
.../0001-Add-freescale-e500mc-support.patch | 219 -------------
...d-rmb-definition-for-AArch64-architecture.patch | 31 --
.../0001-Tidy-powerpc64-bfd-target-check.patch | 123 -------
.../0002-Add-freescale-e6500-support.patch | 364 ---------------------
.../recipes-kernel/oprofile/oprofile/opstart.patch | 245 --------------
.../oprofile/oprofile/root-home-dir.patch | 134 ++------
meta/recipes-kernel/oprofile/oprofile_0.9.9.bb | 17 -
meta/recipes-kernel/oprofile/oprofile_1.0.0.bb | 12 +
9 files changed, 42 insertions(+), 1105 deletions(-)
delete mode 100644 meta/recipes-kernel/oprofile/oprofile/0001-Add-freescale-e500mc-support.patch
delete mode 100644 meta/recipes-kernel/oprofile/oprofile/0001-Add-rmb-definition-for-AArch64-architecture.patch
delete mode 100644 meta/recipes-kernel/oprofile/oprofile/0001-Tidy-powerpc64-bfd-target-check.patch
delete mode 100644 meta/recipes-kernel/oprofile/oprofile/0002-Add-freescale-e6500-support.patch
delete mode 100644 meta/recipes-kernel/oprofile/oprofile/opstart.patch
delete mode 100644 meta/recipes-kernel/oprofile/oprofile_0.9.9.bb
create mode 100644 meta/recipes-kernel/oprofile/oprofile_1.0.0.bb
diff --git a/meta/recipes-kernel/oprofile/oprofile.inc b/meta/recipes-kernel/oprofile/oprofile.inc
index 6958203..77c245c 100644
--- a/meta/recipes-kernel/oprofile/oprofile.inc
+++ b/meta/recipes-kernel/oprofile/oprofile.inc
@@ -18,7 +18,7 @@ FILES_${PN} = "${bindir} ${libdir}/${BPN}/lib*${SOLIBS} ${datadir}/${BPN}"
FILES_${PN}-dev += "${libdir}/${BPN}/lib*${SOLIBSDEV} ${libdir}/${BPN}/lib*.la"
FILES_${PN}-staticdev += "${libdir}/${BPN}/lib*.a"
-SRC_URI = "file://opstart.patch \
+SRC_URI = "\
file://acinclude.m4 \
file://automake-foreign.patch \
file://oprofile-cross-compile-tests.patch \
diff --git a/meta/recipes-kernel/oprofile/oprofile/0001-Add-freescale-e500mc-support.patch b/meta/recipes-kernel/oprofile/oprofile/0001-Add-freescale-e500mc-support.patch
deleted file mode 100644
index 077da4b..0000000
--- a/meta/recipes-kernel/oprofile/oprofile/0001-Add-freescale-e500mc-support.patch
+++ /dev/null
@@ -1,219 +0,0 @@
-From ca3f796b3a7742215ed35b56fc072595174c410e Mon Sep 17 00:00:00 2001
-From: Ting Liu <b28495@freescale.com>
-Date: Thu, 5 Sep 2013 07:43:55 -0500
-Subject: [PATCH 1/2] Add freescale e500mc support
-
-Upstream-Status: Backport
-
-Signed-off-by: George Stephen <Stephen.George@freescale.com>
-Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
-Signed-off-by: Ting Liu <b28495@freescale.com>
----
- events/Makefile.am | 1 +
- events/ppc/e500mc/events | 120 ++++++++++++++++++++++++++++++++++++++++++
- events/ppc/e500mc/unit_masks | 4 ++
- libop/op_cpu_type.c | 1 +
- libop/op_cpu_type.h | 1 +
- libop/op_events.c | 1 +
- utils/ophelp.c | 1 +
- 7 files changed, 129 insertions(+), 0 deletions(-)
- create mode 100644 events/ppc/e500mc/events
- create mode 100644 events/ppc/e500mc/unit_masks
-
-diff --git a/events/Makefile.am b/events/Makefile.am
-index be87781..e496f98 100644
---- a/events/Makefile.am
-+++ b/events/Makefile.am
-@@ -76,6 +76,7 @@ event_files = \
- ppc/7450/events ppc/7450/unit_masks \
- ppc/e500/events ppc/e500/unit_masks \
- ppc/e500v2/events ppc/e500v2/unit_masks \
-+ ppc/e500mc/events ppc/e500mc/unit_masks \
- ppc/e300/events ppc/e300/unit_masks \
- tile/tile64/events tile/tile64/unit_masks \
- tile/tilepro/events tile/tilepro/unit_masks \
-diff --git a/events/ppc/e500mc/events b/events/ppc/e500mc/events
-new file mode 100644
-index 0000000..8197a7d
---- /dev/null
-+++ b/events/ppc/e500mc/events
-@@ -0,0 +1,120 @@
-+# e500mc Events
-+#
-+# Copyright (C) 2010 Freescale Semiconductor, Inc.
-+#
-+event:0x1 counters:0,1,2,3 um:zero minimum:100 name:CPU_CLK : Cycles
-+event:0x2 counters:0,1,2,3 um:zero minimum:500 name:COMPLETED_INSNS : Completed Instructions (0, 1, or 2 per cycle)
-+event:0x3 counters:0,1,2,3 um:zero minimum:500 name:COMPLETED_OPS : Completed Micro-ops (counts 2 for load/store w/update)
-+event:0x4 counters:0,1,2,3 um:zero minimum:500 name:INSTRUCTION_FETCHES : Instruction fetches
-+event:0x5 counters:0,1,2,3 um:zero minimum:500 name:DECODED_OPS : Micro-ops decoded
-+event:0x8 counters:0,1,2,3 um:zero minimum:500 name:COMPLETED_BRANCHES : Branch Instructions completed
-+event:0x9 counters:0,1,2,3 um:zero minimum:500 name:COMPLETED_LOAD_OPS : Load micro-ops completed
-+event:0xa counters:0,1,2,3 um:zero minimum:500 name:COMPLETED_STORE_OPS : Store micro-ops completed
-+event:0xb counters:0,1,2,3 um:zero minimum:500 name:COMPLETION_REDIRECTS : Number of completion buffer redirects
-+event:0xc counters:0,1,2,3 um:zero minimum:500 name:BRANCHES_FINISHED : Branches finished
-+event:0xd counters:0,1,2,3 um:zero minimum:500 name:TAKEN_BRANCHES_FINISHED : Taken branches finished
-+event:0xe counters:0,1,2,3 um:zero minimum:500 name:BIFFED_BRANCHES_FINISHED : Biffed branches finished
-+event:0xf counters:0,1,2,3 um:zero minimum:500 name:BRANCHES_MISPREDICTED : Branch instructions mispredicted due to direction, target, or IAB prediction
-+event:0x10 counters:0,1,2,3 um:zero minimum:500 name:BRANCHES_MISPREDICTED_DIRECTION : Branches mispredicted due to direction prediction
-+event:0x11 counters:0,1,2,3 um:zero minimum:500 name:BTB_HITS : Branches that hit in the BTB, or missed but are not taken
-+event:0x12 counters:0,1,2,3 um:zero minimum:500 name:DECODE_STALLED : Cycles the instruction buffer was not empty, but 0 instructions decoded
-+event:0x13 counters:0,1,2,3 um:zero minimum:500 name:ISSUE_STALLED : Cycles the issue buffer is not empty but 0 instructions issued
-+event:0x14 counters:0,1,2,3 um:zero minimum:500 name:BRANCH_ISSUE_STALLED : Cycles the branch buffer is not empty but 0 instructions issued
-+event:0x15 counters:0,1,2,3 um:zero minimum:500 name:SRS0_SCHEDULE_STALLED : Cycles SRS0 is not empty but 0 instructions scheduled
-+event:0x16 counters:0,1,2,3 um:zero minimum:500 name:SRS1_SCHEDULE_STALLED : Cycles SRS1 is not empty but 0 instructions scheduled
-+event:0x17 counters:0,1,2,3 um:zero minimum:500 name:VRS_SCHEDULE_STALLED : Cycles VRS is not empty but 0 instructions scheduled
-+event:0x18 counters:0,1,2,3 um:zero minimum:500 name:LRS_SCHEDULE_STALLED : Cycles LRS is not empty but 0 instructions scheduled
-+event:0x19 counters:0,1,2,3 um:zero minimum:500 name:BRS_SCHEDULE_STALLED : Cycles BRS is not empty but 0 instructions scheduled Load/Store, Data Cache, and dLFB Events
-+event:0x1a counters:0,1,2,3 um:zero minimum:500 name:TOTAL_TRANSLATED : Total Ldst microops translated.
-+event:0x1b counters:0,1,2,3 um:zero minimum:500 name:LOADS_TRANSLATED : Number of cacheable L* or EVL* microops translated. (This includes microops from load-multiple, load-update, and load-context instructions.)
-+event:0x1c counters:0,1,2,3 um:zero minimum:500 name:STORES_TRANSLATED : Number of cacheable ST* or EVST* microops translated. (This includes microops from store-multiple, store-update, and save-context instructions.)
-+event:0x1d counters:0,1,2,3 um:zero minimum:500 name:TOUCHES_TRANSLATED : Number of cacheable DCBT and DCBTST instructions translated (L1 only) (Does not count touches that are converted to nops i.e. exceptions, noncacheable, hid0[nopti] bit is set.)
-+event:0x1e counters:0,1,2,3 um:zero minimum:500 name:CACHEOPS_TRANSLATED : Number of dcba, dcbf, dcbst, and dcbz instructions translated (e500 traps on dcbi)
-+event:0x1f counters:0,1,2,3 um:zero minimum:500 name:CACHEINHIBITED_ACCESSES_TRANSLATED : Number of cache inhibited accesses translated
-+event:0x20 counters:0,1,2,3 um:zero minimum:500 name:GUARDED_LOADS_TRANSLATED : Number of guarded loads translated
-+event:0x21 counters:0,1,2,3 um:zero minimum:500 name:WRITETHROUGH_STORES_TRANSLATED : Number of write-through stores translated
-+event:0x22 counters:0,1,2,3 um:zero minimum:500 name:MISALIGNED_ACCESSES_TRANSLATED : Number of misaligned load or store accesses translated.
-+event:0x23 counters:0,1,2,3 um:zero minimum:500 name:TOTAL_ALLOCATED_DLFB : Total allocated to dLFB
-+event:0x24 counters:0,1,2,3 um:zero minimum:500 name:LOADS_TRANSLATED_ALLOCATED_DLFB : Loads translated and allocated to dLFB (Applies to same class of instructions as loads translated.)
-+event:0x25 counters:0,1,2,3 um:zero minimum:500 name:STORES_COMPLETED_ALLOCATED_DLFB : Stores completed and allocated to dLFB (Applies to same class of instructions as stores translated.)
-+event:0x26 counters:0,1,2,3 um:zero minimum:500 name:TOUCHES_TRANSLATED_ALLOCATED_DLFB : Touches translated and allocated to dLFB (Applies to same class of instructions as touches translated.)
-+event:0x27 counters:0,1,2,3 um:zero minimum:500 name:STORES_COMPLETED : Number of cacheable ST* or EVST* microops completed. (Applies to the same class of instructions as stores translated.)
-+event:0x28 counters:0,1,2,3 um:zero minimum:500 name:DL1_LOCKS : Number of cache lines locked in the dL1. (Counts a lock even if an overlock condition is encountered.)
-+event:0x29 counters:0,1,2,3 um:zero minimum:500 name:DL1_RELOADS : This is historically used to determine dcache miss rate (along with loads/stores completed). This counts dL1 reloads for any reason.
-+event:0x2a counters:0,1,2,3 um:zero minimum:500 name:DL1_CASTOUTS : dL1 castouts. Does not count castouts due to DCBF.
-+event:0x2b counters:0,1,2,3 um:zero minimum:500 name:DETECTED_REPLAYS : Times detected replay condition - Load miss with dLFB full.
-+event:0x2c counters:0,1,2,3 um:zero minimum:500 name:LOAD_MISS_QUEUE_FULL_REPLAYS : Load miss with load queue full.
-+event:0x2d counters:0,1,2,3 um:zero minimum:500 name:LOAD_GUARDED_MISS_NOT_LAST_REPLAYS : Load guarded miss when the load is not yet at the bottom of the completion buffer.
-+event:0x2e counters:0,1,2,3 um:zero minimum:500 name:STORE_TRANSLATED_QUEUE_FULL_REPLAYS : Translate a store when the StQ is full.
-+event:0x2f counters:0,1,2,3 um:zero minimum:500 name:ADDRESS_COLLISION_REPLAYS : Address collision.
-+event:0x30 counters:0,1,2,3 um:zero minimum:500 name:DMMU_MISS_REPLAYS : DMMU_MISS_REPLAYS : DMMU miss.
-+event:0x31 counters:0,1,2,3 um:zero minimum:500 name:DMMU_BUSY_REPLAYS : DMMU_BUSY_REPLAYS : DMMU busy.
-+event:0x32 counters:0,1,2,3 um:zero minimum:500 name:SECOND_PART_MISALIGNED_AFTER_MISS_REPLAYS : Second part of misaligned access when first part missed in cache.
-+event:0x33 counters:0,1,2,3 um:zero minimum:500 name:LOAD_MISS_DLFB_FULL_CYCLES : Cycles stalled on replay condition - Load miss with dLFB full.
-+event:0x34 counters:0,1,2,3 um:zero minimum:500 name:LOAD_MISS_QUEUE_FULL_CYCLES : Cycles stalled on replay condition - Load miss with load queue full.
-+event:0x35 counters:0,1,2,3 um:zero minimum:500 name:LOAD_GUARDED_MISS_NOT_LAST_CYCLES : Cycles stalled on replay condition - Load guarded miss when the load is not yet at the bottom of the completion buffer.
-+event:0x36 counters:0,1,2,3 um:zero minimum:500 name:STORE_TRANSLATED_QUEUE_FULL_CYCLES : Cycles stalled on replay condition - Translate a store when the StQ is full.
-+event:0x37 counters:0,1,2,3 um:zero minimum:500 name:ADDRESS_COLLISION_CYCLES : Cycles stalled on replay condition - Address collision.
-+event:0x38 counters:0,1,2,3 um:zero minimum:500 name:DMMU_MISS_CYCLES : Cycles stalled on replay condition - DMMU miss.
-+event:0x39 counters:0,1,2,3 um:zero minimum:500 name:DMMU_BUSY_CYCLES : Cycles stalled on replay condition - DMMU busy.
-+event:0x3a counters:0,1,2,3 um:zero minimum:500 name:SECOND_PART_MISALIGNED_AFTER_MISS_CYCLES : Cycles stalled on replay condition - Second part of misaligned access when first part missed in cache.
-+event:0x3b counters:0,1,2,3 um:zero minimum:500 name:IL1_LOCKS : Number of cache lines locked in the iL1. (Counts a lock even if an overlock condition is encountered.)
-+event:0x3c counters:0,1,2,3 um:zero minimum:500 name:IL1_FETCH_RELOADS : This is historically used to determine icache miss rate (along with instructions completed) Reloads due to demand fetch.
-+event:0x3d counters:0,1,2,3 um:zero minimum:500 name:FETCHES : Counts the number of fetches that write at least one instruction to the instruction buffer. (With instruction fetched, can used to compute instructions-per-fetch)
-+event:0x3e counters:0,1,2,3 um:zero minimum:500 name:IMMU_TLB4K_RELOADS : iMMU TLB4K reloads
-+event:0x3f counters:0,1,2,3 um:zero minimum:500 name:IMMU_VSP_RELOADS : iMMU VSP reloads
-+event:0x40 counters:0,1,2,3 um:zero minimum:500 name:DMMU_TLB4K_RELOADS : dMMU TLB4K reloads
-+event:0x41 counters:0,1,2,3 um:zero minimum:500 name:DMMU_VSP_RELOADS : dMMU VSP reloads
-+event:0x42 counters:0,1,2,3 um:zero minimum:500 name:L2MMU_MISSES : Counts iTLB/dTLB error interrupt
-+event:0x43 counters:0,1,2,3 um:zero minimum:500 name:BIU_MASTER_REQUESTS : Number of master transactions. (Number of master TSs.)
-+event:0x44 counters:0,1,2,3 um:zero minimum:500 name:BIU_MASTER_I_REQUESTS : Number of master I-Side transactions. (Number of master I-Side TSs.)
-+event:0x45 counters:0,1,2,3 um:zero minimum:500 name:BIU_MASTER_D_REQUESTS : Number of master D-Side transactions. (Number of master D-Side TSs.)
-+event:0x46 counters:0,1,2,3 um:zero minimum:500 name:BIU_MASTER_D_CASTOUT_REQUESTS : Number of master D-Side non-program-demand castout transactions. This counts replacement pushes and snoop pushes. This does not count DCBF castouts. (Number of master D-side non-program-demand castout TSs.)
-+event:0x48 counters:0,1,2,3 um:zero minimum:500 name:SNOOP_REQUESTS : Number of externally generated snoop requests. (Counts snoop TSs.)
-+event:0x49 counters:0,1,2,3 um:zero minimum:500 name:SNOOP_HITS : Number of snoop hits on all D-side resources regardless of the cache state (modified, exclusive, or shared)
-+event:0x4a counters:0,1,2,3 um:zero minimum:500 name:SNOOP_PUSHES : Number of snoop pushes from all D-side resources. (Counts snoop ARTRY/WOPs.)
-+event:0x52 counters:0,1,2,3 um:zero minimum:500 name:PMC0_OVERFLOW : Counts the number of times PMC0[32] transitioned from 1 to 0.
-+event:0x53 counters:0,1,2,3 um:zero minimum:500 name:PMC1_OVERFLOW : Counts the number of times PMC1[32] transitioned from 1 to 0.
-+event:0x54 counters:0,1,2,3 um:zero minimum:500 name:PMC2_OVERFLOW : Counts the number of times PMC2[32] transitioned from 1 to 0.
-+event:0x55 counters:0,1,2,3 um:zero minimum:500 name:PMC3_OVERFLOW : Counts the number of times PMC3[32] transitioned from 1 to 0.
-+event:0x56 counters:0,1,2,3 um:zero minimum:500 name:INTERRUPTS : Number of interrupts taken
-+event:0x57 counters:0,1,2,3 um:zero minimum:500 name:EXTERNAL_INTERRUPTS : Number of external input interrupts taken
-+event:0x58 counters:0,1,2,3 um:zero minimum:500 name:CRITICAL_INTERRUPTS : Number of critical input interrupts taken
-+event:0x59 counters:0,1,2,3 um:zero minimum:500 name:SC_TRAP_INTERRUPTS : Number of system call and trap interrupts
-+event:0x5b counters:0,1,2,3 um:zero minimum:500 name:L2_LINEFILL_REQ : Number L2 Linefill requests
-+event:0x5c counters:0,1,2,3 um:zero minimum:500 name:L2_VICTIM_SELECT : Number L2 Victim selects
-+event:0x6e counters:0,1,2,3 um:zero minimum:500 name:L2_ACCESS : Number L2 cache accesses
-+event:0x6f counters:0,1,2,3 um:zero minimum:500 name:L2_HIT_ACCESS : Number L2 hit cache accesses
-+event:0x70 counters:0,1,2,3 um:zero minimum:500 name:L2_DATA_ACCESS : Number L2 data cache accesses
-+event:0x71 counters:0,1,2,3 um:zero minimum:500 name:L2_HIT_DATA_ACCESS : Number L2 hit data cache accesses
-+event:0x72 counters:0,1,2,3 um:zero minimum:500 name:L2_INST_ACCESS : Number L2 instruction cache accesses
-+event:0x73 counters:0,1,2,3 um:zero minimum:500 name:L2_HIT_INST_ACCESS : Number L2 hit instruction cache accesses
-+event:0x74 counters:0,1,2,3 um:zero minimum:500 name:L2_ALLOC : Number L2 cache allocations
-+event:0x75 counters:0,1,2,3 um:zero minimum:500 name:L2_DATA_ALLOC : Number L2 data cache allocations
-+event:0x76 counters:0,1,2,3 um:zero minimum:500 name:L2_DIRTY_DATA_ALLOC : Number L2 dirty data cache allocations
-+event:0x77 counters:0,1,2,3 um:zero minimum:500 name:L2_INST_ALLOC : Number L2 instruction cache allocations
-+event:0x78 counters:0,1,2,3 um:zero minimum:500 name:L2_UPDATE : Number L2 cache updates
-+event:0x79 counters:0,1,2,3 um:zero minimum:500 name:L2_CLEAN_UPDATE : Number L2 cache clean updates
-+event:0x7a counters:0,1,2,3 um:zero minimum:500 name:L2_DIRTY_UPDATE : Number L2 cache dirty updates
-+event:0x7b counters:0,1,2,3 um:zero minimum:500 name:L2_CLEAN_REDU_UPDATE : Number L2 cache clean redundant updates
-+event:0x7c counters:0,1,2,3 um:zero minimum:500 name:L2_DIRTY_REDU_UPDATE : Number L2 cache dirty redundant updates
-+event:0x7d counters:0,1,2,3 um:zero minimum:500 name:L2_LOCKS : Number L2 cache locks
-+event:0x7e counters:0,1,2,3 um:zero minimum:500 name:L2_CASTOUT : Number L2 cache castouts
-+event:0x7f counters:0,1,2,3 um:zero minimum:500 name:L2_HIT_DATA_DIRTY : Number L2 cache data dirty hits
-+event:0x82 counters:0,1,2,3 um:zero minimum:500 name:L2_INV_CLEAN : Number L2 cache invalidation of clean lines
-+event:0x83 counters:0,1,2,3 um:zero minimum:500 name:L2_INV_INCOHER : Number L2 cache invalidation of incoherent lines
-+event:0x84 counters:0,1,2,3 um:zero minimum:500 name:L2_INV_COHER : Number L2 cache invalidation of coherent lines
-+event:0x94 counters:0,1,2,3 um:zero minimum:500 name:DVT0 : Detection of write to DEVENT with DVT0 set
-+event:0x95 counters:0,1,2,3 um:zero minimum:500 name:DVT1 : Detection of write to DEVENT with DVT1 set
-+event:0x96 counters:0,1,2,3 um:zero minimum:500 name:DVT2 : Detection of write to DEVENT with DVT2 set
-+event:0x97 counters:0,1,2,3 um:zero minimum:500 name:DVT3 : Detection of write to DEVENT with DVT3 set
-+event:0x98 counters:0,1,2,3 um:zero minimum:500 name:DVT4 : Detection of write to DEVENT with DVT4 set
-+event:0x99 counters:0,1,2,3 um:zero minimum:500 name:DVT5 : Detection of write to DEVENT with DVT5 set
-+event:0x9a counters:0,1,2,3 um:zero minimum:500 name:DVT6 : Detection of write to DEVENT with DVT6 set
-+event:0x9b counters:0,1,2,3 um:zero minimum:500 name:DVT7 : Detection of write to DEVENT with DVT7 set
-+event:0x9c counters:0,1,2,3 um:zero minimum:500 name:CYCLES_NEXUS_STALLED : Number of completion cycles stalled due to Nexus FIFO full
-+event:0xb0 counters:0,1,2,3 um:zero minimum:500 name:DECORATED_LOAD : Number of decorated loads.
-+event:0xb1 counters:0,1,2,3 um:zero minimum:500 name:DECORATED_STORE : Number of decorated stores
-+event:0xb2 counters:0,1,2,3 um:zero minimum:500 name:LOAD_RETRY : Number of load retries
-+event:0xb3 counters:0,1,2,3 um:zero minimum:500 name:STWCX_SUCCESS : Number of successful stwcx. instructions
-+event:0xb4 counters:0,1,2,3 um:zero minimum:500 name:STWCX_UNSUCCESS : Number of unsuccessful stwcx. instructions
-diff --git a/events/ppc/e500mc/unit_masks b/events/ppc/e500mc/unit_masks
-new file mode 100644
-index 0000000..395c653
---- /dev/null
-+++ b/events/ppc/e500mc/unit_masks
-@@ -0,0 +1,4 @@
-+# e500 possible unit masks
-+#
-+name:zero type:mandatory default:0x0
-+ 0x0 No unit mask
-diff --git a/libop/op_cpu_type.c b/libop/op_cpu_type.c
-index 89d5a92..7d50a2d 100644
---- a/libop/op_cpu_type.c
-+++ b/libop/op_cpu_type.c
-@@ -125,6 +125,7 @@ static struct cpu_descr const cpu_descrs[MAX_CPU_TYPE] = {
- { "AMD64 generic", "x86-64/generic", CPU_AMD64_GENERIC, 4 },
- { "IBM Power Architected Events V1", "ppc64/architected_events_v1", CPU_PPC64_ARCH_V1, 6 },
- { "ppc64 POWER8", "ppc64/power8", CPU_PPC64_POWER8, 6 },
-+ { "e500mc", "ppc/e500mc", CPU_PPC_E500MC, 4 },
- };
-
- static size_t const nr_cpu_descrs = sizeof(cpu_descrs) / sizeof(struct cpu_descr);
-diff --git a/libop/op_cpu_type.h b/libop/op_cpu_type.h
-index aeb6bb2..10f000b 100644
---- a/libop/op_cpu_type.h
-+++ b/libop/op_cpu_type.h
-@@ -105,6 +105,7 @@ typedef enum {
- CPU_AMD64_GENERIC, /**< AMD64 Generic */
- CPU_PPC64_ARCH_V1, /** < IBM Power architected events version 1 */
- CPU_PPC64_POWER8, /**< ppc64 POWER8 family */
-+ CPU_PPC_E500MC, /**< e500mc */
- MAX_CPU_TYPE
- } op_cpu;
-
-diff --git a/libop/op_events.c b/libop/op_events.c
-index bb86833..638dc5c 100644
---- a/libop/op_events.c
-+++ b/libop/op_events.c
-@@ -1308,6 +1308,7 @@ void op_default_event(op_cpu cpu_type, struct op_default_event_descr * descr)
-
- case CPU_PPC_E500:
- case CPU_PPC_E500_2:
-+ case CPU_PPC_E500MC:
- case CPU_PPC_E300:
- descr->name = "CPU_CLK";
- break;
-diff --git a/utils/ophelp.c b/utils/ophelp.c
-index 1b913ca..0647360 100644
---- a/utils/ophelp.c
-+++ b/utils/ophelp.c
-@@ -753,6 +753,7 @@ int main(int argc, char const * argv[])
-
- case CPU_PPC_E500:
- case CPU_PPC_E500_2:
-+ case CPU_PPC_E500MC:
- event_doc =
- "See PowerPC e500 Core Complex Reference Manual\n"
- "Chapter 7: Performance Monitor\n"
---
diff --git a/meta/recipes-kernel/oprofile/oprofile/0001-Add-rmb-definition-for-AArch64-architecture.patch b/meta/recipes-kernel/oprofile/oprofile/0001-Add-rmb-definition-for-AArch64-architecture.patch
deleted file mode 100644
index a2385cd..0000000
--- a/meta/recipes-kernel/oprofile/oprofile/0001-Add-rmb-definition-for-AArch64-architecture.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 27edaef9c6d66dfc324630ef40cb27e78031eeeb Mon Sep 17 00:00:00 2001
-From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
-Date: Tue, 15 Jan 2013 07:37:33 +0100
-Subject: [PATCH] Add rmb() definition for AArch64 architecture
-
-Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
-
-Upstream-Status: backport
----
- libperf_events/operf_utils.h | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/libperf_events/operf_utils.h b/libperf_events/operf_utils.h
-index 815d51d..2df00b7 100644
---- a/libperf_events/operf_utils.h
-+++ b/libperf_events/operf_utils.h
-@@ -148,6 +148,11 @@ void op_release_resources(void);
- #define cpu_relax() asm volatile("":::"memory")
- #endif
-
-+#ifdef __aarch64__
-+#define rmb() asm volatile("dmb ld" ::: "memory")
-+#define cpu_relax() asm volatile("yield" ::: "memory")
-+#endif
-+
- #ifdef __mips__
- #include <asm/unistd.h>
- #define rmb() asm volatile( \
---
-1.8.0
-
diff --git a/meta/recipes-kernel/oprofile/oprofile/0001-Tidy-powerpc64-bfd-target-check.patch b/meta/recipes-kernel/oprofile/oprofile/0001-Tidy-powerpc64-bfd-target-check.patch
deleted file mode 100644
index 93c6240..0000000
--- a/meta/recipes-kernel/oprofile/oprofile/0001-Tidy-powerpc64-bfd-target-check.patch
+++ /dev/null
@@ -1,123 +0,0 @@
-Upstream-Status: Backport
-
-From 63b5692aace5ff6022f892822b4bfdc51ed25bfb Mon Sep 17 00:00:00 2001
-From: Alan Modra <amodra@gmail.com>
-Date: Fri, 2 May 2014 07:54:08 -0500
-Subject: [PATCH] Tidy powerpc64 bfd target check
-
-Testing for a bfd_target vector might (will!) break. See
-https://sourceware.org/ml/binutils/2014-04/msg00283.html
-
-It's safer to ask BFD for the target name. I left the direct target
-vector checks in configure tests, and updated them, even though the
-target vector is no longer used in oprofile code, because a run-time
-configure test for powerpc64 support in bfd:
- #include <bfd.h>
- int main(void)
- { return !bfd_find_target("elf64-powerpc", (void *)0); }
-unfortunately isn't possible when cross-compiling.
-
-The bfd_target vector tests could be omitted if we aren't bothered by
-the small runtime overhead of a strncmp on targets other than
-powerpc64.
-
- * libutil++/bfd_support.cpp (get_synth_symbols): Don't check for
- ppc64 target vector, use bfd_get_target to return the target
- name instead.
- * m4/binutils.m4: Modernize bfd_get_synthetic_symtab checks to
- use AC_LINK_IFELSE. Check for either powerpc_elf64_vec or
- bfd_elf64_powerpc_vec.
-
-Signed-off-by: Alan Modra <amodra@gmail.com>
----
- libutil++/bfd_support.cpp | 10 +++++++--
- m4/binutils.m4 | 50 ++++++++++++++++++++++-----------------------
- 2 files changed, 33 insertions(+), 27 deletions(-)
-
-Index: oprofile-0.9.9/libutil++/bfd_support.cpp
-===================================================================
---- oprofile-0.9.9.orig/libutil++/bfd_support.cpp 2013-07-29 08:55:06.000000000 -0700
-+++ oprofile-0.9.9/libutil++/bfd_support.cpp 2014-05-02 09:12:05.761146347 -0700
-@@ -633,10 +633,16 @@
-
- bool bfd_info::get_synth_symbols()
- {
-- extern const bfd_target bfd_elf64_powerpc_vec;
-- extern const bfd_target bfd_elf64_powerpcle_vec;
-- bool is_elf64_powerpc_target = (abfd->xvec == &bfd_elf64_powerpc_vec)
-- || (abfd->xvec == &bfd_elf64_powerpcle_vec);
-+ const char* targname = bfd_get_target(abfd);
-+ // Match elf64-powerpc and elf64-powerpc-freebsd, but not
-+ // elf64-powerpcle. elf64-powerpcle is a different ABI without
-+ // function descriptors, so we don't need the synthetic
-+ // symbols to have function code marked by a symbol.
-+ bool is_elf64_powerpc_target = (!strncmp(targname, "elf64-powerpc", 13)
-+ && (targname[13] == 0
-+ || targname[13] == '-'));
-+
-+
-
- if (!is_elf64_powerpc_target)
- return false;
-Index: oprofile-0.9.9/m4/binutils.m4
-===================================================================
---- oprofile-0.9.9.orig/m4/binutils.m4 2013-07-29 08:55:07.000000000 -0700
-+++ oprofile-0.9.9/m4/binutils.m4 2014-05-02 09:07:32.471148147 -0700
-@@ -22,32 +22,32 @@
-
- AC_LANG_PUSH(C)
- # Determine if bfd_get_synthetic_symtab macro is available
--OS="`uname`"
--if test "$OS" = "Linux"; then
-- AC_MSG_CHECKING([whether bfd_get_synthetic_symtab() exists in BFD library])
-- rm -f test-for-synth
-- AC_LANG_CONFTEST(
-- [AC_LANG_PROGRAM([[#include <bfd.h>]],
-- [[asymbol * synthsyms; bfd * ibfd = 0;
-- long synth_count = bfd_get_synthetic_symtab(ibfd, 0, 0, 0, 0, &synthsyms);
-- extern const bfd_target bfd_elf64_powerpc_vec;
-- extern const bfd_target bfd_elf64_powerpcle_vec;
-- char * ppc_name = bfd_elf64_powerpc_vec.name;
-- char * ppcle_name = bfd_elf64_powerpcle_vec.name;
-- printf("%s %s\n", ppc_name, ppcle_name);]])
-- ])
-- $CC conftest.$ac_ext $CFLAGS $LDFLAGS $LIBS -o test-for-synth > /dev/null 2>&1
-- if test -f test-for-synth; then
-- echo "yes"
-- SYNTHESIZE_SYMBOLS='1'
-- else
-- echo "no"
-- SYNTHESIZE_SYMBOLS='0'
-- fi
-- AC_DEFINE_UNQUOTED(SYNTHESIZE_SYMBOLS, $SYNTHESIZE_SYMBOLS, [Synthesize special symbols when needed])
-- rm -f test-for-synth*
-+AC_MSG_CHECKING([whether bfd_get_synthetic_symtab() exists in BFD library])
-+AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <bfd.h>
-+ ]],
-+ [[asymbol * synthsyms; bfd * ibfd = 0;
-+ long synth_count = bfd_get_synthetic_symtab(ibfd, 0, 0, 0, 0, &synthsyms);
-+ extern const bfd_target powerpc_elf64_vec;
-+ char *ppc_name = powerpc_elf64_vec.name;
-+ printf("%s\n", ppc_name);
-+ ]])],
-+ [AC_MSG_RESULT([yes])
-+ SYNTHESIZE_SYMBOLS=2],
-+ [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <bfd.h>
-+ ]],
-+ [[asymbol * synthsyms; bfd * ibfd = 0;
-+ long synth_count = bfd_get_synthetic_symtab(ibfd, 0, 0, 0, 0, &synthsyms);
-+ extern const bfd_target bfd_elf64_powerpc_vec;
-+ char *ppc_name = bfd_elf64_powerpc_vec.name;
-+ printf("%s\n", ppc_name);
-+ ]])],
-+ [AC_MSG_RESULT([yes])
-+ SYNTHESIZE_SYMBOLS=1],
-+ [AC_MSG_RESULT([no])
-+ SYNTHESIZE_SYMBOLS=0])
-+ ])
-+AC_DEFINE_UNQUOTED(SYNTHESIZE_SYMBOLS, $SYNTHESIZE_SYMBOLS, [Synthesize special symbols when needed])
-
--fi
- AC_LANG_POP(C)
- ]
- )
diff --git a/meta/recipes-kernel/oprofile/oprofile/0002-Add-freescale-e6500-support.patch b/meta/recipes-kernel/oprofile/oprofile/0002-Add-freescale-e6500-support.patch
deleted file mode 100644
index 9b2ae04..0000000
--- a/meta/recipes-kernel/oprofile/oprofile/0002-Add-freescale-e6500-support.patch
+++ /dev/null
@@ -1,364 +0,0 @@
-From b91794fd855177946719b34ea5cd3822c7993caa Mon Sep 17 00:00:00 2001
-From: Ting Liu <b28495@freescale.com>
-Date: Thu, 5 Sep 2013 07:45:52 -0500
-Subject: [PATCH 2/2] Add freescale e6500 support
-
-Upstream-Status: Backport
-
-Signed-off-by: Zhenhua Luo <zhenhua.luo@freescale.com>
-Signed-off-by: Ting Liu <b28495@freescale.com>
----
- events/Makefile.am | 1 +
- events/ppc/e6500/events | 266 +++++++++++++++++++++++++++++++++++++++++++
- events/ppc/e6500/unit_masks | 4 +
- libop/op_cpu_type.c | 1 +
- libop/op_cpu_type.h | 1 +
- libop/op_events.c | 1 +
- utils/ophelp.c | 1 +
- 7 files changed, 275 insertions(+), 0 deletions(-)
- create mode 100644 events/ppc/e6500/events
- create mode 100644 events/ppc/e6500/unit_masks
-
-diff --git a/events/Makefile.am b/events/Makefile.am
-index e496f98..d91d44b 100644
---- a/events/Makefile.am
-+++ b/events/Makefile.am
-@@ -77,6 +77,7 @@ event_files = \
- ppc/e500/events ppc/e500/unit_masks \
- ppc/e500v2/events ppc/e500v2/unit_masks \
- ppc/e500mc/events ppc/e500mc/unit_masks \
-+ ppc/e6500/events ppc/e6500/unit_masks \
- ppc/e300/events ppc/e300/unit_masks \
- tile/tile64/events tile/tile64/unit_masks \
- tile/tilepro/events tile/tilepro/unit_masks \
-diff --git a/events/ppc/e6500/events b/events/ppc/e6500/events
-new file mode 100644
-index 0000000..f34f82d
---- /dev/null
-+++ b/events/ppc/e6500/events
-@@ -0,0 +1,266 @@
-+# e6500 Events
-+#
-+# Copyright (C) 2012 Freescale Semiconductor, Inc.
-+#
-+event:0x1 counters:0,1,2,3,4,5 um:zero minimum:100 name:CPU_CLK : Cycles
-+event:0x2 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_INSNS : Completed Instructions (0, 1, or 2 per cycle)
-+event:0x3 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_OPS : Completed Micro-ops
-+event:0x5 counters:0,1,2,3,4,5 um:zero minimum:500 name:DECODED_OPS : Micro-ops decoded
-+event:0x6 counters:0,1,2,3,4,5 um:zero minimum:500 name:TRANSITIONS_PM_EVENT : 0 to 1 transitions on the pm_event input
-+event:0x7 counters:0,1,2,3,4,5 um:zero minimum:500 name:CPU_CLK_PM_EVENT : Processor cycles that occur when the pm_event input is asserted
-+event:0x8 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_BRANCHES : Branch Instructions completed
-+event:0x9 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_LOAD_OPS : Load micro-ops completed
-+event:0xa counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_STORE_OPS : Store micro-ops completed
-+event:0xb counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETION_REDIRECTS : Number of completion buffer redirects
-+event:0xc counters:0,1,2,3,4,5 um:zero minimum:500 name:BRANCHES_FINISHED : Branches finished
-+event:0xd counters:0,1,2,3,4,5 um:zero minimum:500 name:TAKEN_BRANCHES_FINISHED : Taken branches finished
-+event:0xe counters:0,1,2,3,4,5 um:zero minimum:500 name:TAKEN_BRANCHES_FINISHED_NOT_BTB : Finished unconditional branches that miss the BTB
-+event:0xf counters:0,1,2,3,4,5 um:zero minimum:500 name:BRANCHES_MISPREDICTED : Branch instructions mispredicted due to direction, target, or IAB prediction
-+event:0x10 counters:0,1,2,3,4,5 um:zero minimum:500 name:BRANCHES_MISPREDICTED_DIRECTION : Branches mispredicted due to direction prediction
-+event:0x11 counters:0,1,2,3,4,5 um:zero minimum:500 name:BTB_HITS : Branches that hit in the BTB, or missed but are not taken
-+event:0x12 counters:0,1,2,3,4,5 um:zero minimum:500 name:DECODE_STALLED : Cycles the instruction buffer was not empty, but 0 instructions decoded
-+event:0x13 counters:0,1,2,3,4,5 um:zero minimum:500 name:ISSUE_STALLED : Cycles the SFX/CFX issue queue is not empty but 0 instructions issued
-+event:0x14 counters:0,1,2,3,4,5 um:zero minimum:500 name:BRANCH_ISSUE_STALLED : Cycles the branch buffer is not empty but 0 instructions issued
-+event:0x15 counters:0,1,2,3,4,5 um:zero minimum:500 name:SFX0_SCHEDULE_STALLED : Cycles SFX0 is not empty but 0 instructions scheduled
-+event:0x16 counters:0,1,2,3,4,5 um:zero minimum:500 name:SFX1_SCHEDULE_STALLED : Cycles SFX1 is not empty but 0 instructions scheduled
-+event:0x17 counters:0,1,2,3,4,5 um:zero minimum:500 name:CFX_SCHEDULE_STALLED : Cycles CFX is not empty but 0 instructions scheduled
-+event:0x18 counters:0,1,2,3,4,5 um:zero minimum:500 name:LSU_SCHEDULE_STALLED : Cycles LSU is not empty but 0 instructions scheduled
-+event:0x19 counters:0,1,2,3,4,5 um:zero minimum:500 name:BU_SCHEDULE_STALLED : Cycles BU is not empty but 0 instructions scheduled
-+event:0x1a counters:0,1,2,3,4,5 um:zero minimum:500 name:TOTAL_TRANSLATED : Total LSU micro-ops that reach the second stage of the LSU
-+event:0x1b counters:0,1,2,3,4,5 um:zero minimum:500 name:LOADS_TRANSLATED : Cacheable load micro-ops translated.1 (Does not include WT)
-+event:0x1c counters:0,1,2,3,4,5 um:zero minimum:500 name:STORES_TRANSLATED : Cacheable store micro-ops translated.1 (Does not include WT)
-+event:0x1d counters:0,1,2,3,4,5 um:zero minimum:500 name:TOUCHES_TRANSLATED : Cacheable touch instructions translated. Includes: dcbt / dcbtep dcbtst / dcbtstep icbt ct=2
-+event:0x1e counters:0,1,2,3,4,5 um:zero minimum:500 name:CACHEOPS_TRANSLATED : Number of dcba, dcbf, dcbst, and dcbz instructions translated (e500 traps on dcbi)
-+event:0x1f counters:0,1,2,3,4,5 um:zero minimum:500 name:CACHEINHIBITED_ACCESSES_TRANSLATED : Number of cache inhibited accesses translated
-+event:0x20 counters:0,1,2,3,4,5 um:zero minimum:500 name:GUARDED_LOADS_TRANSLATED : Number of guarded loads translated
-+event:0x21 counters:0,1,2,3,4,5 um:zero minimum:500 name:WRITETHROUGH_STORES_TRANSLATED : Number of write-through stores translated
-+event:0x22 counters:0,1,2,3,4,5 um:zero minimum:500 name:MISALIGNED_ACCESSES_TRANSLATED : Number of misaligned load or store accesses translated.
-+event:0x23 counters:0,1,2,3,4,5 um:zero minimum:500 name:FETCH_2X4_HITS : Each fetch retrieves up to 8 instructions, but only the first 4 are required. This event increments if at least one instruction of the second 4 are actually used.
-+event:0x24 counters:0,1,2,3,4,5 um:zero minimum:500 name:FETCH_HITS_ON_PREFETCHES : Fetch hits on instruction prefetch when the data is still in the ILFB.
-+event:0x25 counters:0,1,2,3,4,5 um:zero minimum:500 name:GENERATED_FETCH_PREFETCHES : Number of prefetches generated.
-+event:0x29 counters:0,1,2,3,4,5 um:zero minimum:500 name:DL1_RELOADS : This is historically used to determine dcache miss rate (along with loads/stores completed). This counts dL1 reloads for any reason.
-+event:0x2c counters:0,1,2,3,4,5 um:zero minimum:500 name:LOAD_MISS_WITH_LOAD_QUEUE_FULL : Counts number of stalls; Com:52 counts cycles stalled. Includes: cacheable loads, CI loads, loadec, larx, touches, ibll, ibsl,ibllsl
-+event:0x2d counters:0,1,2,3,4,5 um:zero minimum:500 name:LOAD_GUARDED_MISS_NOT_LAST_REPLAYS : Load guarded miss when the load is not yet at the bottom of the completion buffer.
-+event:0x2e counters:0,1,2,3,4,5 um:zero minimum:500 name:STORE_TRANSLATED_QUEUE_FULL_REPLAYS : Translate a store when the StQ is full.
-+event:0x2f counters:0,1,2,3,4,5 um:zero minimum:500 name:ADDRESS_COLLISION_REPLAYS : Address collision.
-+event:0x30 counters:0,1,2,3,4,5 um:zero minimum:500 name:DTLB_MISS_REPLAYS : Counts number of stalls; Com:56 counts cycles stalled.
-+event:0x31 counters:0,1,2,3,4,5 um:zero minimum:500 name:DTLB_BUSY_REPLAYS : Counts number of stalls; Com:57 counts cycles stalled.
-+event:0x32 counters:0,1,2,3,4,5 um:zero minimum:500 name:SECOND_PART_MISALIGNED_AFTER_MISS_REPLAYS : Second part of misaligned access when first part missed in cache.
-+event:0x34 counters:0,1,2,3,4,5 um:zero minimum:500 name:LOAD_MISS_QUEUE_FULL_CYCLES : Cycles stalled on replay condition - Load miss with load queue full.
-+event:0x35 counters:0,1,2,3,4,5 um:zero minimum:500 name:LOAD_GUARDED_MISS_NOT_LAST_CYCLES : Cycles stalled on replay condition - Load guarded miss when the load is not yet at the bottom of the completion buffer.
-+event:0x36 counters:0,1,2,3,4,5 um:zero minimum:500 name:STORE_TRANSLATED_QUEUE_FULL_CYCLES : Cycles stalled on replay condition - Translate a store when the StQ is full.
-+event:0x37 counters:0,1,2,3,4,5 um:zero minimum:500 name:ADDRESS_COLLISION_CYCLES : Cycles stalled on replay condition - Address collision.
-+event:0x38 counters:0,1,2,3,4,5 um:zero minimum:500 name:DTLB_MISS_CYCLES : Cycles stalled on replay condition - DTLB miss.
-+event:0x39 counters:0,1,2,3,4,5 um:zero minimum:500 name:DTLB_BUSY_CYCLES : Cycles stalled on replay condition - DTLB busy.
-+event:0x3a counters:0,1,2,3,4,5 um:zero minimum:500 name:SECOND_PART_MISALIGNED_AFTER_MISS_CYCLES : Cycles stalled on replay condition - Second part of misaligned access when first part missed in cache.
-+event:0x3c counters:0,1,2,3,4,5 um:zero minimum:500 name:IL1_FETCH_RELOADS : This is historically used to determine icache miss rate (along with instructions completed) Reloads due to demand fetch.
-+event:0x3d counters:0,1,2,3,4,5 um:zero minimum:500 name:FETCHES : Counts fetches that write at least one instruction to the Instruction Buffer.
-+event:0x3e counters:0,1,2,3,4,5 um:zero minimum:500 name:IMMU_TLB4K_RELOADS : iMMU TLB4K reloads
-+event:0x3f counters:0,1,2,3,4,5 um:zero minimum:500 name:IMMU_VSP_RELOADS : iMMU VSP reloads
-+event:0x40 counters:0,1,2,3,4,5 um:zero minimum:500 name:DMMU_TLB4K_RELOADS : dMMU TLB4K reloads
-+event:0x41 counters:0,1,2,3,4,5 um:zero minimum:500 name:DMMU_VSP_RELOADS : dMMU VSP reloads
-+event:0x42 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2MMU_MISSES : Counts iTLB/dTLB error interrupt
-+event:0x43 counters:0,1,2,3,4,5 um:zero minimum:500 name:TAKEN_BRANCHES : Completed branch instructions that were taken.
-+event:0x44 counters:0,1,2,3,4,5 um:zero minimum:500 name:TAKEN_BLR : Completed blr instructions that were taken.
-+event:0x45 counters:0,1,2,3,4,5 um:zero minimum:500 name:BTB_TARGET_MISPREDICT : Number of target mispredicts (BTB).
-+event:0x46 counters:0,1,2,3,4,5 um:zero minimum:500 name:MISPREDICT_TARGET_BLR : Number of link stack mispredicts (LS).
-+event:0x47 counters:0,1,2,3,4,5 um:zero minimum:500 name:TAKEN_BTB_BUT_MISS : Number of BTB misses, but taken (BTB allocates).
-+event:0x52 counters:0,1,2,3,4,5 um:zero minimum:500 name:PMC0_OVERFLOW : Counts the number of times PMC0[32] transitioned from 1 to 0.
-+event:0x53 counters:0,1,2,3,4,5 um:zero minimum:500 name:PMC1_OVERFLOW : Counts the number of times PMC1[32] transitioned from 1 to 0.
-+event:0x54 counters:0,1,2,3,4,5 um:zero minimum:500 name:PMC2_OVERFLOW : Counts the number of times PMC2[32] transitioned from 1 to 0.
-+event:0x55 counters:0,1,2,3,4,5 um:zero minimum:500 name:PMC3_OVERFLOW : Counts the number of times PMC3[32] transitioned from 1 to 0.
-+event:0x56 counters:0,1,2,3,4,5 um:zero minimum:500 name:INTERRUPTS : Number of interrupts taken
-+event:0x57 counters:0,1,2,3,4,5 um:zero minimum:500 name:EXTERNAL_INTERRUPTS : Number of external input interrupts taken
-+event:0x58 counters:0,1,2,3,4,5 um:zero minimum:500 name:CRITICAL_INTERRUPTS : Number of critical input interrupts taken
-+event:0x59 counters:0,1,2,3,4,5 um:zero minimum:500 name:SC_TRAP_INTERRUPTS : Number of system call and trap interrupts
-+event:0x5a counters:0,1,2,3,4,5 um:zero minimum:500 name:TBL_BIT_TRANS_PMGC0 : Counts transitions of the TBL bit selected by PMGC0[TBSEL].
-+event:0x5b counters:0,1,2,3,4,5 um:zero minimum:500 name:PMC4_OVERFLOW : Counts the number of times PMC4[32] transitioned from 1 to 0.
-+event:0x5c counters:0,1,2,3,4,5 um:zero minimum:500 name:PMC5_OVERFLOW : Counts the number of times PMC5[32] transitioned from 1 to 0.
-+event:0x61 counters:0,1,2,3,4,5 um:zero minimum:500 name:L1_STASH_HIT : Stash hits in L1 Data Cache.
-+event:0x63 counters:0,1,2,3,4,5 um:zero minimum:500 name:L1_STASH_REQ : Stash requests to L1 Data Cache.
-+event:0x64 counters:0,1,2,3,4,5 um:zero minimum:500 name:TIMES_LSU_THREAD_PRIO_SWTICHED : Number of times the Load Store Unit thread priority switched based on resource collisions.
-+event:0x65 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_THREAD_REQ_FPU_DENIED : Number of cycles both threads had Floating Point Unit requests and one was denied.
-+event:0x66 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_THREAD_REQ_VPERM_DENIED : Number of cycles both threads had Altivec Permute requests and one was denied.
-+event:0x67 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_THREAD_REQ_VGEN_DENIED : Number of cycles both threads had Altivec General requests and one was denied.
-+event:0x68 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_THREAD_REQ_CFX_DENIED : Number of cycles both threads had Complex Fixed-Point Unit requests and one was denied.
-+event:0x69 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_THREAD_REQ_FETCH_DENIED : Number of cycles both threads both threads made a Fetch request to the L1 Instruction Cache and one thread wins arbitration.
-+event:0x6e counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_LSU_ISSUE_STALLED : Cycles the LSU issue queue is not empty but 0 instructions issued.
-+event:0x6f counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_FPU_ISSUE_STALLED : Cycles the FPU issue queue is not empty but 0 instructions issued.
-+event:0x70 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_ALTIVEC_ISSUE_STALLED : Cycles the AltiVec issue queue is not empty but 0 instructions issued.
-+event:0x71 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_FPU_SCHEDULE_STALLED : Cycles FPU is not empty but 0 instructions scheduled.
-+event:0x72 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VPERM_SCHEDULE_STALLED : Cycles VPERM is not empty but 0 instructions scheduled.
-+event:0x73 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VGEN_SCHEDULE_STALLED : Cycles VGEN is not empty but 0 instructions scheduled.
-+event:0x74 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VPU_INSTRUCTION_WAIT_FOR_OPERA : Cycles VPU instruction waits for operands.
-+event:0x75 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VFPU_INSTRUCTION_WAIT_FOR_OPERA : Cycles VFPU instruction waits for operands.
-+event:0x76 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VSFX_INSTRUCTION_WAIT_FOR_OPERA : Cycles VSFX instruction waits for operands
-+event:0x77 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VCFX_INSTRUCTION_WAIT_FOR_OPERA : Cycles VCFX instruction waits for operands.
-+event:0x7a counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_IB_EMPT : Number of cycles the Instruction Buffer is empty
-+event:0x7b counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_IB_FULL : Number of cycles the Instruction Buffer is full enough such that fetch stops fetching.
-+event:0x7c counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_CB_EMPT : Number of cycles the Completion Buffer is empty.
-+event:0x7d counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_CB_FULL : Number of cycles the Completion Buffer is full enough such that decode stops.
-+event:0x7e counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_PRESYNC_SI_IB : Number of cycles a pre-sync serialized instruction holds in the Instruction Buffer and is not decoded.
-+event:0x7f counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_CLK_0_INSTRUCTIONS : Increments if 0 instructions (micro-ops) completed.
-+event:0x80 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_CLK_1_INSTRUCTIONS : Increments if 1 instruction (micro-op) completed.
-+event:0x80 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_CLK_2_INSTRUCTIONS : Increments if 2 instructions (micro-op) completed.
-+event:0x88 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_IAC5S : Every valid IAC5 detection.
-+event:0x89 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_IAC6S : Every valid IAC6 detection.
-+event:0x8a counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_IAC7S : Every valid IAC7 detection.
-+event:0x8b counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_IAC8S : Every valid IAC8 detection.
-+event:0x8c counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_IAC1S : Every valid IAC1 detection.
-+event:0x8d counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_IAC2S : Every valid IAC2 detection.
-+event:0x8e counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_IAC3S : Every valid IAC3 detection.
-+event:0x8f counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_IAC4S : Every valid IAC4 detection.
-+event:0x90 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DAC1S : Every valid DAC1 detection.
-+event:0x91 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DAC2S : Every valid DAC2 detection.
-+event:0x94 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DVT0 : Detection of a write to DEVENT SPR with DVT0 set.
-+event:0x95 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DVT1 : Detection of a write to DEVENT SPR with DVT1 set.
-+event:0x96 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DVT2 : Detection of a write to DEVENT SPR with DVT2 set.
-+event:0x97 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DVT3 : Detection of a write to DEVENT SPR with DVT3 set.
-+event:0x98 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DVT4 : Detection of a write to DEVENT SPR with DVT4 set.
-+event:0x99 counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DVT5 : Detection of a write to DEVENT SPR with DVT5 set.
-+event:0x9a counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DVT6 : Detection of a write to DEVENT SPR with DVT6 set.
-+event:0x9b counters:0,1,2,3,4,5 um:zero minimum:500 name:DETECTED_DVT7 : Detection of a write to DEVENT SPR with DVT7 set.
-+event:0x9c counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_COMPLETION_STALLED : Number of completion cycles stalled due to Nexus FIFO full.
-+event:0xa1 counters:0,1,2,3,4,5 um:zero minimum:500 name:FPU_FINISH : FPU finish.
-+event:0xa2 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_FPU_DIV : Counts once for every cycle of divide execution. (fdivs and fdiv).
-+event:0xa3 counters:0,1,2,3,4,5 um:zero minimum:500 name:FPU_DENORM_INPUT : Counts extra cycles delay due to denormalized inputs. If there is one, this is incremented 4 times, Two operands increments it 5 times. This shows the real penalty due to denorms, not just how often they occur.
-+event:0xa4 counters:0,1,2,3,4,5 um:zero minimum:500 name:FPU_DENORM_OUTPUT : FPU denorm output.
-+event:0xa5 counters:0,1,2,3,4,5 um:zero minimum:500 name:FPU_FPSCR_FULL_STALL : FPU FPSCR stall.
-+event:0xa6 counters:0,1,2,3,4,5 um:zero minimum:500 name:FPU_PIPE_SYNC_STALL : Synchronization-op stalls: count once for each cycle that a ��break-before�� FPU is in the RS/issue stage but cannotissue. Also count once for each cycle that an FPU op is in the RS/issue stage but cannot issue due to ��break-after��: of an FPU op currently in progress.
-+event:0xa7 counters:0,1,2,3,4,5 um:zero minimum:500 name:FPU_INPUT_DATA_STALL : FPU data-ready stall: cycles in which there is an op in the RS/issue stage that cannot issue because one or more of its operands is not yet available.
-+event:0xa8 counters:0,1,2,3,4,5 um:zero minimum:500 name:FPU_INSTRUCTIONS_GEN_FLAG : FPU instruction sets FPSCR[FEX].
-+event:0xac counters:0,1,2,3,4,5 um:zero minimum:500 name:PW20_CNT : Number of times the core enters the PW20 power management state.
-+event:0xb0 counters:0,1,2,3,4,5 um:zero minimum:500 name:DECORATED_LOADS : Number of decorated loads to cache inhibited memory performed.
-+event:0xb1 counters:0,1,2,3,4,5 um:zero minimum:500 name:DECORATED_STORES : Number of decorated stores to cache inhibited memory performed.
-+event:0xb3 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_INSTRUCTIONS_SUCC : Number of successful stbcx., sthcx., stwcx., or stdcx. instructions.
-+event:0xb4 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_INSTRUCTIONS_UNSUCC : Number of unsuccessful stbcx., sthcx., stwcx., or stdcx. instructions.
-+event:0xb5 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_LSU_MICROOPS : Completed Load Store Unit micro-ops. Every micro-op that goes down the LSU pipe. Includes: GPR loads / GPR stores, FPR loads / FPR stores, VR loads / VR stores, Cache ops. Memory barriers Other LSU ops (dsn, msgsnd, mvidsplt, mviwsplt, tlbilx, tlbivax, tlbsync)
-+event:0xb6 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_GPR_LOADS : GPR load micro-ops completed. This event only counts once for misaligns. Note that lmw that causes a fault may end up double-counting micro-ops -- once for first pass, once for second pass.
-+event:0xb7 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_GPR_STORES : GPR store micro-ops completed. This event only counts once for misaligns. Note that stmw that causes a fault may end up double-counting micro-ops -- once for first pass, once for second pass.
-+event:0xb8 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_CACHEOPS : Cache ops completed. Includes: dcba / dcbal, dcbf / dcbfep, dcbi, dcblc / dcblq, dcbst / dcbstep, dcbt / dcbtep / dcbtls, dcbtst / dcbtstep / dcbtstls, dcbz / dcbzep / dcbzl / dcbzlep, icbi / icbiep, icblc / icblq., icbt / icbtls
-+event:0xb9 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_MEM_BARRIERS : Memory barriers completed. Includes: msync (sync, lwsync, elemental barriers) mbar (eieio) miso.
-+event:0xba counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_SFX_MICROOPS : SFX micro-ops completed.
-+event:0xbb counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_SINCLK_SFX_MICROOPS : SFX single-cycle micro-ops completed.
-+event:0xbc counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_DBLCLK_SFX_MICROOPS : SFX double-cycle micro-ops completed.
-+event:0xbe counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_CFX_INSTRUCTIONS : CFX instructions completed.
-+event:0xbf counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_SFX_CFX_INSTRUCTIONS : SFX or CFX instructions completed.
-+event:0xc0 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_FPU_INSTRUCTIONS : FPU instructions completed.
-+event:0xc1 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_FPR_MICROOPS_LOADS : FPR load micro-ops completed.
-+event:0xc2 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_FPR_MICROOPS_STORES : FPR store micro-ops completed.
-+event:0xc3 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_FPR_MICROOPS_LOADS_STORES : FPR load and store micro-ops completed.
-+event:0xc4 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_FPR_SINPRECISE_LOADS_STORES : FPR single-precision load and store micro-ops completed.
-+event:0xc5 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_FPR_DBLPRECISE_LOADS_STORES : FPR double-precision load and store micro-ops completed.
-+event:0xc6 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_ALTIVEC_INSTRUCTIONS : AltiVec instructions completed. (non-LSU).
-+event:0xc7 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_ALTIVEC_VSFX_INSTRUCTIONS : AltiVec VSFX instructions completed.
-+event:0xc8 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_ALTIVEC_VCFX_INSTRUCTIONS : AltiVec VCFX instructions completed.
-+event:0xc9 counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_ALTIVEC_VPU_INSTRUCTIONS : AltiVec VPU instructions completed.
-+event:0xca counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_ALTIVEC_VFPU_INSTRUCTIONS : AltiVec VFPU instructions completed.
-+event:0xcb counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_VR_LOADS_MICROOPS : VR load micro-ops completed.
-+event:0xcc counters:0,1,2,3,4,5 um:zero minimum:500 name:COMPLETED_VR_STORES_MICROOPS : VR store micro-ops completed.
-+event:0xcd counters:0,1,2,3,4,5 um:zero minimum:500 name:VSCR_SAT_SET : Number of times the saturate bit flips from 0 to 1.
-+event:0xd2 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_SFX0_IDLE : Cycles Simple Fixed Point Unit 0 is idle.
-+event:0xd3 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_SFX1_IDLE : Cycles Simple Fixed Point Unit 1 is idle.
-+event:0xd4 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_CFX_IDLE : Cycles Complex Fixed Point Unit is idle.
-+event:0xd5 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_LSU_IDLE : Cycles Load Store Unit is idle.
-+event:0xd6 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_BU_IDLE : Cycles Branch Unit is idle.
-+event:0xd7 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_FPU_IDLE : Cycles Floating Point Unit is idle.
-+event:0xd8 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VPU_IDLE : Cycles AltiVec Permute Unit is idle.
-+event:0xd9 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VFPU_IDLE : Cycles AltiVec Floating Point Unit is idle.
-+event:0xda counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VSFX_IDLE : Cycles AltiVec Simple Fixed Point Unit is idle.
-+event:0xdb counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_VCFX_IDLE : Cycles AltiVec Complex Fixed Point Unit is idle.
-+event:0xdd counters:0,1,2,3,4,5 um:zero minimum:500 name:L1_CACHE_MISSES : Data L1 cache misses. (Includes load, store, cache ops).
-+event:0xde counters:0,1,2,3,4,5 um:zero minimum:500 name:L1_CACHE_LOAD_MISSES : Data L1 cache load misses.
-+event:0xdf counters:0,1,2,3,4,5 um:zero minimum:500 name:L1_CACHE_STORE_MISSES : Data L1 cache store misses.
-+event:0xe0 counters:0,1,2,3,4,5 um:zero minimum:500 name:LMQ_ALLOCATED_LOADS : Loads that allocate into Load Miss Queue. (Data L1 cache misses, but may not be to different cache lines).
-+event:0xe1 counters:0,1,2,3,4,5 um:zero minimum:500 name:LOAD_THREAD_MISS_COLLISION : Number of times that this thread��s load hits a line that is valid for the other thread but not this thread.
-+event:0xe2 counters:0,1,2,3,4,5 um:zero minimum:500 name:INTERTHREAD_STATUS_ARRAY_COLLISION : Number of times that two threads collide on status array access.
-+event:0xe3 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_ALLOC : Number of Store Gather Buffer allocates.
-+event:0xe4 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_GATHERS : Number of Store Gather Buffer gathers.
-+event:0xe5 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_OVERFLOWS : Number of Store Gather Buffer overflows. (Causes SGB full condition when additional store request is made).
-+event:0xe6 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_PROMOTIONS : Number of Store Gather Buffer promotions.
-+event:0xe7 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_INORDER_PROMOTIONS : Number of Store Gather Buffer in-order promotions. (Also includes oldest-entry timeout condition).
-+event:0xe8 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_OUTOFORDER_PROMOTIONS : Number of Store Gather Buffer out-of-order promotions.
-+event:0xe9 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_HP_PROMOTIONS : Number of Store Gather Buffer high-priority promotions. (Load hits on pending store).
-+event:0xea counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_MISO_PROMOTIONS : Number of Store Gather Buffer miso promotions. promotions. (Load hits on pending store).
-+event:0xeb counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_WATERMARK_PROMOTIONS : Number of Store Gather Buffer watermark promotions.
-+event:0xec counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_SGB_OVERFLOW_PROMOTIONS : Number of Store Gather Buffer overflow promotions.
-+event:0xed counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_DLAQ_FULL : Number of cycles the DLink Age Queue is full.
-+event:0xee counters:0,1,2,3,4,5 um:zero minimum:500 name:TIMES_DLAQ_FULL : Number of times the DLink Age Queue is full.
-+event:0xef counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_LRSAQ_FULL : Number of cycles the Load Reservation Set Age Queue is full.
-+event:0xf0 counters:0,1,2,3,4,5 um:zero minimum:500 name:TIMES_LRSAQ_FULL : Number of times the Load Reservation Set Age Queue is full.
-+event:0xf1 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_FWDAQ_FULL : Number of cycles the Forward Age Queue is full.
-+event:0xf2 counters:0,1,2,3,4,5 um:zero minimum:500 name:TIMES_FWDAQ_FULL : Number of times the Forward Age Queue is full.
-+event:0xf3 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_FWD_STQ_COLLISION_TIMES : Number of times a Store Queue collision is forwardable. The following cases are not forwardable: store address + size does not contain the load, cache-inhibited store, denormalized, floating point store, stcx, guarded load.
-+event:0xf4 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_FWD_STQ_COLLISION_TIMES_DATA_RDY : Number of times a Store Queue collision is forwardable and is ready with data to forward.
-+event:0xf5 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_FWD_STQ_COLLISION_TIMES_DATA_NORDY : Number of times a Store Queue collision is forwardable but is not ready with data to forward.
-+event:0xf6 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_NOFWD_STQ_COLLISION_TIMES : Number of times a Store Queue collision is not forwardable and must wait until the store leaves the Store Queue.
-+event:0xf7 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_FWD_STQ_COLLISION_CLK : Number of cycles a Store Queue collision is forwardable. (Number of cycles from the detection of a forwardable Store Queue entry until the load is replayed in stg1).
-+event:0xf8 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_FWD_STQ_COLLISION_CLK_DATA_RDY : Number of cycles a Store Queue collision is forwardable and is ready with data to forward. (Number of cycles from the detection of a forwardable Store Queue entry with valid data until the load is replayed in stg1).
-+event:0xf9 counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_FWD_STQ_COLLISION_CLK_DATA_NORDY : Number of cycles a Store Queue collision is forwardable but is not ready with data to forward. (Number of cycles from the detection of a forwardable Store Queue entry without valid data until the load is replayed in stg1).
-+event:0xfa counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_NOFWD_STQ_COLLISION_CLK : Number of cycles a Store Queue collision is not forwardable and has to wait until the store leaves the Store Queue. (Number of cycles from the detection of a non-forwardable Store Queue entry until the load is replayed in stg1).
-+event:0xfb counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_FALSE_EA_COLLISION : Number of times the lower 12-bits of EA matched but the upper bits did not, leading to a false load-on-store replay. Cycle penalty is 4x the number of times.
-+event:0xfc counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_LSO_BUS_COLLISION : Number of LS0 result bus collisions. Cycle penalty is 3x this measurement.
-+event:0xfd counters:0,1,2,3,4,5 um:zero minimum:500 name:NUM_INTERTHREAD_DBLWORKD_BANK_COLLISION : Number of inter-thread double-word bank collisions. Measures when both threads attempt to access the same double-word bank. Cycle penalty is 3x this measurement.
-+event:0xfe counters:0,1,2,3,4,5 um:zero minimum:500 name:L1_CACHE_IM : Instruction L1 cache demand fetch misses. (Includes icbtls. Does not include prefetch).
-+event:0x100 counters:0,1,2,3,4,5 um:zero minimum:500 name:IMMU_MISSES : Counts misses in the level 1 Instruction MMU.
-+event:0x101 counters:0,1,2,3,4,5 um:zero minimum:500 name:IMMU_TLB4K_HITS : Counts hits in the level 1 Instruction MMU TLB-4K.
-+event:0x102 counters:0,1,2,3,4,5 um:zero minimum:500 name:IMMU_VSP_HITS : Counts hits in the level 1 Instruction MMU VSP.
-+event:0x103 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_IMMU_HW_TABLEWALK : Counts IMMU cycles spent in hardware tablewalk. This represents the cycles from the point where the L2 MMU miss occurs to when the page table walk completes with a valid translation or exception.
-+event:0x104 counters:0,1,2,3,4,5 um:zero minimum:500 name:DMMU_MISSES : Counts misses in the level 1 Data MMU. (Does not count replayed operations).
-+event:0x105 counters:0,1,2,3,4,5 um:zero minimum:500 name:DMMU_TLB4K_HITS : Counts hits in the level 1 Data MMU TLB-4K. (Does not count replayed operations).
-+event:0x106 counters:0,1,2,3,4,5 um:zero minimum:500 name:DMMU_VSP_HITS : Counts hits in the level 1 Data MMU VSP. (Does not count replayed operations).
-+event:0x107 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_DMMU_HW_TABLEWALK : Counts DMMU cycles spent in hardware tablewalk. This represents the cycles from the point where the L2 MMU miss occurs to when the page table walk completes with a valid translation or exception.
-+event:0x108 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2MMU_MISSES : Counts level 2 MMU misses. (Does not count misses that occur due to dcbt / dcbtst / dcba / dcbal instructions that fail translation and are no-oped. Does not count misses in L2MMU-VSP when looking up an indirect entry).
-+event:0x109 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2MMU_4K_HITS : Counts level 2 MMU hits in L2MMU-4K.
-+event:0x10a counters:0,1,2,3,4,5 um:zero minimum:500 name:L2MMU_VSP_HITS : Counts level 2 MMU hits in L2MMU-VSP. (Does not count indirect lookups).
-+event:0x10b counters:0,1,2,3,4,5 um:zero minimum:500 name:L2MMU_INDIRECT_MISSES : Counts level 2 MMU indirect misses. This represents indirect entry lookups that do not have a matching indirect entry.
-+event:0x10c counters:0,1,2,3,4,5 um:zero minimum:500 name:L2MMU_INDIRECT_VALID_MISSES : Counts level 2 MMU indirect valid misses. This occurts when the indirect entry is valid, but the corresponding PTE[V] = 0 or the premissions in the PTE are not sufficient for the requested access.
-+event:0x10d counters:0,1,2,3,4,5 um:zero minimum:500 name:LRAT_MISSES : Counts Logical to Real Address Translation misses. This includes LRAT misses from tlbwe instructions or from page table translations.
-+event:0x110 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_LMQ_LOSE_DLINK_DUE_SGB : Cycles the Load Miss Queue loses DLINK arbitration due to the Store Gather Buffer.
-+event:0x111 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_SGB_LOSE_DLINK_DUE_LMQ : Cycles the Store Gather Buffer loses DLINK arbitration due to the Load Miss Queue.
-+event:0x112 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_THREAD_LOSE_DLINK_DUE_OTHER_THREAD : Cycles thread loses DLINK arbitration due to other thread: Cycles thread loses DLINK arbitration due to other thread.
-+event:0x116 counters:0,1,2,3,4,5 um:zero minimum:500 name:DECODE_MASK_VALUE : One mask/value pair that allows instructions to be counted in Decode.
-+event:0x1bb counters:0,1,2,3,4,5 um:zero minimum:500 name:SHR_L2_DLINK_REQ : Number of DLINK requests made from core to Shared L2.
-+event:0x1bc counters:0,1,2,3,4,5 um:zero minimum:500 name:SHR_L2_ILINK_REQ : Number of ILINK requests made from core to Shared L2. (Includes instruction fetches and L2MMU hardware tablewalk requests).
-+event:0x1bd counters:0,1,2,3,4,5 um:zero minimum:500 name:SHR_L2_RLINK_REQ : Number of RLINK requests made from Shared L2 to core. (back invalidates, stashes, barriers).
-+event:0x1be counters:0,1,2,3,4,5 um:zero minimum:500 name:SHR_L2_BLINK_REQ : Number of BLINK requests made from Shared L2 to core. (back invalidates, stashes, barriers).
-+event:0x1bf counters:0,1,2,3,4,5 um:zero minimum:500 name:SHR_L2_CLINK_REQ : Number of CLINK requests made from Shared L2 to core. (back invalidates, stashes, barriers).
-+event:0x1c8 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_HITS : Number of L2 Cache hits. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1c9 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_MISSES : Number of L2 Cache hits. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1ca counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_DEMAND_ACCESS : Number of L2 Cache demand accesses. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1cb counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_ACCESSES : Number of L2 Cache accesses from all sources (demand, reload, snoop, etc). Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1cc counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_STORE_ALLOCATE : Number of L2 Cache store allocates. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1cd counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_INSTRUCTIONS_ACCESS : Number of L2 Cache instruction accesses. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1ce counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_DATA_ACCESS : Number of L2 Cache data accesses. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1cf counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_INSTRUCTIONS_MISSES : Number of L2 Cache instruction misses. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1d0 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_DATA_MISSES : Number of L2 Cache data misses. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1d1 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_HITS_PER_THREAD : Number of times this core/thread hits in the L2 Cache. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1d2 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_MISSES_PER_THREAD : Number of times this core/thread misses in the L2 Cache. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1d3 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_DEMAND_ACCESS_PER_THREAD : Number of times this core/thread makes a demand access to the L2 Cache. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1d4 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_STORE_ALLOC_PER_THREAD : Number of times a store from this core/thread allocates in the L2 Cache. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1d5 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_INSTRUCTIONS_ACCESS_PER_THREAD : Number of times an instruction from this core/thread accesses the L2 Cache. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1d6 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_DATA_ACCESS_PER_THREAD : Number of times a data operation from this core/thread accesses the L2 Cache. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1d7 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_INSTRUCTION_MISSES_PER_THREAD : Number of times an instruction from this core/thread misses in the L2 Cache. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1d8 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_DATA_MISSES_PER_THREAD : Number of times a data operation from this core/thread misses in the L2 Cache. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1d9 counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_RELOAD_FROM_CORENET : Number of L2 Cache reloads from CoreNet. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1da counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_IN_STASH_REQ : Number of incoming L2 Cache stash requests. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1db counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_STASH_REQ_DOWNGRD_TO_SNOOPS : Number of incoming L2 Cache stash requests downgraded to snoops. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1dc counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_SNOOPS_HITS : Number of L2 Cache snoop hits. Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1dd counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_SNOOPS_MINT : Number of L2 Cache snoops causing MINT.
-+event:0x1de counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_SNOOPS_SINT : Number of L2 Cache snoops causing SINT.
-+event:0x1df counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_SNOOPS_PUSHES : Number of L2 Cache snoop pushes.
-+event:0x1e0 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_BIB_STALL : Stall for Back Invalidate Buffer entry (cycles). Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1e2 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_RLT_STALL : Stall for Reload Table entry (cycles). Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1e4 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_RLFQ_STALL : Stall for Reload Fold Queue entry (cycles). Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1e6 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_DTQ_STALL : Stall for Data Transaction Queue entry (cycles). Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1e8 counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_COB_STALL : Stall for Castout Buffer entry (cycles). Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1ea counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_WDB_STALL : Stall for Write Data Buffer entry (cycles). Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1ec counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_RLDB_STALL : Stall for Reload Data Buffer entry (cycles). Counts 0, 1, 2, 3, or 4 per cycle.
-+event:0x1ee counters:0,1,2,3,4,5 um:zero minimum:500 name:CLK_SNPQ_STALL : Stall for Snoop Queue entry (cycles).
-+event:0x1fa counters:0,1,2,3,4,5 um:zero minimum:500 name:BIU_MASTER_REQ : Master transaction starts. (Number of AOut sent to CoreNet).
-+event:0x1fb counters:0,1,2,3,4,5 um:zero minimum:500 name:BIU_MASTER_GLOBAL_REQ : Master transaction starts that are global. (Number of AOut with M=1 sent to CoreNet).
-+event:0x1fc counters:0,1,2,3,4,5 um:zero minimum:500 name:BIU_MASTER_DATA_SIDE_REQ : Master transaction starts that are global. (Number of AOut with M=1 sent to CoreNet).
-+event:0x1fd counters:0,1,2,3,4,5 um:zero minimum:500 name:BIU_MASTER_INSTRUCTION_SIDE_REQ : Master instruction-side transaction starts. (Number of I-side AOut sent to CoreNet).
-+event:0x1fe counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_STASH_REQ : Stash request on AIn matches stash IDs for core or L2.
-+event:0x1ff counters:0,1,2,3,4,5 um:zero minimum:500 name:L2_SNOOP_REQ : Externally generated snoop requests. (Number of AIn from CoreNet not from self).
-+
-diff --git a/events/ppc/e6500/unit_masks b/events/ppc/e6500/unit_masks
-new file mode 100644
-index 0000000..b7e7a23
---- /dev/null
-+++ b/events/ppc/e6500/unit_masks
-@@ -0,0 +1,4 @@
-+# e6500 possible unit masks
-+#
-+name:zero type:mandatory default:0x0
-+ 0x0 no unit mask
-diff --git a/libop/op_cpu_type.c b/libop/op_cpu_type.c
-index 7d50a2d..badb7ba 100644
---- a/libop/op_cpu_type.c
-+++ b/libop/op_cpu_type.c
-@@ -126,6 +126,7 @@ static struct cpu_descr const cpu_descrs[MAX_CPU_TYPE] = {
- { "IBM Power Architected Events V1", "ppc64/architected_events_v1", CPU_PPC64_ARCH_V1, 6 },
- { "ppc64 POWER8", "ppc64/power8", CPU_PPC64_POWER8, 6 },
- { "e500mc", "ppc/e500mc", CPU_PPC_E500MC, 4 },
-+ { "e6500", "ppc/e6500", CPU_PPC_E6500, 6 },
- };
-
- static size_t const nr_cpu_descrs = sizeof(cpu_descrs) / sizeof(struct cpu_descr);
-diff --git a/libop/op_cpu_type.h b/libop/op_cpu_type.h
-index 10f000b..934fe9e 100644
---- a/libop/op_cpu_type.h
-+++ b/libop/op_cpu_type.h
-@@ -106,6 +106,7 @@ typedef enum {
- CPU_PPC64_ARCH_V1, /** < IBM Power architected events version 1 */
- CPU_PPC64_POWER8, /**< ppc64 POWER8 family */
- CPU_PPC_E500MC, /**< e500mc */
-+ CPU_PPC_E6500, /**< e6500 */
- MAX_CPU_TYPE
- } op_cpu;
-
-diff --git a/libop/op_events.c b/libop/op_events.c
-index 638dc5c..9d2aa5e 100644
---- a/libop/op_events.c
-+++ b/libop/op_events.c
-@@ -1309,6 +1309,7 @@ void op_default_event(op_cpu cpu_type, struct op_default_event_descr * descr)
- case CPU_PPC_E500:
- case CPU_PPC_E500_2:
- case CPU_PPC_E500MC:
-+ case CPU_PPC_E6500:
- case CPU_PPC_E300:
- descr->name = "CPU_CLK";
- break;
-diff --git a/utils/ophelp.c b/utils/ophelp.c
-index 0647360..3b2896a 100644
---- a/utils/ophelp.c
-+++ b/utils/ophelp.c
-@@ -754,6 +754,7 @@ int main(int argc, char const * argv[])
- case CPU_PPC_E500:
- case CPU_PPC_E500_2:
- case CPU_PPC_E500MC:
-+ case CPU_PPC_E6500:
- event_doc =
- "See PowerPC e500 Core Complex Reference Manual\n"
- "Chapter 7: Performance Monitor\n"
---
diff --git a/meta/recipes-kernel/oprofile/oprofile/opstart.patch b/meta/recipes-kernel/oprofile/oprofile/opstart.patch
deleted file mode 100644
index 8696f4e..0000000
--- a/meta/recipes-kernel/oprofile/oprofile/opstart.patch
+++ /dev/null
@@ -1,245 +0,0 @@
-Upstream-Status: Pending
-
-The patch gives a low overhead way of starting/stopping oprofile which
-doesn't involve script exection.
-
-(written by RP in OpenedHand days)
-
-diff --git a/utils/Makefile.am b/utils/Makefile.am
-index d34b060..dff15f9 100644
---- oprofile.orig/utils/Makefile.am
-+++ oprofile/utils/Makefile.am
-@@ -7,7 +7,7 @@ AM_LDFLAGS = @OP_LDFLAGS@
-
- LIBS=@POPT_LIBS@ @LIBERTY_LIBS@
-
--bin_PROGRAMS = ophelp op-check-perfevents
-+bin_PROGRAMS = ophelp op-check-perfevents opstart
- dist_bin_SCRIPTS = opcontrol
-
- op_check_perfevents_SOURCES = op_perf_events_checker.c
-@@ -15,3 +15,10 @@ op_check_perfevents_CPPFLAGS = ${AM_CFLAGS} @PERF_EVENT_FLAGS@
-
- ophelp_SOURCES = ophelp.c
- ophelp_LDADD = ../libop/libop.a ../libutil/libutil.a
-+
-+opstart_SOURCES = opstart.c
-+
-+install-exec-local:
-+ cd $(DESTDIR)/$(bindir) && \
-+ rm -f opstop && \
-+ $(LN_S) opstart opstop
-Index: oprofile/utils/opstart.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ oprofile/utils/opstart.c 2008-07-02 15:14:07.000000000 +0100
-@@ -0,0 +1,110 @@
-+/**
-+ * @file opstart.c
-+ * Start/Stop oprofile
-+ *
-+ * @remark Copyright 2007 Openedhand Ltd.
-+ * @remark Read the file COPYING
-+ *
-+ * @author Richard Purdie
-+ */
-+
-+#include <signal.h>
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include <string.h>
-+#include <unistd.h>
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+
-+int main(const int argc, const char* argv[])
-+{
-+ const char *enable = "/dev/oprofile/enable";
-+ const char *lockfile;
-+ unsigned long dpid;
-+ struct stat sbuf;
-+ FILE *lfile, *efile;
-+ int sig, enb, err;
-+
-+ if (argc >= 2) {
-+ printf("Error: Invalid options.\n");
-+ return 1;
-+ }
-+
-+ lockfile = getenv("LOCK_FILE");
-+ if (!lockfile)
-+ lockfile = "/var/lib/oprofile/lock";
-+
-+ /* Add SESSION_DIR support? */
-+
-+ if (geteuid()) {
-+ printf("Error: This program must be run as root.\n");
-+ return 1;
-+ }
-+
-+ if (stat(enable, &sbuf)) {
-+ printf("Error: Could not find /dev/oprofile/enable, the"
-+ " kernel module probably isn't loaded.\n");
-+ printf("This binary only works with 2.6 kernels and oprofile"
-+ " must have been initialised with 'opcontrol --start-daemon'.\n");
-+ return 1;
-+ }
-+
-+ if (stat(lockfile, &sbuf)) {
-+ printf("Error: Could not find lockfile %s.\n", lockfile);
-+ printf("The oprofile daemon must be running (oprofile must"
-+ " have been initialised with 'opcontrol --start-daemon').\n");
-+ return 1;
-+ }
-+
-+ lfile = fopen(lockfile, "r");
-+ if (!lfile) {
-+ printf("Error opening lockfile %s.\n", lockfile);
-+ return 1;
-+ }
-+
-+ err = fscanf(lfile, "%lud", (unsigned long *) &dpid);
-+ if (err != 1) {
-+ printf("Error reading pid from lockfile %s.\n", lockfile);
-+ return 1;
-+ }
-+ fclose(lfile);
-+
-+ efile = fopen(enable, "r");
-+ if (!efile) {
-+ printf("Error opening %s.\n", enable);
-+ return 1;
-+ }
-+
-+ if (strstr(argv[0], "opstart")) {
-+ printf("Starting Profiler\n");
-+ sig = SIGUSR1;
-+ enb = 1;
-+ } else if (strstr(argv[0], "opstop")) {
-+ printf("Stopping Oprofile.\n");
-+ printf("You need to run 'opcontrol --dump' when the session"
-+ " is finished.\n");
-+ sig = SIGUSR2;
-+ enb = 0;
-+ } else {
-+ printf("Error: Please call as 'opstart' or 'opstop'\n");
-+ return 1;
-+ }
-+
-+ err = kill(dpid, 0);
-+ if (err) {
-+ printf("Error sending signal to oprofiled. Stale lockfile"
-+ " (%s) ?\n", lockfile);
-+ return 1;
-+ }
-+
-+ fprintf(efile, "%d\n", enb);
-+ err = kill(dpid, sig);
-+ if (err) {
-+ printf("Error sending signal to oprofiled. Stale lockfile"
-+ " (%s) ?\n", lockfile);
-+ return 1;
-+ }
-+
-+ return 0;
-+}
-+
-Index: oprofile/configure.ac
-===================================================================
---- oprofile.orig/configure.ac 2008-07-02 15:13:58.000000000 +0100
-+++ oprofile/configure.ac 2008-07-02 15:17:37.000000000 +0100
-@@ -16,6 +16,7 @@
- AM_CONFIG_HEADER(config.h)
-
- AC_PROG_RANLIB
-+AC_PROG_LN_S
- AC_PROG_LIBTOOL
-
- dnl for the man page
-@@ -241,6 +242,8 @@
- doc/xsl/catalog-1.xml \
- doc/oprofile.1 \
- doc/opcontrol.1 \
-+ doc/opstart.1 \
-+ doc/opstop.1 \
- doc/ophelp.1 \
- doc/opreport.1 \
- doc/opannotate.1 \
-Index: oprofile/doc/Makefile.am
-===================================================================
---- oprofile.orig/doc/Makefile.am 2008-07-02 15:13:59.000000000 +0100
-+++ oprofile/doc/Makefile.am 2008-07-02 15:14:07.000000000 +0100
-@@ -11,6 +11,8 @@
- man_MANS = \
- oprofile.1 \
- opcontrol.1 \
-+ opstart.1 \
-+ opstop.1 \
- opreport.1 \
- opannotate.1 \
- opgprof.1 \
-Index: oprofile/doc/opstart.1.in
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ oprofile/doc/opstart.1.in 2008-07-02 15:14:07.000000000 +0100
-@@ -0,0 +1,27 @@
-+.TH OPSTART 1 "@DATE@" "oprofile @VERSION@"
-+.UC 4
-+.SH NAME
-+opstart \- start OProfile profiling
-+.SH SYNOPSIS
-+.br
-+.B opstart
-+.SH DESCRIPTION
-+.B opstart
-+is a simple optimised command to start profiling with 2.6 Linux kernels.
-+OProfile should have already been initialised by calling "opcontrol --start-daemon".
-+
-+.SH ENVIRONMENT
-+No special environment variables are recognised by opstart.
-+
-+.SH FILES
-+.TP
-+.I /var/lib/oprofile/samples/
-+The location of the generated sample files.
-+
-+.SH VERSION
-+.TP
-+This man page is current for @PACKAGE@-@VERSION@.
-+
-+.SH SEE ALSO
-+.BR @OP_DOCDIR@,
-+.BR oprofile(1)
-Index: oprofile/doc/opstop.1.in
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ oprofile/doc/opstop.1.in 2008-07-02 15:14:07.000000000 +0100
-@@ -0,0 +1,28 @@
-+.TH OPSTOP 1 "@DATE@" "oprofile @VERSION@"
-+.UC 4
-+.SH NAME
-+opstop \- stop OProfile profiling
-+.SH SYNOPSIS
-+.br
-+.B opstop
-+.SH DESCRIPTION
-+.B opstop
-+is a simple optimsed command to stop profiling with 2.6 Linux kernels.
-+You need to run "opcontrol --dump" before being able to view a profile
-+with opreport.
-+
-+.SH ENVIRONMENT
-+No special environment variables are recognised by opstop.
-+
-+.SH FILES
-+.TP
-+.I /var/lib/oprofile/samples/
-+The location of the generated sample files.
-+
-+.SH VERSION
-+.TP
-+This man page is current for @PACKAGE@-@VERSION@.
-+
-+.SH SEE ALSO
-+.BR @OP_DOCDIR@,
-+.BR oprofile(1)
diff --git a/meta/recipes-kernel/oprofile/oprofile/root-home-dir.patch b/meta/recipes-kernel/oprofile/oprofile/root-home-dir.patch
index 45cab7d..20fc5e5 100644
--- a/meta/recipes-kernel/oprofile/oprofile/root-home-dir.patch
+++ b/meta/recipes-kernel/oprofile/oprofile/root-home-dir.patch
@@ -1,7 +1,7 @@
oprofile: Determine the root home directory dynamically
This commit detects the root home directory dynamically with changes to
-the opcontrol script and the oprofile gui app source.
+the oprofile gui app source.
The commit replaces an earlier fix that detected and adjusted a
'non-standard' root home directory at build time. The advantage of this
@@ -12,109 +12,33 @@ Upstream-Status: inappropriate [OE specific]
Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
-diff --git a/doc/opcontrol.1.in b/doc/opcontrol.1.in
-index c434704..f57eb76 100644
---- a/doc/opcontrol.1.in
-+++ b/doc/opcontrol.1.in
-@@ -171,7 +171,7 @@ No special environment variables are recognised by opcontrol.
-
- .SH FILES
- .TP
--.I /root/.oprofile/daemonrc
-+.I ~root/.oprofile/daemonrc
- Configuration file for opcontrol
- .TP
- .I /var/lib/oprofile/samples/
-diff --git a/doc/oprofile.1.in b/doc/oprofile.1.in
-index 3d0f0ed..5c623e1 100644
---- a/doc/oprofile.1.in
-+++ b/doc/oprofile.1.in
-@@ -150,7 +150,7 @@ No special environment variables are recognised by oprofile.
- .I $HOME/.oprofile/
- Configuration files
- .TP
--.I /root/.oprofile/daemonrc
-+.I ~root/.oprofile/daemonrc
- Configuration file for opcontrol
- .TP
- .I @prefix@/share/oprofile/
-diff --git a/doc/oprofile.html b/doc/oprofile.html
-index 128d9f7..d7e4dea 100644
---- a/doc/oprofile.html
-+++ b/doc/oprofile.html
-@@ -1394,7 +1394,7 @@ The <span class="command"><strong>opcontrol</strong></span> script provides the
- <dd>
- <p>
- Followed by list arguments for profiling set up. List of arguments
-- saved in <code class="filename">/root/.oprofile/daemonrc</code>.
-+ saved in <code class="filename">~root/.oprofile/daemonrc</code>.
- Giving this option is not necessary; you can just directly pass one
- of the setup options, e.g. <span class="command"><strong>opcontrol --no-vmlinux</strong></span>.
- </p>
-@@ -1430,7 +1430,7 @@ The <span class="command"><strong>opcontrol</strong></span> script provides the
- <dd>
- <p>
- Start data collection with either arguments provided by <code class="option">--setup</code>
-- or information saved in <code class="filename">/root/.oprofile/daemonrc</code>. Specifying
-+ or information saved in <code class="filename">~root/.oprofile/daemonrc</code>. Specifying
- the addition <code class="option">--verbose</code> makes the daemon generate lots of debug data
- whilst it is running.
+Index: oprofile-1.0.0/doc/oprofile.html
+===================================================================
+--- oprofile-1.0.0.orig/doc/oprofile.html 2014-11-03 17:55:31.511034857 +0000
++++ oprofile-1.0.0/doc/oprofile.html 2014-11-03 17:57:26.415037988 +0000
+@@ -1563,8 +1563,8 @@
+ <span class="emphasis"><em>must</em></span> stop it in a controlled manner in order to process
+ the profile data it has collected. Use <code class="code">kill -SIGINT <operf-PID></code>
+ for this purpose. It is recommended that when running <span class="command"><strong>operf</strong></span>
+- with this option, your current working directory should be <code class="filename">/root</code> or a subdirectory
+- of <code class="filename">/root</code> to avoid storing sample data files in locations accessible by regular users.
++ with this option, your current working directory should be <code class="filename">~root</code> or a subdirectory
++ of <code class="filename">~root</code> to avoid storing sample data files in locations accessible by regular users.
</p>
-diff --git a/doc/oprofile.xml b/doc/oprofile.xml
-index 6a17c6d..0968d76 100644
---- a/doc/oprofile.xml
-+++ b/doc/oprofile.xml
-@@ -568,7 +568,7 @@ The <command>opcontrol</command> script provides the following actions :
- <term><option>--setup</option></term>
- <listitem><para>
- Followed by list arguments for profiling set up. List of arguments
-- saved in <filename>/root/.oprofile/daemonrc</filename>.
-+ saved in <filename>~root/.oprofile/daemonrc</filename>.
- Giving this option is not necessary; you can just directly pass one
- of the setup options, e.g. <command>opcontrol --no-vmlinux</command>.
- </para></listitem>
-@@ -592,7 +592,7 @@ The <command>opcontrol</command> script provides the following actions :
- <term><option>--start</option></term>
- <listitem><para>
- Start data collection with either arguments provided by <option>--setup</option>
-- or information saved in <filename>/root/.oprofile/daemonrc</filename>. Specifying
-+ or information saved in <filename>~root/.oprofile/daemonrc</filename>. Specifying
- the addition <option>--verbose</option> makes the daemon generate lots of debug data
- whilst it is running.
+ </dd>
+ <dt>
+Index: oprofile-1.0.0/doc/oprofile.xml
+===================================================================
+--- oprofile-1.0.0.orig/doc/oprofile.xml 2014-11-03 17:55:31.515034857 +0000
++++ oprofile-1.0.0/doc/oprofile.xml 2014-11-03 17:58:03.719039005 +0000
+@@ -654,8 +654,8 @@
+ <emphasis>must</emphasis> stop it in a controlled manner in order to process
+ the profile data it has collected. Use <code>kill -SIGINT <operf-PID></code>
+ for this purpose. It is recommended that when running <command>operf</command>
+- with this option, your current working directory should be <filename>/root</filename> or a subdirectory
+- of <filename>/root</filename> to avoid storing sample data files in locations accessible by regular users.
++ with this option, your current working directory should be <filename>~root</filename> or a subdirectory
++ of <filename>~root</filename> to avoid storing sample data files in locations accessible by regular users.
</para></listitem>
-diff --git a/gui/oprof_start_util.cpp b/gui/oprof_start_util.cpp
-index d293431..d13fa8f 100644
---- a/gui/oprof_start_util.cpp
-+++ b/gui/oprof_start_util.cpp
-@@ -20,6 +20,8 @@
- #include <iostream>
- #include <fstream>
- #include <cstdlib>
-+#include <sys/types.h>
-+#include <pwd.h>
-
- #include <qfiledialog.h>
- #include <qmessagebox.h>
-@@ -39,7 +41,8 @@ namespace {
- // return the ~ expansion suffixed with a '/'
- string const get_config_dir()
- {
-- return "/root";
-+ struct *pw = getpwnam("root");
-+ return pw->pw_dir;
- }
-
- string daemon_pid;
-diff --git a/utils/opcontrol b/utils/opcontrol
-index 09fa5a7..a8acdae 100644
---- a/utils/opcontrol
-+++ b/utils/opcontrol
-@@ -385,7 +385,7 @@ do_init()
- OPROFILED="$OPDIR/oprofiled"
-
- # location for daemon setup information
-- SETUP_DIR="/root/.oprofile"
-+ SETUP_DIR="`grep root /etc/passwd | cut -d: -f6`/.oprofile"
- SETUP_FILE="$SETUP_DIR/daemonrc"
- SEC_SETUP_FILE="$SETUP_DIR/daemonrc_new"
-
+ </varlistentry>
+ <varlistentry>
diff --git a/meta/recipes-kernel/oprofile/oprofile_0.9.9.bb b/meta/recipes-kernel/oprofile/oprofile_0.9.9.bb
deleted file mode 100644
index 63ef6af..0000000
--- a/meta/recipes-kernel/oprofile/oprofile_0.9.9.bb
+++ /dev/null
@@ -1,17 +0,0 @@
-require oprofile.inc
-
-DEPENDS += "virtual/kernel"
-DEPENDS_append_powerpc64 = " libpfm4"
-
-SRC_URI += "${SOURCEFORGE_MIRROR}/${BPN}/${BPN}-${PV}.tar.gz \
- file://0001-Add-rmb-definition-for-AArch64-architecture.patch \
- file://0001-Tidy-powerpc64-bfd-target-check.patch \
- file://0001-Add-freescale-e500mc-support.patch \
- file://0002-Add-freescale-e6500-support.patch \
- "
-SRC_URI[md5sum] = "00aec1287da2dfffda17a9b1c0a01868"
-SRC_URI[sha256sum] = "1e523400daaba7b8d0d15269e977a08b40edfea53970774b69ae130e25117597"
-
-
-S = "${WORKDIR}/oprofile-${PV}"
-
diff --git a/meta/recipes-kernel/oprofile/oprofile_1.0.0.bb b/meta/recipes-kernel/oprofile/oprofile_1.0.0.bb
new file mode 100644
index 0000000..ad48ab3
--- /dev/null
+++ b/meta/recipes-kernel/oprofile/oprofile_1.0.0.bb
@@ -0,0 +1,12 @@
+require oprofile.inc
+
+DEPENDS += "virtual/kernel"
+DEPENDS_append_powerpc64 = " libpfm4"
+
+SRC_URI += "${SOURCEFORGE_MIRROR}/${BPN}/${BPN}-${PV}.tar.gz"
+
+SRC_URI[md5sum] = "ba0b340e5c421a93959776c836ed35b3"
+SRC_URI[sha256sum] = "847110b4ecdcf8c8353cd38f94c1b704aad4bfcd9453e38b88d112cfb7e3c45a"
+
+S = "${WORKDIR}/oprofile-${PV}"
+
--
2.0.2
^ permalink raw reply related [flat|nested] 10+ messages in thread